container/origin-haproxy-router
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
origin-haproxy-router/conf/haproxy-config.template
Jakub Čajka 7e8a323763 Initial commit
2019-01-20 20:30:48 +01:00

582 lines
29 KiB
Text
Raw Permalink Blame History

{{/*
haproxy-config.cfg: contains the main config with helper backends that are used to terminate
encryption before finally sending to a host_be which is the backend that is the final
backend for a route and contains all the endpoints for the service
*/}}
{{- define "/var/lib/haproxy/conf/haproxy.config" }}
{{- $workingDir := .WorkingDir }}
{{- $defaultDestinationCA := .DefaultDestinationCA }}
{{- $router_ip_v4_v6_mode := env "ROUTER_IP_V4_V6_MODE" "v4" }}
{{- /* A bunch of regular expressions. Each should be wrapped in (?:) so that it is safe to include bare */}}
{{- /* quadPattern: Match a quad in an IP address; e.g. 123 */}}
{{- $quadPattern := `(?:[0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])` -}}
{{- /* ipPattern: Match an IPv4 address; e.g. 192.168.21.23 */}}
{{- $ipPattern := printf `(?:%s\.%s\.%s\.%s)` $quadPattern $quadPattern $quadPattern $quadPattern -}}
{{- /* cidrPattern: Match an IP and network size in CIDR form; e.g. 192.168.21.23/24 */}}
{{- $cidrPattern := printf `(?:%s(?:/(?:[0-9]|[1-2][0-9]|3[0-2]))?)` $ipPattern -}}
{{- /* cidrListPattern: Match a space separated list of CIDRs; e.g. 192.168.21.23/24 192.10.2.12 */}}
{{- $cidrListPattern := printf `(?:%s(?: +%s)*)` $cidrPattern $cidrPattern -}}
{{- /* cookie name pattern: */}}
{{- $cookieNamePattern := `[a-zA-Z0-9_-]+` -}}
{{- $timeSpecPattern := `[1-9][0-9]*(us|ms|s|m|h|d)?` }}
{{- /* hsts header in response: */}}
{{- $hstsOptionalTokenPattern := `(?:includeSubDomains|preload)` }}
{{- $hstsPattern := printf `(?:%[1]s[;])*max-age=(?:\d+|"\d+")(?:[;]%[1]s)*` $hstsOptionalTokenPattern -}}
global
maxconn {{env "ROUTER_MAX_CONNECTIONS" "20000"}}
daemon
{{- with (env "ROUTER_SYSLOG_ADDRESS") }}
log {{.}} {{env "ROUTER_LOG_FACILITY" "local1"}} {{env "ROUTER_LOG_LEVEL" "warning"}}
{{- end}}
ca-base /etc/ssl
crt-base /etc/ssl
stats socket /var/lib/haproxy/run/haproxy.sock mode 600 level admin expose-fd listeners
stats timeout 2m
# Increase the default request size to be comparable to modern cloud load balancers (ALB: 64kb), affects
# total memory use when large numbers of connections are open.
tune.maxrewrite 8192
tune.bufsize 32768
# Prevent vulnerability to POODLE attacks
ssl-default-bind-options no-sslv3
# The default cipher suite can be selected from the three sets recommended by https://wiki.mozilla.org/Security/Server_Side_TLS,
# or the user can provide one using the ROUTER_CIPHERS environment variable.
# By default when a cipher set is not provided, intermediate is used.
{{- if eq (env "ROUTER_CIPHERS" "intermediate") "modern" }}
# Modern cipher suite (no legacy browser support) from https://wiki.mozilla.org/Security/Server_Side_TLS
tune.ssl.default-dh-param 2048
ssl-default-bind-ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256
{{ else }}
{{- if eq (env "ROUTER_CIPHERS" "intermediate") "intermediate" }}
# Intermediate cipher suite (default) from https://wiki.mozilla.org/Security/Server_Side_TLS
tune.ssl.default-dh-param 2048
ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
{{ else }}
{{- if eq (env "ROUTER_CIPHERS" "intermediate") "old" }}
# Old cipher suite (maximum compatibility but insecure) from https://wiki.mozilla.org/Security/Server_Side_TLS
tune.ssl.default-dh-param 1024
ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:DES-CBC3-SHA:HIGH:SEED:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!RSAPSK:!aDH:!aECDH:!EDH-DSS-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA:!SRP
{{- else }}
# user provided list of ciphers (Colon separated list as seen above)
# the env default is not used here since we can't get here with empty ROUTER_CIPHERS
tune.ssl.default-dh-param 2048
ssl-default-bind-ciphers {{env "ROUTER_CIPHERS" "ECDHE-ECDSA-CHACHA20-POLY1305"}}
{{- end }}
{{- end }}
{{- end }}
defaults
maxconn {{env "ROUTER_MAX_CONNECTIONS" "20000"}}
# Add x-forwarded-for header.
{{- if ne (env "ROUTER_SYSLOG_ADDRESS") "" }}
{{- if ne (env "ROUTER_SYSLOG_FORMAT") "" }}
log-format {{env "ROUTER_SYSLOG_FORMAT"}}
{{- else }}
option httplog
{{- end }}
log global
{{- end }}
# To configure custom default errors, you can either uncomment the
# line below (server ... 127.0.0.1:8080) and point it to your custom
# backend service or alternatively, you can send a custom 503 error.
#
# server openshift_backend 127.0.0.1:8080
errorfile 503 /var/lib/haproxy/conf/error-page-503.http
timeout connect {{firstMatch $timeSpecPattern (env "ROUTER_DEFAULT_CONNECT_TIMEOUT") "5s"}}
timeout client {{firstMatch $timeSpecPattern (env "ROUTER_DEFAULT_CLIENT_TIMEOUT") "30s"}}
timeout client-fin {{firstMatch $timeSpecPattern (env "ROUTER_CLIENT_FIN_TIMEOUT") "1s"}}
timeout server {{firstMatch $timeSpecPattern (env "ROUTER_DEFAULT_SERVER_TIMEOUT") "30s"}}
timeout server-fin {{firstMatch $timeSpecPattern (env "ROUTER_DEFAULT_SERVER_FIN_TIMEOUT") "1s"}}
timeout http-request {{firstMatch $timeSpecPattern (env "ROUTER_SLOWLORIS_TIMEOUT") "10s" }}
timeout http-keep-alive {{firstMatch $timeSpecPattern (env "ROUTER_SLOWLORIS_HTTP_KEEPALIVE") "300s" }}
# Long timeout for WebSocket connections.
timeout tunnel {{firstMatch $timeSpecPattern (env "ROUTER_DEFAULT_TUNNEL_TIMEOUT") "1h" }}
{{- if isTrue (env "ROUTER_ENABLE_COMPRESSION") }}
compression algo gzip
compression type {{env "ROUTER_COMPRESSION_MIME" "text/html text/plain text/css"}}
{{- end }}
{{ if (gt .StatsPort -1) }}
listen stats
bind :{{if (gt .StatsPort 0)}}{{.StatsPort}}{{else}}1936{{end}}
mode http
# Health check monitoring uri.
monitor-uri /healthz
{{- if and (and (ne .StatsUser "") (ne .StatsPassword "")) (gt .StatsPort 0) }}
# Add your custom health check monitoring failure condition here.
# monitor fail if <condition>
stats enable
stats hide-version
stats realm Haproxy\ Statistics
stats uri /
stats auth {{.StatsUser}}:{{.StatsPassword}}
{{- end }}
{{- end }}
{{ if .BindPorts -}}
frontend public
{{ if eq "v4v6" $router_ip_v4_v6_mode }}
bind :::{{env "ROUTER_SERVICE_HTTP_PORT" "80"}} v4v6
{{- else if eq "v6" $router_ip_v4_v6_mode }}
bind :::{{env "ROUTER_SERVICE_HTTP_PORT" "80"}} v6only
{{- else }}
bind :{{env "ROUTER_SERVICE_HTTP_PORT" "80"}}
{{- end }}
{{- if isTrue (env "ROUTER_USE_PROXY_PROTOCOL") }} accept-proxy{{ end }}
mode http
tcp-request inspect-delay 5s
tcp-request content accept if HTTP
{{- if (eq .StatsPort -1) }}
monitor-uri /_______internal_router_healthz
{{- end }}
# Strip off Proxy headers to prevent HTTpoxy (https://httpoxy.org/)
http-request del-header Proxy
# DNS labels are case insensitive (RFC 4343), we need to convert the hostname into lowercase
# before matching, or any requests containing uppercase characters will never match.
http-request set-header Host %[req.hdr(Host),lower]
# check if we need to redirect/force using https.
acl secure_redirect base,map_reg(/var/lib/haproxy/conf/os_route_http_redirect.map) -m found
redirect scheme https if secure_redirect
use_backend %[base,map_reg(/var/lib/haproxy/conf/os_http_be.map)]
default_backend openshift_default
# public ssl accepts all connections and isn't checking certificates yet certificates to use will be
# determined by the next backend in the chain which may be an app backend (passthrough termination) or a backend
# that terminates encryption in this router (edge)
frontend public_ssl
{{ if eq "v4v6" $router_ip_v4_v6_mode }}
bind :::{{env "ROUTER_SERVICE_HTTPS_PORT" "443"}} v4v6
{{- else if eq "v6" $router_ip_v4_v6_mode }}
bind :::{{env "ROUTER_SERVICE_HTTPS_PORT" "443"}} v6only
{{- else }}
bind :{{env "ROUTER_SERVICE_HTTPS_PORT" "443"}}
{{- end }}
{{- if isTrue (env "ROUTER_USE_PROXY_PROTOCOL") }} accept-proxy{{ end }}
tcp-request inspect-delay 5s
tcp-request content accept if { req_ssl_hello_type 1 }
# if the connection is SNI and the route is a passthrough don't use the termination backend, just use the tcp backend
# for the SNI case, we also need to compare it in case-insensitive mode (by converting it to lowercase) as RFC 4343 says
acl sni req.ssl_sni -m found
acl sni_passthrough req.ssl_sni,lower,map_reg(/var/lib/haproxy/conf/os_sni_passthrough.map) -m found
use_backend be_tcp:%[req.ssl_sni,lower,map_reg(/var/lib/haproxy/conf/os_tcp_be.map)] if sni sni_passthrough
# if the route is SNI and NOT passthrough enter the termination flow
use_backend be_sni if sni
# non SNI requests should enter a default termination backend rather than the custom cert SNI backend since it
# will not be able to match a cert to an SNI host
default_backend be_no_sni
##########################################################################
# TLS SNI
#
# When using SNI we can terminate encryption with custom certificates.
# Certs will be stored in a directory and will be matched with the SNI host header
# which must exist in the CN of the certificate. Certificates must be concatenated
# as a single file (handled by the plugin writer) per the haproxy documentation.
#
# Finally, check re-encryption settings and re-encrypt or just pass along the unencrypted
# traffic
##########################################################################
backend be_sni
server fe_sni 127.0.0.1:{{env "ROUTER_SERVICE_SNI_PORT" "10444"}} weight 1 send-proxy
frontend fe_sni
# terminate ssl on edge
bind 127.0.0.1:{{env "ROUTER_SERVICE_SNI_PORT" "10444"}} ssl no-sslv3
{{- if isTrue (env "ROUTER_STRICT_SNI") }} strict-sni {{ end }}
{{- ""}} crt {{firstMatch ".+" .DefaultCertificate "/var/lib/haproxy/conf/default_pub_keys.pem"}}
{{- ""}} crt-list /var/lib/haproxy/conf/cert_config.map accept-proxy
mode http
# Strip off Proxy headers to prevent HTTpoxy (https://httpoxy.org/)
http-request del-header Proxy
# DNS labels are case insensitive (RFC 4343), we need to convert the hostname into lowercase
# before matching, or any requests containing uppercase characters will never match.
http-request set-header Host %[req.hdr(Host),lower]
# map to backend
# Search from most specific to general path (host case).
# Note: If no match, haproxy uses the default_backend, no other
# use_backend directives below this will be processed.
use_backend %[base,map_reg(/var/lib/haproxy/conf/os_edge_reencrypt_be.map)]
default_backend openshift_default
##########################################################################
# END TLS SNI
##########################################################################
##########################################################################
# TLS NO SNI
#
# When we don't have SNI the only thing we can try to do is terminate the encryption
# using our wild card certificate. Once that is complete we can either re-encrypt
# the traffic or pass it on to the backends
##########################################################################
# backend for when sni does not exist, or ssl term needs to happen on the edge
backend be_no_sni
server fe_no_sni 127.0.0.1:{{env "ROUTER_SERVICE_NO_SNI_PORT" "10443"}} weight 1 send-proxy
frontend fe_no_sni
# terminate ssl on edge
bind 127.0.0.1:{{env "ROUTER_SERVICE_NO_SNI_PORT" "10443"}} ssl no-sslv3 crt {{firstMatch ".+" .DefaultCertificate "/var/lib/haproxy/conf/default_pub_keys.pem"}} accept-proxy
mode http
# Strip off Proxy headers to prevent HTTpoxy (https://httpoxy.org/)
http-request del-header Proxy
# DNS labels are case insensitive (RFC 4343), we need to convert the hostname into lowercase
# before matching, or any requests containing uppercase characters will never match.
http-request set-header Host %[req.hdr(Host),lower]
# map to backend
# Search from most specific to general path (host case).
# Note: If no match, haproxy uses the default_backend, no other
# use_backend directives below this will be processed.
use_backend %[base,map_reg(/var/lib/haproxy/conf/os_edge_reencrypt_be.map)]
default_backend openshift_default
##########################################################################
# END TLS NO SNI
##########################################################################
backend openshift_default
mode http
option forwardfor
#option http-keep-alive
option http-pretend-keepalive
##-------------- app level backends ----------------
{{/*
1. If termination is not set: This is plain http -> http. Create a be_http:<service> backend.
Incoming http traffic is terminated and sent as http to the pods.
2. If termination is type 'edge': This is https -> http. Create a be_edge_http:<service> backend.
Incoming https traffic is terminated and sent as http to the pods.
3. If termination is type 'reencrypt': This is https -> https. Create a be_secure:<service> backend.
Incoming https traffic is terminated and then sent as https to the pods.
4. If termination is type 'passthrough': This is https (or any SNI TLS connection) passthrough.
Create a be_tcp:<service> backend.
Incoming traffic is inspected to get the hostname from the SNI header, but then all traffic is
passed through to the backend pod by just looking at the TCP headers.
*/}}
{{- range $cfgIdx, $cfg := .State }}
{{- if matchValues (print $cfg.TLSTermination) "" "edge" "reencrypt" }}
{{- if (eq $cfg.TLSTermination "") }}
# Plain http backend
backend be_http:{{$cfgIdx}}
{{- else if (eq $cfg.TLSTermination "edge") }}
# Plain http backend but request is TLS, terminated at edge
backend be_edge_http:{{$cfgIdx}}
{{ else if (eq $cfg.TLSTermination "reencrypt") }}
# Secure backend which requires re-encryption
backend be_secure:{{$cfgIdx}}
{{- end }}{{/* end chceck for router type */}}
mode http
option redispatch
option forwardfor
{{- with $balanceAlgo := firstMatch "roundrobin|leastconn|source" (index $cfg.Annotations "haproxy.router.openshift.io/balance") (env "ROUTER_LOAD_BALANCE_ALGORITHM") }}
balance {{ $balanceAlgo }}
{{- else }}
balance {{ if gt $cfg.ActiveServiceUnits 1 }}roundrobin{{ else }}leastconn{{ end }}
{{- end }}
{{- with $ip_whiteList := firstMatch $cidrListPattern (index $cfg.Annotations "haproxy.router.openshift.io/ip_whitelist") }}
acl whitelist src {{ $ip_whiteList }}
tcp-request content reject if !whitelist
{{- end }}
{{- with $value := firstMatch $timeSpecPattern (index $cfg.Annotations "haproxy.router.openshift.io/timeout")}}
timeout server {{$value}}
{{- end }}
{{- if isTrue (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections") }}
stick-table type ip size 100k expire 30s store conn_cur,conn_rate(3s),http_req_rate(10s)
tcp-request content track-sc2 src
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.concurrent-tcp")) }}
tcp-request content reject if { src_conn_cur ge {{ index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.concurrent-tcp" }} }
{{- else }}
# concurrent TCP connections not restricted
{{- end }}
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-tcp")) }}
tcp-request content reject if { src_conn_rate ge {{ index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-tcp" }} }
{{- else }}
#TCP connection rate not restricted
{{- end }}
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-http")) }}
tcp-request content reject if { src_http_req_rate ge {{ index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-http" }} }
{{- else }}
#HTTP request rate not restricted
{{- end }}
{{- end }}
timeout check 5000ms
http-request set-header X-Forwarded-Host %[req.hdr(host)]
http-request set-header X-Forwarded-Port %[dst_port]
http-request set-header X-Forwarded-Proto http if !{ ssl_fc }
http-request set-header X-Forwarded-Proto https if { ssl_fc }
{{- if matchPattern "(v4)?v6" $router_ip_v4_v6_mode }}
# See the quoting rules in https://tools.ietf.org/html/rfc7239 for IPv6 addresses (v4 addresses get translated to v6 when in hybrid mode)
http-request set-header Forwarded for="[%[src]]";host=%[req.hdr(host)];proto=%[req.hdr(X-Forwarded-Proto)]
{{- else }}
http-request set-header Forwarded for=%[src];host=%[req.hdr(host)];proto=%[req.hdr(X-Forwarded-Proto)]
{{- end }}
{{- if not (isTrue (index $cfg.Annotations "haproxy.router.openshift.io/disable_cookies")) }}
cookie {{firstMatch $cookieNamePattern (index $cfg.Annotations "router.openshift.io/cookie_name") (env "ROUTER_COOKIE_NAME" "") $cfg.RoutingKeyName}} insert indirect nocache httponly
{{- if and (matchValues (print $cfg.TLSTermination) "edge" "reencrypt") (ne $cfg.InsecureEdgeTerminationPolicy "Allow") }} secure
{{- end }}
{{- end }}{{/* end disable cookies check */}}
{{- if matchValues (print $cfg.TLSTermination) "edge" "reencrypt" }}
{{- with $hsts := firstMatch $hstsPattern (index $cfg.Annotations "haproxy.router.openshift.io/hsts_header") }}
http-response set-header Strict-Transport-Security {{$hsts}}
{{- end }}{{/* hsts header */}}
{{- end }}{{/* is "edge" or "reencrypt" */}}
{{- range $serviceUnitName, $weight := $cfg.ServiceUnitNames }}
{{- if ne $weight 0 }}
{{- with $serviceUnit := index $.ServiceUnits $serviceUnitName }}
{{- range $idx, $endpoint := processEndpointsForAlias $cfg $serviceUnit (env "ROUTER_BACKEND_PROCESS_ENDPOINTS" "") }}
server {{$endpoint.ID}} {{$endpoint.IP}}:{{$endpoint.Port}} cookie {{$endpoint.IdHash}} weight {{$weight}}
{{- if (eq $cfg.TLSTermination "reencrypt") }} ssl
{{- if $cfg.VerifyServiceHostname }} verifyhost {{ $serviceUnit.Hostname }}
{{- end }}
{{- if gt (len (index $cfg.Certificates (printf "%s_pod" $cfg.Host)).Contents) 0 }} verify required ca-file {{ $workingDir }}/cacerts/{{$cfgIdx}}.pem
{{- else }}
{{- if gt (len $defaultDestinationCA) 0 }} verify required ca-file {{ $defaultDestinationCA }}
{{- else }} verify none
{{- end }}
{{- end }}
{{- else if or (eq $cfg.TLSTermination "") (eq $cfg.TLSTermination "edge") }}
{{- end }}{{/* end type specific options*/}}
{{- if and (not $endpoint.NoHealthCheck) (gt $cfg.ActiveEndpoints 1) }} check inter {{firstMatch $timeSpecPattern (index $cfg.Annotations "router.openshift.io/haproxy.health.check.interval") (env "ROUTER_BACKEND_CHECK_INTERVAL") "5000ms"}}
{{- end }}{{/* end else no health check */}}
{{- with $podMaxConn := index $cfg.Annotations "haproxy.router.openshift.io/pod-concurrent-connections" }}
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/pod-concurrent-connections")) }} maxconn {{$podMaxConn}} {{- end }}
{{- end}}{{/* end pod-concurrent-connections annotation */}}
{{- end }}{{/* end if cg.TLSTermination */}}
{{- end }}{{/* end range processEndpointsForAlias */}}
{{- end }}{{/* end get serviceUnit from its name */}}
{{- end }}{{/* end range over serviceUnitNames */}}
{{- end }}{{/* end if tls==edge/none/reencrypt */}}
{{- if eq $cfg.TLSTermination "passthrough" }}
# Secure backend, pass through
backend be_tcp:{{$cfgIdx}}
{{- if ne (env "ROUTER_SYSLOG_ADDRESS") ""}}
option tcplog
{{- end }}
{{- with $balanceAlgo := firstMatch "roundrobin|leastconn|source" (index $cfg.Annotations "haproxy.router.openshift.io/balance") (env "ROUTER_LOAD_BALANCE_ALGORITHM") }}
balance {{ $balanceAlgo }}
{{- else }}
balance {{ if gt $cfg.ActiveServiceUnits 1 }}roundrobin{{ else }}source{{ end }}
{{- end }}
{{- with $ip_whiteList := firstMatch $cidrListPattern (index $cfg.Annotations "haproxy.router.openshift.io/ip_whitelist") }}
acl whitelist src {{$ip_whiteList}}
tcp-request content reject if !whitelist
{{- end }}
{{- with $value := firstMatch $timeSpecPattern (index $cfg.Annotations "haproxy.router.openshift.io/timeout")}}
timeout tunnel {{$value}}
{{- end }}
{{- if isTrue (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections") }}
stick-table type ip size 100k expire 30s store conn_cur,conn_rate(3s),http_req_rate(10s)
tcp-request content track-sc2 src
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.concurrent-tcp")) }}
tcp-request content reject if { src_conn_cur ge {{ index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.concurrent-tcp" }} }
{{- else }}
# concurrent TCP connections not restricted
{{- end }}
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-tcp")) }}
tcp-request content reject if { src_conn_rate ge {{ index $cfg.Annotations "haproxy.router.openshift.io/rate-limit-connections.rate-tcp" }} }
{{- else }}
#TCP connection rate not restricted
{{- end }}
{{- end }}
hash-type consistent
timeout check 5000ms
{{- range $serviceUnitName, $weight := $cfg.ServiceUnitNames }}
{{- if ne $weight 0 }}
{{- with $serviceUnit := index $.ServiceUnits $serviceUnitName }}
{{- range $idx, $endpoint := processEndpointsForAlias $cfg $serviceUnit (env "ROUTER_BACKEND_PROCESS_ENDPOINTS" "") }}
server {{$endpoint.ID}} {{$endpoint.IP}}:{{$endpoint.Port}} weight {{$weight}}
{{- if and (not $endpoint.NoHealthCheck) (gt $cfg.ActiveEndpoints 1) }} check inter {{firstMatch $timeSpecPattern (index $cfg.Annotations "router.openshift.io/haproxy.health.check.interval") (env "ROUTER_BACKEND_CHECK_INTERVAL") "5000ms"}}
{{- end }}{{/* end else no health check */}}
{{- with $podMaxConn := index $cfg.Annotations "haproxy.router.openshift.io/pod-concurrent-connections" }}
{{- if (isInteger (index $cfg.Annotations "haproxy.router.openshift.io/pod-concurrent-connections")) }} maxconn {{$podMaxConn}} {{- end }}
{{- end}}{{/* end pod-concurrent-connections annotation */}}
{{- end }}{{/* end range processEndpointsForAlias */}}
{{- end }}{{/* end get ServiceUnit from serviceUnitName */}}
{{- end }}{{/* end if weight != 0 */}}
{{- end }}{{/* end iterate over services*/}}
{{- end }}{{/*end tls==passthrough*/}}
{{- end }}{{/* end loop over routes */}}
{{- else }}
# Avoiding binding ports until routing configuration has been synchronized.
{{- end }}{{/* end bind ports after sync */}}
{{ end }}{{/* end haproxy config template */}}
{{/*--------------------------------- END OF HAPROXY CONFIG, BELOW ARE MAPPING FILES ------------------------*/}}
{{/*
os_wildcard_domain.map: contains a mapping of wildcard hosts for a
[sub]domain regexps. This map is used to check if
a host matches a [sub]domain with has wildcard support.
*/}}
{{ define "/var/lib/haproxy/conf/os_wildcard_domain.map" -}}
{{ if isTrue (env "ROUTER_ALLOW_WILDCARD_ROUTES") -}}
{{ range $idx, $cfg := .State -}}
{{ if ne $cfg.Host "" -}}
{{ if $cfg.IsWildcard -}}
{{generateRouteRegexp $cfg.Host "" true}} 1
{{ end -}}
{{ end -}}
{{ end -}}
{{ end -}}{{/* end if router allows wildcard routes */}}
{{ end -}}{{/* end wildcard domain map template */}}
{{/*
os_http_be.map : contains a mapping of www.example.com -> <service name>. This map is used to discover the correct backend
by attaching a prefix: be_http for http routes
be_edge_http for edge routes with InsecureEdgeTerminationPolicy Allow
be_secure for reencrypt routes with InsecureEdgeTerminationPolicy Allow
*/}}
{{ define "/var/lib/haproxy/conf/os_http_be.map" -}}
{{ range $idx, $cfg := .State -}}
{{ if and (ne $cfg.Host "") (eq $cfg.TLSTermination "") -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} be_http:{{$idx}}
{{ end -}}
{{ if and (ne $cfg.Host "") (and (matchValues (print $cfg.TLSTermination) "edge" "reencrypt") (eq $cfg.InsecureEdgeTerminationPolicy "Allow")) -}}
{{ if (eq $cfg.TLSTermination "edge") -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} be_edge_http:{{$idx}}
{{ else -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} be_secure:{{$idx}}
{{ end -}}
{{ end -}}
{{ end -}}
{{ end -}}
{{/*
os_edge_reencrypt_be.map : contains a mapping of www.example.com -> <service name>. This map is similar to os_http_be.map but for tls routes.
by attaching prefix: be_edge_http for edge terminated routes
be_secure for reencrypt routes
*/}}
{{ define "/var/lib/haproxy/conf/os_edge_reencrypt_be.map" -}}
{{ range $idx, $cfg := .State -}}
{{ if and (ne $cfg.Host "") (eq $cfg.TLSTermination "edge") -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} be_edge_http:{{$idx}}
{{ end -}}
{{ if and (ne $cfg.Host "") (eq $cfg.TLSTermination "reencrypt") -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} be_secure:{{$idx}}
{{ end -}}
{{ end -}}
{{ end -}}{{/* end edge http host map template */}}
{{/*
os_route_http_redirect.map: contains a mapping of www.example.com -> <service name>.
Map is used to redirect insecure traffic to use a secure scheme (https)
if acls match for routes that have the insecure option set to redirect.
*/}}
{{ define "/var/lib/haproxy/conf/os_route_http_redirect.map" -}}
{{ range $idx, $cfg := .State -}}
{{ if and (ne $cfg.Host "") (eq $cfg.InsecureEdgeTerminationPolicy "Redirect") -}}
{{generateRouteRegexp $cfg.Host $cfg.Path $cfg.IsWildcard}} {{$idx}}
{{ end -}}
{{ end -}}
{{ end -}}{{/* end redirect http host map template */}}
{{/*
os_tcp_be.map: contains a mapping of www.example.com -> <service name>. This map is used to discover the correct backend
by attaching a prefix (be_tcp: or be_secure:) by use_backend statements if acls are matched.
*/}}
{{ define "/var/lib/haproxy/conf/os_tcp_be.map" -}}
{{ range $idx, $cfg := .State -}}
{{ if and (eq $cfg.Path "") (and (ne $cfg.Host "") (matchValues (print $cfg.TLSTermination) "passthrough" "reencrypt")) -}}
{{generateRouteRegexp $cfg.Host "" $cfg.IsWildcard}} {{$idx}}
{{ end -}}
{{ end -}}
{{ end -}}{{/* end tcp host map template */}}
{{/*
os_sni_passthrough.map: contains a mapping of routes that expect to have an sni header and should be passed
through to the host_be. Driven by the termination type of the ServiceAliasConfigs
*/}}
{{ define "/var/lib/haproxy/conf/os_sni_passthrough.map" -}}
{{ range $idx, $cfg := .State -}}
{{ if and (eq $cfg.Path "") (eq $cfg.TLSTermination "passthrough") -}}
{{generateRouteRegexp $cfg.Host "" $cfg.IsWildcard}} 1
{{ end -}}
{{ end -}}
{{ end -}}{{/* end sni passthrough map template */}}
{{/*
cert_config.map: contains a mapping of <cert-file> -> example.org
This map is used to present the appropriate cert
based on the sni header.
Note: It is sort of a reverse map for our case but the order
"<cert>: <domain-set>" is important as this allows us to use
wildcards and/or use a deny set with !<domain> in the future.
*/}}
{{ define "/var/lib/haproxy/conf/cert_config.map" -}}
{{ $workingDir := .WorkingDir -}}
{{ range $idx, $cfg := .State -}}
{{ if and (ne $cfg.Host "") (matchValues (print $cfg.TLSTermination) "edge" "reencrypt") -}}
{{ $cert := index $cfg.Certificates $cfg.Host -}}
{{ if ne $cert.Contents "" -}}
{{$workingDir}}/certs/{{$idx}}.pem {{genCertificateHostName $cfg.Host $cfg.IsWildcard}}
{{ end -}}
{{ end -}}
{{ end -}}
{{ end }}{{/* end cert_config map template */}}
Reference in a new issue View git blame Copy permalink