Container not being built in Fedora infrastructure for years, check gitlab.com/sclorg instead

Add upstream -> downstream configuration file
Signed-off-by: Petr "Stone" Hracek <phracek@redhat.com>
2026-01-15 11:28:24 +01:00 · 2021-03-16 10:19:03 +01:00
22 changed files with 1 additions and 3637 deletions
--- a/.gitignore
+++ b/.gitignore
--- a/.s2i/bin/assemble
+++ b/.s2i/bin/assemble
@ -1,29 +0,0 @@
 #!/bin/bash
 set -e
 shopt -s dotglob
 echo "---> Installing application source..."
 mv /tmp/src/* ./
 if [ -f composer.json ]; then
  echo "Found 'composer.json', installing dependencies using composer.phar... "
  # Install Composer
  curl https://getcomposer.org/installer | php
  # Change the repo mirror if provided
  if [ -n "$COMPOSER_MIRROR" ]; then
    ./composer.phar config -g repositories.packagist composer $COMPOSER_MIRROR
  fi
  # Install App dependencies using Composer
  ./composer.phar install --no-interaction --no-ansi --optimize-autoloader
  if [ ! -f composer.lock ]; then
    echo -e "\nConsider adding a 'composer.lock' file into your source repository.\n"
  fi
 fi
 # Fix source directory permissions
 fix-permissions ./
--- a/.s2i/bin/run
+++ b/.s2i/bin/run
@ -1,48 +0,0 @@
 #!/bin/bash
 export_vars=$(cgroup-limits); export $export_vars
 export DOCUMENTROOT=${DOCUMENTROOT:-/}
 # Default php.ini configuration values, all taken
 # from php defaults.
 export ERROR_REPORTING=${ERROR_REPORTING:-E_ALL & ~E_NOTICE}
 export DISPLAY_ERRORS=${DISPLAY_ERRORS:-ON}
 export DISPLAY_STARTUP_ERRORS=${DISPLAY_STARTUP_ERRORS:-OFF}
 export TRACK_ERRORS=${TRACK_ERRORS:-OFF}
 export HTML_ERRORS=${HTML_ERRORS:-ON}
 export INCLUDE_PATH=${INCLUDE_PATH:-.:/opt/app-root/src:/usr/share/pear}
 export SESSION_PATH=${SESSION_PATH:-/tmp/sessions}
 export SHORT_OPEN_TAG=${SHORT_OPEN_TAG:-OFF}
 # TODO should be dynamically calculated based on container memory limit/16
 export OPCACHE_MEMORY_CONSUMPTION=${OPCACHE_MEMORY_CONSUMPTION:-128}
 export OPCACHE_REVALIDATE_FREQ=${OPCACHE_REVALIDATE_FREQ:-2}
 export PHPRC=${PHPRC:-/etc/php.ini}
 export PHP_INI_SCAN_DIR=${PHP_INI_SCAN_DIR:-/etc/php.d}
 envsubst < /opt/app-root/etc/php.ini.template > /etc/php.ini
 envsubst < /opt/app-root/etc/php.d/10-opcache.ini.template > /etc/php.d/10-opcache.ini
 export HTTPD_START_SERVERS=${HTTPD_START_SERVERS:-8}
 export HTTPD_MAX_SPARE_SERVERS=$((HTTPD_START_SERVERS+10))
 if [ -n "${NO_MEMORY_LIMIT:-}" -o -z "${MEMORY_LIMIT_IN_BYTES:-}" ]; then
  #
  export HTTPD_MAX_REQUEST_WORKERS=${HTTPD_MAX_REQUEST_WORKERS:-256}
 else
  # A simple calculation for MaxRequestWorkers would be: Total Memory / Size Per Apache process.
  # The total memory is determined from the Cgroups and the average size for the
  # Apache process is estimated to 15MB.
  max_clients_computed=$((MEMORY_LIMIT_IN_BYTES/1024/1024/15))
  # The MaxClients should never be lower than StartServers, which is set to 5.
  # In case the container has memory limit set to <64M we pin the MaxClients to 4.
  [[ $max_clients_computed -le 4 ]] && max_clients_computed=4
  export HTTPD_MAX_REQUEST_WORKERS=${HTTPD_MAX_REQUEST_WORKERS:-$max_clients_computed}
  echo "-> Cgroups memory limit is set, using HTTPD_MAX_REQUEST_WORKERS=${HTTPD_MAX_REQUEST_WORKERS}"
 fi
 envsubst < /opt/app-root/etc/conf.d/50-mpm-tuning.conf.template > /opt/app-root/etc/conf.d/50-mpm-tuning.conf
 envsubst < /opt/app-root/etc/conf.d/00-documentroot.conf.template > /opt/app-root/etc/conf.d/00-documentroot.conf
 exec httpd -D FOREGROUND
--- a/.s2i/bin/usage
+++ b/.s2i/bin/usage
@ -1,12 +0,0 @@
 #!/bin/bash -e
 cat <<EOF
 This is the php S2I image:
 To use it, install S2I: https://github.com/openshift/source-to-image
 Sample invocation:
 s2i build <source code path/URL> php <application image>
 You can then run the resulting image via:
 docker run <application image>
 EOF
--- a/84
+++ b/84
@ -1,84 +0,0 @@
 FROM registry.fedoraproject.org/fedora:26
 # Description
 # This image provides an Apache 2.4 + PHP 7.0 environment for running PHP applications.
 # Exposed ports:
 # * 8080 - alternative port for http
 # Additional packages
 #  * git, zip, unzip are needed for composer
 #  * gettext is needed for `envsubst` command used by scripts
 #  * findutils for fixing permissions
 #  * python for cgroup limits helper script
 LABEL MAINTAINER Rado Pitonak <rpitonak@redhat.com>
 RUN dnf install -y --setopt=tsflags=nodocs php php-opcache && \
    dnf install -y --setopt=tsflags=nodocs httpd && \
    dnf install -y --setopt=tsflags=nodocs git gettext zip unzip findutils python && \
    dnf -y clean all
 ENV PHP_VERSION=7.0 \
    NAME=php\
    VERSION=0 \
    RELEASE=1 \
    ARCH=x86_64
 ENV HOME=/opt/app-root
 LABEL summary="php runtime" \
      name="$FGC/$NAME" \
      version="$VERSION" \
      release="$RELEASE.$DISTTAG" \
      architecture="$ARCH" \
      description="Platform for building and running PHP 7.0 applications." \
      vendor="Fedora Project" \
      com.redhat.component="$NAME" \
      usage="s2i build <SOURCE-REPOSITORY> php <APP-NAME>" \
      org.fedoraproject.component="php" \
      authoritative-source-url="registry.fedoraproject.org" \
      io.k8s.description="Platform for building and running PHP 7.0 applications." \
      io.k8s.display-name="Apache 2.4 with PHP 7.0" \
      io.openshift.tags="builder,php,php70" \
      io.openshift.expose-services="8080:https" \
      io.openshift.s2i.scripts-url="image:///usr/local/s2i"
 # S2I scripts
 COPY ./.s2i/bin/ /usr/local/s2i
 # Copy executable utilities.
 COPY bin/ /usr/bin/
 # Each language image can have 'contrib' a directory with extra files needed to
 # run and build the applications.
 COPY ./contrib/ /opt/app-root
 # Add help file
 COPY root /
 EXPOSE 8080
 RUN mkdir -p ${HOME} && \
    useradd -u 1001 -r -g 0 -d ${HOME} -s /sbin/nologin \
    -c "Default user" default
 # In order to drop the root user, we have to make some directories world
 # writeable as OpenShift default security model is to run the container under
 # random UID.
 RUN mkdir -p ${HOME}/src && \
    sed -i -f /opt/app-root/etc/httpdconf.sed /etc/httpd/conf/httpd.conf && \
    head -n151 /etc/httpd/conf/httpd.conf | tail -n1 | grep "AllowOverride All" || exit && \
    echo "IncludeOptional /opt/app-root/etc/conf.d/*.conf" >> /etc/httpd/conf/httpd.conf && \
    mkdir /tmp/sessions && \
    chown -R 1001:0 /opt/app-root /tmp/sessions && \
    chmod -R a+rwx /tmp/sessions && \
    chmod -R ug+rwx /opt/app-root && \
    chmod -R a+rwx /etc/php.d && \
    chmod -R a+rwx /etc/php.ini && \
    chmod -R a+rwx /run/httpd
 USER 1001
 WORKDIR ${HOME}/src
 # Command which will start service during command `docker run`
 CMD /usr/local/s2i/usage
--- a/674
+++ b/674
@ -1,674 +0,0 @@
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007
 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.
                            Preamble
  The GNU General Public License is a free, copyleft license for
 software and other kinds of works.
  The licenses for most software and other practical works are designed
 to take away your freedom to share and change the works.  By contrast,
 the GNU General Public License is intended to guarantee your freedom to
 share and change all versions of a program--to make sure it remains free
 software for all its users.  We, the Free Software Foundation, use the
 GNU General Public License for most of our software; it applies also to
 any other work released this way by its authors.  You can apply it to
 your programs, too.
  When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
 them if you wish), that you receive source code or can get it if you
 want it, that you can change the software or use pieces of it in new
 free programs, and that you know you can do these things.
  To protect your rights, we need to prevent others from denying you
 these rights or asking you to surrender the rights.  Therefore, you have
 certain responsibilities if you distribute copies of the software, or if
 you modify it: responsibilities to respect the freedom of others.
  For example, if you distribute copies of such a program, whether
 gratis or for a fee, you must pass on to the recipients the same
 freedoms that you received.  You must make sure that they, too, receive
 or can get the source code.  And you must show them these terms so they
 know their rights.
  Developers that use the GNU GPL protect your rights with two steps:
 (1) assert copyright on the software, and (2) offer you this License
 giving you legal permission to copy, distribute and/or modify it.
  For the developers' and authors' protection, the GPL clearly explains
 that there is no warranty for this free software.  For both users' and
 authors' sake, the GPL requires that modified versions be marked as
 changed, so that their problems will not be attributed erroneously to
 authors of previous versions.
  Some devices are designed to deny users access to install or run
 modified versions of the software inside them, although the manufacturer
 can do so.  This is fundamentally incompatible with the aim of
 protecting users' freedom to change the software.  The systematic
 pattern of such abuse occurs in the area of products for individuals to
 use, which is precisely where it is most unacceptable.  Therefore, we
 have designed this version of the GPL to prohibit the practice for those
 products.  If such problems arise substantially in other domains, we
 stand ready to extend this provision to those domains in future versions
 of the GPL, as needed to protect the freedom of users.
  Finally, every program is threatened constantly by software patents.
 States should not allow patents to restrict development and use of
 software on general-purpose computers, but in those that do, we wish to
 avoid the special danger that patents applied to a free program could
 make it effectively proprietary.  To prevent this, the GPL assures that
 patents cannot be used to render the program non-free.
  The precise terms and conditions for copying, distribution and
 modification follow.
                       TERMS AND CONDITIONS
  0. Definitions.
  "This License" refers to version 3 of the GNU General Public License.
  "Copyright" also means copyright-like laws that apply to other kinds of
 works, such as semiconductor masks.
  "The Program" refers to any copyrightable work licensed under this
 License.  Each licensee is addressed as "you".  "Licensees" and
 "recipients" may be individuals or organizations.
  To "modify" a work means to copy from or adapt all or part of the work
 in a fashion requiring copyright permission, other than the making of an
 exact copy.  The resulting work is called a "modified version" of the
 earlier work or a work "based on" the earlier work.
  A "covered work" means either the unmodified Program or a work based
 on the Program.
  To "propagate" a work means to do anything with it that, without
 permission, would make you directly or secondarily liable for
 infringement under applicable copyright law, except executing it on a
 computer or modifying a private copy.  Propagation includes copying,
 distribution (with or without modification), making available to the
 public, and in some countries other activities as well.
  To "convey" a work means any kind of propagation that enables other
 parties to make or receive copies.  Mere interaction with a user through
 a computer network, with no transfer of a copy, is not conveying.
  An interactive user interface displays "Appropriate Legal Notices"
 to the extent that it includes a convenient and prominently visible
 feature that (1) displays an appropriate copyright notice, and (2)
 tells the user that there is no warranty for the work (except to the
 extent that warranties are provided), that licensees may convey the
 work under this License, and how to view a copy of this License.  If
 the interface presents a list of user commands or options, such as a
 menu, a prominent item in the list meets this criterion.
  1. Source Code.
  The "source code" for a work means the preferred form of the work
 for making modifications to it.  "Object code" means any non-source
 form of a work.
  A "Standard Interface" means an interface that either is an official
 standard defined by a recognized standards body, or, in the case of
 interfaces specified for a particular programming language, one that
 is widely used among developers working in that language.
  The "System Libraries" of an executable work include anything, other
 than the work as a whole, that (a) is included in the normal form of
 packaging a Major Component, but which is not part of that Major
 Component, and (b) serves only to enable use of the work with that
 Major Component, or to implement a Standard Interface for which an
 implementation is available to the public in source code form.  A
 "Major Component", in this context, means a major essential component
 (kernel, window system, and so on) of the specific operating system
 (if any) on which the executable work runs, or a compiler used to
 produce the work, or an object code interpreter used to run it.
  The "Corresponding Source" for a work in object code form means all
 the source code needed to generate, install, and (for an executable
 work) run the object code and to modify the work, including scripts to
 control those activities.  However, it does not include the work's
 System Libraries, or general-purpose tools or generally available free
 programs which are used unmodified in performing those activities but
 which are not part of the work.  For example, Corresponding Source
 includes interface definition files associated with source files for
 the work, and the source code for shared libraries and dynamically
 linked subprograms that the work is specifically designed to require,
 such as by intimate data communication or control flow between those
 subprograms and other parts of the work.
  The Corresponding Source need not include anything that users
 can regenerate automatically from other parts of the Corresponding
 Source.
  The Corresponding Source for a work in source code form is that
 same work.
  2. Basic Permissions.
  All rights granted under this License are granted for the term of
 copyright on the Program, and are irrevocable provided the stated
 conditions are met.  This License explicitly affirms your unlimited
 permission to run the unmodified Program.  The output from running a
 covered work is covered by this License only if the output, given its
 content, constitutes a covered work.  This License acknowledges your
 rights of fair use or other equivalent, as provided by copyright law.
  You may make, run and propagate covered works that you do not
 convey, without conditions so long as your license otherwise remains
 in force.  You may convey covered works to others for the sole purpose
 of having them make modifications exclusively for you, or provide you
 with facilities for running those works, provided that you comply with
 the terms of this License in conveying all material for which you do
 not control copyright.  Those thus making or running the covered works
 for you must do so exclusively on your behalf, under your direction
 and control, on terms that prohibit them from making any copies of
 your copyrighted material outside their relationship with you.
  Conveying under any other circumstances is permitted solely under
 the conditions stated below.  Sublicensing is not allowed; section 10
 makes it unnecessary.
  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
  No covered work shall be deemed part of an effective technological
 measure under any applicable law fulfilling obligations under article
 11 of the WIPO copyright treaty adopted on 20 December 1996, or
 similar laws prohibiting or restricting circumvention of such
 measures.
  When you convey a covered work, you waive any legal power to forbid
 circumvention of technological measures to the extent such circumvention
 is effected by exercising rights under this License with respect to
 the covered work, and you disclaim any intention to limit operation or
 modification of the work as a means of enforcing, against the work's
 users, your or third parties' legal rights to forbid circumvention of
 technological measures.
  4. Conveying Verbatim Copies.
  You may convey verbatim copies of the Program's source code as you
 receive it, in any medium, provided that you conspicuously and
 appropriately publish on each copy an appropriate copyright notice;
 keep intact all notices stating that this License and any
 non-permissive terms added in accord with section 7 apply to the code;
 keep intact all notices of the absence of any warranty; and give all
 recipients a copy of this License along with the Program.
  You may charge any price or no price for each copy that you convey,
 and you may offer support or warranty protection for a fee.
  5. Conveying Modified Source Versions.
  You may convey a work based on the Program, or the modifications to
 produce it from the Program, in the form of source code under the
 terms of section 4, provided that you also meet all of these conditions:
    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.
    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".
    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.
    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.
  A compilation of a covered work with other separate and independent
 works, which are not by their nature extensions of the covered work,
 and which are not combined with it such as to form a larger program,
 in or on a volume of a storage or distribution medium, is called an
 "aggregate" if the compilation and its resulting copyright are not
 used to limit the access or legal rights of the compilation's users
 beyond what the individual works permit.  Inclusion of a covered work
 in an aggregate does not cause this License to apply to the other
 parts of the aggregate.
  6. Conveying Non-Source Forms.
  You may convey a covered work in object code form under the terms
 of sections 4 and 5, provided that you also convey the
 machine-readable Corresponding Source under the terms of this License,
 in one of these ways:
    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.
    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.
    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.
    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.
    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.
  A separable portion of the object code, whose source code is excluded
 from the Corresponding Source as a System Library, need not be
 included in conveying the object code work.
  A "User Product" is either (1) a "consumer product", which means any
 tangible personal property which is normally used for personal, family,
 or household purposes, or (2) anything designed or sold for incorporation
 into a dwelling.  In determining whether a product is a consumer product,
 doubtful cases shall be resolved in favor of coverage.  For a particular
 product received by a particular user, "normally used" refers to a
 typical or common use of that class of product, regardless of the status
 of the particular user or of the way in which the particular user
 actually uses, or expects or is expected to use, the product.  A product
 is a consumer product regardless of whether the product has substantial
 commercial, industrial or non-consumer uses, unless such uses represent
 the only significant mode of use of the product.
  "Installation Information" for a User Product means any methods,
 procedures, authorization keys, or other information required to install
 and execute modified versions of a covered work in that User Product from
 a modified version of its Corresponding Source.  The information must
 suffice to ensure that the continued functioning of the modified object
 code is in no case prevented or interfered with solely because
 modification has been made.
  If you convey an object code work under this section in, or with, or
 specifically for use in, a User Product, and the conveying occurs as
 part of a transaction in which the right of possession and use of the
 User Product is transferred to the recipient in perpetuity or for a
 fixed term (regardless of how the transaction is characterized), the
 Corresponding Source conveyed under this section must be accompanied
 by the Installation Information.  But this requirement does not apply
 if neither you nor any third party retains the ability to install
 modified object code on the User Product (for example, the work has
 been installed in ROM).
  The requirement to provide Installation Information does not include a
 requirement to continue to provide support service, warranty, or updates
 for a work that has been modified or installed by the recipient, or for
 the User Product in which it has been modified or installed.  Access to a
 network may be denied when the modification itself materially and
 adversely affects the operation of the network or violates the rules and
 protocols for communication across the network.
  Corresponding Source conveyed, and Installation Information provided,
 in accord with this section must be in a format that is publicly
 documented (and with an implementation available to the public in
 source code form), and must require no special password or key for
 unpacking, reading or copying.
  7. Additional Terms.
  "Additional permissions" are terms that supplement the terms of this
 License by making exceptions from one or more of its conditions.
 Additional permissions that are applicable to the entire Program shall
 be treated as though they were included in this License, to the extent
 that they are valid under applicable law.  If additional permissions
 apply only to part of the Program, that part may be used separately
 under those permissions, but the entire Program remains governed by
 this License without regard to the additional permissions.
  When you convey a copy of a covered work, you may at your option
 remove any additional permissions from that copy, or from any part of
 it.  (Additional permissions may be written to require their own
 removal in certain cases when you modify the work.)  You may place
 additional permissions on material, added by you to a covered work,
 for which you have or can give appropriate copyright permission.
  Notwithstanding any other provision of this License, for material you
 add to a covered work, you may (if authorized by the copyright holders of
 that material) supplement the terms of this License with terms:
    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or
    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or
    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or
    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or
    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or
    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.
  All other non-permissive additional terms are considered "further
 restrictions" within the meaning of section 10.  If the Program as you
 received it, or any part of it, contains a notice stating that it is
 governed by this License along with a term that is a further
 restriction, you may remove that term.  If a license document contains
 a further restriction but permits relicensing or conveying under this
 License, you may add to a covered work material governed by the terms
 of that license document, provided that the further restriction does
 not survive such relicensing or conveying.
  If you add terms to a covered work in accord with this section, you
 must place, in the relevant source files, a statement of the
 additional terms that apply to those files, or a notice indicating
 where to find the applicable terms.
  Additional terms, permissive or non-permissive, may be stated in the
 form of a separately written license, or stated as exceptions;
 the above requirements apply either way.
  8. Termination.
  You may not propagate or modify a covered work except as expressly
 provided under this License.  Any attempt otherwise to propagate or
 modify it is void, and will automatically terminate your rights under
 this License (including any patent licenses granted under the third
 paragraph of section 11).
  However, if you cease all violation of this License, then your
 license from a particular copyright holder is reinstated (a)
 provisionally, unless and until the copyright holder explicitly and
 finally terminates your license, and (b) permanently, if the copyright
 holder fails to notify you of the violation by some reasonable means
 prior to 60 days after the cessation.
  Moreover, your license from a particular copyright holder is
 reinstated permanently if the copyright holder notifies you of the
 violation by some reasonable means, this is the first time you have
 received notice of violation of this License (for any work) from that
 copyright holder, and you cure the violation prior to 30 days after
 your receipt of the notice.
  Termination of your rights under this section does not terminate the
 licenses of parties who have received copies or rights from you under
 this License.  If your rights have been terminated and not permanently
 reinstated, you do not qualify to receive new licenses for the same
 material under section 10.
  9. Acceptance Not Required for Having Copies.
  You are not required to accept this License in order to receive or
 run a copy of the Program.  Ancillary propagation of a covered work
 occurring solely as a consequence of using peer-to-peer transmission
 to receive a copy likewise does not require acceptance.  However,
 nothing other than this License grants you permission to propagate or
 modify any covered work.  These actions infringe copyright if you do
 not accept this License.  Therefore, by modifying or propagating a
 covered work, you indicate your acceptance of this License to do so.
  10. Automatic Licensing of Downstream Recipients.
  Each time you convey a covered work, the recipient automatically
 receives a license from the original licensors, to run, modify and
 propagate that work, subject to this License.  You are not responsible
 for enforcing compliance by third parties with this License.
  An "entity transaction" is a transaction transferring control of an
 organization, or substantially all assets of one, or subdividing an
 organization, or merging organizations.  If propagation of a covered
 work results from an entity transaction, each party to that
 transaction who receives a copy of the work also receives whatever
 licenses to the work the party's predecessor in interest had or could
 give under the previous paragraph, plus a right to possession of the
 Corresponding Source of the work from the predecessor in interest, if
 the predecessor has it or can get it with reasonable efforts.
  You may not impose any further restrictions on the exercise of the
 rights granted or affirmed under this License.  For example, you may
 not impose a license fee, royalty, or other charge for exercise of
 rights granted under this License, and you may not initiate litigation
 (including a cross-claim or counterclaim in a lawsuit) alleging that
 any patent claim is infringed by making, using, selling, offering for
 sale, or importing the Program or any portion of it.
  11. Patents.
  A "contributor" is a copyright holder who authorizes use under this
 License of the Program or a work on which the Program is based.  The
 work thus licensed is called the contributor's "contributor version".
  A contributor's "essential patent claims" are all patent claims
 owned or controlled by the contributor, whether already acquired or
 hereafter acquired, that would be infringed by some manner, permitted
 by this License, of making, using, or selling its contributor version,
 but do not include claims that would be infringed only as a
 consequence of further modification of the contributor version.  For
 purposes of this definition, "control" includes the right to grant
 patent sublicenses in a manner consistent with the requirements of
 this License.
  Each contributor grants you a non-exclusive, worldwide, royalty-free
 patent license under the contributor's essential patent claims, to
 make, use, sell, offer for sale, import and otherwise run, modify and
 propagate the contents of its contributor version.
  In the following three paragraphs, a "patent license" is any express
 agreement or commitment, however denominated, not to enforce a patent
 (such as an express permission to practice a patent or covenant not to
 sue for patent infringement).  To "grant" such a patent license to a
 party means to make such an agreement or commitment not to enforce a
 patent against the party.
  If you convey a covered work, knowingly relying on a patent license,
 and the Corresponding Source of the work is not available for anyone
 to copy, free of charge and under the terms of this License, through a
 publicly available network server or other readily accessible means,
 then you must either (1) cause the Corresponding Source to be so
 available, or (2) arrange to deprive yourself of the benefit of the
 patent license for this particular work, or (3) arrange, in a manner
 consistent with the requirements of this License, to extend the patent
 license to downstream recipients.  "Knowingly relying" means you have
 actual knowledge that, but for the patent license, your conveying the
 covered work in a country, or your recipient's use of the covered work
 in a country, would infringe one or more identifiable patents in that
 country that you have reason to believe are valid.
  If, pursuant to or in connection with a single transaction or
 arrangement, you convey, or propagate by procuring conveyance of, a
 covered work, and grant a patent license to some of the parties
 receiving the covered work authorizing them to use, propagate, modify
 or convey a specific copy of the covered work, then the patent license
 you grant is automatically extended to all recipients of the covered
 work and works based on it.
  A patent license is "discriminatory" if it does not include within
 the scope of its coverage, prohibits the exercise of, or is
 conditioned on the non-exercise of one or more of the rights that are
 specifically granted under this License.  You may not convey a covered
 work if you are a party to an arrangement with a third party that is
 in the business of distributing software, under which you make payment
 to the third party based on the extent of your activity of conveying
 the work, and under which the third party grants, to any of the
 parties who would receive the covered work from you, a discriminatory
 patent license (a) in connection with copies of the covered work
 conveyed by you (or copies made from those copies), or (b) primarily
 for and in connection with specific products or compilations that
 contain the covered work, unless you entered into that arrangement,
 or that patent license was granted, prior to 28 March 2007.
  Nothing in this License shall be construed as excluding or limiting
 any implied license or other defenses to infringement that may
 otherwise be available to you under applicable patent law.
  12. No Surrender of Others' Freedom.
  If conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
 excuse you from the conditions of this License.  If you cannot convey a
 covered work so as to satisfy simultaneously your obligations under this
 License and any other pertinent obligations, then as a consequence you may
 not convey it at all.  For example, if you agree to terms that obligate you
 to collect a royalty for further conveying from those to whom you convey
 the Program, the only way you could satisfy both those terms and this
 License would be to refrain entirely from conveying the Program.
  13. Use with the GNU Affero General Public License.
  Notwithstanding any other provision of this License, you have
 permission to link or combine any covered work with a work licensed
 under version 3 of the GNU Affero General Public License into a single
 combined work, and to convey the resulting work.  The terms of this
 License will continue to apply to the part which is the covered work,
 but the special requirements of the GNU Affero General Public License,
 section 13, concerning interaction through a network will apply to the
 combination as such.
  14. Revised Versions of this License.
  The Free Software Foundation may publish revised and/or new versions of
 the GNU General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
  Each version is given a distinguishing version number.  If the
 Program specifies that a certain numbered version of the GNU General
 Public License "or any later version" applies to it, you have the
 option of following the terms and conditions either of that numbered
 version or of any later version published by the Free Software
 Foundation.  If the Program does not specify a version number of the
 GNU General Public License, you may choose any version ever published
 by the Free Software Foundation.
  If the Program specifies that a proxy can decide which future
 versions of the GNU General Public License can be used, that proxy's
 public statement of acceptance of a version permanently authorizes you
 to choose that version for the Program.
  Later license versions may give you additional or different
 permissions.  However, no additional obligations are imposed on any
 author or copyright holder as a result of your choosing to follow a
 later version.
  15. Disclaimer of Warranty.
  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
 APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
 HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
 OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
 THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
 IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
 ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
  16. Limitation of Liability.
  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
 WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
 THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
 GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
 USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
 DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
 PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
 EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
 SUCH DAMAGES.
  17. Interpretation of Sections 15 and 16.
  If the disclaimer of warranty and limitation of liability provided
 above cannot be given local legal effect according to their terms,
 reviewing courts shall apply local law that most closely approximates
 an absolute waiver of all civil liability in connection with the
 Program, unless a warranty or assumption of liability accompanies a
 copy of the Program in return for a fee.
                     END OF TERMS AND CONDITIONS
            How to Apply These Terms to Your New Programs
  If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
 free software which everyone can redistribute and change under these terms.
  To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
 state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
    {one line to give the program's name and a brief idea of what it does.}
    Copyright (C) {year}  {name of author}
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 Also add information on how to contact you by electronic and paper mail.
  If the program does terminal interaction, make it output a short
 notice like this when it starts in an interactive mode:
    {project}  Copyright (C) {year}  {fullname}
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.
 The hypothetical commands `show w' and `show c' should show the appropriate
 parts of the General Public License.  Of course, your program's commands
 might be different; for a GUI interface, you would use an "about box".
  You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
 <http://www.gnu.org/licenses/>.
  The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
 <http://www.gnu.org/philosophy/why-not-lgpl.html>.
--- a/15
+++ b/15
@ -1,15 +0,0 @@
 .PHONY: build run test build-test
 IMAGE_NAME=php
 build:
 	docker build --tag=$(IMAGE_NAME) .
 run: build
 	docker run -d -p 8080:8080 $(IMAGE_NAME)
 build-test:
 	docker build --tag=$(IMAGE_NAME)-candidate .
 test: build-test
 	./test/run
--- a/README.md
+++ b/README.md
@ -1,253 +0,0 @@
 PHP Source to image builder
 ============================
 This repository contains the source for building various versions of
 the PHP application as a reproducible Docker image using
 [source-to-image](https://github.com/openshift/source-to-image).
 This image is port to **fedora** of Software collections [php7.0 s2i](https://github.com/sclorg/s2i-php-container/tree/master/7.0).
 The resulting image can be run using [Docker](http://docker.io).
 Build
 ------------------------
 Most simple way to build image is using **Makefile**.
 ```
 $ make build
 ```
 This build php image and tag it with name and version specified in **Makefile**:
 ```
 IMAGE_NAME=php
 VERSION=7
 ```
 Usage
 ------------------------
 Build your PHP application
 ```
 s2i build <SOURCE-REPOSITORY> php <NAME-OF-APP>
 ```
 Substitute <SOURCE-REPOSITORY> with path to your application or link to GitHub repository.
 For example:
 ```
 s2i build https://github.com/fermayo/hello-world-php php hello-world
 ```
 Then run application in docker container:
 ```
 docker run -p 8080:8080 <NAME-OF-APP>
 ```
 So for our example it would be:
 ```
 docker run -p 8080:8080 hello-world
 ```
 **Accessing the application:**
 ```
 curl 127.0.0.1:8080
 ```
 Repository organization
 ------------------------
 * **php**
    * **Dockerfile**
        Fedora based Dockerfile.
    * **Makefile**
        Used to build and run docker image.
    * **openshift-template.yaml**
        Template to build and run PHP applications easily in OpenShift.
    * **`.s2i/bin/`**
        This folder contains scripts that are run by [S2I](https://github.com/openshift/source-to-image):
        *   **assemble**
            Used to install the sources into the location where the application
            will be run and prepare the application for deployment (eg. installing
            modules using npm, etc..)
        *   **run**
            This script is responsible for running the application, by using the
            application web server.
        *   **usage**
            This script is called when someone try to run image using docker.  
    * **`bin/`**
        Helper scripts for fixing permissions and reading limits from cgroup system.
    * **`contrib/`**
        This folder contains a file with commonly used modules.
    * **`root/`**
        Manual pages.
    * **`test/`**
        This folder contains the [S2I](https://github.com/openshift/source-to-image)
        test framework with a sample PHP app.
        * **`test-app/`**
            A simple PHP app used for testing purposes by the [S2I](https://github.com/openshift/source-to-image) test framework.
        * **run**
            Script that runs the [S2I](https://github.com/openshift/source-to-image) test framework.
 Environment variables
 ---------------------
 To set these environment variables, you can place them as a key value pair into a `.sti/environment`
 file inside your source code repository.
 The following environment variables set their equivalent property value in the php.ini file:
 * **ERROR_REPORTING**
  * Informs PHP of which errors, warnings and notices you would like it to take action for
  * Default: E_ALL & ~E_NOTICE
 * **DISPLAY_ERRORS**
  * Controls whether or not and where PHP will output errors, notices and warnings
  * Default: ON
 * **DISPLAY_STARTUP_ERRORS**
  * Cause display errors which occur during PHP's startup sequence to be handled separately from display errors
  * Default: OFF
 * **TRACK_ERRORS**
  * Store the last error/warning message in $php_errormsg (boolean)
  * Default: OFF
 * **HTML_ERRORS**
  * Link errors to documentation related to the error
  * Default: ON
 * **INCLUDE_PATH**
  * Path for PHP source files
  * Default: .:/opt/app-root/src:/usr/share/pear
 * **SESSION_PATH**
  * Location for session data files
  * Default: /tmp/sessions
 * **SHORT_OPEN_TAG**
  * Determines whether or not PHP will recognize code between <? and ?> tags
  * Default: OFF
 * **DOCUMENTROOT**
  * Path that defines the DocumentRoot for your application (ie. /public)
  * Default: /
 The following environment variables set their equivalent property value in the opcache.ini file:
 * **OPCACHE_MEMORY_CONSUMPTION**
  * The OPcache shared memory storage size in megabytes
  * Default: 128
 * **OPCACHE_REVALIDATE_FREQ**
  * How often to check script timestamps for updates, in seconds. 0 will result in OPcache checking for updates on every request.
  * Default: 2
 You can also override the entire directory used to load the PHP configuration by setting:
 * **PHPRC**
  * Sets the path to the php.ini file
 * **PHP_INI_SCAN_DIR**
  * Path to scan for additional ini configuration files
 You can override the Apache [MPM prefork](https://httpd.apache.org/docs/2.4/mod/mpm_common.html)
 settings to increase the performance for of the PHP application. In case you set
 the Cgroup limits in Docker, the image will attempt to automatically set the
 optimal values. You can override this at any time by specifying the values
 yourself:
 * **HTTPD_START_SERVERS**
  * The [StartServers](https://httpd.apache.org/docs/2.4/mod/mpm_common.html#startservers)
    directive sets the number of child server processes created on startup.
  * Default: 8
 * **HTTPD_MAX_REQUEST_WORKERS**
  * The [MaxRequestWorkers](https://httpd.apache.org/docs/2.4/mod/mpm_common.html#maxrequestworkers)
    directive sets the limit on the number of simultaneous requests that will be served.
  * `MaxRequestWorkers` was called `MaxClients` before version httpd 2.3.13.
  * Default: 256 (this is automatically tuned by setting Cgroup limits for the container using this formula:
    `TOTAL_MEMORY / 15MB`. The 15MB is average size of a single httpd process.
  You can use a custom composer repository mirror URL to download packages instead of the default 'packagist.org':
    * **COMPOSER_MIRROR**
      * Adds a custom composer repository mirror URL to composer configuration. Note: This only affects packages listed in composer.json.
 Source repository layout
 ------------------------
 You do not need to change anything in your existing PHP project's repository.
 However, if these files exist they will affect the behavior of the build process:
 * **composer.json**
  List of dependencies to be installed with `composer`. The format is documented
  [here](https://getcomposer.org/doc/04-schema.md).
 * **.htaccess**
  In case the **DocumentRoot** of the application is nested within the source directory `/opt/app-root/src`,
  users can provide their own Apache **.htaccess** file.  This allows the overriding of Apache's behavior and
  specifies how application requests should be handled. The **.htaccess** file needs to be located at the root
  of the application source.
 Hot deploy
 ---------------------
 In order to immediately pick up changes made in your application source code, you need to run your built image with the `OPCACHE_REVALIDATE_FREQ=0` environment variable passed to the [Docker](http://docker.io) `-e` run flag:
 ```
 $ docker run -e OPCACHE_REVALIDATE_FREQ=0 -p 8080:8080 php-app
 ```
 To change your source code in running container, use Docker's [exec](http://docker.io) command:
 ```
 docker exec -it <CONTAINER_ID> /bin/bash
 ```
 After you [Docker exec](http://docker.io) into the running container, your current directory is set
 to `/opt/app-root/src`, where the source code is located.
 Test
 ---------------------
 Run:
 ```
 $ make test
 ```
 This will build candidate image and check the basic functionality of s2i image.
 Running in OpenShift
 ---------------------
 Login
 ```
 $ oc login -u developer
 ```
 Create new project
 ```
 $ oc new-project sample-project
 ```
 Create template from YAML file
 ```
 $ oc create -f openshift-template.yaml
 ```
 Create new application (php-fedora is template created in previous step)
 ```
 $ oc new-app php-fedora -p APP_NAME=<name> -p SOURCE_REPOSITORY=<your-github-repository>
 ```
 For example:
 ```
 $ oc new-app php-fedora -p APP_NAME=my-app -p SOURCE_REPOSITORY=https://github.com/fermayo/hello-world-php
 ```
 Check if everything is ok
 ```
 $ oc logs -f bc/my-app
--- a/bin/cgroup-limits
+++ b/bin/cgroup-limits
@ -1,92 +0,0 @@
 #!/usr/bin/python
 """
 Script for parsing cgroup information
 This script will read some limits from the cgroup system and parse
 them, printing out "VARIABLE=VALUE" on each line for every limit that is
 successfully read. Output of this script can be directly fed into
 bash's export command. Recommended usage from a bash script:
    set -o errexit
    export_vars=$(cgroup-limits) ; export $export_vars
 Variables currently supported:
    MAX_MEMORY_LIMIT_IN_BYTES
        Maximum possible limit MEMORY_LIMIT_IN_BYTES can have. This is
        currently constant value of 9223372036854775807.
    MEMORY_LIMIT_IN_BYTES
        Maximum amount of user memory in bytes. If this value is set
        to the same value as MAX_MEMORY_LIMIT_IN_BYTES, it means that
        there is no limit set. The value is taken from
        /sys/fs/cgroup/memory/memory.limit_in_bytes
    NUMBER_OF_CORES
        Number of detected CPU cores that can be used. This value is
        calculated from /sys/fs/cgroup/cpuset/cpuset.cpus
    NO_MEMORY_LIMIT
        Set to "true" if MEMORY_LIMIT_IN_BYTES is so high that the caller
        can act as if no memory limit was set. Undefined otherwise.
 """
 from __future__ import print_function
 import sys
 def _read_file(path):
    try:
        with open(path, 'r') as f:
            return f.read().strip()
    except IOError:
        return None
 def get_memory_limit():
    """
    Read memory limit, in bytes.
    """
    limit = _read_file('/sys/fs/cgroup/memory/memory.limit_in_bytes')
    if limit is None or not limit.isdigit():
        print("Warning: Can't detect memory limit from cgroups",
              file=sys.stderr)
        return None
    return int(limit)
 def get_number_of_cores():
    """
    Read number of CPU cores.
    """
    core_count = 0
    line = _read_file('/sys/fs/cgroup/cpuset/cpuset.cpus')
    if line is None:
        print("Warning: Can't detect number of CPU cores from cgroups",
              file=sys.stderr)
        return None
    for group in line.split(','):
        core_ids = list(map(int, group.split('-')))
        if len(core_ids) == 2:
            core_count += core_ids[1] - core_ids[0] + 1
        else:
            core_count += 1
    return core_count
 if __name__ == "__main__":
    env_vars = {
        "MAX_MEMORY_LIMIT_IN_BYTES": 9223372036854775807,
        "MEMORY_LIMIT_IN_BYTES": get_memory_limit(),
        "NUMBER_OF_CORES": get_number_of_cores()
    }
    env_vars = {k: v for k, v in env_vars.items() if v is not None}
    if env_vars.get("MEMORY_LIMIT_IN_BYTES", 0) >= 92233720368547:
        env_vars["NO_MEMORY_LIMIT"] = "true"
    for key, value in env_vars.items():
        print("{0}={1}".format(key, value))
--- a/bin/fix-permissions
+++ b/bin/fix-permissions
@ -1,6 +0,0 @@
 #!/bin/sh
 # Fix permissions on the given directory to allow group read/write of 
 # regular files and execute of directories.
 find $1 -exec chgrp 0 {} \;
 find $1 -exec chmod g+rw {} \;
 find $1 -type d -exec chmod g+x {} +
--- a/contrib/etc/conf.d/00-documentroot.conf.template
+++ b/contrib/etc/conf.d/00-documentroot.conf.template
@ -1 +0,0 @@
 DocumentRoot "/opt/app-root/src${DOCUMENTROOT}"
--- a/contrib/etc/conf.d/50-mpm-tuning.conf.template
+++ b/contrib/etc/conf.d/50-mpm-tuning.conf.template
@ -1,12 +0,0 @@
 <IfModule mpm_prefork_module>
    # This value should mirror what is set in MinSpareServers.
    StartServers          ${HTTPD_START_SERVERS}
    MinSpareServers       ${HTTPD_START_SERVERS}
    MaxSpareServers       ${HTTPD_MAX_SPARE_SERVERS}
    # The MaxRequestWorkers directive sets the limit on the number of simultaneous requests that will be served. 
    # The default value, when no Cgroup limits are set is 256.
    MaxRequestWorkers     ${HTTPD_MAX_REQUEST_WORKERS}
    ServerLimit           ${HTTPD_MAX_REQUEST_WORKERS}
    MaxRequestsPerChild   4000
    MaxKeepAliveRequests  100
 </IfModule>
--- a/contrib/etc/httpdconf.sed
+++ b/contrib/etc/httpdconf.sed
@ -1,9 +0,0 @@
 s/^Listen 80/Listen 0.0.0.0:8080/
 s/^User apache/User default/
 s/^Group apache/Group root/
 s%^DocumentRoot "/var/www/html"%#DocumentRoot "/opt/app-root/src"%
 s%^<Directory "/var/www/html"%<Directory "/opt/app-root/src"%
 s%^<Directory "/var/html"%<Directory "/opt/app-root/src"%
 s%^ErrorLog "logs/error_log"%ErrorLog "|/usr/bin/cat"%
 s%CustomLog "logs/access_log"%CustomLog "|/usr/bin/cat"%
 151s%AllowOverride None%AllowOverride All%
--- a/contrib/etc/php.d/10-opcache.ini.template
+++ b/contrib/etc/php.d/10-opcache.ini.template
@ -1,113 +0,0 @@
 ; Enable Zend OPcache extension module
 zend_extension=opcache.so
 ; Determines if Zend OPCache is enabled
 opcache.enable=1
 ; Determines if Zend OPCache is enabled for the CLI version of PHP
 ;opcache.enable_cli=0
 ; The OPcache shared memory storage size.
 opcache.memory_consumption=${OPCACHE_MEMORY_CONSUMPTION}
 ; The amount of memory for interned strings in Mbytes.
 opcache.interned_strings_buffer=8
 ; The maximum number of keys (scripts) in the OPcache hash table.
 ; Only numbers between 200 and 100000 are allowed.
 opcache.max_accelerated_files=4000
 ; The maximum percentage of "wasted" memory until a restart is scheduled.
 ;opcache.max_wasted_percentage=5
 ; When this directive is enabled, the OPcache appends the current working
 ; directory to the script key, thus eliminating possible collisions between
 ; files with the same name (basename). Disabling the directive improves
 ; performance, but may break existing applications.
 ;opcache.use_cwd=1
 ; When disabled, you must reset the OPcache manually or restart the
 ; webserver for changes to the filesystem to take effect.
 ;opcache.validate_timestamps=1
 ; How often (in seconds) to check file timestamps for changes to the shared
 ; memory storage allocation. ("1" means validate once per second, but only
 ; once per request. "0" means always validate)
 opcache.revalidate_freq=${OPCACHE_REVALIDATE_FREQ}
 ; Enables or disables file search in include_path optimization
 ;opcache.revalidate_path=0
 ; If disabled, all PHPDoc comments are dropped from the code to reduce the
 ; size of the optimized code.
 ;opcache.save_comments=1
 ; If enabled, a fast shutdown sequence is used for the accelerated code
 ;opcache.fast_shutdown=0
 ; Allow file existence override (file_exists, etc.) performance feature.
 ;opcache.enable_file_override=0
 ; A bitmask, where each bit enables or disables the appropriate OPcache
 ; passes
 ;opcache.optimization_level=0xffffffff
 ;opcache.inherited_hack=1
 ;opcache.dups_fix=0
 ; The location of the OPcache blacklist file (wildcards allowed).
 ; Each OPcache blacklist file is a text file that holds the names of files
 ; that should not be accelerated.
 opcache.blacklist_filename=/etc/opt/rh/rh-php70/php.d/opcache*.blacklist
 ; Allows exclusion of large files from being cached. By default all files
 ; are cached.
 opcache.max_file_size=1M
 ; Check the cache checksum each N requests.
 ; The default value of "0" means that the checks are disabled.
 ;opcache.consistency_checks=0
 ; How long to wait (in seconds) for a scheduled restart to begin if the cache
 ; is not being accessed.
 ;opcache.force_restart_timeout=180
 ; OPcache error_log file name. Empty string assumes "stderr".
 ;opcache.error_log=
 ; All OPcache errors go to the Web server log.
 ; By default, only fatal errors (level 0) or errors (level 1) are logged.
 ; You can also enable warnings (level 2), info messages (level 3) or
 ; debug messages (level 4).
 ;opcache.log_verbosity_level=1
 ; Preferred Shared Memory back-end. Leave empty and let the system decide.
 ;opcache.preferred_memory_model=
 ; Protect the shared memory from unexpected writing during script execution.
 ; Useful for internal debugging only.
 ;opcache.protect_memory=0
 ; Allows calling OPcache API functions only from PHP scripts which path is
 ; started from specified string. The default "" means no restriction
 ;opcache.restrict_api=
 ; Enables and sets the second level cache directory.
 ; It should improve performance when SHM memory is full, at server restart or
 ; SHM reset. The default "" disables file based caching.
 ; RPM note : file cache directory must be owned by process owner
 ;   for mod_php, see /etc/httpd/conf.d/php.conf
 ;   for php-fpm, see /etc/php-fpm.d/*conf
 ;opcache.file_cache=
 ; Enables or disables opcode caching in shared memory.
 ;opcache.file_cache_only=0
 ; Enables or disables checksum validation when script loaded from file cache.
 ;opcache.file_cache_consistency_checks=1
 ; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
 ; This should improve performance, but requires appropriate OS configuration.
 ;opcache.huge_code_pages=0
--- a/contrib/etc/php.ini.template
+++ b/contrib/etc/php.ini.template
--- a/dead.package
+++ b/dead.package
@ -0,0 +1 @@
 Container not being built in Fedora infrastructure for years, check gitlab.com/sclorg instead
--- a/openshift-template.yaml
+++ b/openshift-template.yaml
@ -1,141 +0,0 @@
 ---
 kind: Template
 apiVersion: v1
 metadata:
  name: php-fedora
  annotations:
    description: Php source to image builder
    tags: php s2i
    iconClass: icon-php
 labels:
  template: php
  role: php_application_builder
 objects:
  - kind : ImageStream
    apiVersion : v1
    metadata :
        name : ${APP_NAME}
        labels :
          appid : php-${APP_NAME}
  - kind : ImageStream
    apiVersion : v1
    metadata :
      name : ${APP_NAME}-s2i
      labels :
        appid : php-${APP_NAME}
    spec :
      tags :
        - name : latest
          from :
            kind : DockerImage
            name : modularitycontainers/php
  - kind : BuildConfig
    apiVersion : v1
    metadata :
      name : ${APP_NAME}
      labels :
        appid : php-${APP_NAME}
    spec :
      triggers :
        - type : ConfigChange
        - type : ImageChange
        - type : GitHub
          github:
            secret: secret101
      source :
        type : Git
        git :
          uri : ${SOURCE_REPOSITORY}
          contextDir : ${SOURCE_REPOSITORY}
      strategy :
        type : Source
        sourceStrategy :
          from :
            kind : ImageStreamTag
            name : ${APP_NAME}-s2i:latest
      output :
        to :
          kind : ImageStreamTag
          name : ${APP_NAME}:latest
  - kind : DeploymentConfig
    apiVersion : v1
    metadata :
      name: ${APP_NAME}
      labels :
        appid : php-${APP_NAME}
    spec :
      strategy :
        type : Rolling
      triggers :
         - type : ConfigChange
         - type : ImageChange
           imageChangeParams :
             automatic : true
             containerNames :
               - ${APP_NAME}
             from :
               kind : ImageStreamTag
               name : ${APP_NAME}:latest
      replicas : 1
      selector :
        deploymentconfig : ${APP_NAME}
      template :
        metadata :
          labels :
            appid: php-${APP_NAME}
            deploymentconfig : ${APP_NAME}
        spec :
          containers :
            - name : ${APP_NAME}
              image : ${APP_NAME}:latest
              ports :
                - containerPort : 8080
                  protocol : TCP
              livenessProbe:
                tcpSocket:
                  port: 8080
                initialDelaySeconds: 15
                timeoutSeconds: 1
              readinessProbe:
                httpGet:
                  path: /
                  port: 8080
                initialDelaySeconds: 15
                timeoutSeconds: 1
  - kind : Service
    apiVersion : v1
    metadata :
      name : ${APP_NAME}
      labels :
        appid : php-${APP_NAME}
    spec :
      ports :
        - name: 8080-tcp
          protocol : TCP
          port : 8080
          targetPort : 8080
      selector :
        deploymentconfig : ${APP_NAME}
  - kind : Route
    apiVersion : v1
    metadata :
      name : ${APP_NAME}
      labels :
        appid : php-${APP_NAME}
    spec :
      host :
      to :
        kind : Service
        name : ${APP_NAME}
        weight : 100
      port :
        targetPort : 8080-tcp
 parameters :
  - name : APP_NAME
    description : Name of application
    value :
    required : true
  - name : SOURCE_REPOSITORY
    description : Git source repository
    value :
    required : true
--- a/root/help.1
+++ b/root/help.1
@ -1,191 +0,0 @@
 .TH "php" "1" "" "Rado Pitonak \<rpitonak@redhat.com\>" "DATE 07.04.2017"  ""
 .SH NAME
 .PP
 php \- source to image builder of php applications.
 .SH DESCRIPTION
 .PP
 Image for building php application as reproducible Docker image using source to image. Image is based on fedora.
 .SH USAGE
 .PP
 To pull the php container run:
 .PP
 .RS
 .nf
  # docker pull modularitycontainers/php
 .fi
 .RE
 .PP
 To build your php application run:
 .PP
 .RS
 .nf
  # s2i build <SOURCE\-REPOSITORY> modularitycontainers/php <NAME\-OF\-APP>
 .fi
 .RE
 .PP
 To run your application in docker container:
 .PP
 .RS
 .nf
  # docker run \-p 8080:8080 <NAME\-OF\-APP>
 .fi
 .RE
 .SH ENVIROMENT VARIABLES
 .PP
 To set environment variables, you can place them as a key value pair into a \fB\fC.sti/environment\fR
 file inside your source code repository.
 .PP
 The following environment variables set their equivalent property value in the php.ini file:
 .PP
 ERROR\_REPORTING
    Informs PHP of which errors, warnings and notices you would like it to take action for.
    Default: E\_ALL \& \~E\_NOTICE
 .PP
 DISPLAY\_ERRORS
    Controls whether or not and where PHP will output errors, notices and warnings.
    Default: ON
 .PP
 DISPLAY\_STARTUP\_ERRORS
    Cause display errors which occur during PHP's startup sequence to be handled separately from display errors.
    Default: OFF
 .PP
 TRACK\_ERRORS
    Store the last error/warning message in $php\_errormsg (boolean)
    Default: OFF
 .PP
 HTML\_ERRORS
    Link errors to documentation related to the error
    Default: ON
 .PP
 INCLUDE\_PATH
    Path for PHP source files
    Default: .:/opt/app\-root/src:/usr/share/pear
 .PP
 SESSION\_PATH
    Location for session data files
    Default: /tmp/sessions
 .PP
 SHORT\_OPEN\_TAG
    Determines whether or not PHP will recognize code between <? and ?> tags
    Default: OFF
 .PP
 DOCUMENTROOT
    Path that defines the DocumentRoot for your application (ie. /public)
    Default: /
 .PP
 The following environment variables set their equivalent property value in the opcache.ini file:
 .PP
 OPCACHE\_MEMORY\_CONSUMPTION
    The OPcache shared memory storage size in megabytes
    Default: 128
 .PP
 OPCACHE\_REVALIDATE\_FREQ
    How often to check script timestamps for updates, in seconds. 0 will result in OPcache checking for updates on every request.
    Default: 2
 .PP
 You can also override the entire directory used to load the PHP configuration by setting:
 .PP
 PHPRC
    Sets the path to the php.ini file
 .PP
 PHP\_INI\_SCAN\_DIR
    Path to scan for additional ini configuration files
 .PP
 You can override the Apache MPM prefork settings to increase the performance for of the PHP application. In case you set
 the Cgroup limits in Docker, the image will attempt to automatically set the
 optimal values. You can override this at any time by specifying the values
 yourself:
 .PP
 HTTPD\_START\_SERVERS
  The StartServers directive sets the number of child server processes created on startup.
  Default: 8
 .PP
 HTTPD\_MAX\_REQUEST\_WORKERS
  The MaxRequestWorkers directive sets the limit on the number of simultaneous requests that will be served.
  \fB\fCMaxRequestWorkers\fR was called \fB\fCMaxClients\fR before version httpd 2.3.13.
  Default: 256 (this is automatically tuned by setting Cgroup limits for the container using this formula:
    \fB\fCTOTAL\_MEMORY / 15MB\fR. The 15MB is average size of a single httpd process.
 .PP
 You can use a custom composer repository mirror URL to download packages instead of the default 'packagist.org':
 .PP
 COMPOSER\_MIRROR
      Adds a custom composer repository mirror URL to composer configuration. Note: This only affects packages listed in composer.json.
 .SH HOT DEPLOY
 .PP
 In order to immediately pick up changes made in your application source code, you need to run your built image with the \fB\fCOPCACHE\_REVALIDATE\_FREQ=0\fR environment variable passed to the Docker \fB\fC\-e\fR run flag:
 .PP
 .RS
 .nf
    # docker run \-e OPCACHE\_REVALIDATE\_FREQ=0 \-p 8080:8080 php\-app
 .fi
 .RE
 .PP
 To change your source code in running container, use Docker's exec command:
 .PP
 .RS
 .nf
    # docker exec \-it <CONTAINER\_ID> /bin/bash
 .fi
 .RE
 .PP
 After you Docker exec into the running container, your current directory is set to \fB\fC/opt/app\-root/src\fR, where the source code is located.
 .SH SECURITY IMPLICATIONS
 .PP
 \-p 8080:8080
 .PP
 .RS
 .nf
 Opens  container  port  8080  and  maps it to the same port on the Host.
 .fi
 .RE
--- a/root/help.md
+++ b/root/help.md
@ -1,121 +0,0 @@
 % php(1)
 % Rado Pitonak \<rpitonak@redhat.com\>
 % DATE 07.04.2017
 # NAME
 php - source to image builder of php applications.
 # DESCRIPTION
 Image for building php application as reproducible Docker image using source to image. Image is based on fedora.
 ## USAGE
 To pull the php container run:
      # docker pull modularitycontainers/php
 To build your php application run:
      # s2i build <SOURCE-REPOSITORY> modularitycontainers/php <NAME-OF-APP>
 To run your application in docker container:
      # docker run -p 8080:8080 <NAME-OF-APP>
 ## ENVIROMENT VARIABLES
 To set environment variables, you can place them as a key value pair into a `.sti/environment`
 file inside your source code repository.
 The following environment variables set their equivalent property value in the php.ini file:
 ERROR_REPORTING
    Informs PHP of which errors, warnings and notices you would like it to take action for.
    Default: E_ALL & ~E_NOTICE
 DISPLAY_ERRORS
    Controls whether or not and where PHP will output errors, notices and warnings.
    Default: ON
 DISPLAY_STARTUP_ERRORS
    Cause display errors which occur during PHP's startup sequence to be handled separately from display errors.
    Default: OFF
 TRACK_ERRORS
    Store the last error/warning message in $php_errormsg (boolean)
    Default: OFF
 HTML_ERRORS
    Link errors to documentation related to the error
    Default: ON
 INCLUDE_PATH
    Path for PHP source files
    Default: .:/opt/app-root/src:/usr/share/pear
 SESSION_PATH
    Location for session data files
    Default: /tmp/sessions
 SHORT_OPEN_TAG
    Determines whether or not PHP will recognize code between <? and ?> tags
    Default: OFF
 DOCUMENTROOT
    Path that defines the DocumentRoot for your application (ie. /public)
    Default: /
 The following environment variables set their equivalent property value in the opcache.ini file:
 OPCACHE_MEMORY_CONSUMPTION
    The OPcache shared memory storage size in megabytes
    Default: 128
 OPCACHE_REVALIDATE_FREQ
    How often to check script timestamps for updates, in seconds. 0 will result in OPcache checking for updates on every request.
    Default: 2
 You can also override the entire directory used to load the PHP configuration by setting:   
 PHPRC
    Sets the path to the php.ini file
 PHP_INI_SCAN_DIR
    Path to scan for additional ini configuration files
 You can override the Apache MPM prefork settings to increase the performance for of the PHP application. In case you set
 the Cgroup limits in Docker, the image will attempt to automatically set the
 optimal values. You can override this at any time by specifying the values
 yourself:
 HTTPD_START_SERVERS
  The StartServers directive sets the number of child server processes created on startup.
  Default: 8
 HTTPD_MAX_REQUEST_WORKERS
  The MaxRequestWorkers directive sets the limit on the number of simultaneous requests that will be served.
  `MaxRequestWorkers` was called `MaxClients` before version httpd 2.3.13.
  Default: 256 (this is automatically tuned by setting Cgroup limits for the container using this formula:
    `TOTAL_MEMORY / 15MB`. The 15MB is average size of a single httpd process.
 You can use a custom composer repository mirror URL to download packages instead of the default 'packagist.org':
 COMPOSER_MIRROR
      Adds a custom composer repository mirror URL to composer configuration. Note: This only affects packages listed in composer.json.
 ## HOT DEPLOY
 In order to immediately pick up changes made in your application source code, you need to run your built image with the `OPCACHE_REVALIDATE_FREQ=0` environment variable passed to the Docker `-e` run flag:
        # docker run -e OPCACHE_REVALIDATE_FREQ=0 -p 8080:8080 php-app
 To change your source code in running container, use Docker's exec command:   
        # docker exec -it <CONTAINER_ID> /bin/bash
 After you Docker exec into the running container, your current directory is set to `/opt/app-root/src`, where the source code is located.
 ## SECURITY IMPLICATIONS
 -p 8080:8080
     Opens  container  port  8080  and  maps it to the same port on the Host.       
--- a/test/.gitignore
+++ b/test/.gitignore
@ -1 +0,0 @@
 .git/
--- a/test/run
+++ b/test/run
@ -1,193 +0,0 @@
 #!/bin/bash
 #
 # The 'run' performs a simple test that verifies the S2I image.
 # The main focus here is to exercise the S2I scripts.
 #
 # For more information see the documentation:
 # https://github.com/openshift/source-to-image/blob/master/docs/builder_image.md
 #
 # IMAGE_NAME specifies a name of the candidate image used for testing.
 # The image has to be available before this script is executed.
 #
 IMAGE_NAME=${IMAGE_NAME-php-candidate}
 # Determining system utility executables (darwin compatibility check)
 READLINK_EXEC="readlink"
 MKTEMP_EXEC="mktemp"
 if [[ "$OSTYPE" =~ 'darwin' ]]; then
  ! type -a "greadlink" &>"/dev/null" || READLINK_EXEC="greadlink"
  ! type -a "gmktemp" &>"/dev/null" || MKTEMP_EXEC="gmktemp"
 fi
 test_dir="$($READLINK_EXEC -zf $(dirname "${BASH_SOURCE[0]}"))"
 image_dir=$($READLINK_EXEC -zf ${test_dir}/..)
 scripts_url="file://${image_dir}/.s2i/bin"
 cid_file=$($MKTEMP_EXEC -u --suffix=.cid)
 # Since we built the candidate image locally, we don't want S2I to attempt to pull
 # it from Docker hub
 s2i_args="--force-pull=false"
 # Port the image exposes service to be tested
 test_port=8080
 info() {
  echo -e "\n\e[1m[INFO] $@...\e[0m\n"
 }
 image_exists() {
  docker inspect $1 &>/dev/null
 }
 container_exists() {
  image_exists $(cat $cid_file)
 }
 container_ip() {
  if [ ! -z "$DOCKER_HOST" ] && [[ "$OSTYPE" =~ 'darwin' ]]; then
    docker-machine ip
  else
    docker inspect --format="{{ .NetworkSettings.IPAddress }}" $(cat $cid_file)
  fi
 }
 container_port() {
  if [ ! -z "$DOCKER_HOST" ] && [[ "$OSTYPE" =~ 'darwin' ]]; then
    docker inspect --format="{{(index .NetworkSettings.Ports \"$test_port/tcp\" 0).HostPort}}" "$(cat "${cid_file}")"
  else
    echo $test_port
  fi
 }
 run_s2i_build() {
  s2i build --incremental=true ${s2i_args} file://${test_dir}/test-app ${IMAGE_NAME} ${IMAGE_NAME}-testapp
 }
 prepare() {
  if ! image_exists ${IMAGE_NAME}; then
    echo "ERROR: The image ${IMAGE_NAME} must exist before this script is executed."
    exit 1
  fi
  # s2i build requires the application is a valid 'Git' repository
  pushd ${test_dir}/test-app >/dev/null
  git init
  git config user.email "build@localhost" && git config user.name "builder"
  git add -A && git commit -m "Sample commit"
  popd >/dev/null
 }
 run_test_application() {
  docker run --user=100001 --rm --cidfile=${cid_file} -p ${test_port} ${IMAGE_NAME}-testapp
 }
 cleanup_test_app() {
  info "Cleaning up the test application"
  if [ -f $cid_file ]; then
    if container_exists; then
      docker stop $(cat $cid_file)
      docker rm $(cat $cid_file)
    fi
    rm $cid_file
  fi
 }
 cleanup() {
  if [ -f $cid_file ]; then
    if container_exists; then
      docker stop $(cat $cid_file)
    fi
  fi
  if image_exists ${IMAGE_NAME}-testapp; then
    docker rmi -f ${IMAGE_NAME}-testapp
  fi
 }
 check_result() {
  local result="$1"
  if [[ "$result" != "0" ]]; then
    echo "S2I image '${IMAGE_NAME}' test FAILED (exit code: ${result})"
    cleanup
    exit $result
  fi
 }
 wait_for_cid() {
  local max_attempts=10
  local sleep_time=1
  local attempt=1
  local result=1
  while [ $attempt -le $max_attempts ]; do
    [ -f $cid_file ] && break
    echo "Waiting for container to start..."
    attempt=$(( $attempt + 1 ))
    sleep $sleep_time
  done
 }
 test_s2i_usage() {
  echo "Testing 's2i usage'..."
  s2i usage ${s2i_args} ${IMAGE_NAME} &>/dev/null
 }
 test_docker_run_usage() {
  info "Testing 'docker run' usage"
  docker run ${IMAGE_NAME} &>/dev/null
 }
 test_connection() {
  echo "Testing HTTP connection (http://$(container_ip):$(container_port))"
  local max_attempts=10
  local sleep_time=1
  local attempt=1
  local result=1
  while [ $attempt -le $max_attempts ]; do
    echo "Sending GET request to http://$(container_ip):$(container_port)/"
    response_code=$(curl -s -w %{http_code} -o /dev/null http://$(container_ip):$(container_port)/)
    status=$?
    if [ $status -eq 0 ]; then
      if [ $response_code -eq 200 ]; then
        result=0
      fi
      break
    fi
    attempt=$(( $attempt + 1 ))
    sleep $sleep_time
  done
  return $result
 }
 test_application() {
  # Verify that the HTTP connection can be established to test application container
  run_test_application &
  # Wait for the container to write it's CID file
  wait_for_cid
  test_connection
  check_result $?
  cleanup_test_app
 }
 # Build the application image twice to ensure the 'save-artifacts' and
 # 'restore-artifacts' scripts are working properly
 prepare
 run_s2i_build
 check_result $?
 # Verify the 'usage' script is working properly
 test_s2i_usage
 check_result $?
 # Verify the 'usage' script is working properly when running the base image with 'docker run ...'
 test_docker_run_usage
 check_result $?
 # Test application with default uid
 test_application
 # Test application with random uid
 CONTAINER_ARGS="-u 12345" test_application
 cleanup
 info "All tests finished successfully."
--- a/test/test-app
+++ b/test/test-app
@ -1 +0,0 @@
 Subproject commit df325a98b3498cbb0f18009f4640c4d6205934fe
Author	SHA1	Message	Date
Honza Horak	b500fdddb2	Container not being built in Fedora infrastructure for years, check gitlab.com/sclorg instead	2026-01-15 11:28:24 +01:00
Petr "Stone" Hracek	c08abcc5ab	Add upstream -> downstream configuration file Signed-off-by: Petr "Stone" Hracek <phracek@redhat.com>	2021-03-16 10:19:03 +01:00
		`@ -1 +0,0 @@`
			`DocumentRoot "/opt/app-root/src${DOCUMENTROOT}"`
		`@ -0,0 +1 @@`
							`Container not being built in Fedora infrastructure for years, check gitlab.com/sclorg instead`
		`@ -1 +0,0 @@`
			`Subproject commit df325a98b3498cbb0f18009f4640c4d6205934fe`