Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild

Convert license to SPDX

.gitignore

@@ -0,0 +1,9 @@
+3proxy-0.6.1.tgz
+/3proxy-0.7.tgz
+/3proxy-0.7.1.1.tgz
+/3proxy-0.7.1.2.tgz
+/3proxy-0.8.2.tar.gz
+/3proxy-0.8.12.tar.gz
+/3proxy-0.8.13.tar.gz
+/3proxy-0.9.4.tar.gz
+/3proxy-0.9.5.tar.gz

3proxy-0.6.1-config-path.patch

@@ -0,0 +1,20 @@
+--- man/3proxy.8.orig	2009-07-13 17:52:25.000000000 +0400
++++ man/3proxy.8	2010-05-30 21:39:19.000000000 +0400
+@@ -84,7 +84,7 @@
+ configuration from stdin. It makes it possible to use 3proxy.cfg file as
+ executable script just by setting +x mode and adding
+ .br
+-#!/usr/local/3proxy/3proxy
++#!/etc/3proxy
+ .br
+ as a first line in 3proxy.cfg
+ .TP
+@@ -133,7 +133,7 @@
+ wget to automate this task.
+ .SH FILES
+ .TP
+-.I "/usr/local/3proxy/3proxy.cfg (3proxy.cfg)"
++.I "/etc/3proxy.cfg (3proxy.cfg)"
+ .BR 3proxy
+ configuration file
+ .SH BUGS

3proxy-0.9.4-manpage.patch

@@ -0,0 +1,297 @@
+--- man/3proxy.8
++++ man/3proxy.8
+@@ -26,7 +26,7 @@
+ gateways with HTTP and HTTPS proxy with FTP over HTTP support, SOCKS v4,
+ v4.5 and v5, POP3 proxy, UDP and TCP portmappers. Each gateway is started
+ from configuration file like independant service 
+-.BR proxy (8)
++.BR htproxy (8)
+ .BR socks (8)
+ .BR pop3p (8)
+ .BR tcppm (8)
+@@ -140,7 +140,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy.cfg(3), proxy(8), ftppr(8), socks(8), pop3p(8), tcppm(8), udppm(8),
++3proxy.cfg(3), ftppr(8), htproxy(8), socks(8), pop3p(8), tcppm(8), tlspr(8), udppm(8),
+ kill(1), syslogd(8),
+ .br
+ https://3proxy.org/
+--- man/3proxy.cfg.3
++++ man/3proxy.cfg.3
+@@ -46,7 +46,7 @@
+  Next commands start gateway services:
+ 
+ .br
+-.B proxy
++.B htproxy
+ [options]
+ .br
+ .B socks
+@@ -74,7 +74,7 @@
+ .br
+  Descriptions:
+ .br
+-.B proxy
++.B htproxy
+ HTTP/HTTPS proxy (default port 3128)
+ .br
+ .B socks
+@@ -185,7 +185,7 @@
+ of IP-IP NAT (will not work for PAT)
+ .br
+  Also, all options mentioned for 
+-.BR proxy (8)
++.BR htproxy (8)
+ .BR socks (8)
+ .BR pop3p (8)
+ .BR tcppm (8)
+@@ -1078,7 +1078,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), proxy(8), ftppr(8), socks(8), pop3p(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), pop3p(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+  https://3proxy.org/
+ .SH TRIVIA
+--- man/ftppr.8
++++ man/ftppr.8
+@@ -79,7 +79,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), proxy(8), pop3p(8), socks(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), htproxy(8), pop3p(8), socks(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- /dev/null
++++ man/htproxy.8
+@@ -0,0 +1,78 @@
++.TH proxy "8" "January 2019" "3proxy 0.9" "Universal proxy server"
++.SH NAME
++.B htproxy
++\- HTTP proxy gateway service
++.SH SYNOPSIS
++.BR "htproxy " [ -d ][ -a ]
++.IB \fR[ -l \fR[ \fR[ @ \fR] logfile \fR]]
++.IB \fR[ -p port\fR]
++.IB \fR[ -i internal_ip\fR]
++.IB \fR[ -e external_ip\fR]
++.SH DESCRIPTION
++.B htproxy
++is HTTP gateway service with HTTPS and FTP over HTTPS support.
++.SH OPTIONS
++.TP
++.B -I
++Inetd mode. Standalone service only.
++.TP
++.B -d
++Daemonise. Detach service from console and run in the background.
++.TP
++.B -t
++Be silenT. Do not log start/stop/accept error records.
++.TP
++.B -u
++Never ask for username authentication
++.TP
++.B -e
++External address. IP address of interface proxy should initiate connections
++from. 
++By default system will deside which address to use in accordance
++with routing table.
++.TP
++.B -i
++Internal address. IP address proxy accepts connections to.
++By default connection to any interface is accepted. It\'s usually unsafe.
++.TP
++.B -a
++Anonymous. Hide information about client.
++.TP
++.B -a1
++Anonymous. Show fake information about client.
++.TP
++.B -p
++Port. Port proxy listens for incoming connections. Default is 3128.
++.TP
++.B -l
++Log. By default logging is to stdout. If
++.I logfile
++is specified logging is to file. Under Unix, if
++.RI \' @ \'
++preceeds
++.IR logfile ,
++syslog is used for logging.
++.TP
++.B -S
++Increase or decrease stack size. You may want to try something like -S8192 if you experience 3proxy
++crashes.
++.SH CLIENTS
++You should use client with HTTP proxy support or configure router to redirect
++HTTP traffic to proxy (transparent proxy). Configure client to connect to
++.I internal_ip
++and
++.IR port .
++HTTPS support allows to use almost any TCP based protocol. If you need to
++limit clients, use 
++.BR 3proxy (8)
++instead.
++.SH BUGS
++Report all bugs to
++.BR 3proxy@3proxy.org
++.SH SEE ALSO
++3proxy(8), ftppr(8), socks(8), pop3p(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
++.br
++https://3proxy.org/
++.SH AUTHORS
++3proxy is designed by Vladimir 3APA3A Dubrovin
++.RI ( 3proxy@3proxy.org )
+--- man/pop3p.8
++++ man/pop3p.8
+@@ -75,7 +75,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), ftppr(8), proxy(8), socks(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- man/proxy.8
++++ /dev/null
+@@ -1,78 +0,0 @@
+-.TH proxy "8" "January 2019" "3proxy 0.9" "Universal proxy server"
+-.SH NAME
+-.B proxy
+-\- HTTP proxy gateway service
+-.SH SYNOPSIS
+-.BR "proxy " [ -d ][ -a ]
+-.IB \fR[ -l \fR[ \fR[ @ \fR] logfile \fR]]
+-.IB \fR[ -p port\fR]
+-.IB \fR[ -i internal_ip\fR]
+-.IB \fR[ -e external_ip\fR]
+-.SH DESCRIPTION
+-.B proxy
+-is HTTP gateway service with HTTPS and FTP over HTTPS support.
+-.SH OPTIONS
+-.TP
+-.B -I
+-Inetd mode. Standalone service only.
+-.TP
+-.B -d
+-Daemonise. Detach service from console and run in the background.
+-.TP
+-.B -t
+-Be silenT. Do not log start/stop/accept error records.
+-.TP
+-.B -u
+-Never ask for username authentication
+-.TP
+-.B -e
+-External address. IP address of interface proxy should initiate connections
+-from. 
+-By default system will deside which address to use in accordance
+-with routing table.
+-.TP
+-.B -i
+-Internal address. IP address proxy accepts connections to.
+-By default connection to any interface is accepted. It\'s usually unsafe.
+-.TP
+-.B -a
+-Anonymous. Hide information about client.
+-.TP
+-.B -a1
+-Anonymous. Show fake information about client.
+-.TP
+-.B -p
+-Port. Port proxy listens for incoming connections. Default is 3128.
+-.TP
+-.B -l
+-Log. By default logging is to stdout. If
+-.I logfile
+-is specified logging is to file. Under Unix, if
+-.RI \' @ \'
+-preceeds
+-.IR logfile ,
+-syslog is used for logging.
+-.TP
+-.B -S
+-Increase or decrease stack size. You may want to try something like -S8192 if you experience 3proxy
+-crashes.
+-.SH CLIENTS
+-You should use client with HTTP proxy support or configure router to redirect
+-HTTP traffic to proxy (transparent proxy). Configure client to connect to
+-.I internal_ip
+-and
+-.IR port .
+-HTTPS support allows to use almost any TCP based protocol. If you need to
+-limit clients, use 
+-.BR 3proxy (8)
+-instead.
+-.SH BUGS
+-Report all bugs to
+-.BR 3proxy@3proxy.org
+-.SH SEE ALSO
+-3proxy(8), ftppr(8), socks(8), pop3p(8), tcppm(8), udppm(8), syslogd(8),
+-.br
+-https://3proxy.org/
+-.SH AUTHORS
+-3proxy is designed by Vladimir 3APA3A Dubrovin
+-.RI ( 3proxy@3proxy.org )
+--- man/smtpp.8
++++ man/smtpp.8
+@@ -76,7 +76,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), ftppr(8), proxy(8), socks(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- man/socks.8
++++ man/socks.8
+@@ -76,7 +76,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), proxy(8), ftppr(8), pop3p(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), pop3p(8), tcppm(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- man/tcppm.8
++++ man/tcppm.8
+@@ -65,7 +65,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), proxy(8), ftppr(8), socks(8), pop3p(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), pop3p(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- man/tlspr.8
++++ man/tlspr.8
+@@ -78,7 +78,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), ftppr(8), proxy(8), socks(8), pop3p(8), smtpp(8), tcppm(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), pop3p(8), smtpp(8), tcppm(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS
+--- man/udppm.8
++++ man/udppm.8
+@@ -71,7 +71,7 @@
+ Report all bugs to
+ .BR 3proxy@3proxy.org
+ .SH SEE ALSO
+-3proxy(8), proxy(8), ftppr(8), socks(8), pop3p(8), udppm(8), syslogd(8),
++3proxy(8), ftppr(8), htproxy(8), socks(8), pop3p(8), tlspr(8), udppm(8), syslogd(8),
+ .br
+ https://3proxy.org/
+ .SH AUTHORS

3proxy-0.9.4-poll-build.patch

@@ -0,0 +1,39 @@
+--- src/common.c
++++ src/common.c
+@@ -157,7 +157,7 @@
+  WINAPI
+ #endif
+ 
+-    mypoll(struct mypollfd *fds, unsigned int nfds, int timeout){
++    mypoll(struct mypollfd *fds, nfds_t nfds, int timeout){
+ 	fd_set readfd;
+ 	fd_set writefd;
+ 	fd_set oobfd;
+--- src/structures.h
++++ src/structures.h
+@@ -69,6 +69,7 @@
+ #ifdef WITH_POLL
+ #include <poll.h>
+ #else
++typedef unsigned int nfds_t;
+ #ifdef WITH_WSAPOLL
+ 
+ #define poll(A,B,C) WSAPoll(A,B,C)
+@@ -84,7 +85,7 @@
+ #ifdef _WIN32
+   WINAPI
+ #endif
+-   mypoll(struct mypollfd *fds, unsigned int nfds, int timeout);
++   mypoll(struct mypollfd *fds, nfds_t nfds, int timeout);
+ #ifndef POLLIN
+ #define POLLIN 1
+ #endif
+@@ -434,7 +435,7 @@
+ 	int (WINAPI *_getsockname)(void* state, SOCKET s, struct sockaddr * name, int * namelen);
+    	int (WINAPI *_getsockopt)(void* state, SOCKET s, int level, int optname, char * optval, int * optlen);
+ 	int (WINAPI *_setsockopt)(void* state, SOCKET s, int level, int optname, const char *optval, int optlen);
+-	int (WINAPI *_poll)(void* state, struct pollfd *fds, unsigned int nfds, int timeout);
++	int (WINAPI *_poll)(struct pollfd *fds, nfds_t nfds, int timeout);
+ 	int (WINAPI *_send)(void* state, SOCKET s, const char *msg, int len, int flags);
+ 	int  (WINAPI *_sendto)(void* state, SOCKET s, const char *msg, int len, int flags, const struct sockaddr *to, int tolen);
+ 	int  (WINAPI *_recv)(void* state, SOCKET s, char *buf, int len, int flags);

3proxy.cfg

@@ -0,0 +1,178 @@
+# Yes, 3proxy.cfg can be executable, in this case you should place
+# something like
+#config /usr/local/3proxy/3proxy.cfg
+# to show which configuration 3proxy should re-read on realod.
+
+#system "echo Hello world!"
+# you may use system to execute some external command if proxy starts
+
+# We can configure nservers to avoid unsafe gethostbyname() usage
+#nserver 10.1.2.1
+#nserver 10.2.2.2
+# nscache is good to save speed, traffic and bandwidth
+nscache 65536
+
+#nsrecord porno.security.nnov.ru 0.0.0.0
+# nobody will be able to access porno.security.nnov.ru by the name.
+#nsrecord wpad.security.nnov.ru www.security.nnov.ru
+# wpad.security.nnov.ru will resolve to www.security.nnov.ru for
+# clients
+
+
+timeouts 1 5 30 60 180 1800 15 60
+# Here we can change timeout values
+
+users 3APA3A:CL:3apa3a "test:CR:$1$qwer$CHFTUFGqkjue9HyhcMHEe1"
+# note that "" required, overvise $... is treated as include file name.
+# $1$qwer$CHFTUFGqkjue9HyhcMHEe1 is 'test' in MD5 crypt format.
+#users $/usr/local/etc/3proxy/passwd
+# this example shows you how to include passwd file. For included files
+# <CR> and <LF> are treated as field separators.
+
+daemon
+# now we will not depend on any console (daemonize). daemon must be given
+# before any significant command on *nix.
+
+#service
+# service is required under NT if you want 3proxy to start as service
+
+#log /usr/local/etc/3proxy/logs/3proxy.log D
+log /var/log/3proxy/3proxy.log
+# log allows to specify log file location and rotation, D means logfile
+# is created daily
+
+# in log file we want to have underscores instead of spaces
+logformat "- +_L%t.%.  %N.%p %E %U %C:%c %R:%r %O %I %h %T"
+#logformat "L%d-%m-%Y %H:%M:%S %z %N.%p %E %U %C:%c %R:%r %O %I %h %T"
+#logformat "Linsert into log (l_date, l_user, l_service, l_in, l_out, l_descr) values ('%d-%m-%Y %H:%M:%S', '%U', '%N', %I, %O, '%T')"
+
+archiver gz /bin/gzip %F
+#archiver zip zip -m -qq %A %F
+#archiver zip pkzipc -add -silent -move %A %F
+#archiver rar rar a -df -inul %A %F
+# if archiver specified log file will be compressed after closing.
+# you should specify extension, path to archiver and command line, %A will be
+# substituted with archive file name, %f - with original file name.
+# Original file will not be removed, so archiver should care about it.
+
+rotate 30
+# We will keep last 30 log files
+
+auth iponly
+#auth nbname
+#auth strong
+# auth specifies type of user authentication. If you specify none proxy
+# will not do anything to check name of the user. If you specify
+# nbname proxy will send NetBIOS name request packet to UDP/137 of
+# client and parse request for NetBIOS name of messanger service.
+# Strong means that proxy will check password. For strong authentication
+# unknown user will not be allowed to use proxy regardless of ACL.
+# If you do not want username to be checked but wanna ACL to work you should
+# specify auth iponly.
+
+
+#allow ADMINISTRATOR,root
+#allow * 127.0.0.1,192.168.1.1 * *
+#redirect 192.168.1.2 80 * * * 80
+#allow * 192.168.1.0/24 * 25,53,110,20-21,1024-65535
+# we will allow everything if username matches ADMINISTRATOR or root or
+# client ip is 127.0.0.1 or 192.168.1.1. Overwise we will redirect any request
+# to port 80 to our Web-server 192.168.0.2.
+# We will allow any outgoing connections from network 192.168.1.0/24 to
+# SMTP, POP3, FTP, DNS and unprivileged ports.
+# Note, that redirect may also be used with proxy or portmapper. It will
+# allow you to redirect requests to different ports or different server
+# for different clients.
+
+#  sharing access to internet
+
+#external 10.1.1.1
+external 0.0.0.0
+# external is address 3proxy uses for outgoing connections. 0.0.0.0 means any
+# interface. Using 0.0.0.0 is not good because it allows to connect to 127.0.0.1
+
+#internal 192.168.1.1
+internal 127.0.0.1
+# internal is address of interface proxy will listen for incoming requests
+# 127.0.0.1 means only localhost will be able to use this proxy. This is
+# address you should specify for clients as proxy IP.
+# You MAY use 0.0.0.0 but you shouldn't, because it's a chance for you to
+# have open proxy in your network in this case.
+
+auth none
+# no authentication is requires
+
+dnspr
+
+# dnsproxy listens on UDP/53 to answer client's DNS requests. It requires
+# nserver/nscache configuration.
+
+
+#external $./external.ip
+#internal $./internal.ip
+# this is just an alternative form fo giving external and internal address
+# allows you to read this addresses from files
+
+auth strong
+# We want to protect internal interface
+deny * * 127.0.0.1,192.168.1.1
+# and llow HTTP and HTTPS traffic.
+allow * * * 80-88,8080-8088 HTTP
+allow * * * 443,8443 HTTPS
+proxy -n
+
+auth none
+# pop3p will be used without any authentication. It's bad choice
+# because it's possible to use pop3p to access any port
+pop3p
+
+tcppm 25 mail.my.provider 25
+#udppm -s 53 ns.my.provider 53
+# we can portmap port TCP/25 to provider's SMTP server and UDP/53
+# to provider's DNS.
+# Now we can use our proxy as SMTP and DNS server.
+# -s switch for UDP means "single packet" service - instead of setting
+# association for period of time association will only be set for 1 packet.
+# It's very userfull for services like DNS but not for some massive services
+# like multimedia streams or online games.
+
+auth strong
+flush
+allow 3APA3A,test
+maxconn 20
+socks
+# for socks we will use password authentication and different access control -
+# we flush previously configured ACL list and create new one to allow users
+# test and 3APA3A to connect from any location
+
+
+auth strong
+flush
+internal 127.0.0.1
+allow 3APA3A 127.0.0.1
+maxconn 3
+admin
+#only allow acces to admin interface for user 3APA3A from 127.0.0.1 address
+#via 127.0.0.1 address.
+
+# map external 80 and 443 ports to internal Web server
+# examples below show how to use 3proxy to publish Web server in internal
+# network to Internet. We must switch internal and external addresses and
+# flush any ACLs
+
+#auth none
+#flush
+#external $./internal.ip
+#internal $./external.ip
+#maxconn 300
+#tcppm 80 websrv 80
+#tcppm 443 websrv 443
+
+
+#chroot /usr/local/jail
+#setgid 65535
+#setuid 65535
+# now we needn't any root rights. We can chroot and setgid/setuid.
+
+
+###$Id: 3proxy.cfg.sample,v 1.5 2004/07/16 12:37:20 vlad Exp $#######

3proxy.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=3proxy Proxy Server
+After=syslog.target network.target
+
+[Service]
+Type=forking
+ExecStart=/usr/bin/3proxy /etc/3proxy.cfg
+
+[Install]
+WantedBy=multi-user.target

3proxy.spec

@@ -0,0 +1,97 @@
+%global _hardened_build 1
+
+Name:             3proxy
+Version:          0.9.5
+Release:          %autorelease
+
+Summary:          Tiny but very powerful proxy
+Summary(ru):      Маленький, но крайне мощный прокси-сервер
+
+License:          BSD-3-Clause OR Apache-2.0 OR GPL-2.0-or-later OR LGPL-2.1-or-later
+Url:              http://3proxy.ru/?l=EN
+Source0:          https://github.com/%{name}/%{name}/archive/%{version}.tar.gz#/%{name}-%{version}.tar.gz
+Source2:          3proxy.cfg
+Source3:          3proxy.service
+
+BuildRequires:    gcc
+BuildRequires:    make
+BuildRequires:    openssl-devel
+BuildRequires:    systemd-rpm-macros
+
+# I correct config path in man only. It is fully Fedora related.
+Patch0:           3proxy-0.6.1-config-path.patch
+# Fixes *_poll build error
+Patch1:           3proxy-0.9.4-poll-build.patch
+# Adapt manpages to reflect renamed proxy binary
+Patch2:           3proxy-0.9.4-manpage.patch
+
+%description
+%{name} -- light proxy server.
+Universal proxy server with HTTP, HTTPS, SOCKS v4, SOCKS v4a, SOCKS v5, FTP,
+POP3, UDP and TCP portmapping, access control, bandwith control, traffic
+limitation and accounting based on username, client IP, target IP, day time,
+day of week, etc.
+
+%description -l ru
+%{name} -- маленький прокси сервер.
+Это универсальное решение поддерживающее HTTP, HTTPS, SOCKS v4, SOCKS v4a,
+SOCKS v5, FTP, POP3, UDP и TCP проброс портов (portmapping), списки доступа
+управление скоростью доступа, ограничением трафика и статистикоу, базирующейся
+на имени пользователя, слиентском IP адресе, IP цели, времени дня, дня недели
+и т.д.
+
+
+%prep
+%autosetup -p0
+
+# To use "fedora" CFLAGS (exported)
+sed -i -e "s/^CFLAGS =/CFLAGS +=/" Makefile.Linux
+
+%build
+make -f Makefile.Linux
+
+%install
+mkdir -p %{buildroot}%{_sysconfdir}
+mkdir -p %{buildroot}%{_sysconfdir}/NetworkManager/dispatcher.d/
+mkdir -p %{buildroot}%{_mandir}/man{3,8}
+mkdir -p %{buildroot}%{_localstatedir}/log/%{name}
+install -m755 -D bin/%{name} %{buildroot}%{_bindir}/%{name}
+install -m755 -D bin/ftppr %{buildroot}%{_bindir}/ftppr
+install -m755 -D bin/mycrypt %{buildroot}%{_bindir}/mycrypt
+install -m755 -D bin/pop3p %{buildroot}%{_bindir}/pop3p
+install -m755 -D bin/proxy %{buildroot}%{_bindir}/htproxy
+install -m755 -D bin/smtpp %{buildroot}%{_bindir}/smtpp
+install -m755 -D bin/socks %{buildroot}%{_bindir}/socks
+install -m755 -D bin/tcppm %{buildroot}%{_bindir}/tcppm
+install -m755 -D bin/tlspr %{buildroot}%{_bindir}/tlspr
+install -m755 -D bin/udppm %{buildroot}%{_bindir}/udppm
+
+install -pD -m644 %{SOURCE2} %{buildroot}/%{_sysconfdir}/%{name}.cfg
+install -pD -m755 %{SOURCE3} %{buildroot}/%{_unitdir}/%{name}.service
+
+for man in man/*.{3,8} ; do
+  install "$man" "%{buildroot}%{_mandir}/man${man:(-1)}/"
+done
+
+
+%post
+%systemd_post %{name}.service
+
+%preun
+%systemd_preun %{name}.service
+
+%postun
+%systemd_postun_with_restart %{name}.service
+
+%files
+%license copying
+%doc README authors
+%{_bindir}/*
+%config(noreplace) %{_sysconfdir}/%{name}.cfg
+%{_localstatedir}/log/%{name}
+%{_mandir}/man8/*.8.gz
+%{_mandir}/man3/*.3.gz
+%{_unitdir}/%{name}.service
+
+%changelog
+%autochangelog

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: 3proxy
-# $Id$
-NAME := 3proxy
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attept a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

changelog

@@ -0,0 +1,211 @@
+* Tue Feb 20 2024 Tim Semeijn <tim@goat.re> - 0.9.4-2
+- Fix failing builds with *_poll build patch (3proxy-0.9.4-poll-build.patch)
+- Convert license to SPDX
+ 
+* Sun Feb 11 2024 Fabio Alessandro Locati <fale@fedoraproject.org> - 0.9.4-1
+- Update to 0.9.4, fixes rhbz#1888503
+- Fix FTBFS, fixes rhbz#2261821
+ 
+* Mon Jan 29 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-14
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+ 
+* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+ 
+* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+ 
+* Thu Jan 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-11
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+ 
+* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+ 
+* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+ 
+* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+ 
+* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+ 
+* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+ 
+* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.8.13-5
+- Rebuilt for updated fedora-rpm-macros.
+  See https://pagure.io/fesco/issue/2583.
+ 
+* Mon Jan 25 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+ 
+* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+ 
+* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.13-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+ 
+* Tue Oct 22 2019 Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.13-1
+- Update to 0.8.13 version (bz#1742435).
+- Try build on epel8 (bz#1757824).
+- Completely remove SOURCE1 sysvinit legacy.
+- Reformat with spaces.
+ 
+* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.12-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+ 
+* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.12-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+ 
+* Sat Nov 17 2018 Peter Robinson <pbrobinson@fedoraproject.org> 0.8.12-1
+- Update 0.8.12
+- Retire sysvinit
+ 
+* Thu Jul 12 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+ 
+* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+ 
+* Wed Aug 02 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+ 
+* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+ 
+* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+ 
+* Wed Feb 03 2016 Fedora Release Engineering <releng@fedoraproject.org> - 0.8.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+ 
+* Sat Jan 23 2016 Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-1
+- Major upstream update - 0.8.2. Bz#1300097.
+- Tarballs now on github.
+ 
+* Fri Jan 01 2016 Pavel Alexeev <Pahan@Hubbitus.info> - 0.7.1.3-1
+- New upstream release 0.7.1.3 - bz#1263482.
+ 
+* Tue Jun 16 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.7.1.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+ 
+* Thu Mar 05 2015 Adam Jackson <ajax@redhat.com> 0.7.1.2-2
+- Drop sysvinit subpackage on F23+
+ 
+* Mon Feb 23 2015 Pavel Alexeev <Pahan@Hubbitus.info> - 0.7.7.2-1
+- New upstream version 0.7.7.2
+ 
+* Mon Aug 18 2014 Pavel Alexeev <Pahan@Hubbitus.info> - 0.7.7.1-1
+- Update to 0.7.7.1 - bz#1114274.
+ 
+* Fri Aug 15 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.7-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+ 
+* Fri Jun 06 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.7-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+ 
+* Tue Apr 8 2014 Pavel Alexeev <Pahan@Hubbitus.info> - 0.7-1
+- Update to 0.7 version bz#1085256.
+- Add BR openssl-devel.
+ 
+* Tue Jan 7 2014 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-18
+- Step to systemd macroses (#850383)
+ 
+* Fri Aug 02 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.1-17
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+ 
+* Fri Apr 26 2013 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-16
+- Harden build - bz#955141
+ 
+* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.1-15
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+ 
+* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.1-14
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+ 
+* Thu Jan 12 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.1-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+ 
+* Thu Jun 23 2011 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-12
+- Make service systemd compliant (BZ#657412).
+ 
+* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.1-11
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+ 
+* Thu Nov 4 2010 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-10
+- Add man3/3proxy.cfg.3 man (BZ#648204).
+- Gone explicit man gzip - leave it for rpm.
+ 
+* Sun May 30 2010 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-9
+- Correct path to config file in man (BUG#596087) add Patch0: 3proxy-0.6.1-config-path.patch
+ 
+* Mon Mar 15 2010 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.1-8
+- Update to version 0.6.1
+- In NM event processing replace service restart to condrestart - BZ#572662
+ 
+* Wed Nov 25 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-7
+- Again new init-script for Fix BZ#533144 :).
+ 
+* Wed Nov 25 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-6
+- Forgot commit new init-script for Fix BZ#533144.
+ 
+* Sun Nov 8 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-5
+- Fix BZ#533144:
+- Add reload section to service file, fix stop.
+- Add %%{_sysconfdir}/NetworkManager/dispatcher.d/40-%%{name} (Thanks to Pankaj Pandey)
+- Include man-files.
+- Add Requires: initscripts as owner directory %%{_sysconfdir}/NetworkManager/dispatcher.d/
+* Thu Aug 20 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-3
+- Fedora Review started - thank you Peter Lemenkov.
+- Change rights (0755->0644) of config.
+- Disable service by default.
+- Add BR dos2unix.
+ 
+* Mon Aug 17 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-2
+- /usr/bin/proxy renamed to htproxy to avoid name bump with libproxy-bin.
+- Add Source2: 3proxy.cfg from Alt Linux (slightly modified) - http://sisyphus.ru/ru/srpm/Sisyphus/3proxy/sources/1 (thanks to Afanasov Dmitry).
+- Add log-dir %%{_localstatedir}/log/%%{name}
+* Mon Aug 17 2009 Pavel Alexeev <Pahan@Hubbitus.info> - 0.6-1
+- Ressurect old spec. New version 0.6.
+- Rename spec to classic %%{name}.spec.
+- Remove Hu part from release and add %%{?dist}.
+- Change summary, description, URL. Add Russian localisation of sumamry and description.
+- Strip some old comments.
+- Add to %%doc Readme Changelog authors copying news.
+- Turn macros usage from %%name to %%{name} for consistence.
+- Change group from System/Servers to standard System Environment/Daemons.
+- Add %%defattr(-,root,root,-) in %%files section.
+- Add cleanup in %%install section.
+- Add %%clean section with cleanup buildroot.
+- License changed from just GPL to "BSD or ASL 2.0 or GPLv2+ or LGPLv2+" (according to Makefile.Linux)
+- Add %%config(noreplace) mark to all configs.
+- Add file %%{_initdir}/%%{name}
+- Old %%{_initdir} macros replaced by %%{_initrddir}
+- Hack makefile to use system CFLAGS.
+- Add %%post/%%postun sections.
+ 
+* Fri Jan 25 2008 Pavel Alexeev <Pahan [ at ] Hubbitus [ DOT ] info> - 0.5.3k
+- Import from ftp://ftp.nluug.nl/pub/os/Linux/distr/altlinux/4.0/Server/4.0.1/files/SRPMS/3proxy-0.5.3h-alt1.src.rpm
+	Combine with ftp://ftp.pbone.net/mirror/ftp.sourceforge.net/pub/sourceforge/t/th/three-proxy/3proxy-0.5.3g-1.src.rpm
+- Steep to version 0.5.3k
+- Comment out packager
+- Reformat header of spec with tabs
+- Add desc from second src.rpm of import
+- Correct source0
+- Add -c key fo %%setup macro
+- Add BuildRoot definition (this is not ALT)
+- Change
+	Release:	alt1
+	to
+	Release:	0.Hu.0
+ 
+* Fri Apr 13 2007 Lunar Child <luch@altlinux.ru> 0.5.3h-alt1
+- new version
+ 
+* Wed Mar 21 2007 Lunar Child <luch@altlinux.ru> 0.5.3g-alt2
+- Added init script.
+- Added new trivial config file.
+ 
+* Tue Mar 20 2007 Lunar Child <luch@altlinux.ru> 0.5.3g-alt1
+- First build for ALT Linux Sisyphus

sources

@@ -0,0 +1 @@
+SHA512 (3proxy-0.9.5.tar.gz) = b668db6438da19ee2479228af744b9b3b9ff2c7e6d97aaf3b20737b165ab2baf656ac9ea92b6f1e169c428784c7d9e3e7eeb7c3effb1c0b77e5038319b6d2bcd