12 changed files with 250 additions and 1131 deletions
--- a/.gitignore
+++ b/.gitignore
@ -1,16 +1 @@
 OpenIPMI-2.0.18.tar.gz
-/OpenIPMI-2.0.19.tar.gz
-/openipmi-2.0.21.tar.gz
-/OpenIPMI-2.0.21.tar.gz
-/OpenIPMI-2.0.22.tar.gz
-/OpenIPMI-2.0.23.tar.gz
-/OpenIPMI-2.0.24.tar.gz
-/OpenIPMI-2.0.25.tar.gz
-/OpenIPMI-2.0.27.tar.gz
-/OpenIPMI-2.0.28.tar.gz
-/OpenIPMI-2.0.29.tar.gz
-/OpenIPMI-2.0.31.tar.gz
-/OpenIPMI-2.0.32.tar.gz
-/OpenIPMI-2.0.34.tar.gz
-/OpenIPMI-2.0.35.tar.gz
-/OpenIPMI-2.0.36.tar.gz
--- a/0001-man.patch
+++ b/0001-man.patch
@ -1,543 +0,0 @@
-From dfca464e5fe4c9107f08bff7e6e2730a504945b7 Mon Sep 17 00:00:00 2001
-From: Boris Ranto <branto@redhat.com>
-Date: Thu, 2 Jun 2016 12:47:22 +0200
-Subject: [PATCH] Apply './OpenIPMI-2.0.19-man.patch'
-
-Signed-off-by: Boris Ranto <branto@redhat.com>
---
- lanserv/ipmilan.8       | 13 ++++++++++---
- man/ipmi_cmdlang.7      | 36 ++++++++++++++++++------------------
- man/ipmi_ui.1           | 10 +++++-----
- man/openipmi_conparms.7 |  4 ++--
- man/openipmicmd.1       |  6 +++---
- man/openipmigui.1       | 12 ++++++------
- man/openipmish.1        | 12 +++++++++++-
- man/rmcp_ping.1         |  2 +-
- man/solterm.1           |  6 +++---
- sample/ipmicmd.c        |  1 +
- sample/rmcp_ping.c      |  5 +++++
- sample/solterm.c        |  7 ++++++-
- ui/basic_ui.c           | 25 +++++++++++++++++++++++++
- 13 files changed, 96 insertions(+), 43 deletions(-)
-
-diff --git a/lanserv/ipmilan.8 b/lanserv/ipmilan.8
-index ff43d5c..9360507 100644
--- a/lanserv/ipmilan.8
-+++ b/lanserv/ipmilan.8
-@@ -29,18 +29,25 @@ address they came in.
- 
- .SH OPTIONS
- .TP
-.BI \-c\  config-file
-+\fB\-c\fR file,\ \fB\-\-config\-file\fR file
- Set the configuration file to one other than the default of
- .I "/etc/ipmi_lan.conf"
- .TP
-.B \-n
-+\fB\-i\fR device,\ \fB\-\-ipmi-dev\fR device
-+Sets the desired device
-+.TP
-+\fB\-n\fR,\ \fB\-\-daemonize\fR
- Stops  the  daemon  from  forking  and  detaching  from the controlling
- terminal. This is useful for running from init.
- .TP
-.B \-d
-+\fB\-d\fR,\ \fB\-\-debug\fR
- Turns on debugging to standard output.  You generally have to use
- .B \-n
- with this.
-+.TP
-+\fB\-?\fR,\ \fB\-\-help\fR,\ \fB\-\-usage\fR
-+Prints brief usage hints message.
-+
- 
- 
- .SH CONFIGURATION
-diff --git a/man/ipmi_cmdlang.7 b/man/ipmi_cmdlang.7
-index 4d18e76..a6d73b9 100644
--- a/man/ipmi_cmdlang.7
-+++ b/man/ipmi_cmdlang.7
-@@ -246,7 +246,7 @@ instance, the command to create a domain is
- The command to list all sensors in a domain named domain1 is
- .B sensor list domain1.
- 
-Each command has a reponse for each object operated on, which is
-+Each command has a response for each object operated on, which is
- listed after the command description.  In those responses, anything
- that begins with a
- .B %
-@@ -316,7 +316,7 @@ BMC.  For that, notice that the LAN connection has an options extra IP
- and port for the second IP address.  OpenIPMI supports these IP
- addresses and connection, detecting failures, switching between
- addresses, and other fault-tolerant things.  It does this
-transparently to the user.  Mutiple connections may require special
-+transparently to the user.  Multiple connections may require special
- OEM support, read the documentation about your specific system if you
- need this.
- 
-@@ -336,7 +336,7 @@ or
- \fI<name>\fP and \fI<password>\fP are the user name and password of
- the IPMI user to use for the connection.
- The <smi num> is the driver number, generally 0.
-Options enable and disable various automitic processing and are:
-+Options enable and disable various automatic processing and are:
- .PD 0
- .HP
- .B -[no]all
-@@ -356,7 +356,7 @@ is false by default.
- is false by default.
- .HP
- .B -[no]ipmbscan
-- IPMB bus scanning.  This turns on scanning IPMB busses when they are found.
-+- IPMB bus scanning.  This turns on scanning IPMB buses when they are found.
- This is false by default.
- .HP
- .B -[no]oeminit
-@@ -461,7 +461,7 @@ available hacks are:
- The -M option sets the maximum outstanding messages.  The default is
- 2, ranges 1-63.
- 
-Options enable and disable various automitic processing and are:
-+Options enable and disable various automatic processing and are:
- .PD 0
- .HP
- .B -[no]all
-@@ -519,7 +519,7 @@ Domain Created: <domain>
- .RE
- 
- .B fru <domain> <is_logical> <device_address> <device_id> <lun> <private_bus> <channel>
-- dump a fru given all it's insundry information.
-+- dump a fru given all it's sundry information.
- .TP
- Response:
- .RS
-@@ -533,7 +533,7 @@ Domain
- 
- .B msg <domain> <channel> <ipmb> <LUN> <NetFN> <Cmd> [data...]
- - Send a command to the given IPMB address on the given channel and
-display the response.  Note that this does not require the existance
-+display the response.  Note that this does not require the existence
- of an MC in OpenIPMI.
- .TP
- Response:
-@@ -571,7 +571,7 @@ SEL Rescan done: <domain>
- .RE
- 
- .B presence <domain>
-- Audit the presence of all enities in the domain.  Note that this just
-+- Audit the presence of all entities in the domain.  Note that this just
- starts the process; it will run in the background.
- .TP
- Response is:
-@@ -689,7 +689,7 @@ FRU deleted: <fru>
- - Set the value of a FRU element.  The
- name is the record name, or multi-record.  The number is required
- for fields that need it (custom and multi-record).  The value is
-an a single value for integers.  For strings it is a string
-+a single value for integers.  For strings it is a string
- type (either binary, ascii, or unicode) and the info.  Binary and
- unicode data is specified as numbers.  ascii data is specified in
- a string.  Note that setting a ascii value with no string will
-@@ -770,7 +770,7 @@ Domain
- .B info <entity>
- - Dump information about an entity.
- .TP
-Reponse:
-+Response:
- .RS
- .nf
- Entity
-@@ -784,7 +784,7 @@ Entity
- .B fru <entity>
- - Dump the FRU information about the given entity.
- .TP
-Reponse:
-+Response:
- .RS
- .nf
- Entity
-@@ -813,7 +813,7 @@ Entity
- .B set_act_time <entity>
- - Set the hot-swap auto-activate time.
- .TP
-Reponse:
-+Response:
- .RS
- .nf
- Set act time: <entity>
-@@ -981,7 +981,7 @@ Response:
- .nf
- Sensor
-   Name: <sensor>
-  Positivie Hysteresis: <integer>
-+  Positive Hysteresis: <integer>
-   Negative Hysteresis: <integer>
- .fi
- .RE
-@@ -1101,7 +1101,7 @@ Set done: <control>
- .RE
- 
- .B get <control>
-- Get the value of a control.  The reponse depends
-+- Get the value of a control.  The response depends
- on the control type.
- .TP
- Response:
-@@ -1128,7 +1128,7 @@ multiple lights.  The options values (marked with
- ) will not be
- present if local control is set to true.  Local control means that
- the LED takes whatever default function it does on the device
-(like disk activity, ethernet activity, hot-swap LED, etc.).
-+(like disk activity, Ethernet activity, hot-swap LED, etc.).
- Response for id control:
- .RS
- .nf
-@@ -1325,7 +1325,7 @@ Channel Access
- - Set information about the MC's channel access.  There are two different
- places where this is stored, the present in-use values (volatile) and the
- non-volatile storage that is loaded at startup.  Note if you specify
-channel 0xe, the modified channel will be the current channel.  Parms
-+channel 0xe, the modified channel will be the current channel.  Parameters
- are:
- .RS
- .nf
-@@ -1547,7 +1547,7 @@ PET destroyed: <pet>
- .SS pef
- commands dealing with platform even filters.  These are basically
- connections to the PEF configuration parameters in an MC.  You use a
-pef to fetch a pef config, which you can then modify and write back to
-+pef to fetch a pef configuration, which you can then modify and write back to
- the MC.  Note that when you get a pef config, you claim a lock on the
- MC that must be unlocked.
- 
-@@ -1780,7 +1780,7 @@ operational and finished all it SDR, FRU, and bus scans:
- .fi
- .RE
- 
-The following comes out when domain connection infomration changes:
-+The following comes out when domain connection information changes:
- .RS
- .nf
-   EVENT
-diff --git a/man/ipmi_ui.1 b/man/ipmi_ui.1
-index 9c5d9b6..011255f 100644
--- a/man/ipmi_ui.1
-+++ b/man/ipmi_ui.1
-@@ -4,7 +4,7 @@
- ipmi_ui \- Crude interface to an IPMI system
- 
- .SH SYNOPSIS
-.B ipmiui
-+.B ipmi_ui
- .RB [\| \-dmsg \|]
- .RB [\| \-dmem \|]
- .RB [\| \-c \|]
-@@ -34,7 +34,7 @@ Normally,
- starts up in a full-screen format.  The left window shows the output
- of commands, the right window shows the logs from OpenIPMI.  Both
- windows are scrollable with page up and page down keys, press the "\fBF1\fP"
-key to choose the the left window to scroll, the "\fBF2\fP" key to choose
-+key to choose the left window to scroll, the "\fBF2\fP" key to choose
- the right window to scroll.
- 
- Note that you must set your environment \fBTERM\fP variable properly for
-@@ -48,7 +48,7 @@ the connections are to the same IPMI domain through different
- management controllers.  Also, each LAN connection may have two IP
- addresses.  These are two different addresses to the same management
- controller.  So you may have a total of 4 IP addresses to an IPMI
-domain, two management controllers and two IP adresses to each
-+domain, two management controllers and two IP addresses to each
- management controller.
- 
- .SH OPTIONS
-@@ -174,12 +174,12 @@ turns events on or off from the sensor (\fB0\fP or \fB1\fP).
- turns scanning on or off for the sensor (\fB0\fP or \fB1\fP).
- .I "assertion-bitmask"
- specifies the bitmask of thresholds or states
-that should be enabled or disabled when a thrshold or state is
-+that should be enabled or disabled when a threshold or state is
- asserted.  It is a bunch of 0's and 1's, where the first one is for
- threshold/state 0, the second for threshold/state 1, etc.
- .I "deassertion-bitmask"
- specifies the bitmask of thresholds or states
-that should be enabled or disabled when a thrshold or state is
-+that should be enabled or disabled when a threshold or state is
- deasserted.
- 
- .SH CONTROLS
-diff --git a/man/openipmi_conparms.7 b/man/openipmi_conparms.7
-index 587da2a..9dc6404 100644
--- a/man/openipmi_conparms.7
-+++ b/man/openipmi_conparms.7
-@@ -1,7 +1,7 @@
- .TH openipmi_conparms 7 05/13/03 OpenIPMI "Connection Parameters for OpenIPMI"
- 
- .SH NAME
-openipmi_cmdparms \- Connection parmeters for OpenIPMI
-+openipmi_cmdparms \- Connection parameters for OpenIPMI
- 
- .SH SYNOPSIS
- 
-@@ -97,7 +97,7 @@ use.
- .TP
- .BI \-Rc\  confidentiality\ algorithm
- The \fIRMCP+ confidentiality (encryption) algorithm\fP to use.  This keeps
-evesdroppers from seeing the data.  Valid values are: \fBbmcpick\fP,
-+eavesdroppers from seeing the data.  Valid values are: \fBbmcpick\fP,
- \fBaes_cbc_128\fP, \fBxrc4_128\fP, and \fBxrc_40\fP.  The \fBbmcpick\fP option is used by
- default, which means the BMC picks the algorithm it wants to use.
- 
-diff --git a/man/openipmicmd.1 b/man/openipmicmd.1
-index 6bd2401..5d206d1 100644
--- a/man/openipmicmd.1
-+++ b/man/openipmicmd.1
-@@ -22,7 +22,7 @@ interfaces.
- Execute a single command an exit.
- 
- .TP
-.BI <connection parms>
-+.BI <connection\ parms>
- The parameters for the connection depend on the connection type.
- These are all described in openipmi_conparms (7)
- 
-@@ -32,7 +32,7 @@ Once up, you can execute commands in the user interface.  Note that
- commands and responses are asynchronous, you issue a command and the
- interface returns immediately.  When the response comes back, it will
- be dumped on your console.  That's a little strange looking, but IPMI
-is ansychronous underneath.  Note that the \fB\-k\fP option is synchronous,
-+is asynchronous underneath.  Note that the \fB\-k\fP option is synchronous,
- it will wait for the response or a timeout before returning.
- 
- .TP
-@@ -82,7 +82,7 @@ Remove a command registration.
- .BR openipmi_conparms (7)
- 
- .SH "KNOWN PROBLEMS"
-The asychronous nature of the program can be annoying.
-+The asynchronous nature of the program can be annoying.
- 
- .SH AUTHOR
- .PP
-diff --git a/man/openipmigui.1 b/man/openipmigui.1
-index 04f880b..0c8c10f 100644
--- a/man/openipmigui.1
-+++ b/man/openipmigui.1
-@@ -38,7 +38,7 @@ Turn on message debugging, this will dump all messages to debug log output.
- .TP
- .B \-\-drawmsg
- Turn on raw message debugging, this will dump all low-level messages to
-debug log output.  This differes from normal message debugging in that all
-+debug log output.  This differs from normal message debugging in that all
- protocol messages are also dumped, not just IPMI messages.
- .TP
- .B \-\-dmem
-@@ -81,7 +81,7 @@ tree.
- 
- The tree window has a top-level list of all the domains for which
- OpenIPMI has connections (or pending connection).  Each domain
-exapands into domain-specific information and a list of entities and
-+expands into domain-specific information and a list of entities and
- Management Controllers (MCs) for that domain.
- 
- Right click drives most of the operations in the tree window.  Many
-@@ -92,7 +92,7 @@ Color is used in the GUI to denote error status, and shading is used
- to denote availability.  If a sensor has an error, the tree entry for
- that sensor will change colors.  Black means no error, yellow means
- warning, red means critical, and blue means non-recoverable.  These
-errors propigate up, so the entity containing that sensor will be the
-+errors propagate up, so the entity containing that sensor will be the
- same color as the most critical error for the sensors underneath it.
- The same goes for domain, it will be the same color as the most
- critical error for the entities underneath it.  This way, if you watch
-@@ -146,7 +146,7 @@ that sensor.
- 
- .SH CONTROLS
- 
-Controls are available under the entity they belong to.  control
-+Controls are available under the entity they belong to.  Control
- information is beyond the scope of this document, as IPMI controls are
- very complex.  See the IPMI document from OpenIPMI for information
- about controls.
-@@ -214,7 +214,7 @@ channel listing.  Note that some user setting (the name and password)
- are global to all channels on the MC.
- 
- Due to the IPMI spec and some unfortunate implementation bugs, some
-wierd issues exist with this information.  The user has an Enabled
-+weird issues exist with this information.  The user has an Enabled
- value that tells whether the user is enabled or not.  When initially
- displayed, this field shows as a "?" because this field is not
- readable. It will displayed as the actual value when it is modified,
-@@ -247,7 +247,7 @@ changed.
- .SH SOLPARMS
- 
- In the channel display on a 8023_LAN channel, a LANPARM configuration
-command is available if the MC supporte SOL (Serial Over LAN).  This
-+command is available if the MC supports SOL (Serial Over LAN).  This
- pulls up all the parameters for the LAN and allows them to be set.
- Right-clicking on an item allows it to be changed.
- 
-diff --git a/man/openipmish.1 b/man/openipmish.1
-index 36b1e43..2c902e4 100644
--- a/man/openipmish.1
-+++ b/man/openipmish.1
-@@ -26,7 +26,7 @@ Turn on message debugging, this will dump all messages to debug log output.
- .TP
- .B \-\-drawmsg
- Turn on raw message debugging, this will dump all low-level messages to
-debug log output.  This differes from normal message debugging in that all
-+debug log output.  This differs from normal message debugging in that all
- protocol messages are also dumped, not just IPMI messages.
- .TP
- .B \-\-dmem
-@@ -34,11 +34,21 @@ Turn on memory debugging, this will cause memory allocation and
- deallocations to be checked.  When the program terminates, it will
- dump all memory that was not properly freed (leaked).
- .TP
-+.B \-\-dmsgerr
-+Turn on printing out low-level message errors.
-+.TP
- .B \-\-dlock
- Turn on lock debugging, this will check lock operations to make sure
- that locks are help in all the proper places and make sure that locks
- are properly nested.
- .TP
-+\fB-x\fR\ <string>,\ \fB\-\-execute\fR\ <string>
-+Execute the given string at startup.  This may be entered multiple times
-+for multiple commands.
-+.TP
-+.B \-\-glib
-+Use glib for the OS handler.
-+.TP
- .B \-\-snmp
- Enable the SNMP trap handler.
- .B openipmish
-diff --git a/man/rmcp_ping.1 b/man/rmcp_ping.1
-index d60019a..ce5cab0 100644
--- a/man/rmcp_ping.1
-+++ b/man/rmcp_ping.1
-@@ -38,7 +38,7 @@ starttag.  This is zero by default
- Turns on debugging to standard output.
- .TP
- .I destination
-The target address, default is the boradcast address (default 255.255.255.255)
-+The target address, default is the broadcast address (default 255.255.255.255)
- 
- .SH AUTHOR
- .PP
-diff --git a/man/solterm.1 b/man/solterm.1
-index 1479a1b..ada15d8 100644
--- a/man/solterm.1
-+++ b/man/solterm.1
-@@ -37,9 +37,9 @@ These are all described in openipmi_conparms (7)
- .TP
- .BI \-e\  escape_char
- The character to use to escape, or exit, the program.  Entering this
-chatacter right after a newline is entered causes the program to go
-+character right after a newline is entered causes the program to go
- into command mode.  A single character after this performs a command.
-The default escape character is "~" as shown below.  Suppported
-+The default escape character is "~" as shown below.  Supported
- commands are:
- .RS
- .IP ~.
-@@ -98,7 +98,7 @@ the SoL session. This is the default.
- .TP
- .BI \-holdoff
- Specifies that CTS, DTR, and DSR are to be deasserted at the start of
-the SoL session so that the configuration may be modifeid before the
-+the SoL session so that the configuration may be modified before the
- handshake is released.
- 
- .TP
-diff --git a/sample/ipmicmd.c b/sample/ipmicmd.c
-index 6cbcdc5..5f5c1ec 100644
--- a/sample/ipmicmd.c
-+++ b/sample/ipmicmd.c
-@@ -124,6 +124,7 @@ void usage(void)
-     printf("%s [-k <command>] [-v] <con_parms>\n", progname);
-     printf("Where <con_parms> is one of:");
-     ipmi_parse_args_iter_help(con_usage, NULL);
-+    printf("\n");
- }
- 
- char *
-diff --git a/sample/rmcp_ping.c b/sample/rmcp_ping.c
-index 7814792..5778fea 100644
--- a/sample/rmcp_ping.c
-+++ b/sample/rmcp_ping.c
-@@ -156,6 +156,11 @@ main(int argc, char *argv[])
- 	if (strcmp(argv[i], "--") == 0) {
- 	    i++;
- 	    break;
-+	} else if ((strcmp(argv[i], "--help") == 0) ||
-+		   (strcmp(argv[i], "-?") == 0) ||
-+		   (strcmp(argv[i], "-h") == 0)) {
-+	    i++;
-+	    usage();
- 	} else if (strcmp(argv[i], "-p") == 0) {
- 	    i++;
- 	    if (i >= argc) {
-diff --git a/sample/solterm.c b/sample/solterm.c
-index 38a3f9d..a3e52de 100644
--- a/sample/solterm.c
-+++ b/sample/solterm.c
-@@ -743,7 +743,12 @@ int main(int argc, char *argv[])
- 
- 	/* Now we make sure "lan" is the first argument so we get the
- 	   right connection type... */
-	if (strcmp(argv[1], "lan") != 0) {
-+	if ((strcmp(argv[1], "-h") == 0) ||
-+	    (strcmp(argv[1], "--help") == 0) ||
-+	    (strcmp(argv[1], "-?") == 0)) {
-+		usage();
-+		exit(1);
-+	} else if (strcmp(argv[1], "lan") != 0) {
- 		fprintf(stderr, "main: %s only supports lan connections\n",
- 			progname);
- 		exit(1);
-diff --git a/ui/basic_ui.c b/ui/basic_ui.c
-index 6993eb2..84889cb 100644
--- a/ui/basic_ui.c
-+++ b/ui/basic_ui.c
-@@ -306,6 +306,26 @@ snmp_init(os_handler_t *os_hnd)
- static void snmp_setup_fds(os_handler_t *os_hnd) { }
- #endif /* HAVE_UCDSNMP */
-     
-+void help(void)
-+{
-+    fprintf(stdout, "ipmi_ui [ options ] smi smi-num\n");
-+    fprintf(stdout, "ipmi_ui [ oprions ] lan IP port [IP2 port2] auth priv user pass\n");
-+    fprintf(stdout, "\n");
-+    fprintf(stdout, "Options:\n");
-+    fprintf(stdout, "    -c       Command line mode\n");
-+    fprintf(stdout, "    -dlock   Lock debugging ON\n");
-+    fprintf(stdout, "    -dmem    Memory debugging ON\n");
-+    fprintf(stdout, "    -drawmsg Raw message ON\n");
-+    fprintf(stdout, "    -dmsg    Dump all messages.\n");
-+#ifdef HAVE_UCDSNMP
-+    fprintf(stdout, "    -snmp    SNMP trap handler ON\n");
-+#endif
-+    fprintf(stdout, "Auth:\n");
-+    fprintf(stdout, "    none | straight | md5 | md2\n");
-+    fprintf(stdout, "Priv:\n");
-+    fprintf(stdout, "    callback | user | operator | admin\n");
-+}
-+
- int
- main(int argc, char *argv[])
- {
-@@ -327,6 +347,11 @@ main(int argc, char *argv[])
- 	curr_arg++;
- 	if (strcmp(arg, "--") == 0) {
- 	    break;
-+	} else if (strcmp(arg, "-?") == 0 ||
-+		   strcmp(arg, "-h") == 0 ||
-+		   strcmp(arg, "--help") == 0) {
-+	   help();
-+	   return(1);
- 	} else if (strcmp(arg, "-c") == 0) {
- 	    full_screen = 0;
- 	} else if (strcmp(arg, "-dlock") == 0) {
-- 
-2.7.4
-
--- a/OpenIPMI-2.0.18-pthread-pkgconfig.patch
+++ b/OpenIPMI-2.0.18-pthread-pkgconfig.patch
@ -0,0 +1,18 @@
+468067  - "pkg-config --libs OpenIPMIpthread" fails
+
+Fix the pkgconfig file.
+
+Reported upstream as http://sourceforge.net/tracker/index.php?func=detail&aid=2188750&group_id=36127&atid=416301
+
+diff -up OpenIPMI-2.0.18/OpenIPMIpthread.pc.in.orig OpenIPMI-2.0.18/OpenIPMIpthread.pc.in
+--- OpenIPMI-2.0.18/OpenIPMIpthread.pc.in.orig	2005-08-17 05:56:02.000000000 +0200
+++ OpenIPMI-2.0.18/OpenIPMIpthread.pc.in	2010-05-20 15:48:07.000000000 +0200
+@@ -6,6 +6,6 @@ includedir=@includedir@
+ Name: OpenIPMIpthread
+ Description: Pthread OS handler for OpenIPMI
+ Version: @VERSION@
+-Requires: OpenIPMI pthread
+Requires: OpenIPMI
+ Libs: -L${libdir} -lOpenIPMIutils -lOpenIPMIpthread
+-Cflags: -I${includedir}
+Cflags: -I${includedir} -pthread
--- a/OpenIPMI-py313compat.patch
+++ b/OpenIPMI-py313compat.patch
@ -1,13 +0,0 @@
-diff --git a/swig/python/OpenIPMI_lang.i b/swig/python/OpenIPMI_lang.i
-index 67221fd..d150d81 100644
--- a/swig/python/OpenIPMI_lang.i
-+++ b/swig/python/OpenIPMI_lang.i
-@@ -541,7 +541,7 @@ static void OI_put_py_state(int current)
- #else
- static void init_lang(void)
- {
-    PyEval_InitThreads();
-+    /* nothing */
- }
- #define OI_PY_STATE PyGILState_STATE
- #define OI_PY_STATE_GET() PyGILState_Ensure()
--- a/OpenIPMI.spec
+++ b/OpenIPMI.spec
@ -1,47 +1,26 @@
-%global _hardened_build 1
-
-%bcond_with python
-%bcond_with perl
+# TODO: uses private copy of libedit, should be modified to use system one

+%{!?python_sitearch: %define python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")}
 Summary: IPMI (Intelligent Platform Management Interface) library and tools
 Name: OpenIPMI
+Version: 2.0.18
+Release: 4%{?dist}
+License: LGPLv2+ and GPLv2+ or BSD
+Group: System Environment/Base
+URL: http://sourceforge.net/projects/openipmi/
+Source: http://downloads.sourceforge.net/openipmi/%{name}-%{version}.tar.gz
+Source1: openipmi.sysconf
+Source2: openipmi.initscript
+Source3: openipmigui.desktop
+Source4: README.initscript
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+BuildRequires: gdbm-devel swig glib2-devel net-snmp-devel ncurses-devel
+BuildRequires: openssl-devel python-devel perl-devel tcl-devel tkinter
+BuildRequires: desktop-file-utils
+Requires(post): chkconfig
+Requires(preun): chkconfig

-Version:    2.0.36
-Release:    5%{?dist}
-License:    LGPL-2.1-or-later and GPL-2.0-or-later or BSD-3-Clause
-URL:        https://sourceforge.net/projects/openipmi/
-Source:     https://downloads.sourceforge.net/openipmi/%{name}-%{version}.tar.gz
-Source1:    openipmi.sysconf
-Source2:    openipmi-helper
-Source3:    ipmi.service
-Patch1:     0001-man.patch
-Patch2:     include-config-h-cmdlang.patch
-Patch5:     OpenIPMI-py313compat.patch
-
-BuildRequires: make
-BuildRequires:    gdbm-devel glib2-devel net-snmp-devel ncurses-devel
-%if %{with python} || %{with perl}
-BuildRequires:    swig
-%endif
-BuildRequires:    openssl-devel
-%if %{with python}
-BuildRequires:    python3-devel
-%endif
-%if %{with perl}
-BuildRequires:    perl-devel perl-generators
-%endif
-BuildRequires:    pkgconfig
-BuildRequires:    readline-devel
-BuildRequires:    automake
-BuildRequires:    autoconf
-BuildRequires:    libtool
-%{?systemd_requires}
-BuildRequires:    systemd
-
-Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
-
-# Prevent bogus provides of private libs from perl
-%global __provides_exclude_from %{?__provides_exclude_from:%{__provides_exclude_from}|}^%{perl_vendorarch}/auto/.*\\.so$
+Patch1: OpenIPMI-2.0.18-pthread-pkgconfig.patch

 %description
 The Open IPMI project aims to develop an open code base to allow access to
@ -49,542 +28,145 @@ platform information using Intelligent Platform Management Interface (IPMI).
 This package contains the tools of the OpenIPMI project.

 %package libs
+Group: Development/Libraries
 Summary: The OpenIPMI runtime libraries

 %description libs
 The OpenIPMI-libs package contains the runtime libraries for shared binaries
 and applications.

-%if %{with perl}
 %package perl
-Summary:  IPMI Perl language bindings
-Requires: %{name}-libs%{?_isa} = %{version}-%{release}
+Group: Development/Libraries
+Summary: IPMI Perl language bindings
+Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))

 %description perl
 The OpenIPMI-perl package contains the Perl language bindings for OpenIPMI.
-%endif

-%if %{with python}
-%package -n python3-openipmi
-%{?python_provide:%python_provide python3-openipmi}
-%{?python_provide:%python_provide python3-OpenIPMI}
-# Remove before F30
-Provides:  %{name}-python = %{version}-%{release}
-Provides:  %{name}-python%{?_isa} = %{version}-%{release}
-Obsoletes: %{name}-python2 < %{version}-%{release}
-Summary:   IPMI Python language bindings
-Requires:  %{name}-libs%{?_isa} = %{version}-%{release}
+%package python
+Group: Development/Libraries
+Summary: IPMI Python language bindings

-%description -n python3-openipmi
+%description python
 The OpenIPMI-python package contains the Python language bindings for OpenIPMI.
-%endif

 %package devel
-Summary:  The development environment for the OpenIPMI project
+Group: Development/Libraries
+Summary: The development environment for the OpenIPMI project
 Requires: pkgconfig
-Requires: %{name}%{?_isa} = %{version}-%{release}
-Requires: %{name}-libs%{?_isa} = %{version}-%{release}
-Requires: %{name}-lanserv%{?_isa} = %{version}-%{release}
+Requires: %{name} = %{version}-%{release}

 %description devel
 The OpenIPMI-devel package contains the development libraries and header files
 of the OpenIPMI project.

-%package lanserv
-Summary:  Emulates an IPMI network listener
-Requires: %{name}%{?_isa} = %{version}-%{release}
-Requires: %{name}-libs%{?_isa} = %{version}-%{release}
+%package gui
+Group: System Environment/Base
+Summary: IPMI graphical user interface tool
+Requires: tix tkinter %{name}-python = %{version}-%{release}

-%description lanserv
-This package contains a network IPMI listener.
+%description gui
+The OpenIPMI-gui package contains the graphical user interface to monitor
+and control IPMI-enabled devices.


 %prep
-%autosetup -p1
+%setup -q
+%patch1 -p1

 %build
-
-%configure \
-    CFLAGS="-fPIC %{optflags} -z now -fno-strict-aliasing" \
-    LDFLAGS="%{__global_ldflags} -Wl,--as-needed" \
-    --disable-dependency-tracking \
-    --disable-static \
-%if %{with python}
-    --with-pythoninstall=%{python3_sitearch} \
-    --with-python=%{__python3} \
-%else
-    --with-python=no \
-%endif
-%if %{without perl}
-    --with-perl=no \
-%endif
-    --with-tcl=no \
-    --with-tkinter=no
-
-# https://fedoraproject.org/wiki/Packaging:Guidelines?rd=Packaging/Guidelines#Beware_of_Rpath
-# get rid of rpath still present in OpenIPMI-perl package
+export CFLAGS="-fPIC $RPM_OPT_FLAGS"
+%configure --with-pythoninstall=%{python_sitearch} --disable-dependency-tracking --with-tcl=no --disable-static
+# get rid of rpath
 sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool
 sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool

-make   # not %%{?_smp_mflags} safe
+make   # not %{?_smp_mflags} safe

 %install
-make install DESTDIR=%{buildroot}
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+rm -rf $RPM_BUILD_ROOT/%{_libdir}/*.la

-install -d %{buildroot}{%{_sysconfdir}/sysconfig,%{_unitdir},%{_libexecdir}}
-install -m 644 %SOURCE1 %{buildroot}%{_sysconfdir}/sysconfig/ipmi
-install -m 755 %SOURCE2 %{buildroot}%{_libexecdir}/openipmi-helper
-install -m 644 %SOURCE3 %{buildroot}%{_unitdir}/ipmi.service
-install -d %{buildroot}%{_sysconfdir}/modprobe.d
+install -d ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig
+install -m 644 %SOURCE1 ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig/ipmi
+install -d ${RPM_BUILD_ROOT}%{_initrddir}
+install -m 755 %SOURCE2 ${RPM_BUILD_ROOT}%{_initrddir}/ipmi

-rm %{buildroot}/%{_mandir}/man1/openipmigui.1 %{buildroot}%{_libdir}/*.la
+desktop-file-install --vendor="fedora" --dir=${RPM_BUILD_ROOT}%{_datadir}/applications %{SOURCE3}

-# add missing documentation 
-echo ".so man1/openipmicmd.1" > %{buildroot}%{_mandir}/man1/ipmicmd.1
-
-echo ".so man1/openipmish.1" > %{buildroot}%{_mandir}/man1/ipmish.1
+install -m 644 %SOURCE4 .

 %post
-%systemd_post ipmi.service
+/sbin/chkconfig --add ipmi

 %preun
-%systemd_preun ipmi.service
+if [ $1 = 0 ]; then
+   service ipmi stop >/dev/null 2>&1
+   /sbin/chkconfig --del ipmi
+fi

 %postun
-%systemd_postun_with_restart ipmi.service
+if [ "$1" -ge "1" ]; then
+    service ipmi condrestart >/dev/null 2>&1 || :
+fi

-%ldconfig_scriptlets libs
-%ldconfig_scriptlets lanserv
+%post libs -p /sbin/ldconfig

-### A sysv => systemd migration contains all of the same scriptlets as a
-### systemd package.  These are additional scriptlets
+%postun libs -p /sbin/ldconfig

-%triggerun -- OpenIPMI < 2.0.18-14
-# Save the current service runlevel info
-# User must manually run systemd-sysv-convert --apply httpd
-# to migrate them to systemd targets
-/usr/bin/systemd-sysv-convert --save ipmi >/dev/null 2>&1 ||:
-/bin/systemctl --no-reload enable ipmi.service >/dev/null 2>&1 ||:
-# Run these because the SysV package being removed won't do them
-/sbin/chkconfig --del ipmi >/dev/null 2>&1 || :
-/bin/systemctl try-restart ipmi.service >/dev/null 2>&1 || :
+%clean
+rm -rf $RPM_BUILD_ROOT

 %files
-%license COPYING COPYING.BSD COPYING.LIB
-%doc CONFIGURING_FOR_LAN FAQ README README.Force README.MotorolaMXP
+%defattr(-,root,root)
+%doc CONFIGURING_FOR_LAN COPYING COPYING.BSD COPYING.LIB FAQ README README.Force README.MotorolaMXP README.initscript
 %config(noreplace) %{_sysconfdir}/sysconfig/ipmi
-%{_libexecdir}/openipmi-helper
+%{_initrddir}/ipmi
 %{_bindir}/ipmicmd
+%{_bindir}/ipmilan
 %{_bindir}/ipmish
 %{_bindir}/ipmi_ui
 %{_bindir}/openipmicmd
 %{_bindir}/openipmish
 %{_bindir}/rmcp_ping
 %{_bindir}/solterm
-%{_bindir}/openipmi_eventd
-%{_unitdir}/ipmi.service
 %{_mandir}/man1/ipmi_ui*
 %{_mandir}/man1/openipmicmd*
 %{_mandir}/man1/openipmish*
 %{_mandir}/man1/rmcp_ping*
 %{_mandir}/man1/solterm*
-%{_mandir}/man1/ipmish*
-%{_mandir}/man1/ipmicmd*
-%{_mandir}/man1/openipmi_eventd*
 %{_mandir}/man7/ipmi_cmdlang*
 %{_mandir}/man7/openipmi_conparms*
+%{_mandir}/man8/ipmilan*

-%if %{with perl}
 %files perl
+%defattr(-,root,root)
 %attr(644,root,root) %{perl_vendorarch}/OpenIPMI.pm
-%{perl_vendorarch}/auto/OpenIPMI
-%endif
+%{perl_vendorarch}/auto/OpenIPMI/

-%if %{with python}
-%files -n python3-openipmi
-%{python3_sitearch}/*OpenIPMI*
-%{python3_sitearch}/__pycache__/OpenIPMI.*.pyc
-%endif
+%files python
+%defattr(-,root,root)
+%{python_sitearch}/*OpenIPMI*

 %files libs
-%{_libdir}/libOpenIPMI*.so.*
+%defattr(-,root,root)
+%{_libdir}/*.so.*

 %files devel
+%defattr(-,root,root)
 %{_includedir}/OpenIPMI
 %{_libdir}/*.so
 %{_libdir}/pkgconfig/*.pc

-%files lanserv
-%config(noreplace) %{_sysconfdir}/ipmi/ipmisim1.emu
-%config(noreplace) %{_sysconfdir}/ipmi/lan.conf
-%dir %{_sysconfdir}/ipmi
-%{_bindir}/ipmilan
-%{_bindir}/ipmi_sim
-%{_bindir}/sdrcomp
-%{_libdir}/libIPMIlanserv.so.*
-%{_mandir}/man8/ipmilan.8*
-%{_mandir}/man1/ipmi_sim.1*
-%{_mandir}/man5/ipmi_lan.5*
-%{_mandir}/man5/ipmi_sim_cmd.5*
+%files gui
+%defattr(-,root,root)
+%{_bindir}/openipmigui
+%{_mandir}/man1/openipmigui*
+%{python_sitearch}/openipmigui
+%{_datadir}/applications/fedora-openipmigui.desktop

 %changelog
-* Fri Jan 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.36-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
-
-* Mon Jan 12 2026 Josef Ridky <jridky@redhat.com> - 2.0.36-4
- rebuild for new net-snmp release
-
-* Wed Jul 23 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.36-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Thu Jan 16 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.36-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
-
-* Thu Aug 22 2024 Fedora Release Monitoring <release-monitoring@fedoraproject.org> - 2.0.36-1
- Update to 2.0.36 (#2302353)
- Resolves CVE-2024-42934
-
-* Wed Jul 17 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.35-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Tue May  7 2024 Pavel Cahyna <pcahyna@redhat.com> - 2.0.35-1
- Switch to https
- Update to 2.0.35 (rhbz#2278007)
-  drop patch integrated upstream
-
-* Sun Feb 11 2024 Pavel Cahyna <pcahyna@redhat.com> - 2.0.34-1
- Update to 2.0.34 (rhbz#2105023)
- Resolve issues found by rpmdiff
-  - add a patch to fix getaddrinfo detection to avoid using gethostbyname
-  - add explicit Requires: on subpackages to avoid the need to test
-    interoperability between the various combinations of old and new
-    subpackages
- Conditional Perl & Python module build, by default disabled
-
-* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-12
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Mon Jan 08 2024 Florian Weimer <fweimer@redhat.com> - 2.0.32-11
- Fix C compatibility issues
-
-* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Tue Jul 18 2023 Josef Ridky <jridky@redhat.com> - 2.0.32-9
- Migrate to SPDX license format
-
-* Tue Jul 11 2023 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.32-8
- Perl 5.38 rebuild
-
-* Tue Jun 13 2023 Python Maint <python-maint@redhat.com> - 2.0.32-7
- Rebuilt for Python 3.12
-
-* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
-* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
-
-* Mon Jun 13 2022 Python Maint <python-maint@redhat.com> - 2.0.32-4
- Rebuilt for Python 3.11
-
-* Tue May 31 2022 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.32-3
- Perl 5.36 rebuild
-
-* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.32-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
-
-* Mon Jan 10 2022 Josef Ridky <jridky@redhat.com> - 2.0.32-1
- new upstream release 2.0.32 (#2020717)
-
-* Tue Sep 14 2021 Sahana Prasad <sahana@redhat.com> - 2.0.31-8
- Rebuilt with OpenSSL 3.0.0
-
-* Mon Aug 02 2021 Josef Ridky <jridky@redhat.com> - 2.0.31-7
- replace distutils and fix FTBFS (#1948437)
- fix collectd-ipmi crash (#1927022)
-
-* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.31-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
-
-* Fri Jun 04 2021 Python Maint <python-maint@redhat.com> - 2.0.31-5
- Rebuilt for Python 3.10
-
-* Fri May 21 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.31-4
- Perl 5.34 rebuild
-
-* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.0.31-3
- Rebuilt for updated systemd-rpm-macros
-  See https://pagure.io/fesco/issue/2583.
-
-* Mon Jan 25 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.31-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
-
-* Mon Jan 25 2021 Josef Ridky <jridky@redhat.com> - 2.0.31-1
- New upstream release 2.0.31 (#1905768)
-
-* Thu Sep 17 2020 Josef Řídký <jridky@redhat.com> - 2.0.29-1
- New upstream release 2.0.29 (#1846675)
-
-* Thu Aug 27 2020 Josef Řídký <jridky@redhat.com> - 2.0.28-7
- Rebuilt for new net-snmp release
-
-* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Tue Jun 23 2020 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.28-5
- Perl 5.32 rebuild
-
-* Tue May 26 2020 Miro Hrončok <mhroncok@redhat.com> - 2.0.28-4
- Rebuilt for Python 3.9
-
-* Mon Feb 03 2020 Vaclav Dolezal <vdolezal@redhat.com> - 2.0.28-3
- Cleanup of openipmi-helper script; removed no-udev branch (#1579773)
-
-* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
-
-* Mon Dec 16 2019 Vaclav Dolezal <vdolezal@redhat.com> - 2.0.28-1
- New upstream release 2.0.28
-
-* Thu Oct 03 2019 Miro Hrončok <mhroncok@redhat.com> - 2.0.27-5
- Rebuilt for Python 3.8.0rc1 (#1748018)
-
-* Mon Aug 19 2019 Miro Hrončok <mhroncok@redhat.com> - 2.0.27-4
- Rebuilt for Python 3.8
-
-* Thu Aug 01 2019 Vaclav Dolezal <vdolezal@redhat.com> - 2.0.27-3
- Prevent bogus Provides of libOpenIPMI.so.0 by OpenIPMI-perl (#1734407)
-
-* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.27-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
-
-* Wed Jun 26 2019 Vaclav Dolezal <vdolezal@redhat.com> - 2.0.27-1
- New upstream release 2.0.27
-
-* Fri May 31 2019 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.25-10
- Perl 5.30 rebuild
-
-* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.25-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
-
-* Wed Sep 05 2018 Josef Ridky <jridky@redhat.com> - 2.0.25-8
- Fix man page self referencing error (#1612159)
-
-* Tue Jul 24 2018 Adam Williamson <awilliam@redhat.com> - 2.0.25-7
- Rebuild for new net-snmp
-
-* Thu Jul 12 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.25-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
-
-* Tue Jul 03 2018 Petr Pisar <ppisar@redhat.com> - 2.0.25-5
- Perl 5.28 rebuild
-
-* Fri Jun 29 2018 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.25-4
- Perl 5.28 rebuild
-
-* Tue Jun 19 2018 Miro Hrončok <mhroncok@redhat.com> - 2.0.25-3
- Rebuilt for Python 3.7
-
-* Wed Apr 18 2018 Josef Ridky <jridky@redhat.com> - 2.0.25-2
- Python3 update
-
-* Tue Apr 17 2018 Josef Ridky <jridky@redhat.com> - 2.0.25-1
- New upstream release 2.0.25 (#1568194)
- Replace Python2 with Python3
- Drop OpenIPMI-python2 and set it as Obsolete
- Introduce new OpenIPMI-python3 package
-
-* Tue Mar 06 2018 Josef Ridky <jridky@redhat.com> - 2.0.24-5
- use ldconfig macros
- 
-* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.24-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
-
-* Mon Jan 22 2018 Josef Ridky <jridky@redhat.com> -2.0.14-3
- remove old systemd dependencies
-
-* Mon Jan 22 2018 Josef Ridky <jridky@redhat.com> -2.0.14-2
- restore removed requirements
-
-* Thu Jan 18 2018 Tomasz Kłoczko <kloczek@fedoraproject.org> - 2.0.24-1
- remove pkgconfig from devel Requires
- remove libedit Requires (it is autogenerated as SONAME dependency)
- remove main package dependecy fron devell Requires (only libs is needed
- add use %%{?_isa} macro in Requires
-
-* Wed Jan 17 2018 Josef Ridky <jridky@redhat.com> - 2.0.24-1
- New upstream release 2.0.24
- spec update (based on Tomasz Kłoczko's pull request)
- reduce the number of SONAME dependencies by use -Wl,--as-needed in LDFLAGS
- change COPYING COPYING.BSD COPYING.LIB files as %%license
- add %%{_sysconfdir}/ipmi directory to lanserv %%files list
- execute /sbin/ldconfig in %%post and %%postun section for lanserv sub-packages
- remove desktop-file-utils and GUI related packages from BuildRequires
- use roff links instead symlinks to gzipped man pages
- use %%autosetup in %%prep
- remove Group tags
-
-* Thu Oct 19 2017 Josef Ridky <jridky@redhat.com> - 2.0.23-6
- Rebuilt for python2 package
-
-* Sun Aug 20 2017 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.0.23-5
- Add Provides for the old name without %%_isa
-
-* Sat Aug 19 2017 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.0.23-4
- Python 2 binary package renamed to python2-openipmi
-  See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3
-
-* Wed Aug 02 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.23-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
-
-* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.23-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
-
-* Thu Jun 15 2017 Josef Ridky <jridky@redhat.com> - 2.0.23-1
- New upstream release 2.0.23 (#1461606)
-
-* Sun Jun 04 2017 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.22-6
- Perl 5.26 rebuild
-
-* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.22-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
-
-* Mon Oct 17 2016 Josef Ridky <jridky@redhat.com> - 2.0.22-4
- Add support for openssl-1.1.0 library (#1383995)
-
-* Tue Jul 19 2016 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.22-3
- https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages
-
-* Fri Jul 15 2016 Boris Ranto <branto@redhat.com> - 0:2.0.22-2
- Rebuild for glibc hack
-
-* Thu Jun 02 2016 Boris Ranto <branto@redhat.com> - 0:2.0.22-1
- New version (0:2.0.22-1)
- Apply 'OpenIPMI-2.0.18-pthread-pkgconfig.patch'
- Apply './OpenIPMI-2.0.19-man.patch'
- Apply 'OpenIPMI-2.0.21-nobundle.patch'
-
-* Tue May 17 2016 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.21-13
- Perl 5.24 rebuild
-
-* Wed Feb 03 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.21-12
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
-
-* Wed Dec 09 2015 Boris Ranto <branto@redhat.com> - 2.0.21-11
- Avoid warning on update/removal (#1256798)
-
-* Tue Nov 24 2015 Boris Ranto <branto@redhat.com> - 2.0.21-10
- Remove duplicities in filelists
-
-* Tue Jun 16 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.21-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
-
-* Fri Jun 05 2015 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.21-8
- Perl 5.22 rebuild
-
-* Wed Apr 22 2015 Ales Ledvinka <aledvink@redhat.com> - 2.0.21-7
- Remove modalias subpackage.
-
-* Tue Aug 26 2014 Jitka Plesnikova <jplesnik@redhat.com> - 2.0.21-6
- Perl 5.20 rebuild
-
-* Fri Aug 15 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.21-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
-
-* Tue Aug 12 2014 Ledvinka Ales <aledvink@redhat.com> - 2.0.21-4
- Use system libedit instead of the old one bundled with source.
-
-* Fri Jun 06 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.21-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
-
-* Tue May 13 2014 Jaromir Capik <jcapik@redhat.com> - 2.0.21-2
- Fixing FTBFS due to unpackaged files (#1075696)
-
-* Wed Jan 29 2014 Ledvinka Ales <aledvink@redhat.com> - 2.0.21-1
- Update to new upstream (fixed case 2nd) release.
-
-* Tue Jan 14 2014 Ledvinka Ales <aledvink@redhat.com> - 2.0.19-11
- Probe modules on installation. Do not wait until reboot.
-
-* Wed Nov 13 2013 Ledvinka Ales <aledvink@redhat.com> - 2.0.19-10
- Correct aliases matching module strings.
-
-* Tue Nov 05 2013 Fedora Release Engineering <aledvink@redhat.com> - 2.0.19-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
-
-* Fri Aug 02 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.19-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
-
-* Fri Jul 19 2013 Ledvinka Ales <aledvink@redhat.com> - 2.0.19-7
- Hint compilation to avoid strict aliasing and prevent type-punned pointer issues.
- Fix rPath regression for OpenIPMI-perl library.
-
-* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 2.0.19-6
- Perl 5.18 rebuild
-
-* Tue Jun  4 2013 Ledvinka Ales <aledvink@redhat.com> - 2.0.19-5
- Support aarch64 by replicating release toolchain.
- Configuration subpackage with kernel probed wildcard module aliases.
-  as workaround for bz#961878 and fesco#1110
- Man pages symlinks same as bin symlinks.
- ipmi_ui command help argument.
- ipmilan missing options.
- Fixed build requirements.
-
-* Thu Apr 25 2013 Ledvinka Ales <aledvink@redhat.com> - 2.0.19-4
- rpmdiff fixes
-
-* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.19-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
-
-* Mon Aug 27 2012 Jan Safranek <jsafrane@redhat.com> - 2.0.19-2
- Updated RPM scriptlets with latest systemd-rpm macros (#850246)
- Fixed fedora-review tool complaints
-
-* Wed Aug  8 2012 Jan Safranek <jsafrane@redhat.com> - 2.0.19-1
- Update to 2.0.19
-
-* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.18-16
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
-
-* Mon Jun 11 2012 Petr Pisar <ppisar@redhat.com> - 2.0.18-15
- Perl 5.16 rebuild
-
-* Mon May  7 2012 Jan Safranek <jsafrane@redhat.com> - 2.0.18-14
- Added ipmi systemd unit
-
-* Thu Jan 12 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.18-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
-
-* Thu Jul 21 2011 Petr Sabata <contyk@redhat.com> - 2.0.18-12
- Perl mass rebuild
-
-* Wed Jul 20 2011 Petr Sabata <contyk@redhat.com> - 2.0.18-11
- Perl mass rebuild
-
-* Fri Jul  8 2011 Jan Safranek <jsafrane@redhat.com> - 2.0.18-10
- Rebuilt for new Net-SNMP
-
-* Fri Jun 17 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2.0.18-9
- Perl mass rebuild
-
-* Fri Jun 10 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2.0.18-8
- Perl 5.14 mass rebuild
-
-* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.18-7
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
-
-* Mon Nov  1 2010 Jan Safranek <jsafrane@redhat.com> - 2.0.18-6
- Removed the openipmigui tool, it does not work with TCL without thread
-  support (#646184)
-
-* Tue Oct 26 2010 Jan Safranek <jsafrane@redhat.com> - 2.0.18-5
- Rebuilt for new Net-SNMP
-
 * Wed Jul 21 2010 David Malcolm <dmalcolm@redhat.com> - 2.0.18-4
 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild

--- a/README.initscript
+++ b/README.initscript
@ -0,0 +1,2 @@
+Please note that the /etc/init.d/ipmi init script is not LSB compliant and
+uses non-standard exit codes. See the init script for detailed description.
--- a/include-config-h-cmdlang.patch
+++ b/include-config-h-cmdlang.patch
@ -1,12 +0,0 @@
-diff -up OpenIPMI-2.0.32/cmdlang/cmdlang.c~ OpenIPMI-2.0.32/cmdlang/cmdlang.c
--- OpenIPMI-2.0.32/cmdlang/cmdlang.c~	2021-01-22 19:51:28.000000000 +0100
-+++ OpenIPMI-2.0.32/cmdlang/cmdlang.c	2022-01-28 11:55:42.375470392 +0100
-@@ -32,6 +32,8 @@
-  */
- 
- 
-+#include <config.h>
-+
- #include <errno.h>
- #include <string.h>
- #include <ctype.h>
--- a/ipmi.service
+++ b/ipmi.service
@ -1,12 +0,0 @@
-[Unit]
-Description=IPMI Driver
-After=network.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/libexec/openipmi-helper start
-ExecStop=/usr/libexec/openipmi-helper stop
-
-[Install]
-WantedBy=multi-user.target
--- a/openipmi.initscript
+++ b/openipmi.initscript
@ -1,15 +1,24 @@
 #!/bin/sh
 #############################################################################
 #
-# ipmi:		OpenIPMI Driver helper script
+# ipmi:		OpenIPMI Driver init script
 #
-# Authors:	Jan Safranek <jsafrane@redhat.com>
-# 		Václav Doležal <vdolezal@redhat.com>
-#
-# Based on IPMI init script by:
-#               Matt Domsch <Matt_Domsch@dell.com>
+# Authors:	Matt Domsch <Matt_Domsch@dell.com>
 #               Chris Poblete <Chris_Poblete@dell.com>
 #
+# chkconfig: - 13 87
+# description: OpenIPMI Driver init script
+#
+### BEGIN INIT INFO
+# Provides: ipmidrv
+# Required-Start: $local_fs $remote_fs $syslog
+# Required-Stop: $local_fs $remote_fs $syslog
+# Default-Start:
+# Default-Stop:
+# Short-Description: OpenIPMI Driver init script
+# Description: OpenIPMI Driver init script
+### END INIT INFO
+#
 # Status return code bits
 # no bits set = no errors
 # bit 0 set = minimum modules aren't loaded
@ -19,6 +28,54 @@
 # bit 4 set = lockfile doesn't exist
 # bit 5 set = modules are loaded even when asked to be unloaded

+#
+#############################################################################
+# for log_success_msg and friends
+if [ -r /lib/lsb/init-functions ]; then
+# LSB, SLES, ...
+    . /lib/lsb/init-functions
+elif [ -r /etc/init.d/functions ]; then
+# Red Hat / VMware
+    . /etc/init.d/functions
+    my_log_message()
+    {
+	ACTION=$1
+	shift
+	
+	case "$ACTION" in
+	    success)
+		echo -n $*
+		success "$*"
+		echo
+		;;
+	    failure)
+		echo -n $*
+		failure "$*"
+		echo
+		;;
+	    warning)
+		echo -n $*
+		warning "$*"
+		echo
+		;;
+	    *)
+		;;
+	esac
+    }
+    log_success_msg()
+    {
+	my_log_message success "$*"
+    }
+    log_failure_msg()
+    {
+	my_log_message failure "$*"
+    }
+    log_warning_msg()
+    {
+	my_log_message warning "$*"
+    }
+fi
+
 CONFIGFILE=/etc/sysconfig/ipmi
 # source config info
 [ -r ${CONFIGFILE} ] && . ${CONFIGFILE}
@ -31,6 +88,11 @@ INTF_NUM=0

 IPMI_SMB_MODULE_NAME="ipmi_smb"
 IPMI_SI_MODULE_NAME="ipmi_si"
+kernel=`uname -r | cut -d. -f1-2`
+if [ "${kernel}" == "2.4" ]; then
+    IPMI_SMB_MODULE_NAME="ipmi_smb_intf"
+    IPMI_SI_MODULE_NAME="ipmi_si_drv"
+fi

 MODULES_INTERFACES=""
 [ "${DEV_IPMI}" = "yes" ] && MODULES_INTERFACES="${MODULES_INTERFACES} ipmi_devintf"
@ -51,6 +113,17 @@ RETVAL=0
 LOCKFILE=/var/lock/subsys/ipmi
 DEV_IPMI_TIMEOUT=150

+UDEV_EXISTS=0
+if [ -e /sbin/udev -o -e /sbin/udevd ]; then
+    UDEV_EXISTS=1
+fi
+
+#############################################################################
+# NOTES:
+# * /dev/ipmi0 is unconditionally deleted here on ipmi_devintf unload,
+#   because SLES9 and RHEL4 kernels don't send a message for udev to delete
+#   it for us.
+# 
 #############################################################################

 modules_loaded_verbose()
@ -58,7 +131,7 @@ modules_loaded_verbose()
 	OnePlusLoaded=0
 	OnePlusUnloaded=0
 	for m in $@; do
-		if /sbin/lsmod | grep -q $m ; then
+		if /sbin/lsmod | grep $m >/dev/null 2>&1 ; then
 			echo "$m module loaded."
 			OnePlusLoaded=1
 		else
@ -73,7 +146,7 @@ modules_loaded()
 	OnePlusLoaded=0
 	OnePlusUnloaded=0
 	for m in $@; do
-		if /sbin/lsmod | grep -q $m ; then
+		if /sbin/lsmod | grep $m >/dev/null 2>&1 ; then
 			OnePlusLoaded=1
 		else
 			OnePlusUnloaded=1
@ -137,33 +210,49 @@ start_watchdog_common()
 	modules_loaded ipmi_watchdog
 	[ ${OnePlusUnloaded} -ne 0 ] &&
 		RETVAL=$((RETVAL | 2)) &&
-		echo "Watchdog startup failed: cannot load ipmi_watchdog module" &&
+		log_failure_msg &&
 		return
+	if [ ${UDEV_EXISTS} -eq 0 -a ! -e /dev/watchdog ]; then
+		mknod -m 0600 /dev/watchdog c 10 130
+		[ $? -ne 0 ] &&
+			RETVAL=$((RETVAL | 8)) &&
+			log_failure_msg &&
+			return
+	fi
+	log_success_msg
 }

 start_watchdog_quiet()
 {
 	[ "${IPMI_WATCHDOG}" != "yes" ] &&
 		return
+	echo -n $"Starting ipmi_watchdog driver: "
 	start_watchdog_common
 }

 start_watchdog()
 {
+	echo -n $"Starting ipmi_watchdog driver: "
 	[ "${IPMI_WATCHDOG}" != "yes" ] &&
 		RETVAL=$((RETVAL | 2)) &&
-		echo "Watchdog not configured" &&
+		log_failure_msg "not configured" &&
 		return
 	start_watchdog_common
 }

 stop_watchdog()
 {
+	echo -n $"Stopping ipmi_watchdog driver: "
 	modprobe -q -r ipmi_watchdog > /dev/null 2>&1
 	modules_loaded ipmi_watchdog
 	if [ ${OnePlusLoaded} -ne 0 ]; then
 	    RETVAL=$((RETVAL | 32))
-	    echo "Watchog shutdown failed: cannot unload ipmi_watchdog module"
+	    log_failure_msg
+	else
+	    if [ "${IPMI_WATCHDOG}" = "yes" ]; then
+		[ ${UDEV_EXISTS} -eq 0 ] && rm -f /dev/watchdog
+	    fi
+	    log_success_msg
 	fi
 }

@ -173,6 +262,10 @@ stop_watchdog_quiet()
 	modules_loaded ipmi_watchdog
 	if [ ${OnePlusLoaded} -ne 0 ]; then
 	    RETVAL=$((RETVAL | 32))
+	else
+	    if [ "${IPMI_WATCHDOG}" = "yes" ]; then
+		[ ${UDEV_EXISTS} -eq 0 ] && rm -f /dev/watchdog
+	    fi
 	fi
 }

@ -181,42 +274,48 @@ start_powercontrol_common()
 	local poweroff_opts=""
 	load_hw_modules
 	if [ "${IPMI_POWERCYCLE}" == "yes" ]; then
-	    modinfo ipmi_poweroff 2>/dev/null | grep -q poweroff_control && \
+	    modinfo ipmi_poweroff 2>/dev/null | grep poweroff_control > /dev/null 2>&1 && \
 		poweroff_opts="poweroff_control=2"
-	    modinfo ipmi_poweroff 2>/dev/null | grep -q poweroff_powercycle && \
+	    modinfo ipmi_poweroff 2>/dev/null | grep poweroff_powercycle > /dev/null 2>&1 && \
 		poweroff_opts="poweroff_powercycle=1"
 	fi
 	modprobe ipmi_poweroff "${poweroff_opts}" > /dev/null 2>&1
 	modules_loaded ipmi_poweroff
 	[ ${OnePlusUnloaded} -ne 0 ] &&
 		RETVAL=$((RETVAL | 2)) &&
-		echo "Powercontroll startup failed: cannot load ipmi_poweroff module" &&
+		log_failure_msg &&
 		return
+	log_success_msg
 }

 start_powercontrol_quiet()
 {
 	[ "${IPMI_POWEROFF}" != "yes" ] &&
 		return
+	echo -n $"Starting ipmi_poweroff driver: "
 	start_powercontrol_common
 }

 start_powercontrol()
 {
+	echo -n $"Starting ipmi_poweroff driver: "
 	[ "${IPMI_POWEROFF}" != "yes" ] &&
 		RETVAL=$((RETVAL | 2)) &&
-		echo "Powercontroll not configured" &&
+		log_failure_msg "not configured" &&
 		return
 	start_powercontrol_common
 }

 stop_powercontrol()
 {
+	echo -n $"Stopping ipmi_poweroff driver: "
 	modprobe -q -r ipmi_poweroff > /dev/null 2>&1
 	modules_loaded ipmi_poweroff
 	if [ ${OnePlusLoaded} -ne 0 ]; then
 	    RETVAL=$((RETVAL | 32))
-	    echo "Powercontroll shutdown failed: cannot unload ipmi_poweroff module"
+	    log_failure_msg
+	else
+	    log_success_msg
 	fi
 }

@ -235,6 +334,9 @@ unload_all_ipmi_modules()
 	for m in ${MODULES}; do
 		modprobe -q -r ${m} > /dev/null 2>&1
 	done
+        # delete interface node ONLY if ipmi_devintf is unloaded
+        [ `lsmod | grep -c "ipmi_devintf"` -eq 0 ] &&
+	        rm -f "/dev/ipmi${INTF_NUM}"
 }

 unload_ipmi_modules_leave_features()
@ -242,7 +344,10 @@ unload_ipmi_modules_leave_features()
 	for m in ${MODULES_INTERFACES}; do
 		modprobe -q -r ${m} > /dev/null 2>&1
 	done
-	lsmod | grep -Eq "ipmi_(poweroff|watchdog)"
+        # delete interface node ONLY if ipmi_devintf is unloaded
+        [ `lsmod | grep -c "ipmi_devintf"` -eq 0 ] &&
+	        rm -f "/dev/ipmi${INTF_NUM}"
+	lsmod | egrep -q "ipmi_(poweroff|watchdog)" > /dev/null 2>&1
 	if [ "$?" -ne "0" ]; then
 		stop_watchdog_quiet
 		stop_powercontrol_quiet
@ -266,7 +371,14 @@ load_ipmi_modules ()
 		modprobe ipmi_devintf > /dev/null 2>&1
 		modules_loaded ipmi_devintf
 		RETVAL=$((RETVAL & ~2))
+		[ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2))
 		if [ ${OnePlusLoaded} -eq 1 ]; then
+			if [ ${UDEV_EXISTS} -eq 0 ]; then
+				DEVMAJOR=`cat /proc/devices | awk '/ipmidev/{print $1}'`
+				rm -f /dev/ipmi${INTF_NUM}
+				mknod -m 0600 /dev/ipmi${INTF_NUM} c ${DEVMAJOR} 0 || RETVAL=$((RETVAL | 4))
+			fi
+
 			# udev can take several seconds to create /dev/ipmi0, 
 			# but it happens asynchronously, so delay here
 			locdelay=${DEV_IPMI_TIMEOUT}
@ -274,8 +386,6 @@ load_ipmi_modules ()
 				locdelay=$((locdelay - 1))
 				sleep 0.1
 			done
-		else
-			RETVAL=$((RETVAL | 2))
 		fi
 	fi

@ -300,14 +410,15 @@ load_ipmi_modules ()
 #############################################################################
 start()
 {
+	echo -n "Starting ${MODULE_NAME} drivers: "
 	load_ipmi_modules
 	if [ ${RETVAL} -eq 0 ]; then
-		touch ${LOCKFILE}
+		touch ${LOCKFILE} && log_success_msg
 	else
 		if [ $((RETVAL & 1)) -eq 1 ]; then
-			echo "Startup failed."
+			log_failure_msg
 		else
-			touch ${LOCKFILE} && echo "Warning!?"
+			touch ${LOCKFILE} && log_warning_msg
 		fi
 	fi
 	start_watchdog_quiet
@ -317,25 +428,29 @@ start()
 #############################################################################
 stop()
 {
+	echo -n "Stopping ${MODULE_NAME} drivers: "
 	unload_ipmi_modules_leave_features
 	modules_loaded ${MODULES_INTERFACES}
 	if [ ${OnePlusLoaded} -ne 0 ]; then
 		RETVAL=$((RETVAL | 32))
-		echo "Shutdown failed, something may be in use"
+		log_failure_msg "may be in use"
 	else
 		rm -f ${LOCKFILE}
+		log_success_msg
 	fi
 }

 stop_all()
 {
+	echo -n $"Stopping all ${MODULE_NAME} drivers: "
 	unload_all_ipmi_modules
 	modules_loaded ${MODULES}
 	if [ ${OnePlusLoaded} -ne 0 ]; then
 		RETVAL=$((RETVAL | 32))
-		echo "Shutdown failed, something may be in use"
+		log_failure_msg "may be in use"
 	else
 		rm -f ${LOCKFILE}
+		log_success_msg
 	fi
 }

--- a/openipmi.modalias
+++ b/openipmi.modalias
@ -1,10 +0,0 @@
-#
-# This configuration file was provided
-# by OpenIPMI-modalias package.
-# Feel free to update as needed.
-#
-
-alias acpi:IPI000*:* ipmi_si
-alias acpi:IPI000*:* ipmi_devintf
-alias acpi:IPI000*:* ipmi_msghandler
-
--- a/openipmigui.desktop
+++ b/openipmigui.desktop
@ -0,0 +1,7 @@
+[Desktop Entry]
+Name=OpenIPMI GUI
+Comment=Manage local or remote systems using IPMI protocol
+Exec=/usr/bin/openipmigui
+Terminal=false
+Type=Application
+Categories=System;
--- a/2
+++ b/2
@ -1 +1 @@
-SHA512 (OpenIPMI-2.0.36.tar.gz) = a47725308336f200e88a1eb8641ed5ef03fc8bb43ee47f7a99e39df68640ff912b6842c1710d7e767aeb724fc41fa4ed3b244685812ee985e5200003a45f4015
+8392539200fbda670503770292dfbb8f  OpenIPMI-2.0.18.tar.gz