dist-git conversion

#2781)

.cvsignore

@@ -1 +0,0 @@
-alliance-5.0-20070718.tar.gz

.gitignore

@@ -0,0 +1,2 @@
+alliance-5.0-20070718.tar.gz
+alliance-5.0-tutorials.tar.bz2

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: alliance
-# $Id$
-NAME := alliance
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attept a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

alliance-env.patch

@@ -1,131 +1,65 @@
-diff -Naur distrib/etc/alc_env.csh.in etc/alc_env.csh.in
---- distrib/etc/alc_env.csh.in	2006-10-05 12:09:24.000000000 +0200
-+++ etc/alc_env.csh.in	2007-08-18 13:48:55.000000000 +0200
-@@ -1,4 +1,4 @@
--# -*- Mode: Shell-script     -*- 
-+# -*- Mode: Shell-script     -*-
- # -*- vim: set filetype=csh: -*-
- #             ,,,
- #            (o o)
-@@ -28,17 +28,17 @@
-  setenv MBK_OUT_LO           vst
-  setenv MBK_IN_PH            ap
-  setenv MBK_OUT_PH           ap
-- 
-+
-  setenv MBK_WORK_LIB         .
-  setenv MBK_CATAL_NAME       CATAL
-- 
-+
-  setenv MBK_SCALE_X          100
-- 
-+
-  setenv VH_MAXERR            10
-  setenv VH_BEHSFX            vbe
-  setenv VH_PATSFX            pat
-  setenv VH_DLYSFX            dly
-- 
-+
-  setenv MBK_CATA_LIB         ".:${ALLIANCE_TOP}/cells/sxlib"
-  setenv MBK_CATA_LIB         "${MBK_CATA_LIB}:${ALLIANCE_TOP}/cells/dp_sxlib"
-  setenv MBK_CATA_LIB         "${MBK_CATA_LIB}:${ALLIANCE_TOP}/cells/rflib"
-@@ -48,42 +48,29 @@
-  setenv MBK_CATA_LIB         "${MBK_CATA_LIB}:${ALLIANCE_TOP}/cells/pxlib"
-  setenv MBK_CATA_LIB         "${MBK_CATA_LIB}:${ALLIANCE_TOP}/cells/padlib"
-  setenv MBK_TARGET_LIB       "${ALLIANCE_TOP}/cells/sxlib"
-- setenv MBK_C4_LIB           ./cellsC4 
-- 
-+ setenv MBK_C4_LIB           ./cellsC4
-+
-  setenv MBK_VDD              vdd
-  setenv MBK_VSS              vss
-- 
-+
-  setenv XPAT_PARAM_NAME      "${ALLIANCE_TOP}/etc/xpat.par"
-  setenv XFSM_PARAM_NAME      "${ALLIANCE_TOP}/etc/xfsm.par"
-  setenv XSCH_PARAM_NAME      "${ALLIANCE_TOP}/etc/xsch.par"
-- 
-+
-  setenv RDS_IN               cif
-  setenv RDS_OUT              cif
-- 
-+
-  setenv DREAL_TECHNO_NAME    "${ALLIANCE_TOP}/etc/cmos.dreal"
-  setenv GRAAL_TECHNO_NAME    "${ALLIANCE_TOP}/etc/cmos.graal"
-  setenv GENVIEW_TECHNO_NAME  "${ALLIANCE_TOP}/etc/cmos.genview"
-- 
-+
-  setenv RDS_TECHNO_NAME      "${ALLIANCE_TOP}/etc/cmos.rds"
-  setenv ELP_TECHNO_NAME      "${ALLIANCE_TOP}/etc/prol.elp"
- 
- 
+--- distrib/etc/alc_env.csh.in  2006-10-05 12:09:25.000000000 +0200
++++ etc/alc_env.csh.in  2008-05-26 22:37:15.000000000 +0200
+@@ -70,20 +70,23 @@
+
  # System environment variables.
-- if ( $?PATH ) then
+  if ( $?PATH ) then
 -   setenv PATH "${ALLIANCE_TOP}/bin:$PATH"
-- else
--   setenv PATH "${ALLIANCE_TOP}/bin"
-- endif
--
--# Only needed on Solaris (included in /etc/ld.so.conf under Linux).
-- if ( $?LD_LIBRARY_PATH ) then
++   setenv PATH "${PATH}:${ALLIANCE_TOP}/bin"
+  else
+    setenv PATH "${ALLIANCE_TOP}/bin"
+  endif
+
+ # Only needed on Solaris (included in /etc/ld.so.conf under Linux).
+  if ( $?LD_LIBRARY_PATH ) then
 -   setenv LD_LIBRARY_PATH "${ALLIANCE_TOP}/lib:$LD_LIBRARY_PATH"
-- else
--   setenv LD_LIBRARY_PATH "${ALLIANCE_TOP}/lib"
-- endif
--
++   setenv LD_LIBRARY_PATH "${LD_LIBRARY_PATH}:${ALLIANCE_TOP}/lib"
+  else
+    setenv LD_LIBRARY_PATH "${ALLIANCE_TOP}/lib"
+  endif
+
 - if ( $?MANPATH ) then
 -   setenv MANPATH "${ALLIANCE_TOP}/man:${MANPATH}"
-- else
--   setenv MANPATH "${ALLIANCE_TOP}/man"
-- endif
-+  setenv PATH "${PATH}:${ALLIANCE_TOP}/bin"
++ if ($?MANPATH) then
 +  setenv MANPATH "${MANPATH}:${ALLIANCE_TOP}/man"
+  else
+-   setenv MANPATH "${ALLIANCE_TOP}/man"
++  setenv MANPATH ":${ALLIANCE_TOP}/man"
+  endif
 +
 +# fixing *** ERROR *** : Variable MBK_SPI_MODEL not found.
 +  setenv MBK_SPI_MODEL       "${ALLIANCE_TOP}/etc/spimodel.cfg"
-diff -Naur distrib/etc/alc_env.sh.in etc/alc_env.sh.in
---- distrib/etc/alc_env.sh.in	2006-10-05 12:09:24.000000000 +0200
-+++ etc/alc_env.sh.in	2007-08-18 13:47:04.000000000 +0200
-@@ -1,4 +1,4 @@
--# -*- Mode: Shell-script    -*- 
-+# -*- Mode: Shell-script    -*-
- # -*- vim: set filetype=sh: -*-
- #             ,,,
- #            (o o)
-@@ -24,7 +24,7 @@
- 
- # Alliance environment variables.
-            MBK_IN_LO=vst;                            export MBK_IN_LO
--          MBK_OUT_LO=vst;                            export MBK_OUT_LO 
-+          MBK_OUT_LO=vst;                            export MBK_OUT_LO
-            MBK_IN_PH=ap;                             export MBK_IN_PH
-           MBK_OUT_PH=ap;                             export MBK_OUT_PH
- 
-@@ -70,20 +70,8 @@
- 
- 
+--- distrib/etc/alc_env.sh.in   2006-10-05 12:09:25.000000000 +0200
++++ etc/alc_env.sh.in   2008-05-26 22:41:30.000000000 +0200
+@@ -70,20 +70,23 @@
+
+
  # System environment variables.
 - PATH=$ALLIANCE_TOP/bin:$PATH
-- export PATH
-+  export PATH=$PATH:$ALLIANCE_TOP/bin
-+  export MANPATH=$MANPATH:$ALLIANCE_TOP/man
- 
--# Only needed on Solaris (included in /etc/ld.so.conf under Linux).
-- if [ -z "${LD_LIBRARY_PATH}" ]; then
--   LD_LIBRARY_PATH=$ALLIANCE_TOP/lib
-- else
++ PATH=$PATH:$ALLIANCE_TOP/bin
+  export PATH
+
+ # Only needed on Solaris (included in /etc/ld.so.conf under Linux).
+  if [ -z "${LD_LIBRARY_PATH}" ]; then
+    LD_LIBRARY_PATH=$ALLIANCE_TOP/lib
+  else
 -   LD_LIBRARY_PATH=$ALLIANCE_TOP/lib:$LD_LIBRARY_PATH
-- fi
-- export LD_LIBRARY_PATH
--
-- if [ -z "${MANPATH}" ]; then
++   LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ALLIANCE_TOP/lib
+  fi
+  export LD_LIBRARY_PATH
+
+  if [ -z "${MANPATH}" ]; then
 -   MANPATH=$ALLIANCE_TOP/man
-- else
++   MANPATH=:$ALLIANCE_TOP/man
+  else
 -   MANPATH=$ALLIANCE_TOP/man:$MANPATH
-- fi
-- export MANPATH
++   MANPATH=$MANPATH:$ALLIANCE_TOP/man
+  fi
+  export MANPATH
++
 +# fixing *** ERROR *** : Variable MBK_SPI_MODEL not found.
 +  MBK_SPI_MODEL=$ALLIANCE_TOP/etc/spimodel.cfg;      export MBK_SPI_MODEL
+
 diff -Naur distrib/etc/Makefile.am etc/Makefile.am
 --- distrib/etc/Makefile.am	2002-06-25 16:09:38.000000000 +0200
 +++ etc/Makefile.am	2007-08-18 13:58:38.000000000 +0200

alliance-gcc43.patch

@@ -0,0 +1,47 @@
+diff -Nur alliance-5.0.old/nero/src/ADefs.h alliance-5.0/nero/src/ADefs.h
+--- alliance-5.0.old/nero/src/ADefs.h	2002-10-29 19:46:03.000000000 +0100
++++ alliance-5.0/nero/src/ADefs.h	2008-03-19 03:16:12.000000000 +0100
+@@ -138,7 +138,7 @@
+ 
+       // Allocators.
+       private: static void *operator new    (size_t size);
+-      private: static void  operator delete (void *zone);
++      public: static void  operator delete (void *zone);
+       public:  static void *operator new    (size_t size, CNodeASSet &NS);
+ 
+       // Modifiers.
+diff -Nur alliance-5.0.old/nero/src/MDefs.h alliance-5.0/nero/src/MDefs.h
+--- alliance-5.0.old/nero/src/MDefs.h	2005-10-10 17:34:05.000000000 +0200
++++ alliance-5.0/nero/src/MDefs.h	2008-03-19 01:08:24.000000000 +0100
+@@ -25,6 +25,8 @@
+ 
+ 
+ # include  "UDefs.h"
++# include <limits.h>
++# include <string.h>
+ 
+ 
+ 
+diff -Nur alliance-5.0.old/ocp/src/placer/PPlacement.h alliance-5.0/ocp/src/placer/PPlacement.h
+--- alliance-5.0.old/ocp/src/placer/PPlacement.h	2006-03-30 21:07:47.000000000 +0200
++++ alliance-5.0/ocp/src/placer/PPlacement.h	2008-03-19 01:10:41.000000000 +0100
+@@ -43,6 +43,7 @@
+ #include <fstream>
+ #include <vector>
+ #include <map>
++#include <string.h>
+ using namespace std;
+ 
+ #include "mut.h"
+diff -Nur alliance-5.0.old/sea/src/DEF_grammar_lex.l alliance-5.0/sea/src/DEF_grammar_lex.l
+--- alliance-5.0.old/sea/src/DEF_grammar_lex.l	2002-04-25 18:16:20.000000000 +0200
++++ alliance-5.0/sea/src/DEF_grammar_lex.l	2008-03-19 01:11:28.000000000 +0100
+@@ -18,7 +18,7 @@
+ # define    yylineno     DEF_grammarlineno
+ 
+ 
+-          int  yylineno = 1;
++         // int  yylineno = 1;
+ 
+ 
+ static  int  yywrap(void);

alliance-tutorials.patch

@@ -1,690 +0,0 @@
-diff -Naur documentation/tutorials/place_and_route/tex/place_and_route.tex tutorials/place_and_route/tex/place_and_route.tex
---- documentation/tutorials/place_and_route/tex/place_and_route.tex	2004-10-16 14:51:56.000000000 +0200
-+++ tutorials/place_and_route/tex/place_and_route.tex	2007-08-02 18:37:05.000000000 +0200
-@@ -2,6 +2,7 @@
- % $Id: place_and_route.tex,v 1.5 2004/10/16 12:51:56 fred Exp $
- % $Log: place_and_route.tex,v $
- % Revision 1.5  2004/10/16 12:51:56  fred
-+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
- % Erasing the psfig include from the file, changed the font to 10 pt
- % instead of 12 (sparing trees and not being payed by the thickness of
- % my production) and changing font to charter since I got tired of
-@@ -11,14 +12,14 @@
- \documentclass{article}
- \usepackage[dvips]{graphics}
- \usepackage[english]{babel}
--\usepackage{doublespace}
-+\usepackage{setspace}
- \usepackage{epsf}
- \usepackage{fancybox}
- \usepackage{fancyheadings}
- \usepackage{float}
- \usepackage{graphicx}
- \usepackage{here}
--\usepackage{isolatin1}
-+\usepackage[latin1]{inputenc}
- \usepackage{charter}
- \usepackage{picinpar}
- \usepackage{rotate}
-@@ -92,7 +93,8 @@
- \date{}
- \author{
- Frederic AK\hspace{2cm} Kai-shing LAM\\
--Modified by LJ
-+Modified by LJ\\
-+Modified by Chitlesh GOORAH (18/07/2007)
- }
- 
- \maketitle
-@@ -121,7 +123,7 @@
- 
- {2.2} inverter Diagram
- 
--{2.3} Buffer diagram 
-+{2.3} Buffer diagram
- 
- {2.4} sxlib gauge
- 
-@@ -149,8 +151,8 @@
- 
- {3.8} pads placement
- \\
--{4} {\bf Annexes} 
-- 
-+{4} {\bf Annexes}
-+
- \newpage
-        {\huge
-         PART 3 : }
-@@ -158,9 +160,9 @@
-         {\huge
-         Place and route
-         }
-- 
-+
- All the files used in this part are located under \\
--\texttt{/tutorial/place\_and\_route/src} directory.\\
-+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/place\_and\_route/src} directory.\\
- This directory contents three subdirectories and one Makefile :
- 
- \begin{itemize}\itemsep=-.8ex
-@@ -169,7 +171,7 @@
- \item   inv
-     \begin{itemize}\itemsep=-.8ex
-     \item   Makefile
--    \item   inv.vbe    : behavioral description 
-+    \item   inv.vbe    : behavioral description
-     \item   inv\_x1.ap : inverter cell design using GRAAL
-     \end{itemize}
- \item   buffer
-@@ -178,7 +180,7 @@
-     \item   buffer.vbe : behavioral description
-     \item   buf\_x2.ap : buffer cell design using GRAAL
-     \end{itemize}
--\item  amd2901 
-+\item  amd2901
-     \begin{itemize}\itemsep=-.8ex
-     \item   Makefile
-     \item   amd2901\_ctl.vbe : behavioral description of control
-@@ -212,9 +214,9 @@
- The predefined cells concepts, model and
- hierarchy will be introduced .\\
- Then this tutorial contain the methodology used in Alliance to produce
--the amd2901 physical layout that you conceived in Alliance Tutorial 
-+the amd2901 physical layout that you conceived in Alliance Tutorial
- PART 2 "Synthesis" (All the documents used will be provided to you).
-- 
-+
- \newpage
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- 
-@@ -225,7 +227,7 @@
- %------------------------
-     The library can be enriched by new cells with {\bf GRAAL} editor .\\
- { \bf GRAAL } is an editor of \/{\underline{symbolic }} {\it
--layout} integrating the drawing rules checker {\bf DRUC} and also 
-+layout} integrating the drawing rules checker {\bf DRUC} and also
- a net extractor.
-  The first part here aims to draw an inverter cell inv\_x1 in the shape
- of a predefined cell of sxlib complyiant with provided
-@@ -236,7 +238,7 @@
- Some tools of Alliance use a particular technological
- environment. It is indicated by the environment variable {\bf
- RDS\_TECHNO\_NAME} which must be set to
--{\bf/alliance/etc/cmos.rds}
-+{\bf/etc/alliance/cmos.rds}
- 
- \subsubsection{GRAAL}
- %--------------------
-@@ -244,7 +246,7 @@
-     with the menu { \bf CREATE }:
- \begin{itemize}\itemsep=-.4ex
- \item   The ''instance'' (physical cells importation)
--\item   The abutment boxes which define the cell limits 
-+\item   The abutment boxes which define the cell limits
- \item   Segments: DiffN, DiffP, Poly, Alu1, Alu2... CAluX is used to specify
-         a possible rectangle area for the connectors.
- \item   VIAs or contacts: ContDiffN, ContDiffP, ContPoly and
-@@ -254,10 +256,10 @@
- \end{itemize}
- 
- {\bf GRAAL} uses the environment variable {\bf
--GRAAL\_TECHNO\_NAME}. It must be set to {\bf/alliance/etc/cmos.graal}.
-+GRAAL\_TECHNO\_NAME}. It must be set to {\bf/etc/alliance/cmos.graal}.
- 
- Steps to follow to create a sxlib cell by respecting the sxlib gauge :
--( cf 2.4 Sxlib gauge ) 
-+( cf 2.4 Sxlib gauge )
- \begin{itemize}\itemsep=-.4ex
- \item	place the supply Vdd and Vss using the menu CREATE->Segment
- \item	place the VIAs using the menu CREATE->VIA
-@@ -267,7 +269,7 @@
- \item	link the transistor P and the transistor N with the Poly segment using the menu CREATE->Segment
- \item	supply each transistor by linking them with Ndiff and Pdiff segments and VIAs contacts
- \item 	define the cell limit with an abutment box using the menu CREATE->Abutment Box
--\end{itemize} 
-+\end{itemize}
- 
- \subsubsection{COUGAR}
- %--------------------
-@@ -276,7 +278,7 @@
- with the format { \bf ap }.
- To extract a netlist at transistor level, use the following command :
- \begin{commandline}
-- > cougar -t file1 file2 
-+ > cougar -t file1 file2
- \end{commandline}
- 
- { \bf COUGAR } uses the environment variables { \bf MBK\_IN\_PH }
-@@ -286,14 +288,14 @@
- the following environment variables: \\
- 
- \begin{commandline}
-- > MBK_IN_PH = ap 
-- > export MBK_IN_PH 
-- > MBK_OUT_LO = spi 
-+ > MBK_IN_PH = ap
-+ > export MBK_IN_PH
-+ > MBK_OUT_LO = spi
-  > export MBK_OUT_LO
- \end{commandline}
- 
- \begin{commandline}
-- > cougar -t circuit circuit  
-+ > cougar -t circuit circuit
- \end{commandline}
- 
- The resulting spice netlist can be then simulated using a SPICE simulator and a given
-@@ -301,7 +303,7 @@
- 
- The schematic of the transistor neltlist can also be displayed using {\bf XSCH} :
- \begin{commandline}
-- > xsch -I spi -l circuit  
-+ > xsch -I spi -l circuit
- \end{commandline}
- 
- \subsection{inverter Diagram}
-@@ -341,12 +343,12 @@
- 
- \begin{itemize}\itemsep=-.4ex
- \item The sxlib cells have whole 50 lambdas height and a multiple of 5 lambdas width.
--\item The supply Vdd and Vss are carried out in Calu1; they have 6 lambdas width and are 
-+\item The supply Vdd and Vss are carried out in Calu1; they have 6 lambdas width and are
- horizontally placed in top and bottom of the cell.
- \item The transistors P are placed close to the Vdd while transistors N are placed close
-         to the Vss.
- \item Box N must have 24 lambdas height .
--\item The special segments CAluX (CAlu1, Calu2, CAlu3...) form the cell interface (PORT\_MAP) 
-+\item The special segments CAluX (CAlu1, Calu2, CAlu3...) form the cell interface (PORT\_MAP)
- and play the role of ''flat'' connectors. They must be placed on a 5x5 grid and can be anywhere in the cell.
- \item The special segments TAlux (TAlu1, TAlu2...) are used to indicate the obstacles for the
-         router. When you want to protect AluX segment, it is necessary to cover them
-@@ -356,7 +358,7 @@
- \item The boxes N and P must be polarized. { \bf It should be respectively connected to Vdd and Vss }.
- \end{itemize}
- 
--You will find a summary of these constraints on the diagram 
-+You will find a summary of these constraints on the diagram
- \ref{Fig:gabarit}:
- 
- \begin{figure}[H]\centering
-@@ -443,7 +445,7 @@
- \begin{itemize}\itemsep=-.4ex
- \item The data-path contains the regular parts of Amd2901, the registers
-      and the arithmetic logic unit.
--\item The control part contains irregular logic, 
-+\item The control part contains irregular logic,
-     the instructions decoding and the `` flags '' computation.
- \end{itemize}
- 
-@@ -463,7 +465,7 @@
- The data-path and the control part will be placed and routed together and not separately. \\
- You will use also {\bf lvx}, the netlists comparator. When the
- system is too complex it is difficult to use {\bf proof}, the
--formal comparator (calculations too long). A netlists comparison 
-+formal comparator (calculations too long). A netlists comparison
- then is used. Test the two methods ({\bf proof} and {\bf
- lvx}).
- 
-@@ -499,7 +501,7 @@
- %---------------------------------
- 
- Generally, the file describing a netlist must have the same
--name as the one describing its physical layout 
-+name as the one describing its physical layout
- (but of course the file extention is not the same).
- The file amd2901\_dpt.vst (LOFIG) must correspond to the file
- amd2901\_dpt.ap (PHFIG). The same applies to the file
-@@ -517,7 +519,7 @@
- \noindent GENLIB\_SAVE\_LOFIG()\\
- 
- This permits to generate a structural description in a { \bf
--VST } file. At the same time, { \bf genlib } will generate 
-+VST } file. At the same time, { \bf genlib } will generate
- physical descriptions of each column in { \bf AP } files.
- It is up to you to place these columns explicitly. \\
- Edit again the file amd2901\_dpt.c and include the lines :\\
-@@ -526,7 +528,7 @@
- \noindent /* add here you placement directives !! */ \\
- \noindent GENLIB\_SAVE\_PHFIG()\\
- 
--For this placement task, you have the following {\bf GENLIB} functions : 
-+For this placement task, you have the following {\bf GENLIB} functions :
- 
- \begin{itemize}\itemsep=-.4ex
- \item GENLIB\_PLACE()
-@@ -540,12 +542,12 @@
- \end{itemize}
- 
- Use {\bf GENLIB} manual. The placement of the  data-path columns
--should not be done randomly. The routing feasibility and the quality 
-+should not be done randomly. The routing feasibility and the quality
- of the resulting layout depends on it !\\
- 
- Use genlib to generate all:
- \begin{commandline}
-- >genlib  amd2901_dpt 
-+ >genlib  amd2901_dpt
- \end{commandline}
- 
- The figure \ref{Fig:preplacement} summarizes the followed process:
-@@ -568,12 +570,12 @@
- %---------------------------------
- 
- In the same manner, edit agin the file amd2901\_core.c and insert
-- data-path explicitly. You should not place the part controls. 
-+ data-path explicitly. You should not place the part controls.
- This one exists only in the form of a structural description.
--It is the placer { \bf ocp } that will undertake some 
-+It is the placer { \bf ocp } that will undertake some
- (during the placement of the heart { \bf ocp } detects which are the
--cells not placed and supplements the placement). 
--Nevertheless you should reserve enough space for the cells placement 
-+cells not placed and supplements the placement).
-+Nevertheless you should reserve enough space for the cells placement
- { \bf to the top } of the data-path.
- 
- Include the lines:\\
-@@ -583,28 +585,28 @@
- 
- Space necessary to the placer to place the cells of the control part
- will be determined by successive approximations. You will have to
--adjust dimensions of the heart abutment box 
-+adjust dimensions of the heart abutment box
- (GENLIB\_DEF\_AB()).
- Use the command:
- 
- \begin{commandline}
-- > genlib  amd2901_core 
-+ > genlib  amd2901_core
- \end{commandline}
- 
- and
- \begin{commandline}
-- > ocp -partial amd2901_core -ioc amd2901_core amd2901_core amd2901_core_p 
-+ > ocp -partial amd2901_core -ioc amd2901_core amd2901_core amd2901_core_p
- \end{commandline}
- 
- The option {\bf -- partial} indicates that you give a partial
--placement of the data-path. 
-+placement of the data-path.
- The option { \bf -- ioc } permits to specify a placement for external
--connectors described in a .ioc file. 
--This file, amd2901\_core.ioc is provided to you (Modify it according 
-+connectors described in a .ioc file.
-+This file, amd2901\_core.ioc is provided to you (Modify it according
- to your predefined placement.
- The connectors must be in the north and in the south of your circuit).
- 
--The third argument is the netlist heart filename, the fourth is the 
-+The third argument is the netlist heart filename, the fourth is the
- name of the { \bf .ap } resulting file.
- 
- The figure \ref{Fig:placement} summarize the followed process:
-@@ -620,7 +622,7 @@
- Routing the heart by using { \bf NERO } in the following way:
- 
- \begin{commandline}
-- > nero -v -3 -p amd2901_core_p amd2901_core amd2901_core 
-+ > nero -v -3 -p amd2901_core_p amd2901_core amd2901_core
- \end{commandline}
- 
- %The option { \bf -- place } indicates that you transmit a placement, that of the heart.
-@@ -639,10 +641,10 @@
- \subsection{pads placement}
- %---------------------------------
- 
--The core of the AMD2001 is completed. 
-+The core of the AMD2001 is completed.
- We focus now on the chip with pads description, placement and routing.
- Those pads allow the connection of the inputs/outputs of the core with
--the external nets of the chip. 
-+the external nets of the chip.
- 
- The tool {\bf ring} instanciates pads that has been specified
- in a {\bf vst} netlist, place them using a file { \bf .rin }
-@@ -662,7 +664,7 @@
- Name it `` amd2902\_chip.rin '' and apply the command \\
- 
- \begin{commandline}
-- > ring amd2901_chip amd2901_chip 
-+ > ring amd2901_chip amd2901_chip
- \end{commandline}
- 
- We will validate the work of {\bf ring} with the tools { \bf druc
-@@ -682,7 +684,7 @@
-  > cougar -f amd2901_chip
- \end{commandline}
- 
--Compare two netlists : 
-+Compare two netlists :
- \begin{commandline}
-  > lvx vst al amd2901_chip amd2901_chip -f
- \end{commandline}
-@@ -698,7 +700,7 @@
- the circuit on the level transistor: \\
- 
- \begin{commandline}
--> cougar -t amd2901_chip amd2901_chip 
-+> cougar -t amd2901_chip amd2901_chip
- \end{commandline}
- \\
- 
-@@ -706,7 +708,7 @@
- \begin{commandline}
- > make view_ctl_logic
- \end{commandline}
-- 
-+
- If you want to see the data-path physical layout:
- \begin{commandline}
- > make view_dpt_physic
-@@ -723,7 +725,7 @@
- \begin{commandline}
- > make view_chip_simulation
- \end{commandline}
--     
-+
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- 
- %\newpage
-
-diff -Naur documentation/tutorials/simulation/tex/simulation.tex tutorials/simulation/tex/simulation.tex
---- documentation/tutorials/simulation/tex/simulation.tex	2004-10-16 14:52:05.000000000 +0200
-+++ tutorials/simulation/tex/simulation.tex	2007-07-18 15:47:13.000000000 +0200
-@@ -2,6 +2,7 @@
- % $Id: simulation.tex,v 1.5 2004/10/16 12:52:05 fred Exp $
- % $Log: simulation.tex,v $
- % Revision 1.5  2004/10/16 12:52:05  fred
-+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
- % Erasing the psfig include from the file, changed the font to 10 pt
- % instead of 12 (sparing trees and not being payed by the thickness of
- % my production) and changing font to charter since I got tired of
-@@ -13,13 +14,13 @@
- \documentclass{article}
- \usepackage[dvips]{graphics}
- \usepackage[english]{babel}
--\usepackage{doublespace}
-+\usepackage{setspace}
- \usepackage{fancybox}
- \usepackage{fancyheadings}
- \usepackage{float}
- \usepackage{graphicx}
- \usepackage{here}
--\usepackage{isolatin1}
-+\usepackage[latin1]{inputenc}
- \usepackage{charter}
- \usepackage{picinpar}
- \usepackage{rotate}
-@@ -96,7 +97,8 @@
- \date{}
-       
- \author{Frederic AK \hspace{2cm}  Kai-shing LAM\\
--Modified by LJ
-+Modified by LJ\\
-+Modified by Chitlesh GOORAH (18/07/2007)
- }
- 
- \maketitle
-@@ -171,7 +173,7 @@
-         }
- 
- All the files used in this part are located in the \\ 
--\texttt{/tutorial/simulation/src} directory.\\
-+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/simulation/src} directory.\\
- This directory contains two subdirectories and one Makefile : 
- \begin{itemize}
- \item The Makefile allows you to validate automatically the entire simulation part
-@@ -626,13 +628,13 @@
- \bf SXLIB }. For the functionality of the various cells and their
- interface, the sxlib man is available. The behavioral
- description of each cell is present in \\
--{\bf /alliance/cells/sxlib }.
-+{\bf \$ALLIANCE\_TOP/cells/sxlib }.
- 
- You must set the environment variable { \bf MBK\_CATA\_LIB }
- to be able to reach these cells.
- 
- \begin{commandline}
-- > MBK_CATA_LIB=/alliance/cells/sxlib
-+ > MBK_CATA_LIB=$ALLIANCE_TOP/cells/sxlib
-  > export MBK_CATA_LIB
- \end{commandline}
- 
-diff -Naur documentation/tutorials/start/start.tex tutorials/start/start.tex
---- documentation/tutorials/start/start.tex	2004-10-16 14:52:13.000000000 +0200
-+++ tutorials/start/start.tex	2007-07-18 13:28:50.000000000 +0200
-@@ -4,12 +4,13 @@
- % Original Version 1.0 in text form by Francois Pecheux
- % Version for Alliance releases 2.0 and up by Frederic Petrot
- % Modified by czo for Alliance release 4.0 (01/2000)
--% TODO : no fully working, needs some adjustements
-+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
-+% TODO : no fully working, needs some adjustments
- % $Id: start.tex,v 1.5 2004/10/16 12:52:13 fred Exp $
- %
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- \documentclass{article}
--\usepackage{charter,doublespace,here,fancybox}
-+\usepackage{charter,setspace,here,fancybox}
- \textwidth 15cm
- \textheight 23cm
- \oddsidemargin  +0.75cm
-@@ -20,7 +21,7 @@
- % Since it is tt, any char is fine
- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- \newlength{\verbatimbox}
--\settowidth{\verbatimbox}{\scriptsize\tt 
-+\settowidth{\verbatimbox}{\scriptsize\tt
- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- }
- \newenvironment{framedverbatim}
-@@ -33,8 +34,8 @@
-   \begin{Sbox}\begin{minipage}{.979\textwidth}\begin{Verbatim}}%
-  {\end{Verbatim}\end{minipage}\end{Sbox}\setlength{\shadowsize}{2pt}%
-  \shadowbox{\TheSbox}\normalsize\par\noindent}
-- 
-- 
-+
-+
- 
- %%%%%%%%%%%%%%%%%%%%%%%%
- %
-@@ -56,9 +57,9 @@
- \begin{quote}
- \em
- These tutorials introduce the design flow to be used in the
--\textbf{Alliance} CAD framework for the design and verification of a 
-+\textbf{Alliance} CAD framework for the design and verification of a
- standard cells circuit, including the pads.
--Each step of the desgin flow is supported by one or more specific 
-+Each step of the desgin flow is supported by one or more specific
- tools, whose use is briefly explained in the tutorials.
- 
- These texts are meant to be simple and comprehensive, and are to be used
-@@ -77,7 +78,7 @@
- proceeding, as it describes the main steps of the design conceptually.
- 
- \section{Before starting}
--In those tutorials you will learn the practical use of the following 
-+In those tutorials you will learn the practical use of the following
- \textbf{Alliance} tools :
- 
- In the first tutorial (simulation/ directory) :
-@@ -103,30 +104,32 @@
- In the third tutorial (synthesis/ directory) :
- \begin{itemize}
- \item \textbf{syf}  : Finite state machine synthesizer.
--\item \textbf{boom} : Boolean optimization of a logic level behavioral 
-+\item \textbf{boom} : Boolean optimization of a logic level behavioral
- description (VHDL data flow).
--\item \textbf{boog} : Mapping of a behavioral descriptiononto a standard cell 
-+\item \textbf{boog} : Mapping of a behavioral descriptiononto a standard cell
- library.
--\item \textbf{loon} : Fanout optimizer, global optimizer and timing analyser of 
-+\item \textbf{loon} : Fanout optimizer, global optimizer and timing analyser of
- \item \textbf{scapin} : Scan Path insertion
- \item \textbf{xsch} : Graphical schematic viewer.
- \end{itemize}
- 
--If you run a \texttt{c-like} shell, like \texttt{csh} or \texttt{tcsh}, 
-+If you run a \texttt{c-like} shell, like \texttt{csh} or \texttt{tcsh},
- try to run the following command :
- 
- \begin{phraseverbatim}
--~alp/addaccu %-) source /alliance/etc/alc_env.csh
-+~alp/addaccu %-) source /etc/profile.d/alc_env.csh
- \end{phraseverbatim}
- 
--Otherwise, if you run a \texttt{sh-like} shell, try to run the following 
-+Otherwise, if you run a \texttt{sh-like} shell, try to run the following
- command :
- \begin{phraseverbatim}
--~alp/addaccu %-) source /alliance/alc_env.sh
-+~alp/addaccu %-) source /etc/profile.d/alc_env.sh
- \end{phraseverbatim}
- \\
-+When a user logs in, these environment variables are automatically set from various places.
-+\\
- Before we proceed to the tutorial, you must make sure that the
--\textbf{Alliance} tools are readilly available when invoking them at the 
-+\textbf{Alliance} tools are readilly available when invoking them at the
- prompt.
- The prompt in represented in the following text by the symbol~:
- \begin{phraseverbatim}
-@@ -136,7 +139,7 @@
- directory, and \texttt{\%-)} is supposed to give us courage!
- 
- \section{Execution environment set up}
--Later, before you will start examining alliance tools, you will probably want 
-+Later, before you will start examining alliance tools, you will probably want
- to know the environment variables setup.
- To see it, please enter the following command :
- 
-@@ -147,18 +150,21 @@
- \begin{figure}[H]\center\leavevmode
- \begin{framedverbatim}
- ~alp/addaccu %-) env | grep MBK
--MBK_OUT_PH=ap
--MBK_CATAL_NAME=CATAL
-+MBK_IN_PH=ap
- MBK_SCALE_X=100
-+MBK_CATAL_NAME=CATAL
-+MBK_OUT_PH=ap
-+MBK_OUT_LO=vst
- MBK_VSS=vss
--MBK_CATA_LIB=.:/alliance/cells/sxlib:/alliance/cells/padlib
--MBK_WORK_LIB=.
--MBK_VDD=vdd
- MBK_C4_LIB=./cellsC4
-+MBK_VDD=vdd
-+MBK_TARGET_LIB=\$ALLIANCE\_TOP/cells/sxlib
- MBK_IN_LO=vst
--MBK_IN_PH=ap
--MBK_TARGET_LIB=/alliance/cells/sxlib
--MBK_OUT_LO=vst
-+MBK_WORK_LIB=.
-+MBK_CATA_LIB=.:/usr/lib/alliance/cells/sxlib:/usr/lib/alliance/cells/dp_sxlib:
-+/usr/lib/alliance/cells/rflib:/usr/lib/alliance/cells/ramlib:
-+/usr/lib/alliance/cells/romlib:/usr/lib/alliance/cells/pxlib:
-+/usr/lib/alliance/cells/padlib
- \end{framedverbatim}
- \caption{\label{mbk} \texttt{MBK} environment variables.}
- \end{figure}
-@@ -167,12 +173,12 @@
- variables are documented in each tutorial.
- 
- \section{File Formats}
--One of the interesting features of \textbf{Alliance} is that different 
-+One of the interesting features of \textbf{Alliance} is that different
- file formats can be used for both netlist and layout view.
--However, 
--in the design methodology we wish to promote, some formats are 
-+However,
-+in the design methodology we wish to promote, some formats are
- recommended.
--The \texttt{vst}, structural \textbf{VHDL}, is dedicated to netlist 
-+The \texttt{vst}, structural \textbf{VHDL}, is dedicated to netlist
- specification.
- The \texttt{al} format is dedicated to extracted layout representation.
- The \texttt{ap} format is the usual layout format.
-diff -Naur documentation/tutorials/synthesis/src/amd2901/Makefile tutorials/synthesis/src/amd2901/Makefile
---- documentation/tutorials/synthesis/src/amd2901/Makefile	2002-07-25 14:50:18.000000000 +0200
-+++ tutorials/synthesis/src/amd2901/Makefile	2007-07-18 19:34:53.000000000 +0200
-@@ -2,17 +2,17 @@
- all: EXAMPLE VAR  CATAL02 res.pat
- 
- 
--VAR: 
-+VAR:
- 	MBK_IN_LO=vst;export MBK_IN_LO ;\
--	MBK_CATA_LIB=/asim/alliance/cells/sxlib;export MBK_CATA_LIB
-+	MBK_CATA_LIB=$ALLIANCE_TOP/cells/sxlib;export MBK_CATA_LIB
- 
- CATAL01:
--	echo amd2901_ctl C >CATAL  
-+	echo amd2901_ctl C >CATAL
- 	echo amd2901_dpt C >>CATAL
- 
- CATAL02:
- 	echo amd2901_dpt C >CATAL
--	
-+
- EXAMPLE:
- 	genlib circuit
- 
-@@ -38,7 +38,7 @@
- 
- res2.pat: amd2901_chip.vst pattern.pat amd2901_core.vst CATAL
- 	asimut amd2901_chip pattern res2
--	touch amd2901_chip.vst 
-+	touch amd2901_chip.vst
- 
- clean :
- 	rm -f Makefile-*                 \
-diff -Naur documentation/tutorials/synthesis/tex/synthesis.tex tutorials/synthesis/tex/synthesis.tex
---- documentation/tutorials/synthesis/tex/synthesis.tex	2004-10-16 14:52:17.000000000 +0200
-+++ tutorials/synthesis/tex/synthesis.tex	2007-07-18 15:46:54.000000000 +0200
-@@ -2,6 +2,7 @@
- % $Id: synthesis.tex,v 1.4 2004/10/16 12:52:17 fred Exp $
- % $Log: synthesis.tex,v $
- % Revision 1.4  2004/10/16 12:52:17  fred
-+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
- % Erasing the psfig include from the file, changed the font to 10 pt
- % instead of 12 (sparing trees and not being payed by the thickness of
- % my production) and changing font to charter since I got tired of
-@@ -11,13 +12,13 @@
- \documentclass{article}
- \usepackage[dvips]{graphics}
- \usepackage[english]{babel}
--\usepackage{doublespace}
-+\usepackage{setspace}
- \usepackage{fancybox}
- \usepackage{fancyheadings}
- \usepackage{float}
- \usepackage{graphicx}
- \usepackage{here}
--\usepackage{isolatin1}
-+\usepackage[latin1]{inputenc}
- \usepackage{charter}
- \usepackage{picinpar}
- \usepackage{rotate}
-@@ -89,7 +90,8 @@
- \date{}   
- \author{
-               Ak Frederic\hspace{2cm} Lam Kai-shing\\
--Modified by LJ
-+Modified by LJ\\
-+Modified by Chitlesh GOORAH (18/07/2007)
- }
- 
- \maketitle
-@@ -220,7 +222,7 @@
-         }
- 
- All the files used in this part are located under \\
--\texttt{/tutorial/synthesis/src} directory.\\
-+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/synthesis/src} directory.\\
- This directory contents four subdirectories and one Makefile :
- \begin{itemize}\itemsep=-.8ex
- 

alliance.spec

@@ -1,9 +1,10 @@
 %define        prefix    %{_libdir}/%{name}
 %define        snapshot  20070718
+%define        _default_patch_fuzz  2
 
 Name:          alliance
 Version:       5.0
-Release:       10.%{snapshot}snap%{?dist}
+Release:       21.%{snapshot}snap%{?dist}
 Summary:       Alliance VLSI CAD Sytem
 
 License:       GPLv2
@@ -16,7 +17,7 @@ Patch0:        alliance-env.patch
 Patch1:        alliance-examples.patch
 Patch2:        alliance-run.patch
 Patch3:        alliance-perms.patch
-Patch4:        alliance-tutorials.patch
+Patch4:        alliance-gcc43.patch
 
 Source1:       xsch.desktop
 Source2:       dreal.desktop
@@ -35,11 +36,16 @@ Source11:      xfsm.png
 Source12:      xpat.png
 Source13:      xsch.png
 
+Source14:      %{name}-5.0-tutorials.tar.bz2
+
 BuildRoot:     %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 BuildRequires: lesstif-devel libXt-devel byacc desktop-file-utils bison
 BuildRequires: libXp-devel libXpm-devel libstdc++-devel flex m4
-BuildRequires: transfig ghostscript tetex-latex
+BuildRequires: transfig ghostscript
 
+Requires:       %{name}-libs = %{version}-%{release}
+# 442379
+Requires(post): %{name}-libs = %{version}-%{release}
 
 %description
 Alliance is a complete set of free CAD tools and portable libraries for
@@ -72,6 +78,20 @@ Alliance provides CAD tools covering most of all the digital design flow:
  * Netlist extraction and verification
  * Design rules checking
 
+%{name} is listed among Fedora Electronic Lab (FEL) packages.
+
+
+%package libs
+Summary:      Alliance VLSI CAD Sytem - multilibs
+Group:        Applications/Engineering
+Requires:     %{name} = %{version}-%{release}
+Requires:     electronics-menu
+Obsoletes:    %{name} < 5.0-12
+
+
+%description libs
+Architecture dependent files for the Alliance VLSI CAD Sytem.
+
 
 %package doc
 Summary:      Alliance VLSI CAD Sytem - Documentations
@@ -101,17 +121,12 @@ sed -i "s|ALLIANCE_TOP|%{prefix}|" *.desktop
 %patch3 -p0 -b .perms
 
 
-##  Updating old tutorials
-%patch4 -p0 -b .tutorials
+### 2008 March: TexLive introduction to Rawhide
+sed -i "s|tutorials||" documentation/Makefile.in
+tar -xvf %{SOURCE14}
 
-pushd documentation/tutorials
-  for folder in place_and_route/tex simulation/tex start synthesis/tex; do
-    pushd $folder
-      %{__make}
-    popd
-  done
-popd
 
+%patch4 -p1 -b .include
 
 # make sure the man pages are UTF-8...
 for nonUTF8 in distrib/doc/alc_origin.1 alcban/man1/alcbanner.1 \
@@ -165,11 +180,9 @@ popd
 
 # documentation
 %{__cp} -pr %{buildroot}%{prefix}/doc/ .
-%{__cp} -pr %{buildroot}%{prefix}/tutorials/ .
 %{__cp} -pr %{buildroot}%{prefix}/examples/alliance-examples/ .
 
 %{__rm} -rf %{buildroot}%{prefix}/doc/
-%{__rm} -rf %{buildroot}%{prefix}/tutorials/
 %{__rm} -rf %{buildroot}%{prefix}/examples/
 
 # correcting minor documentation details
@@ -183,32 +196,28 @@ find %{buildroot} -name '*.la' -exec rm -f {} ';'
 %{__cp} -p %{SOURCE8} %{SOURCE9} %{SOURCE10} %{SOURCE11} %{SOURCE12} %{SOURCE13} \
     %{buildroot}%{_datadir}/icons/hicolor/48x48/apps/
 
-# desktop files
+
+# desktop files with enhanced menu from electronics-menu now on Fedora
+# thanks Peter Brett
 for desktopfile in *.desktop; do
 desktop-file-install --vendor fedora          \
   --add-category Engineering                  \
+  --add-category Electronics                  \
+  --remove-category Science                   \
   --dir %{buildroot}%{_datadir}/applications/ \
   $desktopfile
 done
 
 
-##  Makefiles and tex folder cleanups
-pushd tutorials
-  for folder in place_and_route/tex simulation/tex start synthesis/tex; do
-    %{__rm} -rf $folder
-  done
-popd
-
-
 # Architecture independent files
 %{__mv} %{buildroot}%{prefix}/cells %{buildroot}%{_datadir}/%{name}/
-%{__mv} %{buildroot}%{prefix}/etc %{buildroot}%{_datadir}/%{name}/
+%{__mv} %{buildroot}%{prefix}/etc   %{buildroot}%{_datadir}/%{name}/
 
 
 # protecting hardcoded links
-ln -sf ../../..%{_datadir}/%{name}/cells %{buildroot}%{prefix}/cells
-ln -sf ../../..%{_datadir}/%{name}/etc %{buildroot}%{prefix}/etc
-ln -sf ../../..%{_datadir}/%{name}/man %{buildroot}%{prefix}/man
+ln -sf ../../..%{_datadir}/%{name}/cells    %{buildroot}%{prefix}/cells
+ln -sf ../../..%{_datadir}/%{name}/etc      %{buildroot}%{prefix}/etc
+ln -sf ../../..%{_datadir}/%{name}/man      %{buildroot}%{prefix}/man
 
 
 # manpage-not-gzipped
@@ -257,13 +266,15 @@ touch --no-create %{_datadir}/icons/hicolor || :
 %defattr(-,root,root,-)
 %{prefix}/
 %{_datadir}/%{name}/
-%config %{_sysconfdir}/ld.so.conf.d/*
 %{_datadir}/icons/hicolor/48x48/apps/*
+
+
+%files libs
+%config %{_sysconfdir}/ld.so.conf.d/*
 %{_datadir}/applications/fedora-*.desktop
 %{_sysconfdir}/profile.d/alc_env.*
 
 
-
 %files doc
 %doc doc/html/
 %doc doc/design-flow
@@ -281,6 +292,49 @@ touch --no-create %{_datadir}/icons/hicolor || :
 
 
 %changelog
+* Mon Sep 15 2008 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-21.20070718snap
+- Bugfix : Alliance incorrectly mungs your path and adds the cwd to the path #459336
+- Bugfix : Latest alc_env fixes broken system man path #452645
+
+* Mon Aug 04 2008 Aanjhan Ranganathan <aanjhan [AT] tuxmaniac DOT com> - 5.0-20.20070718snap
+- Bumped release version to match changelog
+
+* Fri Aug 01 2008 Aanjhan Ranganathan <aanjhan [AT] tuxmaniac DOT com> - 5.0-16.20070718snap
+- Rebuild using latest lesstif-devel. For #368441
+- Temporarily set fuzz parameter of patch system to be 2
+
+* Fri May 30 2008 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-16.20070718snap
+- Bugfix /etc/profile.d/alc_env.csh problem #449062 #448480
+
+* Mon May 26 2008 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-15.20070718snap
+- Bugfix: error in postinstall scriptlet: /etc/profile.d/alc_env.sh not found #442379
+- Bugfix: /etc/profile.d/alc_env.csh assumes MANPATH is preset #440083
+
+* Tue May 20 2008 Thibault North < tnorth [AT] fedoraproject DOT org> - 5.0-14.20070718snap
+- Add to Electronics Menu
+
+* Fri Mar 21 2008 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-13.20070718snap
+- Requiring new FEL menu structure
+- Fixing previous desktop files
+- closing unconfirmed bug #427691
+- fixing multilibs issues #340621
+
+* Tue Mar 18 2008 Thibault North < tnorth [AT] fedoraproject DOT org> - 5.0-13.20070718snap
+- dropped patch4: alliance-tutorials.patch
+- fixed TexLive related issues for documentation
+-   commenting previous make in directory tutorials
+-   attached tutorials made in F8 Werewolf
+- dropped BR :tetex-latex
+- added patch4: including more useful includes to C files
+- fixed bug #434020 : alliance failed massrebuild attempt for GCC4.3
+
+* Mon Feb 18 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 5.0-12.20070718snap
+- Autorebuild for GCC 4.3
+
+* Sun Feb 10 2008 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-11.20070718snap
+- mass rebuild for gcc43 on rawhide
+- ensuring multilibs (#340621)
+
 * Thu Aug 23 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-10.20070718snap
 - complying to freedesktop policies - categories
 

sources

@@ -1 +1,2 @@
 917f4493c09f6f5c49d5a606a5e9bbd8  alliance-5.0-20070718.tar.gz
+32cac3116f85713aec2e1e18379811eb  alliance-5.0-tutorials.tar.bz2