Renamed to amavis

Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>

.gitignore

@@ -1 +0,0 @@
-amavisd-new-2.8.0.tar.gz

README.fedora

@@ -1,68 +0,0 @@
-INSTALLATION
-------------
-Installing amavisd-new from Fedora is simple.  First, install the
-amavisd-new package:
-
-  yum -y install amavisd-new
-
-Don't be alarmed at the number of dependencies this installs.  This
-package tries to be as full-featured as possible, including many
-optional components for amavisd-new.
-
-Next, configure amavisd-new to start on boot:
-
-  chkconfig --level 2345 amavisd on
-
-If you want to use the Clam Antivirus daemon (recommended), set it to
-start on boot as well:
-
-  chkconfig --level 2345 clamd.amavisd on
-
-When you are ready, start the clamd.amavisd (optional but recommended)
-and amavisd services:
-
-  service clamd.amavisd start
-  service amavisd start
-
-Check /var/log/maillog for startup messages from both daemons.
-
-The next step is to integrate amavisd with your MTA.
-
-POSTFIX
--------
-The simplest method for enabling amavisd-new support in postfix is to
-use the content_filter configuration option to tell postfix to relay
-mail through amavisd-new using SMTP.  In this configuration, incoming
-mail passes from postfix to amavisd and back to postfix.  (Mail never
-actually leaves the control of postfix however, since amavisd does not
-answer OK until it scans the message and transfers it back to postfix.
-The worst that can happen is a failure at just the right time could
-allow a message to be queued twice.)
-
-Add the following to /etc/postfix/main.cf:
-
-  content_filter = smtp:[127.0.0.1]:10024
-
-You will probably also want to limit the number of postfix processes
-to keep mail from coming in faster than it can be processed by adding
-the following to /etc/postfix/main.cf:
-
-  default_process_limit = 20
-
-Add the following to /etc/postfix/master.cf:
-
-  127.0.0.1:10025 inet n - - - 0 smtpd -o content_filter=
-
-Be sure to read the TUNING section in README.postfix for information
-on process limits.
-
-SENDMAIL
---------
-See README.sendmail* in this directory.
-
-Please note that amavisd-new's milter functionality is not enabled in
-this package.
-
-EXIM
-----
-See README.exim* in this directory.

README.quarantine

@@ -1,24 +0,0 @@
-To enable quarantine support simply change the following line in
-/etc/amavisd/amavisd.conf:
-
-  $QUARANTINEDIR = undef;      # -Q
-
-to
-
-  $QUARANTINEDIR = "$MYHOME/quarantine";      # -Q
-
-then restart amavisd.
-
-The following will make the change for you:
-
-  sed -i.orig -e '/\$QUARANTINEDIR =/s,undef,"$MYHOME/quarantine",' \
-      /etc/amavisd/amavisd.conf
-
-PLEASE NOTE:  This is intentionally a manual step.  Before turning on
-the quarantine feature of amavisd-new, be sure that there is a
-sufficient amount of free space on /var/spool/amavisd/quarantine.
-"Sufficient" depends entirely on your environment.
-
-In the default configuration, files in the quarantine directory will
-be automatically deleted by tmpwatch after 30 days.  See
-/etc/cron.daily/amavisd to adjust this behavior for your environment.

amavis-clamd.conf

@@ -1,20 +0,0 @@
-# Use system logger.
-LogSyslog yes
-
-# Specify the type of syslog messages - please refer to 'man syslog'
-# for facility names.
-LogFacility LOG_MAIL
-
-# This option allows you to save a process identifier of the listening
-# daemon (main thread).
-PidFile /var/run/amavisd/clamd.pid
-
-# Remove stale socket after unclean shutdown.
-# Default: disabled
-FixStaleSocket yes
-
-# Run as a selected user (clamd must be started by root).
-User amavis
-
-# Path to a local socket file the daemon will listen on.
-LocalSocket /var/spool/amavisd/clamd.sock

amavis-clamd.init

@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# chkconfig: - 78 32
-# description: The clamd server running for amavisd
-
-CLAMD_SERVICE=amavisd
-. /usr/share/clamav/clamd-wrapper

amavis-clamd.sysconfig

@@ -1,3 +0,0 @@
-CLAMD_CONFIGFILE=/etc/clamd.d/amavisd.conf
-CLAMD_SOCKET=/var/spool/amavisd/clamd.sock
-CLAMD_OPTIONS=

amavisd-condrestart.patch

@@ -1,16 +0,0 @@
---- amavisd_init.sh.orig	2004-02-23 16:09:02.000000000 -0600
-+++ amavisd_init.sh	2004-02-23 16:13:52.000000000 -0600
-@@ -60,8 +60,12 @@
- 	action $"Reloading ${prog_base}:" ${prog} -c ${prog_config_file} reload
- 	RETVAL=$?
- 	;;
-+  condrestart)
-+	[ -f /var/lock/subsys/${prog_base} ] && $0 restart || :
-+	RETVAL=$?
-+	;;
-   *)
--	echo "Usage: $0 {start|stop|status|restart|reload}"
-+	echo "Usage: $0 {start|stop|status|restart|reload|condrestart}"
- 	exit 1
- esac
- 

amavisd-conf.patch

@@ -1,127 +0,0 @@
---- amavisd-new-2.8.0/amavisd.conf		2012-06-30 23:33:32.000000000 +0200
-+++ amavisd-new-2.8.0/amavisd.conf.conf		2013-12-02 16:24:05.000000000 +0100
-@@ -14,25 +14,25 @@
- # $bypass_decode_parts = 1;         # controls running of decoders&dearchivers
- 
- $max_servers = 2;            # num of pre-forked children (2..30 is common), -m
--$daemon_user  = 'vscan';     # (no default;  customary: vscan or amavis), -u
--$daemon_group = 'vscan';     # (no default;  customary: vscan or amavis), -g
-+$daemon_user  = 'amavis';    # (no default;  customary: vscan or amavis), -u
-+$daemon_group = 'amavis';    # (no default;  customary: vscan or amavis), -g
- 
- $mydomain = 'example.com';   # a convenient default for other settings
- 
--# $MYHOME = '/var/amavis';   # a convenient default for other settings, -H
-+$MYHOME = '/var/spool/amavisd';   # a convenient default for other settings, -H
- $TEMPBASE = "$MYHOME/tmp";   # working directory, needs to exist, -T
- $ENV{TMPDIR} = $TEMPBASE;    # environment variable TMPDIR, used by SA, etc.
--$QUARANTINEDIR = '/var/virusmails';  # -Q
-+$QUARANTINEDIR = undef;      # -Q
- # $quarantine_subdir_levels = 1;  # add level of subdirs to disperse quarantine
- # $release_format = 'resend';     # 'attach', 'plain', 'resend'
- # $report_format  = 'arf';        # 'attach', 'plain', 'resend', 'arf'
- 
- # $daemon_chroot_dir = $MYHOME;   # chroot directory or undef, -R
- 
--# $db_home   = "$MYHOME/db";      # dir for bdb nanny/cache/snmp databases, -D
-+$db_home   = "$MYHOME/db";        # dir for bdb nanny/cache/snmp databases, -D
- # $helpers_home = "$MYHOME/var";  # working directory for SpamAssassin, -S
--# $lock_file = "$MYHOME/var/amavisd.lock";  # -L
--# $pid_file  = "$MYHOME/var/amavisd.pid";   # -P
-+$lock_file = "/var/run/amavisd/amavisd.lock";  # -L
-+$pid_file  = "/var/run/amavisd/amavisd.pid";   # -P
- #NOTE: create directories $MYHOME/tmp, $MYHOME/var, $MYHOME/db manually
- 
- $log_level = 0;              # verbosity 0..5, -d
-@@ -113,11 +113,11 @@
- # $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
- #   defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
- 
--$virus_admin               = "virusalert\@$mydomain";  # notifications recip.
-+$virus_admin               = undef;                    # notifications recip.
- 
--$mailfrom_notify_admin     = "virusalert\@$mydomain";  # notifications sender
--$mailfrom_notify_recip     = "virusalert\@$mydomain";  # notifications sender
--$mailfrom_notify_spamadmin = "spam.police\@$mydomain"; # notifications sender
-+$mailfrom_notify_admin     = undef;                    # notifications sender
-+$mailfrom_notify_recip     = undef;                    # notifications sender
-+$mailfrom_notify_spamadmin = undef;                    # notifications sender
- $mailfrom_to_quarantine = ''; # null return path; uses original sender if undef
- 
- @addr_extension_virus_maps      = ('virus');
-@@ -151,10 +151,10 @@
- # $notify_method  = 'smtp:[127.0.0.1]:10025';
- # $forward_method = 'smtp:[127.0.0.1]:10025';  # set to undef with milter!
- 
--# $final_virus_destiny      = D_DISCARD;
--# $final_banned_destiny     = D_DISCARD;
--# $final_spam_destiny       = D_PASS;  #!!!  D_DISCARD / D_REJECT
--# $final_bad_header_destiny = D_PASS;
-+$final_virus_destiny      = D_DISCARD;
-+$final_banned_destiny     = D_BOUNCE;
-+$final_spam_destiny       = D_DISCARD;  #!!!  D_DISCARD / D_REJECT
-+$final_bad_header_destiny = D_BOUNCE;
- # $bad_header_quarantine_method = undef;
- 
- # $os_fingerprint_method = 'p0f:*:2345';  # to query p0f-analyzer.pl
-@@ -335,9 +335,9 @@
-   ['arj',  \&do_unarj, ['unarj', 'arj'] ],
-   ['arc',  \&do_arc,   ['nomarch', 'arc'] ],
-   ['zoo',  \&do_zoo,   ['zoo', 'unzoo'] ],
--  ['doc',  \&do_ole,   'ripole'],
-+# ['doc',  \&do_ole,   'ripole'],  # no ripole package so far
-   ['cab',  \&do_cabextract, 'cabextract'],
--  ['tnef', \&do_tnef_ext, 'tnef'],
-+# ['tnef', \&do_tnef_ext, 'tnef'],  # use internal do_tnef() instead
-   ['tnef', \&do_tnef],
- # ['lha',  \&do_lha,   'lha'],  # not safe, use 7z instead
- # ['sit',  \&do_unstuff, 'unstuff'],  # not safe
-@@ -375,16 +375,16 @@
- #   qr/^(?:310|420)[,\s]*(?:.* <<< )?(.+?)(?: ; |$)/m ],
- # settings for the SAVAPI3.conf: ArchiveScan=1, HeurLevel=2, MailboxScan=1
- 
--# ### http://www.clamav.net/
--# ['ClamAV-clamd',
--#   \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
--#   qr/\bOK$/m, qr/\bFOUND$/m,
--#   qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
--# # NOTE: run clamd under the same user as amavisd - or run it under its own
--# #   uid such as clamav, add user clamav to the amavis group, and then add
--# #   AllowSupplementaryGroups to clamd.conf;
--# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
--# #   this entry; when running chrooted one may prefer a socket under $MYHOME.
-+  ### http://www.clamav.net/
-+  ['ClamAV-clamd',
-+    \&ask_daemon, ["CONTSCAN {}\n", "/var/spool/amavisd/clamd.sock"],
-+    qr/\bOK$/m, qr/\bFOUND$/m,
-+    qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-+  # NOTE: run clamd under the same user as amavisd - or run it under its own
-+  #   uid such as clamav, add user clamav to the amavis group, and then add
-+  #   AllowSupplementaryGroups to clamd.conf;
-+  # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-+  #   this entry; when running chrooted one may prefer a socket under $MYHOME.
- 
- # ### http://www.clamav.net/ and CPAN  (memory-hungry! clamd is preferred)
- # # note that Mail::ClamAV requires perl to be build with threading!
---- amavisd-new-2.8.0/amavisd-nanny		2009-06-25 19:57:13.000000000 +0200
-+++ amavisd-new-2.8.0/amavisd-nanny.conf	2012-07-08 01:00:58.000000000 +0200
-@@ -58,7 +58,7 @@
- 
- my($dbfile) = 'nanny.db';
- my($db_home) =  # DB databases directory
--  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/amavis/db';
-+  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/spool/amavisd/db';
- my($wakeuptime) = 2;  # -w, sleep time in seconds, may be fractional
- my($repeatcount);     # -c, repeat count (when defined)
- 
---- amavisd-new-2.8.0/amavisd-agent		2009-06-18 21:17:30.000000000 +0200
-+++ amavisd-new-2.8.0/amavisd-agent.conf	2012-07-08 01:03:16.000000000 +0200
-@@ -50,7 +50,7 @@
- 
- my($dbfile) = 'snmp.db';
- my($db_home) =  # DB databases directory
--  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/amavis/db';
-+  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/spool/amavisd/db';
- 
- my($wakeuptime) = 10;  # -w, sleep time in seconds, may be fractional
- my($repeatcount);      # -c, repeat count (when defined)

amavisd-init.patch

@@ -1,24 +0,0 @@
---- amavisd-new-2.3.2.orig/amavisd_init.sh	2002-11-15 22:22:47.000000000 -0600
-+++ amavisd-new-2.3.2/amavisd_init.sh	2005-07-06 16:11:23.000000000 -0500
-@@ -4,10 +4,10 @@
- #		(to be used with version amavisd-new-20020630 or later)
- #
- 
--# chkconfig: 2345 79 31
-+# chkconfig: - 79 31
- # description: amavisd is an interface between MTA and content checkers
- # processname: amavisd
--# pidfile: /var/amavis/amavisd.pid
-+# pidfile: /var/run/amavisd/amavisd.pid
- 
- # Source function library.
- . /etc/rc.d/init.d/functions
-@@ -19,7 +19,7 @@
- prog="/usr/sbin/amavisd"
- prog_base="$(basename ${prog})"
- 
--prog_config_file="/etc/amavisd.conf"
-+prog_config_file="/etc/amavisd/amavisd.conf"
- 
- # Source configuration.
- [ -e /etc/sysconfig/${prog_base} ] && . /etc/sysconfig/${prog_base}

amavisd-new-2.8.0-init_network.patch

@@ -1,13 +0,0 @@
---- amavisd-new-2.8.0/amavisd_init.sh	2002-11-15 20:22:47.000000000 -0800
-+++ amavisd-new-2.8.0/amavisd_init.sh.new	2013-05-10 09:54:58.849116467 -0700
-@@ -12,8 +12,8 @@
- # Source function library.
- . /etc/rc.d/init.d/functions
- 
--# Source networking configuration.
--. /etc/sysconfig/network
-+## Source networking configuration.
-+#. /etc/sysconfig/network
- 
- #prog="/opt/amavisd-new/sbin/amavisd"
- prog="/usr/sbin/amavisd"

amavisd-new-tmpfiles.conf

@@ -1,2 +0,0 @@
-d /var/run/amavisd 755 amavis amavis -
-d /var/run/clamd.amavisd 755 amavis amavis -

amavisd-new.spec

@@ -1,428 +0,0 @@
-#%%define prerelease rc2
-
-Summary:        Email filter with virus scanner and spamassassin support
-Name:           amavisd-new
-Version:        2.8.0
-Release:        8%{?prerelease:.%{prerelease}}%{?dist}
-# LDAP schema is GFDL, some helpers are BSD, core is GPLv2+
-License:        GPLv2+ and BSD and GFDL
-Group:          Applications/System
-URL:            http://www.ijs.si/software/amavisd/
-Source0:        http://www.ijs.si/software/amavisd/amavisd-new-%{version}%{?prerelease:-%{prerelease}}.tar.gz
-Source1:        amavis-clamd.init
-Source2:        amavis-clamd.conf
-Source3:        amavis-clamd.sysconfig
-Source4:        README.fedora
-Source5:        README.quarantine
-Source6:        amavisd.cron
-Source7:        amavisd-snmp.init
-Source8:        amavisd-new-tmpfiles.conf
-Patch0:         amavisd-conf.patch
-Patch1:         amavisd-init.patch
-Patch2:         amavisd-condrestart.patch
-# Don't source /etc/sysconfig/network in init script; the network check
-# is commented out upstream so there's no apparent reason to source it,
-# and it can't be relied upon to exist in recent Fedora builds. Mail
-# sent upstream to amavis-users ML 2013-05-10. -adamw
-Patch3:         amavisd-new-2.8.0-init_network.patch
-BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Requires:       /usr/sbin/clamd, /etc/clamd.d
-Requires:       /usr/sbin/tmpwatch, /etc/cron.daily
-Requires:       /usr/bin/ar
-Requires:       altermime
-Requires:       arj
-Requires:       bzip2
-Requires:       cabextract
-Requires:       cpio
-Requires:       file
-Requires:       freeze
-Requires:       gzip
-Requires:       lzop
-Requires:       nomarch
-Requires:       p7zip, p7zip-plugins
-Requires:       tar
-Requires:       lrzip
-Requires:       unzoo
-# We probably should parse the fetch_modules() code in amavisd for this list.
-# These are just the dependencies that don't get picked up otherwise.
-Requires:       perl(Archive::Tar)
-Requires:       perl(Archive::Zip)
-Requires:       perl(Authen::SASL)
-Requires:       perl(Compress::Zlib) >= 1.35
-Requires:       perl(Convert::TNEF)
-Requires:       perl(Convert::UUlib)
-Requires:       perl(Crypt::OpenSSL::RSA)
-Requires:       perl(DBD::SQLite)
-Requires:       perl(DBI)
-Requires:       perl(Digest::SHA)
-Requires:       perl(Digest::SHA1)
-Requires:       perl(IO::Socket::INET6)
-Requires:       perl(IO::Socket::SSL)
-Requires:       perl(IO::Stringy)
-Requires:       perl(MIME::Body)
-Requires:       perl(MIME::Decoder::Base64)
-Requires:       perl(MIME::Decoder::Binary)
-Requires:       perl(MIME::Decoder::Gzip64)
-Requires:       perl(MIME::Decoder::NBit)
-Requires:       perl(MIME::Decoder::QuotedPrint)
-Requires:       perl(MIME::Decoder::UU)
-Requires:       perl(MIME::Head)
-Requires:       perl(Mail::DKIM)
-Requires:       perl(Mail::Field)
-Requires:       perl(Mail::Header)
-Requires:       perl(Mail::Internet)
-Requires:       perl(Mail::SPF)
-Requires:       perl(Mail::SpamAssassin)
-Requires:       perl(Net::DNS)
-Requires:       perl(Net::LDAP)
-Requires:       perl(Net::SSLeay)
-Requires:       perl(NetAddr::IP)
-Requires:       perl(Razor2::Client::Version)
-Requires:       perl(Socket6)
-Requires:       perl(URI)
-Requires(pre):  shadow-utils
-Requires(post): /sbin/chkconfig
-Requires(preun): /sbin/service, /sbin/chkconfig
-Requires(postun): /sbin/service
-BuildArch:      noarch
-
-%package snmp
-Group:          Applications/System
-Summary:        Exports amavisd SNMP data
-Requires:       %{name} = %{version}-%{release}
-Requires(post): /sbin/chkconfig
-Requires(preun): /sbin/service, /sbin/chkconfig
-Requires(postun): /sbin/service
-
-%description
-amavisd-new is a high-performance and reliable interface between mailer
-(MTA) and one or more content checkers: virus scanners, and/or
-Mail::SpamAssassin Perl module. It is written in Perl, assuring high
-reliability, portability and maintainability. It talks to MTA via (E)SMTP
-or LMTP, or by using helper programs. No timing gaps exist in the design
-which could cause a mail loss.
-
-%description snmp
-This package contains the program amavisd-snmp-subagent, which can be
-used as a SNMP AgentX, exporting amavisd statistical counters database
-(snmp.db) as well as a child process status database (nanny.db) to a
-SNMP daemon supporting the AgentX protocol (RFC 2741), such as NET-SNMP.
-
-It is similar to combined existing utility programs amavisd-agent and
-amavisd-nanny, but instead of writing results as text to stdout, it
-exports data to a SNMP server running on a host (same or remote), making
-them available to SNMP clients (such a Cacti or mrtg) for monitoring or
-alerting purposes.
-
-%prep
-%setup -q -n %{name}-%{version}%{?prerelease:-%{prerelease}}
-%patch0 -p1
-%patch1 -p1
-%patch2 -p0
-%patch3 -p1
-
-install -p -m 644 %{SOURCE4} %{SOURCE5} README_FILES/
-sed -e 's,/var/amavis/amavisd.sock\>,/var/spool/amavisd/amavisd.sock,' -i amavisd-release
-
-%build
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-install -D -p -m 755 amavisd $RPM_BUILD_ROOT%{_sbindir}/amavisd
-install -D -p -m 755 amavisd-snmp-subagent $RPM_BUILD_ROOT%{_sbindir}/amavisd-snmp-subagent
-ln -sf clamd $RPM_BUILD_ROOT%{_sbindir}/clamd.amavisd
-
-mkdir -p $RPM_BUILD_ROOT%{_bindir}
-install -p -m 755 amavisd-{agent,nanny,release} $RPM_BUILD_ROOT%{_bindir}/
-
-install -D -p -m 755 amavisd_init.sh $RPM_BUILD_ROOT%{_initrddir}/amavisd
-install -D -p -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_initrddir}/clamd.amavisd
-install -D -p -m 755 %{SOURCE7} $RPM_BUILD_ROOT%{_initrddir}/amavisd-snmp
-
-install -D -p -m 644 amavisd.conf $RPM_BUILD_ROOT%{_sysconfdir}/amavisd/amavisd.conf
-install -D -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/clamd.d/amavisd.conf
-install -D -p -m 644 %{SOURCE3} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/clamd.amavisd
-install -D -p -m 755 %{SOURCE6} $RPM_BUILD_ROOT%{_sysconfdir}/cron.daily/amavisd
-
-mkdir -p $RPM_BUILD_ROOT/var/spool/amavisd/{tmp,db,quarantine}
-touch $RPM_BUILD_ROOT/var/spool/amavisd/clamd.sock
-mkdir -p $RPM_BUILD_ROOT/var/run/{amavisd,clamd.amavisd}
-
-%if 0%{?fedora}%{?rhel} > 6
-install -D -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/tmpfiles.d/amavisd-new.conf
-%endif
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%pre
-getent group amavis > /dev/null || %{_sbindir}/groupadd -r amavis
-getent passwd amavis > /dev/null || %{_sbindir}/useradd -r -g amavis -d /var/spool/amavisd -s /sbin/nologin -c "User for amavisd-new" amavis
-
-%preun
-if [ $1 -eq 0 ]; then
-  /sbin/service amavisd stop > /dev/null 2>&1 || :
-  /sbin/chkconfig --del amavisd
-  /sbin/service clamd.amavisd stop > /dev/null 2>&1 || :
-  /sbin/chkconfig --del clamd.amavisd
-fi
-
-%preun snmp
-if [ $1 -eq 0 ]; then
-  /sbin/service amavisd-snmp stop > /dev/null 2>&1 || :
-  /sbin/chkconfig --del amavisd-snmp
-fi
-
-%post
-/sbin/chkconfig --add clamd.amavisd
-/sbin/chkconfig --add amavisd
-
-%post snmp
-/sbin/chkconfig --add amavisd-snmp
-
-%postun
-if [ $1 -ne 0 ]; then
-  /sbin/service clamd.amavisd condrestart > /dev/null 2>&1 || :
-  /sbin/service amavisd condrestart > /dev/null 2>&1 || :
-fi
-
-%postun snmp
-if [ $1 -ne 0 ]; then
-  /sbin/service amavisd-snmp condrestart > /dev/null 2>&1 || :
-fi
-
-%files
-%defattr(-,root,root,-)
-%doc AAAREADME.first LDAP.schema LDAP.ldif LICENSE RELEASE_NOTES
-%doc README_FILES test-messages amavisd.conf-*
-%dir %{_sysconfdir}/amavisd/
-%attr(755,root,root) %{_initrddir}/amavisd
-%attr(755,root,root) %{_initrddir}/clamd.amavisd
-%config(noreplace) %{_sysconfdir}/amavisd/amavisd.conf
-%config(noreplace) %{_sysconfdir}/clamd.d/amavisd.conf
-%config(noreplace) %{_sysconfdir}/sysconfig/clamd.amavisd
-%config(noreplace) %{_sysconfdir}/cron.daily/amavisd
-%{_sbindir}/amavisd
-%{_sbindir}/clamd.amavisd
-%{_bindir}/amavisd-*
-%dir %attr(710,amavis,amavis) /var/spool/amavisd
-%dir %attr(700,amavis,amavis) /var/spool/amavisd/tmp
-%dir %attr(700,amavis,amavis) /var/spool/amavisd/db
-%dir %attr(700,amavis,amavis) /var/spool/amavisd/quarantine
-%ghost /var/spool/amavisd/clamd.sock
-%if 0%{?fedora}%{?rhel} > 6
-%attr(644,root,root) %{_sysconfdir}/tmpfiles.d/amavisd-new.conf
-%ghost %dir %attr(755,amavis,amavis) /var/run/amavisd
-%ghost %dir %attr(755,amavis,amavis) /var/run/clamd.amavisd
-%else
-%dir %attr(755,amavis,amavis) /var/run/amavisd
-%dir %attr(755,amavis,amavis) /var/run/clamd.amavisd
-%endif
-
-%files snmp
-%defattr(-,root,root,-)
-%doc AMAVIS-MIB.txt
-%attr(755,root,root) %{_initrddir}/amavisd-snmp
-%{_sbindir}/amavisd-snmp-subagent
-
-%changelog
-* Mon Dec 02 2013 Robert Scheck <robert@fedoraproject.org> 2.8.0-8
-- Commented ripole(1) decoder as the binary is not packaged
-- Commented tnef(1) decoder as the perl module is a dependency
-
-* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-7
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
-
-* Thu Jul 18 2013 Petr Pisar <ppisar@redhat.com> - 2.8.0-6
-- Perl 5.18 rebuild
-
-* Fri May 10 2013 Adam Williamson <awilliam@redhat.com> - 2.8.0-5
-- init_network.patch: don't source /etc/sysconfig/network in initscript
-
-* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
-
-* Fri Oct 19 2012 Robert Scheck <robert@fedoraproject.org> 2.8.0-3
-- Added requirements to lrzip and unzoo for unpacking
-
-* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
-
-* Sun Jul 08 2012 Robert Scheck <robert@fedoraproject.org> 2.8.0-1
-- Upgrade to 2.8.0
-
-* Fri Jun 29 2012 Robert Scheck <robert@fedoraproject.org> 2.6.6-3
-- Various minor spec file cleanups
-
-* Thu Jan 12 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.6-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
-
-* Sun Sep 18 2011 Steven Pritchard <steve@kspei.com> 2.6.6-1
-- Update to 2.6.6.
-- Make /var/spool/amavisd g+x (BZ 548234).
-- %%ghost /var/run/amavisd and add /etc/tmpfiles.d/amavisd-new-tmpfiles.conf
-  (BZ 656544, 676430, 710984, 734271).
-- Also add /var/run/clamd.amavisd (which seems to be a bug itself).  Fixes
-  BZ 696725.
-
-* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.4-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
-
-* Tue Nov  9 2010 Marcela Mašláňová <mmaslano@redhat.com> 2.6.4-2
-- 561389 patch from Sandro Janke - change stderr to stdout
-
-* Mon Aug 10 2009 Steven Pritchard <steve@kspei.com> 2.6.4-1
-- Update to 2.6.4.
-- Make a snmp sub-package for amavisd-snmp-subagent.
-
-* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.2-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
-
-* Sun Mar 01 2009 Robert Scheck <robert@fedoraproject.org> 2.6.2-3
-- Re-diffed amavisd-new configuration patch for no fuzz
-
-* Mon Feb 23 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.2-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
-
-* Wed Dec 17 2008 Steven Pritchard <steve@kspei.com> 2.6.2-1
-- Update to 2.6.2.
-- Drop smtpdaemon dependency (BZ# 438078).
-
-* Wed Jul 15 2008 Steven Pritchard <steve@kspei.com> 2.6.1-1
-- Update to 2.6.1.
-- Require Crypt::OpenSSL::RSA, Digest::SHA, Digest::SHA1, IO::Socket::SSL,
-  Mail::DKIM, Net::SSLeay, NetAddr::IP, and Socket6.
-
-* Mon Jul 14 2008 Tom "spot" Callaway <tcallawa@redhat.com> 2.5.2-3
-- fix license tag
-- fix db patch to apply with fuzz=0
-
-* Sun Aug 12 2007 Steven Pritchard <steve@kspei.com> 2.5.2-2
-- Fix pre/preun/post dependencies and improve scriptlets a bit.
-- Drop dependencies on DBD::mysql and Mail::SPF::Query.
-- Add dependencies on IO::Socket::INET6, Mail::SPF, and altermime.
-
-* Sun Jul 08 2007 Steven Pritchard <steve@kspei.com> 2.5.2-1
-- Update to 2.5.2.
-
-* Fri Jun 22 2007 Steven Pritchard <steve@kspei.com> 2.5.2-0.1.rc2
-- Update to 2.5.2-rc2.
-
-* Fri Jun 22 2007 Steven Pritchard <steve@kspei.com> 2.5.1-1
-- Update to 2.5.1.
-- Fix amavis-clamd.conf (bug #237252).
-- Update amavisd-conf.patch.
-- Require p7zip and tar.
-- Improve pre/preun/post scripts.
-
-* Thu Feb 22 2007 Steven Pritchard <steve@kspei.com> 2.4.5-1
-- Update to 2.4.5.
-
-* Mon Dec 18 2006 Steven Pritchard <steve@kspei.com> 2.4.4-2
-- Fix the path to amavisd.sock in amavisd-release.
-
-* Tue Dec 05 2006 Steven Pritchard <steve@kspei.com> 2.4.4-1
-- Update to 2.4.4.
-
-* Fri Dec 01 2006 Steven Pritchard <steve@kspei.com> 2.4.3-5
-- Add missing amavisd-release script.
-
-* Tue Nov 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-4
-- Rebuild.
-
-* Tue Nov 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-3
-- Add dependency on file. (#215492)
-
-* Sat Oct 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-2
-- Fix permissions on the cron.daily script.
-
-* Tue Oct 10 2006 Steven Pritchard <steve@kspei.com> 2.4.3-1
-- Update to 2.4.3.
-- Add quarantine directory and instructions for enabling it.
-- Add tmpwatch cron script.
-
-* Thu Sep 28 2006 Steven Pritchard <steve@kspei.com> 2.4.2-4
-- Drop lha dependency and add arj.
-
-* Sun Sep 17 2006 Steven Pritchard <steve@kspei.com> 2.4.2-3
-- Rebuild.
-
-* Wed Aug 02 2006 Steven Pritchard <steve@kspei.com> 2.4.2-2
-- Fix path to clamd socket in amavisd-conf.patch.
-
-* Mon Jul 31 2006 Steven Pritchard <steve@kspei.com> 2.4.2-1
-- Update to 2.4.2
-- Fix permissions on README.fedora (bug #200769)
-
-* Tue Jun 20 2006 Steven Pritchard <steve@kspei.com> 2.4.1-1
-- Update to 2.4.1
-- Drop zoo dependency due to Extras maintainer security concerns
-
-* Tue Apr 25 2006 Steven Pritchard <steve@kspei.com> 2.4.0-1
-- Update to 2.4.0
-
-* Thu Feb 02 2006 Steven Pritchard <steve@kspei.com> 2.3.3-5
-- Add dist to Release
-
-* Wed Sep 21 2005 Steven Pritchard <steve@kspei.com> 2.3.3-4
-- Add TODO and amavisd.conf-* to %%doc
-
-* Mon Sep 19 2005 Steven Pritchard <steve@kspei.com> 2.3.3-3
-- Add amavisd-db.patch to fix the path to the db directory in
-  amavisd-agent and amavisd-nanny.  (Thanks to Julien Tognazzi.)
-
-* Fri Sep 02 2005 Steven Pritchard <steve@kspei.com> 2.3.3-2
-- Requires: perl(Compress::Zlib) >= 1.35
-
-* Thu Sep 01 2005 Steven Pritchard <steve@kspei.com> 2.3.3-1
-- Update to 2.3.3
-- Remove explicit dependencies on core perl modules
-
-* Fri Aug 19 2005 Steven Pritchard <steve@kspei.com> 2.3.2-10
-- Recommend using 127.0.0.1 instead of localhost in README.fedora
-- .deb support requires ar
-
-* Wed Aug 17 2005 Steven Pritchard <steve@kspei.com> 2.3.2-9
-- Set $virus_admin, $mailfrom_notify_admin, $mailfrom_notify_recip,
-  and $mailfrom_notify_spamadmin to undef in the default config to
-  turn off notification emails
-
-* Fri Aug 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-8
-- Add dependencies for freeze, lzop, nomarch, zoo, cabextract
-
-* Wed Jul 27 2005 Steven Pritchard <steve@kspei.com> 2.3.2-7
-- Add README.fedora with simplified Postfix instructions
-
-* Mon Jul 25 2005 Steven Pritchard <steve@kspei.com> 2.3.2-6
-- Create /var/spool/amavisd/db
-
-* Thu Jul 21 2005 Steven Pritchard <steve@kspei.com> 2.3.2-5
-- Add perl(Mail::SPF::Query) (now packaged for Extras) dependency
-- Drop /var/log/amavisd since we weren't using it
-- Fix paths for clamd.sock and amavisd.pid in a couple of places
-
-* Tue Jul 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-4
-- Add a bunch of other missing Requires (both actually required modules
-  and optional modules)
-
-* Tue Jul 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-3
-- Add missing Requires: perl(Convert::TNEF)
-
-* Wed Jul 06 2005 Steven Pritchard <steve@kspei.com> 2.3.2-2
-- Fix init script ordering
-- Don't enable amavisd by default
-
-* Wed Jul 06 2005 Steven Pritchard <steve@kspei.com> 2.3.2-1
-- Update to 2.3.2
-
-* Wed Jun 29 2005 Steven Pritchard <steve@kspei.com> 2.3.2-0.1.rc1
-- Update to 2.3.2-rc1
-- Fedora Extras clamav integration
-- Drop amavisd-syslog.patch (Unix::Syslog is in Extras)
-
-* Mon Feb 23 2004 Steven Pritchard <steve@kspei.com> 0.20030616.p7-0.fdr.0.1
-- Add amavisd-syslog.patch to eliminate Unix::Syslog dependency
-- Add in clamd helper
-- Fix up init script
-- Initial package

amavisd-snmp.init

@@ -1,67 +0,0 @@
-#!/bin/sh
-#
-# amavisd-snmp:        Init script for amavisd-snmp-subagent
-#
-# chkconfig: - 79 31
-# description: Exports amavisd SNMP data
-# pidfile: /var/run/amavisd-snmp-subagent.pid
-
-# Source function library.
-. /etc/init.d/functions
-
-RETVAL=0
-
-start() {
-    echo -n $"Starting amavisd-snmp-subagent: "
-    [ $RETVAL -eq 0 ] && { daemon amavisd-snmp-subagent -P /var/run/amavisd-snmp-subagent.pid; RETVAL=$?; };
-    [ $RETVAL -eq 0 ] && { touch /var/lock/subsys/amavisd-snmp-subagent; RETVAL=$?; };
-    [ $RETVAL -eq 0 ] && echo_success || echo_failure
-    echo
-}
-
-stop() {
-    echo -n $"Shutting down amavisd-snmp-subagent: "
-    kill $( cat /var/run/amavisd-snmp-subagent.pid ) || RETVAL=1
-    [ $RETVAL -eq 0 ] && { rm -f /var/lock/subsys/amavisd-snmp-subagent; RETVAL=$?; };
-    [ $RETVAL -eq 0 ] && echo_success || echo_failure
-    echo
-}
-
-restart() {
-    stop
-    start
-}
-
-# See how we were called.
-case "$1" in
-    start)
-        start
-        ;;
-
-    stop)
-        stop
-        ;;
-
-    status)
-        status amavisd-snmp-subagent
-        ;;
-
-    reload)
-	restart
-	;;
-
-    restart)
-	restart
-        ;;
-
-    condrestart)
-        [ -f /var/lock/subsys/amavisd-snmp-subagent ] && restart || :
-        ;;
-
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-        exit 1
-esac
-
-exit $RETVAL
-

amavisd.cron

@@ -1,2 +0,0 @@
-/usr/sbin/tmpwatch 24 /var/spool/amavisd/tmp
-/usr/sbin/tmpwatch -d 720 /var/spool/amavisd/quarantine

dead.package

@@ -0,0 +1 @@
+Renamed to amavis

sources

@@ -1 +0,0 @@
-9851ce19f0c8fcab36f254c4e0251618  amavisd-new-2.8.0.tar.gz