Remove lrzip

Conflicts:
	amavisd-new.spec

.gitignore

@@ -0,0 +1,3 @@
+amavisd-new-2.8.0.tar.gz
+/amavisd-new-2.9.0.tar.xz
+/amavisd-new-2.9.1.tar.xz

README.fedora

@@ -0,0 +1,68 @@
+INSTALLATION
+------------
+Installing amavisd-new from Fedora is simple.  First, install the
+amavisd-new package:
+
+  yum -y install amavisd-new
+
+Don't be alarmed at the number of dependencies this installs.  This
+package tries to be as full-featured as possible, including many
+optional components for amavisd-new.
+
+Next, configure amavisd-new to start on boot:
+
+  chkconfig --level 2345 amavisd on
+
+If you want to use the Clam Antivirus daemon (recommended), set it to
+start on boot as well:
+
+  chkconfig --level 2345 clamd.amavisd on
+
+When you are ready, start the clamd.amavisd (optional but recommended)
+and amavisd services:
+
+  service clamd.amavisd start
+  service amavisd start
+
+Check /var/log/maillog for startup messages from both daemons.
+
+The next step is to integrate amavisd with your MTA.
+
+POSTFIX
+-------
+The simplest method for enabling amavisd-new support in postfix is to
+use the content_filter configuration option to tell postfix to relay
+mail through amavisd-new using SMTP.  In this configuration, incoming
+mail passes from postfix to amavisd and back to postfix.  (Mail never
+actually leaves the control of postfix however, since amavisd does not
+answer OK until it scans the message and transfers it back to postfix.
+The worst that can happen is a failure at just the right time could
+allow a message to be queued twice.)
+
+Add the following to /etc/postfix/main.cf:
+
+  content_filter = smtp:[127.0.0.1]:10024
+
+You will probably also want to limit the number of postfix processes
+to keep mail from coming in faster than it can be processed by adding
+the following to /etc/postfix/main.cf:
+
+  default_process_limit = 20
+
+Add the following to /etc/postfix/master.cf:
+
+  127.0.0.1:10025 inet n - - - 0 smtpd -o content_filter=
+
+Be sure to read the TUNING section in README.postfix for information
+on process limits.
+
+SENDMAIL
+--------
+See README.sendmail* in this directory.
+
+Please note that amavisd-new's milter functionality is not enabled in
+this package.
+
+EXIM
+----
+See README.exim* in this directory.

README.quarantine

@@ -0,0 +1,24 @@
+To enable quarantine support simply change the following line in
+/etc/amavisd/amavisd.conf:
+
+  $QUARANTINEDIR = undef;      # -Q
+
+to
+
+  $QUARANTINEDIR = "$MYHOME/quarantine";      # -Q
+
+then restart amavisd.
+
+The following will make the change for you:
+
+  sed -i.orig -e '/\$QUARANTINEDIR =/s,undef,"$MYHOME/quarantine",' \
+      /etc/amavisd/amavisd.conf
+
+PLEASE NOTE:  This is intentionally a manual step.  Before turning on
+the quarantine feature of amavisd-new, be sure that there is a
+sufficient amount of free space on /var/spool/amavisd/quarantine.
+"Sufficient" depends entirely on your environment.
+
+In the default configuration, files in the quarantine directory will
+be automatically deleted by tmpwatch after 30 days.  See
+/etc/cron.daily/amavisd to adjust this behavior for your environment.

amavis-clamd.conf

@@ -0,0 +1,20 @@
+# Use system logger.
+LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+LogFacility LOG_MAIL
+
+# This option allows you to save a process identifier of the listening
+# daemon (main thread).
+PidFile /var/run/amavisd/clamd.pid
+
+# Remove stale socket after unclean shutdown.
+# Default: disabled
+FixStaleSocket yes
+
+# Run as a selected user (clamd must be started by root).
+User amavis
+
+# Path to a local socket file the daemon will listen on.
+LocalSocket /var/spool/amavisd/clamd.sock

amavis-clamd.init

@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+# chkconfig: - 78 32
+# description: The clamd server running for amavisd
+
+CLAMD_SERVICE=amavisd
+. /usr/share/clamav/clamd-wrapper

amavis-clamd.sysconfig

@@ -0,0 +1,3 @@
+CLAMD_CONFIGFILE=/etc/clamd.d/amavisd.conf
+CLAMD_SOCKET=/var/spool/amavisd/clamd.sock
+CLAMD_OPTIONS=

amavisd-condrestart.patch

@@ -0,0 +1,16 @@
+--- amavisd_init.sh.orig	2004-02-23 16:09:02.000000000 -0600
++++ amavisd_init.sh	2004-02-23 16:13:52.000000000 -0600
+@@ -60,8 +60,12 @@
+ 	action $"Reloading ${prog_base}:" ${prog} -c ${prog_config_file} reload
+ 	RETVAL=$?
+ 	;;
++  condrestart)
++	[ -f /var/lock/subsys/${prog_base} ] && $0 restart || :
++	RETVAL=$?
++	;;
+   *)
+-	echo "Usage: $0 {start|stop|status|restart|reload}"
++	echo "Usage: $0 {start|stop|status|restart|reload|condrestart}"
+ 	exit 1
+ esac
+ 

amavisd-init.patch

@@ -0,0 +1,24 @@
+--- amavisd-new-2.3.2.orig/amavisd_init.sh	2002-11-15 22:22:47.000000000 -0600
++++ amavisd-new-2.3.2/amavisd_init.sh	2005-07-06 16:11:23.000000000 -0500
+@@ -4,10 +4,10 @@
+ #		(to be used with version amavisd-new-20020630 or later)
+ #
+ 
+-# chkconfig: 2345 79 31
++# chkconfig: - 79 31
+ # description: amavisd is an interface between MTA and content checkers
+ # processname: amavisd
+-# pidfile: /var/amavis/amavisd.pid
++# pidfile: /var/run/amavisd/amavisd.pid
+ 
+ # Source function library.
+ . /etc/rc.d/init.d/functions
+@@ -19,7 +19,7 @@
+ prog="/usr/sbin/amavisd"
+ prog_base="$(basename ${prog})"
+ 
+-prog_config_file="/etc/amavisd.conf"
++prog_config_file="/etc/amavisd/amavisd.conf"
+ 
+ # Source configuration.
+ [ -e /etc/sysconfig/${prog_base} ] && . /etc/sysconfig/${prog_base}

amavisd-new-2.6.4-stdout.patch

@@ -0,0 +1,21 @@
+diff -up amavisd-new-2.6.4/amavisd.err amavisd-new-2.6.4/amavisd
+--- amavisd-new-2.6.4/amavisd.err	2010-11-09 09:24:54.065896574 +0100
++++ amavisd-new-2.6.4/amavisd	2010-11-09 09:25:59.192229627 +0100
+@@ -14014,14 +14014,14 @@ eval {
+     my($msg) = !defined($killed_amavisd_pid) ? undef :
+                "Daemon [$killed_amavisd_pid] terminated by SIG$kill_sig_used";
+     if ($cmd eq 'stop') {
+-      if (defined $msg) { do_log(2,"%s",$msg); print STDERR "$msg\n" }
++      if (defined $msg) { do_log(2,"%s",$msg); print STDOUT "$msg\n" }
+       exit(0);
+     }
+     if (defined $killed_amavisd_pid) {
+-      print STDERR "$msg, waiting for dust to settle...\n";
++      print STDOUT "$msg, waiting for dust to settle...\n";
+       sleep 5;  # wait for the TCP socket to be released
+     }
+-    print STDERR "becoming a new daemon...\n";
++    print STDOUT "becoming a new daemon...\n";
+   }
+   1;
+ } or do {

amavisd-new-2.8.0-init_network.patch

@@ -0,0 +1,13 @@
+--- amavisd-new-2.8.0/amavisd_init.sh	2002-11-15 20:22:47.000000000 -0800
++++ amavisd-new-2.8.0/amavisd_init.sh.new	2013-05-10 09:54:58.849116467 -0700
+@@ -12,8 +12,8 @@
+ # Source function library.
+ . /etc/rc.d/init.d/functions
+ 
+-# Source networking configuration.
+-. /etc/sysconfig/network
++## Source networking configuration.
++#. /etc/sysconfig/network
+ 
+ #prog="/opt/amavisd-new/sbin/amavisd"
+ prog="/usr/sbin/amavisd"

amavisd-new-2.9.1-conf.patch

@@ -0,0 +1,158 @@
+From 81c7c660e6e0620c6616c0c7acc6064cb482117f Mon Sep 17 00:00:00 2001
+From: Juan Orti Alcaine <j.orti.alcaine@gmail.com>
+Date: Tue, 12 Dec 2017 14:48:37 +0100
+Subject: [PATCH] amavisd-new-2.9.1-conf.patch
+
+---
+ amavisd-agent |  2 +-
+ amavisd-nanny |  2 +-
+ amavisd.conf  | 58 +++++++++++++++++++++++++++++-----------------------------
+ 3 files changed, 31 insertions(+), 31 deletions(-)
+
+diff --git a/amavisd-agent b/amavisd-agent
+index 1ebe2bb..b8271a3 100755
+--- a/amavisd-agent
++++ b/amavisd-agent
+@@ -53,7 +53,7 @@ use BerkeleyDB;
+ 
+ my($dbfile) = 'snmp.db';
+ my($db_home) =  # DB databases directory
+-  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/amavis/db';
++  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/spool/amavisd/db';
+ 
+ my($wakeuptime) = 10;  # -w, sleep time in seconds, may be fractional
+ my($repeatcount);      # -c, repeat count (when defined)
+diff --git a/amavisd-nanny b/amavisd-nanny
+index 80b84dc..164549f 100755
+--- a/amavisd-nanny
++++ b/amavisd-nanny
+@@ -61,7 +61,7 @@ my($activettl) = 10*60; # stuck active children are sent a SIGTERM
+ 
+ my($dbfile) = 'nanny.db';
+ my($db_home) =  # DB databases directory
+-  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/amavis/db';
++  defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/spool/amavisd/db';
+ my($wakeuptime) = 2;  # -w, sleep time in seconds, may be fractional
+ my($repeatcount);     # -c, repeat count (when defined)
+ 
+diff --git a/amavisd.conf b/amavisd.conf
+index a09597f..13e9199 100644
+--- a/amavisd.conf
++++ b/amavisd.conf
+@@ -14,25 +14,25 @@ use strict;
+ # $bypass_decode_parts = 1;         # controls running of decoders&dearchivers
+ 
+ $max_servers = 2;            # num of pre-forked children (2..30 is common), -m
+-$daemon_user  = 'vscan';     # (no default;  customary: vscan or amavis), -u
+-$daemon_group = 'vscan';     # (no default;  customary: vscan or amavis), -g
++$daemon_user  = 'amavis';    # (no default;  customary: vscan or amavis), -u
++$daemon_group = 'amavis';    # (no default;  customary: vscan or amavis), -g
+ 
+ $mydomain = 'example.com';   # a convenient default for other settings
+ 
+-# $MYHOME = '/var/amavis';   # a convenient default for other settings, -H
++$MYHOME = '/var/spool/amavisd';   # a convenient default for other settings, -H
+ $TEMPBASE = "$MYHOME/tmp";   # working directory, needs to exist, -T
+ $ENV{TMPDIR} = $TEMPBASE;    # environment variable TMPDIR, used by SA, etc.
+-$QUARANTINEDIR = '/var/virusmails';  # -Q
++$QUARANTINEDIR = undef;      # -Q
+ # $quarantine_subdir_levels = 1;  # add level of subdirs to disperse quarantine
+ # $release_format = 'resend';     # 'attach', 'plain', 'resend'
+ # $report_format  = 'arf';        # 'attach', 'plain', 'resend', 'arf'
+ 
+ # $daemon_chroot_dir = $MYHOME;   # chroot directory or undef, -R
+ 
+-# $db_home   = "$MYHOME/db";      # dir for bdb nanny/cache/snmp databases, -D
++$db_home   = "$MYHOME/db";        # dir for bdb nanny/cache/snmp databases, -D
+ # $helpers_home = "$MYHOME/var";  # working directory for SpamAssassin, -S
+-# $lock_file = "$MYHOME/var/amavisd.lock";  # -L
+-# $pid_file  = "$MYHOME/var/amavisd.pid";   # -P
++$lock_file = "/var/run/amavisd/amavisd.lock";  # -L
++$pid_file  = "/var/run/amavisd/amavisd.pid";   # -P
+ #NOTE: create directories $MYHOME/tmp, $MYHOME/var, $MYHOME/db manually
+ 
+ $log_level = 0;              # verbosity 0..5, -d
+@@ -116,11 +116,11 @@ $sa_local_tests_only = 0;    # only tests which do not require internet access?
+ # $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
+ #   defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
+ 
+-$virus_admin               = "virusalert\@$mydomain";  # notifications recip.
++$virus_admin               = undef;                    # notifications recip.
+ 
+-$mailfrom_notify_admin     = "virusalert\@$mydomain";  # notifications sender
+-$mailfrom_notify_recip     = "virusalert\@$mydomain";  # notifications sender
+-$mailfrom_notify_spamadmin = "spam.police\@$mydomain"; # notifications sender
++$mailfrom_notify_admin     = undef;                    # notifications sender
++$mailfrom_notify_recip     = undef;                    # notifications sender
++$mailfrom_notify_spamadmin = undef;                    # notifications sender
+ $mailfrom_to_quarantine = ''; # null return path; uses original sender if undef
+ 
+ @addr_extension_virus_maps      = ('virus');
+@@ -154,10 +154,10 @@ $defang_by_ccat{CC_BADH.",6"} = 1;  # header field syntax error
+ # $notify_method  = 'smtp:[127.0.0.1]:10025';
+ # $forward_method = 'smtp:[127.0.0.1]:10025';  # set to undef with milter!
+ 
+-# $final_virus_destiny      = D_DISCARD;
+-# $final_banned_destiny     = D_DISCARD;
+-# $final_spam_destiny       = D_PASS;  #!!!  D_DISCARD / D_REJECT
+-# $final_bad_header_destiny = D_PASS;
++$final_virus_destiny      = D_DISCARD;
++$final_banned_destiny     = D_BOUNCE;
++$final_spam_destiny       = D_DISCARD;  #!!!  D_DISCARD / D_REJECT
++$final_bad_header_destiny = D_BOUNCE;
+ # $bad_header_quarantine_method = undef;
+ 
+ # $os_fingerprint_method = 'p0f:*:2345';  # to query p0f-analyzer.pl
+@@ -326,8 +326,8 @@ $banned_filename_re = new_RE(
+   ['lzma', \&do_uncompress,
+            ['lzmadec', 'xz -dc --format=lzma',
+             'lzma -dc', 'unlzma -c', 'lzcat', 'lzmadec'] ],
+-  ['lrz',  \&do_uncompress,
+-           ['lrzip -q -k -d -o -', 'lrzcat -q -k'] ],
++#  ['lrz',  \&do_uncompress,
++#           ['lrzip -q -k -d -o -', 'lrzcat -q -k'] ],
+   ['lzo',  \&do_uncompress, 'lzop -d'],
+   ['rpm',  \&do_uncompress, ['rpm2cpio.pl', 'rpm2cpio'] ],
+   [['cpio','tar'], \&do_pax_cpio, ['pax', 'gcpio', 'cpio'] ],
+@@ -338,9 +338,9 @@ $banned_filename_re = new_RE(
+   ['arj',  \&do_unarj, ['unarj', 'arj'] ],
+   ['arc',  \&do_arc,   ['nomarch', 'arc'] ],
+   ['zoo',  \&do_zoo,   ['zoo', 'unzoo'] ],
+-  ['doc',  \&do_ole,   'ripole'],
++# ['doc',  \&do_ole,   'ripole'],  # no ripole package so far
+   ['cab',  \&do_cabextract, 'cabextract'],
+-  ['tnef', \&do_tnef_ext, 'tnef'],
++# ['tnef', \&do_tnef_ext, 'tnef'],  # use internal do_tnef() instead
+   ['tnef', \&do_tnef],
+ # ['lha',  \&do_lha,   'lha'],  # not safe, use 7z instead
+ # ['sit',  \&do_unstuff, 'unstuff'],  # not safe
+@@ -378,16 +378,16 @@ $banned_filename_re = new_RE(
+ #   qr/^(?:310|420)[,\s]*(?:.* <<< )?(.+?)(?: ; |$)/m ],
+ # settings for the SAVAPI3.conf: ArchiveScan=1, HeurLevel=2, MailboxScan=1
+ 
+-# ### http://www.clamav.net/
+-# ['ClamAV-clamd',
+-#   \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
+-#   qr/\bOK$/m, qr/\bFOUND$/m,
+-#   qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
+-# # NOTE: run clamd under the same user as amavisd - or run it under its own
+-# #   uid such as clamav, add user clamav to the amavis group, and then add
+-# #   AllowSupplementaryGroups to clamd.conf;
+-# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
+-# #   this entry; when running chrooted one may prefer a socket under $MYHOME.
++  ### http://www.clamav.net/
++  ['ClamAV-clamd',
++    \&ask_daemon, ["CONTSCAN {}\n", "/var/spool/amavisd/clamd.sock"],
++    qr/\bOK$/m, qr/\bFOUND$/m,
++    qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
++  # NOTE: run clamd under the same user as amavisd - or run it under its own
++  #   uid such as clamav, add user clamav to the amavis group, and then add
++  #   AllowSupplementaryGroups to clamd.conf;
++  # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
++  #   this entry; when running chrooted one may prefer a socket under $MYHOME.
+ 
+ # ### http://www.clamav.net/ and CPAN  (memory-hungry! clamd is preferred)
+ # # note that Mail::ClamAV requires perl to be build with threading!
+-- 
+2.14.3
+

amavisd-new-2.9.1-release_mail_from_sql_quarantine.patch

@@ -0,0 +1,51 @@
+diff --git a/amavisd b/amavisd
+index f721756..2a2c418 100755
+--- a/amavisd
++++ b/amavisd
+@@ -20208,7 +20208,7 @@ sub preprocess_policy_query($$) {
+     new_am_id('rel-'.$msginfo->mail_id)  if $releasing;
+     if ($releasing && $quar_type eq 'Q') {  # releasing from SQL
+       do_log(5, "preprocess_policy_query: opening in sql: %s",
+-                $msginfo->mail_id);
++                $msginfo->parent_mail_id);
+       my $obj = $Amavis::sql_storage;
+       $Amavis::extra_code_sql_quar && $obj
+         or die "SQL quarantine code not enabled (3)";
+@@ -20218,31 +20218,31 @@ sub preprocess_policy_query($$) {
+       if (!defined($msginfo->partition_tag) &&
+           defined($sel_msg) && $sel_msg ne '') {
+         do_log(5, "preprocess_policy_query: missing partition_tag in request,".
+-                  " fetching msgs record for mail_id=%s", $msginfo->mail_id);
++                  " fetching msgs record for mail_id=%s", $msginfo->parent_mail_id);
+         # find a corresponding partition_tag if missing from a release request
+         $conn_h->begin_work_nontransaction;  #(re)connect if necessary
+-        $conn_h->execute($sel_msg, untaint($msginfo->mail_id));
++        $conn_h->execute($sel_msg, untaint($msginfo->parent_mail_id));
+         my $a_ref; my $cnt = 0; my $partition_tag;
+         while ( defined($a_ref=$conn_h->fetchrow_arrayref($sel_msg)) ) {
+           $cnt++;
+           $partition_tag = $a_ref->[0]  if !defined $partition_tag;
+           ll(5) && do_log(5, "release: got msgs record for mail_id=%s: %s",
+-                             $msginfo->mail_id, join(', ',@$a_ref));
++                             $msginfo->parent_mail_id, join(', ',@$a_ref));
+         }
+         $conn_h->finish($sel_msg)  if defined $a_ref;  # only if not all read
+         $cnt <= 1 or die "Multiple ($cnt) records with same mail_id exist, ".
+                          "specify a partition_tag in the AM.PDP request";
+         if ($cnt < 1) {
+           do_log(0, "release: no records with msgs.mail_id=%s in a database, ".
+-                    "trying to read from a quar. anyway", $msginfo->mail_id);
++                    "trying to read from a quar. anyway", $msginfo->parent_mail_id);
+         }
+         $msginfo->partition_tag($partition_tag);  # could still be undef/NULL !
+       }
+       ll(5) && do_log(5, "release: opening mail_id=%s, partition_tag=%s",
+-                         $msginfo->mail_id, $msginfo->partition_tag);
++                         $msginfo->parent_mail_id, $msginfo->partition_tag);
+       $conn_h->begin_work_nontransaction;  # (re)connect if not connected
+       $fh = Amavis::IO::SQL->new;
+-      $fh->open($conn_h, $sel_quar, untaint($msginfo->mail_id),
++      $fh->open($conn_h, $sel_quar, untaint($msginfo->parent_mail_id),
+                 'r', untaint($msginfo->partition_tag))
+         or die "Can't open sql obj for reading: $!";  1;
+     } else {  # mail checking or releasing from a file

amavisd-new-tmpfiles.conf

@@ -0,0 +1,2 @@
+d /var/run/amavisd 755 amavis amavis -
+d /var/run/clamd.amavisd 755 amavis amavis -

amavisd-new.spec

@@ -0,0 +1,450 @@
+#%%define prerelease rc2
+
+Summary:        Email filter with virus scanner and spamassassin support
+Name:           amavisd-new
+Version:        2.9.1
+Release:        3%{?prerelease:.%{prerelease}}%{?dist}
+# LDAP schema is GFDL, some helpers are BSD, core is GPLv2+
+License:        GPLv2+ and BSD and GFDL
+Group:          Applications/System
+URL:            http://www.ijs.si/software/amavisd/
+Source0:        http://www.ijs.si/software/amavisd/amavisd-new-%{version}%{?prerelease:-%{prerelease}}.tar.xz
+Source1:        amavis-clamd.init
+Source2:        amavis-clamd.conf
+Source3:        amavis-clamd.sysconfig
+Source4:        README.fedora
+Source5:        README.quarantine
+Source6:        amavisd.cron
+Source7:        amavisd-snmp.init
+Source8:        amavisd-new-tmpfiles.conf
+Patch0:         amavisd-new-2.9.1-conf.patch
+Patch1:         amavisd-init.patch
+Patch2:         amavisd-condrestart.patch
+# Don't source /etc/sysconfig/network in init script; the network check
+# is commented out upstream so there's no apparent reason to source it,
+# and it can't be relied upon to exist in recent Fedora builds. Mail
+# sent upstream to amavis-users ML 2013-05-10. -adamw
+Patch3:         amavisd-new-2.8.0-init_network.patch
+# Fix bug #1121552
+# http://lists.amavis.org/pipermail/amavis-users/2014-June/002957.html
+Patch4:         amavisd-new-2.9.1-release_mail_from_sql_quarantine.patch
+BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Requires:       clamd
+Requires:       tmpwatch
+Requires:       crontabs
+Requires:       binutils
+Requires:       altermime
+Requires:       arj
+Requires:       bzip2
+Requires:       cabextract
+Requires:       cpio
+Requires:       file
+Requires:       freeze
+Requires:       gzip
+Requires:       lzop
+Requires:       nomarch
+Requires:       p7zip, p7zip-plugins
+Requires:       tar
+Requires:       unzoo
+# We probably should parse the fetch_modules() code in amavisd for this list.
+# These are just the dependencies that don't get picked up otherwise.
+Requires:       perl(Archive::Tar)
+Requires:       perl(Archive::Zip)
+Requires:       perl(Authen::SASL)
+Requires:       perl(Compress::Zlib) >= 1.35
+Requires:       perl(Convert::TNEF)
+Requires:       perl(Convert::UUlib)
+Requires:       perl(Crypt::OpenSSL::RSA)
+Requires:       perl(DBD::SQLite)
+Requires:       perl(DBI)
+Requires:       perl(Digest::SHA)
+Requires:       perl(Digest::SHA1)
+Requires:       perl(IO::Socket::INET6)
+Requires:       perl(IO::Socket::SSL)
+Requires:       perl(IO::Stringy)
+Requires:       perl(MIME::Body)
+Requires:       perl(MIME::Decoder::Base64)
+Requires:       perl(MIME::Decoder::Binary)
+Requires:       perl(MIME::Decoder::Gzip64)
+Requires:       perl(MIME::Decoder::NBit)
+Requires:       perl(MIME::Decoder::QuotedPrint)
+Requires:       perl(MIME::Decoder::UU)
+Requires:       perl(MIME::Head)
+Requires:       perl(Mail::DKIM)
+Requires:       perl(Mail::Field)
+Requires:       perl(Mail::Header)
+Requires:       perl(Mail::Internet)
+Requires:       perl(Mail::SPF)
+Requires:       perl(Mail::SpamAssassin)
+Requires:       perl(Net::DNS)
+Requires:       perl(Net::LDAP)
+Requires:       perl(Net::SSLeay)
+Requires:       perl(Net::Server)
+Requires:       perl(NetAddr::IP)
+Requires:       perl(Razor2::Client::Version)
+Requires:       perl(Socket6)
+Requires:       perl(Unix::Syslog)
+Requires:       perl(URI)
+Requires(pre):  shadow-utils
+Requires(post): /sbin/chkconfig
+Requires(preun): /sbin/service, /sbin/chkconfig
+Requires(postun): /sbin/service
+BuildArch:      noarch
+
+%package snmp
+Group:          Applications/System
+Summary:        Exports amavisd SNMP data
+Requires:       %{name} = %{version}-%{release}
+Requires:       perl(NetSNMP::OID)
+Requires(post): /sbin/chkconfig
+Requires(preun): /sbin/service, /sbin/chkconfig
+Requires(postun): /sbin/service
+
+%description
+amavisd-new is a high-performance and reliable interface between mailer
+(MTA) and one or more content checkers: virus scanners, and/or
+Mail::SpamAssassin Perl module. It is written in Perl, assuring high
+reliability, portability and maintainability. It talks to MTA via (E)SMTP
+or LMTP, or by using helper programs. No timing gaps exist in the design
+which could cause a mail loss.
+
+%description snmp
+This package contains the program amavisd-snmp-subagent, which can be
+used as a SNMP AgentX, exporting amavisd statistical counters database
+(snmp.db) as well as a child process status database (nanny.db) to a
+SNMP daemon supporting the AgentX protocol (RFC 2741), such as NET-SNMP.
+
+It is similar to combined existing utility programs amavisd-agent and
+amavisd-nanny, but instead of writing results as text to stdout, it
+exports data to a SNMP server running on a host (same or remote), making
+them available to SNMP clients (such a Cacti or mrtg) for monitoring or
+alerting purposes.
+
+%prep
+%setup -q -n %{name}-%{version}%{?prerelease:-%{prerelease}}
+%patch0 -p1
+%patch1 -p1
+%patch2 -p0
+%patch3 -p1
+%patch4 -p1
+
+install -p -m 644 %{SOURCE4} %{SOURCE5} README_FILES/
+sed -e 's,/var/amavis/amavisd.sock\>,%{_localstatedir}/spool/amavisd/amavisd.sock,' -i amavisd-release
+
+%build
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+install -D -p -m 755 amavisd $RPM_BUILD_ROOT%{_sbindir}/amavisd
+install -D -p -m 755 amavisd-snmp-subagent $RPM_BUILD_ROOT%{_sbindir}/amavisd-snmp-subagent
+ln -sf clamd $RPM_BUILD_ROOT%{_sbindir}/clamd.amavisd
+
+mkdir -p $RPM_BUILD_ROOT%{_bindir}
+install -p -m 755 amavisd-{agent,nanny,release} $RPM_BUILD_ROOT%{_bindir}/
+
+install -D -p -m 755 amavisd_init.sh $RPM_BUILD_ROOT%{_initrddir}/amavisd
+install -D -p -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_initrddir}/clamd.amavisd
+install -D -p -m 755 %{SOURCE7} $RPM_BUILD_ROOT%{_initrddir}/amavisd-snmp
+
+install -D -p -m 644 amavisd.conf $RPM_BUILD_ROOT%{_sysconfdir}/amavisd/amavisd.conf
+install -D -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/clamd.d/amavisd.conf
+install -D -p -m 644 %{SOURCE3} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/clamd.amavisd
+install -D -p -m 755 %{SOURCE6} $RPM_BUILD_ROOT%{_sysconfdir}/cron.daily/amavisd
+
+mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/spool/amavisd/{tmp,db,quarantine}
+touch $RPM_BUILD_ROOT%{_localstatedir}/spool/amavisd/clamd.sock
+mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/run/{amavisd,clamd.amavisd}
+
+%if 0%{?fedora}%{?rhel} > 6
+install -D -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/tmpfiles.d/amavisd-new.conf
+%endif
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%pre
+getent group amavis > /dev/null || %{_sbindir}/groupadd -r amavis
+getent passwd amavis > /dev/null || %{_sbindir}/useradd -r -g amavis -d %{_localstatedir}/spool/amavisd -s /sbin/nologin -c "User for amavisd-new" amavis
+
+%preun
+if [ $1 -eq 0 ]; then
+  /sbin/service amavisd stop > /dev/null 2>&1 || :
+  /sbin/chkconfig --del amavisd
+  /sbin/service clamd.amavisd stop > /dev/null 2>&1 || :
+  /sbin/chkconfig --del clamd.amavisd
+fi
+
+%preun snmp
+if [ $1 -eq 0 ]; then
+  /sbin/service amavisd-snmp stop > /dev/null 2>&1 || :
+  /sbin/chkconfig --del amavisd-snmp
+fi
+
+%post
+/sbin/chkconfig --add clamd.amavisd
+/sbin/chkconfig --add amavisd
+
+%post snmp
+/sbin/chkconfig --add amavisd-snmp
+
+%postun
+if [ $1 -ne 0 ]; then
+  /sbin/service clamd.amavisd condrestart > /dev/null 2>&1 || :
+  /sbin/service amavisd condrestart > /dev/null 2>&1 || :
+fi
+
+%postun snmp
+if [ $1 -ne 0 ]; then
+  /sbin/service amavisd-snmp condrestart > /dev/null 2>&1 || :
+fi
+
+%files
+%doc AAAREADME.first LDAP.schema LDAP.ldif LICENSE RELEASE_NOTES
+%doc README_FILES test-messages amavisd.conf-*
+%dir %{_sysconfdir}/amavisd/
+%attr(755,root,root) %{_initrddir}/amavisd
+%attr(755,root,root) %{_initrddir}/clamd.amavisd
+%config(noreplace) %{_sysconfdir}/amavisd/amavisd.conf
+%config(noreplace) %{_sysconfdir}/clamd.d/amavisd.conf
+%config(noreplace) %{_sysconfdir}/sysconfig/clamd.amavisd
+%config(noreplace) %{_sysconfdir}/cron.daily/amavisd
+%{_sbindir}/amavisd
+%{_sbindir}/clamd.amavisd
+%{_bindir}/amavisd-*
+%dir %attr(750,amavis,amavis) %{_localstatedir}/spool/amavisd
+%dir %attr(750,amavis,amavis) %{_localstatedir}/spool/amavisd/tmp
+%dir %attr(750,amavis,amavis) %{_localstatedir}/spool/amavisd/db
+%dir %attr(750,amavis,amavis) %{_localstatedir}/spool/amavisd/quarantine
+%ghost %{_localstatedir}/spool/amavisd/clamd.sock
+%if 0%{?fedora}%{?rhel} > 6
+%attr(644,root,root) %{_sysconfdir}/tmpfiles.d/amavisd-new.conf
+%ghost %dir %attr(755,amavis,amavis) %{_localstatedir}/run/amavisd
+%ghost %dir %attr(755,amavis,amavis) %{_localstatedir}/run/clamd.amavisd
+%else
+%dir %attr(755,amavis,amavis) %{_localstatedir}/run/amavisd
+%dir %attr(755,amavis,amavis) %{_localstatedir}/run/clamd.amavisd
+%endif
+
+%files snmp
+%doc AMAVIS-MIB.txt
+%attr(755,root,root) %{_initrddir}/amavisd-snmp
+%{_sbindir}/amavisd-snmp-subagent
+
+%changelog
+* Tue Dec 12 2017 Juan Orti Alcaine <jorti@fedoraproject.org> 2.9.1-3
+- Remove lrzip
+
+* Sun Aug 03 2014 Juan Orti Alcaine <jorti@fedoraproject.org> 2.9.1-2
+- Add patch to fix releasing mail from sql quarantine
+
+* Sat Jun 28 2014 Juan Orti Alcaine <jorti@fedoraproject.org> 2.9.1-1
+- Update to 2.9.1
+
+* Fri Jun 27 2014 Juan Orti Alcaine <jorti@fedoraproject.org> 2.9.0-2
+- Change permissions of /var/spool/amavisd folders to 750. Fix bug #906396
+
+* Thu Jun 26 2014 Juan Orti Alcaine <jorti@fedoraproject.org> - 2.9.0-1
+- Update to version 2.9.0
+- Rework amavisd-new-2.9.0-conf.patch
+- Fix missing dependencies
+
+* Mon Dec 02 2013 Robert Scheck <robert@fedoraproject.org> 2.8.0-8
+- Commented ripole(1) decoder as the binary is not packaged
+- Commented tnef(1) decoder as the perl module is a dependency
+
+* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Thu Jul 18 2013 Petr Pisar <ppisar@redhat.com> - 2.8.0-6
+- Perl 5.18 rebuild
+
+* Fri May 10 2013 Adam Williamson <awilliam@redhat.com> - 2.8.0-5
+- init_network.patch: don't source /etc/sysconfig/network in initscript
+
+* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Fri Oct 19 2012 Robert Scheck <robert@fedoraproject.org> 2.8.0-3
+- Added requirements to lrzip and unzoo for unpacking
+
+* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.8.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Sun Jul 08 2012 Robert Scheck <robert@fedoraproject.org> 2.8.0-1
+- Upgrade to 2.8.0
+
+* Fri Jun 29 2012 Robert Scheck <robert@fedoraproject.org> 2.6.6-3
+- Various minor spec file cleanups
+
+* Thu Jan 12 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.6-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Sun Sep 18 2011 Steven Pritchard <steve@kspei.com> 2.6.6-1
+- Update to 2.6.6.
+- Make /var/spool/amavisd g+x (BZ 548234).
+- %%ghost /var/run/amavisd and add /etc/tmpfiles.d/amavisd-new-tmpfiles.conf
+  (BZ 656544, 676430, 710984, 734271).
+- Also add /var/run/clamd.amavisd (which seems to be a bug itself).  Fixes
+  BZ 696725.
+
+* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.4-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Tue Nov  9 2010 Marcela Mašláňová <mmaslano@redhat.com> 2.6.4-2
+- 561389 patch from Sandro Janke - change stderr to stdout
+
+* Mon Aug 10 2009 Steven Pritchard <steve@kspei.com> 2.6.4-1
+- Update to 2.6.4.
+- Make a snmp sub-package for amavisd-snmp-subagent.
+
+* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.2-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Sun Mar 01 2009 Robert Scheck <robert@fedoraproject.org> 2.6.2-3
+- Re-diffed amavisd-new configuration patch for no fuzz
+
+* Mon Feb 23 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Wed Dec 17 2008 Steven Pritchard <steve@kspei.com> 2.6.2-1
+- Update to 2.6.2.
+- Drop smtpdaemon dependency (BZ# 438078).
+
+* Tue Jul 15 2008 Steven Pritchard <steve@kspei.com> 2.6.1-1
+- Update to 2.6.1.
+- Require Crypt::OpenSSL::RSA, Digest::SHA, Digest::SHA1, IO::Socket::SSL,
+  Mail::DKIM, Net::SSLeay, NetAddr::IP, and Socket6.
+
+* Mon Jul 14 2008 Tom "spot" Callaway <tcallawa@redhat.com> 2.5.2-3
+- fix license tag
+- fix db patch to apply with fuzz=0
+
+* Sun Aug 12 2007 Steven Pritchard <steve@kspei.com> 2.5.2-2
+- Fix pre/preun/post dependencies and improve scriptlets a bit.
+- Drop dependencies on DBD::mysql and Mail::SPF::Query.
+- Add dependencies on IO::Socket::INET6, Mail::SPF, and altermime.
+
+* Sun Jul 08 2007 Steven Pritchard <steve@kspei.com> 2.5.2-1
+- Update to 2.5.2.
+
+* Fri Jun 22 2007 Steven Pritchard <steve@kspei.com> 2.5.2-0.1.rc2
+- Update to 2.5.2-rc2.
+
+* Fri Jun 22 2007 Steven Pritchard <steve@kspei.com> 2.5.1-1
+- Update to 2.5.1.
+- Fix amavis-clamd.conf (bug #237252).
+- Update amavisd-conf.patch.
+- Require p7zip and tar.
+- Improve pre/preun/post scripts.
+
+* Thu Feb 22 2007 Steven Pritchard <steve@kspei.com> 2.4.5-1
+- Update to 2.4.5.
+
+* Mon Dec 18 2006 Steven Pritchard <steve@kspei.com> 2.4.4-2
+- Fix the path to amavisd.sock in amavisd-release.
+
+* Tue Dec 05 2006 Steven Pritchard <steve@kspei.com> 2.4.4-1
+- Update to 2.4.4.
+
+* Fri Dec 01 2006 Steven Pritchard <steve@kspei.com> 2.4.3-5
+- Add missing amavisd-release script.
+
+* Tue Nov 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-4
+- Rebuild.
+
+* Tue Nov 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-3
+- Add dependency on file. (#215492)
+
+* Sat Oct 14 2006 Steven Pritchard <steve@kspei.com> 2.4.3-2
+- Fix permissions on the cron.daily script.
+
+* Tue Oct 10 2006 Steven Pritchard <steve@kspei.com> 2.4.3-1
+- Update to 2.4.3.
+- Add quarantine directory and instructions for enabling it.
+- Add tmpwatch cron script.
+
+* Thu Sep 28 2006 Steven Pritchard <steve@kspei.com> 2.4.2-4
+- Drop lha dependency and add arj.
+
+* Sun Sep 17 2006 Steven Pritchard <steve@kspei.com> 2.4.2-3
+- Rebuild.
+
+* Wed Aug 02 2006 Steven Pritchard <steve@kspei.com> 2.4.2-2
+- Fix path to clamd socket in amavisd-conf.patch.
+
+* Mon Jul 31 2006 Steven Pritchard <steve@kspei.com> 2.4.2-1
+- Update to 2.4.2
+- Fix permissions on README.fedora (bug #200769)
+
+* Tue Jun 20 2006 Steven Pritchard <steve@kspei.com> 2.4.1-1
+- Update to 2.4.1
+- Drop zoo dependency due to Extras maintainer security concerns
+
+* Tue Apr 25 2006 Steven Pritchard <steve@kspei.com> 2.4.0-1
+- Update to 2.4.0
+
+* Thu Feb 02 2006 Steven Pritchard <steve@kspei.com> 2.3.3-5
+- Add dist to Release
+
+* Wed Sep 21 2005 Steven Pritchard <steve@kspei.com> 2.3.3-4
+- Add TODO and amavisd.conf-* to %%doc
+
+* Mon Sep 19 2005 Steven Pritchard <steve@kspei.com> 2.3.3-3
+- Add amavisd-db.patch to fix the path to the db directory in
+  amavisd-agent and amavisd-nanny.  (Thanks to Julien Tognazzi.)
+
+* Fri Sep 02 2005 Steven Pritchard <steve@kspei.com> 2.3.3-2
+- Requires: perl(Compress::Zlib) >= 1.35
+
+* Thu Sep 01 2005 Steven Pritchard <steve@kspei.com> 2.3.3-1
+- Update to 2.3.3
+- Remove explicit dependencies on core perl modules
+
+* Fri Aug 19 2005 Steven Pritchard <steve@kspei.com> 2.3.2-10
+- Recommend using 127.0.0.1 instead of localhost in README.fedora
+- .deb support requires ar
+
+* Wed Aug 17 2005 Steven Pritchard <steve@kspei.com> 2.3.2-9
+- Set $virus_admin, $mailfrom_notify_admin, $mailfrom_notify_recip,
+  and $mailfrom_notify_spamadmin to undef in the default config to
+  turn off notification emails
+
+* Fri Aug 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-8
+- Add dependencies for freeze, lzop, nomarch, zoo, cabextract
+
+* Wed Jul 27 2005 Steven Pritchard <steve@kspei.com> 2.3.2-7
+- Add README.fedora with simplified Postfix instructions
+
+* Mon Jul 25 2005 Steven Pritchard <steve@kspei.com> 2.3.2-6
+- Create /var/spool/amavisd/db
+
+* Thu Jul 21 2005 Steven Pritchard <steve@kspei.com> 2.3.2-5
+- Add perl(Mail::SPF::Query) (now packaged for Extras) dependency
+- Drop /var/log/amavisd since we weren't using it
+- Fix paths for clamd.sock and amavisd.pid in a couple of places
+
+* Tue Jul 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-4
+- Add a bunch of other missing Requires (both actually required modules
+  and optional modules)
+
+* Tue Jul 12 2005 Steven Pritchard <steve@kspei.com> 2.3.2-3
+- Add missing Requires: perl(Convert::TNEF)
+
+* Wed Jul 06 2005 Steven Pritchard <steve@kspei.com> 2.3.2-2
+- Fix init script ordering
+- Don't enable amavisd by default
+
+* Wed Jul 06 2005 Steven Pritchard <steve@kspei.com> 2.3.2-1
+- Update to 2.3.2
+
+* Wed Jun 29 2005 Steven Pritchard <steve@kspei.com> 2.3.2-0.1.rc1
+- Update to 2.3.2-rc1
+- Fedora Extras clamav integration
+- Drop amavisd-syslog.patch (Unix::Syslog is in Extras)
+
+* Mon Feb 23 2004 Steven Pritchard <steve@kspei.com> 0.20030616.p7-0.fdr.0.1
+- Add amavisd-syslog.patch to eliminate Unix::Syslog dependency
+- Add in clamd helper
+- Fix up init script
+- Initial package

amavisd-snmp.init

@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# amavisd-snmp:        Init script for amavisd-snmp-subagent
+#
+# chkconfig: - 79 31
+# description: Exports amavisd SNMP data
+# pidfile: /var/run/amavisd-snmp-subagent.pid
+
+# Source function library.
+. /etc/init.d/functions
+
+RETVAL=0
+
+start() {
+    echo -n $"Starting amavisd-snmp-subagent: "
+    [ $RETVAL -eq 0 ] && { daemon amavisd-snmp-subagent -P /var/run/amavisd-snmp-subagent.pid; RETVAL=$?; };
+    [ $RETVAL -eq 0 ] && { touch /var/lock/subsys/amavisd-snmp-subagent; RETVAL=$?; };
+    [ $RETVAL -eq 0 ] && echo_success || echo_failure
+    echo
+}
+
+stop() {
+    echo -n $"Shutting down amavisd-snmp-subagent: "
+    kill $( cat /var/run/amavisd-snmp-subagent.pid ) || RETVAL=1
+    [ $RETVAL -eq 0 ] && { rm -f /var/lock/subsys/amavisd-snmp-subagent; RETVAL=$?; };
+    [ $RETVAL -eq 0 ] && echo_success || echo_failure
+    echo
+}
+
+restart() {
+    stop
+    start
+}
+
+# See how we were called.
+case "$1" in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    status)
+        status amavisd-snmp-subagent
+        ;;
+
+    reload)
+	restart
+	;;
+
+    restart)
+	restart
+        ;;
+
+    condrestart)
+        [ -f /var/lock/subsys/amavisd-snmp-subagent ] && restart || :
+        ;;
+
+    *)
+        echo $"Usage: $0 {start|stop|status|restart|condrestart}"
+        exit 1
+esac
+
+exit $RETVAL
+

amavisd.cron

@@ -0,0 +1,2 @@
+/usr/sbin/tmpwatch 24 /var/spool/amavisd/tmp
+/usr/sbin/tmpwatch -d 720 /var/spool/amavisd/quarantine

dead.package

@@ -1 +0,0 @@
-Renamed to amavis

sources

@@ -0,0 +1 @@
+2b83d60b49855943c297743db0029218  amavisd-new-2.9.1.tar.xz