2016-09-13: Retired orphaned package, because it was orphaned for

more than six weeks.

.cvsignore

@@ -1 +0,0 @@
-and-1.2.2.tar.gz

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: and
-# $Id$
-NAME := and
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attept a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

and-1.2.2-makefile.patch

@@ -1,196 +0,0 @@
---- and-1.2.2/Makefile.org	2005-03-27 21:39:37.000000000 +0200
-+++ and-1.2.2/Makefile	2007-07-25 18:25:00.000000000 +0200
-@@ -143,16 +143,16 @@ endif
- # Build the auto-nice daemon.
- #
- and: and.o and-$(ARCH).o
--	$(LD) and.o and-$(ARCH).o -o and $(LIBS)
-+	$(LD) $(CFLAGS) -g and.o and-$(ARCH).o -o and $(LIBS)
- 
- 
- #
- # Independent part: configuration management, priority database.
- #
- and.o: and.c and.h
--	$(CC) -DDEFAULT_INTERVAL=60 -DDEFAULT_NICE=0 \
--	  -DDEFAULT_CONFIG_FILE=\"$(INSTALL_ETC)/and.conf\" \
--	  -DDEFAULT_DATABASE_FILE=\"$(INSTALL_ETC)/and.priorities\" \
-+	$(CC) $(CFLAGS) -g -DDEFAULT_INTERVAL=60 -DDEFAULT_NICE=0 \
-+	  -DDEFAULT_CONFIG_FILE=\"$(INSTALL_ETC)/and/and.conf\" \
-+	  -DDEFAULT_DATABASE_FILE=\"$(INSTALL_ETC)/and/and.priorities\" \
- 	  -DAND_VERSION=\"$(VERSION)\" -DAND_DATE=\"$(DATE)\" -c and.c
- 
- 
-@@ -160,7 +160,7 @@ and.o: and.c and.h
- # Unix variant specific stuff
- #
- and-Linux.o: and.h and-Linux.c
--	$(CC) -c and-Linux.c
-+	$(CC) $(CFLAGS) -g -c and-Linux.c
- 
- and-OpenBSD.o: and.h and-OpenBSD.c
- 	$(CC) -c and-OpenBSD.c
-@@ -214,30 +214,19 @@ and.priorities.5:	and.priorities.5.man
- #
- # Install and under $(PREFIX)/bin etc.
- #
--install: and $(INITSCRIPT)
--	strip and
-+install: and
-+
- #-mkdir $(PREFIX)
- 	-mkdir -p $(DESTDIR)$(INSTALL_SBIN)
--	-mkdir -p $(DESTDIR)$(INSTALL_ETC)
-+	-mkdir -p $(DESTDIR)$(INSTALL_ETC)/and/
- 	-mkdir -p $(DESTDIR)$(INSTALL_INITD)
- 	-mkdir -p $(DESTDIR)$(INSTALL_MAN)/man5
- 	-mkdir -p $(DESTDIR)$(INSTALL_MAN)/man8
- 	$(INSTALL) -m 0755 and $(DESTDIR)$(INSTALL_SBIN)
--	test -e $(DESTDIR)$(INSTALL_ETC)/and.conf || \
--	   $(INSTALL) -m 0644 and.conf $(DESTDIR)$(INSTALL_ETC)
--	test -e $(DESTDIR)$(INSTALL_ETC)/and.priorities || \
--	   $(INSTALL) -m 0644 and.priorities $(DESTDIR)$(INSTALL_ETC)
--ifneq (${INITSCRIPT},)
--ifneq (${INSTALL_INITD},)
--	@echo "Installing SysV script in $(DESTDIR)$(INSTALL_INITD)"
--	$(INSTALL) -m 0755 $(INITSCRIPT) $(DESTDIR)$(INSTALL_INITD)/and
--else
--	@echo "Installing SysV script in $(DESTDIR)$(INSTALL_SBIN)"
--	$(INSTALL) -m 0755 $(INITSCRIPT) $(DESTDIR)$(INSTALL_SBIN)
--	@echo "Installing SysV init.d finder in $(DESTDIR)$(INSTALL_SBIN)"
--	$(INSTALL) -m 0755 and-find-init.d $(DESTDIR)$(INSTALL_SBIN)
--endif
--endif
-+	test -e $(DESTDIR)$(INSTALL_ETC)/and/and.conf || \
-+	   $(INSTALL) -m 0644 and.conf $(DESTDIR)$(INSTALL_ETC)/and/
-+	test -e $(DESTDIR)$(INSTALL_ETC)/and/and.priorities || \
-+	   $(INSTALL) -m 0644 and.priorities $(DESTDIR)$(INSTALL_ETC)/and/
- 	$(INSTALL) -m 0644 and.8 $(DESTDIR)$(INSTALL_MAN)/man8
- 	$(INSTALL) -m 0644 and.conf.5 $(DESTDIR)$(INSTALL_MAN)/man5
- 	$(INSTALL) -m 0644 and.priorities.5 $(DESTDIR)$(INSTALL_MAN)/man5
-@@ -252,9 +241,6 @@ simpleinstall: and and.init
- 	   cp and.conf $(DESTDIR)$(INSTALL_ETC)
- 	test -e $(DESTDIR)$(INSTALL_ETC)/and.priorities || \
- 	   cp and.priorities $(DESTDIR)$(INSTALL_ETC)
--ifneq (${INITSCRIPT},) # on SysV only
--	cp $(INITSCRIPT) $(DESTDIR)$(INSTALL_INITD)/and
--endif
- 	cp and.8 $(DESTDIR)$(INSTALL_MAN)/man8
- 	cp and.conf.5 $(DESTDIR)$(INSTALL_MAN)/man5
- 	cp and.priorities.5 $(DESTDIR)$(INSTALL_MAN)/man5
---- and-1.2.2/and.priorities.5.man.org	2004-04-05 21:19:29.000000000 +0200
-+++ and-1.2.2/and.priorities.5.man	2007-07-25 18:25:00.000000000 +0200
-@@ -1,7 +1,7 @@
- .TH AND.PRIORITIES 5 "__DATE__" "Unix" "File Formats"
- 
- .SH "NAME"
--/etc/and.priorities \- priority database for the auto nice daemon.
-+/etc/and/and.priorities \- priority database for the auto nice daemon.
- 
- 
- .SH "VERSION"
-@@ -16,12 +16,12 @@ This is the priority database file for
- It stores (user, group, command, parent, nicelevels) tuples (hereafter called
- entries) to determine the new nice level (or the kill signal, for that
- matter) when a job reaches one of the time limits defined in
--.I /etc/and.conf.
-+.I /etc/and/and.conf.
- (See lv1time, lv2time, and lv3time on the and.conf manual page for
- details.) See the
- .B affinity
- setting in 
--.I /etc/and.conf
-+.I /etc/and/and.conf
- for how ambiguities between the fields (user, group, command, parent) 
- are dealt with when searching the database to determine the new nice 
- level for a job.
-@@ -187,7 +187,7 @@ grid * grid_master * 0 0 0
- .SH "FILES"
- 
- .TP 0.5i
--.B  /etc/and.priorities
-+.B  /etc/and/and.priorities
- The priority database (in plain text). Contains the (user, group, command,
- nicelevels) tuples. This is what this manual page is about.
- 
---- and-1.2.2/and.conf.5.man.org	2005-03-27 21:38:32.000000000 +0200
-+++ and-1.2.2/and.conf.5.man	2007-07-25 18:25:00.000000000 +0200
-@@ -1,7 +1,7 @@
- .TH AND.CONF 5 "__DATE__" "Unix" "File Formats"
- 
- .SH "NAME"
--/etc/and.conf \- general configuration parameters for the
-+/etc/and/and.conf \- general configuration parameters for the
- auto nice daemon.
- 
- 
-@@ -52,11 +52,11 @@ the auto nice daemon to enable the chang
- .B defaultnice
- The default nice level. A number between 0 and 19. Jobs for which no
- entry can be found in
--.I /etc/and.priorities
-+.I /etc/and/and.priorities
- are reniced to this level, regardless of the CPU time they've used
- so far. If you prefer to renice unknown jobs gradually, you can do
- so by supplying three asterisks as (user, group, command) tuple in
--.I /etc/and.priorities.
-+.I /etc/and/and.priorities.
- The default nice level is
- .I 0
- 
---- and-1.2.2/and.8.man.org	2002-01-27 16:59:57.000000000 +0100
-+++ and-1.2.2/and.8.man	2007-07-25 18:25:00.000000000 +0200
-@@ -55,13 +55,13 @@ to kill -9 it after e.g. 20 CPU minutes.
- .TP 0.5i
- .B \-c /path/to/and.conf
- Specifies the configuration file. If this flag is omitted,
--.I /etc/and.conf
-+.I /etc/and/and.conf
- is used instead.
- 
- .TP 0.5i
- .B \-d /path/to/and.priorities
- Specifies the priority database file. If this flag is omitted,
--.I /etc/and.priorities
-+.I /etc/and/and.priorities
- is used instead.
- 
- .TP 0.5i
-@@ -112,12 +112,12 @@ database.
- .SH "FILES"
- 
- .TP 0.5i
--.B  /etc/and.conf
-+.B  /etc/and/and.conf
- General configuration file. Stores default nice level, default interval,
- the "time zones" and the database lookup affinity.
- 
- .TP 0.5i
--.B /etc/and.priorities
-+.B /etc/and/and.priorities
- The priority database (in plain text). Contains the (user, group, command,
- nicelevels) tuples.
- 
---- and-1.2.2/README.org	2005-03-27 21:39:37.000000000 +0200
-+++ and-1.2.2/README	2007-07-25 18:28:31.000000000 +0200
-@@ -83,13 +83,13 @@ Installation:
- 
-    Edit the Makefile, which is well documented. (g)make. (g)make install.
-    (make simpleinstall if you don't have install(1) (which you really
--   should). Edit the configuration files, /etc/and.conf and
--   /etc/and.priorities. Start /usr/local/sbin/and. You must run it as
--   root if you want it to renice or kill any jobs but your own; on all
--   platforms but Linux, not even dummy mode will work for mortal users.
--   That's due to the way process information is accessible under these
--   Unices. (Linux is more generous here, which can be seen as both an
--   advantage and a security flaw. I'm not conclusive on this topic.)
-+   should). Edit the configuration files, /etc/and/and.conf and
-+   /etc/and/and.priorities. Start /usr/sbin/and. You must run it as root 
-+   if you want it to renice or kill any jobs but your own; on all platforms 
-+   but Linux, not even dummy mode will work for mortal users. That's due to 
-+   the way process information is accessible under these Unices. (Linux is 
-+   more generous here, which can be seen as both an advantage and a security 
-+   flaw. I'm not conclusive on this topic.)
- 
- Last updated:
- 

and.init

@@ -1,83 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/init.d/and, /sbin/init.d/and, /etc/init.d/and
-#
-# SysV init.d compliant startup script for auto nice daemon.
-#
-# 1999, 2000, 2001 Patrick Schemitz <schemitz@users.sourceforge.net>
-# http://and.sourceforge.net/
-# 
-# chkconfig: - 90 10
-# description: automatically renice and kill jobs.
-#
-# processname: and
-# config: /etc/and.conf
-#
-
-### BEGIN INIT INFO
-# Provides: and
-# Required-Start: $syslog
-# Required-Stop:
-# Default-Stop: 0 6
-# Short-Description: Automatically renice and kill jobs
-# Description: Autmatically renice and kill jobs
-### END INIT INFO
-
-prog=and
-and_bin=/usr/sbin/and
-and_conf=/etc/and/and.conf
-
-. /etc/rc.d/init.d/functions
-
-AND_FLAGS=""
-test -r /etc/sysconfig/and && . /etc/sysconfig/and
-
-start() {
-    echo -n $"Starting auto nice daemon:"
-    daemon /usr/sbin/and $AND_FLAGS >/dev/null 2>&1
-    RETVAL=$?
-    echo
-    [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
-}
-
-stop() {
-    echo -n $"Shutting down auto nice daemon:"
-    killproc and -QUIT
-    RETVAL=$?
-    echo
-    [ $RETVAL -eq 0 ] && rm -rf /var/lock/subsys/$prog
-}
-
-restart() {
-    stop
-    start
-}
-
-RETVAL=0
-
-[ -x $and_bin -a -s $and_conf ] || exit 0
-
-case "$1" in
-    start)
-	start
-	;;
-    stop)
-	stop
-	;;
-    restart|reload)
-	stop
-	start
-	RETVAL=$?
-	;;
-    condrestart)
-	[ -e /var/lock/subsys/$prog ] && restart || :
-	;;
-    status)
-	status $prog
-	;;
-    *)
-	echo "Usage: $0 {start|stop|restart|condrestart|status}"
-	exit 1
-esac
-
-exit $RETVAL

and.spec

@@ -1,101 +0,0 @@
-Name:      and
-Version:   1.2.2
-Release:   6%{?dist}
-Summary:   Auto nice daemon
-
-License:   GPLv2
-Group:     System Environment/Daemons
-
-URL:       http://and.sourceforge.net
-Source0:   http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz
-Source1:   and.init
-Source2:   and.sysconf 
-Patch1:    and-1.2.2-makefile.patch
-
-Buildroot: %{_tmppath}/%{name}-%{version}-root-%(%{__id_u} -n)
-
-Requires(post):  /sbin/chkconfig
-Requires(postun):  /sbin/service
-Requires(preun): /sbin/chkconfig
-Requires(preun): /sbin/service
-
-%description
-The auto nice daemon renices and even kills jobs according to their CPU time,
-owner, and command name. This is especially useful on production machines with
-lots of concurrent CPU-intensive jobs and users that tend to forget to
-nice their jobs.
-
-%prep            
-%setup1 -q
-%patch1 -p1 -b .org
-
-%build
-make %{?_smp_mflags} \
-     CFLAGS='%{optflags}' \
-     PREFIX=%{_prefix} \
-     INSTALL_ETC=%{_sysconfdir} \
-     INSTALL_SBIN=%{_sbindir} \
-     INSTALL_MAN=%{_mandir}
-
-%install
-rm -rf %{buildroot}
-mkdir -p %{buildroot}%{_sysconfdir}
-mkdir -p %{buildroot}%{_sbindir}
-mkdir -p %{buildroot}%{_mandir}/man8
-mkdir -p %{buildroot}%{_mandir}/man5
-make PREFIX=%{buildroot}%{_prefix} \
-     INSTALL_ETC=%{buildroot}%{_sysconfdir} \
-     INSTALL_SBIN=%{buildroot}%{_sbindir} \
-     INSTALL_MAN=%{buildroot}%{_mandir} install 
-
-mkdir -p %{buildroot}%{_initrddir}
-install -p -m 0755 %{SOURCE1} %{buildroot}%{_initrddir}/and
-
-mkdir -p %{buildroot}%{_sysconfdir}/sysconfig
-install -p -m 0644 %{SOURCE2} %{buildroot}%{_sysconfdir}/sysconfig/and
-
-%clean
-rm -rf %{buildroot}
-
-%post
-/sbin/chkconfig --add and
-
-%preun
-if [ $1 -eq 0 ]; then 
-   /sbin/service and stop >/dev/null 2>&1 || :
-   /sbin/chkconfig --del and
-fi
-
-%postun
-if [ $1 -ge 1 ]; then
-   /sbin/service and condrestart >/dev/null
-fi
-
-%files
-%defattr(-,root,root)
-%doc README LICENSE CHANGELOG
-%config(noreplace) %{_sysconfdir}/and/
-%config(noreplace) %{_sysconfdir}/sysconfig/and
-%{_sbindir}/*
-%attr(0755,root,root) %{_initrddir}/and
-%{_mandir}/man5/*.gz
-%{_mandir}/man8/*.gz
-
-%changelog
-* Wed Feb 13 2008 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-6
-- Rebuild for gcc-4.3
-
-* Wed Jan 23 2008 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-5
-- Rebuild
-
-* Thu Aug  9 2007 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-4
-- Changing license tag
-
-* Mon Jul 30 2007 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-3
-- Fix wrong postun requires
-
-* Thu Jul 26 2007 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-2
-- Adding sysconfig file template
-
-* Tue Jul 24 2007 Jochen Schmitt <Jochen herr-schmitt de> 1.2.2-1
-- Initial package for Fedora

and.sysconf

@@ -1,4 +0,0 @@
-# Allow to set the options for and starting
-# by the initscript
-
-AND_FLAGS=

dead.package

@@ -0,0 +1,3 @@
+2016-09-13: Retired orphaned package, because it was orphaned for
+more than six weeks.
+

sources

@@ -1 +0,0 @@
-b939909039a8487eec93ff7eb56a4779  and-1.2.2.tar.gz