Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild

Add elf2tag.1 man page from upstream draft PR
https://github.com/avrdudes/avrdude/pull/1916

.gitignore

@@ -9,3 +9,8 @@
 /*.src.rpm
 /x86_64/
 /avrdude-6.4.tar.gz
+/avrdude-7.*/
+/avrdude-7.*.tar.gz
+/avrdude-7.*-filtered.tar.xz
+/avrdude-8.0/
+/avrdude-8.0.tar.gz

GNUmakefile

@@ -0,0 +1,31 @@
+name = avrdude
+version = 8.0
+
+RELEASES =
+RELEASES += f42
+RELEASES += f41
+RELEASES += f40
+RELEASES += f39
+RELEASES += el9
+RELEASES += el8
+
+MOCK_OPTS =
+# MOCK_OPTS += --without docs
+
+.PHONY: all
+all: $(name)-rpm.stamp
+	git grep -Ei '([F]IXME|[T]ODO|[X]XX)' ||:
+
+$(name)-rpm.stamp: $(name)-$(version).tar.gz $(name).spec $(name).udev README.fedora $(wildcard $(name)-*.patch)
+	set -ex; \
+	fedpkg local; \
+	for rel in $(RELEASES); do \
+	  fedpkg --release "$$rel" mockbuild; \
+	done
+	date > $@
+
+$(name)-$(version).tar.gz:
+	curl -L -o $@ https://github.com/avrdudes/$(name)/archive/refs/tags/v$(version).tar.gz
+	sha512sum --tag $@ > sources
+
+# End of file.

README.fedora

@@ -11,7 +11,7 @@ When you run `avrdude`, the avrdude process must be allowed to access
 the device special file somewhere in `/dev/` which corresponds to the
 programmer to be used.
 
-`avrdude` support many different programmer types (run `avrdude -c
+`avrdude` supports many different programmer types (run `avrdude -c
 list` to see a list of them).
 
 Many of these programmer types are USB devices which appear as a
@@ -30,18 +30,18 @@ AT-command devices (device file name `/dev/ttyACM<N>`).
 While it is technically possible to make all `/dev/ttyUSB<N>` and/or
 `/dev/ttyACM<N>` devices writable for whichever Linux user happens to
 be the local user, some of those devices can be devices for which it
-is better if they are not being writable by anyone.
+is better if they are not writable by just anyone.
 
-Therefore, the avrdude Fedora does *not* make all `/dev/ttyUSB<N>`
-and/or `/dev/ttyACM<N>` writable for the local user just by install
-the package.
+Therefore, the avrdude Fedora package does *not* make all
+`/dev/ttyUSB<N>` and/or `/dev/ttyACM<N>` writable for the local user
+just by installing the package.
 
 If you *do* want to make these devices writable for any local user,
 you can configure your system yourself by dropping a udev rules file
 into `/etc/udev/rules.d/`.  But while you are at it, you can as well
-examine your programmer close (`lsusb` and `lsusb -v` can be helpful
-here) and narrow down the udev rule matching to match only your
-programmer, not each and every `ttyUSB<N>` or `ttyACM<N>` device.
+examine your programmer more closely (`lsusb` and `lsusb -v` can be
+helpful here) and narrow down the udev rule matching to match only
+your programmer, not each and every `ttyUSB<N>` or `ttyACM<N>` device.
 
 ``` /etc/udev/rules.d/99-my-avrdude-programmers.rules
 ACTION!="add|change", GOTO="my_avrdude_programmers_end"
@@ -61,10 +61,15 @@ SUBSYSTEM=="usb", DRIVERS=="cdc_acm", TAG+="uaccess"
 LABEL="my_avrdude_programmers_end"
 ```
 
-Unfortunately, the existing avrdude Fedora package udev rules do not
-support setting up permissions for non-local users, like e.g. users
-logged in via ssh. If you need such a setup, you will need also to
-write your own udev rules file for `/etc/udev/rules.d/`, and set
-`OWNER=`, `GROUP=`, `MODE=`, or change the device ACL with something
-like `RUN+="/usr/bin/setfacl -m g:avrdude-programmers:rw
-'$env{DEVNAME}'"`.
+
+Non-local users
+---------------
+
+At this time, the avrdude Fedora package udev rules do not support
+setting up permissions for non-local users, like e.g. users logged in
+via ssh.
+
+If you need such a setup, you will need also to write your own udev
+rules file for `/etc/udev/rules.d/`, and set `OWNER=`, `GROUP=`,
+`MODE=`, or change the device ACL with something like
+`RUN+="/usr/bin/setfacl -m g:avrdude-programmers:rw '$env{DEVNAME}'"`.

avrdude-6.1_includes.patch

@@ -1,13 +0,0 @@
-diff -p -up ./configure.org ./configure
---- ./configure.org     2014-06-04 21:00:03.027735142 +0200
-+++ ./configure 2014-06-04 21:04:46.428267513 +0200
-@@ -5650,7 +5650,8 @@ fi
- LIBPTHREAD=$LIBPTHREAD
- 
- # Checks for header files.
--for ac_header in limits.h stdlib.h string.h
-+for ac_header in limits.h stdlib.h string.h inttypes.h stdint.h memory.h \
-+			strings.h sys/stat.h sys_time.h sys_types.h termios.h
- do :
-   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
- ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"

avrdude-6.4-fix-file-locations-in-docs.patch

@@ -1,23 +0,0 @@
-diff -ruN avrdude-6.4/doc/avrdude.texi avrdude-6.4-file-locations/doc/avrdude.texi
---- avrdude-6.4/doc/avrdude.texi	2021-11-29 21:54:35.000000000 +0100
-+++ avrdude-6.4-file-locations/doc/avrdude.texi	2022-04-20 05:07:45.669524302 +0200
-@@ -443,7 +443,8 @@
- contains all programmer and part definitions that AVRDUDE knows about.
- If not
- specified, AVRDUDE reads the configuration file from
--/usr/local/etc/avrdude.conf (FreeBSD and Linux). See Appendix A for
-+/etc/avrdude/avrdude.conf (Fedora) or
-+/usr/local/etc/avrdude.conf (FreeBSD and generic Linux). See Appendix A for
- the method of searching for the configuration file for Windows.
- 
- If @var{config-file} is written as @var{+filename}
-@@ -1428,7 +1429,8 @@
- programmer work with AVRDUDE.
- 
- AVRDUDE first looks for a system wide configuration file in a platform
--dependent location.  On Unix, this is usually
-+dependent location.  On Fedora, this is
-+@code{/etc/avrdude/avrdude.conf}. On Unix, it is usually
- @code{/usr/local/etc/avrdude.conf}, while on Windows it is usually in the
- same location as the executable file.  The name of this file can be
- changed using the @option{-C} command line option.  After the system wide

avrdude.spec

@@ -1,36 +1,65 @@
-%global udev_rules 70-avrdude_usbprog.rules
+%global udev_rules_old 70-avrdude-devices.rules
+%global udev_rules_gen 71-avrdude-devices.rules
+
+# Allow skipping doc builds for faster mockbuilds without the
+# literally hundreds of extra packages required for building docs.
+%bcond_without docs
 
 Name:           avrdude
-Version:        6.4
-Release:        3%{?dist}
+Version:        8.0
+Release:        8%{?dist}
 Summary:        Software for programming Atmel AVR Microcontroller
 
-License:        GPLv2+
-URL:            https://www.nongnu.org/avrdude
-Source0:        https://download.savannah.gnu.org/releases/%{name}/%{name}-%{version}.tar.gz
-Source1:        https://salsa.debian.org/debian/avrdude/-/raw/master/debian/avrdude.udev
-Source2:        README.fedora
-# From: https://savannah.nongnu.org/bugs/?42517
-Patch0:         avrdude-6.1_includes.patch
-# Stop granting blanket access to all /dev/tty{ACM,USB}* devices
-Patch1:         avrdude-udev-no-blanket-access.patch
-# Mention proper doc and config file locations in texinfo documentation
-Patch2:         avrdude-6.4-fix-file-locations-in-docs.patch
+License:        GPL-2.0-or-later AND GPL-3.0-only AND (WTFPL OR MIT)
+URL:            https://github.com/avrdudes/avrdude
 
+# Upstream avrdude have no 4big endian support planned.
+# https://bugzilla.redhat.com/show_bug.cgi?id=2308947
+# https://github.com/avrdudes/avrdude/issues/1917
+ExcludeArch:    s390x
+
+Source0:        https://github.com/avrdudes/%{name}/archive/refs/tags/v%{version}.tar.gz#/%{name}-%{version}.tar.gz
+
+# Debian have a more comprehensive list of programmer devices in their
+# avrdude.dev file. We do cannot use this unchanged, though, as we do
+# not want to grant blanket access to all ttyUSB and ttyACM devices.
+# Source1:        https://salsa.debian.org/debian/avrdude/-/raw/master/debian/avrdude.udev
+Source1:        avrdude.udev
+
+# Remarks on the Fedora package for the users
+Source2:        README.fedora
+
+# Quick fix elf2tag man page
+Source5:        elf2tag.1
+
+# Stop granting blanket access to all /dev/tty{ACM,USB}* devices
+Patch:          avrdude-udev-no-blanket-access.patch
+
+BuildRequires:  cmake
 BuildRequires:  gcc
 BuildRequires:  flex
 BuildRequires:  bison
 BuildRequires:  elfutils-libelf-devel
 BuildRequires:  hidapi-devel
+%if ((0%{?fedora} >= 1) || (0%{?rhel} >= 8))
+BuildRequires:  libgpiod-devel
+%endif
+%if ((0%{?fedora} >= 1) || (0%{?rhel} >= 9))
+BuildRequires:  libserialport-devel
+%endif
+# EL does not have libhid-devel
+%if 0%{?fedora} >= 28
 BuildRequires:  libhid-devel
+%endif
 BuildRequires:  readline-devel
 BuildRequires:  ncurses-devel
 BuildRequires:  libftdi-devel
-BuildRequires:  pkgconfig(libusb)
 BuildRequires:  pkgconfig(libusb-1.0)
+%if %{with docs}
 BuildRequires:  texi2html
+BuildRequires:  texinfo
 BuildRequires:  texinfo-tex
-BuildRequires:  tetex-dvips
+%endif
 BuildRequires:  make
 
 # https://fedoraproject.org/wiki/Changes/RemoveObsoleteScriptlets
@@ -49,60 +78,167 @@ particular chip.
 
 
 %prep
-%setup -q
+%setup -q -n %{name}-%{version}
 cp -p %{SOURCE1} avrdude.udev
-%patch0 -p0 -b .patch0
-%patch1 -p1 -b .patch1
-%patch2 -p1 -b .patch2
-
-sed -i 's|${PREFIX}/etc/avrdude\.conf|/etc/avrdude/avrdude.conf|g' avrdude.1
-sed -i 's|${PREFIX}/share/doc/avrdude/avrdude\.pdf|%{_pkgdocdir}/avrdude.pdf|g' avrdude.1
-
-iconv -f ISO88591 -t UTF8 < ChangeLog-2003 > ChangeLog-2003~
-mv ChangeLog-2003~ ChangeLog-2003
-iconv -f ISO88591 -t UTF8 < NEWS > NEWS~
-mv NEWS~ NEWS
+%autopatch -v -p1
+if test -d atmel-docs; then
+  echo "Directory 'atmel-docs' still exists, aborting."
+  exit 2
+fi
+sed -i 's|^find_package(SWIG|\# find_package(SWIG|' CMakeLists.txt
 
 
 %build
-%configure --disable-silent-rules --enable-doc --enable-linuxgpio --enable-linuxspi --enable-parport --sysconfdir=%{_sysconfdir}/%{name}
-%make_build
+%cmake \
+       -D CMAKE_INSTALL_SYSCONFDIR:PATH=%{_sysconfdir} \
+       -D CMAKE_BUILD_TYPE=build_type=RelWithDebInfo \
+%if %{with docs}
+       -D BUILD_DOC:BOOL=ON \
+%else
+       -D BUILD_DOC:BOOL=OFF \
+%endif
+       -D HAVE_LINUXSPI:BOOL=ON \
+       -D HAVE_LINUXGPIO:BOOL=ON \
+       -D HAVE_PARPORT:BOOL=ON \
+       -D FETCHCONTENT_FULLY_DISCONNECTED:BOOL=ON \
+       -D FETCHCONTENT_QUIET:BOOL=OFF \
+       -D BUILD_SHARED_LIBS:BOOL=NO \
+       -D USE_STATIC_LIBS:BOOL=YES
+
+if test -d _deps; then
+  echo "cmake appears to have fetched some dependency despite our precautions:"
+  ls -l _deps
+  exit 2
+fi
+
+%cmake_build
+
+# generate set of udev rules from avrdude.conf
+%{__cmake_builddir}/src/avrdude -C %{__cmake_builddir}/src/avrdude.conf -c '*/u' \
+  | sed -n '/ACTION!=/,$p' \
+  | sed 's|, MODE="0660"||' \
+  > genset.rules
+test -s genset.rules
 
 
 %install
-%make_install DOC_INST_DIR="$RPM_BUILD_ROOT%{_pkgdocdir}"
-rm -f $RPM_BUILD_ROOT%{_includedir}/libavrdude.h
+%cmake_install
+
 rm -f $RPM_BUILD_ROOT%{_infodir}/dir
+
+rm -f $RPM_BUILD_ROOT%{_includedir}/libavrdude-avrintel.h
+rm -f $RPM_BUILD_ROOT%{_includedir}/libavrdude.h
 rm -f $RPM_BUILD_ROOT%{_libdir}/libavrdude.a
-rm -f $RPM_BUILD_ROOT%{_libdir}/libavrdude.la
-rm -f $RPM_BUILD_ROOT%{_libdir}/libavrdude.so
-rm -f $RPM_BUILD_ROOT%{_libdir}/libavrdude.so.1
-rm -f $RPM_BUILD_ROOT%{_libdir}/libavrdude.so.1.0.0
-install -d -m 755 $RPM_BUILD_ROOT%{_udevrulesdir}
-install -p -m 644 avrdude.udev $RPM_BUILD_ROOT%{_udevrulesdir}/%{udev_rules}
-install -d -m 755 $RPM_BUILD_ROOT%{_pkgdocdir}
+
+install -d -m 755              $RPM_BUILD_ROOT%{_udevrulesdir}
+install -p -m 644 avrdude.udev $RPM_BUILD_ROOT%{_udevrulesdir}/%{udev_rules_old}
+install -p -m 644 genset.rules $RPM_BUILD_ROOT%{_udevrulesdir}/%{udev_rules_gen}
+
+install -d -m 755            $RPM_BUILD_ROOT%{_pkgdocdir}
 install -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_pkgdocdir}/README.fedora
+install -p -m 644         -t $RPM_BUILD_ROOT%{_pkgdocdir} AUTHORS NEWS README.md
+
+install -d -m 755            $RPM_BUILD_ROOT%{_mandir}/man1
+install -p -m 644 %{SOURCE5} $RPM_BUILD_ROOT%{_mandir}/man1/elf2tag.1
+
+
+%check
+%ctest
 
 
 %files
-%doc README AUTHORS ChangeLog* COPYING NEWS doc/TODO
+%license COPYING
+%doc %{_pkgdocdir}/AUTHORS
+%doc %{_pkgdocdir}/NEWS
+%doc %{_pkgdocdir}/README.md
 %doc %{_pkgdocdir}/README.fedora
+%if %{with docs}
 %doc %{_pkgdocdir}/avrdude-html/
 %doc %{_pkgdocdir}/avrdude.pdf
-%doc %{_pkgdocdir}/avrdude.ps
-%config(noreplace) %{_sysconfdir}/%{name}
-%{_udevrulesdir}/%{udev_rules}
-%{_bindir}/%{name}
-%{_mandir}/man1/%{name}.1.gz
-%{_infodir}/%{name}.info.*
+%endif
+%config(noreplace) %{_sysconfdir}/avrdude.conf
+%{_udevrulesdir}/%{udev_rules_old}
+%{_udevrulesdir}/%{udev_rules_gen}
+%{_bindir}/avrdude
+%{_bindir}/elf2tag
+%{_mandir}/man1/avrdude.1*
+%{_mandir}/man1/elf2tag.1*
+%if %{with docs}
+%{_infodir}/avrdude.info*
+%endif
 
 
 %changelog
+* Fri Jan 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 8.0-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+
+* Wed Jul 23 2025 Fedora Release Engineering <releng@fedoraproject.org> - 8.0-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Thu Jan 16 2025 Fedora Release Engineering <releng@fedoraproject.org> - 8.0-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Sun Sep  1 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 8.0-5
+- ExcludeArch: s390x (#2308947)
+- Add elf2tag.1 man page
+
+* Fri Aug 30 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 8.0-4
+- Actually ship static copy of udev rules as s390x workaround
+
+* Fri Aug 30 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 8.0-3
+- Ship static copy of udev rules as s390x workaround
+
+* Thu Aug 29 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 8.0-2
+- Rebuilt for forgotten new-sources
+
+* Sun Aug 25 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 8.0-1
+- Update to avrdude-8.0 release (#2307778)
+- Enable libserialport support
+- Build without old pre-1.0 libusb
+- Build with libgpiod
+- Move config file from /etc/avrdude/avrdude.conf to /etc/avrdude.conf
+- Continue not shipping libavrdude library due to unstable API/ABI
+- Do not build/ship libavrdude SWIG bindings (unstable API/ABI)
+- Do not build/ship avrdude GUI based on the SWIG bindings
+- Add new set of autogenerated udev rules
+
+* Wed Jul 17 2024 Fedora Release Engineering <releng@fedoraproject.org> - 7.3-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Wed Feb  7 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 7.3-1
+- Update to avrdude-7.3 release
+- Enable linuxgpio (without libgpiod, though)
+
+* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 7.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Fri Jan 19 2024 Hans Ulrich Niedermann <hun@n-dimensional.de> - 7.2-1
+- Updated to upstream avrdude-7.2 release from github.com (rhbz#2251649)
+- Filter upstream release tarball to remove pdf docs due to licensing
+- Migrated to SPDX license
+- Switched to cmake build system
+- Fixed upstream cmake detection of libreadline.so
+- Switched to upstream's new URL (github instead of nongnu.org)
+- Stop shipping PS doc format in favour of just avrdude.pdf
+- Keep avrdude.conf at the old Fedora location /etc/avrdude/ for now
+
+* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 6.4-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 6.4-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 6.4-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 6.4-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
 * Wed Apr 20 2022 Hans Ulrich Niedermann <hun@n-dimensional.de> - 6.4-3
 - Add README.fedora explaining USB device permission setup
 
 * Wed Apr 20 2022 Hans Ulrich Niedermann <hun@n-dimensional.de> - 6.4-2
-- Install built documentation directly to %{_pkgdocdir}
+- Install built documentation directly to %%{_pkgdocdir}
 - Fix file locations in man page, texinfo docs
 - Upstream already has fixed these files' x bits
 - Disable silent rules to help with build problems

avrdude.udev

@@ -28,6 +28,20 @@ SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2141", TAG+="uaccess
 SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2144", TAG+="uaccess"
 # Xplained Mini board
 SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2145", TAG+="uaccess"
+# Curiosity Nano (pkobn)
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2175", TAG+="uaccess"
+# MPLAB PICkit4 AVR mode
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2177", TAG+="uaccess"
+# MPLAB PICkit4 AVR mode alt 1
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2178", TAG+="uaccess"
+# MPLAB PICkit4 AVR mode alt 2
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2179", TAG+="uaccess"
+# MPLAB Snap AVR mode
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2180", TAG+="uaccess"
+# MPLAB Snap AVR mode alt 1
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="217f", TAG+="uaccess"
+# MPLAB Snap AVR mode alt 2
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2181", TAG+="uaccess"
 # ATxmega64C3 DFU
 SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2fd6", TAG+="uaccess"
 # ATxmega128C3 DFU
@@ -94,13 +108,35 @@ SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2ffd", TAG+="uaccess
 SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="2fff", TAG+="uaccess"
 # PICkit2
 SUBSYSTEM=="usb", ATTR{idVendor}=="04d8", ATTR{idProduct}=="0033", TAG+="uaccess"
+# MPLAB PICkit4 PIC mode
+SUBSYSTEM=="usb", ATTR{idVendor}=="04d8", ATTR{idProduct}=="9012", TAG+="uaccess"
+# MPLAB PICkit4 PIC mode alt
+SUBSYSTEM=="usb", ATTR{idVendor}=="04d8", ATTR{idProduct}=="9017", TAG+="uaccess"
+# MPLAB Snap PIC mode
+SUBSYSTEM=="usb", ATTR{idVendor}=="04d8", ATTR{idProduct}=="9018", TAG+="uaccess"
+# MPLAB Snap PIC mode alt
+SUBSYSTEM=="usb", ATTR{idVendor}=="04d8", ATTR{idProduct}=="9019", TAG+="uaccess"
 # USBasp
 SUBSYSTEM=="usb", ATTR{idVendor}=="16c0", ATTR{idProduct}=="05dc", TAG+="uaccess"
+# USBasp (old unofficial)
+SUBSYSTEM=="usb", ATTR{idVendor}=="03eb", ATTR{idProduct}=="c7b4", TAG+="uaccess"
+# Teensy
+SUBSYSTEM=="usb", ATTR{idVendor}=="16c0", ATTR{idProduct}=="0478", TAG+="uaccess"
 # NIBObee
 SUBSYSTEM=="usb", ATTR{idVendor}=="16c0", ATTR{idProduct}=="092f", TAG+="uaccess"
+# Micronucleus
+SUBSYSTEM=="usb", ATTR{idVendor}=="16d0", ATTR{idProduct}=="0753", TAG+="uaccess"
 # eHaJo
 SUBSYSTEM=="usb", ATTR{idVendor}=="16d0", ATTR{idProduct}=="0ba5", TAG+="uaccess"
 # USBtinyISP
 SUBSYSTEM=="usb", ATTR{idVendor}=="1781", ATTR{idProduct}=="0c9f", TAG+="uaccess"
+# ISE CKT
+SUBSYSTEM=="usb", ATTR{idVendor}=="1209", ATTR{idProduct}=="6570", TAG+="uaccess"
+# Arduino Gemma
+SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0c9f", TAG+="uaccess"
+# Arduino ISP
+SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0049", TAG+="uaccess"
+# Arduino ISP org
+SUBSYSTEM=="usb", ATTR{idVendor}=="2a03", ATTR{idProduct}=="0049", TAG+="uaccess"
 
 LABEL="avrdude_end"

elf2tag.1

@@ -0,0 +1,63 @@
+'\" t
+.\"     Title: elf2tag
+.\"    Author: [see the "AUTHOR(S)" section]
+.\" Generator: Asciidoctor 2.0.20
+.\"      Date: 2024-09-01
+.\"    Manual: elf2tag Manual
+.\"    Source: avrdude
+.\"  Language: English
+.\"
+.TH "ELF2TAG" "1" "2024-09-01" "avrdude" "elf2tag Manual"
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.ss \n[.ss] 0
+.nh
+.ad l
+.de URL
+\fI\\$2\fP <\\$1>\\$3
+..
+.als MTO URL
+.if \n[.g] \{\
+.  mso www.tmac
+.  am URL
+.    ad l
+.  .
+.  am MTO
+.    ad l
+.  .
+.  LINKSTYLE blue R < >
+.\}
+.SH "NAME"
+elf2tag \- output a tagfile for the avrdude disasm command
+.SH "SYNOPSIS"
+.sp
+\fBelf2tag\fP <file.elf>
+.sp
+\fBelf2tag\fP [\fB\-h\fP | \fB\-\-help\fP]
+.SH "DESCRIPTION"
+.sp
+\fIelf2tag\fP generates a tagfile for use with the \fIavrdude disasm\fP command.
+.SH "OPTIONS"
+.sp
+\fB\-h\fP \fB\-\-help\fP
+.RS 4
+Prints the help message and exits.
+.RE
+.SH "EXAMPLES"
+.sp
+.if n .RS 4
+.nf
+.fam C
+$ elf2tag file.elf > file.tag
+$ avrdude \-t ...
+avrdude> ...
+avrdude> disasm \-t=file.tag ...
+.fam
+.fi
+.if n .RE
+.SH "AUTHORS"
+.sp
+\fIelf2tag\fP was written by Johannes Bauer with small modifications by Stefan Rueger.
+.SH "SEE ALSO"
+.sp
+\fBavrdude(1)\fP, \fBavr\-nm\fP, \fBavr\-objdump(1)\fP

sources

@@ -1 +1 @@
-SHA512 (avrdude-6.4.tar.gz) = ce6127c212a83c5079d3bd80a7a0127220f9652201595a24b991916556eb8fc69d2910f7e112d7025a5aeec8d341e72293467ac1dc1a62be1f391dd9408f9a06
+SHA512 (avrdude-8.0.tar.gz) = c6fa365924aa8ad58a1b2f85c36ecc498c9b049b9bce455994752b8b13c06aa31ac6c8420eea4be307f42e64284c87ec08f75d6eaec640de7dc097c523d02dac