diff --git a/centos-packager.spec b/centos-packager.spec
index fecbcf3..ba537f0 100644
--- a/centos-packager.spec
+++ b/centos-packager.spec
@@ -1,20 +1,14 @@
-%global centos_git_common_url https://git.centos.org/centos-git-common
-%global centos_git_common_commit 28b610e9fb79594c49bc64c7c331d0aaab382e7e
-
 Name:           centos-packager
 Version:        0.7.0
-Release:        17%{?dist}
+Release:        9%{?dist}
 Summary:        Tools and files necessary for building CentOS packages
 Group:          Applications/Productivity
 
-License:        GPL-2.0-or-later
+License:        GPLv2+
 URL:            https://git.centos.org/centos/centos-packager
 Source0:        cbs-koji.conf
 Source1:        COPYING
 Source2:        centos-cert
-Source3:        %{centos_git_common_url}/raw/%{centos_git_common_commit}/f/lookaside_upload
-Source4:        %{centos_git_common_url}/raw/%{centos_git_common_commit}/f/lookaside_upload_sig
-Source5:        %{centos_git_common_url}/raw/%{centos_git_common_commit}/f/get_sources.sh
 
 Requires:       koji
 Requires:       rpm-build rpmdevtools rpmlint
@@ -45,46 +39,14 @@ install -p -m 0644 %{SOURCE0} %{buildroot}%{_sysconfdir}/koji.conf.d/cbs-koji.co
 mkdir -p %{buildroot}/%{_bindir}
 ln -s koji %{buildroot}%{_bindir}/cbs
 install -p -m 0755 %{SOURCE2} %{buildroot}%{_bindir}/centos-cert
-install -p -m 0755 %{SOURCE3} %{buildroot}%{_bindir}/centos-lookaside-upload
-install -p -m 0755 %{SOURCE4} %{buildroot}%{_bindir}/centos-lookaside-upload-sig
-install -p -m 0755 %{SOURCE5} %{buildroot}%{_bindir}/centos-get-sources
 
 %files
 %license COPYING
 %config(noreplace) %{_sysconfdir}/koji.conf.d/cbs-koji.conf
 %{_bindir}/cbs
 %{_bindir}/centos-cert
-%{_bindir}/centos-lookaside-upload
-%{_bindir}/centos-lookaside-upload-sig
-%{_bindir}/centos-get-sources
 
 %changelog
-* Wed Jul 23 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-17
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Thu Jan 16 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-16
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
-
-* Wed Jul 17 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-15
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Wed May 29 2024 Davide Cavalca <dcavalca@centosproject.org> - 0.7.0-14
-- Import lookaside_upload, lookaside_upload_sig and get_sources.sh from
-  centos-git-common
-- Convert license tag to SPDX
-
-* Tue Jan 23 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-13
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-12
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-11
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-10
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
 * Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.7.0-9
 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
 
diff --git a/get_sources.sh b/get_sources.sh
deleted file mode 100644
index daa1bfc..0000000
--- a/get_sources.sh
+++ /dev/null
@@ -1,303 +0,0 @@
-#!/bin/bash
-#
-# Might want to drop this in ~/bin/ and chmod u+x it
-#
-
-#  Initial Author: Karanbir Singh <kbsingh@centos.org>
-#         Updates:
-#                  Mike McLean <mikem@redhat.com>
-#                  Pat Riehecky <riehecky@fnal.gov>
-#                  Tyler Parsons <tparsons@fnal.gov>
-#                  Tuomo Soini <tis@foobar.fi>
-set -eux
-
-
-#####################################################################
-usage() {
-    echo ''                                               >&2
-    echo "$0 [-hcq] [-b branch] [--surl url]"             >&2
-    echo ''                                               >&2
-    echo 'Script to parse the non-text sources metadata file'   >&2
-    echo ' and download the required files from the lookaside'  >&2
-    echo ' cache.'                                              >&2
-    echo ''                                                     >&2
-    echo 'PLEASE NOTE: this script is non-destructive, it wont' >&2
-    echo ' replace files that already exist, regardless of'     >&2
-    echo ' their state, allowing you to have work-in-progress'  >&2
-    echo ' content that wont get overwritten.'                  >&2
-    echo ''                                                     >&2
-    echo 'You need to run this from inside a sources git repo'  >&2
-    echo ''                                               >&2
-    echo ' -h: This help message'                         >&2
-    echo ''                                               >&2
-    echo "  $0 -b c7"                                     >&2
-    echo "  $0 -q -b c7"                                  >&2
-    echo "  $0 -c -b remotes/origin/c7"                   >&2
-    echo "  $0 -c -b c7 --surl '$SURL'"                   >&2
-    echo "  $0"                                           >&2
-    exit 1
-}
-
-#####################################################################
-
-SURL="https://git.centos.org/sources"
-
-QUIET=0
-BRANCH=''
-CHECK=0
-
-# for setting any overrides, such as SURL, default BRANCH, or force CHECK
-if [ -f /etc/centos-git-common ]; then
-  . /etc/centos-git-common
-fi
-
-#####################################################################
-# setup args in the right order for making getopt evaluation
-# nice and easy.  You'll need to read the manpages for more info
-# utilizing 'while' construct rather than 'for arg' to avoid unnecessary
-# shifting of program args
-args=$(getopt -o hcqb: -l surl: -- "$@")
-eval set -- "$args"
-
-while [[ 0 -eq 0 ]]; do
-    case $1 in
-        -- )
-            # end of getopt args, shift off the -- and get out of the loop
-            shift
-            break
-           ;;
-         -c )
-            # verify the sha1sum of the downloaded file
-            CHECK=1
-            shift
-           ;;
-         -q )
-            # suppress warnings
-            QUIET=1
-            shift
-           ;;
-         -b )
-            # Check this particular branch
-            BRANCH=$2
-            shift
-            shift
-           ;;
-         --surl )
-            # override sources url
-            SURL=$2
-            shift
-            shift
-           ;;
-         -h )
-            # get help
-            usage
-           ;;
-    esac
-done
-
-# set curl options this way so defaults can be set in /etc/centos-git-common
-# across multiple scripts
-if [[ ${QUIET} -eq 1 ]]; then
-    QUIET='--silent'
-else
-    QUIET=''
-fi
-
-command -v git >/dev/null 2>&1
-if [[ $? -ne 0 ]]; then
-    echo 'You need git in PATH' >&2
-    exit 1
-fi
-
-command -v curl >/dev/null 2>&1
-if [[ $? -ne 0 ]]; then
-    echo 'You need curl in PATH' >&2
-    exit 1
-fi
-
-if [ ! -d .git ] && ([ ! -d SPECS ] || [[ ! -s sources ]] ); then
-      echo 'You need to run this from inside a sources git repo' >&2
-      exit 1
-    fi
-
-# sort out our branch
-if [ -n "$BRANCH" ]
-then
-  branches=("$BRANCH")
-else
-  # generate a list of all branches containing current HEAD
-  branches=()
-  while IFS='' read -r line
-  do
-    # input from: git branch --contains HEAD
-    branch="${line:2}"
-    if [[ "$branch" =~ "detached from" ]]
-    then
-      # ignore detached heads
-      continue
-    fi
-    if [ ".${line:0:1}" = ".*" ]
-    then
-      # current branch, put it first
-      branches=("${branch}" ${branches[@]+"${branches[@]}"})
-    else
-      branches=(${branches[@]+"${branches[@]}"} "${branch}")
-    fi
-  done <<< "$(git branch -r --contains HEAD | sed 's#origin/##g')"
-fi
-
-if [[ -f sources ]]; then
-    echo "Flat layout style"
-    if [[ ! -s sources ]]; then
-      echo "Empty sources file -- nothing to check"
-    else
-      # This section is for the "flat" dist-git layout, where the spec file and
-      # patches are all present at the top level directory and the sha of the tarball
-      # present in a 'sources' file.
-      # This code was re-used from the fedpkg-pkg minimal project which is licensed
-      # under GPLv3 or any later version.
-
-      pkgname=$(basename "$PWD")
-      # Read first word of first line. For old MD5 format it's the 32 character
-      # hash. Otherwise let's assume the sources have the BSD format where lines
-      # start with hash type.
-      hashtype="$(head -n1 sources | cut -d' ' -f1 | tr '[:upper:]' '[:lower:]')"
-      # The format is
-      #   SHA512 (filename) = ABCDEF
-      # We don't care about the equals sign. We also assume all hashes are
-      # the same type, so we don't need to read it again for each line.
-      while read -r _ filename _ hash || [[ -n "$filename" && -n "$hash" ]]; do
-          if [ -z "$filename" ] || [ -z "$hash" ]; then
-              continue
-          fi
-          # Remove parenthesis around tarball name
-          filename=${filename#(}
-          tarball=${filename%)}
-          if [ ! -e "$tarball" ]; then
-            for br in "${branches[@]}"
-            do
-              br=$(echo ${br}| sed -e s'|remotes/origin/||')
-              # Try the branch-specific lookaside structure
-              url="${SURL}/$pkgname/${br}/$hash"
-              echo "Retrieving ${url}"
-              HTTP_CODE=$(curl -L ${QUIET} -H Pragma: -o "./$tarball" -R -S --fail --retry 5 "${url}" --write-out "%{http_code}" || true)
-              echo "Returned ${HTTP_CODE}"
-              if [[ ${HTTP_CODE} -gt 199 && ${HTTP_CODE} -lt 300 ]] ; then
-                 echo "bailing"
-                 break
-              fi
-              # Try the hash-specific lookaside structure
-              url="${SURL}/$pkgname/$tarball/$hashtype/$hash/$tarball"
-              echo "Retrieving ${url}"
-              curl -L ${QUIET} -H Pragma: -o "./$tarball" -R -S --fail --retry 5 "${url}" && break
-            done
-          else
-            echo "$filename exists. skipping"
-          fi
-      done < sources
-      "${hashtype}sum" -c sources
-    fi
-else
-    echo "Exploded SRPM layout style"
-    # This section is for the "non-flat" dist-git layout, where the spec file
-    # is stored in a SPECS folder, the patches in a SOURCES folder and the sha
-    # of the tarball of the project is present in a '.<pkg_name>.metadata' file.
-
-    mkdir -p SOURCES
-    # should go into a function section at some point
-    weakHashDetection () {
-      strHash=${1};
-      case $((`echo ${strHash}|wc -m` - 1 )) in
-        128)
-          hashBin='sha512sum'
-          ;;
-        64)
-          hashBin='sha256sum'
-          ;;
-        40)
-          hashBin='sha1sum'
-          ;;
-        32)
-          hashBin='md5sum'
-          ;;
-        *)
-          hashBin='unknown'
-          ;;
-      esac
-      echo ${hashBin};
-    }
-
-    # check metadata file and extract package name
-    shopt -s nullglob
-    set -- .*.metadata
-    if (( $# == 0 ))
-    then
-        echo 'Missing metadata. Please run from inside a sources git repo' >&2
-        exit 1
-    elif (( $# > 1 ))
-    then
-        echo "Warning: multiple metadata files found. Using $1"
-    fi
-    meta=$1
-    pn=${meta%.metadata}
-    pn=${pn#.}
-
-    while read -r fsha fname ; do
-      if [ ".${fsha}" = ".da39a3ee5e6b4b0d3255bfef95601890afd80709" ]; then
-        # zero byte file
-        touch ${fname}
-      else
-        hashType=$(weakHashDetection ${fsha})
-        if [ "${hashType}" == "unknown" ]; then
-          echo 'Failure: Hash type unknown.' >&2
-          exit 1;
-        fi
-        hashName=$(echo ${hashType}| sed -e s'|sum||')
-
-        if [ ${CHECK} -eq 1 ]; then
-          which ${hashType} >/dev/null 2>&1
-          if [[ $? -ne 0 ]]; then
-            echo "Failure: You need ${hashType} in PATH." >&2
-            exit 1;
-          fi
-        fi
-        if [ -e ${fname} -a ${CHECK} -eq 1 ]; then
-            # check hash sum and force download if wrong
-            downsum=$(${hashType} ${fname} | awk '{print $1}')
-            if [ "${fsha}" != "${downsum}" ]; then
-                rm -f ${fname}
-            fi
-        fi
-        if [ ! -e "${fname}" ]; then
-          for br in "${branches[@]}"
-          do
-            br=$(echo ${br}| sed -e s'|remotes/origin/||')
-            # Try the branch-specific lookaside structure
-            url="${SURL}/${pn}/${br}/${fsha}"
-            echo "Retrieving ${url}"
-            HTTP_CODE=$(curl -L ${QUIET} -H Pragma: -o "${fname}" -R -S --fail --retry 5 "${url}" --write-out "%{http_code}" || true)
-            echo "Returned ${HTTP_CODE}"
-            if [[ ${HTTP_CODE} -gt 199 && ${HTTP_CODE} -lt 300 ]] ; then
-               echo "bailing"
-               break
-            fi
-            # Try the hash-specific lookaside structure
-            url="${SURL}/$pn/$fname/${hashName}/$fsha/$fname"
-            echo "Retrieving ${url}"
-            curl -L ${QUIET} -H Pragma: -o "${fname}" -R -S --fail --retry 5 "${url}" && break
-          done
-        else
-          echo "${fname} exists. skipping"
-        fi
-        if [ ${CHECK} -eq 1 ]; then
-            downsum=$(${hashType} ${fname} | awk '{print $1}')
-            if [ "${fsha}" != "${downsum}" ]; then
-                rm -f ${fname}
-                echo "Failure: ${fname} hash does not match hash from the .metadata file" >&2
-                exit 1;
-            fi
-        fi
-      fi
-    done < "${meta}"
-
-fi
diff --git a/lookaside_upload b/lookaside_upload
deleted file mode 100644
index 05dfae4..0000000
--- a/lookaside_upload
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/bash
-
-# This script will let you upload sources/blobs to new CentOS lookaside cache
-# requirements:
-#  - curl
-#  - valid TLS certs from https://accounts.centos.org (or dev instance for testing)
-#  - valid group membership to let you upload to specific "branch"
-
-# Some variables, switch for new url
-lookaside_baseurl="https://git.centos.org"
-
-function usage {
-
-cat <<  EOF
-
-You need to call the script like this : $0 -arguments
-
-        -f : filename/source to upload (required, default:none)
-        -n : package name for that source (requred, default:none, example "httpd")
-        -b : "branch" where to upload to (required, default:none, example "c7-sig-core")
-        -h : display this help
-
-EOF
-
-}
-
-function varcheck {
-if [ -z "$1" ] ; then
-        usage
-        exit 1
-fi
-
-}
-
-function f_log {
-  echo "[+] CentOS Lookaside upload tool -> $*"
-}
-
-
-
-while getopts “hf:n:b:” OPTION
-do
-     case $OPTION in
-         h)
-             usage
-             exit 1
-             ;;
-         f)
-             file=$OPTARG
-             ;;
-         n)
-             pkgname=$OPTARG
-             ;;
-         b)
-             branch=$OPTARG
-             ;;
-         ?)
-             usage
-             exit
-             ;;
-     esac
-done
-
-varcheck $file
-varcheck $pkgname
-varcheck $branch
-
-if [ ! -f ~/.centos.cert ] ;then
-  f_log "No mandatory TLS cert found (~/.centos.cert) .."
-  f_log "please use centos-cert to retrieve your ACO TLS cert"
-  exit 1
-fi
-
-if [ ! -f "${file}" ] ;then
-  f_log "Source to upload ${file} not found"
-  exit 2
-fi
-
-checksum=$(sha1sum ${file}|awk '{print $1}')
-
-f_log "Checking if file already uploaded"
-local_size=$(stat -c %s ${file})
-http_code=$(curl -s -o /dev/null -w "%{http_code}" ${lookaside_baseurl}/sources/${pkgname}/${branch}/${checksum})
-remote_size=$(curl --silent -i --head ${lookaside_baseurl}/sources/${pkgname}/${branch}/${checksum}|grep "Content-Length"|cut -f 2 -d ':'|tr -d [:blank:]|tr -d '\r')
-if [ "$http_code" -eq 200 ] && [ "$local_size" -eq "$remote_size" ] ; then
-  f_log "File already uploaded"
-  exit 3
-fi
-
-f_log "Initialing new upload to lookaside"
-f_log "URL : $lookaside_baseurl"
-f_log "Source to upload : ${file} "
-f_log "Package name: $pkgname"
-f_log "sha1sum: ${checksum}"
-f_log "Remote branch: ${branch}" 
-f_log " ====== Trying to upload ======="
-echo ""
-curl ${lookaside_baseurl}/sources/upload.cgi \
-	--fail \
-	--cert ~/.centos.cert \
-	--form "name=${pkgname}" \
-	--form "branch=${branch}" \
-	--form "sha1sum=${checksum}" \
-	--form "file=@${file}" \
-	--progress-bar | tee /dev/null
-
-upload_result="${PIPESTATUS[0]}"
-
-if [ "$upload_result" -ne "0" ] ;then
-  f_log "[ERROR] Something didn't work to push to ${lookaside_baseurl}/sources/${pkgname}/${branch}/${checksum}"
-  f_log "[ERROR] Verify at the server side"
-  exit 1
-fi
-
-f_log "Validating that source was correctly uploaded ...."
-remote_size=$(curl --silent -i --head ${lookaside_baseurl}/sources/${pkgname}/${branch}/${checksum}|grep "Content-Length"|cut -f 2 -d ':'|tr -d [:blank:]|tr -d '\r')
-if [ "$local_size" -eq "$remote_size" ] ; then
-  f_log "[SUCCESS] Source should be available at ${lookaside_baseurl}/sources/${pkgname}/${branch}/${checksum}"
-else
-  f_log "[ERROR] it seems there is a mismatch with source size and remote file size"
-fi
-
-
diff --git a/lookaside_upload_sig b/lookaside_upload_sig
deleted file mode 100644
index ab12641..0000000
--- a/lookaside_upload_sig
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/bash
-
-# This script will let you upload sources/blobs to new CentOS lookaside cache
-# requirements:
-#  - curl
-#  - valid TLS certs from https://accounts.centos.org (or dev instance for testing)
-
-# Some variables, switch for new url
-lookaside_baseurl=$LOOKASIDE_BASEURL
-hash_parameter="sha512"
-
-if [ -z $LOOKASIDE_BASEURL ]; then
-	lookaside_baseurl="https://git.centos.org"
-	echo "Base URL set to default: $lookaside_baseurl"
-fi
-
-function usage {
-
-	cat <<EOF
-
-	You need to call the script like this : $0 -arguments
-	
-			-f : filename/source to upload (required, default:none)
-			-n : package name for that source (requred, default:none, example "httpd")
-			-h : display this help
-
-	It is also possible to amend the default base url (currently set to https://git.centos.org):
-	LOOKASIDE_BASEURL=<urlOfYourChoice> ./lookaside_upload_sig ...
-EOF
-}
-
-function varcheck {
-	if [ -z "$1" ]; then
-		usage
-		exit 1
-	fi
-
-}
-
-function f_log {
-	echo "[+] CentOS Lookaside upload tool -> $*"
-}
-
-while getopts “hf:n:” OPTION; do
-	case $OPTION in
-	h)
-		usage
-		exit 1
-		;;
-	f)
-		file=$OPTARG
-		;;
-	n)
-		pkgname=$OPTARG
-		;;
-	?)
-		usage
-		exit
-		;;
-	esac
-done
-
-varcheck $file
-varcheck $pkgname
-
-if [ ! -f ~/.centos.cert ]; then
-	f_log "No mandatory TLS cert found (~/.centos.cert) .."
-	f_log "please use centos-cert to retrieve your ACO TLS cert"
-	exit 1
-fi
-
-if [ ! -f "${file}" ]; then
-	f_log "Source to upload ${file} not found"
-	exit 2
-fi
-
-checksum="$(${hash_parameter}sum ${file} | awk '{print $1}')"
-
-f_log "Checking if file already uploaded"
-local_size=$(stat -c %s ${file})
-http_code=$(curl -s -o /dev/null -w "%{http_code}" ${lookaside_baseurl}/sources/${pkgname}/${file}/${hash_parameter}/${checksum}/${file})
-remote_size=$(curl --silent -i --head ${lookaside_baseurl}/sources/${pkgname}/${file}/${hash_parameter}/${checksum}/${file} | grep "Content-Length" | cut -f 2 -d ':' | tr -d [:blank:] | tr -d '\r')
-
-if [ "$http_code" -eq 200 ] && [ "$local_size" -eq "$remote_size" ]; then
-	f_log "File already uploaded"
-	exit 3
-fi
-
-f_log "Initialing new upload to lookaside"
-f_log "URL : $lookaside_baseurl"
-f_log "Source to upload : ${file} "
-f_log "Hash parameter : ${hash_parameter}"
-f_log "Package name: $pkgname"
-f_log "${hash_parameter}sum: ${checksum}"
-f_log " ====== Trying to upload ======="
-echo ""
-
-# Concatenating sha512
-hash_cmd="$(${hash_parameter}sum ${file} | awk '{print $1}')"
-curl ${lookaside_baseurl}/sources/upload_sig.cgi \
-	--fail \
-	--cert ~/.centos.cert \
-	--form "name=${pkgname}" \
-	--form "hash=${hash_parameter}" \
-	--form "${hash_parameter}sum=${hash_cmd}" \
-	--form "file=@${file}" \
-	--progress-bar | tee /dev/null
-
-upload_result="${PIPESTATUS[0]}"
-
-if [ "$upload_result" -ne "0" ]; then
-	f_log "[ERROR] Something didn't work to push to ${lookaside_baseurl}/sources/${pkgname}/${checksum}"
-	f_log "[ERROR] Verify at the server side"
-	exit 1
-fi
-
-f_log "Validating that source was correctly uploaded ...."
-remote_size=$(curl --silent -i --head ${lookaside_baseurl}/sources/${pkgname}/${file}/${hash_parameter}/${checksum}/${file} | grep "Content-Length" | cut -f 2 -d ':' | tr -d [:blank:] | tr -d '\r')
-if [ "$local_size" -eq "$remote_size" ]; then
-	f_log "[SUCCESS] Source should be available at ${lookaside_baseurl}/sources/${pkgname}/${file}/${hash_parameter}/${checksum}/${file}"
-else
-	f_log "[ERROR] it seems there is a mismatch with source size and remote file size"
-fi