diff --git a/tests/.fmf/version b/.fmf/version similarity index 100% rename from tests/.fmf/version rename to .fmf/version diff --git a/.gitignore b/.gitignore index 1ca930c..c297b30 100644 --- a/.gitignore +++ b/.gitignore @@ -27,3 +27,11 @@ multipath-tools-091027.tar.gz /multipath-tools-0.9.0.tgz /multipath-tools-0.9.3.tgz /multipath-tools-0.9.4.tgz +/multipath-tools-0.9.5.tgz +/multipath-tools-0.9.6.tgz +/multipath-tools-0.9.7.tgz +/multipath-tools-0.9.8.tgz +/multipath-tools-0.9.9.tgz +/multipath-tools-0.10.0.tgz +/multipath-tools-0.11.1.tgz +/multipath-tools-0.13.0.tgz diff --git a/0016-RH-fixup-udev-rules-for-redhat.patch b/0001-RH-fixup-udev-rules-for-redhat.patch similarity index 58% rename from 0016-RH-fixup-udev-rules-for-redhat.patch rename to 0001-RH-fixup-udev-rules-for-redhat.patch index 618603c..ed5b7e9 100644 --- a/0016-RH-fixup-udev-rules-for-redhat.patch +++ b/0001-RH-fixup-udev-rules-for-redhat.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 64a07df23affd21842fdc604887276e62e5b41de Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 13 Apr 2017 07:22:23 -0500 Subject: [PATCH] RH: fixup udev rules for redhat @@ -9,58 +9,55 @@ different naming scheme for partitions than SuSE. Signed-off-by: Benjamin Marzinski --- - Makefile.inc | 4 ++-- - kpartx/kpartx.rules | 2 +- - multipath/Makefile | 4 ++-- - 3 files changed, 5 insertions(+), 5 deletions(-) + Makefile.inc | 2 +- + kpartx/kpartx.rules.in | 2 +- + multipath/Makefile | 4 ++-- + 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Makefile.inc b/Makefile.inc -index 2e25d2ea..540e1dfc 100644 +index 9e3dc466..ead89030 100644 --- a/Makefile.inc +++ b/Makefile.inc -@@ -34,9 +34,9 @@ endif +@@ -34,7 +34,7 @@ endif # Paths. All these can be overridden on the "make" command line. prefix := # Prefix for binaries -exec_prefix := $(prefix) +exec_prefix := $(prefix)/usr # Prefix for non-essential libraries (libdmmp) --usr_prefix := $(prefix) -+usr_prefix := $(prefix)/usr - # Where to install systemd-related files. systemd is usually installed under /usr - # Note: some systemd installations use separate "prefix" and "rootprefix". - # In this case, override only unitdir to use systemd's "rootprefix" instead of $(systemd_prefix) -diff --git a/kpartx/kpartx.rules b/kpartx/kpartx.rules -index 1969dee0..d2b28233 100644 ---- a/kpartx/kpartx.rules -+++ b/kpartx/kpartx.rules + usr_prefix := $(if $(prefix),$(prefix),/usr) + # Prefix for configuration files (multipath.conf) +diff --git a/kpartx/kpartx.rules.in b/kpartx/kpartx.rules.in +index 9d879609..2049eb8f 100644 +--- a/kpartx/kpartx.rules.in ++++ b/kpartx/kpartx.rules.in @@ -39,6 +39,6 @@ LABEL="mpath_kpartx_end" GOTO="kpartx_end" LABEL="run_kpartx" --RUN+="/sbin/kpartx -un -p -part /dev/$name" -+RUN+="/sbin/kpartx -un /dev/$name" +-RUN+="@BINDIR@/kpartx -un -p -part /dev/$name" ++RUN+="@BINDIR@/kpartx -un /dev/$name" LABEL="kpartx_end" diff --git a/multipath/Makefile b/multipath/Makefile -index 73db991a..b3c2cc81 100644 +index 67fb5e62..2ea9e528 100644 --- a/multipath/Makefile +++ b/multipath/Makefile -@@ -24,7 +24,7 @@ install: - $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ +@@ -27,7 +27,7 @@ install: $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) - $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/56-multipath.rules + $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/62-multipath.rules - $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(modulesloaddir) - $(Q)$(INSTALL_PROGRAM) -m 644 modules-load.conf $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(tmpfilesdir) -@@ -44,7 +44,7 @@ uninstall: - $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(INSTALL_PROGRAM) -m 644 tmpfiles.conf $(DESTDIR)$(tmpfilesdir)/multipath.conf + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man8 +@@ -50,7 +50,7 @@ uninstall: + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/scsi_dh.conf - $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules + $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules $(Q)$(RM) $(DESTDIR)$(mandir)/man8/$(EXEC).8 $(Q)$(RM) $(DESTDIR)$(mandir)/man5/$(EXEC).conf.5 - + $(Q)$(RM) $(DESTDIR)$(tmpfilesdir)/multipath.conf diff --git a/0001-multipathd-make-pr-registration-consistent.patch b/0001-multipathd-make-pr-registration-consistent.patch deleted file mode 100644 index 47c380a..0000000 --- a/0001-multipathd-make-pr-registration-consistent.patch +++ /dev/null @@ -1,159 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:10 -0600 -Subject: [PATCH] multipathd: make pr registration consistent - -multipathd was inconsistent on what it did with persistent reservations -when a multipath device was created. If a multipath device with a -configured reservation key was created during configure(), multipathd -would try to read the registered keys using an active path. If it saw a -matching key, it would set the prflag, but not attempt to register the -key on any of the other paths. This means that if a new path had -appeared while multipathd was not running, it wouldn't register the key -on this path. - -If the multipath device was created during ev_add_path(), multipathd -would used the added path to check if there was a matching key and if -there was, register the key only on the added path and then set the -prflag. This could be problematic if the device was created with -multiple paths, for instance because find_mutipaths was set to "yes" and -a second path just appeared. In this case, if the device happened to be -only registered on the second path, it would not get registered on the -first path. - -If the multipath device was added to multipathd during a call to -ev_add_map(), multipathd wouldn't set the prflag or register the key on -any paths. - -After a device was created with the prflag set, if a new path appeared -before the creation uevent, and multipathd was forced to delay adding -it, when it finally updated the multipath device, the key would be -registered on all paths, fixing any paths missed during creation. -However, if a new path appeared after the creation uevent, the key would -only be registered on that new path. Any paths that were missed on -creation would stay missed. - -persistent key registration needs to be handled consistently. This -patch does so by making sure that however a multipath device is added to -multipathd, it will check to see if the configured key is registered. If -it is, multipathd will set the prflag and register the key on all the -currently active paths. - -When a new path is added, multipathd will use it to check for active -keys, as before. But if it finds a matching key and prflag isn't -currently set, it will register the key on all paths. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - multipathd/main.c | 43 +++++++++++++++++++++++++++++-------------- - 1 file changed, 29 insertions(+), 14 deletions(-) - -diff --git a/multipathd/main.c b/multipathd/main.c -index 1e1b254f..f7212d7b 100644 ---- a/multipathd/main.c -+++ b/multipathd/main.c -@@ -586,13 +586,26 @@ flush_map_nopaths(struct multipath *mpp, struct vectors *vecs) { - return false; - } - -+static void -+pr_register_active_paths(struct multipath *mpp) -+{ -+ unsigned int i, j; -+ struct path *pp; -+ struct pathgroup *pgp; -+ -+ vector_foreach_slot (mpp->pg, pgp, i) { -+ vector_foreach_slot (pgp->paths, pp, j) { -+ if ((pp->state == PATH_UP) || (pp->state == PATH_GHOST)) -+ mpath_pr_event_handle(pp); -+ } -+ } -+} -+ - static int - update_map (struct multipath *mpp, struct vectors *vecs, int new_map) - { - int retries = 3; - char *params __attribute__((cleanup(cleanup_charp))) = NULL; -- struct path *pp; -- int i; - - retry: - condlog(4, "%s: updating new map", mpp->alias); -@@ -609,15 +622,6 @@ retry: - - mpp->action = ACT_RELOAD; - -- if (mpp->prflag) { -- vector_foreach_slot(mpp->paths, pp, i) { -- if ((pp->state == PATH_UP) || (pp->state == PATH_GHOST)) { -- /* persistent reservation check*/ -- mpath_pr_event_handle(pp); -- } -- } -- } -- - if (setup_map(mpp, ¶ms, vecs)) { - condlog(0, "%s: failed to setup new map in update", mpp->alias); - retries = -1; -@@ -643,6 +647,11 @@ fail: - - sync_map_state(mpp); - -+ if (!mpp->prflag) -+ update_map_pr(mpp); -+ if (mpp->prflag) -+ pr_register_active_paths(mpp); -+ - if (retries < 0) - condlog(0, "%s: failed reload in new map update", mpp->alias); - return 0; -@@ -1191,6 +1200,7 @@ ev_add_path (struct path * pp, struct vectors * vecs, int need_do_map) - int start_waiter = 0; - int ret; - int ro; -+ unsigned char prflag = 0; - - /* - * need path UID to go any further -@@ -1234,6 +1244,8 @@ rescan: - - verify_paths(mpp); - mpp->action = ACT_RELOAD; -+ prflag = mpp->prflag; -+ mpath_pr_event_handle(pp); - } else { - if (!should_multipath(pp, vecs->pathvec, vecs->mpvec)) { - orphan_path(pp, "only one path"); -@@ -1252,9 +1264,6 @@ rescan: - goto fail; /* leave path added to pathvec */ - } - -- /* persistent reservation check*/ -- mpath_pr_event_handle(pp); -- - /* ro check - if new path is ro, force map to be ro as well */ - ro = sysfs_get_ro(pp); - if (ro == 1) -@@ -1319,6 +1328,10 @@ rescan: - sync_map_state(mpp); - - if (retries >= 0) { -+ if (start_waiter) -+ update_map_pr(mpp); -+ if (mpp->prflag && !prflag) -+ pr_register_active_paths(mpp); - condlog(2, "%s [%s]: path added to devmap %s", - pp->dev, pp->dev_t, mpp->alias); - return 0; -@@ -2852,6 +2865,8 @@ configure (struct vectors * vecs, enum force_reload_types reload_type) - if (remember_wwid(mpp->wwid) == 1) - trigger_paths_udev_change(mpp, true); - update_map_pr(mpp); -+ if (mpp->prflag) -+ pr_register_active_paths(mpp); - } - - /* diff --git a/0017-RH-Remove-the-property-blacklist-exception-builtin.patch b/0002-RH-Remove-the-property-blacklist-exception-builtin.patch similarity index 77% rename from 0017-RH-Remove-the-property-blacklist-exception-builtin.patch rename to 0002-RH-Remove-the-property-blacklist-exception-builtin.patch index cbd2480..b8e580a 100644 --- a/0017-RH-Remove-the-property-blacklist-exception-builtin.patch +++ b/0002-RH-Remove-the-property-blacklist-exception-builtin.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From f7be16ac9fce97585a4552d49f3d3c54a93c9c17 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Wed, 2 Jul 2014 12:49:53 -0500 Subject: [PATCH] RH: Remove the property blacklist exception builtin @@ -13,26 +13,25 @@ it. Signed-off-by: Benjamin Marzinski --- - libmultipath/blacklist.c | 6 ++---- - multipath/multipath.conf.5 | 11 ++++++----- - tests/blacklist.c | 7 ++----- - 3 files changed, 10 insertions(+), 14 deletions(-) + libmultipath/blacklist.c | 5 ++--- + multipath/multipath.conf.5.in | 11 ++++++----- + tests/blacklist.c | 7 ++----- + 3 files changed, 10 insertions(+), 13 deletions(-) diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c -index 8d15d2ea..eff690fd 100644 +index 17e1b54a..10d13e98 100644 --- a/libmultipath/blacklist.c +++ b/libmultipath/blacklist.c -@@ -201,9 +201,6 @@ setup_default_blist (struct config * conf) - if (store_ble(conf->blist_devnode, "!^(sd[a-z]|dasd[a-z]|nvme[0-9])", ORIGIN_DEFAULT)) - return 1; - +@@ -230,8 +230,6 @@ setup_default_blist (struct config * conf) + ORIGIN_DEFAULT)) + return 1; + } - if (store_ble(conf->elist_property, "(SCSI_IDENT_|ID_WWN)", ORIGIN_DEFAULT)) - return 1; -- + vector_foreach_slot (conf->hwtable, hwe, i) { if (hwe->bl_product) { - if (find_blacklist_device(conf->blist_device, -@@ -409,7 +406,8 @@ filter_property(const struct config *conf, struct udev_device *udev, +@@ -438,7 +436,8 @@ filter_property(const struct config *conf, struct udev_device *udev, *uid_attribute != '\0'; bool uid_attr_seen = false; @@ -42,11 +41,11 @@ index 8d15d2ea..eff690fd 100644 udev_list_entry_foreach(list_entry, udev_device_get_properties_list_entry(udev)) { -diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 -index b4dccd1b..284282c6 100644 ---- a/multipath/multipath.conf.5 -+++ b/multipath/multipath.conf.5 -@@ -1367,9 +1367,14 @@ keywords. Both are regular expressions. For a full description of these keywords +diff --git a/multipath/multipath.conf.5.in b/multipath/multipath.conf.5.in +index 3c9ae097..ba291e11 100644 +--- a/multipath/multipath.conf.5.in ++++ b/multipath/multipath.conf.5.in +@@ -1470,9 +1470,14 @@ keywords. Both are regular expressions. For a full description of these keywords Regular expression for an udev property. All devices that have matching udev properties will be excluded/included. The handling of the \fIproperty\fR keyword is special, @@ -62,7 +61,7 @@ index b4dccd1b..284282c6 100644 . .RS .PP -@@ -1380,10 +1385,6 @@ Blacklisting by missing properties is only applied to devices which do have the +@@ -1483,10 +1488,6 @@ Blacklisting by missing properties is only applied to devices which do have the property specified by \fIuid_attribute\fR (e.g. \fIID_SERIAL\fR) set. Previously, it was applied to every device, possibly causing devices to be blacklisted because of temporary I/O error conditions. @@ -74,10 +73,10 @@ index b4dccd1b..284282c6 100644 .TP .B protocol diff --git a/tests/blacklist.c b/tests/blacklist.c -index 882aa3a1..6a22b660 100644 +index ab3da619..52ae03e0 100644 --- a/tests/blacklist.c +++ b/tests/blacklist.c -@@ -375,9 +375,8 @@ static void test_property_missing(void **state) +@@ -371,9 +371,8 @@ static void test_property_missing(void **state) { static struct udev_device udev = { "sdb", { "ID_FOO", "ID_BAZ", "ID_BAR", "ID_SERIAL", NULL } }; conf.blist_property = blist_property_wwn; @@ -88,7 +87,7 @@ index 882aa3a1..6a22b660 100644 assert_int_equal(filter_property(&conf, &udev, 3, "ID_BLAH"), MATCH_NOTHING); assert_int_equal(filter_property(&conf, &udev, 3, ""), -@@ -469,9 +468,7 @@ static void test_filter_path_missing1(void **state) +@@ -465,9 +464,7 @@ static void test_filter_path_missing1(void **state) conf.blist_device = blist_device_foo_bar; conf.blist_protocol = blist_protocol_fcp; conf.blist_wwid = blist_wwid_xyzzy; diff --git a/0002-libmultipath-make-prflag-an-enum.patch b/0002-libmultipath-make-prflag-an-enum.patch deleted file mode 100644 index 304f731..0000000 --- a/0002-libmultipath-make-prflag-an-enum.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:11 -0600 -Subject: [PATCH] libmultipath: make prflag an enum - -In preparation for a future patch, make prflag an enum, and change the -reply of cli_getprstatus() to a string. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmpathpersist/mpath_persist_int.c | 2 +- - libmultipath/structs.h | 8 +++++++- - multipathd/cli_handlers.c | 17 +++++++++-------- - multipathd/main.c | 14 +++++++------- - 4 files changed, 24 insertions(+), 17 deletions(-) - -diff --git a/libmpathpersist/mpath_persist_int.c b/libmpathpersist/mpath_persist_int.c -index 6924b379..a84d9474 100644 ---- a/libmpathpersist/mpath_persist_int.c -+++ b/libmpathpersist/mpath_persist_int.c -@@ -783,7 +783,7 @@ int update_map_pr(struct multipath *mpp) - - if (isFound) - { -- mpp->prflag = 1; -+ mpp->prflag = PRFLAG_SET; - condlog(2, "%s: prflag flag set.", mpp->alias ); - } - -diff --git a/libmultipath/structs.h b/libmultipath/structs.h -index 9e2c1ab0..f2265300 100644 ---- a/libmultipath/structs.h -+++ b/libmultipath/structs.h -@@ -375,6 +375,12 @@ struct path { - - typedef int (pgpolicyfn) (struct multipath *, vector); - -+ -+enum prflag_value { -+ PRFLAG_UNSET, -+ PRFLAG_SET, -+}; -+ - struct multipath { - char wwid[WWID_SIZE]; - char alias_old[WWID_SIZE]; -@@ -449,7 +455,7 @@ struct multipath { - int prkey_source; - struct be64 reservation_key; - uint8_t sa_flags; -- unsigned char prflag; -+ int prflag; - int all_tg_pt; - struct gen_multipath generic_mp; - bool fpin_must_reload; -diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c -index e65fb75c..7ee2729f 100644 ---- a/multipathd/cli_handlers.c -+++ b/multipathd/cli_handlers.c -@@ -1277,6 +1277,10 @@ cli_shutdown (void * v, struct strbuf *reply, void * data) - static int - cli_getprstatus (void * v, struct strbuf *reply, void * data) - { -+ static const char * const prflag_str[] = { -+ [PRFLAG_UNSET] = "unset\n", -+ [PRFLAG_SET] = "set\n", -+ }; - struct multipath * mpp; - struct vectors * vecs = (struct vectors *)data; - char * param = get_keyparam(v, KEY_MAP); -@@ -1287,10 +1291,7 @@ cli_getprstatus (void * v, struct strbuf *reply, void * data) - if (!mpp) - return 1; - -- condlog(3, "%s: prflag = %u", param, (unsigned int)mpp->prflag); -- -- if (print_strbuf(reply, "%d", mpp->prflag) < 0) -- return 1; -+ append_strbuf_str(reply, prflag_str[mpp->prflag]); - - condlog(3, "%s: reply = %s", param, get_strbuf_str(reply)); - -@@ -1310,8 +1311,8 @@ cli_setprstatus(void * v, struct strbuf *reply, void * data) - if (!mpp) - return 1; - -- if (!mpp->prflag) { -- mpp->prflag = 1; -+ if (mpp->prflag != PRFLAG_SET) { -+ mpp->prflag = PRFLAG_SET; - condlog(2, "%s: prflag set", param); - } - -@@ -1332,8 +1333,8 @@ cli_unsetprstatus(void * v, struct strbuf *reply, void * data) - if (!mpp) - return 1; - -- if (mpp->prflag) { -- mpp->prflag = 0; -+ if (mpp->prflag != PRFLAG_UNSET) { -+ mpp->prflag = PRFLAG_UNSET; - condlog(2, "%s: prflag unset", param); - } - -diff --git a/multipathd/main.c b/multipathd/main.c -index f7212d7b..722235c7 100644 ---- a/multipathd/main.c -+++ b/multipathd/main.c -@@ -647,9 +647,9 @@ fail: - - sync_map_state(mpp); - -- if (!mpp->prflag) -+ if (mpp->prflag == PRFLAG_UNSET) - update_map_pr(mpp); -- if (mpp->prflag) -+ if (mpp->prflag == PRFLAG_SET) - pr_register_active_paths(mpp); - - if (retries < 0) -@@ -1200,7 +1200,7 @@ ev_add_path (struct path * pp, struct vectors * vecs, int need_do_map) - int start_waiter = 0; - int ret; - int ro; -- unsigned char prflag = 0; -+ unsigned char prflag = PRFLAG_UNSET; - - /* - * need path UID to go any further -@@ -1330,7 +1330,7 @@ rescan: - if (retries >= 0) { - if (start_waiter) - update_map_pr(mpp); -- if (mpp->prflag && !prflag) -+ if (mpp->prflag == PRFLAG_SET && prflag == PRFLAG_UNSET) - pr_register_active_paths(mpp); - condlog(2, "%s [%s]: path added to devmap %s", - pp->dev, pp->dev_t, mpp->alias); -@@ -2492,7 +2492,7 @@ check_path (struct vectors * vecs, struct path * pp, unsigned int ticks) - } - - if (newstate == PATH_UP || newstate == PATH_GHOST) { -- if (pp->mpp->prflag) { -+ if (pp->mpp->prflag == PRFLAG_SET) { - /* - * Check Persistent Reservation. - */ -@@ -2865,7 +2865,7 @@ configure (struct vectors * vecs, enum force_reload_types reload_type) - if (remember_wwid(mpp->wwid) == 1) - trigger_paths_udev_change(mpp, true); - update_map_pr(mpp); -- if (mpp->prflag) -+ if (mpp->prflag == PRFLAG_SET) - pr_register_active_paths(mpp); - } - -@@ -3840,7 +3840,7 @@ void * mpath_pr_event_handler_fn (void * pathp ) - { - condlog(0,"%s: Reservation registration failed. Error: %d", pp->dev, ret); - } -- mpp->prflag = 1; -+ mpp->prflag = PRFLAG_SET; - - free(param); - out: diff --git a/0018-RH-don-t-start-without-a-config-file.patch b/0003-RH-don-t-start-without-a-config-file.patch similarity index 54% rename from 0018-RH-don-t-start-without-a-config-file.patch rename to 0003-RH-don-t-start-without-a-config-file.patch index c957e2f..05d4e7a 100644 --- a/0018-RH-don-t-start-without-a-config-file.patch +++ b/0003-RH-don-t-start-without-a-config-file.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 5613e07ce9cabf2fdc402f6f102cc54bd1059800 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Wed, 15 Oct 2014 10:39:30 -0500 Subject: [PATCH] RH: don't start without a config file @@ -12,19 +12,20 @@ simple way to disable multipath. Simply removing or renaming Signed-off-by: Benjamin Marzinski --- - libmultipath/config.c | 13 +++++++++++++ - libmultipath/config.h | 1 + - multipath/multipath.rules.in | 1 + - multipathd/multipathd.8 | 2 ++ - multipathd/multipathd.service | 1 + - multipathd/multipathd.socket | 1 + - 6 files changed, 19 insertions(+) + libmultipath/config.c | 13 +++++++++++++ + libmultipath/config.h | 1 + + multipath/main.c | 6 ++++++ + multipath/multipath.rules.in | 1 + + multipathd/multipathd.8.in | 2 ++ + multipathd/multipathd.service.in | 1 + + multipathd/multipathd.socket.in | 1 + + 7 files changed, 25 insertions(+) diff --git a/libmultipath/config.c b/libmultipath/config.c -index 5c5c0726..183b319d 100644 +index 8b424d18..b8317f4d 100644 --- a/libmultipath/config.c +++ b/libmultipath/config.c -@@ -966,6 +966,19 @@ int _init_config (const char *file, struct config *conf) +@@ -937,6 +937,19 @@ int init_config__ (const char *file, struct config *conf) } factorize_hwtable(conf->hwtable, builtin_hwtable_size, file); validate_pctable(conf->overrides, 0, file); @@ -45,7 +46,7 @@ index 5c5c0726..183b319d 100644 conf->processed_main_config = 1; diff --git a/libmultipath/config.h b/libmultipath/config.h -index 87947469..0dc89c16 100644 +index 5b4ebf8c..2302eacc 100644 --- a/libmultipath/config.h +++ b/libmultipath/config.h @@ -10,6 +10,7 @@ @@ -56,8 +57,37 @@ index 87947469..0dc89c16 100644 enum devtypes { DEV_NONE, +diff --git a/multipath/main.c b/multipath/main.c +index f2adcdeb..31012874 100644 +--- a/multipath/main.c ++++ b/multipath/main.c +@@ -834,11 +834,14 @@ main (int argc, char *argv[]) + char *dev = NULL; + struct config *conf; + bool enable_foreign = false; ++ bool have_config; ++ struct stat buf; + + libmultipath_init(); + if (atexit(dm_lib_exit) || atexit(libmultipath_exit)) + condlog(1, "failed to register cleanup handler for libmultipath: %m"); + logsink = LOGSINK_STDERR_WITH_TIME; ++ have_config = (stat(DEFAULT_CONFIGFILE, &buf) == 0); + if (init_config(DEFAULT_CONFIGFILE)) + exit(RTVL_FAIL); + if (atexit(uninit_config)) +@@ -1092,6 +1095,9 @@ main (int argc, char *argv[]) + while ((r = configure(conf, cmd, dev_type, dev)) == RTVL_RETRY) + condlog(3, "restart multipath configuration process"); + ++ if (!have_config && r == RTVL_OK && ++ (cmd == CMD_LIST_SHORT || cmd == CMD_LIST_LONG)) ++ r = RTVL_FAIL; + out: + put_multipath_config(conf); + if (dev) diff --git a/multipath/multipath.rules.in b/multipath/multipath.rules.in -index 8d3cf33a..5c4447a2 100644 +index 2ac1972f..cc248231 100644 --- a/multipath/multipath.rules.in +++ b/multipath/multipath.rules.in @@ -9,6 +9,7 @@ IMPORT{cmdline}="nompath" @@ -68,11 +98,11 @@ index 8d3cf33a..5c4447a2 100644 ENV{DEVTYPE}!="partition", GOTO="test_dev" IMPORT{parent}="DM_MULTIPATH_DEVICE_PATH" -diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8 -index bdf102eb..a16a0bd5 100644 ---- a/multipathd/multipathd.8 -+++ b/multipathd/multipathd.8 -@@ -48,6 +48,8 @@ map regains its maximum performance and redundancy. +diff --git a/multipathd/multipathd.8.in b/multipathd/multipathd.8.in +index 8815e099..342e363e 100644 +--- a/multipathd/multipathd.8.in ++++ b/multipathd/multipathd.8.in +@@ -49,6 +49,8 @@ map regains its maximum performance and redundancy. With the \fB-k\fR option, \fBmultipathd\fR acts as a client utility that sends commands to a running instance of the multipathd daemon (see \fBCOMMANDS\fR below). @@ -81,22 +111,22 @@ index bdf102eb..a16a0bd5 100644 . . .\" ---------------------------------------------------------------------------- -diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service -index aec62dbb..d76f94f9 100644 ---- a/multipathd/multipathd.service -+++ b/multipathd/multipathd.service -@@ -6,6 +6,7 @@ Wants=systemd-udevd-kernel.socket - After=systemd-udevd-kernel.socket +diff --git a/multipathd/multipathd.service.in b/multipathd/multipathd.service.in +index eb58943c..ab166435 100644 +--- a/multipathd/multipathd.service.in ++++ b/multipathd/multipathd.service.in +@@ -6,6 +6,7 @@ Wants=systemd-udevd-kernel.socket multipathd-queueing.service @MODPROBE_UNIT@ + After=systemd-udevd-kernel.socket @MODPROBE_UNIT@ After=multipathd.socket systemd-remount-fs.service Before=initrd-cleanup.service +ConditionPathExists=/etc/multipath.conf DefaultDependencies=no Conflicts=shutdown.target Conflicts=initrd-cleanup.service -diff --git a/multipathd/multipathd.socket b/multipathd/multipathd.socket -index c777e5e3..3c20a2ff 100644 ---- a/multipathd/multipathd.socket -+++ b/multipathd/multipathd.socket +diff --git a/multipathd/multipathd.socket.in b/multipathd/multipathd.socket.in +index 11002fce..5ed24757 100644 +--- a/multipathd/multipathd.socket.in ++++ b/multipathd/multipathd.socket.in @@ -1,6 +1,7 @@ [Unit] Description=multipathd control socket diff --git a/0003-multipathd-handle-no-active-paths-in-update_map_pr.patch b/0003-multipathd-handle-no-active-paths-in-update_map_pr.patch deleted file mode 100644 index 59dd10f..0000000 --- a/0003-multipathd-handle-no-active-paths-in-update_map_pr.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:12 -0600 -Subject: [PATCH] multipathd: handle no active paths in update_map_pr - -When a multipath device is first created, if it has a reservation key -configured, update_map_pr() will check for a matching key on the active -paths. If there were no active paths to check with, multipathd was -leaving mpp->prflag in PRFLAG_UNSET, as if there were no matching keys. -It's possible that when update_map_pr() is called, all the paths will be -in the PATH_PENDING state because the checkers haven't completed yet. In -this case, multipathd was treating the device as having no registered -keys without ever checking. - -To solve this, multipath devices now start with prflag = PRFLAG_UNKNOWN. -It will remain in this state until multipathd actually tries to get the -registered keys down a path. If the map is in this state, it will check -newly active paths, and if it finds a matching key, it will register -the key down all active paths. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmpathpersist/mpath_persist_int.c | 8 ++++++++ - libmultipath/structs.h | 1 + - multipathd/cli_handlers.c | 1 + - multipathd/main.c | 19 ++++++++++++++----- - 4 files changed, 24 insertions(+), 5 deletions(-) - -diff --git a/libmpathpersist/mpath_persist_int.c b/libmpathpersist/mpath_persist_int.c -index a84d9474..8b52b746 100644 ---- a/libmpathpersist/mpath_persist_int.c -+++ b/libmpathpersist/mpath_persist_int.c -@@ -738,6 +738,7 @@ int update_map_pr(struct multipath *mpp) - if (!get_be64(mpp->reservation_key)) - { - /* Nothing to do. Assuming pr mgmt feature is disabled*/ -+ mpp->prflag = PRFLAG_UNSET; - condlog(4, "%s: reservation_key not set in multipath.conf", - mpp->alias); - return MPATH_PR_SUCCESS; -@@ -749,6 +750,13 @@ int update_map_pr(struct multipath *mpp) - condlog(0,"%s : failed to alloc resp in update_map_pr", mpp->alias); - return MPATH_PR_OTHER; - } -+ if (count_active_paths(mpp) == 0) -+ { -+ condlog(0,"%s: No available paths to check pr status", -+ mpp->alias); -+ return MPATH_PR_OTHER; -+ } -+ mpp->prflag = PRFLAG_UNSET; - ret = mpath_prin_activepath(mpp, MPATH_PRIN_RKEY_SA, resp, noisy); - - if (ret != MPATH_PR_SUCCESS ) -diff --git a/libmultipath/structs.h b/libmultipath/structs.h -index f2265300..e2294323 100644 ---- a/libmultipath/structs.h -+++ b/libmultipath/structs.h -@@ -377,6 +377,7 @@ typedef int (pgpolicyfn) (struct multipath *, vector); - - - enum prflag_value { -+ PRFLAG_UNKNOWN, - PRFLAG_UNSET, - PRFLAG_SET, - }; -diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c -index 7ee2729f..ec5db1b8 100644 ---- a/multipathd/cli_handlers.c -+++ b/multipathd/cli_handlers.c -@@ -1278,6 +1278,7 @@ static int - cli_getprstatus (void * v, struct strbuf *reply, void * data) - { - static const char * const prflag_str[] = { -+ [PRFLAG_UNKNOWN] = "unknown\n", - [PRFLAG_UNSET] = "unset\n", - [PRFLAG_SET] = "set\n", - }; -diff --git a/multipathd/main.c b/multipathd/main.c -index 722235c7..bdeffe76 100644 ---- a/multipathd/main.c -+++ b/multipathd/main.c -@@ -647,7 +647,7 @@ fail: - - sync_map_state(mpp); - -- if (mpp->prflag == PRFLAG_UNSET) -+ if (mpp->prflag != PRFLAG_SET) - update_map_pr(mpp); - if (mpp->prflag == PRFLAG_SET) - pr_register_active_paths(mpp); -@@ -1330,7 +1330,7 @@ rescan: - if (retries >= 0) { - if (start_waiter) - update_map_pr(mpp); -- if (mpp->prflag == PRFLAG_SET && prflag == PRFLAG_UNSET) -+ if (mpp->prflag == PRFLAG_SET && prflag != PRFLAG_SET) - pr_register_active_paths(mpp); - condlog(2, "%s [%s]: path added to devmap %s", - pp->dev, pp->dev_t, mpp->alias); -@@ -2492,13 +2492,17 @@ check_path (struct vectors * vecs, struct path * pp, unsigned int ticks) - } - - if (newstate == PATH_UP || newstate == PATH_GHOST) { -- if (pp->mpp->prflag == PRFLAG_SET) { -+ if (pp->mpp->prflag != PRFLAG_UNSET) { -+ int prflag = pp->mpp->prflag; - /* - * Check Persistent Reservation. - */ - condlog(2, "%s: checking persistent " - "reservation registration", pp->dev); - mpath_pr_event_handle(pp); -+ if (pp->mpp->prflag == PRFLAG_SET && -+ prflag != PRFLAG_SET) -+ pr_register_active_paths(pp->mpp); - } - } - -@@ -3788,6 +3792,7 @@ void * mpath_pr_event_handler_fn (void * pathp ) - goto out; - } - -+ mpp->prflag = PRFLAG_UNSET; - ret = prin_do_scsi_ioctl(pp->dev, MPATH_PRIN_RKEY_SA, resp, 0); - if (ret != MPATH_PR_SUCCESS ) - { -@@ -3858,12 +3863,12 @@ int mpath_pr_event_handle(struct path *pp) - struct multipath * mpp; - - if (pp->bus != SYSFS_BUS_SCSI) -- return 0; -+ goto no_pr; - - mpp = pp->mpp; - - if (!get_be64(mpp->reservation_key)) -- return -1; -+ goto no_pr; - - pthread_attr_init(&attr); - pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); -@@ -3876,4 +3881,8 @@ int mpath_pr_event_handle(struct path *pp) - pthread_attr_destroy(&attr); - rc = pthread_join(thread, NULL); - return 0; -+ -+no_pr: -+ pp->mpp->prflag = PRFLAG_UNSET; -+ return 0; - } diff --git a/0019-RH-Fix-nvme-function-missing-argument.patch b/0004-RH-Fix-nvme-function-missing-argument.patch similarity index 84% rename from 0019-RH-Fix-nvme-function-missing-argument.patch rename to 0004-RH-Fix-nvme-function-missing-argument.patch index ced7159..33a8d5f 100644 --- a/0019-RH-Fix-nvme-function-missing-argument.patch +++ b/0004-RH-Fix-nvme-function-missing-argument.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 283b5dd645663a2cf16f2813581772d7a84db6ad Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 25 Jan 2019 14:54:56 -0600 Subject: [PATCH] RH: Fix nvme function missing argument @@ -12,10 +12,10 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libmultipath/nvme/argconfig.h b/libmultipath/nvme/argconfig.h -index adb192b6..bfd10ef8 100644 +index b3caa7be..f91504c9 100644 --- a/libmultipath/nvme/argconfig.h +++ b/libmultipath/nvme/argconfig.h -@@ -76,7 +76,7 @@ struct argconfig_commandline_options { +@@ -63,7 +63,7 @@ struct argconfig_commandline_options { extern "C" { #endif diff --git a/0004-multipathd-add-missing-newline-to-cli_del_map-reply.patch b/0004-multipathd-add-missing-newline-to-cli_del_map-reply.patch deleted file mode 100644 index 085fd70..0000000 --- a/0004-multipathd-add-missing-newline-to-cli_del_map-reply.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:13 -0600 -Subject: [PATCH] multipathd: add missing newline to cli_del_map reply - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - multipathd/cli_handlers.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c -index ec5db1b8..44bf43df 100644 ---- a/multipathd/cli_handlers.c -+++ b/multipathd/cli_handlers.c -@@ -760,7 +760,7 @@ cli_del_map (void * v, struct strbuf *reply, void * data) - } - rc = ev_remove_map(param, alias, minor, vecs); - if (rc == 2) -- append_strbuf_str(reply, "delayed"); -+ append_strbuf_str(reply, "delayed\n"); - - free(alias); - return rc; diff --git a/0005-RH-use-rpm-optflags-if-present.patch b/0005-RH-use-rpm-optflags-if-present.patch new file mode 100644 index 0000000..7a6f57f --- /dev/null +++ b/0005-RH-use-rpm-optflags-if-present.patch @@ -0,0 +1,67 @@ +From bf46f8029998498045bb055415ba3ff515c79eaa Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Wed, 19 Apr 2017 06:10:01 -0500 +Subject: [PATCH] RH: use rpm optflags if present + +Use the passed in optflags when compiling as an RPM, and keep the +default flags as close as possible to the current fedora flags, while +still being generic. + +Signed-off-by: Benjamin Marzinski +--- + Makefile.inc | 25 ++++++++++++++++++------- + 1 file changed, 18 insertions(+), 7 deletions(-) + +diff --git a/Makefile.inc b/Makefile.inc +index ead89030..03aee175 100644 +--- a/Makefile.inc ++++ b/Makefile.inc +@@ -102,17 +102,29 @@ SYSTEMD_LIBDEPS := $(if $(SYSTEMD),$(if $(shell test $(SYSTEMD) -gt 209 && echo + MODPROBE_UNIT := $(shell test "0$(SYSTEMD)" -lt 245 2>/dev/null || \ + echo "modprobe@dm_multipath.service") + +-OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 ++ifndef RPM_OPT_FLAGS ++ OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 \ ++ -Wall $(FORTIFY_OPT) -fexceptions -grecord-gcc-switches \ ++ -fasynchronous-unwind-tables ++ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-hardened-cc1 && echo 1),1) ++ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ++ endif ++ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-annobin-cc1 && echo 1),1) ++ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 ++ endif ++else ++ OPTFLAGS := $(RPM_OPT_FLAGS) --param=ssp-buffer-size=4 ++endif + + # Set WARN_ONLY=1 to avoid compilation erroring out due to warnings. Useful during development. + WARN_ONLY := + ERROR := $(if $(WARN_ONLY),,error=) + WERROR := $(if $(WARN_ONLY),,-Werror) +-WARNFLAGS := $(WERROR) -Wall -Wextra -Wformat=2 $(WFORMATOVERFLOW) -W$(ERROR)implicit-int \ ++WARNFLAGS := $(WERROR) -Wextra -Wformat=2 $(WFORMATOVERFLOW) -W$(ERROR)implicit-int \ + -W$(ERROR)implicit-function-declaration -W$(ERROR)format-security \ +- $(WNOCLOBBERED) -W$(ERROR)cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) ++ $(WNOCLOBBERED) -W$(ERROR)cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) -Wstrict-prototypes + +-CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) $(D_URCU_VERSION) \ ++CPPFLAGS := $(CPPFLAGS) $(D_URCU_VERSION) \ + -D_FILE_OFFSET_BITS=64 \ + -DBIN_DIR=\"$(bindir)\" -DMULTIPATH_DIR=\"$(TGTDIR)$(plugindir)\" \ + -DRUNTIME_DIR=\"$(runtimedir)\" -DCONFIG_DIR=\"$(TGTDIR)$(configdir)\" \ +@@ -121,12 +133,11 @@ CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) $(D_URCU_VERSION) \ + -DABSTRACT_SOCKET=\"$(abstract_socket)\" -DPATHNAME_SOCKET=\"$(pathname_socket)\" \ + -DWSTRINGOP_TRUNCATION=$(if $(WSTRINGOP_TRUNCATION),1,0) \ + -MMD -MP +-CFLAGS := -std=$(C_STD) $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe \ +- -fexceptions ++CFLAGS := -std=$(C_STD) $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe + BIN_CFLAGS := -fPIE -DPIE + LIB_CFLAGS := -fPIC + SHARED_FLAGS := -shared +-LDFLAGS := $(LDFLAGS) -Wl,-z,relro -Wl,-z,now -Wl,-z,defs ++LDFLAGS := $(LDFLAGS) $(RPM_LD_FLAGS) -Wl,-z,relro -Wl,-z,now -Wl,-z,defs + BIN_LDFLAGS := -pie + + # Source code directories. Don't modify. diff --git a/0005-libmultipath-skip-extra-vector-work-in-remove_maps.patch b/0005-libmultipath-skip-extra-vector-work-in-remove_maps.patch deleted file mode 100644 index ee08327..0000000 --- a/0005-libmultipath-skip-extra-vector-work-in-remove_maps.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:14 -0600 -Subject: [PATCH] libmultipath: skip extra vector work in remove_maps - -Instead of repeatedly removing the first vector element, and shifting -the rest to fill in, call remove_map() without a vector, so it just -frees the devices. The vector will be completely cleaned up by -vector_free() immediately afterwards. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/structs_vec.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/libmultipath/structs_vec.c b/libmultipath/structs_vec.c -index 5a618767..f3fdc5a6 100644 ---- a/libmultipath/structs_vec.c -+++ b/libmultipath/structs_vec.c -@@ -392,10 +392,8 @@ remove_maps(struct vectors * vecs) - if (!vecs) - return; - -- vector_foreach_slot (vecs->mpvec, mpp, i) { -- remove_map(mpp, vecs->pathvec, vecs->mpvec); -- i--; -- } -+ vector_foreach_slot (vecs->mpvec, mpp, i) -+ remove_map(mpp, vecs->pathvec, NULL); - - vector_free(vecs->mpvec); - vecs->mpvec = NULL; diff --git a/0021-RH-add-mpathconf.patch b/0006-RH-add-mpathconf.patch similarity index 92% rename from 0021-RH-add-mpathconf.patch rename to 0006-RH-add-mpathconf.patch index e279822..46f1126 100644 --- a/0021-RH-add-mpathconf.patch +++ b/0006-RH-add-mpathconf.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 29e5c6d6e2177e73d1be2ed2af66c1007487bf60 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 16 Oct 2014 15:49:01 -0500 Subject: [PATCH] RH: add mpathconf @@ -10,21 +10,47 @@ command line. But, mostly it is used to get a multipath.conf file with the OS defaults, and to enable and disable multipathing via a single command. +Co-authored-by: Paul Donohue Signed-off-by: Benjamin Marzinski --- - libmultipath/config.c | 2 + - multipath/Makefile | 4 + - multipath/mpathconf | 658 ++++++++++++++++++++++++++++++++++++++++++ - multipath/mpathconf.8 | 151 ++++++++++ - 4 files changed, 815 insertions(+) + .github/actions/spelling/expect.txt | 3 + + libmultipath/config.c | 2 + + multipath/Makefile | 4 + + multipath/mpathconf | 658 ++++++++++++++++++++++++++++ + multipath/mpathconf.8 | 151 +++++++ + 5 files changed, 818 insertions(+) create mode 100644 multipath/mpathconf create mode 100644 multipath/mpathconf.8 +diff --git a/.github/actions/spelling/expect.txt b/.github/actions/spelling/expect.txt +index a5856bcc..5c9113ba 100644 +--- a/.github/actions/spelling/expect.txt ++++ b/.github/actions/spelling/expect.txt +@@ -131,9 +131,11 @@ Marzinski + misdetection + mpath + mpathb ++mpathconf + mpathpersist + mpathvalid + msecs ++multipathable + multipathc + multipathd + multipathed +@@ -154,6 +156,7 @@ ontap + OOM + opensvc + OPTFLAGS ++outfile + paramp + partx + pathgroup diff --git a/libmultipath/config.c b/libmultipath/config.c -index 183b319d..01f36a4f 100644 +index b8317f4d..0bbaa981 100644 --- a/libmultipath/config.c +++ b/libmultipath/config.c -@@ -968,6 +968,8 @@ int _init_config (const char *file, struct config *conf) +@@ -939,6 +939,8 @@ int init_config__ (const char *file, struct config *conf) validate_pctable(conf->overrides, 0, file); } else { condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); @@ -34,42 +60,43 @@ index 183b319d..01f36a4f 100644 conf->blist_devnode = vector_alloc(); if (!conf->blist_devnode) { diff --git a/multipath/Makefile b/multipath/Makefile -index b3c2cc81..413294ef 100644 +index 2ea9e528..3dc241cc 100644 --- a/multipath/Makefile +++ b/multipath/Makefile -@@ -22,6 +22,7 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so +@@ -24,6 +24,7 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so install: $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) - $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/62-multipath.rules -@@ -31,6 +32,7 @@ install: + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) +@@ -32,6 +33,7 @@ install: $(Q)$(INSTALL_PROGRAM) -m 644 tmpfiles.conf $(DESTDIR)$(tmpfilesdir)/multipath.conf $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man8 $(Q)$(INSTALL_PROGRAM) -m 644 $(EXEC).8 $(DESTDIR)$(mandir)/man8 + $(Q)$(INSTALL_PROGRAM) -m 644 mpathconf.8 $(DESTDIR)$(mandir)/man8 $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man5 $(Q)$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5 $(DESTDIR)$(mandir)/man5 - ifneq ($(SCSI_DH_MODULES_PRELOAD),) -@@ -41,11 +43,13 @@ endif + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(modulesloaddir) +@@ -46,12 +48,14 @@ endif uninstall: $(Q)$(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(Q)$(RM) $(DESTDIR)$(bindir)/mpathconf $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/scsi_dh.conf $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules $(Q)$(RM) $(DESTDIR)$(mandir)/man8/$(EXEC).8 + $(Q)$(RM) $(DESTDIR)$(mandir)/man8/mpathconf.8 $(Q)$(RM) $(DESTDIR)$(mandir)/man5/$(EXEC).conf.5 + $(Q)$(RM) $(DESTDIR)$(tmpfilesdir)/multipath.conf - clean: dep_clean diff --git a/multipath/mpathconf b/multipath/mpathconf new file mode 100644 -index 00000000..319664b1 +index 00000000..ce430075 --- /dev/null +++ b/multipath/mpathconf @@ -0,0 +1,658 @@ @@ -106,7 +133,7 @@ index 00000000..319664b1 + +defaults { + user_friendly_names yes -+ find_multipaths yes ++ find_multipaths on +}" + +CONFIGFILE="/etc/multipath.conf" @@ -124,7 +151,7 @@ index 00000000..319664b1 + echo "Disable: --disable" + echo "Only allow certain wwids (instead of enable): --allow " + echo "Set user_friendly_names (Default y): --user_friendly_names " -+ echo "Set find_multipaths (Default y): --find_multipaths " ++ echo "Set find_multipaths (Default on): --find_multipaths " + echo "Set default property blacklist (Default n): --property_blacklist " + echo "Set enable_foreign to show foreign devices (Default n): --enable_foreign " + echo "Set recheck_wwid (Defaut n): --recheck_wwid " @@ -328,11 +355,11 @@ index 00000000..319664b1 + exit 1 + fi + if [ "$FIND" = "y" ]; then -+ FIND="yes" ++ FIND="on" + elif [ "$FIND" = "n" ]; then -+ FIND="no" -+ elif [ -n "$FIND" ] && [ "$FIND" != "yes" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then -+ echo "--find_multipaths must be one of 'yes' 'no' 'strict' 'greedy' or 'smart'" ++ FIND="off" ++ elif [ -n "$FIND" ] && [ "$FIND" != "on" -a "$FIND" != "yes" -a "$FIND" != "off" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then ++ echo "--find_multipaths must be one of 'on' 'yes' 'y' 'off' 'no' 'n' 'strict' 'greedy' or 'smart'" + exit 1 + fi + if [ -n "$PROPERTY" ] && [ "$PROPERTY" != "y" -a "$PROPERTY" != "n" ]; then @@ -497,7 +524,7 @@ index 00000000..319664b1 + echo "multipath is disabled" + fi + if [ -z "$HAVE_FIND" ]; then -+ echo "find_multipaths is no" ++ echo "find_multipaths is off" + else + echo "find_multipaths is $HAVE_FIND" + fi @@ -733,7 +760,7 @@ index 00000000..319664b1 +fi diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8 new file mode 100644 -index 00000000..9c2fb835 +index 00000000..ec4e5c56 --- /dev/null +++ b/multipath/mpathconf.8 @@ -0,0 +1,151 @@ @@ -779,10 +806,10 @@ index 00000000..9c2fb835 +.B user_friendly_names +set and +.B find_multipaths -+set to \fByes\fP. To disable these, use the ++set to \fBon\fP. To disable these, use the +.B --user_friendly_names n +and -+.B --find_multipaths n ++.B --find_multipaths off +options +.SH COMMANDS +.TP @@ -825,7 +852,7 @@ index 00000000..9c2fb835 +sets an existing \fBrecheck_wwid\fP line to \fBno\fP. This command can be used +along with any other command. +.TP -+.B --find_multipaths\fP { \fByes\fP | \fBno\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP } ++.B --find_multipaths\fP { \fBon\fP | \fByes\fP | \fBy\fP | \fBoff\fP | \fBno\fP | \fBn\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP } +If set to \fB\fP, this adds the line +.B find_multipaths +to the @@ -875,7 +902,7 @@ index 00000000..9c2fb835 +.B service multipathd stop +to stop the multipathd daemon on \fB--disable\fP, and +.B service multipathd reload -+to reconfigure multipathd on \fB--user_frindly_names\fP and ++to reconfigure multipathd on \fB--user_friendly_names\fP and +\fB--find_multipaths\fP. +This option is set to \fBn\fP by default. +.SH FILES diff --git a/0006-libmultipath-orphan-paths-if-coalesce_paths-frees-ne.patch b/0006-libmultipath-orphan-paths-if-coalesce_paths-frees-ne.patch deleted file mode 100644 index f545df7..0000000 --- a/0006-libmultipath-orphan-paths-if-coalesce_paths-frees-ne.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 20 Dec 2022 17:41:15 -0600 -Subject: [PATCH] libmultipath: orphan paths if coalesce_paths frees newmp - -If coalesce_paths() is called without a mpvec, it will free all the -multipath devices on newmp at the end. This will clear pp->mpp from the -path, but it doesn't completely unitialize them. cli_add_map() can call -coalsce_paths() this way, when adding a device that doesn't currently -exist. cli_add_map() first creates the device in the kernel, and then -calls ev_add_map() to add it to multipathd. If something goes wrong in -ev_add_map(), the paths will still be initialized, even though they're -orphans. - -Fix this by calling remove_map() to orphan the paths that belong to -the multipath devices being deleted by coalesce_paths(). - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/configure.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/libmultipath/configure.c b/libmultipath/configure.c -index e551047a..e689f8a7 100644 ---- a/libmultipath/configure.c -+++ b/libmultipath/configure.c -@@ -1273,8 +1273,11 @@ int coalesce_paths (struct vectors *vecs, vector mpvec, char *refwwid, - ret = CP_OK; - out: - free(size_mismatch_seen); -- if (!mpvec) -- free_multipathvec(newmp, KEEP_PATHS); -+ if (!mpvec) { -+ vector_foreach_slot (newmp, mpp, i) -+ remove_map(mpp, vecs->pathvec, NULL); -+ vector_free(newmp); -+ } - return ret; - } - diff --git a/0022-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch b/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch similarity index 75% rename from 0022-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch rename to 0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch index c98543b..cef8b56 100644 --- a/0022-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch +++ b/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From d6ad888bad3850bb0a342ebcdc9fd78773eb3b2a Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 17 Oct 2014 11:20:34 -0500 Subject: [PATCH] RH: add wwids from kernel cmdline mpath.wwids with -A @@ -14,16 +14,16 @@ multipathd.service Signed-off-by: Benjamin Marzinski --- - multipath/main.c | 54 +++++++++++++++++++++++++++++++++-- - multipath/multipath.8 | 7 ++++- - multipathd/multipathd.service | 1 + + multipath/main.c | 54 ++++++++++++++++++++++++++++++-- + multipath/multipath.8.in | 7 ++++- + multipathd/multipathd.service.in | 1 + 3 files changed, 59 insertions(+), 3 deletions(-) diff --git a/multipath/main.c b/multipath/main.c -index b9f360b4..5eb752ee 100644 +index 31012874..a667c2ee 100644 --- a/multipath/main.c +++ b/multipath/main.c -@@ -120,7 +120,7 @@ usage (char * progname) +@@ -111,7 +111,7 @@ usage (char * progname) fprintf (stderr, " %s [-v level] [-R retries] -F\n", progname); fprintf (stderr, " %s [-v level] [-l|-ll] [device]\n", progname); fprintf (stderr, " %s [-v level] [-a|-w] device\n", progname); @@ -32,7 +32,7 @@ index b9f360b4..5eb752ee 100644 fprintf (stderr, " %s [-v level] [-i] [-c|-C] device\n", progname); fprintf (stderr, " %s [-v level] [-i] [-u|-U]\n", progname); fprintf (stderr, " %s [-h|-t|-T]\n", progname); -@@ -134,6 +134,8 @@ usage (char * progname) +@@ -125,6 +125,8 @@ usage (char * progname) " -f flush a multipath device map\n" " -F flush all multipath device maps\n" " -a add a device wwid to the wwids file\n" @@ -41,7 +41,7 @@ index b9f360b4..5eb752ee 100644 " -c check if a device should be a path in a multipath device\n" " -C check if a multipath device has usable paths\n" " -q allow queue_if_no_path when multipathd is not running\n" -@@ -447,6 +449,50 @@ static void cleanup_vecs(void) +@@ -440,6 +442,50 @@ static void cleanup_vecs(void) free_pathvec(vecs.pathvec, FREE_PATHS); } @@ -92,16 +92,16 @@ index b9f360b4..5eb752ee 100644 static int configure (struct config *conf, enum mpath_cmds cmd, enum devtypes dev_type, char *devpath) -@@ -840,7 +886,7 @@ main (int argc, char *argv[]) - conf->force_sync = 1; - if (atexit(cleanup_vecs)) +@@ -851,7 +897,7 @@ main (int argc, char *argv[]) condlog(1, "failed to register cleanup handler for vecs: %m"); + if (atexit(cleanup_bindings)) + condlog(1, "failed to register cleanup handler for bindings: %m"); - while ((arg = getopt(argc, argv, ":adDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { + while ((arg = getopt(argc, argv, ":aAdDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { switch(arg) { case 'v': if (!isdigit(optarg[0])) { -@@ -911,6 +957,10 @@ main (int argc, char *argv[]) +@@ -922,6 +968,10 @@ main (int argc, char *argv[]) case 'T': cmd = CMD_DUMP_CONFIG; break; @@ -112,11 +112,11 @@ index b9f360b4..5eb752ee 100644 case 'h': usage(argv[0]); exit(RTVL_OK); -diff --git a/multipath/multipath.8 b/multipath/multipath.8 -index 88149d53..072a03ee 100644 ---- a/multipath/multipath.8 -+++ b/multipath/multipath.8 -@@ -63,7 +63,7 @@ multipath \- Device mapper target autoconfig. +diff --git a/multipath/multipath.8.in b/multipath/multipath.8.in +index b88e9a4c..edd742aa 100644 +--- a/multipath/multipath.8.in ++++ b/multipath/multipath.8.in +@@ -64,7 +64,7 @@ multipath \- Device mapper target autoconfig. .B multipath .RB [\| \-v\ \c .IR level \|] @@ -125,7 +125,7 @@ index 88149d53..072a03ee 100644 . .LP .B multipath -@@ -145,6 +145,11 @@ device mapper, path checkers ...). +@@ -146,6 +146,11 @@ device mapper, path checkers ...). Add the WWID for the specified device to the WWIDs file. . .TP @@ -137,15 +137,15 @@ index 88149d53..072a03ee 100644 .B \-w Remove the WWID for the specified device from the WWIDs file. . -diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service -index d76f94f9..bb5f383a 100644 ---- a/multipathd/multipathd.service -+++ b/multipathd/multipathd.service -@@ -17,6 +17,7 @@ ConditionVirtualization=!container +diff --git a/multipathd/multipathd.service.in b/multipathd/multipathd.service.in +index ab166435..1ec08c6e 100644 +--- a/multipathd/multipathd.service.in ++++ b/multipathd/multipathd.service.in +@@ -19,6 +19,7 @@ StartLimitBurst=3 [Service] Type=notify NotifyAccess=main -+ExecStartPre=-/sbin/multipath -A - ExecStart=/sbin/multipathd -d -s - ExecReload=/sbin/multipathd reconfigure - TasksMax=infinity ++ExecStartPre=-@BINDIR@/multipath -A + ExecStart=@BINDIR@/multipathd -d -s + ExecReload=@BINDIR@/multipathd reconfigure + Restart=on-failure diff --git a/0007-libmultipath-is_path_valid-check-if-device-is-in-use.patch b/0007-libmultipath-is_path_valid-check-if-device-is-in-use.patch deleted file mode 100644 index 6ffa6fc..0000000 --- a/0007-libmultipath-is_path_valid-check-if-device-is-in-use.patch +++ /dev/null @@ -1,609 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Martin Wilck -Date: Wed, 9 Nov 2022 21:20:58 +0100 -Subject: [PATCH] libmultipath: is_path_valid(): check if device is in use - -To check whether we will be able to add a given device can be part -of a multipath map, we have two tests in check_path_valid(): -released_to_systemd() and the O_EXCL test. The former isn't helpful -if "multipath -u" is called for the first time for a given device, -and the latter is only used in the "find_multipaths smart" case, because -actively opening the device with O_EXCL, even for a very short time, is prone -to races with other processes. - -It turns out that this may cause issues in some scenarios. We saw problems in -once case where "find_multipaths greedy" was used with a single -non-multipahted root disk and a very large number of multipath LUNs. -The root disk would first be classified as multipath device. multipathd -would try to create a map, fail (because the disk was mounted) and -trigger another uevent. But because of the very large number of multipath -devices, this event was queued up behind thousands of other events, and -the root device timed out eventually. - -While a simple workaround for the given problem would be proper blacklisting -or using a different find_multipaths mode, I am proposing a different -solution here. An additional test is added in is_path_valid() which -checks whether the given device is currently in use by 1. sysfs holders, -2. mounts (from /proc/self/mountinfo) or 3. swaps (from /proc/swaps). 2. -and 3. are similar to systemd's device detection after switching root. -This must not only be done for the device itself, but also for all its -partitions. For mountinfo and swaps, libmount is utilized. - -With this patch, "multipath -u" will make devices with mounted or otherwise -used partitions available to systemd early, without waiting for multipathd -to fail setting up the map and re-triggering an uevent. This should avoid -the issue described above even without blacklisting. The downside of it -is a longer runtime of "multipath -u" for almost all devices, in particular -for real multipath devices. The runtime required for the new checks was in the -order of 0.1ms-1ms in my tests. Moreover, there is a certain risk that devices may -wrongly classified as non-multipath because of transient mounts or holders -created by other processes. - -To make this code compile on older distributions, we need some additional -checks in create-config.mk. - -Signed-off-by: Martin Wilck -Reviewed-by: Benjamin Marzinski -Signed-off-by: Benjamin Marzinski ---- - .github/workflows/build-and-unittest.yaml | 2 +- - create-config.mk | 11 +- - libmpathutil/libmpathutil.version | 6 + - libmpathutil/util.c | 12 + - libmpathutil/util.h | 2 + - libmultipath/Makefile | 2 +- - libmultipath/alias.c | 11 - - libmultipath/valid.c | 270 ++++++++++++++++++++++ - tests/Makefile | 2 +- - tests/valid.c | 48 ++++ - 10 files changed, 351 insertions(+), 15 deletions(-) - -diff --git a/.github/workflows/build-and-unittest.yaml b/.github/workflows/build-and-unittest.yaml -index abf17bf0..9e6c0e89 100644 ---- a/.github/workflows/build-and-unittest.yaml -+++ b/.github/workflows/build-and-unittest.yaml -@@ -31,7 +31,7 @@ jobs: - sudo apt-get install --yes gcc - make perl-base pkg-config valgrind - libdevmapper-dev libreadline-dev libaio-dev libsystemd-dev -- libudev-dev libjson-c-dev liburcu-dev libcmocka-dev libedit-dev -+ libudev-dev libjson-c-dev liburcu-dev libcmocka-dev libedit-dev libmount-dev - - name: build - run: make -Orecurse -j$(grep -c ^processor /proc/cpuinfo) READLINE=${{ matrix.rl }} - - name: test -diff --git a/create-config.mk b/create-config.mk -index 2a95ec56..f128375f 100644 ---- a/create-config.mk -+++ b/create-config.mk -@@ -23,7 +23,7 @@ check_cmd = $(shell \ - - # Check whether a function with name $1 has been declared in header file $2. - check_func = $(shell \ -- if grep -Eq "^[^[:blank:]]+[[:blank:]]+$1[[:blank:]]*(.*)*" "$2"; then \ -+ if grep -Eq "^(extern[[:blank:]]+)?[^[:blank:]]+[[:blank:]]+$1[[:blank:]]*(.*)*" "$2"; then \ - found=1; \ - status="yes"; \ - else \ -@@ -104,6 +104,15 @@ ifneq ($(call check_var,ELS_DTAG_LNK_INTEGRITY,$(kernel_incdir)/scsi/fc/fc_els.h - FPIN_SUPPORT = 1 - endif - -+libmount_h := $(shell $(PKGCONFIG) --variable=includedir mount)/libmount/libmount.h -+ifneq ($(call check_func,mnt_unref_cache,$(libmount_h)),0) -+ DEFINES += LIBMOUNT_HAS_MNT_UNREF_CACHE -+endif -+ -+ifneq ($(call check_func,mnt_table_parse_swaps,$(libmount_h)),0) -+ DEFINES += LIBMOUNT_SUPPORTS_SWAP -+endif -+ - ifneq ($(call check_file,$(kernel_incdir)/linux/nvme_ioctl.h),0) - ANA_SUPPORT := 1 - endif -diff --git a/libmpathutil/libmpathutil.version b/libmpathutil/libmpathutil.version -index 1238fc93..dd007be4 100644 ---- a/libmpathutil/libmpathutil.version -+++ b/libmpathutil/libmpathutil.version -@@ -133,3 +133,9 @@ LIBMPATHUTIL_1.1 { - global: - cleanup_fd_ptr; - } LIBMPATHUTIL_1.0; -+ -+LIBMPATHUTIL_1.2 { -+global: -+ cleanup_vector_free; -+ cleanup_fclose; -+} LIBMPATHUTIL_1.0; -diff --git a/libmpathutil/util.c b/libmpathutil/util.c -index 9662e1ed..92f25a50 100644 ---- a/libmpathutil/util.c -+++ b/libmpathutil/util.c -@@ -386,6 +386,18 @@ void cleanup_mutex(void *arg) - pthread_mutex_unlock(arg); - } - -+void cleanup_vector_free(void *arg) -+{ -+ if (arg) -+ vector_free((vector)arg); -+} -+ -+void cleanup_fclose(void *p) -+{ -+ if (p) -+ fclose(p); -+} -+ - struct bitfield *alloc_bitfield(unsigned int maxbit) - { - unsigned int n; -diff --git a/libmpathutil/util.h b/libmpathutil/util.h -index 75e20fd8..99a471d0 100644 ---- a/libmpathutil/util.h -+++ b/libmpathutil/util.h -@@ -48,6 +48,8 @@ int should_exit(void); - void cleanup_fd_ptr(void *arg); - void cleanup_free_ptr(void *arg); - void cleanup_mutex(void *arg); -+void cleanup_vector_free(void *arg); -+void cleanup_fclose(void *p); - - struct scandir_result { - struct dirent **di; -diff --git a/libmultipath/Makefile b/libmultipath/Makefile -index 3df851e2..61aa611f 100644 ---- a/libmultipath/Makefile -+++ b/libmultipath/Makefile -@@ -7,7 +7,7 @@ DEVLIB := libmultipath.so - CPPFLAGS += -I$(mpathutildir) -I$(mpathcmddir) -I$(nvmedir) -D_GNU_SOURCE $(SYSTEMD_CPPFLAGS) - CFLAGS += $(LIB_CFLAGS) - LIBDEPS += -lpthread -ldl -ldevmapper -ludev -L$(mpathutildir) -lmpathutil -L$(mpathcmddir) -lmpathcmd \ -- -lurcu -laio $(SYSTEMD_LIBDEPS) -+ -lmount -lurcu -laio $(SYSTEMD_LIBDEPS) - - # object files referencing MULTIPATH_DIR or CONFIG_DIR - # they need to be recompiled for unit tests -diff --git a/libmultipath/alias.c b/libmultipath/alias.c -index 05201224..c0139a2e 100644 ---- a/libmultipath/alias.c -+++ b/libmultipath/alias.c -@@ -667,11 +667,6 @@ static int _check_bindings_file(const struct config *conf, FILE *file, - return rc; - } - --static void cleanup_fclose(void *p) --{ -- fclose(p); --} -- - static int alias_compar(const void *p1, const void *p2) - { - const char *alias1 = (*(struct mpentry * const *)p1)->alias; -@@ -684,12 +679,6 @@ static int alias_compar(const void *p1, const void *p2) - return alias1 ? -1 : alias2 ? 1 : 0; - } - --static void cleanup_vector_free(void *arg) --{ -- if (arg) -- vector_free((vector)arg); --} -- - /* - * check_alias_settings(): test for inconsistent alias configuration - * -diff --git a/libmultipath/valid.c b/libmultipath/valid.c -index a6aa9215..d4dae3ed 100644 ---- a/libmultipath/valid.c -+++ b/libmultipath/valid.c -@@ -17,6 +17,8 @@ - #include - #include - #include -+#include -+#include - - #include "vector.h" - #include "config.h" -@@ -30,12 +32,271 @@ - #include "mpath_cmd.h" - #include "valid.h" - -+static int subdir_filter(const struct dirent *ent) -+{ -+ unsigned int j; -+ static char const *const skip[] = { -+ ".", -+ "..", -+ "holders", -+ "integrity", -+ "mq", -+ "power", -+ "queue", -+ "slaves", -+ "trace", -+ }; -+ -+ if (ent->d_type != DT_DIR) -+ return 0; -+ -+ for (j = 0; j < ARRAY_SIZE(skip); j++) -+ if (!strcmp(skip[j], ent->d_name)) -+ return 0; -+ return 1; -+} -+ -+static int read_partitions(const char *syspath, vector parts) -+{ -+ struct scandir_result sr = { .n = 0 }; -+ char path[PATH_MAX], *last; -+ char *prop; -+ int i; -+ -+ strlcpy(path, syspath, sizeof(path)); -+ sr.n = scandir(path, &sr.di, subdir_filter, NULL); -+ if (sr.n == -1) -+ return -errno; -+ -+ pthread_cleanup_push_cast(free_scandir_result, &sr); -+ -+ /* parts[0] is the whole disk */ -+ if ((prop = strdup(strrchr(path, '/') + 1)) != NULL) { -+ if (vector_alloc_slot(parts)) -+ vector_set_slot(parts, prop); -+ else -+ free(prop); -+ } -+ -+ last = path + strlen(path); -+ for (i = 0; i < sr.n; i++) { -+ struct stat st; -+ -+ /* only add dirs that have the "partition" attribute */ -+ snprintf(last, sizeof(path) - (last - path), "/%s/partition", -+ sr.di[i]->d_name); -+ -+ if (stat(path, &st) == 0 && -+ (prop = strdup(sr.di[i]->d_name)) != NULL) { -+ if (vector_alloc_slot(parts)) -+ vector_set_slot(parts, prop); -+ else -+ free(prop); -+ } -+ } -+ -+ pthread_cleanup_pop(1); -+ return 0; -+} -+ -+static int no_dots(const struct dirent *ent) -+{ -+ const char *name = ent->d_name; -+ -+ if (name[0] == '.' && -+ (name[1] == '\0' || (name[1] == '.' && name[2] == '\0'))) -+ return 0; -+ return 1; -+} -+ -+static int check_holders(const char *syspath) -+{ -+ struct scandir_result __attribute__((cleanup(free_scandir_result))) -+ sr = { .n = 0 }; -+ -+ sr.n = scandir(syspath, &sr.di, no_dots, NULL); -+ if (sr.n > 0) -+ condlog(4, "%s: found holders under %s", __func__, syspath); -+ return sr.n; -+} -+ -+static int check_all_holders(const struct _vector *parts) -+{ -+ char syspath[PATH_MAX]; -+ const char *sysname; -+ unsigned int j; -+ -+ if (VECTOR_SIZE(parts) == 0) -+ return 0; -+ -+ if (safe_sprintf(syspath, "/sys/class/block/%s/holders", -+ (const char *)VECTOR_SLOT(parts, 0))) -+ return -EOVERFLOW; -+ -+ if (check_holders(syspath) > 0) -+ return 1; -+ -+ j = 1; -+ vector_foreach_slot_after(parts, sysname, j) { -+ if (safe_sprintf(syspath, "/sys/class/block/%s/%s/holders", -+ (const char *)VECTOR_SLOT(parts, 0), sysname)) -+ return -EOVERFLOW; -+ if (check_holders(syspath) > 0) -+ return 1; -+ } -+ return 0; -+} -+ -+static void cleanup_table(void *arg) -+{ -+ if (arg) -+ mnt_free_table((struct libmnt_table *)arg); -+} -+ -+static void cleanup_cache(void *arg) -+{ -+ if (arg) -+#ifdef LIBMOUNT_HAS_MNT_UNREF_CACHE -+ mnt_unref_cache((struct libmnt_cache *)arg); -+#else -+ mnt_free_cache((struct libmnt_cache *)arg); -+#endif -+} -+ -+/* -+ * Passed a vector of partitions and a libmount table, -+ * check if any of the partitions in the vector is referenced in the table. -+ * Note that mnt_table_find_srcpath() also resolves mounts by symlinks. -+ */ -+static int check_mnt_table(const struct _vector *parts, -+ struct libmnt_table *tbl, -+ const char *table_name) -+{ -+ unsigned int i; -+ const char *sysname; -+ char devpath[PATH_MAX]; -+ -+ vector_foreach_slot(parts, sysname, i) { -+ if (!safe_sprintf(devpath, "/dev/%s", sysname) && -+ mnt_table_find_srcpath(tbl, devpath, -+ MNT_ITER_FORWARD) != NULL) { -+ condlog(4, "%s: found %s in %s", __func__, -+ sysname, table_name); -+ return 1; -+ } -+ } -+ return 0; -+} -+ -+static int check_mountinfo(const struct _vector *parts) -+{ -+ static const char mountinfo[] = "/proc/self/mountinfo"; -+ struct libmnt_table *tbl; -+ struct libmnt_cache *cache; -+ FILE *stream; -+ int used = 0, ret; -+ -+ tbl = mnt_new_table(); -+ if (!tbl ) -+ return -errno; -+ -+ pthread_cleanup_push(cleanup_table, tbl); -+ cache = mnt_new_cache(); -+ if (cache) { -+ pthread_cleanup_push(cleanup_cache, cache); -+ if (mnt_table_set_cache(tbl, cache) == 0) { -+ stream = fopen(mountinfo, "r"); -+ if (stream != NULL) { -+ pthread_cleanup_push(cleanup_fclose, stream); -+ ret = mnt_table_parse_stream(tbl, stream, mountinfo); -+ pthread_cleanup_pop(1); -+ -+ if (ret == 0) -+ used = check_mnt_table(parts, tbl, -+ "mountinfo"); -+ } -+ } -+ pthread_cleanup_pop(1); -+ } -+ pthread_cleanup_pop(1); -+ return used; -+} -+ -+#ifdef LIBMOUNT_SUPPORTS_SWAP -+static int check_swaps(const struct _vector *parts) -+{ -+ struct libmnt_table *tbl; -+ struct libmnt_cache *cache; -+ int used = 0, ret; -+ -+ tbl = mnt_new_table(); -+ if (!tbl ) -+ return -errno; -+ -+ pthread_cleanup_push(cleanup_table, tbl); -+ cache = mnt_new_cache(); -+ if (cache) { -+ pthread_cleanup_push(cleanup_cache, cache); -+ if (mnt_table_set_cache(tbl, cache) == 0) { -+ ret = mnt_table_parse_swaps(tbl, NULL); -+ if (ret == 0) -+ used = check_mnt_table(parts, tbl, "swaps"); -+ } -+ pthread_cleanup_pop(1); -+ } -+ pthread_cleanup_pop(1); -+ return used; -+} -+#else -+static int check_swaps(const struct _vector *parts __attribute__((unused))) -+{ -+ return 0; -+} -+#endif -+ -+ -+/* -+ * Given a block device, check if the device itself or any of its -+ * partitions is in use -+ * - by sysfs holders (e.g. LVM) -+ * - mounted according to /proc/self/mountinfo -+ * - used as swap -+ */ -+static int is_device_in_use(struct udev_device *udevice) -+{ -+ const char *syspath; -+ vector parts; -+ int used = 0, ret; -+ -+ syspath = udev_device_get_syspath(udevice); -+ if (!syspath) -+ return -ENOMEM; -+ -+ parts = vector_alloc(); -+ if (!parts) -+ return -ENOMEM; -+ -+ pthread_cleanup_push_cast(free_strvec, parts); -+ if ((ret = read_partitions(syspath, parts)) == 0) -+ used = check_all_holders(parts) > 0 || -+ check_mountinfo(parts) > 0 || -+ check_swaps(parts) > 0; -+ pthread_cleanup_pop(1); -+ -+ if (ret < 0) -+ return ret; -+ -+ condlog(3, "%s: %s is %sin use", __func__, syspath, used ? "" : "not "); -+ return used; -+} -+ - int - is_path_valid(const char *name, struct config *conf, struct path *pp, - bool check_multipathd) - { - int r; - int fd; -+ const char *prop; - - if (!pp || !name || !conf) - return PATH_IS_ERROR; -@@ -80,6 +341,10 @@ is_path_valid(const char *name, struct config *conf, struct path *pp, - if (!pp->udev) - return PATH_IS_ERROR; - -+ prop = udev_device_get_property_value(pp->udev, "DEVTYPE"); -+ if (prop == NULL || strcmp(prop, "disk")) -+ return PATH_IS_NOT_VALID; -+ - r = pathinfo(pp, conf, DI_SYSFS | DI_WWID | DI_BLACKLIST); - if (r == PATHINFO_SKIPPED) - return PATH_IS_NOT_VALID; -@@ -96,6 +361,11 @@ is_path_valid(const char *name, struct config *conf, struct path *pp, - return PATH_IS_ERROR; - } - -+ if ((conf->find_multipaths == FIND_MULTIPATHS_GREEDY || -+ conf->find_multipaths == FIND_MULTIPATHS_SMART) && -+ is_device_in_use(pp->udev) > 0) -+ return PATH_IS_NOT_VALID; -+ - if (conf->find_multipaths == FIND_MULTIPATHS_GREEDY) - return PATH_IS_VALID; - -diff --git a/tests/Makefile b/tests/Makefile -index 860338b2..1648ab9d 100644 ---- a/tests/Makefile -+++ b/tests/Makefile -@@ -55,7 +55,7 @@ vpd-test_LIBDEPS := -ludev -lpthread -ldl - alias-test_TESTDEPS := test-log.o - alias-test_LIBDEPS := -lpthread -ldl - valid-test_OBJDEPS := $(multipathdir)/valid.o $(multipathdir)/discovery.o --valid-test_LIBDEPS := -ludev -lpthread -ldl -+valid-test_LIBDEPS := -lmount -ludev -lpthread -ldl - devt-test_LIBDEPS := -ludev - mpathvalid-test_LIBDEPS := -ludev -lpthread -ldl - mpathvalid-test_OBJDEPS := $(mpathvaliddir)/mpath_valid.o -diff --git a/tests/valid.c b/tests/valid.c -index 398b771e..70329324 100644 ---- a/tests/valid.c -+++ b/tests/valid.c -@@ -83,6 +83,13 @@ struct udev_device *__wrap_udev_device_new_from_subsystem_sysname(struct udev *u - return NULL; - } - -+/* For devtype check */ -+const char *__wrap_udev_device_get_property_value(struct udev_device *udev_device, const char *property) -+{ -+ check_expected(property); -+ return mock_ptr_type(char *); -+} -+ - /* For the "hidden" check in pathinfo() */ - const char *__wrap_udev_device_get_sysattr_value(struct udev_device *udev_device, - const char *sysattr) -@@ -97,6 +104,12 @@ int __wrap_add_foreign(struct udev_device *udev_device) - return mock_type(int); - } - -+/* For is_device_used() */ -+const char *__wrap_udev_device_get_sysname(struct udev_device *udev_device) -+{ -+ return mock_ptr_type(char *); -+} -+ - /* called from pathinfo() */ - int __wrap_filter_devnode(struct config *conf, const struct _vector *elist, - const char *vendor, const char * product, const char *dev) -@@ -165,6 +178,11 @@ int __wrap_is_failed_wwid(const char *wwid) - return ret; - } - -+const char *__wrap_udev_device_get_syspath(struct udev_device *udevice) -+{ -+ return mock_ptr_type(char *); -+} -+ - int __wrap_check_wwids_file(char *wwid, int write_wwid) - { - bool passed = mock_type(bool); -@@ -225,6 +243,8 @@ static void setup_passing(char *name, char *wwid, unsigned int check_multipathd, - will_return(__wrap_udev_device_new_from_subsystem_sysname, true); - will_return(__wrap_udev_device_new_from_subsystem_sysname, - name); -+ expect_string(__wrap_udev_device_get_property_value, property, "DEVTYPE"); -+ will_return(__wrap_udev_device_get_property_value, "disk"); - if (stage == STAGE_GET_UDEV_DEVICE) - return; - if (stage == STAGE_PATHINFO_REAL) { -@@ -250,6 +270,10 @@ static void setup_passing(char *name, char *wwid, unsigned int check_multipathd, - return; - will_return(__wrap_is_failed_wwid, WWID_IS_NOT_FAILED); - will_return(__wrap_is_failed_wwid, wwid); -+ /* avoid real is_device_in_use() check */ -+ if (conf.find_multipaths == FIND_MULTIPATHS_GREEDY || -+ conf.find_multipaths == FIND_MULTIPATHS_SMART) -+ will_return(__wrap_udev_device_get_syspath, NULL); - if (stage == STAGE_IS_FAILED) - return; - will_return(__wrap_check_wwids_file, false); -@@ -347,6 +371,30 @@ static void test_check_multipathd(void **state) - assert_int_equal(is_path_valid(name, &conf, &pp, true), - PATH_IS_ERROR); - assert_string_equal(pp.dev, name); -+ -+ /* test pass because connect succeeded. succeed getting udev. Wrong DEVTYPE */ -+ memset(&pp, 0, sizeof(pp)); -+ setup_passing(name, NULL, CHECK_MPATHD_RUNNING, STAGE_CHECK_MULTIPATHD); -+ will_return(__wrap_udev_device_new_from_subsystem_sysname, true); -+ will_return(__wrap_udev_device_new_from_subsystem_sysname, -+ name); -+ expect_string(__wrap_udev_device_get_property_value, property, "DEVTYPE"); -+ will_return(__wrap_udev_device_get_property_value, "partition"); -+ assert_int_equal(is_path_valid(name, &conf, &pp, true), -+ PATH_IS_NOT_VALID); -+ assert_string_equal(pp.dev, name); -+ -+ /* test pass because connect succeeded. succeed getting udev. Bad DEVTYPE */ -+ memset(&pp, 0, sizeof(pp)); -+ setup_passing(name, NULL, CHECK_MPATHD_RUNNING, STAGE_CHECK_MULTIPATHD); -+ will_return(__wrap_udev_device_new_from_subsystem_sysname, true); -+ will_return(__wrap_udev_device_new_from_subsystem_sysname, -+ name); -+ expect_string(__wrap_udev_device_get_property_value, property, "DEVTYPE"); -+ will_return(__wrap_udev_device_get_property_value, NULL); -+ assert_int_equal(is_path_valid(name, &conf, &pp, true), -+ PATH_IS_NOT_VALID); -+ assert_string_equal(pp.dev, name); - } - - static void test_pathinfo(void **state) diff --git a/0023-RH-reset-default-find_mutipaths-value-to-off.patch b/0008-RH-reset-default-find_mutipaths-value-to-off.patch similarity index 52% rename from 0023-RH-reset-default-find_mutipaths-value-to-off.patch rename to 0008-RH-reset-default-find_mutipaths-value-to-off.patch index ea12464..fdc90d4 100644 --- a/0023-RH-reset-default-find_mutipaths-value-to-off.patch +++ b/0008-RH-reset-default-find_mutipaths-value-to-off.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 064d761121e7e2c7b63ab280e341d8010a413119 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 7 Jun 2018 17:43:52 -0500 Subject: [PATCH] RH: reset default find_mutipaths value to off @@ -6,16 +6,18 @@ Subject: [PATCH] RH: reset default find_mutipaths value to off Upstream has changed to default find_multipaths to "strict". For now Redhat will retain the previous default of "off". +Co-authored-by: Paul Donohue Signed-off-by: Benjamin Marzinski --- - libmultipath/defaults.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) + libmultipath/defaults.h | 2 +- + multipath/multipath.conf.5.in | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h -index a5e9ea0c..514fd880 100644 +index 134b690a..e2fe7ac4 100644 --- a/libmultipath/defaults.h +++ b/libmultipath/defaults.h -@@ -23,7 +23,7 @@ +@@ -24,7 +24,7 @@ #define DEFAULT_NO_PATH_RETRY NO_PATH_RETRY_UNDEF #define DEFAULT_VERBOSITY 2 #define DEFAULT_REASSIGN_MAPS 0 @@ -24,3 +26,16 @@ index a5e9ea0c..514fd880 100644 #define DEFAULT_FAST_IO_FAIL 5 #define DEFAULT_DEV_LOSS_TMO 600 #define DEFAULT_RETAIN_HWHANDLER RETAIN_HWHANDLER_ON +diff --git a/multipath/multipath.conf.5.in b/multipath/multipath.conf.5.in +index ba291e11..b8389db3 100644 +--- a/multipath/multipath.conf.5.in ++++ b/multipath/multipath.conf.5.in +@@ -1227,7 +1227,7 @@ as non-multipath and passed on to upper layers. + \fBNote:\fR this may cause delays during device detection if + there are single-path devices which aren\'t blacklisted. + .TP +-The default is: \fBstrict\fR ++The default is: \fBoff\fR + .RE + . + . diff --git a/0008-libmpathpersist-use-conf-timeout-for-updating-persis.patch b/0008-libmpathpersist-use-conf-timeout-for-updating-persis.patch deleted file mode 100644 index 9f3dcb2..0000000 --- a/0008-libmpathpersist-use-conf-timeout-for-updating-persis.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Martin Wilck -Date: Mon, 2 Jan 2023 12:39:36 +0100 -Subject: [PATCH] libmpathpersist: use conf->timeout for updating persistent - reservations - -On systems with many LUNs, multipathd may fail to respond within the -default timeout to a "setprkey" command because the vecs lock is held -by the path checker. Honor the globally configured uxsock timeout in -libmpathpersist. - -Reported-by: boposki (github.com/opensvc/multipath-tools/pull/58) -Signed-off-by: Martin Wilck -Reviewed-by: Benjamin Marzinski -Signed-off-by: Benjamin Marzinski ---- - libmpathpersist/mpath_updatepr.c | 11 ++++++++++- - 1 file changed, 10 insertions(+), 1 deletion(-) - -diff --git a/libmpathpersist/mpath_updatepr.c b/libmpathpersist/mpath_updatepr.c -index 4529a82b..36bd777e 100644 ---- a/libmpathpersist/mpath_updatepr.c -+++ b/libmpathpersist/mpath_updatepr.c -@@ -14,6 +14,9 @@ - #include - #include "debug.h" - #include "mpath_cmd.h" -+#include "vector.h" -+#include "globals.h" -+#include "config.h" - #include "uxsock.h" - #include "mpathpr.h" - -@@ -24,6 +27,12 @@ static int do_update_pr(char *alias, char *cmd, char *key) - char str[256]; - char *reply; - int ret = 0; -+ int timeout; -+ struct config *conf; -+ -+ conf = get_multipath_config(); -+ timeout = conf->uxsock_timeout; -+ put_multipath_config(conf); - - fd = mpath_connect(); - if (fd == -1) { -@@ -41,7 +50,7 @@ static int do_update_pr(char *alias, char *cmd, char *key) - mpath_disconnect(fd); - return -1; - } -- ret = recv_packet(fd, &reply, DEFAULT_REPLY_TIMEOUT); -+ ret = recv_packet(fd, &reply, timeout); - if (ret < 0) { - condlog(2, "%s: message=%s recv error=%d", alias, str, errno); - ret = -1; diff --git a/0024-RH-attempt-to-get-ANA-info-via-sysfs-first.patch b/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch similarity index 86% rename from 0024-RH-attempt-to-get-ANA-info-via-sysfs-first.patch rename to 0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch index 06233ff..8065e9f 100644 --- a/0024-RH-attempt-to-get-ANA-info-via-sysfs-first.patch +++ b/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 335b8eb2773b07a602e84e14c1f3e289a9b25b5a Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 11 Apr 2019 13:25:42 -0500 Subject: [PATCH] RH: attempt to get ANA info via sysfs first @@ -13,10 +13,10 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/libmultipath/prioritizers/ana.c b/libmultipath/prioritizers/ana.c -index b5c7873d..e139360c 100644 +index 34527b22..4eaa3cc3 100644 --- a/libmultipath/prioritizers/ana.c +++ b/libmultipath/prioritizers/ana.c -@@ -24,6 +24,7 @@ +@@ -23,6 +23,7 @@ #include "prio.h" #include "util.h" #include "structs.h" @@ -24,7 +24,7 @@ index b5c7873d..e139360c 100644 enum { ANA_ERR_GETCTRL_FAILED = 1, -@@ -36,6 +37,7 @@ enum { +@@ -35,6 +36,7 @@ enum { ANA_ERR_GETNS_FAILED, ANA_ERR_NO_MEMORY, ANA_ERR_NO_INFORMATION, @@ -32,7 +32,7 @@ index b5c7873d..e139360c 100644 }; static const char *ana_errmsg[] = { -@@ -49,6 +51,7 @@ static const char *ana_errmsg[] = { +@@ -48,6 +50,7 @@ static const char *ana_errmsg[] = { [ANA_ERR_GETNS_FAILED] = "couldn't get namespace info", [ANA_ERR_NO_MEMORY] = "out of memory", [ANA_ERR_NO_INFORMATION] = "invalid fd", @@ -40,7 +40,7 @@ index b5c7873d..e139360c 100644 }; static const char *anas_string[] = { -@@ -107,6 +110,27 @@ static int get_ana_state(__u32 nsid, __u32 anagrpid, void *ana_log, +@@ -106,6 +109,27 @@ static int get_ana_state(__u32 nsid, __u32 anagrpid, void *ana_log, return -ANA_ERR_GETANAS_NOTFOUND; } @@ -68,7 +68,7 @@ index b5c7873d..e139360c 100644 static int get_ana_info(struct path * pp) { int rc; -@@ -210,8 +234,11 @@ int getprio(struct path *pp, __attribute__((unused)) char *args, +@@ -208,8 +232,11 @@ int getprio(struct path *pp, __attribute__((unused)) char *args) if (pp->fd < 0) rc = -ANA_ERR_NO_INFORMATION; diff --git a/0009-libmultipath-pathinfo-don-t-fail-for-devices-lacking.patch b/0009-libmultipath-pathinfo-don-t-fail-for-devices-lacking.patch deleted file mode 100644 index fe7f001..0000000 --- a/0009-libmultipath-pathinfo-don-t-fail-for-devices-lacking.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Martin Wilck -Date: Wed, 30 Nov 2022 21:07:45 +0100 -Subject: [PATCH] libmultipath: pathinfo: don't fail for devices lacking - INQUIRY properties -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some SAS devices (e.g. Seagate factory recertified 'white label' drives) may -come with the Vendor field blank. This causes Multipath to fail to -complete the discovery of those devices. - -Such devices violate the SCSI Spec. From the SPC-6, §6.7.2: -"The T10 VENDOR IDENTIFICATION field contains eight bytes of left-aligned -ASCII data (see 4.3.1) identifying the manufacturer of the logical unit. The -T10 vendor identification shall be one assigned by INCITS.". - -But as we don't identify WWIDs by vendor and product, we don't need to discard -these devices right away. We can go ahead fingers crossed, and hope that the -the other VPD pages for the device are correct. - -We obviously can't look up reasonable device properties for such devices in -our hwtable. It would be up to the user to deal with that. - -Reported by: Allyn Malventano (github.com/opensvc/multipath-tools/issues/56) -Signed-off-by: Martin Wilck -Reviewed-by: Benjamin Marzinski -Signed-off-by: Benjamin Marzinski ---- - libmultipath/discovery.c | 22 +++++++++++++--------- - 1 file changed, 13 insertions(+), 9 deletions(-) - -diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c -index d9ee2cb9..67ac0e6d 100644 ---- a/libmultipath/discovery.c -+++ b/libmultipath/discovery.c -@@ -1472,6 +1472,7 @@ scsi_sysfs_pathinfo (struct path *pp, const struct _vector *hwtable) - { - struct udev_device *parent; - const char *attr_path = NULL; -+ static const char unknown[] = "UNKNOWN"; - - parent = pp->udev; - while (parent) { -@@ -1492,19 +1493,22 @@ scsi_sysfs_pathinfo (struct path *pp, const struct _vector *hwtable) - if (!attr_path || pp->sg_id.host_no == -1) - return PATHINFO_FAILED; - -- if (sysfs_get_vendor(parent, pp->vendor_id, SCSI_VENDOR_SIZE) <= 0) -- return PATHINFO_FAILED;; -- -+ if (sysfs_get_vendor(parent, pp->vendor_id, SCSI_VENDOR_SIZE) <= 0) { -+ condlog(1, "%s: broken device without vendor ID", pp->dev); -+ strlcpy(pp->vendor_id, unknown, SCSI_VENDOR_SIZE); -+ } - condlog(3, "%s: vendor = %s", pp->dev, pp->vendor_id); - -- if (sysfs_get_model(parent, pp->product_id, PATH_PRODUCT_SIZE) <= 0) -- return PATHINFO_FAILED;; -- -+ if (sysfs_get_model(parent, pp->product_id, PATH_PRODUCT_SIZE) <= 0) { -+ condlog(1, "%s: broken device without product ID", pp->dev); -+ strlcpy(pp->product_id, unknown, PATH_PRODUCT_SIZE); -+ } - condlog(3, "%s: product = %s", pp->dev, pp->product_id); - -- if (sysfs_get_rev(parent, pp->rev, PATH_REV_SIZE) < 0) -- return PATHINFO_FAILED;; -- -+ if (sysfs_get_rev(parent, pp->rev, PATH_REV_SIZE) < 0) { -+ condlog(2, "%s: broken device without revision", pp->dev); -+ strlcpy(pp->rev, unknown, PATH_REV_SIZE); -+ } - condlog(3, "%s: rev = %s", pp->dev, pp->rev); - - /* diff --git a/0025-RH-make-parse_vpd_pg83-match-scsi_id-output.patch b/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch similarity index 81% rename from 0025-RH-make-parse_vpd_pg83-match-scsi_id-output.patch rename to 0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch index 824c747..f7bca92 100644 --- a/0025-RH-make-parse_vpd_pg83-match-scsi_id-output.patch +++ b/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 137c96d16b6bb03d8a52854e152db4ee36b7d9e4 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 25 Mar 2021 13:05:10 -0500 Subject: [PATCH] RH: make parse_vpd_pg83 match scsi_id output @@ -14,10 +14,10 @@ Signed-off-by: Benjamin Marzinski 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c -index 67ac0e6d..7fdbc1c3 100644 +index 31db8758..21cfcc73 100644 --- a/libmultipath/discovery.c +++ b/libmultipath/discovery.c -@@ -1177,13 +1177,9 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, +@@ -1225,13 +1225,9 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, good_len = 8; break; case 2: @@ -33,7 +33,7 @@ index 67ac0e6d..7fdbc1c3 100644 good_len = 8; break; default: -@@ -1201,10 +1197,6 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, +@@ -1249,10 +1245,6 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, break; case 0x8: /* SCSI Name: Prio 3 */ @@ -45,10 +45,10 @@ index 67ac0e6d..7fdbc1c3 100644 case 0x1: /* T-10 Vendor ID: Prio 2 */ diff --git a/tests/vpd.c b/tests/vpd.c -index a7d2092c..2366cfba 100644 +index e3212e61..cdb111bb 100644 --- a/tests/vpd.c +++ b/tests/vpd.c -@@ -231,11 +231,13 @@ static const char * const str_prefix[] = { +@@ -232,11 +232,13 @@ static const char * const str_prefix[] = { [STR_IQN] = "iqn.", }; @@ -62,7 +62,7 @@ index a7d2092c..2366cfba 100644 /** * create_scsi_string_desc() - create a SCSI name string descriptor. -@@ -766,6 +768,7 @@ make_test_vpd_naa(2, 18); +@@ -767,6 +769,7 @@ make_test_vpd_naa(2, 18); make_test_vpd_naa(2, 17); make_test_vpd_naa(2, 16); @@ -70,7 +70,7 @@ index a7d2092c..2366cfba 100644 /* SCSI Name string: EUI64, WWID size: 17 */ make_test_vpd_str(0, 20, 18) make_test_vpd_str(0, 20, 17) -@@ -801,6 +804,7 @@ make_test_vpd_str(18, 20, 18) +@@ -802,6 +805,7 @@ make_test_vpd_str(18, 20, 18) make_test_vpd_str(18, 20, 17) make_test_vpd_str(18, 20, 16) make_test_vpd_str(18, 20, 15) @@ -78,7 +78,7 @@ index a7d2092c..2366cfba 100644 static int test_vpd(void) { -@@ -909,6 +913,7 @@ static int test_vpd(void) +@@ -910,6 +914,7 @@ static int test_vpd(void) cmocka_unit_test(test_vpd_naa_2_18), cmocka_unit_test(test_vpd_naa_2_17), cmocka_unit_test(test_vpd_naa_2_16), @@ -86,7 +86,7 @@ index a7d2092c..2366cfba 100644 cmocka_unit_test(test_vpd_str_0_20_18), cmocka_unit_test(test_vpd_str_0_20_17), cmocka_unit_test(test_vpd_str_0_20_16), -@@ -933,6 +938,7 @@ static int test_vpd(void) +@@ -934,6 +939,7 @@ static int test_vpd(void) cmocka_unit_test(test_vpd_str_18_20_17), cmocka_unit_test(test_vpd_str_18_20_16), cmocka_unit_test(test_vpd_str_18_20_15), diff --git a/0010-libmultipath-bump-ABI-version-to-18.0.0.patch b/0010-libmultipath-bump-ABI-version-to-18.0.0.patch deleted file mode 100644 index 0d9a3c1..0000000 --- a/0010-libmultipath-bump-ABI-version-to-18.0.0.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Martin Wilck -Date: Wed, 25 Jan 2023 11:35:38 +0100 -Subject: [PATCH] libmultipath: bump ABI version to 18.0.0 - -Commit 6b81153 ("libmultipath: make prflag an enum") changed -the size and member offsets of struct multipath. - -Signed-off-by: Benjamin Marzinski ---- - libmultipath/libmultipath.version | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/libmultipath/libmultipath.version b/libmultipath/libmultipath.version -index faef2a2d..015623cc 100644 ---- a/libmultipath/libmultipath.version -+++ b/libmultipath/libmultipath.version -@@ -43,7 +43,7 @@ LIBMPATHCOMMON_1.0.0 { - put_multipath_config; - }; - --LIBMULTIPATH_17.0.0 { -+LIBMULTIPATH_18.0.0 { - global: - /* symbols referenced by multipath and multipathd */ - add_foreign; diff --git a/0026-RH-add-scsi-device-handlers-to-modules-load.d.patch b/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch similarity index 89% rename from 0026-RH-add-scsi-device-handlers-to-modules-load.d.patch rename to 0011-RH-add-scsi-device-handlers-to-modules-load.d.patch index 26b0d06..3fe7c25 100644 --- a/0026-RH-add-scsi-device-handlers-to-modules-load.d.patch +++ b/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 374755791536be4870ab2e93ae36549cbaaeb800 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 25 Mar 2022 18:12:06 -0500 Subject: [PATCH] RH: add scsi device handlers to modules-load.d @@ -11,7 +11,7 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile.inc b/Makefile.inc -index 748911e2..c07bcb0c 100644 +index 03aee175..936a622f 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -16,7 +16,7 @@ READLINE := diff --git a/0011-libmultipath-use-select_reload_action-in-select_acti.patch b/0011-libmultipath-use-select_reload_action-in-select_acti.patch deleted file mode 100644 index 05cc2ce..0000000 --- a/0011-libmultipath-use-select_reload_action-in-select_acti.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 31 Jan 2023 13:34:18 -0600 -Subject: [PATCH] libmultipath: use select_reload_action in select_action - -Since we have a function to set the action to reload, use it. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/configure.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - -diff --git a/libmultipath/configure.c b/libmultipath/configure.c -index e689f8a7..050b984a 100644 ---- a/libmultipath/configure.c -+++ b/libmultipath/configure.c -@@ -729,9 +729,7 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - - if (force_reload) { - mpp->force_udev_reload = 1; -- mpp->action = ACT_RELOAD; -- condlog(3, "%s: set ACT_RELOAD (forced by user)", -- mpp->alias); -+ select_reload_action(mpp, "forced by user"); - return; - } - if (cmpp->size != mpp->size) { -@@ -744,9 +742,7 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - - if (!is_udev_ready(cmpp) && count_active_paths(mpp) > 0) { - mpp->force_udev_reload = 1; -- mpp->action = ACT_RELOAD; -- condlog(3, "%s: set ACT_RELOAD (udev incomplete)", -- mpp->alias); -+ select_reload_action(mpp, "udev incomplete"); - return; - } - diff --git a/0027-RH-compile-with-libreadline-support.patch b/0012-RH-compile-with-libreadline-support.patch similarity index 89% rename from 0027-RH-compile-with-libreadline-support.patch rename to 0012-RH-compile-with-libreadline-support.patch index df99295..0964c42 100644 --- a/0027-RH-compile-with-libreadline-support.patch +++ b/0012-RH-compile-with-libreadline-support.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From cc15379130e8aa068e97c64afd46be212b456d4f Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 15 Nov 2022 18:03:33 -0600 Subject: [PATCH] RH: compile with libreadline support @@ -12,7 +12,7 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile.inc b/Makefile.inc -index c07bcb0c..e59313c6 100644 +index 936a622f..f475f70f 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -12,7 +12,7 @@ diff --git a/0012-libmultipath-select-resize-action-even-if-reload-is-.patch b/0012-libmultipath-select-resize-action-even-if-reload-is-.patch deleted file mode 100644 index 39518c4..0000000 --- a/0012-libmultipath-select-resize-action-even-if-reload-is-.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 31 Jan 2023 13:34:19 -0600 -Subject: [PATCH] libmultipath: select resize action even if reload is forced - -The ACT_RESIZE action is the same as the ACT_RELOAD action, except that -it flushes outstanding IO because the device size is changing and -the new size might be too small for some of the outstanding IO. If we've -detected a size change, and a forced reload is requested, we still need -to flush the IO because the reload will change the device size. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/configure.c | 11 ++++++----- - 1 file changed, 6 insertions(+), 5 deletions(-) - -diff --git a/libmultipath/configure.c b/libmultipath/configure.c -index 050b984a..6811e661 100644 ---- a/libmultipath/configure.c -+++ b/libmultipath/configure.c -@@ -727,11 +727,6 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - return; - } - -- if (force_reload) { -- mpp->force_udev_reload = 1; -- select_reload_action(mpp, "forced by user"); -- return; -- } - if (cmpp->size != mpp->size) { - mpp->force_udev_reload = 1; - mpp->action = ACT_RESIZE; -@@ -740,6 +735,12 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - return; - } - -+ if (force_reload) { -+ mpp->force_udev_reload = 1; -+ select_reload_action(mpp, "forced by user"); -+ return; -+ } -+ - if (!is_udev_ready(cmpp) && count_active_paths(mpp) > 0) { - mpp->force_udev_reload = 1; - select_reload_action(mpp, "udev incomplete"); diff --git a/0013-RH-Add-mpathcleanup.patch b/0013-RH-Add-mpathcleanup.patch new file mode 100644 index 0000000..d1a8e84 --- /dev/null +++ b/0013-RH-Add-mpathcleanup.patch @@ -0,0 +1,186 @@ +From 2ef5bd86052ba0b22f4d3a16e69cdf268d90a53a Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 7 Jul 2023 15:25:59 -0500 +Subject: [PATCH] RH: Add mpathcleanup + +mpathcleanup is a program that will remove a multipath device as well as +all of the scsi path devices that make it up. + +Signed-off-by: Benjamin Marzinski +--- + multipath/Makefile | 2 + + multipath/mpathcleanup | 145 +++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 147 insertions(+) + create mode 100755 multipath/mpathcleanup + +diff --git a/multipath/Makefile b/multipath/Makefile +index 3dc241cc..47e82234 100644 +--- a/multipath/Makefile ++++ b/multipath/Makefile +@@ -25,6 +25,7 @@ install: + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) + $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ ++ $(Q)$(INSTALL_PROGRAM) -m 755 mpathcleanup $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) +@@ -49,6 +50,7 @@ endif + uninstall: + $(Q)$(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(Q)$(RM) $(DESTDIR)$(bindir)/mpathconf ++ $(Q)$(RM) $(DESTDIR)$(bindir)/mpathcleanup + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules + $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf +diff --git a/multipath/mpathcleanup b/multipath/mpathcleanup +new file mode 100755 +index 00000000..6fd921e4 +--- /dev/null ++++ b/multipath/mpathcleanup +@@ -0,0 +1,145 @@ ++#!/bin/bash ++# ++# Copyright (C) 2023 Red Hat, Inc. All rights reserved. ++# ++# This file is part of the device-mapper-multipath package. ++# ++# This copyrighted material is made available to anyone wishing to use, ++# modify, copy, or redistribute it subject to the terms and conditions ++# of the GNU General Public License v.2. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software Foundation, ++# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++unset PROGRAM FLUSH DEVICE DEVNAME MAJOR MINOR PATHDEVS PATHDEV HAVE_MULTIPATHD QUEUEING ++ ++function usage ++{ ++ echo "usage: $PROGRAM [-h] [--flush] " ++ echo "" ++ echo "remove a multipath device and its scsi path devices" ++ echo "" ++ echo "options:" ++ echo " -h, --help show this help message and exit" ++ echo " --flush disable queuing on the multipath device and" ++ echo " flush the path devices before removing" ++} ++ ++function parse_args ++{ ++ while [ -n "$1" ]; do ++ case $1 in ++ --flush) ++ FLUSH=1 ++ shift ++ ;; ++ --help | -h) ++ usage ++ exit 1 ++ ;; ++ *) ++ if [ -n "$DEVICE" ]; then ++ usage ++ exit 1 ++ fi ++ DEVICE=$1 ++ shift ++ ;; ++ esac ++ done ++} ++ ++function validate_device ++{ ++ if [ -z "$DEVICE" ]; then ++ usage ++ exit 1 ++ fi ++ if [[ "$DEVICE" =~ ^[[:digit:]]+:[[:digit:]]+$ ]]; then ++ MAJOR=${DEVICE%%:*} ++ MINOR=${DEVICE##*:} ++ DEVNAME=`dmsetup ls --target multipath | grep "($MAJOR, $MINOR)$" | awk '{print $1}'` ++ else ++ DEVNAME=`dmsetup ls --target multipath | awk '{print $1}' | grep "^$DEVICE$"` ++ fi ++ if [ -z "$DEVNAME" ]; then ++ DEVNAME=`multipath -v 1 -l $DEVICE 2>/dev/null` ++ if [ -z "$DEVNAME" ]; then ++ echo "$DEVICE is not a multipath device" ++ exit 1 ++ fi ++ # verify that this is not a native nvme multipath device ++ dmsetup ls --target multipath | awk '{print $1}' | grep -q "^$DEVNAME$" ++ if test $? -eq 1; then ++ echo "$DEVICE is not a device-mapper multipath device" ++ exit 1 ++ fi ++ fi ++ if [ -z "$MINOR" ]; then ++ MINOR=`dmsetup info -c --noheadings -o minor $DEVNAME` ++ fi ++} ++ ++function get_paths ++{ ++ PATHDEVS=`ls /sys/block/dm-$MINOR/slaves` ++ for PATHDEV in $PATHDEVS; do ++ if [[ ! "$PATHDEV" =~ ^sd[a-z]+$ ]]; then ++ echo "$PATHDEV is not a scsi device. $PROGRAM only works with scsi devices" ++ exit 1 ++ fi ++ done ++} ++ ++function remove_devs ++{ ++ pidof multipathd > /dev/null ++ HAVE_MULTIPATHD=$? ++ multipath -v2 -l "$DEVNAME" | grep features | grep -q queue_if_no_path ++ QUEUEING=$? ++ if [ -n "$FLUSH" ] && [ "$QUEUEING" -eq 0 ]; then ++ if test $HAVE_MULTIPATHD -eq 0; then ++ multipathd disablequeueing map "$DEVNAME" > /dev/null ++ else ++ dmsetup message "$DEVNAME" 0 fail_if_no_path ++ fi ++ sleep 1 ++ fi ++ if test $HAVE_MULTIPATHD -eq 0; then ++ multipath -f "$DEVNAME" ++ else ++ multipathd -Df "$DEVNAME" ++ fi ++ if test $? -eq 1; then ++ echo "$DEVICE cannot be removed" ++ exit 1 ++ fi ++ for PATHDEV in $PATHDEVS; do ++ if [ -n "$FLUSH" ]; then ++ blockdev --flushbufs /dev/"$PATHDEV" ++ fi ++ echo 1 > /sys/block/"$PATHDEV"/device/delete ++ done ++} ++ ++function verify_removal ++{ ++ multipath -v 1 -d $DEVNAME | grep -q "^$DEVNAME$" ++ if test $? -eq 0; then ++ echo "$DEVICE removed but path devices still exist" ++ exit 1 ++ fi ++ multipath -v 1 -l $DEVNAME | grep -q "^$DEVNAME$" ++ if test $? -eq 0; then ++ echo "$DEVICE removal succeeded, but device still exists" ++ exit 1 ++ fi ++} ++ ++PROGRAM="$0" ++parse_args "$@" ++validate_device ++get_paths ++remove_devs ++verify_removal diff --git a/0013-libmultipath-cleanup-ACT_CREATE-code-in-select_actio.patch b/0013-libmultipath-cleanup-ACT_CREATE-code-in-select_actio.patch deleted file mode 100644 index 3574bac..0000000 --- a/0013-libmultipath-cleanup-ACT_CREATE-code-in-select_actio.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 31 Jan 2023 13:34:20 -0600 -Subject: [PATCH] libmultipath: cleanup ACT_CREATE code in select_action - -Combine the two separate blocks that set ACT_CREATE into one. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/configure.c | 38 +++++++++++++++++--------------------- - 1 file changed, 17 insertions(+), 21 deletions(-) - -diff --git a/libmultipath/configure.c b/libmultipath/configure.c -index 6811e661..e870e0f6 100644 ---- a/libmultipath/configure.c -+++ b/libmultipath/configure.c -@@ -686,33 +686,29 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - if (mpp->need_reload || (cmpp && cmpp->need_reload)) - force_reload = 1; - -- if (!cmpp_by_name) { -- if (cmpp) { -- condlog(2, "%s: rename %s to %s", mpp->wwid, -- cmpp->alias, mpp->alias); -- strlcpy(mpp->alias_old, cmpp->alias, WWID_SIZE); -- mpp->action = ACT_RENAME; -- if (force_reload) { -- mpp->force_udev_reload = 1; -- mpp->action = ACT_FORCERENAME; -- } -- return; -+ if (!cmpp) { -+ if (cmpp_by_name) { -+ condlog(1, "%s: can't use alias \"%s\" used by %s, falling back to WWID", -+ mpp->wwid, mpp->alias, cmpp_by_name->wwid); -+ /* We can do this because wwid wasn't found */ -+ free(mpp->alias); -+ mpp->alias = strdup(mpp->wwid); - } - mpp->action = ACT_CREATE; -- condlog(3, "%s: set ACT_CREATE (map does not exist)", -- mpp->alias); -+ condlog(3, "%s: set ACT_CREATE (map does not exist%s)", -+ mpp->alias, cmpp_by_name ? ", name changed" : ""); - return; - } - -- if (!cmpp) { -- condlog(1, "%s: can't use alias \"%s\" used by %s, falling back to WWID", -- mpp->wwid, mpp->alias, cmpp_by_name->wwid); -- /* We can do this because wwid wasn't found */ -- free(mpp->alias); -- mpp->alias = strdup(mpp->wwid); -- mpp->action = ACT_CREATE; -- condlog(3, "%s: set ACT_CREATE (map does not exist, name changed)", -+ if (!cmpp_by_name) { -+ condlog(2, "%s: rename %s to %s", mpp->wwid, cmpp->alias, - mpp->alias); -+ strlcpy(mpp->alias_old, cmpp->alias, WWID_SIZE); -+ mpp->action = ACT_RENAME; -+ if (force_reload) { -+ mpp->force_udev_reload = 1; -+ mpp->action = ACT_FORCERENAME; -+ } - return; - } - diff --git a/0014-libmultipath-keep-renames-from-stopping-other-multip.patch b/0014-libmultipath-keep-renames-from-stopping-other-multip.patch deleted file mode 100644 index f597e61..0000000 --- a/0014-libmultipath-keep-renames-from-stopping-other-multip.patch +++ /dev/null @@ -1,186 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Tue, 31 Jan 2023 13:34:21 -0600 -Subject: [PATCH] libmultipath: keep renames from stopping other multipath - actions - -If select_action() is called and a multipath device needs to be renamed, -the code currently checks if force_reload is set, and if so, does the -reload after the rename. But if force_reload isn't set, only the rename -happens, regardless of what other actions are needed. This can happen if -multipathd starts up and a device needs both a reload and a rename. - -Make multipath check for resize, reload, and switch pathgroup along with -rename, and do both if necessary. - -Signed-off-by: Benjamin Marzinski -Reviewed-by: Martin Wilck ---- - libmultipath/configure.c | 62 +++++++++++++++++----------------------- - libmultipath/configure.h | 4 ++- - 2 files changed, 30 insertions(+), 36 deletions(-) - -diff --git a/libmultipath/configure.c b/libmultipath/configure.c -index e870e0f6..4a1c28bb 100644 ---- a/libmultipath/configure.c -+++ b/libmultipath/configure.c -@@ -670,7 +670,8 @@ static bool is_udev_ready(struct multipath *cmpp) - static void - select_reload_action(struct multipath *mpp, const char *reason) - { -- mpp->action = ACT_RELOAD; -+ mpp->action = mpp->action == ACT_RENAME ? ACT_RELOAD_RENAME : -+ ACT_RELOAD; - condlog(3, "%s: set ACT_RELOAD (%s)", mpp->alias, reason); - } - -@@ -681,6 +682,7 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - struct multipath * cmpp_by_name; - char * mpp_feat, * cmpp_feat; - -+ mpp->action = ACT_NOTHING; - cmpp = find_mp_by_wwid(curmp, mpp->wwid); - cmpp_by_name = find_mp_by_alias(curmp, mpp->alias); - if (mpp->need_reload || (cmpp && cmpp->need_reload)) -@@ -705,14 +707,8 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - mpp->alias); - strlcpy(mpp->alias_old, cmpp->alias, WWID_SIZE); - mpp->action = ACT_RENAME; -- if (force_reload) { -- mpp->force_udev_reload = 1; -- mpp->action = ACT_FORCERENAME; -- } -- return; -- } -- -- if (cmpp != cmpp_by_name) { -+ /* don't return here. Check for other needed actions */ -+ } else if (cmpp != cmpp_by_name) { - condlog(2, "%s: unable to rename %s to %s (%s is used by %s)", - mpp->wwid, cmpp->alias, mpp->alias, - mpp->alias, cmpp_by_name->wwid); -@@ -720,12 +716,13 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - free(mpp->alias); - mpp->alias = strdup(cmpp->alias); - mpp->action = ACT_IMPOSSIBLE; -- return; -+ /* don't return here. Check for other needed actions */ - } - - if (cmpp->size != mpp->size) { - mpp->force_udev_reload = 1; -- mpp->action = ACT_RESIZE; -+ mpp->action = mpp->action == ACT_RENAME ? ACT_RESIZE_RENAME : -+ ACT_RESIZE; - condlog(3, "%s: set ACT_RESIZE (size change)", - mpp->alias); - return; -@@ -801,14 +798,14 @@ void select_action (struct multipath *mpp, const struct _vector *curmp, - return; - } - if (cmpp->nextpg != mpp->bestpg) { -- mpp->action = ACT_SWITCHPG; -+ mpp->action = mpp->action == ACT_RENAME ? ACT_SWITCHPG_RENAME : -+ ACT_SWITCHPG; - condlog(3, "%s: set ACT_SWITCHPG (next path group change)", - mpp->alias); - return; - } -- mpp->action = ACT_NOTHING; -- condlog(3, "%s: set ACT_NOTHING (map unchanged)", -- mpp->alias); -+ if (mpp->action == ACT_NOTHING) -+ condlog(3, "%s: set ACT_NOTHING (map unchanged)", mpp->alias); - return; - } - -@@ -909,6 +906,17 @@ int domap(struct multipath *mpp, char *params, int is_daemon) - } - } - -+ if (mpp->action == ACT_RENAME || mpp->action == ACT_SWITCHPG_RENAME || -+ mpp->action == ACT_RELOAD_RENAME || -+ mpp->action == ACT_RESIZE_RENAME) { -+ conf = get_multipath_config(); -+ pthread_cleanup_push(put_multipath_config, conf); -+ r = dm_rename(mpp->alias_old, mpp->alias, -+ conf->partition_delim, mpp->skip_kpartx); -+ pthread_cleanup_pop(1); -+ if (r == DOMAP_FAIL) -+ return r; -+ } - switch (mpp->action) { - case ACT_REJECT: - case ACT_NOTHING: -@@ -916,6 +924,7 @@ int domap(struct multipath *mpp, char *params, int is_daemon) - return DOMAP_EXIST; - - case ACT_SWITCHPG: -+ case ACT_SWITCHPG_RENAME: - dm_switchgroup(mpp->alias, mpp->bestpg); - /* - * we may have avoided reinstating paths because there where in -@@ -942,6 +951,7 @@ int domap(struct multipath *mpp, char *params, int is_daemon) - break; - - case ACT_RELOAD: -+ case ACT_RELOAD_RENAME: - sysfs_set_max_sectors_kb(mpp, 1); - if (mpp->ghost_delay_tick > 0 && pathcount(mpp, PATH_UP)) - mpp->ghost_delay_tick = 0; -@@ -949,6 +959,7 @@ int domap(struct multipath *mpp, char *params, int is_daemon) - break; - - case ACT_RESIZE: -+ case ACT_RESIZE_RENAME: - sysfs_set_max_sectors_kb(mpp, 1); - if (mpp->ghost_delay_tick > 0 && pathcount(mpp, PATH_UP)) - mpp->ghost_delay_tick = 0; -@@ -956,29 +967,10 @@ int domap(struct multipath *mpp, char *params, int is_daemon) - break; - - case ACT_RENAME: -- conf = get_multipath_config(); -- pthread_cleanup_push(put_multipath_config, conf); -- r = dm_rename(mpp->alias_old, mpp->alias, -- conf->partition_delim, mpp->skip_kpartx); -- pthread_cleanup_pop(1); -- break; -- -- case ACT_FORCERENAME: -- conf = get_multipath_config(); -- pthread_cleanup_push(put_multipath_config, conf); -- r = dm_rename(mpp->alias_old, mpp->alias, -- conf->partition_delim, mpp->skip_kpartx); -- pthread_cleanup_pop(1); -- if (r) { -- sysfs_set_max_sectors_kb(mpp, 1); -- if (mpp->ghost_delay_tick > 0 && -- pathcount(mpp, PATH_UP)) -- mpp->ghost_delay_tick = 0; -- r = dm_addmap_reload(mpp, params, 0); -- } - break; - - default: -+ r = DOMAP_FAIL; - break; - } - -diff --git a/libmultipath/configure.h b/libmultipath/configure.h -index 2bf73e65..9d935db3 100644 ---- a/libmultipath/configure.h -+++ b/libmultipath/configure.h -@@ -18,9 +18,11 @@ enum actions { - ACT_RENAME, - ACT_CREATE, - ACT_RESIZE, -- ACT_FORCERENAME, -+ ACT_RELOAD_RENAME, - ACT_DRY_RUN, - ACT_IMPOSSIBLE, -+ ACT_RESIZE_RENAME, -+ ACT_SWITCHPG_RENAME, - }; - - /* diff --git a/0015-libmpathpersist-fix-resource-leak-in-update_map_pr.patch b/0015-libmpathpersist-fix-resource-leak-in-update_map_pr.patch deleted file mode 100644 index 866080f..0000000 --- a/0015-libmpathpersist-fix-resource-leak-in-update_map_pr.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Martin Wilck -Date: Thu, 2 Feb 2023 09:20:35 +0100 -Subject: [PATCH] libmpathpersist: fix resource leak in update_map_pr() - -The "no available paths" case would leak the memory resp points to. -Found by coverity. - -Fixes: 50e2c16 ("multipathd: handle no active paths in update_map_pr") - -Signed-off-by: Martin Wilck -Reviewed-by: Benjamin Marzinski -Signed-off-by: Benjamin Marzinski ---- - libmpathpersist/mpath_persist_int.c | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -diff --git a/libmpathpersist/mpath_persist_int.c b/libmpathpersist/mpath_persist_int.c -index 8b52b746..178c2f54 100644 ---- a/libmpathpersist/mpath_persist_int.c -+++ b/libmpathpersist/mpath_persist_int.c -@@ -733,7 +733,7 @@ int update_map_pr(struct multipath *mpp) - int noisy=0; - struct prin_resp *resp; - unsigned int i; -- int ret, isFound; -+ int ret = MPATH_PR_OTHER, isFound; - - if (!get_be64(mpp->reservation_key)) - { -@@ -754,7 +754,7 @@ int update_map_pr(struct multipath *mpp) - { - condlog(0,"%s: No available paths to check pr status", - mpp->alias); -- return MPATH_PR_OTHER; -+ goto out; - } - mpp->prflag = PRFLAG_UNSET; - ret = mpath_prin_activepath(mpp, MPATH_PRIN_RKEY_SA, resp, noisy); -@@ -762,15 +762,15 @@ int update_map_pr(struct multipath *mpp) - if (ret != MPATH_PR_SUCCESS ) - { - condlog(0,"%s : pr in read keys service action failed Error=%d", mpp->alias, ret); -- free(resp); -- return ret; -+ goto out; - } - -+ ret = MPATH_PR_SUCCESS; -+ - if (resp->prin_descriptor.prin_readkeys.additional_length == 0 ) - { - condlog(3,"%s: No key found. Device may not be registered. ", mpp->alias); -- free(resp); -- return MPATH_PR_SUCCESS; -+ goto out; - } - - condlog(2, "%s: Multipath reservation_key: 0x%" PRIx64 " ", mpp->alias, -@@ -795,6 +795,7 @@ int update_map_pr(struct multipath *mpp) - condlog(2, "%s: prflag flag set.", mpp->alias ); - } - -+out: - free(resp); -- return MPATH_PR_SUCCESS; -+ return ret; - } diff --git a/0020-RH-use-rpm-optflags-if-present.patch b/0020-RH-use-rpm-optflags-if-present.patch deleted file mode 100644 index 6a7fdea..0000000 --- a/0020-RH-use-rpm-optflags-if-present.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Benjamin Marzinski -Date: Wed, 19 Apr 2017 06:10:01 -0500 -Subject: [PATCH] RH: use rpm optflags if present - -Use the passed in optflags when compiling as an RPM, and keep the -default flags as close as possible to the current fedora flags, while -still being generic. - -Signed-off-by: Benjamin Marzinski ---- - Makefile.inc | 22 +++++++++++++++++----- - 1 file changed, 17 insertions(+), 5 deletions(-) - -diff --git a/Makefile.inc b/Makefile.inc -index 540e1dfc..748911e2 100644 ---- a/Makefile.inc -+++ b/Makefile.inc -@@ -78,11 +78,23 @@ ORIG_LDFLAGS := $(LDFLAGS) - SYSTEMD_CPPFLAGS := $(if $(SYSTEMD),-DUSE_SYSTEMD=$(SYSTEMD)) - SYSTEMD_LIBDEPS := $(if $(SYSTEMD),$(if $(shell test $(SYSTEMD) -gt 209 && echo 1),-lsystemd,-lsystemd-daemon)) - --OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 --WARNFLAGS := -Werror -Wall -Wextra -Wformat=2 $(WFORMATOVERFLOW) -Werror=implicit-int \ -+ifndef RPM_OPT_FLAGS -+ OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 \ -+ -Wall $(FORTIFY_OPT) -fexceptions -grecord-gcc-switches \ -+ -fasynchronous-unwind-tables -+ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-hardened-cc1 && echo 1),1) -+ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -+ endif -+ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-annobin-cc1 && echo 1),1) -+ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -+ endif -+else -+ OPTFLAGS := $(RPM_OPT_FLAGS) --param=ssp-buffer-size=4 -+endif -+WARNFLAGS := -Werror -Wextra -Wformat=2 $(WFORMATOVERFLOW) -Werror=implicit-int \ - -Werror=implicit-function-declaration -Werror=format-security \ -- $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) --CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) \ -+ $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) -Wstrict-prototypes -+CPPFLAGS := $(CPPFLAGS) \ - -DBIN_DIR=\"$(bindir)\" -DMULTIPATH_DIR=\"$(plugindir)\" \ - -DRUNTIME_DIR=\"$(runtimedir)\" \ - -DCONFIG_DIR=\"$(configdir)\" -DEXTRAVERSION=\"$(EXTRAVERSION)\" -MMD -MP -@@ -90,7 +102,7 @@ CFLAGS := --std=gnu99 $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe - BIN_CFLAGS := -fPIE -DPIE - LIB_CFLAGS := -fPIC - SHARED_FLAGS := -shared --LDFLAGS := $(LDFLAGS) -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -+LDFLAGS := $(LDFLAGS) $(RPM_LD_FLAGS) -Wl,-z,relro -Wl,-z,now -Wl,-z,defs - BIN_LDFLAGS := -pie - - # Source code directories. Don't modify. diff --git a/device-mapper-multipath.spec b/device-mapper-multipath.spec index a6fe03c..5d80d4e 100644 --- a/device-mapper-multipath.spec +++ b/device-mapper-multipath.spec @@ -1,42 +1,29 @@ Name: device-mapper-multipath -Version: 0.9.4 +Version: 0.13.0 Release: 2%{?dist} Summary: Tools to manage multipath devices using device-mapper -License: GPLv2 +# readline uses GPL-3.0-only +License: GPL-2.0-only AND GPL-3.0-only URL: http://christophe.varoqui.free.fr/ # The source for this package was pulled from upstream's git repo. Use the # following command to generate the tarball -# curl -L https://github.com/opensvc/multipath-tools/archive/0.9.4.tar.gz -o multipath-tools-0.9.4.tgz -Source0: multipath-tools-0.9.4.tgz +# curl -L https://github.com/opensvc/multipath-tools/archive/0.13.0.tar.gz -o multipath-tools-0.13.0.tgz +Source0: multipath-tools-0.13.0.tgz Source1: multipath.conf -Patch0001: 0001-multipathd-make-pr-registration-consistent.patch -Patch0002: 0002-libmultipath-make-prflag-an-enum.patch -Patch0003: 0003-multipathd-handle-no-active-paths-in-update_map_pr.patch -Patch0004: 0004-multipathd-add-missing-newline-to-cli_del_map-reply.patch -Patch0005: 0005-libmultipath-skip-extra-vector-work-in-remove_maps.patch -Patch0006: 0006-libmultipath-orphan-paths-if-coalesce_paths-frees-ne.patch -Patch0007: 0007-libmultipath-is_path_valid-check-if-device-is-in-use.patch -Patch0008: 0008-libmpathpersist-use-conf-timeout-for-updating-persis.patch -Patch0009: 0009-libmultipath-pathinfo-don-t-fail-for-devices-lacking.patch -Patch0010: 0010-libmultipath-bump-ABI-version-to-18.0.0.patch -Patch0011: 0011-libmultipath-use-select_reload_action-in-select_acti.patch -Patch0012: 0012-libmultipath-select-resize-action-even-if-reload-is-.patch -Patch0013: 0013-libmultipath-cleanup-ACT_CREATE-code-in-select_actio.patch -Patch0014: 0014-libmultipath-keep-renames-from-stopping-other-multip.patch -Patch0015: 0015-libmpathpersist-fix-resource-leak-in-update_map_pr.patch -Patch0016: 0016-RH-fixup-udev-rules-for-redhat.patch -Patch0017: 0017-RH-Remove-the-property-blacklist-exception-builtin.patch -Patch0018: 0018-RH-don-t-start-without-a-config-file.patch -Patch0019: 0019-RH-Fix-nvme-function-missing-argument.patch -Patch0020: 0020-RH-use-rpm-optflags-if-present.patch -Patch0021: 0021-RH-add-mpathconf.patch -Patch0022: 0022-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch -Patch0023: 0023-RH-reset-default-find_mutipaths-value-to-off.patch -Patch0024: 0024-RH-attempt-to-get-ANA-info-via-sysfs-first.patch -Patch0025: 0025-RH-make-parse_vpd_pg83-match-scsi_id-output.patch -Patch0026: 0026-RH-add-scsi-device-handlers-to-modules-load.d.patch -Patch0027: 0027-RH-compile-with-libreadline-support.patch +Patch0001: 0001-RH-fixup-udev-rules-for-redhat.patch +Patch0002: 0002-RH-Remove-the-property-blacklist-exception-builtin.patch +Patch0003: 0003-RH-don-t-start-without-a-config-file.patch +Patch0004: 0004-RH-Fix-nvme-function-missing-argument.patch +Patch0005: 0005-RH-use-rpm-optflags-if-present.patch +Patch0006: 0006-RH-add-mpathconf.patch +Patch0007: 0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch +Patch0008: 0008-RH-reset-default-find_mutipaths-value-to-off.patch +Patch0009: 0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch +Patch0010: 0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch +Patch0011: 0011-RH-add-scsi-device-handlers-to-modules-load.d.patch +Patch0012: 0012-RH-compile-with-libreadline-support.patch +Patch0013: 0013-RH-Add-mpathcleanup.patch # runtime Requires: %{name}-libs = %{version}-%{release} @@ -78,8 +65,8 @@ The tools are : %package libs Summary: The %{name} modules and shared library -# only libmpathcmd is LGPLv2+ -License: GPLv2 and LGPLv2+ +# only libmpathcmd is LGPL-2.1-or-later AND LGPL-2.0-or-later +License: GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.0-or-later %description libs The %{name}-libs provides the path checker @@ -104,7 +91,8 @@ kpartx manages partition creation and removal for device-mapper devices. %package -n libdmmp Summary: device-mapper-multipath C API library -License: GPLv3+ +# Automatically converted from old format: GPLv3+ - review is highly recommended. +License: GPL-3.0-or-later Requires: json-c Requires: %{name} = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} @@ -123,11 +111,10 @@ This package contains the files needed to develop applications that use device-mapper-multipath's libdmmp C API library %prep -%autosetup -n multipath-tools-0.9.4 -p1 +%autosetup -n multipath-tools-0.13.0 -p1 cp %{SOURCE1} . %build -%define _sbindir /usr/sbin %define _libdir /usr/%{_lib} %define _libmpathdir %{_libdir}/multipath %define _pkgconfdir %{_libdir}/pkgconfig @@ -158,7 +145,7 @@ rm -rf %{buildroot}/%{_initrddir} %postun if [ $1 -ge 1 ] ; then - /sbin/multipathd forcequeueing daemon > /dev/null 2>&1 || : + multipathd forcequeueing daemon > /dev/null 2>&1 || : fi %systemd_postun_with_restart multipathd.service @@ -173,8 +160,10 @@ fi %{_sbindir}/multipathd %{_sbindir}/multipathc %{_sbindir}/mpathconf +%{_sbindir}/mpathcleanup %{_sbindir}/mpathpersist %{_unitdir}/multipathd.service +%{_unitdir}/multipathd-queueing.service %{_unitdir}/multipathd.socket %{_mandir}/man5/multipath.conf.5* %{_mandir}/man8/multipath.8* @@ -184,9 +173,9 @@ fi %{_mandir}/man8/mpathpersist.8* %config /usr/lib/udev/rules.d/62-multipath.rules %config /usr/lib/udev/rules.d/11-dm-mpath.rules -%dir /usr/lib/modules-load.d -/usr/lib/modules-load.d/multipath.conf -/usr/lib/modules-load.d/scsi_dh.conf +%config /usr/lib/udev/rules.d/99-z-dm-mpath-late.rules +%dir %{_modulesloaddir} +%{_modulesloaddir}/scsi_dh.conf %{_tmpfilesdir}/multipath.conf %doc README.md %doc multipath.conf @@ -245,6 +234,124 @@ fi %{_pkgconfdir}/libdmmp.pc %changelog +* Thu Nov 13 2025 Benjamin Marzinski - 0.13.0-2 +- Move STI tests to TMT + +* Tue Nov 4 2025 Benjamin Marzinski - 0.13.0-1 +- Update source to upstream release 0.13.0 + * Previous patches 0001-0004 are included in the tarball +- Install /lib/systemd/system/multipathd-queueing.service +- Rename redhat patches + * Previous patches 0005-0017 are now patches 0001-0013 + +* Wed Jul 23 2025 Fedora Release Engineering - 0.11.1-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild + +* Thu Feb 27 2025 Benjamin Marzinski - 0.11.1-1 +- Update source to upstream staging branch for 0.11.1 plus additional + stable branch patches. + * Previous patches 0001-0032 are included in the tarball +- Rename redhat patches + * Previous patches 0033-0045 are now patches 0005-0017 + +* Sat Feb 1 2025 Benjamin Marzinski - 0.10.0-5 +- Update source to upstream staging branch for 0.10.y (will be 0.10.2 when + merged). +- Rebase redhat patches + +* Thu Jan 16 2025 Fedora Release Engineering - 0.10.0-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild + +* Sun Jan 12 2025 Zbigniew Jędrzejewski-Szmek - 0.10.0-3 +- Rebuilt for the bin-sbin merge (2nd attempt) + +* Thu Aug 29 2024 Benjamin Marzinski - 0.10.0-2 +- update CI tests. + +* Thu Aug 29 2024 Benjamin Marzinski - 0.10.0-1 +- Update source to upstream version 0.9.9 + * Previous patch 0014-multipathd-fix-flush-check-in-flush_map.patch is + included in the source tarball +- Rebase redhat patches + +* Fri Aug 9 2024 Benjamin Marzinski - 0.9.9-6 +- Add 0014-multipathd-fix-null-pointer-dereference-in-uev_updat.patch + * multipath features tracking on failed removes + +* Mon Jul 29 2024 Miroslav Suchý - 0.9.9-5 +- convert license to SPDX + +* Thu Jul 25 2024 Miroslav Suchý - 0.9.9-4 +- convert license to SPDX + +* Wed Jul 17 2024 Fedora Release Engineering - 0.9.9-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild + +* Tue Jul 09 2024 Zbigniew Jędrzejewski-Szmek - 0.9.9-2 +- Rebuilt for the bin-sbin merge + +* Thu Jun 13 2024 Benjamin Marzinski - 0.9.9-1 +- Update source to upstream version 0.9.9 + * Previous patches 0001-0044 are included in the source tarball +- Rename redhat patches + * Previous patches 0045-0057 are now patches 0001-0013 + +* Mon May 20 2024 Benjamin Marzinski - 0.9.8-1 +- Update source to upstream version 0.9.8 plus latest staging branch + * Previous patches 0014 & 0015 are included in the source tarball + * patches 0001-0044 are from the upstream staging branch +- Rename redhat patches + * Previous patches 0001-0013 are now patches 0045-0057 +- Install /lib/udev/rules.d/99-z-dm-mpath-late.rules + +* Wed Jan 24 2024 Fedora Release Engineering - 0.9.7-7 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild + +* Fri Jan 19 2024 Fedora Release Engineering - 0.9.7-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild + +* Tue Jan 16 2024 Benjamin Marzinski - 0.9.7-5 +- Add 0014-multipathd-fix-null-pointer-dereference-in-uev_updat.patch + * Fix auto_resize code to avoid a segfault +- Add 0015-multipathd-fix-auto-resize-configuration.patch + * Fix auto_resize default value + +* Thu Nov 30 2023 Benjamin Marzinski - 0.9.7-4 +- Use modulesloaddir macro for installing scsi_dh.conf + +* Wed Nov 29 2023 Benjamin Marzinski - 0.9.7-3 +- Fix multipath_conf_syntax test +- Fix restate_module test + +* Tue Nov 28 2023 Paul Donohue - 0.9.7-2 +- Modify 0006-RH-add-mpathconf.patch +- Modify 0008-RH-reset-default-find_mutipaths-value-to-off.patch + * Fix find_multipaths values in docs and mpathconf + +* Tue Nov 21 2023 Benjamin Marzinski - 0.9.7-1 +- Update source to upstream version 0.9.7 + * Previous patches 0001-0040 are included in the source tarball +- Rename redhat patches + * Previous patches 0041-0053 are now patches 0001-0013 +- Remove /usr/lib/modules-load.d/multipath.conf + * has been replaced with modprobe@dm_multipath.service unit Wants. + +* Fri Sep 22 2023 Benjamin Marzinski - 0.9.6-1 +- Update to the head of the upstream staging branch +- Rename redhat patches + * Previous patches 0001-0012 are now patches 0041-0052 +- Add 0053-RH-Add-mpathcleanup.patch + * add mpathcleanup program + +* Wed Jul 19 2023 Fedora Release Engineering - 0.9.5-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild + +* Tue May 16 2023 Benjamin Marzinski - 0.9.5-1 +- Update to the latest upstream release + * Previous patches 0001-0015 are included in the source tarball +- Rename redhat patches + * Previous patches 0016-0027 are now patches 0001-0012 + * Thu Feb 2 2023 Benjamin Marzinski - 0.9.4-2 - Update to the head of the upstream staging branch * Patches 0011-0015 are from the upstream staging branch diff --git a/plans/multipath.fmf b/plans/multipath.fmf new file mode 100644 index 0000000..876c77a --- /dev/null +++ b/plans/multipath.fmf @@ -0,0 +1,58 @@ +summary: basic functionality tests + +provision: + hardware: + memory: ">= 2 GB" + +prepare: + how: install + package: + - device-mapper-multipath + - perl + +discover: + how: shell + tests: + - name: medium_error_scsi_debug + path: /tests/medium_error_scsi_debug + test: ./main.sh + duration: 15m + - name: squelch_scsi_id + path: /tests/squelch_scsi_id + test: ./main.sh + duration: 15m + - name: multipathd_oom + path: /tests/multipathd_oom + test: ./main.sh + duration: 15m + - name: user_friendly_names + path: /tests/user_friendly_names + test: ./main.sh + duration: 15m + - name: kpartx_4k_aligned + path: /tests/kpartx_4k_aligned + test: ./main.sh + duration: 15m + - name: bindings + path: /tests/bindings + test: ./main.sh + duration: 15m + - name: restate_module + path: /tests/restate_module + test: ./main.sh + duration: 15m + - name: find_multipaths + path: /tests/find_multipaths + test: ./main.sh + duration: 15m + - name: multipath_conf_syntax + path: /tests/multipath_conf_syntax + test: ./main.sh + duration: 15m + - name: alias_clash + path: /tests/alias_clash + test: ./main.sh + duration: 15m + +execute: + how: tmt diff --git a/sources b/sources index 462cab6..233c4ea 100644 --- a/sources +++ b/sources @@ -1,2 +1,2 @@ -SHA512 (multipath-tools-0.9.4.tgz) = 5e0dcea610fc215e345444c04453a38f39c73e493c2bc53f6b3a90cd701266aabdf7c4693dfc321099af836d0019bf27355e265ad5db5deff48f8bb94ed4719d +SHA512 (multipath-tools-0.13.0.tgz) = 75c84524ee27590b8b751ea500898a44e5ac3d58d55be6bcab919d0d423049db3a4466fcb9135705cf63ba074416973bb651255063269e9f682f11d21ba57e59 SHA512 (multipath.conf) = 71953dce5a68adcf60a942305f5a66023e6f4c4baf53b1bfdb4edf65ed5b8e03db804363c36d1dcfd85591f4766f52b515269904c53b84d7b076da0b80b09942 diff --git a/tests/bindings/main.sh b/tests/bindings/main.sh index 2d6f284..76292e4 100755 --- a/tests/bindings/main.sh +++ b/tests/bindings/main.sh @@ -18,40 +18,110 @@ # Author: Lin Li #set -x -source ../include/ec.sh || exit 200 - +source ../include/tc.sh || exit 200 tlog "running $0" -trun "service multipathd stop" -rpm -q device-mapper-multipath || yum install -y device-mapper-multipath -trun "mpathconf --enable --with_multipathd y --user_friendly_names y" -trun "service multipathd status" -sleep 5 +cleanup () +{ + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove deviece" + tend + fi + tlog "removing multipath device" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" +} -trun "multipath -F" -sleep 5 -terr "modprobe -r scsi_debug" -terr "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \ -max_luns=2 no_lun_0=1" -sleep 60 +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -disk_path=$(get_scsi_debug_devices) -disk=$(basename $disk_path) -mpath_name=$(get_mpath_disk_by_scsi_device $disk) +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf + +blacklist_exceptions { + device { + vendor Linux + product scsi_debug + } +} +_EOF_ + trun "cat /etc/multipath.conf" +} + +do_reconfigure () +{ + tok "multipathd reconfigure" + sleep 5 +} + +rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath +cleanup +setup_config +trun "rm -r /etc/multipath/bindings" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done + +trun 'multipathd show maps raw format "%n"' +mpath_name=`multipathd show maps raw format "%n" | head -1` +assert "[[ -n $mpath_name ]] && [[ $mpath_name != ok ]]" new_alias="mpath_test_$$" trun "sed -i 's/$mpath_name/$new_alias/' /etc/multipath/bindings" -trun "multipath -r" -sleep 5 -tok "[[ -b /dev/mapper/$new_alias ]]" -tok is_mpath $new_alias -sleep 5 +do_reconfigure +trun 'multipathd show maps raw format "%n"' +mpath_name=`multipathd show maps raw format "%n" | head -1` +assert "[[ $mpath_name = $new_alias ]]" -trun "multipath -F" -sleep 5 -trun "modprobe -r scsi_debug" -trun "service multipathd stop" -sleep 3 -trun "multipath -W" -trun "rm /etc/multipath/bindings" +cleanup tend diff --git a/tests/find_multipaths/Makefile b/tests/find_multipaths/Makefile deleted file mode 100644 index b78dc57..0000000 --- a/tests/find_multipaths/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/bash - -# Copyright (c) 2016 Red Hat, Inc. -# # -# # This program is free software: you can redistribute it and/or modify -# # it under the terms of the GNU General Public License as published by -# # the Free Software Foundation, either version 3 of the License, or -# # (at your option) any later version. -# # -# # This program is distributed in the hope that it will be useful, -# # but WITHOUT ANY WARRANTY; without even the implied warranty of -# # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# # GNU General Public License for more details. -# # -# # You should have received a copy of the GNU General Public License -# # along with this program. If not, see . -# -# # Author: Lin Li - -.PHONY: all install download clean - -BUILT_FILES= - -FILES=$(METADATA) Makefile PURPOSE main.sh - -run: $(FILES) build - ./main.sh - -build: $(BUILT_FILES) - chmod a+x ./main.sh - -clean: - rm -f *~ *.rpm $(BUILT_FILES) - -include /usr/share/rhts/lib/rhts-make.include - -$(METADATA): Makefile - @touch $(METADATA) - @echo "Owner: LiLin " > $(METADATA) - @echo "Name: $(TEST)" >> $(METADATA) - @echo "Path: $(TEST_DIR)" >> $(METADATA) - @echo "License: GPLv3" >> $(METADATA) - @echo "TestVersion: $(TESTVERSION)" >> $(METADATA) - @echo "Description: find_multipaths" >> $(METADATA) - @echo "TestTime: 15m" >> $(METADATA) - @echo "RunFor: device-mapper-multipath" >> $(METADATA) - @echo "Requires: device-mapper-multipath" >> $(METADATA) - - rhts-lint $(METADATA) diff --git a/tests/find_multipaths/main.sh b/tests/find_multipaths/main.sh index a39af79..28c325c 100755 --- a/tests/find_multipaths/main.sh +++ b/tests/find_multipaths/main.sh @@ -18,38 +18,92 @@ # Author: Lin Li #set -x -source ../include/ec.sh || exit 200 +source ../include/tc.sh || exit 200 +tlog "running $0" + +remove_devices () +{ + local retries + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove devices" + cleanup + tend + fi + tlog "removing multipath devices" + trun "udevadm settle" + trun "multipath -F" + sleep 2 + done +} cleanup () { - trun "multipathd disablequeueing maps" - trun "service multipathd stop" - sleep 5 - trun "udevadm settle" - trun "multipath -F" - sleep 5 - trun "modprobe -r scsi_debug" + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove devices" + tend + fi + tlog "removing multipath devices" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" + trun "rm -f /etc/multipath/wwids" + trun "rm -r /etc/multipath/bindings" } -tlog "running $0" +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -# which not set find_multipaths yes, so multipath always create a multipath device for single device -# so stop service and reconfig with --find_multipaths y, and reload/start the service again. -rpm -q device-mapper-multipath || yum install -y device-mapper-multipath +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y --find_multipaths y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf -# test with find_multipath=y, will not multipath for the single device; reload/start the service to enable the config -cleanup -trun "rm -f /etc/multipath.conf" -trun "mpathconf --enable --user_friendly_names y --find_multipaths y --with_multipathd n" -sed -i '/^blacklist[[:space:]]*{/ a\ - device {\n vendor ".*"\n product ".*"\n } -' /etc/multipath.conf -if grep -qw blacklist_exceptions /etc/multipath.conf ; then - sed -i '/^blacklist_exceptions[[:space:]]*{/ a\ - device {\n vendor Linux\n product scsi_debug\n } -' /etc/multipath.conf -else - cat << _EOF_ >> /etc/multipath.conf blacklist_exceptions { device { vendor Linux @@ -57,56 +111,69 @@ blacklist_exceptions { } } _EOF_ -fi -trun "service multipathd start" + trun "cat /etc/multipath.conf" +} + +do_reconfigure () +{ + trun "cat /etc/multipath.conf" + tok "multipathd reconfigure" + sleep 5 +} + +trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath" +cleanup +setup_config + +# test with find_multipath=y, will not multipath the single device trun "modprobe scsi_debug" sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ $mpath_name = '[orphan]' ]]" +remove_devices + +# test with find_multipath=n, will multipath the single device +trun 'mpathconf --find_multipaths n' +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" +remove_devices + +# test with find_multipath=y, with multipath single device with known WWID +trun 'mpathconf --find_multipaths y' +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" +remove_devices + +# Clear WWID, test with find_multipath=y, will not multipath single device trun "multipath -W" -cat /etc/multipath/wwids -trun "multipath" -disk_path=$(get_scsi_debug_devices) -disk_node=$(basename $disk_path) -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok '[[ $mpath_name = "[orphan]" ]]' - -# test with find_multipath=n, will multipath for the single device -trun "mpathconf --user_friendly_names y --find_multipaths n --with_multipathd y" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" - -# flush new created path -trun "multipath -F" -sleep 1 - -# test with find_multipath=y, A path has the same WWID as a multipath device that was previously created -trun "mpathconf --user_friendly_names y --find_multipaths y --with_multipathd y" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" -trun "multipath -F" -sleep 1 - -# Clear wwid, test with find_multipath=y, will not multipath for the single device -trun "multipath -W" -trun "service multipathd reload" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok '[[ $mpath_name = "[orphan]" ]]' - -trun "multipath -F" -sleep 5 -trun "modprobe -r scsi_debug" +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ $mpath_name = '[orphan]' ]]" +remove_devices +assert 'rmmod scsi_debug' # test find_multipaths=y create device for paths have same wwid -tok "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 max_luns=2 no_lun_0=1" -sleep 10 -disk_paths=$(get_scsi_debug_devices) -disk_node=$(basename $disk_paths) -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" cleanup -trun "multipath -W" -cat /etc/multipath/wwids tend diff --git a/tests/include/ec.sh b/tests/include/ec.sh index 22dfc40..4b0aba9 100755 --- a/tests/include/ec.sh +++ b/tests/include/ec.sh @@ -44,9 +44,12 @@ function _init (){ } function _destroy (){ - sleep 10 - Cmd "multipath -F" + Cmd "multipathd disablequeueing maps" sleep 5 + Cmd "multipath -DF -R2" + Cmd "service multipathd stop" + sleep 5 + Cmd "udevadm settle" Cmd "modprobe -r scsi_debug" } @@ -174,10 +177,7 @@ AA fi #setup scsi_debug echo "INFO: Loading scsi_debug module for simulation of mpath" - modprobe scsi_debug \ - num_tgts=1 vpd_use_hostno=0 \ - add_host=4 delay=20 \ - max_luns=2 no_lun_0=1 2>&1 1>/dev/null + modprobe scsi_debug vpd_use_hostno=0 add_host=2 echo "INFO: Waiting for udev to create /dev/sdX" sleep 15s #wait for udev to create /dev/sdX @@ -189,8 +189,6 @@ AA #enable multipath for scsi_debug. cat << AA > /etc/multipath.conf defaults { -#Enable multibus is for mutlbus testing - path_grouping_policy multibus user_friendly_names yes } blacklist { diff --git a/tests/medium_error_scsi_debug/main.sh b/tests/medium_error_scsi_debug/main.sh index db2f008..35c6e6f 100755 --- a/tests/medium_error_scsi_debug/main.sh +++ b/tests/medium_error_scsi_debug/main.sh @@ -16,47 +16,51 @@ # along with this program. If not, see . # Author: LiLin +source ../include/tc.sh || exit 200 -function cleanup() +cleanup() { sleep 5 udevadm settle - multipath -F + trun "multipath -DF" sleep 5 - modprobe -r scsi_debug - - return 0 + trun "modprobe -r scsi_debug" } -yum -y install device-mapper device-mapper-multipath -mpathconf --enable -service multipathd stop -modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 max_luns=2 no_lun_0=1 opts=2 +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} + +tlog "running $0" +rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath +trun "multipathd disablequeueing maps" +cleanup +trun "service multipathd stop" +trun "rm -f /etc/multipath.conf" +trun "mpathconf --enable" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2 opts=2" sleep 5 -multipath > /dev/null +trun "multipath" sleep 5 +trun "multipath -l" mpathdev=`multipath -l | grep scsi_debug | awk '{print $1}' | head -1` -if [ -z "$mpathdev" ]; then - echo "------- FAIL, no multipath device created -----" - cleanup - exit 1 -fi +assert "[[ -n \"$mpathdev\" ]]" before_active=`multipath -l $mpathdev | grep "active undef" | wc -l` +tlog "before active = ${before_active}" IO_error=`dd if=/dev/zero of=/dev/mapper/$mpathdev bs=1024 seek=2330 count=10 2>&1 | grep -o "Input/output error" ` -if [ -n "$IO_error" ];then - after_active=`multipath -l $mpathdev | grep "active undef" | wc -l` - if [ "$before_active" -eq "$after_active" ]; then - echo "------- PASS, a medium error, correctly generated an I/O error and did not fail paths -----" - cleanup - exit 0 - else - echo "------- FAIL, paths failed -----" - cleanup - exit 1 - fi -else - echo "------- FAIL, did not generate an I/O error -----" - cleanup - exit 1 -fi +assert "[[ -n \"$IO_error\" ]]" +after_active=`multipath -l $mpathdev | grep "active undef" | wc -l` +tlog "after active = ${after_active}" +assert "[[ \"$before_active\" -eq \"$after_active\" ]]" +cleanup +tend diff --git a/tests/multipath_conf_syntax/main.sh b/tests/multipath_conf_syntax/main.sh index 331d65e..fb303c3 100755 --- a/tests/multipath_conf_syntax/main.sh +++ b/tests/multipath_conf_syntax/main.sh @@ -119,7 +119,7 @@ tok "multipath -ll | grep mypath" # test wrong alias keyword trun "sed -i 's/alias.*$/alia mypath/g' /etc/multipath.conf" -tok "multipath 2>&1 | grep 'invalid keyword: alia'" +tok "multipath 2>&1 | grep 'invalid keyword in the multipath section: alia'" trun "multipath -r" tok "multipath -ll | grep mpath" trun "sed -i 's/alia.*$/alias mypath/g' /etc/multipath.conf" diff --git a/tests/provision.fmf b/tests/provision.fmf deleted file mode 100644 index 62a6eba..0000000 --- a/tests/provision.fmf +++ /dev/null @@ -1,5 +0,0 @@ ---- - -standard-inventory-qcow2: - qemu: - m: 2G diff --git a/tests/restate_module/main.sh b/tests/restate_module/main.sh index 7f3279d..be60eba 100755 --- a/tests/restate_module/main.sh +++ b/tests/restate_module/main.sh @@ -48,10 +48,8 @@ rpm -q device-mapper-multipath || yum install -y device-mapper-multipath tlog "device-mapper-multipath is installed" # cleanup existing devices trun "rm /etc/multipath.conf" -trun "mpathconf --enable --with_module y" -sed -i '/^defaults[[:space:]]*{/ a\ - max_polling_interval 10 -' /etc/multipath.conf +trun "mpathconf --enable --with_module y --option max_polling_interval:10" +trun "mpathconf --option detect_pgpolicy_use_tpg:yes" trun "service multipathd stop" trun "multipath -F" sleep 5 @@ -69,7 +67,7 @@ tlog "Checking if active path count equals 2" assert "[[ $pathcount -eq 2 ]]" tlog "offline one path device" -pathname=`multipathd show paths raw format "%d %m" | grep ${mpathdev} | head -1 | awk '{print $1}'` +pathname=`multipathd show paths raw format "%d %m %p" | grep ${mpathdev} | sort -k 3n | head -1 | awk '{print $1}'` tlog "path to offline: ${pathname}" trun "echo 'offline' > /sys/block/${pathname}/device/state" tlog "waiting for multipathd to fail path" diff --git a/tests/tests.yml b/tests/tests.yml deleted file mode 100644 index 15f26d2..0000000 --- a/tests/tests.yml +++ /dev/null @@ -1,44 +0,0 @@ ---- -# No tests suitable for atomic environment -# No tests suitable for container environment - -# Tests suitable for classic environment -- hosts: localhost - roles: - - role: standard-test-basic - tags: - - classic - tests: - - medium_error_scsi_debug: - run: ./main.sh - timeout: 15m - - squelch_scsi_id: - run: ./main.sh - timeout: 15m - - multipathd_oom: - run: ./main.sh - timeout: 15m - - user_friendly_names: - run: ./main.sh - timeout: 15m - - kpartx_4k_aligned: - run: ./main.sh - timeout: 15m - - bindings: - run: ./main.sh - timeout: 15m - - restate_module: - run: ./main.sh - timeout: 15m - - find_multipaths: - run: ./main.sh - timeout: 15m - - multipath_conf_syntax: - run: ./main.sh - timeout: 15m - - alias_clash: - run: ./main.sh - timeout: 15m - required_packages: - - device-mapper-multipath - - perl diff --git a/tests/user_friendly_names/main.sh b/tests/user_friendly_names/main.sh index 56082fd..1d48801 100755 --- a/tests/user_friendly_names/main.sh +++ b/tests/user_friendly_names/main.sh @@ -17,50 +17,125 @@ # Author: Lin Li -source ../include/ec.sh || exit 200 - +source ../include/tc.sh || exit 200 tlog "running $0" -trun "rpm -q device-mapper-multipath || yum install -y device-mapper-multipath" -trun "mpathconf --enable --with_multipathd y --user_friendly_names y" +cleanup () +{ + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove deviece" + tend + fi + tlog "removing multipath device" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" +} -# backup the /etc/multipath.conf -trun "cp /etc/multipath.conf /etc/multipath.conf.$$" -trun "multipath -F" +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -trun "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \ -max_luns=2 no_lun_0=1" -trun "multipath" -# wwid shown slowly on s390x by the script framework, but normally when run by multipath command directly -# so extend sleep time -sleep 20 +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf -disk=$(get_scsi_debug_devices) -disk=$(basename $disk) -wwid=$(get_wwid_of_disk $disk) -mpath=$(get_mpath_disk_by_scsi_device $disk) +blacklist_exceptions { + device { + vendor Linux + product scsi_debug + } +} -# user_friendly_names = yes and mpath=test -#cur_dir=/mnt/tests/kernel/storage/multipath/user_friendly_names/ -#cur_dir=/home/test/scratch/device-mapper-multipath/user_friendly_names -trun "cat multipath.conf.yes | sed "s/your_wwid/$wwid/g" > /etc/multipath.conf" -trun "cat -n /etc/multipath.conf" -trun "multipath -r" -echo ">>> Verify 'test ($wwid)' is present ..." -trun "multipath -ll" -tok "multipath -ll | egrep \"^test\"" +multipaths { + multipath { + wwid TEST_WWID + alias test + } +} +_EOF_ + trun "cat /etc/multipath.conf" +} -# user_friendly_names = no -trun "cat multipath.conf.no > /etc/multipath.conf" -trun "multipath -r" -echo ">>> Verify 'test' is gone but '$wwid' present ..." -trun "multipath -ll" -tok "multipath -ll | egrep \"^$wwid\"" -sleep 10 -tok "multipath -F $wwid" -sleep 10 -trun "modprobe -r scsi_debug" +do_reconfigure () +{ + trun "cat /etc/multipath.conf" + tok "multipathd reconfigure" + sleep 5 +} -trun "cp /etc/multipath.conf.$$ /etc/multipath.conf" -trun "multipath -F; multipath" +trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath" +cleanup +setup_config +trun "rm -r /etc/multipath/bindings" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done +trun 'multipathd show maps raw format "%n %w"' +# verify user_friendly_name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q mpath' +wwid=`multipathd show maps raw format "%w" | head -1` +assert "[[ -n $wwid ]] && [[ $wwid != ok ]]" +sed -i 's/TEST_WWID/'"$wwid"'/' /etc/multipath.conf +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +# verify configured alias takes precedence over user_friendly_name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q test' +trun "mpathconf --user_friendly_names n" +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +# verify configured alias takes precedence over wwid name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q test' +sed -i 's/'"$wwid"'/TEST_WWID/' /etc/multipath.conf +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +tok 'multipathd show maps raw format "%n" | head -1 | grep -q '"$wwid" +cleanup tend diff --git a/tests/user_friendly_names/multipath.conf.no b/tests/user_friendly_names/multipath.conf.no deleted file mode 100644 index b916bfb..0000000 --- a/tests/user_friendly_names/multipath.conf.no +++ /dev/null @@ -1,3 +0,0 @@ -defaults { - user_friendly_names no -} diff --git a/tests/user_friendly_names/multipath.conf.yes b/tests/user_friendly_names/multipath.conf.yes deleted file mode 100644 index ffc21bb..0000000 --- a/tests/user_friendly_names/multipath.conf.yes +++ /dev/null @@ -1,11 +0,0 @@ -defaults { - user_friendly_names yes -} - -multipaths { - multipath { - wwid your_wwid - alias test - } -} -