diff --git a/tests/.fmf/version b/.fmf/version similarity index 100% rename from tests/.fmf/version rename to .fmf/version diff --git a/.gitignore b/.gitignore index 18226b9..c297b30 100644 --- a/.gitignore +++ b/.gitignore @@ -28,3 +28,10 @@ multipath-tools-091027.tar.gz /multipath-tools-0.9.3.tgz /multipath-tools-0.9.4.tgz /multipath-tools-0.9.5.tgz +/multipath-tools-0.9.6.tgz +/multipath-tools-0.9.7.tgz +/multipath-tools-0.9.8.tgz +/multipath-tools-0.9.9.tgz +/multipath-tools-0.10.0.tgz +/multipath-tools-0.11.1.tgz +/multipath-tools-0.13.0.tgz diff --git a/0001-RH-fixup-udev-rules-for-redhat.patch b/0001-RH-fixup-udev-rules-for-redhat.patch index 618603c..ed5b7e9 100644 --- a/0001-RH-fixup-udev-rules-for-redhat.patch +++ b/0001-RH-fixup-udev-rules-for-redhat.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 64a07df23affd21842fdc604887276e62e5b41de Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 13 Apr 2017 07:22:23 -0500 Subject: [PATCH] RH: fixup udev rules for redhat @@ -9,58 +9,55 @@ different naming scheme for partitions than SuSE. Signed-off-by: Benjamin Marzinski --- - Makefile.inc | 4 ++-- - kpartx/kpartx.rules | 2 +- - multipath/Makefile | 4 ++-- - 3 files changed, 5 insertions(+), 5 deletions(-) + Makefile.inc | 2 +- + kpartx/kpartx.rules.in | 2 +- + multipath/Makefile | 4 ++-- + 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Makefile.inc b/Makefile.inc -index 2e25d2ea..540e1dfc 100644 +index 9e3dc466..ead89030 100644 --- a/Makefile.inc +++ b/Makefile.inc -@@ -34,9 +34,9 @@ endif +@@ -34,7 +34,7 @@ endif # Paths. All these can be overridden on the "make" command line. prefix := # Prefix for binaries -exec_prefix := $(prefix) +exec_prefix := $(prefix)/usr # Prefix for non-essential libraries (libdmmp) --usr_prefix := $(prefix) -+usr_prefix := $(prefix)/usr - # Where to install systemd-related files. systemd is usually installed under /usr - # Note: some systemd installations use separate "prefix" and "rootprefix". - # In this case, override only unitdir to use systemd's "rootprefix" instead of $(systemd_prefix) -diff --git a/kpartx/kpartx.rules b/kpartx/kpartx.rules -index 1969dee0..d2b28233 100644 ---- a/kpartx/kpartx.rules -+++ b/kpartx/kpartx.rules + usr_prefix := $(if $(prefix),$(prefix),/usr) + # Prefix for configuration files (multipath.conf) +diff --git a/kpartx/kpartx.rules.in b/kpartx/kpartx.rules.in +index 9d879609..2049eb8f 100644 +--- a/kpartx/kpartx.rules.in ++++ b/kpartx/kpartx.rules.in @@ -39,6 +39,6 @@ LABEL="mpath_kpartx_end" GOTO="kpartx_end" LABEL="run_kpartx" --RUN+="/sbin/kpartx -un -p -part /dev/$name" -+RUN+="/sbin/kpartx -un /dev/$name" +-RUN+="@BINDIR@/kpartx -un -p -part /dev/$name" ++RUN+="@BINDIR@/kpartx -un /dev/$name" LABEL="kpartx_end" diff --git a/multipath/Makefile b/multipath/Makefile -index 73db991a..b3c2cc81 100644 +index 67fb5e62..2ea9e528 100644 --- a/multipath/Makefile +++ b/multipath/Makefile -@@ -24,7 +24,7 @@ install: - $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ +@@ -27,7 +27,7 @@ install: $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) - $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/56-multipath.rules + $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/62-multipath.rules - $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(modulesloaddir) - $(Q)$(INSTALL_PROGRAM) -m 644 modules-load.conf $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(tmpfilesdir) -@@ -44,7 +44,7 @@ uninstall: - $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(INSTALL_PROGRAM) -m 644 tmpfiles.conf $(DESTDIR)$(tmpfilesdir)/multipath.conf + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man8 +@@ -50,7 +50,7 @@ uninstall: + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/scsi_dh.conf - $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules + $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules $(Q)$(RM) $(DESTDIR)$(mandir)/man8/$(EXEC).8 $(Q)$(RM) $(DESTDIR)$(mandir)/man5/$(EXEC).conf.5 - + $(Q)$(RM) $(DESTDIR)$(tmpfilesdir)/multipath.conf diff --git a/0002-RH-Remove-the-property-blacklist-exception-builtin.patch b/0002-RH-Remove-the-property-blacklist-exception-builtin.patch index cbd2480..b8e580a 100644 --- a/0002-RH-Remove-the-property-blacklist-exception-builtin.patch +++ b/0002-RH-Remove-the-property-blacklist-exception-builtin.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From f7be16ac9fce97585a4552d49f3d3c54a93c9c17 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Wed, 2 Jul 2014 12:49:53 -0500 Subject: [PATCH] RH: Remove the property blacklist exception builtin @@ -13,26 +13,25 @@ it. Signed-off-by: Benjamin Marzinski --- - libmultipath/blacklist.c | 6 ++---- - multipath/multipath.conf.5 | 11 ++++++----- - tests/blacklist.c | 7 ++----- - 3 files changed, 10 insertions(+), 14 deletions(-) + libmultipath/blacklist.c | 5 ++--- + multipath/multipath.conf.5.in | 11 ++++++----- + tests/blacklist.c | 7 ++----- + 3 files changed, 10 insertions(+), 13 deletions(-) diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c -index 8d15d2ea..eff690fd 100644 +index 17e1b54a..10d13e98 100644 --- a/libmultipath/blacklist.c +++ b/libmultipath/blacklist.c -@@ -201,9 +201,6 @@ setup_default_blist (struct config * conf) - if (store_ble(conf->blist_devnode, "!^(sd[a-z]|dasd[a-z]|nvme[0-9])", ORIGIN_DEFAULT)) - return 1; - +@@ -230,8 +230,6 @@ setup_default_blist (struct config * conf) + ORIGIN_DEFAULT)) + return 1; + } - if (store_ble(conf->elist_property, "(SCSI_IDENT_|ID_WWN)", ORIGIN_DEFAULT)) - return 1; -- + vector_foreach_slot (conf->hwtable, hwe, i) { if (hwe->bl_product) { - if (find_blacklist_device(conf->blist_device, -@@ -409,7 +406,8 @@ filter_property(const struct config *conf, struct udev_device *udev, +@@ -438,7 +436,8 @@ filter_property(const struct config *conf, struct udev_device *udev, *uid_attribute != '\0'; bool uid_attr_seen = false; @@ -42,11 +41,11 @@ index 8d15d2ea..eff690fd 100644 udev_list_entry_foreach(list_entry, udev_device_get_properties_list_entry(udev)) { -diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 -index b4dccd1b..284282c6 100644 ---- a/multipath/multipath.conf.5 -+++ b/multipath/multipath.conf.5 -@@ -1367,9 +1367,14 @@ keywords. Both are regular expressions. For a full description of these keywords +diff --git a/multipath/multipath.conf.5.in b/multipath/multipath.conf.5.in +index 3c9ae097..ba291e11 100644 +--- a/multipath/multipath.conf.5.in ++++ b/multipath/multipath.conf.5.in +@@ -1470,9 +1470,14 @@ keywords. Both are regular expressions. For a full description of these keywords Regular expression for an udev property. All devices that have matching udev properties will be excluded/included. The handling of the \fIproperty\fR keyword is special, @@ -62,7 +61,7 @@ index b4dccd1b..284282c6 100644 . .RS .PP -@@ -1380,10 +1385,6 @@ Blacklisting by missing properties is only applied to devices which do have the +@@ -1483,10 +1488,6 @@ Blacklisting by missing properties is only applied to devices which do have the property specified by \fIuid_attribute\fR (e.g. \fIID_SERIAL\fR) set. Previously, it was applied to every device, possibly causing devices to be blacklisted because of temporary I/O error conditions. @@ -74,10 +73,10 @@ index b4dccd1b..284282c6 100644 .TP .B protocol diff --git a/tests/blacklist.c b/tests/blacklist.c -index 882aa3a1..6a22b660 100644 +index ab3da619..52ae03e0 100644 --- a/tests/blacklist.c +++ b/tests/blacklist.c -@@ -375,9 +375,8 @@ static void test_property_missing(void **state) +@@ -371,9 +371,8 @@ static void test_property_missing(void **state) { static struct udev_device udev = { "sdb", { "ID_FOO", "ID_BAZ", "ID_BAR", "ID_SERIAL", NULL } }; conf.blist_property = blist_property_wwn; @@ -88,7 +87,7 @@ index 882aa3a1..6a22b660 100644 assert_int_equal(filter_property(&conf, &udev, 3, "ID_BLAH"), MATCH_NOTHING); assert_int_equal(filter_property(&conf, &udev, 3, ""), -@@ -469,9 +468,7 @@ static void test_filter_path_missing1(void **state) +@@ -465,9 +464,7 @@ static void test_filter_path_missing1(void **state) conf.blist_device = blist_device_foo_bar; conf.blist_protocol = blist_protocol_fcp; conf.blist_wwid = blist_wwid_xyzzy; diff --git a/0003-RH-don-t-start-without-a-config-file.patch b/0003-RH-don-t-start-without-a-config-file.patch index e6e03b4..05d4e7a 100644 --- a/0003-RH-don-t-start-without-a-config-file.patch +++ b/0003-RH-don-t-start-without-a-config-file.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 5613e07ce9cabf2fdc402f6f102cc54bd1059800 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Wed, 15 Oct 2014 10:39:30 -0500 Subject: [PATCH] RH: don't start without a config file @@ -12,19 +12,20 @@ simple way to disable multipath. Simply removing or renaming Signed-off-by: Benjamin Marzinski --- - libmultipath/config.c | 13 +++++++++++++ - libmultipath/config.h | 1 + - multipath/multipath.rules.in | 1 + - multipathd/multipathd.8 | 2 ++ - multipathd/multipathd.service | 1 + - multipathd/multipathd.socket | 1 + - 6 files changed, 19 insertions(+) + libmultipath/config.c | 13 +++++++++++++ + libmultipath/config.h | 1 + + multipath/main.c | 6 ++++++ + multipath/multipath.rules.in | 1 + + multipathd/multipathd.8.in | 2 ++ + multipathd/multipathd.service.in | 1 + + multipathd/multipathd.socket.in | 1 + + 7 files changed, 25 insertions(+) diff --git a/libmultipath/config.c b/libmultipath/config.c -index 5c5c0726..183b319d 100644 +index 8b424d18..b8317f4d 100644 --- a/libmultipath/config.c +++ b/libmultipath/config.c -@@ -966,6 +966,19 @@ int _init_config (const char *file, struct config *conf) +@@ -937,6 +937,19 @@ int init_config__ (const char *file, struct config *conf) } factorize_hwtable(conf->hwtable, builtin_hwtable_size, file); validate_pctable(conf->overrides, 0, file); @@ -45,7 +46,7 @@ index 5c5c0726..183b319d 100644 conf->processed_main_config = 1; diff --git a/libmultipath/config.h b/libmultipath/config.h -index 87947469..0dc89c16 100644 +index 5b4ebf8c..2302eacc 100644 --- a/libmultipath/config.h +++ b/libmultipath/config.h @@ -10,6 +10,7 @@ @@ -56,8 +57,37 @@ index 87947469..0dc89c16 100644 enum devtypes { DEV_NONE, +diff --git a/multipath/main.c b/multipath/main.c +index f2adcdeb..31012874 100644 +--- a/multipath/main.c ++++ b/multipath/main.c +@@ -834,11 +834,14 @@ main (int argc, char *argv[]) + char *dev = NULL; + struct config *conf; + bool enable_foreign = false; ++ bool have_config; ++ struct stat buf; + + libmultipath_init(); + if (atexit(dm_lib_exit) || atexit(libmultipath_exit)) + condlog(1, "failed to register cleanup handler for libmultipath: %m"); + logsink = LOGSINK_STDERR_WITH_TIME; ++ have_config = (stat(DEFAULT_CONFIGFILE, &buf) == 0); + if (init_config(DEFAULT_CONFIGFILE)) + exit(RTVL_FAIL); + if (atexit(uninit_config)) +@@ -1092,6 +1095,9 @@ main (int argc, char *argv[]) + while ((r = configure(conf, cmd, dev_type, dev)) == RTVL_RETRY) + condlog(3, "restart multipath configuration process"); + ++ if (!have_config && r == RTVL_OK && ++ (cmd == CMD_LIST_SHORT || cmd == CMD_LIST_LONG)) ++ r = RTVL_FAIL; + out: + put_multipath_config(conf); + if (dev) diff --git a/multipath/multipath.rules.in b/multipath/multipath.rules.in -index 6f123760..70b69a06 100644 +index 2ac1972f..cc248231 100644 --- a/multipath/multipath.rules.in +++ b/multipath/multipath.rules.in @@ -9,6 +9,7 @@ IMPORT{cmdline}="nompath" @@ -68,11 +98,11 @@ index 6f123760..70b69a06 100644 ENV{DEVTYPE}!="partition", GOTO="test_dev" IMPORT{parent}="DM_MULTIPATH_DEVICE_PATH" -diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8 -index bdf102eb..a16a0bd5 100644 ---- a/multipathd/multipathd.8 -+++ b/multipathd/multipathd.8 -@@ -48,6 +48,8 @@ map regains its maximum performance and redundancy. +diff --git a/multipathd/multipathd.8.in b/multipathd/multipathd.8.in +index 8815e099..342e363e 100644 +--- a/multipathd/multipathd.8.in ++++ b/multipathd/multipathd.8.in +@@ -49,6 +49,8 @@ map regains its maximum performance and redundancy. With the \fB-k\fR option, \fBmultipathd\fR acts as a client utility that sends commands to a running instance of the multipathd daemon (see \fBCOMMANDS\fR below). @@ -81,22 +111,22 @@ index bdf102eb..a16a0bd5 100644 . . .\" ---------------------------------------------------------------------------- -diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service -index 5a9cde12..311f49c7 100644 ---- a/multipathd/multipathd.service -+++ b/multipathd/multipathd.service -@@ -6,6 +6,7 @@ Wants=systemd-udevd-kernel.socket - After=systemd-udevd-kernel.socket +diff --git a/multipathd/multipathd.service.in b/multipathd/multipathd.service.in +index eb58943c..ab166435 100644 +--- a/multipathd/multipathd.service.in ++++ b/multipathd/multipathd.service.in +@@ -6,6 +6,7 @@ Wants=systemd-udevd-kernel.socket multipathd-queueing.service @MODPROBE_UNIT@ + After=systemd-udevd-kernel.socket @MODPROBE_UNIT@ After=multipathd.socket systemd-remount-fs.service Before=initrd-cleanup.service +ConditionPathExists=/etc/multipath.conf DefaultDependencies=no Conflicts=shutdown.target Conflicts=initrd-cleanup.service -diff --git a/multipathd/multipathd.socket b/multipathd/multipathd.socket -index c777e5e3..3c20a2ff 100644 ---- a/multipathd/multipathd.socket -+++ b/multipathd/multipathd.socket +diff --git a/multipathd/multipathd.socket.in b/multipathd/multipathd.socket.in +index 11002fce..5ed24757 100644 +--- a/multipathd/multipathd.socket.in ++++ b/multipathd/multipathd.socket.in @@ -1,6 +1,7 @@ [Unit] Description=multipathd control socket diff --git a/0004-RH-Fix-nvme-function-missing-argument.patch b/0004-RH-Fix-nvme-function-missing-argument.patch index ced7159..33a8d5f 100644 --- a/0004-RH-Fix-nvme-function-missing-argument.patch +++ b/0004-RH-Fix-nvme-function-missing-argument.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 283b5dd645663a2cf16f2813581772d7a84db6ad Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 25 Jan 2019 14:54:56 -0600 Subject: [PATCH] RH: Fix nvme function missing argument @@ -12,10 +12,10 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libmultipath/nvme/argconfig.h b/libmultipath/nvme/argconfig.h -index adb192b6..bfd10ef8 100644 +index b3caa7be..f91504c9 100644 --- a/libmultipath/nvme/argconfig.h +++ b/libmultipath/nvme/argconfig.h -@@ -76,7 +76,7 @@ struct argconfig_commandline_options { +@@ -63,7 +63,7 @@ struct argconfig_commandline_options { extern "C" { #endif diff --git a/0005-RH-use-rpm-optflags-if-present.patch b/0005-RH-use-rpm-optflags-if-present.patch index 6a7fdea..7a6f57f 100644 --- a/0005-RH-use-rpm-optflags-if-present.patch +++ b/0005-RH-use-rpm-optflags-if-present.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From bf46f8029998498045bb055415ba3ff515c79eaa Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Wed, 19 Apr 2017 06:10:01 -0500 Subject: [PATCH] RH: use rpm optflags if present @@ -9,19 +9,18 @@ still being generic. Signed-off-by: Benjamin Marzinski --- - Makefile.inc | 22 +++++++++++++++++----- - 1 file changed, 17 insertions(+), 5 deletions(-) + Makefile.inc | 25 ++++++++++++++++++------- + 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/Makefile.inc b/Makefile.inc -index 540e1dfc..748911e2 100644 +index ead89030..03aee175 100644 --- a/Makefile.inc +++ b/Makefile.inc -@@ -78,11 +78,23 @@ ORIG_LDFLAGS := $(LDFLAGS) - SYSTEMD_CPPFLAGS := $(if $(SYSTEMD),-DUSE_SYSTEMD=$(SYSTEMD)) - SYSTEMD_LIBDEPS := $(if $(SYSTEMD),$(if $(shell test $(SYSTEMD) -gt 209 && echo 1),-lsystemd,-lsystemd-daemon)) +@@ -102,17 +102,29 @@ SYSTEMD_LIBDEPS := $(if $(SYSTEMD),$(if $(shell test $(SYSTEMD) -gt 209 && echo + MODPROBE_UNIT := $(shell test "0$(SYSTEMD)" -lt 245 2>/dev/null || \ + echo "modprobe@dm_multipath.service") -OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 --WARNFLAGS := -Werror -Wall -Wextra -Wformat=2 $(WFORMATOVERFLOW) -Werror=implicit-int \ +ifndef RPM_OPT_FLAGS + OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 \ + -Wall $(FORTIFY_OPT) -fexceptions -grecord-gcc-switches \ @@ -35,16 +34,29 @@ index 540e1dfc..748911e2 100644 +else + OPTFLAGS := $(RPM_OPT_FLAGS) --param=ssp-buffer-size=4 +endif -+WARNFLAGS := -Werror -Wextra -Wformat=2 $(WFORMATOVERFLOW) -Werror=implicit-int \ - -Werror=implicit-function-declaration -Werror=format-security \ -- $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) --CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) \ -+ $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) -Wstrict-prototypes -+CPPFLAGS := $(CPPFLAGS) \ - -DBIN_DIR=\"$(bindir)\" -DMULTIPATH_DIR=\"$(plugindir)\" \ - -DRUNTIME_DIR=\"$(runtimedir)\" \ - -DCONFIG_DIR=\"$(configdir)\" -DEXTRAVERSION=\"$(EXTRAVERSION)\" -MMD -MP -@@ -90,7 +102,7 @@ CFLAGS := --std=gnu99 $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe + + # Set WARN_ONLY=1 to avoid compilation erroring out due to warnings. Useful during development. + WARN_ONLY := + ERROR := $(if $(WARN_ONLY),,error=) + WERROR := $(if $(WARN_ONLY),,-Werror) +-WARNFLAGS := $(WERROR) -Wall -Wextra -Wformat=2 $(WFORMATOVERFLOW) -W$(ERROR)implicit-int \ ++WARNFLAGS := $(WERROR) -Wextra -Wformat=2 $(WFORMATOVERFLOW) -W$(ERROR)implicit-int \ + -W$(ERROR)implicit-function-declaration -W$(ERROR)format-security \ +- $(WNOCLOBBERED) -W$(ERROR)cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) ++ $(WNOCLOBBERED) -W$(ERROR)cast-qual $(ERROR_DISCARDED_QUALIFIERS) $(W_URCU_TYPE_LIMITS) -Wstrict-prototypes + +-CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) $(D_URCU_VERSION) \ ++CPPFLAGS := $(CPPFLAGS) $(D_URCU_VERSION) \ + -D_FILE_OFFSET_BITS=64 \ + -DBIN_DIR=\"$(bindir)\" -DMULTIPATH_DIR=\"$(TGTDIR)$(plugindir)\" \ + -DRUNTIME_DIR=\"$(runtimedir)\" -DCONFIG_DIR=\"$(TGTDIR)$(configdir)\" \ +@@ -121,12 +133,11 @@ CPPFLAGS := $(FORTIFY_OPT) $(CPPFLAGS) $(D_URCU_VERSION) \ + -DABSTRACT_SOCKET=\"$(abstract_socket)\" -DPATHNAME_SOCKET=\"$(pathname_socket)\" \ + -DWSTRINGOP_TRUNCATION=$(if $(WSTRINGOP_TRUNCATION),1,0) \ + -MMD -MP +-CFLAGS := -std=$(C_STD) $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe \ +- -fexceptions ++CFLAGS := -std=$(C_STD) $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe BIN_CFLAGS := -fPIE -DPIE LIB_CFLAGS := -fPIC SHARED_FLAGS := -shared diff --git a/0006-RH-add-mpathconf.patch b/0006-RH-add-mpathconf.patch index e279822..46f1126 100644 --- a/0006-RH-add-mpathconf.patch +++ b/0006-RH-add-mpathconf.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 29e5c6d6e2177e73d1be2ed2af66c1007487bf60 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 16 Oct 2014 15:49:01 -0500 Subject: [PATCH] RH: add mpathconf @@ -10,21 +10,47 @@ command line. But, mostly it is used to get a multipath.conf file with the OS defaults, and to enable and disable multipathing via a single command. +Co-authored-by: Paul Donohue Signed-off-by: Benjamin Marzinski --- - libmultipath/config.c | 2 + - multipath/Makefile | 4 + - multipath/mpathconf | 658 ++++++++++++++++++++++++++++++++++++++++++ - multipath/mpathconf.8 | 151 ++++++++++ - 4 files changed, 815 insertions(+) + .github/actions/spelling/expect.txt | 3 + + libmultipath/config.c | 2 + + multipath/Makefile | 4 + + multipath/mpathconf | 658 ++++++++++++++++++++++++++++ + multipath/mpathconf.8 | 151 +++++++ + 5 files changed, 818 insertions(+) create mode 100644 multipath/mpathconf create mode 100644 multipath/mpathconf.8 +diff --git a/.github/actions/spelling/expect.txt b/.github/actions/spelling/expect.txt +index a5856bcc..5c9113ba 100644 +--- a/.github/actions/spelling/expect.txt ++++ b/.github/actions/spelling/expect.txt +@@ -131,9 +131,11 @@ Marzinski + misdetection + mpath + mpathb ++mpathconf + mpathpersist + mpathvalid + msecs ++multipathable + multipathc + multipathd + multipathed +@@ -154,6 +156,7 @@ ontap + OOM + opensvc + OPTFLAGS ++outfile + paramp + partx + pathgroup diff --git a/libmultipath/config.c b/libmultipath/config.c -index 183b319d..01f36a4f 100644 +index b8317f4d..0bbaa981 100644 --- a/libmultipath/config.c +++ b/libmultipath/config.c -@@ -968,6 +968,8 @@ int _init_config (const char *file, struct config *conf) +@@ -939,6 +939,8 @@ int init_config__ (const char *file, struct config *conf) validate_pctable(conf->overrides, 0, file); } else { condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); @@ -34,42 +60,43 @@ index 183b319d..01f36a4f 100644 conf->blist_devnode = vector_alloc(); if (!conf->blist_devnode) { diff --git a/multipath/Makefile b/multipath/Makefile -index b3c2cc81..413294ef 100644 +index 2ea9e528..3dc241cc 100644 --- a/multipath/Makefile +++ b/multipath/Makefile -@@ -22,6 +22,7 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so +@@ -24,6 +24,7 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so install: $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) - $(Q)$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)$(udevrulesdir)/62-multipath.rules -@@ -31,6 +32,7 @@ install: + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) +@@ -32,6 +33,7 @@ install: $(Q)$(INSTALL_PROGRAM) -m 644 tmpfiles.conf $(DESTDIR)$(tmpfilesdir)/multipath.conf $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man8 $(Q)$(INSTALL_PROGRAM) -m 644 $(EXEC).8 $(DESTDIR)$(mandir)/man8 + $(Q)$(INSTALL_PROGRAM) -m 644 mpathconf.8 $(DESTDIR)$(mandir)/man8 $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)/man5 $(Q)$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5 $(DESTDIR)$(mandir)/man5 - ifneq ($(SCSI_DH_MODULES_PRELOAD),) -@@ -41,11 +43,13 @@ endif + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(modulesloaddir) +@@ -46,12 +48,14 @@ endif uninstall: $(Q)$(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(Q)$(RM) $(DESTDIR)$(bindir)/mpathconf $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/scsi_dh.conf $(Q)$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules $(Q)$(RM) $(DESTDIR)$(mandir)/man8/$(EXEC).8 + $(Q)$(RM) $(DESTDIR)$(mandir)/man8/mpathconf.8 $(Q)$(RM) $(DESTDIR)$(mandir)/man5/$(EXEC).conf.5 + $(Q)$(RM) $(DESTDIR)$(tmpfilesdir)/multipath.conf - clean: dep_clean diff --git a/multipath/mpathconf b/multipath/mpathconf new file mode 100644 -index 00000000..319664b1 +index 00000000..ce430075 --- /dev/null +++ b/multipath/mpathconf @@ -0,0 +1,658 @@ @@ -106,7 +133,7 @@ index 00000000..319664b1 + +defaults { + user_friendly_names yes -+ find_multipaths yes ++ find_multipaths on +}" + +CONFIGFILE="/etc/multipath.conf" @@ -124,7 +151,7 @@ index 00000000..319664b1 + echo "Disable: --disable" + echo "Only allow certain wwids (instead of enable): --allow " + echo "Set user_friendly_names (Default y): --user_friendly_names " -+ echo "Set find_multipaths (Default y): --find_multipaths " ++ echo "Set find_multipaths (Default on): --find_multipaths " + echo "Set default property blacklist (Default n): --property_blacklist " + echo "Set enable_foreign to show foreign devices (Default n): --enable_foreign " + echo "Set recheck_wwid (Defaut n): --recheck_wwid " @@ -328,11 +355,11 @@ index 00000000..319664b1 + exit 1 + fi + if [ "$FIND" = "y" ]; then -+ FIND="yes" ++ FIND="on" + elif [ "$FIND" = "n" ]; then -+ FIND="no" -+ elif [ -n "$FIND" ] && [ "$FIND" != "yes" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then -+ echo "--find_multipaths must be one of 'yes' 'no' 'strict' 'greedy' or 'smart'" ++ FIND="off" ++ elif [ -n "$FIND" ] && [ "$FIND" != "on" -a "$FIND" != "yes" -a "$FIND" != "off" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then ++ echo "--find_multipaths must be one of 'on' 'yes' 'y' 'off' 'no' 'n' 'strict' 'greedy' or 'smart'" + exit 1 + fi + if [ -n "$PROPERTY" ] && [ "$PROPERTY" != "y" -a "$PROPERTY" != "n" ]; then @@ -497,7 +524,7 @@ index 00000000..319664b1 + echo "multipath is disabled" + fi + if [ -z "$HAVE_FIND" ]; then -+ echo "find_multipaths is no" ++ echo "find_multipaths is off" + else + echo "find_multipaths is $HAVE_FIND" + fi @@ -733,7 +760,7 @@ index 00000000..319664b1 +fi diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8 new file mode 100644 -index 00000000..9c2fb835 +index 00000000..ec4e5c56 --- /dev/null +++ b/multipath/mpathconf.8 @@ -0,0 +1,151 @@ @@ -779,10 +806,10 @@ index 00000000..9c2fb835 +.B user_friendly_names +set and +.B find_multipaths -+set to \fByes\fP. To disable these, use the ++set to \fBon\fP. To disable these, use the +.B --user_friendly_names n +and -+.B --find_multipaths n ++.B --find_multipaths off +options +.SH COMMANDS +.TP @@ -825,7 +852,7 @@ index 00000000..9c2fb835 +sets an existing \fBrecheck_wwid\fP line to \fBno\fP. This command can be used +along with any other command. +.TP -+.B --find_multipaths\fP { \fByes\fP | \fBno\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP } ++.B --find_multipaths\fP { \fBon\fP | \fByes\fP | \fBy\fP | \fBoff\fP | \fBno\fP | \fBn\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP } +If set to \fB\fP, this adds the line +.B find_multipaths +to the @@ -875,7 +902,7 @@ index 00000000..9c2fb835 +.B service multipathd stop +to stop the multipathd daemon on \fB--disable\fP, and +.B service multipathd reload -+to reconfigure multipathd on \fB--user_frindly_names\fP and ++to reconfigure multipathd on \fB--user_friendly_names\fP and +\fB--find_multipaths\fP. +This option is set to \fBn\fP by default. +.SH FILES diff --git a/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch b/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch index 714a1bb..cef8b56 100644 --- a/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch +++ b/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From d6ad888bad3850bb0a342ebcdc9fd78773eb3b2a Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 17 Oct 2014 11:20:34 -0500 Subject: [PATCH] RH: add wwids from kernel cmdline mpath.wwids with -A @@ -14,16 +14,16 @@ multipathd.service Signed-off-by: Benjamin Marzinski --- - multipath/main.c | 54 +++++++++++++++++++++++++++++++++-- - multipath/multipath.8 | 7 ++++- - multipathd/multipathd.service | 1 + + multipath/main.c | 54 ++++++++++++++++++++++++++++++-- + multipath/multipath.8.in | 7 ++++- + multipathd/multipathd.service.in | 1 + 3 files changed, 59 insertions(+), 3 deletions(-) diff --git a/multipath/main.c b/multipath/main.c -index 90f940f1..3549740a 100644 +index 31012874..a667c2ee 100644 --- a/multipath/main.c +++ b/multipath/main.c -@@ -120,7 +120,7 @@ usage (char * progname) +@@ -111,7 +111,7 @@ usage (char * progname) fprintf (stderr, " %s [-v level] [-R retries] -F\n", progname); fprintf (stderr, " %s [-v level] [-l|-ll] [device]\n", progname); fprintf (stderr, " %s [-v level] [-a|-w] device\n", progname); @@ -32,7 +32,7 @@ index 90f940f1..3549740a 100644 fprintf (stderr, " %s [-v level] [-i] [-c|-C] device\n", progname); fprintf (stderr, " %s [-v level] [-i] [-u|-U]\n", progname); fprintf (stderr, " %s [-h|-t|-T]\n", progname); -@@ -134,6 +134,8 @@ usage (char * progname) +@@ -125,6 +125,8 @@ usage (char * progname) " -f flush a multipath device map\n" " -F flush all multipath device maps\n" " -a add a device wwid to the wwids file\n" @@ -41,7 +41,7 @@ index 90f940f1..3549740a 100644 " -c check if a device should be a path in a multipath device\n" " -C check if a multipath device has usable paths\n" " -q allow queue_if_no_path when multipathd is not running\n" -@@ -447,6 +449,50 @@ static void cleanup_vecs(void) +@@ -440,6 +442,50 @@ static void cleanup_vecs(void) free_pathvec(vecs.pathvec, FREE_PATHS); } @@ -92,16 +92,16 @@ index 90f940f1..3549740a 100644 static int configure (struct config *conf, enum mpath_cmds cmd, enum devtypes dev_type, char *devpath) -@@ -842,7 +888,7 @@ main (int argc, char *argv[]) - conf->force_sync = 1; - if (atexit(cleanup_vecs)) +@@ -851,7 +897,7 @@ main (int argc, char *argv[]) condlog(1, "failed to register cleanup handler for vecs: %m"); + if (atexit(cleanup_bindings)) + condlog(1, "failed to register cleanup handler for bindings: %m"); - while ((arg = getopt(argc, argv, ":adDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { + while ((arg = getopt(argc, argv, ":aAdDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { switch(arg) { case 'v': if (!isdigit(optarg[0])) { -@@ -913,6 +959,10 @@ main (int argc, char *argv[]) +@@ -922,6 +968,10 @@ main (int argc, char *argv[]) case 'T': cmd = CMD_DUMP_CONFIG; break; @@ -112,11 +112,11 @@ index 90f940f1..3549740a 100644 case 'h': usage(argv[0]); exit(RTVL_OK); -diff --git a/multipath/multipath.8 b/multipath/multipath.8 -index 88149d53..072a03ee 100644 ---- a/multipath/multipath.8 -+++ b/multipath/multipath.8 -@@ -63,7 +63,7 @@ multipath \- Device mapper target autoconfig. +diff --git a/multipath/multipath.8.in b/multipath/multipath.8.in +index b88e9a4c..edd742aa 100644 +--- a/multipath/multipath.8.in ++++ b/multipath/multipath.8.in +@@ -64,7 +64,7 @@ multipath \- Device mapper target autoconfig. .B multipath .RB [\| \-v\ \c .IR level \|] @@ -125,7 +125,7 @@ index 88149d53..072a03ee 100644 . .LP .B multipath -@@ -145,6 +145,11 @@ device mapper, path checkers ...). +@@ -146,6 +146,11 @@ device mapper, path checkers ...). Add the WWID for the specified device to the WWIDs file. . .TP @@ -137,15 +137,15 @@ index 88149d53..072a03ee 100644 .B \-w Remove the WWID for the specified device from the WWIDs file. . -diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service -index 311f49c7..5324f4bc 100644 ---- a/multipathd/multipathd.service -+++ b/multipathd/multipathd.service -@@ -17,6 +17,7 @@ ConditionVirtualization=!container +diff --git a/multipathd/multipathd.service.in b/multipathd/multipathd.service.in +index ab166435..1ec08c6e 100644 +--- a/multipathd/multipathd.service.in ++++ b/multipathd/multipathd.service.in +@@ -19,6 +19,7 @@ StartLimitBurst=3 [Service] Type=notify NotifyAccess=main -+ExecStartPre=-/sbin/multipath -A - ExecStart=/sbin/multipathd -d -s - ExecReload=/sbin/multipathd reconfigure - TasksMax=infinity ++ExecStartPre=-@BINDIR@/multipath -A + ExecStart=@BINDIR@/multipathd -d -s + ExecReload=@BINDIR@/multipathd reconfigure + Restart=on-failure diff --git a/0008-RH-reset-default-find_mutipaths-value-to-off.patch b/0008-RH-reset-default-find_mutipaths-value-to-off.patch index ea12464..fdc90d4 100644 --- a/0008-RH-reset-default-find_mutipaths-value-to-off.patch +++ b/0008-RH-reset-default-find_mutipaths-value-to-off.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 064d761121e7e2c7b63ab280e341d8010a413119 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 7 Jun 2018 17:43:52 -0500 Subject: [PATCH] RH: reset default find_mutipaths value to off @@ -6,16 +6,18 @@ Subject: [PATCH] RH: reset default find_mutipaths value to off Upstream has changed to default find_multipaths to "strict". For now Redhat will retain the previous default of "off". +Co-authored-by: Paul Donohue Signed-off-by: Benjamin Marzinski --- - libmultipath/defaults.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) + libmultipath/defaults.h | 2 +- + multipath/multipath.conf.5.in | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h -index a5e9ea0c..514fd880 100644 +index 134b690a..e2fe7ac4 100644 --- a/libmultipath/defaults.h +++ b/libmultipath/defaults.h -@@ -23,7 +23,7 @@ +@@ -24,7 +24,7 @@ #define DEFAULT_NO_PATH_RETRY NO_PATH_RETRY_UNDEF #define DEFAULT_VERBOSITY 2 #define DEFAULT_REASSIGN_MAPS 0 @@ -24,3 +26,16 @@ index a5e9ea0c..514fd880 100644 #define DEFAULT_FAST_IO_FAIL 5 #define DEFAULT_DEV_LOSS_TMO 600 #define DEFAULT_RETAIN_HWHANDLER RETAIN_HWHANDLER_ON +diff --git a/multipath/multipath.conf.5.in b/multipath/multipath.conf.5.in +index ba291e11..b8389db3 100644 +--- a/multipath/multipath.conf.5.in ++++ b/multipath/multipath.conf.5.in +@@ -1227,7 +1227,7 @@ as non-multipath and passed on to upper layers. + \fBNote:\fR this may cause delays during device detection if + there are single-path devices which aren\'t blacklisted. + .TP +-The default is: \fBstrict\fR ++The default is: \fBoff\fR + .RE + . + . diff --git a/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch b/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch index 06233ff..8065e9f 100644 --- a/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch +++ b/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 335b8eb2773b07a602e84e14c1f3e289a9b25b5a Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 11 Apr 2019 13:25:42 -0500 Subject: [PATCH] RH: attempt to get ANA info via sysfs first @@ -13,10 +13,10 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/libmultipath/prioritizers/ana.c b/libmultipath/prioritizers/ana.c -index b5c7873d..e139360c 100644 +index 34527b22..4eaa3cc3 100644 --- a/libmultipath/prioritizers/ana.c +++ b/libmultipath/prioritizers/ana.c -@@ -24,6 +24,7 @@ +@@ -23,6 +23,7 @@ #include "prio.h" #include "util.h" #include "structs.h" @@ -24,7 +24,7 @@ index b5c7873d..e139360c 100644 enum { ANA_ERR_GETCTRL_FAILED = 1, -@@ -36,6 +37,7 @@ enum { +@@ -35,6 +36,7 @@ enum { ANA_ERR_GETNS_FAILED, ANA_ERR_NO_MEMORY, ANA_ERR_NO_INFORMATION, @@ -32,7 +32,7 @@ index b5c7873d..e139360c 100644 }; static const char *ana_errmsg[] = { -@@ -49,6 +51,7 @@ static const char *ana_errmsg[] = { +@@ -48,6 +50,7 @@ static const char *ana_errmsg[] = { [ANA_ERR_GETNS_FAILED] = "couldn't get namespace info", [ANA_ERR_NO_MEMORY] = "out of memory", [ANA_ERR_NO_INFORMATION] = "invalid fd", @@ -40,7 +40,7 @@ index b5c7873d..e139360c 100644 }; static const char *anas_string[] = { -@@ -107,6 +110,27 @@ static int get_ana_state(__u32 nsid, __u32 anagrpid, void *ana_log, +@@ -106,6 +109,27 @@ static int get_ana_state(__u32 nsid, __u32 anagrpid, void *ana_log, return -ANA_ERR_GETANAS_NOTFOUND; } @@ -68,7 +68,7 @@ index b5c7873d..e139360c 100644 static int get_ana_info(struct path * pp) { int rc; -@@ -210,8 +234,11 @@ int getprio(struct path *pp, __attribute__((unused)) char *args, +@@ -208,8 +232,11 @@ int getprio(struct path *pp, __attribute__((unused)) char *args) if (pp->fd < 0) rc = -ANA_ERR_NO_INFORMATION; diff --git a/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch b/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch index 4e0b116..f7bca92 100644 --- a/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch +++ b/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 137c96d16b6bb03d8a52854e152db4ee36b7d9e4 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 25 Mar 2021 13:05:10 -0500 Subject: [PATCH] RH: make parse_vpd_pg83 match scsi_id output @@ -14,10 +14,10 @@ Signed-off-by: Benjamin Marzinski 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c -index 6865cd92..72825829 100644 +index 31db8758..21cfcc73 100644 --- a/libmultipath/discovery.c +++ b/libmultipath/discovery.c -@@ -1177,13 +1177,9 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, +@@ -1225,13 +1225,9 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, good_len = 8; break; case 2: @@ -33,7 +33,7 @@ index 6865cd92..72825829 100644 good_len = 8; break; default: -@@ -1201,10 +1197,6 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, +@@ -1249,10 +1245,6 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, break; case 0x8: /* SCSI Name: Prio 3 */ @@ -45,10 +45,10 @@ index 6865cd92..72825829 100644 case 0x1: /* T-10 Vendor ID: Prio 2 */ diff --git a/tests/vpd.c b/tests/vpd.c -index 1b2d62d6..7309b5c5 100644 +index e3212e61..cdb111bb 100644 --- a/tests/vpd.c +++ b/tests/vpd.c -@@ -231,11 +231,13 @@ static const char * const str_prefix[] = { +@@ -232,11 +232,13 @@ static const char * const str_prefix[] = { [STR_IQN] = "iqn.", }; @@ -62,7 +62,7 @@ index 1b2d62d6..7309b5c5 100644 /** * create_scsi_string_desc() - create a SCSI name string descriptor. -@@ -766,6 +768,7 @@ make_test_vpd_naa(2, 18); +@@ -767,6 +769,7 @@ make_test_vpd_naa(2, 18); make_test_vpd_naa(2, 17); make_test_vpd_naa(2, 16); @@ -70,7 +70,7 @@ index 1b2d62d6..7309b5c5 100644 /* SCSI Name string: EUI64, WWID size: 17 */ make_test_vpd_str(0, 20, 18) make_test_vpd_str(0, 20, 17) -@@ -801,6 +804,7 @@ make_test_vpd_str(18, 20, 18) +@@ -802,6 +805,7 @@ make_test_vpd_str(18, 20, 18) make_test_vpd_str(18, 20, 17) make_test_vpd_str(18, 20, 16) make_test_vpd_str(18, 20, 15) @@ -78,7 +78,7 @@ index 1b2d62d6..7309b5c5 100644 static int test_vpd(void) { -@@ -909,6 +913,7 @@ static int test_vpd(void) +@@ -910,6 +914,7 @@ static int test_vpd(void) cmocka_unit_test(test_vpd_naa_2_18), cmocka_unit_test(test_vpd_naa_2_17), cmocka_unit_test(test_vpd_naa_2_16), @@ -86,7 +86,7 @@ index 1b2d62d6..7309b5c5 100644 cmocka_unit_test(test_vpd_str_0_20_18), cmocka_unit_test(test_vpd_str_0_20_17), cmocka_unit_test(test_vpd_str_0_20_16), -@@ -933,6 +938,7 @@ static int test_vpd(void) +@@ -934,6 +939,7 @@ static int test_vpd(void) cmocka_unit_test(test_vpd_str_18_20_17), cmocka_unit_test(test_vpd_str_18_20_16), cmocka_unit_test(test_vpd_str_18_20_15), diff --git a/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch b/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch index 26b0d06..3fe7c25 100644 --- a/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch +++ b/0011-RH-add-scsi-device-handlers-to-modules-load.d.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 374755791536be4870ab2e93ae36549cbaaeb800 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Fri, 25 Mar 2022 18:12:06 -0500 Subject: [PATCH] RH: add scsi device handlers to modules-load.d @@ -11,7 +11,7 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile.inc b/Makefile.inc -index 748911e2..c07bcb0c 100644 +index 03aee175..936a622f 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -16,7 +16,7 @@ READLINE := diff --git a/0012-RH-compile-with-libreadline-support.patch b/0012-RH-compile-with-libreadline-support.patch index df99295..0964c42 100644 --- a/0012-RH-compile-with-libreadline-support.patch +++ b/0012-RH-compile-with-libreadline-support.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From cc15379130e8aa068e97c64afd46be212b456d4f Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 15 Nov 2022 18:03:33 -0600 Subject: [PATCH] RH: compile with libreadline support @@ -12,7 +12,7 @@ Signed-off-by: Benjamin Marzinski 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile.inc b/Makefile.inc -index c07bcb0c..e59313c6 100644 +index 936a622f..f475f70f 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -12,7 +12,7 @@ diff --git a/0013-RH-Add-mpathcleanup.patch b/0013-RH-Add-mpathcleanup.patch new file mode 100644 index 0000000..d1a8e84 --- /dev/null +++ b/0013-RH-Add-mpathcleanup.patch @@ -0,0 +1,186 @@ +From 2ef5bd86052ba0b22f4d3a16e69cdf268d90a53a Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 7 Jul 2023 15:25:59 -0500 +Subject: [PATCH] RH: Add mpathcleanup + +mpathcleanup is a program that will remove a multipath device as well as +all of the scsi path devices that make it up. + +Signed-off-by: Benjamin Marzinski +--- + multipath/Makefile | 2 + + multipath/mpathcleanup | 145 +++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 147 insertions(+) + create mode 100755 multipath/mpathcleanup + +diff --git a/multipath/Makefile b/multipath/Makefile +index 3dc241cc..47e82234 100644 +--- a/multipath/Makefile ++++ b/multipath/Makefile +@@ -25,6 +25,7 @@ install: + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) + $(Q)$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ ++ $(Q)$(INSTALL_PROGRAM) -m 755 mpathcleanup $(DESTDIR)$(bindir)/ + $(Q)$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) + $(Q)$(INSTALL_PROGRAM) -m 644 99-z-dm-mpath-late.rules $(DESTDIR)$(udevrulesdir) +@@ -49,6 +50,7 @@ endif + uninstall: + $(Q)$(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(Q)$(RM) $(DESTDIR)$(bindir)/mpathconf ++ $(Q)$(RM) $(DESTDIR)$(bindir)/mpathcleanup + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(Q)$(RM) $(DESTDIR)$(udevrulesdir)/99-z-dm-mpath-late.rules + $(Q)$(RM) $(DESTDIR)$(modulesloaddir)/multipath.conf +diff --git a/multipath/mpathcleanup b/multipath/mpathcleanup +new file mode 100755 +index 00000000..6fd921e4 +--- /dev/null ++++ b/multipath/mpathcleanup +@@ -0,0 +1,145 @@ ++#!/bin/bash ++# ++# Copyright (C) 2023 Red Hat, Inc. All rights reserved. ++# ++# This file is part of the device-mapper-multipath package. ++# ++# This copyrighted material is made available to anyone wishing to use, ++# modify, copy, or redistribute it subject to the terms and conditions ++# of the GNU General Public License v.2. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software Foundation, ++# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++unset PROGRAM FLUSH DEVICE DEVNAME MAJOR MINOR PATHDEVS PATHDEV HAVE_MULTIPATHD QUEUEING ++ ++function usage ++{ ++ echo "usage: $PROGRAM [-h] [--flush] " ++ echo "" ++ echo "remove a multipath device and its scsi path devices" ++ echo "" ++ echo "options:" ++ echo " -h, --help show this help message and exit" ++ echo " --flush disable queuing on the multipath device and" ++ echo " flush the path devices before removing" ++} ++ ++function parse_args ++{ ++ while [ -n "$1" ]; do ++ case $1 in ++ --flush) ++ FLUSH=1 ++ shift ++ ;; ++ --help | -h) ++ usage ++ exit 1 ++ ;; ++ *) ++ if [ -n "$DEVICE" ]; then ++ usage ++ exit 1 ++ fi ++ DEVICE=$1 ++ shift ++ ;; ++ esac ++ done ++} ++ ++function validate_device ++{ ++ if [ -z "$DEVICE" ]; then ++ usage ++ exit 1 ++ fi ++ if [[ "$DEVICE" =~ ^[[:digit:]]+:[[:digit:]]+$ ]]; then ++ MAJOR=${DEVICE%%:*} ++ MINOR=${DEVICE##*:} ++ DEVNAME=`dmsetup ls --target multipath | grep "($MAJOR, $MINOR)$" | awk '{print $1}'` ++ else ++ DEVNAME=`dmsetup ls --target multipath | awk '{print $1}' | grep "^$DEVICE$"` ++ fi ++ if [ -z "$DEVNAME" ]; then ++ DEVNAME=`multipath -v 1 -l $DEVICE 2>/dev/null` ++ if [ -z "$DEVNAME" ]; then ++ echo "$DEVICE is not a multipath device" ++ exit 1 ++ fi ++ # verify that this is not a native nvme multipath device ++ dmsetup ls --target multipath | awk '{print $1}' | grep -q "^$DEVNAME$" ++ if test $? -eq 1; then ++ echo "$DEVICE is not a device-mapper multipath device" ++ exit 1 ++ fi ++ fi ++ if [ -z "$MINOR" ]; then ++ MINOR=`dmsetup info -c --noheadings -o minor $DEVNAME` ++ fi ++} ++ ++function get_paths ++{ ++ PATHDEVS=`ls /sys/block/dm-$MINOR/slaves` ++ for PATHDEV in $PATHDEVS; do ++ if [[ ! "$PATHDEV" =~ ^sd[a-z]+$ ]]; then ++ echo "$PATHDEV is not a scsi device. $PROGRAM only works with scsi devices" ++ exit 1 ++ fi ++ done ++} ++ ++function remove_devs ++{ ++ pidof multipathd > /dev/null ++ HAVE_MULTIPATHD=$? ++ multipath -v2 -l "$DEVNAME" | grep features | grep -q queue_if_no_path ++ QUEUEING=$? ++ if [ -n "$FLUSH" ] && [ "$QUEUEING" -eq 0 ]; then ++ if test $HAVE_MULTIPATHD -eq 0; then ++ multipathd disablequeueing map "$DEVNAME" > /dev/null ++ else ++ dmsetup message "$DEVNAME" 0 fail_if_no_path ++ fi ++ sleep 1 ++ fi ++ if test $HAVE_MULTIPATHD -eq 0; then ++ multipath -f "$DEVNAME" ++ else ++ multipathd -Df "$DEVNAME" ++ fi ++ if test $? -eq 1; then ++ echo "$DEVICE cannot be removed" ++ exit 1 ++ fi ++ for PATHDEV in $PATHDEVS; do ++ if [ -n "$FLUSH" ]; then ++ blockdev --flushbufs /dev/"$PATHDEV" ++ fi ++ echo 1 > /sys/block/"$PATHDEV"/device/delete ++ done ++} ++ ++function verify_removal ++{ ++ multipath -v 1 -d $DEVNAME | grep -q "^$DEVNAME$" ++ if test $? -eq 0; then ++ echo "$DEVICE removed but path devices still exist" ++ exit 1 ++ fi ++ multipath -v 1 -l $DEVNAME | grep -q "^$DEVNAME$" ++ if test $? -eq 0; then ++ echo "$DEVICE removal succeeded, but device still exists" ++ exit 1 ++ fi ++} ++ ++PROGRAM="$0" ++parse_args "$@" ++validate_device ++get_paths ++remove_devs ++verify_removal diff --git a/device-mapper-multipath.spec b/device-mapper-multipath.spec index 268e4b9..5d80d4e 100644 --- a/device-mapper-multipath.spec +++ b/device-mapper-multipath.spec @@ -1,14 +1,15 @@ Name: device-mapper-multipath -Version: 0.9.5 +Version: 0.13.0 Release: 2%{?dist} Summary: Tools to manage multipath devices using device-mapper -License: GPLv2 +# readline uses GPL-3.0-only +License: GPL-2.0-only AND GPL-3.0-only URL: http://christophe.varoqui.free.fr/ # The source for this package was pulled from upstream's git repo. Use the # following command to generate the tarball -# curl -L https://github.com/opensvc/multipath-tools/archive/0.9.5.tar.gz -o multipath-tools-0.9.5.tgz -Source0: multipath-tools-0.9.5.tgz +# curl -L https://github.com/opensvc/multipath-tools/archive/0.13.0.tar.gz -o multipath-tools-0.13.0.tgz +Source0: multipath-tools-0.13.0.tgz Source1: multipath.conf Patch0001: 0001-RH-fixup-udev-rules-for-redhat.patch Patch0002: 0002-RH-Remove-the-property-blacklist-exception-builtin.patch @@ -22,6 +23,7 @@ Patch0009: 0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch Patch0010: 0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch Patch0011: 0011-RH-add-scsi-device-handlers-to-modules-load.d.patch Patch0012: 0012-RH-compile-with-libreadline-support.patch +Patch0013: 0013-RH-Add-mpathcleanup.patch # runtime Requires: %{name}-libs = %{version}-%{release} @@ -63,8 +65,8 @@ The tools are : %package libs Summary: The %{name} modules and shared library -# only libmpathcmd is LGPLv2+ -License: GPLv2 and LGPLv2+ +# only libmpathcmd is LGPL-2.1-or-later AND LGPL-2.0-or-later +License: GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.0-or-later %description libs The %{name}-libs provides the path checker @@ -89,7 +91,8 @@ kpartx manages partition creation and removal for device-mapper devices. %package -n libdmmp Summary: device-mapper-multipath C API library -License: GPLv3+ +# Automatically converted from old format: GPLv3+ - review is highly recommended. +License: GPL-3.0-or-later Requires: json-c Requires: %{name} = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} @@ -108,11 +111,10 @@ This package contains the files needed to develop applications that use device-mapper-multipath's libdmmp C API library %prep -%autosetup -n multipath-tools-0.9.5 -p1 +%autosetup -n multipath-tools-0.13.0 -p1 cp %{SOURCE1} . %build -%define _sbindir /usr/sbin %define _libdir /usr/%{_lib} %define _libmpathdir %{_libdir}/multipath %define _pkgconfdir %{_libdir}/pkgconfig @@ -143,7 +145,7 @@ rm -rf %{buildroot}/%{_initrddir} %postun if [ $1 -ge 1 ] ; then - /sbin/multipathd forcequeueing daemon > /dev/null 2>&1 || : + multipathd forcequeueing daemon > /dev/null 2>&1 || : fi %systemd_postun_with_restart multipathd.service @@ -158,8 +160,10 @@ fi %{_sbindir}/multipathd %{_sbindir}/multipathc %{_sbindir}/mpathconf +%{_sbindir}/mpathcleanup %{_sbindir}/mpathpersist %{_unitdir}/multipathd.service +%{_unitdir}/multipathd-queueing.service %{_unitdir}/multipathd.socket %{_mandir}/man5/multipath.conf.5* %{_mandir}/man8/multipath.8* @@ -169,9 +173,9 @@ fi %{_mandir}/man8/mpathpersist.8* %config /usr/lib/udev/rules.d/62-multipath.rules %config /usr/lib/udev/rules.d/11-dm-mpath.rules -%dir /usr/lib/modules-load.d -/usr/lib/modules-load.d/multipath.conf -/usr/lib/modules-load.d/scsi_dh.conf +%config /usr/lib/udev/rules.d/99-z-dm-mpath-late.rules +%dir %{_modulesloaddir} +%{_modulesloaddir}/scsi_dh.conf %{_tmpfilesdir}/multipath.conf %doc README.md %doc multipath.conf @@ -230,6 +234,115 @@ fi %{_pkgconfdir}/libdmmp.pc %changelog +* Thu Nov 13 2025 Benjamin Marzinski - 0.13.0-2 +- Move STI tests to TMT + +* Tue Nov 4 2025 Benjamin Marzinski - 0.13.0-1 +- Update source to upstream release 0.13.0 + * Previous patches 0001-0004 are included in the tarball +- Install /lib/systemd/system/multipathd-queueing.service +- Rename redhat patches + * Previous patches 0005-0017 are now patches 0001-0013 + +* Wed Jul 23 2025 Fedora Release Engineering - 0.11.1-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild + +* Thu Feb 27 2025 Benjamin Marzinski - 0.11.1-1 +- Update source to upstream staging branch for 0.11.1 plus additional + stable branch patches. + * Previous patches 0001-0032 are included in the tarball +- Rename redhat patches + * Previous patches 0033-0045 are now patches 0005-0017 + +* Sat Feb 1 2025 Benjamin Marzinski - 0.10.0-5 +- Update source to upstream staging branch for 0.10.y (will be 0.10.2 when + merged). +- Rebase redhat patches + +* Thu Jan 16 2025 Fedora Release Engineering - 0.10.0-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild + +* Sun Jan 12 2025 Zbigniew Jędrzejewski-Szmek - 0.10.0-3 +- Rebuilt for the bin-sbin merge (2nd attempt) + +* Thu Aug 29 2024 Benjamin Marzinski - 0.10.0-2 +- update CI tests. + +* Thu Aug 29 2024 Benjamin Marzinski - 0.10.0-1 +- Update source to upstream version 0.9.9 + * Previous patch 0014-multipathd-fix-flush-check-in-flush_map.patch is + included in the source tarball +- Rebase redhat patches + +* Fri Aug 9 2024 Benjamin Marzinski - 0.9.9-6 +- Add 0014-multipathd-fix-null-pointer-dereference-in-uev_updat.patch + * multipath features tracking on failed removes + +* Mon Jul 29 2024 Miroslav Suchý - 0.9.9-5 +- convert license to SPDX + +* Thu Jul 25 2024 Miroslav Suchý - 0.9.9-4 +- convert license to SPDX + +* Wed Jul 17 2024 Fedora Release Engineering - 0.9.9-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild + +* Tue Jul 09 2024 Zbigniew Jędrzejewski-Szmek - 0.9.9-2 +- Rebuilt for the bin-sbin merge + +* Thu Jun 13 2024 Benjamin Marzinski - 0.9.9-1 +- Update source to upstream version 0.9.9 + * Previous patches 0001-0044 are included in the source tarball +- Rename redhat patches + * Previous patches 0045-0057 are now patches 0001-0013 + +* Mon May 20 2024 Benjamin Marzinski - 0.9.8-1 +- Update source to upstream version 0.9.8 plus latest staging branch + * Previous patches 0014 & 0015 are included in the source tarball + * patches 0001-0044 are from the upstream staging branch +- Rename redhat patches + * Previous patches 0001-0013 are now patches 0045-0057 +- Install /lib/udev/rules.d/99-z-dm-mpath-late.rules + +* Wed Jan 24 2024 Fedora Release Engineering - 0.9.7-7 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild + +* Fri Jan 19 2024 Fedora Release Engineering - 0.9.7-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild + +* Tue Jan 16 2024 Benjamin Marzinski - 0.9.7-5 +- Add 0014-multipathd-fix-null-pointer-dereference-in-uev_updat.patch + * Fix auto_resize code to avoid a segfault +- Add 0015-multipathd-fix-auto-resize-configuration.patch + * Fix auto_resize default value + +* Thu Nov 30 2023 Benjamin Marzinski - 0.9.7-4 +- Use modulesloaddir macro for installing scsi_dh.conf + +* Wed Nov 29 2023 Benjamin Marzinski - 0.9.7-3 +- Fix multipath_conf_syntax test +- Fix restate_module test + +* Tue Nov 28 2023 Paul Donohue - 0.9.7-2 +- Modify 0006-RH-add-mpathconf.patch +- Modify 0008-RH-reset-default-find_mutipaths-value-to-off.patch + * Fix find_multipaths values in docs and mpathconf + +* Tue Nov 21 2023 Benjamin Marzinski - 0.9.7-1 +- Update source to upstream version 0.9.7 + * Previous patches 0001-0040 are included in the source tarball +- Rename redhat patches + * Previous patches 0041-0053 are now patches 0001-0013 +- Remove /usr/lib/modules-load.d/multipath.conf + * has been replaced with modprobe@dm_multipath.service unit Wants. + +* Fri Sep 22 2023 Benjamin Marzinski - 0.9.6-1 +- Update to the head of the upstream staging branch +- Rename redhat patches + * Previous patches 0001-0012 are now patches 0041-0052 +- Add 0053-RH-Add-mpathcleanup.patch + * add mpathcleanup program + * Wed Jul 19 2023 Fedora Release Engineering - 0.9.5-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild diff --git a/plans/multipath.fmf b/plans/multipath.fmf new file mode 100644 index 0000000..876c77a --- /dev/null +++ b/plans/multipath.fmf @@ -0,0 +1,58 @@ +summary: basic functionality tests + +provision: + hardware: + memory: ">= 2 GB" + +prepare: + how: install + package: + - device-mapper-multipath + - perl + +discover: + how: shell + tests: + - name: medium_error_scsi_debug + path: /tests/medium_error_scsi_debug + test: ./main.sh + duration: 15m + - name: squelch_scsi_id + path: /tests/squelch_scsi_id + test: ./main.sh + duration: 15m + - name: multipathd_oom + path: /tests/multipathd_oom + test: ./main.sh + duration: 15m + - name: user_friendly_names + path: /tests/user_friendly_names + test: ./main.sh + duration: 15m + - name: kpartx_4k_aligned + path: /tests/kpartx_4k_aligned + test: ./main.sh + duration: 15m + - name: bindings + path: /tests/bindings + test: ./main.sh + duration: 15m + - name: restate_module + path: /tests/restate_module + test: ./main.sh + duration: 15m + - name: find_multipaths + path: /tests/find_multipaths + test: ./main.sh + duration: 15m + - name: multipath_conf_syntax + path: /tests/multipath_conf_syntax + test: ./main.sh + duration: 15m + - name: alias_clash + path: /tests/alias_clash + test: ./main.sh + duration: 15m + +execute: + how: tmt diff --git a/sources b/sources index ece6ffe..233c4ea 100644 --- a/sources +++ b/sources @@ -1,2 +1,2 @@ -SHA512 (multipath-tools-0.9.5.tgz) = 39c2e5d45542c6076eb3b17b9994629b4c1f74347aa43e0119001fa2d07d3a606fd5e617962906a11b313afb37a115bd8eec2ef24447e980e61b5900625f9146 +SHA512 (multipath-tools-0.13.0.tgz) = 75c84524ee27590b8b751ea500898a44e5ac3d58d55be6bcab919d0d423049db3a4466fcb9135705cf63ba074416973bb651255063269e9f682f11d21ba57e59 SHA512 (multipath.conf) = 71953dce5a68adcf60a942305f5a66023e6f4c4baf53b1bfdb4edf65ed5b8e03db804363c36d1dcfd85591f4766f52b515269904c53b84d7b076da0b80b09942 diff --git a/tests/bindings/main.sh b/tests/bindings/main.sh index 2d6f284..76292e4 100755 --- a/tests/bindings/main.sh +++ b/tests/bindings/main.sh @@ -18,40 +18,110 @@ # Author: Lin Li #set -x -source ../include/ec.sh || exit 200 - +source ../include/tc.sh || exit 200 tlog "running $0" -trun "service multipathd stop" -rpm -q device-mapper-multipath || yum install -y device-mapper-multipath -trun "mpathconf --enable --with_multipathd y --user_friendly_names y" -trun "service multipathd status" -sleep 5 +cleanup () +{ + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove deviece" + tend + fi + tlog "removing multipath device" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" +} -trun "multipath -F" -sleep 5 -terr "modprobe -r scsi_debug" -terr "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \ -max_luns=2 no_lun_0=1" -sleep 60 +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -disk_path=$(get_scsi_debug_devices) -disk=$(basename $disk_path) -mpath_name=$(get_mpath_disk_by_scsi_device $disk) +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf + +blacklist_exceptions { + device { + vendor Linux + product scsi_debug + } +} +_EOF_ + trun "cat /etc/multipath.conf" +} + +do_reconfigure () +{ + tok "multipathd reconfigure" + sleep 5 +} + +rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath +cleanup +setup_config +trun "rm -r /etc/multipath/bindings" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done + +trun 'multipathd show maps raw format "%n"' +mpath_name=`multipathd show maps raw format "%n" | head -1` +assert "[[ -n $mpath_name ]] && [[ $mpath_name != ok ]]" new_alias="mpath_test_$$" trun "sed -i 's/$mpath_name/$new_alias/' /etc/multipath/bindings" -trun "multipath -r" -sleep 5 -tok "[[ -b /dev/mapper/$new_alias ]]" -tok is_mpath $new_alias -sleep 5 +do_reconfigure +trun 'multipathd show maps raw format "%n"' +mpath_name=`multipathd show maps raw format "%n" | head -1` +assert "[[ $mpath_name = $new_alias ]]" -trun "multipath -F" -sleep 5 -trun "modprobe -r scsi_debug" -trun "service multipathd stop" -sleep 3 -trun "multipath -W" -trun "rm /etc/multipath/bindings" +cleanup tend diff --git a/tests/find_multipaths/Makefile b/tests/find_multipaths/Makefile deleted file mode 100644 index b78dc57..0000000 --- a/tests/find_multipaths/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/bash - -# Copyright (c) 2016 Red Hat, Inc. -# # -# # This program is free software: you can redistribute it and/or modify -# # it under the terms of the GNU General Public License as published by -# # the Free Software Foundation, either version 3 of the License, or -# # (at your option) any later version. -# # -# # This program is distributed in the hope that it will be useful, -# # but WITHOUT ANY WARRANTY; without even the implied warranty of -# # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# # GNU General Public License for more details. -# # -# # You should have received a copy of the GNU General Public License -# # along with this program. If not, see . -# -# # Author: Lin Li - -.PHONY: all install download clean - -BUILT_FILES= - -FILES=$(METADATA) Makefile PURPOSE main.sh - -run: $(FILES) build - ./main.sh - -build: $(BUILT_FILES) - chmod a+x ./main.sh - -clean: - rm -f *~ *.rpm $(BUILT_FILES) - -include /usr/share/rhts/lib/rhts-make.include - -$(METADATA): Makefile - @touch $(METADATA) - @echo "Owner: LiLin " > $(METADATA) - @echo "Name: $(TEST)" >> $(METADATA) - @echo "Path: $(TEST_DIR)" >> $(METADATA) - @echo "License: GPLv3" >> $(METADATA) - @echo "TestVersion: $(TESTVERSION)" >> $(METADATA) - @echo "Description: find_multipaths" >> $(METADATA) - @echo "TestTime: 15m" >> $(METADATA) - @echo "RunFor: device-mapper-multipath" >> $(METADATA) - @echo "Requires: device-mapper-multipath" >> $(METADATA) - - rhts-lint $(METADATA) diff --git a/tests/find_multipaths/main.sh b/tests/find_multipaths/main.sh index a39af79..28c325c 100755 --- a/tests/find_multipaths/main.sh +++ b/tests/find_multipaths/main.sh @@ -18,38 +18,92 @@ # Author: Lin Li #set -x -source ../include/ec.sh || exit 200 +source ../include/tc.sh || exit 200 +tlog "running $0" + +remove_devices () +{ + local retries + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove devices" + cleanup + tend + fi + tlog "removing multipath devices" + trun "udevadm settle" + trun "multipath -F" + sleep 2 + done +} cleanup () { - trun "multipathd disablequeueing maps" - trun "service multipathd stop" - sleep 5 - trun "udevadm settle" - trun "multipath -F" - sleep 5 - trun "modprobe -r scsi_debug" + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove devices" + tend + fi + tlog "removing multipath devices" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" + trun "rm -f /etc/multipath/wwids" + trun "rm -r /etc/multipath/bindings" } -tlog "running $0" +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -# which not set find_multipaths yes, so multipath always create a multipath device for single device -# so stop service and reconfig with --find_multipaths y, and reload/start the service again. -rpm -q device-mapper-multipath || yum install -y device-mapper-multipath +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y --find_multipaths y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf -# test with find_multipath=y, will not multipath for the single device; reload/start the service to enable the config -cleanup -trun "rm -f /etc/multipath.conf" -trun "mpathconf --enable --user_friendly_names y --find_multipaths y --with_multipathd n" -sed -i '/^blacklist[[:space:]]*{/ a\ - device {\n vendor ".*"\n product ".*"\n } -' /etc/multipath.conf -if grep -qw blacklist_exceptions /etc/multipath.conf ; then - sed -i '/^blacklist_exceptions[[:space:]]*{/ a\ - device {\n vendor Linux\n product scsi_debug\n } -' /etc/multipath.conf -else - cat << _EOF_ >> /etc/multipath.conf blacklist_exceptions { device { vendor Linux @@ -57,56 +111,69 @@ blacklist_exceptions { } } _EOF_ -fi -trun "service multipathd start" + trun "cat /etc/multipath.conf" +} + +do_reconfigure () +{ + trun "cat /etc/multipath.conf" + tok "multipathd reconfigure" + sleep 5 +} + +trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath" +cleanup +setup_config + +# test with find_multipath=y, will not multipath the single device trun "modprobe scsi_debug" sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ $mpath_name = '[orphan]' ]]" +remove_devices + +# test with find_multipath=n, will multipath the single device +trun 'mpathconf --find_multipaths n' +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" +remove_devices + +# test with find_multipath=y, with multipath single device with known WWID +trun 'mpathconf --find_multipaths y' +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" +remove_devices + +# Clear WWID, test with find_multipath=y, will not multipath single device trun "multipath -W" -cat /etc/multipath/wwids -trun "multipath" -disk_path=$(get_scsi_debug_devices) -disk_node=$(basename $disk_path) -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok '[[ $mpath_name = "[orphan]" ]]' - -# test with find_multipath=n, will multipath for the single device -trun "mpathconf --user_friendly_names y --find_multipaths n --with_multipathd y" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" - -# flush new created path -trun "multipath -F" -sleep 1 - -# test with find_multipath=y, A path has the same WWID as a multipath device that was previously created -trun "mpathconf --user_friendly_names y --find_multipaths y --with_multipathd y" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" -trun "multipath -F" -sleep 1 - -# Clear wwid, test with find_multipath=y, will not multipath for the single device -trun "multipath -W" -trun "service multipathd reload" -sleep 5 -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok '[[ $mpath_name = "[orphan]" ]]' - -trun "multipath -F" -sleep 5 -trun "modprobe -r scsi_debug" +do_reconfigure +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ $mpath_name = '[orphan]' ]]" +remove_devices +assert 'rmmod scsi_debug' # test find_multipaths=y create device for paths have same wwid -tok "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 max_luns=2 no_lun_0=1" -sleep 10 -disk_paths=$(get_scsi_debug_devices) -disk_node=$(basename $disk_paths) -mpath_name=$(get_mpath_disk_by_scsi_device $disk_node) -tok "is_mpath $mpath_name" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun 'multipathd show paths raw format "%d %m"' +trun 'cat /etc/multipath/wwids' +mpath_name=`multipathd show paths raw format "%m" | head -1` +tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]" cleanup -trun "multipath -W" -cat /etc/multipath/wwids tend diff --git a/tests/include/ec.sh b/tests/include/ec.sh index 22dfc40..4b0aba9 100755 --- a/tests/include/ec.sh +++ b/tests/include/ec.sh @@ -44,9 +44,12 @@ function _init (){ } function _destroy (){ - sleep 10 - Cmd "multipath -F" + Cmd "multipathd disablequeueing maps" sleep 5 + Cmd "multipath -DF -R2" + Cmd "service multipathd stop" + sleep 5 + Cmd "udevadm settle" Cmd "modprobe -r scsi_debug" } @@ -174,10 +177,7 @@ AA fi #setup scsi_debug echo "INFO: Loading scsi_debug module for simulation of mpath" - modprobe scsi_debug \ - num_tgts=1 vpd_use_hostno=0 \ - add_host=4 delay=20 \ - max_luns=2 no_lun_0=1 2>&1 1>/dev/null + modprobe scsi_debug vpd_use_hostno=0 add_host=2 echo "INFO: Waiting for udev to create /dev/sdX" sleep 15s #wait for udev to create /dev/sdX @@ -189,8 +189,6 @@ AA #enable multipath for scsi_debug. cat << AA > /etc/multipath.conf defaults { -#Enable multibus is for mutlbus testing - path_grouping_policy multibus user_friendly_names yes } blacklist { diff --git a/tests/medium_error_scsi_debug/main.sh b/tests/medium_error_scsi_debug/main.sh index db2f008..35c6e6f 100755 --- a/tests/medium_error_scsi_debug/main.sh +++ b/tests/medium_error_scsi_debug/main.sh @@ -16,47 +16,51 @@ # along with this program. If not, see . # Author: LiLin +source ../include/tc.sh || exit 200 -function cleanup() +cleanup() { sleep 5 udevadm settle - multipath -F + trun "multipath -DF" sleep 5 - modprobe -r scsi_debug - - return 0 + trun "modprobe -r scsi_debug" } -yum -y install device-mapper device-mapper-multipath -mpathconf --enable -service multipathd stop -modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 max_luns=2 no_lun_0=1 opts=2 +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} + +tlog "running $0" +rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath +trun "multipathd disablequeueing maps" +cleanup +trun "service multipathd stop" +trun "rm -f /etc/multipath.conf" +trun "mpathconf --enable" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2 opts=2" sleep 5 -multipath > /dev/null +trun "multipath" sleep 5 +trun "multipath -l" mpathdev=`multipath -l | grep scsi_debug | awk '{print $1}' | head -1` -if [ -z "$mpathdev" ]; then - echo "------- FAIL, no multipath device created -----" - cleanup - exit 1 -fi +assert "[[ -n \"$mpathdev\" ]]" before_active=`multipath -l $mpathdev | grep "active undef" | wc -l` +tlog "before active = ${before_active}" IO_error=`dd if=/dev/zero of=/dev/mapper/$mpathdev bs=1024 seek=2330 count=10 2>&1 | grep -o "Input/output error" ` -if [ -n "$IO_error" ];then - after_active=`multipath -l $mpathdev | grep "active undef" | wc -l` - if [ "$before_active" -eq "$after_active" ]; then - echo "------- PASS, a medium error, correctly generated an I/O error and did not fail paths -----" - cleanup - exit 0 - else - echo "------- FAIL, paths failed -----" - cleanup - exit 1 - fi -else - echo "------- FAIL, did not generate an I/O error -----" - cleanup - exit 1 -fi +assert "[[ -n \"$IO_error\" ]]" +after_active=`multipath -l $mpathdev | grep "active undef" | wc -l` +tlog "after active = ${after_active}" +assert "[[ \"$before_active\" -eq \"$after_active\" ]]" +cleanup +tend diff --git a/tests/multipath_conf_syntax/main.sh b/tests/multipath_conf_syntax/main.sh index 331d65e..fb303c3 100755 --- a/tests/multipath_conf_syntax/main.sh +++ b/tests/multipath_conf_syntax/main.sh @@ -119,7 +119,7 @@ tok "multipath -ll | grep mypath" # test wrong alias keyword trun "sed -i 's/alias.*$/alia mypath/g' /etc/multipath.conf" -tok "multipath 2>&1 | grep 'invalid keyword: alia'" +tok "multipath 2>&1 | grep 'invalid keyword in the multipath section: alia'" trun "multipath -r" tok "multipath -ll | grep mpath" trun "sed -i 's/alia.*$/alias mypath/g' /etc/multipath.conf" diff --git a/tests/provision.fmf b/tests/provision.fmf deleted file mode 100644 index 62a6eba..0000000 --- a/tests/provision.fmf +++ /dev/null @@ -1,5 +0,0 @@ ---- - -standard-inventory-qcow2: - qemu: - m: 2G diff --git a/tests/restate_module/main.sh b/tests/restate_module/main.sh index 7f3279d..be60eba 100755 --- a/tests/restate_module/main.sh +++ b/tests/restate_module/main.sh @@ -48,10 +48,8 @@ rpm -q device-mapper-multipath || yum install -y device-mapper-multipath tlog "device-mapper-multipath is installed" # cleanup existing devices trun "rm /etc/multipath.conf" -trun "mpathconf --enable --with_module y" -sed -i '/^defaults[[:space:]]*{/ a\ - max_polling_interval 10 -' /etc/multipath.conf +trun "mpathconf --enable --with_module y --option max_polling_interval:10" +trun "mpathconf --option detect_pgpolicy_use_tpg:yes" trun "service multipathd stop" trun "multipath -F" sleep 5 @@ -69,7 +67,7 @@ tlog "Checking if active path count equals 2" assert "[[ $pathcount -eq 2 ]]" tlog "offline one path device" -pathname=`multipathd show paths raw format "%d %m" | grep ${mpathdev} | head -1 | awk '{print $1}'` +pathname=`multipathd show paths raw format "%d %m %p" | grep ${mpathdev} | sort -k 3n | head -1 | awk '{print $1}'` tlog "path to offline: ${pathname}" trun "echo 'offline' > /sys/block/${pathname}/device/state" tlog "waiting for multipathd to fail path" diff --git a/tests/tests.yml b/tests/tests.yml deleted file mode 100644 index 15f26d2..0000000 --- a/tests/tests.yml +++ /dev/null @@ -1,44 +0,0 @@ ---- -# No tests suitable for atomic environment -# No tests suitable for container environment - -# Tests suitable for classic environment -- hosts: localhost - roles: - - role: standard-test-basic - tags: - - classic - tests: - - medium_error_scsi_debug: - run: ./main.sh - timeout: 15m - - squelch_scsi_id: - run: ./main.sh - timeout: 15m - - multipathd_oom: - run: ./main.sh - timeout: 15m - - user_friendly_names: - run: ./main.sh - timeout: 15m - - kpartx_4k_aligned: - run: ./main.sh - timeout: 15m - - bindings: - run: ./main.sh - timeout: 15m - - restate_module: - run: ./main.sh - timeout: 15m - - find_multipaths: - run: ./main.sh - timeout: 15m - - multipath_conf_syntax: - run: ./main.sh - timeout: 15m - - alias_clash: - run: ./main.sh - timeout: 15m - required_packages: - - device-mapper-multipath - - perl diff --git a/tests/user_friendly_names/main.sh b/tests/user_friendly_names/main.sh index 56082fd..1d48801 100755 --- a/tests/user_friendly_names/main.sh +++ b/tests/user_friendly_names/main.sh @@ -17,50 +17,125 @@ # Author: Lin Li -source ../include/ec.sh || exit 200 - +source ../include/tc.sh || exit 200 tlog "running $0" -trun "rpm -q device-mapper-multipath || yum install -y device-mapper-multipath" -trun "mpathconf --enable --with_multipathd y --user_friendly_names y" +cleanup () +{ + local retries + if pidof multipathd; then + tlog "stopping multipathd" + trun "systemctl stop multipathd.service || pkill multipathd" + sleep 1 + fi + retries=10 + while pidof multipathd; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to stop multipath" + tend + fi + tlog "waiting for multipathd to stop" + sleep 2 + pidof multipathd && pkill multipathd + done + trun "multipath -l -v1" + retries=10 + while [[ -n `multipath -l -v1` ]]; do + ((retries--)) + if [[ $retries -le 0 ]]; then + tfail_ "failed to remove deviece" + tend + fi + tlog "removing multipath device" + trun "udevadm settle" + trun "multipath -DF" + sleep 2 + done + if lsmod | grep -q "^scsi_debug"; then + tlog "removing scsi_debug module" + tok "rmmod scsi_debug" + fi + trun "rm -f /etc/multipath.conf" +} -# backup the /etc/multipath.conf -trun "cp /etc/multipath.conf /etc/multipath.conf.$$" -trun "multipath -F" +assert () +{ + local cmd="$*" + _trun_ "$cmd" 0 + if test $? -eq 0; then + tpass_ "$cmd" ; + else + tfail_ "$cmd" ; + cleanup ; + tend ; + fi +} -trun "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \ -max_luns=2 no_lun_0=1" -trun "multipath" -# wwid shown slowly on s390x by the script framework, but normally when run by multipath command directly -# so extend sleep time -sleep 20 +setup_config () +{ + trun "mpathconf --enable --user_friendly_names y" + sed -i '/^blacklist[[:space:]]*{/ a\ + device {\ + vendor ".*"\ + product ".*"\ + } +' /etc/multipath.conf + cat << _EOF_ >> /etc/multipath.conf -disk=$(get_scsi_debug_devices) -disk=$(basename $disk) -wwid=$(get_wwid_of_disk $disk) -mpath=$(get_mpath_disk_by_scsi_device $disk) +blacklist_exceptions { + device { + vendor Linux + product scsi_debug + } +} -# user_friendly_names = yes and mpath=test -#cur_dir=/mnt/tests/kernel/storage/multipath/user_friendly_names/ -#cur_dir=/home/test/scratch/device-mapper-multipath/user_friendly_names -trun "cat multipath.conf.yes | sed "s/your_wwid/$wwid/g" > /etc/multipath.conf" -trun "cat -n /etc/multipath.conf" -trun "multipath -r" -echo ">>> Verify 'test ($wwid)' is present ..." -trun "multipath -ll" -tok "multipath -ll | egrep \"^test\"" +multipaths { + multipath { + wwid TEST_WWID + alias test + } +} +_EOF_ + trun "cat /etc/multipath.conf" +} -# user_friendly_names = no -trun "cat multipath.conf.no > /etc/multipath.conf" -trun "multipath -r" -echo ">>> Verify 'test' is gone but '$wwid' present ..." -trun "multipath -ll" -tok "multipath -ll | egrep \"^$wwid\"" -sleep 10 -tok "multipath -F $wwid" -sleep 10 -trun "modprobe -r scsi_debug" +do_reconfigure () +{ + trun "cat /etc/multipath.conf" + tok "multipathd reconfigure" + sleep 5 +} -trun "cp /etc/multipath.conf.$$ /etc/multipath.conf" -trun "multipath -F; multipath" +trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath" +cleanup +setup_config +trun "rm -r /etc/multipath/bindings" +trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2" +sleep 5 +trun "systemctl start multipathd.service" +while multipathd show daemon | grep -qv idle; do + tlog "waiting for multipathd to start" + sleep 1 +done +trun 'multipathd show maps raw format "%n %w"' +# verify user_friendly_name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q mpath' +wwid=`multipathd show maps raw format "%w" | head -1` +assert "[[ -n $wwid ]] && [[ $wwid != ok ]]" +sed -i 's/TEST_WWID/'"$wwid"'/' /etc/multipath.conf +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +# verify configured alias takes precedence over user_friendly_name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q test' +trun "mpathconf --user_friendly_names n" +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +# verify configured alias takes precedence over wwid name +tok 'multipathd show maps raw format "%n" | head -1 | grep -q test' +sed -i 's/'"$wwid"'/TEST_WWID/' /etc/multipath.conf +do_reconfigure +trun 'multipathd show maps raw format "%n %w"' +tok 'multipathd show maps raw format "%n" | head -1 | grep -q '"$wwid" +cleanup tend diff --git a/tests/user_friendly_names/multipath.conf.no b/tests/user_friendly_names/multipath.conf.no deleted file mode 100644 index b916bfb..0000000 --- a/tests/user_friendly_names/multipath.conf.no +++ /dev/null @@ -1,3 +0,0 @@ -defaults { - user_friendly_names no -} diff --git a/tests/user_friendly_names/multipath.conf.yes b/tests/user_friendly_names/multipath.conf.yes deleted file mode 100644 index ffc21bb..0000000 --- a/tests/user_friendly_names/multipath.conf.yes +++ /dev/null @@ -1,11 +0,0 @@ -defaults { - user_friendly_names yes -} - -multipaths { - multipath { - wwid your_wwid - alias test - } -} -