updated sources

- There are some issues when the s390x optimizations are turned on - the hufts test fails
- This will need some further investigation, for the time, I've disabled the optimizations

.fmf/version

@@ -0,0 +1 @@
+1

.gitignore

@@ -4,3 +4,8 @@ gzip-1.4.tar.xz
 /gzip-1.7.tar.xz
 /gzip-1.8.tar.xz
 /gzip-1.9.tar.xz
+/gzip-1.10.tar.xz
+/gzip-1.11.tar.xz
+/gzip-1.12.tar.xz
+/gzip-1.13.tar.xz
+/gzip-1.14.tar.xz

gzip.spec

@@ -1,27 +1,27 @@
-Summary: The GNU data compression program
+Summary: GNU data compression program
 Name: gzip
-Version: 1.9
-Release: 7%{?dist}
+Version: 1.14
+Release: 1%{?dist}
 # info pages are under GFDL license
-License: GPLv3+ and GFDL
-Group: Applications/File
-Source0: http://ftp.gnu.org/gnu/gzip/gzip-%{version}.tar.xz
+License: GPL-3.0-or-later AND GFDL-1.3-only
+Source0: https://ftp.gnu.org/gnu/gzip/gzip-%{version}.tar.xz
 Source1: https://www.gnu.org/licenses/fdl-1.3.txt
 
 # downstream solution for coloured z*grep (#1034839)
 Source100: colorzgrep.csh
 Source101: colorzgrep.sh
 
-Patch1: gnulib.patch
+Patch1: s390_errno.patch
 
 # Fixed in upstream code.
 # http://thread.gmane.org/gmane.comp.gnu.gzip.bugs/378
-URL: http://www.gzip.org/
+URL: https://www.gzip.org/
 # Requires should not be added for gzip wrappers (eg. zdiff, zgrep,
 # zless) of another tools, because gzip "extends" the tools by its
 # wrappers much more than it "requires" them.
 Requires: coreutils 
-BuildRequires: texinfo, gcc
+BuildRequires: texinfo, gcc, autoconf, automake, less
+BuildRequires: make
 Conflicts: filesystem < 3
 Provides: /bin/gunzip
 Provides: /bin/gzip
@@ -39,8 +39,10 @@ very commonly used data compression program.
 
 %prep
 %setup -q
-%patch1 -p1 -b .gnulib
+%patch 1 -p1
+
 cp %{SOURCE1} .
+autoreconf
 
 %build
 export DEFS="NO_ASM"
@@ -48,12 +50,23 @@ export CPPFLAGS="-DHAVE_LSTAT"
 export CC="%{__cc}"
 export CPP="%{__cpp}"
 export CXX="%{__cxx}"
+%ifarch s390x
+
+#When the otpimizations are enabled, the huft test fails as of F44/gzip1.14
+#export CFLAGS="$RPM_OPT_FLAGS -Dalignas=_Alignas -DDFLTCC_LEVEL_MASK=0x7e"
+#use this in the next realease after gzip 1.13 export CFLAGS="$RPM_OPT_FLAGS -DDFLTCC_LEVEL_MASK=0x7e"
+#%configure --enable-dfltcc
+
 %configure
+%else
+%configure
+%endif
 make
+%check
+make check
 #make gzip.info
 
 %install
-rm -rf ${RPM_BUILD_ROOT}
 %makeinstall
 
 gzip -9nf ${RPM_BUILD_ROOT}%{_infodir}/gzip.info*
@@ -61,7 +74,7 @@ gzip -9nf ${RPM_BUILD_ROOT}%{_infodir}/gzip.info*
 # we don't ship it, so let's remove it from ${RPM_BUILD_ROOT}
 rm -f ${RPM_BUILD_ROOT}%{_infodir}/dir
 # uncompress is a part of ncompress package
-rm -f ${RPM_BUILD_ROOT}/%{_bindir}/uncompress
+rm -f ${RPM_BUILD_ROOT}%{_bindir}/uncompress
 
 # coloured z*grep (#1034839)
 %global profiledir %{_sysconfdir}/profile.d
@@ -71,7 +84,6 @@ install -p -m 644 %{SOURCE101} %{buildroot}%{profiledir}
 
 %files
 %doc NEWS README AUTHORS ChangeLog THANKS TODO
-%{!?_licensedir:%global license %%doc}
 %license COPYING fdl-1.3.txt
 %{_bindir}/*
 %{_mandir}/*/*
@@ -79,6 +91,88 @@ install -p -m 644 %{SOURCE101} %{buildroot}%{profiledir}
 %{profiledir}/*
 
 %changelog
+* Thu Aug 14 2025 Jakub Martisko <jamartis@redhat.com> - 1.14-1
+- Rebase to gzip 1.14
+- There are some issues when the s390x optimizations are turned on - the hufts test fails
+- This will need some further investigation, for the time, I've disabled the optimizations
+
+* Thu Jul 24 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.13-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Fri Jan 17 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.13-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.13-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Thu Feb 01 2024 Jakub Martisko <jamartis@redhat.com> - 1.13-1
+- Rebase to gzip 1.13
+- There's a bug on s390x: https://lists.gnu.org/archive/html/bug-gzip/2023-10/msg00000.html
+- Revert the s390x build options in the next release
+Resolves: rhbz#2232890
+
+* Wed Jan 24 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.12-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Sat Jan 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.12-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Wed Aug 02 2023 Jakub Martisko <jamartis@redhat.com> - 1.12-6
+- Enbale the s390x optimizations
+Resolves: rhbz#2175699
+
+* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.12-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Thu Apr 13 2023 Lukáš Zaoral <lzaoral@redhat.com> - 1.12-4
+- migrate to SPDX license format
+
+* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.12-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.12-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Mon Apr 11 2022 Jakub Martisko <jamartis@redhat.com> - 1.12-1
+- Rebase to gzip 1.12
+Resolves: rhbz#2073133
+Resolves: CVE-2022-1271
+
+* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.11-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Thu Oct 21 2021 Jakub Martisko <jamartis@redhat.com> - 1.11-1
+- Rebase to gzip 1.11
+- Run the tests in the check section instead of the build section
+Resolve: rhbz#2001025
+
+* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.10-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.10-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.10-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.10-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Fri Aug 09 2019 Jakub Martisko <jamartis@redhat.com> - 1.10-1
+- Rebase to 1.10
+
+* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.9-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Tue Mar 26 2019 Jakub Martisko <jamartis@redhat.com> - 1.9-9
+- Fix wrong skip size in gzexe
+- Add new test dealing with the ^^ (needs autoreconf)
+- Enable make check (needs less)
+  Related: 1690825
+
+* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.9-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
 * Thu Jul 26 2018 Jakub Martisko <jamartis@redhat.com> - 1.9-7
 - Fix FTBFS bug (gnulib problems)
 - more details: https://lists.gnu.org/r/bug-gnulib/2018-03/msg00000.html

plans/all.fmf

@@ -0,0 +1,6 @@
+summary: Basic smoke test
+discover:
+    how: fmf
+    url: https://src.fedoraproject.org/tests/gzip.git
+execute:
+    how: tmt

s390_errno.patch

@@ -0,0 +1,26 @@
+From c76affb4551630ff661ac1c1ee99353a17eb16e1 Mon Sep 17 00:00:00 2001
+From: Paul Eggert <eggert@cs.ucla.edu>
+Date: Fri, 30 May 2025 12:31:04 -0700
+Subject: gzip: fix s390x build failure
+
+Problem reported by Jakub Martisko <https://bugs.gnu.org/78618>.
+* dfltcc.c: Include errno.h.
+---
+ dfltcc.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/dfltcc.c b/dfltcc.c
+index 9f86581..8307a97 100644
+--- a/dfltcc.c
++++ b/dfltcc.c
+@@ -17,6 +17,7 @@
+ 
+ #include <config.h>
+ 
++#include <errno.h>
+ #include <stdlib.h>
+ 
+ #ifdef HAVE_SYS_SDT_H
+-- 
+cgit v1.2.3
+

sources

@@ -1 +1 @@
-SHA512 (gzip-1.9.tar.xz) = c0852e7f7662141e79d14bc36e50f1940dba3e804feff3b0b8fa084ffec720ac245352282d2f1db117fadc95758424dd418d192b94621dac4367834ccf101fad
+SHA512 (gzip-1.14.tar.xz) = 82aef53188b3e69b51b7ddab5b8c44a11a5b73c0039b22a315a0c7d244694feab0146748add4265901eb1b4c0cee8a9eb69594995f098830d964091af97079c5

tests/.gitignore

@@ -1,2 +0,0 @@
-*.swp
-*.retry

tests/test-simple

@@ -1,11 +0,0 @@
-#!/bin/sh
-set -ex
-
-# exercise installed gzip/gunzip programs
-echo "Bla" > bla.file
-cp bla.file bla.file.orig
-gzip bla.file
-gunzip bla.file.gz
-cmp bla.file bla.file.orig
-echo "hi"
-rm bla.file bla.file.orig

tests/test_simple.yml

@@ -1,32 +0,0 @@
----
-- hosts: localhost
-  vars:
-  - artifacts: ./artifacts
-  tags:
-  - atomic
-  - classic
-  - container
-  remote_user: root
-  tasks:
-  - name: Create the folder where we will store the tests
-    action: file state=directory path={{ item }}
-            owner=root group=root
-    with_items:
-    - /usr/local/bin
-
-  - name: Install the test files
-    copy: src={{ item.file }} dest=/usr/local/bin/{{ item.dest }}
-           mode=0755
-    with_items:
-    - {file: test-simple, dest: test-simple }
-
-  - block:
-    - name: Execute the tests
-      shell: exec > /tmp/test.log && /usr/local/bin/test-simple 2>&1
-
-  - always:
-    - name: Pull out the logs
-      fetch:
-        dest: "{{ artifacts }}/"
-        src: "/tmp/test.log"
-        flat: yes

tests/tests.yml

@@ -1 +0,0 @@
-- include: test_simple.yml