diff --git a/bcm2837-fix-wifi-gpio-polarity.patch b/bcm2837-fix-wifi-gpio-polarity.patch
deleted file mode 100644
index 96055f78a..000000000
--- a/bcm2837-fix-wifi-gpio-polarity.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From e25b6783c7b1bb79103d4617336879423f86b05e Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Mon, 3 Dec 2018 19:37:08 +0100
-Subject: ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
-
-The commit b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
-introduced a wifi power sequence. Unfortunately the polarity of the reset
-GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and
-later in 3 B+. This wasn't discovered before since the power sequence
-takes only effect in case the relevant MMC driver is compiled as a module.
-
-Fixes: b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
-Cc: stable@vger.kernel.org
-Reported-by: Matthias Lueschner <lueschem@gmail.com>
-Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Reviewed-by: Eric Anholt <eric@anholt.net>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
- arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-index 4adb85e66be3..93762244be7f 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-@@ -31,7 +31,7 @@
- 
- 	wifi_pwrseq: wifi-pwrseq {
- 		compatible = "mmc-pwrseq-simple";
--		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
-+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
- 	};
- };
- 
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-index c318bcbc6ba7..89e6fd547c75 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-@@ -26,7 +26,7 @@
- 
- 	wifi_pwrseq: wifi-pwrseq {
- 		compatible = "mmc-pwrseq-simple";
--		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
-+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
- 	};
- };
- 
--- 
-cgit 1.2-0.3.lf.el7
diff --git a/kernel.spec b/kernel.spec
index 46f5a8129..3a09248c2 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -54,7 +54,7 @@ Summary: The Linux kernel
 %if 0%{?released_kernel}
 
 # Do we have a -stable update to apply?
-%define stable_update 10
+%define stable_update 11
 # Set rpm version accordingly
 %if 0%{?stable_update}
 %define stablerev %{stable_update}
@@ -598,9 +598,6 @@ Patch332: raspberrypi-Fix-firmware-calls-with-large-buffers.patch
 # From 4.20, fix eth link/act lights on 3B+
 Patch334: bcm2837-fix-eth-leds.patch
 
-# From 4.20, fix wifi gpio polarity
-Patch335: bcm2837-fix-wifi-gpio-polarity.patch
-
 # Patches enabling device specific brcm firmware nvram
 # https://www.spinics.net/lists/linux-wireless/msg178827.html
 Patch340: brcmfmac-Remove-firmware-loading-code-duplication.patch
@@ -1896,6 +1893,9 @@ fi
 #
 #
 %changelog
+* Thu Dec 20 2018 Jeremy Cline <jcline@redhat.com> - 4.19.11-300
+- Linux v4.19.11
+
 * Mon Dec 17 2018 Jeremy Cline <jcline@redhat.com> - 4.19.10-300
 - Linux v4.19.10
 
diff --git a/sources b/sources
index 957672fe7..5b0472b40 100644
--- a/sources
+++ b/sources
@@ -1,2 +1,2 @@
 SHA512 (linux-4.19.tar.xz) = ab67cc746b375a8b135e8b23e35e1d6787930d19b3c26b2679787d62951cbdbc3bb66f8ededeb9b890e5008b2459397f9018f1a6772fdef67780b06a4cb9f6f4
-SHA512 (patch-4.19.10.xz) = 9bbf8d18d5b5bd72fddf03af8757b38ae240193018b7a4065b2c45dcc6a28969e87c876497a4a7a57ef362aa390bf9bd81ffb43afb15976deb3eca203e499f94
+SHA512 (patch-4.19.11.xz) = 7dbf211441848db045e3c29b885bfadf4c1dea0bf738c0e719c9fb09551a7c41b85e59c995e66a4e354cba42ba302f4988e334e80ef864d92085b938a8954589