.gitignore

@@ -1,2 +0,0 @@
-*.xz
-*.bz2

Makefile.rhelver

@@ -1,60 +0,0 @@
-RHEL_MAJOR = 10
-RHEL_MINOR = 99
-
-#
-# RHEL_RELEASE
-# -------------
-#
-# Represents build number in 'release' part of RPM's name-version-release.
-#   name is <package_name>, e.g. kernel
-#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
-#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-RHEL_RELEASE = 38
-
-#
-# RHEL_REBASE_NUM
-# ----------------
-#
-# Used in RPM version string for Gemini kernels, which dont use upstream
-# VERSION/PATCHLEVEL/SUBLEVEL. The number represents rebase number for
-# current MAJOR release.
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-RHEL_REBASE_NUM = 1
-
-
-#
-# ZSTREAM
-# -------
-#
-#  This variable controls whether we use zstream numbering or not for the
-#  package release. The zstream release keeps the build number of the last
-#  build done for ystream for the Beta milestone, and increments a second
-#  number for each build. The third number is used for branched builds
-#  (eg.: for builds with security fixes or hot fixes done outside of the
-#  batch release process).
-#
-#  For example, with ZSTREAM unset or set to "no", all builds will contain
-#  a release with only the build number, eg.: kernel-<kernel version>-X.el*,
-#  where X is the build number. With ZSTREAM set to "yes", we will have
-#  builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
-#  RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
-#  build number and Z will always be 1 except if you're doing a branched build
-#  (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
-#  number will be incremented instead of the Y).
-#
-ZSTREAM ?= no
-
-#
-# Automotive
-# ----------
-#
-# Represents the major and minor release used by automotive.
-# Primarily this is used to to identify the build target when
-# building the automotive kernel package.
-AUTOMOTIVE_MAJOR = 2
-AUTOMOTIVE_MINOR = 99

Patchlist.changelog

@@ -1,474 +0,0 @@
-https://gitlab.com/cki-project/kernel-ark/-/commit/831ff9bcd8e9eab864062470a3250beb1e1ec924
- 831ff9bcd8e9eab864062470a3250beb1e1ec924 rust: Add -fdiagnostics-show-context to bindgen_skip_c_flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/fe3e9e24af806d756edbda922103b1fa95d9b89b
- fe3e9e24af806d756edbda922103b1fa95d9b89b Revert "Removing Obsolete hba pci-ids from rhel8"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c4a0a995da9df8732f688d09db5252173277589d
- c4a0a995da9df8732f688d09db5252173277589d rh_messages.h: add missing lpfc devices
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0ad9a88c3263fa8fa39437f69472588917255c99
- 0ad9a88c3263fa8fa39437f69472588917255c99 kernel: extend rh_waived to cope better with the CVE mitigations case
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cf18c49636f2583c85831f909699034026325242
- cf18c49636f2583c85831f909699034026325242 rh_messages.h: add missing aacraid device
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/26ca931184edb2c3c7f7c1951f53fa3333d9c90e
- 26ca931184edb2c3c7f7c1951f53fa3333d9c90e rh_messages.h: update unmaintained drivers
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c1c1a1b7059900f4b9b657f5189285a287160e11
- c1c1a1b7059900f4b9b657f5189285a287160e11 arm64: add early lockdown for secure boot
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a613ae52a8d9378e6fa70f697b3ce0acee220491
- a613ae52a8d9378e6fa70f697b3ce0acee220491 efi: pass secure boot mode to kernel proper
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f869258b6b654d316e84325e46e431da4dfd04e7
- f869258b6b654d316e84325e46e431da4dfd04e7 selftests/bpf: Remove ksyms_weak_lskel test
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8b69219fe6a11766cf1a2e07dc94e56448b47824
- 8b69219fe6a11766cf1a2e07dc94e56448b47824 Simplify include Makefile.rhelver
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c2621ac616e25a9a04fbcb8af0c1f8b2bdd8c099
- c2621ac616e25a9a04fbcb8af0c1f8b2bdd8c099 redhat: make ENABLE_WERROR also enable OBJTOOL_WERROR
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d28cbdeb89fe565e10fb4be8d8378153e86611f6
- d28cbdeb89fe565e10fb4be8d8378153e86611f6 main.c: fix initcall blacklisted
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b71ab57c8db44881edc32a124ddc2ebe536b6a4c
- b71ab57c8db44881edc32a124ddc2ebe536b6a4c arch/x86/kernel/setup.c: fix rh_check_supported
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c4ea2384863e54e0c5582b3508518e659581ce69
- c4ea2384863e54e0c5582b3508518e659581ce69 efi,lockdown: fix kernel lockdown on Secure Boot
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/60b2ddeb0986e1c43a98b44a4ab414a7e2744701
- 60b2ddeb0986e1c43a98b44a4ab414a7e2744701 Revert "nvme: Return BLK_STS_TARGET if the DNR bit is set"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/860632dd288c7aa7807959a79af9159482510cd1
- 860632dd288c7aa7807959a79af9159482510cd1 Revert "nvme: allow local retry and proper failover for REQ_FAILFAST_TRANSPORT"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/aaef2c3ee081c8980bb60fd4b7a6ed9e187d9048
- aaef2c3ee081c8980bb60fd4b7a6ed9e187d9048 Revert "nvme: decouple basic ANA log page re-read support from native multipathing"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5cd4353dae0ee79d13f57b7ccee85cd0bcbe4b4f
- 5cd4353dae0ee79d13f57b7ccee85cd0bcbe4b4f Revert "nvme: nvme_mpath_init remove multipath check"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/656a0565ffe54f99ac1390a68c5ee7050ab6fb25
- 656a0565ffe54f99ac1390a68c5ee7050ab6fb25 redhat: automotive: define CONFIG_RH_AUTOMOTIVE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f1025d6236c72b4fbd03940b6fa2178f2a84f418
- f1025d6236c72b4fbd03940b6fa2178f2a84f418 redhat: fix modules.order target
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6e0fa997052c92d6085a50083e75dedc0160443f
- 6e0fa997052c92d6085a50083e75dedc0160443f [redhat] rh_messages.h: driver and device updates
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d8822fd0573e9f254f097c1743078e4e74ac70f5
- d8822fd0573e9f254f097c1743078e4e74ac70f5 crypto: rng - Fix extrng EFAULT handling
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c224e4b6a61af08574bb0565755ed609bf08cacb
- c224e4b6a61af08574bb0565755ed609bf08cacb crypto: sig - Disable signing
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/39417e970be7f6bc63f34d5ed5511f7e629802c2
- 39417e970be7f6bc63f34d5ed5511f7e629802c2 crypto: rng - Ensure stdrng is tested before user-space starts
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/52be246b6342ed5b1486729fd5c5893b10549a92
- 52be246b6342ed5b1486729fd5c5893b10549a92 [redhat] rh_messages.h: Mark BlueField-4 as disabled
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2c9e64af9fa1f8599ce05877441afcac8ac91b04
- 2c9e64af9fa1f8599ce05877441afcac8ac91b04 Update the RHEL_DIFFERENCES help string
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/beef34cb1efc34b7fbee35535c66915995d12ed1
- beef34cb1efc34b7fbee35535c66915995d12ed1 redhat: include resolve_btfids in kernel-devel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1a1426b7a8df854c78385dd8ce8b74e9ee641477
- 1a1426b7a8df854c78385dd8ce8b74e9ee641477 redhat: workaround CKI cross compilation for scripts
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2c83d6cfffe1f891bf024df81be6cd41c2073ad9
- 2c83d6cfffe1f891bf024df81be6cd41c2073ad9 crypto: akcipher - Disable signing and decryption
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/af93553b8d335ccf5dd4f90ab9419e497aa36a80
- af93553b8d335ccf5dd4f90ab9419e497aa36a80 crypto: dh - implement FIPS PCT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f0540d9d32978dff227cbb930193e8dc2557b23b
- f0540d9d32978dff227cbb930193e8dc2557b23b crypto: ecdh - disallow plain "ecdh" usage in FIPS mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/243ef89ad354eea332d7bfb23fd4cf259240de91
- 243ef89ad354eea332d7bfb23fd4cf259240de91 crypto: seqiv - flag instantiations as FIPS compliant
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6a23cbc588e9b9f7b2bc7250c6c6903d4d904eb1
- 6a23cbc588e9b9f7b2bc7250c6c6903d4d904eb1 [kernel] bpf: set default value for bpf_jit_harden
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bb84b630a172d0204c8d243c57a6a1d2eae7843c
- bb84b630a172d0204c8d243c57a6a1d2eae7843c not upstream: Disable vdso getrandom when FIPS is enabled
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b643998c61552fb5615268e7e529999d64d54175
- b643998c61552fb5615268e7e529999d64d54175 Add support to rh_waived cmdline boot parameter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a1e04b6f3580382a902256c7bf8b395b9a1be47f
- a1e04b6f3580382a902256c7bf8b395b9a1be47f rh_flags: fix failed when register_sysctl_sz rh_flags_table to kernel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/03cf1862c6221ee2a6de9a5ab25adaec6460b62e
- 03cf1862c6221ee2a6de9a5ab25adaec6460b62e [redhat] rh_flags: constify the ctl_table argument of proc_handler
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e2708e55f9151652da80e388b4bf88c649288c0f
- e2708e55f9151652da80e388b4bf88c649288c0f redhat: rh_flags: declare proper static methods when !CONFIG_RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6f593811cc1e5664f45fe2d09916eada1187e992
- 6f593811cc1e5664f45fe2d09916eada1187e992 redhat: make bnx2xx drivers unmaintained in rhel-10
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5db8220bd67c719a20c1269233585b40f48837da
- 5db8220bd67c719a20c1269233585b40f48837da rh_flags: Rename rh_features to rh_flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/19ca502a0087eed65a014c6271f9bfc207d8d7eb
- 19ca502a0087eed65a014c6271f9bfc207d8d7eb kernel: rh_features: fix reading empty feature list from /proc
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ba24639032f00b47748a6f39a4eb33950df015c2
- ba24639032f00b47748a6f39a4eb33950df015c2 rh_features: move rh_features entry to sys/kernel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/883e43fe6a0da0d9ad90e7c997a95f11bab9b888
- 883e43fe6a0da0d9ad90e7c997a95f11bab9b888 rh_features: convert to atomic allocation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c8daa2e832df14ee9174435a357b2ae0994a3ef3
- c8daa2e832df14ee9174435a357b2ae0994a3ef3 add rh_features to /proc
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4f33dbbe3ec578d49e12c07421b913bf480fccef
- 4f33dbbe3ec578d49e12c07421b913bf480fccef add support for rh_features
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/53a5900b05260b81f13eb3b9d6a9419429f310ab
- 53a5900b05260b81f13eb3b9d6a9419429f310ab [redhat] PCI: Fix pci_rh_check_status() call semantics
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/aeb9a237a0ec39b7bde89d8bb040cd5b267f6802
- aeb9a237a0ec39b7bde89d8bb040cd5b267f6802 scsi: sd: condition probe_type under RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/159e72af8b1631b720f4a7e0012fa624764cecde
- 159e72af8b1631b720f4a7e0012fa624764cecde scsi: sd: remove unused sd_probe_types
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d8c04860eb7bf29617ca1754f1076fd9f5992e77
- d8c04860eb7bf29617ca1754f1076fd9f5992e77 [redhat] rh_messages.h: mark mlx5 on Bluefield-3 as unmaintained
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/496c64b4afece4ab525467a6be71ffe60d0c564f
- 496c64b4afece4ab525467a6be71ffe60d0c564f [redhat] rh_messages.h: initial driver and device lists
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5cf456aaba6f5c9406421c04c65d43b2c71f5927
- 5cf456aaba6f5c9406421c04c65d43b2c71f5927 arch/x86: Fix XSAVE check for x86_64-v2 check
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/252bf9586fca6e57a51966c0294a9a0cb33ff4f5
- 252bf9586fca6e57a51966c0294a9a0cb33ff4f5 arch/x86/kernel/setup.c: fixup rh_check_supported
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/30faf17591afbd4230d590355351044294ad43d2
- 30faf17591afbd4230d590355351044294ad43d2 lsm: update security_lock_kernel_down
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e88ee9e2e869e7259faa5bf3ff6689becabb53cb
- e88ee9e2e869e7259faa5bf3ff6689becabb53cb arch/x86: mark x86_64-v1 and x86_64-v2 processors as deprecated
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/26ebc304df38a49ce7cc69b4bdf220298cff2460
- 26ebc304df38a49ce7cc69b4bdf220298cff2460 redhat: kABI: add missing RH_KABI_SIZE_ALIGN_CHECKS Kconfig option
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8c71392703448be8e8217592dd46ea1cc8b157e1
- 8c71392703448be8e8217592dd46ea1cc8b157e1 redhat: rh_kabi: introduce RH_KABI_EXCLUDE_WITH_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d42afcb843fcc87e59ba39b5574c18d89fd07a91
- d42afcb843fcc87e59ba39b5574c18d89fd07a91 redhat: rh_kabi: move semicolon inside __RH_KABI_CHECK_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/95a56955f9ba6ef1e1dd2d99d8f98254da274267
- 95a56955f9ba6ef1e1dd2d99d8f98254da274267 random: replace import_single_range() with import_ubuf()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/92d6612578b79fd3a09e10504ed71209ba43c271
- 92d6612578b79fd3a09e10504ed71209ba43c271 ext4: Mark mounting fs-verity filesystems as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5c51745b8aec113ff0605ab833c3e472d99c55c8
- 5c51745b8aec113ff0605ab833c3e472d99c55c8 erofs: Add tech preview markers at mount
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6d687c70a7eda10eac0ddc6eedeaccc30eef5349
- 6d687c70a7eda10eac0ddc6eedeaccc30eef5349 kernel/rh_messages.c: Mark functions as possibly unused
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/dfb09b1d833cad815ea2f5cb69505010de260c40
- dfb09b1d833cad815ea2f5cb69505010de260c40 crypto: rng - Override drivers/char/random in FIPS mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ddbe3667f2462817f3f936141fff08604dde1564
- ddbe3667f2462817f3f936141fff08604dde1564 random: Add hook to override device reads and getrandom(2)
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/92525a9129d85fa6400c9e653379862a67cb43b2
- 92525a9129d85fa6400c9e653379862a67cb43b2 [redhat] kernel/rh_messages.c: move hardware tables to rh_messages.h
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/eacd81fdaf31d456a82c553735faf64c8efad2eb
- eacd81fdaf31d456a82c553735faf64c8efad2eb [redhat] kernel/rh_messages.c: Wire up new calls
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/32af8640a651c642ee5706dda0cf35ff508bcdcb
- 32af8640a651c642ee5706dda0cf35ff508bcdcb [redhat] drivers/pci: Update rh_messages.c
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/db366977f9e13f903cc9b7f22936b581594a7731
- db366977f9e13f903cc9b7f22936b581594a7731 [redhat] drivers/pci: Remove RHEL-only pci_hw_*() functions
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/402504ff66e5d118b514253df5d55f8413e2e167
- 402504ff66e5d118b514253df5d55f8413e2e167 scsi: sd: Add "probe_type" module parameter to allow synchronous probing
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5e96a345c6fb24e282ce1769223c1a339d0dbe94
- 5e96a345c6fb24e282ce1769223c1a339d0dbe94 Revert "Remove EXPERT from ARCH_FORCE_MAX_ORDER for aarch64"
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ce943989ae8cb2b8e0b4699c148584d3cd18ec9b
- ce943989ae8cb2b8e0b4699c148584d3cd18ec9b kernel/rh_messages.c: Another gcc12 warning on redundant NULL test
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c0624b3913d8c3f262e20910a2f2c4d2f99ce61f
- c0624b3913d8c3f262e20910a2f2c4d2f99ce61f Enable IO_URING for RHEL
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/861f2d38d82cfb374799ec517f18cc021701068e
- 861f2d38d82cfb374799ec517f18cc021701068e Remove EXPERT from ARCH_FORCE_MAX_ORDER for aarch64
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e02ec93117d6eea21e80baf69e6f9848cf1a9774
- e02ec93117d6eea21e80baf69e6f9848cf1a9774 redhat: version two of Makefile.rhelver tweaks
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/964e830b4fae678dec5b8b93dcd402c73fdf2912
- 964e830b4fae678dec5b8b93dcd402c73fdf2912 redhat:  adapt to upstream Makefile change
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/60a4025a3b1cdec1c7bbdabf1e30278f615bb493
- 60a4025a3b1cdec1c7bbdabf1e30278f615bb493 kernel/rh_messages.c: gcc12 warning on redundant NULL test
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a5c9e3c6e3dcda60b5f753d1bae86a686f3ac087
- a5c9e3c6e3dcda60b5f753d1bae86a686f3ac087 Change acpi_bus_get_acpi_device to acpi_get_acpi_dev
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/092e751fe418623c5ad04e77fa6c993d48d96533
- 092e751fe418623c5ad04e77fa6c993d48d96533 ARK: Remove code marking devices unmaintained
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c27fa327fb3de69773568d211fd2f8f13a72e342
- c27fa327fb3de69773568d211fd2f8f13a72e342 rh_message: Fix function name
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c9b07fd3a141ad0283d7eaadf5a06aec9af2b8c9
- c9b07fd3a141ad0283d7eaadf5a06aec9af2b8c9 Add Partner Supported taint flag to kAFS
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6b0e3a47ec436527a736c0e7159b41624d176dd9
- 6b0e3a47ec436527a736c0e7159b41624d176dd9 Add Partner Supported taint flag
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/3a4e2ad92c430d2f584f56ca686bc75a469d06c0
- 3a4e2ad92c430d2f584f56ca686bc75a469d06c0 kabi: Add kABI macros for enum type
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/04fbd46f834f3a012ca9d5bef91db377a3dbaed0
- 04fbd46f834f3a012ca9d5bef91db377a3dbaed0 kabi: expand and clarify documentation of aux structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cf8df8ef88e094ebb049a7e1e6fec069aaf54faa
- cf8df8ef88e094ebb049a7e1e6fec069aaf54faa kabi: introduce RH_KABI_USE_AUX_PTR
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/31779ca0c6c9aab28184a42ac3f17ac219b37b2b
- 31779ca0c6c9aab28184a42ac3f17ac219b37b2b kabi: rename RH_KABI_SIZE_AND_EXTEND to AUX
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2e12a05d339ed936b9cd59f420b161d70b4a130a
- 2e12a05d339ed936b9cd59f420b161d70b4a130a kabi: more consistent _RH_KABI_SIZE_AND_EXTEND
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b83556eebdc2efdc2d2c22610b7cd7c5cafb2bae
- b83556eebdc2efdc2d2c22610b7cd7c5cafb2bae kabi: use fixed field name for extended part
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4c9a3b306a34ed7017e35b0de26b2d98e1a04373
- 4c9a3b306a34ed7017e35b0de26b2d98e1a04373 kabi: fix dereference in RH_KABI_CHECK_EXT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a961660df0a73bcf2dcd8cb8855c2f5d5ded0ae9
- a961660df0a73bcf2dcd8cb8855c2f5d5ded0ae9 kabi: fix RH_KABI_SET_SIZE macro
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/9f9ef5e8b4694fa7fb6a8f941fb741121fe5aab3
- 9f9ef5e8b4694fa7fb6a8f941fb741121fe5aab3 kabi: expand and clarify documentation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/308d17beeaa6cb4a514f77319b636c9a2c15f5eb
- 308d17beeaa6cb4a514f77319b636c9a2c15f5eb kabi: make RH_KABI_USE replace any number of reserved fields
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f3d12dffffeee8d6692be46044b9fc8448901692
- f3d12dffffeee8d6692be46044b9fc8448901692 kabi: rename RH_KABI_USE2 to RH_KABI_USE_SPLIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/520e726b4e78101e73fa3d77cdcbc21d204a75a9
- 520e726b4e78101e73fa3d77cdcbc21d204a75a9 kabi: change RH_KABI_REPLACE2 to RH_KABI_REPLACE_SPLIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7160868bd40d04e6d1a80f55d1bf9bb62ede0ba3
- 7160868bd40d04e6d1a80f55d1bf9bb62ede0ba3 kabi: change RH_KABI_REPLACE_UNSAFE to RH_KABI_BROKEN_REPLACE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0b83063cf6c57dc20a80c35396fa425ec1963d53
- 0b83063cf6c57dc20a80c35396fa425ec1963d53 kabi: introduce RH_KABI_ADD_MODIFIER
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d276c2393792e3eec80a73a4fe964f9ec11145a7
- d276c2393792e3eec80a73a4fe964f9ec11145a7 kabi: Include kconfig.h
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/28c30de9c771ff91994c9f0a42bdcc260fa97c2d
- 28c30de9c771ff91994c9f0a42bdcc260fa97c2d kabi: macros for intentional kABI breakage
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/9b671c725ac69c47874321e5636e6541bb6d219d
- 9b671c725ac69c47874321e5636e6541bb6d219d kabi: fix the note about terminating semicolon
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6443eef17fb53f62886ecce519b6e12dd310e7f5
- 6443eef17fb53f62886ecce519b6e12dd310e7f5 kabi: introduce RH_KABI_HIDE_INCLUDE and RH_KABI_FAKE_INCLUDE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/47746fc3837b476ec265e2a0c2aaa86de0d3994e
- 47746fc3837b476ec265e2a0c2aaa86de0d3994e pci.h: Fix static include
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/67ce66385c6b619356c4030e6163c4fb18a50427
- 67ce66385c6b619356c4030e6163c4fb18a50427 drivers/pci/pci-driver.c: Fix if/ifdef typo
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0dfd7feeadc964ef2a9d118218b54831381c8d7a
- 0dfd7feeadc964ef2a9d118218b54831381c8d7a kernel/rh_taint.c: Update to new messaging
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/35e5ee153637e59c9297c9cc8ba7f3960277ffc2
- 35e5ee153637e59c9297c9cc8ba7f3960277ffc2 redhat: Add mark_driver_deprecated()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ff7aa8cae4c7e3e7bbc1bb5612efc2157c81fa7d
- ff7aa8cae4c7e3e7bbc1bb5612efc2157c81fa7d RHEL: disable io_uring support
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/517351ed810bf2707e7fdb2ab22029aeb594db59
- 517351ed810bf2707e7fdb2ab22029aeb594db59 bpf: Fix unprivileged_bpf_disabled setup
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/48fe2e5f40c901e92d1f8c62bc97f58af4b0906a
- 48fe2e5f40c901e92d1f8c62bc97f58af4b0906a nvme: nvme_mpath_init remove multipath check
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1c9bd09f303e2c9d2c67fdc46604d94e00cbf67c
- 1c9bd09f303e2c9d2c67fdc46604d94e00cbf67c wireguard: disable in FIPS mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/57872981891fe8f3f7205daa4b78c8c0d676b171
- 57872981891fe8f3f7205daa4b78c8c0d676b171 nvme: decouple basic ANA log page re-read support from native multipathing
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0561f5953431ff471193611cd73af65dd394c8cd
- 0561f5953431ff471193611cd73af65dd394c8cd nvme: allow local retry and proper failover for REQ_FAILFAST_TRANSPORT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f801483d711fa5f83a0f9d4c479eeba702d1d477
- f801483d711fa5f83a0f9d4c479eeba702d1d477 nvme: Return BLK_STS_TARGET if the DNR bit is set
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4f2bc09956ad4829d139e9d69b86ba8b9ebc66e2
- 4f2bc09956ad4829d139e9d69b86ba8b9ebc66e2 REDHAT: coresight: etm4x: Disable coresight on HPE Apollo 70
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/65a21d545cc43328ea00fdbd62e7b45f375adce8
- 65a21d545cc43328ea00fdbd62e7b45f375adce8 redhat: remove remaining references of CONFIG_RH_DISABLE_DEPRECATED
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1c1b5380b0b56d3be978997b128f84aeb9906656
- 1c1b5380b0b56d3be978997b128f84aeb9906656 arch/x86: Remove vendor specific CPU ID checks
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f7c032c856ba6379a77b76179d0352929d6039ec
- f7c032c856ba6379a77b76179d0352929d6039ec redhat: Replace hardware.redhat.com link in Unsupported message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/9a6eb49603959cf0aab0198e13946eaee07801c3
- 9a6eb49603959cf0aab0198e13946eaee07801c3 x86: Fix compile issues with rh_check_supported()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8a605436efddfa7dbc6e007b2881fa81f17968a5
- 8a605436efddfa7dbc6e007b2881fa81f17968a5 KEYS: Make use of platform keyring for module signature verify
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c7c191f662438423a23592db42838ff550c2bdda
- c7c191f662438423a23592db42838ff550c2bdda Input: rmi4 - remove the need for artificial IRQ in case of HID
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4ae139284600cd6fef133ce7a981485ea73381ab
- 4ae139284600cd6fef133ce7a981485ea73381ab ARM: tegra: usb no reset
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8156e2102f753bbe0f0dd222a5f232e7f3d99883
- 8156e2102f753bbe0f0dd222a5f232e7f3d99883 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/823e733a88ddd21c735288dd3b08348e79872b91
- 823e733a88ddd21c735288dd3b08348e79872b91 redhat: rh_kabi: deduplication friendly structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/61d2a751fe1b1305684d6c1899f26fa9e38ac0a9
- 61d2a751fe1b1305684d6c1899f26fa9e38ac0a9 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7d09cb3ea3dd2f3cda5a6a31be429f259106ca61
- 7d09cb3ea3dd2f3cda5a6a31be429f259106ca61 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c0c51c6f123df02948e11680d9b90324593ba547
- c0c51c6f123df02948e11680d9b90324593ba547 redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/96b20c70b39cd28efcec2336417cb0db9ff7853c
- 96b20c70b39cd28efcec2336417cb0db9ff7853c redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/198030a81d85dbac8f4030e69d3d376327433487
- 198030a81d85dbac8f4030e69d3d376327433487 redhat: rh_kabi: Add macros to size and extend structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/695af00ed9e393abe88d9ee4de3702c15ded186d
- 695af00ed9e393abe88d9ee4de3702c15ded186d Removing Obsolete hba pci-ids from rhel8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/736038bd8039d1543468c1dc8925f20929645804
- 736038bd8039d1543468c1dc8925f20929645804 mptsas: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/83cdf2924bdcc90c433a58129b4501e10b1295dc
- 83cdf2924bdcc90c433a58129b4501e10b1295dc mptspi: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0b634d81ed7f0730e13d720508dbaa6ab94e54d2
- 0b634d81ed7f0730e13d720508dbaa6ab94e54d2 qla2xxx: Remove PCI IDs of deprecated adapter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0d11491f9e7fe0c8c301db3256cb47c66ae8450f
- 0d11491f9e7fe0c8c301db3256cb47c66ae8450f hpsa: remove old cciss-based smartarray pci ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/75f69a4f7b8f9d38c5efb0231186ed8726e526f2
- 75f69a4f7b8f9d38c5efb0231186ed8726e526f2 kernel: add SUPPORT_REMOVED kernel taint
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/50081b0865239d853d77bc71e54d13fad8bac9f0
- 50081b0865239d853d77bc71e54d13fad8bac9f0 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/dc84f3cc1b19a0524e58a382c382f34081dc6c35
- dc84f3cc1b19a0524e58a382c382f34081dc6c35 s390: Lock down the kernel when the IPL secure flag is set
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cb55378c04d6516f303e98061ec7ddd6563429a8
- cb55378c04d6516f303e98061ec7ddd6563429a8 efi: Lock down the kernel if booted in secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/9b06e1f07c3cc9e1d0533b8615426d4d5d9e4ebb
- 9b06e1f07c3cc9e1d0533b8615426d4d5d9e4ebb efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/db249925c6802b38d910927e4d032af1e00bee56
- db249925c6802b38d910927e4d032af1e00bee56 security: lockdown: expose a hook to lock the kernel down
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f9604bcd305aba2a94e713ee758a51143687ae9f
- f9604bcd305aba2a94e713ee758a51143687ae9f Make get_cert_list() use efi_status_to_str() to print error messages.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b75eb3e922c93d78d4190a759f5725e856d35439
- b75eb3e922c93d78d4190a759f5725e856d35439 Add efi_status_to_str() and rework efi_status_to_err().
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2f80042d6b8199fceadf3623243402066e0cd4ea
- 2f80042d6b8199fceadf3623243402066e0cd4ea Add support for deprecating processors
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5a3b4f5754788e42db8ed550b359382b600f2b08
- 5a3b4f5754788e42db8ed550b359382b600f2b08 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/36cd5d0a0aa0a3be8ac385ca8991563c9e58227f
- 36cd5d0a0aa0a3be8ac385ca8991563c9e58227f iommu/arm-smmu: workaround DMA mode issues
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ca34010e072550c8d5ea57f9436bab254c3521cc
- ca34010e072550c8d5ea57f9436bab254c3521cc rh_kabi: introduce RH_KABI_EXCLUDE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/26054e2c4e2253fe955a351971dc6b931cb68961
- 26054e2c4e2253fe955a351971dc6b931cb68961 ipmi: do not configure ipmi for HPE m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/9cb0f734492a21a7e506d7145caf143ccd927b2a
- 9cb0f734492a21a7e506d7145caf143ccd927b2a kABI: Add generic kABI macros to use for kABI workarounds
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4960e5ee4a0e9bb28e512eb35cfa633ac4552049
- 4960e5ee4a0e9bb28e512eb35cfa633ac4552049 add pci_hw_vendor_status()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/291c4e2878431fd6937c5b9248babe8ec8d4233e
- 291c4e2878431fd6937c5b9248babe8ec8d4233e ahci: thunderx2: Fix for errata that affects stop engine
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/996869cc0b3e78cb9182a4ebced2c46ee2774935
- 996869cc0b3e78cb9182a4ebced2c46ee2774935 Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c1c7a887998ab12c5a1180c4bca3b41c31fe4aa6
- c1c7a887998ab12c5a1180c4bca3b41c31fe4aa6 bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e40c9d10474d1a5b5f7f01175a72ba4a3c7f5e8e
- e40c9d10474d1a5b5f7f01175a72ba4a3c7f5e8e add Red Hat-specific taint flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/f23f446b724fbb79c1e09a278fcb427fc29c0c05
- f23f446b724fbb79c1e09a278fcb427fc29c0c05 tags.sh: Ignore redhat/rpm
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a68aa65a20fba1908a7326e5321ce8bc39a9ae14
- a68aa65a20fba1908a7326e5321ce8bc39a9ae14 put RHEL info into generated headers
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/80937f1973d73fccdc75db4026fbed7cba16f489
- 80937f1973d73fccdc75db4026fbed7cba16f489 aarch64: acpi scan: Fix regression related to X-Gene UARTs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/3362fd10fe075b48ff8af023da5643bc9477a4c6
- 3362fd10fe075b48ff8af023da5643bc9477a4c6 ACPI / irq: Workaround firmware issue on X-Gene based m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ffc66b174954abecfb360dcc3b98c3139ef12d96
- ffc66b174954abecfb360dcc3b98c3139ef12d96 modules: add rhelversion MODULE_INFO tag
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7e469c23b8f648d79e8a0e82ee41cda0e50b2f19
- 7e469c23b8f648d79e8a0e82ee41cda0e50b2f19 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a0f49117d038de2d4db4940f5f039addb2f7231d
- a0f49117d038de2d4db4940f5f039addb2f7231d Add Red Hat tainting
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/fa67c16e780ed355f9847da90e8055ad1175c238
- fa67c16e780ed355f9847da90e8055ad1175c238 Introduce CONFIG_RH_DISABLE_DEPRECATED
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e7e1371803470a7840dc61da628cb912834ec149
- e7e1371803470a7840dc61da628cb912834ec149 Pull the RHEL version defines out of the Makefile
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/84d1d3e3d0c2c7ed1f571c8495bad3b4d97cfa8e
- 84d1d3e3d0c2c7ed1f571c8495bad3b4d97cfa8e [initial commit] Add Red Hat variables in the top level makefile
-

README.rst

@@ -1,25 +0,0 @@
-===================
-The Kernel dist-git
-===================
-
-The kernel is maintained in a `source tree`_ rather than directly in dist-git.
-The specfile is maintained as a `template`_ in the source tree along with a set
-of build scripts to generate configurations, (S)RPMs, and to populate the
-dist-git repository.
-
-The `documentation`_ for the source tree covers how to contribute and maintain
-the tree.
-
-If you're looking for the downstream patch set it's available in the source
-tree with "git log master..ark-patches" or
-`online`_.
-
-Each release in dist-git is tagged in the source repository so you can easily
-check out the source tree for a build. The tags are in the format
-name-version-release, but note release doesn't contain the dist tag since the
-source can be built in different build roots (Fedora, CentOS, etc.)
-
-.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
-.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
-.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
-.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

check-kabi

@@ -1,166 +0,0 @@
-#!/usr/bin/python3
-#
-# check-kabi - Red Hat kABI reference checking tool
-#
-# We use this script to check against reference Module.kabi files.
-#
-# Author: Jon Masters <jcm@redhat.com>
-# Copyright (C) 2007-2009 Red Hat, Inc.
-#
-# This software may be freely redistributed under the terms of the GNU
-# General Public License (GPL).
-
-# Changelog:
-#
-# 2018/06/01 - Update for python3 by Petr Oros.
-# 2009/08/15 - Updated for use in RHEL6.
-# 2007/06/13 - Initial rewrite in python by Jon Masters.
-
-__author__ = "Jon Masters <jcm@redhat.com>"
-__version__ = "2.0"
-__date__ = "2009/08/15"
-__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
-__license__ = "GPL"
-
-import getopt
-import string
-import sys
-
-true = 1
-false = 0
-
-
-def load_symvers(symvers, filename):
-    """Load a Module.symvers file."""
-
-    symvers_file = open(filename, "r")
-
-    while true:
-        in_line = symvers_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type, *ns = in_line.split()
-        ns = ns[0] if ns else None
-
-        symvers[symbol] = in_line[0:-1]
-
-
-def load_kabi(kabi, filename):
-    """Load a Module.kabi file."""
-
-    kabi_file = open(filename, "r")
-
-    while true:
-        in_line = kabi_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type, *ns = in_line.split()
-        ns = ns[0] if ns else None
-
-        kabi[symbol] = in_line[0:-1]
-
-
-def check_kabi(symvers, kabi):
-    """Check Module.kabi and Module.symvers files."""
-
-    fail = 0
-    warn = 0
-    changed_symbols = []
-    moved_symbols = []
-    ns_symbols = []
-
-    for symbol in kabi:
-        abi_hash, abi_sym, abi_dir, abi_type, *abi_ns = kabi[symbol].split()
-        abi_ns = abi_ns[0] if abi_ns else None
-        if symbol in symvers:
-            sym_hash, sym_sym, sym_dir, sym_type, *sym_ns = symvers[symbol].split()
-            sym_ns = sym_ns[0] if sym_ns else None
-            if abi_hash != sym_hash:
-                fail = 1
-                changed_symbols.append(symbol)
-
-            if abi_dir != sym_dir:
-                warn = 1
-                moved_symbols.append(symbol)
-
-            if abi_ns != sym_ns:
-                warn = 1
-                ns_symbols.append(symbol)
-        else:
-            fail = 1
-            changed_symbols.append(symbol)
-
-    if fail:
-        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
-        print("")
-        print("The following symbols have been changed (this will cause an ABI breakage):")
-        print("")
-        for symbol in changed_symbols:
-            print(symbol)
-        print("")
-
-    if warn:
-        print("*** WARNING - ABI SYMBOLS MOVED ***")
-        if moved_symbols:
-            print("")
-            print("The following symbols moved (typically caused by moving a symbol from being")
-            print("provided by the kernel vmlinux out to a loadable module):")
-            print("")
-            for symbol in moved_symbols:
-                print(symbol)
-            print("")
-        if ns_symbols:
-            print("")
-            print("The following symbols changed symbol namespaces:")
-            print("")
-            for symbol in ns_symbols:
-                print(symbol)
-            print("")
-
-    """Halt the build, if we got errors and/or warnings. In either case,
-       double-checkig is required to avoid introducing / concealing
-       KABI inconsistencies."""
-    if fail or warn:
-        sys.exit(1)
-    sys.exit(0)
-
-
-def usage():
-    print("""
-check-kabi: check Module.kabi and Module.symvers files.
-
-    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
-
-""")
-
-
-if __name__ == "__main__":
-
-    symvers_file = ""
-    kabi_file = ""
-
-    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
-
-    for o, v in opts:
-        if o == "-s":
-            symvers_file = v
-        if o == "-h":
-            usage()
-            sys.exit(0)
-        if o == "-k":
-            kabi_file = v
-
-    if (symvers_file == "") or (kabi_file == ""):
-        usage()
-        sys.exit(1)
-
-    symvers = {}
-    kabi = {}
-
-    load_symvers(symvers, symvers_file)
-    load_kabi(kabi, kabi_file)
-    check_kabi(symvers, kabi)

def_variants.yaml.fedora

@@ -1,467 +0,0 @@
-packages:
-  - name: modules-core
-    depends-on: []
-  - name: modules
-    depends-on:
-    - modules-core
-  - name: modules-internal
-    depends-on:
-    - modules-core
-    - modules
-  - name: modules-extra
-    depends-on:
-    - modules-core
-    - modules
-
-
-rules:
-  - .*kunit.*: modules-internal
-    exact_pkg: True
-  - .*test[^/]*.ko: modules-internal
-
-  - arch/.*: modules-core
-  - crypto/.*: modules-core
-
-  - drivers/accel/.*: modules-core
-  - drivers/accessibility/.*: modules-core
-  - drivers/acpi/video.*: modules
-  - drivers/acpi/.*: modules-core
-  - drivers/ata/.*: modules-core
-
-  - drivers/base/regmap/regmap-sdw.*: modules
-  - drivers/base/.*: modules-core
-  - drivers/block/floppy.*: modules-extra
-  - drivers/block/rnbd.*: modules
-  - drivers/block/.*: modules-core
-  - drivers/bus/.*: modules-core
-
-  - drivers/cdx/.*: modules-core
-  - drivers/char/mwave.*: modules
-  - drivers/char/.*: modules-core
-  - drivers/clk/.*: modules-core
-  - drivers/counter/.*: modules-core
-  - drivers/cpufreq/.*: modules-core
-  - drivers/crypto/caam/.*: modules
-  - drivers/crypto/cavium/.*: modules
-  - drivers/crypto/chelsio/.*: modules
-  - drivers/crypto/hisilicon/.*: modules
-  - drivers/crypto/marvell/.*: modules
-  - drivers/crypto/.*: modules-core
-  - drivers/cxl/.*: modules-core
-
-  - drivers/dax/.*: modules-core
-  - drivers/dca/.*: modules-core
-  - drivers/devfreq/.*: modules-core
-  - drivers/dma/.*: modules-core
-
-  - drivers/edac/.*: modules-core
-  - drivers/extcon/.*: modules-core
-
-  - drivers/firmware/iscsi_ibft.*: modules
-  - drivers/firmware/.*: modules-core
-  - drivers/fsi/.*: modules-core
-
-  - drivers/gnss/.*: modules-core
-  - drivers/gpio/gpio-dln2.*: modules-extra
-  - drivers/gpio/gpio-ljca.*: modules
-  - drivers/gpio/.*: modules-core
-  - drivers/gpu/drm/display/drm_.*: modules-core
-  - drivers/gpu/drm/drm.*: modules-core
-  - drivers/gpu/drm/etnaviv/.*: modules-core
-  - drivers/gpu/drm/gud/.*: modules-core
-  - drivers/gpu/drm/hyperv/.*: modules-core
-  - drivers/gpu/drm/imagination/.*: modules-core
-  - drivers/gpu/drm/lima/.*: modules-core
-  - drivers/gpu/drm/mxsfb/.*: modules-core
-  - drivers/gpu/drm/panfrost/.*: modules-core
-  - drivers/gpu/drm/qxl/.*: modules-core
-  - drivers/gpu/drm/scheduler/.*: modules-core
-  - drivers/gpu/drm/solomon/.*: modules-core
-  - drivers/gpu/drm/tidss/.*: modules-core
-  - drivers/gpu/drm/tiny/.*: modules-core
-  - drivers/gpu/drm/ttm/.*: modules-core
-  - drivers/gpu/drm/udl/.*: modules-core
-  - drivers/gpu/drm/v3d/.*: modules-core
-  - drivers/gpu/drm/vgem/.*: modules-core
-  - drivers/gpu/drm/virtio/.*: modules-core
-  - drivers/gpu/drm/vkms/.*: modules-core
-  - drivers/gpu/drm/vmwgfx/.*: modules-core
-  - drivers/gpu/drm/xlnx/.*: modules-core
-  - drivers/gpu/host1x/.*: modules-core
-
-  - drivers/hid/hid-asus.*: modules
-  - drivers/hid/hid-nintendo.*: modules
-  - drivers/hid/hid-picolcd.*: modules
-  - drivers/hid/hid-playstation.*: modules
-  - drivers/hid/surface-hid.*: modules
-  - drivers/hid/hid-prodikeys.*: modules
-  - drivers/hid/.*: modules-core
-  - drivers/hte/.*: modules-core
-  - drivers/hv/.*: modules-core
-  - drivers/hwmon/asus_wmi_sensors.*: modules
-  - drivers/hwmon/dell-smm-hwmon.*: modules
-  - drivers/hwmon/hp-wmi-sensors.*: modules
-  - drivers/hwmon/intel-m10-bmc-hwmon.*: modules
-  - drivers/hwmon/nct6775.*: modules
-  - drivers/hwmon/.*: modules-core
-  - drivers/hwspinlock/.*: modules-core
-  - drivers/hwtracing/.*: modules-core
-
-  - drivers/i2c/busses/i2c-dln2.*: modules-extra
-  - drivers/i2c/busses/i2c-ljca.*: modules
-  - drivers/i2c/.*: modules-core
-  - drivers/i3c/.*: modules-core
-  - drivers/iio/adc/dln2-adc.*: modules-extra
-  - drivers/iio/accel/.*: modules
-  - drivers/iio/common/cros_ec_sensors/.*: modules
-  - drivers/iio/light/.*: modules
-  - drivers/iio/pressure/.*: modules
-  - drivers/iio/proximity/.*: modules
-  - drivers/iio/.*: modules-core
-  - drivers/input/gameport/.*: modules
-  - drivers/input/joystick/.*: modules-extra
-  - drivers/input/misc/pcspkr.*: modules-extra
-  - drivers/input/tablet/.*: modules
-  - drivers/input/touchscreen/.*: modules
-  - drivers/input/.*: modules-core
-  - drivers/interconnect/.*: modules-core
-  - drivers/iommu/.*: modules-core
-  - drivers/irqchip/.*: modules-core
-
-  - drivers/mailbox/.*: modules-core
-  - drivers/md/.*: modules-core
-  - drivers/memory/dfl-emif.*: modules
-  - drivers/memory/.*: modules-core
-  - drivers/message/fusion/mptctl.*: modules-extra
-  - drivers/message/fusion/mptfc.*: modules-extra
-  - drivers/message/fusion/.*: modules
-  - drivers/message/.*: modules-core
-  - drivers/mfd/dln2.*: modules-extra
-  - drivers/misc/.*: modules-core
-  - drivers/mux/.*: modules-core
-
-  - drivers/net/amt.ko: modules-core
-  - drivers/net/bareudp.ko: modules-core
-  - drivers/net/bonding/.*: modules-core
-  - drivers/net/can/slcan/slcan.*: modules-extra
-  - drivers/net/can/usb/ems_usb.*: modules-extra
-  - drivers/net/can/vcan.*: modules-extra
-  - drivers/net/dummy.ko: modules-core
-  - drivers/net/eql.ko: modules-core
-
-  - drivers/net/ethernet/8390/.*: modules-core
-  - drivers/net/ethernet/adi/.*: modules-core
-  - drivers/net/ethernet/agere/.*: modules-core
-  - drivers/net/ethernet/altera/.*: modules-core
-  - drivers/net/ethernet/amazon/.*: modules-core
-  - drivers/net/ethernet/amd/.*: modules-core
-  - drivers/net/ethernet/apm/.*: modules-core
-  - drivers/net/ethernet/asix/.*: modules-core
-  - drivers/net/ethernet/brocade/.*: modules-core
-  - drivers/net/ethernet/cavium/.*: modules-core
-  - drivers/net/ethernet/dnet.ko: modules-core
-  - drivers/net/ethernet/engleder/.*: modules-core
-  - drivers/net/ethernet/ethoc.ko: modules-core
-  - drivers/net/ethernet/fealnx.ko: modules-core
-  - drivers/net/ethernet/freescale/.*: modules-core
-  - drivers/net/ethernet/fungible/.*: modules-core
-  - drivers/net/ethernet/google/.*: modules-core
-  - drivers/net/ethernet/hisilicon/.*: modules-core
-  - drivers/net/ethernet/ibm/.*: modules-core
-  - drivers/net/ethernet/intel/.*: modules-core
-  - drivers/net/ethernet/jme.ko: modules-core
-  - drivers/net/ethernet/litex/.*: modules-core
-  - drivers/net/ethernet/mellanox/.*: modules-core
-  - drivers/net/ethernet/microsoft/.*: modules-core
-  - drivers/net/ethernet/natsemi/.*: modules-core
-  - drivers/net/ethernet/netronome/.*: modules-core
-  - drivers/net/ethernet/pensando/.*: modules-core
-  - drivers/net/ethernet/rocker/rocker.*: modules-internal
-  - drivers/net/ethernet/qualcomm/.*: modules-core
-  - drivers/net/ethernet/realtek/.*: modules-core
-  - drivers/net/ethernet/renesas/.*: modules-core
-  - drivers/net/ethernet/socionext/.*: modules-core
-  - drivers/net/ethernet/vertexcom/.*: modules-core
-  - drivers/net/ethernet/wangxun/.*: modules-core
-  - drivers/net/ethernet/xilinx/.*: modules-core
-
-  - drivers/net/fjes/.*: modules-core
-  - drivers/net/geneve.ko: modules-core
-  - drivers/net/gtp.ko: modules-core
-  - drivers/net/hamradio/.*: modules-extra
-  - drivers/net/hyperv/.*: modules-core
-  - drivers/net/ifb.ko: modules-core
-  - drivers/net/ipa/.*: modules-core
-  - drivers/net/ipvlan/.*: modules-core
-  - drivers/net/macsec.ko: modules-core
-  - drivers/net/macvlan.ko: modules-core
-  - drivers/net/macvtap.ko: modules-core
-  - drivers/net/mctp/.*: modules-core
-  - drivers/net/mdio.*: modules-core
-  - drivers/net/mhi_net.ko: modules-core
-  - drivers/net/mii.ko: modules-core
-  - drivers/net/net_failover.ko: modules-core
-  - drivers/net/netdevsim/netdevsim.*: modules-internal
-  - drivers/net/netconsole.ko: modules-core
-  - drivers/net/nlmon.ko: modules-core
-  - drivers/net/pcs/.*: modules-core
-  - drivers/net/phy/.*: modules-core
-  - drivers/net/rionet.ko: modules-core
-  - drivers/net/slip/slip.*: modules-extra
-  - drivers/net/sungem_phy.ko: modules-core
-  - drivers/net/tap.ko: modules-core
-  - drivers/net/team/.*: modules-core
-  - drivers/net/thunderbolt/.*: modules-core
-  - drivers/net/tun.ko: modules-core
-  - drivers/net/veth.ko: modules-core
-  - drivers/net/virtio_net.ko: modules-core
-  - drivers/net/vmxnet3/.*: modules-core
-  - drivers/net/vrf.ko: modules-core
-  - drivers/net/vsockmon.ko: modules-core
-  - drivers/net/vxlan/.*: modules-core
-  - drivers/net/wireguard/.*: modules-core
-  - drivers/net/wireless/virtual/mac80211_hwsim.*: modules-internal
-  - drivers/net/wwan/wwan_hwsim.*: modules-internal
-  - drivers/net/wwan/.*: modules-core
-  - drivers/net/xen.*: modules-core
-
-  - drivers/nvdimm/.*: modules-core
-  - drivers/nvme/host/nvme-rdma.*: modules
-  - drivers/nvme/target/nvmet-rdma.*: modules
-  - drivers/nvme/.*: modules-core
-  - drivers/nvmem/nvmem_u-boot-env.*: modules
-  - drivers/nvmem/.*: modules-core
-
-  - drivers/parport/parport_serial.*: modules
-  - drivers/parport/.*: modules-core
-  - drivers/pci/pcie/aer_inject.*: modules-extra
-  - drivers/pci/.*: modules-core
-  - drivers/perf/.*: modules-core
-  - drivers/phy/.*: modules-core
-  - drivers/pinctrl/.*: modules-core
-  - drivers/pmdomain/.*: modules-core
-  - drivers/powercap/intel_rapl_tpmi.*: modules
-  - drivers/powercap/.*: modules-core
-  - drivers/pps/.*: modules-core
-  - drivers/ptp/ptp_mock.*: modules-internal
-  - drivers/ptp/ptp_dfl_tod.*: modules
-  - drivers/ptp/.*: modules-core
-  - drivers/pwm/.*: modules-core
-
-  - drivers/rapidio/.*: modules-core
-  - drivers/regulator/arizona-micsupp.*: modules
-  - drivers/regulator/.*: modules-core
-  - drivers/remoteproc/.*: modules-core
-  - drivers/reset/.*: modules-core
-  - drivers/rpmsg/.*: modules-core
-  - drivers/rtc/.*: modules-core
-
-  - drivers/s390/.*: modules-core
-
-  - drivers/scsi/3w.*: modules-core
-  - drivers/scsi/BusLogic.ko: modules-core
-  - drivers/scsi/a100u2w.ko: modules-core
-  - drivers/scsi/advansys.ko: modules-core
-  - drivers/scsi/am53c974.ko: modules-core
-  - drivers/scsi/arcmsr.*: modules-core
-  - drivers/scsi/atp870u.ko: modules-core
-  - drivers/scsi/ch.ko: modules-core
-  - drivers/scsi/cxlflash/.*: modules-core
-  - drivers/scsi/dc395x.ko: modules-core
-  - drivers/scsi/device_handler/.*: modules-core
-  - drivers/scsi/dmx3191d.ko: modules-core
-  - drivers/scsi/elx/.*: modules-core
-  - drivers/scsi/esp_scsi.ko: modules-core
-  - drivers/scsi/fdomain.*: modules-core
-  - drivers/scsi/hpsa.ko: modules-core
-  - drivers/scsi/hptiop.ko: modules-core
-  - drivers/scsi/hv_storvsc.ko: modules-core
-  - drivers/scsi/ibmvscsi.*: modules-core
-  - drivers/scsi/initio.ko: modules-core
-  - drivers/scsi/ipr.ko: modules-core
-  - drivers/scsi/ips.ko: modules-core
-  - drivers/scsi/iscsi_tcp.ko: modules-core
-  - drivers/scsi/libfc/.*: modules-core
-  - drivers/scsi/libiscsi.*: modules-core
-  - drivers/scsi/mpi3mr/.*: modules-core
-  - drivers/scsi/mvumi.ko: modules-core
-  - drivers/scsi/myrb.ko: modules-core
-  - drivers/scsi/myrs.ko: modules-core
-  - drivers/scsi/raid_class.ko: modules-core
-  - drivers/scsi/scsi_debug.ko: modules-core
-  - drivers/scsi/scsi_transport_.*: modules-core
-  - drivers/scsi/ses.ko: modules-core
-  - drivers/scsi/smartpqi/.*: modules-core
-  - drivers/scsi/snic/.*: modules-core
-  - drivers/scsi/st.ko: modules-core
-  - drivers/scsi/stex.ko: modules-core
-  - drivers/scsi/virtio_scsi.ko: modules-core
-  - drivers/scsi/vmw_pvscsi.ko: modules-core
-  - drivers/scsi/wd719x.ko: modules-core
-  - drivers/scsi/xen-scsifront.ko: modules-core
-
-  - drivers/slimbus/.*: modules-core
-  - drivers/soc/.*: modules-core
-  - drivers/spi/spi-altera-dfl.*: modules
-  - drivers/spi/spi-dln2.*: modules-extra
-  - drivers/spi/spi-ljca.*: modules
-  - drivers/spi/.*: modules-core
-  - drivers/spmi/.*: modules-core
-
-  - drivers/target/iscsi/cxgbit/cxgbit.*: modules
-  - drivers/target/sbp/sbp_target.*: modules
-  - drivers/target/target_core_user.*: modules
-  - drivers/target/.*: modules-core
-  - drivers/tee/.*: modules-core
-  - drivers/thermal/intel/int340x_thermal/int3406_thermal.*: modules
-  - drivers/thermal/.*: modules-core
-  - drivers/thunderbolt/.*: modules-core
-
-  - drivers/ufs/.*: modules-core
-  - drivers/usb/atm/.*: modules
-  - drivers/usb/gadget/function/usb_f_midi2.*: modules
-  - drivers/usb/image/.*: modules
-  - drivers/usb/misc/trancevibrator.*: modules-extra
-  - drivers/usb/misc/.*: modules
-  - drivers/usb/serial/.*: modules
-  - drivers/usb/typec/mux/nb7vpq904m.*: modules
-  - drivers/usb/usbip/.*: modules-extra
-  - drivers/usb/.*: modules-core
-
-  - drivers/vdpa/mlx5/mlx5_vdpa.*: modules
-  - drivers/vdpa/pds/pds_vdpa.*: modules
-  - drivers/vdpa/.*: modules-core
-  - drivers/vfio/pci/mlx5/mlx5-vfio-pci.*: modules
-  - drivers/vfio/pci/pds/pds-vfio-pc.*: modules
-  - drivers/vfio/.*: modules-core
-  - drivers/vhost/.*: modules-core
-  - drivers/video/backlight/apple_bl.*: modules
-  - drivers/video/.*: modules-core
-  - drivers/virt/.*: modules-core
-  - drivers/virtio/.*: modules-core
-
-  - drivers/watchdog/iTCO_wdt.*: modules
-  - drivers/watchdog/.*: modules-core
-
-  - drivers/xen/.*: modules-core
-
-  - drivers/w1/masters/ds2482.*: modules-extra
-  - drivers/w1/masters/ds2490.*: modules-extra
-  - drivers/w1/slaves/w1_ds2408.*: modules-extra
-  - drivers/w1/slaves/w1_ds2423.*: modules-extra
-  - drivers/w1/slaves/w1_ds2431.*: modules-extra
-  - drivers/w1/slaves/w1_ds2433.*: modules-extra
-  - drivers/w1/slaves/w1_ds2780.*: modules-extra
-  - drivers/w1/slaves/w1_ds2781.*: modules-extra
-  - drivers/w1/slaves/w1_ds28e04.*: modules-extra
-  - drivers/w1/slaves/w1_smem.*: modules-extra
-  - drivers/w1/slaves/w1_therm.*: modules-extra
-
-  - fs/9p/.*: modules-core
-  - fs/afs/.*: modules-core
-  - fs/affs/affs.*: modules-extra
-  - fs/bcachefs/.*: modules-core
-  - fs/befs/befs.*: modules-extra
-  - fs/binfmt_misc.ko: modules-core
-  - fs/cachefiles/.*: modules-core
-  - fs/ceph/.*: modules-core
-  - fs/coda/coda.*: modules-extra
-  - fs/dlm/.*: modules-extra
-  - fs/erofs/.*: modules-core
-  - fs/exfat/.*: modules-core
-  - fs/f2fs/.*: modules-core
-  - fs/fat/.*: modules-core
-  - fs/fuse/cuse.*: modules-extra
-  - fs/fuse/.*: modules-core
-  - fs/gfs2/.*: modules-extra
-  - fs/isofs/.*: modules-core
-  - fs/lockd/.*: modules-core
-  - fs/netfs/.*: modules-core
-  - fs/nfs.*: modules-core
-  - fs/nilfs2/nilfs2.*: modules-extra
-  - fs/nls/.*: modules-core
-  - fs/ntfs3/.*: modules-core
-  - fs/ocfs2/.*: modules-extra
-  - fs/orangefs/.*: modules-core
-  - fs/overlayfs/.*: modules-core
-  - fs/pstore/.*: modules-core
-  - fs/smb/.*: modules-core
-  - fs/squashfs/.*: modules-core
-  - fs/sysv/.*: modules-extra
-  - fs/ubifs/.*: modules-extra
-  - fs/udf/.*: modules-core
-  - fs/ufs/.*: modules-extra
-  - fs/vboxsf/.*: modules-core
-  - fs/xfs/.*: modules-core
-  - fs/zonefs/.*: modules-core
-
-  - kernel/locking/locktorture.*: modules-internal
-  - kernel/rcu/rcuscale.*: modules-internal
-  - kernel/rcu/rcutorture.*: modules-internal
-  - kernel/rcu/refscale.*: modules-internal
-  - kernel/scftorture.*: modules-internal
-  - kernel/torture.*: modules-internal
-  - kernel/.*: modules-core
-
-  - lib/.*: modules-core
-
-  - net/802/.*: modules-core
-  - net/8021q/.*: modules-core
-  - net/9p/9pnet_rdma.ko: modules
-  - net/9p/.*: modules-core
-  - net/appletalk/appletalk.*: modules-extra
-  - net/atm/br2684.*: modules-extra
-  - net/atm/clip.*: modules-extra
-  - net/atm/lec.*: modules-extra
-  - net/atm/pppoatm.*: modules-extra
-  - net/ax25/ax25.*: modules-extra
-  - net/batman-adv/batman-adv.*: modules-extra
-  - net/bridge/.*: modules-core
-  - net/ceph/.*: modules-core
-  - net/core/pktgen.*: modules-internal
-  - net/core/.*: modules-core
-  - net/dns_resolver/.*: modules-core
-  - net/hsr/.*: modules-core
-  - net/ife/.*: modules-core
-  - net/ipv4/tcp_bic.*: modules-extra
-  - net/ipv4/tcp_highspeed.*: modules-extra
-  - net/ipv4/tcp_htcp.*: modules-extra
-  - net/ipv4/tcp_hybla.*: modules-extra
-  - net/ipv4/tcp_illinois.*: modules-extra
-  - net/ipv4/tcp_lp.*: modules-extra
-  - net/ipv4/tcp_scalable.*: modules-extra
-  - net/ipv4/tcp_vegas.*: modules-extra
-  - net/ipv4/tcp_veno.*: modules-extra
-  - net/ipv4/tcp_westwood.*: modules-extra
-  - net/ipv4/tcp_yeah.*: modules-extra
-  - net/ipv4/.*: modules-core
-  - net/ipv6/.*: modules-core
-  - net/iucv/.*: modules-core
-  - net/kcm/.*: modules-core
-  - net/key/.*: modules-core
-  - net/l2tp/l2tp_debugfs.*: modules-extra
-  - net/l2tp/l2tp_eth.*: modules-extra
-  - net/l2tp/l2tp_netlink.*: modules-extra
-  - net/l2tp/l2tp_ppp.*: modules-extra
-  - net/llc/.*: modules-core
-  - net/netfilter/.*: modules-core
-  - net/netrom/netrom.*: modules-extra
-  - net/nsh/.*: modules-core
-  - net/openvswitch/.*: modules-core
-  - net/psample/.*: modules-core
-  - net/qrtr/.*: modules-core
-  - net/rds/rds.*: modules-extra
-  - net/rose/rose.*: modules-extra
-  - net/rxrpc/.*: modules-core
-  - net/sched/.*: modules-core
-  - net/sunrpc/xprtrdma/rpcrdma.*: modules
-  - net/sunrpc/.*: modules-core
-  - net/tipc/.*: modules-core
-  - net/tls/.*: modules-core
-  - net/vmw_vsock/.*: modules-core
-  - net/xdp/.*: modules-core
-  - net/xfrm/.*: modules-core
-
-  - virt/.*: modules-core
-
-  - default: modules

def_variants.yaml.rhel

@@ -1,486 +0,0 @@
-packages:
-  - name: modules-core
-    depends-on: []
-  - name: modules
-    depends-on:
-    - modules-core
-  - name: modules-internal
-    depends-on:
-    - modules-core
-    - modules
-  - name: modules-extra
-    depends-on:
-    - modules-core
-    - modules
-  - name: modules-partner
-    depends-on:
-    - modules-core
-    - modules
-
-rules:
-  - .*kunit.*: modules-internal
-    exact_pkg: True
-  - .*test[^/]*.ko: modules-internal
-
-  - arch/.*: modules-core
-  - block/t10-pi.ko: modules-core
-  - crypto/.*: modules-core
-
-  - drivers/accel/.*: modules-core
-  - drivers/accessibility/.*: modules-core
-  - drivers/acpi/video.*: modules
-  - drivers/acpi/.*: modules-core
-  - drivers/ata/.*: modules-core
-
-  - drivers/base/regmap/regmap-sdw.*: modules
-  - drivers/base/.*: modules-core
-  - drivers/block/floppy.*: modules-extra
-  - drivers/block/rnbd.*: modules
-  - drivers/block/.*: modules-core
-  - drivers/bus/.*: modules-core
-
-  - drivers/cdrom/.*: modules-core
-  - drivers/cdx/.*: modules-core
-  - drivers/char/mwave.*: modules
-  - drivers/char/.*: modules-core
-  - drivers/clk/.*: modules-core
-  - drivers/counter/.*: modules-core
-  - drivers/cpufreq/amd-pstate-ut.ko: modules-internal
-  - drivers/cpufreq/.*: modules-core
-  - drivers/crypto/caam/.*: modules
-  - drivers/crypto/cavium/.*: modules
-  - drivers/crypto/chelsio/.*: modules
-  - drivers/crypto/hisilicon/.*: modules
-  - drivers/crypto/marvell/.*: modules
-  - drivers/crypto/.*: modules-core
-  - drivers/cxl/.*: modules-core
-
-  - drivers/dax/.*: modules-core
-  - drivers/dca/.*: modules-core
-  - drivers/devfreq/.*: modules-core
-  - drivers/dma/.*: modules-core
-
-  - drivers/edac/.*: modules-core
-  - drivers/extcon/.*: modules-core
-
-  - drivers/firmware/iscsi_ibft.*: modules
-  - drivers/firmware/.*: modules-core
-  - drivers/fsi/.*: modules-core
-
-  - drivers/gnss/.*: modules-core
-  - drivers/gpio/gpio-dln2.*: modules-extra
-  - drivers/gpio/gpio-ljca.*: modules
-  - drivers/gpio/.*: modules-core
-  - drivers/gpu/drm/display/drm_.*: modules-core
-  - drivers/gpu/drm/drm.*: modules-core
-  - drivers/gpu/drm/etnaviv/.*: modules-core
-  - drivers/gpu/drm/gud/.*: modules-core
-  - drivers/gpu/drm/hyperv/.*: modules-core
-  - drivers/gpu/drm/imagination/.*: modules-core
-  - drivers/gpu/drm/lima/.*: modules-core
-  - drivers/gpu/drm/mxsfb/.*: modules-core
-  - drivers/gpu/drm/panfrost/.*: modules-core
-  - drivers/gpu/drm/qxl/.*: modules-core
-  - drivers/gpu/drm/scheduler/.*: modules-core
-  - drivers/gpu/drm/solomon/.*: modules-core
-  - drivers/gpu/drm/tidss/.*: modules-core
-  - drivers/gpu/drm/tiny/.*: modules-core
-  - drivers/gpu/drm/ttm/.*: modules-core
-  - drivers/gpu/drm/udl/.*: modules-core
-  - drivers/gpu/drm/v3d/.*: modules-core
-  - drivers/gpu/drm/vgem/.*: modules-core
-  - drivers/gpu/drm/virtio/.*: modules-core
-  - drivers/gpu/drm/vkms/.*: modules-core
-  - drivers/gpu/drm/vmwgfx/.*: modules-core
-  - drivers/gpu/drm/xlnx/.*: modules-core
-  - drivers/gpu/host1x/.*: modules-core
-
-  - drivers/hid/hid-asus.*: modules
-  - drivers/hid/hid-nintendo.*: modules
-  - drivers/hid/hid-picolcd.*: modules
-  - drivers/hid/hid-playstation.*: modules
-  - drivers/hid/surface-hid.*: modules
-  - drivers/hid/hid-prodikeys.*: modules
-  - drivers/hid/.*: modules-core
-  - drivers/hte/.*: modules-core
-  - drivers/hv/.*: modules-core
-  - drivers/hwmon/asus_wmi_sensors.*: modules
-  - drivers/hwmon/dell-smm-hwmon.*: modules
-  - drivers/hwmon/hp-wmi-sensors.*: modules
-  - drivers/hwmon/intel-m10-bmc-hwmon.*: modules
-  - drivers/hwmon/nct6775.*: modules
-  - drivers/hwmon/ntc_thermistor.*: modules
-  - drivers/hwmon/.*: modules-core
-  - drivers/hwspinlock/.*: modules-core
-  - drivers/hwtracing/.*: modules-core
-
-  - drivers/i2c/busses/i2c-dln2.*: modules-extra
-  - drivers/i2c/busses/i2c-ljca.*: modules
-  - drivers/i2c/.*: modules-core
-  - drivers/i3c/.*: modules-core
-  - drivers/iio/adc/dln2-adc.*: modules-extra
-  - drivers/input/gameport/.*: modules
-  - drivers/input/joystick/.*: modules-extra
-  - drivers/input/tablet/.*: modules
-  - drivers/input/touchscreen/.*: modules
-  - drivers/input/.*: modules-core
-  - drivers/interconnect/.*: modules-core
-  - drivers/iommu/.*: modules-core
-  - drivers/irqchip/.*: modules-core
-
-  - drivers/mailbox/.*: modules-core
-  - drivers/md/.*: modules-core
-  - drivers/memory/dfl-emif.*: modules
-  - drivers/memory/.*: modules-core
-  - drivers/message/fusion/mptctl.*: modules-extra
-  - drivers/message/fusion/mptfc.*: modules-extra
-  - drivers/message/fusion/.*: modules
-  - drivers/message/.*: modules-core
-  - drivers/mfd/dln2.*: modules-extra
-  - drivers/misc/.*: modules-core
-  - drivers/mux/.*: modules-core
-
-  - drivers/net/amt.ko: modules-core
-  - drivers/net/bareudp.ko: modules-core
-  - drivers/net/bonding/.*: modules-core
-  - drivers/net/can/slcan/slcan.*: modules-extra
-  - drivers/net/can/usb/ems_usb.*: modules-extra
-  - drivers/net/can/vcan.*: modules-extra
-  - drivers/net/dummy.ko: modules-core
-  - drivers/net/eql.ko: modules-core
-
-  - drivers/net/ethernet/8390/.*: modules-core
-  - drivers/net/ethernet/adi/.*: modules-core
-  - drivers/net/ethernet/agere/.*: modules-core
-  - drivers/net/ethernet/altera/.*: modules-core
-  - drivers/net/ethernet/amazon/.*: modules-core
-  - drivers/net/ethernet/amd/.*: modules-core
-  - drivers/net/ethernet/apm/.*: modules-core
-  - drivers/net/ethernet/asix/.*: modules-core
-  - drivers/net/ethernet/brocade/.*: modules-core
-  - drivers/net/ethernet/cavium/.*: modules-core
-  - drivers/net/ethernet/dnet.ko: modules-core
-  - drivers/net/ethernet/engleder/.*: modules-core
-  - drivers/net/ethernet/ethoc.ko: modules-core
-  - drivers/net/ethernet/fealnx.ko: modules-core
-  - drivers/net/ethernet/freescale/.*: modules-core
-  - drivers/net/ethernet/fungible/.*: modules-core
-  - drivers/net/ethernet/google/.*: modules-core
-  - drivers/net/ethernet/hisilicon/.*: modules-core
-  - drivers/net/ethernet/huawei/.*: modules-core
-  - drivers/net/ethernet/ibm/.*: modules-core
-  - drivers/net/ethernet/intel/.*: modules-core
-  - drivers/net/ethernet/jme.ko: modules-core
-  - drivers/net/ethernet/litex/.*: modules-core
-  - drivers/net/ethernet/mellanox/.*: modules-core
-  - drivers/net/ethernet/microsoft/.*: modules-core
-  - drivers/net/ethernet/myricom/.*: modules-core
-  - drivers/net/ethernet/natsemi/.*: modules-core
-  - drivers/net/ethernet/netronome/.*: modules-core
-  - drivers/net/ethernet/pensando/.*: modules-core
-  - drivers/net/ethernet/rocker/rocker.*: modules-internal
-  - drivers/net/ethernet/qualcomm/.*: modules-core
-  - drivers/net/ethernet/realtek/.*: modules-core
-  - drivers/net/ethernet/renesas/.*: modules-core
-  - drivers/net/ethernet/socionext/.*: modules-core
-  - drivers/net/ethernet/vertexcom/.*: modules-core
-  - drivers/net/ethernet/wangxun/.*: modules-core
-  - drivers/net/ethernet/xilinx/.*: modules-core
-
-  - drivers/net/fjes/.*: modules-core
-  - drivers/net/geneve.ko: modules-core
-  - drivers/net/gtp.ko: modules-core
-  - drivers/net/hamradio/.*: modules-extra
-  - drivers/net/hyperv/.*: modules-core
-  - drivers/net/ifb.ko: modules-core
-  - drivers/net/ipa/.*: modules-core
-  - drivers/net/ipvlan/.*: modules-core
-  - drivers/net/macsec.ko: modules-core
-  - drivers/net/macvlan.ko: modules-core
-  - drivers/net/macvtap.ko: modules-core
-  - drivers/net/mctp/.*: modules-core
-  - drivers/net/mdio.*: modules-core
-  - drivers/net/mhi_net.ko: modules-core
-  - drivers/net/mii.ko: modules-core
-  - drivers/net/net_failover.ko: modules-core
-  - drivers/net/netdevsim/netdevsim.*: modules-internal
-  - drivers/net/netconsole.ko: modules-core
-  - drivers/net/nlmon.ko: modules-core
-  - drivers/net/pcs/.*: modules-core
-  - drivers/net/phy/.*: modules-core
-  - drivers/net/rionet.ko: modules-core
-  - drivers/net/slip/slip.*: modules-extra
-  - drivers/net/sungem_phy.ko: modules-core
-  - drivers/net/tap.ko: modules-core
-  - drivers/net/team/.*: modules-core
-  - drivers/net/thunderbolt/.*: modules-core
-  - drivers/net/tun.ko: modules-core
-  - drivers/net/veth.ko: modules-core
-  - drivers/net/virtio_net.ko: modules-core
-  - drivers/net/vmxnet3/.*: modules-core
-  - drivers/net/vrf.ko: modules-core
-  - drivers/net/vsockmon.ko: modules-core
-  - drivers/net/vxlan/.*: modules-core
-  - drivers/net/wan/hdlc.*: modules-core
-  - drivers/net/wireguard/.*: modules-core
-  - drivers/net/wireless/virtual/mac80211_hwsim.*: modules-internal
-  - drivers/net/wwan/wwan_hwsim.*: modules-internal
-  - drivers/net/wwan/.*: modules-core
-  - drivers/net/xen.*: modules-core
-
-  - drivers/nvdimm/.*: modules-core
-  - drivers/nvme/host/nvme-rdma.*: modules
-  - drivers/nvme/target/nvmet-rdma.*: modules
-  - drivers/nvme/.*: modules-core
-  - drivers/nvmem/nvmem_u-boot-env.*: modules
-  - drivers/nvmem/.*: modules-core
-
-  - drivers/parport/parport_serial.*: modules
-  - drivers/parport/.*: modules-core
-  - drivers/pci/pcie/aer_inject.*: modules-extra
-  - drivers/pci/.*: modules-core
-  - drivers/perf/.*: modules-core
-  - drivers/phy/.*: modules-core
-  - drivers/pinctrl/.*: modules-core
-  - drivers/platform/x86/intel/intel_vsec.*: modules-core
-  - drivers/pmdomain/.*: modules-core
-  - drivers/powercap/intel_rapl_tpmi.*: modules
-  - drivers/powercap/.*: modules-core
-  - drivers/pps/.*: modules-core
-  - drivers/ptp/ptp_mock.*: modules-internal
-  - drivers/ptp/ptp_dfl_tod.*: modules
-  - drivers/ptp/.*: modules-core
-  - drivers/pwm/.*: modules-core
-
-  - drivers/rapidio/.*: modules-core
-  - drivers/regulator/arizona-micsupp.*: modules
-  - drivers/regulator/.*: modules-core
-  - drivers/remoteproc/.*: modules-core
-  - drivers/reset/.*: modules-core
-  - drivers/rpmsg/.*: modules-core
-  - drivers/rtc/.*: modules-core
-
-  - drivers/s390/net/ism.*: modules
-  - drivers/s390/.*: modules-core
-
-  - drivers/scsi/3w.*: modules-core
-  - drivers/scsi/BusLogic.ko: modules-core
-  - drivers/scsi/a100u2w.ko: modules-core
-  - drivers/scsi/advansys.ko: modules-core
-  - drivers/scsi/am53c974.ko: modules-core
-  - drivers/scsi/arcmsr.*: modules-core
-  - drivers/scsi/atp870u.ko: modules-core
-  - drivers/scsi/ch.ko: modules-core
-  - drivers/scsi/cxlflash/.*: modules-core
-  - drivers/scsi/dc395x.ko: modules-core
-  - drivers/scsi/device_handler/.*: modules-core
-  - drivers/scsi/dmx3191d.ko: modules-core
-  - drivers/scsi/elx/.*: modules-core
-  - drivers/scsi/esp_scsi.ko: modules-core
-  - drivers/scsi/fdomain.*: modules-core
-  - drivers/scsi/hpsa.ko: modules-core
-  - drivers/scsi/hptiop.ko: modules-core
-  - drivers/scsi/hv_storvsc.ko: modules-core
-  - drivers/scsi/ibmvscsi.*: modules-core
-  - drivers/scsi/initio.ko: modules-core
-  - drivers/scsi/ipr.ko: modules-core
-  - drivers/scsi/ips.ko: modules-core
-  - drivers/scsi/iscsi_tcp.ko: modules-core
-  - drivers/scsi/libfc/.*: modules-core
-  - drivers/scsi/libiscsi.*: modules-core
-  - drivers/scsi/mpi3mr/.*: modules-core
-  - drivers/scsi/mvumi.ko: modules-core
-  - drivers/scsi/myrb.ko: modules-core
-  - drivers/scsi/myrs.ko: modules-core
-  - drivers/scsi/raid_class.ko: modules-core
-  - drivers/scsi/scsi_debug.ko: modules-core
-  - drivers/scsi/scsi_transport_.*: modules-core
-  - drivers/scsi/sd_mod.ko: modules-core
-  - drivers/scsi/ses.ko: modules-core
-  - drivers/scsi/sg.ko: modules-core
-  - drivers/scsi/smartpqi/.*: modules-core
-  - drivers/scsi/snic/.*: modules-core
-  - drivers/scsi/sr_mod.ko: modules-core
-  - drivers/scsi/st.ko: modules-core
-  - drivers/scsi/stex.ko: modules-core
-  - drivers/scsi/virtio_scsi.ko: modules-core
-  - drivers/scsi/vmw_pvscsi.ko: modules-core
-  - drivers/scsi/wd719x.ko: modules-core
-  - drivers/scsi/xen-scsifront.ko: modules-core
-
-  - drivers/slimbus/.*: modules-core
-  - drivers/soc/.*: modules-core
-  - drivers/spi/spi-altera-dfl.*: modules
-  - drivers/spi/spi-dln2.*: modules-extra
-  - drivers/spi/spi-ljca.*: modules
-  - drivers/spi/.*: modules-core
-  - drivers/spmi/.*: modules-core
-
-  - drivers/target/iscsi/cxgbit/cxgbit.*: modules
-  - drivers/target/sbp/sbp_target.*: modules
-  - drivers/target/target_core_user.*: modules
-  - drivers/target/.*: modules-core
-  - drivers/tee/.*: modules-core
-  - drivers/thermal/intel/int340x_thermal/int3406_thermal.*: modules
-  - drivers/thermal/.*: modules-core
-  - drivers/thunderbolt/.*: modules-core
-
-  - drivers/ufs/.*: modules-core
-  - drivers/usb/atm/.*: modules
-  - drivers/usb/gadget/function/usb_f_midi2.*: modules
-  - drivers/usb/image/.*: modules
-  - drivers/usb/misc/trancevibrator.*: modules-extra
-  - drivers/usb/misc/.*: modules
-  - drivers/usb/serial/.*: modules
-  - drivers/usb/typec/mux/nb7vpq904m.*: modules
-  - drivers/usb/usbip/.*: modules-internal
-  - drivers/usb/.*: modules-core
-
-  - drivers/vdpa/mlx5/mlx5_vdpa.*: modules
-  - drivers/vdpa/pds/pds_vdpa.*: modules
-  - drivers/vdpa/.*: modules-core
-  - drivers/vfio/pci/mlx5/mlx5-vfio-pci.*: modules
-  - drivers/vfio/pci/pds/pds-vfio-pc.*: modules
-  - drivers/vfio/.*: modules-core
-  - drivers/vhost/.*: modules-core
-  - drivers/video/backlight/apple_bl.*: modules
-  - drivers/video/.*: modules-core
-  - drivers/virt/.*: modules-core
-  - drivers/virtio/.*: modules-core
-
-  - drivers/watchdog/.*: modules-core
-
-  - drivers/xen/.*: modules-core
-
-  - drivers/w1/masters/ds2482.*: modules-extra
-  - drivers/w1/masters/ds2490.*: modules-extra
-  - drivers/w1/slaves/w1_ds2408.*: modules-extra
-  - drivers/w1/slaves/w1_ds2423.*: modules-extra
-  - drivers/w1/slaves/w1_ds2431.*: modules-extra
-  - drivers/w1/slaves/w1_ds2433.*: modules-extra
-  - drivers/w1/slaves/w1_ds2780.*: modules-extra
-  - drivers/w1/slaves/w1_ds2781.*: modules-extra
-  - drivers/w1/slaves/w1_ds28e04.*: modules-extra
-  - drivers/w1/slaves/w1_smem.*: modules-extra
-  - drivers/w1/slaves/w1_therm.*: modules-extra
-
-  - fs/9p/.*: modules-core
-  - fs/afs/.*: modules-partner
-  - fs/affs/affs.*: modules-extra
-  - fs/bcachefs/.*: modules-core
-  - fs/befs/befs.*: modules-extra
-  - fs/binfmt_misc.ko: modules-core
-  - fs/cachefiles/.*: modules-core
-  - fs/ceph/.*: modules-core
-  - fs/coda/coda.*: modules-extra
-  - fs/dlm/.*: modules-core
-  - fs/erofs/.*: modules-core
-  - fs/exfat/.*: modules-core
-  - fs/ext4/.*: modules-core
-  - fs/f2fs/.*: modules-core
-  - fs/fat/.*: modules-core
-  - fs/fuse/cuse.*: modules-extra
-  - fs/fuse/.*: modules-core
-  - fs/gfs2/.*: modules-core
-  - fs/isofs/.*: modules-core
-  - fs/jbd2/.*: modules-core
-  - fs/lockd/.*: modules-core
-  - fs/mbcache.ko: modules-core
-  - fs/netfs/.*: modules-core
-  - fs/nfs.*: modules-core
-  - fs/nilfs2/nilfs2.*: modules-extra
-  - fs/nls/.*: modules-core
-  - fs/ntfs3/.*: modules-core
-  - fs/ocfs2/.*: modules-extra
-  - fs/orangefs/.*: modules-core
-  - fs/overlayfs/.*: modules-core
-  - fs/pstore/.*: modules-core
-  - fs/sysv/.*: modules-extra
-  - fs/ubifs/.*: modules-extra
-  - fs/udf/.*: modules-core
-  - fs/ufs/.*: modules-extra
-  - fs/vboxsf/.*: modules-core
-  - fs/xfs/.*: modules-core
-  - fs/zonefs/.*: modules-core
-
-  - kernel/locking/locktorture.*: modules-internal
-  - kernel/rcu/rcuscale.*: modules-internal
-  - kernel/rcu/rcutorture.*: modules-internal
-  - kernel/rcu/refscale.*: modules-internal
-  - kernel/scftorture.*: modules-internal
-  - kernel/torture.*: modules-internal
-  - kernel/.*: modules-core
-
-  - lib/.*: modules-core
-
-  - mm/zsmalloc.ko: modules-core
-
-  - net/802/.*: modules-core
-  - net/8021q/.*: modules-core
-  - net/9p/9pnet_rdma.ko: modules
-  - net/9p/.*: modules-core
-  - net/appletalk/appletalk.*: modules-extra
-  - net/atm/br2684.*: modules-extra
-  - net/atm/clip.*: modules-extra
-  - net/atm/lec.*: modules-extra
-  - net/atm/pppoatm.*: modules-extra
-  - net/ax25/ax25.*: modules-extra
-  - net/batman-adv/batman-adv.*: modules-extra
-  - net/bridge/br_netfilter.*: modules-extra
-  - net/bridge/netfilter/ebt.*: modules-extra
-  - net/bridge/.*: modules-core
-  - net/ceph/.*: modules-core
-  - net/core/pktgen.*: modules-internal
-  - net/core/.*: modules-core
-  - net/dns_resolver/.*: modules-core
-  - net/hsr/.*: modules-core
-  - net/ife/.*: modules-core
-  - net/ipv4/netfilter/arp.*: modules-extra
-  - net/ipv4/netfilter/ip[_t].*: modules-extra
-  - net/ipv4/tcp_bic.*: modules-extra
-  - net/ipv4/tcp_highspeed.*: modules-extra
-  - net/ipv4/tcp_htcp.*: modules-extra
-  - net/ipv4/tcp_hybla.*: modules-extra
-  - net/ipv4/tcp_illinois.*: modules-extra
-  - net/ipv4/tcp_lp.*: modules-extra
-  - net/ipv4/tcp_scalable.*: modules-extra
-  - net/ipv4/tcp_vegas.*: modules-extra
-  - net/ipv4/tcp_veno.*: modules-extra
-  - net/ipv4/tcp_westwood.*: modules-extra
-  - net/ipv4/tcp_yeah.*: modules-extra
-  - net/ipv4/.*: modules-core
-  - net/ipv6/netfilter/ebt.*: modules-extra
-  - net/ipv6/netfilter/ip6[_t].*: modules-extra
-  - net/ipv6/.*: modules-core
-  - net/iucv/.*: modules-core
-  - net/kcm/.*: modules-core
-  - net/key/.*: modules-core
-  - net/l2tp/.*: modules-extra
-  - net/llc/.*: modules-core
-  - net/netfilter/ipset/.*: modules-extra
-  - net/netfilter/nft_compat.*: modules-extra
-  - net/netfilter/xt_.*: modules-extra
-  - net/netfilter/.*: modules-core
-  - net/netrom/netrom.*: modules-extra
-  - net/nsh/.*: modules-core
-  - net/openvswitch/.*: modules-core
-  - net/psample/.*: modules-core
-  - net/qrtr/.*: modules-core
-  - net/rds/rds.*: modules-extra
-  - net/rose/rose.*: modules-extra
-  - net/rxrpc/.*: modules-partner
-  - net/sched/.*: modules-core
-  - net/sctp/.*: modules-extra
-  - net/sunrpc/xprtrdma/rpcrdma.*: modules
-  - net/sunrpc/.*: modules-core
-  - net/tipc/.*: modules-extra
-  - net/tls/.*: modules-core
-  - net/vmw_vsock/.*: modules-core
-  - net/xdp/.*: modules-core
-  - net/xfrm/.*: modules-core
-
-  - samples/.*: modules-internal
-
-  - virt/.*: modules-core
-
-  - default: modules

dracut-virt.conf

@@ -1,58 +0,0 @@
-# generic + compressed please
-hostonly="no"
-compress="xz"
-
-# VMs can't update microcode anyway
-early_microcode="no"
-
-# modules: basics
-dracutmodules+=" dracut-systemd i18n shutdown "
-
-# modules: storage support
-dracutmodules+=" dm lvm rootfs-block fs-lib "
-
-# modules: tpm and crypto
-dracutmodules+=" crypt crypt-loop tpm2-tss systemd-pcrphase "
-
-# dracut >= 102 separated systemd-cryptsetup into its own module
-CSMODULE=`dracut --list-modules --no-kernel | grep '^systemd-cryptsetup$'`
-dracutmodules+=" $CSMODULE "
-
-# modules: support root on virtiofs
-dracutmodules+=" virtiofs "
-
-# modules: use sysext images (see 'man systemd-sysext')
-dracutmodules+=" systemd-sysext "
-
-# modules: root disk integrity protection
-dracutmodules+=" systemd-veritysetup "
-
-# modules: root creation and encryption
-dracutmodules+=" systemd-repart "
-# FIXME: remove this once RHEL-103385 is merged
-install_items+=" /usr/sbin/mkfs.vfat /usr/sbin/mkfs.ext4 /usr/sbin/mkfs.xfs "
-
-# modules: FIPS
-dracutmodules+=" fips "
-# FIPS mode requires early crypto drivers test
-drivers+=" =crypto "
-
-# drivers: virtual buses, pci
-drivers+=" virtio-pci virtio-mmio "      # qemu-kvm
-drivers+=" hv-vmbus pci-hyperv "         # hyperv
-drivers+=" xen-pcifront "                # xen
-
-# drivers: storage
-drivers+=" ahci nvme sd_mod sr_mod "     # generic
-drivers+=" virtio-blk virtio-scsi "      # qemu-kvm
-drivers+=" hv-storvsc "                  # hyperv
-drivers+=" xen-blkfront "                # xen
-
-# root encryption
-drivers+=" dm_crypt "
-
-# root disk integrity protection
-drivers+=" dm_verity overlay "
-
-# filesystems
-filesystems+=" vfat ext4 xfs overlay "

flavors

@@ -1,2 +0,0 @@
-rhel
-fedora

gating.yaml

@@ -1,14 +0,0 @@
---- !Policy
-product_versions:
-  - rhel-*
-decision_context: osci_compose_gate
-rules:
-  - !PassingTestCaseRule {test_case_name: cki.tier1-aarch64.functional}
-  - !PassingTestCaseRule {test_case_name: cki.tier1-ppc64le.functional}
-  - !PassingTestCaseRule {test_case_name: cki.tier1-s390x.functional}
-  - !PassingTestCaseRule {test_case_name: cki.tier1-x86_64.functional}
-  - !PassingTestCaseRule {test_case_name: s1-aws-ci_x86_64.brew-build.tier1.functional}
-  - !PassingTestCaseRule {test_case_name: s1-aws-ci_aarch64.brew-build.tier1.functional}
-  - !PassingTestCaseRule {test_case_name: s1-azure-ci_x86_64.brew-build.tier1.functional}
-  - !PassingTestCaseRule {test_case_name: s1-azure-ci_aarch64.brew-build.tier1.functional}
-  - !PassingTestCaseRule {test_case_name: s1-gcp-ci.brew-build.tier1.functional}

generate_all_configs.sh

@@ -1,38 +0,0 @@
-#!/bin/sh
-
-# Adjusts the configuration options to build the variants correctly
-
-test -n "$RHTEST" && exit 0
-
-DEBUGBUILDSENABLED=$1
-if [ -z "$DEBUGBUILDSENABLED" ]; then
-	exit 1
-fi
-
-if [ -z "$FLAVOR" ]; then
-	FLAVOR=rhel
-fi
-
-if [ "$FLAVOR" = "fedora" ]; then
-	SECONDARY=rhel
-else
-	SECONDARY=fedora
-fi
-
-# The +1 is to remove the - at the end of the SPECPACKAGE_NAME string
-specpackage_name_len=$((${#SPECPACKAGE_NAME} + 1))
-for i in "${SPECPACKAGE_NAME}"*-"$FLAVOR".config; do
-	# shellcheck disable=SC3057
-	NEW=${SPECPACKAGE_NAME}-"$SPECRPMVERSION"-$(echo "${i:$specpackage_name_len}" | sed s/-"$FLAVOR"//)
-	mv "$i" "$NEW"
-done
-
-rm -f kernel-*-"$SECONDARY".config
-
-if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
-	for i in "${SPECPACKAGE_NAME}"-*debug*.config; do
-		base=$(echo "$i" | sed -r s/-?debug//g)
-		NEW=${SPECPACKAGE_NAME}-$(echo "$base" | cut -d - -f2-)
-		mv "$i" "$NEW"
-	done
-fi

kernel-local

@@ -1,2 +0,0 @@
-# This file is intentionally left empty in the stock kernel. Its a nicety
-# added for those wanting to do custom rebuilds with altered config opts.

kernel.sbat.template

@@ -1,2 +0,0 @@
-sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md
-kernel.@SBAT_SUFFIX,1,Red Hat,kernel-core,@KVER,mailto:secalert@redhat.com

kvm_stat.logrotate

@@ -1,11 +0,0 @@
-/var/log/kvm_stat.csv {
-	size 10M
-	missingok
-	compress
-	maxage 30
-	rotate 5
-	nodateext
-	postrotate
-		/usr/bin/systemctl try-restart kvm_stat.service
-	endscript
-}

merge.py

@@ -1,88 +0,0 @@
-#!/usr/bin/python3
-# SPDX-License-Identifier: GPL-2.0
-# Author: Clark Williams <williams@redhat.com>
-# Copyright (C) 2022 Red Hat, Inc.
-#
-# merge.py - a direct replacement for merge.pl in the redhat/configs directory
-#
-# invocation:   python merge.py overrides baseconfig [arch]
-#
-# This script merges two kernel configuration files, an override file and a
-# base config file and writes the results to stdout.
-#
-# The script reads the overrides into a dictionary, then reads the baseconfig
-# file, looking for overrides and replacing any found, then printing the result
-# to stdout. Finally any remaining (new) configs in the override are appended to the
-# end of the output
-
-import sys
-import re
-import os.path
-
-def usage(msg):
-    '''print a usage message and exit'''
-    sys.stderr.write(msg + "\n")
-    sys.stderr.write("usage: merge.py overrides baseconfig [arch]\n")
-    sys.exit(1)
-
-isset = re.compile(r'^(CONFIG_\w+)=')
-notset = re.compile(r'^#\s+(CONFIG_\w+)\s+is not set')
-
-# search an input line for a config (set or notset) pattern
-# if we get a match return the config that is being changed
-def find_config(line):
-    '''find a configuration line in the input and return the config name'''
-    m = isset.match(line)
-    if (m is not None):
-        return m.group(1)
-
-    m = notset.match(line)
-    if (m is not None):
-        return m.group(1)
-
-    return None
-
-#########################################################
-
-if len(sys.argv) < 3:
-    usage("must have two input files")
-
-override_file = sys.argv[1]
-baseconfig_file = sys.argv[2]
-
-if not os.path.exists(override_file):
-    usage(f"overrides config file {override_file:s} does not exist!")
-
-if not os.path.exists(baseconfig_file):
-    usage(f"base configs file {baseconfig_file:s} does not exist")
-
-if len(sys.argv) == 4:
-    print(f"# {sys.argv[3]:s}")
-
-# read each line of the override file and store any configuration values
-# in the overrides dictionary, keyed by the configuration name.
-overrides = {}
-with open(override_file, "rt", encoding="utf-8") as f:
-    for line in [l.strip() for l in f.readlines()]:
-        c = find_config(line)
-        if c and c not in overrides:
-            overrides[c] = line
-
-# now read and print the base config, checking each line
-# that defines a config value and printing the override if
-# it exists
-with open(baseconfig_file, "rt", encoding="utf-8") as f:
-    for line in [ l.strip() for l in f.readlines() ]:
-        c = find_config(line)
-        if c and c in overrides:
-            print(overrides[c])
-            del overrides[c]
-        else:
-            print(line)
-
-# print out the remaining configs (new values)
-# from the overrides file
-for v in overrides.values():
-    print (v)
-
-sys.exit(0)

mod-denylist.sh

@@ -1,67 +0,0 @@
-#! /bin/bash
-# shellcheck disable=SC2164
-
-rpm_buildroot="$1"
-module_dir="$2"
-module_list="$3"
-
-blacklist_conf_files="$(mktemp)"
-
-blacklist()
-{
-	mkdir -p "$rpm_buildroot/etc/modprobe.d/"
-	cat > "$rpm_buildroot/etc/modprobe.d/$1-blacklist.conf" <<-__EOF__
-	# This kernel module can be automatically loaded by non-root users. To
-	# enhance system security, the module is blacklisted by default to ensure
-	# system administrators make the module available for use as needed.
-	# See https://access.redhat.com/articles/3760101 for more details.
-	#
-	# Remove the blacklist by adding a comment # at the start of the line.
-	blacklist $1
-__EOF__
-	echo "%config(noreplace) /etc/modprobe.d/$1-blacklist.conf" >> "$blacklist_conf_files"
-}
-
-check_blacklist()
-{
-	mod="$rpm_buildroot/$1"
-	[ ! "$mod" ] && return 0
-	if modinfo "$mod" | grep -q '^alias:\s\+net-'; then
-		mod="${1##*/}"
-		mod="${mod%.ko*}"
-		echo "$mod has an alias that allows auto-loading. Blacklisting."
-		blacklist "$mod"
-	fi
-}
-
-foreachp()
-{
-	P=$(nproc)
-	bgcount=0
-	while read -r mod; do
-		$1 "$mod" &
-
-		bgcount=$((bgcount + 1))
-		if [ $bgcount -eq "$P" ]; then
-			wait -n
-			bgcount=$((bgcount - 1))
-		fi
-	done
-
-	wait
-}
-
-# Many BIOS-es export a PNP-id which causes the floppy driver to autoload
-# even though most modern systems don't have a 3.5" floppy driver anymore
-# this replaces the old die_floppy_die.patch which removed the PNP-id from
-# the module
-
-floppylist=("$rpm_buildroot"/"$module_dir"/kernel/drivers/block/floppy.ko*)
-if [[ -n ${floppylist[0]} && -f ${floppylist[0]} ]]; then
-     blacklist "floppy"
-fi
-
-foreachp check_blacklist < "$module_list"
-
-cat "$blacklist_conf_files" >> "$module_list"
-rm -f "$blacklist_conf_files"

mod-sign.sh

@@ -1,37 +0,0 @@
-#! /bin/bash
-
-# The modules_sign target checks for corresponding .o files for every .ko that
-# is signed. This doesn't work for package builds which re-use the same build
-# directory for every variant, and the .config may change between variants.
-# So instead of using this script to just sign lib/modules/$KernelVer/extra,
-# sign all .ko in the buildroot.
-
-# This essentially duplicates the 'modules_sign' Kbuild target and runs the
-# same commands for those modules.
-
-MODSECKEY=$1
-MODPUBKEY=$2
-moddir=$3
-
-modules=$(find "$moddir" -type f -name '*.ko')
-
-NPROC=$(nproc)
-[ -z "$NPROC" ] && NPROC=1
-
-# NB: this loop runs 2000+ iterations. Try to be fast.
-echo "$modules" | xargs -r -n16 -P "$NPROC" sh -c "
-for mod; do
-    ./scripts/sign-file sha256 $MODSECKEY $MODPUBKEY \$mod
-    rm -f \$mod.sig \$mod.dig
-done
-" DUMMYARG0   # xargs appends ARG1 ARG2..., which go into $mod in for loop.
-
-RANDOMMOD=$(echo "$modules" | sort -R | head -n 1)
-if [ "~Module signature appended~" != "$(tail -c 28 "$RANDOMMOD")" ]; then
-    echo "*****************************"
-    echo "*** Modules are unsigned! ***"
-    echo "*****************************"
-    exit 1
-fi
-
-exit 0

partial-clang-debug-snip.config

@@ -1,4 +0,0 @@
-# clang
-# CONFIG_DRM_WERROR is not set
-CONFIG_KASAN_STACK=y
-# CONFIG_KMSAN is not set

partial-clang-snip.config

@@ -1,4 +0,0 @@
-# clang
-# CONFIG_DRM_WERROR is not set
-# CONFIG_KASAN_STACK is not set
-# CONFIG_KMSAN is not set

partial-clang_lto-aarch64-debug-snip.config

@@ -1,6 +0,0 @@
-# clang_lto
-# CONFIG_AUTOFDO_CLANG is not set
-# CONFIG_DRM_WERROR is not set
-CONFIG_KASAN_STACK=y
-# CONFIG_KMSAN is not set
-# CONFIG_PROPELLER_CLANG is not set

partial-clang_lto-aarch64-snip.config

@@ -1,6 +0,0 @@
-# clang_lto
-# CONFIG_DRM_WERROR is not set
-# CONFIG_KASAN_STACK is not set
-# CONFIG_KMSAN is not set
-CONFIG_LTO_CLANG_THIN=y
-# CONFIG_LTO_NONE is not set

partial-clang_lto-x86_64-debug-snip.config

@@ -1,6 +0,0 @@
-# clang_lto
-# CONFIG_AUTOFDO_CLANG is not set
-# CONFIG_DRM_WERROR is not set
-CONFIG_KASAN_STACK=y
-# CONFIG_KMSAN is not set
-# CONFIG_PROPELLER_CLANG is not set

partial-clang_lto-x86_64-snip.config

@@ -1,8 +0,0 @@
-# clang_lto
-# CONFIG_AUTOFDO_CLANG is not set
-# CONFIG_DRM_WERROR is not set
-# CONFIG_KASAN_STACK is not set
-# CONFIG_KMSAN is not set
-CONFIG_LTO_CLANG_THIN=y
-# CONFIG_LTO_NONE is not set
-# CONFIG_PROPELLER_CLANG is not set

partial-kgcov-debug-snip.config

@@ -1,6 +0,0 @@
-# kgcov
-CONFIG_GCOV_KERNEL=y
-CONFIG_GCOV_PROFILE_ALL=y
-# CONFIG_GCOV_PROFILE_FTRACE is not set
-CONFIG_GCOV_PROFILE_RDS=y
-CONFIG_GCOV_PROFILE_URING=y

partial-kgcov-snip.config

@@ -1,6 +0,0 @@
-# kgcov
-CONFIG_GCOV_KERNEL=y
-CONFIG_GCOV_PROFILE_ALL=y
-# CONFIG_GCOV_PROFILE_FTRACE is not set
-CONFIG_GCOV_PROFILE_RDS=y
-CONFIG_GCOV_PROFILE_URING=y

process_configs.sh

@@ -1,590 +0,0 @@
-#!/bin/bash
-#
-# This script takes the merged config files and processes them through olddefconfig
-# and listnewconfig to ensure kernel configurations are valid and complete.
-#
-# Globally disable suggestion of appending '|| exit' or '|| return' to cd/pushd/popd commands
-# shellcheck disable=SC2164
-
-# Exit if this is a test environment
-test -n "$RHTEST" && exit 0
-
-# Display usage information and available command line options
-usage()
-{
-	# alphabetical order please
-	echo "process_configs.sh [ options ] package_name kernel_version"
-	echo "     -a: report all errors, equivalent to [-c -n -w -i]"
-	echo "     -c: error on mismatched config options"
-	echo "     -i: ignore any errors, but print them"
-	echo "     -m: specify make options (e.g., -m CC=clang, -m LLVM=1)"
-	echo "     -M: commit mismatched configs to pending directory"
-	echo "     -n: error on unset config options"
-	echo "     -t: test run, do not overwrite original config"
-	echo "     -w: error on misconfigured config options"
-	echo "     -z: commit new configs to pending directory"
-	echo ""
-	echo "     A special CONFIG file tag, process_configs_known_broken can be added as a"
-	echo "     comment to any CONFIG file.  This tag indicates that there is no way to "
-	echo "     fix a CONFIG's entry.  This tag should only be used in extreme cases"
-	echo "     and is not to be used as a workaround to solve CONFIG problems."
-	exit 1
-}
-
-die()
-{
-	echo "$1"
-	exit 1
-}
-
-# Determine the correct cross-compiler prefix based on compiler type
-# For clang builds, return the architecture directly
-# For GCC builds, use the dummy-tools directory
-get_cross_compile()
-{
-	arch=$1
-	if [[ "$CC_IS_CLANG" -eq 1 ]]; then
-		echo "$arch"
-	else
-		echo "scripts/dummy-tools/"
-	fi
-}
-
-# Find the top-level kernel source directory
-# (identified by MAINTAINERS file and drivers directory)
-switch_to_toplevel()
-{
-	path="$(pwd)"
-	while test -n "$path"
-	do
-		test -e "$path"/MAINTAINERS && \
-			test -d "$path"/drivers && \
-			break
-
-		path=$(dirname "$path")
-	done
-
-	test -n "$path"  || die "Can't find toplevel"
-	echo "$path"
-}
-
-# Determine the correct config path based on architecture and variant
-# This function maps arch/variant combinations to the proper pending directory
-determine_config_path()
-{
-	local arch="$1"
-	local variant="$2"
-	local config_path=""
-
-	# Identify the variant - they have their own top-level directories
-	if [[ "$variant" == *"rt"* ]]; then
-		# RT variant - goes under rt/
-		if [[ "$variant" == *"debug"* ]]; then
-			config_path="rt/debug"
-		else
-			config_path="rt/generic"
-		fi
-	elif [[ "$variant" == *"automotive"* ]]; then
-		# Automotive variant - goes under automotive/
-		if [[ "$variant" == *"debug"* ]]; then
-			config_path="automotive/debug"
-		else
-			config_path="automotive/generic"
-		fi
-	else
-		# Stock kernel - goes under top-level debug or generic
-		if [[ "$variant" == *"debug"* ]]; then
-			config_path="debug"
-		else
-			config_path="generic"
-		fi
-	fi
-
-	# Add architecture-specific subdirectories
-	case "$arch" in
-		arm64)
-			config_path="$config_path/arm/aarch64"
-			;;
-		powerpc)
-			config_path="$config_path/powerpc"
-			;;
-		riscv)
-			config_path="$config_path/riscv/riscv64"
-			;;
-		s390)
-			if [[ "$variant" == *"zfcpdump"* ]]; then
-				config_path="$config_path/s390x/zfcpdump"
-			else
-				config_path="$config_path/s390x"
-			fi
-			;;
-		x86_64)
-			config_path="$config_path/x86"
-			;;
-		*)
-			# For unknown architectures, don't add arch subdirectory
-			;;
-	esac
-
-	echo "$config_path"
-}
-
-# Parse mismatched configs found during processing and create
-# individual CONFIG files in the pending directory for each
-parse_mismatched_configs()
-{
-	local tmpdir
-	local count=$1    # Counter for unique filenames
-	local arch=$2
-	local variant=$3
-
-	tmpdir=$(mktemp -d)
-
-	# Parse the mismatches file and create individual CONFIG files
-	tail -n +2 .mismatches"${count}" | while read -r LINE
-	do
-		if echo "$LINE" | grep -q "Found # .* is not set, after generation"; then
-			# Handle case where we found "# CONFIG_FOO is not set" after generation
-			config_name="${LINE#*Found # }"
-			config_name="${config_name% is not set, after generation*}"
-			if [ -n "$config_name" ]; then
-				echo "# Mismatch found in $arch $variant config" > "$tmpdir/$config_name"
-				echo "# $config_name is not set" >> "$tmpdir/$config_name"
-			fi
-		elif echo "$LINE" | grep -q "Found .* after generation"; then
-			# Handle case where we found "CONFIG_FOO=value" after generation
-			config_name="${LINE#*Found }"
-			config_name="${config_name% after generation*}"
-			config_name="${config_name%=*}"
-			config_value="${LINE#*Found }"
-			config_value="${config_value#*=}"
-			config_value="${config_value% after generation*}"
-			if [ -n "$config_name" ] && [ -n "$config_value" ]; then
-				echo "# Mismatch found in $arch $variant config" > "$tmpdir/$config_name"
-				echo "$config_name=$config_value" >> "$tmpdir/$config_name"
-			fi
-		fi
-	done
-
-	# Copy the CONFIG files to the pending directory
-	config_path=$(determine_config_path "$arch" "$variant")
-	mkdir -p "$SCRIPT_DIR/pending-$FLAVOR/$config_path/"
-	for f in "$tmpdir"/*; do
-		[[ -e "$f" ]] || break
-		cp "$f" "$SCRIPT_DIR/pending-$FLAVOR/$config_path/"
-	done
-
-	rm -rf "$tmpdir"
-}
-
-# Check for configuration mismatches between the original and generated configs
-checkoptions()
-{
-	cfg=$1      # Original config file
-	cfgtmp=$2   # Generated config file
-	count=$3    # Counter for unique filenames
-	variant=$4  # Config variant (e.g., debug, rt)
-
-	# This awk script compares configuration files for mismatches
-	/usr/bin/awk '
-
-		/is not set/ {
-			split ($0, a, "#");
-			split(a[2], b);
-			if (NR==FNR) {
-				configs[b[1]]="is not set";
-			} else {
-				if (configs[b[1]] != "" && configs[b[1]] != "is not set")
-					 print "Found # "b[1] " is not set, after generation, had " b[1] " " configs[b[1]] " in Source tree";
-			}
-		}
-
-		/=/     {
-			split ($0, a, "=");
-			if (NR==FNR) {
-				configs[a[1]]=a[2];
-			} else {
-				if (configs[a[1]] != "" && configs[a[1]] != a[2])
-					 print "Found "a[1]"="a[2]" after generation, had " a[1]"="configs[a[1]]" in Source tree";
-			}
-		}
-	' "$cfg" "$cfgtmp" > .mismatches"${count}"
-
-	checkoptions_error=false
-	if test -s .mismatches"${count}"
-	then
-		while read -r LINE
-		do
-			if find "${REDHAT}"/configs -name "$(echo "$LINE" | awk -F "=" ' { print $1 } ' | awk ' { print $2 }')" -print0 | xargs -0 grep ^ | grep -q "process_configs_known_broken"; then
-				# This is a known broken config.
-				# See script help warning.
-				checkoptions_error=false
-			else
-				checkoptions_error=true
-				break
-			fi
-		done < .mismatches"${count}"
-
-		! $checkoptions_error && return
-
-		sed -i "1s/^/Error: Mismatches found in configuration files for ${arch} ${variant}\n/" .mismatches"${count}"
-
-		# Add mismatched configs to the pending directory
-		if test -n "$COMMITMISMATCHES"; then
-			parse_mismatched_configs "$count" "$arch" "$variant"
-		fi
-	else
-		rm -f .mismatches"${count}"
-	fi
-}
-
-# Parse the output of 'make listnewconfig' and 'make helpnewconfig'
-# to create properly formatted configuration files for new configs
-parsenewconfigs()
-{
-	tmpdir=$(mktemp -d)
-
-	# This awk script reads the output of make listnewconfig
-	# and puts it into CONFIG_FOO files. Using the output of
-	# listnewconfig is much easier to ensure we get the default
-	# output.
-        /usr/bin/awk -v BASE="$tmpdir" '
-                /is not set/ {
-                        split ($0, a, "#");
-                        split(a[2], b);
-                        OUT_FILE=BASE"/"b[1];
-                        print $0 >> OUT_FILE;
-                }
-
-                /=/     {
-                        split ($0, a, "=");
-                        OUT_FILE=BASE"/"a[1];
-                        if (a[2] == "n")
-                                print "# " a[1] " is not set" >> OUT_FILE;
-                        else
-                                print $0 >> OUT_FILE;
-                }
-
-        ' .newoptions
-
-	# This awk script parses the output of helpnewconfig.
-	# Each option is separated between ----- markers
-	# The goal is to put all the help text as a comment in
-	# each CONFIG_FOO file. Because of how awk works
-	# there's a lot of moving files around and catting to
-	# get what we need.
-        /usr/bin/awk -v BASE="$tmpdir" '
-                BEGIN { inpatch=0;
-			outfile="none";
-                        symbol="none";
-                        commit=""; }
-                /^Symbol: .*$/ {
-                        split($0, a, " ");
-                        symbol="CONFIG_"a[2];
-                        outfile=BASE "/fake_"symbol
-                        print "# ~~~" >> outfile;
-                }
-                /-----/ {
-			if (inpatch == 0) {
-				inpatch = 1;
-			}
-                        else {
-                                print "# ~~~" >> outfile;
-                                if (symbol != "none") {
-                                    print "# Commit: "commit >> outfile
-                                    system("cat " outfile " " BASE "/" symbol " > " BASE "/tmpf");
-                                    system("mv " BASE "/tmpf " BASE "/" symbol);
-                                    symbol="none"
-                                    commit=""
-				}
-                                outfile="none"
-				inpatch = 0;
-                        }
-                }
-                !/-----/ {
-                        if (inpatch == 1 && outfile != "none") {
-                                print "# "$0 >> outfile;
-                        }
-                }
-                /^Defined at .*$/ {
-                        split($0, x, " ");
-                        filenum=x[3];
-                        split(filenum, x, ":");
-                        file=x[1]
-                        line=x[2]
-                        cmd="git blame -L " line "," line " " file " | cut -d \" \" -f1 | xargs git log --pretty=format:\"%C(auto)%h %C(cyan)('%s')\" -1"
-                        cmd | getline commit
-                }
-
-
-        ' .helpnewconfig
-
-	pushd "$tmpdir" &> /dev/null
-	rm fake_*
-	popd &> /dev/null
-	for f in "$tmpdir"/*; do
-		[[ -e "$f" ]] || break
-		cp "$f" "$SCRIPT_DIR/pending-$FLAVOR/generic/"
-	done
-
-	rm -rf "$tmpdir"
-}
-
-# Commit any mismatched configs that were saved to the pending directory
-commit_mismatched_configs()
-{
-	# assume we are in $source_tree/configs, need to get to top level
-	pushd "$(switch_to_toplevel)" &>/dev/null
-
-	# Check if there are any modified or untracked mismatched configs to commit
-	if git status --porcelain "$SCRIPT_DIR/pending-$FLAVOR/" | grep -q .; then
-		echo "Committing mismatched configuration files..."
-		git add "$SCRIPT_DIR/pending-$FLAVOR"
-		git commit -m "[redhat] AUTOMATIC: Mismatched $FLAVOR configs"
-		echo "Mismatched configs committed to pending-$FLAVOR directory"
-	else
-		echo "No mismatched configs found to commit"
-	fi
-
-	popd &>/dev/null
-}
-
-# Processes all config files, finds new/unset configs, and commits them
-function commit_new_configs()
-{
-	# assume we are in $source_tree/configs, need to get to top level
-	pushd "$(switch_to_toplevel)" &>/dev/null
-
-	for cfg in "$SCRIPT_DIR/${SPECPACKAGE_NAME}${KVERREL}"*.config
-	do
-		arch=$(head -1 "$cfg" | cut -b 3-)
-		cfgtmp="${cfg}.tmp"
-		cfgorig="${cfg}.orig"
-		cat "$cfg" > "$cfgorig"
-
-		if [ "$arch" = "EMPTY" ]
-		then
-			# This arch is intentionally left blank
-			continue
-		fi
-		echo -n "Checking for new configs in $cfg ... "
-
-		# shellcheck disable=SC2086
-		make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE="$(get_cross_compile "$arch")" KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig
-		grep -E 'CONFIG_' .listnewconfig > .newoptions
-		if test -s .newoptions
-		then
-		# shellcheck disable=SC2086
-			make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE="$(get_cross_compile "$arch")" KCONFIG_CONFIG="$cfgorig" helpnewconfig >& .helpnewconfig
-			parsenewconfigs
-		fi
-		rm .newoptions
-		echo "done"
-	done
-
-	# Commit the new configuration files to git
-	git add "$SCRIPT_DIR/pending-$FLAVOR"
-	# DO NOT CHANGE THIS MESSAGE! gen_config_patches.sh looks for this commit message.
-	git commit -m "[redhat] AUTOMATIC: New configs"
-}
-
-# Process a single configuration file
-function process_config()
-{
-	local cfg
-	local arch
-	local cfgtmp
-	local cfgorig
-	local count
-	local variant
-
-	cfg=$1
-	count=$2
-
-	arch=$(head -1 "$cfg" | cut -b 3-)
-
-	if [ "$arch" = "EMPTY" ]
-	then
-		# This arch is intentionally left blank
-		return
-	fi
-
-	variant=$(basename "$cfg" | cut -d"-" -f3- | cut -d"." -f1)
-
-	cfgtmp="${cfg}.tmp"
-	cfgorig="${cfg}.orig"
-	cat "$cfg" > "$cfgorig"
-
-	echo "Processing $cfg ... "
-
-	# shellcheck disable=SC2086
-	make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE="$(get_cross_compile "$arch")" KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig"${count}"
-	grep -E 'CONFIG_' .listnewconfig"${count}" > .newoptions"${count}"
-	if test -n "$NEWOPTIONS" && test -s .newoptions"${count}"
-	then
-		echo "Found unset config items in ${arch} ${variant}, please set them to an appropriate value" >> .errors"${count}"
-		cat .newoptions"${count}" >> .errors"${count}"
-		rm .newoptions"${count}"
-		RETURNCODE=1
-	fi
-	rm -f .newoptions"${count}"
-
-	grep -E 'config.*warning' .listnewconfig"${count}" > .warnings"${count}"
-	if test -n "$CHECKWARNINGS" && test -s .warnings"${count}"
-	then
-		echo "Found misconfigured config items in ${arch} ${variant}, please set them to an appropriate value" >> .errors"${count}"
-		cat .warnings"${count}" >> .errors"${count}"
-	fi
-	rm .warnings"${count}"
-
-	rm .listnewconfig"${count}"
-
-	# shellcheck disable=SC2086
-	make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE="$(get_cross_compile "$arch")" KCONFIG_CONFIG="$cfgorig" olddefconfig > /dev/null || exit 1
-	echo "# $arch" > "$cfgtmp"
-	cat "$cfgorig" >> "$cfgtmp"
-	if test -n "$CHECKOPTIONS"
-	then
-		checkoptions "$cfg" "$cfgtmp" "$count" "$variant"
-	fi
-	# if test run, don't overwrite original
-	if test -n "$TESTRUN"
-	then
-		rm -f "$cfgtmp"
-	else
-		mv "$cfgtmp" "$cfg"
-	fi
-	rm -f "$cfgorig"
-	echo "Processing $cfg complete"
-}
-
-# Process all configuration files
-# Handles parallel processing and error reporting
-function process_configs()
-{
-	# assume we are in $source_tree/configs, need to get to top level
-	pushd "$(switch_to_toplevel)" &>/dev/null
-
-	count=0
-	for cfg in "$SCRIPT_DIR/${SPECPACKAGE_NAME}${KVERREL}"*.config
-	do
-		if [ "$count" -eq 0 ]; then
-			# do the first one by itself so that tools are built
-			process_config "$cfg" "$count"
-		fi
-		process_config "$cfg" "$count" &
-		# shellcheck disable=SC2004
-		waitpids[${count}]=$!
-		((count++))
-		while [ "$(jobs | grep -c Running)" -ge "$RHJOBS" ]; do :; done
-	done
-	# shellcheck disable=SC2048
-	for pid in ${waitpids[*]}; do
-		wait "${pid}"
-	done
-
-	rm "$SCRIPT_DIR"/*.config*.old
-
-	if ls .errors* 1> /dev/null 2>&1; then
-		RETURNCODE=1
-		cat .errors*
-		rm .errors* -f
-	fi
-
-	# Commit any mismatched configs found during processing
-	if [ $RETURNCODE -eq 0 ] && test -n "$COMMITMISMATCHES"; then
-		rm .mismatches* -f
-		commit_mismatched_configs
-	# Otherwise, display any mismatched configs
-	elif ls .mismatches* 1> /dev/null 2>&1; then
-		RETURNCODE=1
-		cat .mismatches*
-		rm .mismatches* -f
-	fi
-
-	popd > /dev/null
-
-	[ $RETURNCODE -eq 0 ] && echo "Processed config files are in $SCRIPT_DIR"
-}
-
-CHECKOPTIONS=""
-IGNOREERRORS=""
-NEWOPTIONS=""
-TESTRUN=""
-CHECKWARNINGS=""
-MAKEOPTS=""
-CC_IS_CLANG=0
-COMMITMISMATCHES=""
-
-RETURNCODE=0
-
-while [[ $# -gt 0 ]]
-do
-	key="$1"
-	case $key in
-		-a)
-			# Enable all error checking options
-			CHECKOPTIONS="x"
-			IGNOREERRORS="x"
-			NEWOPTIONS="x"
-			CHECKWARNINGS="x"
-			;;
-		-c)
-			CHECKOPTIONS="x"
-			;;
-		-h)
-			usage
-			;;
-		-i)
-			IGNOREERRORS="x"
-			;;
-		-n)
-			NEWOPTIONS="x"
-			;;
-		-t)
-			TESTRUN="x"
-			;;
-		-w)
-			CHECKWARNINGS="x"
-			;;
-		-z)
-			COMMITNEWCONFIGS="x"
-			;;
-		-m)
-			shift
-			# Handle clang compiler options
-			if [ "$1" = "CC=clang" ] || [ "$1" = "LLVM=1" ]; then
-				CC_IS_CLANG=1
-			fi
-			MAKEOPTS="$MAKEOPTS $1"
-			;;
-		-M)
-			COMMITMISMATCHES="x"
-			CHECKOPTIONS="x"
-			;;
-		*)
-			break;;
-	esac
-	shift
-done
-
-KVERREL="$(test -n "$1" && echo "-$1" || echo "")"
-FLAVOR="$(test -n "$2" && echo "$2" || echo "rhel")"
-# shellcheck disable=SC2015
-SCRIPT=$(readlink -f "$0")
-SCRIPT_DIR=$(dirname "$SCRIPT")
-
-# to handle this script being a symlink
-cd "$SCRIPT_DIR"
-
-if test -n "$COMMITNEWCONFIGS"; then
-	commit_new_configs
-else
-	process_configs
-fi
-
-if test -n "$IGNOREERRORS"; then
-	exit 0
-else
-	exit $RETURNCODE
-fi

rpminspect.yaml

@@ -1,48 +0,0 @@
-# additional rpminspect configuration for this branch
-
----
-inspections:
-    upstream: off
-
-badfuncs:
-    ignore:
-        - /usr/libexec/ksamples/*
-        - /usr/libexec/kselftests/*
-
-emptyrpm:
-    expected_empty:
-        - kernel
-        - kernel-debug
-        - kernel-debug-devel-matched
-        - kernel-devel-matched
-        - kernel-modules-extra-matched
-        - kernel-zfcpdump
-        - kernel-zfcpdump-devel-matched
-        - kernel-zfcpdump-modules
-        - kernel-zfcpdump-modules-partner
-        - kernel-rt
-        - kernel-rt-debug
-        - kernel-rt-debug-devel-matched
-        - kernel-rt-devel-matched
-        - kernel-rt-modules-extra-matched
-        - kernel-64k
-        - kernel-64k-debug
-        - kernel-64k-debug-devel-matched
-        - kernel-64k-devel-matched
-        - kernel-64k-modules-extra-matched
-        - kernel-rt-64k
-        - kernel-rt-64k-debug
-        - kernel-rt-64k-debug-devel-matched
-        - kernel-rt-64k-devel-matched
-        - kernel-rt-64k-modules-extra-matched
-
-patches:
-    ignore_list:
-        - linux-kernel-test.patch
-        - patch-6.19-redhat.patch
-
-runpath:
-    ignore:
-        - /usr/libexec/kselftests/bpf/urandom_read
-        - /usr/libexec/kselftests/bpf/no_alu32/urandom_read
-        - /usr/libexec/kselftests/bpf/cpuv4/urandom_read

sources

@@ -1,3 +0,0 @@
-SHA512 (linux-6.19-rc5.tar.xz) = d61ec1e68ee22b58a0e335e8a349e8c8a3d59219264d6f769d36c50f9a013e4bdf8b39481aa6dee575df62e60841ba687fccb7a82f99b9b005a09008927cb57e
-SHA512 (kernel-abi-stablelists-6.19.0.tar.xz) = 467b85c3bb413e713a2e1500060fe4f4ba6934cc5a28294a5952e4452baecf997e246317b09a34f7bece1daf26a4d4f40a95557ac843ec30d218c854f576516b
-SHA512 (kernel-kabi-dw-6.19.0.tar.xz) = 7a698cf2b133314dcbe1452a16859aa0af35d486af939b6c72b6d3e88692718900c61b79e31052342075fb74ee61581f19a5f8f1bac3e1813737f6336b84efe4

uki-addons.sbat.template

@@ -1,2 +0,0 @@
-sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md
-kernel-uki-virt-addons.@SBAT_SUFFIX,1,Red Hat,kernel-uki-virt-addons,@KVER,mailto:secalert@redhat.com

uki.sbat.template

@@ -1,2 +0,0 @@
-sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md
-kernel-uki-virt.@SBAT_SUFFIX,1,Red Hat,kernel-uki-virt,@KVER,mailto:secalert@redhat.com

uki_addons.json

@@ -1,48 +0,0 @@
-{
-    "common": {
-        "crashkernel-1536M.addon": [
-            "crashkernel=1536M\n"
-        ],
-        "crashkernel-192M.addon": [
-            "crashkernel=192M\n"
-        ],
-        "crashkernel-1G.addon": [
-            "crashkernel=1G\n"
-        ],
-        "crashkernel-256M.addon": [
-            "crashkernel=256M\n"
-        ],
-        "crashkernel-2G.addon": [
-            "crashkernel=2G\n"
-        ],
-        "crashkernel-512M.addon": [
-            "crashkernel=512M\n"
-        ],
-        "crashkernel-default.addon": [
-            "crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M\n"
-        ],
-        "debug.addon": [
-            "debug"
-        ],
-        "systemd-volatile-overlay.addon": [
-            "systemd.volatile=overlay"
-        ]
-    },
-    "virt": {
-        "common": {
-            "fips-disable.addon": [
-                "fips=0\n"
-            ],
-            "fips-enable.addon": [
-                "fips=1\n"
-            ]
-        },
-        "rhel": {
-            "aarch64": {
-                "crashkernel-default.addon": [
-                    "crashkernel=1G-4G:256M,4G-64G:320M,64G-:576M\n"
-                ]
-            }
-        }
-    }
-}

uki_create_addons.py

@@ -1,136 +0,0 @@
-#!/usr/bin/env python3
-#
-# This script inspects a given json proving a list of addons, and
-# creates an addon for each key/value pair matching the given uki, distro and
-# arch provided in input.
-#
-# Usage: python uki_create_addons.py input_json out_dir uki distro arch [sbat]
-#
-# This tool requires the systemd-ukify and systemd-boot packages.
-#
-# Addon file
-#-----------
-# Each addon terminates with .addon
-# Each addon contains only two types of lines:
-# Lines beginning with '#' are description and thus ignored
-# All other lines are command line to be added.
-# The name of the end resulting addon is taken from the json hierarchy.
-# For example, and addon in json['virt']['rhel']['x86_64']['hello.addon'] will
-# result in an UKI addon file generated in out_dir called
-# hello-virt.rhel.x86_64.addon.efi
-#
-# The common key, present in any sub-dict in the provided json (except the leaf dict)
-# is used as place for default addons when the same addon is not defined deep
-# in the hierarchy. For example, if we define test.addon (text: 'test1\n') in
-# json['common']['test.addon'] = ['test1\n'] and another test.addon (text: test2) in
-# json['virt']['common']['test.addon'] = ['test2'], any other uki except virt
-# will have a test.addon.efi with text "test1", and virt will have a
-# test.addon.efi with "test2"
-
-import os
-import sys
-import json
-import collections
-import subprocess
-
-
-UKIFY_PATH = '/usr/lib/systemd/ukify'
-
-def usage(err):
-    print(f'Usage: {os.path.basename(__file__)} input_json output_dir uki distro arch [sbat]')
-    print(f'Error:{err}')
-    sys.exit(1)
-
-def check_clean_arguments(input_json, out_dir):
-    # Remove end '/'
-    if out_dir[-1:] == '/':
-        out_dir = out_dir[:-1]
-    if not os.path.isfile(input_json):
-        usage(f'input_json {input_json} is not a file, or does not exist!')
-    if not os.path.isdir(out_dir):
-        usage(f'out_dir_dir {out_dir} is not a dir, or does not exist!')
-    return out_dir
-
-UKICmdlineAddon = collections.namedtuple('UKICmdlineAddon', ['name', 'cmdline'])
-uki_addons_list = []
-uki_addons = {}
-
-def parse_lines(lines):
-    cmdline = ''
-    for l in lines:
-        l = l.lstrip()
-        if not l:
-            continue
-        if l[0] == '#':
-            continue
-        cmdline += l.rstrip() + ' '
-    if cmdline == '':
-        return ''
-    return cmdline
-
-def parse_all_addons(in_obj):
-    for el in in_obj.keys():
-        # addon found: copy it in our global dict uki_addons
-        if el.endswith('.addon'):
-            uki_addons[el] = in_obj[el]
-
-def recursively_find_addons(in_obj, folder_list):
-    # end of recursion, leaf directory. Search all addons here
-    if len(folder_list) == 0:
-        parse_all_addons(in_obj)
-        return
-
-    # first, check for common folder
-    if 'common' in in_obj:
-        parse_all_addons(in_obj['common'])
-
-    # second, check if there is a match with the searched folder
-    if folder_list[0] in in_obj:
-        folder_next = in_obj[folder_list[0]]
-        folder_list = folder_list[1:]
-        recursively_find_addons(folder_next, folder_list)
-
-def parse_in_json(in_json, uki_name, distro, arch):
-    with open(in_json, 'r') as f:
-        in_obj = json.load(f)
-    recursively_find_addons(in_obj, [uki_name, distro, arch])
-
-    for addon_name, cmdline in uki_addons.items():
-        addon_name = addon_name.replace(".addon","")
-        addon_full_name = f'{addon_name}-{uki_name}.{distro}.{arch}.addon.efi'
-        cmdline = parse_lines(cmdline).rstrip()
-        if cmdline:
-            uki_addons_list.append(UKICmdlineAddon(addon_full_name, cmdline))
-
-def create_addons(out_dir, sbat):
-    for uki_addon in uki_addons_list:
-        out_path = os.path.join(out_dir, uki_addon.name)
-        cmd = [
-            f'{UKIFY_PATH}', 'build',
-            '--cmdline', uki_addon.cmdline,
-            '--output', out_path]
-        if sbat:
-            cmd.extend(['--sbat', sbat.rstrip()])
-
-        subprocess.check_call(cmd, text=True)
-
-if __name__ == "__main__":
-    argc = len(sys.argv) - 1
-    if argc < 5 or argc > 6:
-        usage('too few or too many parameters!')
-
-    input_json = sys.argv[1]
-    out_dir = sys.argv[2]
-    uki_name = sys.argv[3]
-    distro = sys.argv[4]
-    arch = sys.argv[5]
-
-    custom_sbat = None
-    if argc == 6:
-        custom_sbat = sys.argv[6]
-
-    out_dir = check_clean_arguments(input_json, out_dir)
-    parse_in_json(input_json, uki_name, distro, arch)
-    create_addons(out_dir, custom_sbat)
-
-

x509.genkey.centos

@@ -1,16 +0,0 @@
-[ req ]
-default_bits = 3072
-distinguished_name = req_distinguished_name
-prompt = no
-x509_extensions = myexts
-
-[ req_distinguished_name ]
-O = The CentOS Project
-CN = CentOS Stream kernel signing key
-emailAddress = security@centos.org
-
-[ myexts ]
-basicConstraints=critical,CA:FALSE
-keyUsage=digitalSignature
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid

x509.genkey.fedora

@@ -1,16 +0,0 @@
-[ req ]
-default_bits = 4096
-distinguished_name = req_distinguished_name
-prompt = no
-x509_extensions = myexts
-
-[ req_distinguished_name ]
-O = Fedora
-CN = Fedora kernel signing key
-emailAddress = kernel-team@fedoraproject.org
-
-[ myexts ]
-basicConstraints=critical,CA:FALSE
-keyUsage=digitalSignature
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid

x509.genkey.rhel

@@ -1,16 +0,0 @@
-[ req ]
-default_bits = 3072
-distinguished_name = req_distinguished_name
-prompt = no
-x509_extensions = myexts
-
-[ req_distinguished_name ]
-O = Red Hat
-CN = Red Hat Enterprise Linux kernel signing key
-emailAddress = secalert@redhat.com
-
-[ myexts ]
-basicConstraints=critical,CA:FALSE
-keyUsage=digitalSignature
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid