diff --git a/.editorconfig b/.editorconfig index 87c4f98..b343f27 100644 --- a/.editorconfig +++ b/.editorconfig @@ -22,7 +22,7 @@ space_redirects = true shell_variant = bash # Use dracut code style for *-module-setup.sh -[*-module-setup.sh] +[*-module-setup.sh,dracut-early-kdump.sh] shell_variant = bash indent_style = space indent_size = 4 diff --git a/.packit.yaml b/.packit.yaml new file mode 100644 index 0000000..64b9c3a --- /dev/null +++ b/.packit.yaml @@ -0,0 +1,36 @@ +# See the documentation for more information: +# https://packit.dev/docs/configuration/ + +upstream_project_url: https://github.com/horms/kexec-tools.git + +specfile_path: kexec-tools.spec + +# add or remove files that should be synced +files_to_sync: + - kexec-tools.spec + - .packit.yaml + +# name in upstream package repository or registry (e.g. in PyPI) +upstream_package_name: kexec-tools +# downstream (Fedora) RPM package name +downstream_package_name: kexec-tools + +upstream_tag_template: v{version} + +jobs: + - job: pull_from_upstream + trigger: release + dist_git_branches: + - fedora-all + + - job: koji_build + trigger: commit + allowed_pr_authors: ["all_committers", "packit"] + dist_git_branches: + - fedora-all + + - job: bodhi_update + trigger: commit + allowed_builders: ["all_committers", "packit"] + dist_git_branches: + - fedora-all diff --git a/60-kdump.install b/60-kdump.install deleted file mode 100755 index 5b0e021..0000000 --- a/60-kdump.install +++ /dev/null @@ -1,36 +0,0 @@ -#!/usr/bin/bash - -COMMAND="$1" -KERNEL_VERSION="$2" -KDUMP_INITRD_DIR_ABS="$3" -KERNEL_IMAGE="$4" - -if ! [[ ${KERNEL_INSTALL_MACHINE_ID-x} ]]; then - exit 0 -fi - -if [[ -d "$KDUMP_INITRD_DIR_ABS" ]]; then - KDUMP_INITRD="initrdkdump" -else - # If `KDUMP_BOOTDIR` is not writable, then the kdump - # initrd must have been placed at `/var/lib/kdump` - if [[ ! -w "/boot" ]]; then - KDUMP_INITRD_DIR_ABS="/var/lib/kdump" - else - KDUMP_INITRD_DIR_ABS="/boot" - fi - KDUMP_INITRD="initramfs-${KERNEL_VERSION}kdump.img" -fi - -ret=0 -case "$COMMAND" in - add) - # Do nothing, kdump initramfs is strictly host only - # and managed by kdump service - ;; - remove) - rm -f -- "$KDUMP_INITRD_DIR_ABS/$KDUMP_INITRD" - ret=$? - ;; -esac -exit $ret diff --git a/92-crashkernel.install b/92-crashkernel.install deleted file mode 100755 index 1d67a13..0000000 --- a/92-crashkernel.install +++ /dev/null @@ -1,13 +0,0 @@ -#!/usr/bin/bash - -COMMAND="$1" -KERNEL_VERSION="$2" -KDUMP_INITRD_DIR_ABS="$3" -KERNEL_IMAGE="$4" - -case "$COMMAND" in -add) - kdumpctl reset-crashkernel-for-installed_kernel "$KERNEL_VERSION" - exit 0 - ;; -esac diff --git a/98-kexec.rules b/98-kexec.rules deleted file mode 100644 index b73b701..0000000 --- a/98-kexec.rules +++ /dev/null @@ -1,16 +0,0 @@ -SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload" -SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload" -SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" -SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" - -GOTO="kdump_reload_end" - -LABEL="kdump_reload" - -# If kdump is not loaded, calling kdump-udev-throttle will end up -# doing nothing, but systemd-run will always generate extra logs for -# each call, so trigger the kdump-udev-throttler only if kdump -# service is active to avoid unnecessary logs -RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" - -LABEL="kdump_reload_end" diff --git a/98-kexec.rules.ppc64 b/98-kexec.rules.ppc64 deleted file mode 100644 index a1c00a9..0000000 --- a/98-kexec.rules.ppc64 +++ /dev/null @@ -1,22 +0,0 @@ -SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload_cpu" -SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload_mem" -SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload_mem" - -GOTO="kdump_reload_end" - -# If kdump is not loaded, calling kdump-udev-throttle will end up -# doing nothing, but systemd-run will always generate extra logs for -# each call, so trigger the kdump-udev-throttler only if kdump -# service is active to avoid unnecessary logs - -LABEL="kdump_reload_mem" - -RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" - -GOTO="kdump_reload_end" - -LABEL="kdump_reload_cpu" - -RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; ! test -f /sys/kernel/fadump_enabled || cat /sys/kernel/fadump_enabled | grep 0 || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" - -LABEL="kdump_reload_end" diff --git a/README.packit b/README.packit new file mode 100644 index 0000000..fb341a1 --- /dev/null +++ b/README.packit @@ -0,0 +1,3 @@ +This repository is maintained by packit. +https://packit.dev/ +The file was generated using packit 1.11.0.post1.dev7+gfdcdf3a32. diff --git a/crashkernel-howto.txt b/crashkernel-howto.txt deleted file mode 100644 index 54e1141..0000000 --- a/crashkernel-howto.txt +++ /dev/null @@ -1,120 +0,0 @@ -Introduction -============ - -This document describes features the kexec-tools package provides for setting -and estimating the crashkernel value. - -Kdump lives in a pre-reserved chunk of memory, and the size of the reserved -memory is specified by the `crashkernel=` kernel parameter. It's hard to -estimate an accurate `crashkernel=` value, so it's always recommended to test -kdump after you updated the `crashkernel=` value or changed the dump target. - - -Default crashkernel value -========================= - -Latest kexec-tools provides "kdumpctl get-default-crashkernel" to retrieve -the default crashkernel value, - - $ echo $(kdumpctl get-default-crashkernel) - 1G-4G:192M,4G-64G:256M,64G-:512M - -It will be taken as the default value of 'crashkernel=', you can use -this value as a reference for setting crashkernel value manually. - - -New installed system -==================== - -Anaconda is the OS installer which sets all the kernel boot cmdline on a newly -installed system. If kdump is enabled during Anaconda installation, Anaconda -will use the default crashkernel value as the default `crashkernel=` value on -the newly installed system. - -Users can override the value during Anaconda installation manually. - - -Auto update of crashkernel boot parameter -========================================= - -A new release of kexec-tools could update the default crashkernel value. By -default, kexec-tools would reset crashkernel to the new default value if it -detects the old default crashkernel value is used by installed kernels. If you -don't want kexec-tools to update the old default crashkernel to the new default -crashkernel, you can change auto_reset_crashkernel to no in kdump.conf. - -Supported Bootloaders ---------------------- - -This auto update only works with GRUB2 and ZIPL, as kexec-tools heavily depends -on `grubby`. If other boot loaders are used, the user will have to update the -`crashkernel=` value manually. - - -Reset crashkernel to default value -================================== - -kexec-tools only perform the auto update of crashkernel value when it can -confirm the boot kernel's crashkernel value is using its corresponding default -value and auto_reset_crashkernel=yes in kdump.conf. In other cases, the user -can reset the crashkernel value by themselves. - -Reset using kdumpctl --------------------- - -To make it easier to reset the `crashkernel=` kernel cmdline to this default -value properly, `kdumpctl` also provides a sub-command: - - `kdumpctl reset-crashkernel [--kernel=path_to_kernel] [--reboot]` - -This command will reset the bootloader's kernel cmdline to the default value. -It will also update bootloader config if the bootloader has a standalone config -file. User will have to reboot the machine after this command to make it take -effect if --reboot is not specified. For more details, please refer to the -reset-crashkernel command in `man kdumpctl`. - -Reset manually --------------- - -To reset the crashkernel value manually, it's recommended to use utils like -`grubby`. A one liner script for resetting `crashkernel=` value of all installed -kernels to the default value is: - - grubby --update-kernel ALL --args "crashkernel=$(kdumpctl get-default-crashkernel)" - -NOTE: On s390x you also need to run zipl for the change to take effect. - -Estimate crashkernel -==================== - -The best way to estimate a usable crashkernel value is by testing kdump -manually. And you can set crashkernel to a large value, then adjust the -crashkernel value to an acceptable value gradually. - -`kdumpctl` also provides a sub-command for doing rough estimating without -triggering kdump: - - `kdumpctl estimate` - -The output will be like this: - -``` - Encrypted kdump target requires extra memory, assuming using the keyslot with minimum memory requirement - - Reserved crashkernel: 256M - Recommended crashkernel: 655M - - Kernel image size: 47M - Kernel modules size: 12M - Initramfs size: 19M - Runtime reservation: 64M - LUKS required size: 512M - Large modules: - xfs: 1892352 - nouveau: 2318336 - WARNING: Current crashkernel size is lower than recommended size 655M. -``` - -It will generate a summary report about the estimated memory consumption -of each component of kdump. The value may not be accurate enough, but -would be a good start for finding a suitable crashkernel value. diff --git a/dracut-early-kdump-module-setup.sh b/dracut-early-kdump-module-setup.sh deleted file mode 100755 index 0451118..0000000 --- a/dracut-early-kdump-module-setup.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/bash - -. /etc/sysconfig/kdump - -KDUMP_KERNEL="" -KDUMP_INITRD="" - -check() { - if [[ ! -f /etc/sysconfig/kdump ]] || [[ ! -f /lib/kdump/kdump-lib.sh ]] \ - || [[ -n ${IN_KDUMP} ]]; then - return 1 - fi - return 255 -} - -depends() { - echo "base shutdown" - return 0 -} - -prepare_kernel_initrd() { - . /lib/kdump/kdump-lib.sh - - prepare_kdump_bootinfo - - # $kernel is a variable from dracut - if [[ $KDUMP_KERNELVER != "$kernel" ]]; then - dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \ - "but the initramfs is generated for kernel version '$kernel'" - fi -} - -install() { - prepare_kernel_initrd - if [[ ! -f $KDUMP_KERNEL ]]; then - derror "Could not find required kernel for earlykdump," \ - "earlykdump will not work!" - return 1 - fi - if [[ ! -f $KDUMP_INITRD ]]; then - derror "Could not find required kdump initramfs for earlykdump," \ - "please ensure kdump initramfs is generated first," \ - "earlykdump will not work!" - return 1 - fi - - inst_multiple tail find cut dirname hexdump - inst_simple "/etc/sysconfig/kdump" - inst_binary "/usr/sbin/kexec" - inst_binary "/usr/bin/gawk" "/usr/bin/awk" - inst_binary "/usr/bin/logger" "/usr/bin/logger" - inst_binary "/usr/bin/printf" "/usr/bin/printf" - inst_binary "/usr/bin/xargs" "/usr/bin/xargs" - inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh" - inst_script "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump/kdump-lib-initramfs.sh" - inst_script "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh" - inst_hook cmdline 00 "$moddir/early-kdump.sh" - inst_binary "$KDUMP_KERNEL" - inst_binary "$KDUMP_INITRD" - - ln_r "$KDUMP_KERNEL" "/boot/kernel-earlykdump" - ln_r "$KDUMP_INITRD" "/boot/initramfs-earlykdump" - - chmod -x "${initdir}/$KDUMP_KERNEL" -} diff --git a/dracut-early-kdump.sh b/dracut-early-kdump.sh deleted file mode 100755 index 45ee6dc..0000000 --- a/dracut-early-kdump.sh +++ /dev/null @@ -1,84 +0,0 @@ -#! /bin/sh - -KEXEC=/sbin/kexec -standard_kexec_args="-p" - -EARLY_KDUMP_INITRD="" -EARLY_KDUMP_KERNEL="" -EARLY_KDUMP_CMDLINE="" -EARLY_KDUMP_KERNELVER="" -EARLY_KEXEC_ARGS="" - -. /etc/sysconfig/kdump -. /lib/dracut-lib.sh -. /lib/kdump-lib.sh -. /lib/kdump-logger.sh - -# initiate the kdump logger -if ! dlog_init; then - echo "failed to initiate the kdump logger." - exit 1 -fi - -prepare_parameters() -{ - EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}") - EARLY_KDUMP_KERNEL="/boot/kernel-earlykdump" - EARLY_KDUMP_INITRD="/boot/initramfs-earlykdump" -} - -early_kdump_load() -{ - if ! check_kdump_feasibility; then - return 1 - fi - - if is_fadump_capable; then - dwarn "WARNING: early kdump doesn't support fadump." - return 1 - fi - - if check_current_kdump_status; then - return 1 - fi - - prepare_parameters - - EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}") - - if is_secure_boot_enforced; then - dinfo "Secure Boot is enabled. Using kexec file based syscall." - EARLY_KEXEC_ARGS="$EARLY_KEXEC_ARGS -s" - fi - - # Here, only output the messages, but do not save these messages - # to a file because the target disk may not be mounted yet, the - # earlykdump is too early. - ddebug "earlykdump: $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \ - --command-line=$EARLY_KDUMP_CMDLINE --initrd=$EARLY_KDUMP_INITRD \ - $EARLY_KDUMP_KERNEL" - - if $KEXEC $EARLY_KEXEC_ARGS $standard_kexec_args \ - --command-line="$EARLY_KDUMP_CMDLINE" \ - --initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL; then - dinfo "kexec: loaded early-kdump kernel" - return 0 - else - derror "kexec: failed to load early-kdump kernel" - return 1 - fi -} - -set_early_kdump() -{ - if getargbool 0 rd.earlykdump; then - dinfo "early-kdump is enabled." - early_kdump_load - else - dinfo "early-kdump is disabled." - fi - - return 0 -} - -set_early_kdump diff --git a/dracut-fadump-init-fadump.sh b/dracut-fadump-init-fadump.sh deleted file mode 100755 index 94a3751..0000000 --- a/dracut-fadump-init-fadump.sh +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -export PATH=/usr/bin:/usr/sbin -export SYSTEMD_IN_INITRD=lenient - -[ -e /proc/mounts ] || - (mkdir -p /proc && mount -t proc -o nosuid,noexec,nodev proc /proc) - -grep -q '^sysfs /sys sysfs' /proc/mounts || - (mkdir -p /sys && mount -t sysfs -o nosuid,noexec,nodev sysfs /sys) - -grep -q '^none / ' /proc/mounts || grep -q '^rootfs / ' /proc/mounts && ROOTFS_IS_RAMFS=1 - -if [ -f /proc/device-tree/rtas/ibm,kernel-dump ] || [ -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then - mkdir /newroot - mount -t ramfs ramfs /newroot - - if [ $ROOTFS_IS_RAMFS ]; then - for FILE in $(ls -A /fadumproot/); do - mv /fadumproot/$FILE /newroot/ - done - exec switch_root /newroot /init - else - mkdir /newroot/sys /newroot/proc /newroot/dev /newroot/run /newroot/oldroot - - grep -q '^devtmpfs /dev devtmpfs' /proc/mounts && mount --move /dev /newroot/dev - grep -q '^tmpfs /run tmpfs' /proc/mounts && mount --move /run /newroot/run - mount --move /sys /newroot/sys - mount --move /proc /newroot/proc - - cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr /fadumproot/. /newroot/ - cd /newroot && pivot_root . oldroot - - loop=1 - while [ $loop ]; do - unset loop - while read -r _ mp _; do - case $mp in - /oldroot/*) umount -d "$mp" && loop=1 ;; - esac - done $KDUMP_CONF_PARSED - -get_kdump_confs() -{ - while read -r config_opt config_val; do - # remove inline comments after the end of a directive. - case "$config_opt" in - path) - KDUMP_PATH="$config_val" - ;; - core_collector) - [ -n "$config_val" ] && CORE_COLLECTOR="$config_val" - ;; - sshkey) - if [ -f "$config_val" ]; then - SSH_KEY_LOCATION=$config_val - fi - ;; - kdump_pre) - KDUMP_PRE="$config_val" - ;; - kdump_post) - KDUMP_POST="$config_val" - ;; - fence_kdump_args) - FENCE_KDUMP_ARGS="$config_val" - ;; - fence_kdump_nodes) - FENCE_KDUMP_NODES="$config_val" - ;; - failure_action | default) - case $config_val in - shell) - FAILURE_ACTION="kdump_emergency_shell" - ;; - reboot) - FAILURE_ACTION="systemctl reboot -f && exit" - ;; - halt) - FAILURE_ACTION="halt && exit" - ;; - poweroff) - FAILURE_ACTION="systemctl poweroff -f && exit" - ;; - dump_to_rootfs) - FAILURE_ACTION="dump_to_rootfs" - ;; - esac - ;; - final_action) - case $config_val in - reboot) - FINAL_ACTION="systemctl reboot -f" - ;; - halt) - FINAL_ACTION="halt" - ;; - poweroff) - FINAL_ACTION="systemctl poweroff -f" - ;; - esac - ;; - esac - done < "$KDUMP_CONF_PARSED" - - if [ -z "$CORE_COLLECTOR" ]; then - CORE_COLLECTOR="$DEFAULT_CORE_COLLECTOR" - if is_ssh_dump_target || is_raw_dump_target; then - CORE_COLLECTOR="$CORE_COLLECTOR -F" - fi - fi -} - -# store the kexec kernel log to a file. -save_log() -{ - # LOG_OP is empty when log can't be saved, eg. raw target - [ -n "$KDUMP_LOG_OP" ] || return - - dmesg -T > $KDUMP_LOG_FILE - - if command -v journalctl > /dev/null; then - journalctl -ab >> $KDUMP_LOG_FILE - fi - chmod 600 $KDUMP_LOG_FILE - - dinfo "saving the $KDUMP_LOG_FILE to $KDUMP_LOG_DEST/" - - eval "$KDUMP_LOG_OP" -} - -# $1: dump path, must be a mount point -dump_fs() -{ - ddebug "dump_fs _mp=$1" - - if ! is_mounted "$1"; then - dinfo "dump path '$1' is not mounted, trying to mount..." - if ! mount --target "$1"; then - derror "failed to dump to '$1', it's not a mount point!" - return 1 - fi - fi - - # Remove -F in makedumpfile case. We don't want a flat format dump here. - case $CORE_COLLECTOR in - *makedumpfile*) - CORE_COLLECTOR=$(echo "$CORE_COLLECTOR" | sed -e "s/-F//g") - ;; - esac - - _dump_fs_path=$(echo "$1/$KDUMP_PATH/$HOST_IP-$DATEDIR/" | tr -s /) - dinfo "saving to $_dump_fs_path" - - # Only remount to read-write mode if the dump target is mounted read-only. - _dump_mnt_op=$(get_mount_info OPTIONS target "$1" -f) - case $_dump_mnt_op in - ro*) - dinfo "Remounting the dump target in rw mode." - mount -o remount,rw "$1" || return 1 - ;; - esac - - mkdir -p "$_dump_fs_path" || return 1 - - save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_dump_fs_path" - save_opalcore_fs "$_dump_fs_path" - - dinfo "saving vmcore" - KDUMP_LOG_DEST=$_dump_fs_path/ - KDUMP_LOG_OP="mv '$KDUMP_LOG_FILE' '$KDUMP_LOG_DEST/'" - - $CORE_COLLECTOR /proc/vmcore "$_dump_fs_path/vmcore-incomplete" - _dump_exitcode=$? - if [ $_dump_exitcode -eq 0 ]; then - mv "$_dump_fs_path/vmcore-incomplete" "$_dump_fs_path/vmcore" - sync - dinfo "saving vmcore complete" - else - derror "saving vmcore failed, exitcode:$_dump_exitcode" - return 1 - fi - - # improper kernel cmdline can cause the failure of echo, we can ignore this kind of failure - return 0 -} - -# $1: dmesg collector -# $2: dump path -save_vmcore_dmesg_fs() -{ - dinfo "saving vmcore-dmesg.txt to $2" - if $1 /proc/vmcore > "$2/vmcore-dmesg-incomplete.txt"; then - mv "$2/vmcore-dmesg-incomplete.txt" "$2/vmcore-dmesg.txt" - chmod 600 "$2/vmcore-dmesg.txt" - - # Make sure file is on disk. There have been instances where later - # saving vmcore failed and system rebooted without sync and there - # was no vmcore-dmesg.txt available. - sync - dinfo "saving vmcore-dmesg.txt complete" - else - if [ -f "$2/vmcore-dmesg-incomplete.txt" ]; then - chmod 600 "$2/vmcore-dmesg-incomplete.txt" - fi - derror "saving vmcore-dmesg.txt failed" - fi -} - -# $1: dump path -save_opalcore_fs() -{ - if [ ! -f $OPALCORE ]; then - # Check if we are on an old kernel that uses a different path - if [ -f /sys/firmware/opal/core ]; then - OPALCORE="/sys/firmware/opal/core" - else - return 0 - fi - fi - - dinfo "saving opalcore:$OPALCORE to $1/opalcore" - if ! cp $OPALCORE "$1/opalcore"; then - derror "saving opalcore failed" - return 1 - fi - - sync - dinfo "saving opalcore complete" - return 0 -} - -dump_to_rootfs() -{ - - if [ "$(systemctl status dracut-initqueue | sed -n "s/^\s*Active: \(\S*\)\s.*$/\1/p")" = "inactive" ]; then - dinfo "Trying to bring up initqueue for rootfs mount" - systemctl start dracut-initqueue - fi - - dinfo "Clean up dead systemd services" - systemctl cancel - dinfo "Waiting for rootfs mount, will timeout after 90 seconds" - systemctl start --no-block sysroot.mount - - _loop=0 - while [ $_loop -lt 90 ] && ! is_mounted /sysroot; do - sleep 1 - _loop=$((_loop + 1)) - done - - if ! is_mounted /sysroot; then - derror "Failed to mount rootfs" - return - fi - - ddebug "NEWROOT=$NEWROOT" - dump_fs $NEWROOT -} - -kdump_emergency_shell() -{ - ddebug "Switching to kdump emergency shell..." - - [ -f /etc/profile ] && . /etc/profile - export PS1='kdump:${PWD}# ' - - . /lib/dracut-lib.sh - if [ -f /dracut-state.sh ]; then - . /dracut-state.sh 2> /dev/null - fi - - source_conf /etc/conf.d - - type plymouth > /dev/null 2>&1 && plymouth quit - - source_hook "emergency" - while read -r _tty rest; do - ( - echo - echo - echo 'Entering kdump emergency mode.' - echo 'Type "journalctl" to view system logs.' - echo 'Type "rdsosreport" to generate a sosreport, you can then' - echo 'save it elsewhere and attach it to a bug report.' - echo - echo - ) > "/dev/$_tty" - done < /proc/consoles - sh -i -l - /bin/rm -f -- /.console_lock -} - -do_failure_action() -{ - dinfo "Executing failure action $FAILURE_ACTION" - eval $FAILURE_ACTION -} - -do_final_action() -{ - dinfo "Executing final action $FINAL_ACTION" - eval $FINAL_ACTION -} - -do_dump() -{ - eval $DUMP_INSTRUCTION - _ret=$? - - if [ $_ret -ne 0 ]; then - derror "saving vmcore failed" - fi - - return $_ret -} - -do_kdump_pre() -{ - if [ -n "$KDUMP_PRE" ]; then - "$KDUMP_PRE" - _ret=$? - if [ $_ret -ne 0 ]; then - derror "$KDUMP_PRE exited with $_ret status" - return $_ret - fi - fi - - # if any script fails, it just raises warning and continues - if [ -d /etc/kdump/pre.d ]; then - for file in /etc/kdump/pre.d/*; do - "$file" - _ret=$? - if [ $_ret -ne 0 ]; then - derror "$file exited with $_ret status" - fi - done - fi - return 0 -} - -do_kdump_post() -{ - if [ -d /etc/kdump/post.d ]; then - for file in /etc/kdump/post.d/*; do - "$file" "$1" - _ret=$? - if [ $_ret -ne 0 ]; then - derror "$file exited with $_ret status" - fi - done - fi - - if [ -n "$KDUMP_POST" ]; then - "$KDUMP_POST" "$1" - _ret=$? - if [ $_ret -ne 0 ]; then - derror "$KDUMP_POST exited with $_ret status" - fi - fi -} - -# $1: block target, eg. /dev/sda -dump_raw() -{ - [ -b "$1" ] || return 1 - - dinfo "saving to raw disk $1" - - if ! echo "$CORE_COLLECTOR" | grep -q makedumpfile; then - _src_size=$(stat --format %s /proc/vmcore) - _src_size_mb=$((_src_size / 1048576)) - /kdumpscripts/monitor_dd_progress $_src_size_mb & - fi - - dinfo "saving vmcore" - $CORE_COLLECTOR /proc/vmcore | dd of="$1" bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1 - sync - - dinfo "saving vmcore complete" - return 0 -} - -# $1: ssh key file -# $2: ssh address in @ format -dump_ssh() -{ - _ret=0 - _ssh_opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes" - _ssh_dir="$KDUMP_PATH/$HOST_IP-$DATEDIR" - if is_ipv6_address "$2"; then - _scp_address=${2%@*}@"[${2#*@}]" - else - _scp_address=$2 - fi - - dinfo "saving to $2:$_ssh_dir" - - cat /var/lib/random-seed > /dev/urandom - ssh -q $_ssh_opt "$2" mkdir -p "$_ssh_dir" || return 1 - - save_vmcore_dmesg_ssh "$DMESG_COLLECTOR" "$_ssh_dir" "$_ssh_opt" "$2" - - dinfo "saving vmcore" - - KDUMP_LOG_DEST=$2:$_ssh_dir/ - KDUMP_LOG_OP="scp -q $_ssh_opt '$KDUMP_LOG_FILE' '$_scp_address:$_ssh_dir/'" - - save_opalcore_ssh "$_ssh_dir" "$_ssh_opt" "$2" "$_scp_address" - - if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then - scp -q $_ssh_opt /proc/vmcore "$_scp_address:$_ssh_dir/vmcore-incomplete" - _ret=$? - _vmcore="vmcore" - else - $CORE_COLLECTOR /proc/vmcore | ssh $_ssh_opt "$2" "umask 0077 && dd bs=512 of='$_ssh_dir/vmcore-incomplete'" - _ret=$? - _vmcore="vmcore.flat" - fi - - if [ $_ret -eq 0 ]; then - ssh $_ssh_opt "$2" "mv '$_ssh_dir/vmcore-incomplete' '$_ssh_dir/$_vmcore'" - _ret=$? - if [ $_ret -ne 0 ]; then - derror "moving vmcore failed, exitcode:$_ret" - else - dinfo "saving vmcore complete" - fi - else - derror "saving vmcore failed, exitcode:$_ret" - fi - - return $_ret -} - -# $1: dump path -# $2: ssh opts -# $3: ssh address in @ format -# $4: scp address, similar with ssh address but IPv6 addresses are quoted -save_opalcore_ssh() -{ - if [ ! -f $OPALCORE ]; then - # Check if we are on an old kernel that uses a different path - if [ -f /sys/firmware/opal/core ]; then - OPALCORE="/sys/firmware/opal/core" - else - return 0 - fi - fi - - dinfo "saving opalcore:$OPALCORE to $3:$1" - - if ! scp $2 $OPALCORE "$4:$1/opalcore-incomplete"; then - derror "saving opalcore failed" - return 1 - fi - - ssh $2 "$3" mv "$1/opalcore-incomplete" "$1/opalcore" - dinfo "saving opalcore complete" - return 0 -} - -# $1: dmesg collector -# $2: dump path -# $3: ssh opts -# $4: ssh address in @ format -save_vmcore_dmesg_ssh() -{ - dinfo "saving vmcore-dmesg.txt to $4:$2" - if $1 /proc/vmcore | ssh $3 "$4" "umask 0077 && dd of='$2/vmcore-dmesg-incomplete.txt'"; then - ssh -q $3 "$4" mv "$2/vmcore-dmesg-incomplete.txt" "$2/vmcore-dmesg.txt" - dinfo "saving vmcore-dmesg.txt complete" - else - derror "saving vmcore-dmesg.txt failed" - fi -} - -get_host_ip() -{ - if is_nfs_dump_target || is_ssh_dump_target; then - kdumpnic=$(getarg kdumpnic=) - if [ -z "$kdumpnic" ]; then - derror "failed to get kdumpnic!" - return 1 - fi - if ! kdumphost=$(ip addr show dev "$kdumpnic" | grep '[ ]*inet'); then - derror "wrong kdumpnic: $kdumpnic" - return 1 - fi - kdumphost=$(echo "$kdumphost" | head -n 1 | awk '{print $2}') - kdumphost="${kdumphost%%/*}" - if [ -z "$kdumphost" ]; then - derror "wrong kdumpnic: $kdumpnic" - return 1 - fi - HOST_IP=$kdumphost - fi - return 0 -} - -read_kdump_confs() -{ - if [ ! -f "$KDUMP_CONFIG_FILE" ]; then - derror "$KDUMP_CONFIG_FILE not found" - return - fi - - get_kdump_confs - - # rescan for add code for dump target - while read -r config_opt config_val; do - # remove inline comments after the end of a directive. - case "$config_opt" in - dracut_args) - config_val=$(get_dracut_args_target "$config_val") - if [ -n "$config_val" ]; then - config_val=$(get_mntpoint_from_target "$config_val") - DUMP_INSTRUCTION="dump_fs $config_val" - fi - ;; - ext[234] | xfs | btrfs | minix | nfs) - config_val=$(get_mntpoint_from_target "$config_val") - DUMP_INSTRUCTION="dump_fs $config_val" - ;; - raw) - DUMP_INSTRUCTION="dump_raw $config_val" - ;; - ssh) - DUMP_INSTRUCTION="dump_ssh $SSH_KEY_LOCATION $config_val" - ;; - esac - done < "$KDUMP_CONF_PARSED" -} - -fence_kdump_notify() -{ - if [ -n "$FENCE_KDUMP_NODES" ]; then - # shellcheck disable=SC2086 - $FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES & - fi -} - -if [ "$1" = "--error-handler" ]; then - get_kdump_confs - do_failure_action - do_final_action - - exit $? -fi - -# continue here only if we have to save dump. -if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ] && [ ! -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then - exit 0 -fi - -read_kdump_confs -fence_kdump_notify - -if ! get_host_ip; then - derror "get_host_ip exited with non-zero status!" - exit 1 -fi - -if [ -z "$DUMP_INSTRUCTION" ]; then - DUMP_INSTRUCTION="dump_fs $NEWROOT" -fi - -if ! do_kdump_pre; then - derror "kdump_pre script exited with non-zero status!" - do_final_action - # During systemd service to reboot the machine, stop this shell script running - exit 1 -fi -make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab' -do_dump -DUMP_RETVAL=$? - -if ! do_kdump_post $DUMP_RETVAL; then - derror "kdump_post script exited with non-zero status!" -fi - -save_log - -if [ $DUMP_RETVAL -ne 0 ]; then - exit 1 -fi - -do_final_action diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh deleted file mode 100755 index 4c6096a..0000000 --- a/dracut-module-setup.sh +++ /dev/null @@ -1,1092 +0,0 @@ -#!/bin/bash - -kdump_module_init() { - if ! [[ -d "${initdir}/tmp" ]]; then - mkdir -p "${initdir}/tmp" - fi - - . /lib/kdump/kdump-lib.sh -} - -check() { - [[ $debug ]] && set -x - #kdumpctl sets this explicitly - if [[ -z $IN_KDUMP ]] || [[ ! -f /etc/kdump.conf ]]; then - return 1 - fi - return 0 -} - -depends() { - local _dep="base shutdown" - - kdump_module_init - - add_opt_module() { - [[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1" - } - - if is_squash_available; then - add_opt_module squash - else - dwarning "Required modules to build a squashed kdump image is missing!" - fi - - if is_wdt_active; then - add_opt_module watchdog - fi - - if is_ssh_dump_target; then - _dep="$_dep ssh-client" - fi - - if [[ "$(uname -m)" == "s390x" ]]; then - _dep="$_dep znet" - fi - - if [[ -n "$(ls -A /sys/class/drm 2> /dev/null)" ]] || [[ -d /sys/module/hyperv_fb ]]; then - add_opt_module drm - fi - - if is_generic_fence_kdump || is_pcs_fence_kdump; then - _dep="$_dep network" - fi - - echo "$_dep" -} - -kdump_is_bridge() { - [[ -d /sys/class/net/"$1"/bridge ]] -} - -kdump_is_bond() { - [[ -d /sys/class/net/"$1"/bonding ]] -} - -kdump_is_team() { - [[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null -} - -kdump_is_vlan() { - [[ -f /proc/net/vlan/"$1" ]] -} - -# $1: netdev name -source_ifcfg_file() { - local ifcfg_file - - dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager." - ifcfg_file=$(get_ifcfg_filename "$1") - if [[ -f ${ifcfg_file} ]]; then - . "${ifcfg_file}" - else - dwarning "The ifcfg file of $1 is not found!" - fi -} - -kdump_setup_dns() { - local _netdev="$1" - local _conpath="$2" - local _nameserver _dns _tmp array - local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf - - _tmp=$(get_nmcli_field_by_conpath "IP4.DNS" "$_conpath") - # shellcheck disable=SC2206 - array=(${_tmp//|/ }) - if [[ ${array[*]} ]]; then - for _dns in "${array[@]}"; do - echo "nameserver=$_dns" >> "$_dnsfile" - done - else - dwarning "Failed to get DNS info via nmcli output. Now try sourcing ifcfg script" - source_ifcfg_file "$_netdev" - [[ -n $DNS1 ]] && echo "nameserver=$DNS1" > "$_dnsfile" - [[ -n $DNS2 ]] && echo "nameserver=$DNS2" >> "$_dnsfile" - fi - - while read -r content; do - _nameserver=$(echo "$content" | grep ^nameserver) - [[ -z $_nameserver ]] && continue - - _dns=$(echo "$_nameserver" | awk '{print $2}') - [[ -z $_dns ]] && continue - - if [[ ! -f $_dnsfile ]] || ! grep -q "$_dns" "$_dnsfile"; then - echo "nameserver=$_dns" >> "$_dnsfile" - fi - done < "/etc/resolv.conf" -} - -# $1: repeat times -# $2: string to be repeated -# $3: separator -repeatedly_join_str() { - local _count="$1" - local _str="$2" - local _separator="$3" - local i _res - - if [[ $_count -le 0 ]]; then - echo -n "" - return - fi - - i=0 - _res="$_str" - ((_count--)) - - while [[ $i -lt $_count ]]; do - ((i++)) - _res="${_res}${_separator}${_str}" - done - echo -n "$_res" -} - -# $1: prefix -# $2: ipv6_flag="-6" indicates it's IPv6 -# Given a prefix, calculate the netmask (equivalent of "ipcalc -m") -# by concatenating three parts, -# 1) the groups with all bits set 1 -# 2) a group with partial bits set to 0 -# 3) the groups with all bits set to 0 -cal_netmask_by_prefix() { - local _prefix="$1" - local _ipv6_flag="$2" _ipv6 - local _bits_per_octet=8 - local _count _res _octets_per_group _octets_total _seperator _total_groups - local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits - - if [[ $_ipv6_flag == "-6" ]]; then - _ipv6=1 - else - _ipv6=0 - fi - - if [[ $_prefix -lt 0 || $_prefix -gt 128 ]] \ - || ( ((!_ipv6)) && [[ $_prefix -gt 32 ]]); then - derror "Bad prefix:$_prefix for calculating netmask" - exit 1 - fi - - if ((_ipv6)); then - _octets_per_group=2 - _octets_total=16 - _seperator=":" - else - _octets_per_group=1 - _octets_total=4 - _seperator="." - fi - - _total_groups=$((_octets_total / _octets_per_group)) - _bits_per_group=$((_octets_per_group * _bits_per_octet)) - _max_group_value=$(((1 << _bits_per_group) - 1)) - - if ((_ipv6)); then - _max_group_value_repr=$(printf "%x" $_max_group_value) - else - _max_group_value_repr="$_max_group_value" - fi - - _count=$((_prefix / _octets_per_group / _bits_per_octet)) - _first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator") - _res="$_first_part" - - _tmp=$((_octets_total * _bits_per_octet - _prefix)) - _zero_bits=$((_tmp % _bits_per_group)) - if [[ $_zero_bits -ne 0 ]]; then - _second_part=$((_max_group_value >> _zero_bits << _zero_bits)) - if ((_ipv6)); then - _second_part=$(printf "%x" $_second_part) - fi - ((_count++)) - if [[ -z $_first_part ]]; then - _res="$_second_part" - else - _res="${_first_part}${_seperator}${_second_part}" - fi - fi - - _count=$((_total_groups - _count)) - if [[ $_count -eq 0 ]]; then - echo -n "$_res" - return - fi - - if ((_ipv6)) && [[ $_count -gt 1 ]]; then - # use condensed notion for IPv6 - _third_part=":" - else - _third_part=$(repeatedly_join_str "$_count" "0" "$_seperator") - fi - - if [[ -z $_res ]] && ((!_ipv6)); then - echo -n "${_third_part}" - else - echo -n "${_res}${_seperator}${_third_part}" - fi -} - -#$1: netdev name -#$2: srcaddr -#if it use static ip echo it, or echo null -kdump_static_ip() { - local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag - local _netmask _gateway _ipaddr _target _nexthop _prefix - - _ipaddr=$(ip addr show dev "$_netdev" permanent | awk "/ $_srcaddr\/.* /{print \$2}") - - if is_ipv6_address "$_srcaddr"; then - _ipv6_flag="-6" - fi - - if [[ -n $_ipaddr ]]; then - _gateway=$(ip $_ipv6_flag route list dev "$_netdev" \ - | awk '/^default /{print $3}' | head -n 1) - - if [[ "x" != "x"$_ipv6_flag ]]; then - # _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/" - _netmask=${_ipaddr#*\/} - _srcaddr="[$_srcaddr]" - _gateway="[$_gateway]" - else - _prefix=$(cut -d'/' -f2 <<< "$_ipaddr") - if ! _netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag"); then - derror "Failed to calculate netmask for $_ipaddr" - exit 1 - fi - fi - echo -n "${_srcaddr}::${_gateway}:${_netmask}::" - fi - - /sbin/ip $_ipv6_flag route show | grep -v default \ - | grep ".*via.* $_netdev " | grep -v "^[[:space:]]*nexthop" \ - | while read -r _route; do - _target=$(echo "$_route" | awk '{print $1}') - _nexthop=$(echo "$_route" | awk '{print $3}') - if [[ "x" != "x"$_ipv6_flag ]]; then - _target="[$_target]" - _nexthop="[$_nexthop]" - fi - echo "rd.route=$_target:$_nexthop:$kdumpnic" - done >> "${initdir}/etc/cmdline.d/45route-static.conf" - - kdump_handle_mulitpath_route "$_netdev" "$_srcaddr" "$kdumpnic" -} - -kdump_handle_mulitpath_route() { - local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag - local _target _nexthop _route _weight _max_weight _rule - - if is_ipv6_address "$_srcaddr"; then - _ipv6_flag="-6" - fi - - while IFS="" read -r _route; do - if [[ $_route =~ [[:space:]]+nexthop ]]; then - _route=${_route##[[:space:]]} - # Parse multipath route, using previous _target - [[ $_target == 'default' ]] && continue - [[ $_route =~ .*via.*\ $_netdev ]] || continue - - _weight=$(echo "$_route" | cut -d ' ' -f7) - if [[ $_weight -gt $_max_weight ]]; then - _nexthop=$(echo "$_route" | cut -d ' ' -f3) - _max_weight=$_weight - if [[ "x" != "x"$_ipv6_flag ]]; then - _rule="rd.route=[$_target]:[$_nexthop]:$kdumpnic" - else - _rule="rd.route=$_target:$_nexthop:$kdumpnic" - fi - fi - else - [[ -n $_rule ]] && echo "$_rule" - _target=$(echo "$_route" | cut -d ' ' -f1) - _rule="" _max_weight=0 _weight=0 - fi - done >> "${initdir}/etc/cmdline.d/45route-static.conf" \ - <<< "$(/sbin/ip $_ipv6_flag route show)" - - [[ -n $_rule ]] && echo "$_rule" >> "${initdir}/etc/cmdline.d/45route-static.conf" -} - -kdump_get_mac_addr() { - cat "/sys/class/net/$1/address" -} - -#Bonding or team master modifies the mac address -#of its slaves, we should use perm address -kdump_get_perm_addr() { - local addr - addr=$(ethtool -P "$1" | sed -e 's/Permanent address: //') - if [[ -z $addr ]] || [[ $addr == "00:00:00:00:00:00" ]]; then - derror "Can't get the permanent address of $1" - else - echo "$addr" - fi -} - -# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0 -# Because kernel assigned names are not persistent between 1st and 2nd -# kernel. We could probably end up with eth0 being eth1, eth0 being -# eth1, and naming conflict happens. -kdump_setup_ifname() { - local _ifname - - # If ifname already has 'kdump-' prefix, we must be switching from - # fadump to kdump. Skip prefixing 'kdump-' in this case as adding - # another prefix may truncate the ifname. Since an ifname with - # 'kdump-' is already persistent, this should be fine. - if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then - _ifname="kdump-$1" - else - _ifname="$1" - fi - - echo "$_ifname" -} - -kdump_setup_bridge() { - local _netdev=$1 - local _brif _dev _mac _kdumpdev - for _dev in "/sys/class/net/$_netdev/brif/"*; do - [[ -e $_dev ]] || continue - _dev=${_dev##*/} - _kdumpdev=$_dev - if kdump_is_bond "$_dev"; then - (kdump_setup_bond "$_dev" "$(get_nmcli_connection_apath_by_ifname "$_dev")") || exit 1 - elif kdump_is_team "$_dev"; then - kdump_setup_team "$_dev" - elif kdump_is_vlan "$_dev"; then - kdump_setup_vlan "$_dev" - else - _mac=$(kdump_get_mac_addr "$_dev") - _kdumpdev=$(kdump_setup_ifname "$_dev") - echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/41bridge.conf" - fi - _brif+="$_kdumpdev," - done - echo " bridge=$_netdev:${_brif%,}" >> "${initdir}/etc/cmdline.d/41bridge.conf" -} - -# drauct takes bond=[::[:]] syntax to parse -# bond. For example: -# bond=bond0:eth0,eth1:mode=balance-rr -kdump_setup_bond() { - local _netdev="$1" - local _conpath="$2" - local _dev _mac _slaves _kdumpdev _bondoptions - for _dev in $(cat "/sys/class/net/$_netdev/bonding/slaves"); do - _mac=$(kdump_get_perm_addr "$_dev") - _kdumpdev=$(kdump_setup_ifname "$_dev") - echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/42bond.conf" - _slaves+="$_kdumpdev," - done - echo -n " bond=$_netdev:${_slaves%,}" >> "${initdir}/etc/cmdline.d/42bond.conf" - - _bondoptions=$(get_nmcli_field_by_conpath "bond.options" "$_conpath") - - if [[ -z $_bondoptions ]]; then - dwarning "Failed to get bond configuration via nmlci output. Now try sourcing ifcfg script." - source_ifcfg_file "$_netdev" - _bondoptions="$(echo "$BONDING_OPTS" | xargs echo | tr " " ",")" - fi - - if [[ -z $_bondoptions ]]; then - derror "Get empty bond options" - exit 1 - fi - - echo ":$_bondoptions" >> "${initdir}/etc/cmdline.d/42bond.conf" -} - -kdump_setup_team() { - local _netdev=$1 - local _dev _mac _slaves _kdumpdev - for _dev in $(teamnl "$_netdev" ports | awk -F':' '{print $2}'); do - _mac=$(kdump_get_perm_addr "$_dev") - _kdumpdev=$(kdump_setup_ifname "$_dev") - echo -n " ifname=$_kdumpdev:$_mac" >> "${initdir}/etc/cmdline.d/44team.conf" - _slaves+="$_kdumpdev," - done - echo " team=$_netdev:${_slaves%,}" >> "${initdir}/etc/cmdline.d/44team.conf" - #Buggy version teamdctl outputs to stderr! - #Try to use the latest version of teamd. - if ! teamdctl "$_netdev" config dump > "${initdir}/tmp/$$-$_netdev.conf"; then - derror "teamdctl failed." - exit 1 - fi - inst_dir /etc/teamd - inst_simple "${initdir}/tmp/$$-$_netdev.conf" "/etc/teamd/$_netdev.conf" - rm -f "${initdir}/tmp/$$-$_netdev.conf" -} - -kdump_setup_vlan() { - local _netdev=$1 - local _phydev - local _netmac - local _kdumpdev - - _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")" - _netmac="$(kdump_get_mac_addr "$_phydev")" - - #Just support vlan over bond and team - if kdump_is_bridge "$_phydev"; then - derror "Vlan over bridge is not supported!" - exit 1 - elif kdump_is_bond "$_phydev"; then - (kdump_setup_bond "$_phydev" "$(get_nmcli_connection_apath_by_ifname "$_phydev")") || exit 1 - echo " vlan=$(kdump_setup_ifname "$_netdev"):$_phydev" > "${initdir}/etc/cmdline.d/43vlan.conf" - else - _kdumpdev="$(kdump_setup_ifname "$_phydev")" - echo " vlan=$(kdump_setup_ifname "$_netdev"):$_kdumpdev ifname=$_kdumpdev:$_netmac" > "${initdir}/etc/cmdline.d/43vlan.conf" - fi -} - -# find online znet device -# return ifname (_netdev) -# code reaped from the list_configured function of -# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf -find_online_znet_device() { - local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices" - local NETWORK_DEVICES d ifname ONLINE - - [[ ! -d $CCWGROUPBUS_DEVICEDIR ]] && return - NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR) - for d in $NETWORK_DEVICES; do - [[ ! -f "$d/online" ]] && continue - read -r ONLINE < "$d/online" - if [[ $ONLINE -ne 1 ]]; then - continue - fi - # determine interface name, if there (only for qeth and if - # device is online) - if [[ -f $d/if_name ]]; then - read -r ifname < "$d/if_name" - elif [[ -d $d/net ]]; then - ifname=$(ls "$d/net/") - fi - [[ -n $ifname ]] && break - done - echo -n "$ifname" -} - -# setup s390 znet cmdline -# $1: netdev (ifname) -# $2: nmcli connection path -kdump_setup_znet() { - local _netdev="$1" - local _conpath="$2" - local s390_prefix="802-3-ethernet.s390-" - local _options="" - local NETTYPE - local SUBCHANNELS - - NETTYPE=$(get_nmcli_field_by_conpath "${s390_prefix}nettype" "$_conpath") - SUBCHANNELS=$(get_nmcli_field_by_conpath "${s390_prefix}subchannels" "$_conpath") - _options=$(get_nmcli_field_by_conpath "${s390_prefix}options" "$_conpath") - - if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then - dwarning "Failed to get znet configuration via nmlci output. Now try sourcing ifcfg script." - source_ifcfg_file "$_netdev" - for i in $OPTIONS; do - _options=${_options},$i - done - fi - - if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then - exit 1 - fi - - echo "rd.znet=${NETTYPE},${SUBCHANNELS},${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS}" > "${initdir}/etc/cmdline.d/30znet.conf" -} - -kdump_get_ip_route() { - local _route - if ! _route=$(/sbin/ip -o route get to "$1" 2>&1); then - derror "Bad kdump network destination: $1" - exit 1 - fi - echo "$_route" -} - -kdump_get_ip_route_field() { - echo "$1" | sed -n -e "s/^.*\<$2\>\s\+\(\S\+\).*$/\1/p" -} - -kdump_get_remote_ip() { - local _remote _remote_temp - _remote=$(get_remote_host "$1") - if is_hostname "$_remote"; then - _remote_temp=$(getent ahosts "$_remote" | grep -v : | head -n 1) - if [[ -z $_remote_temp ]]; then - _remote_temp=$(getent ahosts "$_remote" | head -n 1) - fi - _remote=$(echo "$_remote_temp" | awk '{print $1}') - fi - echo "$_remote" -} - -# Setup dracut to bring up network interface that enable -# initramfs accessing giving destination -# $1: destination host -kdump_install_net() { - local _destaddr _srcaddr _route _netdev _conpath kdumpnic - local _static _proto _ip_conf _ip_opts _ifname_opts - local _znet_netdev _znet_conpath - - _destaddr=$(kdump_get_remote_ip "$1") - _route=$(kdump_get_ip_route "$_destaddr") - _srcaddr=$(kdump_get_ip_route_field "$_route" "src") - _netdev=$(kdump_get_ip_route_field "$_route" "dev") - _conpath=$(get_nmcli_connection_apath_by_ifname "$_netdev") - _netmac=$(kdump_get_mac_addr "$_netdev") - kdumpnic=$(kdump_setup_ifname "$_netdev") - - _znet_netdev=$(find_online_znet_device) - if [[ -n $_znet_netdev ]]; then - _znet_conpath=$(get_nmcli_connection_apath_by_ifname "$_znet_netdev") - if ! (kdump_setup_znet "$_znet_netdev" "$_znet_conpath"); then - derror "Failed to set up znet" - exit 1 - fi - fi - - _static=$(kdump_static_ip "$_netdev" "$_srcaddr" "$kdumpnic") - if [[ -n $_static ]]; then - _proto=none - elif is_ipv6_address "$_srcaddr"; then - _proto=auto6 - else - _proto=dhcp - fi - - _ip_conf="${initdir}/etc/cmdline.d/40ip.conf" - _ip_opts=" ip=${_static}$kdumpnic:${_proto}" - - # dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same. - # so we have to avoid adding duplicates - # We should also check /proc/cmdline for existing ip=xx arg. - # For example, iscsi boot will specify ip=xxx arg in cmdline. - if [[ ! -f $_ip_conf ]] || ! grep -q "$_ip_opts" "$_ip_conf" \ - && ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then - echo "$_ip_opts" >> "$_ip_conf" - fi - - if kdump_is_bridge "$_netdev"; then - kdump_setup_bridge "$_netdev" - elif kdump_is_bond "$_netdev"; then - (kdump_setup_bond "$_netdev" "$_conpath") || exit 1 - elif kdump_is_team "$_netdev"; then - kdump_setup_team "$_netdev" - elif kdump_is_vlan "$_netdev"; then - kdump_setup_vlan "$_netdev" - else - _ifname_opts=" ifname=$kdumpnic:$_netmac" - echo "$_ifname_opts" >> "$_ip_conf" - fi - - kdump_setup_dns "$_netdev" "$_conpath" - - if [[ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]]; then - # network-manager module needs this parameter - echo "rd.neednet" >> "${initdir}/etc/cmdline.d/50neednet.conf" - fi - - # Save netdev used for kdump as cmdline - # Whoever calling kdump_install_net() is setting up the default gateway, - # ie. bootdev/kdumpnic. So don't override the setting if calling - # kdump_install_net() for another time. For example, after setting eth0 as - # the default gate way for network dump, eth1 in the fence kdump path will - # call kdump_install_net again and we don't want eth1 to be the default - # gateway. - if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ]] \ - && [[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]]; then - echo "kdumpnic=$kdumpnic" > "${initdir}/etc/cmdline.d/60kdumpnic.conf" - echo "bootdev=$kdumpnic" > "${initdir}/etc/cmdline.d/70bootdev.conf" - fi -} - -# install etc/kdump/pre.d and /etc/kdump/post.d -kdump_install_pre_post_conf() { - if [[ -d /etc/kdump/pre.d ]]; then - for file in /etc/kdump/pre.d/*; do - if [[ -x $file ]]; then - dracut_install "$file" - elif [[ $file != "/etc/kdump/pre.d/*" ]]; then - echo "$file is not executable" - fi - done - fi - - if [[ -d /etc/kdump/post.d ]]; then - for file in /etc/kdump/post.d/*; do - if [[ -x $file ]]; then - dracut_install "$file" - elif [[ $file != "/etc/kdump/post.d/*" ]]; then - echo "$file is not executable" - fi - done - fi -} - -default_dump_target_install_conf() { - local _target _fstype - local _mntpoint _save_path - - is_user_configured_dump_target && return - - _save_path=$(get_bind_mount_source "$(get_save_path)") - _target=$(get_target_from_path "$_save_path") - _mntpoint=$(get_mntpoint_from_target "$_target") - - _fstype=$(get_fs_type_from_target "$_target") - if is_fs_type_nfs "$_fstype"; then - kdump_install_net "$_target" - _fstype="nfs" - else - _target=$(kdump_get_persistent_dev "$_target") - fi - - echo "$_fstype $_target" >> "${initdir}/tmp/$$-kdump.conf" - - # don't touch the path under root mount - if [[ $_mntpoint != "/" ]]; then - _save_path=${_save_path##"$_mntpoint"} - fi - - #erase the old path line, then insert the parsed path - sed -i "/^path/d" "${initdir}/tmp/$$-kdump.conf" - echo "path $_save_path" >> "${initdir}/tmp/$$-kdump.conf" -} - -#install kdump.conf and what user specifies in kdump.conf -kdump_install_conf() { - local _opt _val _pdev - - kdump_read_conf > "${initdir}/tmp/$$-kdump.conf" - - while read -r _opt _val; do - # remove inline comments after the end of a directive. - case "$_opt" in - raw) - _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val") - sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" - ;; - ext[234] | xfs | btrfs | minix) - _pdev=$(kdump_get_persistent_dev "$_val") - sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" - ;; - ssh | nfs) - kdump_install_net "$_val" - ;; - dracut_args) - if [[ $(get_dracut_args_fstype "$_val") == nfs* ]]; then - kdump_install_net "$(get_dracut_args_target "$_val")" - fi - ;; - kdump_pre | kdump_post | extra_bins) - # shellcheck disable=SC2086 - dracut_install $_val - ;; - core_collector) - dracut_install "${_val%%[[:blank:]]*}" - ;; - esac - done <<< "$(kdump_read_conf)" - - kdump_install_pre_post_conf - - default_dump_target_install_conf - - kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf" - inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf" - rm -f "${initdir}/tmp/$$-kdump.conf" -} - -# Default sysctl parameters should suffice for kdump kernel. -# Remove custom configurations sysctl.conf & sysctl.d/* -remove_sysctl_conf() { - - # As custom configurations like vm.min_free_kbytes can lead - # to OOM issues in kdump kernel, avoid them - rm -f "${initdir}/etc/sysctl.conf" - rm -rf "${initdir}/etc/sysctl.d" - rm -rf "${initdir}/run/sysctl.d" - rm -rf "${initdir}/usr/lib/sysctl.d" -} - -kdump_iscsi_get_rec_val() { - - local result - - # The open-iscsi 742 release changed to using flat files in - # /var/lib/iscsi. - - result=$(/sbin/iscsiadm --show -m session -r "$1" | grep "^${2} = ") - result=${result##* = } - echo "$result" -} - -kdump_get_iscsi_initiator() { - local _initiator - local initiator_conf="/etc/iscsi/initiatorname.iscsi" - - [[ -f $initiator_conf ]] || return 1 - - while read -r _initiator; do - [[ -z ${_initiator%%#*} ]] && continue # Skip comment lines - - case $_initiator in - InitiatorName=*) - initiator=${_initiator#InitiatorName=} - echo "rd.iscsi.initiator=${initiator}" - return 0 - ;; - *) ;; - esac - done < ${initiator_conf} - - return 1 -} - -# Figure out iBFT session according to session type -is_ibft() { - [[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" == fw ]] -} - -kdump_setup_iscsi_device() { - local path=$1 - local tgt_name - local tgt_ipaddr - local username - local password - local userpwd_str - local username_in - local password_in - local userpwd_in_str - local netroot_str - local initiator_str - local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf" - local initiator_conf="/etc/iscsi/initiatorname.iscsi" - - dinfo "Found iscsi component $1" - - # Check once before getting explicit values, so we can bail out early, - # e.g. in case of pure-hardware(all-offload) iscsi. - if ! /sbin/iscsiadm -m session -r "$path" &> /dev/null; then - return 1 - fi - - if is_ibft "$path"; then - return - fi - - # Remove software iscsi cmdline generated by 95iscsi, - # and let kdump regenerate here. - rm -f "${initdir}/etc/cmdline.d/95iscsi.conf" - - tgt_name=$(kdump_iscsi_get_rec_val "$path" "node.name") - tgt_ipaddr=$(kdump_iscsi_get_rec_val "$path" "node.conn\[0\].address") - - # get and set username and password details - username=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username") - [[ $username == "" ]] && username="" - password=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password") - [[ $password == "" ]] && password="" - username_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username_in") - [[ -n $username ]] && userpwd_str="$username:$password" - - # get and set incoming username and password details - [[ $username_in == "" ]] && username_in="" - password_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password_in") - [[ $password_in == "" ]] && password_in="" - - [[ -n $username_in ]] && userpwd_in_str=":$username_in:$password_in" - - kdump_install_net "$tgt_ipaddr" - - # prepare netroot= command line - # FIXME: Do we need to parse and set other parameters like protocol, port - # iscsi_iface_name, netdev_name, LUN etc. - - if is_ipv6_address "$tgt_ipaddr"; then - tgt_ipaddr="[$tgt_ipaddr]" - fi - netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name" - - [[ -f $netroot_conf ]] || touch "$netroot_conf" - - # If netroot target does not exist already, append. - if ! grep -q "$netroot_str" "$netroot_conf"; then - echo "$netroot_str" >> "$netroot_conf" - dinfo "Appended $netroot_str to $netroot_conf" - fi - - # Setup initator - if ! initiator_str=$(kdump_get_iscsi_initiator); then - derror "Failed to get initiator name" - return 1 - fi - - # If initiator details do not exist already, append. - if ! grep -q "$initiator_str" "$netroot_conf"; then - echo "$initiator_str" >> "$netroot_conf" - dinfo "Appended $initiator_str to $netroot_conf" - fi -} - -kdump_check_iscsi_targets() { - # If our prerequisites are not met, fail anyways. - type -P iscsistart > /dev/null || return 1 - - kdump_check_setup_iscsi() ( - local _dev - _dev=$1 - - [[ -L /sys/dev/block/$_dev ]] || return - cd "$(readlink -f "/sys/dev/block/$_dev")" || return 1 - until [[ -d sys || -d iscsi_session ]]; do - cd .. - done - [[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD" - ) - - [[ $hostonly ]] || [[ $mount_needs ]] && { - for_each_host_dev_and_slaves_all kdump_check_setup_iscsi - } -} - -# hostname -a is deprecated, do it by ourself -get_alias() { - local ips - local entries - local alias_set - - ips=$(hostname -I) - for ip in $ips; do - # in /etc/hosts, alias can come at the 2nd column - if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then - alias_set="$alias_set $entries" - fi - done - - echo "$alias_set" -} - -is_localhost() { - local hostnames - local shortnames - local aliasname - local nodename=$1 - - hostnames=$(hostname -A) - shortnames=$(hostname -A -s) - aliasname=$(get_alias) - hostnames="$hostnames $shortnames $aliasname" - - for name in ${hostnames}; do - if [[ $name == "$nodename" ]]; then - return 0 - fi - done - return 1 -} - -# retrieves fence_kdump nodes from Pacemaker cluster configuration -get_pcs_fence_kdump_nodes() { - local nodes - - pcs cluster sync > /dev/null 2>&1 && pcs cluster cib-upgrade > /dev/null 2>&1 - # get cluster nodes from cluster cib, get interface and ip address - nodelist=$(pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -) - - # nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"' - # we need to convert each to node1, node2 ... nodeX in each iteration - for node in ${nodelist}; do - # convert $node from 'uname="nodeX"' to 'nodeX' - eval "$node" - nodename="$uname" - # Skip its own node name - if is_localhost "$nodename"; then - continue - fi - nodes="$nodes $nodename" - done - - echo "$nodes" -} - -# retrieves fence_kdump args from config file -get_pcs_fence_kdump_args() { - if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then - . "$FENCE_KDUMP_CONFIG_FILE" - echo "$FENCE_KDUMP_OPTS" - fi -} - -get_generic_fence_kdump_nodes() { - local filtered - local nodes - - nodes=$(kdump_get_conf_val "fence_kdump_nodes") - for node in ${nodes}; do - # Skip its own node name - if is_localhost "$node"; then - continue - fi - filtered="$filtered $node" - done - echo "$filtered" -} - -# setup fence_kdump in cluster -# setup proper network and install needed files -kdump_configure_fence_kdump() { - local kdump_cfg_file=$1 - local nodes - local args - - if is_generic_fence_kdump; then - nodes=$(get_generic_fence_kdump_nodes) - - elif is_pcs_fence_kdump; then - nodes=$(get_pcs_fence_kdump_nodes) - - # set appropriate options in kdump.conf - echo "fence_kdump_nodes $nodes" >> "${kdump_cfg_file}" - - args=$(get_pcs_fence_kdump_args) - if [[ -n $args ]]; then - echo "fence_kdump_args $args" >> "${kdump_cfg_file}" - fi - - else - # fence_kdump not configured - return 1 - fi - - # setup network for each node - for node in ${nodes}; do - kdump_install_net "$node" - done - - dracut_install /etc/hosts - dracut_install /etc/nsswitch.conf - dracut_install "$FENCE_KDUMP_SEND" -} - -# Install a random seed used to feed /dev/urandom -# By the time kdump service starts, /dev/uramdom is already fed by systemd -kdump_install_random_seed() { - local poolsize - - poolsize=$(< /proc/sys/kernel/random/poolsize) - - if [[ ! -d "${initdir}/var/lib/" ]]; then - mkdir -p "${initdir}/var/lib/" - fi - - dd if=/dev/urandom of="${initdir}/var/lib/random-seed" \ - bs="$poolsize" count=1 2> /dev/null -} - -kdump_install_systemd_conf() { - # Kdump turns out to require longer default systemd mount timeout - # than 1st kernel(90s by default), we use default 300s for kdump. - if ! grep -q -r "^[[:space:]]*DefaultTimeoutStartSec=" "${initdir}/etc/systemd/system.conf"*; then - mkdir -p "${initdir}/etc/systemd/system.conf.d" - echo "[Manager]" > "${initdir}/etc/systemd/system.conf.d/kdump.conf" - echo "DefaultTimeoutStartSec=300s" >> "${initdir}/etc/systemd/system.conf.d/kdump.conf" - fi - - # Forward logs to console directly, and don't read Kmsg, this avoids - # unneccessary memory consumption and make console output more useful. - # Only do so for non fadump image. - mkdir -p "${initdir}/etc/systemd/journald.conf.d" - echo "[Journal]" > "${initdir}/etc/systemd/journald.conf.d/kdump.conf" - echo "Storage=volatile" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf" - echo "ReadKMsg=no" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf" - echo "ForwardToConsole=yes" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf" -} - -remove_cpu_online_rule() { - local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules - - if [[ -f $file ]]; then - sed -i '/SUBSYSTEM=="cpu"/d' "$file" - fi -} - -install() { - local arch - - kdump_module_init - kdump_install_conf - remove_sysctl_conf - - # Onlining secondary cpus breaks kdump completely on KVM on Power hosts - # Though we use maxcpus=1 by default but 40-redhat.rules will bring up all - # possible cpus by default. (rhbz1270174 rhbz1266322) - # Thus before we get the kernel fix and the systemd rule fix let's remove - # the cpu online rule in kdump initramfs. - arch=$(uname -m) - if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then - remove_cpu_online_rule - fi - - if is_ssh_dump_target; then - kdump_install_random_seed - fi - dracut_install -o /etc/adjtime /etc/localtime - inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress" - chmod +x "${initdir}/kdumpscripts/monitor_dd_progress" - inst "/bin/dd" "/bin/dd" - inst "/bin/tail" "/bin/tail" - inst "/bin/date" "/bin/date" - inst "/bin/sync" "/bin/sync" - inst "/bin/cut" "/bin/cut" - inst "/bin/head" "/bin/head" - inst "/bin/awk" "/bin/awk" - inst "/bin/sed" "/bin/sed" - inst "/bin/stat" "/bin/stat" - inst "/sbin/makedumpfile" "/sbin/makedumpfile" - inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg" - inst "/usr/bin/printf" "/sbin/printf" - inst "/usr/bin/logger" "/sbin/logger" - inst "/usr/bin/chmod" "/sbin/chmod" - inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh" - inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh" - inst "$moddir/kdump.sh" "/usr/bin/kdump.sh" - inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service" - systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service - # Replace existing emergency service and emergency target - cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service" - cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target" - # Also redirect dracut-emergency to kdump error handler - ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service" - - # Check for all the devices and if any device is iscsi, bring up iscsi - # target. Ideally all this should be pushed into dracut iscsi module - # at some point of time. - kdump_check_iscsi_targets - - kdump_install_systemd_conf - - # nfs/ssh dump will need to get host ip in second kernel and need to call 'ip' tool, see get_host_ip for more detail - if is_nfs_dump_target || is_ssh_dump_target; then - inst "ip" - fi - - # For the lvm type target under kdump, in /etc/lvm/lvm.conf we can - # safely replace "reserved_memory=XXXX"(default value is 8192) with - # "reserved_memory=1024" to lower memory pressure under kdump. We do - # it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it - # actually does nothing. - sed -i -e \ - 's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \ - "${initdir}/etc/lvm/lvm.conf" &> /dev/null - - # Save more memory by dropping switch root capability - dracut_no_switch_root -} diff --git a/dracut-monitor_dd_progress b/dracut-monitor_dd_progress deleted file mode 100644 index e139d33..0000000 --- a/dracut-monitor_dd_progress +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh - -SRC_FILE_MB=$1 - -while true -do - DD_PID=`pidof dd` - if [ -n "$DD_PID" ]; then - break - fi -done - -while true -do - sleep 5 - if [ ! -d /proc/$DD_PID ]; then - break - fi - - kill -s USR1 $DD_PID - CURRENT_SIZE=`tail -n 1 /tmp/dd_progress_file | sed "s/[^0-9].*//g"` - [ -n "$CURRENT_SIZE" ] && { - CURRENT_MB=$(($CURRENT_SIZE / 1048576)) - echo -e "Copied $CURRENT_MB MB / $SRC_FILE_MB MB\r" - } -done - -rm -f /tmp/dd_progress_file diff --git a/early-kdump-howto.txt b/early-kdump-howto.txt deleted file mode 100644 index 68b23c7..0000000 --- a/early-kdump-howto.txt +++ /dev/null @@ -1,95 +0,0 @@ -Early Kdump HOWTO - -Introduction ------------- - -Early kdump is a mechanism to make kdump operational earlier than normal kdump -service. The kdump service starts early enough for general crash cases, but -there are some cases where it has no chance to make kdump operational in boot -sequence, such as detecting devices and starting early services. If you hit -such a case, early kdump may allow you to get more information of it. - -Early kdump is implemented as a dracut module. It adds a kernel (vmlinuz) and -initramfs for kdump to your system's initramfs in order to load them as early -as possible. After that, if you provide "rd.earlykdump" in kernel command line, -then in the initramfs, early kdump will load those files like the normal kdump -service. This is disabled by default. - -For the normal kdump service, it can check whether the early kdump has loaded -the crash kernel and initramfs. It has no conflict with the early kdump. - -How to configure early kdump ----------------------------- - -We assume if you're reading this document, you should already have kexec-tools -installed. - -You can rebuild the initramfs with earlykdump support with below steps: - -1. start kdump service to make sure kdump initramfs is created. - - # systemctl start kdump - - NOTE: If a crash occurs during boot process, early kdump captures a vmcore - and reboot the system by default, so the system might go into crash loop. - You can avoid such a crash loop by adding the following settings, which - power off the system after dump capturing, to kdump.conf in advance: - - final_action poweroff - failure_action poweroff - - For the failure_action, you can choose anything other than "reboot". - -2. rebuild system initramfs with earlykdump support. - - # dracut --force --add earlykdump - - NOTE: Recommend to backup the original system initramfs before performing - this step to put it back if something happens during boot-up. - -3. add rd.earlykdump in grub kernel command line. - -After making said changes, reboot your system to take effect. Of course, if you -want to disable early kdump, you can simply remove "rd.earlykdump" from kernel -boot parameters in grub, and reboot system like above. - -Once the boot is completed, you can check the status of the early kdump support -on the command prompt: - - # journalctl -b | grep early-kdump - -Then, you will see some useful logs, for example: - -- if early kdump is successful. - -Mar 09 09:57:56 localhost dracut-cmdline[190]: early-kdump is enabled. -Mar 09 09:57:56 localhost dracut-cmdline[190]: kexec: loaded early-kdump kernel - -- if early kdump is disabled. - -Mar 09 10:02:47 localhost dracut-cmdline[189]: early-kdump is disabled. - -Notes ------ - -- The size of early kdump initramfs will be large because it includes vmlinuz - and kdump initramfs. - -- Early kdump inherits the settings of normal kdump, so any changes that - caused normal kdump rebuilding also require rebuilding the system initramfs - to make sure that the changes take effect for early kdump. Therefore, after - the rebuilding of kdump initramfs is completed, provide a prompt message to - tell the fact. - -- If you install an updated kernel and reboot the system with it, the early - kdump will be disabled by default. To enable it with the new kernel, you - need to take the above steps again. - -Limitation ----------- - -- At present, early kdump doesn't support fadump. - -- Early kdump loads a crash kernel and initramfs at the beginning of the - process in system's initramfs, so a crash at earlier than that (e.g. in - kernel initialization) cannot be captured even with the early kdump. diff --git a/fadump-howto.txt b/fadump-howto.txt deleted file mode 100644 index 9773f78..0000000 --- a/fadump-howto.txt +++ /dev/null @@ -1,359 +0,0 @@ -Firmware assisted dump (fadump) HOWTO - -Introduction - -Firmware assisted dump is a new feature in the 3.4 mainline kernel supported -only on powerpc architecture. The goal of firmware-assisted dump is to enable -the dump of a crashed system, and to do so from a fully-reset system, and to -minimize the total elapsed time until the system is back in production use. A -complete documentation on implementation can be found at -Documentation/powerpc/firmware-assisted-dump.txt in upstream linux kernel tree -from 3.4 version and above. - -Please note that the firmware-assisted dump feature is only available on Power6 -and above systems with recent firmware versions. - -Overview - -Fadump - -Fadump is a robust kernel crash dumping mechanism to get reliable kernel crash -dump with assistance from firmware. This approach does not use kexec, instead -firmware assists in booting the kdump kernel while preserving memory contents. -Unlike kdump, the system is fully reset, and loaded with a fresh copy of the -kernel. In particular, PCI and I/O devices are reinitialized and are in a -clean, consistent state. This second kernel, often called a capture kernel, -boots with very little memory and captures the dump image. - -The first kernel registers the sections of memory with the Power firmware for -dump preservation during OS initialization. These registered sections of memory -are reserved by the first kernel during early boot. When a system crashes, the -Power firmware fully resets the system, preserves all the system memory -contents, save the low memory (boot memory of size larger of 5% of system -RAM or 256MB) of RAM to the previous registered region. It will also save -system registers, and hardware PTE's. - -Fadump is supported only on ppc64 platform. The standard kernel and capture -kernel are one and the same on ppc64. - -If you're reading this document, you should already have kexec-tools -installed. If not, you install it via the following command: - - # dnf install kexec-tools - -Fadump Operational Flow: - -Like kdump, fadump also exports the ELF formatted kernel crash dump through -/proc/vmcore. Hence existing kdump infrastructure can be used to capture fadump -vmcore. The idea is to keep the functionality transparent to end user. From -user perspective there is no change in the way kdump init script works. - -However, unlike kdump, fadump does not pre-load kdump kernel and initrd into -reserved memory, instead it always uses default OS initrd during second boot -after crash. Hence, for fadump, we rebuild the new kdump initrd and replace it -with default initrd. Before replacing existing default initrd we take a backup -of original default initrd for user's reference. The dracut package has been -enhanced to rebuild the default initrd with vmcore capture steps. The initrd -image is rebuilt as per the configuration in /etc/kdump.conf file. - -The control flow of fadump works as follows: -01. System panics. -02. At the crash, kernel informs power firmware that kernel has crashed. -03. Firmware takes the control and reboots the entire system preserving - only the memory (resets all other devices). -04. The reboot follows the normal booting process (non-kexec). -05. The boot loader loads the default kernel and initrd from /boot -06. The default initrd loads and runs /init -07. dracut-kdump.sh script present in fadump aware default initrd checks if - '/proc/device-tree/rtas/ibm,kernel-dump' file exists before executing - steps to capture vmcore. - (This check will help to bypass the vmcore capture steps during normal boot - process.) -09. Captures dump according to /etc/kdump.conf -10. Is dump capture successful (yes goto 12, no goto 11) -11. Perform the failure action specified in /etc/kdump.conf - (The default failure action is reboot, if unspecified) -12. Perform the final action specified in /etc/kdump.conf - (The default final action is reboot, if unspecified) - - -How to configure fadump: - -Again, we assume if you're reading this document, you should already have -kexec-tools installed. If not, you install it via the following command: - - # dnf install kexec-tools - -Make the kernel to be configured with FADump as the default boot entry, if -it isn't already: - - # grubby --set-default=/boot/vmlinuz- - -Boot into the kernel to be configured for FADump. To be able to do much of -anything interesting in the way of debug analysis, you'll also need to install -the kernel-debuginfo package, of the same arch as your running kernel, and the -crash utility: - - # dnf --enablerepo=\*debuginfo install kernel-debuginfo.$(uname -m) crash - -Next up, we can enable firmware assisted dump and reserve the memory for boot -memory preservation as specified in in the table of 'FADump Memory Requirements' -section: - - # kdumpctl reset-crashkernel --fadump=on - -Alternatively, you can use grubby to reserve custom amount of memory: - - # grubby --args="fadump=on crashkernel=6G" --update-kernel=/boot/vmlinuz-`uname -r` - -By default, FADump reserved memory will be initialized as CMA area to make the -memory available through CMA allocator on the production kernel. We can opt out -of this, making reserved memory unavailable to production kernel, by booting the -linux kernel with 'fadump=nocma' instead of 'fadump=on': - - # kdumpctl reset-crashkernel --fadump=nocma - -The term 'boot memory' means size of the low memory chunk that is required for -a kernel to boot successfully when booted with restricted memory. By default, -the boot memory size will be the larger of 5% of system RAM or 256MB. -Alternatively, user can also specify boot memory size through boot parameter -'fadump_reserve_mem=' which will override the default calculated size. Use this -option if default boot memory size is not sufficient for second kernel to boot -successfully. - -After making said changes, reboot your system, so that the specified memory is -reserved and left untouched by the normal system. Take note that the output of -'free -m' will show X MB less memory than without this parameter, which is -expected. If you see OOM (Out Of Memory) error messages while loading capture -kernel, then you should bump up the memory reservation size. - -Now that you've got that reserved memory region set up, you want to turn on -the kdump init script: - - # systemctl enable kdump.service - -Then, start up kdump as well: - - # systemctl start kdump.service - -This should turn on the firmware assisted functionality in kernel by -echo'ing 1 to /sys/kernel/fadump_registered, leaving the system ready -to capture a vmcore upon crashing. For journaling filesystems like XFS an -additional step is required to ensure bootloader does not pick the -older initrd (without vmcore capture scripts): - - * If /boot is a separate partition, run the below commands as the root user, - or as a user with CAP_SYS_ADMIN rights: - - # fsfreeze -f - # fsfreeze -u - - * If /boot is not a separate partition, reboot the system. - -After reboot check if the kdump service is up and running with: - - # systemctl status kdump.service - -To test out whether FADump is configured properly, you can force-crash your -system by echo'ing a 'c' into /proc/sysrq-trigger: - - # echo c > /proc/sysrq-trigger - -You should see some panic output, followed by the system reset and booting into -fresh copy of kernel. When default initrd loads and runs /init, vmcore should -be copied out to disk (by default, in /var/crash//vmcore), -then the system rebooted back into your normal kernel. - -Once back to your normal kernel, you can use the previously installed crash -kernel in conjunction with the previously installed kernel-debuginfo to -perform postmortem analysis: - - # crash /usr/lib/debug/lib/modules/2.6.17-1.2621.el5/vmlinux - /var/crash/2006-08-23-15:34/vmcore - - crash> bt - -and so on... - -Saving vmcore-dmesg.txt ------------------------ -Kernel log bufferes are one of the most important information available -in vmcore. Now before saving vmcore, kernel log bufferes are extracted -from /proc/vmcore and saved into a file vmcore-dmesg.txt. After -vmcore-dmesg.txt, vmcore is saved. Destination disk and directory for -vmcore-dmesg.txt is same as vmcore. Note that kernel log buffers will -not be available if dump target is raw device. - -FADump Memory Requirements: - - System Memory Recommended memory ---------------------- ---------------------- - 4 GB - 16 GB : 768 MB - 16 GB - 64 GB : 1024 MB - 64 GB - 128 GB : 2 GB - 128 GB - 1 TB : 4 GB - 1 TB - 2 TB : 6 GB - 2 TB - 4 TB : 12 GB - 4 TB - 8 TB : 20 GB - 8 TB - 16 TB : 36 GB - 16 TB - 32 TB : 64 GB - 32 TB - 64 TB : 128 GB - 64 TB & above : 180 GB - -Things to remember: - -1) The memory required to boot capture Kernel is a moving target that depends - on many factors like hardware attached to the system, kernel and modules in - use, packages installed and services enabled, there is no one-size-fits-all. - But the above recommendations are based on system memory. So, the above - recommendations for FADump come with a few assumptions, based on available - system memory, about the resources the system could have. So, please take - the recommendations with a pinch of salt and remember to try capturing dump - a few times to confirm that the system is configured successfully with dump - capturing support. - -2) Though the memory requirements for FADump seem high, this memory is not - completely set aside but made available for userspace applications to use, - through the CMA allocator. - -3) As the same initrd is used for booting production kernel as well as capture - kernel and with dump being captured in a restricted memory environment, few - optimizations (like not inclding network dracut module, disabling multipath - and such) are applied while building the initrd. In case, the production - environment needs these optimizations to be avoided, dracut_args option in - /etc/kdump.conf file could be leveraged. For example, if a user wishes for - network module to be included in the initrd, adding the below entry in - /etc/kdump.conf file and restarting kdump service would take care of it. - - dracut_args --add "network" - -4) If FADump is configured to capture vmcore to a remote dump target using SSH - or NFS protocol, the corresponding network interface '' is - renamed to 'kdump-', if it is generic (like *eth# or net#). - It happens because vmcore capture scripts in the initial RAM disk (initrd) - add the 'kdump-' prefix to the network interface name to secure persistent - naming. And as capture kernel and production kernel use the same initrd in - case of FADump, the interface name is changed for the production kernel too. - This is likely to impact network configuration setup for production kernel. - So, it is recommended to use a non-generic name for a network interface, - before setting up FADump to capture vmcore to a remote dump target based on - that network interface, to avoid running into network configuration issues. - -Dump Triggering methods: - -This section talks about the various ways, other than a Kernel Panic, in which -fadump can be triggered. The following methods assume that fadump is configured -on your system, with the scripts enabled as described in the section above. - -1) AltSysRq C - -FAdump can be triggered with the combination of the 'Alt','SysRq' and 'C' -keyboard keys. Please refer to the following link for more details: - -https://fedoraproject.org/wiki/QA/Sysrq - -In addition, on PowerPC boxes, fadump can also be triggered via Hardware -Management Console(HMC) using 'Ctrl', 'O' and 'C' keyboard keys. - -2) Kernel OOPs - -If we want to generate a dump everytime the Kernel OOPses, we can achieve this -by setting the 'Panic On OOPs' option as follows: - - # echo 1 > /proc/sys/kernel/panic_on_oops - -3) PowerPC specific methods: - -On IBM PowerPC machines, issuing a soft reset invokes the XMON debugger(if -XMON is configured). To configure XMON one needs to compile the kernel with -the CONFIG_XMON and CONFIG_XMON_DEFAULT options, or by compiling with -CONFIG_XMON and booting the kernel with xmon=on option. - -Following are the ways to remotely issue a soft reset on PowerPC boxes, which -would drop you to XMON. Pressing a 'X' (capital alphabet X) followed by an -'Enter' here will trigger the dump. - -3.1) HMC - -Hardware Management Console(HMC) available on Power4 and Power5 machines allow -partitions to be reset remotely. This is specially useful in hang situations -where the system is not accepting any keyboard inputs. - -Once you have HMC configured, the following steps will enable you to trigger -fadump via a soft reset: - -On Power4 - Using GUI - - * In the right pane, right click on the partition you wish to dump. - * Select "Operating System->Reset". - * Select "Soft Reset". - * Select "Yes". - - Using HMC Commandline - - # reset_partition -m -p -t soft - -On Power5 - Using GUI - - * In the right pane, right click on the partition you wish to dump. - * Select "Restart Partition". - * Select "Dump". - * Select "OK". - - Using HMC Commandline - - # chsysstate -m -n -o dumprestart -r lpar - -3.2) Blade Management Console for Blade Center - -To initiate a dump operation, go to Power/Restart option under "Blade Tasks" in -the Blade Management Console. Select the corresponding blade for which you want -to initate the dump and then click "Restart blade with NMI". This issues a -system reset and invokes xmon debugger. - - -Advanced Setups & Failure action: - -Kdump and fadump exhibit similar behavior in terms of setup & failure action. -For fadump advanced setup related information see section "Advanced Setups" in -"kexec-kdump-howto.txt" document. Refer to "Failure action" section in "kexec- -kdump-howto.txt" document for fadump failure action related information. - -Compression and filtering - -Refer "Compression and filtering" section in "kexec-kdump-howto.txt" document. -Compression and filtering are same for kdump & fadump. - - -Notes on rootfs mount: -Dracut is designed to mount rootfs by default. If rootfs mounting fails it -will refuse to go on. So fadump leaves rootfs mounting to dracut currently. -We make the assumtion that proper root= cmdline is being passed to dracut -initramfs for the time being. If you need modify "KDUMP_COMMANDLINE=" in -/etc/sysconfig/kdump, you will need to make sure that appropriate root= -options are copied from /proc/cmdline. In general it is best to append -command line options using "KDUMP_COMMANDLINE_APPEND=" instead of replacing -the original command line completely. - -How to disable FADump: - -Remove "fadump=on"/"fadump=nocma" from kernel cmdline parameters OR replace -it with "fadump=off" kernel cmdline parameter: - - # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="fadump=on" -or - # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="fadump=nocma" -OR - # grubby --update-kernel=/boot/vmlinuz-`uname -r` --args="fadump=off" - -Remove "crashkernel=" from kernel cmdline parameters: - - # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="crashkernel" - -If KDump is to be used as the dump capturing mechanism, reset the crashkernel parameter: - - # kdumpctl reset-crashkernel --fadump=off - -Reboot the system for the settings to take effect. diff --git a/kdump-dep-generator.sh b/kdump-dep-generator.sh deleted file mode 100644 index f48c8f6..0000000 --- a/kdump-dep-generator.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh - -# More details about systemd generator: -# http://www.freedesktop.org/wiki/Software/systemd/Generators/ - -. /usr/lib/kdump/kdump-lib.sh -. /usr/lib/kdump/kdump-logger.sh - -# If invokded with no arguments for testing purpose, output to /tmp to -# avoid overriding the existing. -dest_dir="/tmp" - -if [ -n "$1" ]; then - dest_dir=$1 -fi - -systemd_dir=/usr/lib/systemd/system -kdump_wants=$dest_dir/kdump.service.wants - -if is_ssh_dump_target; then - mkdir -p $kdump_wants - ln -sf $systemd_dir/network-online.target $kdump_wants/ -fi diff --git a/kdump-in-cluster-environment.txt b/kdump-in-cluster-environment.txt deleted file mode 100644 index de1eb5e..0000000 --- a/kdump-in-cluster-environment.txt +++ /dev/null @@ -1,91 +0,0 @@ -Kdump-in-cluster-environment HOWTO - -Introduction - -Kdump is a kexec based crash dumping mechansim for Linux. This docuement -illustrate how to configure kdump in cluster environment to allow the kdump -crash recovery service complete without being preempted by traditional power -fencing methods. - -Overview - -Kexec/Kdump - -Details about Kexec/Kdump are available in Kexec-Kdump-howto file and will not -be described here. - -fence_kdump - -fence_kdump is an I/O fencing agent to be used with the kdump crash recovery -service. When the fence_kdump agent is invoked, it will listen for a message -from the failed node that acknowledges that the failed node is executing the -kdump crash kernel. Note that fence_kdump is not a replacement for traditional -fencing methods. The fence_kdump agent can only detect that a node has entered -the kdump crash recovery service. This allows the kdump crash recovery service -complete without being preempted by traditional power fencing methods. - -fence_kdump_send - -fence_kdump_send is a utility used to send messages that acknowledge that the -node itself has entered the kdump crash recovery service. The fence_kdump_send -utility is typically run in the kdump kernel after a cluster node has -encountered a kernel panic. Once the cluster node has entered the kdump crash -recovery service, fence_kdump_send will periodically send messages to all -cluster nodes. When the fence_kdump agent receives a valid message from the -failed nodes, fencing is complete. - -How to configure Pacemaker cluster environment: - -If we want to use kdump in Pacemaker cluster environment, fence-agents-kdump -should be installed in every nodes in the cluster. You can achieve this via -the following command: - - # yum install -y fence-agents-kdump - -Next is to add kdump_fence to the cluster. Assuming that the cluster consists -of three nodes, they are node1, node2 and node3, and use Pacemaker to perform -resource management and pcs as cli configuration tool. - -With pcs it is easy to add a stonith resource to the cluster. For example, add -a stonith resource named mykdumpfence with fence type of fence_kdump via the -following commands: - - # pcs stonith create mykdumpfence fence_kdump \ - pcmk_host_check=static-list pcmk_host_list="node1 node2 node3" - # pcs stonith update mykdumpfence pcmk_monitor_action=metadata --force - # pcs stonith update mykdumpfence pcmk_status_action=metadata --force - # pcs stonith update mykdumpfence pcmk_reboot_action=off --force - -Then enable stonith - # pcs property set stonith-enabled=true - -How to configure kdump: - -Actually there are two ways how to configure fence_kdump support: - -1) Pacemaker based clusters - If you have successfully configured fence_kdump in Pacemaker, there is - no need to add some special configuration in kdump. So please refer to - Kexec-Kdump-howto file for more information. - -2) Generic clusters - For other types of clusters there are two configuration options in - kdump.conf which enables fence_kdump support: - - fence_kdump_nodes - Contains list of cluster node(s) separated by space to send - fence_kdump notification to (this option is mandatory to enable - fence_kdump) - - fence_kdump_args - Command line arguments for fence_kdump_send (it can contain - all valid arguments except hosts to send notification to) - - These options will most probably be configured by your cluster software, - so please refer to your cluster documentation how to enable fence_kdump - support. - -Please be aware that these two ways cannot be combined and 2) has precedence -over 1). It means that if fence_kdump is configured using fence_kdump_nodes -and fence_kdump_args options in kdump.conf, Pacemaker configuration is not -used even if it exists. diff --git a/kdump-lib-initramfs.sh b/kdump-lib-initramfs.sh deleted file mode 100755 index 84e6bf7..0000000 --- a/kdump-lib-initramfs.sh +++ /dev/null @@ -1,133 +0,0 @@ -#!/bin/sh -# -# The code in this file will be used in initramfs environment, bash may -# not be the default shell. Any code added must be POSIX compliant. - -DEFAULT_PATH="/var/crash/" -DEFAULT_SSHKEY="/root/.ssh/kdump_id_rsa" -KDUMP_CONFIG_FILE="/etc/kdump.conf" -FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump" -FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send" - -# Read kdump config in well formated style -kdump_read_conf() -{ - # Following steps are applied in order: strip trailing comment, strip trailing space, - # strip heading space, match non-empty line, remove duplicated spaces between conf name and value - [ -f "$KDUMP_CONFIG_FILE" ] && sed -n -e "s/#.*//;s/\s*$//;s/^\s*//;s/\(\S\+\)\s*\(.*\)/\1 \2/p" $KDUMP_CONFIG_FILE -} - -# Retrieves config value defined in kdump.conf -# $1: config name, sed regexp compatible -kdump_get_conf_val() -{ - # For lines matching "^\s*$1\s+", remove matched part (config name including space), - # remove tailing comment, space, then store in hold space. Print out the hold buffer on last line. - [ -f "$KDUMP_CONFIG_FILE" ] && - sed -n -e "/^\s*\($1\)\s\+/{s/^\s*\($1\)\s\+//;s/#.*//;s/\s*$//;h};\${x;p}" $KDUMP_CONFIG_FILE -} - -is_mounted() -{ - findmnt -k -n "$1" > /dev/null 2>&1 -} - -# $1: info type -# $2: mount source type -# $3: mount source -# $4: extra args -get_mount_info() -{ - __kdump_mnt=$(findmnt -k -n -r -o "$1" "--$2" "$3" $4) - - [ -z "$__kdump_mnt" ] && [ -e "/etc/fstab" ] && __kdump_mnt=$(findmnt -s -n -r -o "$1" "--$2" "$3" $4) - - echo "$__kdump_mnt" -} - -is_ipv6_address() -{ - echo "$1" | grep -q ":" -} - -is_fs_type_nfs() -{ - [ "$1" = "nfs" ] || [ "$1" = "nfs4" ] -} - -# If $1 contains dracut_args "--mount", return -get_dracut_args_fstype() -{ - echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f3 -} - -# If $1 contains dracut_args "--mount", return -get_dracut_args_target() -{ - echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1 -} - -get_save_path() -{ - __kdump_path=$(kdump_get_conf_val path) - [ -z "$__kdump_path" ] && __kdump_path=$DEFAULT_PATH - - # strip the duplicated "/" - echo "$__kdump_path" | tr -s / -} - -get_root_fs_device() -{ - findmnt -k -f -n -o SOURCE / -} - -# Return the current underlying device of a path, ignore bind mounts -get_target_from_path() -{ - __kdump_target=$(df "$1" 2> /dev/null | tail -1 | awk '{print $1}') - [ "$__kdump_target" = "/dev/root" ] && [ ! -e /dev/root ] && __kdump_target=$(get_root_fs_device) - echo "$__kdump_target" -} - -get_fs_type_from_target() -{ - get_mount_info FSTYPE source "$1" -f -} - -get_mntpoint_from_target() -{ - # --source is applied to ensure non-bind mount is returned - get_mount_info TARGET source "$1" -f -} - -is_ssh_dump_target() -{ - kdump_get_conf_val ssh | grep -q @ -} - -is_raw_dump_target() -{ - [ -n "$(kdump_get_conf_val raw)" ] -} - -is_nfs_dump_target() -{ - if [ -n "$(kdump_get_conf_val nfs)" ]; then - return 0 - fi - - if is_fs_type_nfs "$(get_dracut_args_fstype "$(kdump_get_conf_val dracut_args)")"; then - return 0 - fi - - if is_fs_type_nfs "$(get_fs_type_from_target "$(get_target_from_path "$(get_save_path)")")"; then - return 0 - fi - - return 1 -} - -is_fs_dump_target() -{ - [ -n "$(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix")" ] -} diff --git a/kdump-lib.sh b/kdump-lib.sh deleted file mode 100755 index f7b659e..0000000 --- a/kdump-lib.sh +++ /dev/null @@ -1,1032 +0,0 @@ -#!/bin/bash -# -# Kdump common variables and functions -# -if [[ ${__SOURCED__:+x} ]]; then - . ./kdump-lib-initramfs.sh -else - . /lib/kdump/kdump-lib-initramfs.sh -fi - -FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled" - -is_fadump_capable() -{ - # Check if firmware-assisted dump is enabled - # if no, fallback to kdump check - if [[ -f $FADUMP_ENABLED_SYS_NODE ]]; then - rc=$(< $FADUMP_ENABLED_SYS_NODE) - [[ $rc -eq 1 ]] && return 0 - fi - return 1 -} - -is_squash_available() -{ - for kmodule in squashfs overlay loop; do - if [[ -z $KDUMP_KERNELVER ]]; then - modprobe --dry-run $kmodule &> /dev/null || return 1 - else - modprobe -S "$KDUMP_KERNELVER" --dry-run $kmodule &> /dev/null || return 1 - fi - done -} - -is_zstd_command_available() -{ - [[ -x "$(command -v zstd)" ]] -} - -perror_exit() -{ - derror "$@" - exit 1 -} - -# Check if fence kdump is configured in Pacemaker cluster -is_pcs_fence_kdump() -{ - # no pcs or fence_kdump_send executables installed? - type -P pcs > /dev/null || return 1 - [[ -x $FENCE_KDUMP_SEND ]] || return 1 - - # fence kdump not configured? - (pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1 -} - -# Check if fence_kdump is configured using kdump options -is_generic_fence_kdump() -{ - [[ -x $FENCE_KDUMP_SEND ]] || return 1 - - [[ $(kdump_get_conf_val fence_kdump_nodes) ]] -} - -to_dev_name() -{ - local dev="${1//\"/}" - - case "$dev" in - UUID=*) - blkid -U "${dev#UUID=}" - ;; - LABEL=*) - blkid -L "${dev#LABEL=}" - ;; - *) - echo "$dev" - ;; - esac -} - -is_user_configured_dump_target() -{ - [[ $(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw\|nfs\|ssh") ]] || is_mount_in_dracut_args -} - -get_user_configured_dump_disk() -{ - local _target - - _target=$(kdump_get_conf_val "ext[234]\|xfs\|btrfs\|minix\|raw") - [[ -n $_target ]] && echo "$_target" && return - - _target=$(get_dracut_args_target "$(kdump_get_conf_val "dracut_args")") - [[ -b $_target ]] && echo "$_target" -} - -get_block_dump_target() -{ - local _target _path - - if is_ssh_dump_target || is_nfs_dump_target; then - return - fi - - _target=$(get_user_configured_dump_disk) - [[ -n $_target ]] && to_dev_name "$_target" && return - - # Get block device name from local save path - _path=$(get_save_path) - _target=$(get_target_from_path "$_path") - [[ -b $_target ]] && to_dev_name "$_target" -} - -is_dump_to_rootfs() -{ - [[ $(kdump_get_conf_val 'failure_action\|default') == dump_to_rootfs ]] -} - -get_failure_action_target() -{ - local _target - - if is_dump_to_rootfs; then - # Get rootfs device name - _target=$(get_root_fs_device) - [[ -b $_target ]] && to_dev_name "$_target" && return - # Then, must be nfs root - echo "nfs" - fi -} - -# Get kdump targets(including root in case of dump_to_rootfs). -get_kdump_targets() -{ - local _target _root - local kdump_targets - - _target=$(get_block_dump_target) - if [[ -n $_target ]]; then - kdump_targets=$_target - elif is_ssh_dump_target; then - kdump_targets="ssh" - else - kdump_targets="nfs" - fi - - # Add the root device if dump_to_rootfs is specified. - _root=$(get_failure_action_target) - if [[ -n $_root ]] && [[ $kdump_targets != "$_root" ]]; then - kdump_targets="$kdump_targets $_root" - fi - - echo "$kdump_targets" -} - -# Return the bind mount source path, return the path itself if it's not bind mounted -# Eg. if /path/to/src is bind mounted to /mnt/bind, then: -# /mnt/bind -> /path/to/src, /mnt/bind/dump -> /path/to/src/dump -# -# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir] -# in the SOURCE column for bind-mounts, then if $_src equals to -# $_src_nofsroot, the mountpoint is not bind mounted directory. -# -# Below is just an example for mount info -# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the -# directory is bind mounted. The former part represents the device path, rest -# part is the bind mounted directory which quotes by bracket "[]". -get_bind_mount_source() -{ - local _mnt _path _src _opt _fstype - local _fsroot _src_nofsroot - - _mnt=$(df "$1" | tail -1 | awk '{print $NF}') - _path=${1#$_mnt} - - _src=$(get_mount_info SOURCE target "$_mnt" -f) - _opt=$(get_mount_info OPTIONS target "$_mnt" -f) - _fstype=$(get_mount_info FSTYPE target "$_mnt" -f) - - # bind mount in fstab - if [[ -d $_src ]] && [[ $_fstype == none ]] && (echo "$_opt" | grep -q "\bbind\b"); then - echo "$_src$_path" && return - fi - - # direct mount - _src_nofsroot=$(get_mount_info SOURCE target "$_mnt" -v -f) - if [[ $_src_nofsroot == "$_src" ]]; then - echo "$_mnt$_path" && return - fi - - _fsroot=${_src#${_src_nofsroot}[} - _fsroot=${_fsroot%]} - _mnt=$(get_mount_info TARGET source "$_src_nofsroot" -f) - - # for btrfs, _fsroot will also contain the subvol value as well, strip it - if [[ $_fstype == btrfs ]]; then - local _subvol - _subvol=${_opt#*subvol=} - _subvol=${_subvol%,*} - _fsroot=${_fsroot#$_subvol} - fi - echo "$_mnt$_fsroot$_path" -} - -get_mntopt_from_target() -{ - get_mount_info OPTIONS source "$1" -f -} - -# Get the path where the target will be mounted in kdump kernel -# $1: kdump target device -get_kdump_mntpoint_from_target() -{ - local _mntpoint - - _mntpoint=$(get_mntpoint_from_target "$1") - # mount under /sysroot if dump to root disk or mount under - # mount under /kdumproot if dump target is not mounted in first kernel - # mount under /kdumproot/$_mntpoint in other cases in 2nd kernel. - # systemd will be in charge to umount it. - if [[ -z $_mntpoint ]]; then - _mntpoint="/kdumproot" - else - if [[ $_mntpoint == "/" ]]; then - _mntpoint="/sysroot" - else - _mntpoint="/kdumproot/$_mntpoint" - fi - fi - - # strip duplicated "/" - echo $_mntpoint | tr -s "/" -} - -kdump_get_persistent_dev() -{ - local dev="${1//\"/}" - - case "$dev" in - UUID=*) - dev=$(blkid -U "${dev#UUID=}") - ;; - LABEL=*) - dev=$(blkid -L "${dev#LABEL=}") - ;; - esac - echo $(get_persistent_dev "$dev") -} - -is_ostree() -{ - test -f /run/ostree-booted -} - -# get ip address or hostname from nfs/ssh config value -get_remote_host() -{ - local _config_val=$1 - - # ipv6 address in kdump.conf is around with "[]", - # factor out the ipv6 address - _config_val=${_config_val#*@} - _config_val=${_config_val%:/*} - _config_val=${_config_val#[} - _config_val=${_config_val%]} - echo "$_config_val" -} - -is_hostname() -{ - local _hostname - - _hostname=$(echo "$1" | grep ":") - if [[ -n $_hostname ]]; then - return 1 - fi - echo "$1" | grep -q "[a-zA-Z]" -} - -# Copied from "/etc/sysconfig/network-scripts/network-functions" -get_hwaddr() -{ - if [[ -f "/sys/class/net/$1/address" ]]; then - awk '{ print toupper($0) }' < "/sys/class/net/$1/address" - elif [[ -d "/sys/class/net/$1" ]]; then - LC_ALL="" LANG="" ip -o link show "$1" 2> /dev/null | - awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, - "\\1", 1)); }' - fi -} - -# Get value by a field using "nmcli -g" -# Usage: get_nmcli_value_by_field -# -# "nmcli --get-values" allows us to retrive value(s) by field, for example, -# nmcli --get-values connection show /org/freedesktop/NetworkManager/ActiveConnection/1 -# returns the following value for the corresponding field respectively, -# Field Value -# IP4.DNS "10.19.42.41 | 10.11.5.19 | 10.5.30.160" -# 802-3-ethernet.s390-subchannels "" -# bond.options "mode=balance-rr" -get_nmcli_value_by_field() -{ - LANG=C nmcli --get-values "$@" -} - -# Get nmcli field value of an connection apath (a D-Bus active connection path) -# Usage: get_nmcli_field_by_apath -get_nmcli_field_by_conpath() -{ - local _field=$1 _apath=$2 - - get_nmcli_value_by_field "$_field" connection show "$_apath" -} - -# Get nmcli connection apath (a D-Bus active connection path ) by ifname -# -# apath is used for nmcli connection operations, e.g. -# $ nmcli connection show $apath -get_nmcli_connection_apath_by_ifname() -{ - local _ifname=$1 - - get_nmcli_value_by_field "GENERAL.CON-PATH" device show "$_ifname" -} - -get_ifcfg_by_device() -{ - grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \ - /etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1 -} - -get_ifcfg_by_hwaddr() -{ - grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \ - /etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1 -} - -get_ifcfg_by_uuid() -{ - grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \ - /etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1 -} - -get_ifcfg_by_name() -{ - grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \ - /etc/sysconfig/network-scripts/ifcfg-* 2> /dev/null | head -1 -} - -is_nm_running() -{ - [[ "$(LANG=C nmcli -t --fields running general status 2> /dev/null)" == "running" ]] -} - -is_nm_handling() -{ - LANG=C nmcli -t --fields device,state dev status 2> /dev/null | - grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$" -} - -# $1: netdev name -get_ifcfg_nmcli() -{ - local nm_uuid nm_name - local ifcfg_file - - # Get the active nmcli config name of $1 - if is_nm_running && is_nm_handling "${1}"; then - # The configuration "uuid" and "name" generated by nm is wrote to - # the ifcfg file as "UUID=" and "NAME=". - nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2> /dev/null | - grep "${1}" | head -1 | cut -d':' -f1) - nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2> /dev/null | - grep "${1}" | head -1 | cut -d':' -f1) - ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}") - [[ -z ${ifcfg_file} ]] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}") - fi - - echo -n "${ifcfg_file}" -} - -# $1: netdev name -get_ifcfg_legacy() -{ - local ifcfg_file hwaddr - - ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}" - [[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return - - ifcfg_file=$(get_ifcfg_by_name "${1}") - [[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return - - hwaddr=$(get_hwaddr "${1}") - if [[ -n $hwaddr ]]; then - ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}") - [[ -f ${ifcfg_file} ]] && echo -n "${ifcfg_file}" && return - fi - - ifcfg_file=$(get_ifcfg_by_device "${1}") - - echo -n "${ifcfg_file}" -} - -# $1: netdev name -# Return the ifcfg file whole name(including the path) of $1 if any. -get_ifcfg_filename() -{ - local ifcfg_file - - ifcfg_file=$(get_ifcfg_nmcli "${1}") - if [[ -z ${ifcfg_file} ]]; then - ifcfg_file=$(get_ifcfg_legacy "${1}") - fi - - echo -n "${ifcfg_file}" -} - -# returns 0 when omission of a module is desired in dracut_args -# returns 1 otherwise -is_dracut_mod_omitted() -{ - local dracut_args dracut_mod=$1 - - set -- $(kdump_get_conf_val dracut_args) - while [ $# -gt 0 ]; do - case $1 in - -o | --omit) - [[ " ${2//[^[:alnum:]]/ } " == *" $dracut_mod "* ]] && return 0 - ;; - esac - shift - done - - return 1 -} - -is_wdt_active() -{ - local active - - [[ -d /sys/class/watchdog ]] || return 1 - for dir in /sys/class/watchdog/*; do - [[ -f "$dir/state" ]] || continue - active=$(< "$dir/state") - [[ $active == "active" ]] && return 0 - done - return 1 -} - -have_compression_in_dracut_args() -{ - [[ "$(kdump_get_conf_val dracut_args)" =~ \ - (^|[[:space:]])--(gzip|bzip2|lzma|xz|lzo|lz4|zstd|no-compress|compress)([[:space:]]|$) ]] -} - -# If "dracut_args" contains "--mount" information, use it -# directly without any check(users are expected to ensure -# its correctness). -is_mount_in_dracut_args() -{ - [[ " $(kdump_get_conf_val dracut_args)" =~ .*[[:space:]]--mount[=[:space:]].* ]] -} - -check_crash_mem_reserved() -{ - local mem_reserved - - mem_reserved=$(< /sys/kernel/kexec_crash_size) - if [[ $mem_reserved -eq 0 ]]; then - derror "No memory reserved for crash kernel" - return 1 - fi - - return 0 -} - -check_kdump_feasibility() -{ - if [[ ! -e /sys/kernel/kexec_crash_loaded ]]; then - derror "Kdump is not supported on this kernel" - return 1 - fi - check_crash_mem_reserved - return $? -} - -check_current_kdump_status() -{ - if [[ ! -f /sys/kernel/kexec_crash_loaded ]]; then - derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel" - return 1 - fi - - rc=$(< /sys/kernel/kexec_crash_loaded) - if [[ $rc == 1 ]]; then - return 0 - else - return 1 - fi -} - -# remove_cmdline_param [] ... [] -# Remove a list of kernel parameters from a given kernel cmdline and print the result. -# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists. -remove_cmdline_param() -{ - local cmdline=$1 - shift - - for arg in "$@"; do - cmdline=$(echo "$cmdline" | - sed -e "s/\b$arg=[^ ]*//g" \ - -e "s/^$arg\b//g" \ - -e "s/[[:space:]]$arg\b//g" \ - -e "s/\s\+/ /g") - done - echo "$cmdline" -} - -# -# This function returns the "apicid" of the boot -# cpu (cpu 0) if present. -# -get_bootcpu_apicid() -{ - awk ' \ - BEGIN { CPU = "-1"; } \ - $1=="processor" && $2==":" { CPU = $NF; } \ - CPU=="0" && /^apicid/ { print $NF; } \ - ' \ - /proc/cpuinfo -} - -# -# append_cmdline -# This function appends argument "$2=$3" to string ($1) if not already present. -# -append_cmdline() -{ - local cmdline=$1 - local newstr=${cmdline/$2/""} - - # unchanged str implies argument wasn't there - if [[ $cmdline == "$newstr" ]]; then - cmdline="${cmdline} ${2}=${3}" - fi - - echo "$cmdline" -} - -# This function check iomem and determines if we have more than -# 4GB of ram available. Returns 1 if we do, 0 if we dont -need_64bit_headers() -{ - return "$(tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); - print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }')" -} - -# Check if secure boot is being enforced. -# -# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and -# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four -# bytes are the attributes associated with the variable and can safely be -# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot -# is 1 and SetupMode is 0, then secure boot is being enforced. -# -# Assume efivars is mounted at /sys/firmware/efi/efivars. -is_secure_boot_enforced() -{ - local secure_boot_file setup_mode_file - local secure_boot_byte setup_mode_byte - - # On powerpc, secure boot is enforced if: - # host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists - # guest secure boot: /ibm,secure-boot >= 2 - if [[ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]]; then - return 0 - fi - if [[ -f /proc/device-tree/ibm,secure-boot ]] && - [[ $(lsprop /proc/device-tree/ibm,secure-boot | tail -1) -ge 2 ]]; then - return 0 - fi - - # Detect secure boot on x86 and arm64 - secure_boot_file=$(find /sys/firmware/efi/efivars -name "SecureBoot-*" 2> /dev/null) - setup_mode_file=$(find /sys/firmware/efi/efivars -name "SetupMode-*" 2> /dev/null) - - if [[ -f $secure_boot_file ]] && [[ -f $setup_mode_file ]]; then - secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' "$secure_boot_file" | cut -d' ' -f 5) - setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' "$setup_mode_file" | cut -d' ' -f 5) - - if [[ $secure_boot_byte == "1" ]] && [[ $setup_mode_byte == "0" ]]; then - return 0 - fi - fi - - # Detect secure boot on s390x - if [[ -e "/sys/firmware/ipl/secure" && "$(< /sys/firmware/ipl/secure)" == "1" ]]; then - return 0 - fi - - return 1 -} - -# -# prepare_kexec_args -# This function prepares kexec argument. -# -prepare_kexec_args() -{ - local kexec_args=$1 - local found_elf_args - - ARCH=$(uname -m) - if [[ $ARCH == "i686" ]] || [[ $ARCH == "i386" ]]; then - need_64bit_headers - if [[ $? == 1 ]]; then - found_elf_args=$(echo "$kexec_args" | grep elf32-core-headers) - if [[ -n $found_elf_args ]]; then - dwarn "Warning: elf32-core-headers overrides correct elf64 setting" - else - kexec_args="$kexec_args --elf64-core-headers" - fi - else - found_elf_args=$(echo "$kexec_args" | grep elf64-core-headers) - if [[ -z $found_elf_args ]]; then - kexec_args="$kexec_args --elf32-core-headers" - fi - fi - fi - echo "$kexec_args" -} - -# prepare_kdump_kernel -# This function return kdump_kernel given a kernel version. -prepare_kdump_kernel() -{ - local kdump_kernelver=$1 - local dir img boot_dirlist boot_imglist kdump_kernel machine_id - read -r machine_id < /etc/machine-id - - boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"} - boot_imglist="$KDUMP_IMG-$kdump_kernelver$KDUMP_IMG_EXT $machine_id/$kdump_kernelver/$KDUMP_IMG" - - # The kernel of OSTree based systems is not in the standard locations. - if is_ostree; then - boot_dirlist="$(echo /boot/ostree/*) $boot_dirlist" - fi - - # Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format - boot_img="$(grep -P -o '^BOOT_IMAGE=(\S+)' /proc/cmdline | sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\)/\2/")" - if [[ "$boot_img" == *"$kdump_kernelver" ]]; then - boot_imglist="$boot_img $boot_imglist" - fi - - for dir in $boot_dirlist; do - for img in $boot_imglist; do - if [[ -f "$dir/$img" ]]; then - kdump_kernel=$(echo "$dir/$img" | tr -s '/') - break 2 - fi - done - done - echo "$kdump_kernel" -} - -# -# Detect initrd and kernel location, results are stored in global environmental variables: -# KDUMP_BOOTDIR, KDUMP_KERNELVER, KDUMP_KERNEL, DEFAULT_INITRD, and KDUMP_INITRD -# -# Expectes KDUMP_BOOTDIR, KDUMP_IMG, KDUMP_IMG_EXT, KDUMP_KERNELVER to be loaded from config already -# and will prefer already set values so user can specify custom kernel/initramfs location -# -prepare_kdump_bootinfo() -{ - local boot_initrdlist nondebug_kernelver debug_kernelver - local default_initrd_base var_target_initrd_dir - - if [[ -z $KDUMP_KERNELVER ]]; then - KDUMP_KERNELVER=$(uname -r) - nondebug_kernelver=$(sed -n -e 's/\(.*\)+debug$/\1/p' <<< "$KDUMP_KERNELVER") - fi - - # Use nondebug kernel if possible, because debug kernel will consume more memory and may oom. - if [[ -n $nondebug_kernelver ]]; then - dinfo "Trying to use $nondebug_kernelver." - debug_kernelver=$KDUMP_KERNELVER - KDUMP_KERNELVER=$nondebug_kernelver - fi - - KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER") - - if ! [[ -e $KDUMP_KERNEL ]]; then - if [[ -n $debug_kernelver ]]; then - dinfo "Fallback to using debug kernel" - KDUMP_KERNELVER=$debug_kernelver - KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER") - fi - fi - - if ! [[ -e $KDUMP_KERNEL ]]; then - derror "Failed to detect kdump kernel location" - return 1 - fi - - if [[ "$KDUMP_KERNEL" == *"+debug" ]]; then - dwarn "Using debug kernel, you may need to set a larger crashkernel than the default value." - fi - - # Set KDUMP_BOOTDIR to where kernel image is stored - KDUMP_BOOTDIR=$(dirname "$KDUMP_KERNEL") - - # Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR - boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd" - for initrd in $boot_initrdlist; do - if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then - default_initrd_base="$initrd" - DEFAULT_INITRD="$KDUMP_BOOTDIR/$default_initrd_base" - break - fi - done - - # Create kdump initrd basename from default initrd basename - # initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img - # initrd => initrdkdump - if [[ -z $default_initrd_base ]]; then - kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img - elif [[ $default_initrd_base == *.* ]]; then - kdump_initrd_base=${default_initrd_base%.*}kdump.${DEFAULT_INITRD##*.} - else - kdump_initrd_base=${default_initrd_base}kdump - fi - - # Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable - if [[ ! -w $KDUMP_BOOTDIR ]]; then - var_target_initrd_dir="/var/lib/kdump" - mkdir -p "$var_target_initrd_dir" - KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base" - else - KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base" - fi -} - -get_watchdog_drvs() -{ - local _wdtdrvs _drv _dir - - for _dir in /sys/class/watchdog/*; do - # device/modalias will return driver of this device - [[ -f "$_dir/device/modalias" ]] || continue - _drv=$(< "$_dir/device/modalias") - _drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R "$_drv" 2> /dev/null) - for i in $_drv; do - if ! [[ " $_wdtdrvs " == *" $i "* ]]; then - _wdtdrvs="$_wdtdrvs $i" - fi - done - done - - echo "$_wdtdrvs" -} - -# -# prepare_cmdline -# This function performs a series of edits on the command line. -# Store the final result in global $KDUMP_COMMANDLINE. -prepare_cmdline() -{ - local cmdline id arg - - if [[ -z $1 ]]; then - cmdline=$(< /proc/cmdline) - else - cmdline="$1" - fi - - # These params should always be removed - cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn) - # These params can be removed configurably - while read -r arg; do - cmdline=$(remove_cmdline_param "$cmdline" "$arg") - done <<< "$(echo "$2" | xargs -n 1 echo)" - - # Always remove "root=X", as we now explicitly generate all kinds - # of dump target mount information including root fs. - # - # We do this before KDUMP_COMMANDLINE_APPEND, if one really cares - # about it(e.g. for debug purpose), then can pass "root=X" using - # KDUMP_COMMANDLINE_APPEND. - cmdline=$(remove_cmdline_param "$cmdline" root) - - # With the help of "--hostonly-cmdline", we can avoid some interitage. - cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe) - - # Remove netroot, rd.iscsi.initiator and iscsi_initiator since - # we get duplicate entries for the same in case iscsi code adds - # it as well. - cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator) - - cmdline="${cmdline} $3" - - id=$(get_bootcpu_apicid) - if [[ -n ${id} ]]; then - cmdline=$(append_cmdline "$cmdline" disable_cpu_apicid "$id") - fi - - # If any watchdog is used, set it's pretimeout to 0. pretimeout let - # watchdog panic the kernel first, and reset the system after the - # panic. If the system is already in kdump, panic is not helpful - # and only increase the chance of watchdog failure. - for i in $(get_watchdog_drvs); do - cmdline+=" $i.pretimeout=0" - - if [[ $i == hpwdt ]]; then - # hpwdt have a special parameter kdumptimeout, is's only suppose - # to be set to non-zero in first kernel. In kdump, non-zero - # value could prevent the watchdog from resetting the system. - cmdline+=" $i.kdumptimeout=0" - fi - done - - echo "$cmdline" -} - -PROC_IOMEM=/proc/iomem -#get system memory size i.e. memblock.memory.total_size in the unit of GB -get_system_size() -{ - sum=$(sed -n "s/\s*\([0-9a-fA-F]\+\)-\([0-9a-fA-F]\+\) : System RAM$/+ 0x\2 - 0x\1 + 1/p" $PROC_IOMEM) - echo $(( (sum) / 1024 / 1024 / 1024)) -} - -# Return the recommended size for the reserved crashkernel memory -# depending on the system memory size. -# -# This functions is expected to be consistent with the parse_crashkernel_mem() -# in kernel i.e. how kernel allocates the kdump memory given the crashkernel -# parameter crashkernel=range1:size1[,range2:size2,…] and the system memory -# size. -get_recommend_size() -{ - local mem_size=$1 - local _ck_cmdline=$2 - local range start start_unit end end_unit size - - while read -r -d , range; do - # need to use non-default IFS as double spaces are used as a - # single delimiter while commas aren't... - IFS=, read start start_unit end end_unit size <<< \ - "$(echo "$range" | sed -n "s/\([0-9]\+\)\([GT]\?\)-\([0-9]*\)\([GT]\?\):\([0-9]\+[MG]\)/\1,\2,\3,\4,\5/p")" - - # aka. 102400T - end=${end:-104857600} - [[ "$end_unit" == T ]] && end=$((end * 1024)) - [[ "$start_unit" == T ]] && start=$((start * 1024)) - - if [[ $mem_size -ge $start ]] && [[ $mem_size -lt $end ]]; then - echo "$size" - return - fi - - # append a ',' as read expects the 'file' to end with a delimiter - done <<< "$_ck_cmdline," - - # no matching range found - echo "0M" -} - -# get default crashkernel -# $1 dump mode, if not specified, dump_mode will be judged by is_fadump_capable -kdump_get_arch_recommend_crashkernel() -{ - local _arch _ck_cmdline _dump_mode - - if [[ -z "$1" ]]; then - if is_fadump_capable; then - _dump_mode=fadump - else - _dump_mode=kdump - fi - else - _dump_mode=$1 - fi - - _arch=$(uname -m) - - if [[ $_arch == "x86_64" ]] || [[ $_arch == "s390x" ]]; then - _ck_cmdline="1G-4G:192M,4G-64G:256M,64G-:512M" - elif [[ $_arch == "aarch64" ]]; then - # For 4KB page size, the formula is based on x86 plus extra = 64M - _ck_cmdline="1G-4G:256M,4G-64G:320M,64G-:576M" - elif [[ $_arch == "ppc64le" ]]; then - if [[ $_dump_mode == "fadump" ]]; then - _ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G" - else - _ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G" - fi - fi - - echo -n "$_ck_cmdline" -} - -# return recommended size based on current system RAM size -# $1: kernel version, if not set, will defaults to $(uname -r) -kdump_get_arch_recommend_size() -{ - local _ck_cmdline _sys_mem - - if ! [[ -r "/proc/iomem" ]]; then - echo "Error, can not access /proc/iomem." - return 1 - fi - _sys_mem=$(get_system_size) - _ck_cmdline=$(kdump_get_arch_recommend_crashkernel) - _ck_cmdline=${_ck_cmdline//-:/-102400T:} - get_recommend_size "$_sys_mem" "$_ck_cmdline" -} - -# Print all underlying crypt devices of a block device -# print nothing if device is not on top of a crypt device -# $1: the block device to be checked in maj:min format -get_luks_crypt_dev() -{ - local _type - - [[ -b /dev/block/$1 ]] || return 1 - - _type=$(blkid -u filesystem,crypto -o export -- "/dev/block/$1" | \ - sed -n -E "s/^TYPE=(.*)$/\1/p") - [[ $_type == "crypto_LUKS" ]] && echo "$1" - - for _x in "/sys/dev/block/$1/slaves/"*; do - [[ -f $_x/dev ]] || continue - [[ $_x/subsystem -ef /sys/class/block ]] || continue - get_luks_crypt_dev "$(< "$_x/dev")" - done -} - -# kdump_get_maj_min -# Prints the major and minor of a device node. -# Example: -# $ get_maj_min /dev/sda2 -# 8:2 -kdump_get_maj_min() -{ - local _majmin - _majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)" - printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))" -} - -get_all_kdump_crypt_dev() -{ - local _dev - - for _dev in $(get_block_dump_target); do - get_luks_crypt_dev "$(kdump_get_maj_min "$_dev")" - done -} - -check_vmlinux() -{ - # Use readelf to check if it's a valid ELF - readelf -h "$1" &> /dev/null || return 1 -} - -get_vmlinux_size() -{ - local size=0 _msize - - while read -r _msize; do - size=$((size + _msize)) - done <<< "$(readelf -l -W "$1" | awk '/^ LOAD/{print $6}' 2> /dev/stderr)" - - echo $size -} - -try_decompress() -{ - # The obscure use of the "tr" filter is to work around older versions of - # "grep" that report the byte offset of the line instead of the pattern. - - # Try to find the header ($1) and decompress from here - for pos in $(tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"); do - if ! type -P "$3" > /dev/null; then - ddebug "Signiature detected but '$3' is missing, skip this decompressor" - break - fi - - pos=${pos%%:*} - tail "-c+$pos" "$img" | $3 > "$5" 2> /dev/null - if check_vmlinux "$5"; then - ddebug "Kernel is extracted with '$3'" - return 0 - fi - done - - return 1 -} - -# Borrowed from linux/scripts/extract-vmlinux -get_kernel_size() -{ - # Prepare temp files: - local tmp img=$1 - - tmp=$(mktemp /tmp/vmlinux-XXX) - trap 'rm -f "$tmp"' 0 - - # Try to check if it's a vmlinux already - check_vmlinux "$img" && get_vmlinux_size "$img" && return 0 - - # That didn't work, so retry after decompression. - try_decompress '\037\213\010' xy gunzip "$img" "$tmp" || - try_decompress '\3757zXZ\000' abcde unxz "$img" "$tmp" || - try_decompress 'BZh' xy bunzip2 "$img" "$tmp" || - try_decompress '\135\0\0\0' xxx unlzma "$img" "$tmp" || - try_decompress '\211\114\132' xy 'lzop -d' "$img" "$tmp" || - try_decompress '\002!L\030' xxx 'lz4 -d' "$img" "$tmp" || - try_decompress '(\265/\375' xxx unzstd "$img" "$tmp" - - # Finally check for uncompressed images or objects: - [[ $? -eq 0 ]] && get_vmlinux_size "$tmp" && return 0 - - # Fallback to use iomem - local _size=0 _seg - while read -r _seg; do - _size=$((_size + 0x${_seg#*-} - 0x${_seg%-*})) - done <<< "$(grep -E "Kernel (code|rodata|data|bss)" /proc/iomem | cut -d ":" -f 1)" - echo $_size -} diff --git a/kdump-logger.sh b/kdump-logger.sh deleted file mode 100755 index 3fd433d..0000000 --- a/kdump-logger.sh +++ /dev/null @@ -1,355 +0,0 @@ -#!/bin/sh -# -# This comes from the dracut-logger.sh -# -# The logger defined 4 logging levels: -# - ddebug (4) -# The DEBUG Level designates fine-grained informational events that are most -# useful to debug an application. -# - dinfo (3) -# The INFO level designates informational messages that highlight the -# progress of the application at coarse-grained level. -# - dwarn (2) -# The WARN level designates potentially harmful situations. -# - derror (1) -# The ERROR level designates error events that might still allow the -# application to continue running. -# -# Logging is controlled by following global variables: -# - @var kdump_stdloglvl - logging level to standard error (console output) -# - @var kdump_sysloglvl - logging level to syslog (by logger command) -# - @var kdump_kmsgloglvl - logging level to /dev/kmsg (only for boot-time) -# -# If any of the variables is not set, the function dlog_init() sets it to default: -# - In the first kernel: -# - @var kdump_stdloglvl = 3 (info) -# - @var kdump_sysloglvl = 0 (no logging) -# - @var kdump_kmsgloglvl = 0 (no logging) -# -# -In the second kernel: -# - @var kdump_stdloglvl = 0 (no logging) -# - @var kdump_sysloglvl = 3 (info) -# - @var kdump_kmsgloglvl = 0 (no logging) -# -# First of all you have to start with dlog_init() function which initializes -# required variables. Don't call any other logging function before that one! -# -# The code in this file might be run in an environment without bash. -# Any code added must be POSIX compliant. - -# Define vairables for the log levels in this module. -kdump_stdloglvl="" -kdump_sysloglvl="" -kdump_kmsgloglvl="" - -# The dracut-lib.sh is only available in the second kernel, and it won't -# be used in the first kernel because the dracut-lib.sh is invisible in -# the first kernel. -if [ -f /lib/dracut-lib.sh ]; then - . /lib/dracut-lib.sh -fi - -# @brief Get the log level from kernel command line. -# @retval 1 if something has gone wrong -# @retval 0 on success. -# -get_kdump_loglvl() -{ - [ -f /lib/dracut-lib.sh ] && kdump_sysloglvl=$(getarg rd.kdumploglvl) - [ -z "$kdump_sysloglvl" ] && return 1; - - if [ -f /lib/dracut-lib.sh ] && ! isdigit "$kdump_sysloglvl"; then - return 1 - fi - - return 0 -} - -# @brief Check the log level. -# @retval 1 if something has gone wrong -# @retval 0 on success. -# -check_loglvl() -{ - case "$1" in - 0|1|2|3|4) - return 0 - ;; - *) - return 1 - ;; - esac -} - -# @brief Initializes Logger. -# @retval 1 if something has gone wrong -# @retval 0 on success. -# -dlog_init() { - ret=0 - - if [ -s /proc/vmcore ];then - if ! get_kdump_loglvl; then - logger -t "kdump[$$]" -p warn -- "Kdump is using the default log level(3)." - kdump_sysloglvl=3 - fi - kdump_stdloglvl=0 - kdump_kmsgloglvl=0 - else - kdump_stdloglvl=$KDUMP_STDLOGLVL - kdump_sysloglvl=$KDUMP_SYSLOGLVL - kdump_kmsgloglvl=$KDUMP_KMSGLOGLVL - fi - - [ -z "$kdump_stdloglvl" ] && kdump_stdloglvl=3 - [ -z "$kdump_sysloglvl" ] && kdump_sysloglvl=0 - [ -z "$kdump_kmsgloglvl" ] && kdump_kmsgloglvl=0 - - for loglvl in "$kdump_stdloglvl" "$kdump_kmsgloglvl" "$kdump_sysloglvl"; do - if ! check_loglvl "$loglvl"; then - echo "Illegal log level: $kdump_stdloglvl $kdump_kmsgloglvl $kdump_sysloglvl" - return 1 - fi - done - - # Skip initialization if it's already done. - [ -n "$kdump_maxloglvl" ] && return 0 - - if [ "$UID" -ne 0 ]; then - kdump_kmsgloglvl=0 - kdump_sysloglvl=0 - fi - - if [ "$kdump_sysloglvl" -gt 0 ]; then - if [ -d /run/systemd/journal ] \ - && systemd-cat --version 1>/dev/null 2>&1 \ - && systemctl --quiet is-active systemd-journald.socket 1>/dev/null 2>&1; then - readonly _systemdcatfile="/var/tmp/systemd-cat" - mkfifo "$_systemdcatfile" 1>/dev/null 2>&1 - readonly _dlogfd=15 - systemd-cat -t 'kdump' --level-prefix=true <"$_systemdcatfile" & - exec 15>"$_systemdcatfile" - elif ! [ -S /dev/log ] && [ -w /dev/log ] || ! command -v logger >/dev/null; then - # We cannot log to syslog, so turn this facility off. - kdump_kmsgloglvl=$kdump_sysloglvl - kdump_sysloglvl=0 - ret=1 - errmsg="No '/dev/log' or 'logger' included for syslog logging" - fi - fi - - kdump_maxloglvl=0 - for _dlog_lvl in $kdump_stdloglvl $kdump_sysloglvl $kdump_kmsgloglvl; do - [ $_dlog_lvl -gt $kdump_maxloglvl ] && kdump_maxloglvl=$_dlog_lvl - done - readonly kdump_maxloglvl - export kdump_maxloglvl - - if [ $kdump_stdloglvl -lt 4 ] && [ $kdump_kmsgloglvl -lt 4 ] && [ $kdump_sysloglvl -lt 4 ]; then - unset ddebug - ddebug() { :; }; - fi - - if [ $kdump_stdloglvl -lt 3 ] && [ $kdump_kmsgloglvl -lt 3 ] && [ $kdump_sysloglvl -lt 3 ]; then - unset dinfo - dinfo() { :; }; - fi - - if [ $kdump_stdloglvl -lt 2 ] && [ $kdump_kmsgloglvl -lt 2 ] && [ $kdump_sysloglvl -lt 2 ]; then - unset dwarn - dwarn() { :; }; - unset dwarning - dwarning() { :; }; - fi - - if [ $kdump_stdloglvl -lt 1 ] && [ $kdump_kmsgloglvl -lt 1 ] && [ $kdump_sysloglvl -lt 1 ]; then - unset derror - derror() { :; }; - fi - - [ -n "$errmsg" ] && derror "$errmsg" - - return $ret -} - -## @brief Converts numeric level to logger priority defined by POSIX.2. -# -# @param $1: Numeric logging level in range from 1 to 4. -# @retval 1 if @a lvl is out of range. -# @retval 0 if @a lvl is correct. -# @result Echoes logger priority. -_lvl2syspri() { - case "$1" in - 1) echo error;; - 2) echo warning;; - 3) echo info;; - 4) echo debug;; - *) return 1;; - esac -} - -## @brief Converts logger numeric level to syslog log level -# -# @param $1: Numeric logging level in range from 1 to 4. -# @retval 1 if @a lvl is out of range. -# @retval 0 if @a lvl is correct. -# @result Echoes kernel console numeric log level -# -# Conversion is done as follows: -# -# -# none -> LOG_EMERG (0) -# none -> LOG_ALERT (1) -# none -> LOG_CRIT (2) -# ERROR(1) -> LOG_ERR (3) -# WARN(2) -> LOG_WARNING (4) -# none -> LOG_NOTICE (5) -# INFO(3) -> LOG_INFO (6) -# DEBUG(4) -> LOG_DEBUG (7) -# -# -# @see /usr/include/sys/syslog.h -_dlvl2syslvl() { - case "$1" in - 1) set -- 3;; - 2) set -- 4;; - 3) set -- 6;; - 4) set -- 7;; - *) return 1;; - esac - - # The number is constructed by multiplying the facility by 8 and then - # adding the level. - # About The Syslog Protocol, please refer to the RFC5424 for more details. - echo $((24 + $1)) -} - -## @brief Prints to stderr, to syslog and/or /dev/kmsg given message with -# given level (priority). -# -# @param $1: Numeric logging level. -# @param $2: Message. -# @retval 0 It's always returned, even if logging failed. -# -# @note This function is not supposed to be called manually. Please use -# dinfo(), ddebug(), or others instead which wrap this one. -# -# This is core logging function which logs given message to standard error -# and/or syslog (with POSIX shell command logger) and/or to /dev/kmsg. -# The format is following: -# -# X: some message -# -# where @c X is the first letter of logging level. See module description for -# details on that. -# -# Message to syslog is sent with tag @c kdump. Priorities are mapped as -# following: -# - @c ERROR to @c error -# - @c WARN to @c warning -# - @c INFO to @c info -# - @c DEBUG to @c debug -_do_dlog() { - [ "$1" -le $kdump_stdloglvl ] && printf -- 'kdump: %s\n' "$2" >&2 - - if [ "$1" -le $kdump_sysloglvl ]; then - if [ "$_dlogfd" ]; then - printf -- "<%s>%s\n" "$(($(_dlvl2syslvl "$1") & 7))" "$2" 1>&$_dlogfd - else - logger -t "kdump[$$]" -p "$(_lvl2syspri "$1")" -- "$2" - fi - fi - - [ "$1" -le $kdump_kmsgloglvl ] && \ - echo "<$(_dlvl2syslvl "$1")>kdump[$$] $2" >/dev/kmsg -} - -## @brief Internal helper function for _do_dlog() -# -# @param $1: Numeric logging level. -# @param $2 [...]: Message. -# @retval 0 It's always returned, even if logging failed. -# -# @note This function is not supposed to be called manually. Please use -# dinfo(), ddebug(), or others instead which wrap this one. -# -# This function calls _do_dlog() either with parameter msg, or if -# none is given, it will read standard input and will use every line as -# a message. -# -# This enables: -# dwarn "This is a warning" -# echo "This is a warning" | dwarn -dlog() { - [ -z "$kdump_maxloglvl" ] && return 0 - [ "$1" -le "$kdump_maxloglvl" ] || return 0 - - if [ $# -gt 1 ]; then - _dlog_lvl=$1; shift - _do_dlog "$_dlog_lvl" "$*" - else - while read -r line || [ -n "$line" ]; do - _do_dlog "$1" "$line" - done - fi -} - -## @brief Logs message at DEBUG level (4) -# -# @param msg Message. -# @retval 0 It's always returned, even if logging failed. -ddebug() { - set +x - dlog 4 "$@" - if [ -n "$debug" ]; then - set -x - fi -} - -## @brief Logs message at INFO level (3) -# -# @param msg Message. -# @retval 0 It's always returned, even if logging failed. -dinfo() { - set +x - dlog 3 "$@" - if [ -n "$debug" ]; then - set -x - fi -} - -## @brief Logs message at WARN level (2) -# -# @param msg Message. -# @retval 0 It's always returned, even if logging failed. -dwarn() { - set +x - dlog 2 "$@" - if [ -n "$debug" ]; then - set -x - fi -} - -## @brief It's an alias to dwarn() function. -# -# @param msg Message. -# @retval 0 It's always returned, even if logging failed. -dwarning() { - set +x - dwarn "$@" - if [ -n "$debug" ]; then - set -x - fi -} - -## @brief Logs message at ERROR level (1) -# -# @param msg Message. -# @retval 0 It's always returned, even if logging failed. -derror() { - set +x - dlog 1 "$@" - if [ -n "$debug" ]; then - set -x - fi -} diff --git a/kdump-migrate-action.sh b/kdump-migrate-action.sh deleted file mode 100755 index c516639..0000000 --- a/kdump-migrate-action.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -systemctl is-active kdump -if [ $? -ne 0 ]; then - exit 0 -fi - -/usr/lib/kdump/kdump-restart.sh diff --git a/kdump-restart.sh b/kdump-restart.sh deleted file mode 100644 index a9ecfc1..0000000 --- a/kdump-restart.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -export PATH="$PATH:/usr/bin:/usr/sbin" - -exec >>/var/log/kdump-migration.log 2>&1 - -echo "kdump: Partition Migration detected. Rebuilding initramfs image to reload." -/usr/bin/kdumpctl rebuild -/usr/bin/kdumpctl reload diff --git a/kdump-udev-throttler b/kdump-udev-throttler deleted file mode 100755 index cd77a31..0000000 --- a/kdump-udev-throttler +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash -# This util helps to reduce the workload of kdump service restarting -# on udev event. When hotplugging memory / CPU, multiple udev -# events may be triggered concurrently, and obviously, we don't want -# to restart kdump service for each event. - -# This script will be called by udev, and make sure kdump service is -# restart after all events we are watching are settled. - -# On each call, this script will update try to aquire the $throttle_lock -# The first instance acquired the file lock will keep waiting for events -# to settle and then reload kdump. Other instances will just exit -# In this way, we can make sure kdump service is restarted immediately -# and for exactly once after udev events are settled. - -throttle_lock="/var/lock/kdump-udev-throttle" - -exec 9>$throttle_lock -if [ $? -ne 0 ]; then - echo "Failed to create the lock file! Fallback to non-throttled kdump service restart" - /bin/kdumpctl reload - exit 1 -fi - -flock -n 9 -if [ $? -ne 0 ]; then - echo "Throttling kdump restart for concurrent udev event" - exit 0 -fi - -# Wait for at least 1 second, at most 4 seconds for udev to settle -# Idealy we will have a less than 1 second lag between udev events settle -# and kdump reload -sleep 1 && udevadm settle --timeout 3 - -# Release the lock, /bin/kdumpctl will block and make the process -# holding two locks at the same time and we might miss some events -exec 9>&- - -/bin/kdumpctl reload - -exit 0 diff --git a/kdump.conf b/kdump.conf deleted file mode 100644 index d4fc78b..0000000 --- a/kdump.conf +++ /dev/null @@ -1,192 +0,0 @@ -# This file contains a series of commands to perform (in order) in the kdump -# kernel after a kernel crash in the crash kernel(1st kernel) has happened. -# -# Directives in this file are only applicable to the kdump initramfs, and have -# no effect once the root filesystem is mounted and the normal init scripts are -# processed. -# -# Currently, only one dump target and path can be specified. If the dumping to -# the configured target fails, the failure action which can be configured via -# the "failure_action" directive will be performed. -# -# Supported options: -# -# auto_reset_crashkernel -# - whether to reset kernel crashkernel to new default value -# or not when kexec-tools updates the default crashkernel value and -# existing kernels using the old default kernel crashkernel value. -# The default value is yes. -# -# raw -# - Will dd /proc/vmcore into . -# Use persistent device names for partition devices, -# such as /dev/vg/. -# -# nfs -# - Will mount nfs to , and copy /proc/vmcore to -# //%HOST-%DATE/, supports DNS. -# -# ssh -# - Will save /proc/vmcore to :/%HOST-%DATE/, -# supports DNS. -# NOTE: make sure the user has write permissions on the server. -# -# sshkey -# - Will use the sshkey to do ssh dump. -# Specify the path of the ssh key to use when dumping -# via ssh. The default value is /root/.ssh/kdump_id_rsa. -# -# -# - Will mount -t , and copy -# /proc/vmcore to //%HOST_IP-%DATE/. -# NOTE: can be a device node, label or uuid. -# It's recommended to use persistent device names -# such as /dev/vg/. -# Otherwise it's suggested to use label or uuid. -# -# path -# - "path" represents the file system path in which vmcore -# will be saved. If a dump target is specified in -# kdump.conf, then "path" is relative to the specified -# dump target. -# -# Interpretation of "path" changes a bit if the user didn't -# specify any dump target explicitly in kdump.conf. In this -# case, "path" represents the absolute path from root. The -# dump target and adjusted path are arrived at automatically -# depending on what's mounted in the current system. -# -# Ignored for raw device dumps. If unset, will use the default -# "/var/crash". -# -# core_collector -# - This allows you to specify the command to copy -# the vmcore. The default is makedumpfile, which on -# some architectures can drastically reduce vmcore size. -# See /sbin/makedumpfile --help for a list of options. -# Note that the -i and -g options are not needed here, -# as the initrd will automatically be populated with a -# config file appropriate for the running kernel. -# The default core_collector for raw/ssh dump is: -# "makedumpfile -F -l --message-level 7 -d 31". -# The default core_collector for other targets is: -# "makedumpfile -l --message-level 7 -d 31". -# -# "makedumpfile -F" will create a flattened vmcore. -# You need to use "makedumpfile -R" to rearrange the dump data to -# a normal dumpfile readable with analysis tools. For example: -# "makedumpfile -R vmcore < vmcore.flat". -# -# For core_collector format details, you can refer to -# kexec-kdump-howto.txt or kdump.conf manpage. -# -# kdump_post -# - This directive allows you to run a executable binary -# or script after the vmcore dump process terminates. -# The exit status of the current dump process is fed to -# the executable binary or script as its first argument. -# All files under /etc/kdump/post.d are collectively sorted -# and executed in lexical order, before binary or script -# specified kdump_post parameter is executed. -# -# kdump_pre -# - Works like the "kdump_post" directive, but instead of running -# after the dump process, runs immediately before it. -# Exit status of this binary is interpreted as follows: -# 0 - continue with dump process as usual -# non 0 - run the final action (reboot/poweroff/halt) -# All files under /etc/kdump/pre.d are collectively sorted and -# executed in lexical order, after binary or script specified -# kdump_pre parameter is executed. -# Even if the binary or script in /etc/kdump/pre.d directory -# returns non 0 exit status, the processing is continued. -# -# extra_bins -# - This directive allows you to specify additional binaries or -# shell scripts to be included in the kdump initrd. -# Generally they are useful in conjunction with a kdump_post -# or kdump_pre binary or script which depends on these extra_bins. -# -# extra_modules -# - This directive allows you to specify extra kernel modules -# that you want to be loaded in the kdump initrd. -# Multiple modules can be listed, separated by spaces, and any -# dependent modules will automatically be included. -# -# failure_action -# - Action to perform in case dumping fails. -# reboot: Reboot the system. -# halt: Halt the system. -# poweroff: Power down the system. -# shell: Drop to a bash shell. -# Exiting the shell reboots the system by default, -# or perform "final_action". -# dump_to_rootfs: Dump vmcore to rootfs from initramfs context and -# reboot by default or perform "final_action". -# Useful when non-root dump target is specified. -# The default option is "reboot". -# -# default -# - Same as the "failure_action" directive above, but this directive -# is obsolete and will be removed in the future. -# -# final_action -# - Action to perform in case dumping succeeds. Also performed -# when "shell" or "dump_to_rootfs" failure action finishes. -# Each action is same as the "failure_action" directive above. -# The default is "reboot". -# -# force_rebuild <0 | 1> -# - By default, kdump initrd will only be rebuilt when necessary. -# Specify 1 to force rebuilding kdump initrd every time when kdump -# service starts. -# -# force_no_rebuild <0 | 1> -# - By default, kdump initrd will be rebuilt when necessary. -# Specify 1 to bypass rebuilding of kdump initrd. -# -# force_no_rebuild and force_rebuild options are mutually -# exclusive and they should not be set to 1 simultaneously. -# -# override_resettable <0 | 1> -# - Usually an unresettable block device can't be a dump target. -# Specifying 1 when you want to dump even though the block -# target is unresettable -# By default, it is 0, which will not try dumping destined to fail. -# -# dracut_args -# - Pass extra dracut options when rebuilding kdump initrd. -# -# fence_kdump_args -# - Command line arguments for fence_kdump_send (it can contain -# all valid arguments except hosts to send notification to). -# -# fence_kdump_nodes -# - List of cluster node(s) except localhost, separated by spaces, -# to send fence_kdump notifications to. -# (this option is mandatory to enable fence_kdump). -# - -#raw /dev/vg/lv_kdump -#ext4 /dev/vg/lv_kdump -#ext4 LABEL=/boot -#ext4 UUID=03138356-5e61-4ab3-b58e-27507ac41937 -#nfs my.server.com:/export/tmp -#nfs [2001:db8::1:2:3:4]:/export/tmp -#ssh user@my.server.com -#ssh user@2001:db8::1:2:3:4 -#sshkey /root/.ssh/kdump_id_rsa -auto_reset_crashkernel yes -path /var/crash -core_collector makedumpfile -l --message-level 7 -d 31 -#core_collector scp -#kdump_post /var/crash/scripts/kdump-post.sh -#kdump_pre /var/crash/scripts/kdump-pre.sh -#extra_bins /usr/bin/lftp -#extra_modules gfs2 -#failure_action shell -#force_rebuild 1 -#force_no_rebuild 1 -#dracut_args --omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3" -#fence_kdump_args -p 7410 -f auto -c 0 -i 10 -#fence_kdump_nodes node1 node2 diff --git a/kdump.conf.5 b/kdump.conf.5 deleted file mode 100644 index e3e9900..0000000 --- a/kdump.conf.5 +++ /dev/null @@ -1,387 +0,0 @@ -.TH KDUMP.CONF 5 "07/23/2008" "kexec-tools" - -.SH NAME -kdump.conf \- configuration file for kdump kernel. - -.SH DESCRIPTION - -kdump.conf is a configuration file for the kdump kernel crash -collection service. - -kdump.conf provides post-kexec instructions to the kdump kernel. It is -stored in the initrd file managed by the kdump service. If you change -this file and do not want to reboot in order for the changes to take -effect, restart the kdump service to rebuild the initrd. - -For most configurations, you can simply review the examples provided -in the stock /etc/kdump.conf. - -.B NOTE: -For filesystem dumps the dump target must be mounted before building -kdump initramfs. - -kdump.conf only affects the behavior of the initramfs. Please read the -kdump operational flow section of kexec-kdump-howto.txt in the docs to better -understand how this configuration file affects the behavior of kdump. - -.SH OPTIONS - -.B auto_reset_crashkernel -.RS -determine whether to reset kernel crashkernel to new default value -or not when kexec-tools updates the default crashkernel value and -existing kernels using the old default kernel crashkernel value - -.B raw -.RS -Will dd /proc/vmcore into . Use persistent device names for -partition devices, such as /dev/vg/. -.RE - -.B nfs -.RS -Will mount nfs to , and copy /proc/vmcore to //%HOST-%DATE/, -supports DNS. Note that a fqdn should be used as the server name in the -mount point. -.RE - -.B ssh -.RS -Will save /proc/vmcore through ssh pipe to :/%HOST-%DATE/, -supports DNS. NOTE: make sure user has necessary write permissions on -server and that a fqdn is used as the server name. -.RE - -.B sshkey -.RS -Specify the path of the ssh key to use when dumping via ssh. -The default value is /root/.ssh/kdump_id_rsa. -.RE - -.B -.RS -Will mount -t , and copy /proc/vmcore to -//%HOST_IP-%DATE/. NOTE: can be a device node, label -or uuid. It's recommended to use persistent device names such as -/dev/vg/. Otherwise it's suggested to use label or uuid. -.RE - -.B path -.RS -"path" represents the file system path in which vmcore will be saved. -If a dump target is specified in kdump.conf, then "path" is relative to the -specified dump target. -.PP -Interpretation of "path" changes a bit if the user didn't specify any dump -target explicitly in kdump.conf. In this case, "path" represents the -absolute path from root. The dump target and adjusted path are arrived -at automatically depending on what's mounted in the current system. -.PP -Ignored for raw device dumps. If unset, will use the default "/var/crash". -.RE - -.B core_collector -.RS -This allows you to specify the command to copy the vmcore. -The default is makedumpfile, which on some architectures can drastically reduce -core file size. See /sbin/makedumpfile --help for a list of options. -Note that the -i and -g options are not needed here, as the initrd -will automatically be populated with a config file appropriate -for the running kernel. -.PP -Note 1: About default core collector: -The default core_collector for raw/ssh dump is: -"makedumpfile -F -l --message-level 7 -d 31". -The default core_collector for other targets is: -"makedumpfile -l --message-level 7 -d 31". -Even if core_collector option is commented out in kdump.conf, makedumpfile -is the default core collector and kdump uses it internally. -If one does not want makedumpfile as default core_collector, then they -need to specify one using core_collector option to change the behavior. -.PP -Note 2: If "makedumpfile -F" is used then you will get a flattened format -vmcore.flat, you will need to use "makedumpfile -R" to rearrange the -dump data from standard input to a normal dumpfile (readable with analysis -tools). -ie. "makedumpfile -R vmcore < vmcore.flat" -.PP -Note 3: If specified core_collector simply copy the vmcore file to the -dump target (eg: cp, scp), the vmcore could be significantly large. -Please make sure the dump target has enough space, at leaset larger -than the system's RAM. - -.RE - -.B kdump_post -.RS -This directive allows you to run a specified executable -just after the vmcore dump process terminates. The exit -status of the current dump process is fed to the kdump_post -executable as its first argument($1). Executable can modify -it to indicate the new exit status of succeeding dump process, -.PP -All files under /etc/kdump/post.d are collectively sorted -and executed in lexical order, before binary or script -specified kdump_post parameter is executed. -.PP -Note that scripts written for use with this directive must use the /bin/bash -interpreter. And since these scripts run in kdump enviroment, the reference to -the storage or network device in the scripts should adhere to the section -'Supported dump target types and requirements' in kexec-kdump-howto.txt. - -.RE - -.B kdump_pre -.RS -Works just like the "kdump_post" directive, but instead -of running after the dump process, runs immediately -before. Exit status of this binary is interpreted -as follows: -.PP -0 - continue with dump process as usual -.PP -non 0 - run the final action (reboot/poweroff/halt) -.PP -All files under /etc/kdump/pre.d are collectively sorted and -executed in lexical order, after binary or script specified -kdump_pre parameter is executed. -Even if the binary or script in /etc/kdump/pre.d directory -returns non 0 exit status, the processing is continued. -.PP -Note that scripts written for use with this directive must use the /bin/bash -interpreter. And since these scripts run in kdump enviroment, the reference to -the storage or network device in the scripts should adhere to the section -'Supported dump target types and requirements' in kexec-kdump-howto.txt. - -.RE - -.B extra_bins -.RS -This directive allows you to specify additional -binaries or shell scripts you'd like to include in -your kdump initrd. Generally only useful in -conjunction with a kdump_post binary or script that -relies on other binaries or scripts. -.RE - -.B extra_modules -.RS -This directive allows you to specify extra kernel -modules that you want to be loaded in the kdump -initrd, typically used to set up access to -non-boot-path dump targets that might otherwise -not be accessible in the kdump environment. Multiple -modules can be listed, separated by spaces, and any -dependent modules will automatically be included. -.RE - -.B failure_action -.RS -Action to perform in case dumping to the intended target fails. The default is "reboot". -reboot: Reboot the system (this is what most people will want, as it returns the system -to a normal state). halt: Halt the system and lose the vmcore. poweroff: The system -will be powered down. shell: Drop to a shell session inside the initramfs, from which -you can manually perform additional recovery actions. Exiting this shell reboots the -system by default or performs "final_action". -Note: kdump uses bash as the default shell. dump_to_rootfs: If non-root dump -target is specified, the failure action can be set as dump_to_rootfs. That means when -dumping to target fails, dump vmcore to rootfs from initramfs context and reboot -by default or perform "final_action". -.RE - -.B default -.RS -Same as the "failure_action" directive above, but this directive is obsolete -and will be removed in the future. -.RE - -.B final_action -.RS -Action to perform in case dumping to the intended target succeeds. -Also performed when "shell" or "dump_to_rootfs" failure action finishes. -Each action is same as the "failure_action" directive above. -The default is "reboot". -.RE - -.B force_rebuild <0 | 1> -.RS -By default, kdump initrd will only be rebuilt when necessary. -Specify 1 to force rebuilding kdump initrd every time when kdump service starts. -.RE - -.B force_no_rebuild <0 | 1> -.RS -By default, kdump initrd will be rebuilt when necessary. -Specify 1 to bypass rebuilding of kdump initrd. - -.PP -force_no_rebuild and force_rebuild options are mutually exclusive and -they should not be set to 1 simultaneously. -.RE - -.B override_resettable <0 | 1> -.RS -Usually an unresettable block device can't be a dump target. Specifying 1 means -that even though the block target is unresettable, the user wants to try dumping anyway. -By default, it's set to 0, which will not try something destined to fail. -.RE - - -.B dracut_args -.RS -Kdump uses dracut to generate initramfs for second kernel. This option -allows a user to pass arguments to dracut directly. -.RE - - -.B fence_kdump_args -.RS -Command line arguments for fence_kdump_send (it can contain all valid -arguments except hosts to send notification to). -.RE - - -.B fence_kdump_nodes -.RS -List of cluster node(s) except localhost, separated by spaces, to send fence_kdump notification -to (this option is mandatory to enable fence_kdump). -.RE - - -.SH DEPRECATED OPTIONS - -.B net | -.RS -net option is replaced by nfs and ssh options. Use nfs or ssh options -directly. -.RE - -.B options