Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild

After https://fedoraproject.org/wiki/Changes/RPMSuportForSystemdSysusers,
rpm will handle account creation automatically.

.cvsignore

@@ -1 +0,0 @@
-lcdproc-0.5.2.tar.gz

.gitignore

@@ -0,0 +1,7 @@
+lcdproc-0.5.2.tar.gz
+lcdproc-0.5.3.tar.gz
+/lcdproc-0.5.4.tar.gz
+/lcdproc-0.5.6.tar.gz
+/lcdproc-0.5.7.tar.gz
+/lcdproc-781b311.tar.gz
+/lcdproc-5c21e8c.tar.gz

0001-server-drivers-g15-Add-support-for-the-LCD-on-Logite.patch

@@ -0,0 +1,33 @@
+From 1c6be22c5eeea9a7f83192153b282b6002b89923 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 12 Apr 2021 22:44:06 +0200
+Subject: [PATCH] server/drivers/g15: Add support for the LCD on Logitech Z-10
+ speakers
+
+The LCD on Logitech Z-10 speakers uses the exact same protocol as on
+the g15 keyboards, add the USB-id + HID-descriptor header of the
+USB-intf. for the LCD.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ server/drivers/g15.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/server/drivers/g15.c b/server/drivers/g15.c
+index 154e253..48f5fe5 100644
+--- a/server/drivers/g15.c
++++ b/server/drivers/g15.c
+@@ -90,6 +90,10 @@ static const struct lib_hidraw_id hidraw_ids[] = {
+ 	{ { BUS_USB, 0x046d, 0xc22e },
+ 	  { 0x05, 0x0c, 0x09, 0x01, 0xa1, 0x01, 0x85, 0x02,
+ 	    0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, 0x07 } },
++	/* Z-10 */
++	{ { BUS_USB, 0x046d, 0x0a07 },
++	  { 0x06, 0x00, 0xff, 0x09, 0x00, 0xa1, 0x01, 0x15,
++	    0x00, 0x26, 0xff, 0x00, 0x75, 0x08, 0x95, 0x08 } },
+ 	/* Terminator */
+ 	{}
+ };
+-- 
+2.31.1
+

90-lcdproc.rules

@@ -0,0 +1,57 @@
+# lcdproc udev rules
+
+ACTION!="add", GOTO="lcdproc_end"
+
+### 1. Check for USB LCD panels which we access directly through libusb ###
+
+# Till Harbaum's LCD2USB device
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c630", GOTO="lcdproc_lcd_found"
+
+### 2. Check for HID LCD panels accessed through their hidraw device ###
+
+# Logitech MX5000 keyboard Bluetooth and USB (BT receiver as HID-proxy) modes
+DEVPATH=="*/0003:046D:B305.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+DEVPATH=="*/0005:046D:B305.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+
+# Logitech MX5500 keyboard Bluetooth and USB (BT receiver as HID-proxy) modes
+DEVPATH=="*/0003:046D:B30B.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+DEVPATH=="*/0005:046D:B30B.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+
+# Logitech G15 gaming keyboard
+DEVPATH=="*/0003:046D:C222.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+
+# Logitech G15 v2 gaming keyboard
+DEVPATH=="*/0003:046D:C227.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
+
+# Logitech G510 gaming keyboard, note we only want interface 1
+DEVPATH=="*/0003:046D:C22D.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="01", GOTO="lcdproc_lcd_found"
+DEVPATH=="*/0003:046D:C22E.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="01", GOTO="lcdproc_lcd_found"
+
+# Logitech Z-10 speakers with G15 style LCD screen, note we only want interface 2
+DEVPATH=="*/0003:046D:0A07.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="02", GOTO="lcdproc_lcd_found"
+
+### 3. Check for input devices for LCD menu buttons ###
+
+# Logitech G15, G15 v2 and G510 Gaming and LCD menu keys
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Gaming Keyboard Gaming Keys", GOTO="lcdproc_input_found"
+# Logitech MX5000 keyboard connected over Bluetooth
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech MX5000 Keyboard", GOTO="lcdproc_input_found"
+# Logitech MX5000 keyboard connected through its receiver in USB HID proxy mode
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Wireless Keyboard PID:b305", GOTO="lcdproc_input_found"
+# Logitech Z-10 speakers LCD menu keys
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Z-10 LCD Menu Keys", GOTO="lcdproc_input_found"
+
+
+### Nothing found, leave ###
+GOTO="lcdproc_end"
+
+
+LABEL="lcdproc_lcd_found"
+TAG+="systemd"
+ENV{SYSTEMD_WANTS}+="lcdproc.target"
+
+LABEL="lcdproc_input_found"
+# Grant rw permission to the lcdd group using acl(5), for both LCD and input devs
+RUN+="/usr/bin/sh -c '/usr/bin/setfacl -m g:lcdd:rw %E{DEVNAME} 2>/dev/null || :'"
+
+LABEL="lcdproc_end"

LCDd-hwdetect.service

@@ -0,0 +1,9 @@
+[Unit]
+Description=LCDd hardware detection Service
+After=syslog.target
+Before=LCDd.service
+ConditionPathExists=!/etc/lcdproc/LCDd.conf
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/LCDd-hwdetect

LCDd-hwdetect.sh

@@ -0,0 +1,179 @@
+#!/bin/bash
+
+lcd_device=""
+extra_lcd_devices=""
+lcd_driver=""
+input_name=""
+
+add_device () {
+  if [ -z "$lcd_device" ]; then
+    lcd_device="$1"
+    lcd_driver="$2"
+    input_name="$3"
+  elif [ "$1" != "$lcd_device" ]; then
+    extra_lcd_devices="$extra_lcd_devices $1"
+  fi
+}
+
+if [ -f /etc/lcdproc/LCDd.conf ]; then
+   echo "/etc/lcdproc/LCDd.conf already exists"
+   echo "If you want LCDd-hwdetect to create a new config move it out of the way"
+   exit 1
+fi
+
+# USB devices where we use raw USB access (through libusb)
+if [ -d /sys/bus/hid/devices ]; then
+  for i in $(cat /sys/bus/usb/devices/*/modalias); do
+    case "$i" in
+      usb:v0403pC630d*)
+        add_device "lcd2usb" "hd44780"
+        ;;
+    esac
+  done
+fi
+
+# HID devices
+if [ -d /sys/bus/hid/devices ]; then
+  pushd /sys/bus/hid/devices > /dev/null
+    for i in $(ls); do
+      case "$i" in
+        # Logitech MX5000 connected through its receiver in USB HID proxy mode
+        0003:046D:B305.*)
+          add_device "mx5000" "mx5000" "Logitech Wireless Keyboard PID:b305"
+          ;;
+        # Logitech MX5000 connected over bluetooth
+        0005:046D:B305.*)
+          add_device "mx5000" "mx5000" "Logitech MX5000 Keyboard"
+          ;;
+        # Logitech MX5500 connected through its receiver in USB HID proxy mode
+        # Note the MX5500's LCD menu buttons are not accessible by the host
+        0003:046D:B30B.*)
+          add_device "mx5500" "mx5000"
+          ;;
+        # Logitech MX5500 connected over bluetooth, no usable LCD menu btns
+        0005:046D:B30B.*)
+          add_device "mx5500" "mx5000"
+          ;;
+        # Logitech G15
+        0003:046D:C222.*)
+          add_device "g15"    "g15" "Logitech Gaming Keyboard Gaming Keys"
+          ;;
+        # Logitech G15 v2
+        0003:046D:C227.*)
+          add_device "g15-v2" "g15" "Logitech Gaming Keyboard Gaming Keys"
+          ;;
+        # Logitech G510 without a headset plugged in, without USB audio intf.
+        0003:046D:C22D.*)
+          add_device "g510"   "g15" "Logitech Gaming Keyboard Gaming Keys"
+          ;;
+        # Logitech G510 with a headset plugged, with extra USB audio intf.
+        0003:046D:C22E.*)
+          add_device "g510"   "g15" "Logitech Gaming Keyboard Gaming Keys"
+          ;;
+        # Logitech Z10 speakers
+        0003:046D:0A07.*)
+          add_device "z-10"   "g15" "Logitech Z-10 LCD Menu Keys"
+          ;;
+      esac
+    done
+  popd > /dev/null
+fi
+
+if [ -z "$lcd_device" ]; then
+  echo "No known LCD devices detected"
+  exit 1
+fi
+
+echo "Detected $lcd_device LCD device"
+if [ -n "$extra_lcd_devices" ]; then
+  echo "Detected extra LCD devices:$extra_lcd_devices"
+  echo "Multiple devices are not supported, these extra LCD devices will be ignored"
+fi
+
+# Write LCDd.conf for the found device, also:
+# Disable the server screen in the rotation of screens
+# Disable the annoying blinking heartbeat by default
+# Disable title scrolling (set the speed to 0) most keyboard LCDs have
+#  a low refresh rate making the scrolling look terrible
+cat /etc/lcdproc/LCDd.conf.example | \
+  sed -e "s/^Driver=curses/Driver=$lcd_driver/" \
+      -e "s/#ServerScreen=no/ServerScreen=no/" \
+      -e "s/#Heartbeat=open/Heartbeat=off/" \
+      -e "s/#TitleSpeed=10/TitleSpeed=0/" > \
+  /etc/lcdproc/LCDd.conf
+
+# Add input-device config if specified
+# Also set prev / next screen to up/down since non of the supported devices
+# has enough buttons to create mappings for both left and right
+# And uncomment the LeftKey and RightKey assignments so that they work
+# when they are available
+if [ "$input_name" ]; then
+  sed -i -e "s|Driver=$lcd_driver|Driver=$lcd_driver\nDriver=linux_input|" \
+         -e "s|PrevScreenKey=Left|PrevScreenKey=Up|" \
+         -e "s|NextScreenKey=Right|NextScreenKey=Down|" \
+         -e "s|# Device=/dev/input/event0|Device=\"$input_name\"|" \
+         -e "s|#LeftKey=Left|LeftKey=Left|" \
+         -e "s|#RightKey=Right|RightKey=Right|" \
+    /etc/lcdproc/LCDd.conf
+fi
+
+# Device specific config bits
+case "$lcd_device" in
+  "lcd2usb")
+    # This assume a 16x2 display as the lcd2usb board is typically sold with
+    # this display on aliexpress / banggood.   There are only 2 buttons making
+    # menu navigation impossible. We map button 1 to toggling auto-rotate on/off
+    # and button 2 to manually switching to the next screen
+    sed -i -e 's/ConnectionType=4bit/ConnectionType=lcd2usb/' \
+           -e 's/Keypad=no/Keypad=yes/' \
+           -e 's/#Contrast=0/Contrast=600/' \
+           -e 's/Size=20x4/Size=16x2/g' \
+           -e 's/KeyMatrix_4_1=Enter/# Button config for lcd2usb, not enough buttons for menu navigation/' \
+           -e 's/KeyMatrix_4_2=Up/# so we only do screen rotation control/' \
+           -e 's/KeyMatrix_4_3=Down/KeyDirect_1=Enter/' \
+           -e 's/KeyMatrix_4_4=Escape/KeyDirect_2=Right/' \
+      /etc/lcdproc/LCDd.conf
+    ;;
+  "g15"|"g15-2"|"g510"|"z-10")
+    sed -i -e "s/# specify a non-default key map/# Keymap for the G15's 5 LCD-menu buttons/" \
+           -e 's/#key=1,Escape/key=0x2b8,Escape/' \
+           -e 's/#key=28,Enter/key=0x2b9,Left/' \
+           -e 's/#key=96,Enter/key=0x2ba,Up/' \
+           -e 's/#key=105,Left/key=0x2bb,Down/' \
+           -e 's/#key=106,Right/key=0x2bc,Enter/' \
+           -e 's/#key=103,Up//' \
+           -e 's/#key=108,Down//' \
+      /etc/lcdproc/LCDd.conf
+    ;;
+  "mx5000")
+    sed -i -e "s/# specify a non-default key map/# Keymap for the MX5000's 4 LCD-menu buttons/" \
+           -e 's/#key=1,Escape/key=0x2b8,Escape/' \
+           -e 's/#key=28,Enter/key=0x2b9,Up/' \
+           -e 's/#key=96,Enter/key=0x2ba,Down/' \
+           -e 's/#key=105,Left/key=0x2bb,Enter/' \
+           -e 's/#key=106,Right//' \
+           -e 's/#key=103,Up//' \
+           -e 's/#key=108,Down//' \
+      /etc/lcdproc/LCDd.conf
+    ;;
+esac
+
+echo "Wrote /etc/lcdproc/LCDd.conf for $lcd_device using $lcd_driver driver"
+
+# If there is no lcdproc.conf, generate one from the example file
+if [ -f /etc/lcdproc/lcdproc.conf ]; then
+  exit 0
+fi
+  
+install -p -m 644 /etc/lcdproc/lcdproc.conf.example /etc/lcdproc/lcdproc.conf
+
+# Device specific config bits
+case "$lcd_device" in
+  "mx5000"|"mx5500")
+    # The mx5000 and mx5500 do not do vertical-bars, disable load screen 
+    sed -i -e '73s/Active=True/Active=false/' \
+      /etc/lcdproc/lcdproc.conf
+    ;;
+esac
+
+echo "Wrote /etc/lcdproc/lcdproc.conf"

LCDd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=LCDd Service
+After=syslog.target
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/LCDd -c /etc/lcdproc/LCDd.conf
+User=root
+Group=lcdd
+
+[Install]
+WantedBy=multi-user.target

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: lcdproc
-# $Id$
-NAME := lcdproc
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attept a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

lcdproc-0.5.2-initscripts.patch

@@ -1,139 +0,0 @@
-diff -up lcdproc-0.5.2/scripts/init-lcdproc.LSB.in.initscripts lcdproc-0.5.2/scripts/init-lcdproc.LSB.in
---- lcdproc-0.5.2/scripts/init-lcdproc.LSB.in.initscripts	2007-04-14 16:41:20.000000000 +0200
-+++ lcdproc-0.5.2/scripts/init-lcdproc.LSB.in	2008-07-08 16:32:30.000000000 +0200
-@@ -4,6 +4,7 @@
- # Provides:          lcdproc
- # Required-Start:    $syslog $local_fs $network $remote_fs
- # Required-Stop:     $syslog $local_fs $network $remote_fs
-+# Should-Start:      LCDd
- # Default-Start:     2 3 4 5
- # Default-Stop:      S 0 1 6
- # Short-Description: LCDproc system status information viewer
-@@ -23,8 +24,9 @@ PATH=/sbin:/bin:/usr/sbin:/usr/bin
- NAME=lcdproc
- DAEMON=${bindir}/$NAME
- DESC="LCDproc system status monitor"
--DEFAULTS=/etc/default/$NAME
-+DEFAULTS=@sysconfdir@/${NAME}
- START=yes
-+RETVAL=0
- 
- # Source defaults file; edit that file to configure this script.
- if [ -e "${DEFAULTS}" ]; then
-@@ -40,29 +42,39 @@ fi
- test -x $DAEMON || exit 5
- 
- # load LSB 3.x init functions
--. /lib/lsb/init-functions
-+if [ -e /lib/lsb/init-functions ]; then
-+  . /lib/lsb/init-functions
-+fi
-+
-+# Source function library.
-+if [ -e /etc/rc.d/init.d/functions ]; then
-+  . /etc/rc.d/init.d/functions
-+fi
- 
- 
- case "$1" in
-   start)
--	log_daemon_msg "Starting $DESC" "$NAME"
-+	echo -n $"Starting $DESC $NAME :"
- 	start_daemon $DAEMON $OPTIONS
--	log_end_msg $?
-+	RETVAL=$?
-+        echo
- 	;;
-   stop)
--	log_daemon_msg "Stopping $DESC" "$NAME"
-+	echo -n $"Stopping $DESC $NAME :"
- 	killproc $DAEMON
--	log_end_msg $?
-+	RETVAL=$?
-+        echo
- 	;;
-   restart|reload|force-reload)
- 	$0 stop
- 	sleep 1
-+        RETVAL=0
- 	$0 start
- 	;;
-   *)
--	echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
-+	echo $"Usage: $0 {start|stop|restart|reload|force-reload}" >&2
- 	exit 2
- 	;;
- esac
- 
--exit 0
-+exit $RETVAL
-diff -up lcdproc-0.5.2/scripts/init-LCDd.LSB.in.initscripts lcdproc-0.5.2/scripts/init-LCDd.LSB.in
---- lcdproc-0.5.2/scripts/init-LCDd.LSB.in.initscripts	2007-04-14 16:41:20.000000000 +0200
-+++ lcdproc-0.5.2/scripts/init-LCDd.LSB.in	2008-07-08 16:32:22.000000000 +0200
-@@ -4,6 +4,7 @@
- # Provides:          LCDd
- # Required-Start:    $syslog $local_fs $network $remote_fs
- # Required-Stop:     $syslog $local_fs $network $remote_fs
-+# Should-Start:      udev
- # Default-Start:     2 3 4 5
- # Default-Stop:      S 0 1 6
- # Short-Description: LCDproc Server Daemon
-@@ -23,8 +24,10 @@ PATH=/sbin:/bin:/usr/sbin:/usr/bin
- NAME=LCDd
- DAEMON=${sbindir}/$NAME
- DESC="LCDproc display server daemon"
--DEFAULTS=/etc/default/$NAME
-+DEFAULTS=@sysconfdir@/${NAME}
- START=yes
-+RETVAL=0
-+
- 
- # Source defaults file; edit that file to configure this script.
- if [ -e "${DEFAULTS}" ]; then
-@@ -40,29 +43,39 @@ fi
- test -x $DAEMON || exit 5
- 
- # load LSB 3.x init functions
--. /lib/lsb/init-functions
-+if [ -e /lib/lsb/init-functions ]; then
-+  . /lib/lsb/init-functions
-+fi
-+
-+# Source function library.
-+if [ -e /etc/rc.d/init.d/functions ]; then
-+  . /etc/rc.d/init.d/functions
-+fi
- 
- 
- case "$1" in
-   start)
--	log_daemon_msg "Starting $DESC" "$NAME"
-+	echo -n $"Starting $DESC $NAME :"
- 	start_daemon $DAEMON $OPTIONS
--	log_end_msg $?
-+	RETVAL=$?
-+        echo
- 	;;
-   stop)
--	log_daemon_msg "Stopping $DESC" "$NAME"
-+	echo -n $"Stopping $DESC $NAME :"
- 	killproc $DAEMON
--	log_end_msg $?
-+	RETVAL=$?
-+        echo
- 	;;
-   restart|reload|force-reload)
- 	$0 stop
- 	sleep 1
-+        RETVAL=0
- 	$0 start
- 	;;
-   *)
--	echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
-+	echo $"Usage: $0 {start|stop|restart|reload|force-reload}" >&2
- 	exit 2
- 	;;
- esac
- 
--exit 0
-+exit $RETVAL

lcdproc-0.5.2-memset_swp.patch

@@ -1,20 +0,0 @@
---- lcdproc-0.5.2/server/drivers/pylcd.c.memset_swp	2007-08-12 19:27:34.000000000 +0200
-+++ lcdproc-0.5.2/server/drivers/pylcd.c	2007-08-12 19:42:05.000000000 +0200
-@@ -118,7 +118,7 @@
- 
-     if (zeichen!=0x02)
-     {
--        memset(buffer, MAXCOUNT, 0);
-+        memset(buffer, 0, MAXCOUNT);
-         return False;
-     }
- 
-@@ -146,7 +146,7 @@
-     }
-     else
-     {
--        memset(buffer, MAXCOUNT, 0);
-+        memset(buffer, 0, MAXCOUNT);
-         return False;
-     }
- }

lcdproc-conf.patch

@@ -0,0 +1,30 @@
+diff -up lcdproc-0.5.7/clients/lcdproc/lcdproc.conf~ lcdproc-0.5.7/clients/lcdproc/lcdproc.conf
+--- lcdproc-0.5.7/clients/lcdproc/lcdproc.conf~	2014-03-23 11:22:07.000000000 +0100
++++ lcdproc-0.5.7/clients/lcdproc/lcdproc.conf	2019-06-02 12:44:40.366733461 +0200
+@@ -39,7 +39,7 @@ ShowInvisible=false
+ 
+ [Iface]
+ # Show screen
+-Active=True
++Active=false
+ 
+ # Show stats for Interface0
+ Interface0=eth0
+@@ -79,7 +79,7 @@ HighLoad=1.3
+ 
+ [TimeDate]
+ # Show screen
+-Active=True
++Active=false
+ # time format [default: %H:%M:%S; legal: see strftime(3)]
+ TimeFormat="%H:%M:%S"
+ # date format [default: %x; legal: see strftime(3)]
+@@ -130,7 +130,7 @@ Active=false
+ 
+ [ProcSize]
+ # Show screen
+-Active=false
++Active=True
+ 
+ 
+ [Disk]

lcdproc.rpmlintrc

@@ -0,0 +1,3 @@
+addFilter("conffile-without-noreplace-flag")
+addFilter("no-manual-page-for-binary")
+addFilter("incorrect-fsf-address")

lcdproc.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=lcdproc Service
+After=syslog.target LCDd.service
+
+[Service]
+Type=forking
+PIDFile=/run/lcdproc.pid
+ExecStart=/usr/bin/lcdproc -c /etc/lcdproc/lcdproc.conf
+
+[Install]
+WantedBy=multi-user.target

lcdproc.spec

@@ -1,135 +1,390 @@
-Summary:        LCDproc displays real-time system information on a 20x4 backlit LCD
+%global commit 5c21e8c75fbab53574275c8007f5af746e333144
-Name:           lcdproc	
+%global commitdate 20210209
-Version:        0.5.2
+%global shortcommit %(c=%{commit}; echo ${c:0:7})
-Release:        6%{?dist}
-License:        GPLv2
-URL:            http://lcdproc.omnipotent.net
-Group:          System Environment/Libraries	
-Source0:        http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz
-Patch0:         lcdproc-0.5.2-initscripts.patch
-Patch1:         lcdproc-0.5.2-memset_swp.patch
-BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 
+Summary:        Display real-time system information on a 20x4 back-lit LCD
+Name:           lcdproc
+Version:        0.5.9
+Release:        26.%{commitdate}git%{shortcommit}%{?dist}
+# Automatically converted from old format: GPLv2 - review is highly recommended.
+License:        GPL-2.0-only
+URL:            http://lcdproc.org
+Source0:        https://github.com/%{name}/%{name}/archive/%{commit}/%{name}-%{shortcommit}.tar.gz
+Source1:        lcdproc.service
+Source2:        lcdproc.target
+Source3:        LCDd.service
+Source4:        LCDd-hwdetect.service
+Source5:        LCDd-hwdetect.sh
+Source6:        90-lcdproc.rules
+Source7:        lcdproc.sysusers
+Patch1:         0001-server-drivers-g15-Add-support-for-the-LCD-on-Logite.patch
+# lcdconf.conf tweaks:
+# 1. Enable ProcSize, this is quite useful to have
+# 2. Disable TimeDate, its info is duplicate with the MiniClock and it is ugly
+# 3. Disable network interface screen by default, since Fedora uses predictable
+#    network interface names, having a simple default like Interface0=eth0 does
+#    not work
+Patch99:        lcdproc-conf.patch
+
+BuildRequires:  perl-generators
+BuildRequires:  systemd-rpm-macros
 BuildRequires:  doxygen
 BuildRequires:  graphviz
 
-BuildRequires:  glibc-headers
+BuildRequires:  freetype-devel
-BuildRequires:  libusb-devel
+%ifnarch s390 s390x
+BuildRequires:  libhid-devel
+%endif
+BuildRequires:  libusb1-devel
 BuildRequires:  lirc-devel
 BuildRequires:  ncurses-devel
-BuildRequires:  nfs-utils-lib-devel
 BuildRequires:  openldap-devel
-BuildRequires:  pth-devel
 BuildRequires:  xmlto
-%if 0%{?fedora} > 9
 BuildRequires:  docbook-dtds
-%endif
-BuildRequires:  xosd-devel
 BuildRequires:  libX11-devel
 BuildRequires:  libXext-devel
+BuildRequires:  libftdi-devel
+BuildRequires:  libg15render-devel
+BuildRequires:  mx5000tools-devel
+BuildRequires:  libtool autoconf automake
+BuildRequires:  gcc make
 
-%ifarch %{ix86} x86_64
+%{?systemd_requires}
-BuildRequires:  svgalib-devel
-%endif
-
-Requires(post):  /sbin/chkconfig
-Requires(postun):  /sbin/chkconfig
 
 
 
 %description
-LCDproc is a client/server suite inclduding drivers for all
+LCDproc is a client/server suite including drivers for all
 kinds of nifty LCD displays. The server supports several
-serial devices: Matrix Orbital, Crystal Fontz, Bayrad, LB216, 
+serial devices: Matrix Orbital, Crystal Fontz, Bayrad, LB216,
-LCDM001 (kernelconcepts.de), Wirz-SLI and PIC-an-LCD; and some 
+LCDM001 (http://kernelconcepts.de), Wirz-SLI and PIC-an-LCD; and some
-devices connected to the LPT port: HD44780, STV5730, T6963, 
+devices connected to the LPT port: HD44780, STV5730, T6963,
-SED1520 and SED1330. Various clients are available that display 
+SED1520 and SED1330. Various clients are available that display
-things like CPU load, system load, memory usage, uptime, and a lot more. 
+things like CPU load, system load, memory usage, up-time, and a lot more.
-See also http://lcdproc.omnipotent.net. 
+See also http://lcdproc.omnipotent.net.
 
 
 %prep
-%setup -q
+%autosetup -p1 -n %{name}-%{commit}
-%patch0 -p1 -b .initscripts
+# Fixup DriverPath
-%patch1 -p1 -b .memset_swp
-chmod 644 server/drivers/timing.h
-
 sed -i -e 's|server/drivers|%{_libdir}/lcdproc|' LCDd.conf
 touch -r TODO LCDd.conf
 
+
 %build
+# This package has a configure test which uses ASMs, but does not link the
+# resultant .o files.  As such the ASM test is always successful in a LTO
+# build.  We can force code generation with the -ffat-lto-objects to make
+# the test work as expected.
+#
+# -ffat-lto-objects is the default for F33, but will not be for F34, so we
+# make it explicit here.
+%define _lto_cflags -flto=auto -ffat-lto-objects
+
+autoreconf -vif
 %configure \
-  --sysconfdir=%{_sysconfdir}/sysconfig/%{name} \
+  --sysconfdir=%{_sysconfdir}/%{name} \
   --enable-libusb \
-  --enable-ldap \
   --enable-drivers=all \
-  --enable-permissive-menu-goto \
   --enable-lcdproc-menus \
   --enable-stat-nfs \
   --enable-stat-smbfs \
-  --with-lcdport=13666
+  --with-lcdport=13666 \
-
+  --with-pidfile-dir=/run
-sed -i -e 's|-L/usr/lib|-L%{_libdir}|g' Makefile
+%make_build
-  
-make CFLAGS="$RPM_OPT_FLAGS" %{?_smp_mflags}
 
 
 %install
-rm -rf $RPM_BUILD_ROOT __doc
+%make_install INSTALL="install -p"
-make install DESTDIR=$RPM_BUILD_ROOT
+# remove non useful (and not "lcd" prefixed) perl example scripts
-make install-html-guides DESTDIR=$RPM_BUILD_ROOT
+rm $RPM_BUILD_ROOT%{_bindir}/fortune.pl
+rm $RPM_BUILD_ROOT%{_bindir}/iosock.pl
+rm $RPM_BUILD_ROOT%{_bindir}/tail.pl
+rm $RPM_BUILD_ROOT%{_bindir}/x11amp.pl
 
-# Fix docs
+# docs
-mkdir -p __doc/developer-guide
+make install-html-guides DESTDIR=$RPM_BUILD_ROOT INSTALL="install -p"
-mkdir -p __doc/user-guide
+rm $RPM_BUILD_ROOT%{_docdir}/%{name}/*-guide/*.proc
-install -m 0644 $RPM_BUILD_ROOT%{_datadir}/doc/lcdproc/user-guide/*  __doc/user-guide
+install -pm 0644 CREDITS.md ChangeLog.md README.md \
-install -m 0644 $RPM_BUILD_ROOT%{_datadir}/doc/lcdproc/developer-guide/*  __doc/developer-guide
+  $RPM_BUILD_ROOT%{_docdir}/%{name}
-rm -rf $RPM_BUILD_ROOT%{_datadir}/doc
 
 # init
-install -d $RPM_BUILD_ROOT%{_initrddir}
+install -d $RPM_BUILD_ROOT%{_unitdir}
-install -pm 0755 scripts/init-LCDd.LSB  $RPM_BUILD_ROOT%{_initrddir}/LCDd
+install -d $RPM_BUILD_ROOT%{_unitdir}/lcdproc.target.wants
-install -pm 0755 scripts/init-lcdproc.LSB  $RPM_BUILD_ROOT%{_initrddir}/lcdproc
+install -d $RPM_BUILD_ROOT%{_udevrulesdir}
+install -d $RPM_BUILD_ROOT%{_sysusersdir}
+install -pm 0644 %{SOURCE1}  $RPM_BUILD_ROOT%{_unitdir}
+install -pm 0644 %{SOURCE2}  $RPM_BUILD_ROOT%{_unitdir}
+install -pm 0644 %{SOURCE3}  $RPM_BUILD_ROOT%{_unitdir}
+install -pm 0644 %{SOURCE4}  $RPM_BUILD_ROOT%{_unitdir}
+install -pm 0755 %{SOURCE5}  $RPM_BUILD_ROOT%{_sbindir}/LCDd-hwdetect
+install -pm 0644 %{SOURCE6}  $RPM_BUILD_ROOT%{_udevrulesdir}
+install -pm 0644 %{SOURCE7}  $RPM_BUILD_ROOT%{_sysusersdir}/lcdproc.conf
+for i in lcdproc.service LCDd.service LCDd-hwdetect.service; do
+  ln -s ../$i $RPM_BUILD_ROOT%{_unitdir}/lcdproc.target.wants
+done
+
+#Disable default configuration
+#Thoses are only provided as an example since ncurses isn't a suitable default configuration.
+for f in LCDd.conf lcdproc.conf ; do
+  mv $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/${f} \
+    $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/${f}.example
+done
+
 
 
 
 %post
-if [ $1 -eq 1 ]; then
+%systemd_post LCDd.service lcdproc.service
-# Add init script but don't start it
-  /sbin/chkconfig --add LCDd 
-  /sbin/chkconfig --add lcdproc ||:
-fi
 
 
 %preun
-if [ $1 -eq 0 ]; then
+%systemd_preun LCDd.service lcdproc.service
-# Disable driver on final removal
-  %{_initrddir}/lcdproc stop &>/dev/null
-  %{_initrddir}/LCDd stop &>/dev/null
-  /sbin/chkconfig --del lcdproc
-  /sbin/chkconfig --del LCDd  ||:
-fi
 
 
-%clean
+%postun
-rm -rf $RPM_BUILD_ROOT __doc
+%systemd_postun_with_restart LCDd.service lcdproc.service
+
 
 %files
-%defattr(-,root,root,-)
+%doc %{_docdir}/%{name}
-%doc README* INSTALL COPYING CREDITS TODO ChangeLog
+%license COPYING
-%doc docs/*.txt docs/README.* __doc/*
 %{_bindir}/*
-%dir %{_libdir}/lcdproc
-%{_libdir}/lcdproc/*
 %{_sbindir}/*
+%{_libdir}/lcdproc/
 %{_mandir}/man?/*
-%dir %{_sysconfdir}/sysconfig/%{name}
+%dir %{_sysconfdir}/%{name}
-%config(noreplace) %{_sysconfdir}/sysconfig/%{name}/*.conf
+%config %{_sysconfdir}/%{name}/*.conf
-%{_initrddir}/LCDd
+%config %{_sysconfdir}/%{name}/*.conf.example
-%{_initrddir}/lcdproc
+%{_unitdir}/*
+%{_udevrulesdir}/90-%{name}.rules
+%{_sysusersdir}/lcdproc.conf
 
 
 %changelog
+* Thu Jul 24 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-26.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Tue Feb 11 2025 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5.9-25.20210209git5c21e8c
+- Drop call to %sysusers_create_compat
+
+* Fri Jan 17 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-24.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Mon Jul 29 2024 Miroslav Suchý <msuchy@redhat.com> - 0.5.9-23.20210209git5c21e8c
+- convert license to SPDX
+
+* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-22.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Thu Jan 25 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-21.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-20.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-19.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-18.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-17.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-16.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-15.20210209git5c21e8c
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Thu Apr 15 2021 Hans de Goede <hdegoede@redhat.com> - 0.5.9-14.20210209git5c21e8c
+- Sync with latest upstream git
+- Add support for LCD found on Logitech Z-10 speakers,
+  inc. autodetect by udev + automatic LCDd.conf generation by LCDd-hwdetect
+- Fix Logitech G15 family devices requiring a manual restart of LCDd
+  after a unplug + replug
+- Drop ghosting of /etc/lcdproc/*.conf files, these may contain user
+  modifications, so they should not be removed on package removal
+- This also fixes lcdexec.conf and lcdvc.conf not being packaged
+
+* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5.9-13.20190625git781b311
+- Rebuilt for updated systemd-rpm-macros
+  See https://pagure.io/fesco/issue/2583.
+
+* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-12.20190625git781b311
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Nov 24 21:06:08 GMT 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 0.5.9-11.20190625git781b311
+- Build with libusb1
+
+* Thu Aug 20 2020 Jeff Law <law@redhat.com> - 0.5.9-10.20190625git781b311
+- Re-enable LTO
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-9.20190625git781b311
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Tue Jul 14 2020 Jeff Law <law@redhat.com> - 0.5.9-8.20190625git781b311
+- Disable LTO
+
+* Fri Mar 20 2020 Hans de Goede <hdegoede@redhat.com> - 0.5.9-7.20190625git781b311
+- Drop svgalib support, svgalib is being dropped from the distro (rhbz#1814816)
+
+* Mon Feb 24 2020 Than Ngo <than@redhat.com> - 0.5.9-6.git
+- Fixed FTBFS against gcc10
+
+* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-5.20190625git781b311
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Fri Oct  4 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-4.20190625git781b311
+- Replace Group=lcdd statement in LCDd.service with Group=nobody, LCDd does not
+  need a special group and it breaks starting LCDd (rhbz#1742994)
+
+* Thu Oct  3 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-3.20190625git781b311
+- The patch adding the keycodes for LCD menu buttons on Logitech keyboards was
+  still pending upstream. The final version of the patch has changed the codes,
+  update LCDd-hwdetect.sh to use the new codes when writing out LCDd.conf
+
+* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-2.20190625git781b311
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu Jul 04 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-1.20190625git781b311
+- Update to upstream 0.5.9 release + latest improvements from git
+- Add support for Logitech MX5000, MX5500, G15, G15 V2 and G510 keyboards
+- Add LCDd-hwdetect script automatically generating LCDd.conf for
+  USB gaming keyboards with LCD panels and LCD2USB devices
+- Add udev-rules to call LCDd-hwdetect when there is no existing LCDd.conf
+  and to make LCDd and lcdproc hw-activated when using supported USB devices
+
+* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-14
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Mon Aug 07 2017 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 0.5.7-11
+- Remove unneeded BuildRequires: pth-devel
+
+* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+
+* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Thu Sep 29 2016 Nicolas Chauvet <kwizart@gmail.com> - 0.5.7-7
+- Remove ControlGroup from services - rhbz#1324015
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Sat Oct 04 2014 Dan Horák <dan[at]danny.cz> - 0.5.7-4
+- update BR, libusbx-devel is brought in by libftdi-devel
+
+* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Fri May 30 2014 Peter Robinson <pbrobinson@fedoraproject.org> 0.5.7-1
+- Update to 0.5.7
+- Build against libusbx and libftdi 1
+- Cleanup spec
+
+* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.6-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 0.5.6-5
+- Perl 5.18 rebuild
+
+* Sat Apr 27 2013 Nicolas Chauvet <kwizart@gmail.com> - 0.5.6-4
+- Enable hardened build rhbz#955453
+
+* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.6-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Mon Jan 07 2013 Dan Horák <dan[at]danny.cz> - 0.5.6-2
+- update BR for s390(x)
+
+* Wed Jan 02 2013 Nicolas Chauvet <kwizart@gmail.com> - 0.5.6-1
+- Update to 0.5.6
+
+* Wed Aug 29 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-6
+- Add systemd macro - rbz#850181
+
+* Sun Jul 22 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-5
+- Fix for rhbz#821270
+
+* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.5-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Mon Feb 13 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-3
+- Convert to native systemd units
+
+* Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.5-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Tue Nov 29 2011 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-1
+- Update to 5.5
+- Fix path of functions
+- Disable xosd and svga
+
+* Wed Mar 30 2011 Nicolas Chauvet <kwizart@gmail.com> - 0.5.4-1
+- Update to 0.5.4
+
+* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.3-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Sun Apr 18 2010 Nicolas Chauvet <kwizart@fedoraproject.org> - 0.5.3-5
+- Remove Uneeded BR - rhbz#572621
+- Rebuild for libftdi update - rhbz#581601
+
+* Thu Sep 10 2009 Jarod Wilson <jarod@redhat.com> - 0.5.3-4
+- Add BR: libftdi-devel to build lis driver (#522270)
+
+* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.3-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Thu Jun 25 2009 Jarod Wilson <jarod@redhat.com> - 0.5.3-2
+- Fix broken LCDd initscript patch that prevented it from starting
+
+* Mon Jun 22 2009 Jarod Wilson <jarod@redhat.com> - 0.5.3-1
+- Update to lcdproc v0.5.3 release
+- Drop upstreamed imonlcd and memset_swp patches
+- Switch to upstream's rpm initscripts (albeit still patched, need
+  to get that bit upstream for the next release)
+
+* Wed May 13 2009 kwizart < kwizart at gmail.com > - 0.5.2-12
+- Improve the initscripts patch - Fix #498384
+
+* Tue Apr 14 2009 kwizart < kwizart at gmail.com > - 0.5.2-11
+- Disable xmlto validation (Fix FTBFS)
+- Disable default configuration (only provided as examples)
+
+* Thu Mar  5 2009 kwizart < kwizart at gmail.com > - 0.5.2-10
+- Disable LCDd lcdproc initscript by default.
+  (It needs to be configured first).
+
+* Mon Mar  2 2009 kwizart < kwizart at gmail.com > - 0.5.2-9
+- re-enable patch0
+- Prevent some timestamps changes.
+
+* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.2-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Fri Nov 07 2008 Jarod Wilson <jarod@redhat.com> - 0.5.2-7
+- Add SoundGraph iMon and Antec Veris LCD device support
+- Replace start_daemon w/daemon in initscripts (#468611)
+
 * Tue Jul  8 2008 kwizart < kwizart at gmail.com > - 0.5.2-6
 - Add BR on Fedora > 9 : docbook-dtds
 
@@ -146,7 +401,7 @@ rm -rf $RPM_BUILD_ROOT __doc
 * Sun Aug 12 2007 kwizart < kwizart at gmail.com > 0.5.2-2
 - Fix memset swap from djones advice
 - License is GPLv2
-- Fix #246971 
+- Fix #246971
 
 * Sat May 19 2007 kwizart < kwizart at gmail.com > 0.5.2-1
 - Update to 0.5.2

lcdproc.sysusers

@@ -0,0 +1 @@
+g lcdd -

lcdproc.target

@@ -0,0 +1,3 @@
+[Unit]
+Description=lcdproc Target
+StopWhenUnneeded=yes

sources

@@ -1 +1 @@
-860f192d061d87dda6512b11b79daac2  lcdproc-0.5.2.tar.gz
+SHA512 (lcdproc-5c21e8c.tar.gz) = cc0f6622bfc76382306d1419b76e9d9d16740722bc29568559f4b022e0747a2edb3fece8d3f3d5871972b778290bc6178bd2de3919b6eae019505551e91f93cb