14 changed files with 376 additions and 612 deletions
--- a/.gitignore
+++ b/.gitignore
@ -1,7 +1,3 @@
 lcdproc-0.5.2.tar.gz
 lcdproc-0.5.3.tar.gz
 /lcdproc-0.5.4.tar.gz
-/lcdproc-0.5.6.tar.gz
-/lcdproc-0.5.7.tar.gz
-/lcdproc-781b311.tar.gz
-/lcdproc-5c21e8c.tar.gz
--- a/0001-server-drivers-g15-Add-support-for-the-LCD-on-Logite.patch
+++ b/0001-server-drivers-g15-Add-support-for-the-LCD-on-Logite.patch
@ -1,33 +0,0 @@
-From 1c6be22c5eeea9a7f83192153b282b6002b89923 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 12 Apr 2021 22:44:06 +0200
-Subject: [PATCH] server/drivers/g15: Add support for the LCD on Logitech Z-10
- speakers
-
-The LCD on Logitech Z-10 speakers uses the exact same protocol as on
-the g15 keyboards, add the USB-id + HID-descriptor header of the
-USB-intf. for the LCD.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
- server/drivers/g15.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/server/drivers/g15.c b/server/drivers/g15.c
-index 154e253..48f5fe5 100644
--- a/server/drivers/g15.c
-+++ b/server/drivers/g15.c
-@@ -90,6 +90,10 @@ static const struct lib_hidraw_id hidraw_ids[] = {
- 	{ { BUS_USB, 0x046d, 0xc22e },
- 	  { 0x05, 0x0c, 0x09, 0x01, 0xa1, 0x01, 0x85, 0x02,
- 	    0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, 0x07 } },
-+	/* Z-10 */
-+	{ { BUS_USB, 0x046d, 0x0a07 },
-+	  { 0x06, 0x00, 0xff, 0x09, 0x00, 0xa1, 0x01, 0x15,
-+	    0x00, 0x26, 0xff, 0x00, 0x75, 0x08, 0x95, 0x08 } },
- 	/* Terminator */
- 	{}
- };
-- 
-2.31.1
-
--- a/90-lcdproc.rules
+++ b/90-lcdproc.rules
@ -1,57 +0,0 @@
-# lcdproc udev rules
-
-ACTION!="add", GOTO="lcdproc_end"
-
-### 1. Check for USB LCD panels which we access directly through libusb ###
-
-# Till Harbaum's LCD2USB device
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c630", GOTO="lcdproc_lcd_found"
-
-### 2. Check for HID LCD panels accessed through their hidraw device ###
-
-# Logitech MX5000 keyboard Bluetooth and USB (BT receiver as HID-proxy) modes
-DEVPATH=="*/0003:046D:B305.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-DEVPATH=="*/0005:046D:B305.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-
-# Logitech MX5500 keyboard Bluetooth and USB (BT receiver as HID-proxy) modes
-DEVPATH=="*/0003:046D:B30B.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-DEVPATH=="*/0005:046D:B30B.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-
-# Logitech G15 gaming keyboard
-DEVPATH=="*/0003:046D:C222.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-
-# Logitech G15 v2 gaming keyboard
-DEVPATH=="*/0003:046D:C227.*/hidraw/hidraw*", GOTO="lcdproc_lcd_found"
-
-# Logitech G510 gaming keyboard, note we only want interface 1
-DEVPATH=="*/0003:046D:C22D.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="01", GOTO="lcdproc_lcd_found"
-DEVPATH=="*/0003:046D:C22E.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="01", GOTO="lcdproc_lcd_found"
-
-# Logitech Z-10 speakers with G15 style LCD screen, note we only want interface 2
-DEVPATH=="*/0003:046D:0A07.*/hidraw/hidraw*", ATTRS{bInterfaceNumber}=="02", GOTO="lcdproc_lcd_found"
-
-### 3. Check for input devices for LCD menu buttons ###
-
-# Logitech G15, G15 v2 and G510 Gaming and LCD menu keys
-SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Gaming Keyboard Gaming Keys", GOTO="lcdproc_input_found"
-# Logitech MX5000 keyboard connected over Bluetooth
-SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech MX5000 Keyboard", GOTO="lcdproc_input_found"
-# Logitech MX5000 keyboard connected through its receiver in USB HID proxy mode
-SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Wireless Keyboard PID:b305", GOTO="lcdproc_input_found"
-# Logitech Z-10 speakers LCD menu keys
-SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="Logitech Z-10 LCD Menu Keys", GOTO="lcdproc_input_found"
-
-
-### Nothing found, leave ###
-GOTO="lcdproc_end"
-
-
-LABEL="lcdproc_lcd_found"
-TAG+="systemd"
-ENV{SYSTEMD_WANTS}+="lcdproc.target"
-
-LABEL="lcdproc_input_found"
-# Grant rw permission to the lcdd group using acl(5), for both LCD and input devs
-RUN+="/usr/bin/sh -c '/usr/bin/setfacl -m g:lcdd:rw %E{DEVNAME} 2>/dev/null || :'"
-
-LABEL="lcdproc_end"
--- a/LCDd-hwdetect.service
+++ b/LCDd-hwdetect.service
@ -1,9 +0,0 @@
-[Unit]
-Description=LCDd hardware detection Service
-After=syslog.target
-Before=LCDd.service
-ConditionPathExists=!/etc/lcdproc/LCDd.conf
-
-[Service]
-Type=oneshot
-ExecStart=/usr/sbin/LCDd-hwdetect
--- a/LCDd-hwdetect.sh
+++ b/LCDd-hwdetect.sh
@ -1,179 +0,0 @@
-#!/bin/bash
-
-lcd_device=""
-extra_lcd_devices=""
-lcd_driver=""
-input_name=""
-
-add_device () {
-  if [ -z "$lcd_device" ]; then
-    lcd_device="$1"
-    lcd_driver="$2"
-    input_name="$3"
-  elif [ "$1" != "$lcd_device" ]; then
-    extra_lcd_devices="$extra_lcd_devices $1"
-  fi
-}
-
-if [ -f /etc/lcdproc/LCDd.conf ]; then
-   echo "/etc/lcdproc/LCDd.conf already exists"
-   echo "If you want LCDd-hwdetect to create a new config move it out of the way"
-   exit 1
-fi
-
-# USB devices where we use raw USB access (through libusb)
-if [ -d /sys/bus/hid/devices ]; then
-  for i in $(cat /sys/bus/usb/devices/*/modalias); do
-    case "$i" in
-      usb:v0403pC630d*)
-        add_device "lcd2usb" "hd44780"
-        ;;
-    esac
-  done
-fi
-
-# HID devices
-if [ -d /sys/bus/hid/devices ]; then
-  pushd /sys/bus/hid/devices > /dev/null
-    for i in $(ls); do
-      case "$i" in
-        # Logitech MX5000 connected through its receiver in USB HID proxy mode
-        0003:046D:B305.*)
-          add_device "mx5000" "mx5000" "Logitech Wireless Keyboard PID:b305"
-          ;;
-        # Logitech MX5000 connected over bluetooth
-        0005:046D:B305.*)
-          add_device "mx5000" "mx5000" "Logitech MX5000 Keyboard"
-          ;;
-        # Logitech MX5500 connected through its receiver in USB HID proxy mode
-        # Note the MX5500's LCD menu buttons are not accessible by the host
-        0003:046D:B30B.*)
-          add_device "mx5500" "mx5000"
-          ;;
-        # Logitech MX5500 connected over bluetooth, no usable LCD menu btns
-        0005:046D:B30B.*)
-          add_device "mx5500" "mx5000"
-          ;;
-        # Logitech G15
-        0003:046D:C222.*)
-          add_device "g15"    "g15" "Logitech Gaming Keyboard Gaming Keys"
-          ;;
-        # Logitech G15 v2
-        0003:046D:C227.*)
-          add_device "g15-v2" "g15" "Logitech Gaming Keyboard Gaming Keys"
-          ;;
-        # Logitech G510 without a headset plugged in, without USB audio intf.
-        0003:046D:C22D.*)
-          add_device "g510"   "g15" "Logitech Gaming Keyboard Gaming Keys"
-          ;;
-        # Logitech G510 with a headset plugged, with extra USB audio intf.
-        0003:046D:C22E.*)
-          add_device "g510"   "g15" "Logitech Gaming Keyboard Gaming Keys"
-          ;;
-        # Logitech Z10 speakers
-        0003:046D:0A07.*)
-          add_device "z-10"   "g15" "Logitech Z-10 LCD Menu Keys"
-          ;;
-      esac
-    done
-  popd > /dev/null
-fi
-
-if [ -z "$lcd_device" ]; then
-  echo "No known LCD devices detected"
-  exit 1
-fi
-
-echo "Detected $lcd_device LCD device"
-if [ -n "$extra_lcd_devices" ]; then
-  echo "Detected extra LCD devices:$extra_lcd_devices"
-  echo "Multiple devices are not supported, these extra LCD devices will be ignored"
-fi
-
-# Write LCDd.conf for the found device, also:
-# Disable the server screen in the rotation of screens
-# Disable the annoying blinking heartbeat by default
-# Disable title scrolling (set the speed to 0) most keyboard LCDs have
-#  a low refresh rate making the scrolling look terrible
-cat /etc/lcdproc/LCDd.conf.example | \
-  sed -e "s/^Driver=curses/Driver=$lcd_driver/" \
-      -e "s/#ServerScreen=no/ServerScreen=no/" \
-      -e "s/#Heartbeat=open/Heartbeat=off/" \
-      -e "s/#TitleSpeed=10/TitleSpeed=0/" > \
-  /etc/lcdproc/LCDd.conf
-
-# Add input-device config if specified
-# Also set prev / next screen to up/down since non of the supported devices
-# has enough buttons to create mappings for both left and right
-# And uncomment the LeftKey and RightKey assignments so that they work
-# when they are available
-if [ "$input_name" ]; then
-  sed -i -e "s|Driver=$lcd_driver|Driver=$lcd_driver\nDriver=linux_input|" \
-         -e "s|PrevScreenKey=Left|PrevScreenKey=Up|" \
-         -e "s|NextScreenKey=Right|NextScreenKey=Down|" \
-         -e "s|# Device=/dev/input/event0|Device=\"$input_name\"|" \
-         -e "s|#LeftKey=Left|LeftKey=Left|" \
-         -e "s|#RightKey=Right|RightKey=Right|" \
-    /etc/lcdproc/LCDd.conf
-fi
-
-# Device specific config bits
-case "$lcd_device" in
-  "lcd2usb")
-    # This assume a 16x2 display as the lcd2usb board is typically sold with
-    # this display on aliexpress / banggood.   There are only 2 buttons making
-    # menu navigation impossible. We map button 1 to toggling auto-rotate on/off
-    # and button 2 to manually switching to the next screen
-    sed -i -e 's/ConnectionType=4bit/ConnectionType=lcd2usb/' \
-           -e 's/Keypad=no/Keypad=yes/' \
-           -e 's/#Contrast=0/Contrast=600/' \
-           -e 's/Size=20x4/Size=16x2/g' \
-           -e 's/KeyMatrix_4_1=Enter/# Button config for lcd2usb, not enough buttons for menu navigation/' \
-           -e 's/KeyMatrix_4_2=Up/# so we only do screen rotation control/' \
-           -e 's/KeyMatrix_4_3=Down/KeyDirect_1=Enter/' \
-           -e 's/KeyMatrix_4_4=Escape/KeyDirect_2=Right/' \
-      /etc/lcdproc/LCDd.conf
-    ;;
-  "g15"|"g15-2"|"g510"|"z-10")
-    sed -i -e "s/# specify a non-default key map/# Keymap for the G15's 5 LCD-menu buttons/" \
-           -e 's/#key=1,Escape/key=0x2b8,Escape/' \
-           -e 's/#key=28,Enter/key=0x2b9,Left/' \
-           -e 's/#key=96,Enter/key=0x2ba,Up/' \
-           -e 's/#key=105,Left/key=0x2bb,Down/' \
-           -e 's/#key=106,Right/key=0x2bc,Enter/' \
-           -e 's/#key=103,Up//' \
-           -e 's/#key=108,Down//' \
-      /etc/lcdproc/LCDd.conf
-    ;;
-  "mx5000")
-    sed -i -e "s/# specify a non-default key map/# Keymap for the MX5000's 4 LCD-menu buttons/" \
-           -e 's/#key=1,Escape/key=0x2b8,Escape/' \
-           -e 's/#key=28,Enter/key=0x2b9,Up/' \
-           -e 's/#key=96,Enter/key=0x2ba,Down/' \
-           -e 's/#key=105,Left/key=0x2bb,Enter/' \
-           -e 's/#key=106,Right//' \
-           -e 's/#key=103,Up//' \
-           -e 's/#key=108,Down//' \
-      /etc/lcdproc/LCDd.conf
-    ;;
-esac
-
-echo "Wrote /etc/lcdproc/LCDd.conf for $lcd_device using $lcd_driver driver"
-
-# If there is no lcdproc.conf, generate one from the example file
-if [ -f /etc/lcdproc/lcdproc.conf ]; then
-  exit 0
-fi
-  
-install -p -m 644 /etc/lcdproc/lcdproc.conf.example /etc/lcdproc/lcdproc.conf
-
-# Device specific config bits
-case "$lcd_device" in
-  "mx5000"|"mx5500")
-    # The mx5000 and mx5500 do not do vertical-bars, disable load screen 
-    sed -i -e '73s/Active=True/Active=false/' \
-      /etc/lcdproc/lcdproc.conf
-    ;;
-esac
-
-echo "Wrote /etc/lcdproc/lcdproc.conf"
--- a/LCDd.service
+++ b/LCDd.service
@ -1,12 +0,0 @@
-[Unit]
-Description=LCDd Service
-After=syslog.target
-
-[Service]
-Type=forking
-ExecStart=/usr/sbin/LCDd -c /etc/lcdproc/LCDd.conf
-User=root
-Group=lcdd
-
-[Install]
-WantedBy=multi-user.target
--- a/lcdproc-0.5.3-initscripts.patch
+++ b/lcdproc-0.5.3-initscripts.patch
@ -0,0 +1,305 @@
+Index: lcdproc-0.5.3/scripts/init-LCDd.rpm.in
+===================================================================
+--- lcdproc-0.5.3.orig/scripts/init-LCDd.rpm.in
+++ lcdproc-0.5.3/scripts/init-LCDd.rpm.in
+@@ -1,5 +1,5 @@
+ #!/bin/sh
+-# This is the LCDd init-script for RPM based (RedHat, Mandrake) systems
+# This is the LCDd init-script for RPM based (Red Hat, Mandrake) systems
+ #
+ # Copyright (C) 2001  Rene Wagner <reenoo@gmx.de>
+ #               2001  Guillaume Filion <gfk@logidac.com>
+@@ -19,25 +19,53 @@
+ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
+ #
+ #
+-# chkconfig: 345 70 21
+# chkconfig: - 70 21
+ # description: LCDd(8) is the LCDproc server used for displaying text and other data to LCDs. \
+ #	Apart from the main client lcdproc(1) there are various clients. \
+ #	See http://lcdproc.omnipotent.net for details.
+ # processname: LCDd
+ # pidfile: /var/run/LCDd.pid
+ # config: @sysconfdir@/LCDd.conf
+#
+### BEGIN INIT INFO
+# Provides:          LCDd
+# Required-Start:    $syslog $local_fs $network $remote_fs
+# Required-Stop:     $syslog $local_fs $network $remote_fs
+# Should-Start:      udev
+# Default-Start:
+# Default-Stop:      S 0 1 6
+# Short-Description: LCDproc Server Daemon
+# Description:       init script for LCDd, the display
+#                    server daemon in the LCDproc suite
+### END INIT INFO
+
+prog=LCDd
+lockfile=/var/lock/subsys/$prog
+configfile=@sysconfdir@/$prog.conf
+
+# load LSB 3.x init functions
+if [ -e /lib/lsb/init-functions ]; then
+  . /lib/lsb/init-functions
+fi
+ 
+ # Source function library.
+-. /etc/rc.d/init.d/functions
+if [ -e /etc/init.d/functions ]; then
+  . /etc/init.d/functions
+fi
+ 
+ # Source networking configuration.
+-. /etc/sysconfig/network
+if [ -e /etc/sysconfig/network ]; then
+  . /etc/sysconfig/network
+fi
+ 
+ # Check that networking is up.
+ if [ ${NETWORKING} = "no" ]; then
+         exit 0
+ fi
+ 
+# check that non-default config file exists.
+[ -f $configfile ] || exit 6
+
+ RETVAL=0
+ 
+ prefix=@prefix@
+@@ -46,41 +74,49 @@ bindir=@bindir@
+ sbindir=@sbindir@
+ etc=@sysconfdir@
+ 
+-LCDd=${sbindir}/LCDd
+-configfile=${etc}/LCDd.conf
+-
+-[ -x ${LCDd} ] || exit 0
+[ -x ${sbindir}/${prog} ] || exit 0
+ 
+ start() {
+-	echo -n "Starting up LCDd: "
+-	daemon ${LCDd} -c ${configfile}
+-
+	echo -n "Starting ${prog} service: "
+	daemon ${prog} -c ${configfile}
+ 	RETVAL=$?
+-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/LCDd
+ 	echo
+	[ $RETVAL -eq 0 ] && touch ${lockfile} || \
+	   RETVAL=1
+	return $RETVAL
+ }
+ 
+ stop() {
+-	echo -n "Shutting down LCDd: "
+-	killproc LCDd
+	echo -n "Shutting down ${prog} service: "
+	killproc ${prog}
+ 	RETVAL=$?
+-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/LCDd
+ 	echo
+	[ $RETVAL -eq 0 ] && rm -f ${lockfile}
+	return $RETVAL
+ }
+ 
+-dostatus() {
+-	status LCDd
+reload() {
+	echo -n $"Reloading ${prog} conig file: "
+	killproc ${prog} -HUP
+ 	RETVAL=$?
+	echo
+	return $RETVAL
+}
+
+dostatus() {
+	status ${prog}
+	return $?
+ }
+ 
+ restart() {
+ 	stop
+ 	start
+-	RETVAL=$?
+	return $?
+ }
+ 
+ condrestart() {
+-	[ -e /var/lock/subsys/LCDd ] && restart || :
+	[ -f ${lockfile} ] && restart || :
+	return $?
+ }
+ 
+ # See how we were called.
+@@ -94,15 +130,18 @@ case "$1" in
+   status)
+ 	dostatus
+ 	;;
+-  restart)
+  restart|force-reload)
+ 	restart
+ 	;;
+-  condrestart)
+  try-restart|condrestart)
+ 	condrestart
+ 	;;
+  reload)
+	reload
+	;;
+   *)
+-	echo "Usage: $0 {start|stop|status|restart|condrestart}"
+-	exit 1
+	echo "Usage: $0 {start|stop|status|restart|condrestart|reload}"
+	exit 2
+ esac
+ 
+ exit $RETVAL
+Index: lcdproc-0.5.3/scripts/init-lcdproc.rpm.in
+===================================================================
+--- lcdproc-0.5.3.orig/scripts/init-lcdproc.rpm.in
+++ lcdproc-0.5.3/scripts/init-lcdproc.rpm.in
+@@ -19,68 +19,104 @@
+ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
+ #
+ #
+-# chkconfig: 345 71 20
+# chkconfig: - 71 20
+ # description: LCDd(8) is the LCDproc server used for displaying text and other data to LCDs. \
+ #	Apart from the main client lcdproc(1) there are various clients. \
+ #	See http://lcdproc.omnipotent.net for details.
+ # processname: lcdproc
+ # pidfile: /var/run/lcdproc.pid
+-# config: /etc/sysconfig/lcdproc
+# config: @sysconfdir@/lcdproc.conf
+#
+### BEGIN INIT INFO
+# Provides:          lcdproc
+# Required-Start:    $syslog $local_fs $network $remote_fs
+# Required-Stop:     $syslog $local_fs $network $remote_fs
+# Should-Start:      LCDd
+# Default-Start:
+# Default-Stop:      S 0 1 6
+# Short-Description: LCDproc system status information viewer
+# Description:       LSB init script for lcdproc, the system
+#                    status information viewer in the LCDproc suite
+### END INIT INFO
+
+prog=lcdproc
+lockfile=/var/lock/subsys/$prog
+configfile=@sysconfdir@/$prog.conf
+RETVAL=0
+
+# load LSB 3.x init functions
+if [ -e /lib/lsb/init-functions ]; then
+  . /lib/lsb/init-functions
+fi
+ 
+ # Source function library.
+-. /etc/rc.d/init.d/functions
+if [ -e /etc/init.d/functions ]; then
+  . /etc/init.d/functions
+fi
+ 
+ # Source networking configuration.
+-. /etc/sysconfig/network
+if [ -e /etc/sysconfig/network ]; then
+  . /etc/sysconfig/network
+fi
+ 
+ # Check that networking is up.
+ if [ ${NETWORKING} = "no" ]; then
+         exit 0
+ fi
+ 
+-RETVAL=0
+-
+ prefix=@prefix@
+ exec_prefix=@exec_prefix@
+ bindir=@bindir@
+ sbindir=@sbindir@
+ etc=@sysconfdir@
+ 
+-lcdproc=${bindir}/lcdproc
+[ -x ${bindir}/${prog} ] || exit 0
+ 
+-[ -x ${lcdproc} ] || exit 0
+# check that non-default config file exists.
+ [ -f $configfile ] || exit 6
+ 
+ 
+ start() {
+-	echo -n "Starting up lcdproc: "
+-	daemon ${lcdproc} $SCREENS
+-
+	echo -n "Starting ${prog} service: "
+	daemon ${prog} -c ${configfile}
+ 	RETVAL=$?
+-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/lcdproc
+ 	echo
+	[ $RETVAL -eq 0 ] && touch ${lockfile} || \
+	   RETVAL=1
+	return $RETVAL
+ }
+ 
+ stop() {
+-	echo -n "Shutting down lcdproc: "
+-	killproc lcdproc
+	echo -n "Shutting down ${prog} service: "
+	killproc ${prog}
+ 	RETVAL=$?
+-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/lcdproc
+ 	echo
+	[ $RETVAL -eq 0 ] && rm -f ${lockfile}
+	return $RETVAL
+ }
+ 
+-dostatus() {
+-	status lcdproc
+reload() {
+	echo -n $"Reloading ${prog} config file: "
+	killproc ${prog} -HUP
+ 	RETVAL=$?
+	echo
+	return $RETVAL
+}
+
+dostatus() {
+	status ${prog}
+	return $?
+ }
+ 
+ restart() {
+ 	stop
+ 	start
+-	RETVAL=$?
+	return $?
+ }
+ 
+ condrestart() {
+-	[ -e /var/lock/subsys/lcdproc ] && restart || :
+	[ -f ${lockfile} ] && restart || :
+	return $?
+ }
+ 
+ # See how we were called.
+@@ -94,14 +130,17 @@ case "$1" in
+   status)
+ 	dostatus
+ 	;;
+-  restart)
+  restart|force-reload)
+ 	restart
+ 	;;
+-  condrestart)
+  try-restart|condrestart)
+ 	condrestart
+ 	;;
+  reload)
+	reload
+	;;
+   *)
+-	echo "Usage: $0 {start|stop|status|restart|condrestart}"
+	echo "Usage: $0 {start|stop|status|restart|condrestart|reload}"
+ 	exit 1
+ esac
+ 
--- a/lcdproc-conf.patch
+++ b/lcdproc-conf.patch
@ -1,30 +0,0 @@
-diff -up lcdproc-0.5.7/clients/lcdproc/lcdproc.conf~ lcdproc-0.5.7/clients/lcdproc/lcdproc.conf
--- lcdproc-0.5.7/clients/lcdproc/lcdproc.conf~	2014-03-23 11:22:07.000000000 +0100
-+++ lcdproc-0.5.7/clients/lcdproc/lcdproc.conf	2019-06-02 12:44:40.366733461 +0200
-@@ -39,7 +39,7 @@ ShowInvisible=false
- 
- [Iface]
- # Show screen
-Active=True
-+Active=false
- 
- # Show stats for Interface0
- Interface0=eth0
-@@ -79,7 +79,7 @@ HighLoad=1.3
- 
- [TimeDate]
- # Show screen
-Active=True
-+Active=false
- # time format [default: %H:%M:%S; legal: see strftime(3)]
- TimeFormat="%H:%M:%S"
- # date format [default: %x; legal: see strftime(3)]
-@@ -130,7 +130,7 @@ Active=false
- 
- [ProcSize]
- # Show screen
-Active=false
-+Active=True
- 
- 
- [Disk]
--- a/lcdproc.rpmlintrc
+++ b/lcdproc.rpmlintrc
@ -1,3 +0,0 @@
-addFilter("conffile-without-noreplace-flag")
-addFilter("no-manual-page-for-binary")
-addFilter("incorrect-fsf-address")
--- a/lcdproc.service
+++ b/lcdproc.service
@ -1,11 +0,0 @@
-[Unit]
-Description=lcdproc Service
-After=syslog.target LCDd.service
-
-[Service]
-Type=forking
-PIDFile=/run/lcdproc.pid
-ExecStart=/usr/bin/lcdproc -c /etc/lcdproc/lcdproc.conf
-
-[Install]
-WantedBy=multi-user.target
--- a/lcdproc.spec
+++ b/lcdproc.spec
@ -1,338 +1,139 @@
-%global commit 5c21e8c75fbab53574275c8007f5af746e333144
-%global commitdate 20210209
-%global shortcommit %(c=%{commit}; echo ${c:0:7})
-
-Summary:        Display real-time system information on a 20x4 back-lit LCD
+Summary:        LCDproc displays real-time system information on a 20x4 backlit LCD
 Name:           lcdproc
-Version:        0.5.9
-Release:        26.%{commitdate}git%{shortcommit}%{?dist}
-# Automatically converted from old format: GPLv2 - review is highly recommended.
-License:        GPL-2.0-only
-URL:            http://lcdproc.org
-Source0:        https://github.com/%{name}/%{name}/archive/%{commit}/%{name}-%{shortcommit}.tar.gz
-Source1:        lcdproc.service
-Source2:        lcdproc.target
-Source3:        LCDd.service
-Source4:        LCDd-hwdetect.service
-Source5:        LCDd-hwdetect.sh
-Source6:        90-lcdproc.rules
-Source7:        lcdproc.sysusers
-Patch1:         0001-server-drivers-g15-Add-support-for-the-LCD-on-Logite.patch
-# lcdconf.conf tweaks:
-# 1. Enable ProcSize, this is quite useful to have
-# 2. Disable TimeDate, its info is duplicate with the MiniClock and it is ugly
-# 3. Disable network interface screen by default, since Fedora uses predictable
-#    network interface names, having a simple default like Interface0=eth0 does
-#    not work
-Patch99:        lcdproc-conf.patch
+Version:        0.5.5
+Release:        1%{?dist}
+License:        GPLv2
+URL:            http://lcdproc.omnipotent.net
+Group:          System Environment/Libraries
+Source0:        http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz
+Patch0:         lcdproc-0.5.3-initscripts.patch
+BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

-BuildRequires:  perl-generators
-BuildRequires:  systemd-rpm-macros
 BuildRequires:  doxygen
 BuildRequires:  graphviz
+BuildRequires:  libtool

-BuildRequires:  freetype-devel
-%ifnarch s390 s390x
-BuildRequires:  libhid-devel
-%endif
-BuildRequires:  libusb1-devel
+BuildRequires:  libusb-devel
 BuildRequires:  lirc-devel
 BuildRequires:  ncurses-devel
 BuildRequires:  openldap-devel
+BuildRequires:  pth-devel
 BuildRequires:  xmlto
+%if 0%{?fedora} > 9
 BuildRequires:  docbook-dtds
+%endif
 BuildRequires:  libX11-devel
 BuildRequires:  libXext-devel
 BuildRequires:  libftdi-devel
-BuildRequires:  libg15render-devel
-BuildRequires:  mx5000tools-devel
-BuildRequires:  libtool autoconf automake
-BuildRequires:  gcc make

-%{?systemd_requires}
+Requires(post):  /sbin/chkconfig
+Requires(postun):  /sbin/chkconfig



 %description
-LCDproc is a client/server suite including drivers for all
+LCDproc is a client/server suite inclduding drivers for all
 kinds of nifty LCD displays. The server supports several
 serial devices: Matrix Orbital, Crystal Fontz, Bayrad, LB216,
-LCDM001 (http://kernelconcepts.de), Wirz-SLI and PIC-an-LCD; and some
+LCDM001 (kernelconcepts.de), Wirz-SLI and PIC-an-LCD; and some
 devices connected to the LPT port: HD44780, STV5730, T6963,
 SED1520 and SED1330. Various clients are available that display
-things like CPU load, system load, memory usage, up-time, and a lot more.
+things like CPU load, system load, memory usage, uptime, and a lot more.
 See also http://lcdproc.omnipotent.net.


 %prep
-%autosetup -p1 -n %{name}-%{commit}
-# Fixup DriverPath
+%setup -q
+%patch0 -p1 -b .initscripts
+chmod 644 server/drivers/timing.h
+
 sed -i -e 's|server/drivers|%{_libdir}/lcdproc|' LCDd.conf
 touch -r TODO LCDd.conf

+#Disable svga for now
+sed -i -e 's|SureElec,svga|SureElec|' acinclude.m4
+autoreconf -vif

 %build
-# This package has a configure test which uses ASMs, but does not link the
-# resultant .o files.  As such the ASM test is always successful in a LTO
-# build.  We can force code generation with the -ffat-lto-objects to make
-# the test work as expected.
-#
-# -ffat-lto-objects is the default for F33, but will not be for F34, so we
-# make it explicit here.
-%define _lto_cflags -flto=auto -ffat-lto-objects
-
-autoreconf -vif
 %configure \
-  --sysconfdir=%{_sysconfdir}/%{name} \
+  --sysconfdir=%{_sysconfdir}/sysconfig/%{name} \
  --enable-libusb \
  --enable-drivers=all \
+  --enable-permissive-menu-goto \
  --enable-lcdproc-menus \
  --enable-stat-nfs \
  --enable-stat-smbfs \
-  --with-lcdport=13666 \
-  --with-pidfile-dir=/run
-%make_build
+  --with-lcdport=13666
+
+make %{?_smp_mflags}


 %install
-%make_install INSTALL="install -p"
-# remove non useful (and not "lcd" prefixed) perl example scripts
-rm $RPM_BUILD_ROOT%{_bindir}/fortune.pl
-rm $RPM_BUILD_ROOT%{_bindir}/iosock.pl
-rm $RPM_BUILD_ROOT%{_bindir}/tail.pl
-rm $RPM_BUILD_ROOT%{_bindir}/x11amp.pl
-
-# docs
+rm -rf $RPM_BUILD_ROOT __doc
+make install DESTDIR=$RPM_BUILD_ROOT INSTALL="install -p"
 make install-html-guides DESTDIR=$RPM_BUILD_ROOT INSTALL="install -p"
-rm $RPM_BUILD_ROOT%{_docdir}/%{name}/*-guide/*.proc
-install -pm 0644 CREDITS.md ChangeLog.md README.md \
-  $RPM_BUILD_ROOT%{_docdir}/%{name}
+
+# Fix docs
+mkdir -p __doc/developer-guide
+mkdir -p __doc/user-guide
+install -pm 0644 $RPM_BUILD_ROOT%{_datadir}/doc/lcdproc/user-guide/*  __doc/user-guide
+install -pm 0644 $RPM_BUILD_ROOT%{_datadir}/doc/lcdproc/developer-guide/*  __doc/developer-guide
+rm -rf $RPM_BUILD_ROOT%{_datadir}/doc

 # init
-install -d $RPM_BUILD_ROOT%{_unitdir}
-install -d $RPM_BUILD_ROOT%{_unitdir}/lcdproc.target.wants
-install -d $RPM_BUILD_ROOT%{_udevrulesdir}
-install -d $RPM_BUILD_ROOT%{_sysusersdir}
-install -pm 0644 %{SOURCE1}  $RPM_BUILD_ROOT%{_unitdir}
-install -pm 0644 %{SOURCE2}  $RPM_BUILD_ROOT%{_unitdir}
-install -pm 0644 %{SOURCE3}  $RPM_BUILD_ROOT%{_unitdir}
-install -pm 0644 %{SOURCE4}  $RPM_BUILD_ROOT%{_unitdir}
-install -pm 0755 %{SOURCE5}  $RPM_BUILD_ROOT%{_sbindir}/LCDd-hwdetect
-install -pm 0644 %{SOURCE6}  $RPM_BUILD_ROOT%{_udevrulesdir}
-install -pm 0644 %{SOURCE7}  $RPM_BUILD_ROOT%{_sysusersdir}/lcdproc.conf
-for i in lcdproc.service LCDd.service LCDd-hwdetect.service; do
-  ln -s ../$i $RPM_BUILD_ROOT%{_unitdir}/lcdproc.target.wants
-done
+install -d $RPM_BUILD_ROOT%{_initrddir}
+install -pm 0755 scripts/init-LCDd.rpm  $RPM_BUILD_ROOT%{_initrddir}/LCDd
+install -pm 0755 scripts/init-lcdproc.rpm  $RPM_BUILD_ROOT%{_initrddir}/lcdproc

 #Disable default configuration
 #Thoses are only provided as an example since ncurses isn't a suitable default configuration.
 for f in LCDd.conf lcdproc.conf ; do
-  mv $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/${f} \
-    $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/${f}.example
+mv $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/%{name}/${f} \
+  $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/%{name}/${f}.example
+touch $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/%{name}/${f}
 done




 %post
-%systemd_post LCDd.service lcdproc.service
+if [ $1 -eq 1 ]; then
+# Add init script but don't start it
+  /sbin/chkconfig --add LCDd
+  /sbin/chkconfig --add lcdproc ||:
+fi


 %preun
-%systemd_preun LCDd.service lcdproc.service
+if [ $1 -eq 0 ]; then
+# Disable driver on final removal
+  %{_initrddir}/lcdproc stop &>/dev/null
+  %{_initrddir}/LCDd stop &>/dev/null
+  /sbin/chkconfig --del lcdproc
+  /sbin/chkconfig --del LCDd  ||:
+fi


-%postun
-%systemd_postun_with_restart LCDd.service lcdproc.service
-
+%clean
+rm -rf $RPM_BUILD_ROOT __doc

 %files
-%doc %{_docdir}/%{name}
-%license COPYING
+%defattr(-,root,root,-)
+%doc README* INSTALL COPYING CREDITS TODO ChangeLog
+%doc __doc/*
 %{_bindir}/*
+%dir %{_libdir}/lcdproc
+%{_libdir}/lcdproc/*
 %{_sbindir}/*
-%{_libdir}/lcdproc/
 %{_mandir}/man?/*
-%dir %{_sysconfdir}/%{name}
-%config %{_sysconfdir}/%{name}/*.conf
-%config %{_sysconfdir}/%{name}/*.conf.example
-%{_unitdir}/*
-%{_udevrulesdir}/90-%{name}.rules
-%{_sysusersdir}/lcdproc.conf
+%dir %{_sysconfdir}/sysconfig/%{name}
+%ghost %{_sysconfdir}/sysconfig/%{name}/*.conf
+%config %{_sysconfdir}/sysconfig/%{name}/*.conf.example
+%{_initrddir}/LCDd
+%{_initrddir}/lcdproc


 %changelog
-* Thu Jul 24 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-26.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Tue Feb 11 2025 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5.9-25.20210209git5c21e8c
- Drop call to %sysusers_create_compat
-
-* Fri Jan 17 2025 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-24.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
-
-* Mon Jul 29 2024 Miroslav Suchý <msuchy@redhat.com> - 0.5.9-23.20210209git5c21e8c
- convert license to SPDX
-
-* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-22.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Thu Jan 25 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-21.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-20.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-19.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-18.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
-* Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-17.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
-
-* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-16.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
-
-* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-15.20210209git5c21e8c
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
-
-* Thu Apr 15 2021 Hans de Goede <hdegoede@redhat.com> - 0.5.9-14.20210209git5c21e8c
- Sync with latest upstream git
- Add support for LCD found on Logitech Z-10 speakers,
-  inc. autodetect by udev + automatic LCDd.conf generation by LCDd-hwdetect
- Fix Logitech G15 family devices requiring a manual restart of LCDd
-  after a unplug + replug
- Drop ghosting of /etc/lcdproc/*.conf files, these may contain user
-  modifications, so they should not be removed on package removal
- This also fixes lcdexec.conf and lcdvc.conf not being packaged
-
-* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5.9-13.20190625git781b311
- Rebuilt for updated systemd-rpm-macros
-  See https://pagure.io/fesco/issue/2583.
-
-* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-12.20190625git781b311
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
-
-* Tue Nov 24 21:06:08 GMT 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 0.5.9-11.20190625git781b311
- Build with libusb1
-
-* Thu Aug 20 2020 Jeff Law <law@redhat.com> - 0.5.9-10.20190625git781b311
- Re-enable LTO
-
-* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-9.20190625git781b311
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Tue Jul 14 2020 Jeff Law <law@redhat.com> - 0.5.9-8.20190625git781b311
- Disable LTO
-
-* Fri Mar 20 2020 Hans de Goede <hdegoede@redhat.com> - 0.5.9-7.20190625git781b311
- Drop svgalib support, svgalib is being dropped from the distro (rhbz#1814816)
-
-* Mon Feb 24 2020 Than Ngo <than@redhat.com> - 0.5.9-6.git
- Fixed FTBFS against gcc10
-
-* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-5.20190625git781b311
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
-
-* Fri Oct  4 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-4.20190625git781b311
- Replace Group=lcdd statement in LCDd.service with Group=nobody, LCDd does not
-  need a special group and it breaks starting LCDd (rhbz#1742994)
-
-* Thu Oct  3 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-3.20190625git781b311
- The patch adding the keycodes for LCD menu buttons on Logitech keyboards was
-  still pending upstream. The final version of the patch has changed the codes,
-  update LCDd-hwdetect.sh to use the new codes when writing out LCDd.conf
-
-* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.9-2.20190625git781b311
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
-
-* Thu Jul 04 2019 Hans de Goede <hdegoede@redhat.com> - 0.5.9-1.20190625git781b311
- Update to upstream 0.5.9 release + latest improvements from git
- Add support for Logitech MX5000, MX5500, G15, G15 V2 and G510 keyboards
- Add LCDd-hwdetect script automatically generating LCDd.conf for
-  USB gaming keyboards with LCD panels and LCD2USB devices
- Add udev-rules to call LCDd-hwdetect when there is no existing LCDd.conf
-  and to make LCDd and lcdproc hw-activated when using supported USB devices
-
-* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-14
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
-
-* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
-
-* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-12
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
-
-* Mon Aug 07 2017 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 0.5.7-11
- Remove unneeded BuildRequires: pth-devel
-
-* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
-
-* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
-
-* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
-
-* Thu Sep 29 2016 Nicolas Chauvet <kwizart@gmail.com> - 0.5.7-7
- Remove ControlGroup from services - rhbz#1324015
-
-* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 0.5.7-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
-
-* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
-
-* Sat Oct 04 2014 Dan Horák <dan[at]danny.cz> - 0.5.7-4
- update BR, libusbx-devel is brought in by libftdi-devel
-
-* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
-
-* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.7-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
-
-* Fri May 30 2014 Peter Robinson <pbrobinson@fedoraproject.org> 0.5.7-1
- Update to 0.5.7
- Build against libusbx and libftdi 1
- Cleanup spec
-
-* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.6-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
-
-* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 0.5.6-5
- Perl 5.18 rebuild
-
-* Sat Apr 27 2013 Nicolas Chauvet <kwizart@gmail.com> - 0.5.6-4
- Enable hardened build rhbz#955453
-
-* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.6-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
-
-* Mon Jan 07 2013 Dan Horák <dan[at]danny.cz> - 0.5.6-2
- update BR for s390(x)
-
-* Wed Jan 02 2013 Nicolas Chauvet <kwizart@gmail.com> - 0.5.6-1
- Update to 0.5.6
-
-* Wed Aug 29 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-6
- Add systemd macro - rbz#850181
-
-* Sun Jul 22 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-5
- Fix for rhbz#821270
-
-* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.5-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
-
-* Mon Feb 13 2012 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-3
- Convert to native systemd units
-
-* Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.5.5-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
-
 * Tue Nov 29 2011 Nicolas Chauvet <kwizart@gmail.com> - 0.5.5-1
 - Update to 5.5
 - Fix path of functions
--- a/lcdproc.sysusers
+++ b/lcdproc.sysusers
@ -1 +0,0 @@
-g lcdd -
--- a/lcdproc.target
+++ b/lcdproc.target
@ -1,3 +0,0 @@
-[Unit]
-Description=lcdproc Target
-StopWhenUnneeded=yes
--- a/2
+++ b/2
@ -1 +1 @@
-SHA512 (lcdproc-5c21e8c.tar.gz) = cc0f6622bfc76382306d1419b76e9d9d16740722bc29568559f4b022e0747a2edb3fece8d3f3d5871972b778290bc6178bd2de3919b6eae019505551e91f93cb
+c92d4529d36eeec6d9d6fd0a4aa3ec82  lcdproc-0.5.5.tar.gz