Resolves: FC-2889 - new upstream release 11.13.00

Signed-off-by: Josef Ridky <jridky@redhat.com>

.gitignore

@@ -18,3 +18,15 @@
 /netpbm-10.90.00.tar.xz
 /netpbm-10.92.00.tar.xz
 /netpbm-10.93.00.tar.xz
+/netpbm-10.94.05.tar.xz
+/netpbm-10.95.00.tar.xz
+/netpbm-10.96.00.tar.xz
+/netpbm-10.97.00.tar.xz
+/netpbm-10.99.00.tar.xz
+/netpbm-11.00.00.tar.xz
+/netpbm-11.01.00.tar.xz
+/netpbm-11.02.00.tar.xz
+/netpbm-11.09.00.tar.xz
+/netpbm-11.10.00.tar.xz
+/netpbm-11.12.00.tar.xz
+/netpbm-11.13.00.tar.xz

netpbm-CAN-2005-2471.patch

@@ -1,8 +1,7 @@
-diff --git a/converter/other/pstopnm.c b/converter/other/pstopnm.c
-index f534265..2ab48ab 100644
---- a/converter/other/pstopnm.c
-+++ b/converter/other/pstopnm.c
-@@ -896,11 +896,11 @@ execGhostscript(int               const inputPipeFd,
+diff -urNp a/converter/other/pstopnm.c b/converter/other/pstopnm.c
+--- a/converter/other/pstopnm.c	2025-02-04 10:47:27.857451432 +0100
++++ b/converter/other/pstopnm.c	2025-02-04 10:55:56.430470597 +0100
+@@ -896,11 +896,11 @@ execGhostscript(int               const
                     ghostscriptProg, arg0,
                     deviceopt, outfileopt, gopt, ropt, textalphabitsopt,
                     "-q", "-dNOPAUSE",
@@ -10,10 +9,9 @@ index f534265..2ab48ab 100644
 +                   "-dPARANOIDSAFER", "-");
      }
  
--    execl(ghostscriptProg, arg0, deviceopt, outfileopt, gopt, ropt, 
--	  textalphabitsopt, "-q", "-dNOPAUSE", "-dSAFER", "-", NULL);
-+    execl(ghostscriptProg, arg0, deviceopt, outfileopt, gopt, ropt, "-q",
-+          "-dNOPAUSE", "-dPARANOIDSAFER", "-", NULL);
+     execl(ghostscriptProg, arg0, deviceopt, outfileopt, gopt, ropt,
+-          textalphabitsopt, "-q", "-dNOPAUSE", "-dSAFER", "-", NULL);
++          "-q", "-dNOPAUSE", "-dPARANOIDSAFER", "-", NULL);
  
      pm_error("execl() of Ghostscript ('%s') failed, errno=%d (%s)",
               ghostscriptProg, errno, strerror(errno));

netpbm-c99.patch

@@ -0,0 +1,41 @@
+Remove the contents of libjasper_compat.c.  The assignment
+
+        *errorP  = errorP;
+
+is bogus because it creates a non-null value in *errorP even on
+success, and the caller expects a null pointer int his case.
+
+The source file is compiled, but not actually linked in, so this is
+only a problem because of the type error that fails the build.
+
+diff --git a/converter/other/jpeg2000/libjasper_compat.c b/converter/other/jpeg2000/libjasper_compat.c
+index 101820a321212dc6..e69de29bb2d1d643 100644
+--- a/converter/other/jpeg2000/libjasper_compat.c
++++ b/converter/other/jpeg2000/libjasper_compat.c
+@@ -1,26 +0,0 @@
+-#include "netpbm/nstring.h"
+-
+-#include "jasper/jasper.h"
+-#include "jasper/jas_image.h"
+-
+-#ifndef JAS_HAVE_PMJAS_IMAGE_DECODE
+-
+-void
+-pmjas_image_decode(jas_stream_t * const in,
+-                   int            const fmtArg,
+-                   const char *   const optstr,
+-                   jas_image_t ** const imagePP,
+-                   const char **  const errorP) {
+-
+-    jas_image_t * const jasperP = jas_image_decode(in, fmtArg, optstr);
+-
+-    if (jasperP) {
+-        *imagePP = jasperP;
+-        *errorP  = errorP;
+-    } else {
+-        pm_asprintf(errorP, "Failed.  Details may have been written to "
+-                    "Standard Error");
+-    }
+-}
+-
+-#endif

netpbm-cmuwtopbm.patch

@@ -1,21 +0,0 @@
-diff -up netpbm-10.61.01/converter/pbm/cmuwmtopbm.c.cmuwtopbmfix netpbm-10.61.01/converter/pbm/cmuwmtopbm.c
---- netpbm-10.61.01/converter/pbm/cmuwmtopbm.c.cmuwtopbmfix	2013-01-02 18:39:57.000000000 +0100
-+++ netpbm-10.61.01/converter/pbm/cmuwmtopbm.c	2013-01-03 05:41:36.024984241 +0100
-@@ -18,7 +18,7 @@
-    This program does not check the pad bits at the end of each row.
- */
- 
--
-+#include <stdint.h>
- #include "pbm.h"
- 
- /*--------------------------
-@@ -42,7 +42,7 @@ readCmuwmHeader(FILE *         const ifP
-         "CMU window manager header EOF / read error";
-     uint32_t const cmuwmMagic = 0xf10040bb;
- 
--    long l;
-+    uint32_t l;
-     short s;
-     int rc;
- 

netpbm-glibc.patch

@@ -1,9 +1,10 @@
---- netpbm-10.35/converter/other/pnmtotiffcmyk.c.glibc	2006-09-18 12:20:06.000000000 +0200
-+++ netpbm-10.35/converter/other/pnmtotiffcmyk.c	2007-08-23 09:18:30.000000000 +0200
-@@ -974,8 +974,8 @@ int main( int argc, char **argv ) {
+diff -urNp a/converter/other/pnmtotiffcmyk.c b/converter/other/pnmtotiffcmyk.c
+--- a/converter/other/pnmtotiffcmyk.c	2025-02-04 10:47:27.858451429 +0100
++++ b/converter/other/pnmtotiffcmyk.c	2025-02-04 11:04:46.118394226 +0100
+@@ -989,8 +989,8 @@ int main( int argc, char **argv ) {
  
    if ( (err = parseOpts( argc, argv, rt )) ) goto exit ;
-   
+ 
 -  if ( (err = rt->in->open( rt->in, rt )) ) goto exit ;
 -  if ( (err = rt->out->open( rt->out, rt )) ) goto exit ;
 +  if ( (err = (rt->in->open)( rt->in, rt )) ) goto exit ;

netpbm-pamtojpeg2k.patch

@@ -1,234 +1,7 @@
-diff --git a/converter/other/jpeg2000/pamtojpeg2k.c b/converter/other/jpeg2000/pamtojpeg2k.c
-index 4d73316..a53573f 100644
---- a/converter/other/jpeg2000/pamtojpeg2k.c
-+++ b/converter/other/jpeg2000/pamtojpeg2k.c
-@@ -98,7 +98,7 @@ parseCommandLine(int argc, char ** argv,
-     char * modeOpt;
- 
-     unsigned int option_def_index;
--
-+    
-     MALLOCARRAY_NOFAIL(option_def, 100);
- 
-     option_def_index = 0;   /* incremented by OPTENTRY */
-@@ -134,25 +134,25 @@ parseCommandLine(int argc, char ** argv,
-             &numrlvlsSpec,       0);
-     OPTENT3(0, "numgbits",     OPT_UINT,   &cmdlineP->numgbits,
-             &numgbitsSpec,       0);
--    OPTENT3(0, "nomct",        OPT_FLAG,   NULL,
-+    OPTENT3(0, "nomct",        OPT_FLAG,   NULL, 
-             &cmdlineP->nomct,    0);
--    OPTENT3(0, "sop",          OPT_FLAG,   NULL,
-+    OPTENT3(0, "sop",          OPT_FLAG,   NULL, 
-             &cmdlineP->sop,      0);
--    OPTENT3(0, "eph",          OPT_FLAG,   NULL,
-+    OPTENT3(0, "eph",          OPT_FLAG,   NULL, 
-             &cmdlineP->eph,      0);
--    OPTENT3(0, "lazy",         OPT_FLAG,   NULL,
-+    OPTENT3(0, "lazy",         OPT_FLAG,   NULL, 
-             &cmdlineP->lazy,     0);
--    OPTENT3(0, "termall",      OPT_FLAG,   NULL,
-+    OPTENT3(0, "termall",      OPT_FLAG,   NULL, 
-             &cmdlineP->termall,  0);
--    OPTENT3(0, "segsym",       OPT_FLAG,   NULL,
-+    OPTENT3(0, "segsym",       OPT_FLAG,   NULL, 
-             &cmdlineP->segsym,    0);
--    OPTENT3(0, "vcausal",      OPT_FLAG,   NULL,
-+    OPTENT3(0, "vcausal",      OPT_FLAG,   NULL, 
-             &cmdlineP->vcausal,   0);
--    OPTENT3(0, "pterm",        OPT_FLAG,   NULL,
-+    OPTENT3(0, "pterm",        OPT_FLAG,   NULL, 
-             &cmdlineP->pterm,     0);
--    OPTENT3(0, "resetprob",    OPT_FLAG,   NULL,
-+    OPTENT3(0, "resetprob",    OPT_FLAG,   NULL, 
-             &cmdlineP->resetprob, 0);
--    OPTENT3(0, "verbose",      OPT_FLAG,   NULL,
-+    OPTENT3(0, "verbose",      OPT_FLAG,   NULL, 
-             &cmdlineP->verbose,   0);
-     OPTENT3(0, "debuglevel",   OPT_UINT,   &cmdlineP->debuglevel,
-             &debuglevelSpec,      0);
-@@ -223,7 +223,7 @@ parseCommandLine(int argc, char ** argv,
-         cmdlineP->inputFilename = strdup("-");  /* he wants stdin */
-     else if (argc - 1 == 1)
-         cmdlineP->inputFilename = strdup(argv[1]);
--    else
-+    else 
-         pm_error("Too many arguments.  The only argument accepted\n"
-                  "is the input file specification");
- 
-@@ -232,7 +232,7 @@ parseCommandLine(int argc, char ** argv,
- 
- 
- static void
--createJasperRaster(struct pam *  const inpamP,
-+createJasperRaster(struct pam *  const inpamP, 
-                    jas_image_t * const jasperP) {
- /*----------------------------------------------------------------------------
-    Create the raster in the *jasperP object, reading the raster from the
-@@ -254,7 +254,7 @@ createJasperRaster(struct pam *  const inpamP,
-         if (matrix[plane] == NULL)
-             pm_error("Unable to create matrix for plane %u.  "
-                      "jas_matrix_create() failed.", plane);
--    }
-+    }   
-     tuplerow = pnm_allocpamrow(inpamP);
- 
-     jasperMaxval = pm_bitstomaxval(pm_maxvaltobits(inpamP->maxval));
-@@ -271,7 +271,7 @@ createJasperRaster(struct pam *  const inpamP,
-                 unsigned int jasperSample;
- 
-                 if (oddMaxval)
--                    jasperSample = tuplerow[col][plane] *
-+                    jasperSample = tuplerow[col][plane] * 
-                         jasperMaxval / inpamP->maxval;
-                 else
-                     jasperSample = tuplerow[col][plane];
-@@ -279,16 +279,16 @@ createJasperRaster(struct pam *  const inpamP,
-                 jas_matrix_set(matrix[plane], 0, col, jasperSample);
-             }
-         }
--        {
-+        { 
-             unsigned int plane;
- 
-             for (plane = 0; plane < inpamP->depth; ++plane) {
-                 int rc;
--                rc = jas_image_writecmpt(jasperP, plane, 0, row,
-+                rc = jas_image_writecmpt(jasperP, plane, 0, row, 
-                                          inpamP->width, 1,
-                                          matrix[plane]);
-                 if (rc != 0)
--                    pm_error("jas_image_writecmpt() of plane %u failed.",
-+                    pm_error("jas_image_writecmpt() of plane %u failed.", 
-                              plane);
-             }
-         }
-@@ -297,14 +297,14 @@ createJasperRaster(struct pam *  const inpamP,
-     pnm_freepamrow(tuplerow);
-     for (plane = 0; plane < inpamP->depth; ++plane)
-         jas_matrix_destroy(matrix[plane]);
--
-+    
-     free(matrix);
- }
- 
- 
- 
- static void
--createJasperImage(struct pam *   const inpamP,
-+createJasperImage(struct pam *   const inpamP, 
-                   jas_image_t ** const jasperPP) {
- 
- 	jas_image_cmptparm_t * cmptparms;
-@@ -322,7 +322,7 @@ createJasperImage(struct pam *   const inpamP,
-         cmptparms[plane].prec = pm_maxvaltobits(inpamP->maxval);
-         cmptparms[plane].sgnd = 0;
-     }
--    *jasperPP =
-+    *jasperPP = 
-         jas_image_create(inpamP->depth, cmptparms, JAS_CLRSPC_UNKNOWN);
-     if (*jasperPP == NULL)
-         pm_error("Unable to create jasper image structure.  "
-@@ -371,7 +371,7 @@ convertToJasperImage(struct pam *   const inpamP,
- 
- 
- static void
--writeJpc(jas_image_t *      const jasperP,
-+writeJpc(jas_image_t *      const jasperP, 
-          struct cmdlineInfo const cmdline,
-          FILE *             const ofP) {
- 
-@@ -383,8 +383,8 @@ writeJpc(jas_image_t *      const jasperP,
- 
-     /* Note: ilyrrates is a hack because we're too lazy to properly parse
-        command line options to get the information and then compose
--       a proper input to Jasper.  So the user can screw things up by
--       specifying garbage for the -ilyrrates option
-+       a proper input to Jasper.  So the user can screw things up by 
-+       specifying garbage for the -ilyrrates option 
-     */
-     if (strlen(cmdline.ilyrrates) > 0)
-         pm_asprintf(&ilyrratesOpt, "ilyrrates=%s", cmdline.ilyrrates);
-@@ -410,7 +410,7 @@ writeJpc(jas_image_t *      const jasperP,
-         */
-         rateOpt[0] = '\0';
-     }
--    pm_asprintf(&options,
-+    pm_asprintf(&options, 
-                 "imgareatlx=%u "
-                 "imgareatly=%u "
-                 "tilegrdtlx=%u "
-@@ -428,7 +428,7 @@ writeJpc(jas_image_t *      const jasperP,
-                 "numrlvls=%u "
-                 "numgbits=%u "
-                 "%s %s %s %s %s %s %s %s %s",
--
-+                
-                 cmdline.imgareatlx,
-                 cmdline.imgareatly,
-                 cmdline.tilegrdtlx,
-@@ -471,8 +471,8 @@ writeJpc(jas_image_t *      const jasperP,
-             pm_message("Using Jasper to encode to 'jpc' format with options "
-                        "'%s'", options);
- 
--        rc = jas_image_encode(jasperP, outStreamP,
--                              jas_image_strtofmt((char*)"jpc"),
-+        rc = jas_image_encode(jasperP, outStreamP, 
-+                              jas_image_strtofmt((char*)"jpc"), 
-                               (char *)options);
-         if (rc != 0)
-             pm_error("jas_image_encode() failed to encode the JPEG 2000 "
-@@ -484,11 +484,11 @@ writeJpc(jas_image_t *      const jasperP,
-         int rc;
- 
-         rc = jas_stream_close(outStreamP);
--
-+            
-         if (rc != 0)
-             pm_error("Failed to close output stream, "
-                      "jas_stream_close() rc = %d", rc);
--    }
-+    }                     
- 
- 	jas_image_clearfmts();
- 
-@@ -506,33 +506,31 @@ main(int argc, char **argv)
-     jas_image_t * jasperP;
- 
-     pnm_init(&argc, argv);
--
-+    
-     parseCommandLine(argc, argv, &cmdline);
--
--    {
-+    
-+    { 
-         int rc;
--
-+        
-         rc = jas_init();
-         if ( rc != 0 )
-             pm_error("Failed to initialize Jasper library.  "
-                      "jas_init() returns rc %d", rc );
-     }
--
-+    
-     jas_setdbglevel(cmdline.debuglevel);
--
-+    
-     ifP = pm_openr(cmdline.inputFilename);
--
-+    
-     pnm_readpaminit(ifP, &inpam, PAM_STRUCT_SIZE(tuple_type));
--
-+    
-     convertToJasperImage(&inpam, &jasperP);
--
-+    
-     writeJpc(jasperP, cmdline, stdout);
--
-+    
- 	jas_image_destroy(jasperP);
+diff -up netpbm-10.47.12/converter/other/jpeg2000/pamtojpeg2k.c.pamtojpeg2kfix netpbm-10.47.12/converter/other/jpeg2000/pamtojpeg2k.c
+--- netpbm-10.47.12/converter/other/jpeg2000/pamtojpeg2k.c.pamtojpeg2kfix	2010-04-27 15:47:10.000000000 +0200
++++ netpbm-10.47.12/converter/other/jpeg2000/pamtojpeg2k.c	2010-05-03 15:37:49.934269588 +0200
+@@ -532,7 +532,5 @@ main(int argc, char **argv)
  
      pm_close(ifP);
  

netpbm-ppmfadeusage.patch

@@ -1,57 +1,62 @@
-diff -urNp old/editor/ppmfade new/editor/ppmfade
---- old/editor/ppmfade	2017-11-01 11:47:49.869611402 +0100
-+++ new/editor/ppmfade	2017-11-01 11:53:25.524973342 +0100
-@@ -84,7 +84,7 @@ for ($n = 0; $n < @ARGV; $n++) {
-         if (-e $first_file) {
+diff -urNp a/editor/ppmfade b/editor/ppmfade
+--- a/editor/ppmfade	2025-02-04 10:47:27.812451607 +0100
++++ b/editor/ppmfade	2025-02-04 10:52:14.233336029 +0100
+@@ -99,6 +99,9 @@ sub commandLineArgs() {
+             $mode = 'BLOCK';
+         } elsif ($arg eq "-mix") {
+             $mode = 'MIX';
++        } elsif ($arg eq "-help" || $arg eq "--help" || $arg eq "-h") {
++            print STDERR ("ppmfade: Use 'man ppmfade' for help.\n");
++            exit 1;
          } else {
-             print "I can't find first file '$first_file'\n";
--            exit 20;
+             if (substr($arg, 0, 1) eq '-') {
+                    print STDERR ("Unknown option '$arg'.  " .
+@@ -109,13 +112,13 @@ sub commandLineArgs() {
+                 print STDERR ("There are no non-option arguments possible.  " .
+                               "You specified '$arg'\n");
+             }
+-            exit 100;
 +            exit 1;
          }
-     } elsif ($ARGV[$n] eq "-l") {
-         $n++;
-@@ -92,7 +92,7 @@ for ($n = 0; $n < @ARGV; $n++) {
-         if (-e $last_file) {
+     }
+ 
+     if (!defined($firstFileNm) && !defined($lastFileNm)) {
+         print STDERR ("You must specify -f or -l (or both)\n");
+-        exit 90;
++        exit 1
+     }
+ 
+     if (!defined($mode)) {
+@@ -142,7 +145,7 @@ sub imageDimensions($$) {
          } else {
-             print "I can't find last file '$last_file'\n";
--            exit 20;
-+            exit 1;
+             print STDERR
+                 ("Unrecognized results from pnmfile on $firstFileNm.\n");
+-            exit(50);
++            exit(1);
          }
-     } elsif ($ARGV[$n] eq "-base") {
-         $n++;
-@@ -113,9 +113,12 @@ for ($n = 0; $n < @ARGV; $n++) {
-         $mode = $BLOCK;
-     } elsif ("$ARGV[$n]" eq "-mix") {
-         $mode = $MIX;
-+    } elsif ($ARGV[$n] eq "-help" || $ARGV[$n] eq "--help" || $ARGV[$n] eq "-h") {
-+        print "ppmfade: Use 'man ppmfade' for help.\n";
-+        exit 1;
      } else {
-         print "Unknown argument: $ARGV[$n]\n";
--        exit 100;
-+        exit 1;
-     } 
- }
- #
-@@ -134,18 +137,18 @@ if ($first_file ne "undefined") {
-         $width = $1; $height = $2;
-     } else {
-         print("Unrecognized results from pnmfile on $first_file.\n");
--        exit(50);
-+        exit 1;
+         # $lastFileNm is defined
+@@ -151,7 +154,7 @@ sub imageDimensions($$) {
+         } else {
+             print STDERR
+                 ("Unrecognized results from pnmfile on $firstFileNm.\n");
+-            exit(50);
++            exit(1);
+         }
      }
- } elsif ($last_file ne "undefined") {
-     if ((`pnmfile $last_file` =~ m{\b(\d+)\sby\s(\d+)} )) { 
-         $width = $1; $height = $2;
-     } else {
-         print("Unrecognized results from pnmfile on $first_file.\n");
--        exit(50);
-+        exit 1;
-     }
- } else {
-     print("ppmfade:  You must specify -f or -l (or both)\n");
--    exit(90);
+     return $width, $height;
+@@ -436,12 +439,12 @@ my ($mode, $firstFileNm, $lastFileNm, $b
+ 
+ if (defined($firstFileNm) && !-e($firstFileNm)) {
+     print STDERR ("First file '$firstFileNm' does not exist\n");
+-    exit 20;
 +    exit 1;
  }
  
- print("Frames are " . $width . "W x " . $height . "H\n");
+ if (defined($lastFileNm) && !-e($lastFileNm)) {
+     print STDERR ("Last file '$lastFileNm' does not exist\n");
+-    exit 20;
++    exit 1;
+ }
+ 
+ my ($width, $height) = imageDimensions($firstFileNm, $lastFileNm);

netpbm-python3.patch

@@ -1,9 +1,28 @@
-diff -urNp old/buildtools/makeman new/buildtools/makeman
---- old/buildtools/makeman	2018-01-03 12:15:55.000000000 +0100
-+++ new/buildtools/makeman	2018-02-26 14:18:39.993760106 +0100
+diff --git a/buildtools/makeman b/buildtools/makeman
+index 196dbd0..d73ab76 100755
+--- a/buildtools/makeman
++++ b/buildtools/makeman
 @@ -1,4 +1,4 @@
 -#!/usr/bin/python
 +#!/usr/bin/python3
  #
  # makeman -- compile netpbm's stereotyped HTML to troff markup
  #
+diff --git a/buildtools/manpage.mk b/buildtools/manpage.mk
+index ef1a103..c1badb8 100644
+--- a/buildtools/manpage.mk
++++ b/buildtools/manpage.mk
+@@ -126,11 +126,11 @@ reportman:
+ # to standard error.
+ %.1 %.3 %.5: $(USERGUIDE)/%.html
+ 	@echo Converting $< to $@
+-	@python $(MAKEMAN) -d $(USERGUIDE) $(<F) 
++	@python3 $(MAKEMAN) -d $(USERGUIDE) $(<F)
+ 
+ netpbm.1: $(USERGUIDE)/index.html
+ 	@echo Converting $< to $@
+-	@python $(MAKEMAN) -d $(USERGUIDE) index.html
++	@python3 $(MAKEMAN) -d $(USERGUIDE) index.html
+ 	@mv index.1 netpbm.1
+ 
+ # Generate man pages

netpbm-security-scripts.patch

@@ -1,267 +0,0 @@
-diff --git a/editor/ppmfade b/editor/ppmfade
-index dcd7bf2..5091651 100755
---- a/editor/ppmfade
-+++ b/editor/ppmfade
-@@ -40,6 +40,7 @@ exec perl -w -x -S -- "$0" "$@"
- #
- ##############################################################################
- use strict;
-+use File::Temp "tempdir";
- 
- sub doVersionHack($) {
-     my ($argvR) = @_;
-@@ -149,20 +150,26 @@ if ($first_file ne "undefined") {
- 
- print("Frames are " . $width . "W x " . $height . "H\n");
- 
-+#
-+# We create a tmp-directory right here
-+#
-+my $tmpdir = tempdir("ppmfade.XXXXXX", CLEANUP => 1);
-+
-+
- if ($first_file eq "undefined") {
-     print "Fading from black to ";
--    system("ppmmake \\#000 $width $height >junk1$$.ppm");
-+    system("ppmmake \\#000 $width $height >$tmpdir/junk1$$.ppm");
- } else {
-     print "Fading from $first_file to ";
--    system("cp", $first_file, "junk1$$.ppm");
-+    system("cp", $first_file, "$tmpdir/junk1$$.ppm");
- }
- 
- if ($last_file eq "undefined") {
-     print "black.\n";
--    system("ppmmake \\#000 $width $height >junk2$$.ppm");
-+    system("ppmmake \\#000 $width $height >$tmpdir/junk2$$.ppm");
- } else {
-     print "$last_file\n";
--    system("cp", $last_file, "junk2$$.ppm");
-+    system("cp", $last_file, "$tmpdir/junk2$$.ppm");
- }
- 
- #
-@@ -170,14 +177,14 @@ if ($last_file eq "undefined") {
- #
- 
- # Here's what our temporary files are:
--#   junk1$$.ppm: The original (fade-from) image
--#   junk2$$.ppm: The target (fade-from) image
--#   junk3$$.ppm: The frame of the fade for the current iteration of the 
--#                the for loop.
--#   junk1a$$.ppm: If the fade involves a ppmmix sequence from one intermediate
--#                 image to another, this is the first frame of that 
--#                 sequence.
--#   junk2a$$.ppm: This is the last frame of the above-mentioned ppmmix sequence
-+#   $tmpdir/junk1$$.ppm: The original (fade-from) image
-+#   $tmpdir/junk2$$.ppm: The target (fade-from) image
-+#   $tmpdir/junk3$$.ppm: The frame of the fade for the current iteration of the 
-+#                	 the for loop.
-+#   $tmpdir/junk1a$$.ppm: If the fade involves a ppmmix sequence from one intermediate
-+#                         image to another, this is the first frame of that 
-+#                         sequence.
-+#   $tmpdir/junk2a$$.ppm: This is the last frame of the above-mentioned ppmmix sequence
- 
- my $i;    # Frame number
- for ($i = 1; $i <= $nframes; $i++) {
-@@ -185,147 +192,147 @@ for ($i = 1; $i <= $nframes; $i++) {
-     if ($mode eq $SPREAD) {
-         if ($i <= 10) {
-             my $n = $spline20[$i] * 100;
--            system("ppmspread $n junk1$$.ppm >junk3$$.ppm");
-+            system("ppmspread $n $tmpdir/junk1$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n;
-             $n = $spline20[$i] * 100;
--            system("ppmspread $n junk1$$.ppm >junk1a$$.ppm");
-+            system("ppmspread $n $tmpdir/junk1$$.ppm >$tmpdir/junk1a$$.ppm");
-             $n = (1-$spline20[$i-10]) * 100;
--            system("ppmspread $n junk2$$.ppm >junk2a$$.ppm");
-+            system("ppmspread $n $tmpdir/junk2$$.ppm >$tmpdir/junk2a$$.ppm");
-             $n = $spline10[$i-10];
--            system("ppmmix $n junk1a$$.ppm junk2a$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1a$$.ppm $tmpdir/junk2a$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = (1-$spline20[$i-10])*100;
--            system("ppmspread $n junk2$$.ppm >junk3$$.ppm");
-+            system("ppmspread $n $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-     } elsif ($mode eq $SHIFT) {
-         if ($i <= 10) {
-             my $n = $spline20[$i] * 100;
--            system("ppmshift $n junk1$$.ppm >junk3$$.ppm");
-+            system("ppmshift $n $tmpdir/junk1$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n;
-             $n = $spline20[$i] * 100;
--            system("ppmshift $n junk1$$.ppm >junk1a$$.ppm");
-+            system("ppmshift $n $tmpdir/junk1$$.ppm >$tmpdir/junk1a$$.ppm");
-             $n = (1-$spline20[$i-10])*100;
--            system("ppmshift $n junk2$$.ppm >junk2a$$.ppm");
-+            system("ppmshift $n $tmpdir/junk2$$.ppm >$tmpdir/junk2a$$.ppm");
-             $n = $spline10[$i-10];
--            system("ppmmix $n junk1a$$.ppm junk2a$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1a$$.ppm $tmpdir/junk2a$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = (1-$spline20[$i-10]) * 100;
--            system("ppmshift $n junk2$$.ppm >junk3$$.ppm");
-+            system("ppmshift $n $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-     } elsif ($mode eq $RELIEF) {
-         if ($i == 1) {
--            system("ppmrelief junk1$$.ppm >junk1r$$.ppm");
-+            system("ppmrelief $tmpdir/junk1$$.ppm >$tmpdir/junk1r$$.ppm");
-         }
-         if ($i <= 10) {
-             my $n = $spline10[$i];
--            system("ppmmix $n junk1$$.ppm junk1r$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1$$.ppm $tmpdir/junk1r$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n = $spline10[$i-10];
--            system("ppmmix $n junk1r$$.ppm junk2r$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1r$$.ppm $tmpdir/junk2r$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = $spline10[$i-20];
--            system("ppmmix $n junk2r$$.ppm junk2$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk2r$$.ppm $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-         if ($i == 10) {
--            system("ppmrelief junk2$$.ppm >junk2r$$.ppm");
-+            system("ppmrelief $tmpdir/junk2$$.ppm >$tmpdir/junk2r$$.ppm");
-         }
-     } elsif ($mode eq $OIL) {
-         if ($i == 1) {
--            system("ppmtopgm junk1$$.ppm | pgmoil >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk1o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk1$$.ppm | pgmoil >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk1o$$.ppm");
-         }
-         if ($i <= 10) {
-             my $n = $spline10[$i];
--            system("ppmmix $n junk1$$.ppm junk1o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1$$.ppm $tmpdir/junk1o$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n = $spline10[$i-10];
--            system("ppmmix $n junk1o$$.ppm junk2o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1o$$.ppm $tmpdir/junk2o$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = $spline10[$i-20];
--            system("ppmmix $n junk2o$$.ppm junk2$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk2o$$.ppm $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-         if ($i == 10) {
--            system("ppmtopgm junk2$$.ppm | pgmoil >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk2o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk2$$.ppm | pgmoil >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk2o$$.ppm");
-         }
-     } elsif ($mode eq $EDGE) {
-         if ($i == 1) {
--            system("ppmtopgm junk1$$.ppm | pgmedge >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk1o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk1$$.ppm | pgmedge >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk1o$$.ppm");
-         }
-         if ($i <= 10) {
-             my $n = $spline10[$i];
--            system("ppmmix $n junk1$$.ppm junk1o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1$$.ppm $tmpdir/junk1o$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n = $spline10[$i-10];
--            system("ppmmix $n junk1o$$.ppm junk2o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1o$$.ppm $tmpdir/junk2o$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = $spline10[$i-20];
--            system("ppmmix $n junk2o$$.ppm junk2$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk2o$$.ppm $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-         if ($i == 10) {
--            system("ppmtopgm junk2$$.ppm | pgmedge >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk2o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk2$$.ppm | pgmedge >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk2o$$.ppm");
-         } 
-     } elsif ($mode eq $BENTLEY) {
-         if ($i == 1) {
--            system("ppmtopgm junk1$$.ppm | pgmbentley >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk1o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk1$$.ppm | pgmbentley >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk1o$$.ppm");
-         }
-         if ($i <= 10) {
-             my $n = $spline10[$i];
--            system("ppmmix $n junk1$$.ppm junk1o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1$$.ppm $tmpdir/junk1o$$.ppm >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n = $spline10[$i-10];
--            system("ppmmix $n junk1o$$.ppm junk2o$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1o$$.ppm $tmpdir/junk2o$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = $spline10[$i-20];
--            system("ppmmix $n junk2o$$.ppm junk2$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk2o$$.ppm $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-         }
-         if ($i == 10) {
--            system("ppmtopgm junk2$$.ppm | pgmbentley >junko$$.ppm");
--            system("rgb3toppm junko$$.ppm junko$$.ppm junko$$.ppm " .
--                   ">junk2o$$.ppm");
-+            system("ppmtopgm $tmpdir/junk2$$.ppm | pgmbentley >$tmpdir/junko$$.ppm");
-+            system("rgb3toppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm $tmpdir/junko$$.ppm " .
-+                   ">$tmpdir/junk2o$$.ppm");
-         }
-     } elsif ($mode eq $BLOCK) {
-         if ($i <= 10) {
-             my $n = 1 - 1.9*$spline20[$i];
--            system("pamscale $n junk1$$.ppm | " .
--                   "pamscale -width $width -height $height >junk3$$.ppm");
-+            system("pamscale $n $tmpdir/junk1$$.ppm | " .
-+                   "pamscale -width $width -height $height >$tmpdir/junk3$$.ppm");
-         } elsif ($i <= 20) {
-             my $n = $spline10[$i-10];
--            system("ppmmix $n junk1a$$.ppm junk2a$$.ppm >junk3$$.ppm");
-+            system("ppmmix $n $tmpdir/junk1a$$.ppm $tmpdir/junk2a$$.ppm >$tmpdir/junk3$$.ppm");
-         } else {
-             my $n = 1 - 1.9*$spline20[31-$i];
--            system("pamscale $n junk2$$.ppm | " .
--                   "pamscale -width $width -height $height >junk3$$.ppm");
-+            system("pamscale $n $tmpdir/junk2$$.ppm | " .
-+                   "pamscale -width $width -height $height >$tmpdir/junk3$$.ppm");
-         }
-         if ($i == 10) {
--            system("cp", "junk3$$.ppm", "junk1a$$.ppm");
--            system("pamscale $n junk2$$.ppm | " .
--                   "pamscale -width $width -height $height >junk2a$$.ppm");
-+            system("cp", "$tmpdir/junk3$$.ppm", "$tmpdir/junk1a$$.ppm");
-+            system("pamscale $n $tmpdir/junk2$$.ppm | " .
-+                   "pamscale -width $width -height $height >$tmpdir/junk2a$$.ppm");
-         }    
-     } elsif ($mode eq $MIX) {
-         my $fade_factor = sqrt(1/($nframes-$i+1));
--        system("ppmmix $fade_factor junk1$$.ppm junk2$$.ppm >junk3$$.ppm");
-+        system("ppmmix $fade_factor $tmpdir/junk1$$.ppm $tmpdir/junk2$$.ppm >$tmpdir/junk3$$.ppm");
-     } else {
-         print("Internal error: impossible mode value '$mode'\n");
-     }
- 
-     my $outfile = sprintf("%s.%04d.ppm", $base_name, $i);
--    system("cp", "junk3$$.ppm", $outfile);
-+    system("cp", "$tmpdir/junk3$$.ppm", $outfile);
- }
- 
- #
- #  Clean up shop.
- #
--system("rm junk*$$.ppm");
-+system("rm $tmpdir/junk*$$.ppm");
- 
- exit(0);

netpbm-shlib-ldflags.patch

@@ -0,0 +1,13 @@
+diff --git a/config.mk.in b/config.mk.in
+index 50687ba..d35c982 100644
+--- a/config.mk.in
++++ b/config.mk.in
+@@ -250,7 +250,7 @@ EXE =
+ 
+ # Here, $(SONAME) resolves to the soname for the shared library being created.
+ # The following are gcc options.  This works on GNU libc systems.
+-LDSHLIB = -shared -Wl,-soname,$(SONAME)
++LDSHLIB = $(LDFLAGS) -shared -Wl,-soname,$(SONAME)
+ # You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
+ # ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
+ # documentation and doesn't exist in at least one non-BeOS installation.

netpbm-userguide.patch

@@ -1,150 +0,0 @@
-diff --git a/userguide/pammixmulti.html b/userguide/pammixmulti.html
-index 97cf412..d2a2ba0 100755
---- a/userguide/pammixmulti.html
-+++ b/userguide/pammixmulti.html
-@@ -2,13 +2,13 @@
- <html><head><title>Pammixmulti User Manual</title></head>
- <body>
- <h1>pammixmulti</h1>
--Updated: 18 November 2018<br>
--<br>
-+
-+Updated: 18 November 2018<br />
- <a href="#index">Table Of Contents</a>
-   
- 
--<h2>NAME</h2>
--<p>pammixmulti - blend together multiple PAM images
-+<h2 id="name">NAME</h2>
-+<p>pammixmulti - blend together multiple PAM images</p>
- 
- 
- <h2 id="synopsis">SYNOPSIS</h2>
-@@ -22,11 +22,11 @@ Updated: 18 November 2018<br>
- <p>Minimum unique abbreviation of an option is acceptable. You can use a
- single hyphen instead of double hyphens to denote options. You can use white
- space in place of the equals sign to separate an option name from its
--value.
-+value.</p>
- 
- 
- <h2 id="description">DESCRIPTION</h2>
--<p>This file is part of <a href="index.html">Netpbm</a>.
-+<p>This file is part of <a href="index.html">Netpbm</a>.</p>
- 
- <p><b>pammixmulti</b> mixes two or more images to produce a new image. The
- program provides multiple ways to interpret "mix."
-@@ -37,7 +37,7 @@ program provides multiple ways to interpret "mix."
- <p>In addition to the options common to all programs based on libnetpbm
- (most notably <b>-quiet</b>, see <a href="index.html#commonoptions">
- Common Options</a>), <b>pammixmulti</b> recognizes the following
--command line options:
-+command line options:</p>
- 
- <dl compact>
- <dt><b>--blend</b>=average|random|mask</dt>
-@@ -50,7 +50,7 @@ output is produced by selecting the corresponding pixel from one of the input
- images, chosen at random on a per-pixel basis.  With
- <b>--blend</b>=<code>mask</code>, each pixel in the output is produced by a
- weighted average of the corresponding pixels from all the input images based
--on the grayscale level of an additional mask image.
-+on the grayscale level of an additional mask image.</p>
- </dd>
- 
- <dt><b>--maskfile</b>=<i>filename</i></dt>
-@@ -60,7 +60,7 @@ grayscale mask file to control the blending of each pixel.  (If the file is
- not grayscale, the first channel is treated as gray).  Where the mask file is
- black, the first image is selected. Where the mask file is white, the last
- image is selected.  Intermediate levels of gray select intermediate
--images.
-+images.</p>
- </dd>
- 
- <dt><b>--stdev</b>=<i>number</i></dt>
-@@ -77,7 +77,7 @@ that includes roughly equal amounts of the corresponding pixel from images 1
- and 2 but less of the corresponding pixel from image 3.  As <i>number</i>
- tends towards the number of input images (going beyond that has diminishing
- impact), the output tends to look more
--like <b>--blend</b>=average. <i>number</i> defaults to 0.25.
-+like <b>--blend</b>=average. <i>number</i> defaults to 0.25.</p>
- </dd>
- 
- <dt><b>--randomseed</b> <i>integer</i>
-@@ -91,39 +91,39 @@ like <b>--blend</b>=average. <i>number</i> defaults to 0.25.
- 
- <h2 id="arguments">ARGUMENTS</h2>
- 
--<p>You supply the names of the files to mix as non-option arguments.
-+<p>You supply the names of the files to mix as non-option arguments.</p>
- 
- 
- <h2 id="examples">EXAMPLES</h2>
- 
--<p>Average a bunch of PPM images to produce a new PAM image:
-+<p>Average a bunch of PPM images to produce a new PAM image:</p>
- <pre><code>
-     pammixmulti input*.ppm &gt;output.ppm
- </code></pre>
- 
- <p>Mix these same images by taking each pixel from a randomly selected input
--image:
-+image:</p>
- 
- <pre><code>
-     pammixmulti --blend=random input*.ppm &gt;output.ppm
- </code></pre>
- 
- <p>Use a mask image to control the fading among input images on a
--pixel-by-pixel basis:
-+pixel-by-pixel basis:</p>
- 
- <pre><code>
-     pammixmulti --blend=mask --maskfile=mask.pgm &gt;output.pam \
-        one.pam two.pam three.pam four.pam
- </code></pre>
- 
--<p>Do the same but with more abrupt transitions:
-+<p>Do the same but with more abrupt transitions:</p>
- 
- <pre><code>
-     pammixmulti --blend=mask --maskfile=mask.pgm --stdev=0.0 &gt;output.pam \
-        one.pam two.pam three.pam four.pam
- </code></pre>
- 
--<p>and now with more gradual transitions:
-+<p>and now with more gradual transitions:</p>
- 
- <pre><code>
-     pammixmulti --blend=mask --maskfile=mask.pgm --stdev=1.0 &gt;output.pam \
-@@ -138,7 +138,7 @@ pixel-by-pixel basis:
- 
- <h2 id="author">AUTHOR</h2>
- 
--<p>Copyright 2018 Scott Pakin, scott+pbm@pakin.org.
-+<p>Copyright 2018 Scott Pakin, scott+pbm@pakin.org.</p>
- 
- <h2 id="seealso">SEE ALSO</h2>
- 
-@@ -152,14 +152,14 @@ pixel-by-pixel basis:
- <h2 id="index">Table Of Contents</h2>
- 
- <ul>
--<li><a href="#synopsis">SYNOPSIS</a>
--<li><a href="#description">DESCRIPTION</a>
--<li><a href="#options">OPTIONS</a>
--<li><a href="#arguments">ARGUMENTS</a>
--<li><a href="#examples">EXAMPLES</a>
--<li><a href="#history">HISTORY</a>
--<li><a href="#author">AUTHOR</a>
--<li><a href="#seealso">SEE ALSO</a>
-+<li><a href="#synopsis">SYNOPSIS</a></li>
-+<li><a href="#description">DESCRIPTION</a></li>
-+<li><a href="#options">OPTIONS</a></li>
-+<li><a href="#arguments">ARGUMENTS</a></li>
-+<li><a href="#examples">EXAMPLES</a></li>
-+<li><a href="#history">HISTORY</a></li>
-+<li><a href="#author">AUTHOR</a></li>
-+<li><a href="#seealso">SEE ALSO</a></li>
- </ul>
- 
- </body>

netpbm.spec

@@ -1,9 +1,9 @@
 Summary:         A library for handling different graphics file formats
 Name:            netpbm
-Version:         10.93.00
+Version:         11.13.00
 Release:         1%{?dist}
 # See copyright_summary for details
-License:         BSD and GPLv2 and IJG and MIT and Public Domain
+License:         BSD-3-Clause AND GPL-2.0-only AND LGPL-2.1-or-later AND GPL-3.0-or-later AND IJG AND MIT AND NTP AND PostgreSQL AND LicenseRef-MIT-CRL-Xim AND LicenseRef-Fedora-Public-Domain
 URL: http://netpbm.sourceforge.net/
 # Source0 is prepared by
 # svn checkout https://svn.code.sf.net/p/netpbm/code/advanced netpbm-%%{version}
@@ -11,7 +11,6 @@ URL: http://netpbm.sourceforge.net/
 # svn checkout https://svn.code.sf.net/p/netpbm/code/trunk/test netpbm-%%{version}/test
 # and removing the .svn directories ( find -name "\.svn" -type d -print0 | xargs -0 rm -rf )
 Source0:         netpbm-%{version}.tar.xz
-Patch0:          netpbm-security-scripts.patch
 Patch1:          netpbm-security-code.patch
 Patch2:          netpbm-ppmfadeusage.patch
 Patch3:          netpbm-CVE-2017-2587.patch
@@ -24,15 +23,14 @@ Patch9:          netpbm-xwdfix.patch
 Patch10:         netpbm-multilib.patch
 Patch11:         netpbm-glibc.patch
 Patch12:         netpbm-docfix.patch
-Patch13:         netpbm-cmuwtopbm.patch
-Patch14:         netpbm-pamtojpeg2k.patch
-Patch15:         netpbm-manfix.patch
-Patch16:         netpbm-manual-pages.patch
-Patch17:         netpbm-jasper.patch
-Patch18:	 netpbm-userguide.patch
-Patch19:	 netpbm-libdir-so.patch
+Patch13:         netpbm-pamtojpeg2k.patch
+Patch14:         netpbm-manfix.patch
+Patch15:         netpbm-jasper.patch
+Patch16:         netpbm-libdir-so.patch
+Patch17:         netpbm-c99.patch
+Patch18:         netpbm-shlib-ldflags.patch
 
-BuildRequires: make
+BuildRequires:   make
 BuildRequires:   libjpeg-devel, libpng-devel, libtiff-devel, flex, gcc, jbigkit-devel
 BuildRequires:   libX11-devel, perl-generators, python3, jasper-devel, libxml2-devel
 BuildRequires:   perl(Config), perl(Cwd), perl(English), perl(Fcntl), perl(File::Basename)
@@ -94,6 +92,7 @@ rm -rf converter/other/jpeg2000/libjasper/
 rm -rf converter/other/jbig/libjbig/
 
 %build
+%set_build_flags
 ./configure <<EOF
 
 
@@ -120,19 +119,19 @@ TOP=`pwd`
 
 make \
 	CC="%{__cc}" \
-	LDFLAGS="$RPM_LD_FLAGS -L$TOP/pbm -L$TOP/pgm -L$TOP/pnm -L$TOP/ppm" \
-	CFLAGS="$RPM_OPT_FLAGS -fPIC -flax-vector-conversions -fno-strict-aliasing" \
-	CFLAGS_CONFIG="$RPM_OPT_FLAGS" \
+	LDFLAGS="$LDFLAGS -L$TOP/pbm -L$TOP/pgm -L$TOP/pnm -L$TOP/ppm" \
+	CFLAGS="$CFLAGS -fPIC -flax-vector-conversions -fno-strict-aliasing" \
+	CFLAGS_CONFIG="$CFLAGS" \
 	LADD="-lm" \
-	JPEGINC_DIR=%{_includedir} \
-	PNGINC_DIR=%{_includedir} \
-	TIFFINC_DIR=%{_includedir} \
-	JPEGLIB_DIR=%{_libdir} \
-	JBIGLIB=%{_libdir}/libjbig.so.2.1 \
-	PNGLIB_DIR=%{_libdir} \
-	TIFFLIB_DIR=%{_libdir} \
+	JPEGINC_DIR=%{_usr}/include \
+	PNGINC_DIR=%{_usr}/include \
+	TIFFINC_DIR=%{_usr}/include \
+	JPEGLIB_DIR=%{_usr}/%{_lib} \
+	JBIGLIB=%{_usr}/%{_lib}/libjbig.so.2.1 \
+	PNGLIB_DIR=%{_usr}/%{_lib} \
+	TIFFLIB_DIR=%{_usr}/%{_lib} \
 	LINUXSVGALIB="NONE" \
-	X11LIB=%{_libdir}/libX11.so \
+	X11LIB=%{_usr}/%{_lib}/libX11.so \
 	XML2LIBS="NONE"
 
 # prepare man files
@@ -150,12 +149,12 @@ done
 
 
 %install
-make package pkgdir=%{buildroot}/usr LINUXSVGALIB="NONE" XML2LIBS="NONE"
+make package pkgdir=%{buildroot}%{_prefix} LINUXSVGALIB="NONE" XML2LIBS="NONE"
 
 # Ugly hack to have libs in correct dir on 64bit archs.
 mkdir -p %{buildroot}%{_libdir}
-if [ "%{_libdir}" != "/usr/lib" ]; then
-  mv %{buildroot}/usr/lib/lib* %{buildroot}%{_libdir}
+if [ "%{_lib}" != "lib" ]; then
+  mv %{buildroot}%{_prefix}/lib/lib* %{buildroot}%{_libdir}
 fi
 
 cp -af lib/libnetpbm.a %{buildroot}%{_libdir}/libnetpbm.a
@@ -177,16 +176,16 @@ done
 rm -f %{buildroot}%{_mandir}/man5/extendedopacity.5
 
 mkdir -p %{buildroot}%{_datadir}/netpbm
-mv %{buildroot}/usr/misc/*.map %{buildroot}%{_datadir}/netpbm/
-mv %{buildroot}/usr/misc/rgb.txt %{buildroot}%{_datadir}/netpbm/
-rm -rf %{buildroot}/usr/README
-rm -rf %{buildroot}/usr/VERSION
-rm -rf %{buildroot}/usr/link
-rm -rf %{buildroot}/usr/misc
-rm -rf %{buildroot}/usr/man
-rm -rf %{buildroot}/usr/pkginfo
-rm -rf %{buildroot}/usr/config_template
-rm -rf %{buildroot}/usr/pkgconfig_template
+mv %{buildroot}%{_prefix}/misc/*.map %{buildroot}%{_datadir}/netpbm/
+mv %{buildroot}%{_prefix}/misc/rgb.txt %{buildroot}%{_datadir}/netpbm/
+rm -rf %{buildroot}%{_prefix}/README
+rm -rf %{buildroot}%{_prefix}/VERSION
+rm -rf %{buildroot}%{_prefix}/link
+rm -rf %{buildroot}%{_prefix}/misc
+rm -rf %{buildroot}%{_prefix}/man
+rm -rf %{buildroot}%{_prefix}/pkginfo
+rm -rf %{buildroot}%{_prefix}/config_template
+rm -rf %{buildroot}%{_prefix}/pkgconfig_template
 
 # Don't ship the static library
 rm -f %{buildroot}%{_libdir}/lib*.a
@@ -230,6 +229,100 @@ popd
 %doc userguide/*
 
 %changelog
+* Thu Jan 08 2026 Josef Ridky <jridky@redhat.com> - 11.13.00-1
+- New upstream release 11.13.00
+
+* Tue Oct 14 2025 Josef Ridky <jridky@redhat.com> - 11.12.00-1
+- New upstream release 11.12.00
+
+* Thu Jul 24 2025 Fedora Release Engineering <releng@fedoraproject.org> - 11.10.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Tue Apr 08 2025 Josef Ridky <jridky@redhat.com> - 11.10.00-1
+- New upstream release 11.10.00 (#2355869)
+
+* Thu Feb 06 2025 Josef Ridky <jridky@redhat.com> - 11.09.00-2
+- add LDFLAGS patch (RHEL-70899)
+
+* Tue Jan 28 2025 Josef Ridky <jridky@redhat.com> - 11.09.00-1
+- New upstream release 11.09.00 (#2218312)
+- Review and update license field
+
+* Fri Jan 17 2025 Fedora Release Engineering <releng@fedoraproject.org> - 11.02.00-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Fri Dec 13 2024 Lukáš Zaoral <lzaoral@redhat.com> - 11.02.00-9
+- build netpbm with correct LDFLAGS (RHEL-70899)
+
+* Mon Sep 02 2024 Miroslav Suchý <msuchy@redhat.com> - 11.02.00-8
+- convert license to SPDX
+
+* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 11.02.00-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Thu Jan 25 2024 Fedora Release Engineering <releng@fedoraproject.org> - 11.02.00-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Sun Jan 21 2024 Florian Weimer <fweimer@redhat.com> - 11.02.00-5
+- GCC 14 compatibility fixes:
+  Drop netpbm-cmuwtopbm.patch to fix an out-of-bounds stack write (#2259450)
+  Stub out unused converter/other/jpeg2000/libjasper_compat.c (#2259448)
+
+* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 11.02.00-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Tue Nov 28 2023 Orion Poplawski <orion@nwra.com> - 11.02.00-3
+- Rebuild for jasper 4.1
+
+* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 11.02.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Mon Mar 27 2023 Josef Ridky <jridky@redhat.com> - 11.02.00-1
+- New upstream release 11.02.00 (#2157125)
+
+* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 11.01.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Mon Jan 02 2023 Josef Ridky <jridky@redhat.com> - 11.01.00-1
+- New upstream release 11.01.00 (#2157125)
+
+* Fri Dec 02 2022 Florian Weimer <fweimer@redhat.com> - 11.00.00-2
+- Port downstream-specific patches to C99
+
+* Tue Oct 04 2022 Josef Ridky <jridky@redhat.com> - 11.00.00-1
+- New upstream release 11.00.00 (#2130384)
+
+* Fri Jul 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 10.99.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Tue Jun 28 2022 Josef Ridky <jridky@redhat.com> - 10.99.00-1
+- New upstream release 10.99.00 (#2068865)
+- Use %%set_build_flags to set environment variables
+
+* Sun Feb 13 2022 Josef Ridky <jridky@redhat.com> - 10.97.00-4
+- Bump spec for new jasper
+
+* Fri Feb 11 2022 Josef Ridky <jridky@redhat.com> - 10.97.00-3
+- Rebuild for new jasper
+ 
+* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 10.97.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Mon Jan 03 2022 Josef Ridky <jridky@redhat.com> - 10.97.00-1
+- New upstream release 10.97.00 (#2035806)
+
+* Mon Oct 04 2021 Josef Ridky <jridky@redhat.com> - 10.96.00-1
+- New upstream release 10.96.00 (#2007871)
+
+* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 10.95.00-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Thu Jul 15 2021 Josef Ridky <jridky@redhat.com> - 10.95.00-1
+- New upstream release 10.95.00 (#1977974)
+
+* Wed Mar 31 2021 Josef Ridky <jridky@redhat.com> - 10.94.05-1
+- New upstream release 10.94.05 (#1943837)
+
 * Mon Jan 25 2021 Josef Ridky <jridky@redhat.com> - 10.93.00-1
 - New upstream release 10.93.00 (#1911159)
 

sources

@@ -1 +1 @@
-SHA512 (netpbm-10.93.00.tar.xz) = 18ff08b1d3672d792dab78b69eb4ef1a9874266b1dfbf5801a53ca172c0dcbbae8d1269297a56e06ed45ccfdff6a6ae5399e60b4bafdcb9d2cb9de800e2bc07c
+SHA512 (netpbm-11.13.00.tar.xz) = 0914061c7c8d638147afb76cbf23609b3ae43aca4120e4297fd5db6887d5381469d6944cdbdc1c66d26f54ec68d62355693c08b830dde823061e37c51480b678