Update to 1.4.0 upstream release

- Resolves: rhbz#2427015 Upstream tag: 1.4.0 Upstream commit: 5f5ac6fe Commit authored by Packit automation (https://packit.dev/)
Merge #26 Update ocserv-genkey
2026-01-04 15:15:35 +00:00 · 2025-08-16 14:31:39 +00:00 · 2025-07-24 23:23:30 +00:00 · 2025-07-23 11:13:11 +00:00 · 2025-05-18 07:09:54 -04:00 · 2025-02-11 15:53:26 +01:00
14 changed files with 1683 additions and 0 deletions
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1,253 @@
+/ocserv-0.2.1.tar.xz
+/ocserv-0.2.3.tar.xz
+/ocserv-0.3.0.tar.xz
+/ocserv-0.3.1.tar.xz
+/ocserv-0.3.2.tar.xz
+/ocserv-0.3.3.tar.xz
+/ocserv-0.3.4.tar.xz
+/ocserv-0.3.5.tar.xz
+/ocserv-0.8.0pre0.tar.xz
+/ocserv-0.8.0pre0.tar.xz.sig
+/ocserv-0.8.0.tar.xz
+/ocserv-0.8.0.tar.xz.sig
+/ocserv-0.8.1.tar.xz
+/ocserv-0.8.1.tar.xz.sig
+/ocserv-0.8.2.tar.xz
+/ocserv-0.8.2.tar.xz.sig
+/ocserv-0.8.4.tar.xz
+/ocserv-0.8.4.tar.xz.sig
+/ocserv-0.8.7.tar.xz.sig
+/ocserv-0.8.7.tar.xz
+/ocserv-0.8.8.tar.xz.sig
+/ocserv-0.8.8.tar.xz
+/ocserv-0.8.9.tar.xz.sig
+/ocserv-0.8.9.tar.xz
+/ocserv-0.10.2.tar.xz
+/ocserv-0.10.2.tar.xz.sig
+/ocserv-0.10.6.tar.xz
+/ocserv-0.10.6.tar.xz.sig
+/ocserv-0.10.7.tar.xz.sig
+/ocserv-0.10.7.tar.xz
+/ocserv-0.10.8.tar.xz.sig
+/ocserv-0.10.8.tar.xz
+/ocserv-0.10.9.tar.xz.sig
+/ocserv-0.10.9.tar.xz
+/ocserv-0.10.10.tar.xz.sig
+/ocserv-0.10.10.tar.xz
+/ocserv-0.10.11.tar.xz.sig
+/ocserv-0.10.11.tar.xz
+/ocserv-0.11.0.tar.xz
+/ocserv-0.11.0.tar.xz.sig
+/ocserv-0.11.1.tar.xz.sig
+/ocserv-0.11.1.tar.xz
+/ocserv-0.11.2.tar.xz
+/ocserv-0.11.2.tar.xz.sig
+/ocserv-0.11.3.tar.xz
+/ocserv-0.11.3.tar.xz.sig
+/ocserv-0.11.4.tar.xz
+/ocserv-0.11.4.tar.xz.sig
+/ocserv-0.11.5.tar.xz
+/ocserv-0.11.5.tar.xz.sig
+/ocserv-0.11.6.tar.xz
+/ocserv-0.11.6.tar.xz.sig
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.7.tar.xz.sig
+/ocserv-0.11.7.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.8.tar.xz.sig
+/ocserv-0.11.8.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.9.tar.xz.sig
+/ocserv-0.11.9.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.9.tar.xz.sig
+/ocserv-0.11.9.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.10.tar.xz.sig
+/ocserv-0.11.10.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.11.tar.xz.sig
+/ocserv-0.11.11.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.11.11.tar.xz.sig
+/ocserv-0.11.11.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.0.tar.xz.sig
+/ocserv-0.12.0.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.1.tar.xz.sig
+/ocserv-0.12.1.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.2.tar.xz.sig
+/ocserv-0.12.2.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.3.tar.xz.sig
+/ocserv-0.12.3.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.4.tar.xz.sig
+/ocserv-0.12.4.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.5.tar.xz.sig
+/ocserv-0.12.5.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-0.12.6.tar.xz.sig
+/ocserv-0.12.6.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-1.0.0.tar.xz.sig
+/ocserv-1.0.0.tar.xz
+/ocserv.init
+/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+/ocserv-script
+/ocserv-genkey
+/PACKAGE-LICENSING
+/ocserv-pamd.conf
+/ocserv.service
+/ocserv.conf
+/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+/ocserv-1.0.1.tar.xz.sig
+/ocserv-1.0.1.tar.xz
+/ocserv-1.1.0.tar.xz
+/ocserv-1.1.0.tar.xz.sig
+/ocserv-1.1.1.tar.xz
+/ocserv-1.1.1.tar.xz.sig
+/ocserv-1.1.2.tar.xz
+/ocserv-1.1.2.tar.xz.sig
+/ocserv-1.1.3.tar.xz
+/ocserv-1.1.3.tar.xz.sig
+/ocserv-1.1.4.tar.xz
+/ocserv-1.1.4.tar.xz.sig
+/ocserv-1.1.6.tar.xz.sig
+/ocserv-1.1.6.tar.xz
+/ocserv-1.1.7.tar.xz
+/ocserv-1.1.7.tar.xz.sig
+/ocserv-1.2.0.tar.xz
+/ocserv-1.2.0.tar.xz.sig
+/ocserv-1.2.1.tar.xz
+/ocserv-1.2.1.tar.xz.sig
+/ocserv-1.2.2.tar.xz
+/ocserv-1.2.2.tar.xz.sig
+/ocserv-1.2.4.tar.xz
+/ocserv-1.2.4.tar.xz.sig
+/ocserv-1.3.0.tar.xz
+/ocserv-1.3.0.tar.xz.sig
+/ocserv-1.4.0.tar.xz
+/ocserv-1.4.0.tar.xz.sig
--- a/.packit.yaml
+++ b/.packit.yaml
@ -0,0 +1,26 @@
+upstream_project_url: https://gitlab.com/openconnect/ocserv
+issue_repository: https://gitlab.com/openconnect/ocserv
+copy_upstream_release_description: true
+downstream_package_name: ocserv
+
+jobs:
+- job: pull_from_upstream
+  trigger: release
+  dist_git_branches:
+    - fedora-all
+    - epel-8
+    - epel-9
+
+- job: koji_build
+  trigger: commit
+  dist_git_branches:
+    - fedora-all
+    - epel-8
+    - epel-9
+
+- job: bodhi_update
+  trigger: commit
+  dist_git_branches:
+    - fedora-branched # rawhide updates are created automatically
+    - epel-8
+    - epel-9
--- a/148
+++ b/148
@ -0,0 +1,148 @@
+Note that ocserv contains components under different (but compatible) licenses. 
+A breakdown of those is given below.
+
+GPL (v2 or later)
+-----------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/common.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/config.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/cookies.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/html.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ip-lease.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/log.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-auth.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-config.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-misc.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-resume.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-user.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ocpasswd.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/pam.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/plain.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/route-add.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/sec-mod.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/setproctitle.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/system.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/tlslib.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/tun.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-auth.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-bandwidth.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-extras.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-misc.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-privs.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-resume.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-tun.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-vpn.c
+
+# Note that these files were marked as GPLv3 or later by the gnulib-tool,
+# but this is a bug: http://lists.gnu.org/archive/html/bug-gnulib/2013-11/msg00062.html
+GPL (v2 or later)
+-----------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/build-aux/snippet/arg-nonnull.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/build-aux/snippet/c++defs.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/build-aux/snippet/warn-on-use.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/build-aux/snippet/_Noreturn.h
+
+
+BSD (3 clause) and GPL (v2 or later)
+--------------------------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/icmp-ping.c
+
+
+LGPL (v2.1 or later)
+--------------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/memchr.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/c-ctype.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/c-ctype.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/c-strcase.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/c-strcasecmp.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/c-strncasecmp.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/cloexec.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/cloexec.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/close.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/dup2.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/errno.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fcntl.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fcntl.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fd-hook.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fd-hook.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fseek.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fseeko.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/fstat.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/getdelim.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/getdtablesize.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/getline.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/getpass.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/getpass.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/lseek.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/malloc.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/memmem.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/minmax.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/msvc-inval.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/msvc-inval.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/msvc-nothrow.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/msvc-nothrow.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/realloc.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stdbool.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stddef.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stdint.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stdio-impl.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stdio.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/stdlib.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/str-two-way.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/strdup.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/string.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/sys_stat.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/sys_types.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/time.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/unistd.in.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/common.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/cookies.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/gettime.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/html.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/icmp-ping.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ip-lease.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ipc.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main-auth.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/main.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/pam.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/plain.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/route-add.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/script-list.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/sec-mod.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/setproctitle.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/str.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/str.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/system.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/tlslib.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/tun.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/vpn.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker-bandwidth.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/worker.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/htable/htable.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/htable/htable.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/htable/htable_type.h
+
+
+CC0 (public domain)
+--------------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/build_assert/build_assert.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/container_of/container_of.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/check_type/check_type.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/hash/hash.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/hash/hash.h
+
+
+MIT
+--------------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/list/list.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ccan/list/list.h
+
+
+Auto-generated files
+--------------------
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/gl/unistd.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ocpasswd-args.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ocpasswd-args.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ocserv-args.c
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/ocserv-args.h
+/var/lib/mock/fedora-rawhide-i386/root/builddir/build/BUILD/ocserv-0.2.1/src/version.inc
--- a/README.packit
+++ b/README.packit
@ -0,0 +1,3 @@
+This repository is maintained by packit.
+https://packit.dev/
+The file was generated using packit 1.13.0.post1.dev2+g84134016c.
--- a/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+++ b/gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
--- a/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+++ b/gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
--- a/49
+++ b/49
@ -0,0 +1,49 @@
+#!/bin/sh
+#default key type:rsa
+KEY_TYPE="rsa"
+
+#check key type 'rsa', 'rsa-pss', 'dsa', 'ecdsa', 'ed25519, 'ed448', 'x25519', and 'x448'
+if [ $# -gt 0 ]; then
+    case "$1" in
+        rsa|rsa-pss|dsa|ecdsa|ed25519|ed448|x25519|x448)
+            KEY_TYPE="$1"
+            ;;
+        *)
+            echo "Usage: $0 [rsa|rsa-pss|dsa|ecdsa|ed25519|ed448|x25519|x448]"
+            echo "Default key type: rsa"
+            exit 1
+            ;;
+    esac
+fi
+
+#generate CA certificate/key
+if test ! -f /etc/pki/ocserv/private/ca.key;then
+mkdir -p /etc/pki/ocserv/private
+certtool --generate-privkey --key-type=$KEY_TYPE --outfile /etc/pki/ocserv/private/ca.key >/dev/null 2>&1
+echo "cn=`hostname -f` CA" >/etc/pki/ocserv/ca.tmpl
+echo "expiration_days=-1" >>/etc/pki/ocserv/ca.tmpl
+echo "serial=1" >>/etc/pki/ocserv/ca.tmpl
+echo "ca" >>/etc/pki/ocserv/ca.tmpl
+echo "cert_signing_key" >>/etc/pki/ocserv/ca.tmpl
+certtool --template /etc/pki/ocserv/ca.tmpl \
+	--generate-self-signed --load-privkey /etc/pki/ocserv/private/ca.key \
+	--outfile /etc/pki/ocserv/cacerts/ca.crt >/dev/null 2>&1
+#rm -f /etc/pki/ocserv/ca.tmpl
+fi
+
+#generate server certificate/key
+if test ! -f /etc/pki/ocserv/private/server.key;then
+certtool --generate-privkey --key-type=$KEY_TYPE --outfile /etc/pki/ocserv/private/server.key >/dev/null 2>&1
+echo "cn=`hostname -f`" >/etc/pki/ocserv/server.tmpl
+echo "serial=2" >>/etc/pki/ocserv/server.tmpl
+echo "expiration_days=-1" >>/etc/pki/ocserv/server.tmpl
+echo "signing_key" >>/etc/pki/ocserv/server.tmpl
+echo "encryption_key" >>/etc/pki/ocserv/server.tmpl
+certtool --template /etc/pki/ocserv/server.tmpl \
+	--generate-certificate --load-privkey /etc/pki/ocserv/private/server.key \
+	--load-ca-certificate /etc/pki/ocserv/cacerts/ca.crt --load-ca-privkey \
+	/etc/pki/ocserv/private/ca.key --outfile /etc/pki/ocserv/public/server.crt >/dev/null 2>&1
+#rm -f /etc/pki/ocserv/server.tmpl
+fi
+
+exit 0
--- a/ocserv-pamd.conf
+++ b/ocserv-pamd.conf
@ -0,0 +1,5 @@
+#%PAM-1.0
+auth       include	password-auth
+account    required	pam_nologin.so
+account    include	password-auth
+session    include	password-auth
--- a/10
+++ b/10
@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$REASON" = "connect" ];then
+	# add the user's interface into the internal zone
+	firewall-cmd --zone=internal --add-interface=$DEVICE
+else
+	firewall-cmd --zone=internal --remove-interface=$DEVICE
+fi
+
+exit 0
--- a/ocserv.conf
+++ b/ocserv.conf
@ -0,0 +1,765 @@
+### The following directives do not change with server reload.
+
+# User authentication method. To require multiple methods to be
+# used for the user to login, add multiple auth directives. The values
+# in the 'auth' directive are AND composed (if multiple all must
+# succeed).
+# Available options: certificate, plain, pam, radius, gssapi.
+# Note that authentication methods utilizing passwords cannot be
+# combined (e.g., the plain, pam or radius methods).
+
+# certificate:
+#  This indicates that all connecting users must present a certificate.
+#  The username and user group will be then extracted from it (see
+#  cert-user-oid and cert-group-oid). The certificate to be accepted
+#  it must be signed by the CA certificate as specified in 'ca-cert' and
+#  it must not be listed in the CRL, as specified by the 'crl' option.
+#
+# pam[gid-min=1000]:
+#  This enabled PAM authentication of the user. The gid-min option is used
+# by auto-select-group option, in order to select the minimum valid group ID.
+#
+# plain[passwd=/etc/ocserv/ocpasswd,otp=/etc/ocserv/users.otp]
+#  The plain option requires specifying a password file which contains
+# entries of the following format.
+# "username:groupname1,groupname2:encoded-password"
+# One entry must be listed per line, and 'ocpasswd' should be used
+# to generate password entries. The 'otp' suboption allows one to specify
+# an oath password file to be used for one time passwords; the format of
+# the file is described in https://github.com/archiecobbs/mod-authn-otp/wiki/UsersFile
+#
+# radius[config=/etc/radiusclient/radiusclient.conf,groupconfig=true,nas-identifier=name]:
+#  The radius option requires specifying freeradius-client configuration
+# file. If the groupconfig option is set, then config-per-user/group will be overridden,
+# and all configuration will be read from radius. That also includes the
+# Acct-Interim-Interval, and Session-Timeout values.
+#
+# See doc/README-radius.md for the supported radius configuration attributes.
+#
+# gssapi[keytab=/etc/key.tab,require-local-user-map=true,tgt-freshness-time=900]
+#  The gssapi option allows one to use authentication methods supported by GSSAPI,
+# such as Kerberos tickets with ocserv. It should be best used as an alternative
+# to PAM (i.e., have pam in auth and gssapi in enable-auth), to allow users with
+# tickets and without tickets to login. The default value for require-local-user-map
+# is true. The 'tgt-freshness-time' if set, it would require the TGT tickets presented
+# to have been issued within the provided number of seconds. That option is used to
+# restrict logins even if the KDC provides long time TGT tickets.
+
+auth = "pam"
+#auth = "pam[gid-min=1000]"
+#auth = "plain[passwd=./sample.passwd,otp=./sample.otp]"
+#auth = "certificate"
+#auth = "radius[config=/etc/radiusclient/radiusclient.conf,groupconfig=true]"
+
+# Specify alternative authentication methods that are sufficient
+# for authentication. That is, if set, any of the methods enabled
+# will be sufficient to login, irrespective of the main 'auth' entries.
+# When multiple options are present, they are OR composed (any of them
+# succeeding allows login).
+#enable-auth = "certificate"
+#enable-auth = "gssapi"
+#enable-auth = "gssapi[keytab=/etc/key.tab,require-local-user-map=true,tgt-freshness-time=900]"
+
+# Accounting methods available:
+# radius: can be combined with any authentication method, it provides
+#      radius accounting to available users (see also stats-report-time).
+#
+# pam: can be combined with any authentication method, it provides
+#      a validation of the connecting user's name using PAM. It is
+#      superfluous to use this method when authentication is already
+#      PAM.
+#
+# Only one accounting method can be specified.
+#acct = "radius[config=/etc/radiusclient/radiusclient.conf]"
+
+# Use listen-host to limit to specific IPs or to the IPs of a provided
+# hostname.
+#listen-host = [IP|HOSTNAME]
+
+# Use udp-listen-host to limit udp to specific IPs or to the IPs of a provided
+# hostname. if not set, listen-host will be used
+#udp-listen-host = [IP|HOSTNAME]
+
+# When the server has a dynamic DNS address (that may change),
+# should set that to true to ask the client to resolve again on
+# reconnects.
+#listen-host-is-dyndns = true
+
+# move the listen socket within the specified network namespace
+# listen-netns = "foo"
+
+# TCP and UDP port number
+tcp-port = 443
+udp-port = 443
+
+# The user the worker processes will be run as. This should be a dedicated
+# unprivileged user (e.g., 'ocserv') and no other services should run as this
+# user.
+run-as-user = ocserv
+run-as-group = ocserv
+
+# socket file used for IPC with occtl. You only need to set that,
+# if you use more than a single servers.
+#occtl-socket-file = /var/run/occtl.socket
+
+# socket file used for server IPC (worker-main), will be appended with .PID
+# It must be accessible within the chroot environment (if any), so it is best
+# specified relatively to the chroot directory.
+socket-file = ocserv.sock
+
+# The default server directory. Does not require any devices present.
+chroot-dir = /var/lib/ocserv
+
+# The key and the certificates of the server
+# The key may be a file, or any URL supported by GnuTLS (e.g., 
+# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
+# or pkcs11:object=my-vpn-key;object-type=private)
+#
+# The server-cert file may contain a single certificate, or
+# a sorted certificate chain.
+# There may be multiple server-cert and server-key directives,
+# but each key should correspond to the preceding certificate.
+# The certificate files will be reloaded when changed allowing for in-place
+# certificate renewal (they are checked and reloaded periodically;
+# a SIGHUP signal to main server will force reload).
+
+server-cert = /etc/pki/ocserv/public/server.crt
+server-key = /etc/pki/ocserv/private/server.key
+
+# Diffie-Hellman parameters. Only needed if for old (pre 3.6.0
+# versions of GnuTLS for supporting DHE ciphersuites.
+# Can be generated using:
+# certtool --generate-dh-params --outfile /etc/ocserv/dh.pem
+#dh-params = /etc/ocserv/dh.pem
+
+# In case PKCS #11, TPM or encrypted keys are used the PINs should be available
+# in files. The srk-pin-file is applicable to TPM keys only, and is the 
+# storage root key.
+#pin-file = /etc/ocserv/pin.txt
+#srk-pin-file = /etc/ocserv/srkpin.txt
+
+# The password or PIN needed to unlock the key in server-key file.
+# Only needed if the file is encrypted or a PKCS #11 object. This
+# is an alternative method to pin-file.
+#key-pin = 1234
+
+# The SRK PIN for TPM.
+# This is an alternative method to srk-pin-file.
+#srk-pin = 1234
+
+# The Certificate Authority that will be used to verify
+# client certificates (public keys) if certificate authentication
+# is set.
+#ca-cert = /etc/ocserv/ca.pem
+
+# The number of sub-processes to use for the security module (authentication)
+# processes. Typically this should not be set as the number of processes
+# is determined automatically by the initially set maximum number of clients.
+#sec-mod-scale = 4
+
+
+### All configuration options below this line are reloaded on a SIGHUP.
+### The options above, will remain unchanged. Note however, that the 
+### server-cert, server-key, dh-params and ca-cert options will be reloaded
+### if the provided file changes, on server reload. That allows certificate
+### rotation, but requires the server key to remain the same for seamless
+### operation. If the server key changes on reload, there may be connection
+### failures during the reloading time.
+
+
+# Whether to enable seccomp/Linux namespaces worker isolation. That restricts the number of 
+# system calls allowed to a worker process, in order to reduce damage from a
+# bug in the worker process. It is available on Linux systems at a performance cost.
+# The performance cost is roughly 2% overhead at transfer time (tested on a Linux 3.17.8).
+# Note however, that process isolation is restricted to the specific libc versions
+# the isolation was tested at. If you get random failures on worker processes, try
+# disabling that option and report the failures you, along with system and debugging
+# information at: https://gitlab.com/openconnect/ocserv/issues
+isolate-workers = true
+
+# A banner to be displayed on clients after connection
+#banner = "Welcome"
+
+# A banner to be displayed on clients before connection
+#pre-login-banner = "Welcome"
+
+# Limit the number of clients. Unset or set to zero if unknown. In
+# that case the maximum value is ~8k clients.
+#max-clients = 1024
+max-clients = 16
+
+# Limit the number of identical clients (i.e., users connecting 
+# multiple times). Unset or set to zero for unlimited.
+max-same-clients = 2
+
+# When the server receives connections from a proxy, like haproxy
+# which supports the proxy protocol, set this to obtain the correct
+# client addresses. The proxy protocol would then be expected in
+# the TCP or UNIX socket (not the UDP one). Although both v1
+# and v2 versions of proxy protocol are supported, the v2 version
+# is recommended as it is more efficient in parsing.
+#listen-proxy-proto = true
+
+# Rate limit the number of incoming connections to one every X milliseconds
+# (X is the provided value), as the secmod backlog grows. This
+# makes the server more resilient (and prevents connection failures) on
+# multiple concurrent connections. Set to zero for no limit.
+rate-limit-ms = 100
+
+# Stats report time. The number of seconds after which each
+# worker process will report its usage statistics (number of
+# bytes transferred etc). This is useful when accounting like
+# radius is in use.
+#stats-report-time = 360
+
+# Stats reset time. The period of time statistics kept by main/sec-mod
+# processes will be reset. These are the statistics shown by cmd
+# 'occtl show stats'. For daily: 86400, weekly: 604800
+# This is unrelated to stats-report-time.
+server-stats-reset-time = 604800
+
+# Keepalive in seconds
+keepalive = 32400
+
+# Dead peer detection in seconds.
+# Note that when the client is behind a NAT this value
+# needs to be short enough to prevent the NAT disassociating
+# his UDP session from the port number. Otherwise the client
+# could have his UDP connection stalled, for several minutes.
+dpd = 90
+
+# Dead peer detection for mobile clients. That needs to
+# be higher to prevent such clients being awaken too 
+# often by the DPD messages, and save battery.
+# The mobile clients are distinguished from the header
+# 'X-AnyConnect-Identifier-Platform'.
+mobile-dpd = 1800
+
+# If using DTLS, and no UDP traffic is received for this
+# many seconds, attempt to send future traffic over the TCP
+# connection instead, in an attempt to wake up the client
+# in the case that there is a NAT and the UDP translation
+# was deleted. If this is unset, do not attempt to use this
+# recovery mechanism.
+switch-to-tcp-timeout = 25
+
+# MTU discovery (DPD must be enabled)
+try-mtu-discovery = false
+
+# To enable load-balancer connection draining, set server-drain-ms to a value
+# higher than your load-balancer health probe interval.
+#server-drain-ms = 15000
+
+# If you have a certificate from a CA that provides an OCSP
+# service you may provide a fresh OCSP status response within
+# the TLS handshake. That will prevent the client from connecting
+# independently on the OCSP server.
+# You can update this response periodically using:
+# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
+# Make sure that you replace the following file in an atomic way.
+#ocsp-response = /etc/ocserv/ocsp.der
+
+# The object identifier that will be used to read the user ID in the client 
+# certificate. The object identifier should be part of the certificate's DN
+# Useful OIDs are: 
+#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1, SAN(rfc822name)
+cert-user-oid = 0.9.2342.19200300.100.1.1
+
+# The object identifier that will be used to read the user group in the 
+# client certificate. The object identifier should be part of the certificate's
+# DN. If the user may belong to multiple groups, then use multiple such fields
+# in the certificate's DN. Useful OIDs are: 
+#  OU (organizational unit) = 2.5.4.11 
+#cert-group-oid = 2.5.4.11
+
+# The revocation list of the certificates issued by the 'ca-cert' above.
+# See the manual to generate an empty CRL initially. The CRL will be reloaded
+# periodically when ocserv detects a change in the file. To force a reload use
+# SIGHUP.
+#crl = /etc/ocserv/crl.pem
+
+# Uncomment this to enable compression negotiation (LZS, LZ4).
+#compression = true
+
+# Set the minimum size under which a packet will not be compressed.
+# That is to allow low-latency for VoIP packets. The default size
+# is 256 bytes. Modify it if the clients typically use compression
+# as well of VoIP with codecs that exceed the default value.
+#no-compress-limit = 256
+
+# GnuTLS priority string; note that SSL 3.0 is disabled by default
+# as there are no openconnect (and possibly anyconnect clients) using
+# that protocol. The string below does not enforce perfect forward
+# secrecy, in order to be compatible with legacy clients.
+#
+# Note that the most performant ciphersuites are the moment are the ones
+# involving AES-GCM. These are very fast in x86 and x86-64 hardware, and
+# in addition require no padding, thus taking full advantage of the MTU.
+# For that to be taken advantage of, the openconnect client must be
+# used, and the server must be compiled against GnuTLS 3.2.7 or later.
+# Use "gnutls-cli --benchmark-tls-ciphers", to see the performance
+# difference with AES_128_CBC_SHA1 (the default for anyconnect clients)
+# in your system.
+
+# Note that in Fedora gnutls follows crypto policies so insecure options
+# are disabled within it.
+tls-priorities = "NORMAL:%SERVER_PRECEDENCE"
+
+# That option requires the established DTLS channel to use the same
+# cipher as the primary TLS channel.Note also, that this option implies
+# that the dtls-legacy option is false; this option cannot be enforced
+#match-tls-dtls-ciphers = true
+
+# The time (in seconds) that a client is allowed to stay connected prior
+# to authentication
+auth-timeout = 240
+
+# The time (in seconds) that a client is allowed to stay idle (no traffic)
+# before being disconnected. Unset to disable.
+#idle-timeout = 1200
+
+# The time (in seconds) that a client is allowed to stay connected
+# Unset to disable. When set a client will be disconnected after being
+# continuously connected for this amount of time, and its cookies will
+# be invalidated (i.e., re-authentication will be required).
+#session-timeout = 86400
+
+# The time (in seconds) that a mobile client is allowed to stay idle (no
+# traffic) before being disconnected. Unset to disable.
+#mobile-idle-timeout = 2400
+
+# The time (in seconds) that a client is not allowed to reconnect after 
+# a failed authentication attempt.
+min-reauth-time = 300
+
+# Banning clients in ocserv works with a point system. IP addresses
+# that get a score over that configured number are banned for
+# min-reauth-time seconds. By default a wrong password attempt is 10 points,
+# a KKDCP POST is 1 point, and a connection is 1 point. Note that
+# due to different processes being involved the count of points
+# will not be real-time precise. Local subnet IPs are exempt to allow
+# services that check for process health.
+#
+# Set to zero to disable.
+max-ban-score = 80
+
+# The time (in seconds) that all score kept for a client is reset.
+ban-reset-time = 1200
+
+# In case you'd like to change the default points.
+#ban-points-wrong-password = 10
+#ban-points-connection = 1
+#ban-points-kkdcp = 1
+
+# Cookie timeout (in seconds)
+# Once a client is authenticated he's provided a cookie with
+# which he can reconnect. That cookie will be invalidated if not
+# used within this timeout value. This cookie remains valid, during
+# the user's connected time, and after user disconnection it
+# remains active for this amount of time. That setting should allow a
+# reasonable amount of time for roaming between different networks.
+cookie-timeout = 300
+
+# If this is enabled (not recommended) the cookies will stay
+# valid even after a user manually disconnects, and until they
+# expire. This may improve roaming with some broken clients.
+#persistent-cookies = true
+
+# Whether roaming is allowed, i.e., if true a cookie is
+# restricted to a single IP address and cannot be re-used
+# from a different IP.
+deny-roaming = false
+
+# ReKey time (in seconds)
+# ocserv will ask the client to refresh keys periodically once
+# this amount of seconds is elapsed. Set to zero to disable (note
+# that, some clients fail if rekey is disabled).
+rekey-time = 172800
+
+# ReKey method
+# Valid options: ssl, new-tunnel
+#  ssl: Will perform an efficient rehandshake on the channel allowing
+#       a seamless connection during rekey.
+#  new-tunnel: Will instruct the client to discard and re-establish the channel.
+#       Use this option only if the connecting clients have issues with the ssl
+#       option.
+rekey-method = ssl
+
+# Script to call when a client connects and obtains an IP.
+# The following parameters are passed on the environment.
+# REASON, VHOST, USERNAME, GROUPNAME, DEVICE, IP_REAL (the real IP of the client),
+# REMOTE_HOSTNAME (the remotely advertised hostname), IP_REAL_LOCAL
+# (the local interface IP the client connected), IP_LOCAL
+# (the local IP in the P-t-P connection), IP_REMOTE (the VPN IP of the client),
+# IPV6_LOCAL (the IPv6 local address if there are both IPv4 and IPv6
+# assigned), IPV6_REMOTE (the IPv6 remote address), IPV6_PREFIX, and
+# ID (a unique numeric ID); REASON may be "connect" or "disconnect".
+# In addition the following variables OCSERV_ROUTES (the applied routes for this
+# client), OCSERV_NO_ROUTES, OCSERV_DNS (the DNS servers for this client),
+# will contain a space separated list of routes or DNS servers. A version
+# of these variables with the 4 or 6 suffix will contain only the IPv4 or
+# IPv6 values. The connect script must return zero as exit code, or the
+# client connection will be refused.
+
+# The disconnect script will receive the additional values: STATS_BYTES_IN,
+# STATS_BYTES_OUT, STATS_DURATION that contain a 64-bit counter of the bytes 
+# output from the tun device, and the duration of the session in seconds.
+
+#connect-script = /usr/bin/ocserv-script
+#disconnect-script = /usr/bin/ocserv-script
+
+# This script is to be called when the client's advertised hostname becomes
+# available. It will contain REASON with "host-update" value and the
+# variable REMOTE_HOSTNAME in addition to the connect variables.
+
+#host-update-script = /usr/bin/myhostnamescript
+
+# UTMP
+# Register the connected clients to utmp. This will allow viewing
+# the connected clients using the command 'who'.
+#use-utmp = true
+
+# Whether to enable support for the occtl tool (i.e., either through D-BUS,
+# or via a unix socket).
+use-occtl = true
+
+# PID file. It can be overridden in the command line.
+pid-file = /var/run/ocserv.pid
+
+# Log Level. Ocserv sends the logging messages to standard error
+# as well as the system log. The log level can be overridden in the
+# command line with the -d option. All messages at the configured
+# level and lower will be displayed.
+# Supported levels (default 0):
+#   0 default (Same as basic)
+#   1 basic
+#   2 info
+#   3 debug
+#   4 http
+#   8 sensitive
+#   9 TLS
+log-level = 3
+
+# Set the protocol-defined priority (SO_PRIORITY) for packets to
+# be sent. That is a number from 0 to 6 with 0 being the lowest
+# priority. Alternatively this can be used to set the IP Type-
+# Of-Service, by setting it to a hexadecimal number (e.g., 0x20).
+# This can be set per user/group or globally.
+#net-priority = 3
+
+# Set the VPN worker process into a specific cgroup. This is Linux
+# specific and can be set per user/group or globally.
+#cgroup = "cpuset,cpu:test"
+
+#
+# Network settings
+#
+
+# The name to use for the tun device
+device = vpns
+
+# Whether the generated IPs will be predictable, i.e., IP stays the
+# same for the same user when possible.
+predictable-ips = true
+
+# The default domain to be advertised. Multiple domains (functional on
+# openconnect clients) can be provided in a space separated list.
+default-domain = example.com
+
+# The pool of addresses that leases will be given from. If the leases
+# are given via Radius, or via the explicit-ip? per-user config option then 
+# these network values should contain a network with at least a single
+# address that will remain under the full control of ocserv (that is
+# to be able to assign the local part of the tun device address).
+# Note that, you could use addresses from a subnet of your LAN network if you
+# enable [proxy arp in the LAN interface](http://ocserv.gitlab.io/www/recipes-ocserv-pseudo-bridge.html);
+# in that case it is recommended to set ping-leases to true.
+#ipv4-network = 192.168.1.0
+#ipv4-netmask = 255.255.255.0
+
+# An alternative way of specifying the network:
+#ipv4-network = 192.168.1.0/24
+
+# The IPv6 subnet that leases will be given from.
+#ipv6-network = fda9:4efe:7e3b:03ea::/48 
+
+# Specify the size of the network to provide to clients. It is
+# generally recommended to provide clients with a /64 network in
+# IPv6, but any subnet may be specified. To provide clients only
+# with a single IP use the prefix 128.
+#ipv6-subnet-prefix = 128
+#ipv6-subnet-prefix = 64
+
+# Whether to tunnel all DNS queries via the VPN. This is the default
+# when a default route is set.
+#tunnel-all-dns = true
+
+# The advertized DNS server. Use multiple lines for
+# multiple servers.
+# dns = fc00::4be0
+#dns = 192.168.1.2
+
+# The NBNS server (if any)
+#nbns = 192.168.1.3
+
+# The domains over which the provided DNS should be used. Use
+# multiple lines for multiple domains.
+#split-dns = example.com
+
+# Prior to leasing any IP from the pool ping it to verify that
+# it is not in use by another (unrelated to this server) host.
+# Only set to true, if there can be occupied addresses in the
+# IP range for leases.
+ping-leases = false
+
+# Use this option to set a link MTU value to the incoming
+# connections. Unset to use the default MTU of the TUN device.
+# Note that the MTU is negotiated using the value set and the
+# value sent by the peer.
+#mtu = 1420
+
+# Unset to enable bandwidth restrictions (in bytes/sec). The
+# setting here is global, but can also be set per user or per group.
+#rx-data-per-sec = 40000
+#tx-data-per-sec = 40000
+
+# The number of packets (of MTU size) that are available in
+# the output buffer. The default is low to improve latency.
+# Setting it higher will improve throughput.
+#output-buffer = 10
+
+# Routes to be forwarded to the client. If you need the
+# client to forward routes to the server, you may use the 
+# config-per-user/group or even connect and disconnect scripts.
+#
+# To set the server as the default gateway for the client just
+# comment out all routes from the server, or use the special keyword
+# 'default'.
+
+#route = 10.10.10.0/255.255.255.0
+#route = 192.168.0.0/255.255.0.0
+#route = fef4:db8:1000:1001::/64
+#route = default
+
+# Subsets of the routes above that will not be routed by
+# the server.
+
+no-route = 192.168.5.0/255.255.255.0
+
+# Note the that following two firewalling options currently are available
+# in Linux systems with iptables software. 
+
+# If set, the script /usr/bin/ocserv-fw will be called to restrict
+# the user to its allowed routes and prevent him from accessing
+# any other routes. In case of defaultroute, the no-routes are restricted.
+# All the routes applied by ocserv can be reverted using /usr/bin/ocserv-fw
+# --removeall. This option can be set globally or in the per-user configuration.
+#restrict-user-to-routes = true
+
+# This option implies restrict-user-to-routes set to true. If set, the
+# script /usr/bin/ocserv-fw will be called to restrict the user to
+# access specific ports in the network. This option can be set globally
+# or in the per-user configuration.
+#restrict-user-to-ports = "tcp(443), tcp(80), udp(443), sctp(99), tcp(583), icmp(), icmpv6()"
+
+# You could also use negation, i.e., block the user from accessing these ports only.
+#restrict-user-to-ports = "!(tcp(443), tcp(80))"
+
+# When set to true, all client's iroutes are made visible to all
+# connecting clients except for the ones offering them. This option
+# only makes sense if config-per-user is set.
+#expose-iroutes = true
+
+# Groups that a client is allowed to select from.
+# A client may belong in multiple groups, and in certain use-cases
+# it is needed to switch between them. For these cases the client can
+# select prior to authentication. Add multiple entries for multiple groups.
+# The group may be followed by a user-friendly name in brackets.
+#select-group = group1
+#select-group = group2[My special group]
+
+# The name of the (virtual) group that if selected it would assign the user
+# to its default group.
+#default-select-group = DEFAULT
+
+# Instead of specifying manually all the allowed groups, you may instruct
+# ocserv to scan all available groups and include the full list.
+#auto-select-group = true
+
+# Configuration files that will be applied per user connection or
+# per group. Each file name on these directories must match the username
+# or the groupname.
+# The options allowed in the configuration files are dns, nbns,
+#  ipv?-network, ipv4-netmask, rx/tx-data-per-sec, iroute, route, no-route,
+#  explicit-ipv4, explicit-ipv6, net-priority, deny-roaming, no-udp,
+#  keepalive, dpd, mobile-dpd, max-same-clients, tunnel-all-dns,
+#  restrict-user-to-routes, cgroup, stats-report-time,
+#  mtu, idle-timeout, mobile-idle-timeout, restrict-user-to-ports,
+#  split-dns and session-timeout.
+#
+# Note that the 'iroute' option allows one to add routes on the server
+# based on a user or group. The syntax depends on the input accepted
+# by the commands route-add-cmd and route-del-cmd (see below). The no-udp
+# is a boolean option (e.g., no-udp = true), and will prevent a UDP session
+# for that specific user or group. The hostname option will set a
+# hostname to override any proposed by the user. Note also, that, any 
+# routes, no-routes, DNS or NBNS servers present will overwrite the global ones.
+
+#config-per-user = /etc/ocserv/config-per-user/
+#config-per-group = /etc/ocserv/config-per-group/
+
+# When config-per-xxx is specified and there is no group or user that
+# matches, then utilize the following configuration.
+#default-user-config = /etc/ocserv/defaults/user.conf
+#default-group-config = /etc/ocserv/defaults/group.conf
+
+# The system command to use to setup a route. %{R} will be replaced with the
+# route/mask, %{RI} with the route in CIDR format, and %{D} with the (tun) device.
+#
+# The following example is from linux systems. %{R} should be something
+# like 192.168.2.0/255.255.255.0 and %{RI} 192.168.2.0/24 (the argument of iroute).
+
+#route-add-cmd = "ip route add %{R} dev %{D}"
+#route-del-cmd = "ip route delete %{R} dev %{D}"
+
+# This option allows one to forward a proxy. The special keywords '%{U}'
+# and '%{G}', if present will be replaced by the username and group name.
+#proxy-url = http://example.com/
+#proxy-url = http://example.com/%{U}/
+
+# This option allows you to specify a URL location where a client can
+# post using MS-KKDCP, and the message will be forwarded to the provided
+# KDC server. That is a translation URL between HTTP and Kerberos.
+# In MIT kerberos you'll need to add in realms:
+#   EXAMPLE.COM = {
+#     kdc = https://ocserv.example.com/KdcProxy
+#     http_anchors = FILE:/etc/ocserv-ca.pem
+#   }
+# In some distributions the krb5-k5tls plugin of kinit is required.
+#
+# The following option is available in ocserv, when compiled with GSSAPI support. 
+
+#kkdcp = "SERVER-PATH KERBEROS-REALM PROTOCOL@SERVER:PORT"
+#kkdcp = "/KdcProxy KERBEROS.REALM udp@127.0.0.1:88"
+#kkdcp = "/KdcProxy KERBEROS.REALM tcp@127.0.0.1:88"
+#kkdcp = "/KdcProxy KERBEROS.REALM tcp@[::1]:88"
+
+# Client profile xml. This can be used to advertise alternative servers
+# to the client. A minimal file can be:
+# <?xml version="1.0" encoding="UTF-8"?>
+# <AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/encoding/ AnyConnectProfile.xsd">
+#	<ServerList>
+#		<HostEntry>
+#	            <HostName>VPN Server name</HostName>
+#	            <HostAddress>localhost</HostAddress>
+#		</HostEntry>
+#	</ServerList>
+# </AnyConnectProfile>
+#
+# Other fields may be used by some of the CISCO clients.
+# This file must be accessible from inside the worker's chroot.
+# Note that:
+#  (1) enabling this option is not recommended as it will allow the
+#      worker processes to open arbitrary files (when isolate-workers is
+#      set to true).
+#  (2) This option cannot be set per-user or per-group; only the global
+#      version is being sent to client.
+#user-profile = profile.xml
+
+#
+# The following options are for (experimental) AnyConnect client 
+# compatibility. 
+
+# This option will enable the pre-draft-DTLS version of DTLS, and
+# will not require clients to present their certificate on every TLS
+# connection. It must be set to true to support legacy CISCO clients
+# and openconnect clients < 7.08. When set to true, it implies dtls-legacy = true.
+cisco-client-compat = true
+
+# This option allows one to disable the DTLS-PSK negotiation (enabled by default).
+# The DTLS-PSK negotiation was introduced in ocserv 0.11.5 to deprecate
+# the pre-draft-DTLS negotiation inherited from AnyConnect. It allows the
+# DTLS channel to negotiate its ciphers and the DTLS protocol version.
+#dtls-psk = false
+
+# This option allows one to disable the legacy DTLS negotiation (enabled by default,
+# but that may change in the future).
+# The legacy DTLS uses a pre-draft version of the DTLS protocol and was
+# from AnyConnect protocol. It has several limitations, that are addressed
+# by the dtls-psk protocol supported by openconnect 7.08+.
+dtls-legacy = true
+
+# This option will enable the settings needed for Cisco SVC IPPhone clients
+# to connect. It implies dtls-legacy = true and tls-priorities is changed to
+# only the ciphers the device supports.
+cisco-svc-client-compat = false
+
+# This option will enable the X-CSTP-Client-Bypass-Protocol (disabled by default).
+# If the server has not configured an IPv6 or IPv4 address pool, enabling this option
+# will instruct the client to bypass the server for that IP protocol. The option is
+# currently only understood by Anyconnect clients.
+client-bypass-protocol = false
+
+# The following options are related to server camouflage (hidden service)
+
+# This option allows you to enable the camouflage feature of ocserv that makes it look
+# like a web server to unauthorized parties.
+# With "camouflage" enabled, connection to the VPN can be established only if the client provided a specific
+# "secret string" in the connection URL, e.g. "https://example.com/?mysecretkey",
+# otherwise the server will return HTTP error for all requests.
+camouflage = false
+
+# The URL prefix that should be set on the client (after '?' sign) to pass through the camouflage check,
+# e.g. in case of 'mysecretkey', the server URL on the client should be like "https://example.com/?mysecretkey".
+camouflage_secret = "mysecretkey"
+
+# Defines the realm (browser prompt) for HTTP authentication.
+# If no realm is set, the server will return 404 Not found error instead of 401 Unauthorized.
+# Better change it from the default value to avoid fingerprinting.
+camouflage_realm = "Restricted Content"
+
+#Advanced options
+
+# Option to allow sending arbitrary custom headers to the client after
+# authentication and prior to VPN tunnel establishment. You shouldn't
+# need to use this option normally; if you do and you think that
+# this may help others, please send your settings and reason to
+# the openconnect mailing list. The special keywords '%{U}'
+# and '%{G}', if present will be replaced by the username and group name.
+#custom-header = "X-My-Header: hi there"
+
+
+
+# An example virtual host with different authentication methods serviced
+# by this server.
+
+#[vhost:www.example.com]
+#auth = "certificate"
+
+#ca-cert = /etc/ocserv/ca.pem
+
+# The certificate set here must include a 'dns_name' corresponding to
+# the virtual host name.
+
+#server-cert = /etc/pki/ocserv/public/server.crt
+#server-key = /etc/pki/ocserv/private/server.key
+
+#ipv4-network = 192.168.2.0
+#ipv4-netmask = 255.255.255.0
+
+#cert-user-oid = 0.9.2342.19200300.100.1.1
+
+# HTTP headers
+included-http-headers = Strict-Transport-Security: max-age=31536000 ; includeSubDomains
+included-http-headers = X-Frame-Options: deny
+included-http-headers = X-Content-Type-Options: nosniff
+included-http-headers = Content-Security-Policy: default-src 'none'
+included-http-headers = X-Permitted-Cross-Domain-Policies: none
+included-http-headers = Referrer-Policy: no-referrer
+included-http-headers = Clear-Site-Data: "cache","cookies","storage"
+included-http-headers = Cross-Origin-Embedder-Policy: require-corp
+included-http-headers = Cross-Origin-Opener-Policy: same-origin
+included-http-headers = Cross-Origin-Resource-Policy: same-origin
+included-http-headers = X-XSS-Protection: 0
+included-http-headers = Pragma: no-cache
+included-http-headers = Cache-control: no-store, no-cache
--- a/ocserv.init
+++ b/ocserv.init
@ -0,0 +1,141 @@
+#!/bin/sh
+#
+# ocserv        This shell script takes care of starting and stopping
+#               ocserv on RedHat or other chkconfig-based system.
+#
+# chkconfig: - 24 76
+#
+# processname: ocserv
+#              port.
+
+### BEGIN INIT INFO
+# Provides: ocserv
+# Required-Start: $network
+# Required-Stop: $network
+# Short-Description: start and stop ocserv
+# Description: ocserv is a VPN server
+### END INIT INFO
+
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/ocserv
+#   shell> chkconfig --add ocserv
+#   shell> mkdir /etc/ocserv
+#   make .conf or .sh files in /etc/ocserv (see below)
+
+# To uninstall:
+#   run: chkconfig --del ocserv
+
+ocserv=""
+ocserv_locations="/usr/sbin/ocserv /usr/local/sbin/ocserv"
+for location in $ocserv_locations
+do
+  if [ -f "$location" ]
+  then
+    ocserv=$location
+  fi
+done
+
+# PID directory
+piddir="/var/run/ocserv"
+pidf="$piddir/ocserv.pid"
+
+# Our working directory
+work=/etc/ocserv
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+if [ ${NETWORKING} = "no" ]
+then
+  echo "Networking is down"
+  exit 0
+fi
+
+# Check that binary exists
+if ! [ -f  $ocserv ] 
+then
+  echo "ocserv binary not found"
+  exit 0
+fi
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting ocserv: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -x /usr/sbin/ocserv-genkey ]; then
+	    /usr/sbin/ocserv-genkey
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+		sleep 2
+	fi
+	rm -f $pidf
+
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	$ocserv --pid-file $pidf -c $work/ocserv.conf
+	errors=$?
+	if [ $errors != 0 ]; then
+	    failure; echo
+	else
+	    success; echo
+	fi
+	;;
+  stop)
+	echo -n $"Shutting down ocserv: "
+	if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	fi
+	rm -f $pidf
+
+	success; echo
+	rm -f $lock
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+	;;
+  reload)
+	/usr/bin/occtl reload
+	exit $?
+	;;
+  reopen)
+	;;
+  condrestart)
+	$0 stop
+	sleep 2
+	$0 start
+	;;
+  status)
+	/usr/bin/occtl show status
+        ;;
+  *)
+	echo "Usage: ocserv {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+	;;
+esac
+exit 0
--- a/ocserv.service
+++ b/ocserv.service
@ -0,0 +1,17 @@
+[Unit]
+Description=OpenConnect SSL VPN server
+Documentation=man:ocserv(8)
+After=syslog.target
+After=network-online.target
+After=dbus.service
+
+[Service]
+PrivateTmp=true
+Type=simple
+PIDFile=/var/run/ocserv.pid
+ExecStartPre=/usr/sbin/ocserv-genkey
+ExecStart=/usr/sbin/ocserv --pid-file /var/run/ocserv.pid --config /etc/ocserv/ocserv.conf -f
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target
--- a/ocserv.spec
+++ b/ocserv.spec
@ -0,0 +1,264 @@
+Version:	1.4.0
+Release: %autorelease
+%global _hardened_build 1
+
+%if 0%{?fedora} || 0%{?rhel} >= 7
+%define use_systemd 1
+%define have_gpgv2 1
+%else
+%define use_systemd 0
+%define have_gpgv2 0
+%endif
+
+%if 0%{?fedora} >= 28 || 0%{?rhel} > 7
+%define use_libwrap 0
+%define use_geoip 0
+%else
+%define use_libwrap 1
+%define use_geoip 1
+%endif
+
+%define use_local_protobuf 0
+
+Name:		ocserv
+Summary:	OpenConnect SSL VPN server
+
+# For a breakdown of the licensing, see PACKAGE-LICENSING 
+# To simplify licenses LGPLv2+ files have been promoted to GPLv2+.
+License:	GPL-2.0-or-later AND BSD-3-Clause AND MIT AND CC0-1.0
+URL:		https://ocserv.openconnect-vpn.net/
+Source0:	https://www.infradead.org/ocserv/download/%{name}-%{version}.tar.xz
+Source1:	https://www.infradead.org/ocserv/download/%{name}-%{version}.tar.xz.sig
+Source2:	gpgkey-1F42418905D8206AA754CCDC29EE58B996865171.gpg
+Source3:	ocserv.conf
+Source4:	ocserv.service
+Source5:	ocserv-pamd.conf
+Source6:	PACKAGE-LICENSING
+Source8:	ocserv-genkey
+Source9:	ocserv-script
+Source10:	gpgkey-56EE7FA9E8173B19FE86268D763712747F343FA7.gpg
+Source11:	ocserv.init
+
+# Taken from upstream:
+# http://git.infradead.org/ocserv.git/commitdiff/7d70006a2dbddf783213f1856374bacc74217e09
+
+BuildRequires: make
+BuildRequires: libxcrypt-devel
+BuildRequires:	gcc
+%if 0%{?rhel} && 0%{?rhel} <= 6
+BuildRequires:	gnutls30-devel
+%else
+BuildRequires:	gnutls-devel
+%endif
+BuildRequires:	pam-devel, iproute, ipcalc, openconnect, gnutls-utils
+
+%if (0%{?use_local_protobuf} == 0)
+BuildRequires:	protobuf-c-devel
+%endif
+
+BuildRequires:	libnl3-devel, krb5-devel, libtasn1-devel, gperf, libtalloc-devel
+BuildRequires:	libev-devel, llhttp-devel, radcli-devel, lz4-devel, readline-devel
+BuildRequires:	automake, autoconf
+
+%if %{use_libwrap}
+BuildRequires:	tcp_wrappers-devel
+%endif
+%if %{use_geoip}
+BuildRequires:	GeoIP-devel
+%else
+BuildRequires:	libmaxminddb-devel
+%endif
+
+%if %{use_systemd}
+BuildRequires:	systemd
+BuildRequires:	systemd-devel
+BuildRequires:	liboath-devel
+BuildRequires:	uid_wrapper
+# Disable socket_wrapper on certain architectures because it
+# introduces new syscalls that the worker cannot handle.
+%ifnarch aarch64 %{ix86} %{arm}
+BuildRequires:	socket_wrapper
+%endif
+BuildRequires:	gnupg2
+
+%if 0%{?rhel} && 0%{?rhel} >= 7
+%ifarch x86_64 %{ix86}
+BuildRequires:	libseccomp-devel
+%endif
+%else
+%ifarch x86_64 %{ix86} %{arm} aarch64
+BuildRequires:	libseccomp-devel
+%endif
+%endif
+
+%endif
+
+# no rubygem in epel7
+%if 0%{?fedora}
+BuildRequires:	rubygem-ronn-ng
+%endif
+
+Recommends:		gnutls-utils
+Recommends:		iproute
+Recommends:		pam
+%if %{use_systemd}
+Requires(post):		systemd
+Requires(preun):	systemd
+Requires(postun):	systemd
+%endif
+
+#gnulib is bundled. See https://fedorahosted.org/fpc/ticket/174
+Provides:		bundled(gnulib)
+#CCAN is bundled. See https://fedorahosted.org/fpc/ticket/364
+Provides:		bundled(bobjenkins-hash) bundled(ccan-container_of) 
+Provides:		bundled(ccan-htable) bundled(ccan-list)
+Provides:		bundled(ccan-check_type) bundled(ccan-build_assert)
+
+%description
+OpenConnect server (ocserv) is an SSL VPN server. Its purpose is to be a 
+secure, small, fast and configurable VPN server. It implements the OpenConnect 
+SSL VPN protocol, and has also (currently experimental) compatibility with 
+clients using the AnyConnect SSL VPN protocol. The OpenConnect VPN protocol 
+uses the standard IETF security protocols such as TLS 1.2, and Datagram TLS 
+to provide the secure VPN service. 
+
+%prep
+%if %{have_gpgv2}
+gpgv2 --keyring %{SOURCE2} %{SOURCE1} %{SOURCE0} || gpgv2 --keyring %{SOURCE10} %{SOURCE1} %{SOURCE0}
+%endif
+
+%autosetup -p1
+
+%if (0%{?use_local_protobuf} == 0)
+rm -rf src/protobuf/protobuf-c/
+touch src/*.proto
+%endif
+rm -rf src/ccan/talloc
+sed -i 's|/etc/ocserv.conf|/etc/ocserv/ocserv.conf|g' src/config.c
+sed -i 's/run-as-group = nogroup/run-as-group = nobody/g' tests/data/*.config
+
+%if 0%{?rhel} && 0%{?rhel} <= 6
+echo "int main() { return 77; }" > tests/valid-hostname.c
+%endif
+
+# Create a sysusers.d config file
+cat >ocserv.sysusers.conf <<EOF
+u ocserv - 'ocserv' %{_localstatedir}/lib/ocserv -
+EOF
+
+%build
+
+%if 0%{?rhel} && 0%{?rhel} <= 6
+export PKG_CONFIG_LIBDIR="%{_libdir}/gnutls30/pkgconfig:%{_libdir}/pkgconfig"
+export LIBGNUTLS_CFLAGS="-I/usr/include/gnutls30"
+export LIBGNUTLS_LIBS="-L%{_libdir}/gnutls30/ -lgnutls"
+export CFLAGS="$CFLAGS -I/usr/include/libev -I/usr/include/gnutls30"
+sed -i 's/AM_PROG_AR//g' configure.ac
+autoreconf -fvi
+%endif
+
+%configure \
+        --without-pcl-lib \
+%if %{use_systemd}
+	--enable-systemd \
+%else
+	--disable-systemd \
+%endif
+%if %{use_local_protobuf}
+	--without-protobuf \
+%endif
+%if %{use_libwrap}
+	--with-libwrap
+%else
+	--without-libwrap
+%endif
+
+make %{?_smp_mflags}
+
+%pre
+mkdir -p %{_sysconfdir}/pki/ocserv/public
+mkdir -p -m 700 %{_sysconfdir}/pki/ocserv/private
+mkdir -p %{_sysconfdir}/pki/ocserv/cacerts
+
+%check
+make check %{?_smp_mflags} VERBOSE=1
+
+%if %{use_systemd}
+%post
+%systemd_post ocserv.service
+
+%preun
+%systemd_preun ocserv.service
+
+%postun
+%systemd_postun_with_restart ocserv.service
+%endif
+
+%install
+rm -rf %{buildroot}
+cp -a %{SOURCE6} PACKAGE-LICENSING
+mkdir -p %{buildroot}/%{_sysconfdir}/pam.d/
+mkdir -p %{buildroot}/%{_sysconfdir}/ocserv/
+install -p -m 644 %{SOURCE5} %{buildroot}/%{_sysconfdir}/pam.d/ocserv
+install -p -m 644 %{SOURCE3} %{buildroot}/%{_sysconfdir}/ocserv/
+mkdir -p %{buildroot}%{_localstatedir}/lib/ocserv/
+install -p -m 644 doc/profile.xml %{buildroot}%{_localstatedir}/lib/ocserv/
+mkdir -p %{buildroot}/%{_sbindir}
+install -p -m 755 %{SOURCE8} %{buildroot}/%{_sbindir}
+mkdir -p %{buildroot}/%{_bindir}
+install -p -m 755 %{SOURCE9} %{buildroot}/%{_bindir}
+
+%if 0%{?rhel} && 0%{?rhel} <= 7
+sed -i 's|expiration_days=-1|expiration_days=9999|' %{buildroot}/%{_sbindir}/ocserv-genkey
+sed -i 's|tls-priorities = "@SYSTEM"|tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0"|' %{buildroot}/%{_sysconfdir}/ocserv/ocserv.conf
+%if 0%{?rhel} <= 6
+sed -i 's|isolate-workers = true|isolate-workers = false|' %{buildroot}/%{_sysconfdir}/ocserv/ocserv.conf
+%endif
+%endif
+
+%if %{use_systemd}
+mkdir -p %{buildroot}/%{_unitdir}
+install -p -m 644 %{SOURCE4} %{buildroot}/%{_unitdir}
+%else
+mkdir -p %{buildroot}/%{_initrddir}
+install -D -m 0755 %{SOURCE11} %{buildroot}/%{_initrddir}/%{name}
+%endif
+
+%make_install
+
+install -m0644 -D ocserv.sysusers.conf %{buildroot}%{_sysusersdir}/ocserv.conf
+
+%files
+%defattr(-,root,root,-)
+
+%dir %{_localstatedir}/lib/ocserv
+%dir %{_sysconfdir}/ocserv
+
+%config(noreplace) %{_sysconfdir}/ocserv/ocserv.conf
+%config(noreplace) %{_sysconfdir}/pam.d/ocserv
+%config(noreplace) %{_localstatedir}/lib/ocserv/profile.xml
+
+%doc AUTHORS ChangeLog NEWS COPYING README.md PACKAGE-LICENSING doc/README-radius.md
+%doc src/ccan/licenses/CC0 src/ccan/licenses/LGPL-2.1 src/ccan/licenses/BSD-MIT
+
+%{_mandir}/man8/ocserv.8*
+%{_mandir}/man8/occtl.8*
+%{_mandir}/man8/ocpasswd.8*
+
+%{_bindir}/ocpasswd
+%{_bindir}/occtl
+%{_libexecdir}/ocserv-fw
+%{_bindir}/ocserv-script
+%{_sbindir}/ocserv
+%{_sbindir}/ocserv-worker
+%{_sbindir}/ocserv-genkey
+%{_localstatedir}/lib/ocserv/profile.xml
+%if %{use_systemd}
+%{_unitdir}/ocserv.service
+%else
+%{_initrddir}/%{name}
+%endif
+%{_sysusersdir}/ocserv.conf
+
+%changelog
+%autochangelog
--- a/2
+++ b/2
@ -0,0 +1,2 @@
+SHA512 (ocserv-1.4.0.tar.xz) = cef771c6ee43925d743b7a21fed1cd7d54c10e39c0966fbc7062df9b7691c9a3a73c1c4589382592668f81809edea0fe0b947c7ddf86a6cdc1a144cf059526b0
+SHA512 (ocserv-1.4.0.tar.xz.sig) = a73ce14e8e355f747e40241056c2bb734d6dae4e1d6aed0f24aaa6d1a469f6d86a077af4a38e6376846fd5520ee33c7be8ce7b3830bcb0faa5e32b12ed7483cd