diff --git a/pgpool-II-1.1.1.tar.gz b/pgpool-II-1.1.1.tar.gz
new file mode 100644
index 0000000..80d8d3b
Binary files /dev/null and b/pgpool-II-1.1.1.tar.gz differ
diff --git a/pgpool.conf.sample b/pgpool.conf.sample
new file mode 100644
index 0000000..a460d5d
--- /dev/null
+++ b/pgpool.conf.sample
@@ -0,0 +1,148 @@
+#
+# pgpool-II configuration file sample
+
+# Host name or IP address to listen on: '*' for all, '' for no TCP/IP
+# connections
+listen_addresses = 'localhost'
+
+# Port number for pgpool
+port = 9999
+
+# Port number for pgpool communication manager
+pcp_port = 9898
+
+# Unix domain socket path.  
+socket_dir = '/var/run'
+
+# Unix domain socket path for pgpool communication manager.
+pcp_socket_dir = '/var/run'
+
+# Unix domain socket path for the backend. 
+backend_socket_dir = '/var/run'
+
+# pgpool communication manager timeout. 0 means no timeout, but strongly not recommended!
+pcp_timeout = 10
+
+# number of pre-forked child process
+num_init_children = 32
+
+# Number of connection pools allowed for a child process
+max_pool = 4
+
+# If idle for this many seconds, child exits.  0 means no timeout.
+child_life_time = 300
+
+# If idle for this many seconds, connection to PostgreSQL closes.
+# 0 means no timeout.
+connection_life_time = 0
+
+# If child_max_connections connections were received, child exits.
+# 0 means no exit.
+child_max_connections = 0
+
+# Logging directory
+logdir = '/var/run'
+
+# Replication mode
+replication_mode = false
+
+# Set this to true if you want to avoid deadlock situations when
+# replication is enabled.  There will, however, be a noticable performance
+# degradation.  A workaround is to set this to false and insert a /*STRICT*/
+# comment at the beginning of the SQL command.
+replication_strict = true
+
+# When replication_strict is set to false, there will be a chance for
+# deadlocks.  Set this to nonzero (in milliseconds) to detect this
+# situation and resolve the deadlock by aborting current session.
+replication_timeout = 5000
+
+# Load balancing mode, i.e., all SELECTs except in a transaction block
+# are load balanced.  This is ignored if replication_mode is false.
+load_balance_mode = false
+
+# if there's a data mismatch between master and secondary
+# start degeneration to stop replication mode
+replication_stop_on_mismatch = false
+
+# If true, replicate SELECT statement when load balancing is disabled.
+# If false, it is only sended to the master node.
+replicate_select = false
+
+# Semicolon separated list of queries to be issued at the end of a session
+reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
+
+# If true print timestamp on each log line.
+print_timestamp = true
+
+# If true, operate in master/slave mode.
+master_slave_mode = false
+
+# If true, cache connection pool.
+connection_cache = true
+
+# Health check timeout.  0 means no timeout.
+health_check_timeout = 20
+
+# Health check period.  0 means no health check.
+health_check_period = 0
+
+# Health check user
+health_check_user = 'nobody'
+
+# If true, automatically lock table with INSERT statements to keep SERIAL
+# data consistency.  An /*INSERT LOCK*/ comment has the same effect.  A
+# /NO INSERT LOCK*/ comment disables the effect.
+insert_lock = false
+
+# If true, ignore leading white spaces of each query while pgpool judges
+# whether the query is a SELECT so that it can be load balanced.  This
+# is useful for certain APIs such as DBI/DBD which is known to adding an
+# extra leading white space.
+ignore_leading_white_space = false
+
+# If true, print all statements to the log.  Like the log_statement option
+# to PostgreSQL, this allows for observing queries without engaging in full
+# debugging.
+log_statement = false
+
+# If true, incoming connections will be printed to the log.
+log_connections = false
+
+# If true, hostname will be shown in ps status. Also shown in
+# connection log if log_connections = true.
+# Be warned that this feature will add overhead to look up hostname.
+log_hostname = false
+
+# if non 0, run in parallel query mode
+parallel_mode = false
+
+# if non 0, use query cache
+enable_query_cache = false
+
+#set pgpool2 hostname 
+pgpool2_hostname = ''
+
+# system DB info
+system_db_hostname = 'localhost'
+system_db_port = 5432
+system_db_dbname = 'pgpool'
+system_db_schema = 'pgpool_catalog'
+system_db_user = 'pgpool'
+system_db_password = ''
+
+# backend_hostname, backend_port, backend_weight
+# here are examples
+#backend_hostname0 = 'host1'
+#backend_port0 = 5432
+#backend_weight0 = 1
+#backend_hostname1 = 'host2'
+#backend_port1 = 5433
+#backend_weight1 = 1
+
+# - HBA -
+
+# If true, use pool_hba.conf for client authentication. In pgpool-II
+# 1.1, the default value is false. The default value will be true in
+# 1.2.
+enable_pool_hba = false
diff --git a/pgpool.conf.sample.patch b/pgpool.conf.sample.patch
new file mode 100644
index 0000000..a5a9baa
--- /dev/null
+++ b/pgpool.conf.sample.patch
@@ -0,0 +1,40 @@
+--- pgpool.conf.sample.old	2007-08-05 05:27:53.000000000 +0300
++++ pgpool.conf.sample	2007-08-05 05:29:01.000000000 +0300
+@@ -1,6 +1,5 @@
+ #
+ # pgpool-II configuration file sample
+-# $Header: /home/fedora/jkeating/pkgs/rpms/postgresql-pgpool-II/EL-5/pgpool.conf.sample.patch,v 1.1 2007/08/16 09:22:43 devrim Exp $
+ 
+ # Host name or IP address to listen on: '*' for all, '' for no TCP/IP
+ # connections
+@@ -12,16 +11,14 @@
+ # Port number for pgpool communication manager
+ pcp_port = 9898
+ 
+-# Unix domain socket path.  (The Debian package defaults to
+-# /var/run/postgresql.)
+-socket_dir = '/tmp'
++# Unix domain socket path.  
++socket_dir = '/var/run'
+ 
+ # Unix domain socket path for pgpool communication manager.
+-# (Debian package defaults to /var/run/postgresql)
+-pcp_socket_dir = '/tmp'
++pcp_socket_dir = '/var/run'
+ 
+-# Unix domain socket path for the backend. Debian package defaults to /var/run/postgresql!
+-backend_socket_dir = '/tmp'
++# Unix domain socket path for the backend. 
++backend_socket_dir = '/var/run'
+ 
+ # pgpool communication manager timeout. 0 means no timeout, but strongly not recommended!
+ pcp_timeout = 10
+@@ -44,7 +41,7 @@
+ child_max_connections = 0
+ 
+ # Logging directory
+-logdir = '/tmp'
++logdir = '/var/run'
+ 
+ # Replication mode
+ replication_mode = false
diff --git a/pgpool.init b/pgpool.init
new file mode 100755
index 0000000..8c96220
--- /dev/null
+++ b/pgpool.init
@@ -0,0 +1,163 @@
+#!/bin/sh
+# pgpool    This is the init script for starting up pgpool-II
+#
+# chkconfig: - 64 36
+# description: Starts and stops the pgpool daemon
+# processname: pgpool
+# pidfile:	/var/run/pgpool.pid
+#
+# v1.0.0 Devrim GUNDUZ <devrim@CommandPrompt.com>
+# - Initial version of Red Hat / Fedora init script
+
+if [ -r /etc/sysconfig/pgpool ]; then
+    . /etc/sysconfig/pgpool
+fi
+
+# Source function library.
+INITD=/etc/rc.d/init.d
+. $INITD/functions
+
+# Get function listing for cross-distribution logic.
+TYPESET=`typeset -f|grep "declare"`
+
+# Get config.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+# We need it for pgpool
+[ "${NETWORKING}" = "no" ] && exit 0
+
+# Find the name of the script
+NAME=pgpool
+
+# Set defaults for configuration variables
+PGPOOLENGINE=/usr/bin
+PGPOOLDAEMON=$PGPOOLENGINE/pgpool
+PGPOOLCONF=/etc/pgpool.conf
+PGPOOLPID=/var/run/pgpool.pid
+PGPOOLLOG=/var/log/pgpool.log
+
+test -x $PGPOOLDAEMON || exit 5
+
+# Create the log file if it does not exist
+if [ ! -r $PGPOOLLOG ]
+then
+	touch $PGPOOLLOG
+fi
+
+# Check whether the config file exists or not
+if [ ! -r /etc/pgpool.conf ]
+then
+	echo "$PGPOOLCONF not found"
+	RETVAL=1
+	failure	
+	exit
+fi
+
+script_result=0
+
+start(){
+	PGPOOL_START=$"Starting ${NAME} service: "
+
+	echo -n "$PGPOOL_START"
+	$PGPOOLDAEMON -f $PGPOOLCONF $OPTS & >> "$PGPOOLLOG" 2>&1 < /dev/null
+	sleep 2
+
+	pid=`pidof -s "$PGPOOLDAEMON"`
+	if [ $pid ] 
+	then
+		success "$PGPOOL_START"
+		touch /var/lock/subsys/${NAME}
+		echo
+	else
+		failure "$PSQL_START"
+		echo
+		script_result=1
+	fi
+}
+
+stop(){
+	echo -n $"Stopping ${NAME} service: "
+        if [ $UID -ne 0 ]; then
+                RETVAL=1
+                failure
+        else
+                killproc /usr/bin/pgpool
+                RETVAL=$?
+                [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/${NAME}
+        fi;
+        echo
+        return $RETVAL
+}
+
+switch() {
+	echo -n $"Sending switchover request to $NAME "
+	$PGPOOLDAEMON switch >> "$PGPOOLLOG" 2>&1 < /dev/null
+	RETVAL=$?
+	echo
+	if [ $RETVAL -eq 0 ] 
+	then
+		echo_success
+	else
+		echo_failure
+	fi
+	echo
+}
+
+restart(){
+    stop
+    start
+}
+
+reload(){
+echo -n $"Reloading ${NAME}: "
+   if [ -n "`pidfileofproc $PGPOOLDAEMON`" ] ; then
+      killproc $PGPOOLDAEMON -HUP
+   else
+      failure $"Reloading ${NAME}"
+   fi
+   RETVAL=$?
+   echo
+}
+
+condrestart(){
+    [ -e /var/lock/subsys/${NAME} ] && restart
+}
+
+condstop(){
+    [ -e /var/lock/subsys/${NAME} ] && stop
+}
+
+# See how we were called.
+case "$1" in
+  start)
+        start
+        ;;
+  stop)
+        stop
+        ;;
+  switch)
+        switch
+        ;;
+  status)
+        status pgpool
+        script_result=$?
+        ;;
+  restart)
+        restart
+        ;;
+  reload|force-reload)
+        reload
+        ;;
+  condrestart)
+        condrestart
+        ;;
+  condstop)
+        condstop
+        ;;
+  *)
+        echo $"Usage: $0 {start|stop|switch|status|restart|condrestart|condstop|reload|force-reload}"
+        exit 1
+esac
+
+exit $script_result
diff --git a/pgpool.sysconfig b/pgpool.sysconfig
new file mode 100644
index 0000000..ef8e2e1
--- /dev/null
+++ b/pgpool.sysconfig
@@ -0,0 +1,6 @@
+# Options for pgpool
+
+# -n: don't run in daemon mode. does not detatch control tty
+# -d: debug mode. lots of debug information will be printed
+
+#OPTS=" -d -n"