diff --git a/.gitignore b/.gitignore deleted file mode 100644 index 96709de..0000000 --- a/.gitignore +++ /dev/null @@ -1,4 +0,0 @@ -postgrey-1.32.tar.gz -/postgrey-1.34.tar.gz -/postgrey-1.36.tar.gz -/postgrey-1.37.tar.gz diff --git a/README-rpm b/README-rpm deleted file mode 100644 index 7e3f3cb..0000000 --- a/README-rpm +++ /dev/null @@ -1,34 +0,0 @@ -1. To make use of postgrey in postfix, edit postfix configuration file: - -/etc/postfix/main.cf: - - smtpd_recipient_restrictions = ... - check_policy_service unix:postgrey/socket, ... - -Or if TCP sockets (modify IP / port if needed) is preferred, first change -POSTGREY_TYPE: - -/etc/sysconfig/postgrey: - - POSTGREY_TYPE="--inet=127.0.0.1:10023" - -then modify postfix configuration file: - -/etc/postfix/main.cf: - - smtpd_recipient_restrictions = ... - check_policy_service inet:127.0.0.1:10023, ... - -After above steps, please restart the postfix service to make sure postfix has -loaded the changes. And don't forget to activate the service on startup! - -2. If --privacy option is passed to postgrey in /etc/sysconfig/postgrey, make -sure perl(Digest::SHA) is installed, using dnf to install if not available: - - dnf install perl\(Digest::SHA\) - -Don't forget to escape the parentheses if other perl modules are absent. - -3. Postgrey could be used with exim if you want, but need to modify the -systemd service file like removing the dependency of postfix.service. More -details in README.exim underneath /usr/share/doc/postgrey. diff --git a/dead.package b/dead.package new file mode 100644 index 0000000..a72aec0 --- /dev/null +++ b/dead.package @@ -0,0 +1 @@ +epel8-playground decommissioned : https://pagure.io/epel/issue/136 diff --git a/postgrey.init b/postgrey.init deleted file mode 100755 index 17f9f19..0000000 --- a/postgrey.init +++ /dev/null @@ -1,113 +0,0 @@ -#!/bin/sh -# -# postgrey Postfix Greylisting Policy Server -# -# chkconfig: - 79 31 -# description: Postfix Greylisting Policy Server - -### BEGIN INIT INFO -# Provides: postgrey -# Required-Start: $local_fs $network -# Required-Stop: $local_fs $network -# Should-Start: -# Should-Stop: -# Default-Start: -# Default-Stop: 0 1 2 3 4 5 6 -# Short-Description: Postfix Greylisting Policy Server -# Description: Postgrey is a Postfix policy server implementing -# greylisting. When a request for delivery of a mail is -# received by Postfix via SMTP, the triplet CLIENT_IP / -# SENDER / RECIPIENT is built. If it is the first time -# that this triplet is seen, or if the triplet was first -# seen less than 5 minutes, then the mail gets rejected -# with a temporary error. -### END INIT INFO - -# Source function library. -. /etc/rc.d/init.d/functions - -exec="/usr/sbin/postgrey" -prog="postgrey" -options="--unix=/var/spool/postfix/postgrey/socket" - -[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog - -lockfile=/var/lock/subsys/$prog - -start() { - [ -x $exec ] || exit 5 - echo -n $"Starting $prog: " - daemon $exec -d $options - retval=$? - echo - [ $retval -eq 0 ] && touch $lockfile - return $retval -} - -stop() { - echo -n $"Stopping $prog: " - killproc $prog - retval=$? - echo - [ $retval -eq 0 ] && rm -f $lockfile - return $retval -} - -restart() { - stop - start -} - -reload() { - echo -n $"Reloading $prog: " - killproc $prog -HUP - retval=$? - echo - return $retval -} - -force_reload() { - restart -} - -rh_status() { - status $prog -} - -rh_status_q() { - rh_status &>/dev/null -} - - -case "$1" in - start) - rh_status_q && exit 0 - $1 - ;; - stop) - rh_status_q || exit 0 - $1 - ;; - restart) - $1 - ;; - reload) - rh_status_q || exit 7 - $1 - ;; - force-reload) - force_reload - ;; - status) - rh_status - ;; - condrestart|try-restart) - rh_status_q || exit 0 - restart - ;; - *) - echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}" - exit 2 -esac -exit $? - diff --git a/postgrey.service b/postgrey.service deleted file mode 100644 index 9da9c13..0000000 --- a/postgrey.service +++ /dev/null @@ -1,26 +0,0 @@ -[Unit] -Description=Postfix Greylisting Service -Documentation=man:postgrey(8) -Before=postfix.service - -[Service] -Type=forking -EnvironmentFile=-/etc/sysconfig/postgrey -ExecStartPre=-/bin/rm -f /var/run/postgrey.pid -PIDFile=/var/run/postgrey.pid -ExecStart=/usr/sbin/postgrey \ - $POSTGREY_TYPE \ - $POSTGREY_PID \ - $POSTGREY_GROUP \ - $POSTGREY_USER \ - '--greylist-text=Greylisted for %%s seconds' \ - --daemonize \ - $POSTGREY_DELAY \ - $POSTGREY_OPTS - -Restart=always -RestartSec=1 -TimeoutSec=5 - -[Install] -WantedBy=multi-user.target diff --git a/postgrey.spec b/postgrey.spec deleted file mode 100644 index d1a1e2d..0000000 --- a/postgrey.spec +++ /dev/null @@ -1,356 +0,0 @@ -%global confdir %{_sysconfdir}/postfix - -Name: postgrey -Version: 1.37 -Release: 27%{?dist} -Summary: Postfix Greylisting Policy Server -# File headers only state "GNU GPL", but the LICENSE sections state v2 and "any -# later version" -# Automatically converted from old format: GPLv2+ - review is highly recommended. -License: GPL-2.0-or-later -URL: http://postgrey.schweikert.ch/ -Source0: http://postgrey.schweikert.ch/pub/postgrey-%{version}.tar.gz -Source1: postgrey.service -Source2: README-rpm -Source3: postgrey.sysconfig -BuildArch: noarch -BuildRequires: perl-generators -BuildRequires: perl-podlators -BuildRequires: systemd -## Note: If --privacy specified, perl(Digest::SHA) will be needed. -#Requires: perl(BerkeleyDB) -#Requires: perl(Fcntl) -#Requires: perl(Getopt::Long) -#Requires: perl(IO::Multiplex) -#Requires: perl(Net::DNS) -#Requires: perl(Net::Server) -#Requires: perl(Pod::Usage) -#Requires: perl(POSIX) -#Requires: perl(strict) -#Requires: perl(Sys::Hostname) -#Requires: perl(Sys::Syslog) -# Requiring postfix for its directories and GID. -Recommends: postfix -Requires(post): systemd -Requires(preun): systemd -Requires(postun): systemd - -%description -Postgrey is a Postfix policy server implementing greylisting. When a request -for delivery of a mail is received by Postfix via SMTP, the triplet CLIENT_IP / -SENDER / RECIPIENT is built. If it is the first time that this triplet is -seen, or if the triplet was first seen less than 5 minutes, then the mail gets -rejected with a temporary error. Hopefully spammers or viruses will not try -again later, as it is however required per RFC. - -%prep -%setup -q -# Set default group tp postgrey. -sed -i 's|nogroup|postgrey|g' postgrey -# No perldoc, man is enough. -sed -i 's|POD ||g;s|perldoc|man|g' README -install -pm0644 %{SOURCE2} README.Fedora - -# Create a sysusers.d config file -cat >postgrey.sysusers.conf < postgrey.8 - -%install -# Configuration files. -mkdir -p %{buildroot}%{confdir} -install -pm0644 postgrey_whitelist_{clients,recipients} \ - %{buildroot}%{confdir}/ -# Local whitelist file. -echo "# Clients that should not be greylisted. See postgrey(8)." \ - > %{buildroot}%{confdir}/postgrey_whitelist_clients.local - -# Main script. -install -pDm0755 postgrey %{buildroot}%{_sbindir}/postgrey - -# Spool directory. -mkdir -p %{buildroot}%{_localstatedir}/spool/postfix/postgrey - -# Systemd service. -install -pDm0644 %{SOURCE1} \ - %{buildroot}%{_unitdir}/postgrey.service - -# Sysconfig file. -install -pDm0644 %{SOURCE3} \ - %{buildroot}%{_sysconfdir}/sysconfig/postgrey - -# Manpage. -install -pDm0644 postgrey.8 \ - %{buildroot}%{_mandir}/man8/postgrey.8 - -# Optional report script. -install -pDm0755 contrib/postgreyreport \ - %{buildroot}%{_sbindir}/postgreyreport - -install -m0644 -D postgrey.sysusers.conf %{buildroot}%{_sysusersdir}/postgrey.conf - - -%post -%systemd_post postgrey.service - -%preun -%systemd_preun postgrey.service - -%postun -%systemd_postun postgrey.service - -%triggerun -- postgrey < 1.34-3 -# Save the current service runlevel info -# User must manually run systemd-sysv-convert --apply postgrey -# to migrate them to systemd targets -/usr/bin/systemd-sysv-convert --save postgrey >/dev/null 2>&1 ||: - -# Run these because the SysV package being removed won't do them -/sbin/chkconfig --del postgrey >/dev/null 2>&1 || : -/bin/systemctl try-restart postgrey.service >/dev/null 2>&1 || : - -%files -%doc Changes README README.exim README.Fedora -%license COPYING -%{_unitdir}/postgrey.service -%{_sysconfdir}/sysconfig/postgrey -%config(noreplace) %{confdir}/postgrey_whitelist_clients -%config(noreplace) %{confdir}/postgrey_whitelist_recipients -%config(noreplace) %{confdir}/postgrey_whitelist_clients.local -%{_sbindir}/postgrey -%{_sbindir}/postgreyreport -%{_mandir}/man8/postgrey.8* -%dir %attr(0751,postgrey,postfix) %{_localstatedir}/spool/postfix/postgrey/ -%{_sysusersdir}/postgrey.conf - -%changelog -* Fri Jul 25 2025 Fedora Release Engineering - 1.37-27 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild - -* Tue Feb 11 2025 Zbigniew Jędrzejewski-Szmek - 1.37-26 -- Add sysusers.d config file to allow rpm to create users/groups automatically - -* Sat Jan 18 2025 Fedora Release Engineering - 1.37-25 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild - -* Fri Jul 26 2024 Miroslav Suchý - 1.37-24 -- convert license to SPDX - -* Fri Jul 19 2024 Fedora Release Engineering - 1.37-23 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild - -* Fri Jan 26 2024 Fedora Release Engineering - 1.37-22 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild - -* Sun Jan 21 2024 Fedora Release Engineering - 1.37-21 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild - -* Fri Jul 21 2023 Fedora Release Engineering - 1.37-20 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild - -* Fri Jan 20 2023 Fedora Release Engineering - 1.37-19 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild - -* Fri Jul 22 2022 Fedora Release Engineering - 1.37-18 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild - -* Mon May 30 2022 Jitka Plesnikova - 1.37-17 -- Perl 5.36 rebuild - -* Fri Jan 21 2022 Fedora Release Engineering - 1.37-16 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild - -* Fri Jul 23 2021 Fedora Release Engineering - 1.37-15 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild - -* Fri May 21 2021 Jitka Plesnikova - 1.37-14 -- Perl 5.34 rebuild - -* Wed Jan 27 2021 Fedora Release Engineering - 1.37-13 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild - -* Tue Jul 28 2020 Fedora Release Engineering - 1.37-12 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild - -* Mon Jun 22 2020 Jitka Plesnikova - 1.37-11 -- Perl 5.32 rebuild - -* Thu Jan 30 2020 Fedora Release Engineering - 1.37-10 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild - -* Fri Jul 26 2019 Fedora Release Engineering - 1.37-9 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild - -* Thu May 30 2019 Jitka Plesnikova - 1.37-8 -- Perl 5.30 rebuild - -* Sat Feb 02 2019 Fedora Release Engineering - 1.37-7 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild - -* Fri Jul 13 2018 Fedora Release Engineering - 1.37-6 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild - -* Thu Jun 28 2018 Jitka Plesnikova - 1.37-5 -- Perl 5.28 rebuild - -* Fri Feb 09 2018 Fedora Release Engineering - 1.37-4 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild - -* Thu Jul 27 2017 Fedora Release Engineering - 1.37-3 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild - -* Sun Jun 04 2017 Jitka Plesnikova - 1.37-2 -- Perl 5.26 rebuild - -* Sat Mar 11 2017 Nils Philippsen - 1.37-1 -- version 1.37 -- fix syntax error in sysconfig file (#1292066) - -* Sat Feb 11 2017 Fedora Release Engineering - 1.36-5 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild - -* Sun May 15 2016 Jitka Plesnikova - 1.36-4 -- Perl 5.24 rebuild - -* Thu Feb 04 2016 Fedora Release Engineering - 1.36-3 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild - -* Thu Nov 26 2015 Petr Pisar - 1.36-2 -- Rebuild against fixed "file" tool that broke Perl dependencies (bug #1279401) - -* Fri Sep 04 2015 Christopher Meng - 1.36-1 -- Update to 1.36 (1.35 skipped) -- Refine release section of postgrey manpage. -- Refine configuration instructions. - -* Thu Jun 18 2015 Fedora Release Engineering - 1.34-17 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild - -* Wed Jun 03 2015 Jitka Plesnikova - 1.34-16 -- Perl 5.22 rebuild - -* Fri Nov 07 2014 Petr Pisar - 1.34-15 -- Build-require perl-podlators for pod2man (bug #1161477) - -* Wed Aug 27 2014 Jitka Plesnikova - 1.34-14 -- Perl 5.20 rebuild - -* Sat Jun 07 2014 Fedora Release Engineering - 1.34-13 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild - -* Thu Feb 06 2014 Christopher Meng - 1.34-12 -- Correct the syntax of systemd unit to support option with space-separated content. - -* Tue Jan 21 2014 Christopher Meng - 1.34-11 -- Let perl magic determine the dependencies. -- Fix systemd unit typo. - -* Tue Jan 14 2014 Christopher Meng - 1.34-10 -- Fix typo in the SPEC. - -* Sun Jan 12 2014 Christopher Meng - 1.34-9 -- Update systemd service unit to be more powerful. -- SPEC cleanup(BZ#850279). -- Add missing dependencies(BZ#1039355). - -* Wed Jan 01 2014 Nils Philippsen - 1.34-8 -- make postgrey work with perl 5.18 (#1039551) - -* Sun Aug 04 2013 Fedora Release Engineering - 1.34-7 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild - -* Wed Jul 17 2013 Petr Pisar - 1.34-6 -- Perl 5.18 rebuild -- Build-require systemd-units - -* Thu Feb 14 2013 Fedora Release Engineering - 1.34-5 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild - -* Sat Jul 21 2012 Fedora Release Engineering - 1.34-4 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild - -* Tue Mar 20 2012 Jon Ciesla - 1.34-3 -- Migrate to systemd, BZ 714430. - -* Sat Jan 14 2012 Fedora Release Engineering - 1.34-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild - -* Tue Jun 7 2011 Matthias Saou 1.34-1 -- Update to 1.34. - -* Wed Feb 09 2011 Fedora Release Engineering - 1.32-3 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild - -* Sun Jul 26 2009 Fedora Release Engineering - 1.32-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild - -* Sun Apr 12 2009 Matthias Saou 1.32-1 -- Update to 1.32. -- Update init script to the new style. -- Slightly update README-rpm instructions. - -* Thu Feb 26 2009 Fedora Release Engineering -- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild - -* Thu May 22 2008 Matthias Saou 1.31-1 -- Update to 1.31. - -* Mon Aug 6 2007 Matthias Saou 1.30-1 -- Update to 1.30. -- Update License field. - -* Fri Jun 22 2007 Matthias Saou 1.28-1 -- Update to 1.28. -- Update URL to the new homepage. - -* Mon Feb 12 2007 Matthias Saou 1.27-4 -- Silence %%setup. -- Fix init script mode in the srpm. -- Remove explicit perl(IO::Multiplex) requirement, not needed on FC6 (but - probably still on RHEL4). -- Add a comment line to the empty local whitelist file. - -* Mon Dec 4 2006 Matthias Saou 1.27-3 -- Add man page generation (Mike Wohlgemuth). - -* Fri Dec 1 2006 Matthias Saou 1.27-2 -- Include postgreyreport script. - -* Mon Nov 6 2006 Matthias Saou 1.27-1 -- Spec file cleanup. - -* Wed Jan 18 2006 Levente Farkas 1.24 -- some minor changes thanks to Peter Bieringer - -* Mon Jan 16 2006 Levente Farkas 1.24 -- upgrade to 1.24 - -* Sun Nov 13 2005 Levente Farkas 1.22 -- upgrade to 1.22 - -* Mon Aug 22 2005 Levente Farkas 1.21 -- spec file update from Luigi Iotti - -* Thu Apr 28 2005 Levente Farkas 1.21 -- update to 1.21 - -* Tue Mar 8 2005 Levente Farkas 1.18 -- update to 1.18 - -* Tue Dec 14 2004 Levente Farkas 1.17 -- update to 1.17 - -* Wed Jul 14 2004 Levente Farkas 1.14 -- guard the pre and post scripts - -* Wed Jul 7 2004 Levente Farkas 1.13 -- initial release 1.13 - diff --git a/postgrey.sysconfig b/postgrey.sysconfig deleted file mode 100644 index b2aa724..0000000 --- a/postgrey.sysconfig +++ /dev/null @@ -1,25 +0,0 @@ -# Postgrey offers 2 listening types, --inet and --unix. As default, Fedora -# postgrey works under UNIX socket, but, changing to TCP socket on user's own -# is also available, for instance, let it work at 10023 port of localhost: -# --inet=10023 -# To be more detailed, there is another way if you still run it at localhost: -# --inet=127.0.0.1:10023 -POSTGREY_TYPE="--unix=/var/spool/postfix/postgrey/socket" - -# If postgrey works under UNIX socket way, PID file can be specified to -# custom location, note that no need to set this if postgrey is working -# under TCP socket way. -POSTGREY_PID="--pidfile=/var/run/postgrey.pid" - -# Name of group which postgrey belongs, default is postgrey -POSTGREY_GROUP="--group=postgrey" - -# Name of user which postgrey belongs, default is postgrey -POSTGREY_USER="--user=postgrey" - -# DELAY -POSTGREY_DELAY="--delay=60" - -# For more options can be used, please read manpage or execute `postgrey -h`. -# Custom options. -POSTGREY_OPTS="" diff --git a/sources b/sources deleted file mode 100644 index eaf5fbc..0000000 --- a/sources +++ /dev/null @@ -1 +0,0 @@ -SHA512 (postgrey-1.37.tar.gz) = 369968212ea60539efc0d4a7ae84f7c3ce13f5622e6ee070a0089423ef81ca8f7541ebd20289291d0e6a3aec2ca30dbc9c0d9c0a6f0a686adfadb5d0dd7830ca