Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild

See https://fedoraproject.org/wiki/Changes/RPMSuportForSystemdSysusers.

.gitignore

@@ -0,0 +1,4 @@
+postgrey-1.32.tar.gz
+/postgrey-1.34.tar.gz
+/postgrey-1.36.tar.gz
+/postgrey-1.37.tar.gz

README-rpm

@@ -0,0 +1,34 @@
+1. To make use of postgrey in postfix, edit postfix configuration file:
+
+/etc/postfix/main.cf:
+
+  smtpd_recipient_restrictions = ...
+    check_policy_service unix:postgrey/socket, ...
+
+Or if TCP sockets (modify IP / port if needed) is preferred, first change
+POSTGREY_TYPE:
+
+/etc/sysconfig/postgrey:
+
+  POSTGREY_TYPE="--inet=127.0.0.1:10023"
+
+then modify postfix configuration file:
+
+/etc/postfix/main.cf:
+
+  smtpd_recipient_restrictions = ...
+    check_policy_service inet:127.0.0.1:10023, ...
+
+After above steps, please restart the postfix service to make sure postfix has
+loaded the changes. And don't forget to activate the service on startup!
+
+2. If --privacy option is passed to postgrey in /etc/sysconfig/postgrey, make
+sure perl(Digest::SHA) is installed, using dnf to install if not available:
+
+    dnf install perl\(Digest::SHA\)
+
+Don't forget to escape the parentheses if other perl modules are absent.
+
+3. Postgrey could be used with exim if you want, but need to modify the
+systemd service file like removing the dependency of postfix.service. More
+details in README.exim underneath /usr/share/doc/postgrey.

dead.package

@@ -1 +0,0 @@
-epel8-playground decommissioned : https://pagure.io/epel/issue/136

postgrey.init

@@ -0,0 +1,113 @@
+#!/bin/sh
+#
+# postgrey     Postfix Greylisting Policy Server
+#
+# chkconfig:   - 79 31
+# description: Postfix Greylisting Policy Server
+
+### BEGIN INIT INFO
+# Provides: postgrey
+# Required-Start: $local_fs $network
+# Required-Stop: $local_fs $network
+# Should-Start: 
+# Should-Stop: 
+# Default-Start: 
+# Default-Stop: 0 1 2 3 4 5 6
+# Short-Description: Postfix Greylisting Policy Server
+# Description:       Postgrey is a Postfix policy server implementing
+#                    greylisting. When a request for delivery of a mail is
+#                    received by Postfix via SMTP, the triplet CLIENT_IP /
+#                    SENDER / RECIPIENT is built.  If it is the first time
+#                    that this triplet is seen, or if the triplet was first
+#                    seen less than 5 minutes, then the mail gets rejected
+#                    with a temporary error.
+### END INIT INFO
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+exec="/usr/sbin/postgrey"
+prog="postgrey"
+options="--unix=/var/spool/postfix/postgrey/socket"
+
+[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
+
+lockfile=/var/lock/subsys/$prog
+
+start() {
+    [ -x $exec ] || exit 5
+    echo -n $"Starting $prog: "
+    daemon $exec -d $options
+    retval=$?
+    echo
+    [ $retval -eq 0 ] && touch $lockfile
+    return $retval
+}
+
+stop() {
+    echo -n $"Stopping $prog: "
+    killproc $prog
+    retval=$?
+    echo
+    [ $retval -eq 0 ] && rm -f $lockfile
+    return $retval
+}
+
+restart() {
+    stop
+    start
+}
+
+reload() {
+    echo -n $"Reloading $prog: "
+    killproc $prog -HUP
+    retval=$?
+    echo
+    return $retval
+}
+
+force_reload() {
+    restart
+}
+
+rh_status() {
+    status $prog
+}
+
+rh_status_q() {
+    rh_status &>/dev/null
+}
+
+
+case "$1" in
+    start)
+        rh_status_q && exit 0
+        $1
+        ;;
+    stop)
+        rh_status_q || exit 0
+        $1
+        ;;
+    restart)
+        $1
+        ;;
+    reload)
+        rh_status_q || exit 7
+        $1
+        ;;
+    force-reload)
+        force_reload
+        ;;
+    status)
+        rh_status
+        ;;
+    condrestart|try-restart)
+        rh_status_q || exit 0
+        restart
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
+        exit 2
+esac
+exit $?
+

postgrey.service

@@ -0,0 +1,26 @@
+[Unit]
+Description=Postfix Greylisting Service
+Documentation=man:postgrey(8)
+Before=postfix.service
+
+[Service]
+Type=forking
+EnvironmentFile=-/etc/sysconfig/postgrey
+ExecStartPre=-/bin/rm -f /var/run/postgrey.pid
+PIDFile=/var/run/postgrey.pid
+ExecStart=/usr/sbin/postgrey \
+ $POSTGREY_TYPE \
+ $POSTGREY_PID \
+ $POSTGREY_GROUP \
+ $POSTGREY_USER \
+ '--greylist-text=Greylisted for %%s seconds' \
+ --daemonize \
+ $POSTGREY_DELAY \
+ $POSTGREY_OPTS
+
+Restart=always
+RestartSec=1
+TimeoutSec=5
+
+[Install]
+WantedBy=multi-user.target

postgrey.spec

@@ -0,0 +1,356 @@
+%global confdir %{_sysconfdir}/postfix
+
+Name:              postgrey
+Version:           1.37
+Release:           27%{?dist}
+Summary:           Postfix Greylisting Policy Server
+# File headers only state "GNU GPL", but the LICENSE sections state v2 and "any
+# later version"
+# Automatically converted from old format: GPLv2+ - review is highly recommended.
+License:           GPL-2.0-or-later
+URL:               http://postgrey.schweikert.ch/
+Source0:           http://postgrey.schweikert.ch/pub/postgrey-%{version}.tar.gz
+Source1:           postgrey.service
+Source2:           README-rpm
+Source3:           postgrey.sysconfig
+BuildArch:         noarch
+BuildRequires:     perl-generators
+BuildRequires:     perl-podlators
+BuildRequires:     systemd
+## Note: If --privacy specified, perl(Digest::SHA) will be needed.
+#Requires:          perl(BerkeleyDB)
+#Requires:          perl(Fcntl)
+#Requires:          perl(Getopt::Long)
+#Requires:          perl(IO::Multiplex)
+#Requires:          perl(Net::DNS)
+#Requires:          perl(Net::Server)
+#Requires:          perl(Pod::Usage)
+#Requires:          perl(POSIX)
+#Requires:          perl(strict)
+#Requires:          perl(Sys::Hostname)
+#Requires:          perl(Sys::Syslog)
+# Requiring postfix for its directories and GID.
+Recommends:        postfix
+Requires(post):    systemd
+Requires(preun):   systemd
+Requires(postun):  systemd
+
+%description
+Postgrey is a Postfix policy server implementing greylisting. When a request
+for delivery of a mail is received by Postfix via SMTP, the triplet CLIENT_IP /
+SENDER / RECIPIENT is built. If it is the first time that this triplet is
+seen, or if the triplet was first seen less than 5 minutes, then the mail gets
+rejected with a temporary error. Hopefully spammers or viruses will not try
+again later, as it is however required per RFC.
+
+%prep
+%setup -q
+# Set default group tp postgrey.
+sed -i 's|nogroup|postgrey|g' postgrey
+# No perldoc, man is enough.
+sed -i 's|POD ||g;s|perldoc|man|g' README
+install -pm0644 %{SOURCE2} README.Fedora
+
+# Create a sysusers.d config file
+cat >postgrey.sysusers.conf <<EOF
+u postgrey - 'Postfix Greylisting Service' %{_localstatedir}/spool/postfix/postgrey -
+EOF
+
+%build
+# We only have perl scripts, so just "build" the man page.
+pod2man \
+    --center="Postgrey Policy Server for Postfix" \
+    --section="8" \
+    --release="Postgrey %{version}" \
+    postgrey > postgrey.8
+
+%install
+# Configuration files.
+mkdir -p %{buildroot}%{confdir}
+install -pm0644 postgrey_whitelist_{clients,recipients} \
+    %{buildroot}%{confdir}/
+# Local whitelist file.
+echo "# Clients that should not be greylisted.  See postgrey(8)." \
+    > %{buildroot}%{confdir}/postgrey_whitelist_clients.local
+
+# Main script.
+install -pDm0755 postgrey %{buildroot}%{_sbindir}/postgrey
+
+# Spool directory.
+mkdir -p %{buildroot}%{_localstatedir}/spool/postfix/postgrey
+
+# Systemd service.
+install -pDm0644 %{SOURCE1} \
+    %{buildroot}%{_unitdir}/postgrey.service
+
+# Sysconfig file.
+install -pDm0644 %{SOURCE3} \
+    %{buildroot}%{_sysconfdir}/sysconfig/postgrey
+
+# Manpage.
+install -pDm0644 postgrey.8 \
+    %{buildroot}%{_mandir}/man8/postgrey.8
+
+# Optional report script.
+install -pDm0755 contrib/postgreyreport \
+    %{buildroot}%{_sbindir}/postgreyreport
+
+install -m0644 -D postgrey.sysusers.conf %{buildroot}%{_sysusersdir}/postgrey.conf
+
+
+%post
+%systemd_post postgrey.service
+
+%preun
+%systemd_preun postgrey.service
+
+%postun
+%systemd_postun postgrey.service
+
+%triggerun -- postgrey < 1.34-3
+# Save the current service runlevel info
+# User must manually run systemd-sysv-convert --apply postgrey
+# to migrate them to systemd targets
+/usr/bin/systemd-sysv-convert --save postgrey >/dev/null 2>&1 ||:
+
+# Run these because the SysV package being removed won't do them
+/sbin/chkconfig --del postgrey >/dev/null 2>&1 || :
+/bin/systemctl try-restart postgrey.service >/dev/null 2>&1 || :
+
+%files
+%doc Changes README README.exim README.Fedora
+%license COPYING
+%{_unitdir}/postgrey.service
+%{_sysconfdir}/sysconfig/postgrey
+%config(noreplace) %{confdir}/postgrey_whitelist_clients
+%config(noreplace) %{confdir}/postgrey_whitelist_recipients
+%config(noreplace) %{confdir}/postgrey_whitelist_clients.local
+%{_sbindir}/postgrey
+%{_sbindir}/postgreyreport
+%{_mandir}/man8/postgrey.8*
+%dir %attr(0751,postgrey,postfix) %{_localstatedir}/spool/postfix/postgrey/
+%{_sysusersdir}/postgrey.conf
+
+%changelog
+* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-27
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Tue Feb 11 2025 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.37-26
+- Add sysusers.d config file to allow rpm to create users/groups automatically
+
+* Sat Jan 18 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-25
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Fri Jul 26 2024 Miroslav Suchý <msuchy@redhat.com> - 1.37-24
+- convert license to SPDX
+
+* Fri Jul 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-23
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Fri Jan 26 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-22
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-21
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Fri Jul 21 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-20
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Fri Jan 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-19
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Fri Jul 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-18
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Mon May 30 2022 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-17
+- Perl 5.36 rebuild
+
+* Fri Jan 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-16
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-15
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Fri May 21 2021 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-14
+- Perl 5.34 rebuild
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Mon Jun 22 2020 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-11
+- Perl 5.32 rebuild
+
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu May 30 2019 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-8
+- Perl 5.30 rebuild
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Thu Jun 28 2018 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-5
+- Perl 5.28 rebuild
+
+* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.37-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Sun Jun 04 2017 Jitka Plesnikova <jplesnik@redhat.com> - 1.37-2
+- Perl 5.26 rebuild
+
+* Sat Mar 11 2017 Nils Philippsen <nils@tiptoe.de> - 1.37-1
+- version 1.37
+- fix syntax error in sysconfig file (#1292066)
+
+* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.36-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Sun May 15 2016 Jitka Plesnikova <jplesnik@redhat.com> - 1.36-4
+- Perl 5.24 rebuild
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.36-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Thu Nov 26 2015 Petr Pisar <ppisar@redhat.com> - 1.36-2
+- Rebuild against fixed "file" tool that broke Perl dependencies (bug #1279401)
+
+* Fri Sep 04 2015 Christopher Meng <rpm@cicku.me> - 1.36-1
+- Update to 1.36 (1.35 skipped)
+- Refine release section of postgrey manpage.
+- Refine configuration instructions.
+
+* Thu Jun 18 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-17
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Wed Jun 03 2015 Jitka Plesnikova <jplesnik@redhat.com> - 1.34-16
+- Perl 5.22 rebuild
+
+* Fri Nov 07 2014 Petr Pisar <ppisar@redhat.com> - 1.34-15
+- Build-require perl-podlators for pod2man (bug #1161477)
+
+* Wed Aug 27 2014 Jitka Plesnikova <jplesnik@redhat.com> - 1.34-14
+- Perl 5.20 rebuild
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Thu Feb 06 2014 Christopher Meng <rpm@cicku.me> - 1.34-12
+- Correct the syntax of systemd unit to support option with space-separated content.
+
+* Tue Jan 21 2014 Christopher Meng <rpm@cicku.me> - 1.34-11
+- Let perl magic determine the dependencies.
+- Fix systemd unit typo.
+
+* Tue Jan 14 2014 Christopher Meng <rpm@cicku.me> - 1.34-10
+- Fix typo in the SPEC.
+
+* Sun Jan 12 2014 Christopher Meng <rpm@cicku.me> - 1.34-9
+- Update systemd service unit to be more powerful.
+- SPEC cleanup(BZ#850279).
+- Add missing dependencies(BZ#1039355).
+
+* Wed Jan 01 2014 Nils Philippsen <nils@redhat.com> - 1.34-8
+- make postgrey work with perl 5.18 (#1039551)
+
+* Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 1.34-6
+- Perl 5.18 rebuild
+- Build-require systemd-units
+
+* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Tue Mar 20 2012 Jon Ciesla <limburgher@gmail.com> - 1.34-3
+- Migrate to systemd, BZ 714430.
+
+* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.34-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Tue Jun  7 2011 Matthias Saou <http://freshrpms.net/> 1.34-1
+- Update to 1.34.
+
+* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.32-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.32-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Sun Apr 12 2009 Matthias Saou <http://freshrpms.net/> 1.32-1
+- Update to 1.32.
+- Update init script to the new style.
+- Slightly update README-rpm instructions.
+
+* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org>
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Thu May 22 2008 Matthias Saou <http://freshrpms.net/> 1.31-1
+- Update to 1.31.
+
+* Mon Aug  6 2007 Matthias Saou <http://freshrpms.net/> 1.30-1
+- Update to 1.30.
+- Update License field.
+
+* Fri Jun 22 2007 Matthias Saou <http://freshrpms.net/> 1.28-1
+- Update to 1.28.
+- Update URL to the new homepage.
+
+* Mon Feb 12 2007 Matthias Saou <http://freshrpms.net/> 1.27-4
+- Silence %%setup.
+- Fix init script mode in the srpm.
+- Remove explicit perl(IO::Multiplex) requirement, not needed on FC6 (but
+  probably still on RHEL4).
+- Add a comment line to the empty local whitelist file.
+
+* Mon Dec  4 2006 Matthias Saou <http://freshrpms.net/> 1.27-3
+- Add man page generation (Mike Wohlgemuth).
+
+* Fri Dec  1 2006 Matthias Saou <http://freshrpms.net/> 1.27-2
+- Include postgreyreport script.
+
+* Mon Nov  6 2006 Matthias Saou <http://freshrpms.net/> 1.27-1
+- Spec file cleanup.
+
+* Wed Jan 18 2006 Levente Farkas <lfarkas@lfarkas.org> 1.24
+- some minor changes thanks to Peter Bieringer <pb@bieringer.de>
+
+* Mon Jan 16 2006 Levente Farkas <lfarkas@lfarkas.org> 1.24
+- upgrade to 1.24
+
+* Sun Nov 13 2005 Levente Farkas <lfarkas@lfarkas.org> 1.22
+- upgrade to 1.22
+
+* Mon Aug 22 2005 Levente Farkas <lfarkas@lfarkas.org> 1.21
+- spec file update from Luigi Iotti <luigi@iotti.biz>
+
+* Thu Apr 28 2005 Levente Farkas <lfarkas@lfarkas.org> 1.21
+- update to 1.21
+
+* Tue Mar  8 2005 Levente Farkas <lfarkas@lfarkas.org> 1.18
+- update to 1.18
+
+* Tue Dec 14 2004 Levente Farkas <lfarkas@lfarkas.org> 1.17
+- update to 1.17
+
+* Wed Jul 14 2004 Levente Farkas <lfarkas@lfarkas.org> 1.14
+- guard the pre and post scripts
+
+* Wed Jul  7 2004 Levente Farkas <lfarkas@lfarkas.org> 1.13
+- initial release 1.13
+

postgrey.sysconfig

@@ -0,0 +1,25 @@
+# Postgrey offers 2 listening types, --inet and --unix. As default, Fedora
+# postgrey works under UNIX socket, but, changing to TCP socket on user's own
+# is also available, for instance, let it work at 10023 port of localhost:
+#   --inet=10023
+# To be more detailed, there is another way if you still run it at localhost:
+#   --inet=127.0.0.1:10023
+POSTGREY_TYPE="--unix=/var/spool/postfix/postgrey/socket"
+
+# If postgrey works under UNIX socket way, PID file can be specified to
+# custom location, note that no need to set this if postgrey is working
+# under TCP socket way.
+POSTGREY_PID="--pidfile=/var/run/postgrey.pid"
+
+# Name of group which postgrey belongs, default is postgrey
+POSTGREY_GROUP="--group=postgrey"
+
+# Name of user which postgrey belongs, default is postgrey
+POSTGREY_USER="--user=postgrey"
+
+# DELAY
+POSTGREY_DELAY="--delay=60"
+
+# For more options can be used, please read manpage or execute `postgrey -h`.
+# Custom options.
+POSTGREY_OPTS=""

sources

@@ -0,0 +1 @@
+SHA512 (postgrey-1.37.tar.gz) = 369968212ea60539efc0d4a7ae84f7c3ce13f5622e6ee070a0089423ef81ca8f7541ebd20289291d0e6a3aec2ca30dbc9c0d9c0a6f0a686adfadb5d0dd7830ca