diff --git a/00001-rpath.patch b/00001-rpath.patch index 170908e..778c077 100644 --- a/00001-rpath.patch +++ b/00001-rpath.patch @@ -9,7 +9,7 @@ Subject: [PATCH] 00001: Fixup distutils/unixccompiler.py to remove standard 1 file changed, 9 insertions(+) diff --git a/Lib/distutils/unixccompiler.py b/Lib/distutils/unixccompiler.py -index f0792de74a..4d837936c6 100644 +index d00c48981e..0283a28c19 100644 --- a/Lib/distutils/unixccompiler.py +++ b/Lib/distutils/unixccompiler.py @@ -82,6 +82,15 @@ class UnixCCompiler(CCompiler): diff --git a/00111-no-static-lib.patch b/00111-no-static-lib.patch index b44dbc9..390eed2 100644 --- a/00111-no-static-lib.patch +++ b/00111-no-static-lib.patch @@ -21,10 +21,10 @@ Co-authored-by: Miro Hrončok 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 0c3981c132..5587422ec7 100644 +index 11230fa563..dc763e7197 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -589,7 +589,7 @@ clinic: check-clean-src $(srcdir)/Modules/_blake2/blake2s_impl.c +@@ -588,7 +588,7 @@ clinic: check-clean-src $(srcdir)/Modules/_blake2/blake2s_impl.c $(PYTHON_FOR_REGEN) $(srcdir)/Tools/clinic/clinic.py --make --srcdir $(srcdir) # Build the interpreter @@ -33,7 +33,7 @@ index 0c3981c132..5587422ec7 100644 $(LINKCC) $(PY_CORE_LDFLAGS) $(LINKFORSHARED) -o $@ Programs/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) platform: $(BUILDPYTHON) pybuilddir.txt -@@ -637,12 +637,6 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o +@@ -636,12 +636,6 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build @@ -46,7 +46,7 @@ index 0c3981c132..5587422ec7 100644 libpython$(LDVERSION).so: $(LIBRARY_OBJS) $(DTRACE_OBJS) if test $(INSTSONAME) != $(LDLIBRARY); then \ $(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM); \ -@@ -724,7 +718,7 @@ Makefile Modules/config.c: Makefile.pre \ +@@ -723,7 +717,7 @@ Makefile Modules/config.c: Makefile.pre \ @echo "The Makefile was updated, you may need to re-run make." @@ -55,7 +55,7 @@ index 0c3981c132..5587422ec7 100644 $(LINKCC) $(PY_CORE_LDFLAGS) $(LINKFORSHARED) -o $@ Programs/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) ############################################################################ -@@ -1652,17 +1646,6 @@ libainstall: @DEF_MAKE_RULE@ python-config +@@ -1651,17 +1645,6 @@ libainstall: @DEF_MAKE_RULE@ python-config else true; \ fi; \ done diff --git a/00189-use-rpm-wheels.patch b/00189-use-rpm-wheels.patch index 608d265..e5cf8f7 100644 --- a/00189-use-rpm-wheels.patch +++ b/00189-use-rpm-wheels.patch @@ -8,11 +8,11 @@ We keep them in /usr/share/python-wheels Downstream only: upstream bundles We might eventually pursuit upstream support, but it's low prio --- - Lib/ensurepip/__init__.py | 33 ++++++++++++++++++++++----------- - 1 file changed, 22 insertions(+), 11 deletions(-) + Lib/ensurepip/__init__.py | 37 ++++++++++++++++++++++++++----------- + 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/Lib/ensurepip/__init__.py b/Lib/ensurepip/__init__.py -index 57e576d1a3..5bd16a6c59 100644 +index 2a140a2624..5bd16a6c59 100644 --- a/Lib/ensurepip/__init__.py +++ b/Lib/ensurepip/__init__.py @@ -1,3 +1,5 @@ @@ -21,7 +21,7 @@ index 57e576d1a3..5bd16a6c59 100644 import os import os.path import sys -@@ -6,16 +8,28 @@ import tempfile +@@ -6,13 +8,29 @@ import tempfile import subprocess from importlib import resources @@ -30,13 +30,13 @@ index 57e576d1a3..5bd16a6c59 100644 __all__ = ["version", "bootstrap"] - +-_SETUPTOOLS_VERSION = "58.1.0" +-_PIP_VERSION = "21.2.4" ++ +_WHEEL_DIR = "/usr/share/python-wheels/" - --_SETUPTOOLS_VERSION = "56.0.0" ++ +_wheels = {} - --_PIP_VERSION = "21.1.1" ++ +def _get_most_recent_wheel_version(pkg): + prefix = os.path.join(_WHEEL_DIR, "{}-".format(pkg)) + _wheels[pkg] = {} @@ -51,10 +51,11 @@ index 57e576d1a3..5bd16a6c59 100644 +_SETUPTOOLS_VERSION = _get_most_recent_wheel_version("setuptools") + +_PIP_VERSION = _get_most_recent_wheel_version("pip") - ++ _PROJECTS = [ ("setuptools", _SETUPTOOLS_VERSION, "py3"), -@@ -105,13 +119,10 @@ def _bootstrap(*, root=None, upgrade=False, user=False, + ("pip", _PIP_VERSION, "py3"), +@@ -101,13 +119,10 @@ def _bootstrap(*, root=None, upgrade=False, user=False, # additional paths that need added to sys.path additional_paths = [] for project, version, py_tag in _PROJECTS: diff --git a/00353-architecture-names-upstream-downstream.patch b/00353-architecture-names-upstream-downstream.patch index 5e98140..578e786 100644 --- a/00353-architecture-names-upstream-downstream.patch +++ b/00353-architecture-names-upstream-downstream.patch @@ -34,7 +34,7 @@ Co-authored-by: Miro Hrončok 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/Lib/importlib/_bootstrap_external.py b/Lib/importlib/_bootstrap_external.py -index 7c4157369d..c3b95638a6 100644 +index fe31f437da..b5b70757f0 100644 --- a/Lib/importlib/_bootstrap_external.py +++ b/Lib/importlib/_bootstrap_external.py @@ -1636,7 +1636,7 @@ def _get_supported_file_loaders(): diff --git a/00371-revert-bpo-1596321-fix-threading-_shutdown-for-the-main-thread-gh-28549-gh-28589.patch b/00371-revert-bpo-1596321-fix-threading-_shutdown-for-the-main-thread-gh-28549-gh-28589.patch new file mode 100644 index 0000000..015cb48 --- /dev/null +++ b/00371-revert-bpo-1596321-fix-threading-_shutdown-for-the-main-thread-gh-28549-gh-28589.patch @@ -0,0 +1,103 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Hrn=C4=8Diar?= +Date: Fri, 19 Nov 2021 13:37:16 +0100 +Subject: [PATCH] 00371: Revert "bpo-1596321: Fix threading._shutdown() for the + main thread (GH-28549) (GH-28589)" + +This reverts commit 94d19f606fa18a1c4d2faca1caf2f470a8ce6d46. It +introduced regression causing FreeIPA's tests to fail. + +For more info see: +https://bodhi.fedoraproject.org/updates/FEDORA-2021-e152ce5f31 +https://github.com/GrahamDumpleton/mod_wsgi/issues/730 +--- + Lib/test/test_threading.py | 33 --------------------------------- + Lib/threading.py | 25 ++++++++----------------- + 2 files changed, 8 insertions(+), 50 deletions(-) + +diff --git a/Lib/test/test_threading.py b/Lib/test/test_threading.py +index af480b9014..a57085b75d 100644 +--- a/Lib/test/test_threading.py ++++ b/Lib/test/test_threading.py +@@ -814,39 +814,6 @@ class ThreadTests(BaseTestCase): + threading.Thread(target=noop).start() + # Thread.join() is not called + +- def test_import_from_another_thread(self): +- # bpo-1596321: If the threading module is first import from a thread +- # different than the main thread, threading._shutdown() must handle +- # this case without logging an error at Python exit. +- code = textwrap.dedent(''' +- import _thread +- import sys +- +- event = _thread.allocate_lock() +- event.acquire() +- +- def import_threading(): +- import threading +- event.release() +- +- if 'threading' in sys.modules: +- raise Exception('threading is already imported') +- +- _thread.start_new_thread(import_threading, ()) +- +- # wait until the threading module is imported +- event.acquire() +- event.release() +- +- if 'threading' not in sys.modules: +- raise Exception('threading is not imported') +- +- # don't wait until the thread completes +- ''') +- rc, out, err = assert_python_ok("-c", code) +- self.assertEqual(out, b'') +- self.assertEqual(err, b'') +- + + class ThreadJoinOnShutdown(BaseTestCase): + +diff --git a/Lib/threading.py b/Lib/threading.py +index a3cb245ab9..ca1d6f08c4 100644 +--- a/Lib/threading.py ++++ b/Lib/threading.py +@@ -1433,29 +1433,20 @@ def _shutdown(): + + global _SHUTTING_DOWN + _SHUTTING_DOWN = True ++ # Main thread ++ tlock = _main_thread._tstate_lock ++ # The main thread isn't finished yet, so its thread state lock can't have ++ # been released. ++ assert tlock is not None ++ assert tlock.locked() ++ tlock.release() ++ _main_thread._stop() + + # Call registered threading atexit functions before threads are joined. + # Order is reversed, similar to atexit. + for atexit_call in reversed(_threading_atexits): + atexit_call() + +- # Main thread +- if _main_thread.ident == get_ident(): +- tlock = _main_thread._tstate_lock +- # The main thread isn't finished yet, so its thread state lock can't +- # have been released. +- assert tlock is not None +- assert tlock.locked() +- tlock.release() +- _main_thread._stop() +- else: +- # bpo-1596321: _shutdown() must be called in the main thread. +- # If the threading module was not imported by the main thread, +- # _main_thread is the thread which imported the threading module. +- # In this case, ignore _main_thread, similar behavior than for threads +- # spawned by C libraries or using _thread.start_new_thread(). +- pass +- + # Join all non-deamon threads + while True: + with _shutdown_locks_lock: diff --git a/python3.9.spec b/python3.9.spec index 9abe196..57297c2 100644 --- a/python3.9.spec +++ b/python3.9.spec @@ -13,11 +13,11 @@ URL: https://www.python.org/ # WARNING When rebasing to a new Python version, # remember to update the python3-docs package as well -%global general_version %{pybasever}.5 +%global general_version %{pybasever}.9 #global prerel ... %global upstream_version %{general_version}%{?prerel} Version: %{general_version}%{?prerel:~%{prerel}} -Release: 3%{?dist} +Release: 2%{?dist} License: Python @@ -305,7 +305,7 @@ Patch1: 00001-rpath.patch # See https://bugzilla.redhat.com/show_bug.cgi?id=556092 Patch111: 00111-no-static-lib.patch -# 00189 # 4cb983ce1c5ef32068ca9349203a6f1ef9667451 +# 00189 # d06cf137c00fd3907b436fdb92a8f007a7f2fb50 # Instead of bundled wheels, use our RPM packaged wheels # # We keep them in /usr/share/python-wheels @@ -317,8 +317,8 @@ Patch189: 00189-use-rpm-wheels.patch # The versions are written in Lib/ensurepip/__init__.py, this patch removes them. # When the bundled setuptools/pip wheel is updated, the patch no longer applies cleanly. # In such cases, the patch needs to be amended and the versions updated here: -%global pip_version 21.1.1 -%global setuptools_version 56.0.0 +%global pip_version 21.2.4 +%global setuptools_version 58.1.0 # 00251 # 2eabd04356402d488060bc8fe316ad13fc8a3356 # Change user install location @@ -370,6 +370,17 @@ Patch328: 00328-pyc-timestamp-invalidation-mode.patch # a nightmare because it's basically a binary file. Patch353: 00353-architecture-names-upstream-downstream.patch +# 00371 # 1fc313929648e9b543542de09f59c55e175ac45a +# Revert "bpo-1596321: Fix threading._shutdown() for the main thread (GH-28549) (GH-28589)" +# +# This reverts commit 94d19f606fa18a1c4d2faca1caf2f470a8ce6d46. It +# introduced regression causing FreeIPA's tests to fail. +# +# For more info see: +# https://bodhi.fedoraproject.org/updates/FEDORA-2021-e152ce5f31 +# https://github.com/GrahamDumpleton/mod_wsgi/issues/730 +Patch371: 00371-revert-bpo-1596321-fix-threading-_shutdown-for-the-main-thread-gh-28549-gh-28589.patch + # (New patches go here ^^^) # # When adding new patches to "python" and "python3" in Fedora, EL, etc., @@ -563,6 +574,7 @@ Requires: %{pkgname}-libs%{?_isa} = %{version}-%{release} # But we want them when packages BuildRequire python3-devel Requires: (python-rpm-macros if rpm-build) Requires: (python3-rpm-macros if rpm-build) +Requires: (pyproject-rpm-macros if rpm-build) %if %{without bootstrap} # This is not "API" (packages that need setuptools should still BuildRequire it) @@ -633,6 +645,10 @@ configuration, browsers, and other dialogs. Summary: A GUI toolkit for Python Requires: %{pkgname} = %{version}-%{release} +# The importable module "turtle" is here, so provide python3-turtle. +# (We don't provide python3-turtledemo, that's not too useful when imported.) +%py_provides %{pkgname}-turtle + %description -n %{pkgname}-tkinter The Tkinter (Tk interface) library is a graphical user interface toolkit for the Python programming language. @@ -726,10 +742,10 @@ Requires: tzdata %description Python %{pybasever} package for developers. -This package exists to allow developers to test their code against a newer +This package exists to allow developers to test their code against an older version of Python. This is not a full Python stack and if you wish to run -your applications with Python %{pybasever}, update your Fedora to a newer -version once Python %{pybasever} is stable. +your applications with Python %{pybasever}, see other distributions +that support it, such as CentOS or RHEL or older Fedora releases. %endif # with flatpackage @@ -1778,6 +1794,28 @@ CheckPython optimized # ====================================================== %changelog +* Fri Nov 19 2021 Tomáš Hrnčiar - 3.9.9-2 +- Add patch to revert "bpo-1596321: Fix threading._shutdown() for the main thread" + +* Tue Nov 16 2021 Tomáš Hrnčiar - 3.9.9-1 +- Update to 3.9.9 + +* Mon Nov 08 2021 Tomáš Hrnčiar - 3.9.8-1 +- Update to 3.9.8 + +* Mon Aug 30 2021 Miro Hrončok - 3.9.7-1 +- Update to 3.9.7 + +* Fri Jul 23 2021 Fedora Release Engineering - 3.9.6-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild + +* Fri Jul 16 2021 Petr Viktorin - 3.9.6-2 +- Provide python3-turtle from python3-tkinter +- Require pyproject-rpm-macros from python3-devel + +* Tue Jun 29 2021 Tomas Hrnciar - 3.9.6-1 +- Update to 3.9.6 + * Tue Jun 01 2021 Python Maint - 3.9.5-3 - Rebuilt for Python 3.10 diff --git a/sources b/sources index 373c745..d7b5371 100644 --- a/sources +++ b/sources @@ -1,2 +1,2 @@ -SHA512 (Python-3.9.5.tar.xz) = 7b581af1b3e73695f124ff6a3a960e22104153a5d920ca930c046f42ea313b1e7ec77e39876db2bf5d5da6d7412cb072ff8ae7814dda12c14f9da6c570fb0995 -SHA512 (Python-3.9.5.tar.xz.asc) = cfee8c161447544d6f18c3490b96ce12c8df5e9b143fca09734066f3606abe767cd7b4d05315c691f41c0e565d9585456774c10770ffe2ef7983a911bbcfdb83 +SHA512 (Python-3.9.9.tar.xz) = 0ab29fb9a7ecb808bd08d84d28908d5a934e0f021853da0f7a9c94670eb30c8dbbc233d461afdb3995b0de59275ef7e1de43e82d7f848802cbd6e6e50b7b25a6 +SHA512 (Python-3.9.9.tar.xz.asc) = 84fb739c60216ab9a7a487a0ec4039a7e85c7684ef1f71d8b3bc415ff2ae284f79474103ae05385502bc2510401f8cfb33d84dccf5d0ea9a0dd62528519d935f