diff --git a/.gitignore b/.gitignore
index 4b33380..19ba320 100644
--- a/.gitignore
+++ b/.gitignore
@@ -5,5 +5,14 @@ src_vipa-2.0.4.tar.gz
 /lib-zfcp-hbaapi-2.1.tar.gz
 /src_vipa-2.1.0.tar.gz
 /s390-tools-*.tar.bz2
-/s390-tools-*.tar.gz
-/s390-tools-*-rust-vendor.tar.xz
+/s390-tools-2.0.0.tar.gz
+/s390-tools-2.1.0.tar.gz
+/s390-tools-2.2.0.tar.gz
+/s390-tools-2.3.0.tar.gz
+/s390-tools-2.4.0.tar.gz
+/s390-tools-2.5.0.tar.gz
+/s390-tools-2.6.0.tar.gz
+/s390-tools-2.7.0.tar.gz
+/s390-tools-2.7.1.tar.gz
+/s390-tools-2.8.0.tar.gz
+/s390-tools-2.9.0.tar.gz
diff --git a/20-zipl-kernel.install b/20-zipl-kernel.install
index 8cb8d86..33b7d11 100755
--- a/20-zipl-kernel.install
+++ b/20-zipl-kernel.install
@@ -16,7 +16,6 @@ KERNEL_DIR="${KERNEL_IMAGE%/*}"
 MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
 
 BLS_DIR="/boot/loader/entries"
-ZIPLCFG="/etc/zipl.conf"
 CMDLINE_LINUX_DEBUG=" systemd.log_level=debug systemd.log_target=kmsg"
 LINUX_DEBUG_VERSION_POSTFIX="_with_debugging"
 LINUX_DEBUG_TITLE_POSTFIX=" with debugging"
@@ -54,31 +53,27 @@ EOF
 case "$COMMAND" in
     add)
         if [[ "${KERNEL_DIR}" != "/boot" ]]; then
-            # rename to match the name used in the pseudo-BLS snippet above
-            cp --remove-destination --preserve=timestamps -T "${KERNEL_IMAGE}" "/boot/vmlinuz-${KERNEL_VERSION}"
-            command -v restorecon &>/dev/null && \
-                restorecon -R "/boot/vmlinuz-${KERNEL_VERSION}"
-
             for i in \
+                "$KERNEL_IMAGE" \
                     "$KERNEL_DIR"/System.map \
                     "$KERNEL_DIR"/config \
                     "$KERNEL_DIR"/zImage.stub
             do
                 [[ -e "$i" ]] || continue
-                cp --preserve=timestamps -T "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
+                cp -aT "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
                 command -v restorecon &>/dev/null && \
                     restorecon -R "/boot/${i##*/}-${KERNEL_VERSION}"
             done
             # hmac is .vmlinuz-<version>.hmac so needs a special treatment
             i="$KERNEL_DIR/.${KERNEL_IMAGE##*/}.hmac"
             if [[ -e "$i" ]]; then
-                cp --preserve=timestamps "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+                cp -a "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
                 command -v restorecon &>/dev/null && \
                     restorecon "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
             fi
         fi
 
-        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+        if [[ ! -f /sbin/new-kernel-pkg ]]; then
             declare -a BOOT_OPTIONS
             if [[ -f /etc/kernel/cmdline ]]; then
                 read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
@@ -87,15 +82,21 @@ case "$COMMAND" in
             if ! [[ ${BOOT_OPTIONS[*]} ]]; then
                 read -r -d '' -a line < /proc/cmdline
                 for i in "${line[@]}"; do
-                    [[ "${i#initrd=*}" != "$i" || "${i#BOOT_IMAGE=*}" != "$i" ]] && continue
+                    [[ "${i#initrd=*}" != "$i" ]] && continue
                     BOOT_OPTIONS+=("$i")
                 done
             fi
 
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                echo "Could not determine the kernel command line parameters." >&2
+                echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
+                exit 1
+            fi
+
             [[ -d "$BLS_DIR" ]] || mkdir -m 0700 -p "$BLS_DIR"
             BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
             if [[ -f "${KERNEL_DIR}/bls.conf" ]]; then
-                cp --preserve=timestamps -T "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
+                cp -aT "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
                 sed -i -e "s,^linux.*,linux /boot/vmlinuz-${KERNEL_VERSION},g" "${BLS_TARGET}"
                 sed -i -e "s,^initrd.*,initrd /boot/initramfs-${KERNEL_VERSION}.img,g" "${BLS_TARGET}"
                 sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}#g" "${BLS_TARGET}"
@@ -105,18 +106,9 @@ case "$COMMAND" in
                     "${BOOT_OPTIONS[*]}" >"${BLS_TARGET}"
             fi
 
-            if [[ "$KERNEL_VERSION" == *\+* ]] && [ "x$DEFAULTDEBUG" != "xyes" ]; then
-                UPDATEDEFAULT="no"
-            fi
-
-            if [[ "x$UPDATEDEFAULT" = "xyes" ]]; then
-                TITLE="$(grep '^title[ \t]' "${BLS_TARGET}" | sed -e 's/^title[ \t]*//')"
-                NEWDEFAULT="${TITLE}"
-            fi
-
             if [ "x${MAKEDEBUG}" = "xyes" ]; then
                 BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
-                cp --preserve=timestamps -T  "${BLS_TARGET}" "${BLS_DEBUG}"
+                cp -aT  "${BLS_TARGET}" "${BLS_DEBUG}"
                 TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
 		VERSION="$(grep '^version[ \t]' "${BLS_DEBUG}" | sed -e 's/^version[ \t]*//')"
                 BLSID="$(grep '^id[ \t]' "${BLS_DEBUG}" | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
@@ -124,20 +116,8 @@ case "$COMMAND" in
 		sed -i -e "s/^version.*/version ${VERSION}${LINUX_DEBUG_VERSION_POSTFIX}/" "${BLS_DEBUG}"
                 sed -i -e "s/^id.*/${BLSID}/" "${BLS_DEBUG}"
                 sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}${CMDLINE_LINUX_DEBUG}#" "${BLS_DEBUG}"
-                if [ -n "$NEWDEFAULT" -a "x$DEFAULTDEBUG" = "xyes" ]; then
-                    TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
-                    NEWDEFAULT="${TITLE}"
-                fi
 	    fi
 
-            if [ -n "$NEWDEFAULT" ] && [ -f "${ZIPLCFG}" ]; then
-                if grep -q "^default=" "${ZIPLCFG}"; then
-                    sed -i -e "s,^default=.*,default=${NEWDEFAULT}," "${ZIPLCFG}"
-                else
-                    echo "default=${NEWDEFAULT}" >> "${ZIPLCFG}"
-                fi
-            fi
-
             exit 0
         fi
 
@@ -148,21 +128,10 @@ case "$COMMAND" in
         exit 77
         ;;
     remove)
-        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+        if [[ ! -f /sbin/new-kernel-pkg ]]; then
             ARCH="$(uname -m)"
             BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
-            BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
-
-            if [ -f "${BLS_TARGET}" ] && [ -f "${ZIPLCFG}" ]; then
-                TITLE="$(grep '^title[ \t]' "${BLS_TARGET}" | sed -e 's/^title[ \t]*//')"
-                sed -i -e "/^default=${TITLE}/d" "${ZIPLCFG}"
-            fi
-
-            if [[ -f "${BLS_DEBUG}" ]]; then
-                TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
-                sed -i -e "/^default=${TITLE}/d" "${ZIPLCFG}"
-            fi
-
+            BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/\.${ARCH}/-debug.${ARCH}/")"
             rm -f "${BLS_TARGET}" "${BLS_DEBUG}"
 
             for i in vmlinuz System.map config zImage.stub dtb; do
diff --git a/52-zipl-rescue.install b/52-zipl-rescue.install
index 8acfbe0..a2945f7 100755
--- a/52-zipl-rescue.install
+++ b/52-zipl-rescue.install
@@ -15,7 +15,7 @@ BLS_DIR="/boot/loader/entries"
 [[ "$KERNEL_VERSION" == *\+* ]] && flavor=-"${KERNEL_VERSION##*+}"
 case "$COMMAND" in
     add)
-        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+        if [[ ! -f /sbin/new-kernel-pkg ]]; then
             declare -a BOOT_OPTIONS
             if [[ -f /etc/kernel/cmdline ]]; then
                 read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
@@ -29,6 +29,12 @@ case "$COMMAND" in
                 done
             fi
 
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                echo "Could not determine the kernel command line parameters." >&2
+                echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
+                exit 1
+            fi
+
             BLS_RESCUE="${BLS_DIR}/${MACHINE_ID}-0-rescue.conf"
             if [[ -f "${BLS_RESCUE}" ]] && grep -q '^options.*$kernelopts' "${BLS_RESCUE}"; then
                sed -i -e "s,^linux.*,linux /boot/vmlinuz-0-rescue-${MACHINE_ID},g" "${BLS_RESCUE}"
diff --git a/ccw.udev b/ccw.udev
index c5db932..a12ad05 100644
--- a/ccw.udev
+++ b/ccw.udev
@@ -1,4 +1,13 @@
-ACTION!="add|bind|change", GOTO="ccw_end"
+ACTION!="add|change", GOTO="ccw_end"
 SUBSYSTEM!="ccw", GOTO="ccw_end"
-DRIVER=="ctcm|lcs|qeth", RUN+="ccw_init"
+ATTRS{cutype}=="1731/01", RUN+="ccw_init"
+ATTRS{cutype}=="1731/02", RUN+="ccw_init"
+ATTRS{cutype}=="1731/05", RUN+="ccw_init"
+ATTRS{cutype}=="1731/06", RUN+="ccw_init"
+ATTRS{cutype}=="3088/01", RUN+="ccw_init"
+ATTRS{cutype}=="3088/08", RUN+="ccw_init"
+ATTRS{cutype}=="3088/60", RUN+="ccw_init"
+ATTRS{cutype}=="3088/61", RUN+="ccw_init"
+ATTRS{cutype}=="3088/1e", RUN+="ccw_init"
+ATTRS{cutype}=="3088/1f", RUN+="ccw_init"
 LABEL="ccw_end"
diff --git a/ccw_init b/ccw_init
index 3703eaf..a691ae0 100644
--- a/ccw_init
+++ b/ccw_init
@@ -24,25 +24,6 @@ get_config_line_by_subchannel()
     return 1
 }
 
-# borrowed from network-scrips, initscripts along with the get_config_by_subchannel
-[ -z "$__sed_discard_ignored_files" ] && __sed_discard_ignored_files='/\(~\|\.bak\|\.old\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
-
-get_config_by_subchannel ()
-{
-    LANG=C grep -E -i -l \
-        "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \
-        /etc/sysconfig/network-scripts/ifcfg-* \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
-get_config_by_subchannel_nm ()
-{
-    LANG=C grep -E -i -l \
-        "^s390-subchannels=([0-9]\.[0-9]\.[a-f0-9]+;){0,2}${1};([0-9]\.[0-9]\.[a-f0-9]+;){0,2}$" \
-        /etc/NetworkManager/system-connections/*.nmconnection \
-        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
-}
-
 CHANNEL=${DEVPATH##*/}
 
 if [ $MODE = "dracut" ]; then
@@ -68,19 +49,14 @@ if [ $MODE = "dracut" ]; then
 elif [ $MODE = "normal" ]; then
     NOLOCALE="yes"
 
+    . /etc/sysconfig/network-scripts/network-functions
+
     CONFIG_FILE=$(get_config_by_subchannel $CHANNEL)
 
     if [ -n "$CONFIG_FILE" ]; then
 	. $CONFIG_FILE
     else
-	CONFIG_FILE=$(get_config_by_subchannel_nm $CHANNEL)
-	if [ -n "$CONFIG_FILE" ]; then
-	    NETTYPE=$(sed -nr "/^\[ethernet\]/ { :l /^s390-nettype[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE)
-	    SUBCHANNELS=$(sed -nr "/^\[ethernet\]/ { :l /^s390-subchannels[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE | sed -e "s/;/,/g" -e "s/,$//")
-	    LAYER2=$(sed -nr "/^\[ethernet-s390-options\]/ { :l /^layer2[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE)
-	else
-	    exit 1
-	fi
+	exit 1
     fi
 else
     echo "Unknown mode=$MODE"
diff --git a/device_cio_free b/device_cio_free
index cfdced0..cd2b21f 100644
--- a/device_cio_free
+++ b/device_cio_free
@@ -306,14 +306,6 @@ if [ $MODE_ZNET ]; then
 	eval "$line"
         free_device $SUBCHANNELS
     done
-    for line in $(LANG=C grep -E -i -h \
-	"^s390-subchannels=([0-9]\.[0-9]\.[a-f0-9]+;){2,3}$" \
-	$( (ls /etc/NetworkManager/system-connections/*.nmconnection 2> /dev/null ||  echo "__no_config_file") | \
-        LC_ALL=C sed -e "$__sed_discard_ignored_files") 2> /dev/null)
-    do
-	SUBCHANNELS="$(echo $line | sed -e "s/s390-subchannels=//" -e "s/;/,/g")"
-        free_device $SUBCHANNELS
-    done
 fi
 
 [ -z "$ALL_DEVICES" ] && exit 0
diff --git a/device_cio_free.service b/device_cio_free.service
index b3c0f4d..07a57f5 100644
--- a/device_cio_free.service
+++ b/device_cio_free.service
@@ -1,12 +1,13 @@
 [Unit]
 Description=Free all devices on startup
 DefaultDependencies=no
-Before=sysinit.target systemd-udev-trigger.service
+Before=sysinit.target
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
 ExecStart=/usr/sbin/device_cio_free
+StandardOutput=syslog
 
 [Install]
 WantedBy=sysinit.target
diff --git a/rpminspect.yaml b/rpminspect.yaml
deleted file mode 100644
index 7e19000..0000000
--- a/rpminspect.yaml
+++ /dev/null
@@ -1,9 +0,0 @@
----
-pathmigration:
-    excluded_paths:
-        - /lib/s390-tools
-
-badfuncs:
-    allowed:
-        /usr/bin/qethqoat:
-            - inet_ntoa
diff --git a/s390-tools-zipl-blscfg-rpm-nvr-sort.patch b/s390-tools-zipl-blscfg-rpm-nvr-sort.patch
index 366efba..bb8117d 100644
--- a/s390-tools-zipl-blscfg-rpm-nvr-sort.patch
+++ b/s390-tools-zipl-blscfg-rpm-nvr-sort.patch
@@ -1,234 +1,19 @@
-From b2daaa34776ba6afec879e362378f6f7563590a6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 20 Jun 2022 17:43:05 +0200
-Subject: [PATCH 1/2] Revert "zipl/src: Implement sorting bls entries by
- versions"
-
-This reverts commit a0dba6bfdb50ff373fa710ffe2a307cc0748f18b.
----
- zipl/src/scan.c | 139 ++----------------------------------------------
- 1 file changed, 3 insertions(+), 136 deletions(-)
-
-diff --git a/zipl/src/scan.c b/zipl/src/scan.c
-index 0cea1d4..9352f76 100644
---- a/zipl/src/scan.c
-+++ b/zipl/src/scan.c
-@@ -10,7 +10,6 @@
-  *
-  */
+diff -up s390-tools-2.9.0/zipl/src/Makefile.blscfg-rpm-nvr-sort s390-tools-2.9.0/zipl/src/Makefile
+--- s390-tools-2.9.0/zipl/src/Makefile.blscfg-rpm-nvr-sort	2019-05-22 08:16:17.317273801 -0400
++++ s390-tools-2.9.0/zipl/src/Makefile	2019-05-22 08:18:02.947273801 -0400
+@@ -7,7 +7,7 @@ ALL_CPPFLAGS += -I../include -I../boot \
+ 	    -D_FILE_OFFSET_BITS=64 $(NO_PIE_CFLAGS)
+ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
  
--static const char *VERSION_KEYWORD = "version";
+-libs = $(rootdir)/libutil/libutil.a
++libs = $(rootdir)/libutil/libutil.a -lrpm
  
- /* Need ISOC99 function isblank() in ctype.h */
- #ifndef __USE_ISOC99
-@@ -646,7 +645,7 @@ scan_file(const char* filename, struct scan_token** token)
- 
- 
- static int
--bls_filter_by_names(const struct dirent *ent)
-+bls_filter(const struct dirent *ent)
- {
- 	int offset = strlen(ent->d_name) - strlen(".conf");
- 
-@@ -656,111 +655,13 @@ bls_filter_by_names(const struct dirent *ent)
- 	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
- }
- 
--struct version {
--	char *line; /* pointer to a line with version keyword */
--	int offset; /* offset of version value in the line */
--};
--
--/*
-- * Locate version in bls file represented by ENT
-- */
--static void get_version(const struct dirent *ent, struct version *v)
--{
--	char *line = NULL;
--	size_t len = 0;
--	char *d_name;
--	FILE *stream;
--	ssize_t read;
--
--	memset(v, 0, sizeof(*v));
--	d_name = misc_make_path((char *)blsdir, (char *)ent->d_name);
--	if (!d_name)
--		return;
--
--	stream = fopen(d_name, "r");
--	free(d_name);
--	if (!stream)
--		return;
--
--	while ((read = getline(&line, &len, stream)) != -1) {
--		if (line[read - 1] == '\n') {
--			line[read - 1] = '\0';
--			read--;
--		}
--		if ((size_t)read <= strlen(VERSION_KEYWORD) + 1)
--			continue;
--		if (strcmp(VERSION_KEYWORD, line) > 0)
--			continue;
--		if (!isblank(line[strlen(VERSION_KEYWORD)]))
--			continue;
--		/* skip blanks */
--		v->offset = strlen(VERSION_KEYWORD) + 1;
--		while (v->offset < read - 1 && isblank(line[v->offset]))
--			v->offset++;
--		if (isblank(line[v->offset]))
--			/*
--			 * all characters after the keyword
--			 * are blanks. Invalid version
--			 */
--			continue;
--		v->line = line;
--		fclose(stream);
--		return;
--	}
--	free(line);
--	fclose(stream);
--}
--
--static void put_version(struct version *v)
--{
--	free(v->line);
--}
--
--/**
-- * Check version in bls file represented by ENT.
-- * Return 1 if version is valid. Otherwise return 0
-- */
--static int bls_filter_by_versions(const struct dirent *ent)
--{
--	struct version v;
--
--	if (bls_filter_by_names(ent) == 0)
--		return 0;
--
--	get_version(ent, &v);
--	if (v.line) {
--		put_version(&v);
--		return 1;
--	}
--	return 0;
--}
--
- 
- static int
--bls_sort_by_names(const struct dirent **ent_a, const struct dirent **ent_b)
-+bls_sort(const struct dirent **ent_a, const struct dirent **ent_b)
- {
- 	return strverscmp((*ent_a)->d_name, (*ent_b)->d_name);
- }
- 
--static int
--bls_sort_by_versions(const struct dirent **ent_a, const struct dirent **ent_b)
--{
--	struct version v1, v2;
--	int ret;
--
--	get_version(*ent_a, &v1);
--	get_version(*ent_b, &v2);
--	/*
--	 * Both versions are valid.
--	 * It is guaranteed by bls_filter_by_versions()
--	 */
--	ret = strverscmp(v1.line + v1.offset, v2.line + v2.offset);
--
--	put_version(&v1);
--	put_version(&v2);
--
--	return ret;
--}
- 
- static int
- scan_append_section_heading(struct scan_token* scan, int* index, char* name);
-@@ -1110,40 +1011,6 @@ scan_count_target_keywords(char* keyword[])
- 	return num;
- }
- 
--static int bls_scandir(struct dirent ***bls_entries)
--{
--	struct dirent **entries1;
--	struct dirent **entries2;
--	int n1, n2;
--
--	/* arrange by names */
--	n1 = scandir(blsdir, &entries1,
--		     bls_filter_by_names, bls_sort_by_names);
--	if (n1 <= 0)
--		return n1;
--	/* arrange by versions */
--	n2 = scandir(blsdir, &entries2,
--		     bls_filter_by_versions, bls_sort_by_versions);
--
--	if (n2 <= 0 || n2 < n1) {
--		/*
--		 * failed to sort by versions,
--		 * fall back to sorting by filenames
--		 */
--		*bls_entries = entries1;
--		while (n2--)
--			free(entries2[n2]);
--		free(entries2);
--		return n1;
--	}
--	/* use arrangement by versions */
--	*bls_entries = entries2;
--	while (n1--)
--		free(entries1[n1]);
--	free(entries1);
--	return n2;
--}
--
- int
- scan_check_target_data(char* keyword[], int* line)
- {
-@@ -1464,7 +1331,7 @@ int scan_bls(struct scan_token **token, int scan_size)
- 	if (!(stat(blsdir, &sb) == 0 && S_ISDIR(sb.st_mode)))
- 		return 0;
- 
--	n = bls_scandir(&bls_entries);
-+	n = scandir(blsdir, &bls_entries, bls_filter, bls_sort);
- 	if (n <= 0)
- 		return n;
- 
--- 
-2.39.2
-
-
-From 692e70bcfc32a05e30146bd7077c41e0eaceff03 Mon Sep 17 00:00:00 2001
-From: Peter Jones <pjones@redhat.com>
-Date: Mon, 20 Jun 2022 17:46:59 +0200
-Subject: [PATCH 2/2] blscfg: sort like rpm nvr, not like a single version
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Peter Jones <pjones@redhat.com>
-Signed-off-by: Dan Horák <dan@danny.cz>
----
- zipl/src/Makefile |  1 +
- zipl/src/scan.c   | 96 ++++++++++++++++++++++++++++++++++++++++++++++-
- 2 files changed, 95 insertions(+), 2 deletions(-)
-
-diff --git a/zipl/src/Makefile b/zipl/src/Makefile
-index cab5655..7ec215d 100644
---- a/zipl/src/Makefile
-+++ b/zipl/src/Makefile
-@@ -9,6 +9,7 @@ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
- 
- libs =  $(rootdir)/libutil/libutil.a \
- 	$(rootdir)/libvtoc/libvtoc.a \
-+	-lrpmio -lrpm
- 
- objects = misc.o error.o scan.o job.o boot.o bootmap.o fs-map.o disk.o \
- 	  bootmap_header.o envblk.o install.o zipl.o
-diff --git a/zipl/src/scan.c b/zipl/src/scan.c
-index 9352f76..3327e2d 100644
---- a/zipl/src/scan.c
-+++ b/zipl/src/scan.c
-@@ -35,6 +35,8 @@
+ objects = misc.o error.o scan.o job.o boot.o bootmap.o disk.o \
+ 	  install.o zipl.o $(rootdir)/zipl/boot/data.o
+diff -up s390-tools-2.9.0/zipl/src/scan.c.blscfg-rpm-nvr-sort s390-tools-2.9.0/zipl/src/scan.c
+--- s390-tools-2.9.0/zipl/src/scan.c.blscfg-rpm-nvr-sort	2019-05-21 09:13:36.000000000 -0400
++++ s390-tools-2.9.0/zipl/src/scan.c	2019-05-22 08:16:17.317273801 -0400
+@@ -33,6 +33,8 @@
  
  #include "lib/util_base.h"
  
@@ -237,7 +22,7 @@ index 9352f76..3327e2d 100644
  #include "boot.h"
  #include "error.h"
  #include "misc.h"
-@@ -655,13 +657,103 @@ bls_filter(const struct dirent *ent)
+@@ -653,13 +655,103 @@ bls_filter(const struct dirent *ent)
  	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
  }
  
@@ -343,6 +128,3 @@ index 9352f76..3327e2d 100644
  
  static int
  scan_append_section_heading(struct scan_token* scan, int* index, char* name);
--- 
-2.39.2
-
diff --git a/s390-tools-zipl-invert-script-options.patch b/s390-tools-zipl-invert-script-options.patch
index d7d936f..93d5cc7 100644
--- a/s390-tools-zipl-invert-script-options.patch
+++ b/s390-tools-zipl-invert-script-options.patch
@@ -61,10 +61,10 @@ index 871935c783f..d8d5eca5867 100755
  	    ;;
  	--)
  	    shift
-diff --git a/scripts/zipl-switch-to-blscfg.8 b/scripts/zipl-switch-to-blscfg.8
+diff --git a/scripts/zipl-switch-to-blscfg.1 b/scripts/zipl-switch-to-blscfg.1
 index 6bd14d00d14..71b904ffd1c 100644
---- a/scripts/zipl-switch-to-blscfg.8
-+++ b/scripts/zipl-switch-to-blscfg.8
+--- a/scripts/zipl-switch-to-blscfg.1
++++ b/scripts/zipl-switch-to-blscfg.1
 @@ -37,9 +37,9 @@ The DIRECTORY where the BLS fragments will be generated. The directory is create
  The FILE used for zipl configuration file, defaults to /etc/zipl.conf.
  
diff --git a/s390utils-2.40.0-fedora.patch b/s390utils-2.40.0-fedora.patch
deleted file mode 100644
index e69de29..0000000
diff --git a/s390utils.spec b/s390utils.spec
index 7da6a02..b63a6b5 100644
--- a/s390utils.spec
+++ b/s390utils.spec
@@ -1,115 +1,43 @@
-# secure boot support is for RHEL only
-%if 0%{?rhel} >= 8
-%bcond_without signzipl
-%else
-%bcond_with signzipl
-%endif
-
-%if 0%{?fedora}
-%bcond_without pandoc
-%else
-%bcond_with pandoc
-%endif
-
-# Also controls whether %%cargo_generate_buildrequires generates dev-dependencies
-%bcond_without check
+%define vipaver 2.1.0
 
 Name:           s390utils
 Summary:        Utilities and daemons for IBM z Systems
-Version:        2.40.0
-Release:        1%{?dist}
+Version:        2.9.0
+Release:        3%{?dist}
 Epoch:          2
-# MIT covers nearly all the files, except init files (LGPL-2.1-or-later)
-#
-# Statically-linked Rust dependencies contribute additional license terms,
-# listed in the output of %%{cargo_license_summary}:
-#
-# (MIT OR Apache-2.0) AND Unicode-DFS-2016
-# Apache-2.0
-# Apache-2.0 OR BSL-1.0
-# Apache-2.0 OR MIT
-# Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT
-# BSD-2-Clause OR Apache-2.0 OR MIT
-# MIT
-# MIT OR Apache-2.0
-# Unlicense OR MIT
-%global extra_licenses_from_rust_deps %{shrink:
-Apache-2.0 AND
-(Apache-2.0 OR BSL-1.0) AND
-(Apache-2.0 OR MIT) AND
-(Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT) AND
-(BSD-2-Clause OR Apache-2.0 OR MIT) AND
-Unicode-DFS-2016 AND
-(Unlicense OR MIT)
-}
-License:        MIT AND LGPL-2.1-or-later AND %{extra_licenses_from_rust_deps}
-URL:            https://github.com/ibm-s390-linux/s390-tools
-Source0:        https://github.com/ibm-s390-linux/s390-tools/archive/v%{version}.tar.gz#/s390-tools-%{version}.tar.gz
-# To create the vendor tarball:
-#   tar xf s390-tools-%%{version}.tar.gz ; pushd s390-tools-%%{version}/rust ; \
-#   rm -f Cargo.lock && cargo vendor && \
-#   tar Jvcf ../../s390-tools-%%{version}-rust-vendor.tar.xz vendor/ ; popd
-%if 0%{?rhel}
-Source1:        s390-tools-%{version}-rust-vendor.tar.xz
-%endif
-Source5:        https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/zfcpconf.sh
-Source7:        https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/zfcp.udev
-Source12:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/dasd.udev
-Source13:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/dasdconf.sh
-Source14:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/device_cio_free
-Source15:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/device_cio_free.service
-Source16:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/ccw_init
-Source17:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/ccw.udev
-Source21:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/normalize_dasd_arg
-Source23:       20-zipl-kernel.install
-Source24:       52-zipl-rescue.install
-Source25:       91-zipl.install
-
-%if %{with signzipl}
-%define pesign_name redhatsecureboot302
-%endif
+License:        MIT
+ExclusiveArch:  s390 s390x
+#URL:            http://www.ibm.com/developerworks/linux/linux390/s390-tools.html
+URL:            https://github.com/ibm-s390-tools/s390-tools
+Source0:        https://github.com/ibm-s390-tools/s390-tools/archive/v%{version}.tar.gz#/s390-tools-%{version}.tar.gz
+Source5:        zfcpconf.sh
+# http://www.ibm.com/developerworks/linux/linux390/src_vipa-%%{vipaver}.html
+Source6:        http://download.boulder.ibm.com/ibmdl/pub/software/dw/linux390/ht_src/src_vipa-%{vipaver}.tar.gz
+Source7:        zfcp.udev
+# files for DASD initialization
+Source12:       dasd.udev
+Source13:       dasdconf.sh
+Source14:       device_cio_free
+Source15:       device_cio_free.service
+Source16:       ccw_init
+Source17:       ccw.udev
+Source21:       normalize_dasd_arg
+Source22:       20-zipl-kernel.install
+Source23:       52-zipl-rescue.install
+Source24:       91-zipl.install
 
 # change the defaults to match Fedora environment
 Patch0:         s390-tools-zipl-invert-script-options.patch
 Patch1:         s390-tools-zipl-blscfg-rpm-nvr-sort.patch
 
-# upstream fixes/updates
-#Patch100:       s390utils-%%{version}-fedora.patch
-
-# https://fedoraproject.org/wiki/Changes/EncourageI686LeafRemoval
-ExcludeArch:    %{ix86}
-
-# Add Provides for upstream name
-Provides:       s390-tools = %{epoch}:%{version}-%{release}
-
-%ifarch s390x
-#
-# s390x/native package structure
-#
-Requires:       s390utils-core = %{epoch}:%{version}-%{release}
 Requires:       s390utils-base = %{epoch}:%{version}-%{release}
 Requires:       s390utils-osasnmpd = %{epoch}:%{version}-%{release}
 Requires:       s390utils-cpuplugd = %{epoch}:%{version}-%{release}
 Requires:       s390utils-mon_statd = %{epoch}:%{version}-%{release}
 Requires:       s390utils-iucvterm = %{epoch}:%{version}-%{release}
 Requires:       s390utils-ziomon = %{epoch}:%{version}-%{release}
-%else
-#
-# multiarch package structure
-#
-Requires:       s390utils-se-data = %{epoch}:%{version}-%{release}
-%endif
 
-BuildRequires:  make
 BuildRequires:  gcc-c++
-BuildRequires:  glib2-devel
-%if 0%{?rhel}
-BuildRequires:  libcurl-devel
-BuildRequires:  openssl-devel
-BuildRequires:  rust-toolset
-%else
-BuildRequires:  cargo-rpm-macros >= 24
-%endif
 
 %description
 This is a meta package for installing the default s390-tools sub packages.
@@ -120,95 +48,38 @@ The s390utils packages contain a set of user space utilities that should to
 be used together with the zSeries (s390) Linux kernel and device drivers.
 
 %prep
-%autosetup -n s390-tools-%{version} -p1
+%setup -q -n s390-tools-%{version} -a 6
 
-%if 0%{?rhel}
-pushd rust
-tar xf %{SOURCE1}
-%cargo_prep -v vendor
-popd
-%else
-%cargo_prep
-%endif
-rm ./rust/Cargo.lock
+# Fedora/RHEL changes
+%patch0 -p1 -b .zipl-invert-script-options
+%patch1 -p1 -b .blscfg-rpm-nvr-sort
 
-# Create sysusers config files
-echo 'g zkeyadm' > s390utils-base.conf.usr
-echo 'g ts-shell' > s390utils-iucvterm.conf.usr
-echo 'g cpacfstats' > s390utils-cpacfstatsd.conf.usr
 
-# Create tmpfiles config files
-echo 'd /var/log/ts-shell 2770 root ts-shell' > s390utils-iucvterm.conf.tmp
+# remove --strip from install
+find . -name Makefile | xargs sed -i 's/$(INSTALL) -s/$(INSTALL)/g'
 
-%if !0%{?rhel}
-%generate_buildrequires
-pushd rust >/dev/null
-%cargo_generate_buildrequires
-popd >/dev/null
-%endif
 
 %build
 make \
-        CFLAGS="%{build_cflags}" CXXFLAGS="%{build_cxxflags}" LDFLAGS="%{build_ldflags}" \
-        HAVE_DRACUT=1 \
-%if %{with pandoc}
-        ENABLE_DOC=1 \
-%endif
-        NO_PIE_LDFLAGS="" \
-%if "%{_sbindir}" == "%{_bindir}"
-        BINDIR=/usr/bin \
-        USRSBINDIR=/usr/bin \
-%else
+        CFLAGS="%{build_cflags}" CXXFLAGS="%{build_cflags}" LDFLAGS="%{build_ldflags}" \
         BINDIR=/usr/sbin \
-%endif
         DISTRELEASE=%{release} \
         V=1
 
-pushd rust
-%cargo_license_summary
-%{cargo_license} > LICENSE.dependencies
-%if 0%{?rhel}
-%cargo_vendor_manifest
-%endif
+pushd src_vipa-%{vipaver}
+make CC_FLAGS="%{build_cflags} -fPIC" LD_FLAGS="%{build_ldflags} -shared" LIBDIR=%{_libdir}
 popd
 
 
 %install
-%make_install \
+make install \
         HAVE_DRACUT=1 \
-%if %{with pandoc}
-        ENABLE_DOC=1 \
-%endif
-%if "%{_sbindir}" == "%{_bindir}"
-        BINDIR=/usr/bin \
-        USRSBINDIR=/usr/bin \
-%else
+        DESTDIR=%{buildroot} \
         BINDIR=/usr/sbin \
-%endif
         SYSTEMDSYSTEMUNITDIR=%{_unitdir} \
         DISTRELEASE=%{release} \
         V=1
 
-%ifarch s390x
-#
-# s390x/native specific %%install section
-#
-# sign the stage3 bootloader
-%if %{with signzipl}
-if [ -x /usr/bin/rpm-sign ]; then
-    pushd %{buildroot}/lib/s390-tools/
-        rpm-sign --key "%{pesign_name}" --lkmsign stage3.bin --output stage3.signed
-        mv stage3.signed stage3.bin
-    popd
-else
-    echo "rpm-sign not available, stage3 won't be signed"
-fi
-%endif
-
-# move tools to searchable dir
-mv %{buildroot}%{_datadir}/s390-tools/netboot/mk-s390image %{buildroot}%{_bindir}
-mv %{buildroot}%{_datadir}/s390-tools/netboot/mk-s390image.1 %{buildroot}%{_mandir}/man1
-
 mkdir -p %{buildroot}{/boot,%{_udevrulesdir},%{_sysconfdir}/{profile.d,sysconfig},%{_prefix}/lib/modules-load.d}
 install -p -m 644 zipl/boot/tape0.bin %{buildroot}/boot/tape0
 install -p -m 755 %{SOURCE5} %{buildroot}%{_sbindir}
@@ -227,13 +98,17 @@ install -Dp -m 644 etc/modules-load.d/*.conf %{buildroot}%{_prefix}/lib/modules-
 
 # Install kernel-install scripts
 install -d -m 0755 %{buildroot}%{_prefix}/lib/kernel/install.d/
-install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ zfcpdump/10-zfcpdump.install
+install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE22}
 install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE23}
 install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE24}
-install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE25}
 install -d -m 0755 %{buildroot}%{_sysconfdir}/kernel/install.d/
 install -m 0644 /dev/null %{buildroot}%{_sysconfdir}/kernel/install.d/20-grubby.install
 
+# src_vipa
+pushd src_vipa-%{vipaver}
+make install LIBDIR=%{_libdir} SBINDIR=%{_bindir} INSTROOT=%{buildroot} LDCONFIG=/bin/true
+popd
+
 # install usefull headers for devel subpackage
 mkdir -p %{buildroot}%{_includedir}/%{name}
 install -p -m 644 include/lib/vtoc.h %{buildroot}%{_includedir}/%{name}
@@ -254,202 +129,31 @@ install -p -m 644 %{SOURCE17} %{buildroot}%{_udevrulesdir}/81-ccw.rules
 # zipl.conf to be ghosted
 touch %{buildroot}%{_sysconfdir}/zipl.conf
 
-# install systemd sysusers and tmpfiles
-mkdir -p %{buildroot}{%{_sysusersdir},%{_tmpfilesdir}}/
-for f in s390utils-*.conf.usr; do
-    install -p -m 644 $f %{buildroot}%{_sysusersdir}/$(basename -s .usr $f)
-done
-for f in s390utils-*.conf.tmp; do
-    install -p -m 644 $f %{buildroot}%{_tmpfilesdir}/$(basename -s .tmp $f)
-done
-
-%endif
-
-%ifarch s390x
-#
-# s390x/native main %%files section
-#
-%files
-%doc README.md
-
-%else
-#
-# multiarch %%files section
-#
 
 %files
 %doc README.md
-%license LICENSE
-%license rust/LICENSE.dependencies
-%if 0%{?rhel}
-%license rust/cargo-vendor.txt
-%endif
-%{_bindir}/genprotimg
-%{_bindir}/pvattest
-%{_bindir}/pvextract-hdr
-%{_bindir}/pvimg
-%{_bindir}/pvsecret
-%{_bindir}/pvverify
-%{_mandir}/man1/genprotimg.1*
-%{_mandir}/man1/pvattest.1*
-%{_mandir}/man1/pvattest-check.1*
-%{_mandir}/man1/pvattest-create.1*
-%{_mandir}/man1/pvattest-perform.1*
-%{_mandir}/man1/pvattest-verify.1*
-%{_mandir}/man1/pvimg.1*
-%{_mandir}/man1/pvimg-create.1*
-%{_mandir}/man1/pvimg-info.1*
-%{_mandir}/man1/pvimg-test.1*
-%{_mandir}/man1/pvsecret-add.1*
-%{_mandir}/man1/pvsecret-create-association.1*
-%{_mandir}/man1/pvsecret-create-meta.1*
-%{_mandir}/man1/pvsecret-create-retrievable.1*
-%{_mandir}/man1/pvsecret-create-update-cck.1*
-%{_mandir}/man1/pvsecret-create.1*
-%{_mandir}/man1/pvsecret-list.1*
-%{_mandir}/man1/pvsecret-lock.1*
-%{_mandir}/man1/pvsecret-retrieve.1*
-%{_mandir}/man1/pvsecret-verify.1*
-%{_mandir}/man1/pvsecret.1*
-%{_mandir}/man1/pvverify.1*
-%dir %{_datadir}/s390-tools
-%{_datadir}/s390-tools/netboot/
-%{_datadir}/s390-tools/pvimg/
-%{bash_completions_dir}/*.bash
-%{zsh_completions_dir}/_*
 
 #
-# enf of multi-arch section
+# ************************* s390-tools base package  *************************
 #
-%endif
-
-%ifarch s390x
-#
-# s390x specific sub-packages
-#
-#
-# ************************* s390-tools core package  *************************
-#
-%package core
-License:        MIT
-Summary:        S390 core tools
-Provides:       s390-tools-core = %{epoch}:%{version}-%{release}
-Requires:       coreutils
-Requires:       makedumpfile
-%{?systemd_requires}
-# BRs are covered via the base package
-
-
-%description core
-This package provides minimal set of tools needed to system to boot.
-
-%post core
-%systemd_post device_cio_free.service
-%systemd_post cpi.service
-
-%preun core
-%systemd_preun device_cio_free.service
-%systemd_preun cpi.service
-
-%postun core
-%systemd_postun_with_restart cpi.service
-
-%files core
-%doc README.md zdev/src/chzdev_usage.txt
-%license LICENSE
-%{_sbindir}/chreipl
-%{_sbindir}/chzdev
-%{_sbindir}/cio_ignore
-%{_sbindir}/dasdfmt
-%{_sbindir}/dasdinfo
-%{_sbindir}/fdasd
-%{_sbindir}/lszdev
-%{_sbindir}/vmcp
-%{_sbindir}/zipl
-%{_sbindir}/zipl-editenv
-%dir /lib/s390-tools
-/lib/s390-tools/{zipl,chreipl}_helper.*
-/lib/s390-tools/cpictl
-/lib/s390-tools/stage3.bin
-/lib/s390-tools/zdev_id
-/lib/s390-tools/zdev-from-dasd_mod.dasd
-/lib/s390-tools/zdev-root-update
-/lib/s390-tools/zdev-to-dasd_mod.dasd
-/lib/s390-tools/zdev-to-rd.znet
-/lib/s390-tools/zipl.conf
-%ghost %config(noreplace) %{_sysconfdir}/zipl.conf
-%config(noreplace) %{_sysconfdir}/ziplenv
-%{_unitdir}/cpi.service
-%config(noreplace) %{_sysconfdir}/sysconfig/cpi
-/usr/lib/dracut/modules.d/95zdev/
-/usr/lib/dracut/modules.d/95zdev-kdump/
-%{_mandir}/man5/zipl.conf.5*
-%{_mandir}/man8/chreipl.8*
-%{_mandir}/man8/chzdev.8*
-%{_mandir}/man8/cio_ignore.8*
-%{_mandir}/man8/dasdfmt.8*
-%{_mandir}/man8/dasdinfo.8*
-%{_mandir}/man8/fdasd.8*
-%{_mandir}/man8/lszdev.8*
-%{_mandir}/man8/vmcp.8*
-%{_mandir}/man8/zipl.8*
-%{_mandir}/man8/zipl-editenv.8*
-
-# Additional Fedora/RHEL specific stuff
-%ghost %config(noreplace) %{_sysconfdir}/dasd.conf
-%ghost %config(noreplace) %{_sysconfdir}/zfcp.conf
-%{_sbindir}/dasdconf.sh
-%{_sbindir}/normalize_dasd_arg
-%{_sbindir}/zfcpconf.sh
-%{_sbindir}/device_cio_free
-%{_sbindir}/dasd_cio_free
-%{_sbindir}/zfcp_cio_free
-%{_sbindir}/znet_cio_free
-%{_unitdir}/device_cio_free.service
-/usr/lib/udev/ccw_init
-%{_udevrulesdir}/40-z90crypt.rules
-%{_udevrulesdir}/56-dasd.rules
-%{_udevrulesdir}/56-zfcp.rules
-%{_udevrulesdir}/59-dasd.rules
-%{_udevrulesdir}/59-virtio-blk.rules
-%{_udevrulesdir}/60-readahead.rules
-%{_udevrulesdir}/81-ccw.rules
-%{_udevrulesdir}/81-dpm.rules
-%{_udevrulesdir}/90-cpi.rules
-%{_udevrulesdir}/80-hotplug-cpu.rules
-%{_sysconfdir}/kernel/install.d/20-grubby.install
-%{_prefix}/lib/kernel/install.d/10-zfcpdump.install
-%{_prefix}/lib/kernel/install.d/20-zipl-kernel.install
-%{_prefix}/lib/kernel/install.d/52-zipl-rescue.install
-%{_prefix}/lib/kernel/install.d/91-zipl.install
-%{_prefix}/lib/modules-load.d/s390-pkey.conf
-
-#
-# *********************** s390-tools base package  ***********************
-#
-
 %package base
-License:        MIT AND LGPL-2.1-or-later AND %{extra_licenses_from_rust_deps}
+# src_vipa is CPL
+License:        MIT and CPL
 Summary:        S390 base tools
-Provides:       s390-tools-base = %{epoch}:%{version}-%{release}
-Requires:       coreutils
-Requires:       ethtool
-Requires:       file
-Requires:       gawk
-Requires:       sed
+Requires:       gawk sed coreutils
+Requires:       sysfsutils
 Requires:       sg3_utils
+Requires:       ethtool
+Requires:       network-scripts
 Requires:       tar
-Requires:       s390utils-core = %{epoch}:%{version}-%{release}
-Requires:       s390utils-se-data = %{epoch}:%{version}-%{release}
 %{?systemd_requires}
 BuildRequires:  perl-generators
 BuildRequires:  ncurses-devel
+BuildRequires:  libpfm-devel
 BuildRequires:  glibc-static
 BuildRequires:  cryptsetup-devel >= 2.0.3
 BuildRequires:  json-c-devel
 BuildRequires:  rpm-devel
-BuildRequires:  libxml2-devel
-BuildRequires:  libnl3-devel
 
 
 %description base
@@ -514,6 +218,11 @@ s390 base tools. This collection provides the following utilities:
    * tunedasd:
      Adjust tunable parameters on DASD devices.
 
+   * vmconvert:
+     Convert system dumps created by the z/VM VMDUMP command into dumps with
+     LKCD format. These LKCD dumps can then be analyzed with the dump analysis
+     tool lcrash.
+
    * vmcp:
      Allows Linux users to send commands to the z/VM control program (CP).
      The normal usage is to invoke vmcp with the command you want to
@@ -527,6 +236,9 @@ s390 base tools. This collection provides the following utilities:
      feature. Those traces are filtered with the zfcpdbf script, i.e. merge
      several traces, make it more readable etc.
 
+   * scsi_logging_level:
+     Create, get or set the logging level for the SCSI logging facility.
+
    * zconf:
      Set of scripts to configure and list status information of Linux for
      zSeries IO devices.
@@ -563,185 +275,138 @@ s390 base tools. This collection provides the following utilities:
      - chshut:  Change actions which should be done in case of halt, poff,
                 reboot or panic.
 
-   * cpi:
+    * cpi:
     Allows to set the system and sysplex names from the Linux guest to
     the HMC/SE using the Control Program Identification feature.
 
-   * genprotimg:
-    Tool for the creation of PV images. The image consists of a concatenation of
-    a plain text boot loader, the encrypted components for kernel, initrd, and
-    cmdline, and the integrity-protected PV header, containing metadata necessary for
-    running the guest in PV mode. Protected VMs (PVM) are KVM VMs, where KVM can't
-    access the VM's state like guest memory and guest registers anymore.
-
 For more information refer to the following publications:
    * "Device Drivers, Features, and Commands" chapter "Useful Linux commands"
    * "Using the dump tools"
 
+%pre base
+# check for zkeyadm group and create it
+getent group zkeyadm > /dev/null || groupadd -r zkeyadm
+
 %post base
+%systemd_post cpi.service
+%if 0
+# enable in F-31
+%systemd_post device_cio_free.service
+%else
+# explicit enable for upgrade patch from s390utils-base < 2.6.0-4
+systemctl --no-reload preset device_cio_free.service >/dev/null 2>&1 || :
+%endif
 %systemd_post dumpconf.service
 
 %preun base
+%systemd_preun cpi.service
+%systemd_preun device_cio_free.service
 %systemd_preun dumpconf.service
 
 %postun base
+%systemd_postun_with_restart cpi.service
 %systemd_postun_with_restart dumpconf.service
 
 %files base
-%doc README.md zdev/src/lszdev_usage.txt
-%license rust/LICENSE.dependencies
-%if 0%{?rhel}
-%license rust/cargo-vendor.txt
-%endif
+%doc README.md zdev/src/*.txt
+%doc LICENSE
 %{_sbindir}/chccwdev
 %{_sbindir}/chchp
 %{_sbindir}/chcpumf
-%{_sbindir}/chpstat
+%{_sbindir}/chreipl
 %{_sbindir}/chshut
 %{_sbindir}/chzcrypt
+%{_sbindir}/chzdev
+%{_sbindir}/cio_ignore
+%{_sbindir}/dasdfmt
+%{_sbindir}/dasdinfo
 %{_sbindir}/dasdstat
 %{_sbindir}/dasdview
 %{_sbindir}/dbginfo.sh
-%{_sbindir}/hsavmcore
-%{_sbindir}/hsci
+%{_sbindir}/fdasd
 %{_sbindir}/hyptop
 %{_sbindir}/ip_watcher.pl
 %{_sbindir}/lschp
-%{_sbindir}/lscpumf
 %{_sbindir}/lscss
 %{_sbindir}/lsdasd
-%{_sbindir}/lshwc
-%{_sbindir}/lsluns
 %{_sbindir}/lsqeth
-%{_sbindir}/lspai
+%{_sbindir}/lsluns
 %{_sbindir}/lsreipl
 %{_sbindir}/lsscm
 %{_sbindir}/lsshut
-%{_sbindir}/lsstp
 %{_sbindir}/lstape
 %{_sbindir}/lszcrypt
+%{_sbindir}/lszdev
 %{_sbindir}/lszfcp
-%{_sbindir}/opticsmon
-%{_sbindir}/pai
 %{_sbindir}/qetharp
 %{_sbindir}/qethconf
 %{_sbindir}/qethqoat
-%{_sbindir}/sclpdbf
+%{_sbindir}/scsi_logging_level
 %{_sbindir}/start_hsnc.sh
 %{_sbindir}/tape390_crypt
 %{_sbindir}/tape390_display
 %{_sbindir}/ttyrun
 %{_sbindir}/tunedasd
+%{_sbindir}/vmcp
 %{_sbindir}/vmur
 %{_sbindir}/xcec-bridge
 %{_sbindir}/zcryptctl
 %{_sbindir}/zcryptstats
 %{_sbindir}/zfcpdbf
 %{_sbindir}/zgetdump
+%{_sbindir}/zipl
 %{_sbindir}/zipl-switch-to-blscfg
-%{_sbindir}/zmemtopo
 %{_sbindir}/znetconf
 %{_sbindir}/zpcictl
-%{_bindir}/cpacfinfo
+%{_bindir}/lscpumf
 %{_bindir}/dump2tar
-%{_bindir}/genprotimg
-%{_bindir}/mk-s390image
-%{_bindir}/pvapconfig
-%{_bindir}/pvimg
-%{_bindir}/pvinfo
-%{_bindir}/pvattest
-%{_bindir}/pvextract-hdr
-%{_bindir}/pvsecret
-%{_bindir}/pvverify
+%{_bindir}/vmconvert
 %{_bindir}/zkey
 %{_bindir}/zkey-cryptsetup
-%{_bindir}/zpwr
+%{_unitdir}/cpi.service
 %{_unitdir}/dumpconf.service
-%{_unitdir}/opticsmon.service
 %ghost %config(noreplace) %{_sysconfdir}/zipl.conf
+%config(noreplace) %{_sysconfdir}/sysconfig/cpi
 %config(noreplace) %{_sysconfdir}/sysconfig/dumpconf
-%{_sysconfdir}/mdevctl.d/*
-%{_sysusersdir}/s390utils-base.conf
-/usr/lib/dracut/modules.d/99ngdump/
-/usr/lib/dracut/dracut.conf.d/99-pkey.conf
-# own the mdevctl dirs until new release is available
-%dir /usr/lib/mdevctl
-%dir /usr/lib/mdevctl/scripts.d
-%dir /usr/lib/mdevctl/scripts.d/callouts
-/usr/lib/mdevctl/scripts.d/callouts/ap-check
-/lib/s390-tools/dumpconf
-/lib/s390-tools/lsznet.raw
-%dir /lib/s390-tools/zfcpdump
-/lib/s390-tools/zfcpdump/zfcpdump-initrd
-/lib/s390-tools/znetcontrolunits
-%{_libdir}/libekmfweb.so.*
-%{_libdir}/libkmipclient.so.*
-%dir %{_libdir}/zkey
-%{_libdir}/zkey/zkey-ekmfweb.so
-%{_libdir}/zkey/zkey-kmip.so
-%{_mandir}/man1/cpacfinfo.1*
+/lib/s390-tools/
+/usr/lib/dracut/modules.d/95zdev/
+%{_mandir}/man1/dbginfo.sh.1*
 %{_mandir}/man1/dump2tar.1*
-%{_mandir}/man1/genprotimg.1*
-%{_mandir}/man1/mk-s390image.1*
-%{_mandir}/man1/pvapconfig.1*
-%{_mandir}/man1/pvattest.1*
-%{_mandir}/man1/pvattest-check.1*
-%{_mandir}/man1/pvattest-create.1*
-%{_mandir}/man1/pvattest-perform.1*
-%{_mandir}/man1/pvattest-verify.1*
-%{_mandir}/man1/pvimg.1*
-%{_mandir}/man1/pvimg-create.1*
-%{_mandir}/man1/pvimg-info.1*
-%{_mandir}/man1/pvimg-test.1*
-%{_mandir}/man1/pvsecret-add.1*
-%{_mandir}/man1/pvsecret-create-association.1*
-%{_mandir}/man1/pvsecret-create-meta.1*
-%{_mandir}/man1/pvsecret-create-retrievable.1*
-%{_mandir}/man1/pvsecret-create-update-cck.1*
-%{_mandir}/man1/pvsecret-create.1*
-%{_mandir}/man1/pvsecret-list.1*
-%{_mandir}/man1/pvsecret-lock.1*
-%{_mandir}/man1/pvsecret-retrieve.1*
-%{_mandir}/man1/pvsecret-verify.1*
-%{_mandir}/man1/pvsecret.1*
-%{_mandir}/man1/pvverify.1*
+%{_mandir}/man1/lscpumf.1*
+%{_mandir}/man1/vmconvert.1*
+%{_mandir}/man1/zfcpdbf.1*
+%{_mandir}/man1/zipl-switch-to-blscfg.1*
 %{_mandir}/man1/zkey.1*
 %{_mandir}/man1/zkey-cryptsetup.1*
-%{_mandir}/man1/zkey-ekmfweb.1*
-%{_mandir}/man1/zkey-kmip.1*
-%{_mandir}/man1/zpwr.1*
 %{_mandir}/man4/prandom.4*
-%{_mandir}/man5/hsavmcore.conf.5*
+%{_mandir}/man5/zipl.conf.5*
 %{_mandir}/man8/chccwdev.8*
 %{_mandir}/man8/chchp.8*
 %{_mandir}/man8/chcpumf.8*
-%{_mandir}/man8/chpstat.8*
+%{_mandir}/man8/chreipl.8*
 %{_mandir}/man8/chshut.8*
 %{_mandir}/man8/chzcrypt.8*
+%{_mandir}/man8/chzdev.8*
+%{_mandir}/man8/cio_ignore.8*
+%{_mandir}/man8/dasdfmt.8*
+%{_mandir}/man8/dasdinfo.8*
 %{_mandir}/man8/dasdstat.8*
 %{_mandir}/man8/dasdview.8*
-%{_mandir}/man8/dbginfo.sh.8*
 %{_mandir}/man8/dumpconf.8*
-%{_mandir}/man8/hsavmcore.8*
-%{_mandir}/man8/hsci.8*
+%{_mandir}/man8/fdasd.8*
 %{_mandir}/man8/hyptop.8*
 %{_mandir}/man8/lschp.8*
-%{_mandir}/man8/lscpumf.8*
 %{_mandir}/man8/lscss.8*
 %{_mandir}/man8/lsdasd.8*
-%{_mandir}/man8/lshwc.8*
 %{_mandir}/man8/lsluns.8*
-%{_mandir}/man8/lspai.8*
 %{_mandir}/man8/lsqeth.8*
 %{_mandir}/man8/lsreipl.8*
 %{_mandir}/man8/lsscm.8*
 %{_mandir}/man8/lsshut.8*
-%{_mandir}/man8/lsstp.8*
 %{_mandir}/man8/lstape.8*
 %{_mandir}/man8/lszcrypt.8*
+%{_mandir}/man8/lszdev.8*
 %{_mandir}/man8/lszfcp.8*
-%{_mandir}/man8/opticsmon.8*
-%{_mandir}/man8/pai.8*
 %{_mandir}/man8/qetharp.8*
 %{_mandir}/man8/qethconf.8*
 %{_mandir}/man8/qethqoat.8*
@@ -749,48 +414,56 @@ For more information refer to the following publications:
 %{_mandir}/man8/tape390_display.8*
 %{_mandir}/man8/ttyrun.8*
 %{_mandir}/man8/tunedasd.8*
+%{_mandir}/man8/vmcp.8*
 %{_mandir}/man8/vmur.8*
 %{_mandir}/man8/zcryptctl.8*
 %{_mandir}/man8/zcryptstats.8*
-%{_mandir}/man8/zfcpdbf.8*
 %{_mandir}/man8/zgetdump.8*
-%{_mandir}/man8/zipl-switch-to-blscfg.8*
-%{_mandir}/man8/zmemtopo.8*
 %{_mandir}/man8/znetconf.8*
+%{_mandir}/man8/zipl.8*
 %{_mandir}/man8/zpcictl.8*
-%dir %{_datadir}/s390-tools
+%dir %{_datadir}/s390-tools/
+%{_datadir}/s390-tools/cpumf/
 %{_datadir}/s390-tools/netboot/
-%{bash_completions_dir}/*.bash
-%{zsh_completions_dir}/_*
 %dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey
-%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/kmip
-%dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/kmip/profiles
-%config(noreplace) %attr(0660,root,zkeyadm)%{_sysconfdir}/zkey/kmip/profiles/*.profile
 %dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/repository
-%config(noreplace) %attr(0660,root,zkeyadm)%{_sysconfdir}/zkey/kms-plugins.conf
 
-# Additional Fedora/RHEL specific stuff
+# Additional Redhat specific stuff
 /boot/tape0
+%ghost %config(noreplace) %{_sysconfdir}/dasd.conf
+%ghost %config(noreplace) %{_sysconfdir}/zfcp.conf
+%{_sbindir}/dasdconf.sh
+%{_sbindir}/zfcpconf.sh
+%{_sbindir}/dasd_cio_free
+%{_sbindir}/device_cio_free
+%{_sbindir}/zfcp_cio_free
+%{_sbindir}/znet_cio_free
+%{_sbindir}/normalize_dasd_arg
+%{_unitdir}/device_cio_free.service
+/usr/lib/udev/ccw_init
+%{_udevrulesdir}/40-z90crypt.rules
+%{_udevrulesdir}/56-zfcp.rules
+%{_udevrulesdir}/56-dasd.rules
+%{_udevrulesdir}/59-dasd.rules
+%{_udevrulesdir}/60-readahead.rules
+%{_udevrulesdir}/81-ccw.rules
+%{_udevrulesdir}/90-cpi.rules
+%{_sysconfdir}/kernel/install.d/20-grubby.install
+%{_prefix}/lib/kernel/install.d/20-zipl-kernel.install
+%{_prefix}/lib/kernel/install.d/52-zipl-rescue.install
+%{_prefix}/lib/kernel/install.d/91-zipl.install
+%{_prefix}/lib/modules-load.d/s390-pkey.conf
 
-%package se-data
-License:        MIT
-Summary:        Data for Secure Execution
-Provides:       s390-tools-se-data = %{epoch}:%{version}-%{release}
-BuildArch:      noarch
-
-%description se-data
-%{summary}.
-
-%files se-data
-%dir %{_datadir}/s390-tools
-%{_datadir}/s390-tools/pvimg/
+# src_vipa
+%{_bindir}/src_vipa.sh
+%{_libdir}/src_vipa.so
+%{_mandir}/man8/src_vipa.8*
 
 #
 # *********************** s390-tools osasnmpd package  ***********************
 #
 %package osasnmpd
 Summary:        SNMP sub-agent for OSA-Express cards
-Provides:       s390-tools-osasnmpd = %{epoch}:%{version}-%{release}
 Requires:       net-snmp
 Requires:       psmisc
 BuildRequires:  net-snmp-devel
@@ -810,7 +483,6 @@ ATM Ethernet LAN Emulation in QDIO mode.
 #
 %package mon_statd
 Summary:         Monitoring daemons for Linux in z/VM
-Provides:        s390-tools-mon_statd = %{epoch}:%{version}-%{release}
 Requires:        coreutils
 %{?systemd_requires}
 
@@ -850,7 +522,6 @@ Monitoring daemons for Linux in z/VM:
 #
 %package cpuplugd
 Summary:         Daemon that manages CPU and memory resources
-Provides:        s390-tools-cpuplugd = %{epoch}:%{version}-%{release}
 %{?systemd_requires}
 BuildRequires: systemd
 
@@ -880,7 +551,6 @@ memory can be increased or decreased exploiting the CMM1 feature.
 #
 %package ziomon
 Summary:        S390 ziomon tools
-Provides:       s390-tools-ziomon = %{epoch}:%{version}-%{release}
 Requires:       blktrace
 Requires:       coreutils
 Requires:       device-mapper-multipath
@@ -919,7 +589,6 @@ Tool set to collect data for zfcp performance analysis and report.
 #
 %package iucvterm
 Summary:        z/VM IUCV terminal applications
-Provides:       s390-tools-iucvterm = %{epoch}:%{version}-%{release}
 Requires(pre):  shadow-utils
 Requires(post): grep
 Requires(postun): grep
@@ -936,6 +605,10 @@ active TCP/IP connection between two Linux guest operating systems.
 - ts-shell:  Terminal server shell to authorize and control IUCV terminal
              connections for individual Linux users.
 
+%pre iucvterm
+# check for ts-shell group and create it
+getent group ts-shell > /dev/null || groupadd -r ts-shell
+
 %post iucvterm
 # /etc/shells is provided by "setup"
 grep -q '^/usr/bin/ts-shell$' /etc/shells \
@@ -961,16 +634,13 @@ fi
 %{_bindir}/ts-shell
 %{_sbindir}/chiucvallow
 %{_sbindir}/lsiucvallow
-%{_sysusersdir}/s390utils-iucvterm.conf
-%{_tmpfilesdir}/s390utils-iucvterm.conf
-%ghost %dir %attr(2770,root,ts-shell) /var/log/ts-shell
+%dir %attr(2770,root,ts-shell) /var/log/ts-shell
 %doc iucvterm/doc/ts-shell
 %{_mandir}/man1/iucvconn.1*
 %{_mandir}/man1/iucvtty.1*
 %{_mandir}/man1/ts-shell.1*
 %{_mandir}/man7/af_iucv.7*
 %{_mandir}/man8/chiucvallow.8*
-%{_mandir}/man8/lsiucvallow.8*
 %{_mandir}/man9/hvc_iucv.9*
 %{_unitdir}/iucvtty-login@.service
 %{_unitdir}/ttyrun-getty@.service
@@ -981,10 +651,8 @@ fi
 #
 %package cmsfs-fuse
 Summary:        CMS file system based on FUSE
-BuildRequires:  fuse3-devel
-Requires:       fuse3
-Provides:       s390-tools-cmsfs-fuse = %{epoch}:%{version}-%{release}
-Requires:       glibc-gconv-extra
+BuildRequires:  fuse-devel
+Requires:       fuse
 Obsoletes:      %{name}-cmsfs < 2:2.7.0-3
 
 %description cmsfs-fuse
@@ -1001,10 +669,8 @@ This package contains the CMS file system based on FUSE.
 #
 %package zdsfs
 Summary:        z/OS data set access based on FUSE
-BuildRequires:  fuse3-devel
-BuildRequires:  libcurl-devel
-Requires:       fuse3
-Provides:       s390-tools-zdsfs = %{epoch}:%{version}-%{release}
+BuildRequires:  fuse-devel
+Requires:       fuse
 
 %description zdsfs
 This package contains the z/OS data set access based on FUSE.
@@ -1018,9 +684,8 @@ This package contains the z/OS data set access based on FUSE.
 #
 %package hmcdrvfs
 Summary:       HMC drive file system based on FUSE
-BuildRequires: fuse3-devel
-Requires:      fuse3
-Provides:      s390-tools-hmcdrvfs = %{epoch}:%{version}-%{release}
+BuildRequires: fuse-devel
+Requires:      fuse
 
 %description hmcdrvfs
 This package contains a HMC drive file system based on FUSE and a tool
@@ -1037,13 +702,11 @@ to list files and directories.
 #
 %package cpacfstatsd
 Summary:       Monitor and maintain CPACF activity counters
-Provides:      s390-tools-cpacfstatsd = %{epoch}:%{version}-%{release}
 Requires(post): systemd
 Requires(preun): systemd
 Requires(postun): systemd
 Requires(pre): shadow-utils
 BuildRequires: systemd
-BuildRequires: systemd-devel
 
 %description cpacfstatsd
 The cpacfstats tools provide a client/server application set to monitor
@@ -1058,336 +721,30 @@ and maintain CPACF activity counters.
 %postun cpacfstatsd
 %systemd_postun_with_restart cpacfstatsd.service
 
+%pre cpacfstatsd
+getent group cpacfstats >/dev/null || groupadd -r cpacfstats
+
 %files cpacfstatsd
 %{_bindir}/cpacfstats
 %{_sbindir}/cpacfstatsd
 %{_mandir}/man1/cpacfstats.1*
 %{_mandir}/man8/cpacfstatsd.8*
 %{_unitdir}/cpacfstatsd.service
-%{_sysusersdir}/s390utils-cpacfstatsd.conf
-
-#
-# *********************** chreipl-fcp-mpath package  ***********************
-#
-%package chreipl-fcp-mpath
-Summary:          Use multipath information for re-IPL path failover
-BuildRequires:    make
-BuildRequires:    bash
-BuildRequires:    coreutils
-%if %{with pandoc}
-BuildRequires:    pandoc
-%endif
-BuildRequires:    gawk
-BuildRequires:    gzip
-BuildRequires:    sed
-Provides:         s390-tools-chreipl-fcp-mpath = %{epoch}:%{version}-%{release}
-Requires:         bash
-Requires:         coreutils
-Requires:         util-linux
-Requires:         systemd-udev
-Requires:         device-mapper-multipath
-Requires:         dracut
-
-%description chreipl-fcp-mpath
-The chreipl-fcp-mpath toolset monitors udev events about paths to the re-IPL
-volume. If the currently configured FCP re-IPL path becomes unavailable, the
-toolset checks for operational paths to the same volume. If available, it
-reconfigures the FCP re-IPL settings to use an operational path.
-
-%files chreipl-fcp-mpath
-%doc chreipl-fcp-mpath/README.md
-%if %{with pandoc}
-%doc chreipl-fcp-mpath/README.html
-%endif
-%dir %{_prefix}/lib/chreipl-fcp-mpath/
-%{_prefix}/lib/chreipl-fcp-mpath/*
-%{_prefix}/lib/dracut/dracut.conf.d/70-chreipl-fcp-mpath.conf
-%{_prefix}/lib/udev/chreipl-fcp-mpath-is-ipl-tgt
-%{_prefix}/lib/udev/chreipl-fcp-mpath-is-ipl-vol
-%{_prefix}/lib/udev/chreipl-fcp-mpath-is-reipl-zfcp
-%{_prefix}/lib/udev/chreipl-fcp-mpath-record-volume-identifier
-%{_prefix}/lib/udev/chreipl-fcp-mpath-try-change-ipl-path
-%{_udevrulesdir}/70-chreipl-fcp-mpath.rules
-%{_mandir}/man7/chreipl-fcp-mpath.7*
 
 #
 # *********************** devel package  ***********************
 #
 %package devel
 Summary:        Development files
-Provides: s390-tools-devel = %{epoch}:%{version}-%{release}
-Requires: %{name}-base%{?_isa} = %{epoch}:%{version}-%{release}
 
 %description devel
 User-space development files for the s390/s390x architecture.
 
 %files devel
-%{_includedir}/%{name}/
-%{_includedir}/ekmfweb/
-%{_includedir}/kmipclient/
-%{_libdir}/libekmfweb.so
-%{_libdir}/libkmipclient.so
-
-#
-# end of s390x specific sub-packages
-#
-%endif
+%{_includedir}/%{name}
 
 
 %changelog
-* Tue Jan 06 2026 Dan Horák <dan[at]danny.cz> - 2:2.40.0-1
-- rebased to 2.40.0 (rhbz#2421447)
-
-* Thu Nov 13 2025 Dan Horák <dan[at]danny.cz> - 2:2.39.0-1
-- rebased to 2.39.0 (rhbz#2403755)
-
-* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.38.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Fri Jun 27 2025 Dan Horák <dan[at]danny.cz> - 2:2.38.0-1
-- rebased to 2.38.0 (rhbz#2374765)
-
-* Thu Mar 13 2025 Benjamin A. Beasley <code@musicinmybrain.net> - 2:2.37.0-2
-- Properly generate Rust BuildRequires on Fedora
-- Update License (for s390utils/s390utils-base) to reflect Rust deps.
-
-* Thu Feb 27 2025 Jakub Čajka <jcajka@redhat.com> - 2:2.37.0-1
-- rebased to 2.37.0 (rhbz#2330787)
-
-* Mon Feb 24 2025 Dan Horák <dan[at]danny.cz> - 2:2.36.0-1
-- rebased to 2.36.0 (rhbz#2330787)
-
-* Thu Feb 06 2025 Fabio Valentini <decathorpe@gmail.com> - 2:2.35.0-5
-- Rebuild for openssl crate >= v0.10.70 (RUSTSEC-2025-0004)
-
-* Mon Jan 20 2025 Dan Horák <dan[at]danny.cz> - 2:2.35.0-4
-- fix build with gcc15
-- Resolves: rhbz#2338176
-
-* Wed Jan 15 2025 Zbigniew Jedrzejewski-Szmek <zbyszek@in.waw.pl> - 2:2.35.0-3
-- Add sysusers.d config
-
-* Tue Jan 14 2025 Dan Horák <dan[at]danny.cz> - 2:2.35.0-2
-- updated for https://fedoraproject.org/wiki/Changes/Unify_bin_and_sbin
-
-* Thu Oct 03 2024 Dan Horák <dan[at]danny.cz> - 2:2.35.0-1
-- rebased to 2.35.0 (rhbz#2316232)
-
-* Mon Aug 26 2024 Dan Horák <dan[at]danny.cz> - 2:2.34.0-2
-- don't make Rust warnings fatal
-
-* Mon Aug 12 2024 Dan Horák <dan[at]danny.cz> - 2:2.34.0-1
-- rebased to 2.34.0 (rhbz#2302462)
-
-* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.33.1-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Mon Jul 15 2024 Dan Horák <dan[at]danny.cz> - 2:2.33.1-3
-- "which" is not required any more
-- Revert "zipl/src: Fix problems when target parameters are specified by user"
-
-* Thu Jun 20 2024 Dan Horák <dan[at]danny.cz> - 2:2.33.1-2
-- add which as a dependency for base and ziomon subpackages (RHEL-38488)
-
-* Tue May 28 2024 Dan Horák <dan[at]danny.cz> - 2:2.33.1-1
-- rebased to 2.33.1 (rhbz#2283542)
-
-* Thu Apr 04 2024 Dan Horák <dan[at]danny.cz> - 2:2.32.0-1
-- rebased to 2.32.0 (rhbz#2273003)
-
-* Fri Mar 08 2024 Neal Gompa <ngompa@fedoraproject.org> - 2:2.31.0-2
-- Add 's390-tools' Provides to all packages
-
-* Mon Feb 05 2024 Dan Horák <dan[at]danny.cz> - 2:2.31.0-1
-- rebased to 2.31.0 (rhbz#2262499)
-
-* Thu Jan 25 2024 Dan Horák <dan[at]danny.cz> - 2:2.30.0-2
-- add s390utils-se-data as a noarch subpackage with Secure Execution data files
-
-* Tue Jan 02 2024 Dan Horák <dan[at]danny.cz> - 2:2.30.0-1
-- rebased to 2.30.0 (rhbz#2252519)
-
-* Fri Dec 01 2023 Fabio Valentini <decathorpe@gmail.com> - 2:2.29.0-6
-- Rebuild for openssl crate >= v0.10.60 (RUSTSEC-2023-0044, RUSTSEC-2023-0072)
-
-* Fri Nov 10 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-5
-- enable multi-arch build
-
-* Fri Nov 10 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-4
-- fix upstream kernel installations
-
-* Mon Oct 23 2023 Yaakov Selkowitz <yselkowi@redhat.com> - 2:2.29.0-3
-- Use vendored dependencies in RHEL builds
-
-* Thu Aug 31 2023 Jakub Čajka <jcajka[at]redhat.com> - 2:2.29.0-2
-- enable rust based tools
-
-* Mon Aug 07 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-1
-- rebased to 2.29.0
-
-* Sat Jul 22 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.28.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Tue Jul 11 2023 Dan Horák <dan[at]danny.cz> - 2:2.28.0-1
-- rebased to 2.28.0
-
-* Wed May 31 2023 Dan Horák <dan[at]danny.cz> - 2:2.27.0-1
-- rebased to 2.27.0
-
-* Fri May 19 2023 Petr Pisar <ppisar@redhat.com> - 2:2.26.0-2
-- Rebuild against rpm-4.19 (https://fedoraproject.org/wiki/Changes/RPM-4.19)
-
-* Fri Mar 03 2023 Dan Horák <dan[at]danny.cz> - 2:2.26.0-1
-- rebased to 2.26.0
-
-* Tue Jan 31 2023 Dan Horák <dan[at]danny.cz> - 2:2.25.0-4
-- add post GA fixes
-
-* Mon Jan 23 2023 Dan Horák <dan[at]danny.cz> - 2:2.25.0-3
-- revert the kernel install script change
-
-* Thu Jan 19 2023 Dan Horák <dan[at]danny.cz> - 2:2.25.0-2
-- update kernel install script to write /etc/kernel/cmdline
-
-* Fri Dec 09 2022 Dan Horák <dan[at]danny.cz> - 2:2.25.0-1
-- rebased to 2.25.0
-
-* Tue Nov 22 2022 Dan Horák <dan[at]danny.cz> - 2:2.24.0-2
-- update for Transparent DASD PPRC (Peer-to-Peer Remote Copy) handling
-
-* Thu Nov 10 2022 Dan Horák <dan[at]danny.cz> - 2:2.24.0-1
-- rebased to 2.24.0
-
-* Fri Aug 19 2022 Dan Horák <dan[at]danny.cz> - 2:2.23.0-1
-- rebased to 2.23.0
-
-* Sat Jul 23 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.22.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
-
-* Mon Jun 20 2022 Dan Horák <dan[at]danny.cz> - 2:2.22.0-1
-- rebased to 2.22.0
-
-* Tue May 31 2022 Dan Horák <dan[at]danny.cz> - 2:2.21.0-2
-- do not fail on emtpy /proc/cmdline when installing kernel (#1899759)
-
-* Fri Apr 22 2022 Dan Horák <dan[at]danny.cz> - 2:2.21.0-1
-- rebased to 2.21.0
-
-* Mon Feb 07 2022 Dan Horák <dan[at]danny.cz> - 2:2.20.0-1
-- rebased to 2.20.0
-- switch to fuse3
-
-* Sat Jan 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.19.0-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
-
-* Fri Nov 26 2021 Dan Horák <dan[at]danny.cz> - 2:2.19.0-2
-- update ccw udev rules
-
-* Fri Nov 12 2021 Dan Horák <dan[at]danny.cz> - 2:2.19.0-1
-- rebased to 2.19.0
-- cmsfs-fuse Requires glibc-gconv-extra (#2022652)
-
-* Wed Oct 20 2021 Dan Horák <dan[at]danny.cz> - 2:2.18.0-2
-- move vmcp to core (#1931287)
-
-* Tue Oct 05 2021 Dan Horák <dan[at]danny.cz> - 2:2.18.0-1
-- rebased to 2.18.0
-
-* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.17.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
-
-* Wed Jul 07 2021 Dan Horák <dan[at]danny.cz> - 2:2.17.0-1
-- rebased to 2.17.0
-- zfcpconf: set exit code explicitly (#1977434)
-- mk-s390image script requires file (#1973239)
-- drop obsolete setting from device_cio_free.service (#1972449)
-
-* Mon Mar 01 2021 Dan Horák <dan[at]danny.cz> - 2:2.16.0-2
-- drop superfluous Require from s390utils-base
-
-* Wed Feb 24 2021 Dan Horák <dan[at]danny.cz> - 2:2.16.0-1
-- rebased to 2.16.0
-
-* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.15.1-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
-
-* Tue Jan 05 2021 Dan Horák <dan[at]danny.cz> - 2:2.15.1-4
-- move lszdev to core
-
-* Mon Jan 04 2021 Dan Horák <dan[at]danny.cz> - 2:2.15.1-3
-- move fdasd to core
-
-* Thu Oct 29 2020 Petr Šabata <contyk@redhat.com> - 2:2.15.1-2
-- Fix the development package dependency by adding epoch
-
-* Thu Oct 29 2020 Dan Horák <dan[at]danny.cz> - 2:2.15.1-1
-- rebased to 2.15.1
-
-* Wed Oct 28 2020 Dan Horák <dan[at]danny.cz> - 2:2.15.0-2
-- move mk-s390image to /usr/bin
-
-* Tue Oct 27 2020 Dan Horák <dan[at]danny.cz> - 2:2.15.0-1
-- rebased to 2.15.0
-
-* Wed Oct 07 2020 Dan Horák <dan[at]danny.cz> - 2:2.14.0-4
-- update scripts for https://fedoraproject.org/wiki/Changes/NetworkManager_keyfile_instead_of_ifcfg_rh
-
-* Mon Sep 21 2020 Dan Horák <dan[at]danny.cz> - 2:2.14.0-3
-- rebuilt for net-snmp 5.9
-
-* Wed Aug 26 2020 Dan Horák <dan[at]danny.cz> - 2:2.14.0-2
-- add support for auto LUN scan to zfcpconf.sh (#1552697)
-
-* Tue Aug 25 2020 Dan Horák <dan[at]danny.cz> - 2:2.14.0-1
-- rebased to 2.14.0
-
-* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.13.0-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Fri Jul 03 2020 Javier Martinez Canillas <javierm@redhat.com> - 2:2.13.0-4
-- add a default entry in zipl.conf if there isn't one present (#1698363)
-
-* Tue Jun 09 2020 Jakub Čajka <jcajka@redhat.com> - 2:2.13.0-3
-- split off core package with basic functionalities and reduced deps from base sub-package
-
-* Mon Jun 01 2020 Dan Horák <dan[at]danny.cz> - 2:2.13.0-2
-- avoid dependency on network-scripts (part of PR #4)
-
-* Mon May 11 2020 Dan Horák <dan[at]danny.cz> - 2:2.13.0-1
-- rebased to 2.13.0
-
-* Wed Apr 22 2020 Dan Horák <dan@danny.cz> - 2:2.12.0-4
-- rebuilt for json-c soname bump
-
-* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.12.0-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
-
-* Tue Jan 14 2020 Dan Horák <dan[at]danny.cz> - 2:2.12.0-2
-- fix service order after switching to real root file system (#1790496, #1790790)
-
-* Mon Jan 06 2020 Dan Horák <dan[at]danny.cz> - 2:2.12.0-1
-- rebased to 2.12.0
-
-* Fri Dec 13 2019 Dan Horák <dan[at]danny.cz> - 2:2.11.0-4
-- drop src_vipa (#1781683)
-- kernel-install: skip BOOT_IMAGE param when copying the cmdline to BLS snippets
-
-* Mon Dec 02 2019 Dan Horák <dan[at]danny.cz> - 2:2.11.0-3
-- apply kernel install/update script fixes from #1755899, #1778243
-
-* Mon Dec 02 2019 Dan Horák <dan[at]danny.cz> - 2:2.11.0-2
-- apply kernel install/update script fixes from #1600480, #1665060
-- merge stage3 signing support from RHEL
-
-* Mon Sep 09 2019 Dan Horák <dan[at]danny.cz> - 2:2.11.0-1
-- rebased to 2.11.0
-
-* Mon Aug 05 2019 Dan Horák <dan[at]danny.cz> - 2:2.10.0-1
-- rebased to 2.10.0
-
-* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.9.0-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
-
 * Tue Jul 02 2019 Dan Horák <dan[at]danny.cz> - 2:2.9.0-3
 - fix /tmp being deleted when kernel-core is installed in a container (#1726286) (javierm)
 
diff --git a/sources b/sources
index 8572938..3eb6246 100644
--- a/sources
+++ b/sources
@@ -1,2 +1,2 @@
-SHA512 (s390-tools-2.40.0.tar.gz) = 1943429581b280bf9ea370da3700a234d509837cb45b2354cdf79b38db87d2183010d18d9132defd77b9d8e11b7e002c447ffd7c912e20a50da4cb6877758c0e
-SHA512 (s390-tools-2.40.0-rust-vendor.tar.xz) = fd1894c4e950a3c51054432731a3aeef4318e794aa4af2dc5fed31da16dce2020f014a64241e44766fb40b0fd6c1ac5943366e38dcfebf264875220ecf1285b5
+SHA512 (src_vipa-2.1.0.tar.gz) = 8f6048e82b4bcc479dfb09d62da64b9519f66efc31889ff795ee6ca107e262167df57628c305f1b899c41bb3f035e6309552d8548c890855d319e8e60d6a6cf7
+SHA512 (s390-tools-2.9.0.tar.gz) = 23315e8914a5c797b0678298ff51fd95a3c9f065b0fa9f6cf954573fd5ad394890d7f8dbd9cf2501d845c76c3fe31952b25cb7c2b2d59744305b2f37cf3a65bb
diff --git a/zfcpconf.sh b/zfcpconf.sh
index c3c6bf4..45d10a1 100644
--- a/zfcpconf.sh
+++ b/zfcpconf.sh
@@ -2,12 +2,10 @@
 
 # config file syntax:
 # deviceno   WWPN   FCPLUN
-# deviceno			# allowed when auto LUN scan is enabled and port is in NPIV mode
 #
 # Example:
 # 0.0.4000 0x5005076300C213e9 0x5022000000000000 
 # 0.0.4001 0x5005076300c213e9 0x5023000000000000 
-# 0.0.5000
 #
 #
 # manual setup:
@@ -23,20 +21,12 @@
 CONFIG=/etc/zfcp.conf
 PATH=/bin:/sbin
 
-set_online()
-{
-   DEVICE=$1
-
-   [ `cat /sys/bus/ccw/drivers/zfcp/${DEVICE}/online` = "0" ] \
-      && echo 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE}/online
-}
-
 if [ -f "$CONFIG" ]; then
    if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
       modprobe zfcp
    fi
    if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
-      exit 1
+      return
    fi
    sed 'y/ABCDEF/abcdef/' < $CONFIG | while read line; do
        case $line in
@@ -44,17 +34,6 @@ if [ -f "$CONFIG" ]; then
 	   *)
 	       [ -z "$line" ] && continue
 	       set $line
-	       if [ $# -eq 1 ]; then
-		   DEVICE=${1##*0x}
-		   if [ `cat /sys/module/zfcp/parameters/allow_lun_scan` = "Y" ]; then
-		      set_online ${DEVICE}
-		      grep -q NPIV /sys/bus/ccw/devices/${DEVICE}/host*/fc_host/host*/port_type || \
-		         echo "Error: Only device ID (${DEVICE}) given, but port not in NPIV mode"
-		   else
-		      echo "Error: Only device ID (${DEVICE}) given, but LUN scan is disabled for the zfcp module"
-		   fi
-		   continue
-	       fi
 	       if [ $# -eq 5 ]; then
 		   DEVICE=$1
 		   SCSIID=$2
@@ -67,11 +46,11 @@ if [ -f "$CONFIG" ]; then
 		   WWPN=$2
 		   FCPLUN=$3
 	       fi
-	       set_online ${DEVICE}
+               [ `cat /sys/bus/ccw/drivers/zfcp/${DEVICE}/online` = "0" ] \
+                   && echo 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE}/online
 	       [ ! -d /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/${FCPLUN} ] \
 		   && echo $FCPLUN > /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/unit_add
 	       ;;
        esac
    done
 fi
-exit 0