.gitignore

@@ -5,5 +5,21 @@ src_vipa-2.0.4.tar.gz
 /lib-zfcp-hbaapi-2.1.tar.gz
 /src_vipa-2.1.0.tar.gz
 /s390-tools-*.tar.bz2
-/s390-tools-*.tar.gz
-/s390-tools-*-rust-vendor.tar.xz
+/s390-tools-2.0.0.tar.gz
+/s390-tools-2.1.0.tar.gz
+/s390-tools-2.2.0.tar.gz
+/s390-tools-2.3.0.tar.gz
+/s390-tools-2.4.0.tar.gz
+/s390-tools-2.5.0.tar.gz
+/s390-tools-2.6.0.tar.gz
+/s390-tools-2.7.0.tar.gz
+/s390-tools-2.7.1.tar.gz
+/s390-tools-2.8.0.tar.gz
+/s390-tools-2.9.0.tar.gz
+/s390-tools-2.10.0.tar.gz
+/s390-tools-2.11.0.tar.gz
+/s390-tools-2.12.0.tar.gz
+/s390-tools-2.13.0.tar.gz
+/s390-tools-2.14.0.tar.gz
+/s390-tools-2.15.0.tar.gz
+/s390-tools-2.15.1.tar.gz

20-zipl-kernel.install

@@ -54,25 +54,21 @@ EOF
 case "$COMMAND" in
     add)
         if [[ "${KERNEL_DIR}" != "/boot" ]]; then
-            # rename to match the name used in the pseudo-BLS snippet above
-            cp --remove-destination --preserve=timestamps -T "${KERNEL_IMAGE}" "/boot/vmlinuz-${KERNEL_VERSION}"
-            command -v restorecon &>/dev/null && \
-                restorecon -R "/boot/vmlinuz-${KERNEL_VERSION}"
-
             for i in \
+                "$KERNEL_IMAGE" \
                     "$KERNEL_DIR"/System.map \
                     "$KERNEL_DIR"/config \
                     "$KERNEL_DIR"/zImage.stub
             do
                 [[ -e "$i" ]] || continue
-                cp --preserve=timestamps -T "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
+                cp -aT "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
                 command -v restorecon &>/dev/null && \
                     restorecon -R "/boot/${i##*/}-${KERNEL_VERSION}"
             done
             # hmac is .vmlinuz-<version>.hmac so needs a special treatment
             i="$KERNEL_DIR/.${KERNEL_IMAGE##*/}.hmac"
             if [[ -e "$i" ]]; then
-                cp --preserve=timestamps "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+                cp -a "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
                 command -v restorecon &>/dev/null && \
                     restorecon "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
             fi
@@ -92,10 +88,16 @@ case "$COMMAND" in
                 done
             fi
 
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                echo "Could not determine the kernel command line parameters." >&2
+                echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
+                exit 1
+            fi
+
             [[ -d "$BLS_DIR" ]] || mkdir -m 0700 -p "$BLS_DIR"
             BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
             if [[ -f "${KERNEL_DIR}/bls.conf" ]]; then
-                cp --preserve=timestamps -T "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
+                cp -aT "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
                 sed -i -e "s,^linux.*,linux /boot/vmlinuz-${KERNEL_VERSION},g" "${BLS_TARGET}"
                 sed -i -e "s,^initrd.*,initrd /boot/initramfs-${KERNEL_VERSION}.img,g" "${BLS_TARGET}"
                 sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}#g" "${BLS_TARGET}"
@@ -116,7 +118,7 @@ case "$COMMAND" in
 
             if [ "x${MAKEDEBUG}" = "xyes" ]; then
                 BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
-                cp --preserve=timestamps -T  "${BLS_TARGET}" "${BLS_DEBUG}"
+                cp -aT  "${BLS_TARGET}" "${BLS_DEBUG}"
                 TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
 		VERSION="$(grep '^version[ \t]' "${BLS_DEBUG}" | sed -e 's/^version[ \t]*//')"
                 BLSID="$(grep '^id[ \t]' "${BLS_DEBUG}" | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"

52-zipl-rescue.install

@@ -29,6 +29,12 @@ case "$COMMAND" in
                 done
             fi
 
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                echo "Could not determine the kernel command line parameters." >&2
+                echo "Please specify the kernel command line in /etc/kernel/cmdline!" >&2
+                exit 1
+            fi
+
             BLS_RESCUE="${BLS_DIR}/${MACHINE_ID}-0-rescue.conf"
             if [[ -f "${BLS_RESCUE}" ]] && grep -q '^options.*$kernelopts' "${BLS_RESCUE}"; then
                sed -i -e "s,^linux.*,linux /boot/vmlinuz-0-rescue-${MACHINE_ID},g" "${BLS_RESCUE}"

ccw.udev

@@ -1,4 +1,13 @@
-ACTION!="add|bind|change", GOTO="ccw_end"
+ACTION!="add|change", GOTO="ccw_end"
 SUBSYSTEM!="ccw", GOTO="ccw_end"
-DRIVER=="ctcm|lcs|qeth", RUN+="ccw_init"
+ATTRS{cutype}=="1731/01", RUN+="ccw_init"
+ATTRS{cutype}=="1731/02", RUN+="ccw_init"
+ATTRS{cutype}=="1731/05", RUN+="ccw_init"
+ATTRS{cutype}=="1731/06", RUN+="ccw_init"
+ATTRS{cutype}=="3088/01", RUN+="ccw_init"
+ATTRS{cutype}=="3088/08", RUN+="ccw_init"
+ATTRS{cutype}=="3088/60", RUN+="ccw_init"
+ATTRS{cutype}=="3088/61", RUN+="ccw_init"
+ATTRS{cutype}=="3088/1e", RUN+="ccw_init"
+ATTRS{cutype}=="3088/1f", RUN+="ccw_init"
 LABEL="ccw_end"

device_cio_free.service

@@ -7,6 +7,7 @@ Before=sysinit.target systemd-udev-trigger.service
 Type=oneshot
 RemainAfterExit=yes
 ExecStart=/usr/sbin/device_cio_free
+StandardOutput=syslog
 
 [Install]
 WantedBy=sysinit.target

rpminspect.yaml

@@ -1,9 +0,0 @@
----
-pathmigration:
-    excluded_paths:
-        - /lib/s390-tools
-
-badfuncs:
-    allowed:
-        /usr/bin/qethqoat:
-            - inet_ntoa

s390-tools-zipl-blscfg-rpm-nvr-sort.patch

@@ -1,234 +1,19 @@
-From b2daaa34776ba6afec879e362378f6f7563590a6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 20 Jun 2022 17:43:05 +0200
-Subject: [PATCH 1/2] Revert "zipl/src: Implement sorting bls entries by
- versions"
-
-This reverts commit a0dba6bfdb50ff373fa710ffe2a307cc0748f18b.
----
- zipl/src/scan.c | 139 ++----------------------------------------------
- 1 file changed, 3 insertions(+), 136 deletions(-)
-
-diff --git a/zipl/src/scan.c b/zipl/src/scan.c
-index 0cea1d4..9352f76 100644
---- a/zipl/src/scan.c
-+++ b/zipl/src/scan.c
-@@ -10,7 +10,6 @@
-  *
-  */
+diff -up s390-tools-2.9.0/zipl/src/Makefile.blscfg-rpm-nvr-sort s390-tools-2.9.0/zipl/src/Makefile
+--- s390-tools-2.9.0/zipl/src/Makefile.blscfg-rpm-nvr-sort	2019-05-22 08:16:17.317273801 -0400
++++ s390-tools-2.9.0/zipl/src/Makefile	2019-05-22 08:18:02.947273801 -0400
+@@ -7,7 +7,7 @@ ALL_CPPFLAGS += -I../include -I../boot \
+ 	    -D_FILE_OFFSET_BITS=64 $(NO_PIE_CFLAGS)
+ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
  
--static const char *VERSION_KEYWORD = "version";
+-libs = $(rootdir)/libutil/libutil.a
++libs = $(rootdir)/libutil/libutil.a -lrpmio -lrpm
  
- /* Need ISOC99 function isblank() in ctype.h */
- #ifndef __USE_ISOC99
-@@ -646,7 +645,7 @@ scan_file(const char* filename, struct scan_token** token)
- 
- 
- static int
--bls_filter_by_names(const struct dirent *ent)
-+bls_filter(const struct dirent *ent)
- {
- 	int offset = strlen(ent->d_name) - strlen(".conf");
- 
-@@ -656,111 +655,13 @@ bls_filter_by_names(const struct dirent *ent)
- 	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
- }
- 
--struct version {
--	char *line; /* pointer to a line with version keyword */
--	int offset; /* offset of version value in the line */
--};
--
--/*
-- * Locate version in bls file represented by ENT
-- */
--static void get_version(const struct dirent *ent, struct version *v)
--{
--	char *line = NULL;
--	size_t len = 0;
--	char *d_name;
--	FILE *stream;
--	ssize_t read;
--
--	memset(v, 0, sizeof(*v));
--	d_name = misc_make_path((char *)blsdir, (char *)ent->d_name);
--	if (!d_name)
--		return;
--
--	stream = fopen(d_name, "r");
--	free(d_name);
--	if (!stream)
--		return;
--
--	while ((read = getline(&line, &len, stream)) != -1) {
--		if (line[read - 1] == '\n') {
--			line[read - 1] = '\0';
--			read--;
--		}
--		if ((size_t)read <= strlen(VERSION_KEYWORD) + 1)
--			continue;
--		if (strcmp(VERSION_KEYWORD, line) > 0)
--			continue;
--		if (!isblank(line[strlen(VERSION_KEYWORD)]))
--			continue;
--		/* skip blanks */
--		v->offset = strlen(VERSION_KEYWORD) + 1;
--		while (v->offset < read - 1 && isblank(line[v->offset]))
--			v->offset++;
--		if (isblank(line[v->offset]))
--			/*
--			 * all characters after the keyword
--			 * are blanks. Invalid version
--			 */
--			continue;
--		v->line = line;
--		fclose(stream);
--		return;
--	}
--	free(line);
--	fclose(stream);
--}
--
--static void put_version(struct version *v)
--{
--	free(v->line);
--}
--
--/**
-- * Check version in bls file represented by ENT.
-- * Return 1 if version is valid. Otherwise return 0
-- */
--static int bls_filter_by_versions(const struct dirent *ent)
--{
--	struct version v;
--
--	if (bls_filter_by_names(ent) == 0)
--		return 0;
--
--	get_version(ent, &v);
--	if (v.line) {
--		put_version(&v);
--		return 1;
--	}
--	return 0;
--}
--
- 
- static int
--bls_sort_by_names(const struct dirent **ent_a, const struct dirent **ent_b)
-+bls_sort(const struct dirent **ent_a, const struct dirent **ent_b)
- {
- 	return strverscmp((*ent_a)->d_name, (*ent_b)->d_name);
- }
- 
--static int
--bls_sort_by_versions(const struct dirent **ent_a, const struct dirent **ent_b)
--{
--	struct version v1, v2;
--	int ret;
--
--	get_version(*ent_a, &v1);
--	get_version(*ent_b, &v2);
--	/*
--	 * Both versions are valid.
--	 * It is guaranteed by bls_filter_by_versions()
--	 */
--	ret = strverscmp(v1.line + v1.offset, v2.line + v2.offset);
--
--	put_version(&v1);
--	put_version(&v2);
--
--	return ret;
--}
- 
- static int
- scan_append_section_heading(struct scan_token* scan, int* index, char* name);
-@@ -1110,40 +1011,6 @@ scan_count_target_keywords(char* keyword[])
- 	return num;
- }
- 
--static int bls_scandir(struct dirent ***bls_entries)
--{
--	struct dirent **entries1;
--	struct dirent **entries2;
--	int n1, n2;
--
--	/* arrange by names */
--	n1 = scandir(blsdir, &entries1,
--		     bls_filter_by_names, bls_sort_by_names);
--	if (n1 <= 0)
--		return n1;
--	/* arrange by versions */
--	n2 = scandir(blsdir, &entries2,
--		     bls_filter_by_versions, bls_sort_by_versions);
--
--	if (n2 <= 0 || n2 < n1) {
--		/*
--		 * failed to sort by versions,
--		 * fall back to sorting by filenames
--		 */
--		*bls_entries = entries1;
--		while (n2--)
--			free(entries2[n2]);
--		free(entries2);
--		return n1;
--	}
--	/* use arrangement by versions */
--	*bls_entries = entries2;
--	while (n1--)
--		free(entries1[n1]);
--	free(entries1);
--	return n2;
--}
--
- int
- scan_check_target_data(char* keyword[], int* line)
- {
-@@ -1464,7 +1331,7 @@ int scan_bls(struct scan_token **token, int scan_size)
- 	if (!(stat(blsdir, &sb) == 0 && S_ISDIR(sb.st_mode)))
- 		return 0;
- 
--	n = bls_scandir(&bls_entries);
-+	n = scandir(blsdir, &bls_entries, bls_filter, bls_sort);
- 	if (n <= 0)
- 		return n;
- 
--- 
-2.39.2
-
-
-From 692e70bcfc32a05e30146bd7077c41e0eaceff03 Mon Sep 17 00:00:00 2001
-From: Peter Jones <pjones@redhat.com>
-Date: Mon, 20 Jun 2022 17:46:59 +0200
-Subject: [PATCH 2/2] blscfg: sort like rpm nvr, not like a single version
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Peter Jones <pjones@redhat.com>
-Signed-off-by: Dan Horák <dan@danny.cz>
----
- zipl/src/Makefile |  1 +
- zipl/src/scan.c   | 96 ++++++++++++++++++++++++++++++++++++++++++++++-
- 2 files changed, 95 insertions(+), 2 deletions(-)
-
-diff --git a/zipl/src/Makefile b/zipl/src/Makefile
-index cab5655..7ec215d 100644
---- a/zipl/src/Makefile
-+++ b/zipl/src/Makefile
-@@ -9,6 +9,7 @@ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
- 
- libs =  $(rootdir)/libutil/libutil.a \
- 	$(rootdir)/libvtoc/libvtoc.a \
-+	-lrpmio -lrpm
- 
- objects = misc.o error.o scan.o job.o boot.o bootmap.o fs-map.o disk.o \
- 	  bootmap_header.o envblk.o install.o zipl.o
-diff --git a/zipl/src/scan.c b/zipl/src/scan.c
-index 9352f76..3327e2d 100644
---- a/zipl/src/scan.c
-+++ b/zipl/src/scan.c
-@@ -35,6 +35,8 @@
+ objects = misc.o error.o scan.o job.o boot.o bootmap.o disk.o \
+ 	  install.o zipl.o $(rootdir)/zipl/boot/data.o
+diff -up s390-tools-2.9.0/zipl/src/scan.c.blscfg-rpm-nvr-sort s390-tools-2.9.0/zipl/src/scan.c
+--- s390-tools-2.9.0/zipl/src/scan.c.blscfg-rpm-nvr-sort	2019-05-21 09:13:36.000000000 -0400
++++ s390-tools-2.9.0/zipl/src/scan.c	2019-05-22 08:16:17.317273801 -0400
+@@ -33,6 +33,8 @@
  
  #include "lib/util_base.h"
  
@@ -237,7 +22,7 @@ index 9352f76..3327e2d 100644
  #include "boot.h"
  #include "error.h"
  #include "misc.h"
-@@ -655,13 +657,103 @@ bls_filter(const struct dirent *ent)
+@@ -653,13 +655,103 @@ bls_filter(const struct dirent *ent)
  	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
  }
  
@@ -343,6 +128,3 @@ index 9352f76..3327e2d 100644
  
  static int
  scan_append_section_heading(struct scan_token* scan, int* index, char* name);
--- 
-2.39.2
-

s390-tools-zipl-invert-script-options.patch

@@ -61,10 +61,10 @@ index 871935c783f..d8d5eca5867 100755
  	    ;;
  	--)
  	    shift
-diff --git a/scripts/zipl-switch-to-blscfg.8 b/scripts/zipl-switch-to-blscfg.8
+diff --git a/scripts/zipl-switch-to-blscfg.1 b/scripts/zipl-switch-to-blscfg.1
 index 6bd14d00d14..71b904ffd1c 100644
---- a/scripts/zipl-switch-to-blscfg.8
-+++ b/scripts/zipl-switch-to-blscfg.8
+--- a/scripts/zipl-switch-to-blscfg.1
++++ b/scripts/zipl-switch-to-blscfg.1
 @@ -37,9 +37,9 @@ The DIRECTORY where the BLS fragments will be generated. The directory is create
  The FILE used for zipl configuration file, defaults to /etc/zipl.conf.
  

sources

@@ -1,2 +1 @@
-SHA512 (s390-tools-2.40.0.tar.gz) = 1943429581b280bf9ea370da3700a234d509837cb45b2354cdf79b38db87d2183010d18d9132defd77b9d8e11b7e002c447ffd7c912e20a50da4cb6877758c0e
-SHA512 (s390-tools-2.40.0-rust-vendor.tar.xz) = fd1894c4e950a3c51054432731a3aeef4318e794aa4af2dc5fed31da16dce2020f014a64241e44766fb40b0fd6c1ac5943366e38dcfebf264875220ecf1285b5
+SHA512 (s390-tools-2.15.1.tar.gz) = a62ab491bac153b78161b7b1fb80ef1aa5ddb8657a9329f5ad9f8a16f106a9a9af1a37ceb328ed34eb44adb406207faec12ed0fb6648b5198498bf2fd411f0cf

zfcpconf.sh

@@ -36,7 +36,7 @@ if [ -f "$CONFIG" ]; then
       modprobe zfcp
    fi
    if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
-      exit 1
+      return
    fi
    sed 'y/ABCDEF/abcdef/' < $CONFIG | while read line; do
        case $line in
@@ -74,4 +74,3 @@ if [ -f "$CONFIG" ]; then
        esac
    done
 fi
-exit 0