csh.login: set PATH again (if empty) to prevent interpreter error (#1744106)

aliases: add pcp user (#1744091)
lang.csh: fix several variable substitution bugs and typos (#1746749)
don't set LANG as a per-shell variable
fix lang.csh script so it doesn't break tcsh -e scripts II (#1620004)
use full path for non-builtins in csh.cshrc, csh.login, lang.csh, lang.sh and profile (#1747493)

.gitignore

@@ -1,5 +1,80 @@
-/setup-*.bz2
-/setup-*.gz
-# Autogenerated files:
-/etc
-/sysusers.d
+setup-2.8.23.tar.bz2
+setup-2.8.24.tar.bz2
+setup-2.8.25.tar.bz2
+/setup-2.8.26.tar.bz2
+/setup-2.8.27.tar.bz2
+/setup-2.8.28.tar.bz2
+/setup-2.8.29.tar.bz2
+/setup-2.8.30.tar.bz2
+/setup-2.8.31.tar.bz2
+/setup-2.8.32.tar.bz2
+/setup-2.8.33.tar.bz2
+/setup-2.8.34.tar.bz2
+/setup-2.8.35.tar.bz2
+/setup-2.8.37.tar.bz2
+/setup-2.8.38.tar.bz2
+/setup-2.8.39.tar.bz2
+/setup-2.8.40.tar.bz2
+/setup-2.8.42.tar.bz2
+/setup-2.8.43.tar.bz2
+/setup-2.8.44.tar.bz2
+/setup-2.8.45.tar.bz2
+/setup-2.8.46.tar.bz2
+/setup-2.8.47.tar.bz2
+/setup-2.8.48.tar.bz2
+/setup-2.8.49.tar.bz2
+/setup-2.8.50.tar.bz2
+/setup-2.8.51.tar.bz2
+/setup-2.8.53.tar.bz2
+/setup-2.8.54.tar.bz2
+/setup-2.8.55.tar.bz2
+/setup-2.8.56.tar.bz2
+/setup-2.8.57.tar.bz2
+/setup-2.8.58.tar.bz2
+/setup-2.8.59.tar.bz2
+/setup-2.8.61.tar.bz2
+/setup-2.8.62.tar.bz2
+/setup-2.8.64.tar.bz2
+/setup-2.8.65.tar.bz2
+/setup-2.8.66.tar.bz2
+/setup-2.8.67.tar.bz2
+/setup-2.8.68.tar.bz2
+/setup-2.8.69.tar.bz2
+/setup-2.8.70.tar.bz2
+/setup-2.8.71.tar.bz2
+/setup-2.8.72.tar.bz2
+/setup-2.8.73.tar.bz2
+/setup-2.8.74.tar.bz2
+/setup-2.8.75.tar.bz2
+/setup-2.9.0.tar.bz2
+/setup-2.9.1.tar.bz2
+/setup-2.9.2.tar.bz2
+/setup-2.9.3.tar.bz2
+/setup-2.9.4.tar.bz2
+/setup-2.9.5.tar.bz2
+/setup-2.9.6.tar.bz2
+/setup-2.9.7.tar.bz2
+/setup-2.9.8.tar.bz2
+/setup-2.10.1.tar.bz2
+/setup-2.10.2.tar.bz2
+/setup-2.10.3.tar.bz2
+/setup-2.10.4.tar.bz2
+/setup-2.10.5.tar.bz2
+/setup-2.10.7.tar.bz2
+/setup-2.10.8.tar.bz2
+/setup-2.10.9.tar.bz2
+/setup-2.10.10.tar.bz2
+/setup-2.11.1.tar.bz2
+/setup-2.11.2.tar.bz2
+/setup-2.11.3.tar.bz2
+/setup-2.11.4.tar.bz2
+/setup-2.12.0.tar.bz2
+/setup-2.12.1.tar.bz2
+/setup-2.12.2.tar.bz2
+/setup-2.12.3.tar.bz2
+/setup-2.12.5.tar.bz2
+/setup-2.12.6.tar.bz2
+/setup-2.13.1.tar.bz2
+/setup-2.13.2.tar.bz2
+/setup-2.13.3.tar.bz2
+/setup-2.13.6.tar.bz2

COPYING

@@ -1,4 +0,0 @@
-Setup package is public domain.
-
-You are free to use, copy, distribute or modify included files
-without restrictions.

aliases

@@ -1,97 +0,0 @@
-#
-#  Aliases in this file will NOT be expanded in the header from
-#  Mail, but WILL be visible over networks or from /bin/mail.
-#
-#	>>>>>>>>>>	The program "newaliases" must be run after
-#	>> NOTE >>	this file is updated for any changes to
-#	>>>>>>>>>>	show through to sendmail.
-#
-
-# Basic system aliases -- these MUST be present.
-mailer-daemon:	postmaster
-postmaster:	root
-
-# General redirections for pseudo accounts.
-bin:		root
-daemon:		root
-adm:		root
-lp:		root
-sync:		root
-shutdown:	root
-halt:		root
-mail:		root
-news:		root
-uucp:		root
-operator:	root
-games:		root
-gopher:		root
-ftp:		root
-nobody:		root
-radiusd:	root
-nut:		root
-dbus:		root
-vcsa:		root
-canna:		root
-wnn:		root
-rpm:		root
-nscd:		root
-pcap:		root
-apache:		root
-webalizer:	root
-dovecot:	root
-fax:		root
-quagga:		root
-radvd:		root
-pvm:		root
-amandabackup:		root
-privoxy:	root
-ident:		root
-named:		root
-xfs:		root
-gdm:		root
-mailnull:	root
-postgres:	root
-sshd:		root
-smmsp:		root
-postfix:	root
-netdump:	root
-ldap:		root
-squid:		root
-ntp:		root
-mysql:		root
-desktop:	root
-rpcuser:	root
-rpc:		root
-nfsnobody:	root
-pcp:		root
-
-ingres:		root
-system:		root
-toor:		root
-manager:	root
-dumper:		root
-abuse:		root
-
-newsadm:	news
-newsadmin:	news
-usenet:		news
-ftpadm:		ftp
-ftpadmin:	ftp
-ftp-adm:	ftp
-ftp-admin:	ftp
-www:		webmaster
-webmaster:	root
-noc:		root
-security:	root
-hostmaster:	root
-info:		postmaster
-marketing:	postmaster
-sales:		postmaster
-support:	postmaster
-
-
-# trap decode to catch security attacks
-decode:		root
-
-# Person who should get root's mail
-#root:		marc

bashrc

@@ -1,90 +0,0 @@
-# /etc/bashrc
-
-# System wide functions and aliases
-# Environment stuff goes in /etc/profile
-
-# It's NOT a good idea to change this file unless you know what you
-# are doing. It's much better to create a custom.sh shell script in
-# /etc/profile.d/ to make custom changes to your environment, as this
-# will prevent the need for merging in future updates.
-
-# Prevent doublesourcing
-if [ -z "$BASHRCSOURCED" ]; then
-  BASHRCSOURCED="Y"
-
-  # are we an interactive shell?
-  if [ "$PS1" ]; then
-    if [ -z "$PROMPT_COMMAND" ]; then
-      declare -a PROMPT_COMMAND
-      case $TERM in
-      xterm*)
-        if [ -e /etc/sysconfig/bash-prompt-xterm ]; then
-            PROMPT_COMMAND=/etc/sysconfig/bash-prompt-xterm
-        else
-            PROMPT_COMMAND='printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/\~}"'
-        fi
-        ;;
-      screen*)
-        if [ -e /etc/sysconfig/bash-prompt-screen ]; then
-            PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen
-        else
-            PROMPT_COMMAND='printf "\033k%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/\~}"'
-        fi
-        ;;
-      *)
-        [ -e /etc/sysconfig/bash-prompt-default ] && PROMPT_COMMAND=/etc/sysconfig/bash-prompt-default
-        ;;
-      esac
-    fi
-    # Turn on parallel history
-    shopt -s histappend
-    # Turn on checkwinsize
-    shopt -s checkwinsize
-    # Change the default prompt string
-    [ "$PS1" = "\\s-\\v\\\$ " ] && PS1="[\u@\h \W]\\$ "
-    # You might want to have e.g. tty in prompt (e.g. more virtual machines)
-    # and console windows
-    # If you want to do so, just add e.g.
-    # if [ "$PS1" ]; then
-    #   PS1="[\u@\h:\l \W]\\$ "
-    # fi
-    # to your custom modification shell script in /etc/profile.d/ directory
-  fi
-
-  if ! shopt -q login_shell ; then # We're not a login shell
-    # Need to redefine pathmunge, it gets undefined at the end of /etc/profile
-    pathmunge () {
-        case ":${PATH}:" in
-            *:"$1":*)
-                ;;
-            *)
-                if [ "$2" = "after" ] ; then
-                    PATH=$PATH:$1
-                else
-                    PATH=$1:$PATH
-                fi
-        esac
-    }
-
-    # Set default umask for non-login shell only if it is set to 0
-    [ `umask` -eq 0 ] && umask 022
-
-    SHELL=/bin/bash
-    # Only display echos from profile.d scripts if we are no login shell
-    # and interactive - otherwise just process them to set envvars
-    for i in /etc/profile.d/*.sh; do
-        if [ -r "$i" ]; then
-            if [ "$PS1" ]; then
-                . "$i"
-            else
-                . "$i" >/dev/null
-            fi
-        fi
-    done
-
-    unset i
-    unset -f pathmunge
-  fi
-
-fi
-# vim:ts=4:sw=4

csh.cshrc

@@ -1,66 +0,0 @@
-# /etc/cshrc
-#
-# csh configuration for all shell invocations.
-
-# Set default umask for non-login shell only if it is set to 0
-if ( `umask` == 0 ) then
-    umask 022
-endif
-
-if ($?prompt) then
-  if ($?tcsh) then
-    set promptchars='$#'
-    set prompt='[%n@%m %c]%# '
-    # make completion work better by default
-    set autolist
-  else
-    set prompt=\[$user@`/usr/bin/hostname`\]\$\ 
-  endif
-endif
-
-if ( $?tcsh ) then
-	bindkey "^[[3~" delete-char
-endif
-
-bindkey "^R" i-search-back
-set echo_style = both
-set histdup = erase
-set savehist = (1024 merge)
-
-if ($?prompt) then
-  if ($?TERM) then
-    switch($TERM)
-      case xterm*:
-        if ($?tcsh) then
-	  set prompt='%{\033]0;%n@%m:%c\007%}[%n@%m %c]%# '
-        endif
-        breaksw
-      case screen:
-        if ($?tcsh) then
-          set prompt='%{\033k%n@%m:%c\033\\%}[%n@%m %c]%# '
-        endif
-        breaksw
-      default:
-        breaksw
-    endsw
-  endif
-endif
-
-setenv MAIL "/var/spool/mail/$USER"
-
-# Check if we aren't a loginshell and do stuff if we aren't
-if (! $?loginsh) then
-    if ( -d /etc/profile.d ) then
-        set nonomatch
-        foreach i ( /etc/profile.d/*.csh )
-            if ( -r "$i" ) then
-                if ($?prompt) then
-                    source "$i"
-                else
-                    source "$i" >&/dev/null
-                endif
-            endif
-        end
-        unset i nonomatch
-    endif
-endif

csh.login

@@ -1,61 +0,0 @@
-# /etc/csh.login
-
-# System wide environment and startup programs, for login setup
-
-if ( ! ${?PATH} ) then
-        if ( $uid == 0 ) then
-		setenv PATH "/usr/local/sbin:/usr/sbin:/usr/local/bin:/usr/bin"
-        else
-		setenv PATH "/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin"
-        endif
-else
-	#add sbin directories to the path
-	foreach p ( /usr/local/sbin /usr/sbin )
-		switch (":${PATH}:")
-		case "*:${p}:*":
-			breaksw
-		default:
-			if ( $uid == 0 ) then
-	                        set path = ( ${p} ${path:q} )
-			else
-	                        set path = ( ${path:q} ${p} )
-			endif
-			breaksw
-		endsw
-	end
-	unset p
-endif
-
-if ( -ex /usr/bin/hostnamectl ) then
-        setenv HOSTNAME `/usr/bin/hostnamectl --transient`
-        if ( $? != 0 ) then
-                unsetenv HOSTNAME
-        endif
-endif
-if ( ! $?HOSTNAME ) then
-        if ( -ex /usr/bin/hostname ) then
-                setenv HOSTNAME `/usr/bin/hostname`
-                if ( $? != 0 ) then
-                        unsetenv HOSTNAME
-                endif
-        endif
-endif
-if ( ! $?HOSTNAME ) then
-        setenv HOSTNAME `/usr/bin/uname -n`
-endif
-
-set history=1000
-
-if ( -d /etc/profile.d ) then
-        set nonomatch
-        foreach i ( /etc/profile.d/*.csh /etc/profile.d/csh.local )
-                if ( -r "$i" ) then
-	                        if ($?prompt) then
-	                              source "$i"
-	                        else
-	                              source "$i" >& /dev/null
-	                        endif
-                endif
-        end
-        unset i nonomatch
-endif

ethertypes

@@ -1,39 +0,0 @@
-#
-# Ethernet frame types
-#		This file describes some of the various Ethernet
-#		protocol types that are used on Ethernet networks.
-#
-# This list could be found on:
-#         http://www.iana.org/assignments/ethernet-numbers
-#         http://www.iana.org/assignments/ieee-802-numbers
-#
-# <name>    <hexnumber> <alias1>...<alias35> #Comment
-#
-IPv4	 	0800  	ip ip4 		# Internet IP (IPv4)
-X25		0805
-ARP		0806	ether-arp	#
-FR_ARP		0808    		# Frame Relay ARP        [RFC1701]
-BPQ		08FF			# G8BPQ AX.25 Ethernet Packet
-DEC		6000			# DEC Assigned proto
-DNA_DL		6001			# DEC DNA Dump/Load
-DNA_RC		6002			# DEC DNA Remote Console
-DNA_RT		6003			# DEC DNA Routing
-LAT		6004			# DEC LAT
-DIAG		6005			# DEC Diagnostics
-CUST		6006			# DEC Customer use
-SCA		6007			# DEC Systems Comms Arch
-TEB		6558			# Trans Ether Bridging   [RFC1701]
-RAW_FR  	6559			# Raw Frame Relay        [RFC1701]
-RARP		8035			# Reverse ARP            [RFC903]
-AARP		80F3			# Appletalk AARP
-ATALK		809B			# Appletalk
-802_1Q		8100	8021q 1q 802.1q	dot1q # 802.1Q Virtual LAN tagged frame
-IPX		8137			# Novell IPX
-NetBEUI		8191			# NetBEUI
-IPv6		86DD	ip6 		# IP version 6
-PPP		880B			# PPP
-ATMMPOA		884C			# MultiProtocol over ATM
-PPP_DISC	8863			# PPPoE discovery messages
-PPP_SES		8864			# PPPoE session messages
-ATMFATE		8884			# Frame-based ATM Transport over Ethernet
-LOOP		9000	loopback 	# loop proto

filesystems

@@ -1,10 +0,0 @@
-ext4
-ext3
-ext2
-nodev proc
-nodev devpts
-iso9660
-vfat
-hfs
-hfsplus
-*

generate-services.py

@@ -1,50 +0,0 @@
-#!/usr/bin/python3 -Wall
-# -*- coding: utf-8 -*-
-
-# Generate /etc/services from IANA registry
-# Ville Skyttä <ville.skytta@iki.fi> 2016
-
-import re
-from urllib.request import urlopen
-from xml.etree import ElementTree as ET
-
-url = "http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xml"
-ns = {"iana": "http://www.iana.org/assignments"}
-
-with urlopen(url) as stream:
-    tree = ET.parse(stream)
-
-print("# service-name  port/protocol  [aliases ...]   [# comment]")
-
-for record in tree.getroot().findall("iana:record", ns):
-
-    name = record.find("iana:name", ns)
-    if name is None or not re.match(r"[A-Za-z0-9-]+$", name.text):
-        continue
-
-    protocol = record.find("iana:protocol", ns)
-    if protocol is None or not protocol.text:
-        continue
-
-    description = record.find("iana:description", ns).text
-    if description and description.lower() == name.text.lower():
-        description = None
-
-    number = record.find("iana:number", ns)
-    if number is None or not number.text:
-        continue
-    if "-" in number.text:
-        start, end = map(int, number.text.split("-"))
-        number_range = range(start, end + 1)
-    else:
-        number_range = [number.text]
-
-    for number in number_range:
-        numproto = "%s/%s" % (number, protocol.text)
-
-        row = "%-16s" % name.text
-        if description:
-            row += "%-32s# %s" % (numproto, " ".join(description.split()))
-        else:
-            row += numproto
-        print(row)

host.conf

@@ -1 +0,0 @@
-multi on

hosts

@@ -1,7 +0,0 @@
-# Loopback entries; do not change.
-# For historical reasons, localhost precedes localhost.localdomain:
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-# See hosts(5) for proper format and other examples:
-# 192.168.1.10 foo.example.org foo
-# 192.168.1.13 bar.example.org bar

inputrc

@@ -1,42 +0,0 @@
-# do not bell on tab-completion
-#set bell-style none
-
-set meta-flag on
-set input-meta on
-set convert-meta off
-set output-meta on
-
-# Completed names which are symbolic links to
-# directories have a slash appended.
-set mark-symlinked-directories on
-
-$if mode=emacs
-
-# for linux console and RH/Debian xterm
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-# commented out keymappings for pgup/pgdown to reach begin/end of history
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-"\e[3~": delete-char
-"\e[2~": overwrite-mode
-"\e[5C": forward-word
-"\e[5D": backward-word
-"\e[1;5C": forward-word
-"\e[1;5D": backward-word
-
-# for rxvt
-"\e[8~": end-of-line
-"\eOc": forward-word
-"\eOd": backward-word
-
-# for non RH/Debian xterm, can't hurt for RH/DEbian xterm
-"\eOH": beginning-of-line
-"\eOF": end-of-line
-
-# for freebsd console
-"\e[H": beginning-of-line
-"\e[F": end-of-line
-$endif

lang.csh

@@ -1,109 +0,0 @@
-# /etc/profile.d/lang.csh - exports environment variables, and provides fallback
-#                          for CJK languages that can't be displayed in console.
-#                          Resets the locale if unavailable.
-
-unset LANG_backup
-
-# If unavailable, reset to the default. Do this before reading in any
-# explicit user configuration. We simply check if locale emits any
-# warnings, and assume that the settings are invalid if it does.
-set locale_error=`(/usr/bin/locale >/dev/null) |& cat`
-if ("${locale_error}" != "") then
-    if (${?LANG}) then
-        setenv LANG C.UTF-8
-    endif
-    unsetenv LC_ALL
-    setenv LC_CTYPE C.UTF-8
-    setenv LC_NUMERIC C.UTF-8
-    setenv LC_TIME C.UTF-8
-    setenv LC_COLLATE C.UTF-8
-    setenv LC_MONETARY C.UTF-8
-    setenv LC_MESSAGES C.UTF-8
-    setenv LC_PAPER C.UTF-8
-    setenv LC_NAME C.UTF-8
-    setenv LC_ADDRESS C.UTF-8
-    setenv LC_TELEPHONE C.UTF-8
-    setenv LC_MEASUREMENT C.UTF-8
-    setenv LC_IDENTIFICATION C.UTF-8
-else
-    if (${?LANG}) then
-        set LANG_backup=${LANG}
-    endif
-endif
-
-foreach config (/etc/locale.conf "${HOME}/.i18n")
-    if (-f "${config}") then
-        # NOTE: We are using eval & sed here to avoid invoking of any commands & functions from those files.
-        eval `/usr/bin/sed -r -e 's/^[[:blank:]]*([[:upper:]_]+)=([[:print:][:digit:]\._-]+|"[[:print:][:digit:]\._-]+")/setenv \1 \2;/;t;d' ${config}`
-    endif
-end
-
-if (${?LANG_backup}) then
-    setenv LANG "${LANG_backup}"
-endif
-
-unset LANG_backup config locale_error
-
-# ----------------------------------------------
-
-# The LC_ALL is not supposed to be set in /etc/locale.conf according to 'man 5 locale.conf'.
-# If it is set, then we expect it is user's explicit override (most likely from ~/.i18n file).
-# See 'man 7 locale' for more info about LC_ALL.
-if (${?LC_ALL}) then
-    if (${?LANG}) then
-        if (${LC_ALL} != ${LANG}) then
-            setenv LC_ALL
-        else
-            unsetenv LC_ALL
-        endif
-    else
-        unsetenv LC_ALL
-    endif
-endif
-
-# The ${LANG} manipulation is necessary only in virtual terminal (a.k.a. console - /dev/tty*):
-set in_console=`/usr/bin/tty | /usr/bin/grep -vc -e '/dev/tty'`
-
-if (${?LANG} && ${?TERM}) then
-    if (${TERM} == 'linux' && $in_console == 0) then
-        set utf8_used=`echo ${LANG} | /usr/bin/grep -vc -E -i -e '^.+\.utf-?8$'`
-
-        if (${utf8_used} == 0) then
-            switch (${LANG})
-                case en_IN*:
-                    breaksw
-                case ja*:
-                case ko*:
-                case si*:
-                case zh*:
-                case ar*:
-                case fa*:
-                case he*:
-                case *_IN*:
-                    setenv LANG en_US.UTF-8
-                    breaksw
-            endsw
-        else
-            switch (${LANG})
-                case en_IN*:
-                    breaksw
-                case ja*:
-                case ko*:
-                case si*:
-                case zh*:
-                case ar*:
-                case fa*:
-                case he*:
-                case *_IN*:
-                    setenv LANG en_US
-                    breaksw
-            endsw
-        endif
-
-        # NOTE: We are not exporting the ${LANG} here again on purpose.
-        #       If user starts GUI session from console manually, then
-        #       the previously set LANG should be okay to use.
-    endif
-endif
-
-unset in_console utf8_used

lang.sh

@@ -1,91 +0,0 @@
-# /etc/profile.d/lang.sh - exports environment variables, and provides fallback
-#                          for CJK languages that can't be displayed in console.
-#                          Resets the locale if unavailable.
-
-unset LANG_backup
-
-# If unavailable, reset to the default. Do this before reading in any
-# explicit user configuration. We simply check if locale emits any
-# warnings, and assume that the settings are invalid if it does.
-if [ -n "$(/usr/bin/locale 2>&1 1>/dev/null)" ]; then
-    [ -z "$LANG" ] || LANG=C.UTF-8
-    unset LC_ALL
-    LC_CTYPE="C.UTF-8"
-    LC_NUMERIC="C.UTF-8"
-    LC_TIME="C.UTF-8"
-    LC_COLLATE="C.UTF-8"
-    LC_MONETARY="C.UTF-8"
-    LC_MESSAGES="C.UTF-8"
-    LC_PAPER="C.UTF-8"
-    LC_NAME="C.UTF-8"
-    LC_ADDRESS="C.UTF-8"
-    LC_TELEPHONE="C.UTF-8"
-    LC_MEASUREMENT="C.UTF-8"
-    LC_IDENTIFICATION="C.UTF-8"
-else
-    LANG_backup="${LANG}"
-fi
-
-for config in /etc/locale.conf "${HOME}/.i18n"; do
-    if [ -f "${config}" ]; then
-        # NOTE: We are using eval & sed here to avoid invoking of any commands & functions from those files.
-        if [ -x /usr/bin/sed ]; then
-            eval $(/usr/bin/sed -r -e 's/^[[:blank:]]*([[:upper:]_]+)=([[:print:][:digit:]\._-]+|"[[:print:][:digit:]\._-]+")/export \1=\2/;t;d' ${config})
-        else
-            #but if we don't have sed, let's go old way and source it
-            [ -f "${config}" ] && . "${config}"
-        fi
-    fi
-done
-
-if [ -n "${LANG_backup}" ]; then
-    LANG="${LANG_backup}"
-fi
-
-unset LANG_backup config
-
-# ----------------------------------------------
-
-# The LC_ALL is not supposed to be set in /etc/locale.conf according to 'man 5 locale.conf'.
-# If it is set, then we we expect it is user's explicit override (most likely from ~/.i18n file).
-# See 'man 7 locale' for more info about LC_ALL.
-if [ -n "${LC_ALL}" ]; then
-    if [ "${LC_ALL}" != "${LANG}" -a -n "${LANG}" ]; then
-        export LC_ALL
-    else
-        unset LC_ALL
-    fi
-fi
-
-# The ${LANG} manipulation is necessary only in virtual terminal (a.k.a. console - /dev/tty*):
-if [ -n "${LANG}" ] && [ "${TERM}" = 'linux' ] && /usr/bin/tty | /usr/bin/grep --quiet -e '/dev/tty'; then
-    if /usr/bin/grep --quiet -E -i -e '^.+\.utf-?8$' <<< "${LANG}"; then
-        case ${LANG} in
-            ja*)    LANG=en_US.UTF-8 ;;
-            ko*)    LANG=en_US.UTF-8 ;;
-            si*)    LANG=en_US.UTF-8 ;;
-            zh*)    LANG=en_US.UTF-8 ;;
-            ar*)    LANG=en_US.UTF-8 ;;
-            fa*)    LANG=en_US.UTF-8 ;;
-            he*)    LANG=en_US.UTF-8 ;;
-            en_IN*) true             ;;
-            *_IN*)  LANG=en_US.UTF-8 ;;
-        esac
-    else
-        case ${LANG} in
-            ja*)    LANG=en_US ;;
-            ko*)    LANG=en_US ;;
-            si*)    LANG=en_US ;;
-            zh*)    LANG=en_US ;;
-            ar*)    LANG=en_US ;;
-            fa*)    LANG=en_US ;;
-            he*)    LANG=en_US ;;
-            en_IN*) true       ;;
-            *_IN*)  LANG=en_US ;;
-        esac
-    fi
-
-    # NOTE: We are not exporting the ${LANG} here again on purpose.
-    #       If user starts GUI session from console manually, then
-    #       the previously set LANG should be okay to use.
-fi

networks

@@ -1,3 +0,0 @@
-default 0.0.0.0
-loopback 127.0.0.0
-link-local 169.254.0.0

printcap

@@ -1,7 +0,0 @@
-# /etc/printcap
-#
-# Please don't edit this file directly unless you know what you are doing!
-# This file will be automatically generated by cupsd(8) from the
-# /etc/cups/printers.conf file.  All changes to this file
-# will be lost.
-

profile

@@ -1,87 +0,0 @@
-# /etc/profile
-
-# System wide environment and startup programs, for login setup
-# Functions and aliases go in /etc/bashrc
-
-# It's NOT a good idea to change this file unless you know what you
-# are doing. It's much better to create a custom.sh shell script in
-# /etc/profile.d/ to make custom changes to your environment, as this
-# will prevent the need for merging in future updates.
-
-pathmunge () {
-    # If the path is a compat symlink, do nothing.
-    [ -h "$1" ] && return
-
-    case ":${PATH}:" in
-        *:"$1":*)
-            ;;
-        *)
-            if [ "$2" = "after" ] ; then
-                PATH=$PATH:$1
-            else
-                PATH=$1:$PATH
-            fi
-    esac
-}
-
-
-if [ -x /usr/bin/id ]; then
-    if [ -z "$EUID" ]; then
-        # ksh workaround
-        EUID=`/usr/bin/id -u`
-        UID=`/usr/bin/id -ru`
-    fi
-    USER="`/usr/bin/id -un`"
-    LOGNAME=$USER
-    MAIL="/var/spool/mail/$USER"
-fi
-
-# Path manipulation
-if [ "$EUID" = "0" ]; then
-    pathmunge /usr/sbin
-    pathmunge /usr/local/sbin
-else
-    pathmunge /usr/local/sbin after
-    pathmunge /usr/sbin after
-fi
-
-HOSTNAME=$(/usr/bin/hostnamectl --transient 2>/dev/null) || \
-HOSTNAME=$(/usr/bin/hostname 2>/dev/null) || \
-HOSTNAME=$(/usr/bin/uname -n)
-
-if [ -z "$HISTSIZE" ] ; then
-    HISTSIZE=1000
-fi
-
-if [ "$HISTCONTROL" = "ignorespace" ] ; then
-    export HISTCONTROL=ignoreboth
-else
-    export HISTCONTROL=ignoredups
-fi
-
-export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE HISTCONTROL
-
-for i in /etc/profile.d/*.sh /etc/profile.d/sh.local ; do
-    if [ -r "$i" ]; then
-        if [ "${-#*i}" != "$-" ]; then
-            . "$i"
-        else
-            . "$i" >/dev/null
-        fi
-    fi
-done
-
-unset i
-unset -f pathmunge
-
-# Source global bash config, when interactive but not posix or sh mode
-if test "$BASH" &&\
-   test -z "$POSIXLY_CORRECT" &&\
-   test "${0#-}" != sh &&\
-   test -r /etc/bashrc
-then
-   # Bash login shells run only /etc/profile
-   # Bash non-login shells run only /etc/bashrc
-   # Check for double sourcing is done in /etc/bashrc.
-   . /etc/bashrc
-fi

protocols

@@ -1,170 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.13 2025/05/14 15:30 mosvald Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-# Last IANA update included dated 2025-01-08
-#
-# See also http://www.iana.org/assignments/protocol-numbers
-
-ip	0	IP		# internet protocol, pseudo protocol number
-hopopt	0	HOPOPT		# hop-by-hop options for ipv6
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# internet group management protocol
-ggp	3	GGP		# gateway-gateway protocol
-ipv4	4	IPv4		# IPv4 encapsulation
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
-egp	8	EGP		# exterior gateway protocol
-igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
-bbn-rcc	10	BBN-RCC-MON		# BBN RCC Monitoring
-nvp	11	NVP-II		# Network Voice Protocol
-pup	12	PUP		# PARC universal packet protocol
-argus	13	ARGUS		# ARGUS (deprecated)
-emcon	14	EMCON		# EMCON
-xnet	15	XNET		# Cross Net Debugger
-chaos	16	CHAOS		# Chaos
-udp	17	UDP		# user datagram protocol
-mux	18	MUX		# Multiplexing protocol
-dcn	19	DCN-MEAS		# DCN Measurement Subsystems
-hmp	20	HMP		# host monitoring protocol
-prm	21	PRM		# packet radio measurement protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-trunk-1	23	TRUNK-1		# Trunk-1
-trunk-2	24	TRUNK-2		# Trunk-2
-leaf-1	25	LEAF-1		# Leaf-1
-leaf-2	26	LEAF-2		# Leaf-2
-rdp	27	RDP		# "reliable datagram" protocol
-irtp	28	IRTP		# Internet Reliable Transaction Protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
-netblt	30	NETBLT		# Bulk Data Transfer Protocol
-mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
-merit-inp	32	MERIT-INP		# MERIT Internodal Protocol
-dccp	33	DCCP		# Datagram Congestion Control Protocol
-3pc	34	3PC		# Third Party Connect Protocol
-idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	38	IDPR-CMTP		# IDPR Control Message Transport Proto
-tp++	39	TP++		# TP++ Transport Protocol
-il	40	IL		# IL Transport Protocol
-ipv6	41	IPv6		# IPv6 encapsulation
-sdrp	42	SDRP		# Source Demand Routing Protocol
-ipv6-route	43	IPv6-Route		# Routing Header for IPv6
-ipv6-frag	44	IPv6-Frag		# Fragment Header for IPv6
-idrp	45	IDRP		# Inter-Domain Routing Protocol
-rsvp	46	RSVP		# Resource ReSerVation Protocol
-gre	47	GRE		# Generic Routing Encapsulation
-dsr	48	DSR		# Dynamic Source Routing Protocol
-bna	49	BNA		# BNA
-esp	50	ESP		# Encap Security Payload
-ipv6-crypt	50	IPv6-Crypt		# Encryption Header for IPv6 (not in official list)
-ah	51	AH		# Authentication Header
-ipv6-auth	51	IPv6-Auth		# Authentication Header for IPv6 (not in official list)
-i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
-swipe	53	SWIPE		# IP with Encryption (deprecated)
-narp	54	NARP		# NBMA Address Resolution Protocol
-mobile	55	MOBILE		# IP Mobility
-tlsp	56	TLSP		# Transport Layer Security Protocol
-skip	57	SKIP		# SKIP
-ipv6-icmp	58	IPv6-ICMP		# ICMP for IPv6
-ipv6-nonxt	59	IPv6-NoNxt		# No Next Header for IPv6
-ipv6-opts	60	IPv6-Opts		# Destination Options for IPv6
-#	61			# any host internal protocol
-cftp	62	CFTP		# CFTP
-#	63			# any local network
-sat-expak	64	SAT-EXPAK		# SATNET and Backroom EXPAK
-kryptolan	65	KRYPTOLAN		# Kryptolan
-rvd	66	RVD		# MIT Remote Virtual Disk Protocol
-ippc	67	IPPC		# Internet Pluribus Packet Core
-#	68			# any distributed file system
-sat-mon	69	SAT-MON		# SATNET Monitoring
-visa	70	VISA		# VISA Protocol
-ipcv	71	IPCV		# Internet Packet Core Utility
-cpnx	72	CPNX		# Computer Protocol Network Executive
-cphb	73	CPHB		# Computer Protocol Heart Beat
-wsn	74	WSN		# Wang Span Network
-pvp	75	PVP		# Packet Video Protocol
-br-sat-mon	76	BR-SAT-MON		# Backroom SATNET Monitoring
-sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
-wb-mon	78	WB-MON		# WIDEBAND Monitoring
-wb-expak	79	WB-EXPAK		# WIDEBAND EXPAK
-iso-ip	80	ISO-IP		# ISO Internet Protocol
-vmtp	81	VMTP		# Versatile Message Transport
-secure-vmtp	82	SECURE-VMTP		# SECURE-VMTP
-vines	83	VINES		# VINES
-ttp	84	TTP		# TTP
-nsfnet-igp	85	NSFNET-IGP		# NSFNET-IGP
-dgp	86	DGP		# Dissimilar Gateway Protocol
-tcf	87	TCF		# TCF
-eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-sprite-rpc	90	Sprite-RPC		# Sprite RPC Protocol
-larp	91	LARP		# Locus Address Resolution Protocol
-mtp	92	MTP		# Multicast Transport Protocol
-ax.25	93	AX.25		# AX.25 Frames
-ipip	94	IPIP		# Yet Another IP encapsulation
-micp	95	MICP		# Mobile Internetworking Control Pro. (deprecated)
-scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
-etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation
-#	99			# any private encryption scheme
-gmtp	100	GMTP		# GMTP
-ifmp	101	IFMP		# Ipsilon Flow Management Protocol
-pnni	102	PNNI		# PNNI over IP
-pim	103	PIM		# Protocol Independent Multicast
-aris	104	ARIS		# ARIS
-scps	105	SCPS		# SCPS
-qnx	106	QNX		# QNX
-a/n	107	A/N		# Active Networks
-ipcomp	108	IPComp		# IP Payload Compression Protocol
-snp	109	SNP		# Sitara Networks Protocol
-compaq-peer	110	Compaq-Peer		# Compaq Peer Protocol
-ipx-in-ip	111	IPX-in-IP		# IPX in IP
-vrrp	112	VRRP		# Virtual Router Redundancy Protocol
-pgm	113	PGM		# PGM Reliable Transport Protocol
-#	114			# any 0-hop protocol
-l2tp	115	L2TP		# Layer Two Tunneling Protocol
-ddx	116	DDX		# D-II Data Exchange
-iatp	117	IATP		# Interactive Agent Transfer Protocol
-stp	118	STP		# Schedule Transfer
-srp	119	SRP		# SpectraLink Radio Protocol
-uti	120	UTI		# UTI
-smp	121	SMP		# Simple Message Protocol
-sm	122	SM		# SM (deprecated)
-ptp	123	PTP		# Performance Transparency Protocol
-isis	124	ISIS		# ISIS over IPv4
-fire	125	FIRE
-crtp	126	CRTP		# Combat Radio Transport Protocol
-crudp	127	CRUDP		# Combat Radio User Datagram
-sscopmce	128	SSCOPMCE
-iplt	129	IPLT
-sps	130	SPS		# Secure Packet Shield
-pipe	131	PIPE		# Private IP Encapsulation within IP
-sctp	132	SCTP		# Stream Control Transmission Protocol
-fc	133	FC		# Fibre Channel
-rsvp-e2e-ignore	134	RSVP-E2E-IGNORE
-mobility-header	135	Mobility-Header		# Mobility Header
-udplite	136	UDPLite
-mpls-in-ip	137	MPLS-in-IP
-manet	138	manet		# MANET Protocols
-hip	139	HIP		# Host Identity Protocol
-shim6	140	Shim6		# Shim6 Protocol
-wesp	141	WESP		# Wrapped Encapsulating Security Payload
-rohc	142	ROHC		# Robust Header Compression
-ethernet	143	Ethernet		# Ethernet encapsulation for SRv6
-aggfrag	144	AGGFRAG		# AGGFRAG encapsulation payload for ESP
-nsh	145	NSH		# Network Service Header
-homa	146	Homa		# Homa
-bit-emu	147	BIT-EMU		# Bit-stream Emulation
-#   148-252 Unassigned                                       [IANA]
-#   253     Use for experimentation and testing           [RFC3692]
-#   254     Use for experimentation and testing           [RFC3692]
-#   255                 Reserved                             [IANA]
-# The following entries have not been assigned by IANA but are used
-# internally by the Linux kernel.
-mptcp	262	MPTCP		# Multipath TCP connection

serviceslint

@@ -1,119 +0,0 @@
-#!/usr/bin/perl
-#
-# Perform sanity checks on the services file, supplied as argument.
-# Based on an earlier shell script of the same name, but much faster,
-# and it also detects actual errors in the current services file :)
-#
-# This program includes a manual, run "perldoc serviceslint" to see it.
-#
-
-use strict;
-use warnings;
-
-die "Usage: $0 /etc/services\n" unless $#ARGV == 0;
-
-# Build a hash of known protocols
-my %protocol;
-open FH, "protocols" or die "cannot open protocols: $!\n";
-while (<FH>) {
-	chomp;
-	s/#.*$//;
-	my ($name, $port) = m/([\S]+)\s+(\d+)/ or next;
-	$protocol{$name} = $port;
-}
-close FH;
-
-# Parse the supplied services file
-my $retval = 0;
-my $line = 0;
-my %service;
-open FH, $ARGV[0] or die "cannot open $ARGV[0]: $!\n";
-while (<FH>) {
-	$line++;				    # Keep a line count
-	chomp;					    # Remove CR/LF chars
-	if (m/^\s+/) {
-		print "Malformed line $line\n";     # No leading whitespace
-		$retval = 1;
-		next;
-	}
-	s/\s*#.*$//;                                # Strip out comments
-	next if m/^$/;				    # Skip empty lines
-	my ($name, $port, $proto, $aliases) =	    # Primary pattern match
-		m/^([\S]+)\s+(\d+)\/(\w+)\s*(.*)/
-		or die "Malformed line: $line\n";
-	if (not exists $protocol{$proto}) {
-		print "Bad protocol at line $line: $proto\n";
-		$retval = 1;
-	}
-	if (exists $service{$proto}{$port}) {
-		print "Duplicate port at line $line: $port/$proto\n";
-		$retval = 1;
-	}
-	$service{$proto}{$port} = $name;
-	foreach ($name, split /\s+/, $aliases) {
-		if (exists $service{$proto}{$_}) {
-			print "Duplicate name at line $line: $_/$proto\n";
-			$retval = 1;
-		}
-		$service{$proto}{$_} = $port;
-	};
-
-}
-close FH;
-exit $retval;
-
-__END__
-
-=head1 NAME
-
-serviceslint - perform verification on the /etc/services file
-
-=head1 SYNOPSIS
-
-B<serviceslint> I<filename>
-
-=head1 DESCRIPTION
-
-The B<serviceslint> command performs syntax and content checks on the
-given filename, normally a copy of the I</etc/services> file.
-
-Syntax checking consists of a regular expression applied to
-non-empty, non-comment lines.  If the syntax check fails, then
-the program prints a message and aborts with non-zero status code.
-
-Content checking detects various kinds of duplicate entries.
-Currently, warnings are printed for duplicate entries, but execution
-continues, and the program I<exits with status code zero> (eg. success).
-
-=over
-
-=item B<Malformed line> I<NNN>
-
-The specified line has invalid syntax.  Note that leading whitespace
-is not permitted.  Non-empty lines must begin with a comment, or with
-a service name followed by a port number / protocol pair.
-
-=item B<Duplicate port at line> I<NNN>
-
-Occurs when a port number / protocol pair is found more than once
-in the services file.  The warning is flagged on the second (and any
-subsequent) occurrences.  These entries will not be found via the
-B<getservbyport()> function.
-
-=item B<Duplicate name at line> I<NNN>
-
-Occurs when a service name, or alias, occurs more than once in the
-services file.  The warning is flagged on the second (and subsequent)
-occurrence.  These entries will not be returned by the B<getservbyname()>
-function.
-
-=back
-
-=head1 SEE ALSO
-
-The services(5) man page describes the file format.
-
-=head1 AUTHOR
-
-Ralph Siemsen & Phil Knirsch
-

setup.sysusers.conf

@@ -1,41 +0,0 @@
-u root         0:0     "Super User"            /root            /bin/bash
-u bin          1       "bin"                   /bin             -
-u daemon       2       "daemon"                /sbin            -
-u adm          3:4     "adm"                   /var/adm         -
-u lp           4:7     "lp"                    /var/spool/lpd   -
-u sync         5:0     "sync"                  /sbin            /bin/sync
-u shutdown     6:0     "shutdown"              /sbin            /sbin/shutdown
-u halt         7:0     "halt"                  /sbin            /sbin/halt
-u mail         8:12    "mail"                  /var/spool/mail  -
-u operator    11:0     "operator"              /root            -
-u games       12:100   "games"                 /usr/games       -
-u ftp         14:50    "FTP User"              /var/ftp         -
-u nobody   65534:65534 "Kernel Overflow User"  -                -
-g root           0
-g sys            3
-g adm            4
-g tty            5
-g disk           6
-g lp             7
-g mem            8
-g kmem           9
-g wheel          10
-g cdrom          11
-g mail           12
-g man            15
-g dialout        18
-g floppy         19
-g games          20
-g utmp           22
-g tape           33
-g kvm            36
-g video          39
-g ftp            50
-g lock           54
-g audio          63
-g users          100
-g clock          103
-g input          104
-g render         105
-g sgx            106
-g nobody         65534

shells

@@ -1,4 +0,0 @@
-/bin/sh
-/bin/bash
-/usr/bin/sh
-/usr/bin/bash

sources

@@ -0,0 +1 @@
+SHA512 (setup-2.13.6.tar.bz2) = f330827f2f8f379e63034e009eb988c843d0d7135732e0777b5705d45a0fab2068129c603b24defb2ba0ff7bfc5a1dea0e9a4b30427ad77e880b9df221f3a2c0

uidgid

@@ -1,208 +0,0 @@
-#NAME	UID	GID	HOME		SHELL	PACKAGES
-root	0	0	/root		/bin/bash	setup
-bin	1	1	/bin		/usr/sbin/nologin	setup
-daemon	2	2	/sbin		/usr/sbin/nologin	setup
-sys	-	3	-		-	setup
-adm	3	4	/var/adm		/bin/bash	setup
-tty	-	5	-		-	setup
-disk	-	6	-		-	setup
-lp	4	7	/var/spool/lpd		/usr/sbin/nologin	setup
-mem	-	8	-		-	setup
-kmem	-	9	-		-	setup
-wheel	-	10	-		-	setup
-cdrom	-	11	-		-	setup
-sync	5	(0)	/sbin		/bin/sync	setup
-shutdown	6	(0)	/sbin		/sbin/shutdown	setup
-halt	7	(0)	/sbin		/sbin/halt	setup
-mail	8	12	/var/spool/mail		/usr/sbin/nologin	setup
-news	9	13	/var/spool/news		/usr/sbin/nologin	inn
-uucp	10	14	/var/spool/uucp		/usr/sbin/nologin	uucp
-operator	11	(0)	/root		/usr/sbin/nologin	setup
-games	12	(100)	/usr/games		/usr/sbin/nologin	setup
-# Removed in 2013 (#918206, #1667231), can be reused if necessary later
-# gopher	13	30	/var/gopher		/usr/sbin/nologin	-
-ftp	14	50	/var/ftp		/usr/sbin/nologin	setup
-man	-	15	-		-	setup
-# Retired in 2018 (https://src.fedoraproject.org/rpms/oprofile/c/80fe828c879b1f67a109998cdd42a1bd8513bc3c)
-# oprofile	16	16	/var/lib/oprofile		/usr/sbin/nologin	oprofile
-# Retired sometime between 2011 and 2014 (https://src.fedoraproject.org/rpms/pki-ca/c/4ca1ce11a6e090099b36493653808cfe380911e1)
-# pkiuser	17	17	/usr/share/pki		/usr/sbin/nologin	pki-ca,rhpki-ca
-dialout	-	18	-		-	setup
-floppy	-	19	-		-	setup
-games	-	20	-		-	setup
-# mlocate retired in 2024 (https://src.fedoraproject.org/rpms/mlocate/c/7277dd5f59db126d1046a6aa5c4077a597dddddc)
-# slocate	-	21	-		-	slocate
-utmp	-	22	-		-	initscripts,libutempter
-squid	23	23	/var/spool/squid		/dev/null	squid
-# Retired in 2015 (https://src.fedoraproject.org/rpms/pvm/c/eb6972917befbed00aff622c2c428d18439efe27)
-# pvm	24	24	/usr/share/pvm3		/bin/bash	pvm
-named	25	25	/var/named		/bin/false	bind
-postgres	26	26	/var/lib/pgsql		/bin/bash	postgresql-server
-mysql	27	27	/var/lib/mysql		/usr/sbin/nologin	mysql
-nscd	28	28	/		/bin/false	nscd
-rpcuser	29	29	/var/lib/nfs		/bin/false	nfs-utils
-# Present in https://pagure.io/setup/c/08258e0f748c4f372fcbf1dd7947c132ee0b8a12, probably already unused in 2008
-# console	-	31	-		-	dev
-rpc	32	32	/var/lib/rpcbind		/usr/sbin/nologin	portmap
-amandabackup	33	(6)	/var/lib/amanda		/bin/false	amanda
-tape	-	33	-		-	setup
-# Retired in 2021 (https://src.fedoraproject.org/rpms/netdump-server/c/9bbe604e20c113eaa7c897b9b12a705a36afb109)
-# netdump	34	34	/var/crash		/bin/bash	netdump-client, netdump-server
-utempter	-	35	-		-	libutempter
-kvm	-	36	-		-	kvm, vdsm, libvirt
-vdsm	36	(36)	/		/bin/bash	kvm, vdsm
-rpm	37	37	/var/lib/rpm		/bin/bash	rpm
-ntp	38	38	/etc/ntp		/usr/sbin/nologin	ntp
-video	-	39	-		-	setup
-dip	-	40	-		-	ppp
-mailman	41	41	/usr/lib/mailman		/usr/sbin/nologin	mailman
-gdm	42	42	/var/lib/gdm		/usr/sbin/nologin	gdm
-# Retired in 2022 (https://src.fedoraproject.org/rpms/xorg-x11-xfs/c/3e273d8a939cf5f08bd4eea4f594fedd508dabcf)
-# xfs	43	43	/etc/X11/fs		/bin/false	XFree86-xfs
-pppusers	-	44	-		-	linuxconf
-popusers	-	45	-		-	linuxconf
-slipusers	-	46	-		-	linuxconf
-mailnull	47	47	/var/spool/mqueue		/dev/null	sendmail
-apache	48	48	/usr/share/httpd		/bin/false	httpd
-# Retired sometime before 2008 (https://src.fedoraproject.org/rpms/FreeWnn/c/8f9ac4e26531c704a26057be48261fb3d1ebea8e)
-# wnn	49	49	/var/lib/wnn		/usr/sbin/nologin	FreeWnn
-smmsp	51	51	/var/spool/mqueue		/dev/null	sendmail
-puppet	52	52	/var/lib/puppet		/usr/sbin/nologin	puppet
-tomcat	53	53	/var/lib/tomcat		/usr/sbin/nologin	tomcat
-lock	-	54	-		-	setup
-ldap	55	55	/var/lib/ldap		/bin/false	openldap-servers
-# Last references on the web appear around 2007…
-# frontpage	56	56	/var/www		/bin/false	mod_frontpage
-nut	57	57	/var/lib/ups		/bin/false	nut
-# Retired in 2011 (https://src.fedoraproject.org/rpms/beagle/c/5721c9577eebdc7a0f6566f3efd955b3f4427a0e)
-# beagleindex	58	58	/var/cache/beagle		/bin/false	beagle
-tss	59	59	-		/usr/sbin/nologin	trousers
-# Retired in 2012 (https://src.fedoraproject.org/rpms/piranha/c/15262075b63d48e2ee236ffb87d2db0a4aef1c42)
-# piranha	60	60	/etc/sysconfig/ha		/dev/null	piranha
-# Retired in 2025 (https://src.fedoraproject.org/rpms/prelude-manager/c/68cce28aa0e1788d857791155812e1f20d35036e)
-# prelude-manager	61	61	-		/usr/sbin/nologin	prelude-manager
-# Retired in 2011 (https://src.fedoraproject.org/rpms/snort/c/e2e149974cb3b56b70ed158339a3cb931497dfa2)
-# snortd	62	62	-		/usr/sbin/nologin	snortd
-audio	-	63	-		-	setup
-condor	64	64	/var/lib/condor		/usr/sbin/nologin	condord
-nslcd	65	(55)	/		/usr/sbin/nologin	nslcd
-wine	-	66	-		-	wine
-pegasus	66	65	/var/lib/Pegasus		/usr/sbin/nologin	tog-pegasus
-webalizer	67	67	/var/www/usage		/usr/sbin/nologin	webalizer
-# Retired in 2011 (https://src.fedoraproject.org/rpms/hal/c/e6690cd150b5e1c13e7779de1ce32ded0bc22bc1)
-# haldaemon	68	68	/		/usr/sbin/nologin	hal
-# Present in https://pagure.io/setup/c/08258e0f748c4f372fcbf1dd7947c132ee0b8a12, probably already unused in 2008
-# vcsa	69	69	-		/usr/sbin/nologin	dev,MAKEDEV
-avahi	70	70	/var/run/avahi-daemon		/usr/sbin/nologin	avahi
-# Present in https://pagure.io/setup/c/08258e0f748c4f372fcbf1dd7947c132ee0b8a12, probably already unused in 2008
-# realtime	-	71	-		-	-
-tcpdump	72	72	/		/usr/sbin/nologin	tcpdump
-privoxy	73	73	/etc/privoxy		/bin/bash	privoxy
-sshd	74	74	/var/empty/sshd		/usr/sbin/nologin	openssh-server
-radvd	75	75	/		/bin/false	radvd
-cyrus	76	(12)	/var/imap		/bin/bash	cyrus-imapd
-saslauth	-	76	-		-	cyrus-sasl, cyrus-imap
-# Dynamic on new systems, removed Dec2023, can be reused if necessary later
-#arpwatch       77      77      /var/lib/arpwatch               /usr/sbin/nologin       arpwatch
-fax	78	78	/var/spool/fax		/usr/sbin/nologin	mgetty
-# Retired in 2014 (https://src.fedoraproject.org/rpms/nocpulse-common/c/2ee190601831472ca3ae9857311cfbd31c129c0e)
-# nocpulse	79	79	/etc/sysconfig/nocpulse		/bin/bash	nocpulse
-desktop	80	80	-		/usr/sbin/nologin	desktop-file-utils
-dbus	81	81	/		/usr/sbin/nologin	dbus
-# References to JOnAS in FC3 around 2005…
-# jonas	82	82	/var/lib/jonas		/usr/sbin/nologin	jonas
-clamav	83	83	/tmp		/usr/sbin/nologin	clamav
-screen	-	84	-		-	screen
-# Retired in 2021 (https://src.fedoraproject.org/rpms/quagga/c/42d57331ac98fcc4c7103854cb1ce0ddfc4bbbc2)
-# quaggavt	-	85	-		-	quagga
-# Retired in 2014 (https://src.fedoraproject.org/rpms/sabayon/c/e1c4c886227e8123e55fd3fad93dc966d512b9b9)
-# sabayon	86	86	-		/usr/sbin/nologin	sabayon
-polkituser	87	87	/		/usr/sbin/nologin	PolicyKit
-wbpriv	-	88	-		-	samba-common
-postfix	89	89	/var/spool/postfix		/bin/true	postfix
-postdrop	-	90	-		-	postfix
-# https://en.wikipedia.org/wiki/Majordomo_(software) says final release was 19 January 2000
-# majordomo	91	91	/usr/lib/majordomo		/bin/bash	majordomo
-# Retired in 2021 (https://src.fedoraproject.org/rpms/quagga/c/42d57331ac98fcc4c7103854cb1ce0ddfc4bbbc2)
-# quagga	92	92	/		/usr/sbin/nologin	quagga
-exim	93	93	/var/spool/exim		/usr/sbin/nologin	exim
-distcache	94	94	/		/usr/sbin/nologin	distcache
-radiusd	95	95	/		/bin/false	freeradius
-# Retired in 2021 (https://src.fedoraproject.org/rpms/hsqldb/c/54def1d22548601a91ccf6a92c17645a1c5d7cdf)
-# hsqldb	96	96	/var/lib/hsqldb		/usr/sbin/nologin	hsqldb
-dovecot	97	97	/usr/libexec/dovecot		/usr/sbin/nologin	dovecot
-ident	98	98	/		/usr/sbin/nologin	ident
-# Note: 99 used to be the old uid for nobody, now moved to 65534, do not reuse
-users	-	100	-		-	setup
-ssh_keys	-	101	-		-	openssh
-clock	-	103	-		-	systemd
-input	-	104	-		-	systemd
-render	-	105	-		-	systemd
-sgx	-	106	-		-	systemd
-qemu	107	107	/		/usr/sbin/nologin	libvirt
-ovirt	108	108	/		/usr/sbin/nologin	libvirt
-# Retired in 2019 (https://src.fedoraproject.org/rpms/vdsm/c/6f1df621f648aa3b65edfcf3389649a6d13df5d4)
-# rhevm	109	109	/home/rhevm		/usr/sbin/nologin	vdsm-reg
-jetty	110	110	/usr/share/jetty		/usr/sbin/nologin	jetty
-saned	111	111	/		/usr/sbin/nologin	sane-backends
-vhostmd	112	112	/usr/share/vhostmd		/usr/sbin/nologin	vhostmd
-usbmuxd	113	113	/		/usr/sbin/nologin	usbmuxd
-polkitd	114	114	/		/usr/sbin/nologin	polkit
-bacula	133	133	/var/spool/bacula		/usr/sbin/nologin	bacula
-cimsrvr	134	134	/		/usr/sbin/nologin	tog-pegasus-libs
-mock	-	135	/		-	mock
-# Retired in 2012 (https://src.fedoraproject.org/rpms/ricci/c/02a86812383253577ce309d633a400c9c6353ecd,
-#                  https://fedoraproject.org/wiki/Features/Cluster)
-# ricci	140	140	/var/lib/ricci		/usr/sbin/nologin	ricci
-# luci	141	141	/var/lib/luci		/usr/sbin/nologin	luci
-activemq	142	142	/usr/share/activemq		/usr/sbin/nologin	activemq
-# Retired in 2019 (https://src.fedoraproject.org/rpms/cassandra/c/8fcb780b616a034aa5d787d04d631ac1f815f694)
-# cassandra	143	143	/var/lib/cassandra		/usr/sbin/nologin	cassandra
-stap-server	155	155	/var/lib/stap-server		/usr/sbin/nologin	systemtap
-stapusr	-	156	/		-	systemtap-runtime
-stapsys	-	157	/		-	systemtap-runtime
-stapdev	-	158	/		-	systemtap-runtime
-swift	160	160	/var/lib/swift		/usr/sbin/nologin	openstack-swift
-glance	161	161	/var/lib/glance		/usr/sbin/nologin	openstack-glance
-nova	162	162	/var/lib/nova		/usr/sbin/nologin	openstack-nova
-keystone	163	163	/var/lib/keystone		/usr/sbin/nologin	openstack-keystone
-quantum	164	164	/var/lib/quantum		/usr/sbin/nologin	openstack-quantum
-cinder	165	165	/var/lib/cinder		/usr/sbin/nologin	openstack-cinder
-ceilometer	166	166	/var/lib/ceilometer		/usr/sbin/nologin	openstack-ceilometer
-ceph	167	167	/var/lib/ceph		/usr/sbin/nologin	ceph-common
-avahi-autoipd	170	170	/var/lib/avahi-autoipd		/usr/sbin/nologin	avahi
-pulse	171	171	/var/run/pulse		/usr/sbin/nologin	pulseaudio
-# Dynamic on new systems, removed Mar2025, can be reused if necessary later
-# rtkit	172	172	/proc		/usr/sbin/nologin	rtkit
-abrt	173	173	/etc/abrt		/usr/sbin/nologin	abrt
-retrace	174	174	/usr/share/retrace-server		/usr/sbin/nologin	retrace-server
-ovirtagent	175	175	/		/usr/sbin/nologin	ovirt-guest-agent
-ats	176	176	/		/usr/sbin/nologin	trafficserver
-dhcpd	177	177	/		/usr/sbin/nologin	dhcp
-myproxy	178	178	/var/lib/myproxy		/usr/sbin/nologin	myproxy-server
-sanlock	179	179	/var/run/sanlock		/usr/sbin/nologin	sanlock
-# Retired in 2012 (https://src.fedoraproject.org/rpms/aeolus-all/c/4b303d259fb530130e413be462e032390595714d)
-# aeolus	180	180	/var/aeolus		/usr/sbin/nologin	aeolus-configure
-# Retired in 2015 (https://src.fedoraproject.org/rpms/wallaby/c/93d5de780d22a378db988a8b72d3d30ebf628930)
-# wallaby	181	181	/var/lib/wallaby		/usr/sbin/nologin	wallaby
-# Not used anymore, removed Jun2021, can be reused if necessary later
-#katello	182	182	/usr/share/katello		/usr/sbin/nologin	katello-common
-elasticsearch	183	183	/usr/share/java/elasticsearch		/usr/sbin/nologin	elasticsearch
-mongodb	184	184	/var/lib/mongodb		/usr/sbin/nologin	mongodb
-# Previously provided by the 'jboss-as' package.
-wildfly	185	185	/usr/share/wildfly		/usr/sbin/nologin	wildfly
-jbosson	-	186	-		-	jboss-on-agent
-jbosson-agent	186	(186)	/		/usr/sbin/nologin	jboss-on-agent
-heat	187	187	/var/lib/heat		/usr/sbin/nologin	heat
-haproxy	188	188	/var/lib/haproxy		/usr/sbin/nologin	haproxy
-haclient	-	189	-		-	pacemaker
-hacluster	189	(189)	/		/usr/sbin/nologin	pacemaker
-systemd-journal	-	190	-		-	systemd
-# Dynamic on new systems, removed Dec2014, can be reused if necessary later
-#systemd-journal-gateway	191	191	/		/usr/sbin/nologin	systemd
-systemd-network	192	192	/		/usr/sbin/nologin	systemd
-systemd-resolve	193	193	/		/usr/sbin/nologin	systemd
-xrootd	194	194	/var/spool/xrootd		-	xrootd-server
-#gnats	?	?	?		?	gnats, gnats-db
-#listar	?	?	?		?	listar
-nobody	65534	65534	/		/usr/sbin/nologin	setup

uidgidlint

@@ -1,28 +0,0 @@
-#!/bin/bash
-set -eu
-set -o pipefail
-
-# We need a file to look at.
-if [ -z "$*" ] ; then
-	echo "Usage: $0 uidgid"
-	exit 1
-fi
-error=0
-# The format of the file is (currently)
-for infile in "$@" ; do
-	uidlist=$(grep -v '^#' "$infile" | awk '{print $2}' | grep -v -e - | sort -nu)
-	gidlist=$(grep -v '^#' "$infile" | awk '{print $3}' | grep -v -e - | sort -nu)
-	for uid in $uidlist; do
-		if test "$(grep -v '^#' "$infile" | awk '{print $2}' | grep -c '^'"$uid"'$')" -ne 1 ; then
-			echo "Duplicate UID: $uid"
-			error=1
-		fi
-	done
-	for gid in $gidlist; do
-		if test "$(grep -v '^#' "$infile" | awk '{print $3}' | grep -c '^'"$gid"'$')" -ne 1 ; then
-			echo "Duplicate GID: $gid"
-			error=1
-		fi
-	done
-done
-exit $error