diff --git a/0001-Fix-BeagleAI-detection.patch b/0001-Fix-BeagleAI-detection.patch new file mode 100644 index 0000000..dfd96cc --- /dev/null +++ b/0001-Fix-BeagleAI-detection.patch @@ -0,0 +1,29 @@ +From 1849ef423238aeb1732eb3b8e67eb46bc21401c7 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Thu, 10 Sep 2020 14:24:12 +0100 +Subject: [PATCH] Fix BeagleAI detection + +Signed-off-by: Peter Robinson +--- + board/ti/am57xx/board.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c +index 7809875510..3232812a97 100644 +--- a/board/ti/am57xx/board.c ++++ b/board/ti/am57xx/board.c +@@ -527,8 +527,10 @@ void do_board_detect(void) + + rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, + CONFIG_EEPROM_CHIP_ADDRESS); +- if (rc) ++ if (rc) { + printf("ti_i2c_eeprom_init failed %d\n", rc); ++ ti_i2c_eeprom_am_set("BBONE-AI", "A"); ++ } + + #ifdef CONFIG_SUPPORT_EMMC_BOOT + rc = board_bootmode_has_emmc(); +-- +2.26.2 + diff --git a/0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch b/0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch new file mode 100644 index 0000000..5dd7695 --- /dev/null +++ b/0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch @@ -0,0 +1,53 @@ +From 1c56fc2835e10cdc039a4c1d049c1a6978e036f3 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Thu, 22 Jul 2021 16:22:48 +0100 +Subject: [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi + memory ops" + +This reverts commit 346df7d4fa62afc578d820b3a18815eec765074f. + +This patch broke booting Rockchip systems from U-Boot residing on SPI +flash, for at least the Pinebook Pro and Rockpro64, and also confirmed +with the not yet upstream Helios64. + +Signed-off-by: Peter Robinson +Cc: T Karthik Reddy +Cc: Ashok Reddy Soma +Cc: Michal Simek +Cc: Pratyush Yadav +--- + drivers/spi/spi-uclass.c | 11 ----------- + 1 file changed, 11 deletions(-) + +diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c +index d867b27806..ec7f4652b3 100644 +--- a/drivers/spi/spi-uclass.c ++++ b/drivers/spi/spi-uclass.c +@@ -11,7 +11,6 @@ + #include + #include + #include +-#include + #include + #include + #include +@@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus) + ops->set_mode += gd->reloc_off; + if (ops->cs_info) + ops->cs_info += gd->reloc_off; +- if (ops->mem_ops) { +- struct spi_controller_mem_ops *mem_ops = +- (struct spi_controller_mem_ops *)ops->mem_ops; +- if (mem_ops->adjust_op_size) +- mem_ops->adjust_op_size += gd->reloc_off; +- if (mem_ops->supports_op) +- mem_ops->supports_op += gd->reloc_off; +- if (mem_ops->exec_op) +- mem_ops->exec_op += gd->reloc_off; +- } + reloc_done++; + } + #endif +-- +2.31.1 + diff --git a/0001-enable-hs400-and-sdma-support.patch b/0001-enable-hs400-and-sdma-support.patch new file mode 100644 index 0000000..782366f --- /dev/null +++ b/0001-enable-hs400-and-sdma-support.patch @@ -0,0 +1,158 @@ +From 42aa88db46fa88db52bbb5a96fc0eaebe695110e Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Mon, 30 Aug 2021 18:20:39 +0100 +Subject: [PATCH] enable hs400 and sdma support + +Signed-off-by: Peter Robinson +--- + configs/firefly-rk3399_defconfig | 2 ++ + configs/nanopc-t4-rk3399_defconfig | 2 ++ + configs/nanopi-m4-2gb-rk3399_defconfig | 2 ++ + configs/nanopi-m4-rk3399_defconfig | 2 ++ + configs/nanopi-m4b-rk3399_defconfig | 2 ++ + configs/nanopi-neo4-rk3399_defconfig | 2 ++ + configs/nanopi-r4s-rk3399_defconfig | 2 ++ + configs/pinebook-pro-rk3399_defconfig | 1 + + configs/rock960-rk3399_defconfig | 1 + + configs/rockpro64-rk3399_defconfig | 2 ++ + 10 files changed, 18 insertions(+) + +diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig +index 2ca2ac35e4..84ee690a2d 100644 +--- a/configs/firefly-rk3399_defconfig ++++ b/configs/firefly-rk3399_defconfig +@@ -33,7 +33,9 @@ CONFIG_MISC=y + CONFIG_ROCKCHIP_EFUSE=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_SF_DEFAULT_SPEED=20000000 + CONFIG_DM_ETH=y +diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig +index a94f428def..722377803e 100644 +--- a/configs/nanopc-t4-rk3399_defconfig ++++ b/configs/nanopc-t4-rk3399_defconfig +@@ -30,7 +30,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig +index c9833fdb85..384d7da80c 100644 +--- a/configs/nanopi-m4-2gb-rk3399_defconfig ++++ b/configs/nanopi-m4-2gb-rk3399_defconfig +@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig +index 2b2fcac366..b6b8ca8d3a 100644 +--- a/configs/nanopi-m4-rk3399_defconfig ++++ b/configs/nanopi-m4-rk3399_defconfig +@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig +index 6d3afe1b63..3f83877e0a 100644 +--- a/configs/nanopi-m4b-rk3399_defconfig ++++ b/configs/nanopi-m4b-rk3399_defconfig +@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig +index 1bf5d1d095..6412cb2d7e 100644 +--- a/configs/nanopi-neo4-rk3399_defconfig ++++ b/configs/nanopi-neo4-rk3399_defconfig +@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig +index 351d2eb553..7b527d47fa 100644 +--- a/configs/nanopi-r4s-rk3399_defconfig ++++ b/configs/nanopi-r4s-rk3399_defconfig +@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_DM_ETH=y + CONFIG_ETH_DESIGNWARE=y +diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig +index f97d5e872b..b0e68c9591 100644 +--- a/configs/pinebook-pro-rk3399_defconfig ++++ b/configs/pinebook-pro-rk3399_defconfig +@@ -46,6 +46,7 @@ CONFIG_MISC=y + CONFIG_ROCKCHIP_EFUSE=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y + CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y +diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig +index 0233e0ea52..624d718f9f 100644 +--- a/configs/rock960-rk3399_defconfig ++++ b/configs/rock960-rk3399_defconfig +@@ -36,6 +36,7 @@ CONFIG_ROCKCHIP_GPIO=y + CONFIG_SYS_I2C_ROCKCHIP=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y + CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y +diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig +index ae11a8f5eb..b4e7e9700a 100644 +--- a/configs/rockpro64-rk3399_defconfig ++++ b/configs/rockpro64-rk3399_defconfig +@@ -39,7 +39,9 @@ CONFIG_MISC=y + CONFIG_ROCKCHIP_EFUSE=y + CONFIG_MMC_DW=y + CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_HS400_SUPPORT=y + CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y + CONFIG_MMC_SDHCI_ROCKCHIP=y + CONFIG_SF_DEFAULT_BUS=1 + CONFIG_SPI_FLASH_GIGADEVICE=y +-- +2.31.1 + diff --git a/ARM-bcm283x-change-the-virtual-address-of-the-XHCI-PCI-device-base.patch b/ARM-bcm283x-change-the-virtual-address-of-the-XHCI-PCI-device-base.patch new file mode 100644 index 0000000..f4d7d54 --- /dev/null +++ b/ARM-bcm283x-change-the-virtual-address-of-the-XHCI-PCI-device-base.patch @@ -0,0 +1,203 @@ +From patchwork Thu Jun 17 09:22:03 2021 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Marek Szyprowski +X-Patchwork-Id: 1493284 +X-Patchwork-Delegate: matthias.bgg@gmail.com +Return-Path: +X-Original-To: incoming@patchwork.ozlabs.org +Delivered-To: patchwork-incoming@bilbo.ozlabs.org +Authentication-Results: ozlabs.org; + spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de + (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; + envelope-from=u-boot-bounces@lists.denx.de; receiver=) +Authentication-Results: ozlabs.org; + dkim=pass (1024-bit key; + unprotected) header.d=samsung.com header.i=@samsung.com header.a=rsa-sha256 + header.s=mail20170921 header.b=S423zQBA; + dkim-atps=neutral +Received: from phobos.denx.de (phobos.denx.de + [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) + (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) + key-exchange X25519 server-signature RSA-PSS (4096 bits)) + (No client certificate requested) + by ozlabs.org (Postfix) with ESMTPS id 4G5GmF2YYPz9s1l + for ; Thu, 17 Jun 2021 19:22:21 +1000 (AEST) +Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) + by phobos.denx.de (Postfix) with ESMTP id 380E981E1C; + Thu, 17 Jun 2021 11:22:15 +0200 (CEST) +Authentication-Results: phobos.denx.de; + dmarc=pass (p=none dis=none) header.from=samsung.com +Authentication-Results: phobos.denx.de; + spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de +Authentication-Results: phobos.denx.de; + dkim=pass (1024-bit key; + unprotected) header.d=samsung.com header.i=@samsung.com header.b="S423zQBA"; + dkim-atps=neutral +Received: by phobos.denx.de (Postfix, from userid 109) + id 066B882024; Thu, 17 Jun 2021 11:22:14 +0200 (CEST) +X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de +X-Spam-Level: +X-Spam-Status: No, score=-2.2 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, + DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,RCVD_IN_MSPIKE_H3, + RCVD_IN_MSPIKE_WL,SPF_HELO_PASS autolearn=ham autolearn_force=no + version=3.4.2 +Received: from mailout2.w1.samsung.com (mailout2.w1.samsung.com + [210.118.77.12]) + (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) + (No client certificate requested) + by phobos.denx.de (Postfix) with ESMTPS id 791718020E + for ; Thu, 17 Jun 2021 11:22:09 +0200 (CEST) +Authentication-Results: phobos.denx.de; + dmarc=pass (p=none dis=none) header.from=samsung.com +Authentication-Results: phobos.denx.de; + spf=pass smtp.mailfrom=m.szyprowski@samsung.com +Received: from eucas1p1.samsung.com (unknown [182.198.249.206]) + by mailout2.w1.samsung.com (KnoxPortal) with ESMTP id + 20210617092208euoutp02306cccdadbd0a0fa3e360e9b40c870e4~JVDVFtPo90470104701euoutp02N + for ; Thu, 17 Jun 2021 09:22:08 +0000 (GMT) +DKIM-Filter: OpenDKIM Filter v2.11.0 mailout2.w1.samsung.com + 20210617092208euoutp02306cccdadbd0a0fa3e360e9b40c870e4~JVDVFtPo90470104701euoutp02N +DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=samsung.com; + s=mail20170921; t=1623921728; + bh=g6sGWmD8hHxoWJS92fMYWdZG8PUB5T7hF5BCApkjjtQ=; + h=From:To:Cc:Subject:Date:References:From; + b=S423zQBAD3CJixEJMLt4LIue0UknKK6dcTJTYm0QESnzOGnr8JSiTSWbI42vYfeEr + uPY3rg88YpmiNYbY2UtEBDu9k20/SxO3xqChy69dH5g2tu3FlkC+Y9+355chFE9zhR + YtgdD6ME6PXoo6ju6YGnhtM4h3d1wOCBgZ8DRNHg= +Received: from eusmges3new.samsung.com (unknown [203.254.199.245]) by + eucas1p2.samsung.com (KnoxPortal) with ESMTP id + 20210617092207eucas1p254ca42a27f671fd370b24d43d77bced7~JVDUqibou0517905179eucas1p28; + Thu, 17 Jun 2021 09:22:07 +0000 (GMT) +Received: from eucas1p1.samsung.com ( [182.198.249.206]) by + eusmges3new.samsung.com (EUCPMTA) with SMTP id 97.82.09439.F341BC06; Thu, 17 + Jun 2021 10:22:07 +0100 (BST) +Received: from eusmtrp1.samsung.com (unknown [182.198.249.138]) by + eucas1p2.samsung.com (KnoxPortal) with ESMTPA id + 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79~JVDULHlNB0517805178eucas1p2x; + Thu, 17 Jun 2021 09:22:07 +0000 (GMT) +Received: from eusmgms1.samsung.com (unknown [182.198.249.179]) by + eusmtrp1.samsung.com (KnoxPortal) with ESMTP id + 20210617092207eusmtrp1b3838c7f35a29ad48395199a93d03d9f~JVDUKaS5h2885128851eusmtrp1P; + Thu, 17 Jun 2021 09:22:07 +0000 (GMT) +X-AuditID: cbfec7f5-c03ff700000024df-38-60cb143fddfe +Received: from eusmtip2.samsung.com ( [203.254.199.222]) by + eusmgms1.samsung.com (EUCPMTA) with SMTP id 8C.31.08705.F341BC06; Thu, 17 + Jun 2021 10:22:07 +0100 (BST) +Received: from AMDC2765.digital.local (unknown [106.120.51.73]) by + eusmtip2.samsung.com (KnoxPortal) with ESMTPA id + 20210617092206eusmtip2389e23cf1a3074d360ad1974f6ed1b53~JVDTufYcj1280412804eusmtip2z; + Thu, 17 Jun 2021 09:22:06 +0000 (GMT) +From: Marek Szyprowski +To: u-boot@lists.denx.de +Cc: Marek Szyprowski , Matthias Brugger + , Sylwester Nawrocki , Nicolas + Saenz Julienne , Jaehoon Chung + , Bartlomiej Zolnierkiewicz + +Subject: [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI + device base +Date: Thu, 17 Jun 2021 11:22:03 +0200 +Message-Id: <20210617092203.19825-1-m.szyprowski@samsung.com> +X-Mailer: git-send-email 2.17.1 +X-Brightmail-Tracker: + H4sIAAAAAAAAA+NgFrrDIsWRmVeSWpSXmKPExsWy7djPc7r2IqcTDB40GFtsnLGe1eLGrzZW + i7VH7rJbLJj8hNVi26zlbBaH37SzWrzd28nuwO5x9s4ORo++LasYPdZvucrisfl0dQBLFJdN + SmpOZllqkb5dAlfG+eermQqO8lT09y5naWC8xtXFyMkhIWAi0X/mMEsXIxeHkMAKRol9356w + dzFyADlfGCVuhkHEPzNKNNycywLT8G/nNkaIxHJGiaWdm1ghHKCGffe+sYNUsQkYSnS97WID + sUUEJCR+9V8F62AWmMkk0dw5kRUkISwQLvH7/2xGEJtFQFWib/cHsAZeAVuJl+e62SDWyUus + 3nCAGaRZQuAnu8Si7/sYIRIuEo+6V0LZwhKvjm9hh7BlJE5P7mGBaGhmlHh4bi07hNPDKHG5 + aQZUh7XEnXO/2EA+ZRbQlFi/Sx/ElBBwlJg7gR/C5JO48VYQpJgZyJy0bTozRJhXoqNNCGKG + msSs4+vgth68cIkZwvaQuPd4Pdj5QgKxEkcOfWScwCg3C2HVAkbGVYziqaXFuempxcZ5qeV6 + xYm5xaV56XrJ+bmbGIEJ4PS/4193MK549VHvECMTB+MhRgkOZiURXt3iEwlCvCmJlVWpRfnx + RaU5qcWHGKU5WJTEeXdtXRMvJJCeWJKanZpakFoEk2Xi4JRqYBJge2bX53WWz1Lf4MPq4pKd + L2Z7TUp3VDv2fwfHf6Y2rg5e979vjNICyxdMeW+qc0OHOVT8Q+3kj7qOC66fOsy4xb61uH4h + 951lnRF8exoM9TeGJ715tqduV6XnjaXVPyYtMn03k3MLb92nXs2vNxpuFebsiS62yarPnZ9d + ZPBOU0yvpoR307TFV/niSsVfeYrt4A/k1bB+WKXxd382MxdrGIvDrJUsCSsW7NglYTjXcVbO + 1bzaJ8lfWv7511UuqNvpJJ+093bvgWOlqbeVfjW2v3j+fP79PKeNgUle3dO622YUq2S4Cyh/ + DZbd7mC8SedY8eZZfxdGrozhnGFmGj9nwTKzJQWb562Rl/9prMRSnJFoqMVcVJwIAFvDw65v + AwAA +X-Brightmail-Tracker: + H4sIAAAAAAAAA+NgFtrCLMWRmVeSWpSXmKPExsVy+t/xe7r2IqcTDNb0CFlsnLGe1eLGrzZW + i7VH7rJbLJj8hNVi26zlbBaH37SzWrzd28nuwO5x9s4ORo++LasYPdZvucrisfl0dQBLlJ5N + UX5pSapCRn5xia1StKGFkZ6hpYWekYmlnqGxeayVkamSvp1NSmpOZllqkb5dgl7G+eermQqO + 8lT09y5naWC8xtXFyMkhIWAi8W/nNsYuRi4OIYGljBJP/q5gh0jISJyc1sAKYQtL/LnWxQZR + 9IlRYs/8y2AJNgFDia63IAlODhEBCYlf/VfBJjELzGaSeL7iLhNIQlggVOL5jHVgDSwCqhJ9 + uz+ANfAK2Eq8PNfNBrFBXmL1hgPMExh5FjAyrGIUSS0tzk3PLTbUK07MLS7NS9dLzs/dxAgM + vm3Hfm7ewTjv1Ue9Q4xMHIyHGCU4mJVEeHWLTyQI8aYkVlalFuXHF5XmpBYfYjQF2jeRWUo0 + OR8Y/nkl8YZmBqaGJmaWBqaWZsZK4rxb566JFxJITyxJzU5NLUgtgulj4uCUamAyvS18MHIp + 7+EpilHuXy7d3MPzPnfRlSWnFr5+m5lzNSx03owzNw51LmK5Hv4vJ6nPlaHi3Ma1ZubH/23N + uHX0nlWi8bL9jxzLqptsE0+y961tVtRKuvD/QGJR1+3NeoUWKW7rH9pz89YdcnimPGWf7Jb/ + fVnJZ6tdbPuu3nv29sWhteIKixdUX1rlHzUtVfyN0ILXawqfTJU7/SR/jtrSjMpvufKfZKb+ + 3b1sW2hkU2aN9VuDk+52mbFrb3P/1LzhsN309FfG24tY3TjtzFaLf35WI6rUZiAa8lNEtFJE + 1a9l8zLRs3wbm574XwmsP111UPfxm4q0yHKuE6GbZm1T/LfpzOkcP6Yg1r+3Vmy8osRSnJFo + qMVcVJwIAKDUsMjHAgAA +X-CMS-MailID: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79 +X-Msg-Generator: CA +X-RootMTR: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79 +X-EPHeader: CA +CMS-TYPE: 201P +X-CMS-RootMailID: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79 +References: + +X-BeenThere: u-boot@lists.denx.de +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: U-Boot discussion +List-Unsubscribe: , + +List-Archive: +List-Post: +List-Help: +List-Subscribe: , + +Errors-To: u-boot-bounces@lists.denx.de +Sender: "U-Boot" +X-Virus-Scanned: clamav-milter 0.103.2 at phobos.denx.de +X-Virus-Status: Clean + +Move the XHCI PCI device base up in the virtual address space. This fixes +initialization failure observed with newer Raspberry Pi firmware, later +than 63b1922311 ("firmware: arm_loader: Update armstubs with those from +PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base +conflicts with the updated ARM/VideoCore firmware. + +This also requires to reduce the size of the mapped PCI device region +from 8MiB to 4MiB to fit into 32bit address space. This is still enough +for the XHCI PCI device. + +Signed-off-by: Marek Szyprowski +Reviewed-by: Jaehoon Chung +Reviewed-by: Nicolas Saenz Julienne +Tested-by: Stefan Agner +--- +This fixes the issue observed on ARM 32bit after upgrading the RPi4 +firmware files, described some time ago here: +https://lists.denx.de/pipermail/u-boot/2021-February/442317.html +--- + arch/arm/mach-bcm283x/init.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c +index 49027ce0a2..9803499985 100644 +--- a/arch/arm/mach-bcm283x/init.c ++++ b/arch/arm/mach-bcm283x/init.c +@@ -14,7 +14,7 @@ + #include + + #define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS 0x600000000UL +-#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE 0x800000UL ++#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE 0x400000UL + + #ifdef CONFIG_ARM64 + #include +@@ -148,7 +148,7 @@ int mach_cpu_init(void) + + #ifdef CONFIG_ARMV7_LPAE + #ifdef CONFIG_TARGET_RPI_4_32B +-#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xff800000UL ++#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xffc00000UL + #include + #include + diff --git a/AllWinner-PineTab.patch b/AllWinner-PineTab.patch new file mode 100644 index 0000000..04b6896 --- /dev/null +++ b/AllWinner-PineTab.patch @@ -0,0 +1,45 @@ +From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Tue, 14 Apr 2020 09:53:07 +0100 +Subject: [PATCH 9/9] initial pinetab support + +Signed-off-by: Peter Robinson +--- + configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + create mode 100644 configs/pinetab_defconfig + +diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig +new file mode 100644 +index 0000000000..5b9620f3e5 +--- /dev/null ++++ b/configs/pinetab_defconfig +@@ -0,0 +1,26 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I=y ++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y ++CONFIG_DRAM_CLK=552 ++CONFIG_DRAM_ZQ=3881949 ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_R_I2C_ENABLE=y ++CONFIG_SPL_SPI_SUNXI=y ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_USE_PREBOOT=y ++# CONFIG_SPL_DOS_PARTITION is not set ++# CONFIG_SPL_EFI_PARTITION is not set ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab" ++CONFIG_OF_LIST="sun50i-a64-pinetab" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_SUNXI=y ++CONFIG_LED=y ++CONFIG_LED_GPIO=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +-- +2.26.0 diff --git a/Allwinner-fix-booting-on-a-number-of-devices.patch b/Allwinner-fix-booting-on-a-number-of-devices.patch deleted file mode 100644 index 2b08e13..0000000 --- a/Allwinner-fix-booting-on-a-number-of-devices.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b8ea3cebde98866b7cbb4e8f9bb6dfdee529a549 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Wed, 27 Aug 2025 00:23:28 +0100 -Subject: [PATCH] Allwinner: fix booting on a number of devices - -Revert "sunxi: enable MMU_PGPROT proper page table protection" - -This reverts commit 16cfccda4dbf0b53473b8212897f5c63bfbeb6e1. ---- - arch/arm/Kconfig | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig -index 40368abc297..b8be270e4d7 100644 ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1207,7 +1207,6 @@ config ARCH_SUNXI - select DM_SPI_FLASH if SPI && MTD - select DM_KEYBOARD - select DM_SERIAL -- select MMU_PGPROT if ARM64 - select OF_BOARD_SETUP - select OF_CONTROL - select PINCTRL --- -2.51.0 - diff --git a/Fix-NVMe-not-only-on-Raspberry-Pi-5.patch b/Fix-NVMe-not-only-on-Raspberry-Pi-5.patch deleted file mode 100644 index a52ce84..0000000 --- a/Fix-NVMe-not-only-on-Raspberry-Pi-5.patch +++ /dev/null @@ -1,405 +0,0 @@ -From patchwork Mon Jul 6 17:21:47 2026 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Torsten Duwe -X-Patchwork-Id: 2265604 -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=85.214.62.61; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB431Qwzz1xqc - for ; Tue, 07 Jul 2026 03:21:55 +1000 (AEST) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id 179C084942; - Mon, 6 Jul 2026 19:21:52 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Received: by phobos.denx.de (Postfix, from userid 109) - id 82ADE8490A; Mon, 6 Jul 2026 19:21:51 +0200 (CEST) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, - RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham - autolearn_force=no version=3.4.2 -Received: from verein.lst.de (verein.lst.de [213.95.11.211]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 9F24C846B4 - for ; Mon, 6 Jul 2026 19:21:49 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de -Received: by verein.lst.de (Postfix, from userid 2005) - id C934268B05; Mon, 6 Jul 2026 19:21:47 +0200 (CEST) -In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de> -References: <20260706172028.C148E68BEB@verein.lst.de> -Subject: [PATCH v2 1/4] core: Skip parent device nodes without a DT reference - when looking for dma-ranges -To: Neil Armstrong , - Andrew Goodbody , Bin Meng , - Simon Glass -Cc: Tom Rini , Matthias Brugger , - Peter Robinson , - Mattijs Korpershoek , - Marek Vasut , - Heiko Schocher , Svyatoslav Ryhel , - "Lucien.Jheng" , Rasmus Villemoes , - Martin Schwan , - "Markus Schneider-Pargmann (TI.com)" , - Prashant Kamble , - Denis Mukhin , Sughosh Ganu , - u-boot@lists.denx.de -Message-Id: <20260706172147.C934268B05@verein.lst.de> -Date: Mon, 6 Jul 2026 19:21:47 +0200 (CEST) -From: duwe@lst.de (Torsten Duwe) -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -From: Torsten Duwe - -If a device node got created dynamically, there is no guarantee that the -parent node has an associated device tree node which could specify dma -constraints. Especially PCI(e) enumeration adds intermediate "bus nodes", -also dynamically. - -Try harder to find the correct configuration by walking up the tree until -a DT association is found. - -Suggested-by: Neil Armstrong -Signed-off-by: Torsten Duwe -Reviewed-by: Peter Robinson -Tested-by: Peter Robinson ---- - drivers/core/device.c | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - -diff --git a/drivers/core/device.c b/drivers/core/device.c -index d365204ba11..b6d00cf4714 100644 ---- a/drivers/core/device.c -+++ b/drivers/core/device.c -@@ -459,7 +459,19 @@ static int device_get_dma_constraints(struct udevice *dev) - u64 size = 0; - int ret; - -- if (!CONFIG_IS_ENABLED(DM_DMA) || !parent || !dev_has_ofnode(parent)) -+ if (!CONFIG_IS_ENABLED(DM_DMA) || !parent) -+ return 0; -+ -+ /* Look for the first node in the parent chain */ -+ while (parent) { -+ if (dev_has_ofnode(parent)) -+ break; -+ -+ parent = dev_get_parent(parent); -+ } -+ -+ /* No parents have a node, bail out */ -+ if (!parent) - return 0; - - /* - -From patchwork Mon Jul 6 17:21:50 2026 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Torsten Duwe -X-Patchwork-Id: 2265605 -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange x25519) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB481pfXz1xqc - for ; Tue, 07 Jul 2026 03:22:00 +1000 (AEST) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id 9A59684994; - Mon, 6 Jul 2026 19:21:55 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Received: by phobos.denx.de (Postfix, from userid 109) - id EB7D384979; Mon, 6 Jul 2026 19:21:53 +0200 (CEST) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, - RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham - autolearn_force=no version=3.4.2 -Received: from verein.lst.de (verein.lst.de [213.95.11.211]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id EE61C846B4 - for ; Mon, 6 Jul 2026 19:21:51 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de -Received: by verein.lst.de (Postfix, from userid 2005) - id 464E868BEB; Mon, 6 Jul 2026 19:21:50 +0200 (CEST) -In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de> -References: <20260706172028.C148E68BEB@verein.lst.de> -Subject: [PATCH v2 2/4] test: Add a unit test in phys_to_bus for dynamically - created device nodes -To: Neil Armstrong , - Andrew Goodbody , Bin Meng , - Simon Glass -Cc: Tom Rini , Matthias Brugger , - Peter Robinson , - Mattijs Korpershoek , - Marek Vasut , - Heiko Schocher , Svyatoslav Ryhel , - "Lucien.Jheng" , Rasmus Villemoes , - Martin Schwan , - "Markus Schneider-Pargmann (TI.com)" , - Prashant Kamble , - Denis Mukhin , Sughosh Ganu , - u-boot@lists.denx.de -Message-Id: <20260706172150.464E868BEB@verein.lst.de> -Date: Mon, 6 Jul 2026 19:21:50 +0200 (CEST) -From: duwe@lst.de (Torsten Duwe) -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -From: Torsten Duwe - -In order to test whether device_get_dma_constraints() is now able to skip -device nodes without a DT association, temporarily remove those on 2 newly- -created nodes. - -Signed-off-by: Torsten Duwe ---- - -This test indeed makes a different whether the previous change is -applied or not, but *only* reliably for the non-flat-tree case (!?). -On the flat tree, it always fails after (reverse) applying it. - -Either the previous patch is incomplete, or, more likely, the test -assumptions here are not all valid. Suggestions welcome (especially -how to create device nodes from a device tree without a reference to -their origin ;-) - ---- - arch/sandbox/dts/test.dts | 9 +++++++++ - test/dm/phys2bus.c | 25 ++++++++++++++++++++++++- - 2 files changed, 33 insertions(+), 1 deletion(-) - -diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts -index 0887de4333b..1d92e85c739 100644 ---- a/arch/sandbox/dts/test.dts -+++ b/arch/sandbox/dts/test.dts -@@ -656,6 +656,15 @@ - subnode@0 { - compatible = "denx,u-boot-fdt-test"; - }; -+ bus@7 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "denx,u-boot-test-bus"; -+ -+ subnode@8 { -+ compatible = "denx,u-boot-fdt-test"; -+ }; -+ }; - }; - - mmio-bus@1 { -diff --git a/test/dm/phys2bus.c b/test/dm/phys2bus.c -index 67f33904943..858ed5410e2 100644 ---- a/test/dm/phys2bus.c -+++ b/test/dm/phys2bus.c -@@ -15,7 +15,8 @@ - - static int dm_test_phys_to_bus(struct unit_test_state *uts) - { -- struct udevice *dev; -+ struct udevice *dev, *pdev; -+ ofnode psave, nsave; - ofnode node; - - node = ofnode_path("/mmio-bus@0"); -@@ -31,6 +32,29 @@ static int dm_test_phys_to_bus(struct unit_test_state *uts) - ut_asserteq_addr((void*)0x1003ffffULL, (void*)dev_phys_to_bus(dev, 0x3ffff)); - ut_asserteq_addr((void*)0x3ffffULL, (void*)(ulong)dev_bus_to_phys(dev, 0x1003ffff)); - -+#if CONFIG_IS_ENABLED(OF_REAL) -+ /* dma-ranges are on the grandparent bus node, -+ * OF nodes neither here nor at parent -+ */ -+ node = ofnode_path("/mmio-bus@0/bus@7"); -+ ut_assert(ofnode_valid(node)); -+ ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_BUS, node, &pdev)); -+ -+ /* pretend the devices were discovered dynamically and have no OF node */ -+ psave = pdev->node_; -+ pdev->node_.np = NULL; -+ node = ofnode_path("/mmio-bus@0/bus@7/subnode@8"); -+ ut_assert(ofnode_valid(node)); -+ nsave = dev->node_; -+ dev->node_.np = NULL; -+ ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_FDT, node, &dev)); -+ -+ ut_asserteq_addr((void *)0x1003ffffULL, (void *)dev_phys_to_bus(dev, 0x3ffff)); -+ ut_asserteq_addr((void *)0x3ffffULL, (void *)(ulong)dev_bus_to_phys(dev, 0x1003ffff)); -+ -+ pdev->node_ = psave; -+ dev->node_ = nsave; -+#endif - return 0; - } - DM_TEST(dm_test_phys_to_bus, UTF_SCAN_PDATA | UTF_SCAN_FDT); - -From patchwork Mon Jul 6 17:21:54 2026 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Torsten Duwe -X-Patchwork-Id: 2265607 -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange x25519) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB4R378Lz1xqc - for ; Tue, 07 Jul 2026 03:22:15 +1000 (AEST) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id 3FDAE8490A; - Mon, 6 Jul 2026 19:21:59 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Received: by phobos.denx.de (Postfix, from userid 109) - id 17F418490A; Mon, 6 Jul 2026 19:21:58 +0200 (CEST) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, - RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham - autolearn_force=no version=3.4.2 -Received: from verein.lst.de (verein.lst.de [213.95.11.211]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 1D593849A4 - for ; Mon, 6 Jul 2026 19:21:56 +0200 (CEST) -Authentication-Results: phobos.denx.de; - dmarc=fail (p=none dis=none) header.from=lst.de -Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de -Received: by verein.lst.de (Postfix, from userid 2005) - id B506B68CFE; Mon, 6 Jul 2026 19:21:54 +0200 (CEST) -In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de> -References: <20260706172028.C148E68BEB@verein.lst.de> -Subject: [PATCH v2 4/4] configs: enable NVMe -To: Neil Armstrong , - Andrew Goodbody , Bin Meng , - Simon Glass -Cc: Tom Rini , Matthias Brugger , - Peter Robinson , - Mattijs Korpershoek , - Marek Vasut , - Heiko Schocher , Svyatoslav Ryhel , - "Lucien.Jheng" , Rasmus Villemoes , - Martin Schwan , - "Markus Schneider-Pargmann (TI.com)" , - Prashant Kamble , - Denis Mukhin , Sughosh Ganu , - u-boot@lists.denx.de -Message-Id: <20260706172154.B506B68CFE@verein.lst.de> -Date: Mon, 6 Jul 2026 19:21:54 +0200 (CEST) -From: duwe@lst.de (Torsten Duwe) -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -From: Torsten Duwe - -Enable NVMe in the Raspberry Pi 64-Bit default config and scan for devices. - -Signed-off-by: Torsten Duwe -Reviewed-by: Peter Robinson -Tested-by: Peter Robinson ---- - configs/rpi_arm64_defconfig | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig -index cdcf05ea6db..fb0fdce1d7f 100644 ---- a/configs/rpi_arm64_defconfig -+++ b/configs/rpi_arm64_defconfig -@@ -16,7 +16,7 @@ CONFIG_BOOTSTD_DEFAULTS=y - CONFIG_OF_BOARD_SETUP=y - CONFIG_FDT_SIMPLEFB=y - CONFIG_USE_PREBOOT=y --CONFIG_PREBOOT="pci enum; usb start;" -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_SYS_PBSIZE=1049 - # CONFIG_DISPLAY_CPUINFO is not set - # CONFIG_DISPLAY_BOARDINFO is not set -@@ -44,6 +44,7 @@ CONFIG_MMC_SDHCI_SDMA=y - CONFIG_MMC_SDHCI_BCM2835=y - CONFIG_MMC_SDHCI_BCMSTB=y - CONFIG_BCMGENET=y -+CONFIG_NVME_PCI=y - CONFIG_PCI_BRCMSTB=y - CONFIG_PINCTRL=y - # CONFIG_PINCTRL_GENERIC is not set diff --git a/JetsonTX2-Fix-upstream-device-tree-naming.patch b/JetsonTX2-Fix-upstream-device-tree-naming.patch deleted file mode 100644 index 14242ce..0000000 --- a/JetsonTX2-Fix-upstream-device-tree-naming.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 4ee5ba36570d94ce27e4023f15b8b3a6b8b9daf9 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Mon, 13 Oct 2025 21:41:13 +0100 -Subject: [PATCH] config: JetsonTX2: Fix upstream device tree naming - -The upstream naming for the Jetson TX2 is p2771-0000 so fix -the device tree name so the firmware will find the right -name on disk. - -Signed-off-by: Peter Robinson ---- - arch/arm/dts/Makefile | 2 +- - .../{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts} | 0 - configs/p2771-0000-500_defconfig | 2 +- - 3 files changed, 2 insertions(+), 2 deletions(-) - rename arch/arm/dts/{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts} (100%) - -diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile -index 7c8cf3a5a1d..86a7b4fda35 100644 ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -134,7 +134,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += \ - tegra124-venice2.dtb \ - tegra124-xiaomi-mocha.dtb \ - tegra186-p2771-0000-000.dtb \ -- tegra186-p2771-0000-500.dtb \ -+ tegra186-p2771-0000.dtb \ - tegra210-p2371-0000.dtb \ - tegra210-p2371-2180.dtb \ - tegra210-p2571.dtb \ -diff --git a/arch/arm/dts/tegra186-p2771-0000-500.dts b/arch/arm/dts/tegra186-p2771-0000.dts -similarity index 100% -rename from arch/arm/dts/tegra186-p2771-0000-500.dts -rename to arch/arm/dts/tegra186-p2771-0000.dts -diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig -index 42043277e2d..e1e5c47ddfa 100644 ---- a/configs/p2771-0000-500_defconfig -+++ b/configs/p2771-0000-500_defconfig -@@ -7,7 +7,7 @@ CONFIG_TEXT_BASE=0x80080000 - CONFIG_NR_DRAM_BANKS=1026 - CONFIG_ENV_SIZE=0x2000 - CONFIG_ENV_OFFSET=0xFFFFE000 --CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500" -+CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000" - CONFIG_SYS_BOOTM_LEN=0x800000 - CONFIG_SYS_LOAD_ADDR=0x80080000 - CONFIG_TEGRA186=y --- -2.51.0 - diff --git a/USB-PD-TCPM-improvements.patch b/USB-PD-TCPM-improvements.patch deleted file mode 100644 index f84e6f3..0000000 --- a/USB-PD-TCPM-improvements.patch +++ /dev/null @@ -1,717 +0,0 @@ -From patchwork Wed Feb 26 18:44:44 2025 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Sebastian Reichel -X-Patchwork-Id: 2052544 -X-Patchwork-Delegate: marek.vasut@gmail.com -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.a=rsa-sha256 header.s=mail header.b=IthL1Z+m; - dkim-atps=neutral -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature ECDSA (secp384r1)) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M03Hhjz1yCp - for ; Thu, 27 Feb 2025 05:45:32 +1100 (AEDT) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id BFF7680FF0; - Wed, 26 Feb 2025 19:45:16 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Authentication-Results: phobos.denx.de; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.b="IthL1Z+m"; - dkim-atps=neutral -Received: by phobos.denx.de (Postfix, from userid 109) - id 7614F810F9; Wed, 26 Feb 2025 19:45:13 +0100 (CET) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, - DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, - SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 -Received: from bali.collaboradmins.com (bali.collaboradmins.com - [IPv6:2a01:4f8:201:9162::2]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 2173180FDE - for ; Wed, 26 Feb 2025 19:45:08 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=sebastian.reichel@collabora.com -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; - s=mail; t=1740595507; - bh=Fnp6a8opSCXiH5NJdu5uivbBBZF3pe1CXyluh8+n8/c=; - h=From:To:Cc:Subject:Date:In-Reply-To:References:From; - b=IthL1Z+mDeIRy9MWEa0lGyJWuHk/Pu+yUpLly7RG6NIpC0lCgla3ssiy2x+8/G+bz - DWjrKUMxgWtqfjfffRiKEJZ6Z2sAXJ1ePvDmMtbGoolWSrzsV2+cWh0byYrEBuVBe9 - Vp0ye7gJ4Wt610s4QHa4xoYcm7h9KGmE3IEjb+XYFv1HMJIOoACl04BwkLctza1KBr - XlIqC+snvRP/yQxa2+6RYGXgQD5JnJxCM1orXVIJxyyJxTzb3XgNir60Gb4HI9724H - LDZy0Hq7NQ1zF0h1yVUOklDotw17isbNoI4K3JCExR+r7GsdESsGY6cwAbZY71iWlf - OsSSrV6TZtAMg== -Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de - [91.249.76.32]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature RSA-PSS (4096 bits)) - (No client certificate requested) (Authenticated sender: sre) - by bali.collaboradmins.com (Postfix) with ESMTPSA id A18CC17E0881; - Wed, 26 Feb 2025 19:45:07 +0100 (CET) -Received: by jupiter.universe (Postfix, from userid 1000) - id 32E35480034; Wed, 26 Feb 2025 19:45:07 +0100 (CET) -From: Sebastian Reichel -To: Marek Vasut , u-boot@lists.denx.de, - Jonas Karlman , Soeren Moch -Cc: Tim Harvey , - Philipp Tomsich , - Anand Moon , Maxim Kiselev , - Sebastian Reichel -Subject: [PATCH v2 1/4] usb: tcpm: improve handling of some power-supplies -Date: Wed, 26 Feb 2025 19:44:44 +0100 -Message-ID: <20250226184506.64114-2-sebastian.reichel@collabora.com> -X-Mailer: git-send-email 2.47.2 -In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com> -References: <20250226184506.64114-1-sebastian.reichel@collabora.com> -MIME-Version: 1.0 -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -When the Rock 5B is booted with the current TCPM with its power supplied -by a "Cambrionix PDSync-C4" port it reaches the power-supply ready state. -Once that has happened the hub starts sending GetSinkCap messages, but -U-Boot already stopped processing PD messages. After retrying a bunch of -times the hub instead sends soft resets. Since U-Boot will also not -react to them, the USB hub will follow-up with a hard reset and that -cuts off the supply voltage. - -Since the state machine is already prepared to handle GetSinkCap -messages, try to avoid this by handling incoming messages for another -50ms after reaching the ready state. - -Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework") -Signed-off-by: Sebastian Reichel ---- - drivers/usb/tcpm/tcpm.c | 31 ++++++++++++++++++++++++++----- - 1 file changed, 26 insertions(+), 5 deletions(-) - -diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c -index 0aee57cb2f4a..b754b4dcd0b5 100644 ---- a/drivers/usb/tcpm/tcpm.c -+++ b/drivers/usb/tcpm/tcpm.c -@@ -2229,6 +2229,17 @@ static int tcpm_port_init(struct udevice *dev) - return 0; - } - -+static inline void tcpm_poll_one_event(struct udevice *dev) -+{ -+ const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev); -+ struct tcpm_port *port = dev_get_uclass_plat(dev); -+ -+ drvops->poll_event(dev); -+ port->poll_event_cnt++; -+ udelay(500); -+ tcpm_check_and_run_delayed_work(dev); -+} -+ - static void tcpm_poll_event(struct udevice *dev) - { - const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev); -@@ -2242,15 +2253,25 @@ static void tcpm_poll_event(struct udevice *dev) - (port->state == SNK_READY || port->state == SRC_READY)) - break; - -- drvops->poll_event(dev); -- port->poll_event_cnt++; -- udelay(500); -- tcpm_check_and_run_delayed_work(dev); -+ tcpm_poll_one_event(dev); - } - -- if (port->state != SNK_READY && port->state != SRC_READY) -+ /* -+ * Some power-supplies send GetSinkCap shortly after they are ready. -+ * If they do not receive a response after a few retries they will issue -+ * a soft-reset followed by a hard reset, which kills the board power. -+ * Let's poll for 50ms after reaching the ready state to check if the -+ * power-supply wants something from us. -+ */ -+ if (port->state == SNK_READY) { -+ port->poll_event_cnt = 0; -+ -+ while (port->poll_event_cnt < 100) -+ tcpm_poll_one_event(dev); -+ } else { - dev_warn(dev, "TCPM: exit in state %s\n", - tcpm_states[port->state]); -+ } - - /* - * At this time, call the callback function of the respective pd chip - -From patchwork Wed Feb 26 18:44:45 2025 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Sebastian Reichel -X-Patchwork-Id: 2052546 -X-Patchwork-Delegate: marek.vasut@gmail.com -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.a=rsa-sha256 header.s=mail header.b=hgX6o5vZ; - dkim-atps=neutral -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature ECDSA (secp384r1)) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33MJ5sFGz1yCp - for ; Thu, 27 Feb 2025 05:45:48 +1100 (AEDT) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id 69A29811C5; - Wed, 26 Feb 2025 19:45:17 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Authentication-Results: phobos.denx.de; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.b="hgX6o5vZ"; - dkim-atps=neutral -Received: by phobos.denx.de (Postfix, from userid 109) - id 832B180FB9; Wed, 26 Feb 2025 19:45:14 +0100 (CET) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, - DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, - RCVD_IN_VALIDITY_RPBL_BLOCKED,RCVD_IN_VALIDITY_SAFE_BLOCKED, - SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 -Received: from bali.collaboradmins.com (bali.collaboradmins.com - [148.251.105.195]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 2178380FF0 - for ; Wed, 26 Feb 2025 19:45:08 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=sebastian.reichel@collabora.com -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; - s=mail; t=1740595507; - bh=H/gQCZCWVmLNRIaBLvWsE35SaDMWvta2+rTkymkHQJE=; - h=From:To:Cc:Subject:Date:In-Reply-To:References:From; - b=hgX6o5vZwM72CR2hgo76tgo2eE00qHM7oNja381ACl8gIUUVioy8RTeqXtum89tBf - aIwKm/oNQNvGxy92pX5/1Jg/MwYZKS8jDukz6ZgsLKu22rJXf58FFoV095AcEkUMB2 - lrO4KJgFW/x1FK8GmSVSXXH+iUYJLkzsfZKgHKoQYHZcVXJRgFjHR5ytGKsA/fq4el - 7Wrx3lmLNjL7fYlDF5AyY+Wl6hqzjDq58nFedXHv8TEHx6fzfB0IBzOL/F8bGqVcyy - lal7bjJvMPoA9zfgIC77R1neWktg5FSro75YciSRSj9lmMNCmESnSPCgsZ4wBW0V6f - ppD77gOtjDfLQ== -Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de - [91.249.76.32]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature RSA-PSS (4096 bits)) - (No client certificate requested) (Authenticated sender: sre) - by bali.collaboradmins.com (Postfix) with ESMTPSA id 9725D17E087F; - Wed, 26 Feb 2025 19:45:07 +0100 (CET) -Received: by jupiter.universe (Postfix, from userid 1000) - id 34511480037; Wed, 26 Feb 2025 19:45:07 +0100 (CET) -From: Sebastian Reichel -To: Marek Vasut , u-boot@lists.denx.de, - Jonas Karlman , Soeren Moch -Cc: Tim Harvey , - Philipp Tomsich , - Anand Moon , Maxim Kiselev , - Sebastian Reichel -Subject: [PATCH v2 2/4] usb: tcpm: avoid resets for missing source capability - messages -Date: Wed, 26 Feb 2025 19:44:45 +0100 -Message-ID: <20250226184506.64114-3-sebastian.reichel@collabora.com> -X-Mailer: git-send-email 2.47.2 -In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com> -References: <20250226184506.64114-1-sebastian.reichel@collabora.com> -MIME-Version: 1.0 -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -The current TCPM code implements source capability message handling -according to the USB-PD specification. Unfortunately some USB PD -sources do not properly follow the specification and do not send -source capability messages after a soft reset when they already -negotiated a specific contract before. The currently implemented way -(and what is described in the specificiation) to resolve this problem -is triggering a hard reset. - -But a hard reset is fatal on batteryless platforms powered via USB-C PD, -since that removes VBUS for some time. Since this is triggered at boot -time, the system may get stuck in a boot loop. - -For example I noticed the following behaviour on a Radxa Rock 5B -combined with an affected power-supply: - -1. The system is booted up with current code -2. A reboot is requested -3. U-Boot TCPM / fusb302 driver sends soft reset and waits for the - source capability message -4. No new source capability message is send by the power-supply - after the soft reset -5. U-Boot sends a hard reset -6. The board resets, but the fusb302 registers are not reset. This - is because of a hardware glitch. The serial pins are high when - no data is exchanged. Apparently the RK3588 has protection diodes, - which leak some voltage into the power-domain. The Rock 5B serial - pins and the fusb302 are using the same 3.3V power domain and the - leaked voltage is enough to keep the fusb302 registers alive. -7. After the hard reset the power-supply sends another source capability - message, which is auto-acked by fusb302 (because the register state - is kept) even though the U-Boot driver has not yet probed. Once the - U-Boot driver probes it sends another soft reset and waits for a new - source capability message, which never arrives. - -Fortunately the affected power-supplies (I have two setups showing this -behaviour) support sending a source capability message when explicitly -being asked. Thus an easy workaround to handle this is deviating from -the USB-PD specification and sending a Get_Source_Cap message and -waiting some time longer before doing the hard reset. - -Note, that I recently added the same workaround to the Linux kernel -with a slightly different rationale (since it needs to take over from -U-Boot). - -Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework") -Signed-off-by: Sebastian Reichel ---- - drivers/usb/tcpm/tcpm-internal.h | 1 + - drivers/usb/tcpm/tcpm.c | 32 +++++++++++++++++++++++++++++--- - 2 files changed, 30 insertions(+), 3 deletions(-) - -diff --git a/drivers/usb/tcpm/tcpm-internal.h b/drivers/usb/tcpm/tcpm-internal.h -index 561442090027..4861f4d13866 100644 ---- a/drivers/usb/tcpm/tcpm-internal.h -+++ b/drivers/usb/tcpm/tcpm-internal.h -@@ -30,6 +30,7 @@ - S(SNK_DISCOVERY_DEBOUNCE), \ - S(SNK_DISCOVERY_DEBOUNCE_DONE), \ - S(SNK_WAIT_CAPABILITIES), \ -+ S(SNK_WAIT_CAPABILITIES_TIMEOUT), \ - S(SNK_NEGOTIATE_CAPABILITIES), \ - S(SNK_TRANSITION_SINK), \ - S(SNK_TRANSITION_SINK_VBUS), \ -diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c -index b754b4dcd0b5..786d92fa4c6f 100644 ---- a/drivers/usb/tcpm/tcpm.c -+++ b/drivers/usb/tcpm/tcpm.c -@@ -1424,7 +1424,8 @@ static inline enum tcpm_state hard_reset_state(struct tcpm_port *port) - return ERROR_RECOVERY; - if (port->pwr_role == TYPEC_SOURCE) - return SRC_UNATTACHED; -- if (port->state == SNK_WAIT_CAPABILITIES) -+ if (port->state == SNK_WAIT_CAPABILITIES || -+ port->state == SNK_WAIT_CAPABILITIES_TIMEOUT) - return SNK_READY; - return SNK_UNATTACHED; - } -@@ -1650,10 +1651,35 @@ static void run_state_machine(struct udevice *dev) - tcpm_set_state(dev, SOFT_RESET_SEND, - PD_T_SINK_WAIT_CAP); - } else { -- tcpm_set_state(dev, hard_reset_state(port), -- PD_T_SINK_WAIT_CAP); -+ if (!port->self_powered) -+ tcpm_set_state(dev, SNK_WAIT_CAPABILITIES_TIMEOUT, -+ PD_T_SINK_WAIT_CAP); -+ else -+ tcpm_set_state(dev, hard_reset_state(port), -+ PD_T_SINK_WAIT_CAP); - } - break; -+ case SNK_WAIT_CAPABILITIES_TIMEOUT: -+ /* -+ * There are some USB PD sources in the field, which do not -+ * properly implement the specification and fail to start -+ * sending Source Capability messages after a soft reset. The -+ * specification suggests to do a hard reset when no Source -+ * capability message is received within PD_T_SINK_WAIT_CAP, -+ * but that might effectively kil the machine's power source. -+ * -+ * This slightly diverges from the specification and tries to -+ * recover from this by explicitly asking for the capabilities -+ * using the Get_Source_Cap control message before falling back -+ * to a hard reset. The control message should also be supported -+ * and handled by all USB PD source and dual role devices -+ * according to the specification. -+ */ -+ if (tcpm_pd_send_control(dev, PD_CTRL_GET_SOURCE_CAP)) -+ tcpm_set_state_cond(dev, hard_reset_state(port), 0); -+ else -+ tcpm_set_state(dev, hard_reset_state(port), PD_T_SINK_WAIT_CAP); -+ break; - case SNK_NEGOTIATE_CAPABILITIES: - port->pd_capable = true; - port->hard_reset_count = 0; - -From patchwork Wed Feb 26 18:44:46 2025 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Sebastian Reichel -X-Patchwork-Id: 2052545 -X-Patchwork-Delegate: marek.vasut@gmail.com -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.a=rsa-sha256 header.s=mail header.b=BxTv7Lfo; - dkim-atps=neutral -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=85.214.62.61; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M971h7z1yCp - for ; Thu, 27 Feb 2025 05:45:41 +1100 (AEDT) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id 1B09C8118B; - Wed, 26 Feb 2025 19:45:17 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Authentication-Results: phobos.denx.de; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.b="BxTv7Lfo"; - dkim-atps=neutral -Received: by phobos.denx.de (Postfix, from userid 109) - id 4399E810F9; Wed, 26 Feb 2025 19:45:14 +0100 (CET) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, - DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, - SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 -Received: from bali.collaboradmins.com (bali.collaboradmins.com - [IPv6:2a01:4f8:201:9162::2]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 2163F80FB9 - for ; Wed, 26 Feb 2025 19:45:08 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=sebastian.reichel@collabora.com -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; - s=mail; t=1740595507; - bh=7OaDpd2idE5ETWAiOZte0kuOU6ZYitEVWkDgDmqaQU8=; - h=From:To:Cc:Subject:Date:In-Reply-To:References:From; - b=BxTv7LfoAae43YSXPquVPmmwStgQirXCxaSBD0fo554R5O/si/Iif5L+zXXJocATJ - z7+I7ZKbknkTeVyzoRDCXvXIVz2bFdTRWQN4Z2iwJbVI1covAv/Gn4wIE2Q6hbNKbU - qV5AKg7gvrKkbztbo7N9bHNjkrlAbd8B4Ew3SR8FM46DMAOwNzVsoX3rLMcPtlWzHj - 4OBKCx22H/4ASIWjMbYoDE09DyQ+CPOf8JcX8OPwFcH9j6vW6cEWvyjiAyDj6LnwOq - KD+ZYVIkWhkIzAkE2NHB2IpA4xlxW8i18BJzNBD8N1eBx/HCgb0camb4KanY1Hta/d - 4ipLyuFaCkMog== -Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de - [91.249.76.32]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest - SHA256) - (No client certificate requested) (Authenticated sender: sre) - by bali.collaboradmins.com (Postfix) with ESMTPSA id 816AA17E0861; - Wed, 26 Feb 2025 19:45:07 +0100 (CET) -Received: by jupiter.universe (Postfix, from userid 1000) - id 361F2480038; Wed, 26 Feb 2025 19:45:07 +0100 (CET) -From: Sebastian Reichel -To: Marek Vasut , u-boot@lists.denx.de, - Jonas Karlman , Soeren Moch -Cc: Tim Harvey , - Philipp Tomsich , - Anand Moon , Maxim Kiselev , - Sebastian Reichel -Subject: [PATCH v2 3/4] usb: tcpm: print error on hard reset -Date: Wed, 26 Feb 2025 19:44:46 +0100 -Message-ID: <20250226184506.64114-4-sebastian.reichel@collabora.com> -X-Mailer: git-send-email 2.47.2 -In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com> -References: <20250226184506.64114-1-sebastian.reichel@collabora.com> -MIME-Version: 1.0 -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -A USB-PD hard reset involves removing the voltage from VBUS for some -time. So basically it has the same effect as removing the USB-C plug -for a short moment. If the machine is powered from the USB-C port and -does not have a fallback supply (e.g. a battery), this will result in -a full machine reset due to power loss. - -Ideally we want to avoid triggering a hard reset on these boards. A -non-working USB-C port is probably better than unplanned reboots. But -boards with a backup supply should do the hard reset to get everything -working again. - -In theory it would be enough to check the self_powered property, but -it seems the property might not be configured consistently enough in -system firmwares. - -USB-PD hard resets should happen rarely in general, so let's at least -print an error message before the potential board reset happens. This -is also useful, since it immediately gives away which device triggered -the hard reset. - -Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework") -Signed-off-by: Sebastian Reichel ---- - drivers/usb/tcpm/tcpm.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c -index 786d92fa4c6f..909fe2ef4fcb 100644 ---- a/drivers/usb/tcpm/tcpm.c -+++ b/drivers/usb/tcpm/tcpm.c -@@ -1711,6 +1711,8 @@ static void run_state_machine(struct udevice *dev) - - /* Hard_Reset states */ - case HARD_RESET_SEND: -+ if (!port->self_powered && port->port_type == TYPEC_PORT_SNK) -+ dev_err(dev, "Initiating hard-reset, which might result in machine power-loss.\n"); - tcpm_pd_transmit(dev, TCPC_TX_HARD_RESET, NULL); - tcpm_set_state(dev, HARD_RESET_START, 0); - port->wait_dr_swap_message = false; - -From patchwork Wed Feb 26 18:44:47 2025 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Sebastian Reichel -X-Patchwork-Id: 2052542 -X-Patchwork-Delegate: marek.vasut@gmail.com -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.a=rsa-sha256 header.s=mail header.b=K4mNmlOy; - dkim-atps=neutral -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature ECDSA (secp384r1)) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33Lk40FPz1yCp - for ; Thu, 27 Feb 2025 05:45:18 +1100 (AEDT) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id DAFC780FF2; - Wed, 26 Feb 2025 19:45:12 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Authentication-Results: phobos.denx.de; - dkim=pass (2048-bit key; - unprotected) header.d=collabora.com header.i=@collabora.com - header.b="K4mNmlOy"; - dkim-atps=neutral -Received: by phobos.denx.de (Postfix, from userid 109) - id 56A22810F9; Wed, 26 Feb 2025 19:45:11 +0100 (CET) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, - DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, - SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 -Received: from bali.collaboradmins.com (bali.collaboradmins.com - [IPv6:2a01:4f8:201:9162::2]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) - (No client certificate requested) - by phobos.denx.de (Postfix) with ESMTPS id 217E080FF2 - for ; Wed, 26 Feb 2025 19:45:08 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=collabora.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=sebastian.reichel@collabora.com -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; - s=mail; t=1740595507; - bh=FeXZr6pfjIqGXvnsLHDigD702EmgVNH91IWVsD16udQ=; - h=From:To:Cc:Subject:Date:In-Reply-To:References:From; - b=K4mNmlOycXzLuJnNeDxyXLVCeZWNr//ycRqDt3ld9634ThDvJ0+y49X3z2nYW+fei - HCqH2AoFiXj7khjiFpwCA4xOlYaTrF9yb0M9ApRxJ8vGuslNIK2k9osj8IJMoWmY8S - fEez4H6Wso4VamCnXKCze2G5np5mhola5QxSnIJ2CXdFP9TM1x54P+XyeJMX6IZK0X - lpZ0R8mACHGgXnkBASRMbo0CnLfSVrUgA83A0FHT7UgxfW8399wHol/FBakg5WS8nt - 47154TDW4ikoGF4dHBeD0KemJSR7I4F+nnUVQfgg8sXZKVm4yilBT+yx3WWBVCjQDl - 3igqfexnaUKnA== -Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de - [91.249.76.32]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest - SHA256) - (No client certificate requested) (Authenticated sender: sre) - by bali.collaboradmins.com (Postfix) with ESMTPSA id 7FBB317E065A; - Wed, 26 Feb 2025 19:45:07 +0100 (CET) -Received: by jupiter.universe (Postfix, from userid 1000) - id 37B6A480039; Wed, 26 Feb 2025 19:45:07 +0100 (CET) -From: Sebastian Reichel -To: Marek Vasut , u-boot@lists.denx.de, - Jonas Karlman , Soeren Moch -Cc: Tim Harvey , - Philipp Tomsich , - Anand Moon , Maxim Kiselev , - Sebastian Reichel -Subject: [PATCH v2 4/4] usb: tcpm: improve data role mismatch error recovery -Date: Wed, 26 Feb 2025 19:44:47 +0100 -Message-ID: <20250226184506.64114-5-sebastian.reichel@collabora.com> -X-Mailer: git-send-email 2.47.2 -In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com> -References: <20250226184506.64114-1-sebastian.reichel@collabora.com> -MIME-Version: 1.0 -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.39 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" -X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de -X-Virus-Status: Clean - -On Radxa ROCK 5B I managed to get U-Boot into an endless loop of -printing - -fusb302 usb-typec@22: TCPM: data role mismatch, initiating error recovery - -messages by changing the data role in Linux and then rebooting the -system. This is happening because the external device (A cheap USB-C hub -powered through a USB-C PD power-supply) kept its state and the error -recovery path for non self-powered devices is not enough to change it. - -Avoid this by swapping our own data role when the error recovery stage -is reached for a port, which is not self-powered. Right now data support -is limited anyways and once proper support is added we can use the data -role swap request to get the desired data direction after the initial -negotiation completed. - -Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework") -Signed-off-by: Sebastian Reichel ---- - drivers/usb/tcpm/tcpm.c | 30 +++++++++++++++++++++++++++--- - 1 file changed, 27 insertions(+), 3 deletions(-) - -diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c -index 909fe2ef4fcb..12d66d470f9a 100644 ---- a/drivers/usb/tcpm/tcpm.c -+++ b/drivers/usb/tcpm/tcpm.c -@@ -833,6 +833,28 @@ static void tcpm_pd_ctrl_request(struct udevice *dev, - } - } - -+static void tcpm_recover_data_role_mismatch(struct udevice *dev) -+{ -+ struct tcpm_port *port = dev_get_uclass_plat(dev); -+ -+ dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n"); -+ if (port->self_powered) { -+ tcpm_set_state(dev, ERROR_RECOVERY, 0); -+ return; -+ } -+ -+ /* -+ * The error recovery will not help for devices, which are not -+ * self-powered because the error recovery avoids killing the board -+ * power. Since this can happen early on sending -+ * a DR_SWAP request is not sensible. Instead let's change our own -+ * data role. It can be swapped back once USB-PD reached the ready -+ * state. -+ */ -+ tcpm_set_roles(dev, true, port->pwr_role, -+ port->data_role == TYPEC_HOST ? TYPEC_DEVICE : TYPEC_HOST); -+} -+ - static void tcpm_pd_rx_handler(struct udevice *dev, - const struct pd_message *msg) - { -@@ -867,9 +889,11 @@ static void tcpm_pd_rx_handler(struct udevice *dev, - remote_is_host = !!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE); - local_is_host = port->data_role == TYPEC_HOST; - if (remote_is_host == local_is_host) { -- dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n"); -- tcpm_set_state(dev, ERROR_RECOVERY, 0); -- } else { -+ tcpm_recover_data_role_mismatch(dev); -+ local_is_host = port->data_role == TYPEC_HOST; -+ } -+ -+ if (remote_is_host != local_is_host) { - if (cnt) - tcpm_pd_data_request(dev, msg); - else diff --git a/aarch64-boards b/aarch64-boards index 366d0c8..9e2fafa 100644 --- a/aarch64-boards +++ b/aarch64-boards @@ -1,23 +1,16 @@ a64-olinuxino -a64-olinuxino-emmc amarula_a64_relic -anbernic_rg35xx_h700 -apple_m1 bananapi_m2_plus_h5 bananapi_m64 beelink_gs1 dragonboard410c dragonboard820c -eaidk-610-rk3399 -emlid_neutis_n5_devboard -evb-px5 evb-rk3328 evb-rk3399 ficus-rk3399 firefly-rk3399 geekbox hikey -hmibsc khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 @@ -42,65 +35,48 @@ nanopi-m4-rk3399 nanopi_neo2 nanopi-neo4-rk3399 nanopi_neo_plus2 -nanopi_r1s_h5 -nanopi-r2c-plus-rk3328 -nanopi-r2c-rk3328 -nanopi-r2s-plus-rk3328 nanopi-r2s-rk3328 nanopi-r4s-rk3399 -oceanic_5205_5inmfd odroid-c2 orangepi_3 orangepi_lite2 orangepi_one_plus orangepi_pc2 orangepi_prime -orangepi-r1-plus-lts-rk3328 -orangepi-r1-plus-rk3328 orangepi-rk3399 orangepi_win orangepi_zero2 -orangepi_zero2w -orangepi_zero3 orangepi_zero_plus orangepi_zero_plus2 p212 p2371-2180 p2771-0000-500 +p3450-0000 pine64-lts pine64_plus pinebook pinebook-pro-rk3399 pine_h64 pinephone -pinephone-pro-rk3399 pinetab poplar puma-rk3399 -qcm6490 -qcom -qcom_qcs8300 -qcom_qcs9100 -qemu_arm64 -qemu_arm64_lwip roc-cc-rk3328 -rock-4c-plus-rk3399 -rock-4se-rk3399 rock64-rk3328 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-e-rk3328 -rock-pi-e-v3-rk3328 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399 +rpi_3 +rpi_4 rpi_arm64 sopine_baseboard tanix_tx6 teres_i -transpeed-8k618-t turris_mox vexpress_aemv8a_juno -x96_mate +xilinx_zynqmp_virt diff --git a/arm-boards b/arm-boards new file mode 100644 index 0000000..a6b85e5 --- /dev/null +++ b/arm-boards @@ -0,0 +1,141 @@ +A10-OLinuXino-Lime +A10s-OLinuXino-M +A13-OLinuXino +A13-OLinuXinoM +A20-Olimex-SOM-EVB +A20-OLinuXino-Lime +A20-OLinuXino-Lime2 +A20-OLinuXino_MICRO +am335x_evm +am57xx_evm +Ampe_A76 +apalis_imx6 +arndale +Auxtek-T003 +Auxtek-T004 +ba10_tv_box +Bananapi +bananapi_m1_plus +bananapi_m2_berry +Bananapi_m2m +bananapi_m2_plus_h3 +Bananapi_M2_Ultra +bananapi_m2_zero +Bananapro +chiliboard +CHIP +Chuwi_V7_CW0825 +clearfog +cm_fx6 +Colombus +colorfly_e708_q1 +CSQ_CS908 +Cubieboard +Cubieboard2 +Cubieboard4 +Cubietruck +Cubietruck_plus +db-mv784mp-gp +difrnce_dit4350 +dserve_dsrv9703c +evb-rk3229 +firefly-rk3288 +helios4 +Hummingbird_A31 +Hyundai_A7HD +i12-tvbox +icnova-a20-swac +inet1 +iNet_3F +iNet_3W +inet86dz +iNet_86VS +inet97fv2 +inet98v_rev2 +inet9f_rev03 +inet_q972 +Itead_Ibox_A20 +jesurun_q5 +jetson-tk1 +Lamobo_R1 +libretech_all_h3_cc_h2_plus +Linksprite_pcDuino +Linksprite_pcDuino3 +Linksprite_pcDuino3_Nano +liteboard +marsboard +Marsboard_A10 +Mele_A1000 +Mele_A1000G_quad +Mele_I7 +Mele_M3 +Mele_M5 +Mele_M9 +Mini-X +mk802 +mk802_a10s +mk802ii +MK808C +MSI_Primo73 +MSI_Primo81 +mx6cuboxi +nanopi_m1 +nanopi_m1_plus +nanopi_neo +novena +odroid +odroid-xu3 +omap3_beagle +omap4_panda +omap5_uevm +Orangepi +orangepi_2 +orangepi_lite +Orangepi_mini +orangepi_one +orangepi_pc +orangepi_pc_plus +orangepi_plus +orangepi_plus2e +orangepi_r1 +orangepi_zero +origen +paz00 +pinecube +polaroid_mid2809pxe04 +pov_protab2_ips9 +q8_a13_tablet +q8_a23_tablet_800x480 +q8_a33_tablet_1024x600 +q8_a33_tablet_800x480 +qemu_arm +r7-tv-dongle +riotboard +rock +rock2 +rock-pi-n8-rk3288 +rpi_2 +rpi_3_32b +rpi_4_32b +Sinlinx_SinA31s +Sinovoip_BPI_M2 +Sinovoip_BPI_M3 +stih410-b2260 +stm32mp15_basic +sunxi_Gemei_G9 +tbs_a711 +tinker-rk3288 +tinker-s-rk3288 +trimslice +turris_omnia +udoo +udoo_neo +usbarmory +UTOO_P66 +wandboard +warp7 +Wexler_TAB7200 +Wits_Pro_A20_DKT +xilinx_zynq_virt +Yones_Toptech_BS1078_V2 +zeropi diff --git a/disable-VBE-by-default.patch b/disable-VBE-by-default.patch deleted file mode 100644 index 1f1b710..0000000 --- a/disable-VBE-by-default.patch +++ /dev/null @@ -1,32 +0,0 @@ -From d9e3a49bc2a29922da5bddd95772279f6edba802 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Fri, 18 Aug 2023 13:28:05 +0100 -Subject: [PATCH] disable VBE by default - -The VBE protocol needs explicit device support and as -such isn't particularly useful by itself without that, -it also adds size and the potential of an attack vector -so devices that wish to use this protocol should -explicitly opt in to it like all other large features -in U-Boot. - -Signed-off-by: Peter Robinson ---- - boot/Kconfig | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/boot/Kconfig b/boot/Kconfig -index 30eb5b328d7..e8c3fbcb11d 100644 ---- a/boot/Kconfig -+++ b/boot/Kconfig -@@ -635,7 +635,6 @@ config BOOTMETH_QFW - config BOOTMETH_VBE - bool "Bootdev support for Verified Boot for Embedded" - depends on FIT -- default y - select BOOTMETH_GLOBAL - select EVENT - help --- -2.49.0 - diff --git a/dragonboard-fixes.patch b/dragonboard-fixes.patch new file mode 100644 index 0000000..c49ea50 --- /dev/null +++ b/dragonboard-fixes.patch @@ -0,0 +1,115 @@ +From 8b0274a733cd1ce39ad9ad18e1bd8efdd02a40b7 Mon Sep 17 00:00:00 2001 +From: Rob Clark +Date: Wed, 21 Jun 2017 14:21:15 -0400 +Subject: [PATCH 1/3] WIP: fix usb + +--- + common/usb_storage.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/common/usb_storage.c b/common/usb_storage.c +index d92ebb6eb19..9df3c3daaf4 100644 +--- a/common/usb_storage.c ++++ b/common/usb_storage.c +@@ -1016,7 +1016,7 @@ static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss) + + static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss) + { +- int retries = 10; ++ int retries = 20; + + do { + memset(&srb->cmd[0], 0, 12); +@@ -1039,7 +1039,7 @@ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss) + if ((srb->sense_buf[2] == 0x02) && + (srb->sense_buf[12] == 0x3a)) + return -1; +- mdelay(100); ++ mdelay(250); + } while (retries--); + + return -1; +-- +2.19.1 + +From 7bf41d74ca9d58bc2243b7688f8987c1d373ea56 Mon Sep 17 00:00:00 2001 +From: Rob Clark +Date: Mon, 3 Jul 2017 08:34:37 -0400 +Subject: [PATCH 2/3] HACK: disable emmc + +Hitting some timeout which makes boot take much longer. And +uefi/boot/rootfs partitions will be on sd-card or usb disk, etc, +so we can just ignore emmc. +--- + arch/arm/dts/dragonboard410c.dts | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts +index fa348bc621e..bfe7f15d5ed 100644 +--- a/arch/arm/dts/dragonboard410c.dts ++++ b/arch/arm/dts/dragonboard410c.dts +@@ -106,6 +106,7 @@ + #phy-cells = <0>; + }; + ++/* + sdhci@07824000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c 0x7824000 0x800>; +@@ -115,6 +116,7 @@ + clock = <&clkc 0>; + clock-frequency = <100000000>; + }; ++*/ + + sdhci@07864000 { + compatible = "qcom,sdhci-msm-v4"; +-- +2.19.1 + +From 871fe802cf3ab593b9332c4f36ab2b3f179d51ae Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Tue, 4 Sep 2018 12:21:59 +0100 +Subject: [PATCH 3/3] add options for dm410c config + +--- + configs/dragonboard410c_defconfig | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig +index a55abaf8df5..4ece0cafbe4 100644 +--- a/configs/dragonboard410c_defconfig ++++ b/configs/dragonboard410c_defconfig +@@ -7,6 +7,8 @@ CONFIG_NR_DRAM_BANKS=1 + # CONFIG_ANDROID_BOOT_IMAGE is not set + CONFIG_FIT=y + CONFIG_OF_BOARD_SETUP=y ++CONFIG_FAT_WRITE=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y + CONFIG_MISC_INIT_R=y + # CONFIG_DISPLAY_CPUINFO is not set + # CONFIG_DISPLAY_BOARDINFO is not set +@@ -41,6 +43,13 @@ CONFIG_DM_PMIC=y + CONFIG_PMIC_PM8916=y + CONFIG_MSM_SERIAL=y + CONFIG_SPMI_MSM=y ++CONFIG_DM_ETH=y ++CONFIG_DM_KEYBOARD=y ++CONFIG_DM_VIDEO=y ++# CONFG_VIDEO_BPP8 is not set ++CONFIG_NO_FB_CLEAR=y ++CONFIG_VIDEO_SIMPLE=y ++CONFIG_USB_KEYBOARD=y + CONFIG_USB=y + CONFIG_DM_USB=y + CONFIG_USB_EHCI_HCD=y +@@ -57,5 +66,6 @@ CONFIG_USB_HOST_ETHER=y + CONFIG_USB_ETHER_ASIX=y + CONFIG_USB_ETHER_ASIX88179=y + CONFIG_USB_ETHER_MCS7830=y ++CONFIG_USB_ETHER_RTL8152=y + CONFIG_USB_ETHER_SMSC95XX=y + CONFIG_OF_LIBFDT_OVERLAY=y +-- +2.19.1 + diff --git a/dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch b/dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch new file mode 100644 index 0000000..3ef5b53 --- /dev/null +++ b/dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch @@ -0,0 +1,115 @@ +From patchwork Mon Nov 1 04:43:47 2021 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Yifeng Zhao +X-Patchwork-Id: 1548950 +Return-Path: +X-Original-To: incoming@patchwork.ozlabs.org +Delivered-To: patchwork-incoming@bilbo.ozlabs.org +Authentication-Results: ozlabs.org; + spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de + (client-ip=85.214.62.61; helo=phobos.denx.de; + envelope-from=u-boot-bounces@lists.denx.de; receiver=) +Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) + (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) + key-exchange X25519 server-signature RSA-PSS (4096 bits)) + (No client certificate requested) + by bilbo.ozlabs.org (Postfix) with ESMTPS id 4HjL646Yhcz9sS8 + for ; Mon, 1 Nov 2021 15:44:12 +1100 (AEDT) +Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) + by phobos.denx.de (Postfix) with ESMTP id 6212783389; + Mon, 1 Nov 2021 05:44:06 +0100 (CET) +Authentication-Results: phobos.denx.de; + dmarc=none (p=none dis=none) header.from=rock-chips.com +Authentication-Results: phobos.denx.de; + spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de +Received: by phobos.denx.de (Postfix, from userid 109) + id 26A6483395; Mon, 1 Nov 2021 05:44:05 +0100 (CET) +X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de +X-Spam-Level: +X-Spam-Status: No, score=-0.4 required=5.0 tests=BAYES_00,RCVD_IN_SORBS_WEB, + SPF_HELO_NONE,T_SPF_PERMERROR autolearn=no autolearn_force=no + version=3.4.2 +Received: from lucky1.263xmail.com (lucky1.263xmail.com [211.157.147.134]) + (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) + (No client certificate requested) + by phobos.denx.de (Postfix) with ESMTPS id 04D7B83383 + for ; Mon, 1 Nov 2021 05:43:59 +0100 (CET) +Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) + header.from=rock-chips.com +Authentication-Results: phobos.denx.de; + spf=fail smtp.mailfrom=yifeng.zhao@rock-chips.com +Received: from localhost (unknown [192.168.167.16]) + by lucky1.263xmail.com (Postfix) with ESMTP id 1B96CD124A; + Mon, 1 Nov 2021 12:43:55 +0800 (CST) +X-MAIL-GRAY: 0 +X-MAIL-DELIVERY: 1 +X-ADDR-CHECKED4: 1 +X-SKE-CHECKED: 1 +X-ANTISPAM-LEVEL: 2 +Received: from localhost.localdomain (unknown [58.22.7.114]) + by smtp.263.net (postfix) whith ESMTP id + P5172T139932542678784S1635741828952225_; + Mon, 01 Nov 2021 12:43:55 +0800 (CST) +X-IP-DOMAINF: 1 +X-RL-SENDER: yifeng.zhao@rock-chips.com +X-SENDER: zyf@rock-chips.com +X-LOGIN-NAME: yifeng.zhao@rock-chips.com +X-FST-TO: kever.yang@rock-chips.com +X-RCPT-COUNT: 7 +X-LOCAL-RCPT-COUNT: 2 +X-SENDER-IP: 58.22.7.114 +X-ATTACHMENT-NUM: 0 +X-UNIQUE-TAG: <8beb59827f65d556787d36e0068aa9cb> +X-System-Flag: 0 +From: Yifeng Zhao +To: Kever Yang +Cc: sjg , Peter Robinson , + Philipp Tomsich , + u-boot@lists.denx.de, Jack Mitchell , + Yifeng Zhao +Subject: [PATCH] dts: rockchip: rk3399: enable emmc phy for spl +Date: Mon, 1 Nov 2021 12:43:47 +0800 +Message-Id: <20211101044347.17822-1-yifeng.zhao@rock-chips.com> +X-Mailer: git-send-email 2.17.1 +X-BeenThere: u-boot@lists.denx.de +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: U-Boot discussion +List-Unsubscribe: , + +List-Archive: +List-Post: +List-Help: +List-Subscribe: , + +Errors-To: u-boot-bounces@lists.denx.de +Sender: "U-Boot" +X-Virus-Scanned: clamav-milter 0.103.2 at phobos.denx.de +X-Virus-Status: Clean + +adapting commit ac804143cf ("mmc: rockchip_sdhci: add phy and clock +config for rk3399") to fix the issue "Not found emmc phy device". + +Signed-off-by: Yifeng Zhao +--- + + arch/arm/dts/rk3399-u-boot.dtsi | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi +index 73922c328a..716b9a433a 100644 +--- a/arch/arm/dts/rk3399-u-boot.dtsi ++++ b/arch/arm/dts/rk3399-u-boot.dtsi +@@ -88,6 +88,10 @@ + u-boot,dm-pre-reloc; + }; + ++&emmc_phy { ++ u-boot,dm-pre-reloc; ++}; ++ + &grf { + u-boot,dm-pre-reloc; + }; diff --git a/enable-bootmenu-by-default.patch b/enable-bootmenu-by-default.patch deleted file mode 100644 index 1ecd514..0000000 --- a/enable-bootmenu-by-default.patch +++ /dev/null @@ -1,49 +0,0 @@ -From a956480a6d52ae90ef4a46275c2ee29a4074de36 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Fri, 18 Aug 2023 23:10:42 +0100 -Subject: [PATCH] enable bootmenu by default - -We want the boot menu on all Fedora devices as it makes -it a whole lot more user friendly. - -Signed-off-by: Peter Robinson ---- - boot/Kconfig | 2 ++ - cmd/Kconfig | 1 + - 2 files changed, 3 insertions(+) - -diff --git a/boot/Kconfig b/boot/Kconfig -index 467b09e2350..ad67b1f65a6 100644 ---- a/boot/Kconfig -+++ b/boot/Kconfig -@@ -1281,6 +1281,7 @@ config BOOTDELAY - - config AUTOBOOT_KEYED - bool "Stop autobooting via specific input key / string" -+ default y - help - This option enables stopping (aborting) of the automatic - boot feature only by issuing a specific input key or -@@ -1433,6 +1434,7 @@ config AUTOBOOT_MENUKEY - - config AUTOBOOT_MENU_SHOW - bool "Show a menu on boot" -+ default y - depends on CMD_BOOTMENU - help - This enables the boot menu, controlled by environment variables -diff --git a/cmd/Kconfig b/cmd/Kconfig -index 43ca10f69cc..3d39f2914cc 100644 ---- a/cmd/Kconfig -+++ b/cmd/Kconfig -@@ -413,6 +413,7 @@ source lib/efi_selftest/Kconfig - - config CMD_BOOTMENU - bool "bootmenu" -+ default y - select MENU - select CHARSET - help --- -2.41.0 - diff --git a/p3450-fix-board.patch b/p3450-fix-board.patch deleted file mode 100644 index 74475d5..0000000 --- a/p3450-fix-board.patch +++ /dev/null @@ -1,25 +0,0 @@ -From c9b65320d64a60cde74c4c1f9cb4a05198a456c2 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Wed, 10 Sep 2025 13:27:52 +0100 -Subject: [PATCH] further size reductions - ---- - configs/p3450-0000_defconfig | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig -index 2ebcf8b83fc..a5e717a02ed 100644 ---- a/configs/p3450-0000_defconfig -+++ b/configs/p3450-0000_defconfig -@@ -27,6 +27,8 @@ CONFIG_CONSOLE_MUX=y - CONFIG_SYS_STDIO_DEREGISTER=y - CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # " - # CONFIG_BOOTM_PLAN9 is not set -+# CONFIG_SYS_DTC_PAD_BYTES is not set -+# CONFIG_LEGACY_IMAGE_FORMAT is not set - # CONFIG_BOOTM_RTEMS is not set - # CONFIG_BOOTM_VXWORKS is not set - # CONFIG_CMD_ELF is not set --- -2.51.0 - diff --git a/phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch b/phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch new file mode 100644 index 0000000..81f1cdb --- /dev/null +++ b/phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch @@ -0,0 +1,233 @@ +From patchwork Tue Apr 6 15:10:59 2021 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Icenowy Zheng +X-Patchwork-Id: 1462876 +Return-Path: +X-Original-To: incoming@patchwork.ozlabs.org +Delivered-To: patchwork-incoming@bilbo.ozlabs.org +Authentication-Results: ozlabs.org; + spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de + (client-ip=85.214.62.61; helo=phobos.denx.de; + envelope-from=u-boot-bounces@lists.denx.de; receiver=) +Authentication-Results: ozlabs.org; + dkim=fail reason="signature verification failed" (1024-bit key; + unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com + header.a=rsa-sha256 header.s=default header.b=unszVtqT; + dkim=fail reason="signature verification failed" (1024-bit key; + unprotected) header.d=aosc.io header.i=@aosc.io header.a=rsa-sha256 + header.s=default header.b=mWwYCh9A; + dkim-atps=neutral +Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) + (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) + key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest + SHA256) + (No client certificate requested) + by ozlabs.org (Postfix) with ESMTPS id 4FF9wc3GdNz9sW1 + for ; Wed, 7 Apr 2021 01:11:42 +1000 (AEST) +Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) + by phobos.denx.de (Postfix) with ESMTP id C1F9C8040A; + Tue, 6 Apr 2021 17:11:32 +0200 (CEST) +Authentication-Results: phobos.denx.de; + dmarc=none (p=none dis=none) header.from=aosc.io +Authentication-Results: phobos.denx.de; + spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de +Authentication-Results: phobos.denx.de; + dkim=fail reason="signature verification failed" (1024-bit key; + unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com + header.b="unszVtqT"; + dkim=fail reason="signature verification failed" (1024-bit key; + unprotected) header.d=aosc.io header.i=@aosc.io header.b="mWwYCh9A"; + dkim-atps=neutral +Received: by phobos.denx.de (Postfix, from userid 109) + id E4F22805B4; Tue, 6 Apr 2021 17:11:30 +0200 (CEST) +X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de +X-Spam-Level: +X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, + DKIM_VALID,DKIM_VALID_AU,SPF_HELO_NONE autolearn=ham + autolearn_force=no version=3.4.2 +Received: from relay3.mymailcheap.com (relay3.mymailcheap.com + [217.182.66.161]) + (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) + (No client certificate requested) + by phobos.denx.de (Postfix) with ESMTPS id 2FC4A8039D + for ; Tue, 6 Apr 2021 17:11:27 +0200 (CEST) +Authentication-Results: phobos.denx.de; + dmarc=none (p=none dis=none) header.from=aosc.io +Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=icenowy@aosc.io +Received: from filter2.mymailcheap.com (filter2.mymailcheap.com + [91.134.140.82]) + by relay3.mymailcheap.com (Postfix) with ESMTPS id A6AC13ECDF; + Tue, 6 Apr 2021 17:11:26 +0200 (CEST) +Received: from localhost (localhost [127.0.0.1]) + by filter2.mymailcheap.com (Postfix) with ESMTP id 88D512A915; + Tue, 6 Apr 2021 17:11:26 +0200 (CEST) +DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mymailcheap.com; + s=default; t=1617721886; + bh=qb5gt5o7M9qjdJd67A3WHGZp/76w4s4FS6+u1VuEh/o=; + h=From:To:Cc:Subject:Date:From; + b=unszVtqTnO9MGZVbgLH5H0cMo3VfQ+g5377blmOUcrtzMSqNbDD5SM25MUhlTUKiB + hTFq4L53gszBYfRPfh7Z5XgNVERULL5Zx0+WnVjZ7kUIp/wS3IQqxe81ChoFEsLTr8 + 22UB9NN3OSVkuN/jRAzX+lKpugVGBHwOCjZBZukQ= +Received: from filter2.mymailcheap.com ([127.0.0.1]) + by localhost (filter2.mymailcheap.com [127.0.0.1]) (amavisd-new, port 10024) + with ESMTP id V9lVOgo6gApH; Tue, 6 Apr 2021 17:11:25 +0200 (CEST) +Received: from mail20.mymailcheap.com (mail20.mymailcheap.com [51.83.111.147]) + (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) + (No client certificate requested) + by filter2.mymailcheap.com (Postfix) with ESMTPS; + Tue, 6 Apr 2021 17:11:25 +0200 (CEST) +Received: from [213.133.102.83] (ml.mymailcheap.com [213.133.102.83]) + by mail20.mymailcheap.com (Postfix) with ESMTP id C9EA3400B6; + Tue, 6 Apr 2021 15:11:24 +0000 (UTC) +Authentication-Results: mail20.mymailcheap.com; dkim=pass (1024-bit key; + unprotected) header.d=aosc.io header.i=@aosc.io header.b="mWwYCh9A"; + dkim-atps=neutral +AI-Spam-Status: Not processed +Received: from ice-e5v2.lan (unknown [59.41.163.135]) + (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) + key-exchange ECDHE (P-256) server-signature RSA-PSS (2048 bits) server-digest + SHA256) (No client certificate requested) + by mail20.mymailcheap.com (Postfix) with ESMTPSA id 251F840C16; + Tue, 6 Apr 2021 15:11:10 +0000 (UTC) +DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=aosc.io; s=default; + t=1617721874; bh=qb5gt5o7M9qjdJd67A3WHGZp/76w4s4FS6+u1VuEh/o=; + h=From:To:Cc:Subject:Date:From; + b=mWwYCh9AM8eRWm9hiEqirytotj/G/C1p9r2fd0zUxPhS0UQH+kw6L3RWZnsfmXAYq + HmYFiM3ktIfwevqQw89tOi8c2ktb49iYOyHXkfi8hTZl1dNsJDS94uyzBiHYY+U7x5 + P0aTRRaL5C8ua2c1GedoPx06nrARO/KMEFy39rxI= +From: Icenowy Zheng +To: Simon Glass , Kever Yang , + Frank Wang , + Jagan Teki +Cc: u-boot@lists.denx.de, + Icenowy Zheng +Subject: [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers + exit +Date: Tue, 6 Apr 2021 23:10:59 +0800 +Message-Id: <20210406151059.1187379-1-icenowy@aosc.io> +X-Mailer: git-send-email 2.30.2 +MIME-Version: 1.0 +X-Rspamd-Server: mail20.mymailcheap.com +X-Spamd-Result: default: False [4.90 / 20.00]; RCVD_VIA_SMTP_AUTH(0.00)[]; + ARC_NA(0.00)[]; R_DKIM_ALLOW(0.00)[aosc.io:s=default]; + RECEIVED_SPAMHAUS_PBL(0.00)[59.41.163.135:received]; + FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; + R_MISSING_CHARSET(2.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; + MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[aosc.io]; + BROKEN_CONTENT_TYPE(1.50)[]; R_SPF_SOFTFAIL(0.00)[~all]; + RCPT_COUNT_FIVE(0.00)[6]; ML_SERVERS(-3.10)[213.133.102.83]; + DKIM_TRACE(0.00)[aosc.io:+]; MID_CONTAINS_FROM(1.00)[]; + RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[]; + MIME_TRACE(0.00)[0:+]; + ASN(0.00)[asn:24940, ipnet:213.133.96.0/19, country:DE]; + RCVD_COUNT_TWO(0.00)[2]; + HFILTER_HELO_BAREIP(3.00)[213.133.102.83,1] +X-Rspamd-Queue-Id: C9EA3400B6 +X-BeenThere: u-boot@lists.denx.de +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: U-Boot discussion +List-Unsubscribe: , + +List-Archive: +List-Post: +List-Help: +List-Subscribe: , + +Errors-To: u-boot-bounces@lists.denx.de +Sender: "U-Boot" +X-Virus-Scanned: clamav-milter 0.102.4 at phobos.denx.de +X-Virus-Status: Clean + +The OHCI and EHCI controllers are both bound to the same PHY. They will +both do init and power_on operations when the controller is brought up +and both do power_off and exit when the controller is stopped. However, +the PHY uclass of U-Boot is not as sane as we thought -- they won't +maintain a status mark for PHYs, and thus the functions of the PHYs +could be called for multiple times. Calling init/power_on for multiple +times have no severe problems, however calling power_off/exit for +multiple times have a problem -- the first exit call will stop the PHY +clock, and power_off/exit calls after it still trying to write to PHY +registers. The write operation to PHY registers will fail because clock +is already stopped. + +Adapt the count mechanism from phy-sun4i-usb to both init/exit and +power_on/power_off functions to phy-rockchip-inno-usb2 to fix this +problem. With this stopping USB controllers (manually or before booting +a kernel) will work. + +Signed-off-by: Icenowy Zheng +Fixes: ac97a9ece14e ("phy: rockchip: Add Rockchip USB2PHY driver") +--- + drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 21 +++++++++++++++++++ + 1 file changed, 21 insertions(+) + +diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +index 62b8ba3a4a..be9cc99d90 100644 +--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c ++++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +@@ -62,6 +62,8 @@ struct rockchip_usb2phy { + void *reg_base; + struct clk phyclk; + const struct rockchip_usb2phy_cfg *phy_cfg; ++ int init_count; ++ int power_on_count; + }; + + static inline int property_enable(void *reg_base, +@@ -92,6 +94,10 @@ static int rockchip_usb2phy_power_on(struct phy *phy) + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + ++ priv->power_on_count++; ++ if (priv->power_on_count != 1) ++ return 0; ++ + property_enable(priv->reg_base, &port_cfg->phy_sus, false); + + /* waiting for the utmi_clk to become stable */ +@@ -106,6 +112,10 @@ static int rockchip_usb2phy_power_off(struct phy *phy) + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + ++ priv->power_on_count--; ++ if (priv->power_on_count != 0) ++ return 0; ++ + property_enable(priv->reg_base, &port_cfg->phy_sus, true); + + return 0; +@@ -118,6 +128,10 @@ static int rockchip_usb2phy_init(struct phy *phy) + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + int ret; + ++ priv->init_count++; ++ if (priv->init_count != 1) ++ return 0; ++ + ret = clk_enable(&priv->phyclk); + if (ret) { + dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret); +@@ -140,6 +154,10 @@ static int rockchip_usb2phy_exit(struct phy *phy) + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + ++ priv->init_count--; ++ if (priv->init_count != 0) ++ return 0; ++ + clk_disable(&priv->phyclk); + + return 0; +@@ -212,6 +230,9 @@ static int rockchip_usb2phy_probe(struct udevice *dev) + return ret; + } + ++ priv->power_on_count = 0; ++ priv->init_count = 0; ++ + return 0; + } + diff --git a/raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch b/raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch deleted file mode 100644 index d6612ee..0000000 --- a/raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 72fd4fdb54721a31d2b4e9f95fdd3b3e398bb2c0 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Sun, 12 Apr 2026 01:14:12 +0100 -Subject: [PATCH] board/raspberrypi: Add quirk for RPi5 2Gb rev 1.0 - -All 2Gb Raspberry Pi 5s use the BCM2712D0 silicon, but -the early boards were still rev 1.0 so we need a quirk -to ensure the correct device tree is used. - -Signed-off-by: Peter Robinson ---- - board/raspberrypi/rpi/rpi.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c -index b0a1484c0fa..ff9cab6521b 100644 ---- a/board/raspberrypi/rpi/rpi.c -+++ b/board/raspberrypi/rpi/rpi.c -@@ -371,6 +371,10 @@ static void set_fdtfile(void) - const char *fdtfile; - int rev = revision & 0x0f; - -+ /* 2GB Pi 5B board rev 1.0 always has BCM2712D0 silicon */ -+ if (revision == 0xb04170) -+ rev = 1; -+ - if (env_get("fdtfile")) - return; - --- -2.53.0 - diff --git a/riscv64-boards b/riscv64-boards deleted file mode 100644 index f96e775..0000000 --- a/riscv64-boards +++ /dev/null @@ -1,4 +0,0 @@ -qemu-riscv64_spl -sifive_unleashed -sifive_unmatched -starfive_visionfive2 diff --git a/rockchip-Enable-preboot-start-for-pci-usb.patch b/rockchip-Enable-preboot-start-for-pci-usb.patch deleted file mode 100644 index 30aad4d..0000000 --- a/rockchip-Enable-preboot-start-for-pci-usb.patch +++ /dev/null @@ -1,860 +0,0 @@ -From a6909a16b4cc301f1007d9e75d02abb6d06a1ea7 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Thu, 28 May 2026 21:29:29 +0100 -Subject: [PATCH] rockchip: Enable preboot start for pci/usb - -Enable the preboot so nvme works OOTB - -Signed-off-by: Peter Robinson ---- - configs/anbernic-rgxx3-rk3566_defconfig | 2 ++ - configs/bpi-r2-pro-rk3568_defconfig | 2 ++ - configs/cm3588-nas-rk3588_defconfig | 2 ++ - configs/coolpi-4b-rk3588s_defconfig | 2 ++ - configs/coolpi-cm5-evb-rk3588_defconfig | 2 ++ - configs/evb-rk3568_defconfig | 2 ++ - configs/evb-rk3588_defconfig | 2 ++ - configs/firefly-rk3399_defconfig | 2 ++ - configs/generic-rk3568_defconfig | 2 ++ - configs/generic-rk3588_defconfig | 2 ++ - configs/jaguar-rk3588_defconfig | 2 ++ - configs/lubancat-2-rk3568_defconfig | 2 ++ - configs/nanopc-t4-rk3399_defconfig | 2 ++ - configs/nanopc-t6-rk3588_defconfig | 2 ++ - configs/nanopi-r5c-rk3568_defconfig | 2 ++ - configs/nanopi-r5s-rk3568_defconfig | 2 ++ - configs/nanopi-r6c-rk3588s_defconfig | 2 ++ - configs/nanopi-r6s-rk3588s_defconfig | 2 ++ - configs/neu6a-io-rk3588_defconfig | 2 ++ - configs/neu6b-io-rk3588_defconfig | 2 ++ - configs/nova-rk3588s_defconfig | 2 ++ - configs/odroid-m1-rk3568_defconfig | 2 ++ - configs/odroid-m1s-rk3566_defconfig | 2 ++ - configs/odroid-m2-rk3588s_defconfig | 2 ++ - configs/orangepi-3b-rk3566_defconfig | 2 ++ - configs/orangepi-5-max-rk3588_defconfig | 2 ++ - configs/orangepi-5-plus-rk3588_defconfig | 2 ++ - configs/orangepi-5-rk3588s_defconfig | 2 ++ - configs/orangepi-5-ultra-rk3588_defconfig | 2 ++ - configs/pinebook-pro-rk3399_defconfig | 1 + - configs/pinetab2-rk3566_defconfig | 2 ++ - configs/powkiddy-x55-rk3566_defconfig | 2 ++ - configs/quartz64-a-rk3566_defconfig | 2 ++ - configs/quartz64-b-rk3566_defconfig | 4 ++++ - configs/quartzpro64-rk3588_defconfig | 2 ++ - configs/radxa-cm3-io-rk3566_defconfig | 2 ++ - configs/radxa-e25-rk3568_defconfig | 2 ++ - configs/radxa-zero-3-rk3566_defconfig | 2 ++ - configs/roc-pc-mezzanine-rk3399_defconfig | 2 ++ - configs/rock-3a-rk3568_defconfig | 2 ++ - configs/rock-3b-rk3568_defconfig | 2 ++ - configs/rock-3c-rk3566_defconfig | 2 ++ - configs/rock-4c-plus-rk3399_defconfig | 2 ++ - configs/rock-4se-rk3399_defconfig | 2 ++ - configs/rock-5-itx-rk3588_defconfig | 2 ++ - configs/rock-5c-rk3588s_defconfig | 2 ++ - configs/rock-pi-4-rk3399_defconfig | 2 ++ - configs/rock-pi-4c-rk3399_defconfig | 2 ++ - configs/rock-pi-n10-rk3399pro_defconfig | 2 ++ - configs/rock5a-rk3588s_defconfig | 2 ++ - configs/rock5b-rk3588_defconfig | 2 ++ - configs/rock960-rk3399_defconfig | 2 ++ - configs/rockpro64-rk3399_defconfig | 2 ++ - configs/sige7-rk3588_defconfig | 2 ++ - configs/soquartz-blade-rk3566_defconfig | 2 ++ - configs/soquartz-cm4-rk3566_defconfig | 2 ++ - configs/soquartz-model-a-rk3566_defconfig | 2 ++ - configs/tiger-rk3588_defconfig | 2 ++ - configs/toybrick-rk3588_defconfig | 2 ++ - configs/turing-rk1-rk3588_defconfig | 2 ++ - 60 files changed, 121 insertions(+) - -diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig -index 854de8b00a4..cd91f18ba80 100644 ---- a/configs/anbernic-rgxx3-rk3566_defconfig -+++ b/configs/anbernic-rgxx3-rk3566_defconfig -@@ -12,6 +12,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - # CONFIG_EFI_LOADER is not set - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y -diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig -index c5199a39448..603e07f2456 100644 ---- a/configs/bpi-r2-pro-rk3568_defconfig -+++ b/configs/bpi-r2-pro-rk3568_defconfig -@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/cm3588-nas-rk3588_defconfig b/configs/cm3588-nas-rk3588_defconfig -index 5b5ef8d5ac1..53147d115dd 100644 ---- a/configs/cm3588-nas-rk3588_defconfig -+++ b/configs/cm3588-nas-rk3588_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig -index e6772622403..75e0b373ce9 100644 ---- a/configs/coolpi-4b-rk3588s_defconfig -+++ b/configs/coolpi-4b-rk3588s_defconfig -@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/coolpi-cm5-evb-rk3588_defconfig b/configs/coolpi-cm5-evb-rk3588_defconfig -index 4326e116849..a005e4441d3 100644 ---- a/configs/coolpi-cm5-evb-rk3588_defconfig -+++ b/configs/coolpi-cm5-evb-rk3588_defconfig -@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig -index 4a5a7454e10..7ec199a08af 100644 ---- a/configs/evb-rk3568_defconfig -+++ b/configs/evb-rk3568_defconfig -@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig -index c7f6256a626..cfa73c660e7 100644 ---- a/configs/evb-rk3588_defconfig -+++ b/configs/evb-rk3588_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig -index 83b9de5feb9..2ba8f5029c3 100644 ---- a/configs/firefly-rk3399_defconfig -+++ b/configs/firefly-rk3399_defconfig -@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb" - CONFIG_DISPLAY_BOARDINFO_LATE=y - CONFIG_SPL_MAX_SIZE=0x40000 -diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig -index a33c3af9255..20966793568 100644 ---- a/configs/generic-rk3568_defconfig -+++ b/configs/generic-rk3568_defconfig -@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig -index ac450e6d757..b5424ac9f16 100644 ---- a/configs/generic-rk3588_defconfig -+++ b/configs/generic-rk3588_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig -index ed3883b4f9c..47dbd834f30 100644 ---- a/configs/jaguar-rk3588_defconfig -+++ b/configs/jaguar-rk3588_defconfig -@@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_BASE=0xfeb50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig -index 7548bf60b06..2fb8a432503 100644 ---- a/configs/lubancat-2-rk3568_defconfig -+++ b/configs/lubancat-2-rk3568_defconfig -@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_EFI_VAR_BUF_SIZE=16384 - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y -diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig -index f8ae436a1ee..7aa8e1a8d42 100644 ---- a/configs/nanopc-t4-rk3399_defconfig -+++ b/configs/nanopc-t4-rk3399_defconfig -@@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" - CONFIG_DISPLAY_BOARDINFO_LATE=y - CONFIG_SPL_MAX_SIZE=0x40000 -diff --git a/configs/nanopc-t6-rk3588_defconfig b/configs/nanopc-t6-rk3588_defconfig -index ba9a5adece7..eaf7fa5a0fc 100644 ---- a/configs/nanopc-t6-rk3588_defconfig -+++ b/configs/nanopc-t6-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig -index e75a24dadc8..159ef033932 100644 ---- a/configs/nanopi-r5c-rk3568_defconfig -+++ b/configs/nanopi-r5c-rk3568_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="usb start;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig -index c971f376b38..60b5e8fa014 100644 ---- a/configs/nanopi-r5s-rk3568_defconfig -+++ b/configs/nanopi-r5s-rk3568_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="usb start;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/nanopi-r6c-rk3588s_defconfig b/configs/nanopi-r6c-rk3588s_defconfig -index 861e3234d29..bb6e2082e3b 100644 ---- a/configs/nanopi-r6c-rk3588s_defconfig -+++ b/configs/nanopi-r6c-rk3588s_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/nanopi-r6s-rk3588s_defconfig b/configs/nanopi-r6s-rk3588s_defconfig -index 743dfca441b..903ec56ad6f 100644 ---- a/configs/nanopi-r6s-rk3588s_defconfig -+++ b/configs/nanopi-r6s-rk3588s_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/neu6a-io-rk3588_defconfig b/configs/neu6a-io-rk3588_defconfig -index 19f129e96f0..08ed699b01d 100644 ---- a/configs/neu6a-io-rk3588_defconfig -+++ b/configs/neu6a-io-rk3588_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/neu6b-io-rk3588_defconfig b/configs/neu6b-io-rk3588_defconfig -index 2cf5aeccf51..8cafd779a1c 100644 ---- a/configs/neu6b-io-rk3588_defconfig -+++ b/configs/neu6b-io-rk3588_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/nova-rk3588s_defconfig b/configs/nova-rk3588s_defconfig -index f7d7492ff46..5abb6ebbe18 100644 ---- a/configs/nova-rk3588s_defconfig -+++ b/configs/nova-rk3588s_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig -index b00985b0405..19d7af53c7f 100644 ---- a/configs/odroid-m1-rk3568_defconfig -+++ b/configs/odroid-m1-rk3568_defconfig -@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/odroid-m1s-rk3566_defconfig b/configs/odroid-m1s-rk3566_defconfig -index d59882a2a59..20f6dc3c26e 100644 ---- a/configs/odroid-m1s-rk3566_defconfig -+++ b/configs/odroid-m1s-rk3566_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/odroid-m2-rk3588s_defconfig b/configs/odroid-m2-rk3588s_defconfig -index e71e61ddb0b..561c2b28b7a 100644 ---- a/configs/odroid-m2-rk3588s_defconfig -+++ b/configs/odroid-m2-rk3588s_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/orangepi-3b-rk3566_defconfig b/configs/orangepi-3b-rk3566_defconfig -index 1cd78789fa1..dcf182231da 100644 ---- a/configs/orangepi-3b-rk3566_defconfig -+++ b/configs/orangepi-3b-rk3566_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/orangepi-5-max-rk3588_defconfig b/configs/orangepi-5-max-rk3588_defconfig -index 0861df962cf..744aad89c4a 100644 ---- a/configs/orangepi-5-max-rk3588_defconfig -+++ b/configs/orangepi-5-max-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/orangepi-5-plus-rk3588_defconfig b/configs/orangepi-5-plus-rk3588_defconfig -index 52523f87aec..e3bb4e43da9 100644 ---- a/configs/orangepi-5-plus-rk3588_defconfig -+++ b/configs/orangepi-5-plus-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/orangepi-5-rk3588s_defconfig b/configs/orangepi-5-rk3588s_defconfig -index e0eba389289..33fe68add7b 100644 ---- a/configs/orangepi-5-rk3588s_defconfig -+++ b/configs/orangepi-5-rk3588s_defconfig -@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/orangepi-5-ultra-rk3588_defconfig b/configs/orangepi-5-ultra-rk3588_defconfig -index fb7f4432983..62419609695 100644 ---- a/configs/orangepi-5-ultra-rk3588_defconfig -+++ b/configs/orangepi-5-ultra-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig -index cbf95b4692f..9e4d1b1061d 100644 ---- a/configs/pinebook-pro-rk3399_defconfig -+++ b/configs/pinebook-pro-rk3399_defconfig -@@ -22,6 +22,7 @@ CONFIG_PCI=y - CONFIG_DEBUG_UART=y - CONFIG_BOOTDELAY=3 - CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb" - CONFIG_DISPLAY_BOARDINFO_LATE=y - CONFIG_SPL_MAX_SIZE=0x40000 -diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig -index f284dadb99d..d87849f0a45 100644 ---- a/configs/pinetab2-rk3566_defconfig -+++ b/configs/pinetab2-rk3566_defconfig -@@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/powkiddy-x55-rk3566_defconfig b/configs/powkiddy-x55-rk3566_defconfig -index 37a359c91a9..70bc5ab6402 100644 ---- a/configs/powkiddy-x55-rk3566_defconfig -+++ b/configs/powkiddy-x55-rk3566_defconfig -@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig -index 780fd581f0a..7938b5c0d1b 100644 ---- a/configs/quartz64-a-rk3566_defconfig -+++ b/configs/quartz64-a-rk3566_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig -index 4d92a67cd73..fe8a168373d 100644 ---- a/configs/quartz64-b-rk3566_defconfig -+++ b/configs/quartz64-b-rk3566_defconfig -@@ -1,4 +1,6 @@ - CONFIG_ARM=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_SKIP_LOWLEVEL_INIT=y - CONFIG_COUNTER_FREQUENCY=24000000 - CONFIG_ARCH_ROCKCHIP=y -@@ -17,6 +19,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/quartzpro64-rk3588_defconfig b/configs/quartzpro64-rk3588_defconfig -index 0ad74e8bbef..b9cbddfae77 100644 ---- a/configs/quartzpro64-rk3588_defconfig -+++ b/configs/quartzpro64-rk3588_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig -index 875f0b76fa5..2523dccd6a3 100644 ---- a/configs/radxa-cm3-io-rk3566_defconfig -+++ b/configs/radxa-cm3-io-rk3566_defconfig -@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig -index 779d540e22d..7e003e74520 100644 ---- a/configs/radxa-e25-rk3568_defconfig -+++ b/configs/radxa-e25-rk3568_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/radxa-zero-3-rk3566_defconfig b/configs/radxa-zero-3-rk3566_defconfig -index f5cf09a5e4a..7db7e3fcd3d 100644 ---- a/configs/radxa-zero-3-rk3566_defconfig -+++ b/configs/radxa-zero-3-rk3566_defconfig -@@ -11,6 +11,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig -index 8b4d8c1b0aa..54baa07aeae 100644 ---- a/configs/roc-pc-mezzanine-rk3399_defconfig -+++ b/configs/roc-pc-mezzanine-rk3399_defconfig -@@ -21,6 +21,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - # CONFIG_ANDROID_BOOT_IMAGE is not set - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" - CONFIG_DISPLAY_BOARDINFO_LATE=y -diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig -index e753185610f..19d303e7f70 100644 ---- a/configs/rock-3a-rk3568_defconfig -+++ b/configs/rock-3a-rk3568_defconfig -@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock-3b-rk3568_defconfig b/configs/rock-3b-rk3568_defconfig -index c3bf48b9e34..0cfa8eba168 100644 ---- a/configs/rock-3b-rk3568_defconfig -+++ b/configs/rock-3b-rk3568_defconfig -@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig -index 417aa33a663..61d0e1b8c6a 100644 ---- a/configs/rock-3c-rk3566_defconfig -+++ b/configs/rock-3c-rk3566_defconfig -@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock-4c-plus-rk3399_defconfig b/configs/rock-4c-plus-rk3399_defconfig -index 0f6bdfdfb06..f31cb061a83 100644 ---- a/configs/rock-4c-plus-rk3399_defconfig -+++ b/configs/rock-4c-plus-rk3399_defconfig -@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_EFI_CAPSULE_ON_DISK=y - CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y - # CONFIG_ANDROID_BOOT_IMAGE is not set -diff --git a/configs/rock-4se-rk3399_defconfig b/configs/rock-4se-rk3399_defconfig -index 7f22aede912..caf8e02bece 100644 ---- a/configs/rock-4se-rk3399_defconfig -+++ b/configs/rock-4se-rk3399_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_EFI_CAPSULE_ON_DISK=y - CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y - # CONFIG_ANDROID_BOOT_IMAGE is not set -diff --git a/configs/rock-5-itx-rk3588_defconfig b/configs/rock-5-itx-rk3588_defconfig -index cb014de4188..e26a126533c 100644 ---- a/configs/rock-5-itx-rk3588_defconfig -+++ b/configs/rock-5-itx-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock-5c-rk3588s_defconfig b/configs/rock-5c-rk3588s_defconfig -index 3d044a81498..27234c250d1 100644 ---- a/configs/rock-5c-rk3588s_defconfig -+++ b/configs/rock-5c-rk3588s_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig -index e5c9072c27f..35852c017da 100644 ---- a/configs/rock-pi-4-rk3399_defconfig -+++ b/configs/rock-pi-4-rk3399_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_EFI_CAPSULE_ON_DISK=y - CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y - # CONFIG_ANDROID_BOOT_IMAGE is not set -diff --git a/configs/rock-pi-4c-rk3399_defconfig b/configs/rock-pi-4c-rk3399_defconfig -index 4be7b0f8130..eeee446a5bd 100644 ---- a/configs/rock-pi-4c-rk3399_defconfig -+++ b/configs/rock-pi-4c-rk3399_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_EFI_CAPSULE_ON_DISK=y - CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y - # CONFIG_ANDROID_BOOT_IMAGE is not set -diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig -index 602a723ea7d..3dcc2932ae3 100644 ---- a/configs/rock-pi-n10-rk3399pro_defconfig -+++ b/configs/rock-pi-n10-rk3399pro_defconfig -@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - # CONFIG_ANDROID_BOOT_IMAGE is not set - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb" - # CONFIG_CONSOLE_MUX is not set -diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig -index 24b2eef35f2..c5830054921 100644 ---- a/configs/rock5a-rk3588s_defconfig -+++ b/configs/rock5a-rk3588s_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig -index da5fb3a2c30..053346fc035 100644 ---- a/configs/rock5b-rk3588_defconfig -+++ b/configs/rock5b-rk3588_defconfig -@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig -index db121f03ae6..e55f1b6a034 100644 ---- a/configs/rock960-rk3399_defconfig -+++ b/configs/rock960-rk3399_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb" - CONFIG_SYS_PBSIZE=1052 - CONFIG_DISPLAY_BOARDINFO_LATE=y -diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig -index 1d2bff35fc0..ea8e90b9f6a 100644 ---- a/configs/rockpro64-rk3399_defconfig -+++ b/configs/rockpro64-rk3399_defconfig -@@ -20,6 +20,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" - CONFIG_DISPLAY_BOARDINFO_LATE=y - CONFIG_SPL_MAX_SIZE=0x40000 -diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig -index 00b9759715b..1b837bd554c 100644 ---- a/configs/sige7-rk3588_defconfig -+++ b/configs/sige7-rk3588_defconfig -@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_SPL_SPI=y - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig -index 7de159a8881..4137f0459b5 100644 ---- a/configs/soquartz-blade-rk3566_defconfig -+++ b/configs/soquartz-blade-rk3566_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig -index 4455ee5b5aa..ad63ba0204f 100644 ---- a/configs/soquartz-cm4-rk3566_defconfig -+++ b/configs/soquartz-cm4-rk3566_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig -index abdab514496..9e01345bdaa 100644 ---- a/configs/soquartz-model-a-rk3566_defconfig -+++ b/configs/soquartz-model-a-rk3566_defconfig -@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig -index 105e8e10e0b..bcc2ae302a5 100644 ---- a/configs/tiger-rk3588_defconfig -+++ b/configs/tiger-rk3588_defconfig -@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 - # CONFIG_DEBUG_UART_BOARD_INIT is not set - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig -index 14b231ae3e2..7af393731cd 100644 ---- a/configs/toybrick-rk3588_defconfig -+++ b/configs/toybrick-rk3588_defconfig -@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800 - CONFIG_DEBUG_UART_BASE=0xFEB50000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y -diff --git a/configs/turing-rk1-rk3588_defconfig b/configs/turing-rk1-rk3588_defconfig -index 0b3efec23e6..515db2a2b0c 100644 ---- a/configs/turing-rk1-rk3588_defconfig -+++ b/configs/turing-rk1-rk3588_defconfig -@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEBC0000 - CONFIG_DEBUG_UART_CLOCK=24000000 - CONFIG_PCI=y - CONFIG_DEBUG_UART=y -+CONFIG_USE_PREBOOT=y -+CONFIG_PREBOOT="pci enum; usb start; nvme scan;" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y - CONFIG_SPL_FIT_SIGNATURE=y --- -2.54.0 - diff --git a/rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch b/rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch deleted file mode 100644 index bef5a9e..0000000 --- a/rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch +++ /dev/null @@ -1,39 +0,0 @@ -From aef38432fbc93621b434836b95b10c28aa880e84 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Tue, 9 Dec 2025 20:51:06 +0000 -Subject: [PATCH 1/2] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci - -The pinctrl settings are now upstream, with the upstream -voltage supplies, and the HS200 mode is confirmed to work -fine but the HS400 mode had reported issues so let's just -consume what the upstream DT has now as it's all known good. - -Reported-by: Dusty Mabe -Tested-by: Dusty Mabe -Signed-off-by: Peter Robinson ---- - arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 8 -------- - 1 file changed, 8 deletions(-) - -diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi -index 64c43374c04..7e24be1a5e7 100644 ---- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi -+++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi -@@ -12,14 +12,6 @@ - /delete-property/ vpcie3v3-supply; - }; - --&sdhci { -- cap-mmc-highspeed; -- mmc-hs200-1_8v; -- mmc-hs400-1_8v; -- mmc-hs400-enhanced-strobe; -- pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; --}; -- - &vcc5v0_usb_host { - /delete-property/ regulator-always-on; - /delete-property/ regulator-boot-on; --- -2.52.0 - diff --git a/rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch b/rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch deleted file mode 100644 index c67e4af..0000000 --- a/rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 29efc0396809384cf37bfcfb01c62e63216fa998 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Tue, 9 Dec 2025 21:13:46 +0000 -Subject: [PATCH 2/2] rockchip: rk356x: Stop overriding sdhci/mmc aliases - -Upstream device tree has rules where the aliases are board -specific settings, no SoC settings. Looking at upstream -rk356x boards there's a lot of variation in the setting of -mmc0/mmc1 based on the device so we should not be overriding -this here and now we sync to upstream we should just consume -those settings, to do otherwise confuses users. - -Signed-off-by: Peter Robinson ---- - arch/arm/dts/rk356x-u-boot.dtsi | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi -index 738b9673d35..f25c7970208 100644 ---- a/arch/arm/dts/rk356x-u-boot.dtsi -+++ b/arch/arm/dts/rk356x-u-boot.dtsi -@@ -7,8 +7,6 @@ - - / { - aliases { -- mmc0 = &sdhci; -- mmc1 = &sdmmc0; - spi4 = &sfc; - }; - --- -2.52.0 - diff --git a/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch b/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch new file mode 100644 index 0000000..c156e4d --- /dev/null +++ b/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch @@ -0,0 +1,96 @@ +From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Mon, 10 Aug 2020 22:20:29 +0100 +Subject: [PATCH] rpi: Use firmware provided device tree + +Signed-off-by: Peter Robinson +--- + configs/rpi_0_w_defconfig | 2 +- + configs/rpi_2_defconfig | 2 +- + configs/rpi_3_32b_defconfig | 2 +- + configs/rpi_3_b_plus_defconfig | 2 +- + configs/rpi_3_defconfig | 2 +- + configs/rpi_defconfig | 2 +- + 6 files changed, 6 insertions(+), 6 deletions(-) + +diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig +index bba5e12b12..0241f4c6d3 100644 +--- a/configs/rpi_0_w_defconfig ++++ b/configs/rpi_0_w_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig +index 1c2bbb29ce..9573e475f4 100644 +--- a/configs/rpi_2_defconfig ++++ b/configs/rpi_2_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig +index b8a3d17f43..252df994e6 100644 +--- a/configs/rpi_3_32b_defconfig ++++ b/configs/rpi_3_32b_defconfig +@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig +index 4c361438fa..3b2996a2f9 100644 +--- a/configs/rpi_3_b_plus_defconfig ++++ b/configs/rpi_3_b_plus_defconfig +@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig +index 9b281a4f15..1e9ee6122e 100644 +--- a/configs/rpi_3_defconfig ++++ b/configs/rpi_3_defconfig +@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig +index b5ad53c37b..223fc03275 100644 +--- a/configs/rpi_defconfig ++++ b/configs/rpi_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" + CONFIG_SYS_RELOC_GD_ENV_ADDR=y + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +-- +2.26.2 + diff --git a/rpi-bcm2835_sdhost-firmware-managed-clock.patch b/rpi-bcm2835_sdhost-firmware-managed-clock.patch new file mode 100644 index 0000000..d1c60e8 --- /dev/null +++ b/rpi-bcm2835_sdhost-firmware-managed-clock.patch @@ -0,0 +1,228 @@ +From f3a870bfa075fb880f5e018a0a5ae6f27ca8be49 Mon Sep 17 00:00:00 2001 +From: Vincent Fazio +Date: Mon, 13 Sep 2021 13:34:45 -0500 +Subject: [PATCH] mmc: bcm2835-host: let firmware manage the clock + +Newer firmware supports managing the sdhost clock divisor, so leverage +this feature if it is available. + +SET_SDHOST_CLOCK is largely undocumented except for its usage within the +Linux kernel, which this change is based on. + +https://github.com/raspberrypi/linux/commit/3cd16c39c718e2dda7885c4ed7a20118aed12524 + +Signed-off-by: Vincent Fazio +--- + arch/arm/mach-bcm283x/include/mach/mbox.h | 18 ++++++++ + arch/arm/mach-bcm283x/include/mach/msg.h | 10 +++++ + arch/arm/mach-bcm283x/msg.c | 30 +++++++++++++ + drivers/mmc/bcm2835_sdhost.c | 53 ++++++++++++++--------- + 4 files changed, 90 insertions(+), 21 deletions(-) + +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h +index 7dcac583cc4..9b1943fcfc4 100644 +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h +@@ -252,6 +252,24 @@ struct bcm2835_mbox_tag_get_clock_rate { + } body; + }; + ++#define BCM2835_MBOX_TAG_SET_SDHOST_CLOCK 0x00038042 ++ ++struct bcm2835_mbox_tag_set_sdhost_clock { ++ struct bcm2835_mbox_tag_hdr tag_hdr; ++ union { ++ struct { ++ u32 rate_hz; ++ u32 rate_1; ++ u32 rate_2; ++ } req; ++ struct { ++ u32 rate_hz; ++ u32 rate_1; ++ u32 rate_2; ++ } resp; ++ } body; ++}; ++ + #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001 + + struct bcm2835_mbox_tag_allocate_buffer { +diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h +index e45c1bf010f..ab37abdb6c6 100644 +--- a/arch/arm/mach-bcm283x/include/mach/msg.h ++++ b/arch/arm/mach-bcm283x/include/mach/msg.h +@@ -22,6 +22,16 @@ int bcm2835_power_on_module(u32 module); + */ + int bcm2835_get_mmc_clock(u32 clock_id); + ++/** ++ * bcm2835_set_sdhost_clock() - determine if firmware controls sdhost cdiv ++ * ++ * @rate_hz: Input clock frequency ++ * @rate_1: Returns a clock frequency ++ * @rate_2: Returns a clock frequency ++ * @return 0 of OK, -EIO on error ++ */ ++int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2); ++ + /** + * bcm2835_get_video_size() - get the current display size + * +diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c +index e2badfecb09..8c1c36a5f15 100644 +--- a/arch/arm/mach-bcm283x/msg.c ++++ b/arch/arm/mach-bcm283x/msg.c +@@ -21,6 +21,12 @@ struct msg_get_clock_rate { + u32 end_tag; + }; + ++struct msg_set_sdhost_clock { ++ struct bcm2835_mbox_hdr hdr; ++ struct bcm2835_mbox_tag_set_sdhost_clock set_sdhost_clock; ++ u32 end_tag; ++}; ++ + struct msg_query { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_physical_w_h physical_w_h; +@@ -111,6 +117,30 @@ int bcm2835_get_mmc_clock(u32 clock_id) + return clock_rate; + } + ++int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2) ++{ ++ ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_sdhost_clock, msg_sdhost_clk, 1); ++ int ret; ++ ++ BCM2835_MBOX_INIT_HDR(msg_sdhost_clk); ++ BCM2835_MBOX_INIT_TAG(&msg_sdhost_clk->set_sdhost_clock, SET_SDHOST_CLOCK); ++ ++ msg_sdhost_clk->set_sdhost_clock.body.req.rate_hz = rate_hz; ++ msg_sdhost_clk->set_sdhost_clock.body.req.rate_1 = *rate_1; ++ msg_sdhost_clk->set_sdhost_clock.body.req.rate_2 = *rate_2; ++ ++ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_sdhost_clk->hdr); ++ if (ret) { ++ printf("bcm2835: Could not query sdhost clock rate\n"); ++ return -EIO; ++ } ++ ++ *rate_1 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_1; ++ *rate_2 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_2; ++ ++ return 0; ++} ++ + int bcm2835_get_video_size(int *widthp, int *heightp) + { + ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1); +diff --git a/drivers/mmc/bcm2835_sdhost.c b/drivers/mmc/bcm2835_sdhost.c +index 894dbdd6861..3a9cd6f1eb2 100644 +--- a/drivers/mmc/bcm2835_sdhost.c ++++ b/drivers/mmc/bcm2835_sdhost.c +@@ -181,6 +181,7 @@ struct bcm2835_host { + struct udevice *dev; + struct mmc *mmc; + struct bcm2835_plat *plat; ++ unsigned int firmware_sets_cdiv:1; + }; + + static void bcm2835_dumpregs(struct bcm2835_host *host) +@@ -233,7 +234,7 @@ static void bcm2835_reset_internal(struct bcm2835_host *host) + msleep(20); + host->clock = 0; + writel(host->hcfg, host->ioaddr + SDHCFG); +- writel(host->cdiv, host->ioaddr + SDCDIV); ++ writel(SDCDIV_MAX_CDIV, host->ioaddr + SDCDIV); + } + + static int bcm2835_wait_transfer_complete(struct bcm2835_host *host) +@@ -598,6 +599,7 @@ static int bcm2835_transmit(struct bcm2835_host *host) + static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) + { + int div; ++ u32 clock_rate[2] = { 0 }; + + /* The SDCDIV register has 11 bits, and holds (div - 2). But + * in data mode the max is 50MHz wihout a minimum, and only +@@ -620,26 +622,34 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) + * clock divisor at all times. + */ + +- if (clock < 100000) { +- /* Can't stop the clock, but make it as slow as possible +- * to show willing +- */ +- host->cdiv = SDCDIV_MAX_CDIV; +- writel(host->cdiv, host->ioaddr + SDCDIV); +- return; +- } ++ if (host->firmware_sets_cdiv) { ++ bcm2835_set_sdhost_clock(clock, &clock_rate[0], &clock_rate[1]); ++ clock = max(clock_rate[0], clock_rate[1]); ++ } else { ++ if (clock < 100000) { ++ /* Can't stop the clock, but make it as slow as possible ++ * to show willing ++ */ ++ host->cdiv = SDCDIV_MAX_CDIV; ++ writel(host->cdiv, host->ioaddr + SDCDIV); ++ return; ++ } + +- div = host->max_clk / clock; +- if (div < 2) +- div = 2; +- if ((host->max_clk / div) > clock) +- div++; +- div -= 2; ++ div = host->max_clk / clock; ++ if (div < 2) ++ div = 2; ++ if ((host->max_clk / div) > clock) ++ div++; ++ div -= 2; + +- if (div > SDCDIV_MAX_CDIV) +- div = SDCDIV_MAX_CDIV; ++ if (div > SDCDIV_MAX_CDIV) ++ div = SDCDIV_MAX_CDIV; ++ ++ clock = host->max_clk / (div + 2); ++ host->cdiv = div; ++ writel(host->cdiv, host->ioaddr + SDCDIV); ++ } + +- clock = host->max_clk / (div + 2); + host->mmc->clock = clock; + + /* Calibrate some delays */ +@@ -647,9 +657,6 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) + host->ns_per_fifo_word = (1000000000 / clock) * + ((host->mmc->card_caps & MMC_MODE_4BIT) ? 8 : 32); + +- host->cdiv = div; +- writel(host->cdiv, host->ioaddr + SDCDIV); +- + /* Set the timeout to 500ms */ + writel(host->mmc->clock / 2, host->ioaddr + SDTOUT); + } +@@ -759,6 +766,7 @@ static int bcm2835_probe(struct udevice *dev) + struct bcm2835_host *host = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); ++ u32 clock_rate[2] = { ~0 }; + + host->dev = dev; + host->mmc = mmc; +@@ -776,6 +784,9 @@ static int bcm2835_probe(struct udevice *dev) + + host->max_clk = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_CORE); + ++ bcm2835_set_sdhost_clock(0, &clock_rate[0], &clock_rate[1]); ++ host->firmware_sets_cdiv = (clock_rate[0] != ~0); ++ + bcm2835_add_host(host); + + dev_dbg(dev, "%s -> OK\n", __func__); diff --git a/rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch b/rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch deleted file mode 100644 index 6d54fa7..0000000 --- a/rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch +++ /dev/null @@ -1,256 +0,0 @@ -From patchwork Tue Aug 4 13:39:15 2026 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Gregor Herburger -X-Patchwork-Id: 2280865 -X-Patchwork-Delegate: pbrobinson@gmail.com -Return-Path: -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@legolas.ozlabs.org -Authentication-Results: legolas.ozlabs.org; - dkim=fail reason="signature verification failed" (2048-bit key; - unprotected) header.d=lists.u-boot-project.org - header.i=@lists.u-boot-project.org header.a=rsa-sha256 header.s=default - header.b=DFFhfbAr; - dkim-atps=neutral -Authentication-Results: legolas.ozlabs.org; - spf=pass (sender SPF authorized) smtp.mailfrom=lists.u-boot-project.org - (client-ip=2605:bc80:3010::136; helo=smtp3.osuosl.org; - envelope-from=u-boot-bounces@lists.u-boot-project.org; - receiver=patchwork.ozlabs.org) -Received: from smtp3.osuosl.org (smtp3.osuosl.org [IPv6:2605:bc80:3010::136]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384) - (No client certificate requested) - by legolas.ozlabs.org (Postfix) with ESMTPS id 4hDvm8025rz1xqD - for ; Tue, 04 Aug 2026 23:39:35 +1000 (AEST) -Received: from localhost (localhost [127.0.0.1]) - by smtp3.osuosl.org (Postfix) with ESMTP id 2536960600; - Tue, 4 Aug 2026 13:39:34 +0000 (UTC) -X-Virus-Scanned: amavis at osuosl.org -Received: from smtp3.osuosl.org ([127.0.0.1]) - by localhost (smtp3.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP - id T9Kb3BtsvOX4; Tue, 4 Aug 2026 13:39:33 +0000 (UTC) -X-Comment: SPF check N/A for local connections - client-ip=140.211.166.142; - helo=lists1.osuosl.org; - envelope-from=u-boot-bounces@lists.u-boot-project.org; receiver= -DKIM-Filter: OpenDKIM Filter v2.11.0 smtp3.osuosl.org 4350560615 -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; - d=lists.u-boot-project.org ; s=default; t=1785850773; - bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=; - h=From:Date:Subject:To:Cc:List-Id:List-Unsubscribe:List-Archive: - List-Post:List-Help:List-Subscribe:From; - b=DFFhfbArDuHrxJEuZryw3QEVVVcavwAril7tcxulQVs6jkVOCAjh7GEuhkq8EyLIq - suopR14b5dkKpVbbSr23u2v9jRgpynJQ5WBq6kIJSqjmZt58tZeMbaX76PRHjOs8+s - QHatP0Vxf1ny0BOpVlZLZ/LlAsQhypNhW6/qjH0X9OLeNq0IFjSZ5faD3z463b62m0 - yMuPrAXa/kuPPInxGG6HsCPkRzFH3x9hM15r7ipSbXODTRXaVBSVScp03eAeo6zw/d - nll/wcjCEe/78XX5o1Tsug951g7H8meDRnGQHJZtvbEmHdDB1wkTXYdFI2EGwnDxsz - W3dcHoUveJgqQ== -Received: from lists1.osuosl.org (lists1.osuosl.org [140.211.166.142]) - by smtp3.osuosl.org (Postfix) with ESMTP id 4350560615; - Tue, 4 Aug 2026 13:39:33 +0000 (UTC) -X-Original-To: u-boot@lists.u-boot-project.org -Delivered-To: u-boot@lists.u-boot-project.org -Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138]) - by lists1.osuosl.org (Postfix) with ESMTP id 3009E2BF - for ; Tue, 4 Aug 2026 13:39:31 +0000 (UTC) -Received: from localhost (localhost [127.0.0.1]) - by smtp1.osuosl.org (Postfix) with ESMTP id 222DC8086C - for ; Tue, 4 Aug 2026 13:39:31 +0000 (UTC) -X-Virus-Scanned: amavis at osuosl.org -Received: from smtp1.osuosl.org ([127.0.0.1]) - by localhost (smtp1.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP - id W5OoNRat257d for ; - Tue, 4 Aug 2026 13:39:30 +0000 (UTC) -X-Greylist: delayed 94239 seconds by postgrey-1.37 at util1.osuosl.org; - Tue, 04 Aug 2026 13:39:29 UTC -DMARC-Filter: OpenDMARC Filter v1.4.2 smtp1.osuosl.org 1B0B580827 -DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org 1B0B580827 -Received-SPF: Pass (mailfrom) identity=mailfrom; - client-ip=2a0a:51c0:0:12e:550::1; helo=galois.linutronix.de; - envelope-from=gregor.herburger@linutronix.de; receiver= -Received: from galois.linutronix.de (Galois.linutronix.de - [IPv6:2a0a:51c0:0:12e:550::1]) - by smtp1.osuosl.org (Postfix) with ESMTPS id 1B0B580827 - for ; Tue, 4 Aug 2026 13:39:29 +0000 (UTC) -From: Gregor Herburger -Date: Tue, 04 Aug 2026 15:39:15 +0200 -Subject: [PATCH v3] rpi: copy /chosen/bootloader partition and set - boot_partition -MIME-Version: 1.0 -Message-Id: <20260804-tryboot2-v3-1-b0bc282a923b@linutronix.de> -X-B4-Tracking: v=1; b=H4sIAILrcWoC/22OywrCMBBFf0WyNpKHbYor/0O6SNOJjWgiSRpaS - v/dpCKCyKwO3HvmLiiANxDQabcgD8kE42wGvt8hNUh7BWz6zIgRVpOGcBz93DkXGW5UxRjlooZ - Kohx/etBm2lSX9s1h7G6gYumXhPbugePgQX6VgjQfJU4U5+OSHiVIpQU9340do3fWTIceimIwI - To/b3MTK6/+LEssezhRRFDNAGj142nXdX0BG/Mh6/kAAAA= -X-Change-ID: 20260803-tryboot2-8c5221376e5a -To: u-boot@lists.u-boot-project.org -Cc: Matthias Brugger , - Peter Robinson , Tom Rini , - =?utf-8?q?Filip_Kokosi=C5=84ski?= , - Ilias Apalodimas , - Gregor Herburger -X-Developer-Signature: v=1; a=ed25519-sha256; t=1785850764; l=3191; - i=gregor.herburger@linutronix.de; s=20260226; h=from:subject:message-id; - bh=4mVT/kFDHBnjUUlqljWBZ+t7aLa+t+gE+t/hUJ4uc5g=; - b=TBKoGScdkXGUfpGLvpVtYHkg4LDoOR/8M/do2dqU2QlR+9Z9YFNN6x88pDC7UIDeXrJS+Hpeg - e3YsfK6fOcoBgXOuzz3Aabmmn9//OQN7WG6Vz15rSxX0uVZ96TFcvf5 -X-Developer-Key: i=gregor.herburger@linutronix.de; a=ed25519; - pk=u72Lv7+/lS5CC1hmSrb17lv/6CK7HBh4Lvz77PHA5LM= -X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; - d=linutronix.de; s=2020; t=1785850765; - h=from:from:reply-to:subject:subject:date:date:message-id:message-id: - to:to:cc:cc:mime-version:mime-version:content-type:content-type: - content-transfer-encoding:content-transfer-encoding; - bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=; - b=plU5oAFojHvTlDhOGINsdXnnc0AnS9OY0C4LB9dSy9uyrPKBBpLWGWj3xmNoX87lLZlhO9 - z0H+R5gqw5NfxbTVYFHqZnW+pW4xJQFW9fMYSU8/k2RRg9JEqP+NrZ8Y720ujlycxn05vP - sF7cD+TEsxvyBhnbRyq82obvpdQIYj0D6T3UkHyz0U4G+5k8dVhhv/mqGaSfY8xW4cCl5G - gIE2QIsuzB4g4pQoW70DrLd7cyqqDM0iDrrXFZL2a7DlnYgbe1ULVXMl05UMMQGfBkHmog - pt8e+zvO4AVA3G8CKcUQhhWOZm7uycUpdrNuyPKg9K7JB6MEd9dHbucVa+v8Yg== -X-Mailman-Original-DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed; - d=linutronix.de; s=2020e; t=1785850765; - h=from:from:reply-to:subject:subject:date:date:message-id:message-id: - to:to:cc:cc:mime-version:mime-version:content-type:content-type: - content-transfer-encoding:content-transfer-encoding; - bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=; - b=NAMrZHs0ETYIMiwBHLvCoR3NOcg/kwkAxVRq6Q/pdhfkQJjxtHU3mZFV520QjbE1yeix0S - nJyAqHgyKVlRiZCw== -X-Mailman-Original-Authentication-Results: smtp1.osuosl.org; - dmarc=pass (p=none dis=none) - header.from=linutronix.de -X-Mailman-Original-Authentication-Results: smtp1.osuosl.org; - dkim=pass (2048-bit key, unprotected) header.d=linutronix.de - header.i=@linutronix.de header.a=rsa-sha256 header.s=2020 header.b=plU5oAFo; - dkim=pass header.d=linutronix.de header.i=@linutronix.de - header.a=ed25519-sha256 header.s=2020e header.b=NAMrZHs0 -X-BeenThere: u-boot@lists.u-boot-project.org -X-Mailman-Version: 2.1.30 -Precedence: list -List-Id: U-Boot discussion -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Errors-To: u-boot-bounces@lists.u-boot-project.org -Sender: "U-Boot" - -The Raspberry Pi has the "tryboot" feature where it can boot from a -different partition enabling failsafe A/B updates. After boot the -firmware sets 'partition' property in /chosen/bootloader. - -Copy the /chosen/bootloader node to the device tree. - -Set the env variable boot_partition accordingly to allow boards to -create a bootcmd based on the boot partition. - -Reviewed-by: Matthias Brugger -Signed-off-by: Gregor Herburger ---- -Changes in v3: -- Copy the complete '/chosen/bootloader' node instead of only the - partition property -- Link to v2: https://patch.msgid.link/20260803-tryboot2-v2-1-30c071f2ee15@linutronix.de - -Changes in v2: -- update Reviewed-by tag ---- - board/raspberrypi/rpi/rpi.c | 51 +++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 51 insertions(+) - - ---- -base-commit: baa64b2f892890f00a377eac4a3e685472bb56b5 -change-id: 20260803-tryboot2-8c5221376e5a - -Best regards, --- -Gregor Herburger - -diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c -index 1da5df92351c..ba8a2c1ba4cf 100644 ---- a/board/raspberrypi/rpi/rpi.c -+++ b/board/raspberrypi/rpi/rpi.c -@@ -480,6 +480,20 @@ static void set_serial_number(void) - env_set("serial#", serial_string); - } - -+static void set_boot_partition_fdt(void) -+{ -+ void *fdtp = (void *)gd->fdt_blob; -+ u32 partition; -+ -+ partition = fdt_getprop_u32_default(fdtp, "/chosen/bootloader", "partition", 1); -+ if (!partition) { -+ printf("Failed to the get partition property.\n"); -+ return; -+ } -+ -+ env_set_ulong("boot_partition", partition); -+} -+ - int misc_init_r(void) - { - set_fdt_addr(); -@@ -489,6 +503,7 @@ int misc_init_r(void) - set_board_info(); - #endif - set_serial_number(); -+ set_boot_partition_fdt(); - - return 0; - } -@@ -579,6 +594,39 @@ int board_fdt_blob_setup(void **fdtp) - return 0; - } - -+int copy_node_all_properties(void *dst, void *src, const char *path, const char *node) -+{ -+ int src_parent, dst_parent; -+ int src_node, dst_node; -+ int prop; -+ int len; -+ -+ src_parent = fdt_path_offset(src, path); -+ dst_parent = fdt_path_offset(dst, path); -+ if (src_parent < 0 || dst_parent < 0) -+ return -1; -+ -+ src_node = fdt_subnode_offset(src, src_parent, node); -+ if (src_node < 0) -+ return -1; -+ -+ dst_node = fdt_find_or_add_subnode(dst, dst_parent, node); -+ if (dst_node < 0) -+ return -1; -+ -+ fdt_for_each_property_offset(prop, src, src_node) { -+ const char *name; -+ const void *value = fdt_getprop_by_offset(src, prop, &name, &len); -+ -+ if (!value || !name) -+ continue; -+ -+ fdt_setprop(dst, dst_node, name, value, len); -+ } -+ -+ return 0; -+} -+ - int copy_property(void *dst, void *src, char *path, char *property) - { - int dst_offset, src_offset; -@@ -641,6 +689,9 @@ void update_fdt_from_fw(void *fdt, void *fw_fdt) - - /* copy uart clk as provided by the firmware */ - copy_property(fdt, fw_fdt, "/clocks/clk-uart", "clock-frequency"); -+ -+ /* Copy the bootloader node */ -+ copy_node_all_properties(fdt, fw_fdt, "/chosen", "bootloader"); - } - - int ft_board_setup(void *blob, struct bd_info *bd) diff --git a/rpi-fallback-to-max-clock-for-mmc.patch b/rpi-fallback-to-max-clock-for-mmc.patch new file mode 100644 index 0000000..81ee372 --- /dev/null +++ b/rpi-fallback-to-max-clock-for-mmc.patch @@ -0,0 +1,77 @@ +From 71ba043e5c5575f3d86536acade70dab6599489b Mon Sep 17 00:00:00 2001 +From: Vincent Fazio +Date: Mon, 13 Sep 2021 11:22:30 -0500 +Subject: [PATCH] arm: rpi: fallback to max clock rate for MMC clock + +In rpi-firmware 25e2b597ebfb2495eab4816a276758dcc6ea21f1 and later, +the GET_CLOCK_RATE mailbox property was changed to return the last +value set by SET_CLOCK_RATE. + +https://github.com/raspberrypi/firmware/issues/1619#issuecomment-917025502 + +U-Boot does not call SET_CLOCK_RATE so bcm2835_get_mmc_clock will +return zero and can cause degraded MMC performance. + +Calling SET_CLOCK_RATE fixes the frequency of the clock to a specific +value and disables the firmware's clock scaling so is not an option. + +Instead, fallback to GET_MAX_CLOCK_RATE in bcm2835_get_mmc_clock if +GET_CLOCK_RATE returns zero. + +Signed-off-by: Vincent Fazio +--- + arch/arm/mach-bcm283x/include/mach/mbox.h | 2 ++ + arch/arm/mach-bcm283x/msg.c | 20 +++++++++++++++++++- + 2 files changed, 21 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h +index 2ae2d3d97c3..7dcac583cc4 100644 +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h +@@ -224,6 +224,8 @@ struct bcm2835_mbox_tag_set_power_state { + }; + + #define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002 ++#define BCM2835_MBOX_TAG_GET_MAX_CLOCK_RATE 0x00030004 ++#define BCM2835_MBOX_TAG_GET_MIN_CLOCK_RATE 0x00030007 + + #define BCM2835_MBOX_CLOCK_ID_EMMC 1 + #define BCM2835_MBOX_CLOCK_ID_UART 2 +diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c +index 347aece3cd8..e2badfecb09 100644 +--- a/arch/arm/mach-bcm283x/msg.c ++++ b/arch/arm/mach-bcm283x/msg.c +@@ -75,6 +75,7 @@ int bcm2835_get_mmc_clock(u32 clock_id) + { + ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1); + int ret; ++ u32 clock_rate = 0; + + ret = bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI); + if (ret) +@@ -90,7 +91,24 @@ int bcm2835_get_mmc_clock(u32 clock_id) + return -EIO; + } + +- return msg_clk->get_clock_rate.body.resp.rate_hz; ++ clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz; ++ ++ if (clock_rate == 0) ++ { ++ BCM2835_MBOX_INIT_HDR(msg_clk); ++ BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_MAX_CLOCK_RATE); ++ msg_clk->get_clock_rate.body.req.clock_id = clock_id; ++ ++ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr); ++ if (ret) { ++ printf("bcm2835: Could not query max eMMC clock rate\n"); ++ return -EIO; ++ } ++ ++ clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz; ++ } ++ ++ return clock_rate; + } + + int bcm2835_get_video_size(int *widthp, int *heightp) diff --git a/sources b/sources index 08618e7..f64b4ca 100644 --- a/sources +++ b/sources @@ -1 +1 @@ -SHA512 (u-boot-v2026.10-rc3.tar.bz2) = e993f5d78a1ac0eb11f00e3730ff23eb880e206036f78c3eb74852b846a23d59111b4b07f4ced2c88c61a8c1627036c3cc32717c0efcf819376c5cd0a34183d2 +SHA512 (u-boot-2021.10.tar.bz2) = be5be1c9a54b270307a04177d5577a21c57a02b307bf8b63d0fa2655d1f025c7ce010dca6a1f7f60d4e639c2e6fb6f0a292a2e5d190f1fad478eb12dd786c9da diff --git a/uboot-tools.spec b/uboot-tools.spec index 056cc94..d77e112 100644 --- a/uboot-tools.spec +++ b/uboot-tools.spec @@ -1,90 +1,59 @@ -%global candidate rc3 -%if 0%{?rhel} -%bcond_with toolsonly -%else -%bcond_without toolsonly -%endif - -# Set it to "opensbi" (stable) or "opensbi-unstable" (unstable, git) -%global opensbi opensbi +#global candidate rc5 Name: uboot-tools -Version: 2026.10 -Release: 0.3%{?candidate:.%{candidate}}%{?dist} -Epoch: 1 +Version: 2021.10 +Release: 3%{?candidate:.%{candidate}}%{?dist} Summary: U-Boot utilities -# Automatically converted from old format: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ - review is highly recommended. -License: GPL-2.0-or-later AND LicenseRef-Callaway-BSD AND LGPL-2.1-or-later AND LGPL-2.0-or-later -URL: https://u-boot-project.org/ +License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ +URL: http://www.denx.de/wiki/U-Boot + ExcludeArch: s390x -Source0: https://git.u-boot-project.org/u-boot/u-boot/-/archive/v%{version}%{?candidate:-%{candidate}}/u-boot-v%{version}%{?candidate:-%{candidate}}.tar.bz2 -Source1: aarch64-boards -Source2: riscv64-boards -Source3: x86_64-boards +Source0: https://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2 +Source1: arm-boards +Source2: aarch64-boards -# Fedora patches to enable/disable features -Patch1: disable-VBE-by-default.patch -Patch2: enable-bootmenu-by-default.patch -# This is now legacy, most devices use bootflow, we keep this for the laggards -Patch3: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch -# Identify VFAT partitions as ESP, allows EFI setvar on our images -Patch4: uefi-Add-all-options-for-EFI-System-Partitions.patch -# New function to find fdt for loading from disk -Patch5: uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch -# Enable UEFI SetVariable for devices without backed storage -Patch6: uefi-enable-SetVariableRT-with-volotile-storage.patch -# Enable UEFI HTTPS boot for all Fedora firmware -Patch7: uefi-enable-https-boot-by-default.patch - -# Device improvments -# USB-PD improvements -Patch10: USB-PD-TCPM-improvements.patch +# Fedoraisms patches +# Needed to find DT on boot partition that's not the first partition +Patch1: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch +# Board fixes and enablement +# RPi - uses RPI firmware device tree for HAT support +Patch2: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch +Patch3: rpi-fallback-to-max-clock-for-mmc.patch +Patch4: rpi-bcm2835_sdhost-firmware-managed-clock.patch +# AllWinner improvements +Patch10: AllWinner-PineTab.patch +# TI fixes +Patch11: 0001-Fix-BeagleAI-detection.patch # Rockchips improvements -Patch11: rockchip-Enable-preboot-start-for-pci-usb.patch -Patch13: rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch -# Jetson fixes -Patch14: p3450-fix-board.patch -Patch15: JetsonTX2-Fix-upstream-device-tree-naming.patch -# Fix AllWinner -Patch16: Allwinner-fix-booting-on-a-number-of-devices.patch -# RPi -Patch20: Fix-NVMe-not-only-on-Raspberry-Pi-5.patch -Patch21: raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch -Patch22: rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch +Patch12: phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch +Patch13: 0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch +Patch14: 0001-enable-hs400-and-sdma-support.patch +Patch15: dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch BuildRequires: bc -BuildRequires: bison BuildRequires: dtc -BuildRequires: flex -BuildRequires: gcc -BuildRequires: gnutls-devel -BuildRequires: libuuid-devel BuildRequires: make -BuildRequires: ncurses-devel -%if 0%{?fedora} > 44 -BuildRequires: openssl3-devel -BuildRequires: openssl3-devel-engine -%else -BuildRequires: openssl-devel -BuildRequires: openssl-devel-engine -%endif BuildRequires: perl-interpreter +# Requirements for building on el7 +%if 0%{?rhel} == 7 +BuildRequires: devtoolset-7-build +BuildRequires: devtoolset-7-binutils +BuildRequires: devtoolset-7-gcc +BuildRequires: python2-devel +BuildRequires: python2-setuptools +BuildRequires: python2-libfdt +%else +BuildRequires: gcc BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: python3-libfdt -BuildRequires: SDL2-devel +%endif +BuildRequires: flex bison +BuildRequires: openssl-devel +BuildRequires: SDL-devel BuildRequires: swig -%if %{with toolsonly} %ifarch aarch64 BuildRequires: arm-trusted-firmware-armv8 -BuildRequires: optee-os-firmware-armv8 -BuildRequires: crust-firmware -BuildRequires: python3-pyelftools -BuildRequires: xxd -%endif -%ifarch riscv64 -BuildRequires: %{opensbi} -%endif %endif Requires: dtc @@ -92,7 +61,6 @@ Requires: dtc This package contains a few U-Boot utilities - mkimage for creating boot images and fw_printenv/fw_setenv for manipulating the boot environment variables. -%if %{with toolsonly} %ifarch aarch64 %package -n uboot-images-armv8 Summary: U-Boot firmware images for aarch64 boards @@ -102,101 +70,86 @@ BuildArch: noarch U-Boot firmware binaries for aarch64 boards %endif -%ifarch riscv64 -%package -n uboot-images-riscv64 -Summary: U-Boot firmware images for riscv64 boards +%ifarch %{arm} +%package -n uboot-images-armv7 +Summary: U-Boot firmware images for armv7 boards BuildArch: noarch -%description -n uboot-images-riscv64 -U-Boot firmware binaries for riscv64 boards -%endif - -%ifarch x86_64 -%package -n uboot-images-x86_64 -Summary: U-Boot firmware images for x86_64 boards -BuildArch: noarch - -%description -n uboot-images-x86_64 -U-Boot firmware binaries for x86_64 boards -%endif +%description -n uboot-images-armv7 +U-Boot firmware binaries for armv7 boards %endif %prep -%autosetup -p1 -n u-boot-v%{version}%{?candidate:-%{candidate}} +%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}} -cp %SOURCE1 %SOURCE2 %SOURCE3 . +cp %SOURCE1 %SOURCE2 . %build mkdir builds +%if 0%{?rhel} == 7 +#Enabling DTS for .el7 +%{?enable_devtoolset7:%{enable_devtoolset7}} +%endif + %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/ %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/ -%if %{with toolsonly} -# OpenSBI firmware is distributed in U-Boot SPL images -%ifarch riscv64 -export OPENSBI=%{_datadir}/%{opensbi}/generic/firmware/fw_dynamic.bin -%endif +# U-Boot device firmwares don't currently support LTO +%define _lto_cflags %{nil} -%ifarch aarch64 riscv64 x86_64 +%ifarch aarch64 %{arm} for board in $(cat %{_arch}-boards) do echo "Building board: $board" mkdir builds/$(echo $board)/ # ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome - sun50i=(a64-olinuxino a64-olinuxino-emmc amarula_a64_relic bananapi_m64 nanopi_a64 oceanic_5205_5inmfd orangepi_win pine64-lts pine64_plus pine64_plus pinebook pinephone pinephone pinetab sopine_baseboard teres_i) + sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i) if [[ " ${sun50i[*]} " == *" $board "* ]]; then echo "Board: $board using sun50i_a64" - cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31 - cp /usr/share/crust-firmware/a64/scp.bin builds/$(echo $board)/ + cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/ fi - sun50h5=(bananapi_m2_plus_h5 emlid_neutis_n5_devboard libretech_all_h3_cc_h5 libretech_all_h3_it_h5 libretech_all_h5_cc_h5 nanopi_neo2 nanopi_neo_plus2 nanopi_r1s_h5 orangepi_pc2 orangepi_prime orangepi_zero_plus2 orangepi_zero_plus) - if [[ " ${sun50h5[*]} " == *" $board "* ]]; then - echo "Board: $board using sun50i_h6" - cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31 - cp /usr/share/crust-firmware/h5/scp.bin builds/$(echo $board)/ - fi - sun50h6=(beelink_gs1 emlid_neutis_n5_devboard orangepi_3 orangepi_lite2 orangepi_one_plus pine_h64 tanix_tx6) + sun50h6=(beelink_gs1 orangepi_3 orangepi_lite2 orangepi_one_plus orangepi_zero2 pine_h64 tanix_tx6) if [[ " ${sun50h6[*]} " == *" $board "* ]]; then echo "Board: $board using sun50i_h6" - cp /usr/share/arm-trusted-firmware/sun50i_h6/bl31.bin builds/$(echo $board)/atf-bl31 - cp /usr/share/crust-firmware/h6/scp.bin builds/$(echo $board)/ + cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/ fi - sun50i_h616=(anbernic_rg35xx_h700 orangepi_zero2 orangepi_zero2w orangepi_zero3 transpeed-8k618-t x96_mate) - if [[ " ${sun50i_h616[*]} " == *" $board "* ]]; then - echo "Board: $board using sun50i_h616" - cp /usr/share/arm-trusted-firmware/sun50i_h616/bl31.bin builds/$(echo $board)/atf-bl31 - fi - rk3328=(evb-rk3328 generic-rk3328 nanopi-r2c-plus-rk3328 nanopi-r2c-rk3328 nanopi-r2s-rk3328 nanopi-r2s-plus-rk3328 orangepi-r1-plus-lts-rk3328 orangepi-r1-plus-rk3328 roc-cc-rk3328 rock64-rk3328 rock-pi-e-rk3328 rock-pi-e-v3-rk3328) + rk3328=(evb-rk3328 nanopi-r2s-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328) if [[ " ${rk3328[*]} " == *" $board "* ]]; then echo "Board: $board using rk3328" - cp /usr/share/arm-trusted-firmware/rk3328/bl31.elf builds/$(echo $board)/atf-bl31 + cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/ fi - rk3368=(evb-px5 geekbox) - if [[ " ${rk3368[*]} " == *" $board "* ]]; then - echo "Board: $board using rk3368" - cp /usr/share/arm-trusted-firmware/rk3368/bl31.elf builds/$(echo $board)/atf-bl31 - fi - rk3399=(eaidk-610-rk3399 evb-rk3399 ficus-rk3399 firefly-rk3399 generic-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 pinephone-pro-rk3399 puma-rk3399 rock-4c-plus-rk3399 rock-4se-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399) + rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399) if [[ " ${rk3399[*]} " == *" $board "* ]]; then echo "Board: $board using rk3399" cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/ - cp builds/$(echo $board)/bl31.elf builds/$(echo $board)/atf-bl31 - fi - zynqmp=(xilinx_zynqmp_kria xilinx_zynqmp_virt) - if [[ " ${zynqmp[*]} " == *" $board "* ]]; then - echo "Board: $board using zynqmp" - cp /usr/share/arm-trusted-firmware/zynqmp/bl31.bin builds/$(echo $board)/atf-bl31 fi # End ATF make $(echo $board)_defconfig O=builds/$(echo $board)/ - BL31=builds/$(echo $board)/atf-bl31 %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/ + %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/ + # build spi images for rockchip boards with SPI flash + rkspi=(evb-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 pinebook-pro-rk3399 rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399) + if [[ " ${rkspi[*]} " == *" $board "* ]]; then + echo "Board: $board with SPI flash" + builds/$(echo $board)/tools/mkimage -n rk3399 -T rkspi -d builds/$(echo $board)/tpl/u-boot-tpl.bin:builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/idbloader.spi + fi + # build spi, and uart images for mvebu boards + # mvebu=(clearfog helios4 turris_omnia) + if [[ " ${mvebu[*]} " == *" $board "* ]]; then + for target in spi uart + do + echo "Board: $board Target: $target" + sed -i -e '/CONFIG_MVEBU_SPL_BOOT_DEVICE_/d' configs/$(echo $board)_defconfig + echo CONFIG_MVEBU_SPL_BOOT_DEVICE_${target^^}=y >> configs/$(echo $board)_defconfig + make $(echo $board)_defconfig O=builds/$(echo $board-$target)/ + %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board-$target)/ + done + fi done -%endif %endif %install @@ -204,370 +157,322 @@ mkdir -p %{buildroot}%{_bindir} mkdir -p %{buildroot}%{_mandir}/man1 mkdir -p %{buildroot}%{_datadir}/uboot/ -%if %{with toolsonly} %ifarch aarch64 for board in $(ls builds) do - for file in u-boot.bin u-boot.img u-boot-dtb.img u-boot-sunxi-with-spl.bin u-boot-rockchip-spi.bin u-boot-rockchip.bin + mkdir -p %{buildroot}%{_datadir}/uboot/$(echo $board)/ + for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img idbloader.spi spl/boot.bin spl/sunxi-spl.bin do if [ -f builds/$(echo $board)/$(echo $file) ]; then - install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file) - fi - done -done - -# Just for xilinx_zynqmp -for board in "xilinx_zynqmp_kria xilinx_zynqmp_virt" -do - for file in u-boot.itb spl/boot.bin - do - if [ -f builds/$(echo $board)/$(echo $file) ]; then - install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file) - fi - done -done - -# For Apple M-series we also need the nodtb variant -install -pD -m 0644 builds/apple_m1/u-boot-nodtb.bin %{buildroot}%{_datadir}/uboot/apple_m1/u-boot-nodtb.bin -%endif - -%ifarch riscv64 -for board in $(ls builds) -do - for file in u-boot.itb spl/u-boot-spl.bin spl/u-boot-spl.bin.normal.out - do - if [ -f builds/$(echo $board)/$(echo $file) ]; then - install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file) + install -p -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/ fi done done %endif -%ifarch x86_64 +%ifarch %{arm} for board in $(ls builds) do - for file in u-boot.rom + mkdir -p %{buildroot}%{_datadir}/uboot/$(echo $board)/ + for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-rockchip.bin u-boot-sunxi-with-spl.bin spl/boot.bin do if [ -f builds/$(echo $board)/$(echo $file) ]; then - install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file) + install -p -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/ fi done done %endif # Bit of a hack to remove binaries we don't use as they're large +%ifarch aarch64 %{arm} for board in $(ls builds) do rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.dtb if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.* fi - if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-rockchip.bin ]; then - rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.* + if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/MLO ]; then + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin + fi + if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/SPL ]; then + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin + fi + if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin + fi + if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.kwb ]; then + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.* + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.bin + fi + if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/idbloader.img ]; then + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin + rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.img fi done %endif -for tool in dumpimage env/fw_printenv fdt_add_pubkey fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc ifwitool img2srec kwboot mkeficapsule mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder +for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes kwboot do install -p -m 0755 builds/tools/$tool %{buildroot}%{_bindir} done -for tool in dumpimage kwboot mkeficapsule mkimage -do -install -p -m 0644 doc/$tool.1 %{buildroot}%{_mandir}/man1 -done +install -p -m 0644 doc/mkimage.1 %{buildroot}%{_mandir}/man1 install -p -m 0755 builds/tools/env/fw_printenv %{buildroot}%{_bindir} ( cd %{buildroot}%{_bindir}; ln -sf fw_printenv fw_setenv ) +# Copy some useful docs over +mkdir -p builds/docs +cp -p board/hisilicon/hikey/README builds/docs/README.hikey +cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820 +cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399 +cp -p board/solidrun/clearfog/README builds/docs/README.clearfog +cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi +cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64 +cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand +cp -p board/ti/am335x/README builds/docs/README.am335x +cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm +cp -p board/udoo/README builds/docs/README.udoo +cp -p board/wandboard/README builds/docs/README.wandboard +cp -p board/warp/README builds/docs/README.warp +cp -p board/warp7/README builds/docs/README.warp7 + %files -%license Licenses/* -%doc README doc/develop/distro.rst doc/README.gpt -%doc doc/develop/uefi doc/usage doc/arch/arm64.rst +%doc README doc/README.kwbimage doc/README.distro doc/README.gpt +%doc doc/README.odroid doc/README.rockchip doc/develop/uefi doc/uImage.FIT doc/arch/arm64.rst +%doc builds/docs/* doc/board/amlogic/ doc/board/rockchip/ %{_bindir}/* -%{_mandir}/man1/dumpimage.1* -%{_mandir}/man1/kwboot.1* -%{_mandir}/man1/mkeficapsule.1* %{_mandir}/man1/mkimage.1* +%dir %{_datadir}/uboot/ -%if %{with toolsonly} %ifarch aarch64 %files -n uboot-images-armv8 -%license Licenses/* -%dir %{_datadir}/uboot/ %{_datadir}/uboot/* %endif -%ifarch riscv64 -%files -n uboot-images-riscv64 -%license Licenses/* -%dir %{_datadir}/uboot/ +%ifarch %{arm} +%files -n uboot-images-armv7 %{_datadir}/uboot/* %endif -%ifarch x86_64 -%files -n uboot-images-x86_64 -%license Licenses/* -%dir %{_datadir}/uboot/ -%{_datadir}/uboot/* -%endif -%endif - %changelog -* Thu Aug 27 2026 Peter Robinson - 1:2026.10-0.3.rc3 -- Update to 2026.10 RC3 +* Mon Nov 15 2021 Peter Robinson - 2021.10-3 +- Fixes for rk3399 devices -* Wed Aug 12 2026 Peter Robinson - 1:2026.10-0.2.rc2 -- Update to 2026.10 RC2 +* Thu Oct 14 2021 Peter Robinson - 2021.10-2 +- Fix booting from MMC for Rockchip 3399 (rhbz #2014182) +- Enable new rk3399 devices (Leez, NanoPi-M4B, NanoPi-4S, NanoPi-T4) (rhbz #2009126) -* Thu Jul 30 2026 Peter Robinson - 1:2026.10-0.1.rc1 -- Update to 2026.10 RC1 -- Update source URL +* Mon Oct 04 2021 Peter Robinson - 2021.10-1 +- Update to 2021.10 -* Fri Jul 17 2026 Fedora Release Engineering - 1:2026.07-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild +* Mon Sep 27 2021 Peter Robinson - 2021.10-0.7.rc5 +- Update to 2021.10 RC5 -* Tue Jul 07 2026 Peter Robinson - 1:2026.07-1 -- Update to 2026.07 GA +* Wed Sep 15 2021 Peter Robinson - 2021.10-0.6.rc4 +- Update to 2021.10 RC4 +- Proposed fix for RPi MMC clock issue -* Tue Jun 23 2026 Peter Robinson - 1:2026.07-0.4.rc5 -- Update to 2026.07 RC5 +* Tue Sep 14 2021 Sahana Prasad - 2021.10-0.6.rc3 +- Rebuilt with OpenSSL 3.0.0 -* Mon Jun 08 2026 Peter Robinson - 1:2026.07-0.3.rc4 -- Update to 2026.07 RC4 +* Mon Aug 30 2021 Peter Robinson - 2021.10-0.5.rc3 +- Update to 2021.10 RC3 -* Fri May 29 2026 Peter Robinson - 1:2026.07-0.2.rc3 -- Update to 2026.07 RC3 -- Update U-Boot Project URL -- Update RPi PCIe patches -- Various RPi fixes +* Tue Aug 24 2021 Peter Robinson - 2021.10-0.4.rc2 +- Fix for Raspberry Pi firmware properties -* Fri May 01 2026 Peter Robinson - 1:2026.07-0.1.rc1 -- Update to 2026.07 RC1 +* Mon Aug 23 2021 Peter Robinson - 2021.10-0.3.rc2 +- Fix for rockchip SPI -* Sat Apr 11 2026 Peter Robinson - 1:2026.04-2 -- Fix PCIe/USB on Raspberry Pi 4 (rhbz#2448365) -- Fix detection of some revisions of RPi5 +* Mon Aug 16 2021 Peter Robinson - 2021.10-0.2.rc2 +- Update to 2021.10 RC2 -* Tue Apr 07 2026 Peter Robinson - 1:2026.04-1 -- Update to 2026.04 GA +* Sun Aug 08 2021 Peter Robinson - 2021.10-0.1.rc1 +- Update to 2021.10 RC1 -* Sun Mar 29 2026 Peter Robinson - 1:2026.04-0.9.rc5 -- Enable NVME booting on RPi5 +* Thu Jul 22 2021 Peter Robinson - 2021.07-2 +- Fix regression for Rockchip devices running firmware from SPI flash -* Tue Mar 24 2026 Peter Robinson - 1:2026.04-0.8.rc5 -- Update to 2026.04 RC5 +* Mon Jul 05 2021 Peter Robinson - 2021.07-1 +- Update to 2021.07 GA -* Sat Mar 14 2026 Peter Robinson - 1:2026.04-0.7.rc4 -- Raspberry Pi fixes +* Mon Jun 28 2021 Peter Robinson - 2021.07-0.6.rc5 +- Update to 2021.07 RC5 +- Build SPI fash images for ROC-PC-RK3399 -* Tue Mar 10 2026 Peter Robinson - 1:2026.04-0.6.rc4 -- Update to 2026.04 RC4 +* Mon Jun 07 2021 Peter Robinson - 2021.07-0.5.rc4 +- Update to 2021.07 RC4 -* Fri Feb 27 2026 Peter Robinson - 1:2026.04-0.5.rc3 -- Update to 2026.04 RC3 +* Sat Jun 05 2021 Peter Robinson - 2021.07-0.4.rc3 +- Fix AllWinner devices booting from mSD/MMC -* Tue Feb 17 2026 Peter Robinson - 1:2026.04-0.4.rc2 -- Add initial bcm2712d0 identification +* Tue May 25 2021 Peter Robinson - 2021.07-0.3.rc3 +- Update to 2021.07 RC3 +- Build against ATF 2.5 GA -* Mon Feb 09 2026 Peter Robinson - 1:2026.04-0.3.rc2 -- Update to 2026.04 RC2 +* Thu May 13 2021 Peter Robinson - 2021.07-0.2.rc2 +- Build against new ATF 2.5-rc1 -* Tue Jan 27 2026 Peter Robinson - 1:2026.04-0.2.rc1 -- Update to 2026.04 RC1 +* Mon May 10 2021 Peter Robinson - 2021.07-0.1.rc2 +- Update to 2021.07 RC2 -* Mon Jan 19 2026 Javier Martinez Canillas - 1:2026.01-3 -- Add a uboot-images-x86_64 subpackage +* Wed Apr 28 2021 Peter Robinson - 2021.04-3 +- Upstream fix for console regression (rhbz 1946278) +- Fix for fallback.efi crash (rhbz 1733817) -* Sat Jan 17 2026 Fedora Release Engineering - 1:2026.01-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild +* Wed Apr 21 2021 Peter Robinson - 2021.04-2 +- Revert keyboard console regression change (rhbz 1946278) -* Tue Jan 06 2026 Peter Robinson - 1:2026.01-1 -- Update to 2026.01 GA +* Sun Apr 18 2021 Peter Robinson - 2021.04-1 +- Update to 2021.04 GA +- Fix DTB load check (rhbz 1946278) +- Build Rockchip SPI support as idbloader.spi +- Fixes for Rockchip devices +- Build Turris Omnia for MMC/SPI/UART -* Mon Dec 29 2025 Peter Robinson - 1:2026.01-0.4.rc5 -- Update to 2026.01 RC5 +* Wed Mar 17 2021 Peter Robinson - 2021.04-0.6.rc4 +- Update to 2021.04 RC4 +- Move to upstream fix for SMP on RPi3B and RPi3B+ -* Mon Dec 08 2025 Peter Robinson - 1:2026.01-0.3.rc4 -- Update to 2026.01 RC4 +* Sat Mar 13 2021 Peter Robinson - 2021.04-0.5.rc3 +- Fix for SMP on RPi3B and RPi3B+ +- Initial support for Pinephone 3Gb edition -* Fri Nov 28 2025 Peter Robinson - 1:2026.01-0.2.rc3 -- Updates for RPi +* Mon Mar 08 2021 Peter Robinson - 2021.04-0.4.rc3 +- Update to 2021.04 RC3 -* Mon Nov 24 2025 Peter Robinson - 1:2026.01-0.1.rc3 -- Update to 2026.01 RC3 +* Tue Feb 16 2021 Peter Robinson - 2021.04-0.3.rc2 +- Update to 2021.04 RC2 -* Thu Oct 16 2025 Peter Robinson - 1:2025.10-2 -- Drop residual Rockchip firmware (saves ~150Mb) +* Mon Feb 15 2021 Dennis Gilmore +- build spi and uart images in addition to mmc for helios4 and clearfog -* Mon Oct 13 2025 Peter Robinson - 1:2025.10-1 -- Update to 2025.10 GA (rhbz#2401964) -- Fix booting when using FW device-tree (rhbz#2402498) -- Fix for some variants of Raspberry Pi -- Fixes for Jetson device booting +* Wed Feb 10 2021 Peter Robinson - 2021.04-0.2.rc1 +- Fixes for network issues on some Allwinner devices -* Fri Sep 26 2025 Peter Robinson - 1:2025.10-0.7.rc5 -- Update to 2025.10 RC5 +* Mon Feb 01 2021 Peter Robinson - 2021.04-0.1.rc1 +- Update to 2021.04 RC1 +- Add new upstream devices -* Mon Sep 08 2025 Peter Robinson - 1:2025.10-0.6.rc4 -- Update to 2025.10 RC4 +* Wed Jan 27 2021 Fedora Release Engineering - 2021.01-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild -* Sun Sep 07 2025 Peter Robinson - 1:2025.10-0.5.rc3 -- Boot fixes for some Raspberry Pi variants +* Mon Jan 11 2021 Peter Robinson - 2021.01-1 +- Update to 2021.01 GA +- Updates for Raspberry Pi 4 Series of devices -* Wed Aug 27 2025 Peter Robinson - 1:2025.10-0.4.rc3 -- Fix booting on some Allwinner devices +* Tue Jan 5 2021 Peter Robinson - 2021.01-0.5.rc5 +- Update to 2021.01 RC5 -* Mon Aug 25 2025 Peter Robinson - 1:2025.10-0.3.rc3 -- Update to 2025.10 RC3 +* Sun Dec 27 2020 Peter Robinson - 2021.01-0.4.rc4 +- Update to 2021.01 RC4 +- Latest RPi-400/CM4 support patch -* Tue Aug 19 2025 Peter Robinson - 1:2025.10-0.2.rc2 -- Fix and re-enable Jetson Nano +* Tue Dec 15 2020 Peter Robinson - 2021.01-0.3.rc3 +- Update to 2021.01 RC3 +- Latest RPi-400/CM4 support patch +- Re-enable previously disabled device support -* Mon Aug 18 2025 Peter Robinson - 1:2025.10-0.1.rc2 -- Update to 2025.10 RC2 +* Mon Dec 14 2020 Javier Martinez Canillas - 2021.01-0.2.rc2 +- Fix a "scan_dev_for_efi" not defined error -* Fri Jul 25 2025 Fedora Release Engineering - 1:2025.07-3 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild +* Sun Nov 22 2020 Peter Robinson - 2021.01-0.1.rc2 +- Update to 2021.01 RC2 +- Latest Pinebook Pro display patches +- Initial RPi-400 support patch +- Update Fedora specific patches -* Thu Jul 10 2025 Peter Robinson - 1:2025.07-2 -- Update patch for rebase issue +* Sun Nov 8 2020 Peter Robinson - 2020.10-3 +- Fix SPI on Rockchip devices +- Latest Pinebook Pro display patches +- Fix Keyboard and USB-A ports on Pinebook Pro -* Wed Jul 09 2025 Peter Robinson - 1:2025.07-1 -- Update to 2025.07 GA +* Wed Oct 28 2020 Peter Robinson - 2020.10-2 +- Fix kernel installs for non EBBR systems +- Fix for wired networks on some Allwinner devices -* Fri Jun 27 2025 Peter Robinson - 1:2025.07-0.5.rc5 -- Update to 2025.07 RC5 -- Enable LWIP stack by default -- Enable HTTP(s) boot support +* Tue Oct 06 2020 Peter Robinson - 2020.10-1 +- Update to 2020.10 -* Thu Jun 26 2025 Javier Martinez Canillas - 1:2025.07-0.4.rc4 -- Add EFI_PARTITION_INFO_PROTOCOL support +* Sun Sep 27 2020 Peter Robinson - 2020.10-0.6.rc5 +- Initial support for display output on Pinebook Pro -* Sun Jun 15 2025 Peter Robinson - 1:2025.07-0.3.rc4 -- Update to 2025.07 RC4 +* Tue Sep 22 2020 Peter Robinson - 2020.10-0.5.rc5 +- Update to 2020.10 RC5 -* Tue May 13 2025 Peter Robinson - 1:2025.07-0.2.rc2 -- Update to 2025.07 RC2 +* Wed Sep 09 2020 Peter Robinson - 2020.10-0.4.rc4 +- Update to 2020.10 RC4 -* Thu May 01 2025 Peter Robinson - 1:2025.07-0.1.rc1 -- Update to 2025.07 RC1 +* Wed Aug 19 2020 Peter Robinson - 2020.10-0.3.rc2 +- Enable a number of new Rockchip devices -* Sun Apr 20 2025 Peter Robinson - 1:2025.04-2 -- Fix for RPi5 serial console +* Mon Aug 10 2020 Peter Robinson - 2020.10-0.2.rc2 +- Update to 2020.10 RC2 -* Tue Apr 08 2025 Peter Robinson - 1:2025.04-1 -- Update to 2025.04 GA +* Tue Jul 28 2020 Peter Robinson - 2020.10-0.1.rc1 +- 2020.10 RC1 -* Tue Mar 25 2025 Peter Robinson - 1:2025.04-0.7.rc5 -- Update to 2025.04 RC5 +* Tue Jul 14 2020 Tom Stellard - 2020.07-2 +- Use make macros +- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro -* Wed Mar 12 2025 Peter Robinson - 1:2025.04-0.6.rc4 -- Update to 2025.04 RC4 +* Mon Jul 06 2020 Peter Robinson - 2020.07-1 +- 2020.07 GA -* Wed Feb 26 2025 Peter Robinson - 1:2025.04-0.5.rc3 -- Update to 2025.04 RC3 +* Tue Jun 23 2020 Peter Robinson - 2020.07-0.5.rc5 +- 2020.07 RC5 -* Tue Feb 18 2025 David Abdurachmanov - 1:2025.04-0.4.rc2 -- Add support for riscv64 +* Thu Jun 18 2020 Peter Robinson - 2020.07-0.4.rc4 +- Update various patches to latest upstream -* Tue Feb 11 2025 Peter Robinson - 1:2025.04-0.3.rc2 -- Update to 2025.05 RC2 +* Wed Jun 10 2020 Peter Robinson - 2020.07-0.3.rc4 +- 2020.07 RC4 +- Minor updates and other fixes -* Tue Feb 11 2025 Peter Robinson - 1:2025.04-0.2.rc1 -- Update to 2025.05 RC1 +* Tue May 12 2020 Peter Robinson - 2020.07-0.2.rc2 +- 2020.07 RC2 +- Minor device updates -* Tue Jan 28 2025 Peter Robinson - 1:2025.01-3 -- Add new fdt_add_pubkey tool +* Wed Apr 29 2020 Peter Robinson - 2020.07-0.1.rc1 +- 2020.07 RC1 -* Sun Jan 19 2025 Fedora Release Engineering - 1:2025.01-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild +* Tue Apr 21 2020 Peter Robinson - 2020.04-4 +- Initial support for USB on Rasperry Pi 4 -* Tue Jan 07 2025 Peter Robinson - 1:2025.01-1 -- Update to 2025.01 GA +* Tue Apr 21 2020 Peter Robinson - 2020.04-3 +- Ship u-boot-rockchip.bin for SPI flash -* Mon Jan 06 2025 Peter Robinson - 1:2025.01-0.2.rc6 -- Rebuild for TF-A 2.12 +* Mon Apr 20 2020 Peter Robinson - 2020.04-2 +- Fix ATF for new aarch64 devices +- Fix Wandboard board detection (rhbz 1825247) +- Fix mSD card on RockPro64 +- Enable (inital) Pinebook Pro -* Tue Dec 31 2024 Peter Robinson - 1:2025.01-0.1.rc6 -- Update to 2025.01 RC6 +* Tue Apr 14 2020 Peter Robinson - 2020.04-1 +- 2020.04 -* Fri Oct 11 2024 Peter Robinson - 1:2024.10-1 -- Update to 2024.10 GA -- Fix passing RPi firmware CMA setting to kernel DT -- Update Geekbox +* Tue Apr 7 2020 Peter Robinson 2020.04-0.7-rc5 +- 2020.04 RC5 -* Thu Oct 03 2024 Peter Robinson - 1:2024.10-0.8.rc6 -- Pass CMA FW setting through to kernel DT for Raspberry Pi +* Tue Mar 31 2020 Peter Robinson 2020.04-0.6-rc4 +- 2020.04 RC4 +- Updates for NVIDIA Jetson platforms +- Support RNG for random seed for KASLR on some Rockchip devices -* Tue Oct 01 2024 Peter Robinson - 1:2024.10-0.7.rc6 -- Update to 2024.10 RC6 +* Thu Mar 26 2020 Peter Robinson 2020.04-0.5-rc3 +- Fix ext4 alignment issue seen on some NXP i.MX devices -* Mon Sep 16 2024 Peter Robinson - 1:2024.10-0.6.rc5 -- Update to 2024.10 RC5 +* Wed Feb 26 2020 Peter Robinson 2020.04-0.4-rc3 +- 2020.04 RC3 -* Fri Sep 6 2024 Peter Robinson - 1:2024.10-0.5.rc4 -- Add missing licenses directory +* Thu Feb 13 2020 Peter Robinson 2020.04-0.3-rc2 +- 2020.04 RC2 -* Tue Sep 03 2024 Peter Robinson - 1:2024.10-0.4.rc4 -- Update to 2024.10 RC4 +* Sun Feb 2 2020 Peter Robinson 2020.04-0.2-rc1 +- Update genet NIC driver -* Mon Sep 02 2024 Peter Robinson - 1:2024.10-0.3.rc3 -- Fix Allwinner firmware chainloading (rhbz#2309138) -- Fix ATF firmware selection on a number of devices -- Support Allwinner SCP firmware (fixes suspend/resume) +* Wed Jan 29 2020 Peter Robinson 2020.04-0.1-rc1 +- 2020.04 RC1 -* Tue Aug 27 2024 Peter Robinson - 1:2024.10-0.2.rc3 -- Update to 2024.10 RC3 -- Enable initial QCM6490 SoC support - -* Thu Aug 15 2024 Peter Robinson - 1:2024.10-0.1.rc2 -- Update to 2024.10 RC2 - -* Tue Jul 23 2024 Peter Robinson - 1:2024.07-1 -- Update to 2024.07 - -* Sat Jul 20 2024 Fedora Release Engineering - 1:2024.07-0.3.rc4 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild - -* Tue Jun 18 2024 Peter Robinson - 1:2024.07-0.2.rc4 -- Update to 2024.07 RC4 - -* Sat May 25 2024 Peter Robinson - 1:2024.07-0.1.rc3 -- Update to 2024.07 RC3 - -* Wed Apr 03 2024 Peter Robinson - 1:2024.04-1 -- Update to 2024.04 GA -- Rockchip rk3328 USB fixes - -* Wed Mar 27 2024 Peter Robinson - 1:2024.04-0.8.rc5 -- Update to 2024.04 RC5 - -* Thu Mar 21 2024 Peter Robinson - 1:2024.04-0.7.rc4 -- Updated patch for DTB loading - -* Fri Mar 15 2024 Peter Robinson - 1:2024.04-0.6.rc4 -- Updated fix for FDT load - -* Wed Mar 13 2024 Peter Robinson - 1:2024.04-0.5.rc4 -- Fixes for Rockchip rk3399 autoboot - -* Tue Mar 12 2024 Peter Robinson - 1:2024.04-0.4.rc4 -- Update to 2024.04 RC4 -- Initial fix for loading DT off /boot (rhbz 2247873) - -* Thu Feb 29 2024 Peter Robinson - 1:2024.04-0.3.rc3 -- Update to 2024.04 RC3 -- Enable a number of new upstream devices -- Upstream now builds Rockchip SPI artifacts -- Various cleanups -- Fix ESP partition detection to enable EFI vars - -* Wed Feb 14 2024 Peter Robinson - 1:2024.04-0.2.rc2 -- Update to 2024.04 RC2 - -* Sat Jan 27 2024 Fedora Release Engineering - 1:2024.01-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild - -* Mon Jan 08 2024 Peter Robinson - 1:2024.01-1 -- Update to 2024.01 +* Tue Jan 7 2020 Peter Robinson 2020.01-1 +- 2020.01 diff --git a/uefi-Add-all-options-for-EFI-System-Partitions.patch b/uefi-Add-all-options-for-EFI-System-Partitions.patch deleted file mode 100644 index 3bf1ec8..0000000 --- a/uefi-Add-all-options-for-EFI-System-Partitions.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 86782e882e9542f5f402e00cd87efb36ad0552d3 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Sat, 2 Mar 2024 11:17:42 +0000 -Subject: [PATCH v4] disk: dos: Add all options for EFI System Partitions - -The EFI spec states that the ESP can be any of FAT12/16/32 but for -compatibility doesn't necssarily require the partition to be the -EFI partition table ID of 0xef. A number of arm devices will not -find their firmware on a FAT partition with an ID of 0xef so also -allow the original FAT12/16/32 partition IDs as they are also -permissable for an ESP. - -Signed-off-by: Peter Robinson ---- - -v2: -- Add 0x0c option -- Make hex constants consistent -- Move from if to switch statement -v3: -- Fix switch brain fart -v4: -- Drop boot_ind out of switch - - disk/part_dos.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - -diff --git a/disk/part_dos.c b/disk/part_dos.c -index 567ead7511d..a35181dff4f 100644 ---- a/disk/part_dos.c -+++ b/disk/part_dos.c -@@ -40,10 +40,21 @@ static int get_bootable(dos_partition_t *p) - { - int ret = 0; - -- if (p->sys_ind == 0xef) -+ switch (p->sys_ind) { -+ case 0x01: -+ case 0x06: -+ case 0x0b: -+ case 0x0c: -+ case 0xef: - ret |= PART_EFI_SYSTEM_PARTITION; -+ break; -+ default: -+ break; -+ } -+ - if (p->boot_ind == 0x80) - ret |= PART_BOOTABLE; -+ - return ret; - } - --- -2.44.0 - diff --git a/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch b/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch index 5954848..c28fdb0 100644 --- a/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch +++ b/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch @@ -1,6 +1,6 @@ -From 4306c538d4a00dd1aa46c55c3c4005c2b0bf7cd5 Mon Sep 17 00:00:00 2001 +From fd3434c754b3b8dddb345352a2434b6b8445343a Mon Sep 17 00:00:00 2001 From: Peter Robinson -Date: Thu, 24 Nov 2022 12:57:55 +0000 +Date: Sun, 18 Apr 2021 14:05:45 +0100 Subject: [PATCH] distro: load FDT from any partition on boot device In the EFI_LOADER boot path, we were only checking the FAT partition @@ -22,14 +22,14 @@ knows) and SoC/board specific ${fdtfile} (which grub does not know). Signed-off-by: Rob Clark Signed-off-by: Peter Robinson --- - include/config_distro_bootcmd.h | 37 +++++++++++++++++++++------------ - 1 file changed, 24 insertions(+), 13 deletions(-) + include/config_distro_bootcmd.h | 35 ++++++++++++++++++++++----------- + 1 file changed, 23 insertions(+), 12 deletions(-) diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h -index fcb319a20ae..e71004fad9c 100644 +index 2627c2a6a5..eadd1080b3 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h -@@ -155,28 +155,39 @@ +@@ -148,26 +148,37 @@ "fi\0" \ \ "load_efi_dtb=" \ @@ -44,13 +44,11 @@ index fcb319a20ae..e71004fad9c 100644 + "scan_dev_for_dtb=" \ "setenv efi_fdtfile ${fdtfile}; " \ BOOTENV_EFI_SET_FDTFILE_FALLBACK \ - BOOTENV_RUN_EXTENSION_INIT \ - "for prefix in ${efi_dtb_prefixes}; do " \ - "if test -e ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${prefix}${efi_fdtfile}; then " \ - "run load_efi_dtb; " \ -- BOOTENV_RUN_EXTENSION_APPLY \ - "fi;" \ - "done;" \ - "run boot_efi_bootmgr;" \ @@ -67,7 +65,6 @@ index fcb319a20ae..e71004fad9c 100644 + "${devnum}:${dtb_devp} " \ + "${prefix}${efi_fdtfile};"\ + "run load_efi_dtb; " \ -+ BOOTENV_RUN_EXTENSION_APPLY \ + "fi;" \ + "done; " \ + "done; " \ @@ -83,5 +80,5 @@ index fcb319a20ae..e71004fad9c 100644 "fi; " \ "setenv efi_fdtfile\0" -- -2.38.1 +2.31.1 diff --git a/uefi-enable-SetVariableRT-with-volotile-storage.patch b/uefi-enable-SetVariableRT-with-volotile-storage.patch deleted file mode 100644 index ee9bcf4..0000000 --- a/uefi-enable-SetVariableRT-with-volotile-storage.patch +++ /dev/null @@ -1,33 +0,0 @@ -From fd736dd720b29fa69a4bb87492f3f94dc6076996 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Tue, 25 Mar 2025 17:13:44 +0000 -Subject: [PATCH] efi: enable SetVariableRT with volotile storage - -Signed-off-by: Peter Robinson ---- - lib/efi_loader/Kconfig | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig -index d4f6b56afaa..3e522131b01 100644 ---- a/lib/efi_loader/Kconfig -+++ b/lib/efi_loader/Kconfig -@@ -108,6 +108,7 @@ choice - config EFI_VARIABLE_FILE_STORE - bool "Store non-volatile UEFI variables as file" - depends on FAT_WRITE -+ default y - help - Select this option if you want non-volatile UEFI variables to be - stored as file /ubootefi.var on the EFI system partition. -@@ -115,6 +116,7 @@ config EFI_VARIABLE_FILE_STORE - config EFI_RT_VOLATILE_STORE - bool "Allow variable runtime services in volatile storage (e.g RAM)" - depends on EFI_VARIABLE_FILE_STORE -+ default y - help - When EFI variables are stored on file we don't allow SetVariableRT, - since the OS doesn't know how to write that file. At the same time --- -2.49.0 - diff --git a/uefi-enable-https-boot-by-default.patch b/uefi-enable-https-boot-by-default.patch deleted file mode 100644 index dc0a683..0000000 --- a/uefi-enable-https-boot-by-default.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 7eabab2fda12b7a4417e5c7f29a507dfa9e7fffd Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Sun, 3 May 2026 09:24:34 +0100 -Subject: [PATCH] enable https boot by default - -Signed-off-by: Peter Robinson ---- - cmd/Kconfig | 1 + - lib/efi_loader/Kconfig | 1 + - lib/mbedtls/Kconfig | 3 ++- - net/Kconfig | 3 ++- - 4 files changed, 6 insertions(+), 2 deletions(-) - -diff --git a/cmd/Kconfig b/cmd/Kconfig -index c71c6824a19..8ff14adffe1 100644 ---- a/cmd/Kconfig -+++ b/cmd/Kconfig -@@ -2289,6 +2289,7 @@ config CMD_WGET - - config WGET_HTTPS - bool "wget https" -+ default y - depends on CMD_WGET - depends on PROT_TCP_LWIP - depends on MBEDTLS_LIB -diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig -index 4cb13ae7c8a..20733429962 100644 ---- a/lib/efi_loader/Kconfig -+++ b/lib/efi_loader/Kconfig -@@ -609,6 +609,7 @@ config EFI_BOOTMGR - - config EFI_HTTP_BOOT - bool "EFI HTTP Boot support" -+ default y - depends on NET - depends on CMDLINE - select CMD_NET -diff --git a/lib/mbedtls/Kconfig b/lib/mbedtls/Kconfig -index 789721ee6cd..7a241c2bc26 100644 ---- a/lib/mbedtls/Kconfig -+++ b/lib/mbedtls/Kconfig -@@ -2,7 +2,7 @@ - - choice - prompt "Crypto libraries (U-Boot Proper)" -- default LEGACY_HASHING_AND_CRYPTO -+ default MBEDTLS_LIB - help - Select crypto libraries. - LEGACY_HASHING_AND_CRYPTO for legacy crypto libraries, -@@ -15,6 +15,7 @@ config LEGACY_HASHING_AND_CRYPTO - - config MBEDTLS_LIB - bool "MbedTLS libraries" -+ default y - select MBEDTLS_LIB_X509 - endchoice - -diff --git a/net/Kconfig b/net/Kconfig -index e712a0dd2ac..3158d37dff7 100644 ---- a/net/Kconfig -+++ b/net/Kconfig -@@ -16,7 +16,7 @@ if NET - - choice - prompt "Networking stack" -- default NET_LEGACY -+ default NET_LWIP - - config NET_LEGACY - bool "Legacy U-Boot networking stack" -@@ -27,6 +27,7 @@ config NET_LEGACY - - config NET_LWIP - bool "Use lwIP for networking stack" -+ default y - select NETDEVICES - help - Include networking support based on the lwIP (lightweight IP) --- -2.54.0 - diff --git a/uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch b/uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch deleted file mode 100644 index ac58bad..0000000 --- a/uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch +++ /dev/null @@ -1,190 +0,0 @@ -From 56a985cec8592a8de88e7f254df82f5d444a5ecc Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Thu, 28 May 2026 22:08:07 +0100 -Subject: [PATCH] initial find_fdt_location for finding the DT on disk - -The old distro boot looked for a DT on the first boot partition -in the /dtb or /dtb/current directories, and Fedora extended this -to look not just on the boot partition but all the partitions on -that disk. - -The new ways of booting, both bootstd and bootefi bootmgr processes -don't properly look for those options. This provides a function -to search for the DTB on disk so that if the other DT mechanisms -don't work this will look for one on disk to provide a working DT -so that devices will continue to work as they did previously. - -Signed-off-by: Peter Robinson ---- - cmd/bootmenu.c | 5 ++ - include/efi_loader.h | 2 + - lib/efi_loader/efi_helper.c | 106 +++++++++++++++++++++++++++++++++++- - 3 files changed, 112 insertions(+), 1 deletion(-) - -diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c -index 528afd221d0..a10ea35a687 100644 ---- a/cmd/bootmenu.c -+++ b/cmd/bootmenu.c -@@ -502,6 +502,11 @@ static void handle_uefi_bootnext(void) - u16 bootnext; - efi_status_t ret; - efi_uintn_t size; -+ const char *fdt_opt; -+ -+ /* Find the DTB on disk */ -+ log_debug("We will load the DTB\n"); -+ fdt_opt = find_fdt_location(); - - /* Initialize EFI drivers */ - ret = efi_init_obj_list(); -diff --git a/include/efi_loader.h b/include/efi_loader.h -index 3a4d502631c..b11f8a2cb42 100644 ---- a/include/efi_loader.h -+++ b/include/efi_loader.h -@@ -574,6 +574,8 @@ struct efi_register_notify_event { - struct list_head handles; - }; - -+/* Find the FDT on any partition */ -+char *find_fdt_location(void); - /* called at pre-initialization */ - int efi_init_early(void); - /* Initialize efi execution environment */ -diff --git a/lib/efi_loader/efi_helper.c b/lib/efi_loader/efi_helper.c -index 44b806aadc4..61e982091b9 100644 ---- a/lib/efi_loader/efi_helper.c -+++ b/lib/efi_loader/efi_helper.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -98,6 +99,99 @@ int efi_get_pxe_arch(void) - return -EINVAL; - } - -+/* We need to pass a blk device in and return a location, or a loaded DT */ -+char *find_fdt_location(void) -+{ -+ const char *fdt_filename; -+ /* FIXME: dynamic size */ -+ char fdt_fullpath[60]; -+ const char *prefix; -+ struct udevice *blk; -+ /* FIXME: Fedora really only cares about first 2*/ -+ int MAX_PART = 8; -+ int part; -+ struct disk_partition info; -+ int fdtext; -+ int ret; -+ int retfdt; -+ int retload; -+ loff_t fdtsize; -+ ulong pbraddr; -+ loff_t len_read; -+ -+ /* step one logic: we have the DT name we're hunting for */ -+ fdt_filename = env_get("fdtfile"); -+ if (fdt_filename) { -+ log_debug("FFL: We're looking for the DTB now!: %s\n", fdt_filename); -+ -+ /* probe all block disks to search for fdt */ -+ uclass_foreach_dev_probe(UCLASS_BLK, blk) { -+ log_debug("FFL: dev name: %s\n", blk->name); -+ struct blk_desc *desc; -+ desc = dev_get_uclass_plat(blk); -+ /* we should get a partition count here for looping */ -+ /* For loop for each partition */ -+ /* Need to also deal with zero part whole disk - part_get_info_whole_disk */ -+ for (part = 1; part <= MAX_PART; part++) { -+ log_debug("FFL: part num: %d\n", part); -+ ret = part_get_info(desc, part, &info); -+ /* if we have partition check it for DT */ -+ if (ret < 0) { -+ log_debug("FFL: no partition\n"); -+ } else { -+ log_debug("FFL: we have a partition\n"); -+ /* we should have a case/for prefix in =/ /dtb/ /dtb/current/ */ -+ /* but for now we hard code if for Fedora */ -+ prefix = "/dtb"; -+ snprintf(fdt_fullpath, sizeof(fdt_fullpath), "%s/%s", prefix, fdt_filename); -+ log_debug("FFL: full name: %s\n", fdt_fullpath); -+ /* search for DT on partition and either find and exit or continue */ -+ if (fs_set_blk_dev_with_part(desc, part) == 0){ -+ log_debug("FFL: set block part pass\n"); -+ fdtext = fs_exists(fdt_fullpath); -+ if (fdtext) { -+ /* we have a fdt!*/ -+ if (fs_set_blk_dev_with_part(desc, part) == 0){ -+ retfdt = fs_size(fdt_fullpath, &fdtsize); -+ if (retfdt == 0) { -+ log_debug("FFL: we have found a DT on disk, size %lld\n", fdtsize); -+ /* Get the main fdt and map it */ -+ const char *fdt_pbr; -+ fdt_pbr = env_get("fdt_addr_r"); -+ pbraddr = hextoul(fdt_pbr, NULL); -+ log_debug("FFL: fdr addr: %s\n", fdt_pbr); -+ if (fs_set_blk_dev_with_part(desc, part) == 0){ -+ retload = fs_read(fdt_fullpath, pbraddr, 0, fdtsize, &len_read); -+ if (retload == 0) { -+ log_debug("FFL: we have a loaded DT, size %lld we can return\n", fdtsize); -+ log_info("Found DTB: %s\n", fdt_filename); -+ return fdt_pbr; -+ } else { -+ log_debug("FFL: DT load failed\n"); -+ } -+ } -+ } else { -+ log_debug("FFL: we DON'T have a DT with size\n"); -+ } -+ } -+ } else { -+ /* we don't have a fdt!*/ -+ log_debug("FFL: we DON'T have a DT\n"); -+ } -+ } else { -+ log_debug("FFL: set block part FAIL\n"); -+ } -+ } -+ } -+ } -+ } else { -+ log_debug("FFL: fdt_filename not defined!!\n"); -+ } -+ -+ /* We didn't find a FDT */ -+ return NULL; -+} -+ - /** - * efi_create_current_boot_var() - Return Boot#### name were #### is replaced by - * the value of BootCurrent -@@ -558,11 +652,21 @@ efi_status_t efi_install_fdt(void *fdt) - const char *fdt_opt; - uintptr_t fdt_addr; - -+ /* Check if there is device tree loaded from disk */ -+ fdt_opt = find_fdt_location(); -+ if (fdt_opt) -+ log_info("Found DTB on disk\n"); -+ - /* Check if there is a hardware device tree */ -- fdt_opt = env_get("fdt_addr"); -+ if (!fdt_opt) { -+ fdt_opt = env_get("fdt_addr"); -+ if (fdt_opt) -+ log_info("Found DTB: Prior firmware\n"); -+ } - /* Use our own device tree as fallback */ - if (!fdt_opt) { - fdt_opt = env_get("fdtcontroladdr"); -+ log_info("Using DT from U-Boot\n"); - if (!fdt_opt) { - log_err("need device tree\n"); - return EFI_NOT_FOUND; --- -2.54.0 - diff --git a/x86_64-boards b/x86_64-boards deleted file mode 100644 index dec8df3..0000000 --- a/x86_64-boards +++ /dev/null @@ -1 +0,0 @@ -qemu-x86_64