2026.10 RC3

This way on boot we'll get one of the three:

- Found DTB on disk
- Found DTB: Prior firmware
- Using DT from U-Boot

Since it's only one log statement per boot I don't think this will
add too much noise.

0001-Fix-BeagleAI-detection.patch

@@ -1,29 +0,0 @@
-From 1849ef423238aeb1732eb3b8e67eb46bc21401c7 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 10 Sep 2020 14:24:12 +0100
-Subject: [PATCH] Fix BeagleAI detection
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- board/ti/am57xx/board.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
-index 7809875510..3232812a97 100644
---- a/board/ti/am57xx/board.c
-+++ b/board/ti/am57xx/board.c
-@@ -527,8 +527,10 @@ void do_board_detect(void)
- 
- 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
- 				  CONFIG_EEPROM_CHIP_ADDRESS);
--	if (rc)
-+	if (rc) {
- 		printf("ti_i2c_eeprom_init failed %d\n", rc);
-+		ti_i2c_eeprom_am_set("BBONE-AI", "A");
-+	}
- 
- #ifdef CONFIG_SUPPORT_EMMC_BOOT
- 	rc = board_bootmode_has_emmc();
--- 
-2.26.2
-

0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch

@@ -1,518 +0,0 @@
-From 25ce28126444900b7b3efef36c6b9d15a6ab9af1 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 28 Oct 2020 10:08:44 +0000
-Subject: [PATCH] Fixes for AllWinner ethernet network interfaces
-
-The upstream kernel in fixing stuff has broken stuff.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/sun50i-a64-bananapi-m64.dts        | 2 +-
- arch/arm/dts/sun50i-a64-nanopi-a64.dts          | 2 +-
- arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts | 2 +-
- arch/arm/dts/sun50i-a64-olinuxino.dts           | 2 +-
- arch/arm/dts/sun50i-a64-orangepi-win.dts        | 2 +-
- arch/arm/dts/sun50i-a64-pine64-plus.dts         | 2 +-
- arch/arm/dts/sun50i-a64-sopine-baseboard.dts    | 2 +-
- arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts  | 2 +-
- arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts     | 2 +-
- arch/arm/dts/sun50i-h5-nanopi-neo2.dts          | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-pc2.dts         | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-prime.dts       | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   | 2 +-
- arch/arm/dts/sun50i-h6-beelink-gs1.dts          | 2 +-
- arch/arm/dts/sun50i-h6-pine-h64.dts             | 2 +-
- arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts     | 2 +-
- arch/arm/dts/sun7i-a20-bananapi.dts             | 2 +-
- arch/arm/dts/sun7i-a20-bananapro.dts            | 2 +-
- arch/arm/dts/sun7i-a20-cubietruck.dts           | 2 +-
- arch/arm/dts/sun7i-a20-hummingbird.dts          | 2 +-
- arch/arm/dts/sun7i-a20-lamobo-r1.dts            | 2 +-
- arch/arm/dts/sun7i-a20-olimex-som-evb.dts       | 2 +-
- arch/arm/dts/sun7i-a20-olimex-som204-evb.dts    | 2 +-
- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts      | 2 +-
- arch/arm/dts/sun7i-a20-orangepi-mini.dts        | 2 +-
- arch/arm/dts/sun7i-a20-orangepi.dts             | 2 +-
- arch/arm/dts/sun7i-a20-pcduino3-nano.dts        | 2 +-
- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts     | 2 +-
- arch/arm/dts/sun8i-a83t-bananapi-m3.dts         | 2 +-
- arch/arm/dts/sun8i-a83t-cubietruck-plus.dts     | 2 +-
- arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts        | 2 +-
- arch/arm/dts/sun8i-h3-orangepi-plus.dts         | 2 +-
- arch/arm/dts/sun8i-h3-orangepi-plus2e.dts       | 2 +-
- arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts    | 2 +-
- arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts    | 2 +-
- arch/arm/dts/sunxi-bananapi-m2-plus.dtsi        | 2 +-
- 36 files changed, 36 insertions(+), 36 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-index ef1c90401b..e1c22aeb29 100644
---- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-@@ -112,7 +112,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-index 31884dbc88..03ebe3e44b 100644
---- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-@@ -102,7 +102,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dcdc1>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-index 6a2154525d..94caf110ab 100644
---- a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-+++ b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-@@ -30,7 +30,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	allwinner,tx-delay-ps = <600>;
-diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
-index f7a4bccaa5..2396d9b797 100644
---- a/arch/arm/dts/sun50i-a64-olinuxino.dts
-+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
-@@ -102,7 +102,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dcdc1>;
- 	allwinner,tx-delay-ps = <600>;
-diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-index b0c64f7579..5b5d4f31b6 100644
---- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
-+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-@@ -127,7 +127,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
-index 24f1aac366..b09b4276f1 100644
---- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
-+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
-@@ -52,7 +52,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-index 53fcc9098d..4a50a18128 100644
---- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-@@ -95,7 +95,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-index df1b9263ad..6e30a564c8 100644
---- a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-+++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-@@ -36,7 +36,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	/delete-property/ allwinner,leds-active-low;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-index 4f9ba53ffa..9d93fe1536 100644
---- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-+++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-@@ -96,7 +96,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-index b059e20813..e8ab8c2df5 100644
---- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-+++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-@@ -75,7 +75,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-index 70b5f09984..6cc567ea99 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-@@ -118,7 +118,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-index cb44bfa598..33ab44072e 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-@@ -124,7 +124,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-index ef5ca64442..de448ca51e 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-@@ -69,7 +69,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-index 0dc33c90dd..024035d36e 100644
---- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-@@ -64,7 +64,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ext_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_aldo2>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
-index 1898345183..13fbf26817 100644
---- a/arch/arm/dts/sun50i-h6-pine-h64.dts
-+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
-@@ -66,7 +66,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ext_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_aldo2>;
- 	allwinner,rx-delay-ps = <200>;
-diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-index e2bfe00588..4dbcad1343 100644
---- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-@@ -130,7 +130,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
-index 81bc85d398..33040c43bc 100644
---- a/arch/arm/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
-@@ -132,7 +132,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
-index 0176e9de01..8a75545e22 100644
---- a/arch/arm/dts/sun7i-a20-bananapro.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
-@@ -110,7 +110,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
-index 99f531b8d2..46a9f4669e 100644
---- a/arch/arm/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
-@@ -151,7 +151,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
-index fd0153f656..5c3d107094 100644
---- a/arch/arm/dts/sun7i-a20-hummingbird.dts
-+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
-@@ -101,7 +101,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_vdd>;
- 	/* phy reset config */
- 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-index f91e1bee44..8173d77c12 100644
---- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -120,7 +120,7 @@
- &gmac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 	/delete-property/#address-cells;
-diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-index f0e6a96e57..f0c5160ff8 100644
---- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-@@ -112,7 +112,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-index 823aabce04..ff42708137 100644
---- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-@@ -106,7 +106,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy3>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_vcc3v3>;
- 
- 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-index 4e1c590eb0..996201665b 100644
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-@@ -112,7 +112,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-index 15881081ca..b80215c61c 100644
---- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-@@ -121,7 +121,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
-index d64de2e73a..66efb7d1ab 100644
---- a/arch/arm/dts/sun7i-a20-orangepi.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
-@@ -97,7 +97,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-index 538ea15fa3..205eaae44a 100644
---- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-@@ -115,7 +115,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-index c27e56091f..56cc5791c4 100644
---- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-@@ -82,7 +82,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-index eaff6fa401..2beafe3a31 100644
---- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-@@ -123,7 +123,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_sw>;
- 	phy-handle = <&rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	allwinner,rx-delay-ps = <700>;
- 	allwinner,tx-delay-ps = <700>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-index 5dba4fc310..ecd9ff38a8 100644
---- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-@@ -160,7 +160,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_dldo4>;
- 	phy-handle = <&rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-index 4ba533b034..bc370d4ea1 100644
---- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-@@ -96,7 +96,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-index 97f497854e..d05fa679dc 100644
---- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-@@ -85,7 +85,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-index 6dbf7b2e0c..b6ca45d18e 100644
---- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-@@ -67,7 +67,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-index c488aaacbd..9c20245eef 100644
---- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-@@ -129,7 +129,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy-handle = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-index 15c22b06fc..3ab6f47cea 100644
---- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-@@ -120,7 +120,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy-handle = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-index 39263e74fb..8e5cb3b3fd 100644
---- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-+++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-@@ -126,7 +126,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
--- 
-2.28.0
-

10-devicetree.install

@@ -1,73 +0,0 @@
-#!/bin/bash
-
-# set -x
-
-if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]
-then
-COMMAND="$1"
-KERNEL_VERSION="$2"
-#BOOT_DIR_ABS="$3"
-#KERNEL_IMAGE="$4"
-
-[ -f /etc/u-boot.conf ] && source /etc/u-boot.conf || true
-[ -z "$FIRMWAREDT" ] || FirmwareDT=$FIRMWAREDT
-
-if [[ $FirmwareDT == "True" ]]
-then
-	# if we want to use firmware DT we remove symlink to current kernel DT
-        if [ -h /boot/dtb ]; then
-            rm -f /boot/dtb
-        fi
-	exit 0
-fi
-
-# Setup a /boot/dtb -> /boot/dtb-$newest_kernel_version symlink so that
-# u-boot can find the correct dtb to load.
-#
-# If invoked to 'add' a new kernel, find the newest based on `sort`ing
-# the kernel versions dtb.  If 'remove', then follow basically the same
-# procedure but exclude the version currently being removed.
-#
-# The theory of operation here is that, while newer kernels may add new
-# dtb nodes and fields, as upstreaming hw support for some particular
-# device progresses, it should never make backward incompatible changes.
-# So it should always be safe to use a newer dtb with an older kernel.
-
-    list_dtb_versions() {
-        excluded_version="$1"
-        for dtbdir in /boot/dtb-*; do
-            dtbver=${dtbdir#*-}
-            if [ "$dtbver" != "$excluded_version" ]; then
-                echo $dtbver
-            fi
-        done
-    }
-
-    setup_dtb_link() {
-        ver=`list_dtb_versions $1 | sort -r --sort=version | head -1`
-        if [ -h /boot/dtb ]; then
-            rm -f /boot/dtb
-        fi
-        ln -s dtb-$ver /boot/dtb
-    }
-
-    ret=0
-    case "$COMMAND" in
-        add)
-            # If we're adding a kernel we want that version
-            if [ -h /boot/dtb ]; then
-                rm -f /boot/dtb
-            fi
-            ln -s dtb-$KERNEL_VERSION /boot/dtb
-            ret=$?
-            ;;
-        remove)
-            setup_dtb_link $KERNEL_VERSION
-            ret=$?
-            ;;
-    esac
-    exit $ret
-else
-    # Just exit on non ARM
-    exit 0
-fi

AllWinner-PineTab.patch

@@ -1,538 +0,0 @@
-From 9b10863bc8b14ca5463a95dd2c77555cfc68f326 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 9 Sep 2020 10:59:31 +0100
-Subject: [PATCH] Initial PineTab dts from linux 5.7-rc1
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/Makefile               |   1 +
- arch/arm/dts/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++++++++++++
- 2 files changed, 461 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-a64-pinetab.dts
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 193f5c6138..57ef94450a 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
- 	sun50i-a64-pinephone-1.0.dtb \
- 	sun50i-a64-pinephone-1.1.dtb \
- 	sun50i-a64-pinephone-1.2.dtb \
-+	sun50i-a64-pinetab.dtb \
- 	sun50i-a64-sopine-baseboard.dtb \
- 	sun50i-a64-teres-i.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
-diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts
-new file mode 100644
-index 0000000000..316e8a4439
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinetab.dts
-@@ -0,0 +1,460 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+#include "sun50i-a64-cpu-opp.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pwm/pwm.h>
-+
-+/ {
-+	model = "PineTab";
-+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		ethernet0 = &rtl8723cs;
-+	};
-+
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
-+		default-brightness-level = <15>;
-+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-+		power-supply = <&vdd_bl>;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	i2c-csi {
-+		compatible = "i2c-gpio";
-+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
-+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
-+		i2c-gpio,delay-us = <5>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		/* Rear camera */
-+		ov5640: camera@3c {
-+			compatible = "ovti,ov5640";
-+			reg = <0x3c>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&csi_mclk_pin>;
-+			clocks = <&ccu CLK_CSI_MCLK>;
-+			clock-names = "xclk";
-+
-+			AVDD-supply = <&reg_dldo3>;
-+			DOVDD-supply = <&reg_aldo1>;
-+			DVDD-supply = <&reg_eldo3>;
-+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
-+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
-+
-+			port {
-+				ov5640_ep: endpoint {
-+					remote-endpoint = <&csi_ep>;
-+					bus-width = <8>;
-+					hsync-active = <1>; /* Active high */
-+					vsync-active = <0>; /* Active low */
-+					data-active = <1>;  /* Active high */
-+					pclk-sample = <1>;  /* Rising */
-+				};
-+			};
-+		};
-+	};
-+
-+	speaker_amp: audio-amplifier {
-+		compatible = "simple-audio-amplifier";
-+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+		sound-name-prefix = "Speaker Amp";
-+	};
-+
-+	vdd_bl: regulator@0 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "bl-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+		enable-active-high;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&codec {
-+	status = "okay";
-+};
-+
-+&codec_analog {
-+	hpvcc-supply = <&reg_eldo1>;
-+	status = "okay";
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&csi {
-+	status = "okay";
-+
-+	port {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		csi_ep: endpoint {
-+			remote-endpoint = <&ov5640_ep>;
-+			bus-width = <8>;
-+			hsync-active = <1>; /* Active high */
-+			vsync-active = <0>; /* Active low */
-+			data-active = <1>;  /* Active high */
-+			pclk-sample = <1>;  /* Rising */
-+		};
-+	};
-+};
-+
-+&dai {
-+	status = "okay";
-+};
-+
-+&de {
-+	status = "okay";
-+};
-+
-+&dphy {
-+	status = "okay";
-+};
-+
-+&dsi {
-+	vcc-dsi-supply = <&reg_dldo1>;
-+	status = "okay";
-+
-+	panel@0 {
-+		compatible = "feixin,k101-im2ba02";
-+		reg = <0>;
-+		avdd-supply = <&reg_dc1sw>;
-+		dvdd-supply = <&reg_dc1sw>;
-+		cvdd-supply = <&reg_ldo_io1>;
-+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
-+		backlight = <&backlight>;
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	touchscreen@5d {
-+		compatible = "goodix,gt9271";
-+		reg = <0x5d>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
-+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
-+		AVDD28-supply = <&reg_ldo_io1>;
-+	};
-+};
-+
-+&i2c0_pins {
-+	bias-pull-up;
-+};
-+
-+&i2c1 {
-+	status = "okay";
-+
-+	/* TODO: add Bochs BMA223 accelerometer here */
-+};
-+
-+&lradc {
-+	vref-supply = <&reg_aldo3>;
-+	status = "okay";
-+
-+	button-200 {
-+		label = "Volume Up";
-+		linux,code = <KEY_VOLUMEUP>;
-+		channel = <0>;
-+		voltage = <200000>;
-+	};
-+
-+	button-400 {
-+		label = "Volume Down";
-+		linux,code = <KEY_VOLUMEDOWN>;
-+		channel = <0>;
-+		voltage = <400000>;
-+	};
-+};
-+
-+&mixer1 {
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_dcdc1>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pwm {
-+	status = "okay";
-+};
-+
-+&r_rsb {
-+	status = "okay";
-+
-+	axp803: pmic@3a3 {
-+		compatible = "x-powers,axp803";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		x-powers,drive-vbus-en;
-+	};
-+};
-+
-+#include "axp803.dtsi"
-+
-+&ac_power_supply {
-+	status = "okay";
-+};
-+
-+&battery_power_supply {
-+	status = "okay";
-+};
-+
-+&reg_aldo1 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "dovdd-csi";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-hdmi-dsi-sensor";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "avdd-csi";
-+};
-+
-+&reg_dldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
-+&reg_eldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo2 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "vcca-1v8";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "dvdd-1v8-csi";
-+};
-+
-+&reg_fldo1 {
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-1v2-hsic";
-+};
-+
-+&reg_fldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_ldo_io0 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-usb";
-+	status = "okay";
-+};
-+
-+&reg_ldo_io1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-enable-ramp-delay = <3500000>;
-+	regulator-name = "vcc-touchscreen";
-+	status = "okay";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
-+&sound {
-+	status = "okay";
-+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
-+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
-+				    "Microphone", "Internal Microphone Right",
-+				    "Headphone", "Headphone Jack",
-+				    "Speaker", "Internal Speaker";
-+	simple-audio-card,routing =
-+			"Left DAC", "AIF1 Slot 0 Left",
-+			"Right DAC", "AIF1 Slot 0 Right",
-+			"Speaker Amp INL", "LINEOUT",
-+			"Speaker Amp INR", "LINEOUT",
-+			"Internal Speaker", "Speaker Amp OUTL",
-+			"Internal Speaker", "Speaker Amp OUTR",
-+			"Headphone Jack", "HP",
-+			"AIF1 Slot 0 Left ADC", "Left ADC",
-+			"AIF1 Slot 0 Right ADC", "Right ADC",
-+			"Internal Microphone Left", "MBIAS",
-+			"MIC1", "Internal Microphone Left",
-+			"Internal Microphone Right", "HBIAS",
-+			"MIC2", "Internal Microphone Right";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pb_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_drivevbus>;
-+	usb1_vbus-supply = <&reg_ldo_io0>;
-+	status = "okay";
-+};
--- 
-2.26.2
-
-From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 14 Apr 2020 09:53:07 +0100
-Subject: [PATCH 9/9] initial pinetab support
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
- create mode 100644 configs/pinetab_defconfig
-
-diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig
-new file mode 100644
-index 0000000000..5b9620f3e5
---- /dev/null
-+++ b/configs/pinetab_defconfig
-@@ -0,0 +1,26 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I=y
-+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-+CONFIG_DRAM_CLK=552
-+CONFIG_DRAM_ZQ=3881949
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_R_I2C_ENABLE=y
-+CONFIG_SPL_SPI_SUNXI=y
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_USE_PREBOOT=y
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab"
-+CONFIG_OF_LIST="sun50i-a64-pinetab"
-+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-+CONFIG_DM_REGULATOR=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_DM_PWM=y
-+CONFIG_PWM_SUNXI=y
-+CONFIG_LED=y
-+CONFIG_LED_GPIO=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
--- 
-2.26.0

Allwinner-fix-booting-on-a-number-of-devices.patch

@@ -0,0 +1,27 @@
+From b8ea3cebde98866b7cbb4e8f9bb6dfdee529a549 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 27 Aug 2025 00:23:28 +0100
+Subject: [PATCH] Allwinner: fix booting on a number of devices
+
+Revert "sunxi: enable MMU_PGPROT proper page table protection"
+
+This reverts commit 16cfccda4dbf0b53473b8212897f5c63bfbeb6e1.
+---
+ arch/arm/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 40368abc297..b8be270e4d7 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1207,7 +1207,6 @@ config ARCH_SUNXI
+ 	select DM_SPI_FLASH if SPI && MTD
+ 	select DM_KEYBOARD
+ 	select DM_SERIAL
+-	select MMU_PGPROT if ARM64
+ 	select OF_BOARD_SETUP
+ 	select OF_CONTROL
+ 	select PINCTRL
+-- 
+2.51.0
+

Fix-NVMe-not-only-on-Raspberry-Pi-5.patch

@@ -0,0 +1,405 @@
+From patchwork Mon Jul  6 17:21:47 2026
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
+X-Patchwork-Id: 2265604
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384)
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB431Qwzz1xqc
+	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:21:55 +1000 (AEST)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 179C084942;
+	Mon,  6 Jul 2026 19:21:52 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 82ADE8490A; Mon,  6 Jul 2026 19:21:51 +0200 (CEST)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
+ RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
+ autolearn_force=no version=3.4.2
+Received: from verein.lst.de (verein.lst.de [213.95.11.211])
+ (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 9F24C846B4
+ for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:49 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
+Received: by verein.lst.de (Postfix, from userid 2005)
+ id C934268B05; Mon,  6 Jul 2026 19:21:47 +0200 (CEST)
+In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
+References: <20260706172028.C148E68BEB@verein.lst.de>
+Subject: [PATCH v2 1/4] core: Skip parent device nodes without a DT reference
+ when looking for dma-ranges
+To: Neil Armstrong <neil.armstrong@linaro.org>,
+ Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
+ Simon Glass <sjg@chromium.org>
+Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
+ Peter Robinson <pbrobinson@gmail.com>,
+ Mattijs Korpershoek <mkorpershoek@kernel.org>,
+ Marek Vasut <marek.vasut+renesas@mailbox.org>,
+ Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
+ "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
+ Martin Schwan <m.schwan@phytec.de>,
+ "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
+ Prashant Kamble <prashant.kamble223@gmail.com>,
+ Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
+ u-boot@lists.denx.de
+Message-Id: <20260706172147.C934268B05@verein.lst.de>
+Date: Mon,  6 Jul 2026 19:21:47 +0200 (CEST)
+From: duwe@lst.de (Torsten Duwe)
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+From: Torsten Duwe <duwe@suse.de>
+
+If a device node got created dynamically, there is no guarantee that the
+parent node has an associated device tree node which could specify dma
+constraints. Especially PCI(e) enumeration adds intermediate "bus nodes",
+also dynamically.
+
+Try harder to find the correct configuration by walking up the tree until
+a DT association is found.
+
+Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
+Signed-off-by: Torsten Duwe <duwe@suse.de>
+Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
+Tested-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ drivers/core/device.c | 14 +++++++++++++-
+ 1 file changed, 13 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/core/device.c b/drivers/core/device.c
+index d365204ba11..b6d00cf4714 100644
+--- a/drivers/core/device.c
++++ b/drivers/core/device.c
+@@ -459,7 +459,19 @@ static int device_get_dma_constraints(struct udevice *dev)
+ 	u64 size = 0;
+ 	int ret;
+ 
+-	if (!CONFIG_IS_ENABLED(DM_DMA) || !parent || !dev_has_ofnode(parent))
++	if (!CONFIG_IS_ENABLED(DM_DMA) || !parent)
++		return 0;
++
++	/* Look for the first node in the parent chain */
++	while (parent) {
++		if (dev_has_ofnode(parent))
++			break;
++
++		parent = dev_get_parent(parent);
++	}
++
++	/* No parents have a node, bail out */
++	if (!parent)
+ 		return 0;
+ 
+ 	/*
+
+From patchwork Mon Jul  6 17:21:50 2026
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
+X-Patchwork-Id: 2265605
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange x25519)
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB481pfXz1xqc
+	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:22:00 +1000 (AEST)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 9A59684994;
+	Mon,  6 Jul 2026 19:21:55 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id EB7D384979; Mon,  6 Jul 2026 19:21:53 +0200 (CEST)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
+ RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
+ autolearn_force=no version=3.4.2
+Received: from verein.lst.de (verein.lst.de [213.95.11.211])
+ (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id EE61C846B4
+ for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:51 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
+Received: by verein.lst.de (Postfix, from userid 2005)
+ id 464E868BEB; Mon,  6 Jul 2026 19:21:50 +0200 (CEST)
+In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
+References: <20260706172028.C148E68BEB@verein.lst.de>
+Subject: [PATCH v2 2/4] test: Add a unit test in phys_to_bus for dynamically
+ created device nodes
+To: Neil Armstrong <neil.armstrong@linaro.org>,
+ Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
+ Simon Glass <sjg@chromium.org>
+Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
+ Peter Robinson <pbrobinson@gmail.com>,
+ Mattijs Korpershoek <mkorpershoek@kernel.org>,
+ Marek Vasut <marek.vasut+renesas@mailbox.org>,
+ Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
+ "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
+ Martin Schwan <m.schwan@phytec.de>,
+ "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
+ Prashant Kamble <prashant.kamble223@gmail.com>,
+ Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
+ u-boot@lists.denx.de
+Message-Id: <20260706172150.464E868BEB@verein.lst.de>
+Date: Mon,  6 Jul 2026 19:21:50 +0200 (CEST)
+From: duwe@lst.de (Torsten Duwe)
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+From: Torsten Duwe <duwe@suse.de>
+
+In order to test whether device_get_dma_constraints() is now able to skip
+device nodes without a DT association, temporarily remove those on 2 newly-
+created nodes.
+
+Signed-off-by: Torsten Duwe <duwe@suse.de>
+---
+
+This test indeed makes a different whether the previous change is
+applied or not, but *only* reliably for the non-flat-tree case (!?).
+On the flat tree, it always fails after (reverse) applying it.
+
+Either the previous patch is incomplete, or, more likely, the test
+assumptions here are not all valid. Suggestions welcome (especially
+how to create device nodes from a device tree without a reference to
+their origin ;-)
+
+---
+ arch/sandbox/dts/test.dts |  9 +++++++++
+ test/dm/phys2bus.c        | 25 ++++++++++++++++++++++++-
+ 2 files changed, 33 insertions(+), 1 deletion(-)
+
+diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
+index 0887de4333b..1d92e85c739 100644
+--- a/arch/sandbox/dts/test.dts
++++ b/arch/sandbox/dts/test.dts
+@@ -656,6 +656,15 @@
+ 		subnode@0 {
+ 			compatible = "denx,u-boot-fdt-test";
+ 		};
++		bus@7 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			compatible = "denx,u-boot-test-bus";
++
++			subnode@8 {
++				  compatible = "denx,u-boot-fdt-test";
++			};
++		};
+ 	};
+ 
+ 	mmio-bus@1 {
+diff --git a/test/dm/phys2bus.c b/test/dm/phys2bus.c
+index 67f33904943..858ed5410e2 100644
+--- a/test/dm/phys2bus.c
++++ b/test/dm/phys2bus.c
+@@ -15,7 +15,8 @@
+ 
+ static int dm_test_phys_to_bus(struct unit_test_state *uts)
+ {
+-	struct udevice *dev;
++	struct udevice *dev, *pdev;
++	ofnode psave, nsave;
+ 	ofnode node;
+ 
+ 	node = ofnode_path("/mmio-bus@0");
+@@ -31,6 +32,29 @@ static int dm_test_phys_to_bus(struct unit_test_state *uts)
+ 	ut_asserteq_addr((void*)0x1003ffffULL, (void*)dev_phys_to_bus(dev, 0x3ffff));
+ 	ut_asserteq_addr((void*)0x3ffffULL, (void*)(ulong)dev_bus_to_phys(dev, 0x1003ffff));
+ 
++#if CONFIG_IS_ENABLED(OF_REAL)
++	/* dma-ranges are on the grandparent bus node,
++	 *  OF nodes neither here nor at parent
++	 */
++	node = ofnode_path("/mmio-bus@0/bus@7");
++	ut_assert(ofnode_valid(node));
++	ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_BUS, node, &pdev));
++
++	/* pretend the devices were discovered dynamically and have no OF node */
++	psave = pdev->node_;
++	pdev->node_.np = NULL;
++	node = ofnode_path("/mmio-bus@0/bus@7/subnode@8");
++	ut_assert(ofnode_valid(node));
++	nsave = dev->node_;
++	dev->node_.np = NULL;
++	ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_FDT, node, &dev));
++
++	ut_asserteq_addr((void *)0x1003ffffULL, (void *)dev_phys_to_bus(dev, 0x3ffff));
++	ut_asserteq_addr((void *)0x3ffffULL, (void *)(ulong)dev_bus_to_phys(dev, 0x1003ffff));
++
++	pdev->node_ = psave;
++	dev->node_ = nsave;
++#endif
+ 	return 0;
+ }
+ DM_TEST(dm_test_phys_to_bus, UTF_SCAN_PDATA | UTF_SCAN_FDT);
+
+From patchwork Mon Jul  6 17:21:54 2026
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
+X-Patchwork-Id: 2265607
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange x25519)
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB4R378Lz1xqc
+	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:22:15 +1000 (AEST)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 3FDAE8490A;
+	Mon,  6 Jul 2026 19:21:59 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 17F418490A; Mon,  6 Jul 2026 19:21:58 +0200 (CEST)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
+ RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
+ autolearn_force=no version=3.4.2
+Received: from verein.lst.de (verein.lst.de [213.95.11.211])
+ (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 1D593849A4
+ for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:56 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=lst.de
+Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
+Received: by verein.lst.de (Postfix, from userid 2005)
+ id B506B68CFE; Mon,  6 Jul 2026 19:21:54 +0200 (CEST)
+In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
+References: <20260706172028.C148E68BEB@verein.lst.de>
+Subject: [PATCH v2 4/4] configs: enable NVMe
+To: Neil Armstrong <neil.armstrong@linaro.org>,
+ Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
+ Simon Glass <sjg@chromium.org>
+Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
+ Peter Robinson <pbrobinson@gmail.com>,
+ Mattijs Korpershoek <mkorpershoek@kernel.org>,
+ Marek Vasut <marek.vasut+renesas@mailbox.org>,
+ Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
+ "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
+ Martin Schwan <m.schwan@phytec.de>,
+ "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
+ Prashant Kamble <prashant.kamble223@gmail.com>,
+ Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
+ u-boot@lists.denx.de
+Message-Id: <20260706172154.B506B68CFE@verein.lst.de>
+Date: Mon,  6 Jul 2026 19:21:54 +0200 (CEST)
+From: duwe@lst.de (Torsten Duwe)
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+From: Torsten Duwe <duwe@suse.de>
+
+Enable NVMe in the Raspberry Pi 64-Bit default config and scan for devices.
+
+Signed-off-by: Torsten Duwe <duwe@suse.de>
+Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
+Tested-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/rpi_arm64_defconfig | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
+index cdcf05ea6db..fb0fdce1d7f 100644
+--- a/configs/rpi_arm64_defconfig
++++ b/configs/rpi_arm64_defconfig
+@@ -16,7 +16,7 @@ CONFIG_BOOTSTD_DEFAULTS=y
+ CONFIG_OF_BOARD_SETUP=y
+ CONFIG_FDT_SIMPLEFB=y
+ CONFIG_USE_PREBOOT=y
+-CONFIG_PREBOOT="pci enum; usb start;"
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_DISPLAY_CPUINFO is not set
+ # CONFIG_DISPLAY_BOARDINFO is not set
+@@ -44,6 +44,7 @@ CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_BCM2835=y
+ CONFIG_MMC_SDHCI_BCMSTB=y
+ CONFIG_BCMGENET=y
++CONFIG_NVME_PCI=y
+ CONFIG_PCI_BRCMSTB=y
+ CONFIG_PINCTRL=y
+ # CONFIG_PINCTRL_GENERIC is not set

JetsonTX2-Fix-upstream-device-tree-naming.patch

@@ -0,0 +1,50 @@
+From 4ee5ba36570d94ce27e4023f15b8b3a6b8b9daf9 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Mon, 13 Oct 2025 21:41:13 +0100
+Subject: [PATCH] config: JetsonTX2: Fix upstream device tree naming
+
+The upstream naming for the Jetson TX2 is p2771-0000 so fix
+the device tree name so the firmware will find the right
+name on disk.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/dts/Makefile                                           | 2 +-
+ .../{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts}    | 0
+ configs/p2771-0000-500_defconfig                                | 2 +-
+ 3 files changed, 2 insertions(+), 2 deletions(-)
+ rename arch/arm/dts/{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts} (100%)
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 7c8cf3a5a1d..86a7b4fda35 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -134,7 +134,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += \
+ 	tegra124-venice2.dtb \
+ 	tegra124-xiaomi-mocha.dtb \
+ 	tegra186-p2771-0000-000.dtb \
+-	tegra186-p2771-0000-500.dtb \
++	tegra186-p2771-0000.dtb \
+ 	tegra210-p2371-0000.dtb \
+ 	tegra210-p2371-2180.dtb \
+ 	tegra210-p2571.dtb \
+diff --git a/arch/arm/dts/tegra186-p2771-0000-500.dts b/arch/arm/dts/tegra186-p2771-0000.dts
+similarity index 100%
+rename from arch/arm/dts/tegra186-p2771-0000-500.dts
+rename to arch/arm/dts/tegra186-p2771-0000.dts
+diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
+index 42043277e2d..e1e5c47ddfa 100644
+--- a/configs/p2771-0000-500_defconfig
++++ b/configs/p2771-0000-500_defconfig
+@@ -7,7 +7,7 @@ CONFIG_TEXT_BASE=0x80080000
+ CONFIG_NR_DRAM_BANKS=1026
+ CONFIG_ENV_SIZE=0x2000
+ CONFIG_ENV_OFFSET=0xFFFFE000
+-CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500"
++CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000"
+ CONFIG_SYS_BOOTM_LEN=0x800000
+ CONFIG_SYS_LOAD_ADDR=0x80080000
+ CONFIG_TEGRA186=y
+-- 
+2.51.0
+

USB-PD-TCPM-improvements.patch

@@ -0,0 +1,717 @@
+From patchwork Wed Feb 26 18:44:44 2025
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
+X-Patchwork-Id: 2052544
+X-Patchwork-Delegate: marek.vasut@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.a=rsa-sha256 header.s=mail header.b=IthL1Z+m;
+	dkim-atps=neutral
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature ECDSA (secp384r1))
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M03Hhjz1yCp
+	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:32 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id BFF7680FF0;
+	Wed, 26 Feb 2025 19:45:16 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.b="IthL1Z+m";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 7614F810F9; Wed, 26 Feb 2025 19:45:13 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
+ SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
+Received: from bali.collaboradmins.com (bali.collaboradmins.com
+ [IPv6:2a01:4f8:201:9162::2])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 2173180FDE
+ for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
+ s=mail; t=1740595507;
+ bh=Fnp6a8opSCXiH5NJdu5uivbBBZF3pe1CXyluh8+n8/c=;
+ h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
+ b=IthL1Z+mDeIRy9MWEa0lGyJWuHk/Pu+yUpLly7RG6NIpC0lCgla3ssiy2x+8/G+bz
+ DWjrKUMxgWtqfjfffRiKEJZ6Z2sAXJ1ePvDmMtbGoolWSrzsV2+cWh0byYrEBuVBe9
+ Vp0ye7gJ4Wt610s4QHa4xoYcm7h9KGmE3IEjb+XYFv1HMJIOoACl04BwkLctza1KBr
+ XlIqC+snvRP/yQxa2+6RYGXgQD5JnJxCM1orXVIJxyyJxTzb3XgNir60Gb4HI9724H
+ LDZy0Hq7NQ1zF0h1yVUOklDotw17isbNoI4K3JCExR+r7GsdESsGY6cwAbZY71iWlf
+ OsSSrV6TZtAMg==
+Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
+ [91.249.76.32])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange X25519 server-signature RSA-PSS (4096 bits))
+ (No client certificate requested) (Authenticated sender: sre)
+ by bali.collaboradmins.com (Postfix) with ESMTPSA id A18CC17E0881;
+ Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+Received: by jupiter.universe (Postfix, from userid 1000)
+ id 32E35480034; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
+ Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
+Cc: Tim Harvey <tharvey@gateworks.com>,
+ Philipp Tomsich <philipp.tomsich@vrull.eu>,
+ Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
+ Sebastian Reichel <sebastian.reichel@collabora.com>
+Subject: [PATCH v2 1/4] usb: tcpm: improve handling of some power-supplies
+Date: Wed, 26 Feb 2025 19:44:44 +0100
+Message-ID: <20250226184506.64114-2-sebastian.reichel@collabora.com>
+X-Mailer: git-send-email 2.47.2
+In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+When the Rock 5B is booted with the current TCPM with its power supplied
+by a "Cambrionix PDSync-C4" port it reaches the power-supply ready state.
+Once that has happened the hub starts sending GetSinkCap messages, but
+U-Boot already stopped processing PD messages. After retrying a bunch of
+times the hub instead sends soft resets. Since U-Boot will also not
+react to them, the USB hub will follow-up with a hard reset and that
+cuts off the supply voltage.
+
+Since the state machine is already prepared to handle GetSinkCap
+messages, try to avoid this by handling incoming messages for another
+50ms after reaching the ready state.
+
+Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+---
+ drivers/usb/tcpm/tcpm.c | 31 ++++++++++++++++++++++++++-----
+ 1 file changed, 26 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
+index 0aee57cb2f4a..b754b4dcd0b5 100644
+--- a/drivers/usb/tcpm/tcpm.c
++++ b/drivers/usb/tcpm/tcpm.c
+@@ -2229,6 +2229,17 @@ static int tcpm_port_init(struct udevice *dev)
+ 	return 0;
+ }
+ 
++static inline void tcpm_poll_one_event(struct udevice *dev)
++{
++	const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev);
++	struct tcpm_port *port = dev_get_uclass_plat(dev);
++
++	drvops->poll_event(dev);
++	port->poll_event_cnt++;
++	udelay(500);
++	tcpm_check_and_run_delayed_work(dev);
++}
++
+ static void tcpm_poll_event(struct udevice *dev)
+ {
+ 	const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev);
+@@ -2242,15 +2253,25 @@ static void tcpm_poll_event(struct udevice *dev)
+ 		    (port->state == SNK_READY || port->state == SRC_READY))
+ 			break;
+ 
+-		drvops->poll_event(dev);
+-		port->poll_event_cnt++;
+-		udelay(500);
+-		tcpm_check_and_run_delayed_work(dev);
++		tcpm_poll_one_event(dev);
+ 	}
+ 
+-	if (port->state != SNK_READY && port->state != SRC_READY)
++	/*
++	 * Some power-supplies send GetSinkCap shortly after they are ready.
++	 * If they do not receive a response after a few retries they will issue
++	 * a soft-reset followed by a hard reset, which kills the board power.
++	 * Let's poll for 50ms after reaching the ready state to check if the
++	 * power-supply wants something from us.
++	 */
++	if (port->state == SNK_READY) {
++		port->poll_event_cnt = 0;
++
++		while (port->poll_event_cnt < 100)
++			tcpm_poll_one_event(dev);
++	} else {
+ 		dev_warn(dev, "TCPM: exit in state %s\n",
+ 			 tcpm_states[port->state]);
++	}
+ 
+ 	/*
+ 	 * At this time, call the callback function of the respective pd chip
+
+From patchwork Wed Feb 26 18:44:45 2025
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
+X-Patchwork-Id: 2052546
+X-Patchwork-Delegate: marek.vasut@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.a=rsa-sha256 header.s=mail header.b=hgX6o5vZ;
+	dkim-atps=neutral
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature ECDSA (secp384r1))
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33MJ5sFGz1yCp
+	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:48 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 69A29811C5;
+	Wed, 26 Feb 2025 19:45:17 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.b="hgX6o5vZ";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 832B180FB9; Wed, 26 Feb 2025 19:45:14 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
+ RCVD_IN_VALIDITY_RPBL_BLOCKED,RCVD_IN_VALIDITY_SAFE_BLOCKED,
+ SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
+Received: from bali.collaboradmins.com (bali.collaboradmins.com
+ [148.251.105.195])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 2178380FF0
+ for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
+ s=mail; t=1740595507;
+ bh=H/gQCZCWVmLNRIaBLvWsE35SaDMWvta2+rTkymkHQJE=;
+ h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
+ b=hgX6o5vZwM72CR2hgo76tgo2eE00qHM7oNja381ACl8gIUUVioy8RTeqXtum89tBf
+ aIwKm/oNQNvGxy92pX5/1Jg/MwYZKS8jDukz6ZgsLKu22rJXf58FFoV095AcEkUMB2
+ lrO4KJgFW/x1FK8GmSVSXXH+iUYJLkzsfZKgHKoQYHZcVXJRgFjHR5ytGKsA/fq4el
+ 7Wrx3lmLNjL7fYlDF5AyY+Wl6hqzjDq58nFedXHv8TEHx6fzfB0IBzOL/F8bGqVcyy
+ lal7bjJvMPoA9zfgIC77R1neWktg5FSro75YciSRSj9lmMNCmESnSPCgsZ4wBW0V6f
+ ppD77gOtjDfLQ==
+Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
+ [91.249.76.32])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange X25519 server-signature RSA-PSS (4096 bits))
+ (No client certificate requested) (Authenticated sender: sre)
+ by bali.collaboradmins.com (Postfix) with ESMTPSA id 9725D17E087F;
+ Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+Received: by jupiter.universe (Postfix, from userid 1000)
+ id 34511480037; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
+ Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
+Cc: Tim Harvey <tharvey@gateworks.com>,
+ Philipp Tomsich <philipp.tomsich@vrull.eu>,
+ Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
+ Sebastian Reichel <sebastian.reichel@collabora.com>
+Subject: [PATCH v2 2/4] usb: tcpm: avoid resets for missing source capability
+ messages
+Date: Wed, 26 Feb 2025 19:44:45 +0100
+Message-ID: <20250226184506.64114-3-sebastian.reichel@collabora.com>
+X-Mailer: git-send-email 2.47.2
+In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+The current TCPM code implements source capability message handling
+according to the USB-PD specification. Unfortunately some USB PD
+sources do not properly follow the specification and do not send
+source capability messages after a soft reset when they already
+negotiated a specific contract before. The currently implemented way
+(and what is described in the specificiation) to resolve this problem
+is triggering a hard reset.
+
+But a hard reset is fatal on batteryless platforms powered via USB-C PD,
+since that removes VBUS for some time. Since this is triggered at boot
+time, the system may get stuck in a boot loop.
+
+For example I noticed the following behaviour on a Radxa Rock 5B
+combined with an affected power-supply:
+
+1. The system is booted up with current code
+2. A reboot is requested
+3. U-Boot TCPM / fusb302 driver sends soft reset and waits for the
+   source capability message
+4. No new source capability message is send by the power-supply
+   after the soft reset
+5. U-Boot sends a hard reset
+6. The board resets, but the fusb302 registers are not reset. This
+   is because of a hardware glitch. The serial pins are high when
+   no data is exchanged. Apparently the RK3588 has protection diodes,
+   which leak some voltage into the power-domain. The Rock 5B serial
+   pins and the fusb302 are using the same 3.3V power domain and the
+   leaked voltage is enough to keep the fusb302 registers alive.
+7. After the hard reset the power-supply sends another source capability
+   message, which is auto-acked by fusb302 (because the register state
+   is kept) even though the U-Boot driver has not yet probed. Once the
+   U-Boot driver probes it sends another soft reset and waits for a new
+   source capability message, which never arrives.
+
+Fortunately the affected power-supplies (I have two setups showing this
+behaviour) support sending a source capability message when explicitly
+being asked. Thus an easy workaround to handle this is deviating from
+the USB-PD specification and sending a Get_Source_Cap message and
+waiting some time longer before doing the hard reset.
+
+Note, that I recently added the same workaround to the Linux kernel
+with a slightly different rationale (since it needs to take over from
+U-Boot).
+
+Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+---
+ drivers/usb/tcpm/tcpm-internal.h |  1 +
+ drivers/usb/tcpm/tcpm.c          | 32 +++++++++++++++++++++++++++++---
+ 2 files changed, 30 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/tcpm/tcpm-internal.h b/drivers/usb/tcpm/tcpm-internal.h
+index 561442090027..4861f4d13866 100644
+--- a/drivers/usb/tcpm/tcpm-internal.h
++++ b/drivers/usb/tcpm/tcpm-internal.h
+@@ -30,6 +30,7 @@
+ 	S(SNK_DISCOVERY_DEBOUNCE),		\
+ 	S(SNK_DISCOVERY_DEBOUNCE_DONE),		\
+ 	S(SNK_WAIT_CAPABILITIES),		\
++	S(SNK_WAIT_CAPABILITIES_TIMEOUT),	\
+ 	S(SNK_NEGOTIATE_CAPABILITIES),		\
+ 	S(SNK_TRANSITION_SINK),			\
+ 	S(SNK_TRANSITION_SINK_VBUS),		\
+diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
+index b754b4dcd0b5..786d92fa4c6f 100644
+--- a/drivers/usb/tcpm/tcpm.c
++++ b/drivers/usb/tcpm/tcpm.c
+@@ -1424,7 +1424,8 @@ static inline enum tcpm_state hard_reset_state(struct tcpm_port *port)
+ 		return ERROR_RECOVERY;
+ 	if (port->pwr_role == TYPEC_SOURCE)
+ 		return SRC_UNATTACHED;
+-	if (port->state == SNK_WAIT_CAPABILITIES)
++	if (port->state == SNK_WAIT_CAPABILITIES ||
++	    port->state == SNK_WAIT_CAPABILITIES_TIMEOUT)
+ 		return SNK_READY;
+ 	return SNK_UNATTACHED;
+ }
+@@ -1650,10 +1651,35 @@ static void run_state_machine(struct udevice *dev)
+ 			tcpm_set_state(dev, SOFT_RESET_SEND,
+ 				       PD_T_SINK_WAIT_CAP);
+ 		} else {
+-			tcpm_set_state(dev, hard_reset_state(port),
+-				       PD_T_SINK_WAIT_CAP);
++			if (!port->self_powered)
++				tcpm_set_state(dev, SNK_WAIT_CAPABILITIES_TIMEOUT,
++					       PD_T_SINK_WAIT_CAP);
++			else
++				tcpm_set_state(dev, hard_reset_state(port),
++					       PD_T_SINK_WAIT_CAP);
+ 		}
+ 		break;
++	case SNK_WAIT_CAPABILITIES_TIMEOUT:
++		/*
++		 * There are some USB PD sources in the field, which do not
++		 * properly implement the specification and fail to start
++		 * sending Source Capability messages after a soft reset. The
++		 * specification suggests to do a hard reset when no Source
++		 * capability message is received within PD_T_SINK_WAIT_CAP,
++		 * but that might effectively kil the machine's power source.
++		 *
++		 * This slightly diverges from the specification and tries to
++		 * recover from this by explicitly asking for the capabilities
++		 * using the Get_Source_Cap control message before falling back
++		 * to a hard reset. The control message should also be supported
++		 * and handled by all USB PD source and dual role devices
++		 * according to the specification.
++		 */
++		if (tcpm_pd_send_control(dev, PD_CTRL_GET_SOURCE_CAP))
++			tcpm_set_state_cond(dev, hard_reset_state(port), 0);
++		else
++			tcpm_set_state(dev, hard_reset_state(port), PD_T_SINK_WAIT_CAP);
++		break;
+ 	case SNK_NEGOTIATE_CAPABILITIES:
+ 		port->pd_capable = true;
+ 		port->hard_reset_count = 0;
+
+From patchwork Wed Feb 26 18:44:46 2025
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
+X-Patchwork-Id: 2052545
+X-Patchwork-Delegate: marek.vasut@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.a=rsa-sha256 header.s=mail header.b=BxTv7Lfo;
+	dkim-atps=neutral
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384)
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M971h7z1yCp
+	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:41 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 1B09C8118B;
+	Wed, 26 Feb 2025 19:45:17 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.b="BxTv7Lfo";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 4399E810F9; Wed, 26 Feb 2025 19:45:14 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
+ SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
+Received: from bali.collaboradmins.com (bali.collaboradmins.com
+ [IPv6:2a01:4f8:201:9162::2])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 2163F80FB9
+ for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
+ s=mail; t=1740595507;
+ bh=7OaDpd2idE5ETWAiOZte0kuOU6ZYitEVWkDgDmqaQU8=;
+ h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
+ b=BxTv7LfoAae43YSXPquVPmmwStgQirXCxaSBD0fo554R5O/si/Iif5L+zXXJocATJ
+ z7+I7ZKbknkTeVyzoRDCXvXIVz2bFdTRWQN4Z2iwJbVI1covAv/Gn4wIE2Q6hbNKbU
+ qV5AKg7gvrKkbztbo7N9bHNjkrlAbd8B4Ew3SR8FM46DMAOwNzVsoX3rLMcPtlWzHj
+ 4OBKCx22H/4ASIWjMbYoDE09DyQ+CPOf8JcX8OPwFcH9j6vW6cEWvyjiAyDj6LnwOq
+ KD+ZYVIkWhkIzAkE2NHB2IpA4xlxW8i18BJzNBD8N1eBx/HCgb0camb4KanY1Hta/d
+ 4ipLyuFaCkMog==
+Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
+ [91.249.76.32])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
+ SHA256)
+ (No client certificate requested) (Authenticated sender: sre)
+ by bali.collaboradmins.com (Postfix) with ESMTPSA id 816AA17E0861;
+ Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+Received: by jupiter.universe (Postfix, from userid 1000)
+ id 361F2480038; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
+ Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
+Cc: Tim Harvey <tharvey@gateworks.com>,
+ Philipp Tomsich <philipp.tomsich@vrull.eu>,
+ Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
+ Sebastian Reichel <sebastian.reichel@collabora.com>
+Subject: [PATCH v2 3/4] usb: tcpm: print error on hard reset
+Date: Wed, 26 Feb 2025 19:44:46 +0100
+Message-ID: <20250226184506.64114-4-sebastian.reichel@collabora.com>
+X-Mailer: git-send-email 2.47.2
+In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+A USB-PD hard reset involves removing the voltage from VBUS for some
+time. So basically it has the same effect as removing the USB-C plug
+for a short moment. If the machine is powered from the USB-C port and
+does not have a fallback supply (e.g. a battery), this will result in
+a full machine reset due to power loss.
+
+Ideally we want to avoid triggering a hard reset on these boards. A
+non-working USB-C port is probably better than unplanned reboots. But
+boards with a backup supply should do the hard reset to get everything
+working again.
+
+In theory it would be enough to check the self_powered property, but
+it seems the property might not be configured consistently enough in
+system firmwares.
+
+USB-PD hard resets should happen rarely in general, so let's at least
+print an error message before the potential board reset happens. This
+is also useful, since it immediately gives away which device triggered
+the hard reset.
+
+Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+---
+ drivers/usb/tcpm/tcpm.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
+index 786d92fa4c6f..909fe2ef4fcb 100644
+--- a/drivers/usb/tcpm/tcpm.c
++++ b/drivers/usb/tcpm/tcpm.c
+@@ -1711,6 +1711,8 @@ static void run_state_machine(struct udevice *dev)
+ 
+ 	/* Hard_Reset states */
+ 	case HARD_RESET_SEND:
++		if (!port->self_powered && port->port_type == TYPEC_PORT_SNK)
++			dev_err(dev, "Initiating hard-reset, which might result in machine power-loss.\n");
+ 		tcpm_pd_transmit(dev, TCPC_TX_HARD_RESET, NULL);
+ 		tcpm_set_state(dev, HARD_RESET_START, 0);
+ 		port->wait_dr_swap_message = false;
+
+From patchwork Wed Feb 26 18:44:47 2025
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
+X-Patchwork-Id: 2052542
+X-Patchwork-Delegate: marek.vasut@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.a=rsa-sha256 header.s=mail header.b=K4mNmlOy;
+	dkim-atps=neutral
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature ECDSA (secp384r1))
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33Lk40FPz1yCp
+	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:18 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id DAFC780FF2;
+	Wed, 26 Feb 2025 19:45:12 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=pass (2048-bit key;
+ unprotected) header.d=collabora.com header.i=@collabora.com
+ header.b="K4mNmlOy";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 56A22810F9; Wed, 26 Feb 2025 19:45:11 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
+ SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
+Received: from bali.collaboradmins.com (bali.collaboradmins.com
+ [IPv6:2a01:4f8:201:9162::2])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 217E080FF2
+ for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=collabora.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
+ s=mail; t=1740595507;
+ bh=FeXZr6pfjIqGXvnsLHDigD702EmgVNH91IWVsD16udQ=;
+ h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
+ b=K4mNmlOycXzLuJnNeDxyXLVCeZWNr//ycRqDt3ld9634ThDvJ0+y49X3z2nYW+fei
+ HCqH2AoFiXj7khjiFpwCA4xOlYaTrF9yb0M9ApRxJ8vGuslNIK2k9osj8IJMoWmY8S
+ fEez4H6Wso4VamCnXKCze2G5np5mhola5QxSnIJ2CXdFP9TM1x54P+XyeJMX6IZK0X
+ lpZ0R8mACHGgXnkBASRMbo0CnLfSVrUgA83A0FHT7UgxfW8399wHol/FBakg5WS8nt
+ 47154TDW4ikoGF4dHBeD0KemJSR7I4F+nnUVQfgg8sXZKVm4yilBT+yx3WWBVCjQDl
+ 3igqfexnaUKnA==
+Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
+ [91.249.76.32])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
+ SHA256)
+ (No client certificate requested) (Authenticated sender: sre)
+ by bali.collaboradmins.com (Postfix) with ESMTPSA id 7FBB317E065A;
+ Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+Received: by jupiter.universe (Postfix, from userid 1000)
+ id 37B6A480039; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
+ Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
+Cc: Tim Harvey <tharvey@gateworks.com>,
+ Philipp Tomsich <philipp.tomsich@vrull.eu>,
+ Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
+ Sebastian Reichel <sebastian.reichel@collabora.com>
+Subject: [PATCH v2 4/4] usb: tcpm: improve data role mismatch error recovery
+Date: Wed, 26 Feb 2025 19:44:47 +0100
+Message-ID: <20250226184506.64114-5-sebastian.reichel@collabora.com>
+X-Mailer: git-send-email 2.47.2
+In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.39
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
+X-Virus-Status: Clean
+
+On Radxa ROCK 5B I managed to get U-Boot into an endless loop of
+printing
+
+fusb302 usb-typec@22: TCPM: data role mismatch, initiating error recovery
+
+messages by changing the data role in Linux and then rebooting the
+system. This is happening because the external device (A cheap USB-C hub
+powered through a USB-C PD power-supply) kept its state and the error
+recovery path for non self-powered devices is not enough to change it.
+
+Avoid this by swapping our own data role when the error recovery stage
+is reached for a port, which is not self-powered. Right now data support
+is limited anyways and once proper support is added we can use the data
+role swap request to get the desired data direction after the initial
+negotiation completed.
+
+Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+---
+ drivers/usb/tcpm/tcpm.c | 30 +++++++++++++++++++++++++++---
+ 1 file changed, 27 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
+index 909fe2ef4fcb..12d66d470f9a 100644
+--- a/drivers/usb/tcpm/tcpm.c
++++ b/drivers/usb/tcpm/tcpm.c
+@@ -833,6 +833,28 @@ static void tcpm_pd_ctrl_request(struct udevice *dev,
+ 	}
+ }
+ 
++static void tcpm_recover_data_role_mismatch(struct udevice *dev)
++{
++	struct tcpm_port *port = dev_get_uclass_plat(dev);
++
++	dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n");
++	if (port->self_powered) {
++		tcpm_set_state(dev, ERROR_RECOVERY, 0);
++		return;
++	}
++
++	/*
++	 * The error recovery will not help for devices, which are not
++	 * self-powered because the error recovery avoids killing the board
++	 * power. Since this can happen early on sending
++	 * a DR_SWAP request is not sensible. Instead let's change our own
++	 * data role. It can be swapped back once USB-PD reached the ready
++	 * state.
++	 */
++	tcpm_set_roles(dev, true, port->pwr_role,
++		       port->data_role == TYPEC_HOST ? TYPEC_DEVICE : TYPEC_HOST);
++}
++
+ static void tcpm_pd_rx_handler(struct udevice *dev,
+ 			       const struct pd_message *msg)
+ {
+@@ -867,9 +889,11 @@ static void tcpm_pd_rx_handler(struct udevice *dev,
+ 		remote_is_host = !!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE);
+ 		local_is_host = port->data_role == TYPEC_HOST;
+ 		if (remote_is_host == local_is_host) {
+-			dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n");
+-			tcpm_set_state(dev, ERROR_RECOVERY, 0);
+-		} else {
++			tcpm_recover_data_role_mismatch(dev);
++			local_is_host = port->data_role == TYPEC_HOST;
++		}
++
++		if (remote_is_host != local_is_host) {
+ 			if (cnt)
+ 				tcpm_pd_data_request(dev, msg);
+ 			else

aarch64-boards

@@ -1,23 +1,31 @@
 a64-olinuxino
+a64-olinuxino-emmc
 amarula_a64_relic
+anbernic_rg35xx_h700
+apple_m1
 bananapi_m2_plus_h5
 bananapi_m64
+beelink_gs1
 dragonboard410c
 dragonboard820c
-espresso7420
+eaidk-610-rk3399
+emlid_neutis_n5_devboard
+evb-px5
 evb-rk3328
 evb-rk3399
 ficus-rk3399
 firefly-rk3399
 geekbox
 hikey
+hmibsc
 khadas-edge-captain-rk3399
-khadas-edge-v-rk3399
 khadas-edge-rk3399
+khadas-edge-v-rk3399
 khadas-vim
 khadas-vim2
 khadas-vim3
 khadas-vim3l
+leez-rk3399
 libretech-ac
 libretech_all_h3_cc_h5
 libretech_all_h3_it_h5
@@ -28,48 +36,71 @@ mvebu_mcbin-88f8040
 nanopc-t4-rk3399
 nanopi_a64
 nanopi-k2
-nanopi-m4-rk3399
 nanopi-m4-2gb-rk3399
+nanopi-m4b-rk3399
+nanopi-m4-rk3399
 nanopi_neo2
 nanopi-neo4-rk3399
 nanopi_neo_plus2
+nanopi_r1s_h5
+nanopi-r2c-plus-rk3328
+nanopi-r2c-rk3328
+nanopi-r2s-plus-rk3328
+nanopi-r2s-rk3328
+nanopi-r4s-rk3399
+oceanic_5205_5inmfd
 odroid-c2
+orangepi_3
 orangepi_lite2
 orangepi_one_plus
 orangepi_pc2
 orangepi_prime
+orangepi-r1-plus-lts-rk3328
+orangepi-r1-plus-rk3328
 orangepi-rk3399
 orangepi_win
+orangepi_zero2
+orangepi_zero2w
+orangepi_zero3
 orangepi_zero_plus
 orangepi_zero_plus2
 p212
 p2371-2180
 p2771-0000-500
-p3450-0000
 pine64-lts
 pine64_plus
 pinebook
 pinebook-pro-rk3399
-pinephone
-pinetab
 pine_h64
+pinephone
+pinephone-pro-rk3399
+pinetab
 poplar
 puma-rk3399
+qcm6490
+qcom
+qcom_qcs8300
+qcom_qcs9100
+qemu_arm64
+qemu_arm64_lwip
+roc-cc-rk3328
+rock-4c-plus-rk3399
+rock-4se-rk3399
 rock64-rk3328
 rock960-rk3399
-rock-pi-4-rk3399
 rock-pi-4c-rk3399
+rock-pi-4-rk3399
 rock-pi-e-rk3328
+rock-pi-e-v3-rk3328
 rock-pi-n10-rk3399pro
 rockpro64-rk3399
-roc-cc-rk3328
-roc-pc-rk3399
 roc-pc-mezzanine-rk3399
-rpi_3
-rpi_4
+roc-pc-rk3399
 rpi_arm64
 sopine_baseboard
+tanix_tx6
 teres_i
+transpeed-8k618-t
 turris_mox
 vexpress_aemv8a_juno
-xilinx_zynqmp_virt
+x96_mate

arm-add-BOOTENV_EFI_SET_FDTFILE_FALLBACK-for-tegra186-be.patch

@@ -1,55 +0,0 @@
-From a63eb1bdcd25246b2c637c7846917dc6dc607725 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 18 Apr 2019 15:44:59 +0100
-Subject: [PATCH] add BOOTENV_EFI_SET_FDTFILE_FALLBACK for tegra186 because tx2
- variants
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/config_distro_bootcmd.h   | 2 ++
- include/configs/tegra186-common.h | 7 ++++++-
- 2 files changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index fc0935fa21..fd1c5f5afa 100644
---- a/include/config_distro_bootcmd.h
-+++ b/include/config_distro_bootcmd.h
-@@ -118,8 +118,10 @@
- 	  "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; "           \
- 	"fi; "
- #else
-+#ifndef BOOTENV_EFI_SET_FDTFILE_FALLBACK
- #define BOOTENV_EFI_SET_FDTFILE_FALLBACK
- #endif
-+#endif
- 
- 
- #define BOOTENV_SHARED_EFI                                                \
-diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h
-index 5c3ad35c76..d5f21e0907 100644
---- a/include/configs/tegra186-common.h
-+++ b/include/configs/tegra186-common.h
-@@ -20,6 +20,12 @@
- /* Generic Interrupt Controller */
- #define CONFIG_GICV2
- 
-+#undef FDTFILE
-+#define BOOTENV_EFI_SET_FDTFILE_FALLBACK                                  \
-+        "if test -z \"${fdtfile}\" -a -n \"${soc}\"; then "               \
-+          "setenv efi_fdtfile ${vendor}/${soc}-${board}${boardver}.dtb; "           \
-+        "fi; "
-+
- /*
-  * Memory layout for where various images get loaded by boot scripts:
-  *
-@@ -49,7 +55,6 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
--	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x82000000\0" \
- 	"ramdisk_addr_r=0x82100000\0"
- 
--- 
-2.26.0
-

arm-boards

@@ -1,142 +0,0 @@
-A10-OLinuXino-Lime
-A10s-OLinuXino-M
-A13-OLinuXino
-A13-OLinuXinoM
-A20-Olimex-SOM-EVB
-A20-OLinuXino-Lime
-A20-OLinuXino-Lime2
-A20-OLinuXino_MICRO
-am335x_evm
-am57xx_evm
-Ampe_A76
-apalis_imx6
-arndale
-Auxtek-T003
-Auxtek-T004
-ba10_tv_box
-Bananapi
-bananapi_m1_plus
-bananapi_m2_berry
-Bananapi_m2m
-bananapi_m2_plus_h3
-Bananapi_M2_Ultra
-bananapi_m2_zero
-Bananapro
-chiliboard
-CHIP
-Chuwi_V7_CW0825
-clearfog
-cm_fx6
-Colombus
-colorfly_e708_q1
-CSQ_CS908
-Cubieboard
-Cubieboard2
-Cubieboard4
-Cubietruck
-Cubietruck_plus
-db-mv784mp-gp
-difrnce_dit4350
-dserve_dsrv9703c
-evb-rk3229
-firefly-rk3288
-helios4
-Hummingbird_A31
-Hyundai_A7HD
-i12-tvbox
-icnova-a20-swac
-inet1
-iNet_3F
-iNet_3W
-inet86dz
-iNet_86VS
-inet97fv2
-inet98v_rev2
-inet9f_rev03
-inet_q972
-Itead_Ibox_A20
-jesurun_q5
-jetson-tk1
-kc1
-Lamobo_R1
-libretech_all_h3_cc_h2_plus
-Linksprite_pcDuino
-Linksprite_pcDuino3
-Linksprite_pcDuino3_Nano
-liteboard
-marsboard
-Marsboard_A10
-Mele_A1000
-Mele_A1000G_quad
-Mele_I7
-Mele_M3
-Mele_M5
-Mele_M9
-Mini-X
-mk802
-mk802_a10s
-mk802ii
-MK808C
-MSI_Primo73
-MSI_Primo81
-mx6cuboxi
-nanopi_m1
-nanopi_m1_plus
-nanopi_neo
-novena
-odroid
-odroid-xu3
-omap3_beagle
-omap4_panda
-omap5_uevm
-Orangepi
-orangepi_2
-orangepi_lite
-Orangepi_mini
-orangepi_one
-orangepi_pc
-orangepi_pc_plus
-orangepi_plus
-orangepi_plus2e
-orangepi_r1
-orangepi_zero
-origen
-paz00
-polaroid_mid2809pxe04
-pov_protab2_ips9
-q8_a13_tablet
-q8_a23_tablet_800x480
-q8_a33_tablet_1024x600
-q8_a33_tablet_800x480
-qemu_arm
-r7-tv-dongle
-riotboard
-rock
-rock-pi-n8-rk3288
-rock2
-rpi_2
-rpi_3_32b
-rpi_4_32b
-Sinlinx_SinA31s
-Sinovoip_BPI_M2
-Sinovoip_BPI_M3
-stih410-b2260
-stm32mp15_basic
-sunxi_Gemei_G9
-tbs_a711
-tinker-rk3288
-tinker-s-rk3288
-trimslice
-udoo
-udoo_neo
-usbarmory
-UTOO_P66
-vexpress_ca15_tc2
-vexpress_ca9x4
-wandboard
-warp
-warp7
-Wexler_TAB7200
-Wits_Pro_A20_DKT
-Yones_Toptech_BS1078_V2
-xilinx_zynq_virt

arm-chromebooks

@@ -1,8 +0,0 @@
-chromebit_mickey_defconfig
-chromebook_jerry_defconfig
-chromebook_minnie_defconfig
-nyan-big_defconfig
-peach-pi_defconfig
-peach-pit_defconfig
-snow_defconfig
-spring_defconfig

arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch

@@ -1,113 +0,0 @@
-From c206a750c80dc4aaa8e7eade50199b3198a3e288 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 19 Aug 2020 15:49:25 +0100
-Subject: [PATCH 1/3] rockchip: RockPro64: enable rng to provide an entropy
- source
-
-Enable the rng so UEFI can provide entropy for KASLR
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/rockpro64-rk3399_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
-index a6e2c3d71d..9b1ba04b9e 100644
---- a/configs/rockpro64-rk3399_defconfig
-+++ b/configs/rockpro64-rk3399_defconfig
-@@ -41,6 +41,8 @@ CONFIG_MMC_DW=y
- CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_SPI_FLASH_GIGADEVICE=y
- CONFIG_DM_ETH=y
- CONFIG_ETH_DESIGNWARE=y
--- 
-2.26.2
-
-From 91db3a7baa4cfc8f1f8879b4bdafeb05902f2114 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 19 Aug 2020 15:52:15 +0100
-Subject: [PATCH 2/3] rockchip: Rock960: enable rng to provide an entropy
- source
-
-Enable the rng so UEFI can provide entropy for KASLR
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/rk3399-rock960-u-boot.dtsi | 4 ++++
- configs/rock960-rk3399_defconfig        | 2 ++
- 2 files changed, 6 insertions(+)
-
-diff --git a/arch/arm/dts/rk3399-rock960-u-boot.dtsi b/arch/arm/dts/rk3399-rock960-u-boot.dtsi
-index c190089e26..08292dbd39 100644
---- a/arch/arm/dts/rk3399-rock960-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-rock960-u-boot.dtsi
-@@ -24,3 +24,7 @@
- 	};
- 
- };
-+
-+&rng {
-+	status = "okay";
-+};
-diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
-index 1d997847c2..9c4d8871b7 100644
---- a/configs/rock960-rk3399_defconfig
-+++ b/configs/rock960-rk3399_defconfig
-@@ -38,6 +38,8 @@ CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_SDMA=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_DM_ETH=y
- CONFIG_NVME=y
- CONFIG_PCI=y
--- 
-2.26.2
-
-From ac0793c7c4ee032da11bddbd0bdefee2322bb621 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 19 Aug 2020 15:53:58 +0100
-Subject: [PATCH 3/3] rockchip: firefly-rk3399: enable rng to provide an
- entropy source
-
-Enable the rng so UEFI can provide entropy for KASLR
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/rk3399-firefly-u-boot.dtsi | 4 ++++
- configs/firefly-rk3399_defconfig        | 2 ++
- 2 files changed, 6 insertions(+)
-
-diff --git a/arch/arm/dts/rk3399-firefly-u-boot.dtsi b/arch/arm/dts/rk3399-firefly-u-boot.dtsi
-index 38e0897db9..a6c7b913da 100644
---- a/arch/arm/dts/rk3399-firefly-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-firefly-u-boot.dtsi
-@@ -11,3 +11,7 @@
- 		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
- 	};
- };
-+
-+&rng {
-+	status = "okay";
-+};
-diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
-index ea4a30ebf3..e242ee5009 100644
---- a/configs/firefly-rk3399_defconfig
-+++ b/configs/firefly-rk3399_defconfig
-@@ -35,6 +35,8 @@ CONFIG_MMC_DW=y
- CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_SF_DEFAULT_SPEED=20000000
- CONFIG_DM_ETH=y
- CONFIG_ETH_DESIGNWARE=y
--- 
-2.26.2
-

arm-tegra-define-fdtfile-option-for-distro-boot.patch

@@ -1,113 +0,0 @@
-From c3332b102d2ddae01710ae8f4393a2a18a3a1bb3 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 12 May 2020 08:19:48 +0100
-Subject: [PATCH] arm: tegra: define fdtfile option for distro boot
-
-For booting via UEFI we need to define the fdtfile option so
-bootefi has the option to load a fdtfile from disk. For arm64
-the kernel dtb is located in a vendor directory so we define
-that as nvidia for that architecture.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/configs/tegra-common.h    | 6 ++++++
- include/configs/tegra114-common.h | 1 +
- include/configs/tegra124-common.h | 1 +
- include/configs/tegra186-common.h | 1 +
- include/configs/tegra20-common.h  | 1 +
- include/configs/tegra210-common.h | 1 +
- include/configs/tegra30-common.h  | 1 +
- 7 files changed, 12 insertions(+)
-
-diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
-index 175c55c613..8026f4b32e 100644
---- a/include/configs/tegra-common.h
-+++ b/include/configs/tegra-common.h
-@@ -52,6 +52,12 @@
- /* Boot Argument Buffer Size */
- #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
- 
-+#ifdef CONFIG_ARM64
-+#define FDTFILE "nvidia/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-+#else
-+#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-+#endif
-+
- /*-----------------------------------------------------------------------
-  * Physical Memory Map
-  */
-diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
-index d3a7045697..9d751b6740 100644
---- a/include/configs/tegra114-common.h
-+++ b/include/configs/tegra114-common.h
-@@ -50,6 +50,7 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x83000000\0" \
- 	"ramdisk_addr_r=0x83100000\0"
- 
-diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
-index 522993b958..0eb8f92809 100644
---- a/include/configs/tegra124-common.h
-+++ b/include/configs/tegra124-common.h
-@@ -52,6 +52,7 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x83000000\0" \
- 	"ramdisk_addr_r=0x83100000\0"
- 
-diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h
-index b4936cc731..5c3ad35c76 100644
---- a/include/configs/tegra186-common.h
-+++ b/include/configs/tegra186-common.h
-@@ -49,6 +49,7 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x82000000\0" \
- 	"ramdisk_addr_r=0x82100000\0"
- 
-diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
-index 1e31d82574..fdd8996955 100644
---- a/include/configs/tegra20-common.h
-+++ b/include/configs/tegra20-common.h
-@@ -51,6 +51,7 @@
- 	"scriptaddr=0x10000000\0" \
- 	"pxefile_addr_r=0x10100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x03000000\0" \
- 	"ramdisk_addr_r=0x03100000\0"
- 
-diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
-index 1b8e94b60c..2226effe16 100644
---- a/include/configs/tegra210-common.h
-+++ b/include/configs/tegra210-common.h
-@@ -46,6 +46,7 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x83000000\0" \
- 	"ramdisk_addr_r=0x83200000\0"
- 
-diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
-index 54bc6756ab..6c5dc24b26 100644
---- a/include/configs/tegra30-common.h
-+++ b/include/configs/tegra30-common.h
-@@ -47,6 +47,7 @@
- 	"scriptaddr=0x90000000\0" \
- 	"pxefile_addr_r=0x90100000\0" \
- 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-+	"fdtfile=" FDTFILE "\0" \
- 	"fdt_addr_r=0x83000000\0" \
- 	"ramdisk_addr_r=0x83100000\0"
- 
--- 
-2.26.2
-

disable-VBE-by-default.patch

@@ -0,0 +1,32 @@
+From d9e3a49bc2a29922da5bddd95772279f6edba802 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Fri, 18 Aug 2023 13:28:05 +0100
+Subject: [PATCH] disable VBE by default
+
+The VBE protocol needs explicit device support and as
+such isn't particularly useful by itself without that,
+it also adds size and the potential of an attack vector
+so devices that wish to use this protocol should
+explicitly opt in to it like all other large features
+in U-Boot.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ boot/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/boot/Kconfig b/boot/Kconfig
+index 30eb5b328d7..e8c3fbcb11d 100644
+--- a/boot/Kconfig
++++ b/boot/Kconfig
+@@ -635,7 +635,6 @@ config BOOTMETH_QFW
+ config BOOTMETH_VBE
+ 	bool "Bootdev support for Verified Boot for Embedded"
+ 	depends on FIT
+-	default y
+ 	select BOOTMETH_GLOBAL
+ 	select EVENT
+ 	help
+-- 
+2.49.0
+

dragonboard-fixes.patch

@@ -1,115 +0,0 @@
-From 8b0274a733cd1ce39ad9ad18e1bd8efdd02a40b7 Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Wed, 21 Jun 2017 14:21:15 -0400
-Subject: [PATCH 1/3] WIP: fix usb
-
----
- common/usb_storage.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/common/usb_storage.c b/common/usb_storage.c
-index d92ebb6eb19..9df3c3daaf4 100644
---- a/common/usb_storage.c
-+++ b/common/usb_storage.c
-@@ -1016,7 +1016,7 @@ static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss)
- 
- static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
- {
--	int retries = 10;
-+	int retries = 20;
- 
- 	do {
- 		memset(&srb->cmd[0], 0, 12);
-@@ -1039,7 +1039,7 @@ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
- 		if ((srb->sense_buf[2] == 0x02) &&
- 		    (srb->sense_buf[12] == 0x3a))
- 			return -1;
--		mdelay(100);
-+		mdelay(250);
- 	} while (retries--);
- 
- 	return -1;
--- 
-2.19.1
-
-From 7bf41d74ca9d58bc2243b7688f8987c1d373ea56 Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Mon, 3 Jul 2017 08:34:37 -0400
-Subject: [PATCH 2/3] HACK: disable emmc
-
-Hitting some timeout which makes boot take much longer.  And
-uefi/boot/rootfs partitions will be on sd-card or usb disk, etc,
-so we can just ignore emmc.
----
- arch/arm/dts/dragonboard410c.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
-index fa348bc621e..bfe7f15d5ed 100644
---- a/arch/arm/dts/dragonboard410c.dts
-+++ b/arch/arm/dts/dragonboard410c.dts
-@@ -106,6 +106,7 @@
- 			#phy-cells = <0>;
- 		};
- 
-+/*
- 		sdhci@07824000 {
- 			compatible = "qcom,sdhci-msm-v4";
- 			reg = <0x7824900 0x11c 0x7824000 0x800>;
-@@ -115,6 +116,7 @@
- 			clock = <&clkc 0>;
- 			clock-frequency = <100000000>;
- 		};
-+*/
- 
- 		sdhci@07864000 {
- 			compatible = "qcom,sdhci-msm-v4";
--- 
-2.19.1
-
-From 871fe802cf3ab593b9332c4f36ab2b3f179d51ae Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 4 Sep 2018 12:21:59 +0100
-Subject: [PATCH 3/3] add options for dm410c config
-
----
- configs/dragonboard410c_defconfig | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
-index a55abaf8df5..4ece0cafbe4 100644
---- a/configs/dragonboard410c_defconfig
-+++ b/configs/dragonboard410c_defconfig
-@@ -7,6 +7,8 @@ CONFIG_NR_DRAM_BANKS=1
- # CONFIG_ANDROID_BOOT_IMAGE is not set
- CONFIG_FIT=y
- CONFIG_OF_BOARD_SETUP=y
-+CONFIG_FAT_WRITE=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
- CONFIG_MISC_INIT_R=y
- # CONFIG_DISPLAY_CPUINFO is not set
- # CONFIG_DISPLAY_BOARDINFO is not set
-@@ -41,6 +43,13 @@ CONFIG_DM_PMIC=y
- CONFIG_PMIC_PM8916=y
- CONFIG_MSM_SERIAL=y
- CONFIG_SPMI_MSM=y
-+CONFIG_DM_ETH=y
-+CONFIG_DM_KEYBOARD=y
-+CONFIG_DM_VIDEO=y
-+# CONFG_VIDEO_BPP8 is not set
-+CONFIG_NO_FB_CLEAR=y
-+CONFIG_VIDEO_SIMPLE=y
-+CONFIG_USB_KEYBOARD=y
- CONFIG_USB=y
- CONFIG_DM_USB=y
- CONFIG_USB_EHCI_HCD=y
-@@ -57,5 +66,6 @@ CONFIG_USB_HOST_ETHER=y
- CONFIG_USB_ETHER_ASIX=y
- CONFIG_USB_ETHER_ASIX88179=y
- CONFIG_USB_ETHER_MCS7830=y
-+CONFIG_USB_ETHER_RTL8152=y
- CONFIG_USB_ETHER_SMSC95XX=y
- CONFIG_OF_LIBFDT_OVERLAY=y
--- 
-2.19.1
-

enable-bootmenu-by-default.patch

@@ -0,0 +1,49 @@
+From a956480a6d52ae90ef4a46275c2ee29a4074de36 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Fri, 18 Aug 2023 23:10:42 +0100
+Subject: [PATCH] enable bootmenu by default
+
+We want the boot menu on all Fedora devices as it makes
+it a whole lot more user friendly.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ boot/Kconfig | 2 ++
+ cmd/Kconfig  | 1 +
+ 2 files changed, 3 insertions(+)
+
+diff --git a/boot/Kconfig b/boot/Kconfig
+index 467b09e2350..ad67b1f65a6 100644
+--- a/boot/Kconfig
++++ b/boot/Kconfig
+@@ -1281,6 +1281,7 @@ config BOOTDELAY
+ 
+ config AUTOBOOT_KEYED
+ 	bool "Stop autobooting via specific input key / string"
++	default y
+ 	help
+ 	  This option enables stopping (aborting) of the automatic
+ 	  boot feature only by issuing a specific input key or
+@@ -1433,6 +1434,7 @@ config AUTOBOOT_MENUKEY
+ 
+ config AUTOBOOT_MENU_SHOW
+ 	bool "Show a menu on boot"
++	default y
+ 	depends on CMD_BOOTMENU
+ 	help
+ 	  This enables the boot menu, controlled by environment variables
+diff --git a/cmd/Kconfig b/cmd/Kconfig
+index 43ca10f69cc..3d39f2914cc 100644
+--- a/cmd/Kconfig
++++ b/cmd/Kconfig
+@@ -413,6 +413,7 @@ source lib/efi_selftest/Kconfig
+ 
+ config CMD_BOOTMENU
+ 	bool "bootmenu"
++	default y
+ 	select MENU
+ 	select CHARSET
+ 	help
+-- 
+2.41.0
+

p3450-fix-board.patch

@@ -0,0 +1,25 @@
+From c9b65320d64a60cde74c4c1f9cb4a05198a456c2 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 10 Sep 2025 13:27:52 +0100
+Subject: [PATCH] further size reductions
+
+---
+ configs/p3450-0000_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig
+index 2ebcf8b83fc..a5e717a02ed 100644
+--- a/configs/p3450-0000_defconfig
++++ b/configs/p3450-0000_defconfig
+@@ -27,6 +27,8 @@ CONFIG_CONSOLE_MUX=y
+ CONFIG_SYS_STDIO_DEREGISTER=y
+ CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # "
+ # CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_SYS_DTC_PAD_BYTES is not set
++# CONFIG_LEGACY_IMAGE_FORMAT is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+ # CONFIG_CMD_ELF is not set
+-- 
+2.51.0
+

raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch

@@ -0,0 +1,32 @@
+From 72fd4fdb54721a31d2b4e9f95fdd3b3e398bb2c0 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Sun, 12 Apr 2026 01:14:12 +0100
+Subject: [PATCH] board/raspberrypi: Add quirk for RPi5 2Gb rev 1.0
+
+All 2Gb Raspberry Pi 5s use the BCM2712D0 silicon, but
+the early boards were still rev 1.0 so we need a quirk
+to ensure the correct device tree is used.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ board/raspberrypi/rpi/rpi.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
+index b0a1484c0fa..ff9cab6521b 100644
+--- a/board/raspberrypi/rpi/rpi.c
++++ b/board/raspberrypi/rpi/rpi.c
+@@ -371,6 +371,10 @@ static void set_fdtfile(void)
+ 	const char *fdtfile;
+ 	int rev = revision & 0x0f;
+ 
++	/* 2GB Pi 5B board rev 1.0 always has BCM2712D0 silicon */
++	if (revision == 0xb04170)
++		rev = 1;
++
+ 	if (env_get("fdtfile"))
+ 		return;
+ 
+-- 
+2.53.0
+

riscv64-boards

@@ -0,0 +1,4 @@
+qemu-riscv64_spl
+sifive_unleashed
+sifive_unmatched
+starfive_visionfive2

rk3399-reset-display-hack.patch

@@ -1,46 +0,0 @@
-[HACK NOTFORMERGE] PBP: Fix panel reset
-
-On warm reset, the pinebook pro panel is not working correctly.
-The issue is not yet debugged so, for now, this hack seems to be
-enough. It toggles the GPIO1_C6 gpio [ LCDVCC_EN signal in the
-schematics ] used by the vcc3v3_panel regulator.
-
-There's no gpio_request, since the gpio is already in use at this
-stage, so it can only fail.
-Index: u-boot/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
-===================================================================
---- u-boot.orig/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
-+++ u-boot/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
-@@ -7,9 +7,12 @@
- #include <common.h>
- #include <dm.h>
- #include <syscon.h>
-+#include <linux/delay.h>
-+#include <asm/gpio.h>
- #include <asm/io.h>
- #include <asm/arch-rockchip/clock.h>
- #include <asm/arch-rockchip/grf_rk3399.h>
-+#include <asm/arch-rockchip/gpio.h>
- #include <asm/arch-rockchip/hardware.h>
- #include <asm/arch-rockchip/misc.h>
- #include <power/regulator.h>
-@@ -59,6 +62,7 @@ int misc_init_r(void)
- 	const u32 cpuid_length = 0x10;
- 	u8 cpuid[cpuid_length];
- 	int ret;
-+	unsigned int gpio;
- 
- 	setup_iodomain();
- 
-@@ -70,6 +74,11 @@ int misc_init_r(void)
- 	if (ret)
- 		return ret;
- 
-+	gpio_lookup_name("B22", NULL, NULL, &gpio);
-+	gpio_direction_output(gpio, 0);
-+	mdelay(500);
-+	gpio_direction_output(gpio, 1);
-+
- 	return ret;
- }
- #endif

rockchip-Enable-preboot-start-for-pci-usb.patch

@@ -0,0 +1,860 @@
+From a6909a16b4cc301f1007d9e75d02abb6d06a1ea7 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 28 May 2026 21:29:29 +0100
+Subject: [PATCH] rockchip: Enable preboot start for pci/usb
+
+Enable the preboot so nvme works OOTB
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/anbernic-rgxx3-rk3566_defconfig   | 2 ++
+ configs/bpi-r2-pro-rk3568_defconfig       | 2 ++
+ configs/cm3588-nas-rk3588_defconfig       | 2 ++
+ configs/coolpi-4b-rk3588s_defconfig       | 2 ++
+ configs/coolpi-cm5-evb-rk3588_defconfig   | 2 ++
+ configs/evb-rk3568_defconfig              | 2 ++
+ configs/evb-rk3588_defconfig              | 2 ++
+ configs/firefly-rk3399_defconfig          | 2 ++
+ configs/generic-rk3568_defconfig          | 2 ++
+ configs/generic-rk3588_defconfig          | 2 ++
+ configs/jaguar-rk3588_defconfig           | 2 ++
+ configs/lubancat-2-rk3568_defconfig       | 2 ++
+ configs/nanopc-t4-rk3399_defconfig        | 2 ++
+ configs/nanopc-t6-rk3588_defconfig        | 2 ++
+ configs/nanopi-r5c-rk3568_defconfig       | 2 ++
+ configs/nanopi-r5s-rk3568_defconfig       | 2 ++
+ configs/nanopi-r6c-rk3588s_defconfig      | 2 ++
+ configs/nanopi-r6s-rk3588s_defconfig      | 2 ++
+ configs/neu6a-io-rk3588_defconfig         | 2 ++
+ configs/neu6b-io-rk3588_defconfig         | 2 ++
+ configs/nova-rk3588s_defconfig            | 2 ++
+ configs/odroid-m1-rk3568_defconfig        | 2 ++
+ configs/odroid-m1s-rk3566_defconfig       | 2 ++
+ configs/odroid-m2-rk3588s_defconfig       | 2 ++
+ configs/orangepi-3b-rk3566_defconfig      | 2 ++
+ configs/orangepi-5-max-rk3588_defconfig   | 2 ++
+ configs/orangepi-5-plus-rk3588_defconfig  | 2 ++
+ configs/orangepi-5-rk3588s_defconfig      | 2 ++
+ configs/orangepi-5-ultra-rk3588_defconfig | 2 ++
+ configs/pinebook-pro-rk3399_defconfig     | 1 +
+ configs/pinetab2-rk3566_defconfig         | 2 ++
+ configs/powkiddy-x55-rk3566_defconfig     | 2 ++
+ configs/quartz64-a-rk3566_defconfig       | 2 ++
+ configs/quartz64-b-rk3566_defconfig       | 4 ++++
+ configs/quartzpro64-rk3588_defconfig      | 2 ++
+ configs/radxa-cm3-io-rk3566_defconfig     | 2 ++
+ configs/radxa-e25-rk3568_defconfig        | 2 ++
+ configs/radxa-zero-3-rk3566_defconfig     | 2 ++
+ configs/roc-pc-mezzanine-rk3399_defconfig | 2 ++
+ configs/rock-3a-rk3568_defconfig          | 2 ++
+ configs/rock-3b-rk3568_defconfig          | 2 ++
+ configs/rock-3c-rk3566_defconfig          | 2 ++
+ configs/rock-4c-plus-rk3399_defconfig     | 2 ++
+ configs/rock-4se-rk3399_defconfig         | 2 ++
+ configs/rock-5-itx-rk3588_defconfig       | 2 ++
+ configs/rock-5c-rk3588s_defconfig         | 2 ++
+ configs/rock-pi-4-rk3399_defconfig        | 2 ++
+ configs/rock-pi-4c-rk3399_defconfig       | 2 ++
+ configs/rock-pi-n10-rk3399pro_defconfig   | 2 ++
+ configs/rock5a-rk3588s_defconfig          | 2 ++
+ configs/rock5b-rk3588_defconfig           | 2 ++
+ configs/rock960-rk3399_defconfig          | 2 ++
+ configs/rockpro64-rk3399_defconfig        | 2 ++
+ configs/sige7-rk3588_defconfig            | 2 ++
+ configs/soquartz-blade-rk3566_defconfig   | 2 ++
+ configs/soquartz-cm4-rk3566_defconfig     | 2 ++
+ configs/soquartz-model-a-rk3566_defconfig | 2 ++
+ configs/tiger-rk3588_defconfig            | 2 ++
+ configs/toybrick-rk3588_defconfig         | 2 ++
+ configs/turing-rk1-rk3588_defconfig       | 2 ++
+ 60 files changed, 121 insertions(+)
+
+diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
+index 854de8b00a4..cd91f18ba80 100644
+--- a/configs/anbernic-rgxx3-rk3566_defconfig
++++ b/configs/anbernic-rgxx3-rk3566_defconfig
+@@ -12,6 +12,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ # CONFIG_EFI_LOADER is not set
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig
+index c5199a39448..603e07f2456 100644
+--- a/configs/bpi-r2-pro-rk3568_defconfig
++++ b/configs/bpi-r2-pro-rk3568_defconfig
+@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/cm3588-nas-rk3588_defconfig b/configs/cm3588-nas-rk3588_defconfig
+index 5b5ef8d5ac1..53147d115dd 100644
+--- a/configs/cm3588-nas-rk3588_defconfig
++++ b/configs/cm3588-nas-rk3588_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig
+index e6772622403..75e0b373ce9 100644
+--- a/configs/coolpi-4b-rk3588s_defconfig
++++ b/configs/coolpi-4b-rk3588s_defconfig
+@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/coolpi-cm5-evb-rk3588_defconfig b/configs/coolpi-cm5-evb-rk3588_defconfig
+index 4326e116849..a005e4441d3 100644
+--- a/configs/coolpi-cm5-evb-rk3588_defconfig
++++ b/configs/coolpi-cm5-evb-rk3588_defconfig
+@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
+index 4a5a7454e10..7ec199a08af 100644
+--- a/configs/evb-rk3568_defconfig
++++ b/configs/evb-rk3568_defconfig
+@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig
+index c7f6256a626..cfa73c660e7 100644
+--- a/configs/evb-rk3588_defconfig
++++ b/configs/evb-rk3588_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
+index 83b9de5feb9..2ba8f5029c3 100644
+--- a/configs/firefly-rk3399_defconfig
++++ b/configs/firefly-rk3399_defconfig
+@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_SPL_MAX_SIZE=0x40000
+diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig
+index a33c3af9255..20966793568 100644
+--- a/configs/generic-rk3568_defconfig
++++ b/configs/generic-rk3568_defconfig
+@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig
+index ac450e6d757..b5424ac9f16 100644
+--- a/configs/generic-rk3588_defconfig
++++ b/configs/generic-rk3588_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig
+index ed3883b4f9c..47dbd834f30 100644
+--- a/configs/jaguar-rk3588_defconfig
++++ b/configs/jaguar-rk3588_defconfig
+@@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_BASE=0xfeb50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
+index 7548bf60b06..2fb8a432503 100644
+--- a/configs/lubancat-2-rk3568_defconfig
++++ b/configs/lubancat-2-rk3568_defconfig
+@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_EFI_VAR_BUF_SIZE=16384
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
+index f8ae436a1ee..7aa8e1a8d42 100644
+--- a/configs/nanopc-t4-rk3399_defconfig
++++ b/configs/nanopc-t4-rk3399_defconfig
+@@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_SPL_MAX_SIZE=0x40000
+diff --git a/configs/nanopc-t6-rk3588_defconfig b/configs/nanopc-t6-rk3588_defconfig
+index ba9a5adece7..eaf7fa5a0fc 100644
+--- a/configs/nanopc-t6-rk3588_defconfig
++++ b/configs/nanopc-t6-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
+index e75a24dadc8..159ef033932 100644
+--- a/configs/nanopi-r5c-rk3568_defconfig
++++ b/configs/nanopi-r5c-rk3568_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="usb start;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
+index c971f376b38..60b5e8fa014 100644
+--- a/configs/nanopi-r5s-rk3568_defconfig
++++ b/configs/nanopi-r5s-rk3568_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="usb start;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/nanopi-r6c-rk3588s_defconfig b/configs/nanopi-r6c-rk3588s_defconfig
+index 861e3234d29..bb6e2082e3b 100644
+--- a/configs/nanopi-r6c-rk3588s_defconfig
++++ b/configs/nanopi-r6c-rk3588s_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/nanopi-r6s-rk3588s_defconfig b/configs/nanopi-r6s-rk3588s_defconfig
+index 743dfca441b..903ec56ad6f 100644
+--- a/configs/nanopi-r6s-rk3588s_defconfig
++++ b/configs/nanopi-r6s-rk3588s_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/neu6a-io-rk3588_defconfig b/configs/neu6a-io-rk3588_defconfig
+index 19f129e96f0..08ed699b01d 100644
+--- a/configs/neu6a-io-rk3588_defconfig
++++ b/configs/neu6a-io-rk3588_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/neu6b-io-rk3588_defconfig b/configs/neu6b-io-rk3588_defconfig
+index 2cf5aeccf51..8cafd779a1c 100644
+--- a/configs/neu6b-io-rk3588_defconfig
++++ b/configs/neu6b-io-rk3588_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/nova-rk3588s_defconfig b/configs/nova-rk3588s_defconfig
+index f7d7492ff46..5abb6ebbe18 100644
+--- a/configs/nova-rk3588s_defconfig
++++ b/configs/nova-rk3588s_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
+index b00985b0405..19d7af53c7f 100644
+--- a/configs/odroid-m1-rk3568_defconfig
++++ b/configs/odroid-m1-rk3568_defconfig
+@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/odroid-m1s-rk3566_defconfig b/configs/odroid-m1s-rk3566_defconfig
+index d59882a2a59..20f6dc3c26e 100644
+--- a/configs/odroid-m1s-rk3566_defconfig
++++ b/configs/odroid-m1s-rk3566_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/odroid-m2-rk3588s_defconfig b/configs/odroid-m2-rk3588s_defconfig
+index e71e61ddb0b..561c2b28b7a 100644
+--- a/configs/odroid-m2-rk3588s_defconfig
++++ b/configs/odroid-m2-rk3588s_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/orangepi-3b-rk3566_defconfig b/configs/orangepi-3b-rk3566_defconfig
+index 1cd78789fa1..dcf182231da 100644
+--- a/configs/orangepi-3b-rk3566_defconfig
++++ b/configs/orangepi-3b-rk3566_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/orangepi-5-max-rk3588_defconfig b/configs/orangepi-5-max-rk3588_defconfig
+index 0861df962cf..744aad89c4a 100644
+--- a/configs/orangepi-5-max-rk3588_defconfig
++++ b/configs/orangepi-5-max-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/orangepi-5-plus-rk3588_defconfig b/configs/orangepi-5-plus-rk3588_defconfig
+index 52523f87aec..e3bb4e43da9 100644
+--- a/configs/orangepi-5-plus-rk3588_defconfig
++++ b/configs/orangepi-5-plus-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/orangepi-5-rk3588s_defconfig b/configs/orangepi-5-rk3588s_defconfig
+index e0eba389289..33fe68add7b 100644
+--- a/configs/orangepi-5-rk3588s_defconfig
++++ b/configs/orangepi-5-rk3588s_defconfig
+@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/orangepi-5-ultra-rk3588_defconfig b/configs/orangepi-5-ultra-rk3588_defconfig
+index fb7f4432983..62419609695 100644
+--- a/configs/orangepi-5-ultra-rk3588_defconfig
++++ b/configs/orangepi-5-ultra-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
+index cbf95b4692f..9e4d1b1061d 100644
+--- a/configs/pinebook-pro-rk3399_defconfig
++++ b/configs/pinebook-pro-rk3399_defconfig
+@@ -22,6 +22,7 @@ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
+ CONFIG_BOOTDELAY=3
+ CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_SPL_MAX_SIZE=0x40000
+diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
+index f284dadb99d..d87849f0a45 100644
+--- a/configs/pinetab2-rk3566_defconfig
++++ b/configs/pinetab2-rk3566_defconfig
+@@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/powkiddy-x55-rk3566_defconfig b/configs/powkiddy-x55-rk3566_defconfig
+index 37a359c91a9..70bc5ab6402 100644
+--- a/configs/powkiddy-x55-rk3566_defconfig
++++ b/configs/powkiddy-x55-rk3566_defconfig
+@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
+index 780fd581f0a..7938b5c0d1b 100644
+--- a/configs/quartz64-a-rk3566_defconfig
++++ b/configs/quartz64-a-rk3566_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
+index 4d92a67cd73..fe8a168373d 100644
+--- a/configs/quartz64-b-rk3566_defconfig
++++ b/configs/quartz64-b-rk3566_defconfig
+@@ -1,4 +1,6 @@
+ CONFIG_ARM=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_SKIP_LOWLEVEL_INIT=y
+ CONFIG_COUNTER_FREQUENCY=24000000
+ CONFIG_ARCH_ROCKCHIP=y
+@@ -17,6 +19,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/quartzpro64-rk3588_defconfig b/configs/quartzpro64-rk3588_defconfig
+index 0ad74e8bbef..b9cbddfae77 100644
+--- a/configs/quartzpro64-rk3588_defconfig
++++ b/configs/quartzpro64-rk3588_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
+index 875f0b76fa5..2523dccd6a3 100644
+--- a/configs/radxa-cm3-io-rk3566_defconfig
++++ b/configs/radxa-cm3-io-rk3566_defconfig
+@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig
+index 779d540e22d..7e003e74520 100644
+--- a/configs/radxa-e25-rk3568_defconfig
++++ b/configs/radxa-e25-rk3568_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/radxa-zero-3-rk3566_defconfig b/configs/radxa-zero-3-rk3566_defconfig
+index f5cf09a5e4a..7db7e3fcd3d 100644
+--- a/configs/radxa-zero-3-rk3566_defconfig
++++ b/configs/radxa-zero-3-rk3566_defconfig
+@@ -11,6 +11,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
+index 8b4d8c1b0aa..54baa07aeae 100644
+--- a/configs/roc-pc-mezzanine-rk3399_defconfig
++++ b/configs/roc-pc-mezzanine-rk3399_defconfig
+@@ -21,6 +21,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
+index e753185610f..19d303e7f70 100644
+--- a/configs/rock-3a-rk3568_defconfig
++++ b/configs/rock-3a-rk3568_defconfig
+@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock-3b-rk3568_defconfig b/configs/rock-3b-rk3568_defconfig
+index c3bf48b9e34..0cfa8eba168 100644
+--- a/configs/rock-3b-rk3568_defconfig
++++ b/configs/rock-3b-rk3568_defconfig
+@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
+index 417aa33a663..61d0e1b8c6a 100644
+--- a/configs/rock-3c-rk3566_defconfig
++++ b/configs/rock-3c-rk3566_defconfig
+@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock-4c-plus-rk3399_defconfig b/configs/rock-4c-plus-rk3399_defconfig
+index 0f6bdfdfb06..f31cb061a83 100644
+--- a/configs/rock-4c-plus-rk3399_defconfig
++++ b/configs/rock-4c-plus-rk3399_defconfig
+@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_EFI_CAPSULE_ON_DISK=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+diff --git a/configs/rock-4se-rk3399_defconfig b/configs/rock-4se-rk3399_defconfig
+index 7f22aede912..caf8e02bece 100644
+--- a/configs/rock-4se-rk3399_defconfig
++++ b/configs/rock-4se-rk3399_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_EFI_CAPSULE_ON_DISK=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+diff --git a/configs/rock-5-itx-rk3588_defconfig b/configs/rock-5-itx-rk3588_defconfig
+index cb014de4188..e26a126533c 100644
+--- a/configs/rock-5-itx-rk3588_defconfig
++++ b/configs/rock-5-itx-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock-5c-rk3588s_defconfig b/configs/rock-5c-rk3588s_defconfig
+index 3d044a81498..27234c250d1 100644
+--- a/configs/rock-5c-rk3588s_defconfig
++++ b/configs/rock-5c-rk3588s_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig
+index e5c9072c27f..35852c017da 100644
+--- a/configs/rock-pi-4-rk3399_defconfig
++++ b/configs/rock-pi-4-rk3399_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_EFI_CAPSULE_ON_DISK=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+diff --git a/configs/rock-pi-4c-rk3399_defconfig b/configs/rock-pi-4c-rk3399_defconfig
+index 4be7b0f8130..eeee446a5bd 100644
+--- a/configs/rock-pi-4c-rk3399_defconfig
++++ b/configs/rock-pi-4c-rk3399_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_EFI_CAPSULE_ON_DISK=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
+index 602a723ea7d..3dcc2932ae3 100644
+--- a/configs/rock-pi-n10-rk3399pro_defconfig
++++ b/configs/rock-pi-n10-rk3399pro_defconfig
+@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb"
+ # CONFIG_CONSOLE_MUX is not set
+diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
+index 24b2eef35f2..c5830054921 100644
+--- a/configs/rock5a-rk3588s_defconfig
++++ b/configs/rock5a-rk3588s_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
+index da5fb3a2c30..053346fc035 100644
+--- a/configs/rock5b-rk3588_defconfig
++++ b/configs/rock5b-rk3588_defconfig
+@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
+index db121f03ae6..e55f1b6a034 100644
+--- a/configs/rock960-rk3399_defconfig
++++ b/configs/rock960-rk3399_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
+ CONFIG_SYS_PBSIZE=1052
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
+index 1d2bff35fc0..ea8e90b9f6a 100644
+--- a/configs/rockpro64-rk3399_defconfig
++++ b/configs/rockpro64-rk3399_defconfig
+@@ -20,6 +20,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_SPL_MAX_SIZE=0x40000
+diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig
+index 00b9759715b..1b837bd554c 100644
+--- a/configs/sige7-rk3588_defconfig
++++ b/configs/sige7-rk3588_defconfig
+@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_SPL_SPI=y
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig
+index 7de159a8881..4137f0459b5 100644
+--- a/configs/soquartz-blade-rk3566_defconfig
++++ b/configs/soquartz-blade-rk3566_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig
+index 4455ee5b5aa..ad63ba0204f 100644
+--- a/configs/soquartz-cm4-rk3566_defconfig
++++ b/configs/soquartz-cm4-rk3566_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
+index abdab514496..9e01345bdaa 100644
+--- a/configs/soquartz-model-a-rk3566_defconfig
++++ b/configs/soquartz-model-a-rk3566_defconfig
+@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig
+index 105e8e10e0b..bcc2ae302a5 100644
+--- a/configs/tiger-rk3588_defconfig
++++ b/configs/tiger-rk3588_defconfig
+@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
+ # CONFIG_DEBUG_UART_BOARD_INIT is not set
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig
+index 14b231ae3e2..7af393731cd 100644
+--- a/configs/toybrick-rk3588_defconfig
++++ b/configs/toybrick-rk3588_defconfig
+@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
+ CONFIG_DEBUG_UART_BASE=0xFEB50000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+diff --git a/configs/turing-rk1-rk3588_defconfig b/configs/turing-rk1-rk3588_defconfig
+index 0b3efec23e6..515db2a2b0c 100644
+--- a/configs/turing-rk1-rk3588_defconfig
++++ b/configs/turing-rk1-rk3588_defconfig
+@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEBC0000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_PCI=y
+ CONFIG_DEBUG_UART=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ CONFIG_SPL_FIT_SIGNATURE=y
+-- 
+2.54.0
+

rockchip-Rock960-Fix-up-USB-support.patch

@@ -1,66 +0,0 @@
-From aec6cfccd62e21bdb8686839a22eaff5f8cece1d Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 29 Sep 2020 13:12:15 +0100
-Subject: [PATCH] rockchip: Rock960: fix up USB support
-
-Fix up USB config options so keyboards and other USB devices work.
----
- configs/rock960-rk3399_defconfig | 9 ++++++---
- include/configs/rock960_rk3399.h | 2 ++
- 2 files changed, 8 insertions(+), 3 deletions(-)
-
-diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
-index 1d997847c2..a5a50785c5 100644
---- a/configs/rock960-rk3399_defconfig
-+++ b/configs/rock960-rk3399_defconfig
-@@ -3,12 +3,12 @@ CONFIG_ARCH_ROCKCHIP=y
- CONFIG_SYS_TEXT_BASE=0x00200000
- CONFIG_ENV_OFFSET=0x3F8000
- CONFIG_ROCKCHIP_RK3399=y
--CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
- CONFIG_TARGET_ROCK960_RK3399=y
- CONFIG_DEBUG_UART_BASE=0xFF1A0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock960"
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
- CONFIG_MISC_INIT_R=y
- CONFIG_DISPLAY_BOARDINFO_LATE=y
-@@ -41,6 +41,8 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
- CONFIG_DM_ETH=y
- CONFIG_NVME=y
- CONFIG_PCI=y
-+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-+CONFIG_PHY_ROCKCHIP_TYPEC=y
- CONFIG_PMIC_RK8XX=y
- CONFIG_REGULATOR_PWM=y
- CONFIG_REGULATOR_RK8XX=y
-@@ -54,10 +56,11 @@ CONFIG_USB_XHCI_HCD=y
- CONFIG_USB_XHCI_DWC3=y
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_EHCI_GENERIC=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_OHCI_GENERIC=y
- CONFIG_USB_DWC3=y
--CONFIG_ROCKCHIP_USB2_PHY=y
-+CONFIG_DM_KEYBOARD=y
- CONFIG_USB_KEYBOARD=y
--CONFIG_USB_GADGET=y
- CONFIG_USB_HOST_ETHER=y
- CONFIG_USB_ETHER_ASIX=y
- CONFIG_USB_ETHER_ASIX88179=y
-diff --git a/include/configs/rock960_rk3399.h b/include/configs/rock960_rk3399.h
-index c6f9122154..2edad71028 100644
---- a/include/configs/rock960_rk3399.h
-+++ b/include/configs/rock960_rk3399.h
-@@ -15,4 +15,6 @@
- 
- #define SDRAM_BANK_SIZE			(2UL << 30)
- 
-+#define CONFIG_USB_OHCI_NEW
-+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
- #endif
--- 
-2.26.2
-

rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch

@@ -0,0 +1,39 @@
+From aef38432fbc93621b434836b95b10c28aa880e84 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 9 Dec 2025 20:51:06 +0000
+Subject: [PATCH 1/2] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci
+
+The pinctrl settings are now upstream, with the upstream
+voltage supplies, and the HS200 mode is confirmed to work
+fine but the HS400 mode had reported issues so let's just
+consume what the upstream DT has now as it's all known good.
+
+Reported-by: Dusty Mabe <dusty@dustymabe.com>
+Tested-by: Dusty Mabe <dusty@dustymabe.com>
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 8 --------
+ 1 file changed, 8 deletions(-)
+
+diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
+index 64c43374c04..7e24be1a5e7 100644
+--- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
++++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
+@@ -12,14 +12,6 @@
+ 	/delete-property/ vpcie3v3-supply;
+ };
+ 
+-&sdhci {
+-	cap-mmc-highspeed;
+-	mmc-hs200-1_8v;
+-	mmc-hs400-1_8v;
+-	mmc-hs400-enhanced-strobe;
+-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+-};
+-
+ &vcc5v0_usb_host {
+ 	/delete-property/ regulator-always-on;
+ 	/delete-property/ regulator-boot-on;
+-- 
+2.52.0
+

rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch

@@ -0,0 +1,33 @@
+From 29efc0396809384cf37bfcfb01c62e63216fa998 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 9 Dec 2025 21:13:46 +0000
+Subject: [PATCH 2/2] rockchip: rk356x: Stop overriding sdhci/mmc aliases
+
+Upstream device tree has rules where the aliases are board
+specific settings, no SoC settings. Looking at upstream
+rk356x boards there's a lot of variation in the setting of
+mmc0/mmc1 based on the device so we should not be overriding
+this here and now we sync to upstream we should just consume
+those settings, to do otherwise confuses users.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/dts/rk356x-u-boot.dtsi | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
+index 738b9673d35..f25c7970208 100644
+--- a/arch/arm/dts/rk356x-u-boot.dtsi
++++ b/arch/arm/dts/rk356x-u-boot.dtsi
+@@ -7,8 +7,6 @@
+ 
+ / {
+ 	aliases {
+-		mmc0 = &sdhci;
+-		mmc1 = &sdmmc0;
+ 		spi4 = &sfc;
+ 	};
+ 
+-- 
+2.52.0
+

rockchip-spl-u-boot-itb-offset.patch

@@ -1,11 +0,0 @@
---- u-boot-2020.10/common/spl/Kconfig.orig	2020-10-07 12:08:54.972632715 +0100
-+++ u-boot-2020.10/common/spl/Kconfig	2020-10-07 12:08:59.100672506 +0100
-@@ -324,7 +324,7 @@
- 	default 0x200 if ARCH_SOCFPGA || ARCH_AT91
- 	default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
- 		         OMAP54XX || AM33XX || AM43XX || ARCH_K3
--	default 0x4000 if ARCH_ROCKCHIP
-+	default 0x200 if ARCH_ROCKCHIP
- 	default 0x822 if TARGET_SIFIVE_FU540
- 	help
- 	  Address on the MMC to load U-Boot from, when the MMC is being used

rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch

@@ -1,96 +0,0 @@
-From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 10 Aug 2020 22:20:29 +0100
-Subject: [PATCH] rpi: Use firmware provided device tree
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/rpi_0_w_defconfig      | 2 +-
- configs/rpi_2_defconfig        | 2 +-
- configs/rpi_3_32b_defconfig    | 2 +-
- configs/rpi_3_b_plus_defconfig | 2 +-
- configs/rpi_3_defconfig        | 2 +-
- configs/rpi_defconfig          | 2 +-
- 6 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
-index bba5e12b12..0241f4c6d3 100644
---- a/configs/rpi_0_w_defconfig
-+++ b/configs/rpi_0_w_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
-index 1c2bbb29ce..9573e475f4 100644
---- a/configs/rpi_2_defconfig
-+++ b/configs/rpi_2_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
-index b8a3d17f43..252df994e6 100644
---- a/configs/rpi_3_32b_defconfig
-+++ b/configs/rpi_3_32b_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig
-index 4c361438fa..3b2996a2f9 100644
---- a/configs/rpi_3_b_plus_defconfig
-+++ b/configs/rpi_3_b_plus_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
-index 9b281a4f15..1e9ee6122e 100644
---- a/configs/rpi_3_defconfig
-+++ b/configs/rpi_3_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
-index b5ad53c37b..223fc03275 100644
---- a/configs/rpi_defconfig
-+++ b/configs/rpi_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
--- 
-2.26.2
-

rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch

@@ -0,0 +1,256 @@
+From patchwork Tue Aug  4 13:39:15 2026
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Gregor Herburger <gregor.herburger@linutronix.de>
+X-Patchwork-Id: 2280865
+X-Patchwork-Delegate: pbrobinson@gmail.com
+Return-Path: <u-boot-bounces@lists.u-boot-project.org>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@legolas.ozlabs.org
+Authentication-Results: legolas.ozlabs.org;
+	dkim=fail reason="signature verification failed" (2048-bit key;
+ unprotected) header.d=lists.u-boot-project.org
+ header.i=@lists.u-boot-project.org header.a=rsa-sha256 header.s=default
+ header.b=DFFhfbAr;
+	dkim-atps=neutral
+Authentication-Results: legolas.ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.u-boot-project.org
+ (client-ip=2605:bc80:3010::136; helo=smtp3.osuosl.org;
+ envelope-from=u-boot-bounces@lists.u-boot-project.org;
+ receiver=patchwork.ozlabs.org)
+Received: from smtp3.osuosl.org (smtp3.osuosl.org [IPv6:2605:bc80:3010::136])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384)
+	(No client certificate requested)
+	by legolas.ozlabs.org (Postfix) with ESMTPS id 4hDvm8025rz1xqD
+	for <incoming@patchwork.ozlabs.org>; Tue, 04 Aug 2026 23:39:35 +1000 (AEST)
+Received: from localhost (localhost [127.0.0.1])
+	by smtp3.osuosl.org (Postfix) with ESMTP id 2536960600;
+	Tue,  4 Aug 2026 13:39:34 +0000 (UTC)
+X-Virus-Scanned: amavis at osuosl.org
+Received: from smtp3.osuosl.org ([127.0.0.1])
+ by localhost (smtp3.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP
+ id T9Kb3BtsvOX4; Tue,  4 Aug 2026 13:39:33 +0000 (UTC)
+X-Comment: SPF check N/A for local connections - client-ip=140.211.166.142;
+ helo=lists1.osuosl.org;
+ envelope-from=u-boot-bounces@lists.u-boot-project.org; receiver=<UNKNOWN>
+DKIM-Filter: OpenDKIM Filter v2.11.0 smtp3.osuosl.org 4350560615
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
+	d=lists.u-boot-project.org ; s=default; t=1785850773;
+	bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
+	h=From:Date:Subject:To:Cc:List-Id:List-Unsubscribe:List-Archive:
+	 List-Post:List-Help:List-Subscribe:From;
+	b=DFFhfbArDuHrxJEuZryw3QEVVVcavwAril7tcxulQVs6jkVOCAjh7GEuhkq8EyLIq
+	 suopR14b5dkKpVbbSr23u2v9jRgpynJQ5WBq6kIJSqjmZt58tZeMbaX76PRHjOs8+s
+	 QHatP0Vxf1ny0BOpVlZLZ/LlAsQhypNhW6/qjH0X9OLeNq0IFjSZ5faD3z463b62m0
+	 yMuPrAXa/kuPPInxGG6HsCPkRzFH3x9hM15r7ipSbXODTRXaVBSVScp03eAeo6zw/d
+	 nll/wcjCEe/78XX5o1Tsug951g7H8meDRnGQHJZtvbEmHdDB1wkTXYdFI2EGwnDxsz
+	 W3dcHoUveJgqQ==
+Received: from lists1.osuosl.org (lists1.osuosl.org [140.211.166.142])
+	by smtp3.osuosl.org (Postfix) with ESMTP id 4350560615;
+	Tue,  4 Aug 2026 13:39:33 +0000 (UTC)
+X-Original-To: u-boot@lists.u-boot-project.org
+Delivered-To: u-boot@lists.u-boot-project.org
+Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138])
+ by lists1.osuosl.org (Postfix) with ESMTP id 3009E2BF
+ for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:31 +0000 (UTC)
+Received: from localhost (localhost [127.0.0.1])
+ by smtp1.osuosl.org (Postfix) with ESMTP id 222DC8086C
+ for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:31 +0000 (UTC)
+X-Virus-Scanned: amavis at osuosl.org
+Received: from smtp1.osuosl.org ([127.0.0.1])
+ by localhost (smtp1.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP
+ id W5OoNRat257d for <u-boot@lists.u-boot-project.org>;
+ Tue,  4 Aug 2026 13:39:30 +0000 (UTC)
+X-Greylist: delayed 94239 seconds by postgrey-1.37 at util1.osuosl.org;
+ Tue, 04 Aug 2026 13:39:29 UTC
+DMARC-Filter: OpenDMARC Filter v1.4.2 smtp1.osuosl.org 1B0B580827
+DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org 1B0B580827
+Received-SPF: Pass (mailfrom) identity=mailfrom;
+ client-ip=2a0a:51c0:0:12e:550::1; helo=galois.linutronix.de;
+ envelope-from=gregor.herburger@linutronix.de; receiver=<UNKNOWN>
+Received: from galois.linutronix.de (Galois.linutronix.de
+ [IPv6:2a0a:51c0:0:12e:550::1])
+ by smtp1.osuosl.org (Postfix) with ESMTPS id 1B0B580827
+ for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:29 +0000 (UTC)
+From: Gregor Herburger <gregor.herburger@linutronix.de>
+Date: Tue, 04 Aug 2026 15:39:15 +0200
+Subject: [PATCH v3] rpi: copy /chosen/bootloader partition and set
+ boot_partition
+MIME-Version: 1.0
+Message-Id: <20260804-tryboot2-v3-1-b0bc282a923b@linutronix.de>
+X-B4-Tracking: v=1; b=H4sIAILrcWoC/22OywrCMBBFf0WyNpKHbYor/0O6SNOJjWgiSRpaS
+ v/dpCKCyKwO3HvmLiiANxDQabcgD8kE42wGvt8hNUh7BWz6zIgRVpOGcBz93DkXGW5UxRjlooZ
+ Kohx/etBm2lSX9s1h7G6gYumXhPbugePgQX6VgjQfJU4U5+OSHiVIpQU9340do3fWTIceimIwI
+ To/b3MTK6/+LEssezhRRFDNAGj142nXdX0BG/Mh6/kAAAA=
+X-Change-ID: 20260803-tryboot2-8c5221376e5a
+To: u-boot@lists.u-boot-project.org
+Cc: Matthias Brugger <mbrugger@suse.com>,
+  Peter Robinson <pbrobinson@gmail.com>, Tom Rini <trini@konsulko.com>,
+	=?utf-8?q?Filip_Kokosi=C5=84ski?= <filip.kokosinski@gmail.com>,
+  Ilias Apalodimas <ilias.apalodimas@linaro.org>,
+  Gregor Herburger <gregor.herburger@linutronix.de>
+X-Developer-Signature: v=1; a=ed25519-sha256; t=1785850764; l=3191;
+ i=gregor.herburger@linutronix.de; s=20260226; h=from:subject:message-id;
+ bh=4mVT/kFDHBnjUUlqljWBZ+t7aLa+t+gE+t/hUJ4uc5g=;
+ b=TBKoGScdkXGUfpGLvpVtYHkg4LDoOR/8M/do2dqU2QlR+9Z9YFNN6x88pDC7UIDeXrJS+Hpeg
+ e3YsfK6fOcoBgXOuzz3Aabmmn9//OQN7WG6Vz15rSxX0uVZ96TFcvf5
+X-Developer-Key: i=gregor.herburger@linutronix.de; a=ed25519;
+ pk=u72Lv7+/lS5CC1hmSrb17lv/6CK7HBh4Lvz77PHA5LM=
+X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
+ d=linutronix.de; s=2020; t=1785850765;
+ h=from:from:reply-to:subject:subject:date:date:message-id:message-id:
+ to:to:cc:cc:mime-version:mime-version:content-type:content-type:
+ content-transfer-encoding:content-transfer-encoding;
+ bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
+ b=plU5oAFojHvTlDhOGINsdXnnc0AnS9OY0C4LB9dSy9uyrPKBBpLWGWj3xmNoX87lLZlhO9
+ z0H+R5gqw5NfxbTVYFHqZnW+pW4xJQFW9fMYSU8/k2RRg9JEqP+NrZ8Y720ujlycxn05vP
+ sF7cD+TEsxvyBhnbRyq82obvpdQIYj0D6T3UkHyz0U4G+5k8dVhhv/mqGaSfY8xW4cCl5G
+ gIE2QIsuzB4g4pQoW70DrLd7cyqqDM0iDrrXFZL2a7DlnYgbe1ULVXMl05UMMQGfBkHmog
+ pt8e+zvO4AVA3G8CKcUQhhWOZm7uycUpdrNuyPKg9K7JB6MEd9dHbucVa+v8Yg==
+X-Mailman-Original-DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed;
+ d=linutronix.de; s=2020e; t=1785850765;
+ h=from:from:reply-to:subject:subject:date:date:message-id:message-id:
+ to:to:cc:cc:mime-version:mime-version:content-type:content-type:
+ content-transfer-encoding:content-transfer-encoding;
+ bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
+ b=NAMrZHs0ETYIMiwBHLvCoR3NOcg/kwkAxVRq6Q/pdhfkQJjxtHU3mZFV520QjbE1yeix0S
+ nJyAqHgyKVlRiZCw==
+X-Mailman-Original-Authentication-Results: smtp1.osuosl.org;
+ dmarc=pass (p=none dis=none)
+ header.from=linutronix.de
+X-Mailman-Original-Authentication-Results: smtp1.osuosl.org;
+ dkim=pass (2048-bit key, unprotected) header.d=linutronix.de
+ header.i=@linutronix.de header.a=rsa-sha256 header.s=2020 header.b=plU5oAFo;
+ dkim=pass header.d=linutronix.de header.i=@linutronix.de
+ header.a=ed25519-sha256 header.s=2020e header.b=NAMrZHs0
+X-BeenThere: u-boot@lists.u-boot-project.org
+X-Mailman-Version: 2.1.30
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.u-boot-project.org>
+List-Unsubscribe: <https://lists.u-boot-project.org/mailman/options/u-boot>,
+ <mailto:u-boot-request@lists.u-boot-project.org?subject=unsubscribe>
+List-Archive: <http://lists.u-boot-project.org/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.u-boot-project.org>
+List-Help: <mailto:u-boot-request@lists.u-boot-project.org?subject=help>
+List-Subscribe: <https://lists.u-boot-project.org/mailman/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.u-boot-project.org?subject=subscribe>
+Errors-To: u-boot-bounces@lists.u-boot-project.org
+Sender: "U-Boot" <u-boot-bounces@lists.u-boot-project.org>
+
+The Raspberry Pi has the "tryboot" feature where it can boot from a
+different partition enabling failsafe A/B updates. After boot the
+firmware sets 'partition' property in /chosen/bootloader.
+
+Copy the /chosen/bootloader node to the device tree.
+
+Set the env variable boot_partition accordingly to allow boards to
+create a bootcmd based on the boot partition.
+
+Reviewed-by: Matthias Brugger <mbrugger@suse.com>
+Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
+---
+Changes in v3:
+- Copy the complete '/chosen/bootloader' node instead of only the
+  partition property
+- Link to v2: https://patch.msgid.link/20260803-tryboot2-v2-1-30c071f2ee15@linutronix.de
+
+Changes in v2:
+- update Reviewed-by tag
+---
+ board/raspberrypi/rpi/rpi.c | 51 +++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 51 insertions(+)
+
+
+---
+base-commit: baa64b2f892890f00a377eac4a3e685472bb56b5
+change-id: 20260803-tryboot2-8c5221376e5a
+
+Best regards,
+--  
+Gregor Herburger <gregor.herburger@linutronix.de>
+
+diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
+index 1da5df92351c..ba8a2c1ba4cf 100644
+--- a/board/raspberrypi/rpi/rpi.c
++++ b/board/raspberrypi/rpi/rpi.c
+@@ -480,6 +480,20 @@ static void set_serial_number(void)
+ 	env_set("serial#", serial_string);
+ }
+ 
++static void set_boot_partition_fdt(void)
++{
++	void *fdtp = (void *)gd->fdt_blob;
++	u32 partition;
++
++	partition = fdt_getprop_u32_default(fdtp, "/chosen/bootloader", "partition", 1);
++	if (!partition) {
++		printf("Failed to the get partition property.\n");
++		return;
++	}
++
++	env_set_ulong("boot_partition", partition);
++}
++
+ int misc_init_r(void)
+ {
+ 	set_fdt_addr();
+@@ -489,6 +503,7 @@ int misc_init_r(void)
+ 	set_board_info();
+ #endif
+ 	set_serial_number();
++	set_boot_partition_fdt();
+ 
+ 	return 0;
+ }
+@@ -579,6 +594,39 @@ int board_fdt_blob_setup(void **fdtp)
+ 	return 0;
+ }
+ 
++int copy_node_all_properties(void *dst, void *src, const char *path, const char *node)
++{
++	int src_parent, dst_parent;
++	int src_node, dst_node;
++	int prop;
++	int len;
++
++	src_parent = fdt_path_offset(src, path);
++	dst_parent = fdt_path_offset(dst, path);
++	if (src_parent < 0 || dst_parent < 0)
++		return -1;
++
++	src_node = fdt_subnode_offset(src, src_parent, node);
++	if (src_node < 0)
++		return -1;
++
++	dst_node = fdt_find_or_add_subnode(dst, dst_parent, node);
++	if (dst_node < 0)
++		return -1;
++
++	fdt_for_each_property_offset(prop, src, src_node) {
++		const char *name;
++		const void *value = fdt_getprop_by_offset(src, prop, &name, &len);
++
++		if (!value || !name)
++			continue;
++
++		fdt_setprop(dst, dst_node, name, value, len);
++	}
++
++	return 0;
++}
++
+ int copy_property(void *dst, void *src, char *path, char *property)
+ {
+ 	int dst_offset, src_offset;
+@@ -641,6 +689,9 @@ void  update_fdt_from_fw(void *fdt, void *fw_fdt)
+ 
+ 	/* copy uart clk as provided by the firmware */
+ 	copy_property(fdt, fw_fdt, "/clocks/clk-uart", "clock-frequency");
++
++	/* Copy the bootloader node */
++	copy_node_all_properties(fdt, fw_fdt, "/chosen", "bootloader");
+ }
+ 
+ int ft_board_setup(void *blob, struct bd_info *bd)

sources

@@ -1 +1 @@
-SHA512 (u-boot-2020.10.tar.bz2) = fd26534f2d72ffc3167919c32067c550636f6a4ee5fead6937e2583ba4ff6165e88b8b50fbbddde7354a8c42701433d0cb2ce982e43c014db60b08415288baf9
+SHA512 (u-boot-v2026.10-rc3.tar.bz2) = e993f5d78a1ac0eb11f00e3730ff23eb880e206036f78c3eb74852b846a23d59111b4b07f4ced2c88c61a8c1627036c3cc32717c0efcf819376c5cd0a34183d2

uboot-tools.spec

@@ -1,595 +1,573 @@
-#global candidate rc5
+%global candidate rc3
+%if 0%{?rhel}
+%bcond_with toolsonly
+%else
+%bcond_without toolsonly
+%endif
+
+# Set it to "opensbi" (stable) or "opensbi-unstable" (unstable, git)
+%global opensbi opensbi
 
 Name:     uboot-tools
-Version:  2020.10
-Release:  2%{?candidate:.%{candidate}}%{?dist}
+Version:  2026.10
+Release:  0.3%{?candidate:.%{candidate}}%{?dist}
+Epoch:    1
 Summary:  U-Boot utilities
-License:  GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
-URL:      http://www.denx.de/wiki/U-Boot
+# Automatically converted from old format: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ - review is highly recommended.
+License:  GPL-2.0-or-later AND LicenseRef-Callaway-BSD AND LGPL-2.1-or-later AND LGPL-2.0-or-later
+URL:      https://u-boot-project.org/
+ExcludeArch: s390x
+Source0:  https://git.u-boot-project.org/u-boot/u-boot/-/archive/v%{version}%{?candidate:-%{candidate}}/u-boot-v%{version}%{?candidate:-%{candidate}}.tar.bz2
+Source1:  aarch64-boards
+Source2:  riscv64-boards
+Source3:  x86_64-boards
 
-Source0:  ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
-Source1:  arm-boards
-Source2:  arm-chromebooks
-Source3:  aarch64-boards
-Source4:  aarch64-chromebooks
-Source5:  10-devicetree.install
+# Fedora patches to enable/disable features
+Patch1:   disable-VBE-by-default.patch
+Patch2:   enable-bootmenu-by-default.patch
+# This is now legacy, most devices use bootflow, we keep this for the laggards
+Patch3:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
+# Identify VFAT partitions as ESP, allows EFI setvar on our images
+Patch4:   uefi-Add-all-options-for-EFI-System-Partitions.patch
+# New function to find fdt for loading from disk
+Patch5:   uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch
+# Enable UEFI SetVariable for devices without backed storage
+Patch6:   uefi-enable-SetVariableRT-with-volotile-storage.patch
+# Enable UEFI HTTPS boot for all Fedora firmware
+Patch7:   uefi-enable-https-boot-by-default.patch
 
-# Fedoraisms patches
-# Needed to find DT on boot partition that's not the first partition
-Patch1:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
-# Needed due to issues with shim
-Patch2:   uefi-use-Fedora-specific-path-name.patch
-Patch3:   rockchip-spl-u-boot-itb-offset.patch
-
-# Board fixes and enablement
-# RPi - uses RPI firmware device tree for HAT support
-Patch5:   rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
-# Tegra improvements
-Patch6:   arm-tegra-define-fdtfile-option-for-distro-boot.patch
-Patch7:   arm-add-BOOTENV_EFI_SET_FDTFILE_FALLBACK-for-tegra186-be.patch
-# AllWinner improvements
-Patch8:   AllWinner-UpstreamSync.patch
-Patch9:   AllWinner-PinePhone.patch
-Patch10:  AllWinner-PineTab.patch
-Patch11:  0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch
-# TI fixes
-Patch12:  0001-Fix-BeagleAI-detection.patch
+# Device improvments
+# USB-PD improvements
+Patch10:  USB-PD-TCPM-improvements.patch
 # Rockchips improvements
-Patch13:  arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch
-Patch14:  rk3399-Pinebook-pro-EDP-support.patch
-Patch15:  rk3399-reset-display-hack.patch
-Patch16:  rockchip-Rock960-Fix-up-USB-support.patch
+Patch11:  rockchip-Enable-preboot-start-for-pci-usb.patch
+Patch13:  rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch
+# Jetson fixes
+Patch14:  p3450-fix-board.patch
+Patch15:  JetsonTX2-Fix-upstream-device-tree-naming.patch
+# Fix AllWinner
+Patch16:  Allwinner-fix-booting-on-a-number-of-devices.patch
+# RPi
+Patch20:  Fix-NVMe-not-only-on-Raspberry-Pi-5.patch
+Patch21:  raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch
+Patch22:  rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch
 
 BuildRequires:  bc
+BuildRequires:  bison
 BuildRequires:  dtc
-BuildRequires:  make
-# Requirements for building on el7
-%if 0%{?rhel} == 7
-BuildRequires:  devtoolset-7-build
-BuildRequires:  devtoolset-7-binutils
-BuildRequires:  devtoolset-7-gcc
-BuildRequires:  python2-devel
-BuildRequires:  python2-setuptools
-BuildRequires:  python2-libfdt
-%else
+BuildRequires:  flex
 BuildRequires:  gcc
+BuildRequires:  gnutls-devel
+BuildRequires:  libuuid-devel
+BuildRequires:  make
+BuildRequires:  ncurses-devel
+%if 0%{?fedora} > 44
+BuildRequires:  openssl3-devel
+BuildRequires:  openssl3-devel-engine
+%else
+BuildRequires:  openssl-devel
+BuildRequires:  openssl-devel-engine
+%endif
+BuildRequires:  perl-interpreter
 BuildRequires:  python3-devel
 BuildRequires:  python3-setuptools
 BuildRequires:  python3-libfdt
-%endif
-BuildRequires:  flex bison
-BuildRequires:  openssl-devel
-BuildRequires:  SDL-devel
+BuildRequires:  SDL2-devel
 BuildRequires:  swig
-%ifarch %{arm} aarch64
-BuildRequires:  vboot-utils
-%endif
+%if %{with toolsonly}
 %ifarch aarch64
 BuildRequires:  arm-trusted-firmware-armv8
+BuildRequires:  optee-os-firmware-armv8
+BuildRequires:  crust-firmware
+BuildRequires:  python3-pyelftools
+BuildRequires:  xxd
+%endif
+%ifarch riscv64
+BuildRequires:  %{opensbi}
+%endif
 %endif
-
 Requires:       dtc
-Requires:       systemd
-%ifarch aarch64 %{arm}
-Obsoletes:      uboot-images-elf < 2019.07
-Provides:       uboot-images-elf < 2019.07
-%endif
 
 %description
 This package contains a few U-Boot utilities - mkimage for creating boot images
 and fw_printenv/fw_setenv for manipulating the boot environment variables.
 
+%if %{with toolsonly}
 %ifarch aarch64
 %package     -n uboot-images-armv8
 Summary:     U-Boot firmware images for aarch64 boards
-Requires:    uboot-tools
 BuildArch:   noarch
 
 %description -n uboot-images-armv8
 U-Boot firmware binaries for aarch64 boards
 %endif
 
-%ifarch %{arm}
-%package     -n uboot-images-armv7
-Summary:     U-Boot firmware images for armv7 boards
-Requires:    uboot-tools
+%ifarch riscv64
+%package     -n uboot-images-riscv64
+Summary:     U-Boot firmware images for riscv64 boards
 BuildArch:   noarch
 
-%description -n uboot-images-armv7
-U-Boot firmware binaries for armv7 boards
+%description -n uboot-images-riscv64
+U-Boot firmware binaries for riscv64 boards
+%endif
+
+%ifarch x86_64
+%package     -n uboot-images-x86_64
+Summary:     U-Boot firmware images for x86_64 boards
+BuildArch:   noarch
+
+%description -n uboot-images-x86_64
+U-Boot firmware binaries for x86_64 boards
+%endif
 %endif
 
 %prep
-%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}
+%autosetup -p1 -n u-boot-v%{version}%{?candidate:-%{candidate}}
 
-cp %SOURCE1 %SOURCE2 %SOURCE3 %SOURCE4 .
+cp %SOURCE1 %SOURCE2 %SOURCE3 .
 
 %build
 mkdir builds
 
-%if 0%{?rhel} == 7
-#Enabling DTS for .el7
-%{?enable_devtoolset7:%{enable_devtoolset7}}
+%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
+%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/
+
+%if %{with toolsonly}
+# OpenSBI firmware is distributed in U-Boot SPL images
+%ifarch riscv64
+export OPENSBI=%{_datadir}/%{opensbi}/generic/firmware/fw_dynamic.bin
 %endif
 
-%ifarch aarch64 %{arm}
+%ifarch aarch64 riscv64 x86_64
 for board in $(cat %{_arch}-boards)
 do
   echo "Building board: $board"
   mkdir builds/$(echo $board)/
+
   # ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
-  sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i)
+  sun50i=(a64-olinuxino a64-olinuxino-emmc amarula_a64_relic bananapi_m64 nanopi_a64 oceanic_5205_5inmfd orangepi_win pine64-lts pine64_plus pine64_plus pinebook pinephone pinephone pinetab sopine_baseboard teres_i)
   if [[ " ${sun50i[*]} " == *" $board "* ]]; then
     echo "Board: $board using sun50i_a64"
-    cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
+    cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31
+    cp /usr/share/crust-firmware/a64/scp.bin builds/$(echo $board)/
   fi
-  sun50h6=(orangepi_lite2 orangepi_one_plus pine_h64)
+  sun50h5=(bananapi_m2_plus_h5 emlid_neutis_n5_devboard libretech_all_h3_cc_h5 libretech_all_h3_it_h5 libretech_all_h5_cc_h5 nanopi_neo2 nanopi_neo_plus2 nanopi_r1s_h5 orangepi_pc2 orangepi_prime orangepi_zero_plus2 orangepi_zero_plus)
+  if [[ " ${sun50h5[*]} " == *" $board "* ]]; then
+    echo "Board: $board using sun50i_h6"
+    cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31
+    cp /usr/share/crust-firmware/h5/scp.bin builds/$(echo $board)/
+  fi
+  sun50h6=(beelink_gs1 emlid_neutis_n5_devboard orangepi_3 orangepi_lite2 orangepi_one_plus pine_h64 tanix_tx6)
   if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
     echo "Board: $board using sun50i_h6"
-    cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
+    cp /usr/share/arm-trusted-firmware/sun50i_h6/bl31.bin builds/$(echo $board)/atf-bl31
+    cp /usr/share/crust-firmware/h6/scp.bin builds/$(echo $board)/
   fi
-  rk3328=(evb-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328)
+  sun50i_h616=(anbernic_rg35xx_h700 orangepi_zero2 orangepi_zero2w orangepi_zero3 transpeed-8k618-t x96_mate)
+  if [[ " ${sun50i_h616[*]} " == *" $board "* ]]; then
+    echo "Board: $board using sun50i_h616"
+    cp /usr/share/arm-trusted-firmware/sun50i_h616/bl31.bin builds/$(echo $board)/atf-bl31
+  fi
+  rk3328=(evb-rk3328 generic-rk3328 nanopi-r2c-plus-rk3328 nanopi-r2c-rk3328 nanopi-r2s-rk3328 nanopi-r2s-plus-rk3328 orangepi-r1-plus-lts-rk3328 orangepi-r1-plus-rk3328 roc-cc-rk3328 rock64-rk3328 rock-pi-e-rk3328 rock-pi-e-v3-rk3328)
   if [[ " ${rk3328[*]} " == *" $board "* ]]; then
     echo "Board: $board using rk3328"
-    cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
+    cp /usr/share/arm-trusted-firmware/rk3328/bl31.elf builds/$(echo $board)/atf-bl31
   fi
-  rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 orangepi-rk3399 pinebook-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
+  rk3368=(evb-px5 geekbox)
+  if [[ " ${rk3368[*]} " == *" $board "* ]]; then
+    echo "Board: $board using rk3368"
+    cp /usr/share/arm-trusted-firmware/rk3368/bl31.elf builds/$(echo $board)/atf-bl31
+  fi
+  rk3399=(eaidk-610-rk3399 evb-rk3399 ficus-rk3399 firefly-rk3399 generic-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 pinephone-pro-rk3399 puma-rk3399 rock-4c-plus-rk3399 rock-4se-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
   if [[ " ${rk3399[*]} " == *" $board "* ]]; then
     echo "Board: $board using rk3399"
     cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
+    cp builds/$(echo $board)/bl31.elf builds/$(echo $board)/atf-bl31
+  fi
+  zynqmp=(xilinx_zynqmp_kria xilinx_zynqmp_virt)
+  if [[ " ${zynqmp[*]} " == *" $board "* ]]; then
+    echo "Board: $board using zynqmp"
+    cp /usr/share/arm-trusted-firmware/zynqmp/bl31.bin builds/$(echo $board)/atf-bl31
   fi
   # End ATF
+
   make $(echo $board)_defconfig O=builds/$(echo $board)/
-  %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/
+  BL31=builds/$(echo $board)/atf-bl31 %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/
+
 done
 
 %endif
-
-%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
-%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/
+%endif
 
 %install
-mkdir -p $RPM_BUILD_ROOT%{_bindir}
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
-mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/
+mkdir -p %{buildroot}%{_bindir}
+mkdir -p %{buildroot}%{_mandir}/man1
+mkdir -p %{buildroot}%{_datadir}/uboot/
 
+%if %{with toolsonly}
 %ifarch aarch64
-for board in $(cat %{_arch}-boards)
+for board in $(ls builds)
 do
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
- for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img spl/boot.bin spl/sunxi-spl.bin
+ for file in u-boot.bin u-boot.img u-boot-dtb.img u-boot-sunxi-with-spl.bin u-boot-rockchip-spi.bin u-boot-rockchip.bin
  do
   if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
+  fi
+ done
+done
+
+# Just for xilinx_zynqmp
+for board in "xilinx_zynqmp_kria xilinx_zynqmp_virt"
+do
+ for file in u-boot.itb spl/boot.bin
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
+  fi
+ done
+done
+
+# For Apple M-series we also need the nodtb variant
+install -pD -m 0644 builds/apple_m1/u-boot-nodtb.bin %{buildroot}%{_datadir}/uboot/apple_m1/u-boot-nodtb.bin
+%endif
+
+%ifarch riscv64
+for board in $(ls builds)
+do
+ for file in u-boot.itb spl/u-boot-spl.bin spl/u-boot-spl.bin.normal.out
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
   fi
  done
 done
 %endif
 
-%ifarch %{arm}
-for board in $(cat %{_arch}-boards)
+%ifarch x86_64
+for board in $(ls builds)
 do
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
- for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-rockchip.bin u-boot-sunxi-with-spl.bin spl/boot.bin
+ for file in u-boot.rom
  do
   if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
   fi
  done
-
 done
+%endif
 
 # Bit of a hack to remove binaries we don't use as they're large
-for board in $(cat %{_arch}-boards)
+for board in $(ls builds)
 do
-  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
-    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.*
+  rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.dtb
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.*
   fi
-  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/MLO ]; then
-    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
-  fi
-  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/SPL ]; then
-    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
-  fi
-  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
-    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-rockchip.bin ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.*
   fi
 done
 %endif
 
-for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes
+for tool in dumpimage env/fw_printenv fdt_add_pubkey fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc ifwitool img2srec kwboot mkeficapsule mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder
 do
-install -p -m 0755 builds/tools/$tool $RPM_BUILD_ROOT%{_bindir}
+install -p -m 0755 builds/tools/$tool %{buildroot}%{_bindir}
+done
+for tool in dumpimage kwboot mkeficapsule mkimage
+do
+install -p -m 0644 doc/$tool.1 %{buildroot}%{_mandir}/man1
 done
-install -p -m 0644 doc/mkimage.1 $RPM_BUILD_ROOT%{_mandir}/man1
 
-install -p -m 0755 builds/tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
-( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf fw_printenv fw_setenv )
-
-install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir}
-
-# systemd kernel-install script for device tree
-mkdir -p $RPM_BUILD_ROOT/lib/kernel/install.d/
-install -p -m 0755 %{SOURCE5} $RPM_BUILD_ROOT/lib/kernel/install.d/
-
-# Copy sone useful docs over
-mkdir -p builds/docs
-cp -p board/hisilicon/hikey/README builds/docs/README.hikey
-cp -p board/hisilicon/hikey/README builds/docs/README.hikey
-cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
-cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
-cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
-cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
-cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
-cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
-cp -p board/ti/am335x/README builds/docs/README.am335x
-cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
-cp -p board/udoo/README builds/docs/README.udoo
-cp -p board/wandboard/README builds/docs/README.wandboard
-cp -p board/warp/README builds/docs/README.warp
-cp -p board/warp7/README builds/docs/README.warp7
+install -p -m 0755 builds/tools/env/fw_printenv %{buildroot}%{_bindir}
+( cd %{buildroot}%{_bindir}; ln -sf fw_printenv fw_setenv )
 
 %files
-%doc README doc/README.kwbimage doc/README.distro doc/README.gpt
-%doc doc/README.odroid doc/README.rockchip doc/uefi doc/uImage.FIT doc/arch/arm64.rst
-%doc doc/README.chromium builds/docs/*
-%doc doc/board/amlogic/ doc/board/rockchip/
+%license Licenses/*
+%doc README doc/develop/distro.rst doc/README.gpt
+%doc doc/develop/uefi doc/usage doc/arch/arm64.rst
 %{_bindir}/*
+%{_mandir}/man1/dumpimage.1*
+%{_mandir}/man1/kwboot.1*
+%{_mandir}/man1/mkeficapsule.1*
 %{_mandir}/man1/mkimage.1*
-/lib/kernel/install.d/10-devicetree.install
-%dir %{_datadir}/uboot/
-%config(noreplace) %{_sysconfdir}/fw_env.config
 
+%if %{with toolsonly}
 %ifarch aarch64
 %files -n uboot-images-armv8
+%license Licenses/*
+%dir %{_datadir}/uboot/
 %{_datadir}/uboot/*
 %endif
 
-%ifarch %{arm}
-%files -n uboot-images-armv7
+%ifarch riscv64
+%files -n uboot-images-riscv64
+%license Licenses/*
+%dir %{_datadir}/uboot/
 %{_datadir}/uboot/*
 %endif
 
+%ifarch x86_64
+%files -n uboot-images-x86_64
+%license Licenses/*
+%dir %{_datadir}/uboot/
+%{_datadir}/uboot/*
+%endif
+%endif
+
 %changelog
-* Wed Oct 28 08:21:56 GMT 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-2
-- Fix kernel installs for non EBBR systems
-- Fix for wired networks on some Allwinner devices
+* Thu Aug 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.3.rc3
+- Update to 2026.10 RC3
 
-* Tue Oct 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-1
-- Update to 2020.10
+* Wed Aug 12 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.2.rc2
+- Update to 2026.10 RC2
 
-* Sun Sep 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.6.rc5
-- Initial support for display output on Pinebook Pro
+* Thu Jul 30 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.1.rc1
+- Update to 2026.10 RC1
+- Update source URL
 
-* Tue Sep 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.5.rc5
-- Update to 2020.10 RC5
+* Fri Jul 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1:2026.07-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild
 
-* Wed Sep 09 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.4.rc4
-- Update to 2020.10 RC4
+* Tue Jul 07 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-1
+- Update to 2026.07 GA
 
-* Wed Aug 19 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.3.rc2
-- Enable a number of new Rockchip devices
+* Tue Jun 23 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.4.rc5
+- Update to 2026.07 RC5
 
-* Mon Aug 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.2.rc2
-- Update to 2020.10 RC2
+* Mon Jun 08 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.3.rc4
+- Update to 2026.07 RC4
 
-* Tue Jul 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.1.rc1
-- 2020.10 RC1
+* Fri May 29 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.2.rc3
+- Update to 2026.07 RC3
+- Update U-Boot Project URL
+- Update RPi PCIe patches
+- Various RPi fixes
 
-* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 2020.07-2
-- Use make macros
-- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
+* Fri May 01 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.1.rc1
+- Update to 2026.07 RC1
 
-* Mon Jul 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-1
-- 2020.07 GA
+* Sat Apr 11 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-2
+- Fix PCIe/USB on Raspberry Pi 4 (rhbz#2448365)
+- Fix detection of some revisions of RPi5
 
-* Tue Jun 23 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.5.rc5
-- 2020.07 RC5
+* Tue Apr 07 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-1
+- Update to 2026.04 GA
 
-* Thu Jun 18 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.4.rc4
-- Update various patches to latest upstream
+* Sun Mar 29 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.9.rc5
+- Enable NVME booting on RPi5
 
-* Wed Jun 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.3.rc4
-- 2020.07 RC4
-- Minor updates and other fixes
+* Tue Mar 24 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.8.rc5
+- Update to 2026.04 RC5
 
-* Tue May 12 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.2.rc2
-- 2020.07 RC2
-- Minor device updates
+* Sat Mar 14 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.7.rc4
+- Raspberry Pi fixes
 
-* Wed Apr 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.1.rc1
-- 2020.07 RC1
+* Tue Mar 10 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.6.rc4
+- Update to 2026.04 RC4
 
-* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-4
-- Initial support for USB on Rasperry Pi 4
+* Fri Feb 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.5.rc3
+- Update to 2026.04 RC3
 
-* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-3
-- Ship u-boot-rockchip.bin for SPI flash
+* Tue Feb 17 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.4.rc2
+- Add initial bcm2712d0 identification
 
-* Mon Apr 20 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-2
-- Fix ATF for new aarch64 devices
-- Fix Wandboard board detection (rhbz 1825247)
-- Fix mSD card on RockPro64
-- Enable (inital) Pinebook Pro
+* Mon Feb 09 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.3.rc2
+- Update to 2026.04 RC2
 
-* Tue Apr 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-1
-- 2020.04
+* Tue Jan 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.2.rc1
+- Update to 2026.04 RC1
 
-* Tue Apr  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.7-rc5
-- 2020.04 RC5
+* Mon Jan 19 2026 Javier Martinez Canillas <javierm@redhat.com> - 1:2026.01-3
+- Add a uboot-images-x86_64 subpackage
 
-* Tue Mar 31 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.6-rc4
-- 2020.04 RC4
-- Updates for NVIDIA Jetson platforms
-- Support RNG for random seed for KASLR on some Rockchip devices
+* Sat Jan 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1:2026.01-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
 
-* Thu Mar 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.5-rc3
-- Fix ext4 alignment issue seen on some NXP i.MX devices
+* Tue Jan 06 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-1
+- Update to 2026.01 GA
 
-* Wed Feb 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.4-rc3
-- 2020.04 RC3
+* Mon Dec 29 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.4.rc5
+- Update to 2026.01 RC5
 
-* Thu Feb 13 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.3-rc2
-- 2020.04 RC2
+* Mon Dec 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.3.rc4
+- Update to 2026.01 RC4
 
-* Sun Feb  2 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.2-rc1
-- Update genet NIC driver
+* Fri Nov 28 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.2.rc3
+- Updates for RPi
 
-* Wed Jan 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.1-rc1
-- 2020.04 RC1
+* Mon Nov 24 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.1.rc3
+- Update to 2026.01 RC3
 
-* Tue Jan  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-1
-- 2020.01
+* Thu Oct 16 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-2
+- Drop residual Rockchip firmware (saves ~150Mb)
 
-* Tue Dec 17 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.9-rc5
-- 2020.01 RC5
+* Mon Oct 13 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-1
+- Update to 2025.10 GA (rhbz#2401964)
+- Fix booting when using FW device-tree (rhbz#2402498)
+- Fix for some variants of Raspberry Pi
+- Fixes for Jetson device booting
 
-* Thu Dec 12 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.8-rc4
-- Fixes for Raspberry Pi
+* Fri Sep 26 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.7.rc5
+- Update to 2025.10 RC5
 
-* Thu Dec  5 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.7-rc4
-- Enable the Khadas Edge and VIM series of devices
-- Minor other fixes
+* Mon Sep 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.6.rc4
+- Update to 2025.10 RC4
 
-* Tue Dec  3 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.6-rc4
-- Fixes for AllWinner, Raspberry Pi, Rockchip, Xilinx ZynqMP
+* Sun Sep 07 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.5.rc3
+- Boot fixes for some Raspberry Pi variants
 
-* Tue Dec  3 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.5-rc4
-- 2020.01 RC4
+* Wed Aug 27 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.4.rc3
+- Fix booting on some Allwinner devices
 
-* Tue Nov 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.4-rc3
-- 2020.01 RC3
+* Mon Aug 25 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.3.rc3
+- Update to 2025.10 RC3
 
-* Tue Nov 12 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.3-rc2
-- 2020.01 RC2
+* Tue Aug 19 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.2.rc2
+- Fix and re-enable Jetson Nano
 
-* Tue Nov  5 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.2-rc1
-- Include new ATF 2.2
+* Mon Aug 18 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.1.rc2
+- Update to 2025.10 RC2
 
-* Wed Oct 30 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.1-rc1
-- 2020.01 RC1
-- Initial migration to python3
+* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:2025.07-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
 
-* Wed Oct  9 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-2
-- Fixes for Rockchips rk3328 and rk3399 platforms
+* Thu Jul 10 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-2
+- Update patch for rebase issue
 
-* Mon Oct  7 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-1
-- 2019.10
+* Wed Jul 09 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-1
+- Update to 2025.07 GA
 
-* Mon Sep 23 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.5-rc4
-- 2019.10 RC4
+* Fri Jun 27 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.5.rc5
+- Update to 2025.07 RC5
+- Enable LWIP stack by default
+- Enable HTTP(s) boot support
 
-* Wed Sep 11 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.4-rc3
-- Minor fixes
+* Thu Jun 26 2025 Javier Martinez Canillas <javierm@redhat.com> - 1:2025.07-0.4.rc4
+- Add EFI_PARTITION_INFO_PROTOCOL support
 
-* Tue Aug 27 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.3-rc3
-- 2019.10 RC3
+* Sun Jun 15 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.3.rc4
+- Update to 2025.07 RC4
 
-* Mon Aug 26 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.2-rc2
-- Temporarily disable Chrome devices due to unexpected retirement of vboot-utils
+* Tue May 13 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.2.rc2
+- Update to 2025.07 RC2
 
-* Wed Aug 14 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.1-rc2
-- 2019.10 RC2
+* Thu May 01 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.1.rc1
+- Update to 2025.07 RC1
 
-* Sun Aug  4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-3
-- Fixes for Rock960
-- Iniital Raspberry Pi 4 support
+* Sun Apr 20 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-2
+- Fix for RPi5 serial console
 
-* Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2019.07-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+* Tue Apr 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-1
+- Update to 2025.04 GA
 
-* Mon Jul  8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-1
-- 2019.07
-- Enable Rock64
-- Rock960 enhancements
+* Tue Mar 25 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.7.rc5
+- Update to 2025.04 RC5
 
-* Fri Jun 28 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-0.2-rc4
-- Fix build with explicit python2
-- Drop a couple of unused boards
+* Wed Mar 12 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.6.rc4
+- Update to 2025.04 RC4
 
-* Tue Jun 18 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-0.1-rc4
-- 2019.07 RC4
-- Obsolete unused elf packages
-- A number of new rk3399 devices
+* Wed Feb 26 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.5.rc3
+- Update to 2025.04 RC3
 
-* Sat May  4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-2
-- Build and ship pre built SD/SPI SPL bits for all rk3399 boards
+* Tue Feb 18 2025 David Abdurachmanov <davidlt@rivosinc.com> - 1:2025.04-0.4.rc2
+- Add support for riscv64
 
-* Sun Apr 14 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-1
-- 2019.04
-- Fixes for AllWinner and NVIDIA Jetson devices
+* Tue Feb 11 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.3.rc2
+- Update to 2025.05 RC2
 
-* Thu Apr  4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.9-rc4
-- Latest Tegra patch revision
+* Tue Feb 11 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.2.rc1
+- Update to 2025.05 RC1
 
-* Sun Mar 31 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.8-rc4
-- Add ability to make creation of boot/dtb symlink configurable
+* Tue Jan 28 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-3
+- Add new fdt_add_pubkey tool
 
-* Sun Mar 24 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.7-rc4
-- Minor UEFI fixes, Tegra Jetson TX series rebase
+* Sun Jan 19 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:2025.01-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
 
-* Wed Mar 20 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.6-rc4
-- Tegra Jetson TX-series improvements
+* Tue Jan 07 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-1
+- Update to 2025.01 GA
 
-* Tue Mar 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.5-rc4
-- 2019.04 RC4
+* Mon Jan 06 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-0.2.rc6
+- Rebuild for TF-A 2.12
 
-* Tue Mar  5 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.4-rc3
-- 2019.04 RC3
+* Tue Dec 31 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-0.1.rc6
+- Update to 2025.01 RC6
 
-* Tue Feb 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.3-rc2
-- 2019.04 RC2
+* Fri Oct 11 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-1
+- Update to 2024.10 GA
+- Fix passing RPi firmware CMA setting to kernel DT
+- Update Geekbox
 
-* Sat Feb  9 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.2-rc1
-- Build against new ATF snapshot
+* Thu Oct 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.8.rc6
+- Pass CMA FW setting through to kernel DT for Raspberry Pi
 
-* Fri Feb  8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.1-rc1
-- 2019.04 RC1
+* Tue Oct 01 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.7.rc6
+- Update to 2024.10 RC6
 
-* Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2019.01-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+* Mon Sep 16 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.6.rc5
+- Update to 2024.10 RC5
 
-* Tue Jan 15 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-1
-- 2019.01
+* Fri Sep  6 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.5.rc4
+- Add missing licenses directory
 
-* Tue Jan  8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.4-rc3
-- 2019.01 RC3
+* Tue Sep 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.4.rc4
+- Update to 2024.10 RC4
 
-* Tue Dec 18 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.3-rc2
-- 2019.01 RC2
+* Mon Sep 02 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.3.rc3
+- Fix Allwinner firmware chainloading (rhbz#2309138)
+- Fix ATF firmware selection on a number of devices
+- Support Allwinner SCP firmware (fixes suspend/resume)
 
-* Wed Dec 12 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.2-rc1
-- ATF tweaks and fixes
-- Enable amarula_a64_relic, nanopi_a64, puma-rk3399
+* Tue Aug 27 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.2.rc3
+- Update to 2024.10 RC3
+- Enable initial QCM6490 SoC support
 
-* Tue Dec  4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.1-rc1
-- 2019.01 RC1
-- Enable new devices
+* Thu Aug 15 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.1.rc2
+- Update to 2024.10 RC2
 
-* Tue Dec  4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.11-1
-- 2018.11
-- Build with ATF 2.0
-- Fix Hummingboard and CuBox-i devices
+* Tue Jul 23 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-1
+- Update to 2024.07
 
-* Tue Oct 30 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.11-0.1.rc3
-- 2018.11 RC3
+* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:2024.07-0.3.rc4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
 
-* Sun Sep 30 2018 Pablo Greco <pablo@fliagreco.com.ar>
-- Added conditional to enable devtoolset-7-gcc for .el7 build (Arrfab)
-- Added conditional BR, python2-pyelftools is python-pyelftools in .el7 (Arrfab)
+* Tue Jun 18 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-0.2.rc4
+- Update to 2024.07 RC4
 
-* Sun Sep 23 2018 Peter Robinson <pbrobinson@fedoraproject.org>
-- Update Rock960 patches, enable Rock960 Enterprise Edition (ficus)
+* Sat May 25 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-0.1.rc3
+- Update to 2024.07 RC3
 
-* Mon Sep 10 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-1
-- 2018.09
+* Wed Apr 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-1
+- Update to 2024.04 GA
+- Rockchip rk3328 USB fixes
 
-* Tue Sep  4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.4.rc3
-- 2018.09 RC3
-- Enable nanopi_neo_plus2, pine_h64, rock960-rk3399, a64-olinuxino
-- Build against new upstream AllWinner ATF support
-- Use firmware provided DT on Raspberry Pi
-- Support for Pine64-LTS
+* Wed Mar 27 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.8.rc5
+- Update to 2024.04 RC5
 
-* Tue Aug 14 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.2.rc2
-- 2018.09 RC2
-- Improve Jetson TX1 support
-- Enable OrangePi 1+ and Avnet Ultra96
+* Thu Mar 21 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.7.rc4
+- Updated patch for DTB loading
 
-* Tue Jul 31 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.1.rc1
-- 2018.09 RC1
+* Fri Mar 15 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.6.rc4
+- Updated fix for FDT load
 
-* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2018.07-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+* Wed Mar 13 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.5.rc4
+- Fixes for Rockchip rk3399 autoboot
 
-* Mon Jul  9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-1
-- 2018.07
+* Tue Mar 12 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.4.rc4
+- Update to 2024.04 RC4
+- Initial fix for loading DT off /boot (rhbz 2247873)
 
-* Tue Jul  3 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.4.rc3
-- 2018.07 RC3
+* Thu Feb 29 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.3.rc3
+- Update to 2024.04 RC3
+- Enable a number of new upstream devices
+- Upstream now builds Rockchip SPI artifacts
+- Various cleanups
+- Fix ESP partition detection to enable EFI vars
 
-* Wed Jun 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.3.rc2
-- 2018.07 RC2
-- Enable Helios4
+* Wed Feb 14 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.2.rc2
+- Update to 2024.04 RC2
 
-* Fri Jun  8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.2.rc1
-- Update sunxi MMC patch series, Tegra Nyan patch, SolidRun i.MX6 SoM rev 1.5 patch
+* Sat Jan 27 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:2024.01-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
 
-* Tue Jun  5 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.1.rc1
-- 2018.07 RC1
-- Enable Turris Mox, BananaPi m2 Berry, some Libretech boards
-
-* Mon May  7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-1
-- 2018.05 GA
-
-* Wed May  2 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.5.rc3
-- Build Xilnix ZynqMP zcu100 (96boards Ultra96)
-
-* Tue May  1 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.4.rc3
-- 2018.05 RC3
-
-* Thu Apr 26 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.3.rc2
-- uEFI improvements
-- Fixes for Rockchips rk33xx 64 bit devices
-- Build AllWinner 64 bit devices against new ATF
-
-* Tue Apr 17 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.2.rc2
-- 2018.05 RC2
-- Enable Raspberry Pi option to use firmware DT
-
-* Sun Apr  8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.1.rc1
-- 2018.05 RC1
-
-* Fri Apr  6 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-4
-- Improvements for Raspberry Pi, AllWinner MMC perf, mvebu devices
-
-* Tue Mar 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-3
-- Fix issue with certain MMC cards on Raspberry Pi
-
-* Fri Mar 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-2
-- Add support for Raspberry Pi 3+
-
-* Tue Mar 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-1
-- 2018.03 GA
-
-* Fri Mar  9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.11.rc4
-- Enable support for Jetson TX2
-
-* Thu Mar  8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.10.rc4
-- Fix for Raspberry Pi 2 boot
-
-* Wed Mar  7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.9.rc4
-- 2018.03 RC4
-- Fixes for Raspberry Pi 3 boot
-- Minor kernel install fixes
-- Enable am335x_evm_usbspl for Beagle Pocket
-- DragonBoard patch rebase
-
-* Sun Mar  4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.8.rc3
-- Add support for SoM rev 1.5 to mx6cuboxi
-- Rebuild for new ATF 1.5 rc0 release
-
-* Sun Feb 25 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.7.rc3
-- Build 64 bit Rockchips FIT images with ARM Trusted Firmware
-
-* Tue Feb 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.6.rc3
-- 2018.03 RC3
-
-* Fri Feb 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.5.rc2
-- A few upstream fixes
-
-* Thu Feb 15 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.4.rc2
-- Fix for GBps network on some AllWinner devices
-
-* Tue Feb 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.3.rc2
-- 2018.03 RC2
-
-* Wed Feb  7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.2.rc1
-- Update uEFI patches
-
-* Tue Jan 30 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.1.rc1
-- 2018.03 RC1
-
-* Tue Jan  9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.01-1
-- 2018.01
+* Mon Jan 08 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.01-1
+- Update to 2024.01

uefi-Add-all-options-for-EFI-System-Partitions.patch

@@ -0,0 +1,57 @@
+From 86782e882e9542f5f402e00cd87efb36ad0552d3 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Sat, 2 Mar 2024 11:17:42 +0000
+Subject: [PATCH v4] disk: dos: Add all options for EFI System Partitions
+
+The EFI spec states that the ESP can be any of FAT12/16/32 but for
+compatibility doesn't necssarily require the partition to be the
+EFI partition table ID of 0xef. A number of arm devices will not
+find their firmware on a FAT partition with an ID of 0xef so also
+allow the original FAT12/16/32 partition IDs as they are also
+permissable for an ESP.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+
+v2:
+- Add 0x0c option
+- Make hex constants consistent
+- Move from if to switch statement
+v3:
+- Fix switch brain fart
+v4:
+- Drop boot_ind out of switch
+
+ disk/part_dos.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+diff --git a/disk/part_dos.c b/disk/part_dos.c
+index 567ead7511d..a35181dff4f 100644
+--- a/disk/part_dos.c
++++ b/disk/part_dos.c
+@@ -40,10 +40,21 @@ static int get_bootable(dos_partition_t *p)
+ {
+ 	int ret = 0;
+ 
+-	if (p->sys_ind == 0xef)
++	switch (p->sys_ind) {
++	case 0x01:
++	case 0x06:
++	case 0x0b:
++	case 0x0c:
++	case 0xef:
+ 		ret |= PART_EFI_SYSTEM_PARTITION;
++		break;
++	default:
++		break;
++	}
++
+ 	if (p->boot_ind == 0x80)
+ 		ret |= PART_BOOTABLE;
++
+ 	return ret;
+ }
+ 
+-- 
+2.44.0
+

uefi-distro-load-FDT-from-any-partition-on-boot-device.patch

@@ -1,7 +1,7 @@
-From 67c05a07288ef24b3ac9d013f35a0868d26a34c7 Mon Sep 17 00:00:00 2001
+From 4306c538d4a00dd1aa46c55c3c4005c2b0bf7cd5 Mon Sep 17 00:00:00 2001
 From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 18 Jun 2019 11:51:21 +0100
-Subject: [PATCH 1/2] distro: load FDT from any partition on boot device
+Date: Thu, 24 Nov 2022 12:57:55 +0000
+Subject: [PATCH] distro: load FDT from any partition on boot device
 
 In the EFI_LOADER boot path, we were only checking the FAT partition
 containing the EFI payload for dtb files.  But this is somewhat of a
@@ -22,14 +22,14 @@ knows) and SoC/board specific ${fdtfile} (which grub does not know).
 Signed-off-by: Rob Clark <robdclark@gmail.com>
 Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
 ---
- include/config_distro_bootcmd.h | 34 ++++++++++++++++++++++-----------
- 1 file changed, 23 insertions(+), 11 deletions(-)
+ include/config_distro_bootcmd.h | 37 +++++++++++++++++++++------------
+ 1 file changed, 24 insertions(+), 13 deletions(-)
 
 diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index 4993303f4d..f4b3b62fca 100644
+index fcb319a20ae..e71004fad9c 100644
 --- a/include/config_distro_bootcmd.h
 +++ b/include/config_distro_bootcmd.h
-@@ -138,25 +138,37 @@
+@@ -155,28 +155,39 @@
  		"fi\0"                                                    \
  	\
  	"load_efi_dtb="                                                   \
@@ -44,13 +44,16 @@ index 4993303f4d..f4b3b62fca 100644
 +	"scan_dev_for_dtb="                                               \
  		"setenv efi_fdtfile ${fdtfile}; "                         \
  		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
+ 		BOOTENV_RUN_EXTENSION_INIT                                \
 -		"for prefix in ${efi_dtb_prefixes}; do "                  \
 -			"if test -e ${devtype} "                          \
 -					"${devnum}:${distro_bootpart} "   \
 -					"${prefix}${efi_fdtfile}; then "  \
 -				"run load_efi_dtb; "                      \
+-				BOOTENV_RUN_EXTENSION_APPLY               \
 -			"fi;"                                             \
 -		"done;"                                                   \
+-		"run boot_efi_bootmgr;"                                   \
 +		"part list ${devtype} ${devnum} dtb_devplist; "           \
 +		"env exists dtb_devplist || setenv dtb_devplist "         \
 +			"${distro_bootpart}; "                            \
@@ -64,6 +67,7 @@ index 4993303f4d..f4b3b62fca 100644
 +						"${devnum}:${dtb_devp} "  \
 +						"${prefix}${efi_fdtfile};"\
 +					"run load_efi_dtb; "              \
++					BOOTENV_RUN_EXTENSION_APPLY       \
 +				"fi;"                                     \
 +			"done; "                                          \
 +		"done; "                                                  \
@@ -79,5 +83,5 @@ index 4993303f4d..f4b3b62fca 100644
  		"fi; "                                                    \
  		"setenv efi_fdtfile\0"
 -- 
-2.21.0
+2.38.1
 

uefi-enable-SetVariableRT-with-volotile-storage.patch

@@ -0,0 +1,33 @@
+From fd736dd720b29fa69a4bb87492f3f94dc6076996 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 25 Mar 2025 17:13:44 +0000
+Subject: [PATCH] efi: enable SetVariableRT with volotile storage
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ lib/efi_loader/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
+index d4f6b56afaa..3e522131b01 100644
+--- a/lib/efi_loader/Kconfig
++++ b/lib/efi_loader/Kconfig
+@@ -108,6 +108,7 @@ choice
+ config EFI_VARIABLE_FILE_STORE
+ 	bool "Store non-volatile UEFI variables as file"
+ 	depends on FAT_WRITE
++	default y
+ 	help
+ 	  Select this option if you want non-volatile UEFI variables to be
+ 	  stored as file /ubootefi.var on the EFI system partition.
+@@ -115,6 +116,7 @@ config EFI_VARIABLE_FILE_STORE
+ config EFI_RT_VOLATILE_STORE
+ 	bool "Allow variable runtime services in volatile storage (e.g RAM)"
+ 	depends on EFI_VARIABLE_FILE_STORE
++	default y
+ 	help
+ 	  When EFI variables are stored on file we don't allow SetVariableRT,
+ 	  since the OS doesn't know how to write that file. At the same time
+-- 
+2.49.0
+

uefi-enable-https-boot-by-default.patch

@@ -0,0 +1,82 @@
+From 7eabab2fda12b7a4417e5c7f29a507dfa9e7fffd Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Sun, 3 May 2026 09:24:34 +0100
+Subject: [PATCH] enable https boot by default
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ cmd/Kconfig            | 1 +
+ lib/efi_loader/Kconfig | 1 +
+ lib/mbedtls/Kconfig    | 3 ++-
+ net/Kconfig            | 3 ++-
+ 4 files changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/cmd/Kconfig b/cmd/Kconfig
+index c71c6824a19..8ff14adffe1 100644
+--- a/cmd/Kconfig
++++ b/cmd/Kconfig
+@@ -2289,6 +2289,7 @@ config CMD_WGET
+ 
+ config WGET_HTTPS
+ 	bool "wget https"
++	default y
+ 	depends on CMD_WGET
+ 	depends on PROT_TCP_LWIP
+ 	depends on MBEDTLS_LIB
+diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
+index 4cb13ae7c8a..20733429962 100644
+--- a/lib/efi_loader/Kconfig
++++ b/lib/efi_loader/Kconfig
+@@ -609,6 +609,7 @@ config EFI_BOOTMGR
+ 
+ config EFI_HTTP_BOOT
+ 	bool "EFI HTTP Boot support"
++	default y
+ 	depends on NET
+ 	depends on CMDLINE
+ 	select CMD_NET
+diff --git a/lib/mbedtls/Kconfig b/lib/mbedtls/Kconfig
+index 789721ee6cd..7a241c2bc26 100644
+--- a/lib/mbedtls/Kconfig
++++ b/lib/mbedtls/Kconfig
+@@ -2,7 +2,7 @@
+ 
+ choice
+ 	prompt "Crypto libraries (U-Boot Proper)"
+-	default LEGACY_HASHING_AND_CRYPTO
++	default MBEDTLS_LIB
+ 	help
+ 	  Select crypto libraries.
+ 	  LEGACY_HASHING_AND_CRYPTO for legacy crypto libraries,
+@@ -15,6 +15,7 @@ config LEGACY_HASHING_AND_CRYPTO
+ 
+ config MBEDTLS_LIB
+ 	bool "MbedTLS libraries"
++	default y
+ 	select MBEDTLS_LIB_X509
+ endchoice
+ 
+diff --git a/net/Kconfig b/net/Kconfig
+index e712a0dd2ac..3158d37dff7 100644
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -16,7 +16,7 @@ if NET
+ 
+ choice
+ 	prompt "Networking stack"
+-	default NET_LEGACY
++	default NET_LWIP
+ 
+ config NET_LEGACY
+ 	bool "Legacy U-Boot networking stack"
+@@ -27,6 +27,7 @@ config NET_LEGACY
+ 
+ config NET_LWIP
+ 	bool "Use lwIP for networking stack"
++	default y
+ 	select NETDEVICES
+ 	help
+ 	  Include networking support based on the lwIP (lightweight IP)
+-- 
+2.54.0
+

uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch

@@ -0,0 +1,190 @@
+From 56a985cec8592a8de88e7f254df82f5d444a5ecc Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 28 May 2026 22:08:07 +0100
+Subject: [PATCH] initial find_fdt_location for finding the DT on disk
+
+The old distro boot looked for a DT on the first boot partition
+in the /dtb or /dtb/current directories, and Fedora extended this
+to look not just on the boot partition but all the partitions on
+that disk.
+
+The new ways of booting, both bootstd and bootefi bootmgr processes
+don't properly look for those options. This provides a function
+to search for the DTB on disk so that if the other DT mechanisms
+don't work this will look for one on disk to provide a working DT
+so that devices will continue to work as they did previously.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ cmd/bootmenu.c              |   5 ++
+ include/efi_loader.h        |   2 +
+ lib/efi_loader/efi_helper.c | 106 +++++++++++++++++++++++++++++++++++-
+ 3 files changed, 112 insertions(+), 1 deletion(-)
+
+diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c
+index 528afd221d0..a10ea35a687 100644
+--- a/cmd/bootmenu.c
++++ b/cmd/bootmenu.c
+@@ -502,6 +502,11 @@ static void handle_uefi_bootnext(void)
+ 	u16 bootnext;
+ 	efi_status_t ret;
+ 	efi_uintn_t size;
++	const char *fdt_opt;
++
++	/* Find the DTB on disk */
++	log_debug("We will load the DTB\n");
++	fdt_opt = find_fdt_location();
+ 
+ 	/* Initialize EFI drivers */
+ 	ret = efi_init_obj_list();
+diff --git a/include/efi_loader.h b/include/efi_loader.h
+index 3a4d502631c..b11f8a2cb42 100644
+--- a/include/efi_loader.h
++++ b/include/efi_loader.h
+@@ -574,6 +574,8 @@ struct efi_register_notify_event {
+ 	struct list_head handles;
+ };
+ 
++/* Find the FDT on any partition */
++char *find_fdt_location(void);
+ /* called at pre-initialization */
+ int efi_init_early(void);
+ /* Initialize efi execution environment */
+diff --git a/lib/efi_loader/efi_helper.c b/lib/efi_loader/efi_helper.c
+index 44b806aadc4..61e982091b9 100644
+--- a/lib/efi_loader/efi_helper.c
++++ b/lib/efi_loader/efi_helper.c
+@@ -15,6 +15,7 @@
+ #include <mapmem.h>
+ #include <dm.h>
+ #include <fs.h>
++#include <part.h>
+ #include <efi.h>
+ #include <efi_api.h>
+ #include <efi_load_initrd.h>
+@@ -98,6 +99,99 @@ int efi_get_pxe_arch(void)
+ 	return -EINVAL;
+ }
+ 
++/* We need to pass a blk device in and return a location, or a loaded DT */
++char *find_fdt_location(void)
++{
++	const char *fdt_filename;
++	/* FIXME: dynamic size */
++	char fdt_fullpath[60];
++	const char *prefix;
++	struct udevice *blk;
++	/* FIXME: Fedora really only cares about first 2*/
++	int MAX_PART = 8;
++	int part;
++	struct disk_partition info;
++	int fdtext;
++	int ret;
++	int retfdt;
++	int retload;
++	loff_t fdtsize;
++	ulong pbraddr;
++	loff_t len_read;
++
++	/* step one logic: we have the DT name we're hunting for */
++	fdt_filename = env_get("fdtfile");
++	if (fdt_filename) {
++		log_debug("FFL: We're looking for the DTB now!: %s\n", fdt_filename);
++
++		/* probe all block disks to search for fdt */
++		uclass_foreach_dev_probe(UCLASS_BLK, blk) {
++			log_debug("FFL: dev name: %s\n", blk->name);
++			struct blk_desc *desc;
++			desc = dev_get_uclass_plat(blk);
++			/* we should get a partition count here for looping */
++			/* For loop for each partition */
++			/* Need to also deal with zero part whole disk - part_get_info_whole_disk */
++			for (part = 1; part <= MAX_PART; part++) {
++				log_debug("FFL: part num: %d\n", part);
++				ret = part_get_info(desc, part, &info);
++				/* if we have partition check it for DT */
++				if (ret < 0) {
++					log_debug("FFL: no partition\n");
++				} else {
++					log_debug("FFL: we have a partition\n");
++					/* we should have a case/for prefix in =/ /dtb/ /dtb/current/ */
++					/* but for now we hard code if for Fedora */
++					prefix = "/dtb";
++					snprintf(fdt_fullpath, sizeof(fdt_fullpath), "%s/%s", prefix, fdt_filename);
++					log_debug("FFL: full name: %s\n", fdt_fullpath);
++					/* search for DT on partition and either find and exit or continue */
++					if (fs_set_blk_dev_with_part(desc, part) == 0){
++						log_debug("FFL: set block part pass\n");
++						fdtext = fs_exists(fdt_fullpath);
++						if (fdtext) {
++							/* we have a fdt!*/
++							if (fs_set_blk_dev_with_part(desc, part) == 0){
++								retfdt = fs_size(fdt_fullpath, &fdtsize);
++								if (retfdt == 0) {
++									log_debug("FFL: we have found a DT on disk, size %lld\n", fdtsize);
++									/* Get the main fdt and map it */
++									const char *fdt_pbr;
++									fdt_pbr = env_get("fdt_addr_r");
++									pbraddr = hextoul(fdt_pbr, NULL);
++									log_debug("FFL: fdr addr: %s\n", fdt_pbr);
++									if (fs_set_blk_dev_with_part(desc, part) == 0){
++										retload = fs_read(fdt_fullpath, pbraddr, 0, fdtsize, &len_read);
++										if (retload == 0) {
++											log_debug("FFL: we have a loaded DT, size %lld we can return\n", fdtsize);
++											log_info("Found DTB: %s\n", fdt_filename);
++											return fdt_pbr;
++										} else {
++											log_debug("FFL: DT load failed\n");
++										}
++									}
++								} else {
++									log_debug("FFL: we DON'T have a DT with size\n");
++								}
++							}
++						} else {
++							/* we don't have a fdt!*/
++							log_debug("FFL: we DON'T have a DT\n");
++						}
++					} else {
++						log_debug("FFL: set block part FAIL\n");
++					}
++				}
++			}
++		}
++        } else {
++		log_debug("FFL: fdt_filename not defined!!\n");
++	}
++
++	/* We didn't find a FDT */
++	return NULL;
++}
++
+ /**
+  * efi_create_current_boot_var() - Return Boot#### name were #### is replaced by
+  *			           the value of BootCurrent
+@@ -558,11 +652,21 @@ efi_status_t efi_install_fdt(void *fdt)
+ 		const char *fdt_opt;
+ 		uintptr_t fdt_addr;
+ 
++		/* Check if there is device tree loaded from disk */
++		fdt_opt = find_fdt_location();
++		if (fdt_opt)
++			log_info("Found DTB on disk\n");
++
+ 		/* Check if there is a hardware device tree */
+-		fdt_opt = env_get("fdt_addr");
++		if (!fdt_opt) {
++			fdt_opt = env_get("fdt_addr");
++			if (fdt_opt)
++				log_info("Found DTB: Prior firmware\n");
++		}
+ 		/* Use our own device tree as fallback */
+ 		if (!fdt_opt) {
+ 			fdt_opt = env_get("fdtcontroladdr");
++			log_info("Using DT from U-Boot\n");
+ 			if (!fdt_opt) {
+ 				log_err("need device tree\n");
+ 				return EFI_NOT_FOUND;
+-- 
+2.54.0
+

uefi-use-Fedora-specific-path-name.patch

@@ -1,50 +0,0 @@
-From 3cc3f7de06dcf9614554d63b159f0cd6710b96b0 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 18 Jun 2019 12:08:57 +0100
-Subject: [PATCH 2/2] use Fedora specific EFI path/name
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/config_distro_bootcmd.h | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index f4b3b62fca..2dc8be9815 100644
---- a/include/config_distro_bootcmd.h
-+++ b/include/config_distro_bootcmd.h
-@@ -92,9 +92,9 @@
- 
- #ifdef CONFIG_EFI_LOADER
- #if defined(CONFIG_ARM64)
--#define BOOTEFI_NAME "bootaa64.efi"
-+#define BOOTEFI_NAME "grubaa64.efi"
- #elif defined(CONFIG_ARM)
--#define BOOTEFI_NAME "bootarm.efi"
-+#define BOOTEFI_NAME "grubarm.efi"
- #elif defined(CONFIG_X86_RUN_32BIT)
- #define BOOTEFI_NAME "bootia32.efi"
- #elif defined(CONFIG_X86_RUN_64BIT)
-@@ -130,7 +130,7 @@
- 			"bootefi bootmgr ${fdtcontroladdr};"              \
- 		"fi;"                                                     \
- 		"load ${devtype} ${devnum}:${distro_bootpart} "           \
--			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
-+			"${kernel_addr_r} efi/fedora/"BOOTEFI_NAME"; "      \
- 		"if fdt addr ${fdt_addr_r}; then "                        \
- 			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
- 		"else "                                                   \
-@@ -165,9 +165,9 @@
- 		"run boot_efi_binary\0"                                   \
- 	"scan_dev_for_efi="                                               \
- 		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
--					"efi/boot/"BOOTEFI_NAME"; then "  \
-+					"efi/fedora/"BOOTEFI_NAME"; then "  \
- 				"echo Found EFI removable media binary "  \
--					"efi/boot/"BOOTEFI_NAME"; "       \
-+					"efi/fedora/"BOOTEFI_NAME"; "       \
- 				"run scan_dev_for_dtb; "                  \
- 				"echo EFI LOAD FAILED: continuing...; "   \
- 		"fi; "                                                    \
--- 
-2.21.0
-

usb-kbd-fixes.patch

@@ -1,115 +0,0 @@
-From a49845f198af088c4e5e0019edbf519344d78c97 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 4 Dec 2018 15:29:14 +0000
-Subject: [PATCH] usb kbd fixes
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- common/usb_kbd.c  | 66 +++++++++++++++++++++++++++++++++++------------
- include/console.h |  2 --
- 2 files changed, 50 insertions(+), 18 deletions(-)
-
-diff --git a/common/usb_kbd.c b/common/usb_kbd.c
-index 020f0d4117f..47674ce4458 100644
---- a/common/usb_kbd.c
-+++ b/common/usb_kbd.c
-@@ -518,25 +518,59 @@ static int probe_usb_keyboard(struct usb_device *dev)
- 		return error;
- 
- 	stdinname = env_get("stdin");
--#if CONFIG_IS_ENABLED(CONSOLE_MUX)
--	error = iomux_doenv(stdin, stdinname);
--	if (error)
--		return error;
--#else
--	/* Check if this is the standard input device. */
--	if (strcmp(stdinname, DEVNAME))
--		return 1;
-+	if (CONFIG_IS_ENABLED(CONSOLE_MUX)) {
-+		char *devname = DEVNAME;
-+		char *newstdin = NULL;
-+		/*
-+		 * stdin might not be set yet.. either way, with console-
-+		 * mux the sensible thing to do is add ourselves to the
-+		 * list of stdio devices:
-+		 */
-+		if (stdinname && !strstr(stdinname, DEVNAME)) {
-+			newstdin = malloc(strlen(stdinname) +
-+					strlen(","DEVNAME) + 1);
-+			sprintf(newstdin, "%s,"DEVNAME, stdinname);
-+			stdinname = newstdin;
-+		} else if (!stdinname) {
-+			stdinname = devname;
-+		}
-+		error = iomux_doenv(stdin, stdinname);
-+		free(newstdin);
-+		if (error)
-+			goto unregister_stdio;
-+	} else {
-+		/* Check if this is the standard input device. */
-+		if (strcmp(stdinname, DEVNAME)) {
-+			error = -1;
-+			goto unregister_stdio;
-+		}
- 
--	/* Reassign the console */
--	if (overwrite_console())
--		return 1;
-+		/* Reassign the console */
-+		if (overwrite_console()) {
-+			error = -1;
-+			goto unregister_stdio;
-+		}
- 
--	error = console_assign(stdin, DEVNAME);
--	if (error)
--		return error;
--#endif
-+		error = console_assign(stdin, DEVNAME);
-+		if (error)
-+			goto unregister_stdio;
-+	}
-+
-+	return 0;
- 
-+unregister_stdio:
-+	/*
-+	 * If probe fails, the device will be removed.. leaving dangling
-+	 * pointers if the stdio device is not unregistered.  If u-boot
-+	 * is built without stdio_deregister(), just pretend to succeed
-+	 * in order to avoid dangling pointers.
-+	 */
-+#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
-+	stdio_deregister(DEVNAME, 1);
-+	return error;
-+#else
- 	return 0;
-+#endif
- }
- 
- #if !CONFIG_IS_ENABLED(DM_USB)
-@@ -642,7 +676,7 @@ static int usb_kbd_remove(struct udevice *dev)
- 
- 	return 0;
- err:
--	printf("%s: warning, ret=%d", __func__, ret);
-+	printf("%s: warning, ret=%d\n", __func__, ret);
- 	return ret;
- }
- 
-diff --git a/include/console.h b/include/console.h
-index e935c601f12..6382ec8e0d6 100644
---- a/include/console.h
-+++ b/include/console.h
-@@ -56,8 +56,6 @@ int console_announce_r(void);
- /*
-  * CONSOLE multiplexing.
-  */
--#ifdef CONFIG_CONSOLE_MUX
- #include <iomux.h>
--#endif
- 
- #endif
--- 
-2.19.2
-

x86_64-boards

@@ -0,0 +1 @@
+qemu-x86_64