dist-git conversion

#2781)

.gitignore

@@ -0,0 +1 @@
+ucarp-1.4.tar.bz2

dead.package

@@ -1 +0,0 @@
-Dead upstream, old website NSFW

sources

@@ -0,0 +1 @@
+5b50ca5553bc520f4e639964c9ad5056  ucarp-1.5.tar.bz2

ucarp.init

@@ -0,0 +1,156 @@
+#!/bin/bash
+# $Id$
+#
+# chkconfig: - 91 09
+# description: Starts and stops the common address redundancy protocol daemon
+
+### BEGIN INIT INFO
+# Provides: lsb-ucarp
+# Required-Start: $local_fs $network $remote_fs
+# Required-Stop: $local_fs $network $remote_fs
+# Default-Start:
+# Default-Stop: 0 1 6
+# Short-Description: start and stop ucarp
+# Description: Common Address Redundancy Protocol (CARP) for Unix
+### END INIT INFO
+
+# Source function library.
+. /etc/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+get_files() {
+    FILES=`find ${CONFDIR} -maxdepth 1 -type f -name 'vip-*.conf' \
+        -printf "%f\n" | egrep '^vip-[[:digit:]]+\.conf$' | LC_COLLATE="C" sort`
+}
+
+prog=$"common address redundancy protocol daemon"
+LOGGER="/usr/bin/logger -p daemon.notice -t ucarp"
+CONFDIR=/etc/ucarp
+UPSCRIPT=/usr/libexec/ucarp/vip-up
+DOWNSCRIPT=/usr/libexec/ucarp/vip-down
+
+start() {
+    RETVAL=-1
+    VIP_RETVAL=0
+
+    echo -n $"Starting ${prog}: "
+
+    get_files
+
+    if [ -z "${FILES}" ]; then
+        ${LOGGER} "no virtual addresses are configured in ${CONFDIR}"
+        failure
+        RETVAL=1
+    else
+        for FILE in ${FILES}; do
+            # Check that the file name gives us an ID between 1 and 255
+            ID=`echo ${FILE}| sed 's/^vip-\(.*\).conf/\1/'`
+            if [ ${ID} -lt 1 -o ${ID} -gt 255 ]; then
+                ${LOGGER} "ID out of range (1-255) for ${FILE}, skipped VIP ID ${ID}"
+                continue
+            fi
+
+            unset PASSWORD BIND_INTERFACE SOURCE_ADDRESS VIP_ADDRESS OPTIONS
+            # Source ucarp settings
+            . ${CONFDIR}/vip-common.conf
+            . ${CONFDIR}/${FILE}
+            TMP_RETVAL=0
+
+            if [ -z "${PASSWORD}" ]; then
+                ${LOGGER} "no PASSWORD found for ${FILE}, skipped VIP ID ${ID}"
+                TMP_RETVAL=1
+            fi
+            if [ -z "${BIND_INTERFACE}" ]; then
+                ${LOGGER} "no BIND_INTERFACE found for ${FILE}, skipped VIP ID ${ID}"
+                TMP_RETVAL=1
+            fi
+            if [ -z "${SOURCE_ADDRESS}" ]; then
+                ${LOGGER} "no SOURCE_ADDRESS found for ${FILE}, skipped VIP ID ${ID}"
+                TMP_RETVAL=1
+            fi
+            if [ -z "${VIP_ADDRESS}" ]; then
+                ${LOGGER} "no VIP_ADDRESS found for ${FILE}, skipped VIP ID ${ID}"
+                TMP_RETVAL=1
+            fi
+
+            # If one of more of the above failed, skip the daemon launch
+            if [ ${TMP_RETVAL} -ne 0 ]; then
+                VIP_RETVAL=1
+                continue
+            fi
+
+            [ ${RETVAL} -eq -1 ] && RETVAL=0
+            daemon /usr/sbin/ucarp --daemonize --interface=${BIND_INTERFACE} --pass=${PASSWORD} --srcip=${SOURCE_ADDRESS} --vhid=${ID} --addr=${VIP_ADDRESS} ${OPTIONS} --upscript=$UPSCRIPT --downscript=$DOWNSCRIPT >/dev/null
+            LAUNCH_RETVAL=$?
+            [ ${LAUNCH_RETVAL} -ne 0 ] && RETVAL=1
+        done
+
+        # failure/success or warning if launch worked with some vip errors
+        if [ ${RETVAL} -eq 0 -a ${VIP_RETVAL} -eq 0 ]; then
+            ${LOGGER} "all ucarp configurations were applied successfully"
+            success
+            touch /var/lock/subsys/ucarp
+        elif [ ${RETVAL} -eq 0 -a ${VIP_RETVAL} -eq 1 ]; then
+            ${LOGGER} "error in one or more of the ucarp configurations"
+            warning
+        else
+           ${LOGGER} "error running one or more of the ucarp daemon instances"
+            failure
+        fi
+    fi
+    echo
+}
+
+stop() {
+    echo -n $"Stopping $prog: "
+    killproc /usr/sbin/ucarp >/dev/null
+    RETVAL=$?
+
+    # With "--shutdown" in the default OPTIONS, the down script is called
+    # when ucarp is stopped, so IP addresses are released, no "leftovers".
+
+    # failure/success (no warning, too complicated to handle properly)
+    if [ ${RETVAL} -eq 1 ]; then
+        ${LOGGER} "it seems like no ucarp daemon were running"
+        failure
+    else
+        ${LOGGER} "all ucarp daemons stopped and IP addresses unassigned"
+        success
+        rm -f /var/lock/subsys/ucarp
+    fi
+    echo
+}
+
+# See how we were called.
+case "$1" in
+    start)
+        start
+        ;;
+    stop)
+        stop
+        ;;
+    restart)
+        stop
+        start
+        ;;
+    condrestart)
+        if [ -f /var/lock/subsys/ucarp ]; then
+            stop
+            start
+        fi
+        ;;
+    status)
+        status /usr/sbin/ucarp
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|condrestart|status}"
+        exit 1
+esac
+
+exit $RETVAL
+

ucarp.spec

@@ -0,0 +1,169 @@
+Summary: Common Address Redundancy Protocol (CARP) for Unix
+Name: ucarp
+Version: 1.5
+Release: 1%{?dist}
+# See the COPYING file which details everything
+License: MIT and BSD
+Group: System Environment/Daemons
+URL: http://www.ucarp.org/
+Source0: http://download.pureftpd.org/pub/ucarp/ucarp-%{version}.tar.bz2
+Source1: ucarp.init
+Source2: vip-001.conf.example
+Source3: vip-common.conf
+Source4: vip-up
+Source5: vip-down
+#Source6: vip-helper.sh
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
+Requires(post): /sbin/chkconfig
+Requires(preun): /sbin/chkconfig, /sbin/service
+Requires(postun): /sbin/service
+BuildRequires: gettext
+BuildRequires: autoconf, automake, libtool
+BuildRequires: libpcap-devel
+
+%description
+UCARP allows a couple of hosts to share common virtual IP addresses in order
+to provide automatic failover. It is a portable userland implementation of the
+secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's
+alternative to the patents-bloated VRRP).
+Strong points of the CARP protocol are: very low overhead, cryptographically
+signed messages, interoperability between different operating systems and no
+need for any dedicated extra network link between redundant hosts.
+
+
+%prep
+%setup -q
+
+
+%build
+%configure
+%{__make} %{?_smp_mflags}
+
+
+%install
+%{__rm} -rf %{buildroot}
+%{__make} install DESTDIR=%{buildroot}
+%find_lang %{name}
+
+# Install the init script
+%{__install} -D -p -m 0755 %{SOURCE1} \
+    %{buildroot}/etc/rc.d/init.d/ucarp
+
+%{__mkdir_p} %{buildroot}/etc/ucarp
+%{__mkdir_p} %{buildroot}%{_libexecdir}/ucarp
+
+# Install the example config files
+%{__install} -D -p -m 0600 %{SOURCE2} %{SOURCE3} \
+    %{buildroot}/etc/ucarp/
+
+# Install helper scripts
+%{__install} -D -p -m 0700 %{SOURCE4} %{SOURCE5} \
+    %{buildroot}%{_libexecdir}/ucarp/
+
+
+%clean
+%{__rm} -rf %{buildroot}
+
+
+%pre
+# Legacy, in case we update from an older package where the service was "carp"
+if [ -f /etc/rc.d/init.d/carp ]; then
+    /sbin/service carp stop &>/dev/null || :
+    /sbin/chkconfig --del carp
+fi
+
+%post
+/sbin/chkconfig --add ucarp
+
+%preun
+if [ $1 -eq 0 ]; then
+    /sbin/service ucarp stop &>/dev/null || :
+    /sbin/chkconfig --del ucarp
+fi
+
+%postun
+if [ $1 -ge 1 ]; then
+    /sbin/service ucarp condrestart &>/dev/null || :
+fi
+
+
+%files -f %{name}.lang
+%defattr(-,root,root,-)
+%doc AUTHORS COPYING ChangeLog NEWS README
+/etc/rc.d/init.d/ucarp
+%attr(0700,root,root) %dir /etc/ucarp/
+%config(noreplace) /etc/ucarp/vip-common.conf
+/etc/ucarp/vip-001.conf.example
+%{_libexecdir}/ucarp/
+%{_sbindir}/ucarp
+
+%changelog
+* Mon Apr 13 2009 Jon Ciesla <limb@jcomserv.net> - 1.5-1
+- Update to 1.5 BZ 458767.
+- Added LSB header to init script, BZ 247082.
+- New upstream should address BZ 427495, 449266, 455394.
+
+* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Sun Feb  3 2008 Matthias Saou <http://freshrpms.net/> 1.4-1
+- Update to 1.4.
+- Rip out all of the "list" stuff and 255.255.255.255 address hack (#427495).
+- Change from INITLOG (now deprecated) to LOGGER in the init script.
+- Move helper scripts to /usr/libexec/ucarp/.
+
+* Thu Aug 23 2007 Matthias Saou <http://freshrpms.net/> 1.2-9
+- Rebuild for new BuildID feature.
+
+* Sun Aug  5 2007 Matthias Saou <http://freshrpms.net/> 1.2-8
+- Update License field.
+
+* Fri Feb  2 2007 Matthias Saou <http://freshrpms.net/> 1.2-7
+- Rename service from carp to ucarp, to be more consistent.
+- Move /etc/sysconfig/carp to /etc/ucarp since it has become a config directory
+  of its own.
+
+* Wed Nov 29 2006 Matthias Saou <http://freshrpms.net/> 1.2-6
+- Rebuild against new libpcap.
+
+* Mon Nov 13 2006 Matthias Saou <http://freshrpms.net/> 1.2-5
+- Include all improvements from Denis Ovsienko (#200395).
+
+* Mon Aug 28 2006 Matthias Saou <http://freshrpms.net/> 1.2-4
+- FC6 rebuild.
+
+* Tue Aug 22 2006 Matthias Saou <http://freshrpms.net/> 1.2-3
+- Update to 1.3 snapshot, which includes the ARP fix, as well as fixes for the
+  segfaults reported in #200400 and #201596.
+- Add autoconf, automake and libtool build reqs for the 1.3 patch.
+
+* Thu Jul 27 2006 Matthias Saou <http://freshrpms.net/> 1.2-3
+- Fix init script for recent find versions (#200395).
+
+* Thu Jun 22 2006 Matthias Saou <http://freshrpms.net/> 1.2-2
+- Include ARP patch backported from 1.3 snapshot (#196095).
+- Make libpcap build requirement conditional to be able to share spec file.
+
+* Wed Jun 21 2006 Matthias Saou <http://freshrpms.net/> 1.2-1
+- Update to 1.2.
+- BuildRequire libpcap-devel instead of libpcap now that it has been split.
+
+* Mon Mar  6 2006 Matthias Saou <http://freshrpms.net/> 1.1-5
+- FC5 rebuild.
+
+* Thu Feb  9 2006 Matthias Saou <http://freshrpms.net/> 1.1-4
+- Rebuild for new gcc/glibc.
+
+* Thu Nov 17 2005 Matthias Saou <http://freshrpms.net/> 1.1-3
+- Rebuild against new libpcap library.
+
+* Fri Apr  1 2005 Michael Schwendt <mschwendt[AT]users.sf.net> - 1.1-2
+- Add %%dir entry for /etc/sysconfig/carp directory.
+
+* Thu Jan 13 2005 Matthias Saou <http://freshrpms.net/> 1.1-1
+- Update to 1.1.
+- Update source location.
+
+* Fri Jul  9 2004 Matthias Saou <http://freshrpms.net/> 1.0-1
+- Initial RPM release.
+

vip-001.conf.example

@@ -0,0 +1,10 @@
+# Virtual IP configuration file for UCARP
+# The number (from 001 to 255) in the name of the file is the identifier
+
+# In the simple scenario, you want a single virtual IP address from the _same_
+# network to be taken over by one of the routers.
+VIP_ADDRESS="10.0.0.254"
+
+# In more complex scenarios, check the "vip-common" file for values to override
+# and how to add options.
+

vip-common.conf

@@ -0,0 +1,8 @@
+# Common VIP settings which can be overridden in individual vip-<nnnn>.conf
+PASSWORD="love"
+BIND_INTERFACE="eth0"
+SOURCE_ADDRESS=""
+
+# If you have extra options to add, see "ucarp --help" output
+OPTIONS="--shutdown --preempt"
+

vip-down

@@ -0,0 +1,5 @@
+#!/bin/sh
+exec 2>/dev/null
+
+/sbin/ip address del "$2"/32 dev "$1"
+

vip-up

@@ -0,0 +1,5 @@
+#!/bin/sh
+exec 2>/dev/null
+
+/sbin/ip address add "$2"/32 dev "$1"
+