removed old deprecated ghost dirs

.gitignore

@@ -0,0 +1,6 @@
+udev-160.tar.bz2
+/udev-164.tar.bz2
+/udev-164.tar.bz2.sign
+/udev-166.tar.bz2
+/udev-166.tar.bz2.sign
+/udev-167.tar.bz2

0002-Run-ata_id-on-non-removable-USB-devices.patch

@@ -0,0 +1,56 @@
+From 42b9482ab2da64b4c2f254c227c0efaf83988a84 Mon Sep 17 00:00:00 2001
+From: David Zeuthen <davidz@redhat.com>
+Date: Wed, 30 Mar 2011 08:11:03 -0400
+Subject: [PATCH] Run ata_id on non-removable USB devices
+
+If a USB device is marked as removable, it is often a SATA/PATA disk
+in an enclosure (note that flash card readers and usb storage sticks
+are always marked as removable). In this case, try running ata_id
+(which sends ATA commands wrapped in SCSI ATA PASS THROUGH commands)
+to get information about the disk. If this fails, just fall back to
+running usb_id since it could be the device isn't an ATA device at
+all or the device doesn't have a SAT layer.
+
+This extra information is nice to have as it indicates if it is
+suitable to send e.g. SMART commands to the disk, whether the disk
+supports power management and so on. Additionally, the VPD and serial
+number returned by ata_id is usually more accurate as it stems from
+the disk itself instead of the enclosure.
+
+Note that udisks has been doing this for a while
+
+ KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="usb", ENV{DEVTYPE}=="disk", IMPORT{program}="udisks-probe-ata-smart $tempnode"
+
+so this change shouldn't be too disruptive (udisks-probe-ata-smart
+also sends ATA commands via the ATA PASS THROUGH command).
+
+Signed-off-by: David Zeuthen <davidz@redhat.com>
+---
+ rules/rules.d/60-persistent-storage.rules |    8 ++++++--
+ 1 files changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/rules/rules.d/60-persistent-storage.rules b/rules/rules.d/60-persistent-storage.rules
+index 6a9abdd..12fabef 100644
+--- a/rules/rules.d/60-persistent-storage.rules
++++ b/rules/rules.d/60-persistent-storage.rules
+@@ -22,14 +22,18 @@ ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
+ KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
+ KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
+ 
+-# USB devices use their own serial number
+-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program}="usb_id --export %p"
+ # ATA devices with their own "ata" kernel subsystem
+ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="ata", IMPORT{program}="ata_id --export $tempnode"
+ # ATA devices using the "scsi" subsystem
+ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $tempnode"
+ # ATA/ATAPI devices (SPC-3 or later) using the "scsi" subsystem
+ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $tempnode"
++
++# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
++KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $tempnode"
++# Otherwise fall back to using usb_id for USB devices
++KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program}="usb_id --export %p"
++
+ # scsi devices
+ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="scsi"
+ KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="cciss"

0003-systemd-let-settle-depend-on-trigger-do-not-block-ba.patch

@@ -0,0 +1,51 @@
+From daf32d32172e19e78754999b41c27b45e3629326 Mon Sep 17 00:00:00 2001
+From: Kay Sievers <kay.sievers@vrfy.org>
+Date: Thu, 31 Mar 2011 13:15:47 +0200
+Subject: [PATCH] systemd: let settle depend on trigger, do not block basic with trigger
+
+---
+ init/udev-settle.service.in  |   15 +++++++++------
+ init/udev-trigger.service.in |    1 -
+ 2 files changed, 9 insertions(+), 7 deletions(-)
+
+diff --git a/init/udev-settle.service.in b/init/udev-settle.service.in
+index be06a39..bda8626 100644
+--- a/init/udev-settle.service.in
++++ b/init/udev-settle.service.in
+@@ -1,15 +1,18 @@
+-# This barrier service is usually not enabled by default. If enabled,
+-# it acts as a barrier for basic.target -- so all later services will
++# This service is usually not enabled by default. If enabled, it
++# acts as a barrier for basic.target -- so all later services will
+ # wait for udev completely finishing its coldplug run.
+ #
+-# It might be enabled just unconditionally, or pulled-in on-demand by
+-# broken or non-hotplug-aware services that assume a fully populated
+-# /dev at startup.
++# If needed, to work around broken or non-hotplug-aware services,
++# it might be enabled unconditionally, or pulled-in on-demand by
++# the services that assume a fully populated /dev at startup. It
++# should not be used or pulled-in ever on systems without such
++# legacy services running.
+ 
+ [Unit]
+ Description=udev Wait for Complete Device Initialization
+ DefaultDependencies=no
+-After=udev.service
++Requires=udev.service
++After=udev-trigger.service
+ Before=basic.target
+ 
+ [Service]
+diff --git a/init/udev-trigger.service.in b/init/udev-trigger.service.in
+index 0ede317..745974a 100644
+--- a/init/udev-trigger.service.in
++++ b/init/udev-trigger.service.in
+@@ -2,7 +2,6 @@
+ Description=udev Coldplug all Devices
+ Requires=udev.service
+ After=udev.service
+-Before=basic.target
+ DefaultDependencies=no
+ 
+ [Service]

0004-Add-rule-for-Acer-Aspire-One-ZG8-to-use-acer-aspire_.patch

@@ -0,0 +1,29 @@
+From ff4a035a8aaba6a7b5b85c4b348886d72c42e84c Mon Sep 17 00:00:00 2001
+From: Lee, Chun-Yi <joeyli.kernel@gmail.com>
+Date: Thu, 31 Mar 2011 18:01:05 +0800
+Subject: [PATCH] Add rule for Acer Aspire One ZG8 to use acer-aspire_5720 keymap
+
+Acer Aspire One ZG8's bluetooth HW key emit 0xD9 scancode, it must map
+to KEY_BLUETOOTH like Acer Aspire 5720. So, add rule for Acer Aspire One
+ZG8 use acer-aspire_5720 keymap.
+
+Tested on Acer Aspire One ZG8 netbook.
+
+Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
+Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
+---
+ extras/keymap/95-keymap.rules |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/extras/keymap/95-keymap.rules b/extras/keymap/95-keymap.rules
+index 0c3ae38..44d5064 100644
+--- a/extras/keymap/95-keymap.rules
++++ b/extras/keymap/95-keymap.rules
+@@ -100,6 +100,7 @@ ENV{DMI_VENDOR}=="Acer*", ATTR{[dmi/id]product_name}=="Aspire 6920", RUN+="keyma
+ ENV{DMI_VENDOR}=="Acer*", ATTR{[dmi/id]product_name}=="Aspire 5920G", RUN+="keymap $name acer-aspire_5920g"
+ ENV{DMI_VENDOR}=="Acer*", ATTR{[dmi/id]product_name}=="Aspire 5720*", RUN+="keymap $name acer-aspire_5720"
+ ENV{DMI_VENDOR}=="Acer*", ATTR{[dmi/id]product_name}=="Aspire 8930", RUN+="keymap $name acer-aspire_8930"
++ENV{DMI_VENDOR}=="Acer*", ATTR{[dmi/id]product_serial}=="ZG8*", RUN+="keymap $name acer-aspire_5720"
+ 
+ ENV{DMI_VENDOR}=="*BenQ*", ATTR{[dmi/id]product_name}=="*Joybook R22*", RUN+="keymap $name 0x6E wlan"
+ 

0005-udevd-add-N-to-optstring-in-getopt_long.patch

@@ -0,0 +1,22 @@
+From 6ee9b2cb8cf023253853f1c80e707598685b11f3 Mon Sep 17 00:00:00 2001
+From: Thomas Egerer <thomas.egerer@secunet.com>
+Date: Thu, 31 Mar 2011 17:25:31 +0200
+Subject: [PATCH] udevd: add 'N:' to optstring in getopt_long
+
+---
+ udev/udevd.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/udev/udevd.c b/udev/udevd.c
+index 1871474..a8b339f 100644
+--- a/udev/udevd.c
++++ b/udev/udevd.c
+@@ -1118,7 +1118,7 @@ int main(int argc, char *argv[])
+ 	for (;;) {
+ 		int option;
+ 
+-		option = getopt_long(argc, argv, "c:deDthV", options, NULL);
++		option = getopt_long(argc, argv, "c:deDtN:hV", options, NULL);
+ 		if (option == -1)
+ 			break;
+ 

0006-Revert-Do-not-build-extras-with-disable-extras.patch

@@ -0,0 +1,34 @@
+From 9bb54267a1483e8f3b2de352c7be433f625e5606 Mon Sep 17 00:00:00 2001
+From: Martin Pitt <martin.pitt@ubuntu.com>
+Date: Thu, 31 Mar 2011 19:23:19 +0200
+Subject: [PATCH] Revert "Do not build extras with --disable-extras"
+
+This reverts commit 905818f5961446ac32d1b2d165185fffddc4915a.
+
+We do want to build some extras, just not the ones with extra dependencies.
+Thanks to Juergen Daubert for pointing this out.
+---
+ Makefile.am |    3 ---
+ 1 files changed, 0 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index df70bf7..2c20f46 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -225,7 +225,6 @@ dist_udevrules_DATA += \
+ 	extras/rule_generator/75-cd-aliases-generator.rules \
+ 	extras/rule_generator/75-persistent-net-generator.rules
+ 
+-if ENABLE_EXTRAS
+ # ------------------------------------------------------------------------------
+ # firmware - firmware loading
+ # ------------------------------------------------------------------------------
+@@ -314,8 +313,6 @@ extras_v4l_id_v4l_id_LDADD = libudev/libudev-private.la
+ libexec_PROGRAMS += extras/v4l_id/v4l_id
+ dist_udevrules_DATA += extras/v4l_id/60-persistent-v4l.rules
+ 
+-endif # ENABLE_EXTRAS
+-
+ # ------------------------------------------------------------------------------
+ # qemu -- qemu/kvm guest tweaks
+ # ------------------------------------------------------------------------------

0007-Avoid-spinning-up-CD-on-pressing-eject-button.patch

@@ -0,0 +1,45 @@
+From 55eb500cc5465babf1fd773dbcceeb90eeefd997 Mon Sep 17 00:00:00 2001
+From: Martin Pitt <martin.pitt@ubuntu.com>
+Date: Mon, 4 Apr 2011 11:47:54 +0200
+Subject: [PATCH] Avoid spinning up CD on pressing eject button
+
+When the CD tray door is locked and the hardware eject button is pressed, newer
+kernels (2.6.38+) will send out a change event with a DISK_EJECT_REQUEST==1
+property. Do not run cdrom_id and blkid in this case, as the media state and
+contents does not change, and this only needlessly spins up the drive again
+right before ejection.
+---
+ extras/cdrom_id/60-cdrom_id.rules         |    3 +++
+ rules/rules.d/60-persistent-storage.rules |    4 ++--
+ 2 files changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/extras/cdrom_id/60-cdrom_id.rules b/extras/cdrom_id/60-cdrom_id.rules
+index b3109f1..aedf6f0 100644
+--- a/extras/cdrom_id/60-cdrom_id.rules
++++ b/extras/cdrom_id/60-cdrom_id.rules
+@@ -5,6 +5,9 @@ SUBSYSTEM!="block", GOTO="cdrom_end"
+ KERNEL!="sr[0-9]*|xvd*", GOTO="cdrom_end"
+ ENV{DEVTYPE}!="disk", GOTO="cdrom_end"
+ 
++# this is only a button press event
++ENV{DISK_EJECT_REQUEST}=="?*", GOTO="cdrom_end"
++
+ KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1"
+ IMPORT{program}="cdrom_id --export $tempnode"
+ 
+diff --git a/rules/rules.d/60-persistent-storage.rules b/rules/rules.d/60-persistent-storage.rules
+index 12fabef..05a405f 100644
+--- a/rules/rules.d/60-persistent-storage.rules
++++ b/rules/rules.d/60-persistent-storage.rules
+@@ -62,9 +62,9 @@ ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PA
+ ENV{DEVTYPE}=="disk", KERNEL!="sd*|sr*", ATTR{removable}=="1", GOTO="persistent_storage_end"
+ 
+ # probe filesystem metadata of optical drives which have a media inserted
+-KERNEL=="sr*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", IMPORT{program}="/sbin/blkid -o udev -p -u noraid -O $env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET} $tempnode"
++KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", IMPORT{program}="/sbin/blkid -o udev -p -u noraid -O $env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET} $tempnode"
+ # single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
+-KERNEL=="sr*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", IMPORT{program}="/sbin/blkid -o udev -p -u noraid $tempnode"
++KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", IMPORT{program}="/sbin/blkid -o udev -p -u noraid $tempnode"
+ 
+ # probe filesystem metadata of disks
+ KERNEL!="sr*", IMPORT{program}="/sbin/blkid -o udev -p $tempnode"

0008-keymap-Support-Dell-Latitude-XT2-tablet-mode-navigat.patch

@@ -0,0 +1,56 @@
+From 5e0ec43fc40e3e6dd0e44a7d617846879e1dac9e Mon Sep 17 00:00:00 2001
+From: Seth Forshee <seth.forshee@canonical.com>
+Date: Tue, 5 Apr 2011 11:43:00 -0500
+Subject: [PATCH] keymap: Support Dell Latitude XT2 tablet-mode navigation keys
+
+The XT2 has a rocker (up/down/enter) and back button on the side
+in tablet mode, none of which work currently. Add entries for
+these keys.
+
+There is some overlap here with scan codes used in other Dell
+models, so these buttons are put in a new file specific to this
+model.
+
+Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
+Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
+---
+ Makefile.am                             |    1 +
+ extras/keymap/95-keymap.rules           |    1 +
+ extras/keymap/keymaps/dell-latitude-xt2 |    4 ++++
+ 3 files changed, 6 insertions(+), 0 deletions(-)
+ create mode 100644 extras/keymap/keymaps/dell-latitude-xt2
+
+diff --git a/Makefile.am b/Makefile.am
+index 2c20f46..4244089 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -568,6 +568,7 @@ dist_udevkeymap_DATA = \
+ 	extras/keymap/keymaps/asus \
+ 	extras/keymap/keymaps/compaq-e_evo \
+ 	extras/keymap/keymaps/dell \
++	extras/keymap/keymaps/dell-latitude-xt2 \
+ 	extras/keymap/keymaps/everex-xt5000 \
+ 	extras/keymap/keymaps/fujitsu-amilo_pa_2548 \
+ 	extras/keymap/keymaps/fujitsu-amilo_pro_edition_v3505 \
+diff --git a/extras/keymap/95-keymap.rules b/extras/keymap/95-keymap.rules
+index 44d5064..350f111 100644
+--- a/extras/keymap/95-keymap.rules
++++ b/extras/keymap/95-keymap.rules
+@@ -67,6 +67,7 @@ LABEL="keyboard_vendorcheck"
+ 
+ ENV{DMI_VENDOR}=="Dell*", RUN+="keymap $name dell"
+ ENV{DMI_VENDOR}=="Dell*", ATTR{[dmi/id]product_name}=="Inspiron 910|Inspiron 1010|Inspiron 1011|Inspiron 1012|Inspiron 1110|Inspiron 1210", RUN+="keymap $name 0x84 wlan"
++ENV{DMI_VENDOR}=="Dell*", ATTR{[dmi/id]product_name}=="Latitude XT2", RUN+="keymap $name dell-latitude-xt2"
+ 
+ ENV{DMI_VENDOR}=="Compaq*", ATTR{[dmi/id]product_name}=="*E500*|*Evo N*", RUN+="keymap $name compaq-e_evo"
+ 
+diff --git a/extras/keymap/keymaps/dell-latitude-xt2 b/extras/keymap/keymaps/dell-latitude-xt2
+new file mode 100644
+index 0000000..39872f5
+--- /dev/null
++++ b/extras/keymap/keymaps/dell-latitude-xt2
+@@ -0,0 +1,4 @@
++0x9B up # tablet rocker up
++0x9E enter # tablet rocker press
++0x9F back # tablet back
++0xA3 down # tablet rocker down

0009-selinux-do-not-label-files-in-runtime-dir.patch

@@ -0,0 +1,204 @@
+From 51f43b53293c4cc64c2a55598491c6cbf27b6bd5 Mon Sep 17 00:00:00 2001
+From: Kay Sievers <kay.sievers@vrfy.org>
+Date: Fri, 8 Apr 2011 01:03:49 +0200
+Subject: [PATCH] selinux: do not label files in runtime dir
+
+Do not label any files in the udev runtime directory, but only nodes,
+links and directories below /dev.
+
+In case the runtime directory falls back to /dev/.udev, label this
+directory once at udevd startup, but never anything below it.
+---
+ libudev/libudev-private.h       |    1 +
+ libudev/libudev-queue-private.c |    2 --
+ libudev/libudev-util-private.c  |   18 +++++++++++++++---
+ udev/udev-node.c                |    6 +++---
+ udev/udevd.c                    |   18 ++++++++----------
+ 5 files changed, 27 insertions(+), 18 deletions(-)
+
+diff --git a/libudev/libudev-private.h b/libudev/libudev-private.h
+index 7078b0f..8495f9a 100644
+--- a/libudev/libudev-private.h
++++ b/libudev/libudev-private.h
+@@ -220,6 +220,7 @@ uint64_t util_string_bloom64(const char *str);
+ 
+ /* libudev-util-private.c */
+ int util_create_path(struct udev *udev, const char *path);
++int util_create_path_selinux(struct udev *udev, const char *path);
+ int util_delete_path(struct udev *udev, const char *path);
+ int util_unlink_secure(struct udev *udev, const char *filename);
+ uid_t util_lookup_user(struct udev *udev, const char *user);
+diff --git a/libudev/libudev-queue-private.c b/libudev/libudev-queue-private.c
+index a714572..2f1afec 100644
+--- a/libudev/libudev-queue-private.c
++++ b/libudev/libudev-queue-private.c
+@@ -409,9 +409,7 @@ static void update_failed(struct udev_queue_export *udev_queue_export,
+ 		/* record event in the failed directory */
+ 		udev_queue_export->failed_count++;
+ 		util_create_path(udev, filename);
+-		udev_selinux_setfscreatecon(udev, filename, S_IFLNK);
+ 		symlink(udev_device_get_devpath(udev_device), filename);
+-		udev_selinux_resetfscreatecon(udev);
+ 		break;
+ 
+ 	case DEVICE_QUEUED:
+diff --git a/libudev/libudev-util-private.c b/libudev/libudev-util-private.c
+index 6b68b6a..19f979e 100644
+--- a/libudev/libudev-util-private.c
++++ b/libudev/libudev-util-private.c
+@@ -25,7 +25,7 @@
+ #include "libudev.h"
+ #include "libudev-private.h"
+ 
+-int util_create_path(struct udev *udev, const char *path)
++static int create_path(struct udev *udev, const char *path, bool selinux)
+ {
+ 	char p[UTIL_PATH_SIZE];
+ 	char *pos;
+@@ -55,7 +55,8 @@ int util_create_path(struct udev *udev, const char *path)
+ 		return err;
+ 
+ 	dbg(udev, "mkdir '%s'\n", p);
+-	udev_selinux_setfscreatecon(udev, p, S_IFDIR|0755);
++	if (selinux)
++		udev_selinux_setfscreatecon(udev, p, S_IFDIR|0755);
+ 	err = mkdir(p, 0755);
+ 	if (err != 0) {
+ 		err = -errno;
+@@ -66,10 +67,21 @@ int util_create_path(struct udev *udev, const char *path)
+ 				err = -ENOTDIR;
+ 		}
+ 	}
+-	udev_selinux_resetfscreatecon(udev);
++	if (selinux)
++		udev_selinux_resetfscreatecon(udev);
+ 	return err;
+ }
+ 
++int util_create_path(struct udev *udev, const char *path)
++{
++	return create_path(udev, path, false);
++}
++
++int util_create_path_selinux(struct udev *udev, const char *path)
++{
++	return create_path(udev, path, true);
++}
++
+ int util_delete_path(struct udev *udev, const char *path)
+ {
+ 	char p[UTIL_PATH_SIZE];
+diff --git a/udev/udev-node.c b/udev/udev-node.c
+index ab4e932..5e791ff 100644
+--- a/udev/udev-node.c
++++ b/udev/udev-node.c
+@@ -96,7 +96,7 @@ int udev_node_mknod(struct udev_device *dev, const char *file, mode_t mode, uid_
+ 	} else {
+ 		info(udev, "mknod '%s' %u:%u %#o\n", file, major(devnum), minor(devnum), mode);
+ 		do {
+-			err = util_create_path(udev, file);
++			err = util_create_path_selinux(udev, file);
+ 			if (err != 0 && err != -ENOENT)
+ 				break;
+ 			udev_selinux_setfscreatecon(udev, file, mode);
+@@ -184,7 +184,7 @@ static int node_symlink(struct udev *udev, const char *node, const char *slink)
+ 	} else {
+ 		info(udev, "creating symlink '%s' to '%s'\n", slink, target);
+ 		do {
+-			err = util_create_path(udev, slink);
++			err = util_create_path_selinux(udev, slink);
+ 			if (err != 0 && err != -ENOENT)
+ 				break;
+ 			udev_selinux_setfscreatecon(udev, slink, S_IFLNK);
+@@ -201,7 +201,7 @@ static int node_symlink(struct udev *udev, const char *node, const char *slink)
+ 	util_strscpyl(slink_tmp, sizeof(slink_tmp), slink, TMP_FILE_EXT, NULL);
+ 	unlink(slink_tmp);
+ 	do {
+-		err = util_create_path(udev, slink_tmp);
++		err = util_create_path_selinux(udev, slink_tmp);
+ 		if (err != 0 && err != -ENOENT)
+ 			break;
+ 		udev_selinux_setfscreatecon(udev, slink_tmp, S_IFLNK);
+diff --git a/udev/udevd.c b/udev/udevd.c
+index a8b339f..df5c199 100644
+--- a/udev/udevd.c
++++ b/udev/udevd.c
+@@ -822,7 +822,7 @@ static void static_dev_create_from_modules(struct udev *udev)
+ 			continue;
+ 
+ 		util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/", devname, NULL);
+-		util_create_path(udev, filename);
++		util_create_path_selinux(udev, filename);
+ 		udev_selinux_setfscreatecon(udev, filename, mode);
+ 		info(udev, "mknod '%s' %c%u:%u\n", filename, type, maj, min);
+ 		if (mknod(filename, mode, makedev(maj, min)) < 0 && errno == EEXIST)
+@@ -833,7 +833,7 @@ static void static_dev_create_from_modules(struct udev *udev)
+ 	fclose(f);
+ }
+ 
+-static int copy_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
++static int copy_dev_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
+ {
+ 	struct dirent *dent;
+ 
+@@ -886,7 +886,7 @@ static int copy_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
+ 				continue;
+ 			}
+ 
+-			copy_dir(udev, dir2_from, dir2_to, maxdepth-1);
++			copy_dev_dir(udev, dir2_from, dir2_to, maxdepth-1);
+ 
+ 			closedir(dir2_to);
+ 			closedir(dir2_from);
+@@ -930,7 +930,7 @@ static void static_dev_create_from_devices(struct udev *udev, DIR *dir)
+ 	dir_from = opendir(LIBEXECDIR "/devices");
+ 	if (dir_from == NULL)
+ 		return;
+-	copy_dir(udev, dir_from, dir, 8);
++	copy_dev_dir(udev, dir_from, dir, 8);
+ 	closedir(dir_from);
+ }
+ 
+@@ -985,9 +985,7 @@ static int convert_db(struct udev *udev)
+ 
+ 	/* make sure we do not get here again */
+ 	util_create_path(udev, filename);
+-	udev_selinux_setfscreatecon(udev, udev_get_run_path(udev), S_IFDIR|0755);
+ 	mkdir(filename, 0755);
+-	udev_selinux_resetfscreatecon(udev);
+ 
+ 	/* old database */
+ 	util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/.udev/db", NULL);
+@@ -1097,9 +1095,7 @@ int main(int argc, char *argv[])
+ 	/* make sure, that our runtime dir exists and is writable */
+ 	if (utimensat(AT_FDCWD, udev_get_run_config_path(udev), NULL, 0) < 0) {
+ 		/* try to create our own subdirectory, do not create parent directories */
+-		udev_selinux_setfscreatecon(udev, udev_get_run_config_path(udev), S_IFDIR|0755);
+ 		mkdir(udev_get_run_config_path(udev), 0755);
+-		udev_selinux_resetfscreatecon(udev);
+ 
+ 		if (utimensat(AT_FDCWD, udev_get_run_config_path(udev), NULL, 0) >= 0) {
+ 			/* directory seems writable now */
+@@ -1111,8 +1107,12 @@ int main(int argc, char *argv[])
+ 			util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/.udev", NULL);
+ 			if (udev_set_run_path(udev, filename) == NULL)
+ 				goto exit;
++			mkdir(udev_get_run_path(udev), 0755);
+ 		}
+ 	}
++	/* relabel runtime dir only if it resides below /dev */
++	if (strncmp(udev_get_run_path(udev), udev_get_dev_path(udev), strlen(udev_get_dev_path(udev))) == 0)
++		udev_selinux_lsetfilecon(udev, udev_get_run_path(udev), 0755);
+ 	info(udev, "runtime dir '%s'\n", udev_get_run_path(udev));
+ 
+ 	for (;;) {
+@@ -1281,9 +1281,7 @@ int main(int argc, char *argv[])
+ 		util_strscpyl(filename, sizeof(filename), udev_get_run_path(udev), "/rules.d", NULL);
+ 		if (stat(filename, &statbuf) != 0) {
+ 			util_create_path(udev, filename);
+-			udev_selinux_setfscreatecon(udev, filename, S_IFDIR|0755);
+ 			mkdir(filename, 0755);
+-			udev_selinux_resetfscreatecon(udev);
+ 		}
+ 		inotify_add_watch(pfd[FD_INOTIFY].fd, filename,
+ 				  IN_DELETE | IN_MOVE | IN_CLOSE_WRITE);

0010-selinux-firmware-do-not-label-files-in-runtime-dir.patch

@@ -0,0 +1,25 @@
+From 960250952193db522b8ced336bf998bd7e8e4a31 Mon Sep 17 00:00:00 2001
+From: Kay Sievers <kay.sievers@vrfy.org>
+Date: Fri, 8 Apr 2011 03:08:16 +0200
+Subject: [PATCH] selinux: firmware - do not label files in runtime dir
+
+---
+ extras/firmware/firmware.c |    2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+diff --git a/extras/firmware/firmware.c b/extras/firmware/firmware.c
+index 8199820..f2df76c 100644
+--- a/extras/firmware/firmware.c
++++ b/extras/firmware/firmware.c
+@@ -159,11 +159,9 @@ int main(int argc, char **argv)
+ 			err = util_create_path(udev, misspath);
+ 			if (err != 0 && err != -ENOENT)
+ 				break;
+-			udev_selinux_setfscreatecon(udev, misspath, S_IFLNK);
+ 			err = symlink(devpath, misspath);
+ 			if (err != 0)
+ 				err = -errno;
+-			udev_selinux_resetfscreatecon(udev);
+ 		} while (err == -ENOENT);
+ 		rc = 2;
+ 		set_loading(udev, loadpath, "-1");

Makefile.git

@@ -0,0 +1,6 @@
+Patch:
+	@for i in 00*.patch; do n=$$[$$(echo $$i|cut -f 1 -d '-'|sed -e 's#^0*##')]; echo "Patch$$n: $$i";done
+
+patch:
+	@for i in 00*.patch; do n=$$[$$(echo $$i|cut -f 1 -d '-'|sed -e 's#^0*##')]; echo "%patch$$n -p1 -b .git$$n";done
+

dead.package

@@ -1 +0,0 @@
-obsolete udev, it is replaced by systemd

mirrors

@@ -0,0 +1 @@
+ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/

sources

@@ -0,0 +1 @@
+4b37e1222f06c14c24147de346aa0bad  udev-167.tar.bz2

start_udev

@@ -0,0 +1,82 @@
+#!/bin/bash
+#
+# start_udev
+#
+# script to initialize /dev by using udev.
+#
+# Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+#
+# Released under the GPL v2 only.
+#
+# This needs to be run at the earliest possible point in the boot 
+# process.
+#
+# Based on the udev init.d script
+#
+# Thanks go out to the Gentoo developers for proving 
+# that this is possible to do.
+#
+# Yes, it's very verbose, feel free to turn off all of the echo calls,
+# they were there to make me feel better that everything was working
+# properly during development...
+#
+# don't use udev if sysfs is not mounted.
+
+# if we run with systemctl, just wait for settle
+if [ -x "$(type -P systemctl)" ]; then
+	systemctl start udev-settle.service &>/dev/null && exit 0
+fi
+
+export TZ=/etc/localtime
+
+[ -d /sys/class ] || exit 1
+[ -r /proc/mounts ] || exit 1
+[ -x /sbin/udevd ] || exit 1
+
+. /etc/init.d/functions
+
+prog=udev
+
+touch_recursive() {
+	( cd $1;
+	for i in *; do 
+		[[ -c "$i" || -b "$i" ]] && touch --no-create "$i"
+		[ -d "$i" ] && touch_recursive "$i"
+	done )
+	return 0
+}
+
+ret=0
+STRING=$"Starting $prog: "
+# propagate /dev from /sys
+echo -n "$STRING"
+
+# turn off hotplug binary calling
+if ! [ -x /sbin/hotplug ]; then
+	if [ -e /sys/kernel/uevent_helper ]; then
+		echo -e '\000\000\000\000' > /sys/kernel/uevent_helper
+	elif [ -e /proc/sys/kernel/hotplug ]; then
+		echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
+	fi
+fi
+
+/sbin/udevd -d
+
+ret=$[$ret + $?]
+
+/sbin/udevadm trigger --type=subsystems --action=add
+/sbin/udevadm trigger --type=devices --action=add
+/sbin/udevadm settle
+ret=$[$ret + $?]
+
+# touch all device files for timezone glitches
+# "find" is in /usr/bin and might not be available
+if [ -f /etc/sysconfig/clock ]; then
+	. /etc/sysconfig/clock
+	[[ "$UTC" == "false" || "$UTC" == "no" ]] \
+		&& touch_recursive /dev > "/dev/null" 2>&1 
+fi
+
+[ $ret -eq 0 ] && success $"$STRING" || failure $"$STRING"
+echo
+exit 0

udev-167-selinux_label.patch

@@ -0,0 +1,208 @@
+From 51f43b53293c4cc64c2a55598491c6cbf27b6bd5 Mon Sep 17 00:00:00 2001
+From: Kay Sievers <kay.sievers@vrfy.org>
+Date: Fri, 8 Apr 2011 01:03:49 +0200
+Subject: [PATCH] selinux: do not label files in runtime dir
+
+Do not label any files in the udev runtime directory, but only nodes,
+links and directories below /dev.
+
+In case the runtime directory falls back to /dev/.udev, label this
+directory once at udevd startup, but never anything below it.
+---
+ libudev/libudev-private.h       |    1 +
+ libudev/libudev-queue-private.c |    2 --
+ libudev/libudev-util-private.c  |   18 +++++++++++++++---
+ udev/udev-node.c                |    6 +++---
+ udev/udevd.c                    |   18 ++++++++----------
+ 5 files changed, 27 insertions(+), 18 deletions(-)
+
+diff --git a/libudev/libudev-private.h b/libudev/libudev-private.h
+index 7078b0f..8495f9a 100644
+--- a/libudev/libudev-private.h
++++ b/libudev/libudev-private.h
+@@ -220,6 +220,7 @@ uint64_t util_string_bloom64(const char *str);
+ 
+ /* libudev-util-private.c */
+ int util_create_path(struct udev *udev, const char *path);
++int util_create_path_selinux(struct udev *udev, const char *path);
+ int util_delete_path(struct udev *udev, const char *path);
+ int util_unlink_secure(struct udev *udev, const char *filename);
+ uid_t util_lookup_user(struct udev *udev, const char *user);
+diff --git a/libudev/libudev-queue-private.c b/libudev/libudev-queue-private.c
+index a714572..2f1afec 100644
+--- a/libudev/libudev-queue-private.c
++++ b/libudev/libudev-queue-private.c
+@@ -409,9 +409,7 @@ static void update_failed(struct udev_queue_export *udev_queue_export,
+ 		/* record event in the failed directory */
+ 		udev_queue_export->failed_count++;
+ 		util_create_path(udev, filename);
+-		udev_selinux_setfscreatecon(udev, filename, S_IFLNK);
+ 		symlink(udev_device_get_devpath(udev_device), filename);
+-		udev_selinux_resetfscreatecon(udev);
+ 		break;
+ 
+ 	case DEVICE_QUEUED:
+diff --git a/libudev/libudev-util-private.c b/libudev/libudev-util-private.c
+index 6b68b6a..19f979e 100644
+--- a/libudev/libudev-util-private.c
++++ b/libudev/libudev-util-private.c
+@@ -25,7 +25,7 @@
+ #include "libudev.h"
+ #include "libudev-private.h"
+ 
+-int util_create_path(struct udev *udev, const char *path)
++static int create_path(struct udev *udev, const char *path, bool selinux)
+ {
+ 	char p[UTIL_PATH_SIZE];
+ 	char *pos;
+@@ -55,7 +55,8 @@ int util_create_path(struct udev *udev, const char *path)
+ 		return err;
+ 
+ 	dbg(udev, "mkdir '%s'\n", p);
+-	udev_selinux_setfscreatecon(udev, p, S_IFDIR|0755);
++	if (selinux)
++		udev_selinux_setfscreatecon(udev, p, S_IFDIR|0755);
+ 	err = mkdir(p, 0755);
+ 	if (err != 0) {
+ 		err = -errno;
+@@ -66,10 +67,21 @@ int util_create_path(struct udev *udev, const char *path)
+ 				err = -ENOTDIR;
+ 		}
+ 	}
+-	udev_selinux_resetfscreatecon(udev);
++	if (selinux)
++		udev_selinux_resetfscreatecon(udev);
+ 	return err;
+ }
+ 
++int util_create_path(struct udev *udev, const char *path)
++{
++	return create_path(udev, path, false);
++}
++
++int util_create_path_selinux(struct udev *udev, const char *path)
++{
++	return create_path(udev, path, true);
++}
++
+ int util_delete_path(struct udev *udev, const char *path)
+ {
+ 	char p[UTIL_PATH_SIZE];
+diff --git a/udev/udev-node.c b/udev/udev-node.c
+index ab4e932..5e791ff 100644
+--- a/udev/udev-node.c
++++ b/udev/udev-node.c
+@@ -96,7 +96,7 @@ int udev_node_mknod(struct udev_device *dev, const char *file, mode_t mode, uid_
+ 	} else {
+ 		info(udev, "mknod '%s' %u:%u %#o\n", file, major(devnum), minor(devnum), mode);
+ 		do {
+-			err = util_create_path(udev, file);
++			err = util_create_path_selinux(udev, file);
+ 			if (err != 0 && err != -ENOENT)
+ 				break;
+ 			udev_selinux_setfscreatecon(udev, file, mode);
+@@ -184,7 +184,7 @@ static int node_symlink(struct udev *udev, const char *node, const char *slink)
+ 	} else {
+ 		info(udev, "creating symlink '%s' to '%s'\n", slink, target);
+ 		do {
+-			err = util_create_path(udev, slink);
++			err = util_create_path_selinux(udev, slink);
+ 			if (err != 0 && err != -ENOENT)
+ 				break;
+ 			udev_selinux_setfscreatecon(udev, slink, S_IFLNK);
+@@ -201,7 +201,7 @@ static int node_symlink(struct udev *udev, const char *node, const char *slink)
+ 	util_strscpyl(slink_tmp, sizeof(slink_tmp), slink, TMP_FILE_EXT, NULL);
+ 	unlink(slink_tmp);
+ 	do {
+-		err = util_create_path(udev, slink_tmp);
++		err = util_create_path_selinux(udev, slink_tmp);
+ 		if (err != 0 && err != -ENOENT)
+ 			break;
+ 		udev_selinux_setfscreatecon(udev, slink_tmp, S_IFLNK);
+diff --git a/udev/udevd.c b/udev/udevd.c
+index a8b339f..df5c199 100644
+--- a/udev/udevd.c
++++ b/udev/udevd.c
+@@ -822,7 +822,7 @@ static void static_dev_create_from_modules(struct udev *udev)
+ 			continue;
+ 
+ 		util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/", devname, NULL);
+-		util_create_path(udev, filename);
++		util_create_path_selinux(udev, filename);
+ 		udev_selinux_setfscreatecon(udev, filename, mode);
+ 		info(udev, "mknod '%s' %c%u:%u\n", filename, type, maj, min);
+ 		if (mknod(filename, mode, makedev(maj, min)) < 0 && errno == EEXIST)
+@@ -833,7 +833,7 @@ static void static_dev_create_from_modules(struct udev *udev)
+ 	fclose(f);
+ }
+ 
+-static int copy_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
++static int copy_dev_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
+ {
+ 	struct dirent *dent;
+ 
+@@ -886,7 +886,7 @@ static int copy_dir(struct udev *udev, DIR *dir_from, DIR *dir_to, int maxdepth)
+ 				continue;
+ 			}
+ 
+-			copy_dir(udev, dir2_from, dir2_to, maxdepth-1);
++			copy_dev_dir(udev, dir2_from, dir2_to, maxdepth-1);
+ 
+ 			closedir(dir2_to);
+ 			closedir(dir2_from);
+@@ -930,7 +930,7 @@ static void static_dev_create_from_devices(struct udev *udev, DIR *dir)
+ 	dir_from = opendir(LIBEXECDIR "/devices");
+ 	if (dir_from == NULL)
+ 		return;
+-	copy_dir(udev, dir_from, dir, 8);
++	copy_dev_dir(udev, dir_from, dir, 8);
+ 	closedir(dir_from);
+ }
+ 
+@@ -985,9 +985,7 @@ static int convert_db(struct udev *udev)
+ 
+ 	/* make sure we do not get here again */
+ 	util_create_path(udev, filename);
+-	udev_selinux_setfscreatecon(udev, udev_get_run_path(udev), S_IFDIR|0755);
+ 	mkdir(filename, 0755);
+-	udev_selinux_resetfscreatecon(udev);
+ 
+ 	/* old database */
+ 	util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/.udev/db", NULL);
+@@ -1097,9 +1095,7 @@ int main(int argc, char *argv[])
+ 	/* make sure, that our runtime dir exists and is writable */
+ 	if (utimensat(AT_FDCWD, udev_get_run_config_path(udev), NULL, 0) < 0) {
+ 		/* try to create our own subdirectory, do not create parent directories */
+-		udev_selinux_setfscreatecon(udev, udev_get_run_config_path(udev), S_IFDIR|0755);
+ 		mkdir(udev_get_run_config_path(udev), 0755);
+-		udev_selinux_resetfscreatecon(udev);
+ 
+ 		if (utimensat(AT_FDCWD, udev_get_run_config_path(udev), NULL, 0) >= 0) {
+ 			/* directory seems writable now */
+@@ -1111,8 +1107,12 @@ int main(int argc, char *argv[])
+ 			util_strscpyl(filename, sizeof(filename), udev_get_dev_path(udev), "/.udev", NULL);
+ 			if (udev_set_run_path(udev, filename) == NULL)
+ 				goto exit;
++			mkdir(udev_get_run_path(udev), 0755);
+ 		}
+ 	}
++	/* relabel runtime dir only if it resides below /dev */
++	if (strncmp(udev_get_run_path(udev), udev_get_dev_path(udev), strlen(udev_get_dev_path(udev))) == 0)
++		udev_selinux_lsetfilecon(udev, udev_get_run_path(udev), 0755);
+ 	info(udev, "runtime dir '%s'\n", udev_get_run_path(udev));
+ 
+ 	for (;;) {
+@@ -1281,9 +1281,7 @@ int main(int argc, char *argv[])
+ 		util_strscpyl(filename, sizeof(filename), udev_get_run_path(udev), "/rules.d", NULL);
+ 		if (stat(filename, &statbuf) != 0) {
+ 			util_create_path(udev, filename);
+-			udev_selinux_setfscreatecon(udev, filename, S_IFDIR|0755);
+ 			mkdir(filename, 0755);
+-			udev_selinux_resetfscreatecon(udev);
+ 		}
+ 		inotify_add_watch(pfd[FD_INOTIFY].fd, filename,
+ 				  IN_DELETE | IN_MOVE | IN_CLOSE_WRITE);
+-- 
+1.7.4.4
+
+

udev-olpc-keymap-update.patch

@@ -0,0 +1,65 @@
+From 00fc377e7a6b1997db346c8de51cbf05cad48376 Mon Sep 17 00:00:00 2001
+From: Paul Fox <pgf@laptop.org>
+Date: Mon, 22 Aug 2011 06:39:06 +0200
+Subject: [PATCH] keymap: update the OLPC keymap for correct function key
+ behavior
+
+New mappings were needed when the mechanical keyboard was
+introduced, and GNOME was made a peer to the sugar desktop.
+see http://lists.laptop.org/pipermail/devel/2010-July/029384.html
+---
+ extras/keymap/keymaps/olpc-xo |   38 ++++++++++++++++++++++++++------------
+ 1 files changed, 26 insertions(+), 12 deletions(-)
+
+diff --git a/extras/keymap/keymaps/olpc-xo b/extras/keymap/keymaps/olpc-xo
+index 7fe0662..34434a1 100644
+--- a/extras/keymap/keymaps/olpc-xo
++++ b/extras/keymap/keymaps/olpc-xo
+@@ -2,18 +2,32 @@
+ 0x81 fn_esc
+ 0xF9 camera
+ 0xF8 sound # Fn-CAMERA = Mic
+-0xBB fn_f1
+-0xBC fn_f2
+-0xBD fn_f3
+-0xBE fn_f4
+-0xBF fn_f5
+-0xC0 fn_f6
+-0xC1 fn_f7
+-0xC2 fn_f8
+-0xC3 fn_f9
+-0xC4 fn_f10
+-0xD7 fn_f11
+-0xD8 fn_f12
++
++
++# Function key mappings, as per
++#    http://dev.laptop.org/ticket/10213#comment:20
++#
++# Unmodified F1-F8 produce F1-F8, so no remap necessary.
++# Unmodified F9-F12 control brightness and volume.
++0x43 brightnessdown
++0x44 brightnessup
++0x57 volumedown
++0x58 volumeup
++
++# fn-modified fkeys all produce the unmodified version of the key.
++0xBB f1
++0xBC f2
++0xBD f3
++0xBE f4
++0xBF f5
++0xC0 f6
++0xC1 f7
++0xC2 f8
++0xC3 f9
++0xC4 f10
++0xD7 f11
++0xD8 f12
++
+ 
+ # Using F13-F21 for the .5 F keys right now.
+ 0xF7 f13
+-- 
+1.7.4.4
+