Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild

not an rule

.gitignore

@@ -1,12 +1 @@
-usb-modeswitch-1.1.3.tar.bz2
-usb-modeswitch-1.1.4.tar.bz2
-/usb-modeswitch-1.1.6.tar.bz2
-/usb-modeswitch-1.1.7.tar.bz2
-/usb-modeswitch-1.1.9.tar.bz2
-/device_reference.txt
-/usb-modeswitch-1.2.0.tar.bz2
-/usb-modeswitch-1.2.1.tar.bz2
-/usb-modeswitch-1.2.2.tar.bz2
-/usb-modeswitch-1.2.4.tar.bz2
-/usb-modeswitch-1.2.5.tar.bz2
-/usb-modeswitch-1.2.7.tar.bz2
+/usb-modeswitch-*.tar.bz2

device_reference-utf8.patch

@@ -0,0 +1,74 @@
+--- device_reference.txt	2014-05-29 22:18:46.000000000 +0200
++++ device_reference_utf8.txt	2014-11-24 20:51:17.647221466 +0100
+@@ -60,7 +60,7 @@
+ ########################################################
+ # Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
+ #
+-# Contributor: Bernd Holzmüller
++# Contributor: Bernd Holzmüller
+ 
+ DefaultVendor=  0x05c6
+ DefaultProduct= 0x1000
+@@ -279,7 +279,7 @@
+ #
+ # Probably works with DetachStorageOnly too
+ #
+-# Contributor: Flávio Moringa and others
++# Contributor: Flávio Moringa and others
+ 
+ DefaultVendor=  0x19d2
+ DefaultProduct= 0x2000
+@@ -777,7 +777,7 @@
+ #
+ # Recommended init command: ATE0V1&D2&C1S0=0
+ #
+-# Contributor: Jérôme Oufella
++# Contributor: Jérôme Oufella
+ 
+ DefaultVendor=  0x1004
+ DefaultProduct= 0x1000
+@@ -1336,7 +1336,7 @@
+ ########################################################
+ # LG HDM-2100 (EVDO Rev.A USB modem)
+ #
+-# Contributor: Jérôme Oufella
++# Contributor: Jérôme Oufella
+ 
+ DefaultVendor= 0x1004
+ DefaultProduct=0x607f
+@@ -1641,7 +1641,7 @@
+ ########################################################
+ # Huawei U8110 / U8300 / Joy, Vodafone 845 (Android smartphone)
+ #
+-# Contributor: David Erosa García
++# Contributor: David Erosa García
+ 
+ DefaultVendor= 0x12d1
+ DefaultProduct=0x1031
+@@ -1658,7 +1658,7 @@
+ ########################################################
+ # Nokia CS-10
+ #
+-# Contributor: Wacław Sierek
++# Contributor: Wacław Sierek
+ 
+ DefaultVendor= 0x0421
+ DefaultProduct=0x060c
+@@ -1700,7 +1700,7 @@
+ #######################################################
+ # Samsung GT-B3730
+ #
+-# Contributor: Per Øyvind Karlsen
++# Contributor: Per Øyvind Karlsen
+ 
+ DefaultVendor= 0x04e8
+ DefaultProduct=0x689a
+@@ -1771,7 +1771,7 @@
+ #######################################################
+ # Huawei EC168C (from Zantel)
+ #
+-# Contributor: Ã…smund Hjulstad
++# Contributor: Åsmund Hjulstad
+ 
+ DefaultVendor= 0x12d1
+ DefaultProduct=0x1446

rhbz948451-fix-manual-pages.patch

@@ -1,99 +0,0 @@
-diff -up usb-modeswitch-1.2.7/usb_modeswitch.1.fix-manual-pages usb-modeswitch-1.2.7/usb_modeswitch.1
---- usb-modeswitch-1.2.7/usb_modeswitch.1.fix-manual-pages	2013-08-20 12:07:24.292188457 +0200
-+++ usb-modeswitch-1.2.7/usb_modeswitch.1	2013-08-20 12:30:41.606556395 +0200
-@@ -48,10 +48,12 @@ Product ID to look for (mandatory)
- Target vendor ID. When given will be searched for and detected initially
- for information purposes. If success checking (option \-s) is active,
- providing target IDs (vendor/product) or target class is recommended
-+.IP "\fB-j\fP \fB\-\-find-mbim\fP         " 10
-+Return configuration number with MBIM interface and exit.
- .IP "\fB-P\fP \fB\-\-target-product NUM\fP         " 10
- Target product ID
--.IP "\fB-b\fP \fB\-\-busnum NUM\fP         " 10
--.IP "\fB-g\fP \fB\-\-devnum NUM\fP         " 10
-+.IP "\fB-b\fP \fB\-\-bus-num NUM\fP         " 10
-+.IP "\fB-g\fP \fB\-\-device-num NUM\fP         " 10
- If bus and device number are provided, the handling of a specific device on
- a specific USB port is guaranteed, in contrast to using only the USB ID. This
- is important if there are multiple similar devices on a system
-@@ -110,7 +112,7 @@ Send a special control message used by P
- .IP "\fB-Z\fP \fB\-\-blackberry-mode\fP         " 10
- Send a special control message used by Blackberry devices
- .IP "\fB-O\fP \fB\-\-sony-mode\fP         " 10
--Apply a special sequence used by Sony Ericsson devices. Implies option \--success
-+Apply a special sequence used by Sony Ericsson devices. Implies option \--check-success
- .IP "\fB-L\fP \fB\-\-cisco-mode\fP         " 10
- Send a sequence of bulk messages used by Cisco devices
- .IP "\fB-R\fP \fB\-\-reset-usb\fP         " 10
-@@ -119,7 +121,7 @@ method or stand alone. It is always done
- interactions.
- Few devices need it to complete the switching; apart from that it may be
- useful during testing
--.IP "\fB-c\fP \fB\-\-config FILENAME\fP         " 10
-+.IP "\fB-c\fP \fB\-\-config-file FILENAME\fP         " 10
- Use a specific config file. If any ID or switching options are given as
- command line parameters, this option is ignored.
- In that case all mandatory parameters have to be provided on
-@@ -138,7 +140,7 @@ Print all settings before running and sh
- Changes the behaviour of the program slightly. A success message including the
- effective target device ID is put out and a syslog notice is issued. Mainly for
- integration with a wrapper script
--.IP "\fB-s\fP \fB\-\-success NUM\fP         " 10
-+.IP "\fB-s\fP \fB\-\-check-success NUM\fP         " 10
- After switching, keep checking for the result up to max. NUM seconds. If target IDs
- or target class were provided, their appearance indicates certain success. Otherwise
- the disconnection of the original device is rated as likely proof
-diff -up usb-modeswitch-1.2.7/usb_modeswitch.c.fix-manual-pages usb-modeswitch-1.2.7/usb_modeswitch.c
---- usb-modeswitch-1.2.7/usb_modeswitch.c.fix-manual-pages	2013-08-20 12:12:10.752953754 +0200
-+++ usb-modeswitch-1.2.7/usb_modeswitch.c	2013-08-20 12:37:27.415242925 +0200
-@@ -1968,11 +1968,12 @@ void printHelp()
- 	" -V, --target-vendor NUM       target mode vendor ID (optional)\n"
- 	" -P, --target-product NUM      target mode product ID (optional)\n"
- 	" -C, --target-class NUM        target mode device class (optional)\n"
--	" -b, --busnum NUM              system bus number of device (for hard ID)\n"
--	" -g, --devnum NUM              system device number (for hard ID)\n"
-+	" -b, --bus-num NUM             system bus number of device (for hard ID)\n"
-+	" -g, --device-num NUM          system device number (for hard ID)\n"
- 	" -m, --message-endpoint NUM    direct the message transfer there (optional)\n"
- 	" -M, --message-content <msg>   message to send (hex number as string)\n"
--	" -2 <msg>, -3 <msg>            additional messages to send (-n recommended)\n"
-+	" -2, --message-content2 <msg>  additional messages to send (-n recommended)\n"
-+	" -3, --message-content3 <msg>  additional messages to send (-n recommended)\n"
- 	" -n, --need-response           read response to the message transfer (CSW)\n"
- 	" -r, --response-endpoint NUM   read response from there (optional)\n"
- 	" -d, --detach-only             detach the active driver, no further action\n"
-@@ -1989,10 +1990,11 @@ void printHelp()
- 	" -Z, --blackberry-mode         apply a special procedure\n"
- 	" -F, --pantech-mode            apply a special procedure\n"
- 	" -R, --reset-usb               reset the device after all other actions\n"
-+	" -w, --release-delay <seconds> delay releasing the interface\n"
- 	" -Q, --quiet                   don't show progress or error messages\n"
- 	" -W, --verbose                 print all settings and debug output\n"
- 	" -D, --sysmode                 specific result and syslog message\n"
--	" -s, --success <seconds>       switching result check with timeout\n"
-+	" -s, --check-success <seconds> switching result check with timeout\n"
- 	" -I, --no-inquire              do not get SCSI attributes (default on)\n\n"
- 	" -c, --config-file <filename>  load long configuration from file\n\n"
- 	" -t, --stdinput                read long configuration from stdin\n\n"
-diff -up usb-modeswitch-1.2.7/usb_modeswitch_dispatcher.1.fix-manual-pages usb-modeswitch-1.2.7/usb_modeswitch_dispatcher.1
---- usb-modeswitch-1.2.7/usb_modeswitch_dispatcher.1.fix-manual-pages	2013-08-20 11:59:15.467713141 +0200
-+++ usb-modeswitch-1.2.7/usb_modeswitch_dispatcher.1	2013-08-20 12:57:51.913947292 +0200
-@@ -0,0 +1,18 @@
-+.TH "USB_MODESWITCH_DISPATCHER" "1"
-+.SH "NAME"
-+usb_modeswitch_dispatcher - dispatcher not intended for direct invocation.
-+.SH "SYNOPSIS"
-+.PP
-+\fBusb_modeswitch_dispatcher\fR
-+.SH "DESCRIPTION"
-+.PP
-+usb_modeswitch_dispatcher is doing additional device checking and
-+using the usb_modeswitch binary to switch with the selected device config file.
-+If no drivers are taking care of the device after the mode switch, the dispatcher
-+will try to load and bind the "option" serial driver, in order to make the device
-+usable.
-+.PP
-+This program is called by udev and is not supposed to be called directly
-+by the user.
-+.SH SEE ALSO
-+.BR usb_modeswitch(1).

sources

@@ -1,2 +1 @@
-18d889d72195534ae9133a8181cad42b  usb-modeswitch-1.2.7.tar.bz2
-dd14f254f6c3642ce16fd7c2f43ee112  device_reference.txt
+SHA512 (usb-modeswitch-2.6.2.tar.bz2) = adaedf89de3c5f9dc55da7bb5bb3fe8165c0424cffacb00f83876094b7abdc386ced9959e5dbdf46ab06aa1d03fbfca13df539421489ef4d2dd0f72742057f3d

usb_modeswitch-2.6.2-SIGTERM.patch

@@ -0,0 +1,49 @@
+From e3cf80c95a1c67d05dded68ec171bfde4686003f Mon Sep 17 00:00:00 2001
+From: Lubomir Rintel <lkundrak@v3.sk>
+Date: Thu, 14 Aug 2025 16:35:56 +0200
+Subject: [PATCH] service: Do not ever send SIGTERM to the unit
+
+Following happens when modem 03f0:a31d (HP lt4132 LTE/HSPA+ 4G Module) is
+plugged:
+
+- systemd-udevd emits "add" action
+- The "add" action triggers restart of usb_modeswitch@<port>.service
+- usb_modeswitch@<port>.service starts usb_modeswitch
+- Another udev rule renames the network interface from usb0 to enp0...
+- Above causes systemd-udevd emit "change" action for the device
+- The "change" action triggers another restart of usb_modeswitch@<port>.service
+- usb_modeswitch run initially gets terminated mid-air
+- Device drops off the bus
+- Infinite sadness
+
+Possible solutions:
+
+- The udev rule could just emit the "change" action. I have no idea why
+  it handles "change" actions, but it looks intentional -> No touchy
+  from me.
+- usb_modeswitch could just trap TERM and shut down gracefully. This
+  involves Tcl -> No touchy.
+- The systemd unit could just send an innocent signal instead of TERM
+  and just let usb_modeswitch end its life journey naturally.
+  Let's do this, because it involves least brain.
+
+Anybody please feel free to send this upstream.
+---
+ usb_modeswitch@.service | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/usb_modeswitch@.service b/usb_modeswitch@.service
+index 22d2ea7..23d4ed0 100644
+--- a/usb_modeswitch@.service
++++ b/usb_modeswitch@.service
+@@ -7,3 +7,7 @@ ExecStart=/usr/sbin/usb_modeswitch_dispatcher --switch-mode %i
+ # Testing
+ #ExecStart=/bin/echo "usb_modeswitch.service: device name is %i"
+ 
++# Do not ever terminate violently on restart -- interrupting the switching
++# transaction will crash some modems! We'll terminate shortly anyways.
++# If we hang, FinalKillSignal (defaults to SIGKILL) will take care of that.
++KillSignal=SIGCONT
+-- 
+2.50.1
+

usb_modeswitch.spec

@@ -1,27 +1,38 @@
-%define source_name	usb-modeswitch
+%define source_name usb-modeswitch
 
-Name:		usb_modeswitch
-Version:	1.2.7
-Release:	3%{?dist}
-Summary:	USB Modeswitch gets mobile broadband cards in operational mode
-Summary(de):	USB Modeswitch aktiviert UMTS-Karten
-Group:		Applications/System
-License:	GPLv2+
-URL:		http://www.draisberghof.de/usb_modeswitch/
-Source0:	http://www.draisberghof.de/%{name}/%{source_name}-%{version}.tar.bz2
-Source1:	http://www.draisberghof.de/usb_modeswitch/device_reference.txt
-Patch0:		rhbz948451-fix-manual-pages.patch
-Requires:	usb_modeswitch-data >= 20121109
-BuildRequires:	libusb-devel
+Name:       usb_modeswitch
+Version:    2.6.2
+Release:    6%{?dist}
+Summary:    USB Modeswitch gets mobile broadband cards in operational mode
+Summary(de):    USB Modeswitch aktiviert UMTS-Karten
+License:    GPL-2.0-or-later
+URL:        http://www.draisberghof.de/usb_modeswitch/
+
+Source0:    http://www.draisberghof.de/%{name}/%{source_name}-%{version}.tar.bz2
+Source1:    http://www.draisberghof.de/usb_modeswitch/device_reference.txt
+
+# Submitted upstream (2014-11-24)
+Patch0: device_reference-utf8.patch
+# Not submitted upstream due to lack of courage
+Patch1: usb_modeswitch-2.6.2-SIGTERM.patch
+
+BuildRequires:  make
+BuildRequires:  gcc
+BuildRequires:  libusbx-devel
+# "tcl" or "jimsh"), use the light-weight installation:
+#BuildRequires: jimtcl-devel
+BuildRequires:  systemd
+Requires:   usb_modeswitch-data >= 20121109
+Requires:   systemd
 
 %description
 USB Modeswitch brings up your datacard into operational mode. When plugged
 in they identify themselves as cdrom and present some non-Linux compatible
-installation files. This tool deactivates this cdrom-devices and enables
+installation files. This tool deactivates this cdrom-device and enables
 the real communication device. It supports most devices built and
 sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.
 
-%description	-l de
+%description    -l de
 USB Modeswitch deaktiviert die CDROM-Emulation einiger UMTS-Karten.
 Dadurch erkennt Linux die Datenkarte und kann damit Internet-
 Verbindungen aufbauen. Die gängigen Karten von Huawei, T-Mobile,
@@ -31,46 +42,195 @@ Vodafone, Option, ZTE und Novatell werden unterstützt.
 %prep
 %setup -q -n %{source_name}-%{version}
 cp -f %{SOURCE1} device_reference.txt
-%patch0 -p1 -b .fix-manual-pages
 
-# convert device_reference.txt encoding to UTF-8
-iconv --from=ISO-8859-1 --to=UTF-8 device_reference.txt > device_reference.txt.new && \
-touch -r device_reference.txt device_reference.txt.new && \
-chmod 644 device_reference.txt && \
-mv device_reference.txt.new device_reference.txt
+%patch 0 -p0
+%patch 1 -p1
+
 
 %build
-CFLAGS="$RPM_OPT_FLAGS" make %{?_smp_mflags} static
+%{set_build_flags}
+# this will require jimtcl-devel
+#make_build all-with-dynlink-dispatcher
+%make_build
 
 
 %install
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/udev
-mkdir -p $RPM_BUILD_ROOT%{_sbindir}
-mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
-
-install -p -m 755 usb_modeswitch $RPM_BUILD_ROOT%{_sbindir}/
-install -p -m 755 usb_modeswitch_dispatcher $RPM_BUILD_ROOT%{_sbindir}/usb_modeswitch_dispatcher
-install -p -m 644 usb_modeswitch.conf $RPM_BUILD_ROOT%{_sysconfdir}/
-gzip -9c usb_modeswitch.1 > usb_modeswitch.1.gz && install -m 644 usb_modeswitch.1.gz $RPM_BUILD_ROOT%{_datadir}/man/man1
-gzip -9c usb_modeswitch_dispatcher.1 > usb_modeswitch_dispatcher.1.gz && install -m 644 usb_modeswitch_dispatcher.1.gz $RPM_BUILD_ROOT%{_datadir}/man/man1
-install -p -m 755 usb_modeswitch.sh $RPM_BUILD_ROOT%{_prefix}/lib/udev/usb_modeswitch
-
+mkdir -p %{buildroot}%{_unitdir}
+%make_install \
+    SYSDIR=%{buildroot}%{_unitdir} \
+    SBINDIR=%{buildroot}%{_sbindir} \
+    UDEVDIR=%{buildroot}%{_prefix}/lib/udev
 
 
 %files
-%defattr(-,root,root,-)
 %{_sbindir}/usb_modeswitch
 %{_sbindir}/usb_modeswitch_dispatcher
 %{_mandir}/man1/usb_modeswitch.1.gz
 %{_mandir}/man1/usb_modeswitch_dispatcher.1.gz
 %{_prefix}/lib/udev/usb_modeswitch
+%{_unitdir}/usb_modeswitch@.service
 %config(noreplace) %{_sysconfdir}/usb_modeswitch.conf
-%doc COPYING README ChangeLog device_reference.txt 
+%doc README ChangeLog device_reference.txt
+%license COPYING
 
 
 %changelog
+* Fri Jul 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.2-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild
+
+* Sat Jan 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.2-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+
+* Thu Aug 14 2025 Lubomir Rintel <lkundrak@v3.sk> - 2.6.2-4
+- Do not let the unit send SIGTERM to usb_modeswitch mid-switch.
+
+* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Thu Feb 27 2025 Sérgio Basto <sergio@serjux.com> - 2.6.2-2
+- Revert the move of usb_modeswitch to /usr/lib/udev/rules.d, usb_modeswitch is
+  not an rule
+
+* Thu Feb 20 2025 Sérgio Basto <sergio@serjux.com> - 2.6.2-1
+- Update usb_modeswitch to 2.6.2
+- Resolves: rhbz#2346392
+- Fix build related to /usr/sbin move
+
+* Sun Jan 19 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-11
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Sat Jan 27 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-10
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Thu Nov  2 2023 Íñigo Huguet <ihuguet@redhat.com> - 2.6.1-9
+- Really use SPDX license specifier
+
+* Thu Aug 24 2023 Till Maas <opensource@till.name> - 2.6.1-8
+- Cleanup spec: use %%license, use %%patch 0
+- Use spdx license specifier
+
+* Sat Jul 22 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Sat Jan 21 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Sat Jul 23 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Sat Jan 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Wed Nov 18 2020 Sérgio Basto <sergio@serjux.com> - 2.6.1-1
+- Update usb_modeswitch to 2.6.1
+- Drop patch1, http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?f=2&t=2733
+- Drop BR jimtcl-devel, if we don't install dynlink-dispatcher
+
+* Tue Sep 29 2020 Sérgio Basto <sergio@serjux.com> - 2.6.0-3
+- Use make macros (https://src.fedoraproject.org/rpms/usb_modeswitch/pull-request/1)
+- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
+
+* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Tue Mar 24 2020 Lubomir Rintel <lkundrak@v3.sk> - 2.6.0-1
+- New 2.6.0 release
+
+* Fri Jan 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.2-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.2-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Wed Feb 28 2018 Lubomir Rintel <lkundrak@v3.sk> - 2.5.2-1
+- New 2.5.2 release
+
+* Fri Feb 23 2018 Florian Weimer <fweimer@redhat.com> - 2.5.1-3
+- Use LDFLAGS from redhat-rpm-config
+
+* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Fri Aug 18 2017 Lubomir Rintel <lkundrak@v3.sk> - 2.5.1-1
+- New 2.5.1 release
+
+* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.0-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+
+* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.0-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.0-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Fri Jul 29 2016 Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-5
+- Bump the release number to be higher than in Fedora 24
+
+* Thu Jul 21 2016 Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-3
+- Fix undefined behavior in config parser (rh #1352055)
+
+* Wed Jul 20 2016 Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-2
+- Add the previously omitted systemd service file (rh #1352055)
+- Fix crash with invalid arguments (rh #1358472)
+
+* Wed Jun 22 2016 Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-1
+- New 2.4.0 release
+
+* Tue May 03 2016 Lubomir Rintel <lkundrak@v3.sk> - 2.3.0-1
+- New 2.3.0 release
+
+* Fri Feb 05 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.5-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Tue Aug 18 2015 Lubomir Rintel <lkundrak@v3.sk> - 2.2.5-1
+- New 2.2.5 release
+
+* Fri Jun 19 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.2.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Sun Feb 22 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2.2.1-1
+- New 2.2.1 release
+
+* Mon Nov 24 2014 Till Maas <opensource@till.name> - 2.2.0-2
+- Update device_reference.txt, make it proper UTF-8
+
+* Tue Aug 26 2014 Robert M. Albrecht <mail@romal.de> - 2.2.0-1
+- New upstream release
+- Fixed a typo in the description
+
+* Mon Aug 18 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Wed Apr 16 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2.1.1-1
+- Update to 2.1.1
+
+* Tue Jan 28 2014 Dan Williams <dcbw@redhat.com> - 2.0.1-2
+- Resurrect manpage patch
+
+* Mon Jan  6 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2.0.1-1
+- Update to 2.0.1 and build against libusbx (RHBZ 994974)
+- Use distro jimtcl (RHBZ 967314)
+- Fix build on aarch64
+- Cleanup and modernise spec
+
 * Wed Aug 28 2013 Thomas Haller <thaller@redhat.com> 1.2.7-3
 - Add manual page for usb_modeswitch_dispatcher and fix errors in
   manual page of usb_modeswitch (rhbz#948451, rhbz#884203).
@@ -128,68 +288,3 @@ install -p -m 755 usb_modeswitch.sh $RPM_BUILD_ROOT%{_prefix}/lib/udev/usb_modes
 
 * Thu Dec 30 2010 Dan Williams <dcbw@redhat.com> 1.1.6-1
 - New upstream version
-
-* Tue Aug 24 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> 1.1.4-1
-- New upstream version
-
-* Tue Jun 22 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> 1.1.3-1
-- New upstream
-
-* Fri Apr 23 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> - 1.1.2-3
-- Fix typo in binary location
-
-* Fri Apr 23 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> - 1.1.2-2
-- Move usb_modeswitch binary back to /usr/sbin
-- Package /etc/usb_modeswitch.setup for manual mode
-
-* Tue Apr 20 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> - 1.1.2-1
-- New upstream
-- Split data and main package
-
-* Mon Mar 8 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> - 1.1.0-6
-- Version bump for F-12 build
-
-* Sat Mar 6 2010 Huzaifa Sidhpurwala <huzaifas@redaht.com> - 1.1.0-5
-- Fix regression in rhbz #571001
-- Version bump
-
-* Thu Mar 4 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> 1.1.0-3
-- Patch usb_modeswitch to use the binary from /usr/bin/
-- usb_modeswitch-data needs tcl
-
-* Tue Mar 2 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> 1.1.0-2
-- Reload udev when new rules are installed
-
-* Tue Mar 2 2010 Huzaifa Sidhpurwala <huzaifas@redhat.com> 1.1.0-1
-- New upstream 1.1.0 release
-- Split package into binary and data part
-
-* Thu Sep 17 2009 Peter Robinson <pbrobinson@gmail.com> 1.0.5-1
-- new upstream 1.0.5 release
-
-* Sun Aug 02 2009 Robert M. Albrecht <fedora@romal.de> 1.0.2-1
-- new upstream release
-
-* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.9.6-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
-
-* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.9.6-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
-
-* Sun Jan 11 2009 Robert M. Albrecht <fedora@romal.de> 0.9.6-1
-* new upstream release
-
-* Sat Dec 13 2008 Robert M. Albrecht <fedora@romal.de> 0.9.5-1
-* new upstream release
-
-* Sun Jun 22 2008 Robert M. Albrecht <romal@gmx.de> 0.9.4-2
-- Fixed some rpmlint errors
-- Added german translation
-
-* Sun Jun 22 2008 Robert M. Albrecht <romal@gmx.de> 0.9.4-1
-- Update to 0.9.4
-- Honor RPM_OPT_FLAGS
-  
-* Mon May 26 2008 Robert M. Albrecht <romal@gmx.de> 0.9.4-0.1.beta2
-- First package Release
-