Orphaned for 6+ weeks

Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>

.gitignore

@@ -1 +0,0 @@
-wb_builder-1.0.3.tar.gz

dead.package

@@ -0,0 +1 @@
+Orphaned for 6+ weeks

sources

@@ -1 +0,0 @@
-9bad12675121a7d09467ad847b79b539  wb_builder-1.0.3.tar.gz

wb_builder-args.patch

@@ -1,95 +0,0 @@
---- wishbone.pl	2009-08-30 11:36:15.520240129 +0200
-+++ wishbone.pl_mod	2009-09-03 07:01:29.148541129 +0200
-@@ -191,6 +191,7 @@
- };
- 
- sub read_defines {
-+my $arg = @ARGV;
- $priority=0;
- $masters=0;
- $slaves=0;
-@@ -225,10 +226,10 @@
-   if ($a =~ /^(interconnect)( *)(=)( *)(crossbarswitch|sharedbus)(;?)$/) {
-     $interconnect = $5; }
- 
--  if ($a =~ /^(signal_groups)( *)(=)( *)([0-1])(;?)($*)/) {
-+  if ($a =~ /^(signal_groups)( *)(=)( *)([0-1])(;?)($arg)/) {
-     $signal_groups = $5; };
- 
--  if ($a =~ /^(use_cyc_sel)( *)(=)( *)([0-1])(;?)($*)/) {
-+  if ($a =~ /^(use_cyc_sel)( *)(=)( *)([0-1])(;?)($arg)/) {
-     $use_cyc_sel = $5; };
- 
-   if ($a =~ /^(mux_type)( *)(=)( *)(mux|andor|tristate)(;?)$/) {
-@@ -237,7 +238,7 @@
-   if ($a =~ /^(optimize)( *)(=)( *)(speed|area);?$/) {
-     $optimize = $5; };
- 
--  if ($a =~ /^(dat_size|adr_size|tgd_bits|tga_bits|tgc_bits|granularity)( *)(=)( *)([0-9]+)(;?)($*)/) {
-+  if ($a =~ /^(dat_size|adr_size|tgd_bits|tga_bits|tgc_bits|granularity)( *)(=)( *)([0-9]+)(;?)($arg)/) {
-     $dat_size    = $5 if $1 eq 'dat_size';
-     $adr_size    = $5 if $1 eq 'adr_size';
-     $tgd_bits    = $5 if $1 eq 'tgd_bits';
-@@ -246,20 +247,20 @@
-     $granularity = $5 if $1 eq 'granularity';
-   };
- 
--  if ($a =~ /^(rename)(_)(tga|tgc|tgd)( *)(=)( *)([a-zA-Z_-]+)(;?)($*)/) {
-+  if ($a =~ /^(rename)(_)(tga|tgc|tgd)( *)(=)( *)([a-zA-Z_-]+)(;?)($arg)/) {
-     if ($3 eq "tga"){$rename_tga=$7};
-     if ($3 eq "tgc"){$rename_tgc=$7};
-     if ($3 eq "tgd"){$rename_tgd=$7};
-   };
- 
-   # master port setup
--  if ($a =~ /^(master)( *)([A-Za-z0-9_-]+)($*)/) {
-+  if ($a =~ /^(master)( *)([A-Za-z0-9_-]+)($arg)/) {
-     if($1 eq "master") {
-       master_init($3);
-     };
-     $a = <FILE>;
--    until ($a =~ /^(end master)($*)/) {
--      if ($a =~ /^( *)(dat_size|adr_o_hi|adr_o_lo|lock_o|err_i|rty_i|tga_o|tgc_o|priority)( *)(=)( *)(0x)?([0-9a-fA-F]*)(;?)($*)/) {
-+    until ($a =~ /^(end master)($arg)/) {
-+      if ($a =~ /^( *)(dat_size|adr_o_hi|adr_o_lo|lock_o|err_i|rty_i|tga_o|tgc_o|priority)( *)(=)( *)(0x)?([0-9a-fA-F]*)(;?)($arg)/) {
-         $master[$masters]{"$2"}=$7;
-         if (($2 eq "rty_i") && ($7 == 1)) {
-           $rty_i++; };
-@@ -273,23 +274,23 @@
-         if ($2 eq "priority") {
-           $priority += $7; };
-       }; #end if
--      if ($a =~ /^( *)(type)( *)(=)( *)(ro|wo|rw)(;?)($*)/) {
-+      if ($a =~ /^( *)(type)( *)(=)( *)(ro|wo|rw)(;?)($arg)/) {
-         $master[$masters]{"$2"}=$6; };
-       # priority for crossbarswitch
--      if ($a =~ /^( *)(priority)(_)([0-9a-zA-Z_]*)( *)(=)( *)([0-9]*)(;?)($*)/) {
-+      if ($a =~ /^( *)(priority)(_)([0-9a-zA-Z_]*)( *)(=)( *)([0-9]*)(;?)($arg)/) {
-         $master[$masters]{("priority_"."$4")}=$8; };
-       $a = <FILE>;
-     };
-   };
- 
-   # slave port setup
--  if ($a =~ /^(slave)( *)([A-Za-z0-9_-]+)($*)/) {
-+  if ($a =~ /^(slave)( *)([A-Za-z0-9_-]+)($arg)/) {
-     if ($1 eq "slave") {
-       slave_init($3);
-     };
-     $a = <FILE>;
--    until ($a =~ /^(end slave)($*)/) {
--      if ($a =~ /^( *)(dat_i|dat_o|sel_i|adr_i_hi|adr_i_lo|lock_i|tga_i|tgc_i|err_o|rty_o|baseadr|size|baseadr1|size1|baseadr2|size2|baseadr3|size3|cyc_i)( *)(=)( *)(0x)?([0-9a-fA-F]+)(;?)($*)/) {
-+    until ($a =~ /^(end slave)($arg)/) {
-+      if ($a =~ /^( *)(dat_i|dat_o|sel_i|adr_i_hi|adr_i_lo|lock_i|tga_i|tgc_i|err_o|rty_o|baseadr|size|baseadr1|size1|baseadr2|size2|baseadr3|size3|cyc_i)( *)(=)( *)(0x)?([0-9a-fA-F]+)(;?)($arg)/) {
-         $slave[$slaves]{"$2"}=$7;
-         if (($2 eq "rty_o") && ($7 == 1)) {
-           $rty_o++; };
-@@ -300,7 +301,7 @@
-         if (($2 eq "tga_i") && ($7 == 1)) {
-           $tga_i++; };
-       }; #end if
--      if ($a =~ /^( *)(type)( *)(=)( *)(ro|wo|rw)(;?)($*)/) {
-+      if ($a =~ /^( *)(type)( *)(=)( *)(ro|wo|rw)(;?)($arg)/) {
-         $slave[$slaves]{"$2"}=$6; };
-       $a = <FILE>;
-     };

wb_builder-strict-warnings.patch

@@ -1,95 +0,0 @@
---- wishbone.pl~	2006-11-28 01:22:43.000000000 +0530
-+++ wishbone.pl	2009-08-29 22:32:53.684609104 +0530
-@@ -66,21 +66,24 @@
- use Time::Local;
- use Getopt::Long;
- 
-+use strict;
-+use warnings;
-+
- # description: users manual
- 
- my $version='1.0.3';
- my $infile = "wishbone.defines";
--my $outfile = wb;
-+my $outfile = "wb";
- 
- my $a;
- my $i=0;
- my $j=0;
- 
- # default settings
--my $syscon=syscon;
--my $intercon=intercon;
-+my $syscon="syscon";
-+my $intercon="intercon";
- my $target="generic";
--my $hdl=vhdl;
-+my $hdl="vhdl";
- my $ext=".vhd";
- my $signal_groups=0;
- my $comment="--";
-@@ -121,7 +124,24 @@
- my $amp=0;
- my $asp=0;
- my $del=0;
--my $i;
-+#my $i;
-+
-+my @master;
-+my @slave;
-+my $frame;
-+my $c;
-+my $am;
-+my $ind;
-+my $tmp;
-+my $depend;
-+my $l;
-+my $only_master;
-+my $k;
-+my $noGUI;
-+my $genHeader;
-+my $help;
-+my $file = "";
-+my $tmp1;
- 
- # open input file
- #if (open(FILE,"<$file")) {
-@@ -804,7 +824,8 @@
- };
- 
- sub generate_defines {
--  open(OUTFILE,"> $_[0]") or die "could not open $infile for writing";
-+  $infile = $_[0];
-+  open(OUTFILE,">$infile") or die "could not open $infile for writing";
-   printf OUTFILE "# Generated by PERL program wishbone.pl.\n";
-   printf OUTFILE "# File used as input for wishbone arbiter generation\n";
-   $tmp=localtime(time);
-@@ -884,13 +905,13 @@
-   printf OUTFILE "%s\n%s Wishbone slaves:\n",$comment,$comment;
-   for ($i=1; $i <= $slaves; $i++) {
-     printf OUTFILE "%s   %s\n",$comment,$slave[$i]{"wbs"};
--    if ($slave[$i]{"size"} ne ffffffff) {
-+    if ($slave[$i]{"size"} ne "ffffffff") {
-       printf OUTFILE "%s     baseadr 0x%s - size 0x%s\n",$comment,$slave[$i]{"baseadr"},$slave[$i]{"size"}};
--    if ($slave[$i]{"size1"} ne ffffffff) {
-+    if ($slave[$i]{"size1"} ne "ffffffff") {
-       printf OUTFILE "%s     baseadr 0x%s - size 0x%s\n",$comment,$slave[$i]{"baseadr1"},$slave[$i]{"size1"}};
--    if ($slave[$i]{"size2"} ne ffffffff) {
-+    if ($slave[$i]{"size2"} ne "ffffffff") {
-       printf OUTFILE "%s     baseadr 0x%s - size 0x%s\n",$comment,$slave[$i]{"baseadr2"},$slave[$i]{"size2"}};
--    if ($slave[$i]{"size3"} ne ffffffff) {
-+    if ($slave[$i]{"size3"} ne "ffffffff") {
-       printf OUTFILE "%s     baseadr 0x%s - size 0x%s\n",$comment,$slave[$i]{"baseadr3"},$slave[$i]{"size3"}};
-   };
-   print OUTFILE "$comment---------------------------------------------------------------------------------------\n";
-@@ -1933,7 +1954,8 @@
- 
- sub gen_optional{
-     my ($sig_name,$n_o,$n_i)=@_;
--    my $i,$j;
-+    my $i; 
-+    my $j;
- 
-     return if ($n_o == 0) && ($n_i == 0);
-     print OUTFILE "      -- $sig_name Slave -> Master [Optional]\n";

wb_builder.spec

@@ -1,90 +0,0 @@
-Name:           wb_builder
-Version:        1.0.3
-Release:        4%{?dist}
-Summary:        Wishbone Bus Builder
-
-Group:          Applications/Engineering
-License:        GPLv2
-URL:            http://sourceforge.net/projects/fpgalibre/
-Source0:        http://download.sourceforge.net/sourceforge/fpgalibre/%{name}-%{version}.tar.gz
-BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-
-# fixes some Perl strict warnings and errors
-Patch0:         wb_builder-strict-warnings.patch
-Patch1:         wb_builder-args.patch
-
-BuildArch:      noarch
-
-%description
-This package includes a HDL generator from a text description or via
-GUI input for the Wishbone Bus.
-
-The Wishbone Bus is an open source hardware computer bus intended
-to let the parts of an integrated circuit communicate with each other.
-The aim is to allow the connection of differing cores to each other
-inside of a chip. The Wishbone Bus is used by many designs in the
-OpenCores project.
-
-%prep
-%setup -q
-
-%patch0 -p0 -b .perl-warnings
-%patch1 -p0 -b .perl-args
-
-# ---- Filtering Requires: ----
-# In the perl script, "use IEEE.std_logic_1164.all" is meant
-# to generate VHDL code and not for Perl
-
-cat << \EOF > %{name}-req
-#!/bin/sh
-%{__perl_requires} $* |\
-sed -e '/perl(IEEE.std_logic_1164.all)/d'
-EOF
-
-%global __perl_requires %{_builddir}/%{name}-%{version}/%{name}-req
-chmod +x %{__perl_requires}
-# ------------------------------------------
-
-
-#fixing rpmlint warnings: file-not-utf8
-for f in LEEME.txt README.txt ;
-do
-    iconv -f iso8859-1 -t utf-8 $f > $f.conv 
-    mv -f $f.conv $f
-done
-
-
-%build
-
-
-%install
-%{__rm} -rf %{buildroot}
-
-install -d %{buildroot}%{_bindir}
-install -pm 0755 wishbone.pl %{buildroot}%{_bindir}/wishbonebuilder
-
-
-
-%clean
-%{__rm} -rf %{buildroot}
-
-
-%files
-%defattr(-,root,root,-)
-%doc LEEME.txt LICENSE README.txt users_manual.pdf
-%{_bindir}/wishbonebuilder
-
-
-%changelog
-* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.3-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
-
-* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.3-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
-
-* Sun Aug 30 2009 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 1.0.3-2
-- Added patch from Shakthi Kannan
-- Patched broken arguments
-
-* Sat Apr 25 2009 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 1.0.3-1
-- Initial Package