Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild

Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>

.gitignore

@@ -0,0 +1,3 @@
+/wsjtx-*.tgz
+/wsjtx-3.0.0.tar.gz
+/wsjtx-3.0.1.tar.gz

README.md

@@ -1,3 +0,0 @@
-# wsjtx
-
-The wsjtx package

edu.princeton.physics.WSJTX.metainfo.xml

@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<component type="desktop-application">
+  <id>edu.princeton.physics.WSJTX</id>
+  <launchable type="desktop-id">wsjtx.desktop</launchable>
+  <name>wsjtx</name>
+  <summary>Amateur Radio Weak Signal Operating</summary>
+  <developer_name>Joe Taylor and others</developer_name>
+  <description>
+  <p>
+WSJT-X Version 2.1 offers ten different protocols or modes: FT4, FT8,
+JT4, JT9, JT65, QRA64, ISCAT, MSK144, WSPR, and Echo. The first six
+are designed for making reliable QSOs under weak-signal
+conditions. They use nearly identical message structure and source
+encoding. JT65 and QRA64 were designed for EME (“moonbounce”) on the
+VHF/UHF bands and have also proven very effective for worldwide QRP
+communication on the HF bands. QRA64 has a number of advantages over
+JT65, including better performance on the very weakest signals. We
+imagine that over time it may replace JT65 for EME use. JT9 was
+originally designed for the LF, MF, and lower HF bands. Its submode
+JT9A is 2 dB more sensitive than JT65 while using less than 10% of the
+bandwidth. JT4 offers a wide variety of tone spacings and has proven
+highly effective for EME on microwave bands up to 24 GHz. These four
+“slow” modes use one-minute timed sequences of alternating
+transmission and reception, so a minimal QSO takes four to six minutes
+— two or three transmissions by each station, one sending in odd UTC
+minutes and the other even. FT8 is operationally similar but four
+times faster (15-second T/R sequences) and less sensitive by a few
+dB. FT4 is faster still (7.5 s T/R sequences) and especially well
+suited for radio contesting. On the HF bands, world-wide QSOs are
+possible with any of these modes using power levels of a few watts (or
+even milliwatts) and compromise antennas. QSOs are possible at signal
+levels 10 to 15 dB below those required for CW.
+  </p>
+  <p>
+Note that even though their T/R sequences are short, FT4 and FT8 are
+classified as slow modes because their message frames are sent only
+once per transmission. All fast modes in WSJT-X send their message
+frames repeatedly, as many times as will fit into the Tx sequence
+length.
+  </p>
+  <p>
+ISCAT, MSK144, and optionally submodes JT9E-H are “fast” protocols
+designed to take advantage of brief signal enhancements from ionized
+meteor trails, aircraft scatter, and other types of scatter
+propagation. These modes use timed sequences of 5, 10, 15, or 30 s
+duration. User messages are transmitted repeatedly at high rate (up to
+250 characters per second, for MSK144) to make good use of the
+shortest meteor-trail reflections or “pings”. ISCAT uses free-form
+messages up to 28 characters long, while MSK144 uses the same
+structured messages as the slow modes and optionally an abbreviated
+format with hashed callsigns.
+  </p>
+  <p>
+WSPR (pronounced “whisper”) stands for Weak Signal Propagation
+Reporter. The WSPR protocol was designed for probing potential
+propagation paths using low-power transmissions. WSPR messages
+normally carry the transmitting station’s callsign, grid locator, and
+transmitter power in dBm, and they can be decoded at signal-to-noise
+ratios as low as -31 dB in a 2500 Hz bandwidth. WSPR users with
+internet access can automatically upload reception reports to a
+central database called WSPRnet that provides a mapping facility,
+archival storage, and many other features.
+  </p>
+  <p>
+Echo mode allows you to detect and measure your own station’s echoes
+from the moon, even if they are far below the audible threshold.
+  </p>
+  <p>
+WSJT-X provides spectral displays for receiver passbands as wide as 5
+kHz, flexible rig control for nearly all modern radios used by
+amateurs, and a wide variety of special aids such as automatic Doppler
+tracking for EME QSOs and Echo testing. The program runs equally well
+on Windows, Macintosh, and Linux systems, and installation packages
+are available for all three platforms.
+  </p>
+</description>
+  <metadata_license>CC0-1.0</metadata_license>
+  <project_license>GPL-3.0+</project_license>
+  <url type="bugtracker">https://sourceforge.net/projects/wsjt/lists/wsjt-devel</url>
+  <url type="homepage">https://wsjt.sourceforge.io/wsjtx.html</url>
+  <screenshots>
+    <screenshot type="default">
+      <caption>Main WSJT-X window</caption>
+      <image>https://sourceforge.net/p/wsjt/wsjtx/ci/master/tree/doc/user_guide/en/images/main-ui.png?format=raw</image>
+    </screenshot>
+  </screenshots>
+  <content_rating type="oars-1.1" />
+  <update_contact>hobbes1069@fedoraproject.org</update_contact>
+</component>

sources

@@ -0,0 +1 @@
+SHA512 (wsjtx-3.0.1.tar.gz) = b1ba505f31e35908eba9f73be2995e20ba17b81b1ca16cbe13bed3f6f458bb7e8bd7f176fef83097edef3ea0823a73560cf421a8ea4b9d9e8cd8b0d31e6dd8a9

wsjtx-3.0.0-path-fix.patch

@@ -0,0 +1,124 @@
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index cb951fd..d27c7c7 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -1832,7 +1832,7 @@ install (FILES
+ 
+ install (FILES
+   ALLCALL7.TXT
+-  DESTINATION ${CMAKE_INSTALL_BINDIR}
++  DESTINATION ${CMAKE_INSTALL_DATADIR}/${CMAKE_PROJECT_NAME}
+   #COMPONENT runtime
+   )
+ 
+@@ -1845,7 +1845,7 @@ install (DIRECTORY
+ 
+ install (DIRECTORY
+   ${PROJECT_SOURCE_DIR}/sounds
+-  DESTINATION ${CMAKE_INSTALL_BINDIR}
++  DESTINATION ${CMAKE_INSTALL_DATADIR}/${CMAKE_PROJECT_NAME}
+   #COMPONENT runtime
+   )
+ 
+diff --git a/Configuration.cpp b/Configuration.cpp
+index f56139c..e896653 100644
+--- a/Configuration.cpp
++++ b/Configuration.cpp
+@@ -4979,7 +4979,7 @@ void Configuration::impl::on_voices_combo_box_currentIndexChanged (int /* index
+ 
+ void Configuration::impl::read_voices ()
+ {
+-  QString audioPath = QCoreApplication::applicationDirPath() + "/sounds/";
++  QString audioPath = "/usr/share/wsjtx/sounds/";
+   QString voiceList = audioPath + "voices.dat";  // load the content of voices.dat file to the voices combo box
+   QFile file2 {voiceList};
+   QStringList wordList;
+@@ -5023,7 +5023,7 @@ void Configuration::impl::on_pb_test_alerts_clicked (bool)
+   effect->open(QIODevice::ReadOnly);
+   audio->start(effect);
+ #else
+-  QString audioPath = QCoreApplication::applicationDirPath() + "/sounds" + voicesPath_ + "/";
++  QString audioPath = "/usr/share/wsjtx/sounds" + voicesPath_ + "/";
+   QSound::play(audioPath + "Testing123.wav");  // for Linux and macOS
+ #endif
+ }
+diff --git a/lib/ft8var/cwfilter.f90 b/lib/ft8var/cwfilter.f90
+index 913c7e3..087bc70 100644
+--- a/lib/ft8var/cwfilter.f90
++++ b/lib/ft8var/cwfilter.f90
+@@ -17,7 +17,7 @@ subroutine cwfilter(first)
+ !note that with new, larger ALLCALL7.TXT files, dimensions of various ncall arrays may need to be increased in jt65_mod9.f90
+ !on 20250709 callj dim was increased from 9000 to 10000 when updated ALLCALL7.TXT file was added
+   if(first) then
+-    open(24,file='ALLCALL7.TXT',status='unknown') ! accepting Australian 7-char callsigns
++    open(24,file='/usr/share/wsjtx/ALLCALL7.TXT',status='unknown') ! accepting Australian 7-char callsigns
+     do i=1,MAXC
+       read(24,1004,end=20) line
+ 1004  format(a80)
+diff --git a/widgets/displaytext.cpp b/widgets/displaytext.cpp
+index 1e2f642..421e032 100644
+--- a/widgets/displaytext.cpp
++++ b/widgets/displaytext.cpp
+@@ -931,7 +931,7 @@ void DisplayText::AudioAlerts()
+         connect(audio, SIGNAL(stateChanged(QAudio::State)), this, SLOT(handleStateChanged(QAudio::State)));
+ #else
+   if(m_config->alert_Enabled()) {
+-        QString audioPath = QCoreApplication::applicationDirPath() + "/sounds" + m_config->voicesPath() + "/";
++        QString audioPath = "/usr/share/wsjtx/sounds" + m_config->voicesPath() + "/";
+ #endif
+         QFile *effect2 = new QFile(this);
+         QFile *effect3 = new QFile(this);
+diff --git a/widgets/mainwindow.cpp b/widgets/mainwindow.cpp
+index b2c399e..0cb4b55 100644
+--- a/widgets/mainwindow.cpp
++++ b/widgets/mainwindow.cpp
+@@ -3381,7 +3381,7 @@ void MainWindow::fastSink(qint64 frames)
+         effect1->open(QIODevice::ReadOnly);
+         audio->start(effect1);
+ #else
+-        QString audioPath = QCoreApplication::applicationDirPath() + "/sounds" + m_config.voicesPath() + "/";
++        QString audioPath = "/usr/share/wsjtx/sounds" + m_config.voicesPath() + "/";
+         if (m_config.alert_DXcall() && play_DXcall) QSound::play(audioPath + "DXcall.wav");  // for Linux and macOS
+         else if (m_config.alert_DXcall() && play_Wanted) QSound::play(audioPath + "Wanted.wav");  // for Linux and macOS
+ #endif
+@@ -7208,7 +7208,7 @@ void MainWindow::readFromStdout()                             //readFromStdout
+             effect1->open(QIODevice::ReadOnly);
+             audio->start(effect1);
+ #else
+-            QString audioPath = QCoreApplication::applicationDirPath() + "/sounds" + m_config.voicesPath() + "/";
++            QString audioPath = "/usr/share/wsjtx/sounds" + m_config.voicesPath() + "/";
+             if (m_config.alert_DXcall() && play_DXcall) QSound::play(audioPath + "DXcall.wav");  // for Linux and macOS
+             else if (m_config.alert_DXcall() && play_Wanted) QSound::play(audioPath + "Wanted.wav");  // for Linux and macOS
+ #endif
+@@ -10404,7 +10404,7 @@ void MainWindow::mousePressEvent(QMouseEvent *event)    // mouse press events
+       effect->open(QIODevice::ReadOnly);
+       audio->start(effect);
+ #else
+-      QString audioPath = QCoreApplication::applicationDirPath() + "/sounds" + m_config.voicesPath() + "/";
++      QString audioPath = "/usr/share/wsjtx/sounds" + m_config.voicesPath() + "/";
+       QSound::play(audioPath + "Testing_long.wav");  // for Linux and macOS
+ #endif
+     }
+@@ -17332,7 +17332,7 @@ void MainWindow::on_actionErase_Ignore_List_triggered()
+ 
+ void MainWindow::read_ALLCALL7()
+ {
+-  static QFile AllCall7File {"ALLCALL7.TXT"};
++  static QFile AllCall7File {"/usr/share/wsjtx/ALLCALL7.TXT"};
+   QTextStream AllCall7Stream(&AllCall7File);
+   if(AllCall7File.open(QIODevice::ReadOnly | QIODevice::Text)) {
+     while (!AllCall7Stream.atEnd()) {
+@@ -17379,11 +17379,11 @@ void MainWindow::alertQSYmessage ()
+   audio = new QAudioOutput(format, this);
+   connect(audio, SIGNAL(stateChanged(QAudio::State)), this, SLOT(handleStateChanged(QAudio::State)));
+   QFile *effect1 = new QFile(this);
+-  effect1->setFileName(QString("%1/%2").arg(binPath, "/sounds/Message.wav"));
++  effect1->setFileName(QString("%1/%2").arg("/usr/share/wsjtx", "/sounds/Message.wav"));
+   effect1->open(QIODevice::ReadOnly);
+   audio->start(effect1);
+ #else
+   QString binPath = QCoreApplication::applicationDirPath();
+-  QSound::play(binPath + "/sounds/Message.wav");  // for Linux and macOS
++  QSound::play("/usr/share/wsjtx/sounds/Message.wav");  // for Linux and macOS
+ #endif
+ }

wsjtx.spec

@@ -0,0 +1,397 @@
+# for fortran nested functions that (still in 2026) in gfortran implementation uses
+# trampolines that require executable stack
+%undefine _hardened_linker_errors
+
+Name:		wsjtx
+Version:	3.0.1
+Release:	2%{?dist}
+Summary:	Weak Signal communication by K1JT
+
+License:	GPL-3.0-or-later
+
+URL:            https://github.com/WSJTX/wsjtx
+Source0:        %{url}/archive/v%{version}/%{name}-%{version}.tar.gz
+Source100:	edu.princeton.physics.WSJTX.metainfo.xml
+
+ExcludeArch:    i686
+
+BuildRequires:	cmake
+BuildRequires:	gcc-c++
+BuildRequires:	gcc-gfortran
+
+BuildRequires:	qt5-qtbase-devel
+BuildRequires:	qt5-linguist
+BuildRequires:	qt5-qtserialport-devel
+BuildRequires:	qt5-qtmultimedia-devel
+BuildRequires:	qt5-qtwebsockets-devel
+BuildRequires:	desktop-file-utils
+BuildRequires:	hamlib-devel
+BuildRequires:	fftw-devel
+BuildRequires:	libusbx-devel
+BuildRequires:	systemd-devel
+%if 0%{?rhel} && 0%{?rhel} < 9
+BuildRequires:	boost169-devel
+%else
+BuildRequires:	boost-devel
+%endif
+BuildRequires:	portaudio-devel
+%if 0%{?fedora}
+BuildRequires:	asciidoc
+BuildRequires:	rubygem-asciidoctor
+BuildRequires:	libappstream-glib
+%endif
+# Temporal fix, problem reported upstream
+# https://github.com/WSJTX/wsjtx/issues/5
+# https://www.mail-archive.com/wsjt-devel@lists.sourceforge.net/msg28480.html
+Patch:		wsjtx-3.0.0-path-fix.patch
+
+
+%description
+WSJT-X is a computer program designed to facilitate basic amateur radio
+communication using very weak signals. It implements communication protocols
+or "modes" called JT4, JT9, JT65, QRA64, ISCAT, MSK144, and WSPR, as well as
+one called Echo for detecting and measuring your own radio signals reflected
+from the Moon.
+
+
+%prep
+%autosetup -p1
+
+
+%build
+# The fortran code in this package is not type safe and will thus not work
+# with LTO.  Additionally there are numerous bogus strncat calls that also
+# need to be fixed for this package to work with LTO
+%define _lto_cflags %{nil}
+
+# -fcommon is a workaround for build with gcc-10, reported upstream
+export CFLAGS="%{build_cflags} -fcommon -Wno-error=maybe-uninitialized"
+# reported upstream
+export CXXFLAGS="%{build_cxxflags} -Wno-error=maybe-uninitialized"
+export LDFLAGS="%{build_ldflags}"
+# workaround for hamlib check, i.e. for hamlib_LIBRARY_DIRS not to be empty
+export PKG_CONFIG_ALLOW_SYSTEM_LIBS=1
+
+%cmake -Dhamlib_STATIC=FALSE \
+       -DBoost_NO_SYSTEM_PATHS=FALSE \
+%if 0%{?rhel}
+       -DBOOST_INCLUDEDIR=%{_includedir}/boost169 \
+       -DBOOST_LIBRARYDIR=%{_libdir}/boost169 \
+       -DWSJT_GENERATE_DOCS=FALSE \
+       -DWSJT_SKIP_MANPAGES=TRUE
+%endif
+
+%cmake_build
+
+
+%install
+%cmake_install
+
+# Make sure the right style is used.
+desktop-file-edit --set-key=Exec --set-value="wsjtx --style=fusion" \
+    %{buildroot}/%{_datadir}/applications/%{name}.desktop
+# desktop files
+desktop-file-validate %{buildroot}%{_datadir}/applications/wsjtx.desktop
+desktop-file-validate %{buildroot}%{_datadir}/applications/message_aggregator.desktop
+
+%if 0%{?fedora}
+# metainfo file
+mkdir -p %{buildroot}%{_metainfodir}
+install -pm 0644 %{SOURCE100} %{buildroot}%{_metainfodir}/
+%endif
+
+# fix docs
+install -p -m 0644 -t %{buildroot}%{_datadir}/doc/%{name} GUIcontrols.txt jt9.txt \
+  v1.7_Features.txt wsjtx_changelog.txt NEWS README THANKS
+
+# drop copies of the hamlib bins
+# https://github.com/WSJTX/wsjtx/issues/6
+rm -f %{buildroot}%{_bindir}/rigctl*-wsjtx
+
+%if 0%{?fedora}
+%check
+appstream-util validate-relax --nonet %{buildroot}%{_metainfodir}/*.metainfo.xml
+%endif
+
+
+%files
+%license COPYING
+%doc %{_datadir}/doc/%{name}
+%{_bindir}/cablog
+%{_bindir}/echosim
+%{_bindir}/fcal
+%{_bindir}/fmeasure
+%{_bindir}/fmtave
+%{_bindir}/fst4sim
+%{_bindir}/hash22calc
+%{_bindir}/jt4code
+%{_bindir}/jt65code
+%{_bindir}/jt9
+%{_bindir}/jt9code
+%{_bindir}/ft8code
+%{_bindir}/message_aggregator
+%{_bindir}/msk144code
+%{_bindir}/qmap
+%{_bindir}/q65sim
+%{_bindir}/q65code
+%{_bindir}/udp_daemon
+%{_bindir}/wsjtx
+%{_bindir}/wsjtx_app_version
+%{_bindir}/wsprd
+%{_bindir}/EchoCallSim
+%{_bindir}/ft8sim
+%{_bindir}/testEchoCall
+%{?fedora:%{_mandir}/man1/*.1.gz}
+%{?fedora:%{_metainfodir}/*.xml}
+%{_datadir}/applications/wsjtx.desktop
+%{_datadir}/applications/message_aggregator.desktop
+%{_datadir}/pixmaps/wsjtx_icon.png
+%{_datadir}/%{name}
+
+
+%changelog
+* Fri Jul 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild
+
+* Mon May 04 2026 Jaroslav Škarvada <jskarvad@redhat.com> - 3.0.1-1
+- New version
+  Resolves: rhbz#2464806
+
+* Tue Apr 14 2026 Jaroslav Škarvada <jskarvad@redhat.com> - 3.0.0-1
+- New version
+
+* Sat Jan 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.0~rc1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+
+* Thu Jan 15 2026 Jaroslav Škarvada <jskarvad@redhat.com> - 3.0.0~rc1-2
+- Rebuilt for boost
+  Resolves: rhbz#2429735
+
+* Mon Jan 05 2026 Jaroslav Škarvada  <jskarvad@redhat.com> - 3.0.0~rc1-1
+- New version
+
+* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.0-14
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Mon Mar 31 2025 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-13
+- Update to 2.8.0 final release.
+
+* Thu Feb 06 2025 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-12
+- Rebuild for hamlib 4.6.
+
+* Sun Jan 19 2025 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.0-11
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Tue Jan 07 2025 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-10
+- Update to 2.7.0 RC8.
+
+* Tue Dec 31 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-9
+- Rebuild for Hamlib 4.6.
+
+* Tue Oct 01 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-8
+- Update to 2.7.0 RC7.
+
+* Sat Sep 14 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-7
+- Remove superfox binaries and patch build system.
+
+* Thu Aug  1 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-6
+- Update to 2.7.0 RC6.
+
+* Thu Jul 25 2024 Miroslav Suchý <msuchy@redhat.com> - 2.7.0-5
+- convert license to SPDX
+
+* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.0-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Mon Jul 01 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-5
+- Update to 2.7.0 RC5.
+
+* Mon Jan 22 2024 Richard Shaw <hobbes1069@gmail.com> - 2.7.0-3
+- Update to 2.7.0 RC3.
+
+* Thu Jan 18 2024 Jonathan Wakely <jwakely@redhat.com> - 2.7.0-2
+- Rebuilt for Boost 1.83
+
+* Mon Feb 20 2023 Jonathan Wakely <jwakely@redhat.com> - 2.6.1-2
+- Rebuilt for Boost 1.81
+
+* Thu Jan 19 2023 Richard Shaw <hobbes1069@gmail.com> - 2.6.1-1
+- Update to 2.6.0.
+
+* Mon Nov 07 2022 Richard Shaw <hobbes1069@gmail.com> - 2.5.4-5
+- Rebuild for updated hamlib 4.5.
+
+* Sat Jul 23 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.4-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Wed May 04 2022 Thomas Rodgers <trodgers@redhat.com> - 2.5.4-3
+- Rebuilt for Boost 1.78
+
+* Sat Jan 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.5.4-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Mon Jan 03 2022 Richard Shaw <hobbes1069@gmail.com> - 2.5.4-1
+- Update to 2.5.4.
+
+* Thu Dec 23 2021 Richard Shaw <hobbes1069@gmail.com> - 2.5.3-2
+- Rebuild for hamlib 4.4.
+
+* Thu Dec 23 2021 Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.3-1
+- New version
+  Resolves: rhbz#2034707
+
+* Thu Dec 23 2021 Richard Shaw <hobbes1069@gmail.com> - 2.5.2-2
+- 36-build-side-49086
+
+* Mon Nov 29 2021 Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.2-1
+- New version
+  Resolves: rhbz#2020399
+
+* Mon Oct 25 2021 Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.1-1
+- New version
+  Resolves: rhbz#2016506
+
+* Wed Oct 13 2021 Jaroslav Škarvada <jskarvad@redhat.com> - 2.5.0-1
+- New version
+  Resolves: rhbz#2008230
+
+* Tue Oct 12 2021 Richard Shaw <hobbes1069@gmail.com> - 2.4.0-5
+- Rebuild for hamlib 4.3.1.
+
+* Sat Aug 07 2021 Jonathan Wakely <jwakely@redhat.com> - 2.4.0-4
+- Rebuilt for Boost 1.76
+
+* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.0-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Sun May 30 2021 Richard Shaw <hobbes1069@gmail.com> - 2.4.0-2
+- Rebuild for hamlib 4.2.
+
+* Mon May 24 2021 Richard Shaw <hobbes1069@gmail.com> - 2.4.0-1
+- Update to 2.4.0.
+
+* Tue Mar 30 2021 Jonathan Wakely <jwakely@redhat.com> - 2.3.1-2
+- Rebuilt for removed libstdc++ symbol (#1937698)
+
+* Fri Mar 26 2021 Richard Shaw <hobbes1069@gmail.com> - 2.3.1-1
+- Update to 2.3.1.
+
+* Wed Feb 03 2021 Richard Shaw <hobbes1069@gmail.com> - 2.3.0-1
+- Update to 2.3.0 final.
+
+* Tue Feb 02 2021 Richard Shaw <hobbes1069@gmail.com> - 2.2.2-8
+- Rebuild for hamlib 4.1.
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.2-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Fri Jan 01 2021 Richard Shaw <hobbes1069@gmail.com> - 2.2.2-6
+- Rebuilt for hamlib 4.0 release.
+
+* Wed Aug  5 2020 Jaroslav Škarvada <jskarvad@redhat.com> - 2.2.2-5
+- Fixed FTBFS
+  Resolves: rhbz#1865629
+
+* Sat Aug 01 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.2-4
+- Second attempt - Rebuilt for
+  https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Tue Jun 30 2020 Jeff Law <law@redhat.com> - 2.2.2-2
+- Disable LTO
+
+* Mon Jun 22 2020 Richard Shaw <hobbes1069@gmail.com> - 2.2.2-1
+- Update to 2.2.2.
+
+* Sat Jun 06 2020 Richard Shaw <hobbes1069@gmail.com> - 2.2.1-1
+- Update to 2.2.1.
+
+* Tue Jun 02 2020 Richard Shaw <hobbes1069@gmail.com> - 2.2.0-1
+- Update to 2.2.0.
+
+* Tue Mar 31 2020 Richard Shaw <hobbes1069@gmail.com> - 2.1.2-4
+- Rebuilt with hamlib 4.0.
+
+* Mon Feb 10 2020 Jaroslav Škarvada <jskarvad@redhat.com> - 2.1.2-3
+- Fixed FTBFS with gcc-10
+  Resolves: rhbz#1800262
+
+* Fri Jan 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.1.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Tue Nov 26 2019 Richard Shaw <hobbes1069@gmail.com> - 2.1.2-1
+- Update to 2.1.2.
+
+* Tue Nov 26 2019 Richard Shaw <hobbes1069@gmail.com> - 2.1.1-1
+- Upate to 2.2.1.
+
+* Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.1.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Mon Jul 15 2019 Richard Shaw <hobbes1069@gmail.com> - 2.1.0-1
+- Update to 2.1.0.
+
+* Mon Feb 25 2019 Richard Shaw <hobbes1069@gmail.com> - 2.0.1-1
+- Update to 2.0.1.
+
+* Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.0-8.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Mon Dec 10 2018 Richard Shaw <hobbes1069@gmail.com> - 2.0.0-8
+- Update to 2.0.0 GA.
+
+* Fri Sep 28 2018 Richard Shaw <hobbes1069@gmail.com> - 1.9.1-2
+- Rebuild for hamlib 3.3.
+
+* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.9.1-1.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Thu May 31 2018 Richard Shaw <hobbes1069@gmail.com> - 1.9.1-1
+- Update to 1.9.1.
+- Update compile patch to deal with qt5_use_modules no longer being available in
+  rawhide/f29.
+
+* Tue May 29 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.9.0-1
+- New version
+- Dropped gcc-8.0.1-compile-fix patch (not needed)
+
+* Wed May  2 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.9.0-0.3.rc4
+- New version
+- De-fuzzified patches
+
+* Wed Mar 21 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.9.0-0.2.rc3
+- New version
+- Updated gcc-8.0.1-compile-fix patch
+
+* Fri Mar 16 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.9.0-0.1.rc2
+- New version
+- Fixed compilation with gcc-8.0.1
+  Resolves: rhbz#1556544
+- De-fuzzified compile-fix patch
+
+* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.0-3.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Wed Jan 31 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-3
+- Rebuilt for new fortran
+
+* Fri Jan 19 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-2
+- Do not force non-executable stack
+  Resolves: rhbz#1535987
+  Resolves: rhbz#1523446
+
+* Mon Jan 15 2018 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-1
+- New version
+  Resolves: rhbz#1534099
+- De-fuzzified compile-fix patch
+
+* Fri Sep  8 2017 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-0.3.rc2
+- Dropped rigctl*-wsjtx (hamlib copy)
+
+* Sun Sep  3 2017 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-0.2.rc2
+- New version
+
+* Fri Sep  1 2017 Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-0.1.rc1
+- Initial version