Bump release for rebuild

Update to 0.10.6.1
CVE-2026-41252, CVE-2026-41521, CVE-2026-44178, CVE-2026-42218
CVE-2026-44978, CVE-2026-54538, CVE-2026-55238, CVE-2026-55626
CVE-2026-55639, CVE-2026-55645

.gitignore

@@ -29,3 +29,14 @@ xrdp-cvs-03-17-2010.tar.gz
 /xrdp-0.9.22.1.tar.gz
 /xrdp-0.9.23.tar.gz
 /xrdp-0.9.23.1.tar.gz
+/xrdp-0.9.24.tar.gz
+/xrdp-0.9.25.tar.gz
+/xrdp-0.10.0.tar.gz
+/xrdp-0.10.1.tar.gz
+/xrdp-0.10.2-rc.1.tar.gz
+/xrdp-0.10.2.tar.gz
+/xrdp-0.10.3.tar.gz
+/xrdp-0.10.4.tar.gz
+/xrdp-0.10.5.tar.gz
+/xrdp-0.10.6.tar.gz
+/xrdp-0.10.6.1.tar.gz

README.Fedora

@@ -1,72 +0,0 @@
-Restarts
-========
-
-Service restarts after RPM package upgrades have been disabled on purpose.
-This is to avoid a situation where an update is performed from within a
-session running on xrdp, which can then cause dnf to only perform part of the
-transaction and leave the system in a state that requires further manual
-intervention, including removal of duplicate packages etc.
-
-So, it will be up to the user/admin to restart xrdp service after any RPM
-package upgrade. This is in line with what other GUI systems like Xorg and
-Wayland do.
-
-xorgxrdp
-========
-
-Note that xorgxrdp is not installed and configured by default. Each build
-depends on specific binary version of Xorg, which tends to create very strict
-installation dependencies that can be an inconvenience in EPEL.
-
-SELinux
-=======
-
-Please note that you may need to install xrdp-selinux package in order to get
-the required SELinux policy that will allow xrdp and associated processes to
-run successfully if SELinux is enabled. On versions of Fedora and RHEL that
-support weak dependencies, xrdp-selinux will be a recommended package.
-
-WARNING: The policy module contains a rule that permits unconfined_service_t
-processes to transition into unconfined_t. If xrdp is not the only service
-that runs as unconfined_service_t on your system, this policy will allow any
-other such service to transition as well.
-
-Default configuration in /etc/pam.d/xrdp-sesman uses password-auth for auth,
-account, password and session. This may result in an incorrect context for
-the processes in the session. Please adjust this file to match your desktop
-environment. An example for Gnome desktop is given in the file.
-
-TigerVNC >= 1.8.0
-=================
-
-TigerVNC 1.8.0 enables clipboard support by default (i.e. no need to run
-vncconfig), which may cause disconnections in xrdp. To avoid the issue, these
-can be added to [Xvnc] stanza in /etc/xrdp/sesman.ini:
-
-param=-AcceptCutText=0
-param=-SendCutText=0
-param=-SendPrimary=0
-param=-SetPrimary=0
-
-Of course, cut and paste support will not work with these set.
-
-Runlevel
-========
-
-If the system is configured to boot into graphical target, you may experience
-problems with xrdp Gnome sessions. In order to avoid this, put the system into
-multi user target. Like this:
-
-systemctl set-default multi-user.target
-
-Then reboot.
-
-VSOCK
-========
-An example of a how to set up xrdp with VSOCK can be found here:
-
-https://bugzilla.redhat.com/show_bug.cgi?id=1787953#c22
-
-Please note that polkit rules for active sessions, allowing access to colord
-and repository updates are already shipped, but in a current, JavaScript
-format.

README.md

@@ -0,0 +1,114 @@
+Downgrade from 0.10.x to 0.9.x
+==
+Version 0.10.x requires different permissions of `/run/xrdp` directory than
+version 0.9.x. When 0.10.x is fully uninstalled, this directory is removed
+and subsequent installation of 0.9.x should work fine.
+
+However, if 0.10.x is downgraded to 0.9.x, the directory is preserved,
+because we could have xrdp and its sessions still running, so subsequent start
+or restart will fail, unless the permissions of `/run/xrdp` directory are
+changed to 1777 beforehand.
+
+Unprivileged xrdp user in 0.10.2 and up
+==
+Recent builds of xrdp (0.10.2 and above) create local unprivileged xrdp user,
+which is used to run xrdp daemon. Script `/usr/share/xrdp/xrdp-chkpriv` checks
+whether `/etc/xrdp/key.pem`, `/etc/xrdp/cert.pem` and `/etc/xrdp/rsakeys.ini`
+files have correct ownership and permissions. It also makes sure
+`/etc/xrdp/xrdp.ini` and `/etc/xrdp/sesman.ini` agree on which group is used
+for unprivileged user.
+
+If you are upgrading from previous version of xrdp and you already have all
+these files, you may need to adjust them by hand after running this script.
+For clean installs, these files should be created with correct ownership and
+permissions.
+
+Restarts
+==
+Service restarts after RPM package upgrades have been disabled on purpose.
+This is to avoid a situation where an update is performed from within a
+session running on xrdp, which can then cause dnf to only perform part of the
+transaction and leave the system in a state that requires further manual
+intervention, including removal of duplicate packages etc.
+
+So, it will be up to the user/admin to restart xrdp service after any RPM
+package upgrade. This is in line with what other GUI systems like Xorg and
+Wayland do.
+
+xorgxrdp
+==
+Note that xorgxrdp is not installed and configured by default. Each build
+depends on specific binary version of Xorg. If you wish to use it, install
+it by hand or its glamor build.
+
+SELinux
+==
+You may need to install xrdp-selinux package in order to get the required
+SELinux policy that will allow xrdp and associated processes to run
+successfully if SELinux is enabled. On versions of Fedora and RHEL that support
+weak dependencies, xrdp-selinux will be a recommended package.
+
+**WARNING**: The policy module contains a rule that permits
+unconfined_service_t processes to transition into unconfined_t. If xrdp is not
+the only service that runs as unconfined_service_t on your system, this policy
+will allow any other such service to transition as well. This transition is
+exercised on every xrdp session (see below), not just latent in the policy.
+
+The default `/etc/pam.d/xrdp-sesman` configuration invokes `pam_selinux.so`,
+`pam_loginuid.so`, `pam_namespace.so` and `pam_keyinit.so` around the shared
+`password-auth` stack, so session processes get the correct `unconfined_t`
+context instead of remaining `unconfined_service_t` (rhbz#2499948).
+
+If you are running a GNOME session over xrdp, comment out the generic block
+in `/etc/pam.d/xrdp-sesman` and uncomment the Gnome-specific block instead.
+This routes auth/session handling through `gdm-password`, which already
+carries the correct SELinux/session ordering and additionally unlocks GNOME
+Keyring automatically at login, so you won't be prompted to unlock it a
+second time inside the session.
+
+TigerVNC >= 1.8.0
+==
+TigerVNC 1.8.0 enables clipboard support by default (i.e. no need to run
+vncconfig), which may cause disconnections in xrdp. To avoid the issue, these
+can be added to [Xvnc] stanza in `/etc/xrdp/sesman.ini`:
+```
+param=-AcceptCutText=0
+param=-SendCutText=0
+param=-SendPrimary=0
+param=-SetPrimary=0
+```
+
+Of course, cut and paste support will not work with these set.
+
+Runlevel
+==
+If the system is configured to boot into graphical target, you may experience
+problems with xrdp Gnome sessions. In order to avoid this, put the system into
+multi user target. Like this:
+```
+systemctl set-default multi-user.target
+```
+Then reboot.
+
+GNOME on X11 is no longer part of Fedora, so GNOME is no longer a supported
+desktop for xrdp sessions on Fedora. If you need RDP access to a GNOME
+desktop, use GNOME's built-in headless GNOME Remote Desktop instead of xrdp -
+it speaks RDP natively, is Wayland-based, and doesn't need any of the
+X11/PAM workarounds this document describes. xrdp remains the right choice
+for XFCE, KDE Plasma, and other X11-based desktops on Fedora.
+
+VSOCK
+==
+An example of a how to set up xrdp with VSOCK can be found here:
+
+https://bugzilla.redhat.com/show_bug.cgi?id=1787953#c22
+
+Polkit rules for active sessions, allowing access to colord and repository
+updates are already shipped, but in a current, JavaScript format.
+
+KDE Plasma
+==
+If you are using plasma-workspace package with xrdp, be sure to install
+plasma-workspace-x11 to get full functionality. See this for more details:
+
+https://github.com/neutrinolabs/xrdp/issues/3395

sources

@@ -1 +1 @@
-SHA512 (xrdp-0.9.23.1.tar.gz) = 92b732b85afe49c49c103c37404c66aa24fddf1583a91ec4a691044a8f02ec1abd7c834a6e0f06469e3a3bfe9fae69d90759a7ea6904ccf468271309b1fe5577
+SHA512 (xrdp-0.10.6.1.tar.gz) = 14fc2bdc7d450b0194d48244450fee2dc40d248bf0d7d64538959827919d517bda90cda5985014e6b5adf101cbb584e83cf72e5181adcff78b3131653937e108

xrdp-0.10.0-scripts-libexec.patch

@@ -0,0 +1,38 @@
+--- xrdp-0.10.0-beta.1/sesman/libsesman/sesman_config.c.o	2024-03-11 14:21:33.295277249 +1100
++++ xrdp-0.10.0-beta.1/sesman/libsesman/sesman_config.c	2024-03-11 14:24:16.114048106 +1100
+@@ -249,14 +249,14 @@ config_read_globals(int file, struct con
+         cf->default_wm = g_strdup("startwm.sh");
+     }
+     /* if default_wm doesn't begin with '/', it's a relative path to
+-     * XRDP_CFG_PATH */
++     * /usr/libexec/xrdp */
+     if (cf->default_wm[0] != '/')
+     {
+         /* sizeof operator returns string length including null terminator  */
+-        int length = (sizeof(XRDP_CFG_PATH) +
++        int length = (sizeof("/usr/libexec/xrdp") +
+                       g_strlen(cf->default_wm) + 1); /* '/' */
+         char *buf = (char *)g_malloc(length, 0);
+-        g_sprintf(buf, "%s/%s", XRDP_CFG_PATH, cf->default_wm);
++        g_sprintf(buf, "%s/%s", "/usr/libexec/xrdp", cf->default_wm);
+         g_free(cf->default_wm);
+         cf->default_wm = buf;
+     }
+@@ -267,14 +267,14 @@ config_read_globals(int file, struct con
+         cf->reconnect_sh = g_strdup("reconnectwm.sh");
+     }
+     /* if reconnect_sh doesn't begin with '/', it's a relative path to
+-     * XRDP_CFG_PATH */
++     * /usr/libexec/xrdp */
+     if (cf->reconnect_sh[0] != '/')
+     {
+         /* sizeof operator returns string length including null terminator  */
+-        int length = (sizeof(XRDP_CFG_PATH) +
++        int length = (sizeof("/usr/libexec/xrdp") +
+                       g_strlen(cf->reconnect_sh) + 1); /* '/' */
+         char *buf = (char *)g_malloc(length, 0);
+-        g_sprintf(buf, "%s/%s", XRDP_CFG_PATH, cf->reconnect_sh);
++        g_sprintf(buf, "%s/%s", "/usr/libexec/xrdp", cf->reconnect_sh);
+         g_free(cf->reconnect_sh);
+         cf->reconnect_sh = buf;
+     }

xrdp-0.10.1-service.patch

@@ -0,0 +1,13 @@
+diff -ruNp xrdp-0.10.1-v/instfiles/xrdp-sesman.service.in xrdp-0.10.1/instfiles/xrdp-sesman.service.in
+--- xrdp-0.10.1-v/instfiles/xrdp-sesman.service.in	2024-07-31 22:55:03.000000000 +1000
++++ xrdp-0.10.1/instfiles/xrdp-sesman.service.in	2024-07-31 23:58:48.247323165 +1000
+@@ -1,7 +1,8 @@
+ [Unit]
+ Description=xrdp session manager
+ Documentation=man:xrdp-sesman(8) man:sesman.ini(5)
+-After=network.target
++Wants=network-online.target nss-lookup.target nss-user-lookup.target
++After=network-online.target nss-lookup.target nss-user-lookup.target
+ StopWhenUnneeded=true
+ BindsTo=xrdp.service
+ 

xrdp-0.10.2-sesman.patch

@@ -0,0 +1,11 @@
+--- xrdp-0.10.2-rc.1/sesman/sesman.ini.in.org	2024-12-24 00:36:22.000000000 +1100
++++ xrdp-0.10.2-rc.1/sesman/sesman.ini.in	2024-12-24 07:06:20.309329448 +1100
+@@ -7,7 +7,7 @@ EnableUserWindowManager=true
+ ; Give in relative path to user's home directory
+ UserWindowManager=startwm.sh
+ ; Give in full path or relative path to @sesmansysconfdir@
+-DefaultWindowManager=startwm.sh
++DefaultWindowManager=startwm-bash.sh
+ ; Give in full path or relative path to @sesmansysconfdir@
+ ReconnectScript=reconnectwm.sh
+ 

xrdp-0.10.3-xrdp-ini.patch

@@ -0,0 +1,102 @@
+--- xrdp-0.10.3/xrdp/xrdp.ini.in.org	2025-04-01 21:11:30.997621951 +1100
++++ xrdp-0.10.3/xrdp/xrdp.ini.in	2025-04-01 21:13:18.881162132 +1100
+@@ -30,8 +30,8 @@ use_vsock=false
+ ; Unprivileged User name and group to run the xrdp daemon.
+ ; It is HIGHLY RECOMMENDED you set these values. See the xrdp.ini(5)
+ ; manpage for more information on setting and checking these.
+-#runtime_user=xrdp
+-#runtime_group=xrdp
++runtime_user=xrdp
++runtime_group=xrdp
+ 
+ ; regulate if the listening socket use socket option tcp_nodelay
+ ; no buffering will be performed in the TCP stack
+@@ -241,24 +241,24 @@ xrdpvr=true
+ ; Some session types such as Xorg and Xvnc start a display server.
+ ; Startup command-line parameters for the display server are configured
+ ; in sesman.ini. See and configure also sesman.ini.
+-[Xorg]
+-name=Xorg
+-lib=libxup.@lib_extension@
+-username=ask
+-password=ask
+-port=-1
+-code=20
++#[Xorg]
++#name=Xorg
++#lib=libxup.@lib_extension@
++#username=ask
++#password=ask
++#port=-1
++#code=20
+ ; Frame capture interval (milliseconds)
+-h264_frame_interval=16
+-rfx_frame_interval=32
+-normal_frame_interval=40
++#h264_frame_interval=16
++#rfx_frame_interval=32
++#normal_frame_interval=40
+ 
+ [Xvnc]
+ name=Xvnc
+ lib=libvnc.@lib_extension@
+ username=ask
+ password=ask
+-ip=127.0.0.1
++#ip=127.0.0.1
+ ; port is -1 (sesman controlled), numeric (TCP connection) or an
+ ; absolute path (UDS connection).
+ port=-1
+@@ -277,7 +277,7 @@ port=-1
+ ; VNC password files is no longer considered secure by FIPS
+ ;
+ ; The default value is 0 on non-FIPS systems, and 1 on FIPS-based systems.
+-#code=0
++code=1
+ #xserverbpp=24
+ #delay_ms=2000
+ ; Disable requested encodings to support buggy VNC servers
+@@ -287,13 +287,13 @@ port=-1
+ ; Generic VNC Proxy
+ ; Tailor this to specific hosts and VNC instances by specifying an ip
+ ; and port and setting a suitable name.
+-[vnc-any]
+-name=vnc-any
+-lib=libvnc.@lib_extension@
+-ip=ask
+-port=ask5900
+-username=na
+-password=ask
++#[vnc-any]
++#name=vnc-any
++#lib=libvnc.@lib_extension@
++#ip=ask
++#port=ask5900
++#username=na
++#password=ask
+ #pamusername=asksame
+ #pampassword=asksame
+ #delay_ms=2000
+@@ -310,15 +310,15 @@ password=ask
+ ; Generic RDP proxy using NeutrinoRDP
+ ; Tailor this to specific hosts by specifying an ip and port and setting
+ ; a suitable name.
+-[neutrinordp-any]
+-name=neutrinordp-any
++#[neutrinordp-any]
++#name=neutrinordp-any
+ ; To use this section, you should build xrdp with configure option
+ ; --enable-neutrinordp.
+-lib=libxrdpneutrinordp.@lib_extension@
+-ip=ask
+-port=ask3389
+-username=ask
+-password=ask
++#lib=libxrdpneutrinordp.@lib_extension@
++#ip=ask
++#port=ask3389
++#username=ask
++#password=ask
+ ; Uncomment the following lines to enable PAM authentication for proxy
+ ; connections.
+ #pamusername=ask

xrdp-0.10.5-sesman-ini.patch

@@ -0,0 +1,20 @@
+--- xrdp-0.10.2-rc.1/sesman/sesman.ini.in.org	2024-12-24 07:11:02.643702480 +1100
++++ xrdp-0.10.2-rc.1/sesman/sesman.ini.in	2024-12-24 07:12:42.372540720 +1100
+@@ -48,7 +48,7 @@ RestrictInboundClipboard=none
+ ; local sockets for the session are created.
+ ; This MUST be the same as runtime_group in xrdp.ini, or xrdp will not
+ ; be able to connect to your sessions.
+-#SessionSockdirGroup=xrdp
++SessionSockdirGroup=xrdp
+ 
+ 
+ [Sessions]
+@@ -143,7 +143,7 @@ EnableSyslog=true
+ ; Arch Linux                  :  param=/usr/lib/Xorg
+ ; FreeBSD (from 2022Q4)       :  param=/usr/local/libexec/Xorg
+ ;
+-param=Xorg
++param=/usr/libexec/Xorg
+ ; Leave the rest parameters as-is unless you understand what will happen.
+ param=-config
+ param=xrdp/xorg.conf

xrdp-0.9.10-scripts-libexec.patch

@@ -1,37 +0,0 @@
-diff -ruN xrdp-0.9.10-v/sesman/config.c xrdp-0.9.10/sesman/config.c
---- xrdp-0.9.10-v/sesman/config.c	2019-04-18 15:38:26.000000000 +1000
-+++ xrdp-0.9.10/sesman/config.c	2019-05-03 07:59:36.784643398 +1000
-@@ -179,13 +179,13 @@
-         g_free(cf->default_wm);
-         cf->default_wm = g_strdup("startwm.sh");
-     }
--    /* if default_wm doesn't begin with '/', it's a relative path to XRDP_CFG_PATH */
-+    /* if default_wm doesn't begin with '/', it's a relative path to /usr/libexec/xrdp */
-     if (cf->default_wm[0] != '/')
-     {
-         /* sizeof operator returns string length including null terminator  */
--        length = sizeof(XRDP_CFG_PATH) + g_strlen(cf->default_wm) + 1; /* '/' */
-+        length = sizeof("/usr/libexec/xrdp") + g_strlen(cf->default_wm) + 1; /* '/' */
-         buf = (char *)g_malloc(length, 0);
--        g_sprintf(buf, "%s/%s", XRDP_CFG_PATH, cf->default_wm);
-+        g_sprintf(buf, "%s/%s", "/usr/libexec/xrdp", cf->default_wm);
-         g_free(cf->default_wm);
-         cf->default_wm = g_strdup(buf);
-         g_free(buf);
-@@ -200,13 +200,13 @@
-         g_free(cf->reconnect_sh);
-         cf->reconnect_sh = g_strdup("reconnectwm.sh");
-     }
--    /* if reconnect_sh doesn't begin with '/', it's a relative path to XRDP_CFG_PATH */
-+    /* if reconnect_sh doesn't begin with '/', it's a relative path to /usr/libexec/xrdp */
-     if (cf->reconnect_sh[0] != '/')
-     {
-         /* sizeof operator returns string length including null terminator  */
--        length = sizeof(XRDP_CFG_PATH) + g_strlen(cf->reconnect_sh) + 1; /* '/' */
-+        length = sizeof("/usr/libexec/xrdp") + g_strlen(cf->reconnect_sh) + 1; /* '/' */
-         buf = (char *)g_malloc(length, 0);
--        g_sprintf(buf, "%s/%s", XRDP_CFG_PATH, cf->reconnect_sh);
-+        g_sprintf(buf, "%s/%s", "/usr/libexec/xrdp", cf->reconnect_sh);
-         g_free(cf->reconnect_sh);
-         cf->reconnect_sh = g_strdup(buf);
-         g_free(buf);

xrdp-0.9.17-xrdp-ini.patch

@@ -1,70 +0,0 @@
-diff -ruN xrdp-0.9.17-v/xrdp/xrdp.ini xrdp-0.9.17/xrdp/xrdp.ini
---- xrdp-0.9.17-v/xrdp/xrdp.ini	2021-09-01 11:32:12.000000000 +1000
-+++ xrdp-0.9.17/xrdp/xrdp.ini	2021-09-01 13:06:55.525816406 +1000
-@@ -203,14 +203,14 @@
- ; Some session types such as Xorg, X11rdp and Xvnc start a display server.
- ; Startup command-line parameters for the display server are configured
- ; in sesman.ini. See and configure also sesman.ini.
--[Xorg]
--name=Xorg
--lib=libxup.so
--username=ask
--password=ask
--ip=127.0.0.1
--port=-1
--code=20
-+#[Xorg]
-+#name=Xorg
-+#lib=libxup.so
-+#username=ask
-+#password=ask
-+#ip=127.0.0.1
-+#port=-1
-+#code=20
- 
- [Xvnc]
- name=Xvnc
-@@ -232,13 +232,13 @@
- ; Generic VNC Proxy
- ; Tailor this to specific hosts and VNC instances by specifying an ip
- ; and port and setting a suitable name.
--[vnc-any]
--name=vnc-any
--lib=libvnc.so
--ip=ask
--port=ask5900
--username=na
--password=ask
-+#[vnc-any]
-+#name=vnc-any
-+#lib=libvnc.so
-+#ip=ask
-+#port=ask5900
-+#username=na
-+#password=ask
- #pamusername=asksame
- #pampassword=asksame
- #pamsessionmng=127.0.0.1
-@@ -247,15 +247,15 @@
- ; Generic RDP proxy using NeutrinoRDP
- ; Tailor this to specific hosts by specifying an ip and port and setting
- ; a suitable name.
--[neutrinordp-any]
--name=neutrinordp-any
-+#[neutrinordp-any]
-+#name=neutrinordp-any
- ; To use this section, you should build xrdp with configure option
- ; --enable-neutrinordp.
--lib=libxrdpneutrinordp.so
--ip=ask
--port=ask3389
--username=ask
--password=ask
-+#lib=libxrdpneutrinordp.so
-+#ip=ask
-+#port=ask3389
-+#username=ask
-+#password=ask
- ; Uncomment the following lines to enable PAM authentication for proxy
- ; connections.
- #pamusername=ask

xrdp-0.9.20-sesman-ini.patch

@@ -1,12 +0,0 @@
-diff -ruN xrdp-0.9.20-v/sesman/sesman.ini xrdp-0.9.20/sesman/sesman.ini
---- xrdp-0.9.20-v/sesman/sesman.ini	2022-09-15 15:59:55.000000000 +1000
-+++ xrdp-0.9.20/sesman/sesman.ini	2022-09-15 17:40:10.032704634 +1000
-@@ -111,7 +111,7 @@
- ; CentOS 8              :  param=/usr/libexec/Xorg
- ; FreeBSD (from 2022Q4) :  param=/usr/local/libexec/Xorg
- ;
--param=Xorg
-+param=/usr/libexec/Xorg
- ; Leave the rest parameters as-is unless you understand what will happen.
- param=-config
- param=xrdp/xorg.conf

xrdp-0.9.22.1-no-c99.patch

@@ -1,16 +0,0 @@
-diff -rup xrdp-0.9.22.1-v/sesman/chansrv/sound.c xrdp-0.9.22.1/sesman/chansrv/sound.c
---- xrdp-0.9.22.1-v/sesman/chansrv/sound.c	2023-05-23 10:18:50.000000000 +1000
-+++ xrdp-0.9.22.1/sesman/chansrv/sound.c	2023-05-23 12:35:50.273215167 +1000
-@@ -1116,9 +1116,11 @@ process_pcm_message(int id, int size, st
-                 char *buf = (char *) g_malloc(g_bbuf_size, 0);
-                 if (buf != NULL)
-                 {
-+                    int i;
-+
-                     silence_start_time = g_time3();
-                     sending_silence = 1;
--                    for (int i = 0; i < send_silence_times; i++)
-+                    for (i = 0; i < send_silence_times; i++)
-                     {
-                         g_memset(buf, 0, g_bbuf_size);
-                         sound_send_wave_data_chunk(buf, g_bbuf_size);

xrdp-0.9.4-service.patch

@@ -1,47 +0,0 @@
-diff -ruN xrdp-0.9.4-v/instfiles/xrdp.service.in xrdp-0.9.4/instfiles/xrdp.service.in
---- xrdp-0.9.4-v/instfiles/xrdp.service.in	2017-07-19 14:23:49.000000000 +1000
-+++ xrdp-0.9.4/instfiles/xrdp.service.in	2017-10-06 14:29:13.910973750 +1100
-@@ -2,15 +2,11 @@
- Description=xrdp daemon
- Documentation=man:xrdp(8) man:xrdp.ini(5)
- Requires=xrdp-sesman.service
--After=network.target xrdp-sesman.service
-+After=xrdp-sesman.service
- 
- [Service]
--Type=forking
--PIDFile=@localstatedir@/run/xrdp.pid
--EnvironmentFile=-@sysconfdir@/sysconfig/xrdp
--EnvironmentFile=-@sysconfdir@/default/xrdp
--ExecStart=@sbindir@/xrdp $XRDP_OPTIONS
--ExecStop=@sbindir@/xrdp $XRDP_OPTIONS --kill
-+EnvironmentFile=@sysconfdir@/sysconfig/xrdp
-+ExecStart=@sbindir@/xrdp $XRDP_OPTIONS --nodaemon
- 
- [Install]
- WantedBy=multi-user.target
-diff -ruN xrdp-0.9.4-v/instfiles/xrdp-sesman.service.in xrdp-0.9.4/instfiles/xrdp-sesman.service.in
---- xrdp-0.9.4-v/instfiles/xrdp-sesman.service.in	2017-07-19 14:23:49.000000000 +1000
-+++ xrdp-0.9.4/instfiles/xrdp-sesman.service.in	2017-10-06 14:29:13.910973750 +1100
-@@ -1,17 +1,14 @@
- [Unit]
- Description=xrdp session manager
- Documentation=man:xrdp-sesman(8) man:sesman.ini(5)
--After=network.target
-+Wants=network-online.target nss-lookup.target nss-user-lookup.target
-+After=network-online.target nss-lookup.target nss-user-lookup.target
- StopWhenUnneeded=true
- BindsTo=xrdp.service
- 
- [Service]
--Type=forking
--PIDFile=@localstatedir@/run/xrdp-sesman.pid
--EnvironmentFile=-@sysconfdir@/sysconfig/xrdp
--EnvironmentFile=-@sysconfdir@/default/xrdp
--ExecStart=@sbindir@/xrdp-sesman $SESMAN_OPTIONS
--ExecStop=@sbindir@/xrdp-sesman $SESMAN_OPTIONS --kill
-+EnvironmentFile=@sysconfdir@/sysconfig/xrdp
-+ExecStart=@sbindir@/xrdp-sesman $SESMAN_OPTIONS --nodaemon
- 
- [Install]
- WantedBy=multi-user.target

xrdp-0.9.9-sesman.patch

@@ -1,12 +0,0 @@
-diff -ruN xrdp-0.9.9-v/sesman/sesman.ini xrdp-0.9.9/sesman/sesman.ini
---- xrdp-0.9.9-v/sesman/sesman.ini	2018-12-25 15:49:32.000000000 +1100
-+++ xrdp-0.9.9/sesman/sesman.ini	2019-01-11 19:19:42.253947862 +1100
-@@ -7,7 +7,7 @@
- ; Give in relative path to user's home directory
- UserWindowManager=startwm.sh
- ; Give in full path or relative path to /etc/xrdp
--DefaultWindowManager=startwm.sh
-+DefaultWindowManager=startwm-bash.sh
- ; Give in full path or relative path to /etc/xrdp
- ReconnectScript=reconnectwm.sh
- 

xrdp-sesman.pamd

@@ -1,11 +1,30 @@
 #%PAM-1.0
-# Generic Fedora config
+# Generic Fedora/RHEL config - use this unless you are running xrdp
+# sessions into a GNOME desktop, in which case use the Gnome-specific
+# config below instead, which also unlocks GNOME Keyring automatically.
 auth       include      password-auth
 account    include      password-auth
 password   include      password-auth
-session    include      password-auth
 
-# Gnome specific Fedora config
+# pam_selinux.so close must be the first session rule so any
+# prior context is torn down before we set up the new one.
+session    required     pam_selinux.so close
+session    required     pam_loginuid.so
+# pam_selinux.so open must run before any module below that
+# should execute in the user's context. Without this pair,
+# session processes are left running as unconfined_service_t
+# instead of unconfined_t. See rhbz#2499948.
+session    required     pam_selinux.so open
+session    required     pam_namespace.so
+session    optional     pam_keyinit.so force revoke
+session    include      password-auth
+session    optional     pam_lastlog.so silent
+
+# Gnome specific config. Uncomment this block and comment out the
+# generic block above if you are running xrdp sessions into a GNOME
+# desktop. This uses GDM's own PAM stack, which already includes the
+# correct pam_selinux.so/pam_namespace.so ordering and additionally
+# unlocks GNOME Keyring automatically at login.
 #auth       include      gdm-password
 #account    include      gdm-password
 #password   include      gdm-password

xrdp-tmpfiles.conf

@@ -0,0 +1,2 @@
+d /run/xrdp 0755 root root -
+R /run/xrdp 0755 root root -

xrdp.spec

@@ -1,3 +1,5 @@
+#%%global prerelease -rc.1
+
 %global _hardened_build 1
 
 %global selinux_types %(%{__awk} '/^#[[:space:]]*SELINUXTYPE=/,/^[^#]/ { if ($3 == "-") printf "%s ", $2 }' /etc/selinux/config 2>/dev/null)
@@ -13,33 +15,36 @@
 %global _missing_braces -Wno-error=missing-braces
 %endif
 
+%ifarch %{ix86}
+%global _file_offset_bits -D_FILE_OFFSET_BITS=64
+%endif
+
 Summary:   Open source remote desktop protocol (RDP) server
 Name:      xrdp
 Epoch:     1
-Version:   0.9.23.1
-Release:   1%{?dist}
-License:   ASL 2.0 and GPLv2+ and MIT
+Version:   0.10.6.1
+Release:   3%{?dist}
+# Automatically converted from old format: ASL 2.0 and GPLv2+ and MIT - review is highly recommended.
+License:   Apache-2.0 AND GPL-2.0-or-later AND LicenseRef-Callaway-MIT
 URL:       http://www.xrdp.org/
-Source0:   https://github.com/neutrinolabs/xrdp/releases/download/v%{version}/xrdp-%{version}.tar.gz
+Source0:   https://github.com/neutrinolabs/xrdp/releases/download/v%{version}%{?prerelease}/xrdp-%{version}%{?prerelease}.tar.gz
 Source1:   xrdp-sesman.pamd
 Source2:   xrdp.sysconfig
 Source3:   xrdp.logrotate
 Source4:   openssl.conf
-Source5:   README.Fedora
+Source5:   README.md
 Source6:   xrdp.te
 Source7:   xrdp-polkit-1.rules
-Patch0:    xrdp-0.9.9-sesman.patch
-Patch1:    xrdp-0.9.17-xrdp-ini.patch
-Patch2:    xrdp-0.9.4-service.patch
-Patch3:    xrdp-0.9.10-scripts-libexec.patch
+Source8:   %{name}-tmpfiles.conf
+Source9:   %{name}.sysusers
+Patch0:    xrdp-0.10.2-sesman.patch
+Patch2:    xrdp-0.10.1-service.patch
+Patch3:    xrdp-0.10.0-scripts-libexec.patch
 Patch4:    xrdp-0.9.6-script-interpreter.patch
 Patch5:    xrdp-0.9.16-arch.patch
 Patch6:    xrdp-0.9.18-vnc-uninit.patch
 %if 0%{?fedora} >= 32 || 0%{?rhel} >= 8
-Patch7:    xrdp-0.9.20-sesman-ini.patch
-%endif
-%if ! 0%{?fedora} && 0%{?rhel} <= 7
-Patch8:    xrdp-0.9.22.1-no-c99.patch
+Patch8:    xrdp-0.10.5-sesman-ini.patch
 %endif
 
 BuildRequires: make
@@ -51,20 +56,29 @@ BuildRequires: libXrandr-devel
 BuildRequires: imlib2-devel
 BuildRequires: openssl
 BuildRequires: pam-devel
-BuildRequires: pkgconfig(fuse)
+BuildRequires: pkgconfig(fuse3)
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(pixman-1)
 BuildRequires: pkgconfig(systemd)
 BuildRequires: nasm
+%if 0%{?fedora} || 0%{?rhel} > 8
+BuildRequires: noopenh264-devel
+%endif
 
 BuildRequires: checkpolicy, selinux-policy-devel
 BuildRequires: %{_hardlink}
 
+BuildRequires: systemd-rpm-macros
+%if 0%{?fedora} < 42 || 0%{?rhel}
+%{?sysusers_requires_compat}
+%endif
+
 # tigervnc-server-minimal provides Xvnc (default for now)
 # xorgxrdp is another back end, depends on specific Xorg binary, omit
 Requires: tigervnc-server-minimal
 Requires: xorg-x11-xinit
 Requires: util-linux
+Requires: fuse3
 
 %if 0%{?fedora} || 0%{?rhel} >= 8
 Recommends: %{name}-selinux = %{epoch}:%{version}-%{release}
@@ -75,6 +89,9 @@ Requires(post): systemd-sysv
 Requires(post): /sbin/ldconfig
 Requires(posttrans): openssl
 Requires(preun): systemd
+%if 0%{?fedora}
+Requires(preun): systemd-tmpfiles
+%endif
 Requires(posttrans): systemd
 
 
@@ -95,7 +112,9 @@ talk to xrdp.
 Summary: SELinux policy module required tu run xrdp
 
 Requires: %{name} = %{epoch}:%{version}-%{release}
+%if "%{_selinux_policy_version}" != ""
 Requires: selinux-policy >= %{_selinux_policy_version}
+%endif
 Requires(post): /usr/sbin/semodule
 Requires(postun): /usr/sbin/semodule
 
@@ -103,7 +122,7 @@ Requires(postun): /usr/sbin/semodule
 This package contains SELinux policy module necessary to run xrdp.
 
 %prep
-%autosetup -p1
+%autosetup -p1 -n %{name}-%{version}%{?prerelease}
 %{__cp} %{SOURCE5} .
 
 # SELinux policy module
@@ -116,9 +135,19 @@ echo '#!/bin/bash -l
 
 %build
 autoreconf -vif
-CFLAGS="$RPM_OPT_FLAGS %{?_missing_braces}" \
-%configure --enable-fuse --enable-pixman --enable-painter --enable-vsock \
-           --enable-ipv6 --with-socketdir=%{_rundir}/%{name} --with-imlib2
+CFLAGS="$RPM_OPT_FLAGS %{?_missing_braces} %{?_file_offset_bits}" \
+%configure --enable-fuse \
+           --enable-pixman \
+           --enable-painter \
+           --enable-vsock \
+           --enable-ipv6 \
+%if 0%{?fedora} || 0%{?rhel} > 8
+           --enable-openh264 \
+%endif
+           --enable-utmp \
+           --with-socketdir=%{_rundir}/%{name} \
+           --with-imlib2
+
 %make_build
 
 # SELinux policy module
@@ -156,6 +185,10 @@ cd -
 #install xrdp.rules /usr/share/polkit-1/rules.d
 %{__install} -Dp -m 644 %{SOURCE7} %{buildroot}%{_datadir}/polkit-1/rules.d/xrdp.rules
 
+# Temporary files for socket
+%{__mkdir_p} %{buildroot}%{_tmpfilesdir}
+%{__install} -m 0644 %{SOURCE8} %{buildroot}%{_tmpfilesdir}/%{name}.conf
+
 # SELinux policy module
 for selinuxvariant in %{selinux_variants}
 do
@@ -165,6 +198,13 @@ do
 done
 %{_hardlink} -cv %{buildroot}%{_datadir}/selinux
 
+%{__install} -p -D -m 0644 %{SOURCE9} %{buildroot}%{_sysusersdir}/xrdp.conf
+
+%if 0%{?fedora} < 42 || 0%{?rhel}
+%pre
+%sysusers_create_compat %{SOURCE9}
+%endif
+
 %post
 %{?ldconfig}
 %systemd_post xrdp.service
@@ -173,36 +213,42 @@ done
 %systemd_preun xrdp.service
 if [ $1 -eq 0 ]; then
   # Stop services on package removal (see bug 1349083)
-  systemctl stop xrdp.service > /dev/null 2>&1 || :
+  systemctl stop xrdp.service &>/dev/null || :
+  systemd-tmpfiles --remove %{name}.conf &>/dev/null || :
 fi
 
 %triggerun -- xrdp < 0.6.0-1
-systemd-sysv-convert --save xrdp >/dev/null 2>&1 ||:
+systemd-sysv-convert --save xrdp &>/dev/null || :
 
 # If the package is allowed to autostart:
-systemctl preset xrdp.service >/dev/null 2>&1 ||:
+systemctl preset xrdp.service &>/dev/null || :
 
 # Run these because the SysV package being removed won't do them
-/sbin/chkconfig --del xrdp >/dev/null 2>&1 || :
+/sbin/chkconfig --del xrdp &>/dev/null || :
 if [ "`systemctl is-active xrdp.service`" = 'active' ]; then
-    systemctl stop xrdp.service >/dev/null 2>&1 || :
-    systemctl start xrdp.service >/dev/null 2>&1 || :
+    systemctl stop xrdp.service &>/dev/null || :
+    systemctl start xrdp.service &>/dev/null || :
 fi
 
 %ldconfig_postun
 
 %posttrans
 if [ ! -s %{_sysconfdir}/xrdp/rsakeys.ini ]; then
-  (umask 377; touch %{_sysconfdir}/xrdp/rsakeys.ini; %{_bindir}/xrdp-keygen xrdp %{_sysconfdir}/xrdp/rsakeys.ini &>/dev/null)
+  (umask 0137
+   %{_bindir}/xrdp-keygen xrdp %{_sysconfdir}/xrdp/rsakeys.ini &>/dev/null)
 fi
 
 if [ ! -s %{_sysconfdir}/xrdp/cert.pem ]; then
-  (umask 377; openssl req -x509 -newkey rsa:2048 -sha256 -nodes -days 3652 \
-    -keyout %{_sysconfdir}/xrdp/key.pem \
-    -out %{_sysconfdir}/xrdp/cert.pem \
-    -config %{_sysconfdir}/xrdp/openssl.conf >/dev/null 2>&1)
+  (umask 0337
+   openssl req -x509 -newkey rsa:2048 -nodes -days 3652 \
+               -keyout %{_sysconfdir}/xrdp/key.pem \
+               -out %{_sysconfdir}/xrdp/cert.pem \
+               -config %{_sysconfdir}/xrdp/openssl.conf &>/dev/null)
 fi
 
+chgrp xrdp %{_sysconfdir}/xrdp/{rsakeys.ini,{key,cert}.pem}
+chmod 0640 %{_sysconfdir}/xrdp/{rsakeys.ini,{key,cert}.pem}
+
 %post selinux
 for selinuxvariant in %{selinux_variants}
 do
@@ -220,12 +266,14 @@ fi
 
 
 %files
-%doc COPYING README.Fedora
+%doc COPYING README.md
 %dir %{_libdir}/xrdp
 %dir %{_sysconfdir}/xrdp
 %dir %{_sysconfdir}/xrdp/pulse
 %dir %{_datadir}/xrdp
 %dir %{_libexecdir}/xrdp
+%{_tmpfilesdir}/%{name}.conf
+%{_sysusersdir}/xrdp.conf
 %config(noreplace) %{_sysconfdir}/xrdp/xrdp.ini
 %config(noreplace) %{_sysconfdir}/pam.d/xrdp-sesman
 %config(noreplace) %{_sysconfdir}/logrotate.d/xrdp
@@ -234,16 +282,21 @@ fi
 %config(noreplace) %{_sysconfdir}/xrdp/km*.ini
 %config(noreplace) %{_sysconfdir}/xrdp/openssl.conf
 %config(noreplace) %{_sysconfdir}/xrdp/xrdp_keyboard.ini
+%config(noreplace) %{_sysconfdir}/xrdp/gfx.toml
 %config(noreplace) %{_sysconfdir}/xrdp/pulse/default.pa
 %exclude %ghost %{_sysconfdir}/xrdp/*.pem
 %exclude %ghost %{_sysconfdir}/xrdp/rsakeys.ini
 %{_libexecdir}/xrdp/startwm*.sh
 %{_libexecdir}/xrdp/reconnectwm.sh
+%{_libexecdir}/xrdp/waitforx
+%{_libexecdir}/xrdp/xrdp-sesexec
+%{_libexecdir}/xrdp/xrdp-droppriv
 %{_bindir}/xrdp-genkeymap
 %{_bindir}/xrdp-sesadmin
 %{_bindir}/xrdp-keygen
 %{_bindir}/xrdp-sesrun
 %{_bindir}/xrdp-dis
+%{_bindir}/xrdp-dumpfv1
 %{_sbindir}/xrdp-chansrv
 %{_sbindir}/xrdp
 %{_sbindir}/xrdp-sesman
@@ -252,18 +305,19 @@ fi
 %{_datadir}/xrdp/cursor1.cur
 %{_datadir}/xrdp/xrdp256.bmp
 %{_datadir}/xrdp/sans-10.fv1
+%{_datadir}/xrdp/sans-18.fv1
 %{_datadir}/xrdp/ad24b.bmp
 %{_datadir}/xrdp/xrdp24b.bmp
 %{_datadir}/xrdp/xrdp_logo.bmp
+%{_datadir}/xrdp/xrdp_logo.png
+%{_datadir}/xrdp/xrdp-chkpriv
+%{_datadir}/xrdp/README.logo
 %{_datadir}/polkit-1/rules.d/xrdp.rules
 %{_mandir}/man5/*
 %{_mandir}/man8/*
 %{_mandir}/man1/*
-%{_libdir}/librfxencode.so*
 %{_libdir}/xrdp/lib*.so*
-%exclude %{_libdir}/librfxencode.so
 %exclude %{_libdir}/xrdp/libcommon.so
-%exclude %{_libdir}/xrdp/libscp.so
 %exclude %{_libdir}/xrdp/libxrdp.so
 %exclude %{_libdir}/xrdp/libxrdpapi.so
 %{_unitdir}/xrdp-sesman.service
@@ -285,9 +339,7 @@ fi
 %{_includedir}/ms-*
 %{_includedir}/xrdp*
 %{_includedir}/rfxcodec_*.h
-%{_libdir}/librfxencode.so
 %{_libdir}/xrdp/libcommon.so
-%{_libdir}/xrdp/libscp.so
 %{_libdir}/xrdp/libxrdp.so
 %{_libdir}/xrdp/libxrdpapi.so
 %{_libdir}/pkgconfig/rfxcodec.pc
@@ -298,6 +350,134 @@ fi
 %{_datadir}/selinux/*/%{name}.pp
 
 %changelog
+* Sat Jul 18 2026 Bojan Smojver <bojan@rexursive.com> - 1:0.10.6.1-3
+- Fix bug #2499948
+
+* Tue Jul 07 2026 Bojan Smojver <bojan@rexursive.com> - 1:0.10.6.1-1
+- Update to 0.10.6.1
+- CVE-2026-41252, CVE-2026-41521, CVE-2026-44178, CVE-2026-42218
+- CVE-2026-44978, CVE-2026-54538, CVE-2026-55238, CVE-2026-55626
+- CVE-2026-55639, CVE-2026-55645
+
+* Sat Jun 13 2026 Yaakov Selkowitz <yselkowi@redhat.com> - 1:0.10.6-3
+- Rebuilt for openssl 4.0
+
+* Fri May 22 2026 Bojan Smojver <bojan@rexursive.com> - 1:0.10.6-2
+- close TCP port in default Xvnc config, Unix domain socket only
+
+* Sat Apr 18 2026 Bojan Smojver <bojan@rexursive.com> - 1:0.10.6-1
+- Update to 0.10.6
+- CVE-2026-32105, CVE-2026-32107, CVE-2026-32623, CVE-2026-32624
+- CVE-2026-33145, CVE-2026-33516, CVE-2026-33689, CVE-2026-35512
+
+* Wed Jan 28 2026 Bojan Smojver <bojan@rexursive.com> - 1:0.10.5-1
+- Update to 0.10.5
+
+* Sat Jan 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1:0.10.4-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+
+* Tue Nov  4 2025 Tom Callaway <spot@fedoraproject.org> - 1:0.10.4-4
+- rebuild for new fuse3
+
+* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:0.10.4-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Mon Jul  7 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.4-2
+- Patch upstream issue #3558, fix by matt335672
+
+* Thu Jul  3 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.4-1
+- Update to 0.10.4
+
+* Tue Apr  1 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.3-1
+- Update to 0.10.3
+- Enable Xvnc over Unix domain socket
+
+* Wed Mar 26 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-13
+- Rebuild for noopenh264 2.6.0, once more
+
+* Thu Mar 13 2025 Fabio Valentini <decathorpe@gmail.com> - 1:0.10.2-12
+- Rebuild for noopenh264 2.6.0
+
+* Thu Mar  6 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-11
+- Drop call to %sysusers_create_compat only in Fedora 42 and above
+- Add fuse3 dependency BZ#2350108
+
+* Tue Feb 11 2025 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1:0.10.2-10
+- Drop call to %sysusers_create_compat
+
+* Thu Feb  6 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-9
+- Add utmp support contributed upstream by Magnus Lewis-Smith
+
+* Sun Jan 19 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:0.10.2-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Sun Jan  5 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-7
+- Comment out generic RDP proxy in xrdp.ini
+
+* Sun Jan  5 2025 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-6
+- Set permissions of cert, key and rsakeys.ini to 0640
+- Revert optional dependency on noopenh264, library dependency exists
+
+* Fri Dec 27 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-5
+- Move README.Fedora to README.md
+- Adjust ownership/permissions of certs/keys for unprivileged user
+
+* Thu Dec 26 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-4
+- If openh264 is not present, require noopenh264 instead
+
+* Wed Dec 25 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-3
+- Run as unprivileged user
+
+* Wed Dec 25 2024 Koichiro Iwao <meta@almalinux.org> - 1:0.10.2-2
+- Enable OpenH264
+
+* Wed Dec 25 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2-1
+- Update to 0.10.2
+
+* Tue Dec 24 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.2~0.rc1.1
+- Update to 0.10.2-rc.1
+
+* Wed Sep  4 2024 Miroslav Suchý <msuchy@redhat.com> - 1:0.10.1-2
+- convert license to SPDX
+
+* Wed Jul 31 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.1-1
+- Update to 0.10.1
+
+* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:0.10.0-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Sat Jun  1 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-4
+- Explain downgrades from 0.10.x to 0.9.x in README.Fedora
+
+* Tue May 14 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-3
+- Only require systemd-tmpfiles on Fedora
+
+* Tue May 14 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-2
+- Explicitly run systemd-tmpfiles --remove on package removal BZ#2279775
+
+* Tue May 14 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-1
+- Update to 0.10.0
+- Revert PR 2994
+
+* Wed Apr 03 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-0.beta.2
+- Update to 0.10.0-beta.2
+
+* Wed Mar 13 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.9.25-2
+- Add upstream PR 2994
+
+* Tue Mar 12 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.9.25-1
+- Update to 0.9.25
+
+* Mon Mar 11 2024 Bojan Smojver <bojan@rexursive.com> - 1:0.10.0-0.beta.1
+- Update to 0.10.0-beta.1
+
+* Sat Jan 27 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:0.9.24-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Sun Dec 31 2023 Bojan Smojver <bojan@rexursive.com> - 1:0.9.24-1
+- Update to 0.9.24
+- Remove already applied patch affecting compilation on EL7
+
 * Thu Sep 28 2023 Bojan Smojver <bojan@rexursive.com> - 1:0.9.23.1-1
 - Update to 0.9.23.1
 - CVE-2023-42822

xrdp.sysusers

@@ -0,0 +1,2 @@
+#Type Name   ID  GECOS                        Home directory  Shell
+u     xrdp   -   "Unprivileged xrdp user"     /run/xrdp       /sbin/nologin