dist-git conversion

#2781)

.gitignore

@@ -0,0 +1,3 @@
+yaboot-1.3.12.tar.gz
+yaboot-1.3.13.tar.gz
+yaboot-1.3.14.tar.gz

dead.package

@@ -1 +0,0 @@
-2014-06-02: ppc32 package, ppc32 support is dropped in Fedora 21

efika.forth

@@ -0,0 +1,336 @@
+\ FORTH
+
+." Efika 5200B Device Tree Supplement 20071114" cr
+." (c) 2007 Genesi USA, Inc." cr 
+." http://www.powerdeveloper.org/ for support" cr cr
+
+\ headerless
+
+s" /openprom" find-device
+	d# 20071114 encode-int s" device-tree-version" property
+device-end
+
+s" /builtin/ata" find-device 
+	s" mpc5200-ata" encode-string
+	s" mpc5200b-ata" encode-string encode+
+	s" compatible" property
+device-end
+
+s" /builtin/sound" find-device
+	s" mpc5200-psc-ac97" encode-string
+	s" mpc5200b-psc-ac97" encode-string encode+
+	s" compatible" property
+
+	0x2 encode-int
+	0x2 encode-int encode+
+	0x3 encode-int encode+
+	s" interrupts" property
+
+	\ Audio is on PSC2, just for informational purposes
+	1 encode-int s" cell-index" property
+device-end
+
+\ Quick test to see if AC97 is enabled
+0xf0000b00 dup dup l@ 0x20 and
+0= if
+	." Enabling AC97" cr
+	dup l@ 0x20 or
+	swap l!
+else
+	drop
+then
+
+\ SRAM compatibles
+s" /builtin/sram" find-device
+	s" mpc5200-sram" encode-string
+	s" mpc5200b-sram" encode-string encode+
+	s" compatible" property
+	
+	s" sram" device-type \ this is a contentious one
+device-end
+
+\ PIC compatibles
+s" /builtin/pic" find-device
+	s" mpc5200-pic" encode-string
+	s" mpc5200b-pic" encode-string encode+
+	s" compatible" property
+device-end
+
+\ Serial compatibles. Also fix cell-index and port-number as per bindings
+s" /builtin/serial" find-device
+	s" mpc5200-psc-uart" encode-string
+	s" mpc5200b-psc-uart" encode-string encode+
+	s" compatible" property
+	
+	\ Serial port is PSC1 for informational purposes, Linux 0-indexes it
+	0 encode-int s" cell-index" property
+	\ Since this is the main, always there, preferred serial port..
+	0 encode-int s" port-number" property
+device-end
+
+\ Ethernet compatibles
+s" /builtin/ethernet" find-device
+	s" mpc5200-fec" encode-string
+	s" mpc5200b-fec" encode-string encode+
+	s" compatible" property
+device-end
+
+\ BestComm compatibles, interrupt mess
+s" /builtin/bestcomm" find-device
+	s" mpc5200-bestcomm" encode-string
+	s" mpc5200b-bestcomm" encode-string
+	encode+
+	s" compatible" property
+		
+	\ make 16 interrupt property in a batch. We have to do the first one by
+	\ hand simply because of the way encode+ works.
+
+	0x3 encode-int 0x0 encode-int 0x3 encode-int encode+ encode+
+	0x10 1 do 
+		0x3 encode-int encode+ i encode-int encode+ 0x3 encode-int encode+
+	loop
+	
+	\ now we can store the damn thing
+	s" interrupts" property
+device-end
+
+\ New USB binding - change one of the numbers here to disable it for older kernels
+\ as this is a destructive change
+0 1 = if
+s" /builtin/usb" find-device
+	s" usb-ohci" device-type
+	s" " encode-string s" big-endian" property
+
+	s" mpc5200-ohci" encode-string
+	s" mpc5200-usb-ohci" encode-string encode+
+	s" compatible" property
+device-end
+then
+
+\ Go into the root node and kill off any mention of CHRP
+s" /" find-device
+	s" efika" device-type
+	s" Efika 5200B" encode-string s" CODEGEN,board" property
+	s" Efika 5200B PowerPC System" encode-string s" CODEGEN,description" property
+device-end
+
+\ Fix the /builtin device-type for Linux
+s" /builtin" find-device
+	s" soc" device-type
+device-end
+
+\ ADDING NEW ENTRIES TO THE DEVICE TREE
+\
+\ Clock Distribution Module - need this to change baud rates etc. and turn off
+\ clocks for power management. Useful little thing. Needs an entry to find the
+\ address without guessing (in case they change it in the 512X)
+
+\ Clock Distribution Module
+." Adding Clock Distribution Module" cr
+
+s" /builtin" find-device
+new-device
+	" cdm" 2dup device-name device-type
+	" MPC52xx Clock Distribution Module" encode-string " .description" property
+	0xf0000200 0x38 reg
+
+	" mpc5200-cdm" encode-string 
+	" mpc5200b-cdm" encode-string
+	encode+
+	" compatible" property
+
+finish-device
+
+\ GPIO (Simple) Module
+." Adding Simple GPIO Module" cr
+
+s" /builtin" find-device
+new-device
+	s" gpio" 2dup device-name device-type
+	s" MPC52xx Simple GPIO" encode-string s" .description" property
+	0xf0000b00 0x40 reg
+
+	s" mpc5200-gpio" encode-string
+	s" mpc5200b-gpio" encode-string encode+ 
+	s" compatible" property
+
+	0x10000000 encode-int s" gpio-mask" property
+
+	0x1 encode-int
+	0x7 encode-int
+	0x3 encode-int
+	encode+ encode+
+	s" interrupts" property
+finish-device
+
+\ GPIO (Wakeup) Module
+." Adding Wakeup GPIO Module" cr
+
+s" /builtin" find-device
+new-device
+	s" gpio-wkup" 2dup device-name device-type
+	s" MPC52xx Wakeup GPIO" encode-string s" .description" property
+	0xf0000c00 0x28 reg
+
+	s" mpc5200-gpio-wkup" encode-string
+	s" mpc5200b-gpio-wkup" encode-string
+	encode+
+	s" compatible" property
+	
+	0x30000000 encode-int s" gpio-mask" property
+
+	0x1 encode-int
+	0x8 encode-int encode+
+	0x3 encode-int encode+
+	0x1 encode-int encode+
+	0x3 encode-int encode+
+	0x3 encode-int encode+
+	s" interrupts" property
+finish-device
+
+\
+\ High resolution (General Purpose and Slice) Timers
+\
+\ We ignore slice timer 0 since critical interrupt handling in Linux
+\ is curiously missing
+." Adding Slice Timer 1" cr
+
+s" /builtin" find-device
+new-device
+	s" slt" 2dup device-name device-type
+	s" MPC52xx Slice Timer 1" encode-string " .description" property
+	0xf0000710 0x10 reg
+	
+	s" mpc5200-slt" encode-string 
+	s" mpc5200b-slt" encode-string
+	encode+
+	s" compatible" property
+
+	1 encode-int " cell-index" property
+
+	\ The interrupt listed here is probably wrong
+	0x1 encode-int
+	0x0 encode-int encode+
+	0x3 encode-int encode+ 
+	s" interrupts" property
+finish-device
+
+\ Add all the GPTs to the device-tree
+\ : gpt-add ( gpt-id -- )
+\ depth                  
+\ 1 > if                 
+8 0 do i
+	dup 7 <= if    
+		dup    
+		0x9 +  
+		swap dup
+		0x10 *  
+		0xf0000600 +
+		swap dup    
+
+		." Adding General Purpose Timer " .d cr 
+
+ 		s" /builtin" find-device
+		new-device
+		
+		s" gpt" 2dup device-name device-type   
+		swap 0x10 reg                      
+
+		encode-int s" cell-index" property   
+		
+		s" MPC52xx General Purpose Timer X"
+		2dup + 1 -  		\ get the character position of the X
+		0x30 i + swap c! 	\ store ascii character of timer number
+		encode-string s" .description" property
+		
+		s" mpc5200-gpt" encode-string
+		s" mpc5200b-gpt" encode-string encode+
+		s" fsl,mpc5200-gpt" encode-string encode+
+		s" fsl,mpc5200b-gpt" encode-string encode+ 
+		s" compatible" property
+		
+		0x1 encode-int                        
+		2 pick encode-int encode+			
+		0x3 encode-int encode+
+		s" interrupts" property
+		
+		finish-device
+	then
+loop
+\ then
+\ ;
+
+\ Add watchdog marker to GPT0
+s" /builtin/gpt@f0000600" find-device
+	s" " encode-string s" has-wdt" property
+	s" " encode-string s" fsl,has-wdt" property
+device-end
+
+\ PHY for ethernet. Thanks to Domen Puncer for this.
+." Adding Ethernet PHY" cr
+
+s" /builtin" find-device
+new-device
+	1 encode-int s" #address-cells" property
+	0 encode-int s" #size-cells" property
+	s" mdio" 2dup device-name device-type
+	s" mpc5200b-fec-phy" encode-string s" compatible" property
+	0xf0003000 0x400 reg
+
+	0x2 encode-int
+	0x5 encode-int encode+
+	0x3 encode-int encode+
+	s" interrupts" property
+
+	new-device
+		s" ethernet-phy" 2dup device-name device-type
+		0x10 encode-int s" reg" property
+
+		my-self		\ save our phandle to stack
+		ihandle>phandle
+	finish-device
+finish-device
+
+s" /builtin/ethernet" find-device
+	encode-int		\ phy's phandle
+	s" phy-handle" property
+device-end
+
+\
+\ HERE BE DRAGONS
+
+\ SDRAM Controller (needed to enter deep sleep and turn off RAM clocks)
+." Adding SDRAM Controller" cr
+
+s" /builtin" find-device
+new-device
+	s" sdram" device-name
+	s" memory-controller" device-type
+
+	0xf0000100 0x10 reg
+
+	s" MPC52xx SDRAM Memory Controller" encode-string s" .description" property	
+	
+	s" mpc5200b-sdram" encode-string
+	s" mpc5200-sdram" encode-string encode+
+	s" compatible" property
+finish-device	
+
+\ XLB Arbiter (pipeline/bestcomm stuff enabled here)
+." Adding XLB Arbiter" cr
+
+s" /builtin" find-device
+new-device
+	s" xlb" 2dup device-name device-type
+
+	0xf0001f00 0x100 reg
+
+	s" MPC52xx XLB Arbiter" encode-string s" .description" property	
+	
+	s" mpc5200-xlb" encode-string
+	s" mpc5200b-xlb" encode-string encode+
+	s" compatible" property
+finish-device
+
+\ Optionally uncomment and boot your Linux
+\ s" hd:0 vmlinuz console= blah=" $boot

mirrors

@@ -0,0 +1,3 @@
+http://penguinppc.org/projects/yaboot/
+http://penguinppc.org/~eb/yaboot-archived/
+http://penguinppc.org/~eb/yaboot-archived/yaboot.old/

sources

@@ -0,0 +1,3 @@
+85cf685c1dc5873c2a5124ba4524b2d2  yaboot-1.3.12.tar.gz
+f12798d1b2063f21d07e0ae7f602ccaf  yaboot-1.3.13.tar.gz
+dd346812667ab3818248c9784fe8e38e  yaboot-1.3.14.tar.gz

upstream

@@ -0,0 +1 @@
+yaboot-1.3.12.tar.gz

upstream-key.gpg

@@ -0,0 +1,37 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.2.4 (GNU/Linux)
+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+=AFhg
+-----END PGP PUBLIC KEY BLOCK-----

yaboot-1.3.10-configfile.patch

@@ -0,0 +1,27 @@
+--- yaboot-1.3.10/ybin/yabootconfig.configfile	2003-06-19 17:33:50.000000000 -0400
++++ yaboot-1.3.10/ybin/yabootconfig	2003-06-19 17:39:26.000000000 -0400
+@@ -103,6 +103,7 @@
+ 			       default: determined from {chroot}/etc/fstab
+   -b, --boot                 set bootstrap partition, Example: /dev/hda2
+ 			       default: first type: Apple_Bootstrap partition
++  -C, --config               set config file name (Example: /etc/yaboot.conf)
+       --kernel-args          add an append= line with specified arguments
+   -q, --quiet                don't ask any questions/confirmation
+       --noinstall            don't automatically run mkofboot
+@@ -330,6 +331,16 @@
+                     exit 1
+                 fi
+ 		;;
++	    -C|--config)
++		if [ -n "$2" ]; then
++		    CONFIG="$2"
++		    shift 2
++		else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
+ 	    -q|--quiet)
+ 		QUIET=1
+ 		shift 1

yaboot-1.3.10-ext3.patch

@@ -0,0 +1,11 @@
+--- yaboot-1.3.10/second/fs_ext2.c.ext3	2003-04-09 21:38:48.000000000 -0400
++++ yaboot-1.3.10/second/fs_ext2.c	2003-04-09 21:40:32.000000000 -0400
+@@ -189,7 +189,7 @@
+      ofopened = 1;
+ 
+      /* Open the ext2 filesystem */
+-     result = ext2fs_open (buffer, EXT2_FLAG_RW, 0, 0, linux_io_manager, &fs);
++     result = ext2fs_open (buffer, EXT2_FLAG_DIRTY, 0, 0, linux_io_manager, &fs);
+      if (result) {
+ 
+ 	  if(result == EXT2_ET_BAD_MAGIC)

yaboot-1.3.10-parted.patch

@@ -0,0 +1,29 @@
+--- yaboot-1.3.10/ybin/yabootconfig~	2004-04-20 16:20:13.619375616 -0400
++++ yaboot-1.3.10/ybin/yabootconfig	2004-04-20 16:32:40.519829488 -0400
+@@ -160,6 +160,8 @@
+ 	FDISK=mac-fdisk
+     elif (command -v pdisk > /dev/null 2>&1) ; then
+ 	FDISK=pdisk
++    elif (command -v parted > /dev/null 2>&1) ; then
++	FDISK=parted
+     else
+ 	echo 1>&2 "$PRG: Unable to locate mac-fdisk"
+ 	return 1
+@@ -209,9 +211,16 @@
+ 		BOOT="${DISK}${BOOT}"
+ 	    fi
+ 	    debug "BOOT after fixup: $BOOT\n"
+-	else
++	elif [ "$FDISK" = mac-fdisk ] ; then
+ 	    BOOT="$(v=`$FDISK -l "$DISK" 2>/dev/null | grep '\<Apple_Bootstrap\>'` ; echo ${v%%[ ]*})"
+ 	    debug "BOOT=$BOOT\n"
++	else
++	    BOOT="$(v=`$FDISK "$DISK" print 2>/dev/null | grep 'bootstrap'` ; echo ${v%%[ ]*})"
++	    debug "BOOT before fixup: $BOOT\n"
++	    if [ -n "$BOOT" ] ; then
++		BOOT="${DISK}${BOOT}"
++	    fi
++	    debug "BOOT after fixup: $BOOT\n"
+ 	fi
+ 	if [ -z "$BOOT" ] ; then
+ 	    echo 1>&2 "$PRG: Unable to locate bootstrap partition on $DISK..."

yaboot-1.3.10-proddiscover.patch

@@ -0,0 +1,59 @@
+--- yaboot-1.3.10/first/ofboot.name	2003-04-09 21:29:29.000000000 -0400
++++ yaboot-1.3.10/first/ofboot	2003-04-09 21:29:55.000000000 -0400
+@@ -86,6 +86,13 @@
+     MENU=1
+ fi
+ 
++if [ -f /etc/redhat-release ]; then
++    PRODUCT=`sed "s/ release.*//g" /etc/redhat-release`
++else
++    PRODUCT="PowerPC GNU/Linux"
++fi
++   
++
+ ## create the variables.
+ ##
+ ## OSNAME="$1"
+@@ -102,7 +109,7 @@
+ 	[ "$DEBUG" = 1 ] && $PRINTF 1>&2 "$PRG: DEBUG: file1: $5\n"
+ 	[ "$COUNT" = "$OSNUM" ] && c="."
+ 	BTYA=": boot$1 \" Loading second stage bootstrap...\" .printf 100 ms load-base release-load-area \" ${4}${5}\" \$boot ;"
+-	MENUYA="\" Press $3 for Red Hat Linux${c-,}\"(0d 0a)\" .printf"
++	MENUYA="\" Press $3 for $PRODUCT${c-,}\"(0d 0a)\" .printf"
+ 	GETYA="      ascii $3 of \" $3 \"(0d 0a)\" .printf boot$1 endof"
+ 	shift 5
+ 	COUNT="$(($COUNT + 1))"
+@@ -315,7 +322,7 @@
+ MacRISC MacRISC3 MacRISC4
+ </COMPATIBLE>
+ <DESCRIPTION>
+-Red Hat Linux First Stage Bootstrap
++$PRODUCT First Stage Bootstrap
+ </DESCRIPTION>
+ <BOOT-SCRIPT>
+ : .printf fb8-write drop ;
+@@ -336,7 +343,7 @@
+ $BGCOLOR to background-color
+ \" \"(0C)\" .printf
+ 
+-\" First Stage Red Hat Linux Bootstrap\"(0d 0a)\" .printf
++\" First Stage $PRODUCT Bootstrap\"(0d 0a)\" .printf
+ \"  \"(0d 0a)\" .printf
+ $MENUOPTS
+ \"  \"(0d 0a)\" .printf
+--- yaboot-1.3.10/ybin/yabootconfig.name	2003-04-09 21:24:20.000000000 -0400
++++ yaboot-1.3.10/ybin/yabootconfig	2003-04-09 21:27:07.000000000 -0400
+@@ -700,7 +700,12 @@
+     ENABLENETBOOT="enablenetboot\n"
+ fi
+ 
+-MESG='"Welcome to Red Hat Linux!\\nHit <TAB> for boot options.\\n\\n"'
++if [ -f /etc/redhat-release ]; then
++    PRODUCT=`sed "s/ release.*//g" /etc/redhat-release`
++else
++    PRODUCT="PowerPC GNU/Linux"
++fi
++MESG="\"Welcome to $PRODUCT!\\nHit <TAB> for boot options.\\n\\n\""
+ 
+ ## generate global section of yaboot.conf
+ GLOBAL="boot=${BOOT}${DEVICE:-}

yaboot-1.3.10-sbindir.patch

@@ -0,0 +1,51 @@
+--- yaboot-1.3.10/Makefile.sbindir	2003-04-28 18:14:43.000000000 -0400
++++ yaboot-1.3.10/Makefile	2003-04-28 18:15:44.000000000 -0400
+@@ -9,6 +9,7 @@
+ ROOT =
+ PREFIX = usr/local
+ MANDIR = man
++SBINDIR= ${PREFIX}/sbin
+ # command used to get root (needed for tarball creation)
+ GETROOT = fakeroot
+ 
+@@ -179,7 +180,7 @@
+ 
+ install: all strip
+ 	install -d -m 0755 ${ROOT}/etc/
+-	install -d -m 0755 ${ROOT}/${PREFIX}/sbin/
++	install -d -m 0755 ${ROOT}/${SBINDIR}
+ 	install -d -m 0755 ${ROOT}/${PREFIX}/lib
+ 	install -d -m 0755 ${ROOT}/${PREFIX}/lib/yaboot
+ 	install -d -m 0755 ${ROOT}/${PREFIX}/${MANDIR}/man5/
+@@ -187,11 +188,11 @@
+ 	install -m 0644 second/yaboot ${ROOT}/$(PREFIX)/lib/yaboot
+ 	install -m 0755 util/addnote ${ROOT}/${PREFIX}/lib/yaboot/addnote
+ 	install -m 0644 first/ofboot ${ROOT}/${PREFIX}/lib/yaboot/ofboot
+-	install -m 0755 ybin/ofpath ${ROOT}/${PREFIX}/sbin/ofpath
+-	install -m 0755 ybin/ybin ${ROOT}/${PREFIX}/sbin/ybin
+-	install -m 0755 ybin/yabootconfig ${ROOT}/${PREFIX}/sbin/yabootconfig
+-	rm -f ${ROOT}/${PREFIX}/sbin/mkofboot
+-	ln -s ybin ${ROOT}/${PREFIX}/sbin/mkofboot
++	install -m 0755 ybin/ofpath ${ROOT}/${SBINDIR}/ofpath
++	install -m 0755 ybin/ybin ${ROOT}/${SBINDIR}/ybin
++	install -m 0755 ybin/yabootconfig ${ROOT}/${SBINDIR}/yabootconfig
++	rm -f ${ROOT}/${SBINDIR}/mkofboot
++	ln -s ybin ${ROOT}/${SBINDIR}/mkofboot
+ 	@gzip -9 man/*.[58]
+ 	install -m 0644 man/bootstrap.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/bootstrap.8.gz
+ 	install -m 0644 man/mkofboot.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/mkofboot.8.gz
+@@ -216,10 +217,10 @@
+ 	@echo
+ 
+ deinstall:
+-	rm -f ${ROOT}/${PREFIX}/sbin/ofpath
+-	rm -f ${ROOT}/${PREFIX}/sbin/ybin
+-	rm -f ${ROOT}/${PREFIX}/sbin/yabootconfig
+-	rm -f ${ROOT}/${PREFIX}/sbin/mkofboot
++	rm -f ${ROOT}/${SBINDIR}/ofpath
++	rm -f ${ROOT}/${SBINDIR}/ybin
++	rm -f ${ROOT}/${SBINDIR}/yabootconfig
++	rm -f ${ROOT}/${SBINDIR}/mkofboot
+ 	rm -f ${ROOT}/${PREFIX}/lib/yaboot/yaboot
+ 	rm -f ${ROOT}/${PREFIX}/lib/yaboot/ofboot
+ 	rm -f ${ROOT}/${PREFIX}/lib/yaboot/addnote

yaboot-1.3.13-allow-deep-mntpoint.patch

@@ -0,0 +1,32 @@
+--- yaboot-1.3.13/ybin/ybin~	2005-08-10 15:09:32.000000000 +0100
++++ yaboot-1.3.13/ybin/ybin	2005-08-11 16:13:36.000000000 +0100
+@@ -353,17 +353,19 @@ checkconf()
+ 	fi
+ 
+ 	## make sure $mntpoint is on $boot, this matters to nvram updating.
+-	if [ "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})" != "$boot" -a -d "$mntpoint" ] ; then
+-	    echo 1>&2 "$PRG: $mntpoint is not located on $boot"
+-	    local CONFERR=1
+-	    ## more then one subdirectory deep is not supported. no sed available on boot floppies ( / -> \ )
+-	elif [ "$mntpoint" != "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v##*[ ]})" ] ; then
+-	    echo "$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")" | grep -q /
+-	    if [ $? = 0 ] ; then
+-		echo 1>&2 "$PRG:$ERR $mntpoint is more then one subdirectory deep from root of $boot"
++	if [ -n "$magicboot" -o "$nonvram" = 0 ]; then
++	    if [ "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})" != "$boot" -a -d "$mntpoint" ] ; then
++		echo 1>&2 "$PRG: $mntpoint is not located on $boot"
+ 		local CONFERR=1
+-	    else
+-		OFDIR="$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")"
++	    ## more than one subdirectory deep is not supported. no sed available on boot floppies ( / -> \ )
++	    elif [ "$mntpoint" != "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v##*[ ]})" ] ; then
++		echo "$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")" | grep -q /
++		if [ $? = 0 ] ; then
++		    echo 1>&2 "$PRG:$ERR $mntpoint is more then one subdirectory deep from root of $boot"
++		    local CONFERR=1
++		else
++		    OFDIR="$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")"
++		fi
+ 	    fi
+ 	fi
+ 

yaboot-1.3.13-dontwritehome.patch

@@ -0,0 +1,13 @@
+--- yaboot-1.3.13/ybin/ybin.dontwritehome	2006-08-10 14:33:06.000000000 -0400
++++ yaboot-1.3.13/ybin/ybin	2006-08-10 14:33:15.000000000 -0400
+@@ -821,6 +821,10 @@
+ 	    return 1
+ 	fi
+ 
++	## N.B.: SELinux does not like bootloader executables writing to 
++	## root's homedir, so we lie about HOME here.
++	export HOME=/boot
++
+ 	## hmount is really more of a way to make sure we have a valid HFS
+ 	## filesystem before proceding, and hcopy requires it...
+ 	hmount "$boot" > /dev/null

yaboot-1.3.13-pegasos-claim.patch

@@ -0,0 +1,15 @@
+--- yaboot-1.3.13/second/prom.c~	2003-11-04 09:13:17.000000000 +0000
++++ yaboot-1.3.13/second/prom.c	2005-07-29 13:19:35.000000000 +0100
+@@ -547,7 +547,11 @@ prom_sleep (int seconds)
+ void *
+ prom_claim (void *virt, unsigned int size, unsigned int align)
+ {
+-     return call_prom ("claim", 3, 1, virt, size, align);
++     void *ret = call_prom ("claim", 3, 1, virt, size, align);
++     /* Pegasos II SmartFirmware returns zero for failure, usefully */
++     if (virt && !ret)
++	  ret = (void *)-1;
++     return ret;
+ }
+ 
+ void

yaboot-1.3.13-pegasos-ext2.patch

@@ -0,0 +1,82 @@
+--- yaboot-1.3.13/ybin/ybin.ext2	2005-07-29 13:22:40.000000000 +0100
++++ yaboot-1.3.13/ybin/ybin	2005-07-29 13:23:01.000000000 +0100
+@@ -75,6 +75,8 @@ fi
+ usemount=no
+ if (cat /proc/cpuinfo 2> /dev/null | grep ^machine | grep -q 'CHRP IBM') ; then
+     fstype=raw
++elif (cat /proc/cpuinfo 2> /dev/null | grep ^machine | grep -q 'Pegasos') ; then
++    fstype=ext2
+ else
+     fstype=hfs
+ fi
+@@ -277,13 +279,13 @@ checkconf()
+     fi
+ 
+     case "$fstype" in
+-	hfs|msdos|raw)
++	hfs|msdos|raw|ext2)
+ 	 ;;
+ 	*)
+ 	 if [ "$ARGFS" = 1 ] ; then
+-	    echo 1>&2 "$PRG: --filesystem must be either \`hfs', \`msdos', or \`raw'"
++	    echo 1>&2 "$PRG: --filesystem must be either \`hfs', \`msdos', \`ext2' or \`raw'"
+ 	 else
+-	    echo 1>&2 "$PRG:$ERR \`fstype' must be either \`hfs', \`msdos', or \`raw'"
++	    echo 1>&2 "$PRG:$ERR \`fstype' must be either \`hfs', \`msdos', \`ext2' or \`raw'"
+ 	 fi
+ 	 local CONFERR=1
+ 	 ;;
+@@ -942,12 +944,16 @@ util_install()
+ ## used by mnt_install so mntpoint= can be supported in a cleaner way.
+ mnt()
+ {
++    local mountopts="rw"
++
+     ## we can even create bootstrap filesystem images directly if you
+     ## ever wanted too.
+     if [ -f "$boot" ] ; then
+-	local loop=",loop"
++	mountopts="$mountopts,loop"
++    fi
++    if [ "$fstype" = "msdos" ] ; then
++	mountopts="$mountopts,umask=077"
+     fi
+-
+     if [ -e "$TMP/bootstrap.$$" ] ; then
+ 	echo 1>&2 "$PRG: $TMP/bootstrap.$$ exists, aborting."
+ 	return 1
+@@ -966,7 +972,7 @@ mnt()
+     fi
+ 
+     [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting $boot..."
+-    mount -t "$fstype" -o rw,umask=077$loop "$boot" "$TMP/bootstrap.$$"
++    mount -t "$fstype" -o rw,$mountopts$loop "$boot" "$TMP/bootstrap.$$"
+     if [ $? != 0 ] ; then
+ 	echo 1>&2 "$PRG: An error occured mounting $boot"
+ 	return 1
+@@ -1252,6 +1258,25 @@ mkoffs()
+ 	    fi
+ 	    return 0
+ 	    ;;
++	ext2)
++	    if (command -v mkfs.ext2 > /dev/null 2>&1) ; then
++		[ -x `command -v mkfs.ext2` ] || FAIL=1 ; else FAIL=1 ; fi
++		if [ "$FAIL" = 1 ] ; then
++		    echo 1>&2 "$PRG: mkfs.ext2 is not installed or cannot be found"
++		    return 1
++		fi
++
++	    [ "$VERBOSE" = 1 ] && echo "$PRG: Creating ext2 filesystem on $boot..."
++            if (command -v dd > /dev/null 2>&1) ; then
++                dd if=/dev/zero of="$boot" bs=512 count=1600 > /dev/null 2>&1
++            fi  
++	    mkfs.ext2 -L bootstrap "$boot" > /dev/null
++            if [ $? != 0 ] ; then
++		echo 1>&2 "$PRG: ext2 filesystem creation failed!"
++		return 1
++	    fi
++	    return 0
++	    ;;
+     esac
+ }
+ 

yaboot-1.3.13-pegasos-serial.patch

@@ -0,0 +1,14 @@
+--- yaboot-1.3.13/second/prom.c~	2005-08-10 14:53:10.000000000 +0100
++++ yaboot-1.3.13/second/prom.c	2005-08-10 15:07:16.000000000 +0100
+@@ -368,10 +368,8 @@ prom_getchar ()
+      char c[4];
+      int a;
+ 
+-     while ((a = (int)call_prom ("read", 3, 1, prom_stdin, c, 4)) == 0)
++     while ((a = (int)call_prom ("read", 3, 1, prom_stdin, c, 4)) <= 0)
+ 	  ;
+-     if (a == -1)
+-	  prom_abort ("EOF on console\n");
+      if (a == 3 && c[0] == '\e' && c[1] == '[')
+ 	  return 0x100 | c[2];
+      return c[0];

yaboot-1.3.13-yabootconfig.patch

@@ -0,0 +1,249 @@
+--- yaboot-1.3.13/ybin/yabootconfig.yabootconfig	2005-07-25 16:09:39.000000000 -0400
++++ yaboot-1.3.13/ybin/yabootconfig	2005-07-25 16:25:03.000000000 -0400
+@@ -34,6 +34,7 @@
+ NOINSTALL=0
+ QUIET=0
+ DEBUG=0
++LABEL="Linux"
+ SIGINT="$PRG: Interrupt caught ... exiting"
+ export LC_COLLATE=C
+ 
+@@ -319,6 +320,16 @@
+                     exit 1
+                 fi
+ 		;;
++	    --kernel)
++                if [ -n "$2" ] ; then
++                    KERNELIMAGE="$2"
++                    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
+ 	    --kernel-args)
+                 if [ -n "$2" ] ; then
+                     KERNARGS="$2"
+@@ -347,10 +358,88 @@
+ 		NOINSTALL=1
+ 		shift 1
+ 		;;
++	    --enablecdboot)
++		CDBOOT=1
++		shift 1
++		;;
++	    --enablenetboot)
++		NETBOOT=1
++		shift 1
++		;;
+ 	    --debug)
+ 		DEBUG=1
+ 		shift 1
+ 		;;
++	    --delay)
++		if [ -n "$2" ] ; then
++		    DELAY=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --label)
++		if [ -n "$2" ] ; then
++		    LABEL=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --initrd)
++		if [ -n "$2" ] ; then
++		    INITRDPATH=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --macosx)
++		if [ -n "$2" ] ; then
++		    MACOSXDEV=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --macos)
++		if [ -n "$2" ] ; then
++		    MACOSDEV=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --darwin)
++		if [ -n "$2" ] ; then
++		    DARWINDEV=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
++	    --defaultos)
++		if [ -n "$2" ] ; then
++		    DEFOS=$2
++		    shift 2
++                else
++                    echo 1>&2 "$PRG: option requires an argument $1"
++                    echo 1>&2 "Try \`$PRG --help' for more information."
++                    exit 1
++                fi
++		;;
+             "")
+                 break
+                 ;;
+@@ -474,7 +563,7 @@
+ READLINKKV=`readlink /usr/src/linux`
+ ## find the kernel in the usual places and (if not --quiet) ask the
+ ## user if we cannot find one.
+-for k in "vmlinux" "vmlinux-`uname -r`" "vmlinux-`uname -r`" "$READLINKKV" ; do
++for k in "${KERNELIMAGE}" "vmlinux" "vmlinux-`uname -r`" "vmlinux-`uname -r`" "$READLINKKV" ; do
+	if [ -f "${CHROOT}${k}" ] ; then
+	    KERNEL="${CHROOT}${k}"
+	    break;
+@@ -721,6 +812,36 @@
+     HEADER="## see also: /usr/share/doc/yaboot/examples for example configurations.\n"
+ fi
+ 
++## find the kernel in the usual places and (if not --quiet) ask the
++## user if we cannot find one.
++if [ -f "${CHROOT}${INITRDPATH}" ] ; then
++    REALINITRD="${CHROOT}${INITRDPATH}"
++
++    ## if there is a separate /boot partition we must strip off the /boot
++    ## mountpoint or else yaboot will not find the kernel.
++    if [ "$KERNDIR" != "$CHROOT" ] ; then
++        INITRD="${REALINITRD##*$KERNDIR}"
++    else
++        INITRD="$REALINITRD"
++    fi
++
++    ## fix chrooted path
++    if [ "$CHROOT" != / ] ; then
++       INITRD="${INITRD##*$CHROOT}"
++    fi
++
++    ## fix relative path (caused by chroot path fix)
++    case "$INITRD" in
++        /*)
++        true
++        ;;
++        *)
++        INITRD="/${INITRD}"
++        ;;
++    esac
++    INITRDLINE="\tinitrd=$INITRD\n"
++fi
++
+ ## setup append line
+ if [ -n "$KERNARGS" ] ; then
+     APPEND="\tappend=\"${KERNARGS}\"\n"
+@@ -731,24 +850,64 @@
+     INITRDIMGS="\tinitrd=$INITRDIMG\n\tinitrd-size=8192\n"
+ fi
+ 
++## setup default OS bits for ybin
++if [ -n "$DEFOS" ] ; then
++   if [ "$DEFOS" = "macosx" ] ; then
++       DEFAULTOS="defaultos=${DEFOS}\n"
++   elif [ "$DEFOS" = "macos" ] ; then
++        DEFAULTOS="defaultos=${DEFOS}\n"
++   elif [ "$DEFOS" = "darwin" ] ; then
++         DEFAULTOS="defaultos=${DEFOS}\n"
++   else
++      DEFAULTOS="defaultos=linux\n"
++   fi
++else
++   DEFAULTOS="defaultos=linux\n"
++fi
++if [ -n "$DELAY" ] ; then
++    MENUDELAY="delay=${DELAY}\n"
++fi
++
++## setup enabling cd or network boot from OF
++if [ -n "$CDBOOT" ] ; then
++    ENABLECDBOOT="enablecdboot\n"
++fi
++if [ -n "$NETBOOT" ] ; then
++    ENABLENETBOOT="enablenetboot\n"
++fi
++
++MESG='"Welcome to Red Hat Linux!\\nHit <TAB> for boot options.\\n\\n"'
++
+ ## generate global section of yaboot.conf
+-GLOBAL="## yaboot.conf generated by $PRG $VERSION
+-##
+-## run: \"man yaboot.conf\" for details. Do not make changes until you have!!
+-${HEADER}##
+-## For a dual-boot menu, add one or more of:
+-## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ\n
+-boot=${BOOT}${DEVICE:-}
++GLOBAL="boot=${BOOT}${DEVICE:-}
++init-message=$MESG
+ partition=$PARTITION
+-root=$ROOT
+ timeout=30
+-install=${INSTALL}${OFBOOT:-}\n"
++install=${INSTALL}${OFBOOT:-}
++default=$LABEL
++${DEFAULTOS:-}${MENUDELAY:-}${ENABLECDBOOT:-}${ENABLENETBOOT:-}"
+ 
+ ## generate image= section
+ IMAGES="
+ image=$IMAGE
+-\tlabel=Linux
+-\tread-only\n${APPEND:-}${INITRDIMGS:-}"
++\tlabel=$LABEL
++\troot=$ROOT
++\tread-only\n
++${INITRDLINE-}${APPEND:-}"
++
++if [ -n "$MACOSXDEV" ] ; then
++    MACOSX="macosx=${MACOSXDEV}\n"
++fi
++
++if [ -n "$MACOSDEV" ] ; then
++    MACOS="macos=${MACOSDEV}\n"
++fi
++
++if [ -n "$DARWINDEV" ] ; then
++    DARWIN="darwin=${DARWINDEV}\n"
++fi
++
++OTHER="${MACOSX}${MACOS}${DARWIN}${BSD}"
+ 
+ ## safely create a tmp file then move it into place after we are sure
+ ## it was written.
+@@ -767,7 +928,9 @@
+     exit 1
+ fi
+ 
+-$PRINTF "${GLOBAL}${IMAGES}" > "$TMPCONF"
++printf "${GLOBAL}
++${IMAGES}
++${OTHER}" > "$TMPCONF"
+ if [ $? != 0 ] ; then
+     echo 1>&2 "$PRG: Unable to write temporary file ${TMPCONF}, aborting..."
+     exit 1

yaboot-1.3.14-baseaddr.patch

@@ -0,0 +1,28 @@
+diff --git a/Makefile b/Makefile
+index 5457dc9..ce0dc06 100644
+--- a/Makefile
++++ b/Makefile
+@@ -21,7 +21,7 @@ TEXTADDR	= 0x200000
+ MALLOCADDR	= 0x300000
+ MALLOCSIZE	= 0x100000
+ # Load kernel and ramdisk at real-base.  If there is overlap, will retry until find open space
+-KERNELADDR	= 0x00000000
++KERNELADDR	= 0x00C00000
+ 
+ # Set this to the prefix of your cross-compiler, if you have one.
+ # Else leave it empty.
+diff --git a/second/fs_of.c b/second/fs_of.c
+index 0d554c5..95c131d 100644
+--- a/second/fs_of.c
++++ b/second/fs_of.c
+@@ -44,8 +44,8 @@
+ #include "errors.h"
+ #include "debug.h"
+ 
+-#define LOAD_BUFFER_POS		0x00000000
+-#define LOAD_BUFFER_SIZE	0x01000000
++#define LOAD_BUFFER_POS		0x1000000
++#define LOAD_BUFFER_SIZE	0x1000000
+ 
+ static int of_open(struct boot_file_t* file, const char* dev_name,
+ 		   struct partition_t* part, const char* file_name);

yaboot-1.3.14-bigger-max-token.patch

@@ -0,0 +1,12 @@
+diff -up yaboot-1.3.14/second/cfg.c.bigger-max-token yaboot-1.3.14/second/cfg.c
+--- yaboot-1.3.14/second/cfg.c.bigger-max-token	2008-11-12 14:39:11.000000000 -0500
++++ yaboot-1.3.14/second/cfg.c	2008-11-12 14:39:17.000000000 -0500
+@@ -41,7 +41,7 @@ typedef struct {
+      void *data;
+ } CONFIG;
+ 
+-#define MAX_TOKEN 200
++#define MAX_TOKEN 511
+ #define MAX_VAR_NAME MAX_TOKEN
+ #define EOF -1
+ 

yaboot-1.3.14-fix-bootonce-nvram.patch

@@ -0,0 +1,21 @@
+diff -up yaboot-1.3.14/ybin/ybin.fix-bootonce-nvram yaboot-1.3.14/ybin/ybin
+--- yaboot-1.3.14/ybin/ybin.fix-bootonce-nvram	2008-11-12 14:51:28.000000000 -0500
++++ yaboot-1.3.14/ybin/ybin	2008-11-13 12:15:21.000000000 -0500
+@@ -1689,14 +1689,15 @@ checkconf || exit 1
+ 
+ if [ "x$bootonce" != "x" ]; then
+     foundlabel=`sed s/\#.*// $bootconf | grep "label=$bootonce$" | wc -l`
+-    if [ "$nonvram" = 0 ]; then
++    if [ "$nonvram" = 1 ]; then
+ 	echo 1>&2 "$PRG: --bootonce specified, but nvsetenv not available."
+ 	exit 1
+     fi
+     if [ "$foundlabel" = 1 ]; then
+ 	nvsetenv boot-once "$bootonce"
+ 	foundlabel=`nvsetenv boot-once`
+-	if [ "$foundlabel" != "boot-once=$bootonce" ]; then
++	if [ "$foundlabel" != "boot-once=$bootonce" -a \
++             "$foundlabel" != "$bootonce" ]; then
+ 	    echo 1>&2 "$PRG: Could not nvsetenv boot-once $bootonce"
+ 	    exit 1
+ 	fi

yaboot-1.3.14-no-birecs.patch

@@ -0,0 +1,11 @@
+--- yaboot-1.3.14/second/yaboot.c~	2009-06-07 08:57:58.000000000 +0100
++++ yaboot-1.3.14/second/yaboot.c	2009-06-07 09:02:03.000000000 +0100
+@@ -1243,7 +1243,7 @@ yaboot_text_ui(void)
+ 	  flush_icache_range ((long)loadinfo.base, (long)loadinfo.base+loadinfo.memsize);
+ 	  DEBUG_F(" done\n");
+ 
+-	  if (flat_vmlinux) {
++	  if (0 && flat_vmlinux) {
+ 	       /*
+ 	        * Fill new boot infos (only if booting a vmlinux).
+ 	        *

yaboot-1.3.3-man.patch

@@ -0,0 +1,132 @@
+diff -urN -X CVS man/mkofboot.8 man.deb/mkofboot.8
+--- man/mkofboot.8	Thu May 24 04:32:54 2001
++++ man.deb/mkofboot.8	Tue Sep 25 05:38:42 2001
+@@ -94,7 +94,7 @@
+ .TP
+ .BR \-i ,\  \-\-install\ \fIboot-file
+ Use \fIboot-file\fR as the primary boot loader executable, instead of
+-the default\fI/usr/local/lib/yaboot/yaboot\fR(8).
++the default\fI/usr/lib/yaboot/yaboot\fR(8).
+ .TP
+ .BR \-C ,\  \-\-config\ \fIconfig-file
+ Use \fIconfig-file\fR as the \fBmkofboot\fR/\fByaboot\fR(8) configuration
+@@ -200,8 +200,8 @@
+ Print out the version number and exit.
+ .SH FILES
+ .nf
+-/usr/local/lib/yaboot/yaboot \- boot loader executable
+-/usr/local/lib/yaboot/ofboot \- OpenFirmware boot script
++/usr/lib/yaboot/yaboot \- boot loader executable
++/usr/lib/yaboot/ofboot \- OpenFirmware boot script
+ /etc/yaboot.conf \- boot loader/mkofboot configuration file
+ .fi
+ .SH ENVIRONMENT
+@@ -218,7 +218,7 @@
+ program otherwise \fBmkofboot\fR will be vulnerable to race conditions.
+ The Debian mktemp is derived from OpenBSD and thus should be secure.
+ 
+-\fI/usr/local/lib/yaboot/ofboot\fR now contains code executed by /bin/sh (by
++\fI/usr/lib/yaboot/ofboot\fR now contains code executed by /bin/sh (by
+ \fBmkofboot\fR) it is thus critical that it not be writable by anyone
+ but root.  It is also critical that \fI/etc/yaboot.conf\fR not be
+ writable by anyone but root since a different \fIofboot\fR script could be
+diff -urN -X CVS man/yaboot.conf.5 man.deb/yaboot.conf.5
+--- man/yaboot.conf.5	Tue Sep 25 05:20:03 2001
++++ man.deb/yaboot.conf.5	Tue Sep 25 05:38:42 2001
+@@ -136,7 +136,7 @@
+   boot=/dev/hda2
+   device=hd:
+   partition=3
+-  magicboot=/usr/local/lib/yaboot/ofboot
++  magicboot=/usr/lib/yaboot/ofboot
+   timeout=50
+   root=/dev/hda3
+   read-only
+@@ -228,7 +228,7 @@
+ magicboot script will be executed by OF automatically at boot (instead
+ of the \fBinstall\fR file.)  See man \fBbootstrap\fR(8) for more
+ information on this.  As of ybin 0.22 you should set this to
+-/usr/local/lib/yaboot/ofboot which is a autoconfiguring first stage
++/usr/lib/yaboot/ofboot which is a autoconfiguring first stage
+ loader for yaboot.  It is capable of presenting a dual boot menu for
+ GNU/Linux, MacOS and MacOSX.  If dual booting is not required or
+ configured it will simply load yaboot directly.  You must specify this
+@@ -301,7 +301,7 @@
+ When you define this option you will be presented with a simple menu at
+ bootup allowing you to hit L to boot GNU/Linux or B to boot BSD (along
+ with other choices if configured).  This will only work if you are
+-using the new \fI/usr/local/lib/yaboot/ofboot\fR script.  When this is
++using the new \fI/usr/lib/yaboot/ofboot\fR script.  When this is
+ set to a unix device node (ie \fI/dev/hda11\fR) then ybin will use the
+ \fBofpath\fR(8) utility to determine the OpenFirmware device path.
+ .TP
+@@ -310,7 +310,7 @@
+ partition.  When you define this option you will be presented with a
+ simple menu at bootup allowing you to hit L to boot GNU/Linux or M to
+ boot MacOS (along with other choices if configured).  This will only
+-work if you are using the new \fI/usr/local/lib/yaboot/ofboot\fR
++work if you are using the new \fI/usr/lib/yaboot/ofboot\fR
+ script.  When this is set to a unix device node (ie \fI/dev/hda11\fR)
+ then ybin will use the \fBofpath\fR(8) utility to determine the
+ OpenFirmware device path.
+@@ -320,7 +320,7 @@
+ When you define this option you will be presented with a simple menu
+ at bootup allowing you to hit L to boot GNU/Linux or X to boot MacOSX
+ (along with other choices if configured).  This will only work if you
+-are using the new \fI/usr/local/lib/yaboot/ofboot\fR script.  When
++are using the new \fI/usr/lib/yaboot/ofboot\fR script.  When
+ this is set to a unix device node (ie \fI/dev/hda11\fR) then ybin will
+ use the \fBofpath\fR(8) utility to determine the OpenFirmware device
+ path.
+@@ -341,7 +341,7 @@
+ When you define this option you will be presented with a simple menu
+ at bootup allowing you to hit L to boot GNU/Linux or D to boot Darwin
+ (along with other choices if configured).  This will only work if you
+-are using the new \fI/usr/local/lib/yaboot/ofboot\fR script.  When
++are using the new \fI/usr/lib/yaboot/ofboot\fR script.  When
+ this is set to a unix device node (ie \fI/dev/hda11\fR) then ybin will
+ use the \fBofpath\fR(8) utility to determine the OpenFirmware device
+ path.
+@@ -589,8 +589,8 @@
+ root=/dev/hda3
+ partition=3
+ timeout=20
+-install=/usr/local/lib/yaboot/yaboot
+-magicboot=/usr/local/lib/yaboot/ofboot
++install=/usr/lib/yaboot/yaboot
++magicboot=/usr/lib/yaboot/ofboot
+ fgcolor=black
+ bgcolor=green
+ default=Linux
+diff -urN -X CVS man/ybin.8 man.deb/ybin.8
+--- man/ybin.8	Thu May 24 04:33:16 2001
++++ man.deb/ybin.8	Tue Sep 25 05:38:42 2001
+@@ -109,7 +109,7 @@
+ .TP
+ .BR \-i ,\  \-\-install\ \fIboot-file
+ Use \fIboot-file\fR as the primary boot loader executable, instead of
+-the default \fI/usr/local/lib/yaboot/yaboot\fR.
++the default \fI/usr/lib/yaboot/yaboot\fR.
+ .TP
+ .BR \-C ,\  \-\-config\ \fIconfig-file
+ Use \fIconfig-file\fR as the \fBybin\fR/\fByaboot\fR(8) configuration
+@@ -214,8 +214,8 @@
+ Print out the version number and exit.
+ .SH FILES
+ .nf
+-/usr/local/lib/yaboot/yaboot \- boot loader executable
+-/usr/local/lib/yaboot/ofboot \- OpenFirmware boot script
++/usr/lib/yaboot/yaboot \- boot loader executable
++/usr/lib/yaboot/ofboot \- OpenFirmware boot script
+ /etc/yaboot.conf \- boot loader/ybin configuration file
+ .fi
+ .SH ENVIRONMENT
+@@ -232,7 +232,7 @@
+ program, otherwise \fBybin\fR will be vulnerable to race conditions.
+ The Debian mktemp is derived from OpenBSD and thus should be secure.
+ 
+-\fI/usr/local/lib/yaboot/ofboot\fR now contains code executed by /bin/sh (by
++\fI/usr/lib/yaboot/ofboot\fR now contains code executed by /bin/sh (by
+ \fBybin\fR). It is thus critical that it not be writable by anyone but
+ root.  It is also critical that \fI/etc/yaboot.conf\fR not be writable
+ by anyone but root since a different \fIofboot\fR script could be

yaboot-1.3.6-ofboot.patch

@@ -0,0 +1,29 @@
+--- yaboot-1.3.6/first/ofboot.orig	Thu Mar  7 04:19:09 2002
++++ yaboot-1.3.6/first/ofboot	Thu Mar  7 04:21:49 2002
+@@ -102,7 +102,7 @@
+ 	[ "$DEBUG" = 1 ] && $PRINTF 1>&2 "$PRG: DEBUG: file1: $5\n"
+ 	[ "$COUNT" = "$OSNUM" ] && c="."
+ 	BTYA=": boot$1 \" Loading second stage bootstrap...\" .printf 100 ms load-base release-load-area \" ${4}${5}\" \$boot ;"
+-	MENUYA="\" Press $3 for GNU/Linux${c-,}\"(0d 0a)\" .printf"
++	MENUYA="\" Press $3 for Red Hat Linux${c-,}\"(0d 0a)\" .printf"
+ 	GETYA="      ascii $3 of \" $3 \"(0d 0a)\" .printf boot$1 endof"
+ 	shift 5
+ 	COUNT="$(($COUNT + 1))"
+@@ -315,7 +315,7 @@
+ MacRISC MacRISC3 MacRISC4
+ </COMPATIBLE>
+ <DESCRIPTION>
+-PowerPC GNU/Linux First Stage Bootstrap
++Red Hat Linux First Stage Bootstrap
+ </DESCRIPTION>
+ <BOOT-SCRIPT>
+ : .printf fb8-write drop ;
+@@ -336,7 +336,7 @@
+ $BGCOLOR to background-color
+ \" \"(0C)\" .printf
+ 
+-\" First Stage GNU/Linux Bootstrap\"(0d 0a)\" .printf
++\" First Stage Red Hat Linux Bootstrap\"(0d 0a)\" .printf
+ \"  \"(0d 0a)\" .printf
+ $MENUOPTS
+ \"  \"(0d 0a)\" .printf

yaboot-1.3.6-rh.patch

@@ -0,0 +1,94 @@
+--- yaboot-1.3.6/Makefile.rh	Fri May 17 15:08:25 2002
++++ yaboot-1.3.6/Makefile	Fri May 17 15:09:32 2002
+@@ -178,32 +178,32 @@
+ 	strip --remove-section=.comment --remove-section=.note util/addnote
+ 
+ install: all strip
+-	install -d -o root -g root -m 0755 ${ROOT}/etc/
+-	install -d -o root -g root -m 0755 ${ROOT}/${PREFIX}/sbin/
+-	install -d -o root -g root -m 0755 ${ROOT}/${PREFIX}/lib
+-	install -d -o root -g root -m 0755 ${ROOT}/${PREFIX}/lib/yaboot
+-	install -d -o root -g root -m 0755 ${ROOT}/${PREFIX}/${MANDIR}/man5/
+-	install -d -o root -g root -m 0755 ${ROOT}/${PREFIX}/${MANDIR}/man8/
+-	install -o root -g root -m 0644 second/yaboot ${ROOT}/$(PREFIX)/lib/yaboot
+-	install -o root -g root -m 0755 util/addnote ${ROOT}/${PREFIX}/lib/yaboot/addnote
+-	install -o root -g root -m 0644 first/ofboot ${ROOT}/${PREFIX}/lib/yaboot/ofboot
+-	install -o root -g root -m 0755 ybin/ofpath ${ROOT}/${PREFIX}/sbin/ofpath
+-	install -o root -g root -m 0755 ybin/ybin ${ROOT}/${PREFIX}/sbin/ybin
+-	install -o root -g root -m 0755 ybin/yabootconfig ${ROOT}/${PREFIX}/sbin/yabootconfig
++	install -d -m 0755 ${ROOT}/etc/
++	install -d -m 0755 ${ROOT}/${PREFIX}/sbin/
++	install -d -m 0755 ${ROOT}/${PREFIX}/lib
++	install -d -m 0755 ${ROOT}/${PREFIX}/lib/yaboot
++	install -d -m 0755 ${ROOT}/${PREFIX}/${MANDIR}/man5/
++	install -d -m 0755 ${ROOT}/${PREFIX}/${MANDIR}/man8/
++	install -m 0644 second/yaboot ${ROOT}/$(PREFIX)/lib/yaboot
++	install -m 0755 util/addnote ${ROOT}/${PREFIX}/lib/yaboot/addnote
++	install -m 0644 first/ofboot ${ROOT}/${PREFIX}/lib/yaboot/ofboot
++	install -m 0755 ybin/ofpath ${ROOT}/${PREFIX}/sbin/ofpath
++	install -m 0755 ybin/ybin ${ROOT}/${PREFIX}/sbin/ybin
++	install -m 0755 ybin/yabootconfig ${ROOT}/${PREFIX}/sbin/yabootconfig
+ 	rm -f ${ROOT}/${PREFIX}/sbin/mkofboot
+ 	ln -s ybin ${ROOT}/${PREFIX}/sbin/mkofboot
+ 	@gzip -9 man/*.[58]
+-	install -o root -g root -m 0644 man/bootstrap.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/bootstrap.8.gz
+-	install -o root -g root -m 0644 man/mkofboot.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/mkofboot.8.gz
+-	install -o root -g root -m 0644 man/ofpath.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/ofpath.8.gz
+-	install -o root -g root -m 0644 man/yaboot.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/yaboot.8.gz
+-	install -o root -g root -m 0644 man/yabootconfig.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/yabootconfig.8.gz
+-	install -o root -g root -m 0644 man/ybin.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/ybin.8.gz
+-	install -o root -g root -m 0644 man/yaboot.conf.5.gz ${ROOT}/${PREFIX}/${MANDIR}/man5/yaboot.conf.5.gz
++	install -m 0644 man/bootstrap.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/bootstrap.8.gz
++	install -m 0644 man/mkofboot.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/mkofboot.8.gz
++	install -m 0644 man/ofpath.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/ofpath.8.gz
++	install -m 0644 man/yaboot.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/yaboot.8.gz
++	install -m 0644 man/yabootconfig.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/yabootconfig.8.gz
++	install -m 0644 man/ybin.8.gz ${ROOT}/${PREFIX}/${MANDIR}/man8/ybin.8.gz
++	install -m 0644 man/yaboot.conf.5.gz ${ROOT}/${PREFIX}/${MANDIR}/man5/yaboot.conf.5.gz
+ 	@gunzip man/*.gz
+ 	@if [ ! -e ${ROOT}/etc/yaboot.conf ] ; then						\
+-		echo "install -o root -g root -m 0644 etc/yaboot.conf ${ROOT}/etc/yaboot.conf"; \
+-		install -o root -g root -m 0644 etc/yaboot.conf ${ROOT}/etc/yaboot.conf;	\
++		echo "install -m 0644 etc/yaboot.conf ${ROOT}/etc/yaboot.conf"; \
++		install -m 0644 etc/yaboot.conf ${ROOT}/etc/yaboot.conf;	\
+ 	 else											\
+ 		echo "/etc/yaboot.conf already exists, leaving it alone";			\
+ 	 fi
+--- yaboot-1.3.6/etc/yaboot.conf.fhs	Thu May 23 15:56:11 2002
++++ yaboot-1.3.6/etc/yaboot.conf	Thu May 23 15:57:29 2002
+@@ -10,7 +10,7 @@
+ ## specify a partition number for this!  On IBM hardware you can
+ ## generally comment this out.
+ 
+-device=hd:
++## device=hd:
+ 
+ ## partition is the partition number where the kernel images are
+ ## located.  The kernel images should be on your root filesystem, so
+@@ -20,7 +20,7 @@
+ ## option can be either set globally as shown here, or per image in
+ ## the image= sections
+ 
+-partition=3
++partition=2
+ 
+ ## delay is the amount of time in seconds the dual boot menu (if one
+ ## is configured, by the presense of macos, macosx, etc options here)
+@@ -35,13 +35,13 @@
+ ## section in this config file or the value of default=).
+ 
+ timeout=40
+-install=/usr/local/lib/yaboot/yaboot
+-magicboot=/usr/local/lib/yaboot/ofboot
++install=/usr/lib/yaboot/yaboot
++magicboot=/usr/lib/yaboot/ofboot
+ 
+ ## Change the default colors, fgcolor is the text color, bgcolor is
+ ## the screen background color. (default: fgcolor=white, bgcolor=black)
+-#fgcolor=black
+-#bgcolor=green
++fgcolor=white
++bgcolor=black
+ 
+ ## Password supplied in plaintext, required for yaboot to boot, unless
+ ## restricted is also present (see below). Be sure to

yaboot-ppc64.patch

@@ -0,0 +1,22 @@
+--- yaboot-1.3.13/Makefile.ppc64	2005-09-14 20:01:12.920430616 -0400
++++ yaboot-1.3.13/Makefile	2005-09-14 20:01:21.090385992 -0400
+@@ -36,8 +36,8 @@
+ 
+ # The flags for the yaboot binary.
+ #
+-YBCFLAGS = -Os $(CFLAGS) -nostdinc -Wall -isystem `$(CC) -m32 -print-file-name=include` -fsigned-char
+-YBCFLAGS += -DVERSION=\"${VERSION}${VERSIONEXTRA}\"	#"
++YBCFLAGS = -Os $(CFLAGS) -m32 -nostdinc -Wall -isystem `$(CC) -m32 -print-file-name=include` -fsigned-char
++YBCFLAGS += -DVERSION="\"${VERSION}${VERSIONEXTRA}\""	#"
+ YBCFLAGS += -DTEXTADDR=$(TEXTADDR) -DDEBUG=$(DEBUG)
+ YBCFLAGS += -DMALLOCADDR=$(MALLOCADDR) -DMALLOCSIZE=$(MALLOCSIZE)
+ YBCFLAGS += -DKERNELADDR=$(KERNELADDR)
+@@ -66,7 +66,7 @@
+ 
+ # Link flags
+ #
+-LFLAGS = -Ttext $(TEXTADDR) -Bstatic -melf32ppclinux
++LFLAGS = -Ttext $(TEXTADDR) -Bstatic 
+
+ # Libraries
+ #

yaboot-relocatable-kernel.patch

@@ -0,0 +1,21 @@
+PPC64 relocatable kernels (built with CONFIG_RELOCATABLE=y) have the type of
+ET_DYN. But yaboot code won't load the kernel if the ELF type is not
+ET_EXEC. Attached patch adds support to yaboot to load relocatable kernels
+also (ie load ET_DYN type also)
+
+Signed-off-by: M. Mohan Kumar <mohan at in.ibm.com>
+---
+ second/yaboot.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- yaboot-1.3.14.orig/second/yaboot.c
++++ yaboot-1.3.14/second/yaboot.c
+@@ -1606,7 +1606,7 @@ is_elf64(loadinfo_t *loadinfo)
+ 	     e->e_ident[EI_MAG3]  == ELFMAG3	    &&
+ 	     e->e_ident[EI_CLASS] == ELFCLASS64  &&
+ 	     e->e_ident[EI_DATA]  == ELFDATA2MSB &&
+-	     e->e_type            == ET_EXEC	    &&
++	     (e->e_type == ET_EXEC || e->e_type == ET_DYN) &&
+ 	     e->e_machine         == EM_PPC64);
+ }
+ 

yaboot.spec

@@ -0,0 +1,348 @@
+Summary: Linux bootloader for Power Macintosh "New World" computers.
+Name: yaboot
+Version: 1.3.14
+Release: 10%{?dist}
+License: GPLv2+
+Group: System Environment/Base
+Source: http://yaboot.ozlabs.org/releases/yaboot-%{version}.tar.gz
+Source1: efika.forth
+Patch1: yaboot-1.3.3-man.patch
+Patch2: yaboot-1.3.6-ofboot.patch
+Patch3: yaboot-1.3.6-rh.patch
+Patch4: yaboot-1.3.13-yabootconfig.patch
+Patch6: yaboot-1.3.10-proddiscover.patch
+Patch7: yaboot-1.3.10-ext3.patch
+Patch8: yaboot-1.3.10-sbindir.patch
+Patch9: yaboot-1.3.10-configfile.patch
+Patch10: yaboot-1.3.10-parted.patch
+Patch17: yaboot-1.3.13-pegasos-claim.patch
+Patch18: yaboot-1.3.13-pegasos-ext2.patch
+Patch21: yaboot-1.3.13-pegasos-serial.patch
+Patch22: yaboot-1.3.13-allow-deep-mntpoint.patch
+Patch27: yaboot-ppc64.patch
+Patch28: yaboot-1.3.13-dontwritehome.patch
+Patch29: yaboot-1.3.14-baseaddr.patch
+Patch30: yaboot-1.3.14-fix-bootonce-nvram.patch 
+Patch31: yaboot-1.3.14-bigger-max-token.patch
+Patch32: yaboot-relocatable-kernel.patch
+Patch33: yaboot-1.3.14-no-birecs.patch
+
+URL: http://yaboot.ozlabs.org/
+BuildRoot: %{_tmppath}/%{name}-root
+Obsoletes: ybin
+ExclusiveArch: ppc
+Requires: hfsutils
+BuildRequires: e2fsprogs-devel
+
+%description
+yaboot is a bootloader for PowerPC machines which works on New World ROM
+machines (Rev. A iMac and newer) and runs directly from Open Firmware,
+eliminating the need for Mac OS.
+yaboot can also bootload IBM pSeries machines.
+
+%prep
+%setup -q
+%patch1 -p0 -b .man
+%patch2 -p1 -b .ofboot
+%patch3 -p1 -b .rh
+%patch4 -p1 -b .yabootconfig
+%patch6 -p1 -b .proddisc
+%patch7 -p1 -b .ext3
+%patch8 -p1 -b .sbin
+%patch9 -p1 -b .config
+%patch10 -p1 -b .parted
+%patch17 -p1 -b .pegasos
+%patch18 -p1 -b .ext2
+%patch21 -p1 -b .pegasos-serial
+%patch22 -p1 -b .deepmnt
+%patch27 -p1 -b .ppc64
+%patch28 -p1 -b .bootwrite
+%patch29 -p1 -b .baseaddr
+%patch30 -p1 -b .bootonce
+%patch31 -p1 -b .maxtoken
+%patch32 -p1 -b .relocatable
+%patch33 -p1 -b .nobirecs
+
+%build
+make VERSIONEXTRA='\ (Red Hat %version-%release)'
+
+%install
+%makeinstall ROOT=$RPM_BUILD_ROOT PREFIX=%{_prefix} MANDIR=share/man SBINDIR=/sbin
+rm -f $RPM_BUILD_ROOT/etc/yaboot.conf
+touch $RPM_BUILD_ROOT/etc/yaboot.conf
+mkdir -p $RPM_BUILD_ROOT/boot
+install -m0644 %{SOURCE1} $RPM_BUILD_ROOT/boot/efika.forth
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc COPYING README* doc/*
+/boot/efika.forth
+/sbin/ofpath
+/sbin/ybin
+/sbin/yabootconfig
+/sbin/mkofboot
+/usr/lib/yaboot/addnote
+/usr/lib/yaboot/ofboot
+/usr/lib/yaboot/yaboot
+%{_mandir}/man8/bootstrap.8.gz
+%{_mandir}/man8/mkofboot.8.gz
+%{_mandir}/man8/ofpath.8.gz
+%{_mandir}/man8/yaboot.8.gz
+%{_mandir}/man8/yabootconfig.8.gz
+%{_mandir}/man8/ybin.8.gz
+%{_mandir}/man5/yaboot.conf.5.gz
+%ghost %config(noreplace) %{_sysconfdir}/yaboot.conf
+
+%changelog
+* Tue Aug 11 2009 tony@bakeyournoodle.com - 1.3.14-10
+- Backported the "no birecs" patch from F-11, rawhide.  See below for details:
+  https://www.redhat.com/archives/fedora-kernel-list/2009-June/msg00002.html
+  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-August/074571.html
+
+* Thu Jan 29 2009 Roman Rakus <rrakus@redhat.com> - 1.3.14-9
+- Add patch to handle relocatable kernels
+  Resolves: #483041
+
+* Fri Nov 21 2008 David Woodhouse <David.Woodhouse@intel.com> - 1.3.14-8
+- Fix 'ybin --bootonce' (#471425)
+- Fix maximum token length, to fix preupgrade (#471321)
+
+* Wed Nov 05 2008 Roman Rakus <rrakus@redhat.com> - 1.3.14-6
+- Changed kernel load base address
+  Resolves: #468492
+
+* Mon Aug 11 2008 Roman Rakus <rrakus@redhat.com> - 1.3.14-5
+- Clearing in specfile
+- Fixed patches for --fuzz=0
+
+* Wed May 28 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.3.14-4
+- fix license tag
+
+* Wed Apr 16 2008 Roman Rakus <rrakus@redhat.com> - 1.3.14-3
+- Upstream 1.3.14
+
+* Thu Mar 27 2008 David Woodhouse <dwmw2@redhat.com> - 1.3.13-11
+- Correct off-by-one error in Amiga partition numbers
+
+* Thu Mar 27 2008 David Woodhouse <dwmw2@redhat.com> - 1.3.13-10
+- Don't increment partition number to work around bplan firmware 
+  brokenness when the config file was specified on the command line
+
+* Fri Feb 08 2008 David Cantrell <dcantrell@redhat.com> - 1.3.13-9
+- Rebuild for gcc-4.3
+
+* Wed Nov 28 2007 David Woodhouse <dwmw2@redhat.com> - 1.3.13-8
+- Correct default config file location on Efika
+- Disable new USB bindings in efika.forth for now
+
+* Tue Nov 27 2007 David Woodhouse <dwmw2@redhat.com> - 1.3.13-7
+- Add efika.forth for fixing up Efika device-tree
+
+* Tue Nov 27 2007 David Woodhouse <dwmw2@redhat.com> - 1.3.13-6
+- Detect broken bplan firmware and don't add ":0" to block device names
+
+* Tue Aug 21 2007 David Cantrell <dcantrell@redhat.com> - 1.3.13-5
+- Rebuild
+
+* Thu Nov 16 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-4
+- Add support for usb/firewire from Alex Kanavin (#208768)
+
+* Thu Nov 09 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-3
+- Apply addnote patch (#184714)
+
+* Wed Aug 23 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-2
+- Fix ybin with SELinux (#201414)
+
+* Mon Aug 21 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-1
+- Fix multi disk G5 patch for all cases
+
+* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.3.13-0.18.1
+- rebuild
+
+* Tue Feb 21 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.18
+- Drop telnet console patch for now (#182180)
+
+* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.3.13-0.17.1
+- bump again for double-long bug on ppc(64)
+
+* Thu Feb 09 2006 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.17
+- Fix ofpath for multi-disk G5 (#180182)
+
+* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.3.13-0.16.2
+- rebuilt for new gcc4.1 snapshot and glibc changes
+
+* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
+- rebuilt
+
+* Wed Sep 14 2005 Jeremy Katz <katzj@redhat.com> - 1.3.13-0.16
+- fix paths
+
+* Wed Sep 14 2005 Jeremy Katz <katzj@redhat.com> - 1.3.13-0.15
+- fix build on ppc64
+
+* Wed Sep 14 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.14
+- New netboot patch handling device=alias: for non network case
+
+* Tue Sep 13 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.13
+- Print version-release of yaboot
+
+* Mon Sep 12 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.12
+- reworking of netboot patch (Nathan Lynch)
+
+* Sat Aug 20 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.11
+- drop netboot patch as mac cds fail to load yaboot.conf
+
+* Wed Aug 17 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.10
+- No colours on unsupported consoles (eg telnet)
+- Improved pSeries netbooting (Nathan Lynch)
+
+* Sun Aug 14 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.9
+- Try harder to allocate malloc region
+
+* Thu Aug 11 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.8
+- Allow mntpoint to be more than one directory into the partition 
+  as long as magicboot and nvram are not being used.
+
+* Thu Aug 11 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.7
+- Fix error in swraid2 patch -- don't dereference NULL pointer.
+
+* Tue Aug  9 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.6
+- Fix handling of prom 'read' method, to make Pegasos serial work
+
+* Tue Aug  9 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.5
+- Fix Pegasos partition hack
+
+* Tue Aug  9 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.4
+- Make default boot after timeout work again
+- Pegasos disagrees about partition numbering
+
+* Sat Jul 30 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.3
+- Accept config file path on command line
+- Make ofpath work on Pegasos
+
+* Fri Jul 29 2005 David Woodhouse <dwmw2@redhat.com> - 1.3.13-0.2
+- Workaround claim bug in Pegasos SmartFirmware
+- Handle ext2 boot partition
+
+* Fri Jul 22 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.13-0.1
+- Upstream 1.3.13
+- Add patches on yaboot-1.3.x tree
+- Try dropping ppc64 initrd patch
+
+* Tue Mar 15 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.12-9
+- GCC 4 rebuild
+
+* Wed Feb 02 2005 Paul Nasrat <pnasrat@redhat.com> - 1.3.12-8
+- addnote support for IBM,RPA-Client-Config note (#145739)
+- Patch to recognise l-lan as a network device
+
+* Wed Jul 28 2004 Paul Nasrat <pnasrat@redhat.com> - 1.3.12-7
+- Add yaboot.conf as ghost
+
+* Sat Jul 10 2004 Paul Nasrat <pnasrat@redhat.com> - 1.3.12-6
+- Rebuild
+
+* Sat Jul 10 2004 Paul Nasrat <pnasrat@redhat.com> - 1.3.12-5
+- Added hfsutils requires for pmac
+
+* Wed Jun 23 2004 David Woodhouse <dwmw2@redhat.com> - 1.3.12-4
+- Increase TFTP load buffer size to 8MiB.
+
+* Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 1.3.12-3
+- s/Copyright/License/
+- fix build with gcc 3.4
+
+* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Mon May 24 2004 Paul Nasrat <pnasrat@redhat.com> 1.3.12-1
+- update to 1.3.12
+
+* Tue Apr 20 2004 David Woodhouse <dwmw2@redhat.com> 1.3.10-10
+- make yabootconfig use parted if available
+
+* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Fri Aug 22 2003 Elliot Lee <sopwith@redhat.com> 1.3.10-8
+- Build for rawhide
+
+* Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-7
+- allow passing configfile name to yabootconfig with -C
+
+* Wed Jun 18 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-6
+- don't ship (invalid) default yaboot.conf
+- update to newer version of ppc64 initrd patch
+
+* Mon Apr 28 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-5
+- clean up how yabootconfig adds stuff, do some rediff'ing
+- install ybin, etc in /sbin instead of /usr/sbin (#83229)
+
+* Wed Apr 23 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-4
+- make sure there's a newline at the end of yaboot.conf generated by 
+  yabootconfig
+
+* Wed Apr  9 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-3
+- try to read product name from /etc/redhat-release instead of hard coding
+- add patch (from silo) to allow mounting dirty fs's instead of mounting 
+  read-write
+
+* Thu Apr  3 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-2
+- add patch from Peter Bergner <bergner@vnet.ibm.com> to add support for 
+  ppc64 initrds (warning: breaks ppc32 initrds)
+
+* Thu Mar 20 2003 Jeremy Katz <katzj@redhat.com> 1.3.10-1
+- update to 1.3.10
+- fix ofboot patch to use Red Hat Linux instead of Yellow Dog Linux
+- include patch from Dan Burcaw for yabootconfig so that it can be used 
+  from the installer
+
+* Tue Jan 21 2003 Elliot Lee <sopwith@redhat.com> 1.3.8-1
+- Update to new version
+
+* Wed Dec 11 2002 Tim Powers <timp@redhat.com> 1.3.6-1b.2rh
+- rebuild
+- added ExclusiveArch
+
+* Wed Mar 06 2002 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- modify for YDL 2.2
+
+* Fri Dec 07 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- update to 1.3.6
+
+* Sat Oct 06 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- update to 1.3.4
+
+* Sun Sep 30 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- updated to yaboot 1.3.3
+
+* Tue Sep 25 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- add makefile patch
+
+* Sun Sep 23 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- update to 1.3.1
+- obsoletes ybin
+
+* Thu Aug 08 2001 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- updated to 1.2.3 per Ben H's urgent announcement
+- removed obsoleted patches
+
+* Tue Jan 16 2001 Hollis Blanchard <hollis@terrasoftsolutions.com>
+- hacked out bug preventing manual boot from yaboot prompt (may break CHRP)
+- removed ybin's man pages
+- moved to /usr/lib/yaboot for ybin, FHS compliance
+- changed permissions to 644 (can't run yaboot under Linux)
+
+* Sat Nov 18 2000 Hollis Blanchard <hollis@terrasoftsolutions.com>
+- updated to yaboot 0.9
+- added man pages from ybin
+- added sample yaboot.conf and bootscript (and README's)
+
+* Sun Feb 27 2000 Dan Burcaw <dburcaw@terrasoftsolutions.com>
+- modified for YDL
+
+* Wed Jan 18 2000 Tom Rini <trini@kernel.crashing.org>
+- created