.gitignore

@@ -0,0 +1 @@
+zcp-7.?.*.tar.gz

dead.package

@@ -1 +0,0 @@
-Package is retired

sources

@@ -0,0 +1 @@
+7a47d6cfd35c6d2963a10b1920f08577  zcp-7.1.7.tar.gz

zarafa-7.0.8-va_list.patch

@@ -0,0 +1,44 @@
+Patch by Robert Scheck <robert@fedoraproject.org> for zarafa >= 7.0.8, which works
+around the insane written C/C++ code. I am not a C/C++ developer, but you only can
+use four macros for handling va_list at all: va_start, va_arg, va_copy and va_end.
+
+As a developer you should not assume that va_list is always internally typed as an
+integer because it is case on i?86 and x86_64 for example. Architectures like ARM
+handle va_list not as an integer and thus fail during compiling like this:
+
+Trace.cpp:129:16: error: invalid operands of types 'va_list {aka __va_list}' and
+  'int' to binary 'operator!='
+Trace.cpp:142:16: error: invalid operands of types 'va_list {aka __va_list}' and
+  'int' to binary 'operator!='
+
+As it is unfortunately not safe to assume that format does not contain attributes
+while va is empty this workaround is only applied on the affected ARM architecture
+for now. The only real solution is a clean rewrite of the code that should happen
+upstream.
+
+--- zarafa-7.0.8/common/Trace.cpp		2012-06-18 18:55:29.000000000 +0200
++++ zarafa-7.0.8/common/Trace.cpp.va_list	2012-06-20 01:20:06.000000000 +0200
+@@ -126,7 +126,11 @@
+ 
+ 	len = pos + 3;
+ 
++#if defined __ARM_EABI__
++	if (format) {
++#else
+ 	if (format && va) {
++#endif
+ 		va_copy(va_lentest, va);
+ 		len += _vsnprintf(NULL, 0, format, va_lentest);
+ 		va_end(va_lentest);
+@@ -139,7 +143,11 @@
+ 
+ 	memcpy(buffer, debug, pos);
+ 
++#if defined __ARM_EABI__
++	if (format)
++#else
+ 	if (format && va)
++#endif
+ 		pos = _vsnprintf(buffer+pos, len-pos, format, va);
+ 
+ 	if(pos == -1) {

zarafa-7.0.9-rpath.patch

@@ -0,0 +1,85 @@
+Patch by Robert Scheck <robert@fedoraproject.org> for zarafa >= 7.0.9, which works
+around the broken libtool of Debian. Multilib/multiarch systems like Fedora or Red
+Hat Enterprise Linux are using /usr/lib64 for 64 bit libraries and /usr/lib is used
+for 32 bit libraries. That allows to run 32 bit software on 64 bit systems. Debian
+systems only use /usr/lib which contains only 32 or 64 bit systems depending on the
+architecture.
+
+Libtool hardcodes the runtime search path in a library (rpath), if the library that
+is used for linking is not within the default system library path. The result is,
+that if aclocal.m4/configure files are generated by a Debian system, but used on a
+Fedora or Red Hat Enterprise Linux 64 bit system for compiling, "-rpath /usr/lib64"
+makes it into the binary.
+
+Fedora and EPEL (for Red Hat Enterprise Linux) do not allow binaries with rpath, as
+the Linux dynamic linker is usually smarter than the hardcoded path.
+
+The fix for this issue is to add the optional /lib64 and /usr/lib64 directories at/
+within libtool in front of the regular /lib and /usr/lib directories at the system
+library path. These libtool information are hold in aclocal.m4, which is generated
+by running aclocal. As the content of aclocal.m4 is included into configure during
+a run of autoconf, aclocal.m4 needs to be modified within the upstream build system
+each time after a aclocal run - until Debian's libtool is fixed at Debian upstream.
+
+Applying the fix is either possible by using the first hunk of the patch (second
+hunk is runtime-only if configure file has been already generated) or by running
+the following sed command after each aclocal run within the upstream build system:
+
+  sed -e 's@\(# Append ld.so.conf contents to the search path\)@# Add ABI-specific directories to the system library path.\n  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"\n\n  \1@' \
+      -e 's@/lib /usr/lib $lt_ld_extra@$sys_lib_dlsearch_path_spec $lt_ld_extra@' -i zarafa-6.40.5/aclocal.m4
+
+More information regarding this topic can be found for example at:
+
+ - http://osdir.com/ml/bug-libtool-gnu/2009-12/msg00034.html
+ - http://lists.gnu.org/archive/html/libtool/2009-01/msg00039.html
+ - http://thread.gmane.org/gmane.comp.gnu.libtool.general/8339/focus=8345
+
+--- zarafa-7.0.9/aclocal.m4			2012-08-03 13:58:18.000000000 +0200
++++ zarafa-7.0.9/aclocal.m4.rpath		2012-08-12 22:57:31.000000000 +0200
+@@ -2485,10 +2485,13 @@
+   # before this can be enabled.
+   hardcode_into_libs=yes
+ 
++  # Add ABI-specific directories to the system library path.
++  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
++
+   # Append ld.so.conf contents to the search path
+   if test -f /etc/ld.so.conf; then
+     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+   fi
+ 
+   # We used to test for /lib/ld.so.1 and disable shared libraries on
+--- zarafa-7.0.9/configure			2012-08-03 13:58:18.000000000 +0200
++++ zarafa-7.0.9/configure.rpath		2012-08-12 22:59:05.000000000 +0200
+@@ -10097,10 +10097,13 @@
+   # before this can be enabled.
+   hardcode_into_libs=yes
+ 
++  # Add ABI-specific directories to the system library path.
++  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
++
+   # Append ld.so.conf contents to the search path
+   if test -f /etc/ld.so.conf; then
+     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+   fi
+ 
+   # We used to test for /lib/ld.so.1 and disable shared libraries on
+@@ -15288,10 +15291,13 @@
+   # before this can be enabled.
+   hardcode_into_libs=yes
+ 
++  # Add ABI-specific directories to the system library path.
++  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
++
+   # Append ld.so.conf contents to the search path
+   if test -f /etc/ld.so.conf; then
+     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+   fi
+ 
+   # We used to test for /lib/ld.so.1 and disable shared libraries on

zarafa-7.1.4-swig20.patch

@@ -0,0 +1,22 @@
+Patch by Sander Hoentjen <sander@hoentjen.eu> for zarafa >= 7.1.4, which ensures
+building with swig 2.0.x by using PyInt_FromLong instead of SWIG_From_long.
+
+--- zarafa-7.1.4/swig/icalmapi.i		2013-02-28 16:13:24.000000000 +0100
++++ zarafa-7.1.4/swig/icalmapi.i.swig20		2013-03-23 23:22:08.000000000 +0100
+@@ -24,14 +24,14 @@
+ 	$1 = &temp;
+ }
+ %typemap(argout) (eIcalType* ) {
+-	%append_output(SWIG_From_long(*$1));
++	%append_output(PyInt_FromLong(*$1));
+ }
+ 
+ %typemap(in,numinputs=0) (time_t *) (time_t temp) {
+ 	$1 = &temp;
+ }
+ %typemap(argout) (time_t* ) {
+-	%append_output(SWIG_From_long(*$1));
++	%append_output(PyInt_FromLong(*$1));
+ }
+ 
+ %typemap(in,numinputs=0) (SBinary *) (SBinary temp) {

zarafa-webaccess.conf

@@ -0,0 +1,48 @@
+#
+# Zarafa Webaccess featuring a 'Look & Feel' similar to Outlook
+#
+
+Alias /webaccess /usr/share/zarafa-webaccess/
+
+# Following Apache and PHP settings need to be set to work correct
+#
+<Directory /usr/share/zarafa-webaccess/>
+    # Some apache settings
+    DirectoryIndex index.php
+    Options -Indexes +FollowSymLinks
+
+    <IfModule mod_authz_core.c>
+        # Apache 2.4
+        Require all granted
+    </IfModule>
+    <IfModule !mod_authz_core.c>
+        # Apache 2.2
+        Order allow,deny
+        Allow from all
+    </IfModule>
+
+    # Register globals must be off
+    php_flag register_globals off
+
+    # Magic quotes must be off
+    php_flag magic_quotes_gpc off
+    php_flag magic_quotes_runtime off
+
+    # The maximum POST limit. To upload large files, this value must
+    # be larger than upload_max_filesize.
+    php_value post_max_size 31M
+    php_value upload_max_filesize 30M
+
+    # Short open tags must be on
+    php_flag short_open_tag on
+
+    # Uncomment to enhance security of WebAccess by restricting cookies
+    # to only be provided over HTTPS connections
+#    php_flag session.cookie_secure on
+#    php_flag session.cookie_httponly on
+
+    # Uncomment for debugging purposes only. Make sure Apache/PHP can
+    # write to this file or no errors will be logged!
+#    php_flag log_errors on
+#    php_value error_log /var/lib/zarafa-webaccess/error_log
+</Directory>

zarafa.ini

@@ -0,0 +1,2 @@
+; Enable Zarafa mapi extension module
+extension=mapi.so

zarafa.logrotate

@@ -0,0 +1,100 @@
+/var/log/zarafa/archiver.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/dagent.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-dagent 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/gateway.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-gateway 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/ical.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-ical 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/indexer.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-indexer 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/monitor.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-monitor 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/server.log /var/log/zarafa/audit.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-server 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}
+
+/var/log/zarafa/spooler.log {
+	weekly
+	missingok
+	rotate 52
+	compress
+	delaycompress
+	notifempty
+	postrotate
+			killall -HUP zarafa-spooler 2> /dev/null || true
+	endscript
+	create 0644 zarafa zarafa
+}