Retire

This should finally ensure that the fedora-toolbox image doesn't have
any package that had its content, such as documentation or translations,
stripped out by the fedora base image.

Until now, missing-docs had a hand-maintained list of packages that had
their content stripped out by the fedora base image.  These packages are
reinstalled when building the fedora-toolbox image to restore the lost
content.  Unfortunately, this list was incomplete because it was only
updated when someone noticed that something is missing.

Now, the list is generated with:
  $ rpm --all --query --state --queryformat "PACKAGE: %{NAME}\n"

... to ensure that it's always complete.

The existing built-in test to ensure that the desired files are actually
present in the final image was extended to cover some of those that were
absent.  A new built-in test, based on the above rpm(1) command, was
added as a fallback to ensure that the final image doesn't have any
package with missing content.

As suggested by Brian Campbell.

Note that the fedora-toolbox OCI image for Fedora 39 onwards is no
longer built using OpenShift Build Service from the Dockerfile here.
It's now being built using Image Factory from fedora-kickstarts and
pungi-fedora [1], as part of the ToolbxReleaseBlocker Change [2] for
Fedora 39.

Hence this is only for the sake of completeness.

[1] https://pagure.io/fedora-kickstarts/
    https://pagure.io/pungi-fedora/

[2] https://fedoraproject.org/wiki/Changes/ToolbxReleaseBlocker

https://github.com/containers/toolbox/issues/603

Dockerfile

@@ -1,26 +0,0 @@
-FROM registry.fedoraproject.org/fedora:37
-
-ENV NAME=fedora-toolbox VERSION=37
-LABEL com.github.containers.toolbox="true" \
-      com.github.debarshiray.toolbox="true" \
-      com.redhat.component="$NAME" \
-      name="$NAME" \
-      version="$VERSION" \
-      usage="This image is meant to be used with the toolbox command" \
-      summary="Base image for creating Fedora toolbox containers" \
-      maintainer="Debarshi Ray <rishi@fedoraproject.org>"
-
-COPY README.md /
-
-RUN sed -i '/tsflags=nodocs/d' /etc/dnf/dnf.conf
-RUN dnf -y swap coreutils-single coreutils-full
-
-COPY missing-docs /
-RUN dnf -y reinstall $(<missing-docs)
-RUN rm /missing-docs
-
-COPY extra-packages /
-RUN dnf -y install $(<extra-packages)
-RUN rm /extra-packages
-
-RUN dnf clean all

README.md

@@ -1,158 +0,0 @@
-[Toolbox](https://github.com/containers/toolbox) is a tool for Linux operating
-systems, which allows the use of containerized command line environments. It is
-built on top of [Podman](https://podman.io/) and other standard container
-technologies from [OCI](https://opencontainers.org/).
-
-This is particularly useful on
-[OSTree](https://ostree.readthedocs.io/en/latest/) based operating systems like
-[Fedora CoreOS](https://coreos.fedoraproject.org/) and
-[Silverblue](https://silverblue.fedoraproject.org/). The intention of these
-systems is to discourage installation of software on the host, and instead
-install software as (or in) containers — they mostly don't even have package
-managers like DNF or YUM. This makes it difficult to set up a development
-environment or install tools for debugging in the usual way.
-
-Toolbox solves this problem by providing a fully mutable container within
-which one can install their favourite development and debugging tools, editors
-and SDKs. For example, it's possible to do `yum install ansible` without
-affecting the base operating system.
-
-However, this tool doesn't *require* using an OSTree based system. It works
-equally well on Fedora Workstation and Server, and that's a useful way to
-incrementally adopt containerization.
-
-The toolbox environment is based on an [OCI](https://www.opencontainers.org/)
-image. On Fedora this is the `fedora-toolbox` image. This image is used to
-create a toolbox container that seamlessly integrates with the rest of the
-operating system by providing access to the user's home directory, the Wayland
-and X11 sockets, networking (including Avahi), removable devices (like USB
-sticks), systemd journal, SSH agent, D-Bus, ulimits, /dev and the udev
-database, etc..
-
-
-## Installation
-
-Toolbox is installed by default on Fedora Silverblue. On other operating
-systems it's just a matter of installing the `toolbox` package.
-
-## Usage
-
-### Create your toolbox container:
-```console
-[user@hostname ~]$ toolbox create
-Created container: fedora-toolbox-33
-Enter with: toolbox enter
-[user@hostname ~]$
-```
-This will create a container called `fedora-toolbox-<version-id>`.
-
-### Enter the toolbox:
-```console
-[user@hostname ~]$ toolbox enter
-⬢[user@toolbox ~]$
-```
-
-### Remove a toolbox container:
-```console
-[user@hostname ~]$ toolbox rm fedora-toolbox-33
-[user@hostname ~]$
-```
-
-## Dependencies and Building
-
-Toolbox requires at least Podman 1.4.0 to work, and uses the Meson build
-system.
-
-The following dependencies are required to build it:
-- meson
-- go-md2man
-- systemd
-- go
-- ninja
-
-The following dependencies enable various optional features:
-- bash-completion
-
-It can be built and installed as any other typical Meson-based project:
-```console
-[user@hostname toolbox]$ meson -Dprofile_dir=/etc/profile.d builddir
-[user@hostname toolbox]$ ninja -C builddir
-[user@hostname toolbox]$ sudo ninja -C builddir install
-```
-
-Toolbox is written in Go. Consult the
-[src/go.mod](https://github.com/containers/toolbox/blob/main/src/go.mod) file
-for a full list of all the Go dependencies.
-
-By default, Toolbox uses Go modules and all the required Go packages are
-automatically downloaded as part of the build. There's no need to worry about
-the Go dependencies, unless the build environment doesn't have network access
-or any such peculiarities.
-
-## Distro support
-
-By default, Toolbox creates the container using an
-[OCI](https://www.opencontainers.org/) image called
-`<ID>-toolbox:<VERSION-ID>`, where `<ID>` and `<VERSION-ID>` are taken from the
-host's `/usr/lib/os-release`. For example, the default image on a Fedora 33
-host would be `fedora-toolbox:33`.
-
-This default can be overridden by the `--image` option in `toolbox create`,
-but operating system distributors should provide an adequately configured
-default image to ensure a smooth user experience.
-
-## Image requirements
-
-Toolbox customizes newly created containers in a certain way. This requires
-certain tools and paths to be present and have certain characteristics inside
-the OCI image.
-
-Tools:
-* `getent(1)`
-* `id(1)`
-* `ln(1)`
-* `mkdir(1)`: for hosts where `/home` is a symbolic link to `/var/home`
-* `passwd(1)`
-* `readlink(1)`
-* `rm(1)`
-* `rmdir(1)`: for hosts where `/home` is a symbolic link to `/var/home`
-* `sleep(1)`
-* `test(1)`
-* `touch(1)`
-* `unlink(1)`
-* `useradd(8)`
-* `usermod(8)`
-
-Paths:
-* `/etc/host.conf`: optional, if present not a bind mount
-* `/etc/hosts`: optional, if present not a bind mount
-* `/etc/krb5.conf.d`: directory, not a bind mount
-* `/etc/localtime`: optional, if present not a bind mount
-* `/etc/machine-id`: optional, not a bind mount
-* `/etc/resolv.conf`: optional, if present not a bind mount
-* `/etc/timezone`: optional, if present not a bind mount
-
-Toolbox enables `sudo(8)` access inside containers. The following is necessary
-for that to work:
-
-* The image should have `sudo(8)` enabled for users belonging to either the
-  `sudo` or `wheel` groups, and the group itself should exist. File an
-  [issue](https://github.com/containers/toolbox/issues/new) if you really need
-  support for a different group. However, it's preferable to keep this list as
-  short as possible.
-
-* The image should allow empty passwords for `sudo(8)`. This can be achieved
-  by either adding the `nullok` option to the `PAM(8)` configuration, or by
-  add the `NOPASSWD` tag to the `sudoers(5)` configuration.
-
-Since Toolbox only works with OCI images that fulfill certain requirements,
-it will refuse images that aren't tagged with
-`com.github.containers.toolbox="true"` and
-`com.github.debarshiray.toolbox="true"` labels. These labels are meant to be
-used by the maintainer of the image to indicate that they have read this
-document and tested that the image works with Toolbox. You can use the
-following snippet in a Dockerfile for this:
-```Dockerfile
-LABEL com.github.containers.toolbox="true" \
-      com.github.debarshiray.toolbox="true"
-```

dead.container

@@ -0,0 +1,9 @@
+The fedora-toolbox OCI image for Fedora 39 onwards is no longer built using
+OpenShift Build Service from the Dockerfile here.  It's now being built using
+Image Factory from fedora-kickstarts and pungi-fedora [1], as part of the
+ToolbxReleaseBlocker Change [2] for Fedora 39.
+
+[1] https://pagure.io/fedora-kickstarts/
+    https://pagure.io/pungi-fedora/
+
+[2] https://fedoraproject.org/wiki/Changes/ToolbxReleaseBlocker

extra-packages

@@ -1,45 +0,0 @@
-bash-completion
-bc
-bzip2
-diffutils
-dnf-plugins-core
-findutils
-flatpak-spawn
-fpaste
-git
-gnupg
-gnupg2-smime
-gvfs-client
-hostname
-iproute
-iputils
-jwhois
-keyutils
-krb5-libs
-less
-lsof
-man-db
-man-pages
-mtr
-nano-default-editor
-nss-mdns
-openssh-clients
-passwd
-pigz
-procps-ng
-rsync
-shadow-utils
-sudo
-tcpdump
-time
-traceroute
-tree
-unzip
-util-linux
-vte-profile
-wget
-which
-words
-xorg-x11-xauth
-xz
-zip

missing-docs

@@ -1,17 +0,0 @@
-acl
-bash
-coreutils-common
-curl
-findutils
-gawk
-grep
-gzip
-libcap
-openssl
-p11-kit
-pam
-python3
-rpm
-sed
-systemd
-tar