Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

.gitignore

@@ -1,3 +1,3 @@
 /alsa-lib-1.*.tar.bz2
-/alsa-topology-conf-1.2.1.tar.bz2
-/alsa-ucm-conf-1.2.1.tar.bz2
+/alsa-topology-conf-1.*.tar.bz2
+/alsa-ucm-conf-1.*.tar.bz2

alsa-git.patch

@@ -1,773 +0,0 @@
-From c79f09e1f5e8b559b58dacdb00708d995b2e3aa5 Mon Sep 17 00:00:00 2001
-From: paulhsia <paulhsia@chromium.org>
-Date: Sat, 30 Nov 2019 03:35:30 +0800
-Subject: [PATCH 01/10] ucm: Use strncmp to avoid access-out-of-boundary
-
-If the length of the identifier is less than the length of the prefix,
-access-out-of-boundary will occur in memcmp().
-
-Signed-off-by: paulhsia <paulhsia@chromium.org>
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/ucm/main.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/src/ucm/main.c b/src/ucm/main.c
-index b0b6ffb3..252e50d9 100644
---- a/src/ucm/main.c
-+++ b/src/ucm/main.c
-@@ -61,11 +61,13 @@ static int check_identifier(const char *identifier, const char *prefix)
- {
- 	int len;
- 
--	if (strcmp(identifier, prefix) == 0)
--		return 1;
- 	len = strlen(prefix);
--	if (memcmp(identifier, prefix, len) == 0 && identifier[len] == '/')
-+	if (strncmp(identifier, prefix, len) != 0)
-+		return 0;
-+
-+	if (identifier[len] == 0 || identifier[len] == '/')
- 		return 1;
-+
- 	return 0;
- }
- 
--- 
-2.20.1
-
-
-From 9baf64da2f26844434ecea4825052937a3abe06c Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Fri, 29 Nov 2019 22:28:26 +0100
-Subject: [PATCH 02/10] ucm: return always at least NULL if no list is
- available in snd_use_case_get_list()
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/ucm/main.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/src/ucm/main.c b/src/ucm/main.c
-index 252e50d9..b80db65f 100644
---- a/src/ucm/main.c
-+++ b/src/ucm/main.c
-@@ -1160,8 +1160,10 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
- 
- 	modifier = find_modifier(uc_mgr, verb, name, 0);
- 	if (modifier) {
--		if (modifier->dev_list.type != type)
-+		if (modifier->dev_list.type != type) {
-+			*list = NULL;
- 			return 0;
-+		}
- 		return get_list(&modifier->dev_list.list, list,
- 				struct dev_list_node, list,
- 				name);
-@@ -1169,8 +1171,10 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
- 
- 	device = find_device(uc_mgr, verb, name, 0);
- 	if (device) {
--		if (device->dev_list.type != type)
-+		if (device->dev_list.type != type) {
-+			*list = NULL;
- 			return 0;
-+		}
- 		return get_list(&device->dev_list.list, list,
- 				struct dev_list_node, list,
- 				name);
--- 
-2.20.1
-
-
-From ebdd2b6cdb8119cf75f0dd0a3b283d271b3a547e Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Sat, 30 Nov 2019 20:31:55 +0100
-Subject: [PATCH 03/10] ucm: add _identifiers list
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- include/use-case.h |   1 +
- src/ucm/main.c     | 268 ++++++++++++++++++++++++++++++++++-----------
- 2 files changed, 208 insertions(+), 61 deletions(-)
-
-diff --git a/include/use-case.h b/include/use-case.h
-index 8e7e838c..85c58ac0 100644
---- a/include/use-case.h
-+++ b/include/use-case.h
-@@ -206,6 +206,7 @@ int snd_use_case_free_list(const char *list[], int items);
-  *   - _enadevs			- get list of enabled devices
-  *   - _enamods			- get list of enabled modifiers
-  *
-+ *   - _identifiers/{modifier}|{device}[/{verb}]     - list of value identifiers
-  *   - _supporteddevs/{modifier}|{device}[/{verb}]   - list of supported devices
-  *   - _conflictingdevs/{modifier}|{device}[/{verb}] - list of conflicting devices
-  *
-diff --git a/src/ucm/main.c b/src/ucm/main.c
-index b80db65f..d2078a23 100644
---- a/src/ucm/main.c
-+++ b/src/ucm/main.c
-@@ -1072,7 +1072,6 @@ int snd_use_case_mgr_reset(snd_use_case_mgr_t *uc_mgr)
- /**
-  * \brief Get list of verbs in pair verbname+comment
-  * \param list Returned list
-- * \param verbname For verb (NULL = current)
-  * \return Number of list entries if success, otherwise a negative error code
-  */
- static int get_verb_list(snd_use_case_mgr_t *uc_mgr, const char **list[])
-@@ -1181,7 +1180,6 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
- 	}
- 
- 	return -ENOENT;
--
- }
- 
- /**
-@@ -1210,41 +1208,201 @@ static int get_conflicting_device_list(snd_use_case_mgr_t *uc_mgr,
- 
- #ifndef DOC_HIDDEN
- struct myvalue {
--        struct list_head list;
--        char *value;
-+	struct list_head list;
-+	const char *text;
- };
- #endif
- 
-+/**
-+ * \brief Convert myvalue list string list
-+ * \param list myvalue list
-+ * \param res string list
-+ * \retval Number of list entries if success, otherwise a negativer error code
-+ */
-+static int myvalue_to_str_list(struct list_head *list, char ***res)
-+{
-+	struct list_head *pos;
-+	struct myvalue *value;
-+	char **p;
-+	int cnt;
-+
-+	cnt = alloc_str_list(list, 1, res);
-+	if (cnt < 0)
-+		return cnt;
-+	p = *res;
-+	list_for_each(pos, list) {
-+		value = list_entry(pos, struct myvalue, list);
-+		*p = strdup(value->text);
-+		if (*p == NULL) {
-+			snd_use_case_free_list((const char **)p, cnt);
-+			return -ENOMEM;
-+		}
-+		p++;
-+	}
-+	return cnt;
-+}
-+
-+/**
-+ * \brief Free myvalue list
-+ * \param list myvalue list
-+ */
-+static void myvalue_list_free(struct list_head *list)
-+{
-+	struct list_head *pos, *npos;
-+	struct myvalue *value;
-+
-+	list_for_each_safe(pos, npos, list) {
-+		value = list_entry(pos, struct myvalue, list);
-+		list_del(&value->list);
-+		free(value);
-+	}
-+}
-+
-+/**
-+ * \brief Merge one value to the myvalue list
-+ * \param list The list with values
-+ * \param value The value to be merged (without duplicates)
-+ * \return 1 if dup, 0 if success, otherwise a negative error code
-+ */
-+static int merge_value(struct list_head *list, const char *text)
-+{
-+	struct list_head *pos;
-+	struct myvalue *value;
-+
-+	list_for_each(pos, list) {
-+		value = list_entry(pos, struct myvalue, list);
-+		if (strcmp(value->text, text) == 0)
-+			return 1;
-+	}
-+	value = malloc(sizeof(*value));
-+	if (value == NULL)
-+		return -ENOMEM;
-+	value->text = text;
-+	list_add_tail(&value->list, list);
-+	return 0;
-+}
-+
-+/**
-+ * \brief Find all values for given identifier
-+ * \param list Returned list
-+ * \param source Source list with ucm_value structures
-+ * \return Zero if success, otherwise a negative error code
-+ */
-+static int add_identifiers(struct list_head *list,
-+			   struct list_head *source)
-+{
-+	struct ucm_value *v;
-+	struct list_head *pos;
-+	int err;
-+
-+	list_for_each(pos, source) {
-+		v = list_entry(pos, struct ucm_value, list);
-+		err = merge_value(list, v->name);
-+		if (err < 0)
-+			return err;
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * \brief Find all values for given identifier
-+ * \param list Returned list
-+ * \param identifier Identifier
-+ * \param source Source list with ucm_value structures
-+ */
- static int add_values(struct list_head *list,
-                       const char *identifier,
-                       struct list_head *source)
- {
--        struct ucm_value *v;
--        struct myvalue *val;
--        struct list_head *pos, *pos1;
--        int match;
-+	struct ucm_value *v;
-+	struct list_head *pos;
-+	int err;
-         
--        list_for_each(pos, source) {
--                v = list_entry(pos, struct ucm_value, list);
--                if (check_identifier(identifier, v->name)) {
--                        match = 0;
--                        list_for_each(pos1, list) {
--                                val = list_entry(pos1, struct myvalue, list);
--                                if (strcmp(val->value, v->data) == 0) {
--                                        match = 1;
--                                        break;
--                                }
--                        }
--                        if (!match) {
--                                val = malloc(sizeof(struct myvalue));
--                                if (val == NULL)
--                                        return -ENOMEM;
--				val->value = v->data;
--                                list_add_tail(&val->list, list);
--                        }
--                }
--        }
--        return 0;
-+	list_for_each(pos, source) {
-+		v = list_entry(pos, struct ucm_value, list);
-+		if (check_identifier(identifier, v->name)) {
-+			err = merge_value(list, v->data);
-+			if (err < 0)
-+				return err;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * \brief compare two identifiers
-+ */
-+static int identifier_cmp(const void *_a, const void *_b)
-+{
-+	const char * const *a = _a;
-+	const char * const *b = _b;
-+	return strcmp(*a, *b);
-+}
-+
-+/**
-+ * \brief Get list of available identifiers
-+ * \param list Returned list
-+ * \param name Name of verb or modifier to query
-+ * \return Number of list entries if success, otherwise a negative error code
-+ */
-+static int get_identifiers_list(snd_use_case_mgr_t *uc_mgr,
-+				const char **list[], char *name)
-+{
-+	struct use_case_verb *verb;
-+	struct use_case_modifier *modifier;
-+	struct use_case_device *device;
-+	struct list_head mylist;
-+	struct list_head *value_list;
-+	char *str, **res;
-+	int err;
-+
-+	if (!name)
-+		return -ENOENT;
-+
-+	str = strchr(name, '/');
-+	if (str) {
-+		*str = '\0';
-+		verb = find_verb(uc_mgr, str + 1);
-+	}
-+	else {
-+		verb = uc_mgr->active_verb;
-+	}
-+	if (!verb)
-+		return -ENOENT;
-+
-+	value_list = NULL;
-+	modifier = find_modifier(uc_mgr, verb, name, 0);
-+	if (modifier) {
-+		value_list = &modifier->value_list;
-+	} else {
-+		device = find_device(uc_mgr, verb, name, 0);
-+		if (device)
-+			value_list = &device->value_list;
-+	}
-+	if (value_list == NULL)
-+		return -ENOENT;
-+
-+	INIT_LIST_HEAD(&mylist);
-+	err = add_identifiers(&mylist, &uc_mgr->value_list);
-+	if (err < 0)
-+		goto __fail;
-+	err = add_identifiers(&mylist, &verb->value_list);
-+	if (err < 0)
-+		goto __fail;
-+	err = add_identifiers(&mylist, value_list);
-+	if (err < 0)
-+		goto __fail;
-+	err = myvalue_to_str_list(&mylist, &res);
-+	if (err > 0)
-+		*list = (const char **)res;
-+	else if (err == 0)
-+		*list = NULL;
-+__fail:
-+	myvalue_list_free(&mylist);
-+	if (err <= 0)
-+		return err;
-+	qsort(*list, err, sizeof(char *), identifier_cmp);
-+	return err;
- }
- 
- /**
-@@ -1258,8 +1416,7 @@ static int get_value_list(snd_use_case_mgr_t *uc_mgr,
-                           const char **list[],
-                           char *verbname)
- {
--        struct list_head mylist, *pos, *npos;
--        struct myvalue *val;
-+	struct list_head mylist, *pos;
-         struct use_case_verb *verb;
-         struct use_case_device *dev;
-         struct use_case_modifier *mod;
-@@ -1292,26 +1449,13 @@ static int get_value_list(snd_use_case_mgr_t *uc_mgr,
-                 if (err < 0)
-                         goto __fail;
-         }
--        err = alloc_str_list(&mylist, 1, &res);
--        if (err >= 0) {
-+	err = myvalue_to_str_list(&mylist, &res);
-+	if (err > 0)
- 	        *list = (const char **)res;
--                list_for_each(pos, &mylist) {
--                        val = list_entry(pos, struct myvalue, list);
--                        *res = strdup(val->value);
--                        if (*res == NULL) {
--                                snd_use_case_free_list((const char **)res, err);
--                                err = -ENOMEM;
--                                goto __fail;
--                        }
--                        res++;
--                }
--        }
-+	else if (err == 0)
-+		*list = NULL;
-       __fail:
--        list_for_each_safe(pos, npos, &mylist) {
--                val = list_entry(pos, struct myvalue, list);
--                list_del(&val->list);
--                free(val);
--        }
-+	myvalue_list_free(&mylist);
-         return err;
- }
- 
-@@ -1381,21 +1525,23 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-                 } else {
-                         str = NULL;
-                 }
--        	if (check_identifier(identifier, "_devices"))
--          		err = get_device_list(uc_mgr, list, str);
-+		if (check_identifier(identifier, "_devices"))
-+			err = get_device_list(uc_mgr, list, str);
-                 else if (check_identifier(identifier, "_modifiers"))
--                        err = get_modifier_list(uc_mgr, list, str);
--                else if (check_identifier(identifier, "_supporteddevs"))
--                        err = get_supported_device_list(uc_mgr, list, str);
--                else if (check_identifier(identifier, "_conflictingdevs"))
--                        err = get_conflicting_device_list(uc_mgr, list, str);
-+			err = get_modifier_list(uc_mgr, list, str);
-+		else if (check_identifier(identifier, "_identifiers"))
-+			err = get_identifiers_list(uc_mgr, list, str);
-+		else if (check_identifier(identifier, "_supporteddevs"))
-+			err = get_supported_device_list(uc_mgr, list, str);
-+		else if (check_identifier(identifier, "_conflictingdevs"))
-+			err = get_conflicting_device_list(uc_mgr, list, str);
- 		else if (identifier[0] == '_')
- 			err = -ENOENT;
--                else
--                        err = get_value_list(uc_mgr, identifier, list, str);
--        	if (str)
--        		free(str);
--        }
-+		else
-+			err = get_value_list(uc_mgr, identifier, list, str);
-+		if (str)
-+			free(str);
-+	}
-       __end:
- 	pthread_mutex_unlock(&uc_mgr->mutex);
- 	return err;
--- 
-2.20.1
-
-
-From 5ee5ef31b5ff3fb7c904054cb9cac7478a727f7c Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Sun, 1 Dec 2019 14:26:40 +0100
-Subject: [PATCH 04/10] namehint: correct the @args check
-
-BugLink: https://github.com/alsa-project/alsa-plugins/issues/3
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/control/namehint.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/src/control/namehint.c b/src/control/namehint.c
-index 808df6b5..4927ef97 100644
---- a/src/control/namehint.c
-+++ b/src/control/namehint.c
-@@ -348,6 +348,12 @@ static int try_config(snd_config_t *config,
- 		goto __cleanup;
- 	if (snd_config_search(res, "@args", &cfg) >= 0) {
- 		snd_config_for_each(i, next, cfg) {
-+			/* skip the argument list */
-+			snd_config_get_id(snd_config_iterator_entry(i), &str);
-+			while (*str && *str >= '0' && *str <= '9') str++;
-+			if (*str == '\0')
-+				continue;
-+			/* the argument definition must have the default */
- 			if (snd_config_search(snd_config_iterator_entry(i),
- 					      "default", NULL) < 0) {
- 				err = -EINVAL;
--- 
-2.20.1
-
-
-From 6055f8a584296abfc0cec0439ceb708f0eddcc9d Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Sun, 1 Dec 2019 14:30:54 +0100
-Subject: [PATCH 05/10] namehint: improve the previous patch (check the
- returned value)
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/control/namehint.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/src/control/namehint.c b/src/control/namehint.c
-index 4927ef97..60c48ae3 100644
---- a/src/control/namehint.c
-+++ b/src/control/namehint.c
-@@ -349,7 +349,8 @@ static int try_config(snd_config_t *config,
- 	if (snd_config_search(res, "@args", &cfg) >= 0) {
- 		snd_config_for_each(i, next, cfg) {
- 			/* skip the argument list */
--			snd_config_get_id(snd_config_iterator_entry(i), &str);
-+			if (snd_config_get_id(snd_config_iterator_entry(i), &str) < 0)
-+				continue;
- 			while (*str && *str >= '0' && *str <= '9') str++;
- 			if (*str == '\0')
- 				continue;
--- 
-2.20.1
-
-
-From 4dddcf733d56a13f4d042fefa1fb6230c09f1f65 Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Mon, 2 Dec 2019 11:56:30 +0100
-Subject: [PATCH 06/10] ucm: docs - allow spaces in device names for JackHWMute
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- include/use-case.h | 25 +++++++++++++------------
- 1 file changed, 13 insertions(+), 12 deletions(-)
-
-diff --git a/include/use-case.h b/include/use-case.h
-index 85c58ac0..e1f58027 100644
---- a/include/use-case.h
-+++ b/include/use-case.h
-@@ -326,7 +326,7 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-  *      - Valid values: "soft" (software attenuation)
-  *   - EDIDFile
-  *      - Path to EDID file for HDMI devices
-- *   - JackControl, JackDev, JackHWMute
-+ *   - JackControl, JackDev
-  *      - Jack information for a device. The jack status can be reported via
-  *        a kcontrol and/or via an input device. **JackControl** is the
-  *        kcontrol name of the jack, and **JackDev** is the input device id of
-@@ -334,17 +334,18 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-  *        JackDev value should be "foo"). UCM configuration files should
-  *        contain both JackControl and JackDev when possible, because
-  *        applications are likely to support only one or the other.
-- *
-- *        If **JackHWMute** is set, it indicates that when the jack is plugged
-- *        in, the hardware automatically mutes some other device(s). The
-- *        JackHWMute value is a space-separated list of device names (this
-- *        isn't compatible with device names with spaces in them, so don't use
-- *        such device names!). Note that JackHWMute should be used only when
-- *        the hardware enforces the automatic muting. If the hardware doesn't
-- *        enforce any muting, it may still be tempting to set JackHWMute to
-- *        trick upper software layers to e.g. automatically mute speakers when
-- *        headphones are plugged in, but that's application policy
-- *        configuration that doesn't belong to UCM configuration files.
-+ *   - JackHWMute
-+ *	  If this value is set, it indicates that when the jack is plugged
-+ *	  in, the hardware automatically mutes some other device(s). The
-+ *	  value is a space-separated list of device names. If the device
-+ *	  name contains space, it must be enclosed to ' or ", e.g.:
-+ *		JackHWMute "'Dock Headphone' Headphone"
-+ *        Note that JackHWMute should be used only when the hardware enforces
-+ *        the automatic muting. If the hardware doesn't enforce any muting, it
-+ *        may still be tempting to set JackHWMute to trick upper software layers
-+ *        to e.g. automatically mute speakers when headphones are plugged in,
-+ *        but that's application policy configuration that doesn't belong
-+ *        to UCM configuration files.
-  *   - MinBufferLevel
-  *	- This is used on platform where reported buffer level is not accurate.
-  *	  E.g. "512", which holds 512 samples in device buffer. Note: this will
--- 
-2.20.1
-
-
-From 2a286ca9a8415571181ce58027686ec332a834e9 Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Mon, 2 Dec 2019 11:57:18 +0100
-Subject: [PATCH 07/10] use-case: docs - add PlaybackMixerCopy and
- CaptureMixerCopy
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- include/use-case.h | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/include/use-case.h b/include/use-case.h
-index e1f58027..71fcc949 100644
---- a/include/use-case.h
-+++ b/include/use-case.h
-@@ -309,8 +309,14 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-  *   - PlaybackMixerElem
-  *      - mixer element playback identifier
-  *	- can be parsed using snd_use_case_parse_selem_id()
-+ *   - PlaybackMixerCopy
-+ *      - additional mixer element playback identifier
-+ *	- can be parsed using snd_use_case_parse_selem_id()
-+ *      - those elements should copy the volume and switch settings
-+ *      - element identifiers are separated using the | character
-  *   - PlaybackMasterElem
-  *      - mixer element playback identifier for the master control
-+ *	- can be parsed using snd_use_case_parse_selem_id()
-  *   - PlaybackMasterType
-  *      - type of the master volume control
-  *      - Valid values: "soft" (software attenuation)
-@@ -319,8 +325,14 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-  *   - CaptureMixerElem
-  *      - mixer element capture identifier
-  *	- can be parsed using snd_use_case_parse_selem_id()
-+ *   - CaptureMixerCopy
-+ *      - additional mixer element capture identifier
-+ *	- can be parsed using snd_use_case_parse_selem_id()
-+ *      - those elements should copy the volume and switch settings
-+ *      - element identifiers are separated using the | character
-  *   - CaptureMasterElem
-  *      - mixer element playback identifier for the master control
-+ *	- can be parsed using snd_use_case_parse_selem_id()
-  *   - CaptureMasterType
-  *      - type of the master volume control
-  *      - Valid values: "soft" (software attenuation)
--- 
-2.20.1
-
-
-From a0fc4447bb7c7f9a850a0a85f3a5a32c1509caf4 Mon Sep 17 00:00:00 2001
-From: Jaroslav Kysela <perex@perex.cz>
-Date: Tue, 3 Dec 2019 15:01:04 +0100
-Subject: [PATCH 08/10] ucm: docs - add JackCTL, rearrange JackControl and
- JackDev
-
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- include/use-case.h | 22 ++++++++++++++--------
- 1 file changed, 14 insertions(+), 8 deletions(-)
-
-diff --git a/include/use-case.h b/include/use-case.h
-index 71fcc949..25998cb9 100644
---- a/include/use-case.h
-+++ b/include/use-case.h
-@@ -338,14 +338,20 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
-  *      - Valid values: "soft" (software attenuation)
-  *   - EDIDFile
-  *      - Path to EDID file for HDMI devices
-- *   - JackControl, JackDev
-- *      - Jack information for a device. The jack status can be reported via
-- *        a kcontrol and/or via an input device. **JackControl** is the
-- *        kcontrol name of the jack, and **JackDev** is the input device id of
-- *        the jack (if the full input device path is /dev/input/by-id/foo, the
-- *        JackDev value should be "foo"). UCM configuration files should
-- *        contain both JackControl and JackDev when possible, because
-- *        applications are likely to support only one or the other.
-+ *   - JackCTL
-+ *      - jack control device name
-+ *   - JackControl
-+ *      - jack control identificator
-+ *      - can be parsed using snd_use_case_parse_ctl_elem_id()
-+ *      - UCM configuration files should contain both JackControl and JackDev
-+ *        when possible, because applications are likely to support only one
-+ *        or the other
-+ *   - JackDev
-+ *      - the input device id of the jack (if the full input device path is
-+ *        /dev/input/by-id/foo, the JackDev value should be "foo")
-+ *      - UCM configuration files should contain both JackControl and JackDev
-+ *        when possible, because applications are likely to support only one
-+ *        or the other
-  *   - JackHWMute
-  *	  If this value is set, it indicates that when the jack is plugged
-  *	  in, the hardware automatically mutes some other device(s). The
--- 
-2.20.1
-
-
-From e59034a0bec257cc7422a1e9436d936be8696a6f Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 3 Dec 2019 18:27:39 +0100
-Subject: [PATCH 09/10] ucm: Do not fail to parse configs on cards with an
- empty CardComponents lists
-
-Since the UCM profiles for all Bay- and Cherry-Trail SST cards have been
-moved over to UCM2, parsing them fails with:
-
-ALSA lib ucm_subs.c:220:(uc_mgr_get_substituted_value) variable '${CardComponents}' is not defined in this context!
-
-This completely breaks audio support on all Bay- and Cherry-Trail devices.
-
-This is caused by these non-SOF ASoC using cards having an empty
-CardComponents list. Which in itself is fine, but is rejected by
-the ucm_subs.c code. This commit changes the ucm_subs code to accept
-an empty string as a valid value for CardComponents restoring audio
-functionality on these boards.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/ucm/ucm_subs.c | 20 ++++++++++++--------
- 1 file changed, 12 insertions(+), 8 deletions(-)
-
-diff --git a/src/ucm/ucm_subs.c b/src/ucm/ucm_subs.c
-index 00afa9e3..90e395f0 100644
---- a/src/ucm/ucm_subs.c
-+++ b/src/ucm/ucm_subs.c
-@@ -25,6 +25,7 @@
-  */
- 
- #include "ucm_local.h"
-+#include <stdbool.h>
- #include <sys/stat.h>
- #include <limits.h>
- 
-@@ -145,10 +146,11 @@ static char *rval_sysfs(snd_use_case_mgr_t *uc_mgr ATTRIBUTE_UNUSED, const char
- 	return strdup(path);
- }
- 
--#define MATCH_VARIABLE(name, id, fcn)					\
-+#define MATCH_VARIABLE(name, id, fcn, empty_ok)				\
- 	if (strncmp((name), (id), sizeof(id) - 1) == 0) { 		\
- 		rval = fcn(uc_mgr);					\
- 		idsize = sizeof(id) - 1;				\
-+		allow_empty = (empty_ok);				\
- 		goto __rval;						\
- 	}
- 
-@@ -189,12 +191,14 @@ int uc_mgr_get_substituted_value(snd_use_case_mgr_t *uc_mgr,
- 
- 	while (*value) {
- 		if (*value == '$' && *(value+1) == '{') {
--			MATCH_VARIABLE(value, "${ConfName}", rval_conf_name);
--			MATCH_VARIABLE(value, "${CardId}", rval_card_id);
--			MATCH_VARIABLE(value, "${CardDriver}", rval_card_driver);
--			MATCH_VARIABLE(value, "${CardName}", rval_card_name);
--			MATCH_VARIABLE(value, "${CardLongName}", rval_card_longname);
--			MATCH_VARIABLE(value, "${CardComponents}", rval_card_components);
-+			bool allow_empty = false;
-+
-+			MATCH_VARIABLE(value, "${ConfName}", rval_conf_name, false);
-+			MATCH_VARIABLE(value, "${CardId}", rval_card_id, false);
-+			MATCH_VARIABLE(value, "${CardDriver}", rval_card_driver, false);
-+			MATCH_VARIABLE(value, "${CardName}", rval_card_name, false);
-+			MATCH_VARIABLE(value, "${CardLongName}", rval_card_longname, false);
-+			MATCH_VARIABLE(value, "${CardComponents}", rval_card_components, true);
- 			MATCH_VARIABLE2(value, "${env:", rval_env);
- 			MATCH_VARIABLE2(value, "${sys:", rval_sysfs);
- 			err = -EINVAL;
-@@ -208,7 +212,7 @@ int uc_mgr_get_substituted_value(snd_use_case_mgr_t *uc_mgr,
- 			}
- 			goto __error;
- __rval:
--			if (rval == NULL || rval[0] == '\0') {
-+			if (rval == NULL || (!allow_empty && rval[0] == '\0')) {
- 				free(rval);
- 				strncpy(r, value, idsize);
- 				r[idsize] = '\0';
--- 
-2.20.1
-
-
-From 8e2c70add782f997f7c269ed3f722888e56ff024 Mon Sep 17 00:00:00 2001
-From: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Date: Tue, 3 Dec 2019 18:56:40 +0100
-Subject: [PATCH 10/10] src/ucm/main.c: fix build without mixer
-
-Commit 4ce38a5ff466d18039b2606938f866ea3a6c9f3c breaks the build without
-mixer on:
-
-  CCLD     libasound.la
-/home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/8.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: ucm/.libs/libucm.a(main.o): in function `snd_use_case_set':
-main.c:(.text+0x185c): undefined reference to `snd_mixer_selem_id_parse'
-
-Fixes: http://autobuild.buildroot.org/results/4d91c9f82a2a61c50c457a851073b85cc09ea345
-
-Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Signed-off-by: Jaroslav Kysela <perex@perex.cz>
----
- src/ucm/main.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/src/ucm/main.c b/src/ucm/main.c
-index d2078a23..61922f10 100644
---- a/src/ucm/main.c
-+++ b/src/ucm/main.c
-@@ -2115,8 +2115,10 @@ int snd_use_case_parse_selem_id(snd_mixer_selem_id_t *dst,
- 				const char *ucm_id,
- 				const char *value)
- {
-+#ifdef BUILD_MIXER
- 	if (strcmp(ucm_id, "PlaybackMixerId") == 0 ||
- 	    strcmp(ucm_id, "CaptureMixerId") == 0)
- 		return snd_mixer_selem_id_parse(dst, value);
-+#endif
- 	return -EINVAL;
- }
--- 
-2.20.1
-

alsa-lib-1.0.14-glibc-open.patch

@@ -1,11 +0,0 @@
---- alsa-lib-1.0.14/aserver/aserver.c	2007-05-31 10:05:13.000000000 +0200
-+++ alsa-lib-1.0.14.lennart/aserver/aserver.c	2007-08-15 15:53:32.000000000 +0200
-@@ -35,6 +35,8 @@
- 
- #include "aserver.h"
- 
-+#undef open
-+
- char *command;
- 
- #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)

alsa-lib-1.2.10-glibc-open.patch

@@ -0,0 +1,10 @@
+--- alsa-lib-1.2.10/aserver/aserver.c~	2023-09-01 17:35:48.000000000 +0200
++++ alsa-lib-1.2.10/aserver/aserver.c	2023-09-01 18:13:11.339601685 +0200
+@@ -35,6 +35,7 @@
+ #include <limits.h>
+ #include <signal.h>
+ 
++#undef open
+ 
+ char *command;
+ 

alsa-lib-1.2.3.1-config.patch

@@ -1,19 +1,19 @@
 diff --git a/src/conf/alsa.conf b/src/conf/alsa.conf
-index 09980586..c4525f0b 100644
+index 18427ec6..1915af4e 100644
 --- a/src/conf/alsa.conf
 +++ b/src/conf/alsa.conf
-@@ -67,8 +67,7 @@ defaults.pcm.nonblock 1
+@@ -80,8 +80,7 @@ defaults.pcm.nonblock 1
  defaults.pcm.compat 0
  defaults.pcm.minperiodtime 5000		# in us
  defaults.pcm.ipc_key 5678293
 -defaults.pcm.ipc_gid audio
 -defaults.pcm.ipc_perm 0660
 +defaults.pcm.ipc_perm 0600
+ defaults.pcm.tstamp_type default
  defaults.pcm.dmix.max_periods 0
  defaults.pcm.dmix.channels 2
- defaults.pcm.dmix.rate 48000
 diff --git a/src/conf/pcm/dmix.conf b/src/conf/pcm/dmix.conf
-index 7fa5c8b2..97936a82 100644
+index 50e573da..70523f29 100644
 --- a/src/conf/pcm/dmix.conf
 +++ b/src/conf/pcm/dmix.conf
 @@ -48,10 +48,6 @@ pcm.!dmix {
@@ -28,7 +28,7 @@ index 7fa5c8b2..97936a82 100644
  		@func refer
  		name defaults.pcm.ipc_perm
 diff --git a/src/conf/pcm/dsnoop.conf b/src/conf/pcm/dsnoop.conf
-index abbd44f7..528fb6ad 100644
+index f4336e5f..60b9f212 100644
 --- a/src/conf/pcm/dsnoop.conf
 +++ b/src/conf/pcm/dsnoop.conf
 @@ -41,10 +41,6 @@ pcm.!dsnoop {

alsa-lib.spec

@@ -1,15 +1,19 @@
+#define  prever     rc3
 #define  prever_dot .rc3
 #define  postver    a
 
-%define version_alsa_lib  1.2.1.2
-%define version_alsa_ucm  1.2.1.2
-%define version_alsa_tplg 1.2.1
+%define version_alsa_lib  1.2.15.3
+%define version_alsa_ucm  1.2.15.3
+%define version_alsa_tplg 1.2.5
+
+%global lib_patch         0
+%global ucm_patch         0
 
 Summary:  The Advanced Linux Sound Architecture (ALSA) library
 Name:     alsa-lib
 Version:  %{version_alsa_lib}
-Release:  3%{?prever_dot}%{?dist}
-License:  LGPLv2+
+Release:  2%{?prever_dot}%{?dist}
+License:  LGPL-2.1-or-later
 URL:      http://www.alsa-project.org/
 
 Source:   ftp://ftp.alsa-project.org/pub/lib/%{name}-%{version}%{?prever}%{?postver}.tar.bz2
@@ -18,12 +22,18 @@ Source2:  ftp://ftp.alsa-project.org/pub/lib/alsa-topology-conf-%{version_alsa_t
 Source10: asound.conf
 Source11: modprobe-dist-alsa.conf
 Source12: modprobe-dist-oss.conf
+%if %{ucm_patch}
+Source40: alsa-ucm-conf.patch
+%endif
+%if %{lib_patch}
 Patch0:   alsa-git.patch
-Patch1:   alsa-lib-1.1.9-config.patch
-Patch2:   alsa-lib-1.0.14-glibc-open.patch
+%endif
+Patch1:   alsa-lib-1.2.3.1-config.patch
+Patch2:   alsa-lib-1.2.10-glibc-open.patch
 
 BuildRequires:  doxygen
 BuildRequires:  autoconf automake libtool
+BuildRequires: make
 
 %description
 The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
@@ -48,8 +58,8 @@ against the ALSA libraries and interfaces.
 %package  -n alsa-ucm
 Summary:   ALSA Use Case Manager configuration
 BuildArch: noarch
-License:   BSD
-Requires:  %{name} >= %{version_alsa_ucm}
+License:   BSD-3-Clause
+Requires:  %{name} >= %{version_alsa_lib}
 
 %description -n alsa-ucm
 The Advanced Linux Sound Architecture (ALSA) Use Case Manager configuration
@@ -58,8 +68,8 @@ contains alsa-lib configuration of Audio input/output names and routing
 %package  -n alsa-topology
 Summary:   ALSA Topology configuration
 BuildArch: noarch
-License:   BSD
-Requires:  %{name} >= %{version_alsa_tplg}
+License:   BSD-3-Clause
+Requires:  %{name} >= %{version_alsa_lib}
 
 %description -n alsa-topology
 The Advanced Linux Sound Architecture (ALSA) topology configuration
@@ -67,11 +77,23 @@ contains alsa-lib configuration of SoC topology
 
 %prep
 %setup -q -n %{name}-%{version}%{?prever}%{?postver}
-%patch0 -p1 -b .alsa-git
-%patch1 -p1 -b .config
-%patch2 -p1 -b .glibc-open
+%if %{lib_patch}
+%patch -P0 -p1 -b .alsa-git
+%endif
+%patch -P1 -p1 -b .config
+%patch -P2 -p1 -b .glibc-open
 
 %build
+# This package uses top level ASM constructs which are incompatible with LTO.
+# Top level ASMs are often used to implement symbol versioning.  gcc-10
+# introduces a new mechanism for symbol versioning which works with LTO.
+# Converting packages to use that mechanism instead of toplevel ASMs is
+# recommended.
+# Note: The v1.2.4 contains changes wich are compatible with gcc-10 LTO
+# although using the old ASM constructs.
+# Enable custom LTO flags
+%define _lto_cflags -flto -ffat-lto-objects -flto-partition=none
+
 autoreconf -vif
 %configure --disable-aload --with-plugindir=%{_libdir}/alsa-lib --disable-alisp
 
@@ -87,13 +109,6 @@ make doc
 
 make DESTDIR=%{buildroot} install
 
-# We need the library to be available even before /usr might be mounted
-mkdir -p %{buildroot}/%{_lib}
-mv %{buildroot}%{_libdir}/libasound.so.* %{buildroot}/%{_lib}
-ln -snf ../../%{_lib}/libasound.so.2 %{buildroot}%{_libdir}/libasound.so
-mv %{buildroot}%{_libdir}/libatopology.so.* %{buildroot}/%{_lib}
-ln -snf ../../%{_lib}/libatopology.so.2 %{buildroot}%{_libdir}/libatopology.so
-
 # Install global configuration files
 mkdir -p -m 755 %{buildroot}/etc
 install -p -m 644 %{SOURCE10} %{buildroot}/etc
@@ -109,13 +124,16 @@ mkdir -p %{buildroot}/%{_datadir}/alsa/ucm
 mkdir -p %{buildroot}/%{_datadir}/alsa/ucm2
 
 # Unpack UCMs
-tar xvjf %{SOURCE1} -C %{buildroot}/%{_datadir}/alsa ucm ucm2
+tar xvjf %{SOURCE1} -C %{buildroot}/%{_datadir}/alsa --strip-components=1 "*/ucm" "*/ucm2"
+%if %{ucm_patch}
+patch -d %{buildroot}/%{_datadir}/alsa -p1 < %{SOURCE40}
+%endif
 
 # Create topology directory
 mkdir -p %{buildroot}/%{_datadir}/alsa/topology
 
 # Unpack topologies
-tar xvjf %{SOURCE2} -C %{buildroot}/%{_datadir}/alsa topology
+tar xvjf %{SOURCE2} -C %{buildroot}/%{_datadir}/alsa --strip-components=1 "*/topology"
 
 # Remove libtool archives.
 find %{buildroot} -name '*.la' -delete
@@ -130,8 +148,8 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 %license COPYING
 %doc doc/asoundrc.txt modprobe-dist-oss.conf
 %config %{_sysconfdir}/asound.conf
-/%{_lib}/libasound.so.*
-/%{_lib}/libatopology.so.*
+/%{_libdir}/libasound.so.*
+/%{_libdir}/libatopology.so.*
 %{_bindir}/aserver
 #{_libdir}/alsa-lib/
 %{_datadir}/alsa/
@@ -160,6 +178,166 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 %{_datadir}/alsa/topology
 
 %changelog
+* Fri Jan 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.15.3-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+
+* Tue Jan 13 2026 Jaroslav Kysela <perex@perex.cz> - 1.2.15.3-1
+- update to 1.2.15.3
+
+* Thu Jan  8 2026 Jaroslav Kysela <perex@perex.cz> - 1.2.15.2-1
+- update to 1.2.15.2
+
+* Fri Dec 19 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.15.1-1
+- update to 1.2.15.1
+
+* Wed Dec 10 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.15-4
+- update to 1.2.15
+
+* Wed Jul 23 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.14-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+
+* Tue Jun 24 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.14-3
+- update to latest alsa-ucm-conf files
+
+* Mon Apr 14 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.14-2
+- update to 1.2.14
+
+* Thu Jan 16 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.13-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+
+* Fri Nov 15 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.13-3
+- update to 1.2.13
+
+* Wed Jul 17 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.12-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
+
+* Mon Jun 10 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.12-1
+- update to 1.2.12
+
+* Mon Jan 29 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.11-2
+- update to 1.2.11
+
+* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.10-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.10-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
+
+* Mon Sep  4 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.10-3
+- fix control.h header file (ump)
+- fix SplitPCM (alsa-ucm)
+
+* Fri Sep  1 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.10-1
+- update to 1.2.10
+
+* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.9-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Tue Jun  6 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-3
+- SPDX licences
+
+* Tue May 16 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-2
+- update ucm (nhlt-dmic-info)
+
+* Thu May  4 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-1
+- update to 1.2.9
+
+* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.8-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
+
+* Wed Dec  7 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.8-2
+- update lib code to latest git
+- update ucm configs to latest git
+
+* Mon Oct 24 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.8-1
+- update to 1.2.8
+
+* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.7.2-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
+
+* Fri Jul  8 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7.1-2
+- update to 1.2.7.2
+
+* Fri Jun 17 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7.1-1
+- update to 1.2.7.1
+
+* Tue May 31 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7-1
+- update to 1.2.7
+
+* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.6.1-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
+
+* Fri Dec 17 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6.1-3
+- updated alsa-ucm-conf to 1.2.6.3
+
+* Fri Dec 10 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6.1-2
+- updated alsa-lib to 1.2.6.1 and alsa-ucm-conf to 1.2.6.2
+
+* Thu Dec  9 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6-3
+- device open fixes from upstream
+
+* Mon Dec  6 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6-1
+- update to 1.2.6
+
+* Sat Nov 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 1.2.5.1-4
+- Add Rockchip ES8316 support
+
+* Tue Aug 31 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5.1-3
+- add UCM related fixes
+
+* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.5.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Mon Jun 14 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5.1-1
+- update to 1.2.5.1
+
+* Wed Jun  2 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5-2
+- add upstream fixes (conf + ucm)
+
+* Fri May 28 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5-1
+- update to 1.2.5
+
+* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.4-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Mon Oct 19 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.4-4
+- update to 1.2.4
+- enable LTO
+
+* Fri Jul 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.3.2-5
+- Second attempt - Rebuilt for
+  https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.3.2-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jul  1 2020 Jeff Law <law@redhat.com> - 1.2.3.2-3
+- Disable LTO
+
+* Mon Jun 29 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3.2-2
+- update to 1.2.3.2
+
+* Thu Jun 18 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3.1-1
+- update to 1.2.3.1
+
+* Sun Jun  7 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3-8
+- update to 1.2.3
+
+* Mon Apr  6 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.2-2
+- UCM2 fixes (RemoveDevice), bug#1786723
+
+* Wed Feb 19 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.2-1
+- Updated to 1.2.2
+
+* Sun Feb  9 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-6
+- More UCM2 related fixes
+
+* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.1.2-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Mon Dec  9 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-4
+- Fixes for sof-hda-dsp UCM2 configuration
+
 * Tue Dec  3 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-3
 - Fixed more UCM2 related issues
 
@@ -172,6 +350,9 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 * Wed Nov 13 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1-3
 - Updated to 1.2.1
 
+* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.1.9-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
 * Fri May 10 2019 Jaroslav Kysela <perex@perex.cz> - 1.1.9-1
 - Updated to 1.1.9
 

sources

@@ -1,5 +1,3 @@
-SHA512 (alsa-lib-1.2.1.1.tar.bz2) = 8a0b6f1ecc58d60991b4509e791b1581eebae57cd754b0b4829e66b1cfee81d588b04f42a17f598f06310b9658d9f46fd748cca516cc48b6f2989389c22c42e9
-SHA512 (alsa-ucm-conf-1.2.1.tar.bz2) = 277e335fff02973628454aca4c8e275e49965cfe1b4a0bc7a6c4833ea14537b39f8175dd0c974577aa98c95e4f7f0981078d70f8a5f083f7c15ab2445f851255
-SHA512 (alsa-topology-conf-1.2.1.tar.bz2) = 3480e58f12aeca04b0c1821e074daeb369949acbcf7bc61b09895ee43de84cb716566518a56a4d681babbb3f13faace5a16fff079d8bdaefc7c27fc1382cd41a
-SHA512 (alsa-ucm-conf-1.2.1.2.tar.bz2) = e498c4355a765eb6ecd03f03611c8904f757bf73619a3c8159c044f80a4c3ab5cbd343692c227e13c6da307fc2e35259b4726902d3ab8e03eff11aa1c74027d5
-SHA512 (alsa-lib-1.2.1.2.tar.bz2) = e8286fd55f63ee0d95513279d0885c287533de89b7af6c338413dec5d38ba4f5a15da1a4a4ce36e052614e4b730e3778782dab9979d82958283be17b48604913
+SHA512 (alsa-lib-1.2.15.3.tar.bz2) = 7fc0fa8a5ae02d3404d2c262c6a14fcbb8b08e25993eac86b9e89b8419ed4d293b422da77b3eb7a1930f26c316b638e5aa7bdba78b0ada9908b0362d132a0cc0
+SHA512 (alsa-ucm-conf-1.2.15.3.tar.bz2) = 079aeb45bc3f98448f6e48a1267db5d3f46a51d7060eb8275d0a084574e23eec34f07108610538e898c397fa24941ccf1bb7722c6b4bb0fa9c48904addc03973
+SHA512 (alsa-topology-conf-1.2.5.tar.bz2) = 2eb4d8baf2dcbf0b631dd11dbf15bffc51694d9cc6931619e51787f3ba58d1a091d266e6721a3b737c040ec74a28270b93f39fb97f30a3227cf340dd646e5d51

tests/run_tests.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+set -ex
+
+# a quick PCM API test
+str=$(aplay -L | grep -E "^null$")
+if [ "$str" != "null" ]; then
+  echo "The 'null' pcm plugin was not found!"
+  exit 99
+fi

tests/tests.yml

@@ -0,0 +1,11 @@
+- hosts: localhost
+  roles:
+    - role: standard-test-basic
+      tags:
+        - classic
+      required_packages:
+        - alsa-utils
+      tests:
+        - simple:
+            dir: .
+            run: ./run_tests.sh