UCM2 fixes, enable alsa-git.patch

.gitignore

@@ -1,3 +1,3 @@
 /alsa-lib-1.*.tar.bz2
-/alsa-topology-conf-1.*.tar.bz2
-/alsa-ucm-conf-1.*.tar.bz2
+/alsa-topology-conf-1.2.1.tar.bz2
+/alsa-ucm-conf-1.2.1.tar.bz2

alsa-git.patch

@@ -0,0 +1,773 @@
+From c79f09e1f5e8b559b58dacdb00708d995b2e3aa5 Mon Sep 17 00:00:00 2001
+From: paulhsia <paulhsia@chromium.org>
+Date: Sat, 30 Nov 2019 03:35:30 +0800
+Subject: [PATCH 01/10] ucm: Use strncmp to avoid access-out-of-boundary
+
+If the length of the identifier is less than the length of the prefix,
+access-out-of-boundary will occur in memcmp().
+
+Signed-off-by: paulhsia <paulhsia@chromium.org>
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/ucm/main.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/src/ucm/main.c b/src/ucm/main.c
+index b0b6ffb3..252e50d9 100644
+--- a/src/ucm/main.c
++++ b/src/ucm/main.c
+@@ -61,11 +61,13 @@ static int check_identifier(const char *identifier, const char *prefix)
+ {
+ 	int len;
+ 
+-	if (strcmp(identifier, prefix) == 0)
+-		return 1;
+ 	len = strlen(prefix);
+-	if (memcmp(identifier, prefix, len) == 0 && identifier[len] == '/')
++	if (strncmp(identifier, prefix, len) != 0)
++		return 0;
++
++	if (identifier[len] == 0 || identifier[len] == '/')
+ 		return 1;
++
+ 	return 0;
+ }
+ 
+-- 
+2.20.1
+
+
+From 9baf64da2f26844434ecea4825052937a3abe06c Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Fri, 29 Nov 2019 22:28:26 +0100
+Subject: [PATCH 02/10] ucm: return always at least NULL if no list is
+ available in snd_use_case_get_list()
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/ucm/main.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/src/ucm/main.c b/src/ucm/main.c
+index 252e50d9..b80db65f 100644
+--- a/src/ucm/main.c
++++ b/src/ucm/main.c
+@@ -1160,8 +1160,10 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
+ 
+ 	modifier = find_modifier(uc_mgr, verb, name, 0);
+ 	if (modifier) {
+-		if (modifier->dev_list.type != type)
++		if (modifier->dev_list.type != type) {
++			*list = NULL;
+ 			return 0;
++		}
+ 		return get_list(&modifier->dev_list.list, list,
+ 				struct dev_list_node, list,
+ 				name);
+@@ -1169,8 +1171,10 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
+ 
+ 	device = find_device(uc_mgr, verb, name, 0);
+ 	if (device) {
+-		if (device->dev_list.type != type)
++		if (device->dev_list.type != type) {
++			*list = NULL;
+ 			return 0;
++		}
+ 		return get_list(&device->dev_list.list, list,
+ 				struct dev_list_node, list,
+ 				name);
+-- 
+2.20.1
+
+
+From ebdd2b6cdb8119cf75f0dd0a3b283d271b3a547e Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Sat, 30 Nov 2019 20:31:55 +0100
+Subject: [PATCH 03/10] ucm: add _identifiers list
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ include/use-case.h |   1 +
+ src/ucm/main.c     | 268 ++++++++++++++++++++++++++++++++++-----------
+ 2 files changed, 208 insertions(+), 61 deletions(-)
+
+diff --git a/include/use-case.h b/include/use-case.h
+index 8e7e838c..85c58ac0 100644
+--- a/include/use-case.h
++++ b/include/use-case.h
+@@ -206,6 +206,7 @@ int snd_use_case_free_list(const char *list[], int items);
+  *   - _enadevs			- get list of enabled devices
+  *   - _enamods			- get list of enabled modifiers
+  *
++ *   - _identifiers/{modifier}|{device}[/{verb}]     - list of value identifiers
+  *   - _supporteddevs/{modifier}|{device}[/{verb}]   - list of supported devices
+  *   - _conflictingdevs/{modifier}|{device}[/{verb}] - list of conflicting devices
+  *
+diff --git a/src/ucm/main.c b/src/ucm/main.c
+index b80db65f..d2078a23 100644
+--- a/src/ucm/main.c
++++ b/src/ucm/main.c
+@@ -1072,7 +1072,6 @@ int snd_use_case_mgr_reset(snd_use_case_mgr_t *uc_mgr)
+ /**
+  * \brief Get list of verbs in pair verbname+comment
+  * \param list Returned list
+- * \param verbname For verb (NULL = current)
+  * \return Number of list entries if success, otherwise a negative error code
+  */
+ static int get_verb_list(snd_use_case_mgr_t *uc_mgr, const char **list[])
+@@ -1181,7 +1180,6 @@ static int get_supcon_device_list(snd_use_case_mgr_t *uc_mgr,
+ 	}
+ 
+ 	return -ENOENT;
+-
+ }
+ 
+ /**
+@@ -1210,41 +1208,201 @@ static int get_conflicting_device_list(snd_use_case_mgr_t *uc_mgr,
+ 
+ #ifndef DOC_HIDDEN
+ struct myvalue {
+-        struct list_head list;
+-        char *value;
++	struct list_head list;
++	const char *text;
+ };
+ #endif
+ 
++/**
++ * \brief Convert myvalue list string list
++ * \param list myvalue list
++ * \param res string list
++ * \retval Number of list entries if success, otherwise a negativer error code
++ */
++static int myvalue_to_str_list(struct list_head *list, char ***res)
++{
++	struct list_head *pos;
++	struct myvalue *value;
++	char **p;
++	int cnt;
++
++	cnt = alloc_str_list(list, 1, res);
++	if (cnt < 0)
++		return cnt;
++	p = *res;
++	list_for_each(pos, list) {
++		value = list_entry(pos, struct myvalue, list);
++		*p = strdup(value->text);
++		if (*p == NULL) {
++			snd_use_case_free_list((const char **)p, cnt);
++			return -ENOMEM;
++		}
++		p++;
++	}
++	return cnt;
++}
++
++/**
++ * \brief Free myvalue list
++ * \param list myvalue list
++ */
++static void myvalue_list_free(struct list_head *list)
++{
++	struct list_head *pos, *npos;
++	struct myvalue *value;
++
++	list_for_each_safe(pos, npos, list) {
++		value = list_entry(pos, struct myvalue, list);
++		list_del(&value->list);
++		free(value);
++	}
++}
++
++/**
++ * \brief Merge one value to the myvalue list
++ * \param list The list with values
++ * \param value The value to be merged (without duplicates)
++ * \return 1 if dup, 0 if success, otherwise a negative error code
++ */
++static int merge_value(struct list_head *list, const char *text)
++{
++	struct list_head *pos;
++	struct myvalue *value;
++
++	list_for_each(pos, list) {
++		value = list_entry(pos, struct myvalue, list);
++		if (strcmp(value->text, text) == 0)
++			return 1;
++	}
++	value = malloc(sizeof(*value));
++	if (value == NULL)
++		return -ENOMEM;
++	value->text = text;
++	list_add_tail(&value->list, list);
++	return 0;
++}
++
++/**
++ * \brief Find all values for given identifier
++ * \param list Returned list
++ * \param source Source list with ucm_value structures
++ * \return Zero if success, otherwise a negative error code
++ */
++static int add_identifiers(struct list_head *list,
++			   struct list_head *source)
++{
++	struct ucm_value *v;
++	struct list_head *pos;
++	int err;
++
++	list_for_each(pos, source) {
++		v = list_entry(pos, struct ucm_value, list);
++		err = merge_value(list, v->name);
++		if (err < 0)
++			return err;
++	}
++	return 0;
++}
++
++/**
++ * \brief Find all values for given identifier
++ * \param list Returned list
++ * \param identifier Identifier
++ * \param source Source list with ucm_value structures
++ */
+ static int add_values(struct list_head *list,
+                       const char *identifier,
+                       struct list_head *source)
+ {
+-        struct ucm_value *v;
+-        struct myvalue *val;
+-        struct list_head *pos, *pos1;
+-        int match;
++	struct ucm_value *v;
++	struct list_head *pos;
++	int err;
+         
+-        list_for_each(pos, source) {
+-                v = list_entry(pos, struct ucm_value, list);
+-                if (check_identifier(identifier, v->name)) {
+-                        match = 0;
+-                        list_for_each(pos1, list) {
+-                                val = list_entry(pos1, struct myvalue, list);
+-                                if (strcmp(val->value, v->data) == 0) {
+-                                        match = 1;
+-                                        break;
+-                                }
+-                        }
+-                        if (!match) {
+-                                val = malloc(sizeof(struct myvalue));
+-                                if (val == NULL)
+-                                        return -ENOMEM;
+-				val->value = v->data;
+-                                list_add_tail(&val->list, list);
+-                        }
+-                }
+-        }
+-        return 0;
++	list_for_each(pos, source) {
++		v = list_entry(pos, struct ucm_value, list);
++		if (check_identifier(identifier, v->name)) {
++			err = merge_value(list, v->data);
++			if (err < 0)
++				return err;
++		}
++	}
++	return 0;
++}
++
++/**
++ * \brief compare two identifiers
++ */
++static int identifier_cmp(const void *_a, const void *_b)
++{
++	const char * const *a = _a;
++	const char * const *b = _b;
++	return strcmp(*a, *b);
++}
++
++/**
++ * \brief Get list of available identifiers
++ * \param list Returned list
++ * \param name Name of verb or modifier to query
++ * \return Number of list entries if success, otherwise a negative error code
++ */
++static int get_identifiers_list(snd_use_case_mgr_t *uc_mgr,
++				const char **list[], char *name)
++{
++	struct use_case_verb *verb;
++	struct use_case_modifier *modifier;
++	struct use_case_device *device;
++	struct list_head mylist;
++	struct list_head *value_list;
++	char *str, **res;
++	int err;
++
++	if (!name)
++		return -ENOENT;
++
++	str = strchr(name, '/');
++	if (str) {
++		*str = '\0';
++		verb = find_verb(uc_mgr, str + 1);
++	}
++	else {
++		verb = uc_mgr->active_verb;
++	}
++	if (!verb)
++		return -ENOENT;
++
++	value_list = NULL;
++	modifier = find_modifier(uc_mgr, verb, name, 0);
++	if (modifier) {
++		value_list = &modifier->value_list;
++	} else {
++		device = find_device(uc_mgr, verb, name, 0);
++		if (device)
++			value_list = &device->value_list;
++	}
++	if (value_list == NULL)
++		return -ENOENT;
++
++	INIT_LIST_HEAD(&mylist);
++	err = add_identifiers(&mylist, &uc_mgr->value_list);
++	if (err < 0)
++		goto __fail;
++	err = add_identifiers(&mylist, &verb->value_list);
++	if (err < 0)
++		goto __fail;
++	err = add_identifiers(&mylist, value_list);
++	if (err < 0)
++		goto __fail;
++	err = myvalue_to_str_list(&mylist, &res);
++	if (err > 0)
++		*list = (const char **)res;
++	else if (err == 0)
++		*list = NULL;
++__fail:
++	myvalue_list_free(&mylist);
++	if (err <= 0)
++		return err;
++	qsort(*list, err, sizeof(char *), identifier_cmp);
++	return err;
+ }
+ 
+ /**
+@@ -1258,8 +1416,7 @@ static int get_value_list(snd_use_case_mgr_t *uc_mgr,
+                           const char **list[],
+                           char *verbname)
+ {
+-        struct list_head mylist, *pos, *npos;
+-        struct myvalue *val;
++	struct list_head mylist, *pos;
+         struct use_case_verb *verb;
+         struct use_case_device *dev;
+         struct use_case_modifier *mod;
+@@ -1292,26 +1449,13 @@ static int get_value_list(snd_use_case_mgr_t *uc_mgr,
+                 if (err < 0)
+                         goto __fail;
+         }
+-        err = alloc_str_list(&mylist, 1, &res);
+-        if (err >= 0) {
++	err = myvalue_to_str_list(&mylist, &res);
++	if (err > 0)
+ 	        *list = (const char **)res;
+-                list_for_each(pos, &mylist) {
+-                        val = list_entry(pos, struct myvalue, list);
+-                        *res = strdup(val->value);
+-                        if (*res == NULL) {
+-                                snd_use_case_free_list((const char **)res, err);
+-                                err = -ENOMEM;
+-                                goto __fail;
+-                        }
+-                        res++;
+-                }
+-        }
++	else if (err == 0)
++		*list = NULL;
+       __fail:
+-        list_for_each_safe(pos, npos, &mylist) {
+-                val = list_entry(pos, struct myvalue, list);
+-                list_del(&val->list);
+-                free(val);
+-        }
++	myvalue_list_free(&mylist);
+         return err;
+ }
+ 
+@@ -1381,21 +1525,23 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+                 } else {
+                         str = NULL;
+                 }
+-        	if (check_identifier(identifier, "_devices"))
+-          		err = get_device_list(uc_mgr, list, str);
++		if (check_identifier(identifier, "_devices"))
++			err = get_device_list(uc_mgr, list, str);
+                 else if (check_identifier(identifier, "_modifiers"))
+-                        err = get_modifier_list(uc_mgr, list, str);
+-                else if (check_identifier(identifier, "_supporteddevs"))
+-                        err = get_supported_device_list(uc_mgr, list, str);
+-                else if (check_identifier(identifier, "_conflictingdevs"))
+-                        err = get_conflicting_device_list(uc_mgr, list, str);
++			err = get_modifier_list(uc_mgr, list, str);
++		else if (check_identifier(identifier, "_identifiers"))
++			err = get_identifiers_list(uc_mgr, list, str);
++		else if (check_identifier(identifier, "_supporteddevs"))
++			err = get_supported_device_list(uc_mgr, list, str);
++		else if (check_identifier(identifier, "_conflictingdevs"))
++			err = get_conflicting_device_list(uc_mgr, list, str);
+ 		else if (identifier[0] == '_')
+ 			err = -ENOENT;
+-                else
+-                        err = get_value_list(uc_mgr, identifier, list, str);
+-        	if (str)
+-        		free(str);
+-        }
++		else
++			err = get_value_list(uc_mgr, identifier, list, str);
++		if (str)
++			free(str);
++	}
+       __end:
+ 	pthread_mutex_unlock(&uc_mgr->mutex);
+ 	return err;
+-- 
+2.20.1
+
+
+From 5ee5ef31b5ff3fb7c904054cb9cac7478a727f7c Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Sun, 1 Dec 2019 14:26:40 +0100
+Subject: [PATCH 04/10] namehint: correct the @args check
+
+BugLink: https://github.com/alsa-project/alsa-plugins/issues/3
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/control/namehint.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/src/control/namehint.c b/src/control/namehint.c
+index 808df6b5..4927ef97 100644
+--- a/src/control/namehint.c
++++ b/src/control/namehint.c
+@@ -348,6 +348,12 @@ static int try_config(snd_config_t *config,
+ 		goto __cleanup;
+ 	if (snd_config_search(res, "@args", &cfg) >= 0) {
+ 		snd_config_for_each(i, next, cfg) {
++			/* skip the argument list */
++			snd_config_get_id(snd_config_iterator_entry(i), &str);
++			while (*str && *str >= '0' && *str <= '9') str++;
++			if (*str == '\0')
++				continue;
++			/* the argument definition must have the default */
+ 			if (snd_config_search(snd_config_iterator_entry(i),
+ 					      "default", NULL) < 0) {
+ 				err = -EINVAL;
+-- 
+2.20.1
+
+
+From 6055f8a584296abfc0cec0439ceb708f0eddcc9d Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Sun, 1 Dec 2019 14:30:54 +0100
+Subject: [PATCH 05/10] namehint: improve the previous patch (check the
+ returned value)
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/control/namehint.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/src/control/namehint.c b/src/control/namehint.c
+index 4927ef97..60c48ae3 100644
+--- a/src/control/namehint.c
++++ b/src/control/namehint.c
+@@ -349,7 +349,8 @@ static int try_config(snd_config_t *config,
+ 	if (snd_config_search(res, "@args", &cfg) >= 0) {
+ 		snd_config_for_each(i, next, cfg) {
+ 			/* skip the argument list */
+-			snd_config_get_id(snd_config_iterator_entry(i), &str);
++			if (snd_config_get_id(snd_config_iterator_entry(i), &str) < 0)
++				continue;
+ 			while (*str && *str >= '0' && *str <= '9') str++;
+ 			if (*str == '\0')
+ 				continue;
+-- 
+2.20.1
+
+
+From 4dddcf733d56a13f4d042fefa1fb6230c09f1f65 Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Mon, 2 Dec 2019 11:56:30 +0100
+Subject: [PATCH 06/10] ucm: docs - allow spaces in device names for JackHWMute
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ include/use-case.h | 25 +++++++++++++------------
+ 1 file changed, 13 insertions(+), 12 deletions(-)
+
+diff --git a/include/use-case.h b/include/use-case.h
+index 85c58ac0..e1f58027 100644
+--- a/include/use-case.h
++++ b/include/use-case.h
+@@ -326,7 +326,7 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+  *      - Valid values: "soft" (software attenuation)
+  *   - EDIDFile
+  *      - Path to EDID file for HDMI devices
+- *   - JackControl, JackDev, JackHWMute
++ *   - JackControl, JackDev
+  *      - Jack information for a device. The jack status can be reported via
+  *        a kcontrol and/or via an input device. **JackControl** is the
+  *        kcontrol name of the jack, and **JackDev** is the input device id of
+@@ -334,17 +334,18 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+  *        JackDev value should be "foo"). UCM configuration files should
+  *        contain both JackControl and JackDev when possible, because
+  *        applications are likely to support only one or the other.
+- *
+- *        If **JackHWMute** is set, it indicates that when the jack is plugged
+- *        in, the hardware automatically mutes some other device(s). The
+- *        JackHWMute value is a space-separated list of device names (this
+- *        isn't compatible with device names with spaces in them, so don't use
+- *        such device names!). Note that JackHWMute should be used only when
+- *        the hardware enforces the automatic muting. If the hardware doesn't
+- *        enforce any muting, it may still be tempting to set JackHWMute to
+- *        trick upper software layers to e.g. automatically mute speakers when
+- *        headphones are plugged in, but that's application policy
+- *        configuration that doesn't belong to UCM configuration files.
++ *   - JackHWMute
++ *	  If this value is set, it indicates that when the jack is plugged
++ *	  in, the hardware automatically mutes some other device(s). The
++ *	  value is a space-separated list of device names. If the device
++ *	  name contains space, it must be enclosed to ' or ", e.g.:
++ *		JackHWMute "'Dock Headphone' Headphone"
++ *        Note that JackHWMute should be used only when the hardware enforces
++ *        the automatic muting. If the hardware doesn't enforce any muting, it
++ *        may still be tempting to set JackHWMute to trick upper software layers
++ *        to e.g. automatically mute speakers when headphones are plugged in,
++ *        but that's application policy configuration that doesn't belong
++ *        to UCM configuration files.
+  *   - MinBufferLevel
+  *	- This is used on platform where reported buffer level is not accurate.
+  *	  E.g. "512", which holds 512 samples in device buffer. Note: this will
+-- 
+2.20.1
+
+
+From 2a286ca9a8415571181ce58027686ec332a834e9 Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Mon, 2 Dec 2019 11:57:18 +0100
+Subject: [PATCH 07/10] use-case: docs - add PlaybackMixerCopy and
+ CaptureMixerCopy
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ include/use-case.h | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/include/use-case.h b/include/use-case.h
+index e1f58027..71fcc949 100644
+--- a/include/use-case.h
++++ b/include/use-case.h
+@@ -309,8 +309,14 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+  *   - PlaybackMixerElem
+  *      - mixer element playback identifier
+  *	- can be parsed using snd_use_case_parse_selem_id()
++ *   - PlaybackMixerCopy
++ *      - additional mixer element playback identifier
++ *	- can be parsed using snd_use_case_parse_selem_id()
++ *      - those elements should copy the volume and switch settings
++ *      - element identifiers are separated using the | character
+  *   - PlaybackMasterElem
+  *      - mixer element playback identifier for the master control
++ *	- can be parsed using snd_use_case_parse_selem_id()
+  *   - PlaybackMasterType
+  *      - type of the master volume control
+  *      - Valid values: "soft" (software attenuation)
+@@ -319,8 +325,14 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+  *   - CaptureMixerElem
+  *      - mixer element capture identifier
+  *	- can be parsed using snd_use_case_parse_selem_id()
++ *   - CaptureMixerCopy
++ *      - additional mixer element capture identifier
++ *	- can be parsed using snd_use_case_parse_selem_id()
++ *      - those elements should copy the volume and switch settings
++ *      - element identifiers are separated using the | character
+  *   - CaptureMasterElem
+  *      - mixer element playback identifier for the master control
++ *	- can be parsed using snd_use_case_parse_selem_id()
+  *   - CaptureMasterType
+  *      - type of the master volume control
+  *      - Valid values: "soft" (software attenuation)
+-- 
+2.20.1
+
+
+From a0fc4447bb7c7f9a850a0a85f3a5a32c1509caf4 Mon Sep 17 00:00:00 2001
+From: Jaroslav Kysela <perex@perex.cz>
+Date: Tue, 3 Dec 2019 15:01:04 +0100
+Subject: [PATCH 08/10] ucm: docs - add JackCTL, rearrange JackControl and
+ JackDev
+
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ include/use-case.h | 22 ++++++++++++++--------
+ 1 file changed, 14 insertions(+), 8 deletions(-)
+
+diff --git a/include/use-case.h b/include/use-case.h
+index 71fcc949..25998cb9 100644
+--- a/include/use-case.h
++++ b/include/use-case.h
+@@ -338,14 +338,20 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
+  *      - Valid values: "soft" (software attenuation)
+  *   - EDIDFile
+  *      - Path to EDID file for HDMI devices
+- *   - JackControl, JackDev
+- *      - Jack information for a device. The jack status can be reported via
+- *        a kcontrol and/or via an input device. **JackControl** is the
+- *        kcontrol name of the jack, and **JackDev** is the input device id of
+- *        the jack (if the full input device path is /dev/input/by-id/foo, the
+- *        JackDev value should be "foo"). UCM configuration files should
+- *        contain both JackControl and JackDev when possible, because
+- *        applications are likely to support only one or the other.
++ *   - JackCTL
++ *      - jack control device name
++ *   - JackControl
++ *      - jack control identificator
++ *      - can be parsed using snd_use_case_parse_ctl_elem_id()
++ *      - UCM configuration files should contain both JackControl and JackDev
++ *        when possible, because applications are likely to support only one
++ *        or the other
++ *   - JackDev
++ *      - the input device id of the jack (if the full input device path is
++ *        /dev/input/by-id/foo, the JackDev value should be "foo")
++ *      - UCM configuration files should contain both JackControl and JackDev
++ *        when possible, because applications are likely to support only one
++ *        or the other
+  *   - JackHWMute
+  *	  If this value is set, it indicates that when the jack is plugged
+  *	  in, the hardware automatically mutes some other device(s). The
+-- 
+2.20.1
+
+
+From e59034a0bec257cc7422a1e9436d936be8696a6f Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 3 Dec 2019 18:27:39 +0100
+Subject: [PATCH 09/10] ucm: Do not fail to parse configs on cards with an
+ empty CardComponents lists
+
+Since the UCM profiles for all Bay- and Cherry-Trail SST cards have been
+moved over to UCM2, parsing them fails with:
+
+ALSA lib ucm_subs.c:220:(uc_mgr_get_substituted_value) variable '${CardComponents}' is not defined in this context!
+
+This completely breaks audio support on all Bay- and Cherry-Trail devices.
+
+This is caused by these non-SOF ASoC using cards having an empty
+CardComponents list. Which in itself is fine, but is rejected by
+the ucm_subs.c code. This commit changes the ucm_subs code to accept
+an empty string as a valid value for CardComponents restoring audio
+functionality on these boards.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/ucm/ucm_subs.c | 20 ++++++++++++--------
+ 1 file changed, 12 insertions(+), 8 deletions(-)
+
+diff --git a/src/ucm/ucm_subs.c b/src/ucm/ucm_subs.c
+index 00afa9e3..90e395f0 100644
+--- a/src/ucm/ucm_subs.c
++++ b/src/ucm/ucm_subs.c
+@@ -25,6 +25,7 @@
+  */
+ 
+ #include "ucm_local.h"
++#include <stdbool.h>
+ #include <sys/stat.h>
+ #include <limits.h>
+ 
+@@ -145,10 +146,11 @@ static char *rval_sysfs(snd_use_case_mgr_t *uc_mgr ATTRIBUTE_UNUSED, const char
+ 	return strdup(path);
+ }
+ 
+-#define MATCH_VARIABLE(name, id, fcn)					\
++#define MATCH_VARIABLE(name, id, fcn, empty_ok)				\
+ 	if (strncmp((name), (id), sizeof(id) - 1) == 0) { 		\
+ 		rval = fcn(uc_mgr);					\
+ 		idsize = sizeof(id) - 1;				\
++		allow_empty = (empty_ok);				\
+ 		goto __rval;						\
+ 	}
+ 
+@@ -189,12 +191,14 @@ int uc_mgr_get_substituted_value(snd_use_case_mgr_t *uc_mgr,
+ 
+ 	while (*value) {
+ 		if (*value == '$' && *(value+1) == '{') {
+-			MATCH_VARIABLE(value, "${ConfName}", rval_conf_name);
+-			MATCH_VARIABLE(value, "${CardId}", rval_card_id);
+-			MATCH_VARIABLE(value, "${CardDriver}", rval_card_driver);
+-			MATCH_VARIABLE(value, "${CardName}", rval_card_name);
+-			MATCH_VARIABLE(value, "${CardLongName}", rval_card_longname);
+-			MATCH_VARIABLE(value, "${CardComponents}", rval_card_components);
++			bool allow_empty = false;
++
++			MATCH_VARIABLE(value, "${ConfName}", rval_conf_name, false);
++			MATCH_VARIABLE(value, "${CardId}", rval_card_id, false);
++			MATCH_VARIABLE(value, "${CardDriver}", rval_card_driver, false);
++			MATCH_VARIABLE(value, "${CardName}", rval_card_name, false);
++			MATCH_VARIABLE(value, "${CardLongName}", rval_card_longname, false);
++			MATCH_VARIABLE(value, "${CardComponents}", rval_card_components, true);
+ 			MATCH_VARIABLE2(value, "${env:", rval_env);
+ 			MATCH_VARIABLE2(value, "${sys:", rval_sysfs);
+ 			err = -EINVAL;
+@@ -208,7 +212,7 @@ int uc_mgr_get_substituted_value(snd_use_case_mgr_t *uc_mgr,
+ 			}
+ 			goto __error;
+ __rval:
+-			if (rval == NULL || rval[0] == '\0') {
++			if (rval == NULL || (!allow_empty && rval[0] == '\0')) {
+ 				free(rval);
+ 				strncpy(r, value, idsize);
+ 				r[idsize] = '\0';
+-- 
+2.20.1
+
+
+From 8e2c70add782f997f7c269ed3f722888e56ff024 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+Date: Tue, 3 Dec 2019 18:56:40 +0100
+Subject: [PATCH 10/10] src/ucm/main.c: fix build without mixer
+
+Commit 4ce38a5ff466d18039b2606938f866ea3a6c9f3c breaks the build without
+mixer on:
+
+  CCLD     libasound.la
+/home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/8.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: ucm/.libs/libucm.a(main.o): in function `snd_use_case_set':
+main.c:(.text+0x185c): undefined reference to `snd_mixer_selem_id_parse'
+
+Fixes: http://autobuild.buildroot.org/results/4d91c9f82a2a61c50c457a851073b85cc09ea345
+
+Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+Signed-off-by: Jaroslav Kysela <perex@perex.cz>
+---
+ src/ucm/main.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/ucm/main.c b/src/ucm/main.c
+index d2078a23..61922f10 100644
+--- a/src/ucm/main.c
++++ b/src/ucm/main.c
+@@ -2115,8 +2115,10 @@ int snd_use_case_parse_selem_id(snd_mixer_selem_id_t *dst,
+ 				const char *ucm_id,
+ 				const char *value)
+ {
++#ifdef BUILD_MIXER
+ 	if (strcmp(ucm_id, "PlaybackMixerId") == 0 ||
+ 	    strcmp(ucm_id, "CaptureMixerId") == 0)
+ 		return snd_mixer_selem_id_parse(dst, value);
++#endif
+ 	return -EINVAL;
+ }
+-- 
+2.20.1
+

alsa-lib-1.0.14-glibc-open.patch

@@ -0,0 +1,11 @@
+--- alsa-lib-1.0.14/aserver/aserver.c	2007-05-31 10:05:13.000000000 +0200
++++ alsa-lib-1.0.14.lennart/aserver/aserver.c	2007-08-15 15:53:32.000000000 +0200
+@@ -35,6 +35,8 @@
+ 
+ #include "aserver.h"
+ 
++#undef open
++
+ char *command;
+ 
+ #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)

alsa-lib-1.1.9-config.patch

@@ -1,19 +1,19 @@
 diff --git a/src/conf/alsa.conf b/src/conf/alsa.conf
-index 18427ec6..1915af4e 100644
+index 09980586..c4525f0b 100644
 --- a/src/conf/alsa.conf
 +++ b/src/conf/alsa.conf
-@@ -80,8 +80,7 @@ defaults.pcm.nonblock 1
+@@ -67,8 +67,7 @@ defaults.pcm.nonblock 1
  defaults.pcm.compat 0
  defaults.pcm.minperiodtime 5000		# in us
  defaults.pcm.ipc_key 5678293
 -defaults.pcm.ipc_gid audio
 -defaults.pcm.ipc_perm 0660
 +defaults.pcm.ipc_perm 0600
- defaults.pcm.tstamp_type default
  defaults.pcm.dmix.max_periods 0
  defaults.pcm.dmix.channels 2
+ defaults.pcm.dmix.rate 48000
 diff --git a/src/conf/pcm/dmix.conf b/src/conf/pcm/dmix.conf
-index 50e573da..70523f29 100644
+index 7fa5c8b2..97936a82 100644
 --- a/src/conf/pcm/dmix.conf
 +++ b/src/conf/pcm/dmix.conf
 @@ -48,10 +48,6 @@ pcm.!dmix {
@@ -28,7 +28,7 @@ index 50e573da..70523f29 100644
  		@func refer
  		name defaults.pcm.ipc_perm
 diff --git a/src/conf/pcm/dsnoop.conf b/src/conf/pcm/dsnoop.conf
-index f4336e5f..60b9f212 100644
+index abbd44f7..528fb6ad 100644
 --- a/src/conf/pcm/dsnoop.conf
 +++ b/src/conf/pcm/dsnoop.conf
 @@ -41,10 +41,6 @@ pcm.!dsnoop {

alsa-lib-1.2.10-glibc-open.patch

@@ -1,10 +0,0 @@
---- alsa-lib-1.2.10/aserver/aserver.c~	2023-09-01 17:35:48.000000000 +0200
-+++ alsa-lib-1.2.10/aserver/aserver.c	2023-09-01 18:13:11.339601685 +0200
-@@ -35,6 +35,7 @@
- #include <limits.h>
- #include <signal.h>
- 
-+#undef open
- 
- char *command;
- 

alsa-lib.spec

@@ -1,19 +1,15 @@
-#define  prever     rc3
 #define  prever_dot .rc3
 #define  postver    a
 
-%define version_alsa_lib  1.2.15.3
-%define version_alsa_ucm  1.2.15.3
-%define version_alsa_tplg 1.2.5
-
-%global lib_patch         0
-%global ucm_patch         0
+%define version_alsa_lib  1.2.1.2
+%define version_alsa_ucm  1.2.1.2
+%define version_alsa_tplg 1.2.1
 
 Summary:  The Advanced Linux Sound Architecture (ALSA) library
 Name:     alsa-lib
 Version:  %{version_alsa_lib}
-Release:  2%{?prever_dot}%{?dist}
-License:  LGPL-2.1-or-later
+Release:  3%{?prever_dot}%{?dist}
+License:  LGPLv2+
 URL:      http://www.alsa-project.org/
 
 Source:   ftp://ftp.alsa-project.org/pub/lib/%{name}-%{version}%{?prever}%{?postver}.tar.bz2
@@ -22,18 +18,12 @@ Source2:  ftp://ftp.alsa-project.org/pub/lib/alsa-topology-conf-%{version_alsa_t
 Source10: asound.conf
 Source11: modprobe-dist-alsa.conf
 Source12: modprobe-dist-oss.conf
-%if %{ucm_patch}
-Source40: alsa-ucm-conf.patch
-%endif
-%if %{lib_patch}
 Patch0:   alsa-git.patch
-%endif
-Patch1:   alsa-lib-1.2.3.1-config.patch
-Patch2:   alsa-lib-1.2.10-glibc-open.patch
+Patch1:   alsa-lib-1.1.9-config.patch
+Patch2:   alsa-lib-1.0.14-glibc-open.patch
 
 BuildRequires:  doxygen
 BuildRequires:  autoconf automake libtool
-BuildRequires: make
 
 %description
 The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
@@ -58,8 +48,8 @@ against the ALSA libraries and interfaces.
 %package  -n alsa-ucm
 Summary:   ALSA Use Case Manager configuration
 BuildArch: noarch
-License:   BSD-3-Clause
-Requires:  %{name} >= %{version_alsa_lib}
+License:   BSD
+Requires:  %{name} >= %{version_alsa_ucm}
 
 %description -n alsa-ucm
 The Advanced Linux Sound Architecture (ALSA) Use Case Manager configuration
@@ -68,8 +58,8 @@ contains alsa-lib configuration of Audio input/output names and routing
 %package  -n alsa-topology
 Summary:   ALSA Topology configuration
 BuildArch: noarch
-License:   BSD-3-Clause
-Requires:  %{name} >= %{version_alsa_lib}
+License:   BSD
+Requires:  %{name} >= %{version_alsa_tplg}
 
 %description -n alsa-topology
 The Advanced Linux Sound Architecture (ALSA) topology configuration
@@ -77,23 +67,11 @@ contains alsa-lib configuration of SoC topology
 
 %prep
 %setup -q -n %{name}-%{version}%{?prever}%{?postver}
-%if %{lib_patch}
-%patch -P0 -p1 -b .alsa-git
-%endif
-%patch -P1 -p1 -b .config
-%patch -P2 -p1 -b .glibc-open
+%patch0 -p1 -b .alsa-git
+%patch1 -p1 -b .config
+%patch2 -p1 -b .glibc-open
 
 %build
-# This package uses top level ASM constructs which are incompatible with LTO.
-# Top level ASMs are often used to implement symbol versioning.  gcc-10
-# introduces a new mechanism for symbol versioning which works with LTO.
-# Converting packages to use that mechanism instead of toplevel ASMs is
-# recommended.
-# Note: The v1.2.4 contains changes wich are compatible with gcc-10 LTO
-# although using the old ASM constructs.
-# Enable custom LTO flags
-%define _lto_cflags -flto -ffat-lto-objects -flto-partition=none
-
 autoreconf -vif
 %configure --disable-aload --with-plugindir=%{_libdir}/alsa-lib --disable-alisp
 
@@ -109,6 +87,13 @@ make doc
 
 make DESTDIR=%{buildroot} install
 
+# We need the library to be available even before /usr might be mounted
+mkdir -p %{buildroot}/%{_lib}
+mv %{buildroot}%{_libdir}/libasound.so.* %{buildroot}/%{_lib}
+ln -snf ../../%{_lib}/libasound.so.2 %{buildroot}%{_libdir}/libasound.so
+mv %{buildroot}%{_libdir}/libatopology.so.* %{buildroot}/%{_lib}
+ln -snf ../../%{_lib}/libatopology.so.2 %{buildroot}%{_libdir}/libatopology.so
+
 # Install global configuration files
 mkdir -p -m 755 %{buildroot}/etc
 install -p -m 644 %{SOURCE10} %{buildroot}/etc
@@ -124,16 +109,13 @@ mkdir -p %{buildroot}/%{_datadir}/alsa/ucm
 mkdir -p %{buildroot}/%{_datadir}/alsa/ucm2
 
 # Unpack UCMs
-tar xvjf %{SOURCE1} -C %{buildroot}/%{_datadir}/alsa --strip-components=1 "*/ucm" "*/ucm2"
-%if %{ucm_patch}
-patch -d %{buildroot}/%{_datadir}/alsa -p1 < %{SOURCE40}
-%endif
+tar xvjf %{SOURCE1} -C %{buildroot}/%{_datadir}/alsa ucm ucm2
 
 # Create topology directory
 mkdir -p %{buildroot}/%{_datadir}/alsa/topology
 
 # Unpack topologies
-tar xvjf %{SOURCE2} -C %{buildroot}/%{_datadir}/alsa --strip-components=1 "*/topology"
+tar xvjf %{SOURCE2} -C %{buildroot}/%{_datadir}/alsa topology
 
 # Remove libtool archives.
 find %{buildroot} -name '*.la' -delete
@@ -148,8 +130,8 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 %license COPYING
 %doc doc/asoundrc.txt modprobe-dist-oss.conf
 %config %{_sysconfdir}/asound.conf
-/%{_libdir}/libasound.so.*
-/%{_libdir}/libatopology.so.*
+/%{_lib}/libasound.so.*
+/%{_lib}/libatopology.so.*
 %{_bindir}/aserver
 #{_libdir}/alsa-lib/
 %{_datadir}/alsa/
@@ -178,166 +160,6 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 %{_datadir}/alsa/topology
 
 %changelog
-* Fri Jan 16 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.15.3-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
-
-* Tue Jan 13 2026 Jaroslav Kysela <perex@perex.cz> - 1.2.15.3-1
-- update to 1.2.15.3
-
-* Thu Jan  8 2026 Jaroslav Kysela <perex@perex.cz> - 1.2.15.2-1
-- update to 1.2.15.2
-
-* Fri Dec 19 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.15.1-1
-- update to 1.2.15.1
-
-* Wed Dec 10 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.15-4
-- update to 1.2.15
-
-* Wed Jul 23 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.14-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
-
-* Tue Jun 24 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.14-3
-- update to latest alsa-ucm-conf files
-
-* Mon Apr 14 2025 Jaroslav Kysela <perex@perex.cz> - 1.2.14-2
-- update to 1.2.14
-
-* Thu Jan 16 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.13-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
-
-* Fri Nov 15 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.13-3
-- update to 1.2.13
-
-* Wed Jul 17 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.12-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Mon Jun 10 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.12-1
-- update to 1.2.12
-
-* Mon Jan 29 2024 Jaroslav Kysela <perex@perex.cz> - 1.2.11-2
-- update to 1.2.11
-
-* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.10-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.10-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Mon Sep  4 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.10-3
-- fix control.h header file (ump)
-- fix SplitPCM (alsa-ucm)
-
-* Fri Sep  1 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.10-1
-- update to 1.2.10
-
-* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.9-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Tue Jun  6 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-3
-- SPDX licences
-
-* Tue May 16 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-2
-- update ucm (nhlt-dmic-info)
-
-* Thu May  4 2023 Jaroslav Kysela <perex@perex.cz> - 1.2.9-1
-- update to 1.2.9
-
-* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.8-3
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
-* Wed Dec  7 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.8-2
-- update lib code to latest git
-- update ucm configs to latest git
-
-* Mon Oct 24 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.8-1
-- update to 1.2.8
-
-* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.7.2-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
-
-* Fri Jul  8 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7.1-2
-- update to 1.2.7.2
-
-* Fri Jun 17 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7.1-1
-- update to 1.2.7.1
-
-* Tue May 31 2022 Jaroslav Kysela <perex@perex.cz> - 1.2.7-1
-- update to 1.2.7
-
-* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.6.1-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
-
-* Fri Dec 17 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6.1-3
-- updated alsa-ucm-conf to 1.2.6.3
-
-* Fri Dec 10 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6.1-2
-- updated alsa-lib to 1.2.6.1 and alsa-ucm-conf to 1.2.6.2
-
-* Thu Dec  9 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6-3
-- device open fixes from upstream
-
-* Mon Dec  6 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.6-1
-- update to 1.2.6
-
-* Sat Nov 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 1.2.5.1-4
-- Add Rockchip ES8316 support
-
-* Tue Aug 31 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5.1-3
-- add UCM related fixes
-
-* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.5.1-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
-
-* Mon Jun 14 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5.1-1
-- update to 1.2.5.1
-
-* Wed Jun  2 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5-2
-- add upstream fixes (conf + ucm)
-
-* Fri May 28 2021 Jaroslav Kysela <perex@perex.cz> - 1.2.5-1
-- update to 1.2.5
-
-* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.4-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
-
-* Mon Oct 19 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.4-4
-- update to 1.2.4
-- enable LTO
-
-* Fri Jul 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.3.2-5
-- Second attempt - Rebuilt for
-  https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.3.2-4
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
-
-* Wed Jul  1 2020 Jeff Law <law@redhat.com> - 1.2.3.2-3
-- Disable LTO
-
-* Mon Jun 29 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3.2-2
-- update to 1.2.3.2
-
-* Thu Jun 18 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3.1-1
-- update to 1.2.3.1
-
-* Sun Jun  7 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.3-8
-- update to 1.2.3
-
-* Mon Apr  6 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.2-2
-- UCM2 fixes (RemoveDevice), bug#1786723
-
-* Wed Feb 19 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.2-1
-- Updated to 1.2.2
-
-* Sun Feb  9 2020 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-6
-- More UCM2 related fixes
-
-* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.1.2-5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
-
-* Mon Dec  9 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-4
-- Fixes for sof-hda-dsp UCM2 configuration
-
 * Tue Dec  3 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1.2-3
 - Fixed more UCM2 related issues
 
@@ -350,9 +172,6 @@ rm %{buildroot}/%{_includedir}/asoundlib.h
 * Wed Nov 13 2019 Jaroslav Kysela <perex@perex.cz> - 1.2.1-3
 - Updated to 1.2.1
 
-* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.1.9-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
-
 * Fri May 10 2019 Jaroslav Kysela <perex@perex.cz> - 1.1.9-1
 - Updated to 1.1.9
 

sources

@@ -1,3 +1,5 @@
-SHA512 (alsa-lib-1.2.15.3.tar.bz2) = 7fc0fa8a5ae02d3404d2c262c6a14fcbb8b08e25993eac86b9e89b8419ed4d293b422da77b3eb7a1930f26c316b638e5aa7bdba78b0ada9908b0362d132a0cc0
-SHA512 (alsa-ucm-conf-1.2.15.3.tar.bz2) = 079aeb45bc3f98448f6e48a1267db5d3f46a51d7060eb8275d0a084574e23eec34f07108610538e898c397fa24941ccf1bb7722c6b4bb0fa9c48904addc03973
-SHA512 (alsa-topology-conf-1.2.5.tar.bz2) = 2eb4d8baf2dcbf0b631dd11dbf15bffc51694d9cc6931619e51787f3ba58d1a091d266e6721a3b737c040ec74a28270b93f39fb97f30a3227cf340dd646e5d51
+SHA512 (alsa-lib-1.2.1.1.tar.bz2) = 8a0b6f1ecc58d60991b4509e791b1581eebae57cd754b0b4829e66b1cfee81d588b04f42a17f598f06310b9658d9f46fd748cca516cc48b6f2989389c22c42e9
+SHA512 (alsa-ucm-conf-1.2.1.tar.bz2) = 277e335fff02973628454aca4c8e275e49965cfe1b4a0bc7a6c4833ea14537b39f8175dd0c974577aa98c95e4f7f0981078d70f8a5f083f7c15ab2445f851255
+SHA512 (alsa-topology-conf-1.2.1.tar.bz2) = 3480e58f12aeca04b0c1821e074daeb369949acbcf7bc61b09895ee43de84cb716566518a56a4d681babbb3f13faace5a16fff079d8bdaefc7c27fc1382cd41a
+SHA512 (alsa-ucm-conf-1.2.1.2.tar.bz2) = e498c4355a765eb6ecd03f03611c8904f757bf73619a3c8159c044f80a4c3ab5cbd343692c227e13c6da307fc2e35259b4726902d3ab8e03eff11aa1c74027d5
+SHA512 (alsa-lib-1.2.1.2.tar.bz2) = e8286fd55f63ee0d95513279d0885c287533de89b7af6c338413dec5d38ba4f5a15da1a4a4ce36e052614e4b730e3778782dab9979d82958283be17b48604913

tests/run_tests.sh

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-# a quick PCM API test
-str=$(aplay -L | grep -E "^null$")
-if [ "$str" != "null" ]; then
-  echo "The 'null' pcm plugin was not found!"
-  exit 99
-fi

tests/tests.yml

@@ -1,11 +0,0 @@
-- hosts: localhost
-  roles:
-    - role: standard-test-basic
-      tags:
-        - classic
-      required_packages:
-        - alsa-utils
-      tests:
-        - simple:
-            dir: .
-            run: ./run_tests.sh