Merge branch 'rawhide' into f35

2021-11-15 18:25:59 +00:00 · 2021-10-17 22:51:54 +01:00 · 2021-10-04 19:03:27 +01:00 · 2021-10-04 08:20:34 +01:00 · 2021-09-15 15:34:17 +01:00 · 2021-09-15 15:30:06 +01:00
34 changed files with 1792 additions and 3313 deletions
--- a/0001-Fix-BeagleAI-detection.patch
+++ b/0001-Fix-BeagleAI-detection.patch
@ -0,0 +1,29 @@
+From 1849ef423238aeb1732eb3b8e67eb46bc21401c7 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 10 Sep 2020 14:24:12 +0100
+Subject: [PATCH] Fix BeagleAI detection
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ board/ti/am57xx/board.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
+index 7809875510..3232812a97 100644
+--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
+@@ -527,8 +527,10 @@ void do_board_detect(void)
+ 
+ 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ 				  CONFIG_EEPROM_CHIP_ADDRESS);
+-	if (rc)
+	if (rc) {
+ 		printf("ti_i2c_eeprom_init failed %d\n", rc);
+		ti_i2c_eeprom_am_set("BBONE-AI", "A");
+	}
+ 
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 	rc = board_bootmode_has_emmc();
+-- 
+2.26.2
+
--- a/0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch
+++ b/0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch
@ -0,0 +1,53 @@
+From 1c56fc2835e10cdc039a4c1d049c1a6978e036f3 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 22 Jul 2021 16:22:48 +0100
+Subject: [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi
+ memory ops"
+
+This reverts commit 346df7d4fa62afc578d820b3a18815eec765074f.
+
+This patch broke booting Rockchip systems from U-Boot residing on SPI
+flash, for at least the Pinebook Pro and Rockpro64, and also confirmed
+with the not yet upstream Helios64.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+Cc: T Karthik Reddy <t.karthik.reddy@xilinx.com>
+Cc: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
+Cc: Michal Simek <michal.simek@xilinx.com>
+Cc: Pratyush Yadav <p.yadav@ti.com>
+---
+ drivers/spi/spi-uclass.c | 11 -----------
+ 1 file changed, 11 deletions(-)
+
+diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
+index d867b27806..ec7f4652b3 100644
+--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
+@@ -11,7 +11,6 @@
+ #include <log.h>
+ #include <malloc.h>
+ #include <spi.h>
+-#include <spi-mem.h>
+ #include <dm/device_compat.h>
+ #include <asm/global_data.h>
+ #include <dm/device-internal.h>
+@@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus)
+ 			ops->set_mode += gd->reloc_off;
+ 		if (ops->cs_info)
+ 			ops->cs_info += gd->reloc_off;
+-		if (ops->mem_ops) {
+-			struct spi_controller_mem_ops *mem_ops =
+-				(struct spi_controller_mem_ops *)ops->mem_ops;
+-			if (mem_ops->adjust_op_size)
+-				mem_ops->adjust_op_size += gd->reloc_off;
+-			if (mem_ops->supports_op)
+-				mem_ops->supports_op += gd->reloc_off;
+-			if (mem_ops->exec_op)
+-				mem_ops->exec_op += gd->reloc_off;
+-		}
+ 		reloc_done++;
+ 	}
+ #endif
+-- 
+2.31.1
+
--- a/0001-enable-hs400-and-sdma-support.patch
+++ b/0001-enable-hs400-and-sdma-support.patch
@ -0,0 +1,158 @@
+From 42aa88db46fa88db52bbb5a96fc0eaebe695110e Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Mon, 30 Aug 2021 18:20:39 +0100
+Subject: [PATCH] enable hs400 and sdma support
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/firefly-rk3399_defconfig       | 2 ++
+ configs/nanopc-t4-rk3399_defconfig     | 2 ++
+ configs/nanopi-m4-2gb-rk3399_defconfig | 2 ++
+ configs/nanopi-m4-rk3399_defconfig     | 2 ++
+ configs/nanopi-m4b-rk3399_defconfig    | 2 ++
+ configs/nanopi-neo4-rk3399_defconfig   | 2 ++
+ configs/nanopi-r4s-rk3399_defconfig    | 2 ++
+ configs/pinebook-pro-rk3399_defconfig  | 1 +
+ configs/rock960-rk3399_defconfig       | 1 +
+ configs/rockpro64-rk3399_defconfig     | 2 ++
+ 10 files changed, 18 insertions(+)
+
+diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
+index 2ca2ac35e4..84ee690a2d 100644
+--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
+@@ -33,7 +33,9 @@ CONFIG_MISC=y
+ CONFIG_ROCKCHIP_EFUSE=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_SF_DEFAULT_SPEED=20000000
+ CONFIG_DM_ETH=y
+diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
+index a94f428def..722377803e 100644
+--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
+@@ -30,7 +30,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig
+index c9833fdb85..384d7da80c 100644
+--- a/configs/nanopi-m4-2gb-rk3399_defconfig
+++ b/configs/nanopi-m4-2gb-rk3399_defconfig
+@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
+index 2b2fcac366..b6b8ca8d3a 100644
+--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
+@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig
+index 6d3afe1b63..3f83877e0a 100644
+--- a/configs/nanopi-m4b-rk3399_defconfig
+++ b/configs/nanopi-m4b-rk3399_defconfig
+@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
+index 1bf5d1d095..6412cb2d7e 100644
+--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
+@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
+index 351d2eb553..7b527d47fa 100644
+--- a/configs/nanopi-r4s-rk3399_defconfig
+++ b/configs/nanopi-r4s-rk3399_defconfig
+@@ -29,7 +29,9 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
+index f97d5e872b..b0e68c9591 100644
+--- a/configs/pinebook-pro-rk3399_defconfig
+++ b/configs/pinebook-pro-rk3399_defconfig
+@@ -46,6 +46,7 @@ CONFIG_MISC=y
+ CONFIG_ROCKCHIP_EFUSE=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
+index 0233e0ea52..624d718f9f 100644
+--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
+@@ -36,6 +36,7 @@ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
+index ae11a8f5eb..b4e7e9700a 100644
+--- a/configs/rockpro64-rk3399_defconfig
+++ b/configs/rockpro64-rk3399_defconfig
+@@ -39,7 +39,9 @@ CONFIG_MISC=y
+ CONFIG_ROCKCHIP_EFUSE=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
+ CONFIG_SF_DEFAULT_BUS=1
+ CONFIG_SPI_FLASH_GIGADEVICE=y
+-- 
+2.31.1
+
--- a/ARM-bcm283x-change-the-virtual-address-of-the-XHCI-PCI-device-base.patch
+++ b/ARM-bcm283x-change-the-virtual-address-of-the-XHCI-PCI-device-base.patch
@ -0,0 +1,203 @@
+From patchwork Thu Jun 17 09:22:03 2021
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Marek Szyprowski <m.szyprowski@samsung.com>
+X-Patchwork-Id: 1493284
+X-Patchwork-Delegate: matthias.bgg@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Authentication-Results: ozlabs.org;
+	dkim=pass (1024-bit key;
+ unprotected) header.d=samsung.com header.i=@samsung.com header.a=rsa-sha256
+ header.s=mail20170921 header.b=S423zQBA;
+	dkim-atps=neutral
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
+	(No client certificate requested)
+	by ozlabs.org (Postfix) with ESMTPS id 4G5GmF2YYPz9s1l
+	for <incoming@patchwork.ozlabs.org>; Thu, 17 Jun 2021 19:22:21 +1000 (AEST)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 380E981E1C;
+	Thu, 17 Jun 2021 11:22:15 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=samsung.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=pass (1024-bit key;
+ unprotected) header.d=samsung.com header.i=@samsung.com header.b="S423zQBA";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 066B882024; Thu, 17 Jun 2021 11:22:14 +0200 (CEST)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.2 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH,
+ DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,RCVD_IN_MSPIKE_H3,
+ RCVD_IN_MSPIKE_WL,SPF_HELO_PASS autolearn=ham autolearn_force=no
+ version=3.4.2
+Received: from mailout2.w1.samsung.com (mailout2.w1.samsung.com
+ [210.118.77.12])
+ (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 791718020E
+ for <u-boot@lists.denx.de>; Thu, 17 Jun 2021 11:22:09 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=samsung.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=m.szyprowski@samsung.com
+Received: from eucas1p1.samsung.com (unknown [182.198.249.206])
+ by mailout2.w1.samsung.com (KnoxPortal) with ESMTP id
+ 20210617092208euoutp02306cccdadbd0a0fa3e360e9b40c870e4~JVDVFtPo90470104701euoutp02N
+ for <u-boot@lists.denx.de>; Thu, 17 Jun 2021 09:22:08 +0000 (GMT)
+DKIM-Filter: OpenDKIM Filter v2.11.0 mailout2.w1.samsung.com
+ 20210617092208euoutp02306cccdadbd0a0fa3e360e9b40c870e4~JVDVFtPo90470104701euoutp02N
+DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=samsung.com;
+ s=mail20170921; t=1623921728;
+ bh=g6sGWmD8hHxoWJS92fMYWdZG8PUB5T7hF5BCApkjjtQ=;
+ h=From:To:Cc:Subject:Date:References:From;
+ b=S423zQBAD3CJixEJMLt4LIue0UknKK6dcTJTYm0QESnzOGnr8JSiTSWbI42vYfeEr
+ uPY3rg88YpmiNYbY2UtEBDu9k20/SxO3xqChy69dH5g2tu3FlkC+Y9+355chFE9zhR
+ YtgdD6ME6PXoo6ju6YGnhtM4h3d1wOCBgZ8DRNHg=
+Received: from eusmges3new.samsung.com (unknown [203.254.199.245]) by
+ eucas1p2.samsung.com (KnoxPortal) with ESMTP id
+ 20210617092207eucas1p254ca42a27f671fd370b24d43d77bced7~JVDUqibou0517905179eucas1p28;
+ Thu, 17 Jun 2021 09:22:07 +0000 (GMT)
+Received: from eucas1p1.samsung.com ( [182.198.249.206]) by
+ eusmges3new.samsung.com (EUCPMTA) with SMTP id 97.82.09439.F341BC06; Thu, 17
+ Jun 2021 10:22:07 +0100 (BST)
+Received: from eusmtrp1.samsung.com (unknown [182.198.249.138]) by
+ eucas1p2.samsung.com (KnoxPortal) with ESMTPA id
+ 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79~JVDULHlNB0517805178eucas1p2x;
+ Thu, 17 Jun 2021 09:22:07 +0000 (GMT)
+Received: from eusmgms1.samsung.com (unknown [182.198.249.179]) by
+ eusmtrp1.samsung.com (KnoxPortal) with ESMTP id
+ 20210617092207eusmtrp1b3838c7f35a29ad48395199a93d03d9f~JVDUKaS5h2885128851eusmtrp1P;
+ Thu, 17 Jun 2021 09:22:07 +0000 (GMT)
+X-AuditID: cbfec7f5-c03ff700000024df-38-60cb143fddfe
+Received: from eusmtip2.samsung.com ( [203.254.199.222]) by
+ eusmgms1.samsung.com (EUCPMTA) with SMTP id 8C.31.08705.F341BC06; Thu, 17
+ Jun 2021 10:22:07 +0100 (BST)
+Received: from AMDC2765.digital.local (unknown [106.120.51.73]) by
+ eusmtip2.samsung.com (KnoxPortal) with ESMTPA id
+ 20210617092206eusmtip2389e23cf1a3074d360ad1974f6ed1b53~JVDTufYcj1280412804eusmtip2z;
+ Thu, 17 Jun 2021 09:22:06 +0000 (GMT)
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+To: u-boot@lists.denx.de
+Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Matthias Brugger
+ <mbrugger@suse.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Nicolas
+ Saenz Julienne <nsaenzjulienne@suse.de>, Jaehoon Chung
+ <jh80.chung@samsung.com>, Bartlomiej Zolnierkiewicz
+ <b.zolnierkie@samsung.com>
+Subject: [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI
+ device base
+Date: Thu, 17 Jun 2021 11:22:03 +0200
+Message-Id: <20210617092203.19825-1-m.szyprowski@samsung.com>
+X-Mailer: git-send-email 2.17.1
+X-Brightmail-Tracker: 
+ H4sIAAAAAAAAA+NgFrrDIsWRmVeSWpSXmKPExsWy7djPc7r2IqcTDB40GFtsnLGe1eLGrzZW
+ i7VH7rJbLJj8hNVi26zlbBaH37SzWrzd28nuwO5x9s4ORo++LasYPdZvucrisfl0dQBLFJdN
+ SmpOZllqkb5dAlfG+eermQqO8lT09y5naWC8xtXFyMkhIWAi0X/mMEsXIxeHkMAKRol9356w
+ dzFyADlfGCVuhkHEPzNKNNycywLT8G/nNkaIxHJGiaWdm1ghHKCGffe+sYNUsQkYSnS97WID
+ sUUEJCR+9V8F62AWmMkk0dw5kRUkISwQLvH7/2xGEJtFQFWib/cHsAZeAVuJl+e62SDWyUus
+ 3nCAGaRZQuAnu8Si7/sYIRIuEo+6V0LZwhKvjm9hh7BlJE5P7mGBaGhmlHh4bi07hNPDKHG5
+ aQZUh7XEnXO/2EA+ZRbQlFi/Sx/ElBBwlJg7gR/C5JO48VYQpJgZyJy0bTozRJhXoqNNCGKG
+ msSs4+vgth68cIkZwvaQuPd4Pdj5QgKxEkcOfWScwCg3C2HVAkbGVYziqaXFuempxcZ5qeV6
+ xYm5xaV56XrJ+bmbGIEJ4PS/4193MK549VHvECMTB+MhRgkOZiURXt3iEwlCvCmJlVWpRfnx
+ RaU5qcWHGKU5WJTEeXdtXRMvJJCeWJKanZpakFoEk2Xi4JRqYBJge2bX53WWz1Lf4MPq4pKd
+ L2Z7TUp3VDv2fwfHf6Y2rg5e979vjNICyxdMeW+qc0OHOVT8Q+3kj7qOC66fOsy4xb61uH4h
+ 951lnRF8exoM9TeGJ715tqduV6XnjaXVPyYtMn03k3MLb92nXs2vNxpuFebsiS62yarPnZ9d
+ ZPBOU0yvpoR307TFV/niSsVfeYrt4A/k1bB+WKXxd382MxdrGIvDrJUsCSsW7NglYTjXcVbO
+ 1bzaJ8lfWv7511UuqNvpJJ+093bvgWOlqbeVfjW2v3j+fP79PKeNgUle3dO622YUq2S4Cyh/
+ DZbd7mC8SedY8eZZfxdGrozhnGFmGj9nwTKzJQWb562Rl/9prMRSnJFoqMVcVJwIAFvDw65v
+ AwAA
+X-Brightmail-Tracker: 
+ H4sIAAAAAAAAA+NgFtrCLMWRmVeSWpSXmKPExsVy+t/xe7r2IqcTDNb0CFlsnLGe1eLGrzZW
+ i7VH7rJbLJj8hNVi26zlbBaH37SzWrzd28nuwO5x9s4ORo++LasYPdZvucrisfl0dQBLlJ5N
+ UX5pSapCRn5xia1StKGFkZ6hpYWekYmlnqGxeayVkamSvp1NSmpOZllqkb5dgl7G+eermQqO
+ 8lT09y5naWC8xtXFyMkhIWAi8W/nNsYuRi4OIYGljBJP/q5gh0jISJyc1sAKYQtL/LnWxQZR
+ 9IlRYs/8y2AJNgFDia63IAlODhEBCYlf/VfBJjELzGaSeL7iLhNIQlggVOL5jHVgDSwCqhJ9
+ uz+ANfAK2Eq8PNfNBrFBXmL1hgPMExh5FjAyrGIUSS0tzk3PLTbUK07MLS7NS9dLzs/dxAgM
+ vm3Hfm7ewTjv1Ue9Q4xMHIyHGCU4mJVEeHWLTyQI8aYkVlalFuXHF5XmpBYfYjQF2jeRWUo0
+ OR8Y/nkl8YZmBqaGJmaWBqaWZsZK4rxb566JFxJITyxJzU5NLUgtgulj4uCUamAyvS18MHIp
+ 7+EpilHuXy7d3MPzPnfRlSWnFr5+m5lzNSx03owzNw51LmK5Hv4vJ6nPlaHi3Ma1ZubH/23N
+ uHX0nlWi8bL9jxzLqptsE0+y961tVtRKuvD/QGJR1+3NeoUWKW7rH9pz89YdcnimPGWf7Jb/
+ fVnJZ6tdbPuu3nv29sWhteIKixdUX1rlHzUtVfyN0ILXawqfTJU7/SR/jtrSjMpvufKfZKb+
+ 3b1sW2hkU2aN9VuDk+52mbFrb3P/1LzhsN309FfG24tY3TjtzFaLf35WI6rUZiAa8lNEtFJE
+ 1a9l8zLRs3wbm574XwmsP111UPfxm4q0yHKuE6GbZm1T/LfpzOkcP6Yg1r+3Vmy8osRSnJFo
+ qMVcVJwIAKDUsMjHAgAA
+X-CMS-MailID: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79
+X-Msg-Generator: CA
+X-RootMTR: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79
+X-EPHeader: CA
+CMS-TYPE: 201P
+X-CMS-RootMailID: 20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79
+References: 
+ <CGME20210617092207eucas1p2fba39144e5d4890a23ba70f794a25b79@eucas1p2.samsung.com>
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.2 at phobos.denx.de
+X-Virus-Status: Clean
+
+Move the XHCI PCI device base up in the virtual address space. This fixes
+initialization failure observed with newer Raspberry Pi firmware, later
+than 63b1922311 ("firmware: arm_loader: Update armstubs with those from
+PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base
+conflicts with the updated ARM/VideoCore firmware.
+
+This also requires to reduce the size of the mapped PCI device region
+from 8MiB to 4MiB to fit into 32bit address space. This is still enough
+for the XHCI PCI device.
+
+Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
+Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
+Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
+Tested-by: Stefan Agner <stefan@agner.ch>
+---
+This fixes the issue observed on ARM 32bit after upgrading the RPi4
+firmware files, described some time ago here:
+https://lists.denx.de/pipermail/u-boot/2021-February/442317.html
+---
+ arch/arm/mach-bcm283x/init.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
+index 49027ce0a2..9803499985 100644
+--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
+@@ -14,7 +14,7 @@
+ #include <asm/global_data.h>
+ 
+ #define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS	0x600000000UL
+-#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x400000UL
+ 
+ #ifdef CONFIG_ARM64
+ #include <asm/armv8/mmu.h>
+@@ -148,7 +148,7 @@ int mach_cpu_init(void)
+ 
+ #ifdef CONFIG_ARMV7_LPAE
+ #ifdef CONFIG_TARGET_RPI_4_32B
+-#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xff800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xffc00000UL
+ #include <addr_map.h>
+ #include <asm/system.h>
+ 
--- a/AllWinner-PineTab.patch
+++ b/AllWinner-PineTab.patch
@ -0,0 +1,45 @@
+From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 14 Apr 2020 09:53:07 +0100
+Subject: [PATCH 9/9] initial pinetab support
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+ create mode 100644 configs/pinetab_defconfig
+
+diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig
+new file mode 100644
+index 0000000000..5b9620f3e5
+--- /dev/null
+++ b/configs/pinetab_defconfig
+@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=3881949
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_USE_PREBOOT=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab"
+CONFIG_OF_LIST="sun50i-a64-pinetab"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_SUNXI=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+-- 
+2.26.0
--- a/Allwinner-fix-booting-on-a-number-of-devices.patch
+++ b/Allwinner-fix-booting-on-a-number-of-devices.patch
@ -1,27 +0,0 @@
-From b8ea3cebde98866b7cbb4e8f9bb6dfdee529a549 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 27 Aug 2025 00:23:28 +0100
-Subject: [PATCH] Allwinner: fix booting on a number of devices
-
-Revert "sunxi: enable MMU_PGPROT proper page table protection"
-
-This reverts commit 16cfccda4dbf0b53473b8212897f5c63bfbeb6e1.
---
- arch/arm/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 40368abc297..b8be270e4d7 100644
--- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1207,7 +1207,6 @@ config ARCH_SUNXI
- 	select DM_SPI_FLASH if SPI && MTD
- 	select DM_KEYBOARD
- 	select DM_SERIAL
-	select MMU_PGPROT if ARM64
- 	select OF_BOARD_SETUP
- 	select OF_CONTROL
- 	select PINCTRL
-- 
-2.51.0
-
--- a/Fix-NVMe-not-only-on-Raspberry-Pi-5.patch
+++ b/Fix-NVMe-not-only-on-Raspberry-Pi-5.patch
@ -1,405 +0,0 @@
-From patchwork Mon Jul  6 17:21:47 2026
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
-X-Patchwork-Id: 2265604
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=85.214.62.61; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384)
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB431Qwzz1xqc
-	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:21:55 +1000 (AEST)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 179C084942;
-	Mon,  6 Jul 2026 19:21:52 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 82ADE8490A; Mon,  6 Jul 2026 19:21:51 +0200 (CEST)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
- RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
- autolearn_force=no version=3.4.2
-Received: from verein.lst.de (verein.lst.de [213.95.11.211])
- (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 9F24C846B4
- for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:49 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
-Received: by verein.lst.de (Postfix, from userid 2005)
- id C934268B05; Mon,  6 Jul 2026 19:21:47 +0200 (CEST)
-In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
-References: <20260706172028.C148E68BEB@verein.lst.de>
-Subject: [PATCH v2 1/4] core: Skip parent device nodes without a DT reference
- when looking for dma-ranges
-To: Neil Armstrong <neil.armstrong@linaro.org>,
- Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
- Simon Glass <sjg@chromium.org>
-Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
- Peter Robinson <pbrobinson@gmail.com>,
- Mattijs Korpershoek <mkorpershoek@kernel.org>,
- Marek Vasut <marek.vasut+renesas@mailbox.org>,
- Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
- "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
- Martin Schwan <m.schwan@phytec.de>,
- "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
- Prashant Kamble <prashant.kamble223@gmail.com>,
- Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
- u-boot@lists.denx.de
-Message-Id: <20260706172147.C934268B05@verein.lst.de>
-Date: Mon,  6 Jul 2026 19:21:47 +0200 (CEST)
-From: duwe@lst.de (Torsten Duwe)
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-From: Torsten Duwe <duwe@suse.de>
-
-If a device node got created dynamically, there is no guarantee that the
-parent node has an associated device tree node which could specify dma
-constraints. Especially PCI(e) enumeration adds intermediate "bus nodes",
-also dynamically.
-
-Try harder to find the correct configuration by walking up the tree until
-a DT association is found.
-
-Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
-Signed-off-by: Torsten Duwe <duwe@suse.de>
-Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
-Tested-by: Peter Robinson <pbrobinson@gmail.com>
---
- drivers/core/device.c | 14 +++++++++++++-
- 1 file changed, 13 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/core/device.c b/drivers/core/device.c
-index d365204ba11..b6d00cf4714 100644
--- a/drivers/core/device.c
-+++ b/drivers/core/device.c
-@@ -459,7 +459,19 @@ static int device_get_dma_constraints(struct udevice *dev)
- 	u64 size = 0;
- 	int ret;
- 
-	if (!CONFIG_IS_ENABLED(DM_DMA) || !parent || !dev_has_ofnode(parent))
-+	if (!CONFIG_IS_ENABLED(DM_DMA) || !parent)
-+		return 0;
-+
-+	/* Look for the first node in the parent chain */
-+	while (parent) {
-+		if (dev_has_ofnode(parent))
-+			break;
-+
-+		parent = dev_get_parent(parent);
-+	}
-+
-+	/* No parents have a node, bail out */
-+	if (!parent)
- 		return 0;
- 
- 	/*
-
-From patchwork Mon Jul  6 17:21:50 2026
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
-X-Patchwork-Id: 2265605
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange x25519)
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB481pfXz1xqc
-	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:22:00 +1000 (AEST)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 9A59684994;
-	Mon,  6 Jul 2026 19:21:55 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Received: by phobos.denx.de (Postfix, from userid 109)
- id EB7D384979; Mon,  6 Jul 2026 19:21:53 +0200 (CEST)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
- RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
- autolearn_force=no version=3.4.2
-Received: from verein.lst.de (verein.lst.de [213.95.11.211])
- (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id EE61C846B4
- for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:51 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
-Received: by verein.lst.de (Postfix, from userid 2005)
- id 464E868BEB; Mon,  6 Jul 2026 19:21:50 +0200 (CEST)
-In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
-References: <20260706172028.C148E68BEB@verein.lst.de>
-Subject: [PATCH v2 2/4] test: Add a unit test in phys_to_bus for dynamically
- created device nodes
-To: Neil Armstrong <neil.armstrong@linaro.org>,
- Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
- Simon Glass <sjg@chromium.org>
-Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
- Peter Robinson <pbrobinson@gmail.com>,
- Mattijs Korpershoek <mkorpershoek@kernel.org>,
- Marek Vasut <marek.vasut+renesas@mailbox.org>,
- Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
- "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
- Martin Schwan <m.schwan@phytec.de>,
- "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
- Prashant Kamble <prashant.kamble223@gmail.com>,
- Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
- u-boot@lists.denx.de
-Message-Id: <20260706172150.464E868BEB@verein.lst.de>
-Date: Mon,  6 Jul 2026 19:21:50 +0200 (CEST)
-From: duwe@lst.de (Torsten Duwe)
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-From: Torsten Duwe <duwe@suse.de>
-
-In order to test whether device_get_dma_constraints() is now able to skip
-device nodes without a DT association, temporarily remove those on 2 newly-
-created nodes.
-
-Signed-off-by: Torsten Duwe <duwe@suse.de>
---
-
-This test indeed makes a different whether the previous change is
-applied or not, but *only* reliably for the non-flat-tree case (!?).
-On the flat tree, it always fails after (reverse) applying it.
-
-Either the previous patch is incomplete, or, more likely, the test
-assumptions here are not all valid. Suggestions welcome (especially
-how to create device nodes from a device tree without a reference to
-their origin ;-)
-
---
- arch/sandbox/dts/test.dts |  9 +++++++++
- test/dm/phys2bus.c        | 25 ++++++++++++++++++++++++-
- 2 files changed, 33 insertions(+), 1 deletion(-)
-
-diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
-index 0887de4333b..1d92e85c739 100644
--- a/arch/sandbox/dts/test.dts
-+++ b/arch/sandbox/dts/test.dts
-@@ -656,6 +656,15 @@
- 		subnode@0 {
- 			compatible = "denx,u-boot-fdt-test";
- 		};
-+		bus@7 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			compatible = "denx,u-boot-test-bus";
-+
-+			subnode@8 {
-+				  compatible = "denx,u-boot-fdt-test";
-+			};
-+		};
- 	};
- 
- 	mmio-bus@1 {
-diff --git a/test/dm/phys2bus.c b/test/dm/phys2bus.c
-index 67f33904943..858ed5410e2 100644
--- a/test/dm/phys2bus.c
-+++ b/test/dm/phys2bus.c
-@@ -15,7 +15,8 @@
- 
- static int dm_test_phys_to_bus(struct unit_test_state *uts)
- {
-	struct udevice *dev;
-+	struct udevice *dev, *pdev;
-+	ofnode psave, nsave;
- 	ofnode node;
- 
- 	node = ofnode_path("/mmio-bus@0");
-@@ -31,6 +32,29 @@ static int dm_test_phys_to_bus(struct unit_test_state *uts)
- 	ut_asserteq_addr((void*)0x1003ffffULL, (void*)dev_phys_to_bus(dev, 0x3ffff));
- 	ut_asserteq_addr((void*)0x3ffffULL, (void*)(ulong)dev_bus_to_phys(dev, 0x1003ffff));
- 
-+#if CONFIG_IS_ENABLED(OF_REAL)
-+	/* dma-ranges are on the grandparent bus node,
-+	 *  OF nodes neither here nor at parent
-+	 */
-+	node = ofnode_path("/mmio-bus@0/bus@7");
-+	ut_assert(ofnode_valid(node));
-+	ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_BUS, node, &pdev));
-+
-+	/* pretend the devices were discovered dynamically and have no OF node */
-+	psave = pdev->node_;
-+	pdev->node_.np = NULL;
-+	node = ofnode_path("/mmio-bus@0/bus@7/subnode@8");
-+	ut_assert(ofnode_valid(node));
-+	nsave = dev->node_;
-+	dev->node_.np = NULL;
-+	ut_assertok(uclass_get_device_by_ofnode(UCLASS_TEST_FDT, node, &dev));
-+
-+	ut_asserteq_addr((void *)0x1003ffffULL, (void *)dev_phys_to_bus(dev, 0x3ffff));
-+	ut_asserteq_addr((void *)0x3ffffULL, (void *)(ulong)dev_bus_to_phys(dev, 0x1003ffff));
-+
-+	pdev->node_ = psave;
-+	dev->node_ = nsave;
-+#endif
- 	return 0;
- }
- DM_TEST(dm_test_phys_to_bus, UTF_SCAN_PDATA | UTF_SCAN_FDT);
-
-From patchwork Mon Jul  6 17:21:54 2026
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Torsten Duwe <duwe@lst.de>
-X-Patchwork-Id: 2265607
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange x25519)
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4gvB4R378Lz1xqc
-	for <incoming@patchwork.ozlabs.org>; Tue, 07 Jul 2026 03:22:15 +1000 (AEST)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 3FDAE8490A;
-	Mon,  6 Jul 2026 19:21:59 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 17F418490A; Mon,  6 Jul 2026 19:21:58 +0200 (CEST)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,
- RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham
- autolearn_force=no version=3.4.2
-Received: from verein.lst.de (verein.lst.de [213.95.11.211])
- (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 1D593849A4
- for <u-boot@lists.denx.de>; Mon,  6 Jul 2026 19:21:56 +0200 (CEST)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=lst.de
-Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=duwe@lst.de
-Received: by verein.lst.de (Postfix, from userid 2005)
- id B506B68CFE; Mon,  6 Jul 2026 19:21:54 +0200 (CEST)
-In-Reply-To: <20260706172028.C148E68BEB@verein.lst.de>
-References: <20260706172028.C148E68BEB@verein.lst.de>
-Subject: [PATCH v2 4/4] configs: enable NVMe
-To: Neil Armstrong <neil.armstrong@linaro.org>,
- Andrew Goodbody <andrew.goodbody@linaro.org>, Bin Meng <bmeng.cn@gmail.com>,
- Simon Glass <sjg@chromium.org>
-Cc: Tom Rini <trini@konsulko.com>, Matthias Brugger <mbrugger@suse.com>,
- Peter Robinson <pbrobinson@gmail.com>,
- Mattijs Korpershoek <mkorpershoek@kernel.org>,
- Marek Vasut <marek.vasut+renesas@mailbox.org>,
- Heiko Schocher <hs@nabladev.com>, Svyatoslav Ryhel <clamor95@gmail.com>,
- "Lucien.Jheng" <lucienzx159@gmail.com>, Rasmus Villemoes <ravi@prevas.dk>,
- Martin Schwan <m.schwan@phytec.de>,
- "Markus Schneider-Pargmann (TI.com)" <msp@baylibre.com>,
- Prashant Kamble <prashant.kamble223@gmail.com>,
- Denis Mukhin <dmukhin@ford.com>, Sughosh Ganu <sughosh.ganu@arm.com>,
- u-boot@lists.denx.de
-Message-Id: <20260706172154.B506B68CFE@verein.lst.de>
-Date: Mon,  6 Jul 2026 19:21:54 +0200 (CEST)
-From: duwe@lst.de (Torsten Duwe)
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-From: Torsten Duwe <duwe@suse.de>
-
-Enable NVMe in the Raspberry Pi 64-Bit default config and scan for devices.
-
-Signed-off-by: Torsten Duwe <duwe@suse.de>
-Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
-Tested-by: Peter Robinson <pbrobinson@gmail.com>
---
- configs/rpi_arm64_defconfig | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
-index cdcf05ea6db..fb0fdce1d7f 100644
--- a/configs/rpi_arm64_defconfig
-+++ b/configs/rpi_arm64_defconfig
-@@ -16,7 +16,7 @@ CONFIG_BOOTSTD_DEFAULTS=y
- CONFIG_OF_BOARD_SETUP=y
- CONFIG_FDT_SIMPLEFB=y
- CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="pci enum; usb start;"
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_SYS_PBSIZE=1049
- # CONFIG_DISPLAY_CPUINFO is not set
- # CONFIG_DISPLAY_BOARDINFO is not set
-@@ -44,6 +44,7 @@ CONFIG_MMC_SDHCI_SDMA=y
- CONFIG_MMC_SDHCI_BCM2835=y
- CONFIG_MMC_SDHCI_BCMSTB=y
- CONFIG_BCMGENET=y
-+CONFIG_NVME_PCI=y
- CONFIG_PCI_BRCMSTB=y
- CONFIG_PINCTRL=y
- # CONFIG_PINCTRL_GENERIC is not set
--- a/JetsonTX2-Fix-upstream-device-tree-naming.patch
+++ b/JetsonTX2-Fix-upstream-device-tree-naming.patch
@ -1,50 +0,0 @@
-From 4ee5ba36570d94ce27e4023f15b8b3a6b8b9daf9 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 13 Oct 2025 21:41:13 +0100
-Subject: [PATCH] config: JetsonTX2: Fix upstream device tree naming
-
-The upstream naming for the Jetson TX2 is p2771-0000 so fix
-the device tree name so the firmware will find the right
-name on disk.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- arch/arm/dts/Makefile                                           | 2 +-
- .../{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts}    | 0
- configs/p2771-0000-500_defconfig                                | 2 +-
- 3 files changed, 2 insertions(+), 2 deletions(-)
- rename arch/arm/dts/{tegra186-p2771-0000-500.dts => tegra186-p2771-0000.dts} (100%)
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 7c8cf3a5a1d..86a7b4fda35 100644
--- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -134,7 +134,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += \
- 	tegra124-venice2.dtb \
- 	tegra124-xiaomi-mocha.dtb \
- 	tegra186-p2771-0000-000.dtb \
-	tegra186-p2771-0000-500.dtb \
-+	tegra186-p2771-0000.dtb \
- 	tegra210-p2371-0000.dtb \
- 	tegra210-p2371-2180.dtb \
- 	tegra210-p2571.dtb \
-diff --git a/arch/arm/dts/tegra186-p2771-0000-500.dts b/arch/arm/dts/tegra186-p2771-0000.dts
-similarity index 100%
-rename from arch/arm/dts/tegra186-p2771-0000-500.dts
-rename to arch/arm/dts/tegra186-p2771-0000.dts
-diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
-index 42043277e2d..e1e5c47ddfa 100644
--- a/configs/p2771-0000-500_defconfig
-+++ b/configs/p2771-0000-500_defconfig
-@@ -7,7 +7,7 @@ CONFIG_TEXT_BASE=0x80080000
- CONFIG_NR_DRAM_BANKS=1026
- CONFIG_ENV_SIZE=0x2000
- CONFIG_ENV_OFFSET=0xFFFFE000
-CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500"
-+CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000"
- CONFIG_SYS_BOOTM_LEN=0x800000
- CONFIG_SYS_LOAD_ADDR=0x80080000
- CONFIG_TEGRA186=y
-- 
-2.51.0
-
--- a/USB-PD-TCPM-improvements.patch
+++ b/USB-PD-TCPM-improvements.patch
@ -1,717 +0,0 @@
-From patchwork Wed Feb 26 18:44:44 2025
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
-X-Patchwork-Id: 2052544
-X-Patchwork-Delegate: marek.vasut@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.a=rsa-sha256 header.s=mail header.b=IthL1Z+m;
-	dkim-atps=neutral
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature ECDSA (secp384r1))
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M03Hhjz1yCp
-	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:32 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id BFF7680FF0;
-	Wed, 26 Feb 2025 19:45:16 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Authentication-Results: phobos.denx.de;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.b="IthL1Z+m";
-	dkim-atps=neutral
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 7614F810F9; Wed, 26 Feb 2025 19:45:13 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
- DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
- SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
-Received: from bali.collaboradmins.com (bali.collaboradmins.com
- [IPv6:2a01:4f8:201:9162::2])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 2173180FDE
- for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
- s=mail; t=1740595507;
- bh=Fnp6a8opSCXiH5NJdu5uivbBBZF3pe1CXyluh8+n8/c=;
- h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
- b=IthL1Z+mDeIRy9MWEa0lGyJWuHk/Pu+yUpLly7RG6NIpC0lCgla3ssiy2x+8/G+bz
- DWjrKUMxgWtqfjfffRiKEJZ6Z2sAXJ1ePvDmMtbGoolWSrzsV2+cWh0byYrEBuVBe9
- Vp0ye7gJ4Wt610s4QHa4xoYcm7h9KGmE3IEjb+XYFv1HMJIOoACl04BwkLctza1KBr
- XlIqC+snvRP/yQxa2+6RYGXgQD5JnJxCM1orXVIJxyyJxTzb3XgNir60Gb4HI9724H
- LDZy0Hq7NQ1zF0h1yVUOklDotw17isbNoI4K3JCExR+r7GsdESsGY6cwAbZY71iWlf
- OsSSrV6TZtAMg==
-Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
- [91.249.76.32])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
- key-exchange X25519 server-signature RSA-PSS (4096 bits))
- (No client certificate requested) (Authenticated sender: sre)
- by bali.collaboradmins.com (Postfix) with ESMTPSA id A18CC17E0881;
- Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-Received: by jupiter.universe (Postfix, from userid 1000)
- id 32E35480034; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-From: Sebastian Reichel <sebastian.reichel@collabora.com>
-To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
- Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
-Cc: Tim Harvey <tharvey@gateworks.com>,
- Philipp Tomsich <philipp.tomsich@vrull.eu>,
- Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
- Sebastian Reichel <sebastian.reichel@collabora.com>
-Subject: [PATCH v2 1/4] usb: tcpm: improve handling of some power-supplies
-Date: Wed, 26 Feb 2025 19:44:44 +0100
-Message-ID: <20250226184506.64114-2-sebastian.reichel@collabora.com>
-X-Mailer: git-send-email 2.47.2
-In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-When the Rock 5B is booted with the current TCPM with its power supplied
-by a "Cambrionix PDSync-C4" port it reaches the power-supply ready state.
-Once that has happened the hub starts sending GetSinkCap messages, but
-U-Boot already stopped processing PD messages. After retrying a bunch of
-times the hub instead sends soft resets. Since U-Boot will also not
-react to them, the USB hub will follow-up with a hard reset and that
-cuts off the supply voltage.
-
-Since the state machine is already prepared to handle GetSinkCap
-messages, try to avoid this by handling incoming messages for another
-50ms after reaching the ready state.
-
-Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
- drivers/usb/tcpm/tcpm.c | 31 ++++++++++++++++++++++++++-----
- 1 file changed, 26 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
-index 0aee57cb2f4a..b754b4dcd0b5 100644
--- a/drivers/usb/tcpm/tcpm.c
-+++ b/drivers/usb/tcpm/tcpm.c
-@@ -2229,6 +2229,17 @@ static int tcpm_port_init(struct udevice *dev)
- 	return 0;
- }
- 
-+static inline void tcpm_poll_one_event(struct udevice *dev)
-+{
-+	const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev);
-+	struct tcpm_port *port = dev_get_uclass_plat(dev);
-+
-+	drvops->poll_event(dev);
-+	port->poll_event_cnt++;
-+	udelay(500);
-+	tcpm_check_and_run_delayed_work(dev);
-+}
-+
- static void tcpm_poll_event(struct udevice *dev)
- {
- 	const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev);
-@@ -2242,15 +2253,25 @@ static void tcpm_poll_event(struct udevice *dev)
- 		    (port->state == SNK_READY || port->state == SRC_READY))
- 			break;
- 
-		drvops->poll_event(dev);
-		port->poll_event_cnt++;
-		udelay(500);
-		tcpm_check_and_run_delayed_work(dev);
-+		tcpm_poll_one_event(dev);
- 	}
- 
-	if (port->state != SNK_READY && port->state != SRC_READY)
-+	/*
-+	 * Some power-supplies send GetSinkCap shortly after they are ready.
-+	 * If they do not receive a response after a few retries they will issue
-+	 * a soft-reset followed by a hard reset, which kills the board power.
-+	 * Let's poll for 50ms after reaching the ready state to check if the
-+	 * power-supply wants something from us.
-+	 */
-+	if (port->state == SNK_READY) {
-+		port->poll_event_cnt = 0;
-+
-+		while (port->poll_event_cnt < 100)
-+			tcpm_poll_one_event(dev);
-+	} else {
- 		dev_warn(dev, "TCPM: exit in state %s\n",
- 			 tcpm_states[port->state]);
-+	}
- 
- 	/*
- 	 * At this time, call the callback function of the respective pd chip
-
-From patchwork Wed Feb 26 18:44:45 2025
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
-X-Patchwork-Id: 2052546
-X-Patchwork-Delegate: marek.vasut@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.a=rsa-sha256 header.s=mail header.b=hgX6o5vZ;
-	dkim-atps=neutral
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature ECDSA (secp384r1))
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33MJ5sFGz1yCp
-	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:48 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 69A29811C5;
-	Wed, 26 Feb 2025 19:45:17 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Authentication-Results: phobos.denx.de;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.b="hgX6o5vZ";
-	dkim-atps=neutral
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 832B180FB9; Wed, 26 Feb 2025 19:45:14 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
- DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
- RCVD_IN_VALIDITY_RPBL_BLOCKED,RCVD_IN_VALIDITY_SAFE_BLOCKED,
- SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
-Received: from bali.collaboradmins.com (bali.collaboradmins.com
- [148.251.105.195])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 2178380FF0
- for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
- s=mail; t=1740595507;
- bh=H/gQCZCWVmLNRIaBLvWsE35SaDMWvta2+rTkymkHQJE=;
- h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
- b=hgX6o5vZwM72CR2hgo76tgo2eE00qHM7oNja381ACl8gIUUVioy8RTeqXtum89tBf
- aIwKm/oNQNvGxy92pX5/1Jg/MwYZKS8jDukz6ZgsLKu22rJXf58FFoV095AcEkUMB2
- lrO4KJgFW/x1FK8GmSVSXXH+iUYJLkzsfZKgHKoQYHZcVXJRgFjHR5ytGKsA/fq4el
- 7Wrx3lmLNjL7fYlDF5AyY+Wl6hqzjDq58nFedXHv8TEHx6fzfB0IBzOL/F8bGqVcyy
- lal7bjJvMPoA9zfgIC77R1neWktg5FSro75YciSRSj9lmMNCmESnSPCgsZ4wBW0V6f
- ppD77gOtjDfLQ==
-Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
- [91.249.76.32])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
- key-exchange X25519 server-signature RSA-PSS (4096 bits))
- (No client certificate requested) (Authenticated sender: sre)
- by bali.collaboradmins.com (Postfix) with ESMTPSA id 9725D17E087F;
- Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-Received: by jupiter.universe (Postfix, from userid 1000)
- id 34511480037; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-From: Sebastian Reichel <sebastian.reichel@collabora.com>
-To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
- Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
-Cc: Tim Harvey <tharvey@gateworks.com>,
- Philipp Tomsich <philipp.tomsich@vrull.eu>,
- Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
- Sebastian Reichel <sebastian.reichel@collabora.com>
-Subject: [PATCH v2 2/4] usb: tcpm: avoid resets for missing source capability
- messages
-Date: Wed, 26 Feb 2025 19:44:45 +0100
-Message-ID: <20250226184506.64114-3-sebastian.reichel@collabora.com>
-X-Mailer: git-send-email 2.47.2
-In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-The current TCPM code implements source capability message handling
-according to the USB-PD specification. Unfortunately some USB PD
-sources do not properly follow the specification and do not send
-source capability messages after a soft reset when they already
-negotiated a specific contract before. The currently implemented way
-(and what is described in the specificiation) to resolve this problem
-is triggering a hard reset.
-
-But a hard reset is fatal on batteryless platforms powered via USB-C PD,
-since that removes VBUS for some time. Since this is triggered at boot
-time, the system may get stuck in a boot loop.
-
-For example I noticed the following behaviour on a Radxa Rock 5B
-combined with an affected power-supply:
-
-1. The system is booted up with current code
-2. A reboot is requested
-3. U-Boot TCPM / fusb302 driver sends soft reset and waits for the
-   source capability message
-4. No new source capability message is send by the power-supply
-   after the soft reset
-5. U-Boot sends a hard reset
-6. The board resets, but the fusb302 registers are not reset. This
-   is because of a hardware glitch. The serial pins are high when
-   no data is exchanged. Apparently the RK3588 has protection diodes,
-   which leak some voltage into the power-domain. The Rock 5B serial
-   pins and the fusb302 are using the same 3.3V power domain and the
-   leaked voltage is enough to keep the fusb302 registers alive.
-7. After the hard reset the power-supply sends another source capability
-   message, which is auto-acked by fusb302 (because the register state
-   is kept) even though the U-Boot driver has not yet probed. Once the
-   U-Boot driver probes it sends another soft reset and waits for a new
-   source capability message, which never arrives.
-
-Fortunately the affected power-supplies (I have two setups showing this
-behaviour) support sending a source capability message when explicitly
-being asked. Thus an easy workaround to handle this is deviating from
-the USB-PD specification and sending a Get_Source_Cap message and
-waiting some time longer before doing the hard reset.
-
-Note, that I recently added the same workaround to the Linux kernel
-with a slightly different rationale (since it needs to take over from
-U-Boot).
-
-Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
- drivers/usb/tcpm/tcpm-internal.h |  1 +
- drivers/usb/tcpm/tcpm.c          | 32 +++++++++++++++++++++++++++++---
- 2 files changed, 30 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/usb/tcpm/tcpm-internal.h b/drivers/usb/tcpm/tcpm-internal.h
-index 561442090027..4861f4d13866 100644
--- a/drivers/usb/tcpm/tcpm-internal.h
-+++ b/drivers/usb/tcpm/tcpm-internal.h
-@@ -30,6 +30,7 @@
- 	S(SNK_DISCOVERY_DEBOUNCE),		\
- 	S(SNK_DISCOVERY_DEBOUNCE_DONE),		\
- 	S(SNK_WAIT_CAPABILITIES),		\
-+	S(SNK_WAIT_CAPABILITIES_TIMEOUT),	\
- 	S(SNK_NEGOTIATE_CAPABILITIES),		\
- 	S(SNK_TRANSITION_SINK),			\
- 	S(SNK_TRANSITION_SINK_VBUS),		\
-diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
-index b754b4dcd0b5..786d92fa4c6f 100644
--- a/drivers/usb/tcpm/tcpm.c
-+++ b/drivers/usb/tcpm/tcpm.c
-@@ -1424,7 +1424,8 @@ static inline enum tcpm_state hard_reset_state(struct tcpm_port *port)
- 		return ERROR_RECOVERY;
- 	if (port->pwr_role == TYPEC_SOURCE)
- 		return SRC_UNATTACHED;
-	if (port->state == SNK_WAIT_CAPABILITIES)
-+	if (port->state == SNK_WAIT_CAPABILITIES ||
-+	    port->state == SNK_WAIT_CAPABILITIES_TIMEOUT)
- 		return SNK_READY;
- 	return SNK_UNATTACHED;
- }
-@@ -1650,10 +1651,35 @@ static void run_state_machine(struct udevice *dev)
- 			tcpm_set_state(dev, SOFT_RESET_SEND,
- 				       PD_T_SINK_WAIT_CAP);
- 		} else {
-			tcpm_set_state(dev, hard_reset_state(port),
-				       PD_T_SINK_WAIT_CAP);
-+			if (!port->self_powered)
-+				tcpm_set_state(dev, SNK_WAIT_CAPABILITIES_TIMEOUT,
-+					       PD_T_SINK_WAIT_CAP);
-+			else
-+				tcpm_set_state(dev, hard_reset_state(port),
-+					       PD_T_SINK_WAIT_CAP);
- 		}
- 		break;
-+	case SNK_WAIT_CAPABILITIES_TIMEOUT:
-+		/*
-+		 * There are some USB PD sources in the field, which do not
-+		 * properly implement the specification and fail to start
-+		 * sending Source Capability messages after a soft reset. The
-+		 * specification suggests to do a hard reset when no Source
-+		 * capability message is received within PD_T_SINK_WAIT_CAP,
-+		 * but that might effectively kil the machine's power source.
-+		 *
-+		 * This slightly diverges from the specification and tries to
-+		 * recover from this by explicitly asking for the capabilities
-+		 * using the Get_Source_Cap control message before falling back
-+		 * to a hard reset. The control message should also be supported
-+		 * and handled by all USB PD source and dual role devices
-+		 * according to the specification.
-+		 */
-+		if (tcpm_pd_send_control(dev, PD_CTRL_GET_SOURCE_CAP))
-+			tcpm_set_state_cond(dev, hard_reset_state(port), 0);
-+		else
-+			tcpm_set_state(dev, hard_reset_state(port), PD_T_SINK_WAIT_CAP);
-+		break;
- 	case SNK_NEGOTIATE_CAPABILITIES:
- 		port->pd_capable = true;
- 		port->hard_reset_count = 0;
-
-From patchwork Wed Feb 26 18:44:46 2025
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
-X-Patchwork-Id: 2052545
-X-Patchwork-Delegate: marek.vasut@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.a=rsa-sha256 header.s=mail header.b=BxTv7Lfo;
-	dkim-atps=neutral
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=85.214.62.61; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384)
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33M971h7z1yCp
-	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:41 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 1B09C8118B;
-	Wed, 26 Feb 2025 19:45:17 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Authentication-Results: phobos.denx.de;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.b="BxTv7Lfo";
-	dkim-atps=neutral
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 4399E810F9; Wed, 26 Feb 2025 19:45:14 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
- DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
- SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
-Received: from bali.collaboradmins.com (bali.collaboradmins.com
- [IPv6:2a01:4f8:201:9162::2])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 2163F80FB9
- for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
- s=mail; t=1740595507;
- bh=7OaDpd2idE5ETWAiOZte0kuOU6ZYitEVWkDgDmqaQU8=;
- h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
- b=BxTv7LfoAae43YSXPquVPmmwStgQirXCxaSBD0fo554R5O/si/Iif5L+zXXJocATJ
- z7+I7ZKbknkTeVyzoRDCXvXIVz2bFdTRWQN4Z2iwJbVI1covAv/Gn4wIE2Q6hbNKbU
- qV5AKg7gvrKkbztbo7N9bHNjkrlAbd8B4Ew3SR8FM46DMAOwNzVsoX3rLMcPtlWzHj
- 4OBKCx22H/4ASIWjMbYoDE09DyQ+CPOf8JcX8OPwFcH9j6vW6cEWvyjiAyDj6LnwOq
- KD+ZYVIkWhkIzAkE2NHB2IpA4xlxW8i18BJzNBD8N1eBx/HCgb0camb4KanY1Hta/d
- 4ipLyuFaCkMog==
-Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
- [91.249.76.32])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
- key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
- SHA256)
- (No client certificate requested) (Authenticated sender: sre)
- by bali.collaboradmins.com (Postfix) with ESMTPSA id 816AA17E0861;
- Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-Received: by jupiter.universe (Postfix, from userid 1000)
- id 361F2480038; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-From: Sebastian Reichel <sebastian.reichel@collabora.com>
-To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
- Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
-Cc: Tim Harvey <tharvey@gateworks.com>,
- Philipp Tomsich <philipp.tomsich@vrull.eu>,
- Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
- Sebastian Reichel <sebastian.reichel@collabora.com>
-Subject: [PATCH v2 3/4] usb: tcpm: print error on hard reset
-Date: Wed, 26 Feb 2025 19:44:46 +0100
-Message-ID: <20250226184506.64114-4-sebastian.reichel@collabora.com>
-X-Mailer: git-send-email 2.47.2
-In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-A USB-PD hard reset involves removing the voltage from VBUS for some
-time. So basically it has the same effect as removing the USB-C plug
-for a short moment. If the machine is powered from the USB-C port and
-does not have a fallback supply (e.g. a battery), this will result in
-a full machine reset due to power loss.
-
-Ideally we want to avoid triggering a hard reset on these boards. A
-non-working USB-C port is probably better than unplanned reboots. But
-boards with a backup supply should do the hard reset to get everything
-working again.
-
-In theory it would be enough to check the self_powered property, but
-it seems the property might not be configured consistently enough in
-system firmwares.
-
-USB-PD hard resets should happen rarely in general, so let's at least
-print an error message before the potential board reset happens. This
-is also useful, since it immediately gives away which device triggered
-the hard reset.
-
-Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
- drivers/usb/tcpm/tcpm.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
-index 786d92fa4c6f..909fe2ef4fcb 100644
--- a/drivers/usb/tcpm/tcpm.c
-+++ b/drivers/usb/tcpm/tcpm.c
-@@ -1711,6 +1711,8 @@ static void run_state_machine(struct udevice *dev)
- 
- 	/* Hard_Reset states */
- 	case HARD_RESET_SEND:
-+		if (!port->self_powered && port->port_type == TYPEC_PORT_SNK)
-+			dev_err(dev, "Initiating hard-reset, which might result in machine power-loss.\n");
- 		tcpm_pd_transmit(dev, TCPC_TX_HARD_RESET, NULL);
- 		tcpm_set_state(dev, HARD_RESET_START, 0);
- 		port->wait_dr_swap_message = false;
-
-From patchwork Wed Feb 26 18:44:47 2025
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Sebastian Reichel <sebastian.reichel@collabora.com>
-X-Patchwork-Id: 2052542
-X-Patchwork-Delegate: marek.vasut@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.a=rsa-sha256 header.s=mail header.b=K4mNmlOy;
-	dkim-atps=neutral
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org)
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature ECDSA (secp384r1))
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4Z33Lk40FPz1yCp
-	for <incoming@patchwork.ozlabs.org>; Thu, 27 Feb 2025 05:45:18 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id DAFC780FF2;
-	Wed, 26 Feb 2025 19:45:12 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Authentication-Results: phobos.denx.de;
-	dkim=pass (2048-bit key;
- unprotected) header.d=collabora.com header.i=@collabora.com
- header.b="K4mNmlOy";
-	dkim-atps=neutral
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 56A22810F9; Wed, 26 Feb 2025 19:45:11 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
- DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED,
- SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2
-Received: from bali.collaboradmins.com (bali.collaboradmins.com
- [IPv6:2a01:4f8:201:9162::2])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 217E080FF2
- for <u-boot@lists.denx.de>; Wed, 26 Feb 2025 19:45:08 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=collabora.com
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=sebastian.reichel@collabora.com
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com;
- s=mail; t=1740595507;
- bh=FeXZr6pfjIqGXvnsLHDigD702EmgVNH91IWVsD16udQ=;
- h=From:To:Cc:Subject:Date:In-Reply-To:References:From;
- b=K4mNmlOycXzLuJnNeDxyXLVCeZWNr//ycRqDt3ld9634ThDvJ0+y49X3z2nYW+fei
- HCqH2AoFiXj7khjiFpwCA4xOlYaTrF9yb0M9ApRxJ8vGuslNIK2k9osj8IJMoWmY8S
- fEez4H6Wso4VamCnXKCze2G5np5mhola5QxSnIJ2CXdFP9TM1x54P+XyeJMX6IZK0X
- lpZ0R8mACHGgXnkBASRMbo0CnLfSVrUgA83A0FHT7UgxfW8399wHol/FBakg5WS8nt
- 47154TDW4ikoGF4dHBeD0KemJSR7I4F+nnUVQfgg8sXZKVm4yilBT+yx3WWBVCjQDl
- 3igqfexnaUKnA==
-Received: from jupiter.universe (dyndsl-091-249-076-032.ewe-ip-backbone.de
- [91.249.76.32])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
- key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
- SHA256)
- (No client certificate requested) (Authenticated sender: sre)
- by bali.collaboradmins.com (Postfix) with ESMTPSA id 7FBB317E065A;
- Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-Received: by jupiter.universe (Postfix, from userid 1000)
- id 37B6A480039; Wed, 26 Feb 2025 19:45:07 +0100 (CET)
-From: Sebastian Reichel <sebastian.reichel@collabora.com>
-To: Marek Vasut <marex@denx.de>, u-boot@lists.denx.de,
- Jonas Karlman <jonas@kwiboo.se>, Soeren Moch <smoch@web.de>
-Cc: Tim Harvey <tharvey@gateworks.com>,
- Philipp Tomsich <philipp.tomsich@vrull.eu>,
- Anand Moon <linux.amoon@gmail.com>, Maxim Kiselev <bigunclemax@gmail.com>,
- Sebastian Reichel <sebastian.reichel@collabora.com>
-Subject: [PATCH v2 4/4] usb: tcpm: improve data role mismatch error recovery
-Date: Wed, 26 Feb 2025 19:44:47 +0100
-Message-ID: <20250226184506.64114-5-sebastian.reichel@collabora.com>
-X-Mailer: git-send-email 2.47.2
-In-Reply-To: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-References: <20250226184506.64114-1-sebastian.reichel@collabora.com>
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.39
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de
-X-Virus-Status: Clean
-
-On Radxa ROCK 5B I managed to get U-Boot into an endless loop of
-printing
-
-fusb302 usb-typec@22: TCPM: data role mismatch, initiating error recovery
-
-messages by changing the data role in Linux and then rebooting the
-system. This is happening because the external device (A cheap USB-C hub
-powered through a USB-C PD power-supply) kept its state and the error
-recovery path for non self-powered devices is not enough to change it.
-
-Avoid this by swapping our own data role when the error recovery stage
-is reached for a port, which is not self-powered. Right now data support
-is limited anyways and once proper support is added we can use the data
-role swap request to get the desired data direction after the initial
-negotiation completed.
-
-Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
- drivers/usb/tcpm/tcpm.c | 30 +++++++++++++++++++++++++++---
- 1 file changed, 27 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
-index 909fe2ef4fcb..12d66d470f9a 100644
--- a/drivers/usb/tcpm/tcpm.c
-+++ b/drivers/usb/tcpm/tcpm.c
-@@ -833,6 +833,28 @@ static void tcpm_pd_ctrl_request(struct udevice *dev,
- 	}
- }
- 
-+static void tcpm_recover_data_role_mismatch(struct udevice *dev)
-+{
-+	struct tcpm_port *port = dev_get_uclass_plat(dev);
-+
-+	dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n");
-+	if (port->self_powered) {
-+		tcpm_set_state(dev, ERROR_RECOVERY, 0);
-+		return;
-+	}
-+
-+	/*
-+	 * The error recovery will not help for devices, which are not
-+	 * self-powered because the error recovery avoids killing the board
-+	 * power. Since this can happen early on sending
-+	 * a DR_SWAP request is not sensible. Instead let's change our own
-+	 * data role. It can be swapped back once USB-PD reached the ready
-+	 * state.
-+	 */
-+	tcpm_set_roles(dev, true, port->pwr_role,
-+		       port->data_role == TYPEC_HOST ? TYPEC_DEVICE : TYPEC_HOST);
-+}
-+
- static void tcpm_pd_rx_handler(struct udevice *dev,
- 			       const struct pd_message *msg)
- {
-@@ -867,9 +889,11 @@ static void tcpm_pd_rx_handler(struct udevice *dev,
- 		remote_is_host = !!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE);
- 		local_is_host = port->data_role == TYPEC_HOST;
- 		if (remote_is_host == local_is_host) {
-			dev_err(dev, "TCPM: data role mismatch, initiating error recovery\n");
-			tcpm_set_state(dev, ERROR_RECOVERY, 0);
-		} else {
-+			tcpm_recover_data_role_mismatch(dev);
-+			local_is_host = port->data_role == TYPEC_HOST;
-+		}
-+
-+		if (remote_is_host != local_is_host) {
- 			if (cnt)
- 				tcpm_pd_data_request(dev, msg);
- 			else
--- a/32
+++ b/32
@ -1,23 +1,16 @@
 a64-olinuxino
-a64-olinuxino-emmc
 amarula_a64_relic
-anbernic_rg35xx_h700
-apple_m1
 bananapi_m2_plus_h5
 bananapi_m64
 beelink_gs1
 dragonboard410c
 dragonboard820c
-eaidk-610-rk3399
-emlid_neutis_n5_devboard
-evb-px5
 evb-rk3328
 evb-rk3399
 ficus-rk3399
 firefly-rk3399
 geekbox
 hikey
-hmibsc
 khadas-edge-captain-rk3399
 khadas-edge-rk3399
 khadas-edge-v-rk3399
@ -42,65 +35,48 @@ nanopi-m4-rk3399
 nanopi_neo2
 nanopi-neo4-rk3399
 nanopi_neo_plus2
-nanopi_r1s_h5
-nanopi-r2c-plus-rk3328
-nanopi-r2c-rk3328
-nanopi-r2s-plus-rk3328
 nanopi-r2s-rk3328
 nanopi-r4s-rk3399
-oceanic_5205_5inmfd
 odroid-c2
 orangepi_3
 orangepi_lite2
 orangepi_one_plus
 orangepi_pc2
 orangepi_prime
-orangepi-r1-plus-lts-rk3328
-orangepi-r1-plus-rk3328
 orangepi-rk3399
 orangepi_win
 orangepi_zero2
-orangepi_zero2w
-orangepi_zero3
 orangepi_zero_plus
 orangepi_zero_plus2
 p212
 p2371-2180
 p2771-0000-500
+p3450-0000
 pine64-lts
 pine64_plus
 pinebook
 pinebook-pro-rk3399
 pine_h64
 pinephone
-pinephone-pro-rk3399
 pinetab
 poplar
 puma-rk3399
-qcm6490
-qcom
-qcom_qcs8300
-qcom_qcs9100
-qemu_arm64
-qemu_arm64_lwip
 roc-cc-rk3328
-rock-4c-plus-rk3399
-rock-4se-rk3399
 rock64-rk3328
 rock960-rk3399
 rock-pi-4c-rk3399
 rock-pi-4-rk3399
 rock-pi-e-rk3328
-rock-pi-e-v3-rk3328
 rock-pi-n10-rk3399pro
 rockpro64-rk3399
 roc-pc-mezzanine-rk3399
 roc-pc-rk3399
+rpi_3
+rpi_4
 rpi_arm64
 sopine_baseboard
 tanix_tx6
 teres_i
-transpeed-8k618-t
 turris_mox
 vexpress_aemv8a_juno
-x96_mate
+xilinx_zynqmp_virt
--- a/141
+++ b/141
@ -0,0 +1,141 @@
+A10-OLinuXino-Lime
+A10s-OLinuXino-M
+A13-OLinuXino
+A13-OLinuXinoM
+A20-Olimex-SOM-EVB
+A20-OLinuXino-Lime
+A20-OLinuXino-Lime2
+A20-OLinuXino_MICRO
+am335x_evm
+am57xx_evm
+Ampe_A76
+apalis_imx6
+arndale
+Auxtek-T003
+Auxtek-T004
+ba10_tv_box
+Bananapi
+bananapi_m1_plus
+bananapi_m2_berry
+Bananapi_m2m
+bananapi_m2_plus_h3
+Bananapi_M2_Ultra
+bananapi_m2_zero
+Bananapro
+chiliboard
+CHIP
+Chuwi_V7_CW0825
+clearfog
+cm_fx6
+Colombus
+colorfly_e708_q1
+CSQ_CS908
+Cubieboard
+Cubieboard2
+Cubieboard4
+Cubietruck
+Cubietruck_plus
+db-mv784mp-gp
+difrnce_dit4350
+dserve_dsrv9703c
+evb-rk3229
+firefly-rk3288
+helios4
+Hummingbird_A31
+Hyundai_A7HD
+i12-tvbox
+icnova-a20-swac
+inet1
+iNet_3F
+iNet_3W
+inet86dz
+iNet_86VS
+inet97fv2
+inet98v_rev2
+inet9f_rev03
+inet_q972
+Itead_Ibox_A20
+jesurun_q5
+jetson-tk1
+Lamobo_R1
+libretech_all_h3_cc_h2_plus
+Linksprite_pcDuino
+Linksprite_pcDuino3
+Linksprite_pcDuino3_Nano
+liteboard
+marsboard
+Marsboard_A10
+Mele_A1000
+Mele_A1000G_quad
+Mele_I7
+Mele_M3
+Mele_M5
+Mele_M9
+Mini-X
+mk802
+mk802_a10s
+mk802ii
+MK808C
+MSI_Primo73
+MSI_Primo81
+mx6cuboxi
+nanopi_m1
+nanopi_m1_plus
+nanopi_neo
+novena
+odroid
+odroid-xu3
+omap3_beagle
+omap4_panda
+omap5_uevm
+Orangepi
+orangepi_2
+orangepi_lite
+Orangepi_mini
+orangepi_one
+orangepi_pc
+orangepi_pc_plus
+orangepi_plus
+orangepi_plus2e
+orangepi_r1
+orangepi_zero
+origen
+paz00
+pinecube
+polaroid_mid2809pxe04
+pov_protab2_ips9
+q8_a13_tablet
+q8_a23_tablet_800x480
+q8_a33_tablet_1024x600
+q8_a33_tablet_800x480
+qemu_arm
+r7-tv-dongle
+riotboard
+rock
+rock2
+rock-pi-n8-rk3288
+rpi_2
+rpi_3_32b
+rpi_4_32b
+Sinlinx_SinA31s
+Sinovoip_BPI_M2
+Sinovoip_BPI_M3
+stih410-b2260
+stm32mp15_basic
+sunxi_Gemei_G9
+tbs_a711
+tinker-rk3288
+tinker-s-rk3288
+trimslice
+turris_omnia
+udoo
+udoo_neo
+usbarmory
+UTOO_P66
+wandboard
+warp7
+Wexler_TAB7200
+Wits_Pro_A20_DKT
+xilinx_zynq_virt
+Yones_Toptech_BS1078_V2
+zeropi
--- a/disable-VBE-by-default.patch
+++ b/disable-VBE-by-default.patch
@ -1,32 +0,0 @@
-From d9e3a49bc2a29922da5bddd95772279f6edba802 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Fri, 18 Aug 2023 13:28:05 +0100
-Subject: [PATCH] disable VBE by default
-
-The VBE protocol needs explicit device support and as
-such isn't particularly useful by itself without that,
-it also adds size and the potential of an attack vector
-so devices that wish to use this protocol should
-explicitly opt in to it like all other large features
-in U-Boot.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- boot/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/boot/Kconfig b/boot/Kconfig
-index 30eb5b328d7..e8c3fbcb11d 100644
--- a/boot/Kconfig
-+++ b/boot/Kconfig
-@@ -635,7 +635,6 @@ config BOOTMETH_QFW
- config BOOTMETH_VBE
- 	bool "Bootdev support for Verified Boot for Embedded"
- 	depends on FIT
-	default y
- 	select BOOTMETH_GLOBAL
- 	select EVENT
- 	help
-- 
-2.49.0
-
--- a/dragonboard-fixes.patch
+++ b/dragonboard-fixes.patch
@ -0,0 +1,115 @@
+From 8b0274a733cd1ce39ad9ad18e1bd8efdd02a40b7 Mon Sep 17 00:00:00 2001
+From: Rob Clark <robdclark@gmail.com>
+Date: Wed, 21 Jun 2017 14:21:15 -0400
+Subject: [PATCH 1/3] WIP: fix usb
+
+---
+ common/usb_storage.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/common/usb_storage.c b/common/usb_storage.c
+index d92ebb6eb19..9df3c3daaf4 100644
+--- a/common/usb_storage.c
+++ b/common/usb_storage.c
+@@ -1016,7 +1016,7 @@ static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss)
+ 
+ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
+ {
+-	int retries = 10;
+	int retries = 20;
+ 
+ 	do {
+ 		memset(&srb->cmd[0], 0, 12);
+@@ -1039,7 +1039,7 @@ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
+ 		if ((srb->sense_buf[2] == 0x02) &&
+ 		    (srb->sense_buf[12] == 0x3a))
+ 			return -1;
+-		mdelay(100);
+		mdelay(250);
+ 	} while (retries--);
+ 
+ 	return -1;
+-- 
+2.19.1
+
+From 7bf41d74ca9d58bc2243b7688f8987c1d373ea56 Mon Sep 17 00:00:00 2001
+From: Rob Clark <robdclark@gmail.com>
+Date: Mon, 3 Jul 2017 08:34:37 -0400
+Subject: [PATCH 2/3] HACK: disable emmc
+
+Hitting some timeout which makes boot take much longer.  And
+uefi/boot/rootfs partitions will be on sd-card or usb disk, etc,
+so we can just ignore emmc.
+---
+ arch/arm/dts/dragonboard410c.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
+index fa348bc621e..bfe7f15d5ed 100644
+--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
+@@ -106,6 +106,7 @@
+ 			#phy-cells = <0>;
+ 		};
+ 
+/*
+ 		sdhci@07824000 {
+ 			compatible = "qcom,sdhci-msm-v4";
+ 			reg = <0x7824900 0x11c 0x7824000 0x800>;
+@@ -115,6 +116,7 @@
+ 			clock = <&clkc 0>;
+ 			clock-frequency = <100000000>;
+ 		};
+*/
+ 
+ 		sdhci@07864000 {
+ 			compatible = "qcom,sdhci-msm-v4";
+-- 
+2.19.1
+
+From 871fe802cf3ab593b9332c4f36ab2b3f179d51ae Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 4 Sep 2018 12:21:59 +0100
+Subject: [PATCH 3/3] add options for dm410c config
+
+---
+ configs/dragonboard410c_defconfig | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
+index a55abaf8df5..4ece0cafbe4 100644
+--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
+@@ -7,6 +7,8 @@ CONFIG_NR_DRAM_BANKS=1
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+ CONFIG_FIT=y
+ CONFIG_OF_BOARD_SETUP=y
+CONFIG_FAT_WRITE=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+ CONFIG_MISC_INIT_R=y
+ # CONFIG_DISPLAY_CPUINFO is not set
+ # CONFIG_DISPLAY_BOARDINFO is not set
+@@ -41,6 +43,13 @@ CONFIG_DM_PMIC=y
+ CONFIG_PMIC_PM8916=y
+ CONFIG_MSM_SERIAL=y
+ CONFIG_SPMI_MSM=y
+CONFIG_DM_ETH=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+# CONFG_VIDEO_BPP8 is not set
+CONFIG_NO_FB_CLEAR=y
+CONFIG_VIDEO_SIMPLE=y
+CONFIG_USB_KEYBOARD=y
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
+ CONFIG_USB_EHCI_HCD=y
+@@ -57,5 +66,6 @@ CONFIG_USB_HOST_ETHER=y
+ CONFIG_USB_ETHER_ASIX=y
+ CONFIG_USB_ETHER_ASIX88179=y
+ CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+ CONFIG_USB_ETHER_SMSC95XX=y
+ CONFIG_OF_LIBFDT_OVERLAY=y
+-- 
+2.19.1
+
--- a/dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch
+++ b/dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch
@ -0,0 +1,115 @@
+From patchwork Mon Nov  1 04:43:47 2021
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Yifeng Zhao <yifeng.zhao@rock-chips.com>
+X-Patchwork-Id: 1548950
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
+	(No client certificate requested)
+	by bilbo.ozlabs.org (Postfix) with ESMTPS id 4HjL646Yhcz9sS8
+	for <incoming@patchwork.ozlabs.org>; Mon,  1 Nov 2021 15:44:12 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 6212783389;
+	Mon,  1 Nov 2021 05:44:06 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=none (p=none dis=none) header.from=rock-chips.com
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 26A6483395; Mon,  1 Nov 2021 05:44:05 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-0.4 required=5.0 tests=BAYES_00,RCVD_IN_SORBS_WEB,
+ SPF_HELO_NONE,T_SPF_PERMERROR autolearn=no autolearn_force=no
+ version=3.4.2
+Received: from lucky1.263xmail.com (lucky1.263xmail.com [211.157.147.134])
+ (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 04D7B83383
+ for <u-boot@lists.denx.de>; Mon,  1 Nov 2021 05:43:59 +0100 (CET)
+Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none)
+ header.from=rock-chips.com
+Authentication-Results: phobos.denx.de;
+ spf=fail smtp.mailfrom=yifeng.zhao@rock-chips.com
+Received: from localhost (unknown [192.168.167.16])
+ by lucky1.263xmail.com (Postfix) with ESMTP id 1B96CD124A;
+ Mon,  1 Nov 2021 12:43:55 +0800 (CST)
+X-MAIL-GRAY: 0
+X-MAIL-DELIVERY: 1
+X-ADDR-CHECKED4: 1
+X-SKE-CHECKED: 1
+X-ANTISPAM-LEVEL: 2
+Received: from localhost.localdomain (unknown [58.22.7.114])
+ by smtp.263.net (postfix) whith ESMTP id
+ P5172T139932542678784S1635741828952225_;
+ Mon, 01 Nov 2021 12:43:55 +0800 (CST)
+X-IP-DOMAINF: 1
+X-RL-SENDER: yifeng.zhao@rock-chips.com
+X-SENDER: zyf@rock-chips.com
+X-LOGIN-NAME: yifeng.zhao@rock-chips.com
+X-FST-TO: kever.yang@rock-chips.com
+X-RCPT-COUNT: 7
+X-LOCAL-RCPT-COUNT: 2
+X-SENDER-IP: 58.22.7.114
+X-ATTACHMENT-NUM: 0
+X-UNIQUE-TAG: <8beb59827f65d556787d36e0068aa9cb>
+X-System-Flag: 0
+From: Yifeng Zhao <yifeng.zhao@rock-chips.com>
+To: Kever Yang <kever.yang@rock-chips.com>
+Cc: sjg <sjg@chromium.org>, Peter Robinson <pbrobinson@gmail.com>,
+ Philipp Tomsich <philipp.tomsich@theobroma-systems.com>,
+ u-boot@lists.denx.de, Jack Mitchell <ml@embed.me.uk>,
+ Yifeng Zhao <yifeng.zhao@rock-chips.com>
+Subject: [PATCH] dts: rockchip: rk3399: enable emmc phy for spl
+Date: Mon,  1 Nov 2021 12:43:47 +0800
+Message-Id: <20211101044347.17822-1-yifeng.zhao@rock-chips.com>
+X-Mailer: git-send-email 2.17.1
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.103.2 at phobos.denx.de
+X-Virus-Status: Clean
+
+adapting commit ac804143cf ("mmc: rockchip_sdhci: add phy and clock
+config for rk3399") to fix the issue "Not found emmc phy device".
+
+Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
+---
+
+ arch/arm/dts/rk3399-u-boot.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
+index 73922c328a..716b9a433a 100644
+--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
+@@ -88,6 +88,10 @@
+ 	u-boot,dm-pre-reloc;
+ };
+ 
+&emmc_phy {
+	u-boot,dm-pre-reloc;
+};
+
+ &grf {
+ 	u-boot,dm-pre-reloc;
+ };
--- a/enable-bootmenu-by-default.patch
+++ b/enable-bootmenu-by-default.patch
@ -1,49 +0,0 @@
-From a956480a6d52ae90ef4a46275c2ee29a4074de36 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Fri, 18 Aug 2023 23:10:42 +0100
-Subject: [PATCH] enable bootmenu by default
-
-We want the boot menu on all Fedora devices as it makes
-it a whole lot more user friendly.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- boot/Kconfig | 2 ++
- cmd/Kconfig  | 1 +
- 2 files changed, 3 insertions(+)
-
-diff --git a/boot/Kconfig b/boot/Kconfig
-index 467b09e2350..ad67b1f65a6 100644
--- a/boot/Kconfig
-+++ b/boot/Kconfig
-@@ -1281,6 +1281,7 @@ config BOOTDELAY
- 
- config AUTOBOOT_KEYED
- 	bool "Stop autobooting via specific input key / string"
-+	default y
- 	help
- 	  This option enables stopping (aborting) of the automatic
- 	  boot feature only by issuing a specific input key or
-@@ -1433,6 +1434,7 @@ config AUTOBOOT_MENUKEY
- 
- config AUTOBOOT_MENU_SHOW
- 	bool "Show a menu on boot"
-+	default y
- 	depends on CMD_BOOTMENU
- 	help
- 	  This enables the boot menu, controlled by environment variables
-diff --git a/cmd/Kconfig b/cmd/Kconfig
-index 43ca10f69cc..3d39f2914cc 100644
--- a/cmd/Kconfig
-+++ b/cmd/Kconfig
-@@ -413,6 +413,7 @@ source lib/efi_selftest/Kconfig
- 
- config CMD_BOOTMENU
- 	bool "bootmenu"
-+	default y
- 	select MENU
- 	select CHARSET
- 	help
-- 
-2.41.0
-
--- a/p3450-fix-board.patch
+++ b/p3450-fix-board.patch
@ -1,25 +0,0 @@
-From c9b65320d64a60cde74c4c1f9cb4a05198a456c2 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 10 Sep 2025 13:27:52 +0100
-Subject: [PATCH] further size reductions
-
---
- configs/p3450-0000_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig
-index 2ebcf8b83fc..a5e717a02ed 100644
--- a/configs/p3450-0000_defconfig
-+++ b/configs/p3450-0000_defconfig
-@@ -27,6 +27,8 @@ CONFIG_CONSOLE_MUX=y
- CONFIG_SYS_STDIO_DEREGISTER=y
- CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # "
- # CONFIG_BOOTM_PLAN9 is not set
-+# CONFIG_SYS_DTC_PAD_BYTES is not set
-+# CONFIG_LEGACY_IMAGE_FORMAT is not set
- # CONFIG_BOOTM_RTEMS is not set
- # CONFIG_BOOTM_VXWORKS is not set
- # CONFIG_CMD_ELF is not set
-- 
-2.51.0
-
--- a/phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch
+++ b/phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch
@ -0,0 +1,233 @@
+From patchwork Tue Apr  6 15:10:59 2021
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Icenowy Zheng <icenowy@aosc.io>
+X-Patchwork-Id: 1462876
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Authentication-Results: ozlabs.org;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
+ header.a=rsa-sha256 header.s=default header.b=unszVtqT;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.a=rsa-sha256
+ header.s=default header.b=mWwYCh9A;
+	dkim-atps=neutral
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
+ SHA256)
+	(No client certificate requested)
+	by ozlabs.org (Postfix) with ESMTPS id 4FF9wc3GdNz9sW1
+	for <incoming@patchwork.ozlabs.org>; Wed,  7 Apr 2021 01:11:42 +1000 (AEST)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id C1F9C8040A;
+	Tue,  6 Apr 2021 17:11:32 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=none (p=none dis=none) header.from=aosc.io
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
+ header.b="unszVtqT";
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.b="mWwYCh9A";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id E4F22805B4; Tue,  6 Apr 2021 17:11:30 +0200 (CEST)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,SPF_HELO_NONE autolearn=ham
+ autolearn_force=no version=3.4.2
+Received: from relay3.mymailcheap.com (relay3.mymailcheap.com
+ [217.182.66.161])
+ (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 2FC4A8039D
+ for <u-boot@lists.denx.de>; Tue,  6 Apr 2021 17:11:27 +0200 (CEST)
+Authentication-Results: phobos.denx.de;
+ dmarc=none (p=none dis=none) header.from=aosc.io
+Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=icenowy@aosc.io
+Received: from filter2.mymailcheap.com (filter2.mymailcheap.com
+ [91.134.140.82])
+ by relay3.mymailcheap.com (Postfix) with ESMTPS id A6AC13ECDF;
+ Tue,  6 Apr 2021 17:11:26 +0200 (CEST)
+Received: from localhost (localhost [127.0.0.1])
+ by filter2.mymailcheap.com (Postfix) with ESMTP id 88D512A915;
+ Tue,  6 Apr 2021 17:11:26 +0200 (CEST)
+DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mymailcheap.com;
+ s=default; t=1617721886;
+ bh=qb5gt5o7M9qjdJd67A3WHGZp/76w4s4FS6+u1VuEh/o=;
+ h=From:To:Cc:Subject:Date:From;
+ b=unszVtqTnO9MGZVbgLH5H0cMo3VfQ+g5377blmOUcrtzMSqNbDD5SM25MUhlTUKiB
+ hTFq4L53gszBYfRPfh7Z5XgNVERULL5Zx0+WnVjZ7kUIp/wS3IQqxe81ChoFEsLTr8
+ 22UB9NN3OSVkuN/jRAzX+lKpugVGBHwOCjZBZukQ=
+Received: from filter2.mymailcheap.com ([127.0.0.1])
+ by localhost (filter2.mymailcheap.com [127.0.0.1]) (amavisd-new, port 10024)
+ with ESMTP id V9lVOgo6gApH; Tue,  6 Apr 2021 17:11:25 +0200 (CEST)
+Received: from mail20.mymailcheap.com (mail20.mymailcheap.com [51.83.111.147])
+ (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by filter2.mymailcheap.com (Postfix) with ESMTPS;
+ Tue,  6 Apr 2021 17:11:25 +0200 (CEST)
+Received: from [213.133.102.83] (ml.mymailcheap.com [213.133.102.83])
+ by mail20.mymailcheap.com (Postfix) with ESMTP id C9EA3400B6;
+ Tue,  6 Apr 2021 15:11:24 +0000 (UTC)
+Authentication-Results: mail20.mymailcheap.com; dkim=pass (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.b="mWwYCh9A";
+ dkim-atps=neutral
+AI-Spam-Status: Not processed
+Received: from ice-e5v2.lan (unknown [59.41.163.135])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange ECDHE (P-256) server-signature RSA-PSS (2048 bits) server-digest
+ SHA256) (No client certificate requested)
+ by mail20.mymailcheap.com (Postfix) with ESMTPSA id 251F840C16;
+ Tue,  6 Apr 2021 15:11:10 +0000 (UTC)
+DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=aosc.io; s=default;
+ t=1617721874; bh=qb5gt5o7M9qjdJd67A3WHGZp/76w4s4FS6+u1VuEh/o=;
+ h=From:To:Cc:Subject:Date:From;
+ b=mWwYCh9AM8eRWm9hiEqirytotj/G/C1p9r2fd0zUxPhS0UQH+kw6L3RWZnsfmXAYq
+ HmYFiM3ktIfwevqQw89tOi8c2ktb49iYOyHXkfi8hTZl1dNsJDS94uyzBiHYY+U7x5
+ P0aTRRaL5C8ua2c1GedoPx06nrARO/KMEFy39rxI=
+From: Icenowy Zheng <icenowy@aosc.io>
+To: Simon Glass <sjg@chromium.org>, Kever Yang <kever.yang@rock-chips.com>,
+ Frank Wang <frank.wang@rock-chips.com>,
+ Jagan Teki <jagan@amarulasolutions.com>
+Cc: u-boot@lists.denx.de,
+	Icenowy Zheng <icenowy@aosc.io>
+Subject: [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers
+ exit
+Date: Tue,  6 Apr 2021 23:10:59 +0800
+Message-Id: <20210406151059.1187379-1-icenowy@aosc.io>
+X-Mailer: git-send-email 2.30.2
+MIME-Version: 1.0
+X-Rspamd-Server: mail20.mymailcheap.com
+X-Spamd-Result: default: False [4.90 / 20.00]; RCVD_VIA_SMTP_AUTH(0.00)[];
+ ARC_NA(0.00)[]; R_DKIM_ALLOW(0.00)[aosc.io:s=default];
+ RECEIVED_SPAMHAUS_PBL(0.00)[59.41.163.135:received];
+ FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[];
+ R_MISSING_CHARSET(2.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[];
+ MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[aosc.io];
+ BROKEN_CONTENT_TYPE(1.50)[]; R_SPF_SOFTFAIL(0.00)[~all];
+ RCPT_COUNT_FIVE(0.00)[6]; ML_SERVERS(-3.10)[213.133.102.83];
+ DKIM_TRACE(0.00)[aosc.io:+]; MID_CONTAINS_FROM(1.00)[];
+ RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[];
+ MIME_TRACE(0.00)[0:+];
+ ASN(0.00)[asn:24940, ipnet:213.133.96.0/19, country:DE];
+ RCVD_COUNT_TWO(0.00)[2];
+ HFILTER_HELO_BAREIP(3.00)[213.133.102.83,1]
+X-Rspamd-Queue-Id: C9EA3400B6
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.102.4 at phobos.denx.de
+X-Virus-Status: Clean
+
+The OHCI and EHCI controllers are both bound to the same PHY. They will
+both do init and power_on operations when the controller is brought up
+and both do power_off and exit when the controller is stopped. However,
+the PHY uclass of U-Boot is not as sane as we thought -- they won't
+maintain a status mark for PHYs, and thus the functions of the PHYs
+could be called for multiple times. Calling init/power_on for multiple
+times have no severe problems, however calling power_off/exit for
+multiple times have a problem -- the first exit call will stop the PHY
+clock, and power_off/exit calls after it still trying to write to PHY
+registers. The write operation to PHY registers will fail because clock
+is already stopped.
+
+Adapt the count mechanism from phy-sun4i-usb to both init/exit and
+power_on/power_off functions to phy-rockchip-inno-usb2 to fix this
+problem. With this stopping USB controllers (manually or before booting
+a kernel) will work.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Fixes: ac97a9ece14e ("phy: rockchip: Add Rockchip USB2PHY driver")
+---
+ drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 21 +++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+index 62b8ba3a4a..be9cc99d90 100644
+--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+@@ -62,6 +62,8 @@ struct rockchip_usb2phy {
+ 	void *reg_base;
+ 	struct clk phyclk;
+ 	const struct rockchip_usb2phy_cfg *phy_cfg;
+	int init_count;
+	int power_on_count;
+ };
+ 
+ static inline int property_enable(void *reg_base,
+@@ -92,6 +94,10 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
+ 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+ 
+	priv->power_on_count++;
+	if (priv->power_on_count != 1)
+		return 0;
+
+ 	property_enable(priv->reg_base, &port_cfg->phy_sus, false);
+ 
+ 	/* waiting for the utmi_clk to become stable */
+@@ -106,6 +112,10 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
+ 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+ 
+	priv->power_on_count--;
+	if (priv->power_on_count != 0)
+		return 0;
+
+ 	property_enable(priv->reg_base, &port_cfg->phy_sus, true);
+ 
+ 	return 0;
+@@ -118,6 +128,10 @@ static int rockchip_usb2phy_init(struct phy *phy)
+ 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+ 	int ret;
+ 
+	priv->init_count++;
+	if (priv->init_count != 1)
+		return 0;
+
+ 	ret = clk_enable(&priv->phyclk);
+ 	if (ret) {
+ 		dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret);
+@@ -140,6 +154,10 @@ static int rockchip_usb2phy_exit(struct phy *phy)
+ 	struct udevice *parent = dev_get_parent(phy->dev);
+ 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ 
+	priv->init_count--;
+	if (priv->init_count != 0)
+		return 0;
+
+ 	clk_disable(&priv->phyclk);
+ 
+ 	return 0;
+@@ -212,6 +230,9 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
+ 		return ret;
+ 	}
+ 
+	priv->power_on_count = 0;
+	priv->init_count = 0;
+
+ 	return 0;
+ }
+ 
--- a/raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch
+++ b/raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch
@ -1,32 +0,0 @@
-From 72fd4fdb54721a31d2b4e9f95fdd3b3e398bb2c0 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 12 Apr 2026 01:14:12 +0100
-Subject: [PATCH] board/raspberrypi: Add quirk for RPi5 2Gb rev 1.0
-
-All 2Gb Raspberry Pi 5s use the BCM2712D0 silicon, but
-the early boards were still rev 1.0 so we need a quirk
-to ensure the correct device tree is used.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- board/raspberrypi/rpi/rpi.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
-index b0a1484c0fa..ff9cab6521b 100644
--- a/board/raspberrypi/rpi/rpi.c
-+++ b/board/raspberrypi/rpi/rpi.c
-@@ -371,6 +371,10 @@ static void set_fdtfile(void)
- 	const char *fdtfile;
- 	int rev = revision & 0x0f;
- 
-+	/* 2GB Pi 5B board rev 1.0 always has BCM2712D0 silicon */
-+	if (revision == 0xb04170)
-+		rev = 1;
-+
- 	if (env_get("fdtfile"))
- 		return;
- 
-- 
-2.53.0
-
--- a/4
+++ b/4
@ -1,4 +0,0 @@
-qemu-riscv64_spl
-sifive_unleashed
-sifive_unmatched
-starfive_visionfive2
--- a/rockchip-Enable-preboot-start-for-pci-usb.patch
+++ b/rockchip-Enable-preboot-start-for-pci-usb.patch
@ -1,860 +0,0 @@
-From a6909a16b4cc301f1007d9e75d02abb6d06a1ea7 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 28 May 2026 21:29:29 +0100
-Subject: [PATCH] rockchip: Enable preboot start for pci/usb
-
-Enable the preboot so nvme works OOTB
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- configs/anbernic-rgxx3-rk3566_defconfig   | 2 ++
- configs/bpi-r2-pro-rk3568_defconfig       | 2 ++
- configs/cm3588-nas-rk3588_defconfig       | 2 ++
- configs/coolpi-4b-rk3588s_defconfig       | 2 ++
- configs/coolpi-cm5-evb-rk3588_defconfig   | 2 ++
- configs/evb-rk3568_defconfig              | 2 ++
- configs/evb-rk3588_defconfig              | 2 ++
- configs/firefly-rk3399_defconfig          | 2 ++
- configs/generic-rk3568_defconfig          | 2 ++
- configs/generic-rk3588_defconfig          | 2 ++
- configs/jaguar-rk3588_defconfig           | 2 ++
- configs/lubancat-2-rk3568_defconfig       | 2 ++
- configs/nanopc-t4-rk3399_defconfig        | 2 ++
- configs/nanopc-t6-rk3588_defconfig        | 2 ++
- configs/nanopi-r5c-rk3568_defconfig       | 2 ++
- configs/nanopi-r5s-rk3568_defconfig       | 2 ++
- configs/nanopi-r6c-rk3588s_defconfig      | 2 ++
- configs/nanopi-r6s-rk3588s_defconfig      | 2 ++
- configs/neu6a-io-rk3588_defconfig         | 2 ++
- configs/neu6b-io-rk3588_defconfig         | 2 ++
- configs/nova-rk3588s_defconfig            | 2 ++
- configs/odroid-m1-rk3568_defconfig        | 2 ++
- configs/odroid-m1s-rk3566_defconfig       | 2 ++
- configs/odroid-m2-rk3588s_defconfig       | 2 ++
- configs/orangepi-3b-rk3566_defconfig      | 2 ++
- configs/orangepi-5-max-rk3588_defconfig   | 2 ++
- configs/orangepi-5-plus-rk3588_defconfig  | 2 ++
- configs/orangepi-5-rk3588s_defconfig      | 2 ++
- configs/orangepi-5-ultra-rk3588_defconfig | 2 ++
- configs/pinebook-pro-rk3399_defconfig     | 1 +
- configs/pinetab2-rk3566_defconfig         | 2 ++
- configs/powkiddy-x55-rk3566_defconfig     | 2 ++
- configs/quartz64-a-rk3566_defconfig       | 2 ++
- configs/quartz64-b-rk3566_defconfig       | 4 ++++
- configs/quartzpro64-rk3588_defconfig      | 2 ++
- configs/radxa-cm3-io-rk3566_defconfig     | 2 ++
- configs/radxa-e25-rk3568_defconfig        | 2 ++
- configs/radxa-zero-3-rk3566_defconfig     | 2 ++
- configs/roc-pc-mezzanine-rk3399_defconfig | 2 ++
- configs/rock-3a-rk3568_defconfig          | 2 ++
- configs/rock-3b-rk3568_defconfig          | 2 ++
- configs/rock-3c-rk3566_defconfig          | 2 ++
- configs/rock-4c-plus-rk3399_defconfig     | 2 ++
- configs/rock-4se-rk3399_defconfig         | 2 ++
- configs/rock-5-itx-rk3588_defconfig       | 2 ++
- configs/rock-5c-rk3588s_defconfig         | 2 ++
- configs/rock-pi-4-rk3399_defconfig        | 2 ++
- configs/rock-pi-4c-rk3399_defconfig       | 2 ++
- configs/rock-pi-n10-rk3399pro_defconfig   | 2 ++
- configs/rock5a-rk3588s_defconfig          | 2 ++
- configs/rock5b-rk3588_defconfig           | 2 ++
- configs/rock960-rk3399_defconfig          | 2 ++
- configs/rockpro64-rk3399_defconfig        | 2 ++
- configs/sige7-rk3588_defconfig            | 2 ++
- configs/soquartz-blade-rk3566_defconfig   | 2 ++
- configs/soquartz-cm4-rk3566_defconfig     | 2 ++
- configs/soquartz-model-a-rk3566_defconfig | 2 ++
- configs/tiger-rk3588_defconfig            | 2 ++
- configs/toybrick-rk3588_defconfig         | 2 ++
- configs/turing-rk1-rk3588_defconfig       | 2 ++
- 60 files changed, 121 insertions(+)
-
-diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
-index 854de8b00a4..cd91f18ba80 100644
--- a/configs/anbernic-rgxx3-rk3566_defconfig
-+++ b/configs/anbernic-rgxx3-rk3566_defconfig
-@@ -12,6 +12,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- # CONFIG_EFI_LOADER is not set
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
-diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig
-index c5199a39448..603e07f2456 100644
--- a/configs/bpi-r2-pro-rk3568_defconfig
-+++ b/configs/bpi-r2-pro-rk3568_defconfig
-@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/cm3588-nas-rk3588_defconfig b/configs/cm3588-nas-rk3588_defconfig
-index 5b5ef8d5ac1..53147d115dd 100644
--- a/configs/cm3588-nas-rk3588_defconfig
-+++ b/configs/cm3588-nas-rk3588_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig
-index e6772622403..75e0b373ce9 100644
--- a/configs/coolpi-4b-rk3588s_defconfig
-+++ b/configs/coolpi-4b-rk3588s_defconfig
-@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/coolpi-cm5-evb-rk3588_defconfig b/configs/coolpi-cm5-evb-rk3588_defconfig
-index 4326e116849..a005e4441d3 100644
--- a/configs/coolpi-cm5-evb-rk3588_defconfig
-+++ b/configs/coolpi-cm5-evb-rk3588_defconfig
-@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
-index 4a5a7454e10..7ec199a08af 100644
--- a/configs/evb-rk3568_defconfig
-+++ b/configs/evb-rk3568_defconfig
-@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig
-index c7f6256a626..cfa73c660e7 100644
--- a/configs/evb-rk3588_defconfig
-+++ b/configs/evb-rk3588_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
-index 83b9de5feb9..2ba8f5029c3 100644
--- a/configs/firefly-rk3399_defconfig
-+++ b/configs/firefly-rk3399_defconfig
-@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
- CONFIG_DISPLAY_BOARDINFO_LATE=y
- CONFIG_SPL_MAX_SIZE=0x40000
-diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig
-index a33c3af9255..20966793568 100644
--- a/configs/generic-rk3568_defconfig
-+++ b/configs/generic-rk3568_defconfig
-@@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig
-index ac450e6d757..b5424ac9f16 100644
--- a/configs/generic-rk3588_defconfig
-+++ b/configs/generic-rk3588_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig
-index ed3883b4f9c..47dbd834f30 100644
--- a/configs/jaguar-rk3588_defconfig
-+++ b/configs/jaguar-rk3588_defconfig
-@@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_BASE=0xfeb50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
-index 7548bf60b06..2fb8a432503 100644
--- a/configs/lubancat-2-rk3568_defconfig
-+++ b/configs/lubancat-2-rk3568_defconfig
-@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_EFI_VAR_BUF_SIZE=16384
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
-diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
-index f8ae436a1ee..7aa8e1a8d42 100644
--- a/configs/nanopc-t4-rk3399_defconfig
-+++ b/configs/nanopc-t4-rk3399_defconfig
-@@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
- CONFIG_DISPLAY_BOARDINFO_LATE=y
- CONFIG_SPL_MAX_SIZE=0x40000
-diff --git a/configs/nanopc-t6-rk3588_defconfig b/configs/nanopc-t6-rk3588_defconfig
-index ba9a5adece7..eaf7fa5a0fc 100644
--- a/configs/nanopc-t6-rk3588_defconfig
-+++ b/configs/nanopc-t6-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
-index e75a24dadc8..159ef033932 100644
--- a/configs/nanopi-r5c-rk3568_defconfig
-+++ b/configs/nanopi-r5c-rk3568_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="usb start;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
-index c971f376b38..60b5e8fa014 100644
--- a/configs/nanopi-r5s-rk3568_defconfig
-+++ b/configs/nanopi-r5s-rk3568_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="usb start;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/nanopi-r6c-rk3588s_defconfig b/configs/nanopi-r6c-rk3588s_defconfig
-index 861e3234d29..bb6e2082e3b 100644
--- a/configs/nanopi-r6c-rk3588s_defconfig
-+++ b/configs/nanopi-r6c-rk3588s_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/nanopi-r6s-rk3588s_defconfig b/configs/nanopi-r6s-rk3588s_defconfig
-index 743dfca441b..903ec56ad6f 100644
--- a/configs/nanopi-r6s-rk3588s_defconfig
-+++ b/configs/nanopi-r6s-rk3588s_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/neu6a-io-rk3588_defconfig b/configs/neu6a-io-rk3588_defconfig
-index 19f129e96f0..08ed699b01d 100644
--- a/configs/neu6a-io-rk3588_defconfig
-+++ b/configs/neu6a-io-rk3588_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/neu6b-io-rk3588_defconfig b/configs/neu6b-io-rk3588_defconfig
-index 2cf5aeccf51..8cafd779a1c 100644
--- a/configs/neu6b-io-rk3588_defconfig
-+++ b/configs/neu6b-io-rk3588_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/nova-rk3588s_defconfig b/configs/nova-rk3588s_defconfig
-index f7d7492ff46..5abb6ebbe18 100644
--- a/configs/nova-rk3588s_defconfig
-+++ b/configs/nova-rk3588s_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
-index b00985b0405..19d7af53c7f 100644
--- a/configs/odroid-m1-rk3568_defconfig
-+++ b/configs/odroid-m1-rk3568_defconfig
-@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/odroid-m1s-rk3566_defconfig b/configs/odroid-m1s-rk3566_defconfig
-index d59882a2a59..20f6dc3c26e 100644
--- a/configs/odroid-m1s-rk3566_defconfig
-+++ b/configs/odroid-m1s-rk3566_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/odroid-m2-rk3588s_defconfig b/configs/odroid-m2-rk3588s_defconfig
-index e71e61ddb0b..561c2b28b7a 100644
--- a/configs/odroid-m2-rk3588s_defconfig
-+++ b/configs/odroid-m2-rk3588s_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/orangepi-3b-rk3566_defconfig b/configs/orangepi-3b-rk3566_defconfig
-index 1cd78789fa1..dcf182231da 100644
--- a/configs/orangepi-3b-rk3566_defconfig
-+++ b/configs/orangepi-3b-rk3566_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/orangepi-5-max-rk3588_defconfig b/configs/orangepi-5-max-rk3588_defconfig
-index 0861df962cf..744aad89c4a 100644
--- a/configs/orangepi-5-max-rk3588_defconfig
-+++ b/configs/orangepi-5-max-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/orangepi-5-plus-rk3588_defconfig b/configs/orangepi-5-plus-rk3588_defconfig
-index 52523f87aec..e3bb4e43da9 100644
--- a/configs/orangepi-5-plus-rk3588_defconfig
-+++ b/configs/orangepi-5-plus-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/orangepi-5-rk3588s_defconfig b/configs/orangepi-5-rk3588s_defconfig
-index e0eba389289..33fe68add7b 100644
--- a/configs/orangepi-5-rk3588s_defconfig
-+++ b/configs/orangepi-5-rk3588s_defconfig
-@@ -17,6 +17,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/orangepi-5-ultra-rk3588_defconfig b/configs/orangepi-5-ultra-rk3588_defconfig
-index fb7f4432983..62419609695 100644
--- a/configs/orangepi-5-ultra-rk3588_defconfig
-+++ b/configs/orangepi-5-ultra-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
-index cbf95b4692f..9e4d1b1061d 100644
--- a/configs/pinebook-pro-rk3399_defconfig
-+++ b/configs/pinebook-pro-rk3399_defconfig
-@@ -22,6 +22,7 @@ CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
- CONFIG_BOOTDELAY=3
- CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
- CONFIG_DISPLAY_BOARDINFO_LATE=y
- CONFIG_SPL_MAX_SIZE=0x40000
-diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
-index f284dadb99d..d87849f0a45 100644
--- a/configs/pinetab2-rk3566_defconfig
-+++ b/configs/pinetab2-rk3566_defconfig
-@@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/powkiddy-x55-rk3566_defconfig b/configs/powkiddy-x55-rk3566_defconfig
-index 37a359c91a9..70bc5ab6402 100644
--- a/configs/powkiddy-x55-rk3566_defconfig
-+++ b/configs/powkiddy-x55-rk3566_defconfig
-@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
-index 780fd581f0a..7938b5c0d1b 100644
--- a/configs/quartz64-a-rk3566_defconfig
-+++ b/configs/quartz64-a-rk3566_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
-index 4d92a67cd73..fe8a168373d 100644
--- a/configs/quartz64-b-rk3566_defconfig
-+++ b/configs/quartz64-b-rk3566_defconfig
-@@ -1,4 +1,6 @@
- CONFIG_ARM=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_SKIP_LOWLEVEL_INIT=y
- CONFIG_COUNTER_FREQUENCY=24000000
- CONFIG_ARCH_ROCKCHIP=y
-@@ -17,6 +19,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/quartzpro64-rk3588_defconfig b/configs/quartzpro64-rk3588_defconfig
-index 0ad74e8bbef..b9cbddfae77 100644
--- a/configs/quartzpro64-rk3588_defconfig
-+++ b/configs/quartzpro64-rk3588_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
-index 875f0b76fa5..2523dccd6a3 100644
--- a/configs/radxa-cm3-io-rk3566_defconfig
-+++ b/configs/radxa-cm3-io-rk3566_defconfig
-@@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig
-index 779d540e22d..7e003e74520 100644
--- a/configs/radxa-e25-rk3568_defconfig
-+++ b/configs/radxa-e25-rk3568_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/radxa-zero-3-rk3566_defconfig b/configs/radxa-zero-3-rk3566_defconfig
-index f5cf09a5e4a..7db7e3fcd3d 100644
--- a/configs/radxa-zero-3-rk3566_defconfig
-+++ b/configs/radxa-zero-3-rk3566_defconfig
-@@ -11,6 +11,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
-index 8b4d8c1b0aa..54baa07aeae 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
-+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
-@@ -21,6 +21,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- # CONFIG_ANDROID_BOOT_IMAGE is not set
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb"
- CONFIG_DISPLAY_BOARDINFO_LATE=y
-diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
-index e753185610f..19d303e7f70 100644
--- a/configs/rock-3a-rk3568_defconfig
-+++ b/configs/rock-3a-rk3568_defconfig
-@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock-3b-rk3568_defconfig b/configs/rock-3b-rk3568_defconfig
-index c3bf48b9e34..0cfa8eba168 100644
--- a/configs/rock-3b-rk3568_defconfig
-+++ b/configs/rock-3b-rk3568_defconfig
-@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
-index 417aa33a663..61d0e1b8c6a 100644
--- a/configs/rock-3c-rk3566_defconfig
-+++ b/configs/rock-3c-rk3566_defconfig
-@@ -16,6 +16,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock-4c-plus-rk3399_defconfig b/configs/rock-4c-plus-rk3399_defconfig
-index 0f6bdfdfb06..f31cb061a83 100644
--- a/configs/rock-4c-plus-rk3399_defconfig
-+++ b/configs/rock-4c-plus-rk3399_defconfig
-@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_EFI_CAPSULE_ON_DISK=y
- CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
- # CONFIG_ANDROID_BOOT_IMAGE is not set
-diff --git a/configs/rock-4se-rk3399_defconfig b/configs/rock-4se-rk3399_defconfig
-index 7f22aede912..caf8e02bece 100644
--- a/configs/rock-4se-rk3399_defconfig
-+++ b/configs/rock-4se-rk3399_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_EFI_CAPSULE_ON_DISK=y
- CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
- # CONFIG_ANDROID_BOOT_IMAGE is not set
-diff --git a/configs/rock-5-itx-rk3588_defconfig b/configs/rock-5-itx-rk3588_defconfig
-index cb014de4188..e26a126533c 100644
--- a/configs/rock-5-itx-rk3588_defconfig
-+++ b/configs/rock-5-itx-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock-5c-rk3588s_defconfig b/configs/rock-5c-rk3588s_defconfig
-index 3d044a81498..27234c250d1 100644
--- a/configs/rock-5c-rk3588s_defconfig
-+++ b/configs/rock-5c-rk3588s_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig
-index e5c9072c27f..35852c017da 100644
--- a/configs/rock-pi-4-rk3399_defconfig
-+++ b/configs/rock-pi-4-rk3399_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_EFI_CAPSULE_ON_DISK=y
- CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
- # CONFIG_ANDROID_BOOT_IMAGE is not set
-diff --git a/configs/rock-pi-4c-rk3399_defconfig b/configs/rock-pi-4c-rk3399_defconfig
-index 4be7b0f8130..eeee446a5bd 100644
--- a/configs/rock-pi-4c-rk3399_defconfig
-+++ b/configs/rock-pi-4c-rk3399_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_EFI_CAPSULE_ON_DISK=y
- CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
- # CONFIG_ANDROID_BOOT_IMAGE is not set
-diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
-index 602a723ea7d..3dcc2932ae3 100644
--- a/configs/rock-pi-n10-rk3399pro_defconfig
-+++ b/configs/rock-pi-n10-rk3399pro_defconfig
-@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- # CONFIG_ANDROID_BOOT_IMAGE is not set
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb"
- # CONFIG_CONSOLE_MUX is not set
-diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
-index 24b2eef35f2..c5830054921 100644
--- a/configs/rock5a-rk3588s_defconfig
-+++ b/configs/rock5a-rk3588s_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
-index da5fb3a2c30..053346fc035 100644
--- a/configs/rock5b-rk3588_defconfig
-+++ b/configs/rock5b-rk3588_defconfig
-@@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
-index db121f03ae6..e55f1b6a034 100644
--- a/configs/rock960-rk3399_defconfig
-+++ b/configs/rock960-rk3399_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
- CONFIG_SYS_PBSIZE=1052
- CONFIG_DISPLAY_BOARDINFO_LATE=y
-diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
-index 1d2bff35fc0..ea8e90b9f6a 100644
--- a/configs/rockpro64-rk3399_defconfig
-+++ b/configs/rockpro64-rk3399_defconfig
-@@ -20,6 +20,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
- CONFIG_DISPLAY_BOARDINFO_LATE=y
- CONFIG_SPL_MAX_SIZE=0x40000
-diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig
-index 00b9759715b..1b837bd554c 100644
--- a/configs/sige7-rk3588_defconfig
-+++ b/configs/sige7-rk3588_defconfig
-@@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_SPL_SPI=y
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig
-index 7de159a8881..4137f0459b5 100644
--- a/configs/soquartz-blade-rk3566_defconfig
-+++ b/configs/soquartz-blade-rk3566_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig
-index 4455ee5b5aa..ad63ba0204f 100644
--- a/configs/soquartz-cm4-rk3566_defconfig
-+++ b/configs/soquartz-cm4-rk3566_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
-index abdab514496..9e01345bdaa 100644
--- a/configs/soquartz-model-a-rk3566_defconfig
-+++ b/configs/soquartz-model-a-rk3566_defconfig
-@@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_BASE=0xFE660000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig
-index 105e8e10e0b..bcc2ae302a5 100644
--- a/configs/tiger-rk3588_defconfig
-+++ b/configs/tiger-rk3588_defconfig
-@@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
- # CONFIG_DEBUG_UART_BOARD_INIT is not set
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig
-index 14b231ae3e2..7af393731cd 100644
--- a/configs/toybrick-rk3588_defconfig
-+++ b/configs/toybrick-rk3588_defconfig
-@@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
- CONFIG_DEBUG_UART_BASE=0xFEB50000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-diff --git a/configs/turing-rk1-rk3588_defconfig b/configs/turing-rk1-rk3588_defconfig
-index 0b3efec23e6..515db2a2b0c 100644
--- a/configs/turing-rk1-rk3588_defconfig
-+++ b/configs/turing-rk1-rk3588_defconfig
-@@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_BASE=0xFEBC0000
- CONFIG_DEBUG_UART_CLOCK=24000000
- CONFIG_PCI=y
- CONFIG_DEBUG_UART=y
-+CONFIG_USE_PREBOOT=y
-+CONFIG_PREBOOT="pci enum; usb start; nvme scan;"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_SPL_FIT_SIGNATURE=y
-- 
-2.54.0
-
--- a/rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch
+++ b/rockchip-rk3568-nanopi-r5-Drop-duplicated-extra-sdhc.patch
@ -1,39 +0,0 @@
-From aef38432fbc93621b434836b95b10c28aa880e84 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 9 Dec 2025 20:51:06 +0000
-Subject: [PATCH 1/2] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci
-
-The pinctrl settings are now upstream, with the upstream
-voltage supplies, and the HS200 mode is confirmed to work
-fine but the HS400 mode had reported issues so let's just
-consume what the upstream DT has now as it's all known good.
-
-Reported-by: Dusty Mabe <dusty@dustymabe.com>
-Tested-by: Dusty Mabe <dusty@dustymabe.com>
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 8 --------
- 1 file changed, 8 deletions(-)
-
-diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
-index 64c43374c04..7e24be1a5e7 100644
--- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
-+++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
-@@ -12,14 +12,6 @@
- 	/delete-property/ vpcie3v3-supply;
- };
- 
-&sdhci {
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
-};
-
- &vcc5v0_usb_host {
- 	/delete-property/ regulator-always-on;
- 	/delete-property/ regulator-boot-on;
-- 
-2.52.0
-
--- a/rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch
+++ b/rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch
@ -1,33 +0,0 @@
-From 29efc0396809384cf37bfcfb01c62e63216fa998 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 9 Dec 2025 21:13:46 +0000
-Subject: [PATCH 2/2] rockchip: rk356x: Stop overriding sdhci/mmc aliases
-
-Upstream device tree has rules where the aliases are board
-specific settings, no SoC settings. Looking at upstream
-rk356x boards there's a lot of variation in the setting of
-mmc0/mmc1 based on the device so we should not be overriding
-this here and now we sync to upstream we should just consume
-those settings, to do otherwise confuses users.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- arch/arm/dts/rk356x-u-boot.dtsi | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
-index 738b9673d35..f25c7970208 100644
--- a/arch/arm/dts/rk356x-u-boot.dtsi
-+++ b/arch/arm/dts/rk356x-u-boot.dtsi
-@@ -7,8 +7,6 @@
- 
- / {
- 	aliases {
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc0;
- 		spi4 = &sfc;
- 	};
- 
-- 
-2.52.0
-
--- a/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
+++ b/rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
@ -0,0 +1,96 @@
+From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Mon, 10 Aug 2020 22:20:29 +0100
+Subject: [PATCH] rpi: Use firmware provided device tree
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/rpi_0_w_defconfig      | 2 +-
+ configs/rpi_2_defconfig        | 2 +-
+ configs/rpi_3_32b_defconfig    | 2 +-
+ configs/rpi_3_b_plus_defconfig | 2 +-
+ configs/rpi_3_defconfig        | 2 +-
+ configs/rpi_defconfig          | 2 +-
+ 6 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
+index bba5e12b12..0241f4c6d3 100644
+--- a/configs/rpi_0_w_defconfig
+++ b/configs/rpi_0_w_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
+index 1c2bbb29ce..9573e475f4 100644
+--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
+index b8a3d17f43..252df994e6 100644
+--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig
+index 4c361438fa..3b2996a2f9 100644
+--- a/configs/rpi_3_b_plus_defconfig
+++ b/configs/rpi_3_b_plus_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
+index 9b281a4f15..1e9ee6122e 100644
+--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
+index b5ad53c37b..223fc03275 100644
+--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
+CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+-- 
+2.26.2
+
--- a/rpi-bcm2835_sdhost-firmware-managed-clock.patch
+++ b/rpi-bcm2835_sdhost-firmware-managed-clock.patch
@ -0,0 +1,228 @@
+From f3a870bfa075fb880f5e018a0a5ae6f27ca8be49 Mon Sep 17 00:00:00 2001
+From: Vincent Fazio <vfazio@xes-inc.com>
+Date: Mon, 13 Sep 2021 13:34:45 -0500
+Subject: [PATCH] mmc: bcm2835-host: let firmware manage the clock
+
+Newer firmware supports managing the sdhost clock divisor, so leverage
+this feature if it is available.
+
+SET_SDHOST_CLOCK is largely undocumented except for its usage within the
+Linux kernel, which this change is based on.
+
+https://github.com/raspberrypi/linux/commit/3cd16c39c718e2dda7885c4ed7a20118aed12524
+
+Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
+---
+ arch/arm/mach-bcm283x/include/mach/mbox.h | 18 ++++++++
+ arch/arm/mach-bcm283x/include/mach/msg.h  | 10 +++++
+ arch/arm/mach-bcm283x/msg.c               | 30 +++++++++++++
+ drivers/mmc/bcm2835_sdhost.c              | 53 ++++++++++++++---------
+ 4 files changed, 90 insertions(+), 21 deletions(-)
+
+diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
+index 7dcac583cc4..9b1943fcfc4 100644
+--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
+@@ -252,6 +252,24 @@ struct bcm2835_mbox_tag_get_clock_rate {
+ 	} body;
+ };
+ 
+#define BCM2835_MBOX_TAG_SET_SDHOST_CLOCK	0x00038042
+
+struct bcm2835_mbox_tag_set_sdhost_clock {
+	struct bcm2835_mbox_tag_hdr tag_hdr;
+	union {
+		struct {
+			u32 rate_hz;
+			u32 rate_1;
+			u32 rate_2;
+		} req;
+		struct {
+			u32 rate_hz;
+			u32 rate_1;
+			u32 rate_2;
+		} resp;
+	} body;
+};
+
+ #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER	0x00040001
+ 
+ struct bcm2835_mbox_tag_allocate_buffer {
+diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
+index e45c1bf010f..ab37abdb6c6 100644
+--- a/arch/arm/mach-bcm283x/include/mach/msg.h
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
+@@ -22,6 +22,16 @@ int bcm2835_power_on_module(u32 module);
+  */
+ int bcm2835_get_mmc_clock(u32 clock_id);
+ 
+/**
+ * bcm2835_set_sdhost_clock() - determine if firmware controls sdhost cdiv
+ *
+ * @rate_hz: Input clock frequency
+ * @rate_1: Returns a clock frequency
+ * @rate_2: Returns a clock frequency
+ * @return 0 of OK, -EIO on error
+ */
+int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2);
+
+ /**
+  * bcm2835_get_video_size() - get the current display size
+  *
+diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
+index e2badfecb09..8c1c36a5f15 100644
+--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
+@@ -21,6 +21,12 @@ struct msg_get_clock_rate {
+ 	u32 end_tag;
+ };
+ 
+struct msg_set_sdhost_clock {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_set_sdhost_clock set_sdhost_clock;
+	u32 end_tag;
+};
+
+ struct msg_query {
+ 	struct bcm2835_mbox_hdr hdr;
+ 	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+@@ -111,6 +117,30 @@ int bcm2835_get_mmc_clock(u32 clock_id)
+ 	return clock_rate;
+ }
+ 
+int bcm2835_set_sdhost_clock(u32 rate_hz, u32 *rate_1, u32 *rate_2)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_sdhost_clock, msg_sdhost_clk, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_sdhost_clk);
+	BCM2835_MBOX_INIT_TAG(&msg_sdhost_clk->set_sdhost_clock, SET_SDHOST_CLOCK);
+
+	msg_sdhost_clk->set_sdhost_clock.body.req.rate_hz = rate_hz;
+	msg_sdhost_clk->set_sdhost_clock.body.req.rate_1 = *rate_1;
+	msg_sdhost_clk->set_sdhost_clock.body.req.rate_2 = *rate_2;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_sdhost_clk->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query sdhost clock rate\n");
+		return -EIO;
+	}
+
+	*rate_1 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_1;
+	*rate_2 = msg_sdhost_clk->set_sdhost_clock.body.resp.rate_2;
+
+	return 0;
+}
+
+ int bcm2835_get_video_size(int *widthp, int *heightp)
+ {
+ 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1);
+diff --git a/drivers/mmc/bcm2835_sdhost.c b/drivers/mmc/bcm2835_sdhost.c
+index 894dbdd6861..3a9cd6f1eb2 100644
+--- a/drivers/mmc/bcm2835_sdhost.c
+++ b/drivers/mmc/bcm2835_sdhost.c
+@@ -181,6 +181,7 @@ struct bcm2835_host {
+ 	struct udevice		*dev;
+ 	struct mmc		*mmc;
+ 	struct bcm2835_plat	*plat;
+	unsigned int 		firmware_sets_cdiv:1;
+ };
+ 
+ static void bcm2835_dumpregs(struct bcm2835_host *host)
+@@ -233,7 +234,7 @@ static void bcm2835_reset_internal(struct bcm2835_host *host)
+ 	msleep(20);
+ 	host->clock = 0;
+ 	writel(host->hcfg, host->ioaddr + SDHCFG);
+-	writel(host->cdiv, host->ioaddr + SDCDIV);
+	writel(SDCDIV_MAX_CDIV, host->ioaddr + SDCDIV);
+ }
+ 
+ static int bcm2835_wait_transfer_complete(struct bcm2835_host *host)
+@@ -598,6 +599,7 @@ static int bcm2835_transmit(struct bcm2835_host *host)
+ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
+ {
+ 	int div;
+	u32 clock_rate[2] = { 0 };
+ 
+ 	/* The SDCDIV register has 11 bits, and holds (div - 2).  But
+ 	 * in data mode the max is 50MHz wihout a minimum, and only
+@@ -620,26 +622,34 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
+ 	 * clock divisor at all times.
+ 	 */
+ 
+-	if (clock < 100000) {
+-		/* Can't stop the clock, but make it as slow as possible
+-		 * to show willing
+-		 */
+-		host->cdiv = SDCDIV_MAX_CDIV;
+-		writel(host->cdiv, host->ioaddr + SDCDIV);
+-		return;
+-	}
+	if (host->firmware_sets_cdiv) {
+		bcm2835_set_sdhost_clock(clock, &clock_rate[0], &clock_rate[1]);
+		clock = max(clock_rate[0], clock_rate[1]);
+	} else {
+		if (clock < 100000) {
+			/* Can't stop the clock, but make it as slow as possible
+			* to show willing
+			*/
+			host->cdiv = SDCDIV_MAX_CDIV;
+			writel(host->cdiv, host->ioaddr + SDCDIV);
+			return;
+		}
+ 
+-	div = host->max_clk / clock;
+-	if (div < 2)
+-		div = 2;
+-	if ((host->max_clk / div) > clock)
+-		div++;
+-	div -= 2;
+		div = host->max_clk / clock;
+		if (div < 2)
+			div = 2;
+		if ((host->max_clk / div) > clock)
+			div++;
+		div -= 2;
+ 
+-	if (div > SDCDIV_MAX_CDIV)
+-		div = SDCDIV_MAX_CDIV;
+		if (div > SDCDIV_MAX_CDIV)
+			div = SDCDIV_MAX_CDIV;
+
+		clock = host->max_clk / (div + 2);
+		host->cdiv = div;
+		writel(host->cdiv, host->ioaddr + SDCDIV);
+	}
+ 
+-	clock = host->max_clk / (div + 2);
+ 	host->mmc->clock = clock;
+ 
+ 	/* Calibrate some delays */
+@@ -647,9 +657,6 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
+ 	host->ns_per_fifo_word = (1000000000 / clock) *
+ 		((host->mmc->card_caps & MMC_MODE_4BIT) ? 8 : 32);
+ 
+-	host->cdiv = div;
+-	writel(host->cdiv, host->ioaddr + SDCDIV);
+-
+ 	/* Set the timeout to 500ms */
+ 	writel(host->mmc->clock / 2, host->ioaddr + SDTOUT);
+ }
+@@ -759,6 +766,7 @@ static int bcm2835_probe(struct udevice *dev)
+ 	struct bcm2835_host *host = dev_get_priv(dev);
+ 	struct mmc *mmc = mmc_get_mmc_dev(dev);
+ 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	u32 clock_rate[2] = { ~0 };
+ 
+ 	host->dev = dev;
+ 	host->mmc = mmc;
+@@ -776,6 +784,9 @@ static int bcm2835_probe(struct udevice *dev)
+ 
+ 	host->max_clk = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_CORE);
+ 
+	bcm2835_set_sdhost_clock(0, &clock_rate[0], &clock_rate[1]);
+	host->firmware_sets_cdiv = (clock_rate[0] != ~0);
+
+ 	bcm2835_add_host(host);
+ 
+ 	dev_dbg(dev, "%s -> OK\n", __func__);
--- a/rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch
+++ b/rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch
@ -1,256 +0,0 @@
-From patchwork Tue Aug  4 13:39:15 2026
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Gregor Herburger <gregor.herburger@linutronix.de>
-X-Patchwork-Id: 2280865
-X-Patchwork-Delegate: pbrobinson@gmail.com
-Return-Path: <u-boot-bounces@lists.u-boot-project.org>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@legolas.ozlabs.org
-Authentication-Results: legolas.ozlabs.org;
-	dkim=fail reason="signature verification failed" (2048-bit key;
- unprotected) header.d=lists.u-boot-project.org
- header.i=@lists.u-boot-project.org header.a=rsa-sha256 header.s=default
- header.b=DFFhfbAr;
-	dkim-atps=neutral
-Authentication-Results: legolas.ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.u-boot-project.org
- (client-ip=2605:bc80:3010::136; helo=smtp3.osuosl.org;
- envelope-from=u-boot-bounces@lists.u-boot-project.org;
- receiver=patchwork.ozlabs.org)
-Received: from smtp3.osuosl.org (smtp3.osuosl.org [IPv6:2605:bc80:3010::136])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange x25519 server-signature ECDSA (secp384r1) server-digest SHA384)
-	(No client certificate requested)
-	by legolas.ozlabs.org (Postfix) with ESMTPS id 4hDvm8025rz1xqD
-	for <incoming@patchwork.ozlabs.org>; Tue, 04 Aug 2026 23:39:35 +1000 (AEST)
-Received: from localhost (localhost [127.0.0.1])
-	by smtp3.osuosl.org (Postfix) with ESMTP id 2536960600;
-	Tue,  4 Aug 2026 13:39:34 +0000 (UTC)
-X-Virus-Scanned: amavis at osuosl.org
-Received: from smtp3.osuosl.org ([127.0.0.1])
- by localhost (smtp3.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP
- id T9Kb3BtsvOX4; Tue,  4 Aug 2026 13:39:33 +0000 (UTC)
-X-Comment: SPF check N/A for local connections - client-ip=140.211.166.142;
- helo=lists1.osuosl.org;
- envelope-from=u-boot-bounces@lists.u-boot-project.org; receiver=<UNKNOWN>
-DKIM-Filter: OpenDKIM Filter v2.11.0 smtp3.osuosl.org 4350560615
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-	d=lists.u-boot-project.org ; s=default; t=1785850773;
-	bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
-	h=From:Date:Subject:To:Cc:List-Id:List-Unsubscribe:List-Archive:
-	 List-Post:List-Help:List-Subscribe:From;
-	b=DFFhfbArDuHrxJEuZryw3QEVVVcavwAril7tcxulQVs6jkVOCAjh7GEuhkq8EyLIq
-	 suopR14b5dkKpVbbSr23u2v9jRgpynJQ5WBq6kIJSqjmZt58tZeMbaX76PRHjOs8+s
-	 QHatP0Vxf1ny0BOpVlZLZ/LlAsQhypNhW6/qjH0X9OLeNq0IFjSZ5faD3z463b62m0
-	 yMuPrAXa/kuPPInxGG6HsCPkRzFH3x9hM15r7ipSbXODTRXaVBSVScp03eAeo6zw/d
-	 nll/wcjCEe/78XX5o1Tsug951g7H8meDRnGQHJZtvbEmHdDB1wkTXYdFI2EGwnDxsz
-	 W3dcHoUveJgqQ==
-Received: from lists1.osuosl.org (lists1.osuosl.org [140.211.166.142])
-	by smtp3.osuosl.org (Postfix) with ESMTP id 4350560615;
-	Tue,  4 Aug 2026 13:39:33 +0000 (UTC)
-X-Original-To: u-boot@lists.u-boot-project.org
-Delivered-To: u-boot@lists.u-boot-project.org
-Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138])
- by lists1.osuosl.org (Postfix) with ESMTP id 3009E2BF
- for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:31 +0000 (UTC)
-Received: from localhost (localhost [127.0.0.1])
- by smtp1.osuosl.org (Postfix) with ESMTP id 222DC8086C
- for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:31 +0000 (UTC)
-X-Virus-Scanned: amavis at osuosl.org
-Received: from smtp1.osuosl.org ([127.0.0.1])
- by localhost (smtp1.osuosl.org [127.0.0.1]) (amavis, port 10024) with ESMTP
- id W5OoNRat257d for <u-boot@lists.u-boot-project.org>;
- Tue,  4 Aug 2026 13:39:30 +0000 (UTC)
-X-Greylist: delayed 94239 seconds by postgrey-1.37 at util1.osuosl.org;
- Tue, 04 Aug 2026 13:39:29 UTC
-DMARC-Filter: OpenDMARC Filter v1.4.2 smtp1.osuosl.org 1B0B580827
-DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org 1B0B580827
-Received-SPF: Pass (mailfrom) identity=mailfrom;
- client-ip=2a0a:51c0:0:12e:550::1; helo=galois.linutronix.de;
- envelope-from=gregor.herburger@linutronix.de; receiver=<UNKNOWN>
-Received: from galois.linutronix.de (Galois.linutronix.de
- [IPv6:2a0a:51c0:0:12e:550::1])
- by smtp1.osuosl.org (Postfix) with ESMTPS id 1B0B580827
- for <u-boot@lists.u-boot-project.org>; Tue,  4 Aug 2026 13:39:29 +0000 (UTC)
-From: Gregor Herburger <gregor.herburger@linutronix.de>
-Date: Tue, 04 Aug 2026 15:39:15 +0200
-Subject: [PATCH v3] rpi: copy /chosen/bootloader partition and set
- boot_partition
-MIME-Version: 1.0
-Message-Id: <20260804-tryboot2-v3-1-b0bc282a923b@linutronix.de>
-X-B4-Tracking: v=1; b=H4sIAILrcWoC/22OywrCMBBFf0WyNpKHbYor/0O6SNOJjWgiSRpaS
- v/dpCKCyKwO3HvmLiiANxDQabcgD8kE42wGvt8hNUh7BWz6zIgRVpOGcBz93DkXGW5UxRjlooZ
- Kohx/etBm2lSX9s1h7G6gYumXhPbugePgQX6VgjQfJU4U5+OSHiVIpQU9340do3fWTIceimIwI
- To/b3MTK6/+LEssezhRRFDNAGj142nXdX0BG/Mh6/kAAAA=
-X-Change-ID: 20260803-tryboot2-8c5221376e5a
-To: u-boot@lists.u-boot-project.org
-Cc: Matthias Brugger <mbrugger@suse.com>,
-  Peter Robinson <pbrobinson@gmail.com>, Tom Rini <trini@konsulko.com>,
-	=?utf-8?q?Filip_Kokosi=C5=84ski?= <filip.kokosinski@gmail.com>,
-  Ilias Apalodimas <ilias.apalodimas@linaro.org>,
-  Gregor Herburger <gregor.herburger@linutronix.de>
-X-Developer-Signature: v=1; a=ed25519-sha256; t=1785850764; l=3191;
- i=gregor.herburger@linutronix.de; s=20260226; h=from:subject:message-id;
- bh=4mVT/kFDHBnjUUlqljWBZ+t7aLa+t+gE+t/hUJ4uc5g=;
- b=TBKoGScdkXGUfpGLvpVtYHkg4LDoOR/8M/do2dqU2QlR+9Z9YFNN6x88pDC7UIDeXrJS+Hpeg
- e3YsfK6fOcoBgXOuzz3Aabmmn9//OQN7WG6Vz15rSxX0uVZ96TFcvf5
-X-Developer-Key: i=gregor.herburger@linutronix.de; a=ed25519;
- pk=u72Lv7+/lS5CC1hmSrb17lv/6CK7HBh4Lvz77PHA5LM=
-X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
- d=linutronix.de; s=2020; t=1785850765;
- h=from:from:reply-to:subject:subject:date:date:message-id:message-id:
- to:to:cc:cc:mime-version:mime-version:content-type:content-type:
- content-transfer-encoding:content-transfer-encoding;
- bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
- b=plU5oAFojHvTlDhOGINsdXnnc0AnS9OY0C4LB9dSy9uyrPKBBpLWGWj3xmNoX87lLZlhO9
- z0H+R5gqw5NfxbTVYFHqZnW+pW4xJQFW9fMYSU8/k2RRg9JEqP+NrZ8Y720ujlycxn05vP
- sF7cD+TEsxvyBhnbRyq82obvpdQIYj0D6T3UkHyz0U4G+5k8dVhhv/mqGaSfY8xW4cCl5G
- gIE2QIsuzB4g4pQoW70DrLd7cyqqDM0iDrrXFZL2a7DlnYgbe1ULVXMl05UMMQGfBkHmog
- pt8e+zvO4AVA3G8CKcUQhhWOZm7uycUpdrNuyPKg9K7JB6MEd9dHbucVa+v8Yg==
-X-Mailman-Original-DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed;
- d=linutronix.de; s=2020e; t=1785850765;
- h=from:from:reply-to:subject:subject:date:date:message-id:message-id:
- to:to:cc:cc:mime-version:mime-version:content-type:content-type:
- content-transfer-encoding:content-transfer-encoding;
- bh=Tj3LONeiWXn0Cn5KPSYhoff9avwde4nWUGEguAWdLbE=;
- b=NAMrZHs0ETYIMiwBHLvCoR3NOcg/kwkAxVRq6Q/pdhfkQJjxtHU3mZFV520QjbE1yeix0S
- nJyAqHgyKVlRiZCw==
-X-Mailman-Original-Authentication-Results: smtp1.osuosl.org;
- dmarc=pass (p=none dis=none)
- header.from=linutronix.de
-X-Mailman-Original-Authentication-Results: smtp1.osuosl.org;
- dkim=pass (2048-bit key, unprotected) header.d=linutronix.de
- header.i=@linutronix.de header.a=rsa-sha256 header.s=2020 header.b=plU5oAFo;
- dkim=pass header.d=linutronix.de header.i=@linutronix.de
- header.a=ed25519-sha256 header.s=2020e header.b=NAMrZHs0
-X-BeenThere: u-boot@lists.u-boot-project.org
-X-Mailman-Version: 2.1.30
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.u-boot-project.org>
-List-Unsubscribe: <https://lists.u-boot-project.org/mailman/options/u-boot>,
- <mailto:u-boot-request@lists.u-boot-project.org?subject=unsubscribe>
-List-Archive: <http://lists.u-boot-project.org/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.u-boot-project.org>
-List-Help: <mailto:u-boot-request@lists.u-boot-project.org?subject=help>
-List-Subscribe: <https://lists.u-boot-project.org/mailman/listinfo/u-boot>,
- <mailto:u-boot-request@lists.u-boot-project.org?subject=subscribe>
-Errors-To: u-boot-bounces@lists.u-boot-project.org
-Sender: "U-Boot" <u-boot-bounces@lists.u-boot-project.org>
-
-The Raspberry Pi has the "tryboot" feature where it can boot from a
-different partition enabling failsafe A/B updates. After boot the
-firmware sets 'partition' property in /chosen/bootloader.
-
-Copy the /chosen/bootloader node to the device tree.
-
-Set the env variable boot_partition accordingly to allow boards to
-create a bootcmd based on the boot partition.
-
-Reviewed-by: Matthias Brugger <mbrugger@suse.com>
-Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
---
-Changes in v3:
- Copy the complete '/chosen/bootloader' node instead of only the
-  partition property
- Link to v2: https://patch.msgid.link/20260803-tryboot2-v2-1-30c071f2ee15@linutronix.de
-
-Changes in v2:
- update Reviewed-by tag
---
- board/raspberrypi/rpi/rpi.c | 51 +++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
-
---
-base-commit: baa64b2f892890f00a377eac4a3e685472bb56b5
-change-id: 20260803-tryboot2-8c5221376e5a
-
-Best regards,
--  
-Gregor Herburger <gregor.herburger@linutronix.de>
-
-diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
-index 1da5df92351c..ba8a2c1ba4cf 100644
--- a/board/raspberrypi/rpi/rpi.c
-+++ b/board/raspberrypi/rpi/rpi.c
-@@ -480,6 +480,20 @@ static void set_serial_number(void)
- 	env_set("serial#", serial_string);
- }
- 
-+static void set_boot_partition_fdt(void)
-+{
-+	void *fdtp = (void *)gd->fdt_blob;
-+	u32 partition;
-+
-+	partition = fdt_getprop_u32_default(fdtp, "/chosen/bootloader", "partition", 1);
-+	if (!partition) {
-+		printf("Failed to the get partition property.\n");
-+		return;
-+	}
-+
-+	env_set_ulong("boot_partition", partition);
-+}
-+
- int misc_init_r(void)
- {
- 	set_fdt_addr();
-@@ -489,6 +503,7 @@ int misc_init_r(void)
- 	set_board_info();
- #endif
- 	set_serial_number();
-+	set_boot_partition_fdt();
- 
- 	return 0;
- }
-@@ -579,6 +594,39 @@ int board_fdt_blob_setup(void **fdtp)
- 	return 0;
- }
- 
-+int copy_node_all_properties(void *dst, void *src, const char *path, const char *node)
-+{
-+	int src_parent, dst_parent;
-+	int src_node, dst_node;
-+	int prop;
-+	int len;
-+
-+	src_parent = fdt_path_offset(src, path);
-+	dst_parent = fdt_path_offset(dst, path);
-+	if (src_parent < 0 || dst_parent < 0)
-+		return -1;
-+
-+	src_node = fdt_subnode_offset(src, src_parent, node);
-+	if (src_node < 0)
-+		return -1;
-+
-+	dst_node = fdt_find_or_add_subnode(dst, dst_parent, node);
-+	if (dst_node < 0)
-+		return -1;
-+
-+	fdt_for_each_property_offset(prop, src, src_node) {
-+		const char *name;
-+		const void *value = fdt_getprop_by_offset(src, prop, &name, &len);
-+
-+		if (!value || !name)
-+			continue;
-+
-+		fdt_setprop(dst, dst_node, name, value, len);
-+	}
-+
-+	return 0;
-+}
-+
- int copy_property(void *dst, void *src, char *path, char *property)
- {
- 	int dst_offset, src_offset;
-@@ -641,6 +689,9 @@ void  update_fdt_from_fw(void *fdt, void *fw_fdt)
- 
- 	/* copy uart clk as provided by the firmware */
- 	copy_property(fdt, fw_fdt, "/clocks/clk-uart", "clock-frequency");
-+
-+	/* Copy the bootloader node */
-+	copy_node_all_properties(fdt, fw_fdt, "/chosen", "bootloader");
- }
- 
- int ft_board_setup(void *blob, struct bd_info *bd)
--- a/rpi-fallback-to-max-clock-for-mmc.patch
+++ b/rpi-fallback-to-max-clock-for-mmc.patch
@ -0,0 +1,77 @@
+From 71ba043e5c5575f3d86536acade70dab6599489b Mon Sep 17 00:00:00 2001
+From: Vincent Fazio <vfazio@xes-inc.com>
+Date: Mon, 13 Sep 2021 11:22:30 -0500
+Subject: [PATCH] arm: rpi: fallback to max clock rate for MMC clock
+
+In rpi-firmware 25e2b597ebfb2495eab4816a276758dcc6ea21f1 and later,
+the GET_CLOCK_RATE mailbox property was changed to return the last
+value set by SET_CLOCK_RATE.
+
+https://github.com/raspberrypi/firmware/issues/1619#issuecomment-917025502
+
+U-Boot does not call SET_CLOCK_RATE so bcm2835_get_mmc_clock will
+return zero and can cause degraded MMC performance.
+
+Calling SET_CLOCK_RATE fixes the frequency of the clock to a specific
+value and disables the firmware's clock scaling so is not an option.
+
+Instead, fallback to GET_MAX_CLOCK_RATE in bcm2835_get_mmc_clock if
+GET_CLOCK_RATE returns zero.
+
+Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
+---
+ arch/arm/mach-bcm283x/include/mach/mbox.h |  2 ++
+ arch/arm/mach-bcm283x/msg.c               | 20 +++++++++++++++++++-
+ 2 files changed, 21 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
+index 2ae2d3d97c3..7dcac583cc4 100644
+--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
+@@ -224,6 +224,8 @@ struct bcm2835_mbox_tag_set_power_state {
+ };
+ 
+ #define BCM2835_MBOX_TAG_GET_CLOCK_RATE	0x00030002
+#define BCM2835_MBOX_TAG_GET_MAX_CLOCK_RATE	0x00030004
+#define BCM2835_MBOX_TAG_GET_MIN_CLOCK_RATE	0x00030007
+ 
+ #define BCM2835_MBOX_CLOCK_ID_EMMC	1
+ #define BCM2835_MBOX_CLOCK_ID_UART	2
+diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
+index 347aece3cd8..e2badfecb09 100644
+--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
+@@ -75,6 +75,7 @@ int bcm2835_get_mmc_clock(u32 clock_id)
+ {
+ 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
+ 	int ret;
+	u32 clock_rate = 0;
+ 
+ 	ret = bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
+ 	if (ret)
+@@ -90,7 +91,24 @@ int bcm2835_get_mmc_clock(u32 clock_id)
+ 		return -EIO;
+ 	}
+ 
+-	return msg_clk->get_clock_rate.body.resp.rate_hz;
+	clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz;
+
+	if (clock_rate == 0)
+	{
+		BCM2835_MBOX_INIT_HDR(msg_clk);
+		BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_MAX_CLOCK_RATE);
+		msg_clk->get_clock_rate.body.req.clock_id = clock_id;
+
+		ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+		if (ret) {
+			printf("bcm2835: Could not query max eMMC clock rate\n");
+			return -EIO;
+		}
+
+		clock_rate = msg_clk->get_clock_rate.body.resp.rate_hz;
+	}
+
+	return clock_rate;
+ }
+ 
+ int bcm2835_get_video_size(int *widthp, int *heightp)
--- a/2
+++ b/2
@ -1 +1 @@
-SHA512 (u-boot-v2026.10-rc3.tar.bz2) = e993f5d78a1ac0eb11f00e3730ff23eb880e206036f78c3eb74852b846a23d59111b4b07f4ced2c88c61a8c1627036c3cc32717c0efcf819376c5cd0a34183d2
+SHA512 (u-boot-2021.10.tar.bz2) = be5be1c9a54b270307a04177d5577a21c57a02b307bf8b63d0fa2655d1f025c7ce010dca6a1f7f60d4e639c2e6fb6f0a292a2e5d190f1fad478eb12dd786c9da
--- a/uboot-tools.spec
+++ b/uboot-tools.spec
@ -1,90 +1,59 @@
-%global candidate rc3
-%if 0%{?rhel}
-%bcond_with toolsonly
-%else
-%bcond_without toolsonly
-%endif
-
-# Set it to "opensbi" (stable) or "opensbi-unstable" (unstable, git)
-%global opensbi opensbi
+#global candidate rc5

 Name:     uboot-tools
-Version:  2026.10
-Release:  0.3%{?candidate:.%{candidate}}%{?dist}
-Epoch:    1
+Version:  2021.10
+Release:  3%{?candidate:.%{candidate}}%{?dist}
 Summary:  U-Boot utilities
-# Automatically converted from old format: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ - review is highly recommended.
-License:  GPL-2.0-or-later AND LicenseRef-Callaway-BSD AND LGPL-2.1-or-later AND LGPL-2.0-or-later
-URL:      https://u-boot-project.org/
+License:  GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
+URL:      http://www.denx.de/wiki/U-Boot
+
 ExcludeArch: s390x
-Source0:  https://git.u-boot-project.org/u-boot/u-boot/-/archive/v%{version}%{?candidate:-%{candidate}}/u-boot-v%{version}%{?candidate:-%{candidate}}.tar.bz2
-Source1:  aarch64-boards
-Source2:  riscv64-boards
-Source3:  x86_64-boards
+Source0:  https://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
+Source1:  arm-boards
+Source2:  aarch64-boards

-# Fedora patches to enable/disable features
-Patch1:   disable-VBE-by-default.patch
-Patch2:   enable-bootmenu-by-default.patch
-# This is now legacy, most devices use bootflow, we keep this for the laggards
-Patch3:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
-# Identify VFAT partitions as ESP, allows EFI setvar on our images
-Patch4:   uefi-Add-all-options-for-EFI-System-Partitions.patch
-# New function to find fdt for loading from disk
-Patch5:   uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch
-# Enable UEFI SetVariable for devices without backed storage
-Patch6:   uefi-enable-SetVariableRT-with-volotile-storage.patch
-# Enable UEFI HTTPS boot for all Fedora firmware
-Patch7:   uefi-enable-https-boot-by-default.patch
-
-# Device improvments
-# USB-PD improvements
-Patch10:  USB-PD-TCPM-improvements.patch
+# Fedoraisms patches
+# Needed to find DT on boot partition that's not the first partition
+Patch1:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
+# Board fixes and enablement
+# RPi - uses RPI firmware device tree for HAT support
+Patch2:   rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
+Patch3:   rpi-fallback-to-max-clock-for-mmc.patch
+Patch4:   rpi-bcm2835_sdhost-firmware-managed-clock.patch
+# AllWinner improvements
+Patch10:  AllWinner-PineTab.patch
+# TI fixes
+Patch11:  0001-Fix-BeagleAI-detection.patch
 # Rockchips improvements
-Patch11:  rockchip-Enable-preboot-start-for-pci-usb.patch
-Patch13:  rockchip-rk356x-Stop-overriding-sdhci-mmc-aliases.patch
-# Jetson fixes
-Patch14:  p3450-fix-board.patch
-Patch15:  JetsonTX2-Fix-upstream-device-tree-naming.patch
-# Fix AllWinner
-Patch16:  Allwinner-fix-booting-on-a-number-of-devices.patch
-# RPi
-Patch20:  Fix-NVMe-not-only-on-Raspberry-Pi-5.patch
-Patch21:  raspberrypi-Add-quirk-for-RPi5-2Gb-rev-1.0.patch
-Patch22:  rpi-copy-chosen-bootloader-partition-and-set-boot_partition.patch
+Patch12:  phy-rockchip-inno-usb2-fix-hang-when-multiple-controllers-exit.patch
+Patch13:  0001-Revert-spi-spi-uclass-Add-support-to-manually-reloca.patch
+Patch14:  0001-enable-hs400-and-sdma-support.patch
+Patch15:  dts-rockchip-rk3399-enable-emmc-phy-for-spl.patch

 BuildRequires:  bc
-BuildRequires:  bison
 BuildRequires:  dtc
-BuildRequires:  flex
-BuildRequires:  gcc
-BuildRequires:  gnutls-devel
-BuildRequires:  libuuid-devel
 BuildRequires:  make
-BuildRequires:  ncurses-devel
-%if 0%{?fedora} > 44
-BuildRequires:  openssl3-devel
-BuildRequires:  openssl3-devel-engine
-%else
-BuildRequires:  openssl-devel
-BuildRequires:  openssl-devel-engine
-%endif
 BuildRequires:  perl-interpreter
+# Requirements for building on el7
+%if 0%{?rhel} == 7
+BuildRequires:  devtoolset-7-build
+BuildRequires:  devtoolset-7-binutils
+BuildRequires:  devtoolset-7-gcc
+BuildRequires:  python2-devel
+BuildRequires:  python2-setuptools
+BuildRequires:  python2-libfdt
+%else
+BuildRequires:  gcc
 BuildRequires:  python3-devel
 BuildRequires:  python3-setuptools
 BuildRequires:  python3-libfdt
-BuildRequires:  SDL2-devel
+%endif
+BuildRequires:  flex bison
+BuildRequires:  openssl-devel
+BuildRequires:  SDL-devel
 BuildRequires:  swig
-%if %{with toolsonly}
 %ifarch aarch64
 BuildRequires:  arm-trusted-firmware-armv8
-BuildRequires:  optee-os-firmware-armv8
-BuildRequires:  crust-firmware
-BuildRequires:  python3-pyelftools
-BuildRequires:  xxd
-%endif
-%ifarch riscv64
-BuildRequires:  %{opensbi}
-%endif
 %endif
 Requires:       dtc

@ -92,7 +61,6 @@ Requires:       dtc
 This package contains a few U-Boot utilities - mkimage for creating boot images
 and fw_printenv/fw_setenv for manipulating the boot environment variables.

-%if %{with toolsonly}
 %ifarch aarch64
 %package     -n uboot-images-armv8
 Summary:     U-Boot firmware images for aarch64 boards
@ -102,101 +70,86 @@ BuildArch:   noarch
 U-Boot firmware binaries for aarch64 boards
 %endif

-%ifarch riscv64
-%package     -n uboot-images-riscv64
-Summary:     U-Boot firmware images for riscv64 boards
+%ifarch %{arm}
+%package     -n uboot-images-armv7
+Summary:     U-Boot firmware images for armv7 boards
 BuildArch:   noarch

-%description -n uboot-images-riscv64
-U-Boot firmware binaries for riscv64 boards
-%endif
-
-%ifarch x86_64
-%package     -n uboot-images-x86_64
-Summary:     U-Boot firmware images for x86_64 boards
-BuildArch:   noarch
-
-%description -n uboot-images-x86_64
-U-Boot firmware binaries for x86_64 boards
-%endif
+%description -n uboot-images-armv7
+U-Boot firmware binaries for armv7 boards
 %endif

 %prep
-%autosetup -p1 -n u-boot-v%{version}%{?candidate:-%{candidate}}
+%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}

-cp %SOURCE1 %SOURCE2 %SOURCE3 .
+cp %SOURCE1 %SOURCE2 .

 %build
 mkdir builds

+%if 0%{?rhel} == 7
+#Enabling DTS for .el7
+%{?enable_devtoolset7:%{enable_devtoolset7}}
+%endif
+
 %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
 %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/

-%if %{with toolsonly}
-# OpenSBI firmware is distributed in U-Boot SPL images
-%ifarch riscv64
-export OPENSBI=%{_datadir}/%{opensbi}/generic/firmware/fw_dynamic.bin
-%endif
+# U-Boot device firmwares don't currently support LTO
+%define _lto_cflags %{nil}

-%ifarch aarch64 riscv64 x86_64
+%ifarch aarch64 %{arm}
 for board in $(cat %{_arch}-boards)
 do
  echo "Building board: $board"
  mkdir builds/$(echo $board)/

  # ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
-  sun50i=(a64-olinuxino a64-olinuxino-emmc amarula_a64_relic bananapi_m64 nanopi_a64 oceanic_5205_5inmfd orangepi_win pine64-lts pine64_plus pine64_plus pinebook pinephone pinephone pinetab sopine_baseboard teres_i)
+  sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i)
  if [[ " ${sun50i[*]} " == *" $board "* ]]; then
    echo "Board: $board using sun50i_a64"
-    cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31
-    cp /usr/share/crust-firmware/a64/scp.bin builds/$(echo $board)/
+    cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
  fi
-  sun50h5=(bananapi_m2_plus_h5 emlid_neutis_n5_devboard libretech_all_h3_cc_h5 libretech_all_h3_it_h5 libretech_all_h5_cc_h5 nanopi_neo2 nanopi_neo_plus2 nanopi_r1s_h5 orangepi_pc2 orangepi_prime orangepi_zero_plus2 orangepi_zero_plus)
-  if [[ " ${sun50h5[*]} " == *" $board "* ]]; then
-    echo "Board: $board using sun50i_h6"
-    cp /usr/share/arm-trusted-firmware/sun50i_a64/bl31.bin builds/$(echo $board)/atf-bl31
-    cp /usr/share/crust-firmware/h5/scp.bin builds/$(echo $board)/
-  fi
-  sun50h6=(beelink_gs1 emlid_neutis_n5_devboard orangepi_3 orangepi_lite2 orangepi_one_plus pine_h64 tanix_tx6)
+  sun50h6=(beelink_gs1 orangepi_3 orangepi_lite2 orangepi_one_plus orangepi_zero2 pine_h64 tanix_tx6)
  if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
    echo "Board: $board using sun50i_h6"
-    cp /usr/share/arm-trusted-firmware/sun50i_h6/bl31.bin builds/$(echo $board)/atf-bl31
-    cp /usr/share/crust-firmware/h6/scp.bin builds/$(echo $board)/
+    cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
  fi
-  sun50i_h616=(anbernic_rg35xx_h700 orangepi_zero2 orangepi_zero2w orangepi_zero3 transpeed-8k618-t x96_mate)
-  if [[ " ${sun50i_h616[*]} " == *" $board "* ]]; then
-    echo "Board: $board using sun50i_h616"
-    cp /usr/share/arm-trusted-firmware/sun50i_h616/bl31.bin builds/$(echo $board)/atf-bl31
-  fi
-  rk3328=(evb-rk3328 generic-rk3328 nanopi-r2c-plus-rk3328 nanopi-r2c-rk3328 nanopi-r2s-rk3328 nanopi-r2s-plus-rk3328 orangepi-r1-plus-lts-rk3328 orangepi-r1-plus-rk3328 roc-cc-rk3328 rock64-rk3328 rock-pi-e-rk3328 rock-pi-e-v3-rk3328)
+  rk3328=(evb-rk3328 nanopi-r2s-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328)
  if [[ " ${rk3328[*]} " == *" $board "* ]]; then
    echo "Board: $board using rk3328"
-    cp /usr/share/arm-trusted-firmware/rk3328/bl31.elf builds/$(echo $board)/atf-bl31
+    cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
  fi
-  rk3368=(evb-px5 geekbox)
-  if [[ " ${rk3368[*]} " == *" $board "* ]]; then
-    echo "Board: $board using rk3368"
-    cp /usr/share/arm-trusted-firmware/rk3368/bl31.elf builds/$(echo $board)/atf-bl31
-  fi
-  rk3399=(eaidk-610-rk3399 evb-rk3399 ficus-rk3399 firefly-rk3399 generic-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 pinephone-pro-rk3399 puma-rk3399 rock-4c-plus-rk3399 rock-4se-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
+  rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 leez-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4b-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 nanopi-r4s-rk3399 orangepi-rk3399 pinebook-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
  if [[ " ${rk3399[*]} " == *" $board "* ]]; then
    echo "Board: $board using rk3399"
    cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
-    cp builds/$(echo $board)/bl31.elf builds/$(echo $board)/atf-bl31
-  fi
-  zynqmp=(xilinx_zynqmp_kria xilinx_zynqmp_virt)
-  if [[ " ${zynqmp[*]} " == *" $board "* ]]; then
-    echo "Board: $board using zynqmp"
-    cp /usr/share/arm-trusted-firmware/zynqmp/bl31.bin builds/$(echo $board)/atf-bl31
  fi
  # End ATF

  make $(echo $board)_defconfig O=builds/$(echo $board)/
-  BL31=builds/$(echo $board)/atf-bl31 %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/
+  %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/

+  # build spi images for rockchip boards with SPI flash
+  rkspi=(evb-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 pinebook-pro-rk3399 rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
+  if [[ " ${rkspi[*]} " == *" $board "* ]]; then
+    echo "Board: $board with SPI flash"
+    builds/$(echo $board)/tools/mkimage -n rk3399 -T rkspi -d builds/$(echo $board)/tpl/u-boot-tpl.bin:builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/idbloader.spi
+  fi
+  # build spi, and uart images for mvebu boards
+  # mvebu=(clearfog helios4 turris_omnia)
+  if [[ "  ${mvebu[*]} " == *" $board "* ]]; then
+    for target in spi uart
+    do
+      echo "Board: $board Target: $target"
+      sed -i -e '/CONFIG_MVEBU_SPL_BOOT_DEVICE_/d' configs/$(echo $board)_defconfig
+      echo CONFIG_MVEBU_SPL_BOOT_DEVICE_${target^^}=y >> configs/$(echo $board)_defconfig
+      make $(echo $board)_defconfig O=builds/$(echo $board-$target)/
+      %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board-$target)/
+    done
+  fi
 done

-%endif
 %endif

 %install
@ -204,370 +157,322 @@ mkdir -p %{buildroot}%{_bindir}
 mkdir -p %{buildroot}%{_mandir}/man1
 mkdir -p %{buildroot}%{_datadir}/uboot/

-%if %{with toolsonly}
 %ifarch aarch64
 for board in $(ls builds)
 do
- for file in u-boot.bin u-boot.img u-boot-dtb.img u-boot-sunxi-with-spl.bin u-boot-rockchip-spi.bin u-boot-rockchip.bin
+ mkdir -p %{buildroot}%{_datadir}/uboot/$(echo $board)/
+ for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img idbloader.spi spl/boot.bin spl/sunxi-spl.bin
 do
  if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
-  fi
- done
-done
-
-# Just for xilinx_zynqmp
-for board in "xilinx_zynqmp_kria xilinx_zynqmp_virt"
-do
- for file in u-boot.itb spl/boot.bin
- do
-  if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
-  fi
- done
-done
-
-# For Apple M-series we also need the nodtb variant
-install -pD -m 0644 builds/apple_m1/u-boot-nodtb.bin %{buildroot}%{_datadir}/uboot/apple_m1/u-boot-nodtb.bin
-%endif
-
-%ifarch riscv64
-for board in $(ls builds)
-do
- for file in u-boot.itb spl/u-boot-spl.bin spl/u-boot-spl.bin.normal.out
- do
-  if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/
  fi
 done
 done
 %endif

-%ifarch x86_64
+%ifarch %{arm}
 for board in $(ls builds)
 do
- for file in u-boot.rom
+ mkdir -p %{buildroot}%{_datadir}/uboot/$(echo $board)/
+ for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-rockchip.bin u-boot-sunxi-with-spl.bin spl/boot.bin
 do
  if [ -f builds/$(echo $board)/$(echo $file) ]; then
-    install -pD -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/$(echo $file)
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) %{buildroot}%{_datadir}/uboot/$(echo $board)/
  fi
 done
 done
 %endif

 # Bit of a hack to remove binaries we don't use as they're large
+%ifarch aarch64 %{arm}
 for board in $(ls builds)
 do
  rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.dtb
  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.*
  fi
-  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-rockchip.bin ]; then
-    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.*
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/MLO ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/SPL ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.kwb ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.*
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot-spl.bin
+  fi
+  if [ -f %{buildroot}%{_datadir}/uboot/$(echo $board)/idbloader.img ]; then
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot.bin
+    rm -f %{buildroot}%{_datadir}/uboot/$(echo $board)/u-boot{,-dtb}.img
  fi
 done
 %endif

-for tool in dumpimage env/fw_printenv fdt_add_pubkey fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc ifwitool img2srec kwboot mkeficapsule mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder
+for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes kwboot
 do
 install -p -m 0755 builds/tools/$tool %{buildroot}%{_bindir}
 done
-for tool in dumpimage kwboot mkeficapsule mkimage
-do
-install -p -m 0644 doc/$tool.1 %{buildroot}%{_mandir}/man1
-done
+install -p -m 0644 doc/mkimage.1 %{buildroot}%{_mandir}/man1

 install -p -m 0755 builds/tools/env/fw_printenv %{buildroot}%{_bindir}
 ( cd %{buildroot}%{_bindir}; ln -sf fw_printenv fw_setenv )

+# Copy some useful docs over
+mkdir -p builds/docs
+cp -p board/hisilicon/hikey/README builds/docs/README.hikey
+cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
+cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
+cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
+cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
+cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
+cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
+cp -p board/ti/am335x/README builds/docs/README.am335x
+cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
+cp -p board/udoo/README builds/docs/README.udoo
+cp -p board/wandboard/README builds/docs/README.wandboard
+cp -p board/warp/README builds/docs/README.warp
+cp -p board/warp7/README builds/docs/README.warp7
+
 %files
-%license Licenses/*
-%doc README doc/develop/distro.rst doc/README.gpt
-%doc doc/develop/uefi doc/usage doc/arch/arm64.rst
+%doc README doc/README.kwbimage doc/README.distro doc/README.gpt
+%doc doc/README.odroid doc/README.rockchip doc/develop/uefi doc/uImage.FIT doc/arch/arm64.rst
+%doc builds/docs/* doc/board/amlogic/ doc/board/rockchip/
 %{_bindir}/*
-%{_mandir}/man1/dumpimage.1*
-%{_mandir}/man1/kwboot.1*
-%{_mandir}/man1/mkeficapsule.1*
 %{_mandir}/man1/mkimage.1*
+%dir %{_datadir}/uboot/

-%if %{with toolsonly}
 %ifarch aarch64
 %files -n uboot-images-armv8
-%license Licenses/*
-%dir %{_datadir}/uboot/
 %{_datadir}/uboot/*
 %endif

-%ifarch riscv64
-%files -n uboot-images-riscv64
-%license Licenses/*
-%dir %{_datadir}/uboot/
+%ifarch %{arm}
+%files -n uboot-images-armv7
 %{_datadir}/uboot/*
 %endif

-%ifarch x86_64
-%files -n uboot-images-x86_64
-%license Licenses/*
-%dir %{_datadir}/uboot/
-%{_datadir}/uboot/*
-%endif
-%endif
-
 %changelog
-* Thu Aug 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.3.rc3
- Update to 2026.10 RC3
+* Mon Nov 15 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-3
+- Fixes for rk3399 devices

-* Wed Aug 12 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.2.rc2
- Update to 2026.10 RC2
+* Thu Oct 14 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-2
+- Fix booting from MMC for Rockchip 3399 (rhbz #2014182)
+- Enable new rk3399 devices (Leez, NanoPi-M4B, NanoPi-4S, NanoPi-T4) (rhbz #2009126)

-* Thu Jul 30 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.10-0.1.rc1
- Update to 2026.10 RC1
- Update source URL
+* Mon Oct 04 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-1
+- Update to 2021.10

-* Fri Jul 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1:2026.07-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_45_Mass_Rebuild
+* Mon Sep 27 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.7.rc5
+- Update to 2021.10 RC5

-* Tue Jul 07 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-1
- Update to 2026.07 GA
+* Wed Sep 15 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.6.rc4
+- Update to 2021.10 RC4
+- Proposed fix for RPi MMC clock issue

-* Tue Jun 23 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.4.rc5
- Update to 2026.07 RC5
+* Tue Sep 14 2021 Sahana Prasad <sahana@redhat.com> - 2021.10-0.6.rc3
+- Rebuilt with OpenSSL 3.0.0

-* Mon Jun 08 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.3.rc4
- Update to 2026.07 RC4
+* Mon Aug 30 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.5.rc3
+- Update to 2021.10 RC3

-* Fri May 29 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.2.rc3
- Update to 2026.07 RC3
- Update U-Boot Project URL
- Update RPi PCIe patches
- Various RPi fixes
+* Tue Aug 24 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.4.rc2
+- Fix for Raspberry Pi firmware properties

-* Fri May 01 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.07-0.1.rc1
- Update to 2026.07 RC1
+* Mon Aug 23 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.3.rc2
+- Fix for rockchip SPI

-* Sat Apr 11 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-2
- Fix PCIe/USB on Raspberry Pi 4 (rhbz#2448365)
- Fix detection of some revisions of RPi5
+* Mon Aug 16 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.2.rc2
+- Update to 2021.10 RC2

-* Tue Apr 07 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-1
- Update to 2026.04 GA
+* Sun Aug 08 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.10-0.1.rc1
+- Update to 2021.10 RC1

-* Sun Mar 29 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.9.rc5
- Enable NVME booting on RPi5
+* Thu Jul 22 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-2
+- Fix regression for Rockchip devices running firmware from SPI flash

-* Tue Mar 24 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.8.rc5
- Update to 2026.04 RC5
+* Mon Jul 05 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-1
+- Update to 2021.07 GA

-* Sat Mar 14 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.7.rc4
- Raspberry Pi fixes
+* Mon Jun 28 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.6.rc5
+- Update to 2021.07 RC5
+- Build SPI fash images for ROC-PC-RK3399

-* Tue Mar 10 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.6.rc4
- Update to 2026.04 RC4
+* Mon Jun 07 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.5.rc4
+- Update to 2021.07 RC4

-* Fri Feb 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.5.rc3
- Update to 2026.04 RC3
+* Sat Jun 05 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.4.rc3
+- Fix AllWinner devices booting from mSD/MMC

-* Tue Feb 17 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.4.rc2
- Add initial bcm2712d0 identification
+* Tue May 25 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.3.rc3
+- Update to 2021.07 RC3
+- Build against ATF 2.5 GA

-* Mon Feb 09 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.3.rc2
- Update to 2026.04 RC2
+* Thu May 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.2.rc2
+- Build against new ATF 2.5-rc1

-* Tue Jan 27 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.04-0.2.rc1
- Update to 2026.04 RC1
+* Mon May 10 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.07-0.1.rc2
+- Update to 2021.07 RC2

-* Mon Jan 19 2026 Javier Martinez Canillas <javierm@redhat.com> - 1:2026.01-3
- Add a uboot-images-x86_64 subpackage
+* Wed Apr 28 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-3
+- Upstream fix for console regression (rhbz 1946278)
+- Fix for fallback.efi crash (rhbz 1733817)

-* Sat Jan 17 2026 Fedora Release Engineering <releng@fedoraproject.org> - 1:2026.01-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_44_Mass_Rebuild
+* Wed Apr 21 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-2
+- Revert keyboard console regression change (rhbz 1946278)

-* Tue Jan 06 2026 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-1
- Update to 2026.01 GA
+* Sun Apr 18 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-1
+- Update to 2021.04 GA
+- Fix DTB load check (rhbz 1946278)
+- Build Rockchip SPI support as idbloader.spi
+- Fixes for Rockchip devices
+- Build Turris Omnia for MMC/SPI/UART

-* Mon Dec 29 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.4.rc5
- Update to 2026.01 RC5
+* Wed Mar 17 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.6.rc4
+- Update to 2021.04 RC4
+- Move to upstream fix for SMP on RPi3B and RPi3B+

-* Mon Dec 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.3.rc4
- Update to 2026.01 RC4
+* Sat Mar 13 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.5.rc3
+- Fix for SMP on RPi3B and RPi3B+
+- Initial support for Pinephone 3Gb edition

-* Fri Nov 28 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.2.rc3
- Updates for RPi
+* Mon Mar 08 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.4.rc3
+- Update to 2021.04 RC3

-* Mon Nov 24 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2026.01-0.1.rc3
- Update to 2026.01 RC3
+* Tue Feb 16 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.3.rc2
+- Update to 2021.04 RC2

-* Thu Oct 16 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-2
- Drop residual Rockchip firmware (saves ~150Mb)
+* Mon Feb 15 2021 Dennis Gilmore <dennis@ausil.us>
+- build spi and uart images in addition to mmc for helios4 and clearfog

-* Mon Oct 13 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-1
- Update to 2025.10 GA (rhbz#2401964)
- Fix booting when using FW device-tree (rhbz#2402498)
- Fix for some variants of Raspberry Pi
- Fixes for Jetson device booting
+* Wed Feb 10 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.2.rc1
+- Fixes for network issues on some Allwinner devices

-* Fri Sep 26 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.7.rc5
- Update to 2025.10 RC5
+* Mon Feb 01 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.04-0.1.rc1
+- Update to 2021.04 RC1
+- Add new upstream devices

-* Mon Sep 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.6.rc4
- Update to 2025.10 RC4
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2021.01-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

-* Sun Sep 07 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.5.rc3
- Boot fixes for some Raspberry Pi variants
+* Mon Jan 11 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-1
+- Update to 2021.01 GA
+- Updates for Raspberry Pi 4 Series of devices

-* Wed Aug 27 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.4.rc3
- Fix booting on some Allwinner devices
+* Tue Jan  5 2021 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.5.rc5
+- Update to 2021.01 RC5

-* Mon Aug 25 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.3.rc3
- Update to 2025.10 RC3
+* Sun Dec 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.4.rc4
+- Update to 2021.01 RC4
+- Latest RPi-400/CM4 support patch

-* Tue Aug 19 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.2.rc2
- Fix and re-enable Jetson Nano
+* Tue Dec 15 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.3.rc3
+- Update to 2021.01 RC3
+- Latest RPi-400/CM4 support patch
+- Re-enable previously disabled device support

-* Mon Aug 18 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.10-0.1.rc2
- Update to 2025.10 RC2
+* Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2
+- Fix a "scan_dev_for_efi" not defined error

-* Fri Jul 25 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:2025.07-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_43_Mass_Rebuild
+* Sun Nov 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.1.rc2
+- Update to 2021.01 RC2
+- Latest Pinebook Pro display patches
+- Initial RPi-400 support patch
+- Update Fedora specific patches

-* Thu Jul 10 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-2
- Update patch for rebase issue
+* Sun Nov  8 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-3
+- Fix SPI on Rockchip devices
+- Latest Pinebook Pro display patches
+- Fix Keyboard and USB-A ports on Pinebook Pro

-* Wed Jul 09 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-1
- Update to 2025.07 GA
+* Wed Oct 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-2
+- Fix kernel installs for non EBBR systems
+- Fix for wired networks on some Allwinner devices

-* Fri Jun 27 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.5.rc5
- Update to 2025.07 RC5
- Enable LWIP stack by default
- Enable HTTP(s) boot support
+* Tue Oct 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-1
+- Update to 2020.10

-* Thu Jun 26 2025 Javier Martinez Canillas <javierm@redhat.com> - 1:2025.07-0.4.rc4
- Add EFI_PARTITION_INFO_PROTOCOL support
+* Sun Sep 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.6.rc5
+- Initial support for display output on Pinebook Pro

-* Sun Jun 15 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.3.rc4
- Update to 2025.07 RC4
+* Tue Sep 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.5.rc5
+- Update to 2020.10 RC5

-* Tue May 13 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.2.rc2
- Update to 2025.07 RC2
+* Wed Sep 09 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.4.rc4
+- Update to 2020.10 RC4

-* Thu May 01 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.07-0.1.rc1
- Update to 2025.07 RC1
+* Wed Aug 19 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.3.rc2
+- Enable a number of new Rockchip devices

-* Sun Apr 20 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-2
- Fix for RPi5 serial console
+* Mon Aug 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.2.rc2
+- Update to 2020.10 RC2

-* Tue Apr 08 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-1
- Update to 2025.04 GA
+* Tue Jul 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.1.rc1
+- 2020.10 RC1

-* Tue Mar 25 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.7.rc5
- Update to 2025.04 RC5
+* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 2020.07-2
+- Use make macros
+- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro

-* Wed Mar 12 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.6.rc4
- Update to 2025.04 RC4
+* Mon Jul 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-1
+- 2020.07 GA

-* Wed Feb 26 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.5.rc3
- Update to 2025.04 RC3
+* Tue Jun 23 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.5.rc5
+- 2020.07 RC5

-* Tue Feb 18 2025 David Abdurachmanov <davidlt@rivosinc.com> - 1:2025.04-0.4.rc2
- Add support for riscv64
+* Thu Jun 18 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.4.rc4
+- Update various patches to latest upstream

-* Tue Feb 11 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.3.rc2
- Update to 2025.05 RC2
+* Wed Jun 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.3.rc4
+- 2020.07 RC4
+- Minor updates and other fixes

-* Tue Feb 11 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.04-0.2.rc1
- Update to 2025.05 RC1
+* Tue May 12 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.2.rc2
+- 2020.07 RC2
+- Minor device updates

-* Tue Jan 28 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-3
- Add new fdt_add_pubkey tool
+* Wed Apr 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.1.rc1
+- 2020.07 RC1

-* Sun Jan 19 2025 Fedora Release Engineering <releng@fedoraproject.org> - 1:2025.01-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_42_Mass_Rebuild
+* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-4
+- Initial support for USB on Rasperry Pi 4

-* Tue Jan 07 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-1
- Update to 2025.01 GA
+* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-3
+- Ship u-boot-rockchip.bin for SPI flash

-* Mon Jan 06 2025 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-0.2.rc6
- Rebuild for TF-A 2.12
+* Mon Apr 20 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-2
+- Fix ATF for new aarch64 devices
+- Fix Wandboard board detection (rhbz 1825247)
+- Fix mSD card on RockPro64
+- Enable (inital) Pinebook Pro

-* Tue Dec 31 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2025.01-0.1.rc6
- Update to 2025.01 RC6
+* Tue Apr 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-1
+- 2020.04

-* Fri Oct 11 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-1
- Update to 2024.10 GA
- Fix passing RPi firmware CMA setting to kernel DT
- Update Geekbox
+* Tue Apr  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.7-rc5
+- 2020.04 RC5

-* Thu Oct 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.8.rc6
- Pass CMA FW setting through to kernel DT for Raspberry Pi
+* Tue Mar 31 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.6-rc4
+- 2020.04 RC4
+- Updates for NVIDIA Jetson platforms
+- Support RNG for random seed for KASLR on some Rockchip devices

-* Tue Oct 01 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.7.rc6
- Update to 2024.10 RC6
+* Thu Mar 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.5-rc3
+- Fix ext4 alignment issue seen on some NXP i.MX devices

-* Mon Sep 16 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.6.rc5
- Update to 2024.10 RC5
+* Wed Feb 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.4-rc3
+- 2020.04 RC3

-* Fri Sep  6 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.5.rc4
- Add missing licenses directory
+* Thu Feb 13 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.3-rc2
+- 2020.04 RC2

-* Tue Sep 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.4.rc4
- Update to 2024.10 RC4
+* Sun Feb  2 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.2-rc1
+- Update genet NIC driver

-* Mon Sep 02 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.3.rc3
- Fix Allwinner firmware chainloading (rhbz#2309138)
- Fix ATF firmware selection on a number of devices
- Support Allwinner SCP firmware (fixes suspend/resume)
+* Wed Jan 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.1-rc1
+- 2020.04 RC1

-* Tue Aug 27 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.2.rc3
- Update to 2024.10 RC3
- Enable initial QCM6490 SoC support
-
-* Thu Aug 15 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.10-0.1.rc2
- Update to 2024.10 RC2
-
-* Tue Jul 23 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-1
- Update to 2024.07
-
-* Sat Jul 20 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:2024.07-0.3.rc4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
-
-* Tue Jun 18 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-0.2.rc4
- Update to 2024.07 RC4
-
-* Sat May 25 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.07-0.1.rc3
- Update to 2024.07 RC3
-
-* Wed Apr 03 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-1
- Update to 2024.04 GA
- Rockchip rk3328 USB fixes
-
-* Wed Mar 27 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.8.rc5
- Update to 2024.04 RC5
-
-* Thu Mar 21 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.7.rc4
- Updated patch for DTB loading
-
-* Fri Mar 15 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.6.rc4
- Updated fix for FDT load
-
-* Wed Mar 13 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.5.rc4
- Fixes for Rockchip rk3399 autoboot
-
-* Tue Mar 12 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.4.rc4
- Update to 2024.04 RC4
- Initial fix for loading DT off /boot (rhbz 2247873)
-
-* Thu Feb 29 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.3.rc3
- Update to 2024.04 RC3
- Enable a number of new upstream devices
- Upstream now builds Rockchip SPI artifacts
- Various cleanups
- Fix ESP partition detection to enable EFI vars
-
-* Wed Feb 14 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.04-0.2.rc2
- Update to 2024.04 RC2
-
-* Sat Jan 27 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:2024.01-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Mon Jan 08 2024 Peter Robinson <pbrobinson@fedoraproject.org> - 1:2024.01-1
- Update to 2024.01
+* Tue Jan  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-1
+- 2020.01
--- a/uefi-Add-all-options-for-EFI-System-Partitions.patch
+++ b/uefi-Add-all-options-for-EFI-System-Partitions.patch
@ -1,57 +0,0 @@
-From 86782e882e9542f5f402e00cd87efb36ad0552d3 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sat, 2 Mar 2024 11:17:42 +0000
-Subject: [PATCH v4] disk: dos: Add all options for EFI System Partitions
-
-The EFI spec states that the ESP can be any of FAT12/16/32 but for
-compatibility doesn't necssarily require the partition to be the
-EFI partition table ID of 0xef. A number of arm devices will not
-find their firmware on a FAT partition with an ID of 0xef so also
-allow the original FAT12/16/32 partition IDs as they are also
-permissable for an ESP.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
-
-v2:
- Add 0x0c option
- Make hex constants consistent
- Move from if to switch statement
-v3:
- Fix switch brain fart
-v4:
- Drop boot_ind out of switch
-
- disk/part_dos.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
-diff --git a/disk/part_dos.c b/disk/part_dos.c
-index 567ead7511d..a35181dff4f 100644
--- a/disk/part_dos.c
-+++ b/disk/part_dos.c
-@@ -40,10 +40,21 @@ static int get_bootable(dos_partition_t *p)
- {
- 	int ret = 0;
- 
-	if (p->sys_ind == 0xef)
-+	switch (p->sys_ind) {
-+	case 0x01:
-+	case 0x06:
-+	case 0x0b:
-+	case 0x0c:
-+	case 0xef:
- 		ret |= PART_EFI_SYSTEM_PARTITION;
-+		break;
-+	default:
-+		break;
-+	}
-+
- 	if (p->boot_ind == 0x80)
- 		ret |= PART_BOOTABLE;
-+
- 	return ret;
- }
- 
-- 
-2.44.0
-
--- a/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
+++ b/uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
@ -1,6 +1,6 @@
-From 4306c538d4a00dd1aa46c55c3c4005c2b0bf7cd5 Mon Sep 17 00:00:00 2001
+From fd3434c754b3b8dddb345352a2434b6b8445343a Mon Sep 17 00:00:00 2001
 From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 24 Nov 2022 12:57:55 +0000
+Date: Sun, 18 Apr 2021 14:05:45 +0100
 Subject: [PATCH] distro: load FDT from any partition on boot device

 In the EFI_LOADER boot path, we were only checking the FAT partition
@ -22,14 +22,14 @@ knows) and SoC/board specific ${fdtfile} (which grub does not know).
 Signed-off-by: Rob Clark <robdclark@gmail.com>
 Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
 ---
- include/config_distro_bootcmd.h | 37 +++++++++++++++++++++------------
- 1 file changed, 24 insertions(+), 13 deletions(-)
+ include/config_distro_bootcmd.h | 35 ++++++++++++++++++++++-----------
+ 1 file changed, 23 insertions(+), 12 deletions(-)

 diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index fcb319a20ae..e71004fad9c 100644
+index 2627c2a6a5..eadd1080b3 100644
 --- a/include/config_distro_bootcmd.h
 +++ b/include/config_distro_bootcmd.h
-@@ -155,28 +155,39 @@
+@@ -148,26 +148,37 @@
 		"fi\0"                                                    \
 	\
 	"load_efi_dtb="                                                   \
@ -44,13 +44,11 @@ index fcb319a20ae..e71004fad9c 100644
 +	"scan_dev_for_dtb="                                               \
 		"setenv efi_fdtfile ${fdtfile}; "                         \
 		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
- 		BOOTENV_RUN_EXTENSION_INIT                                \
 -		"for prefix in ${efi_dtb_prefixes}; do "                  \
 -			"if test -e ${devtype} "                          \
 -					"${devnum}:${distro_bootpart} "   \
 -					"${prefix}${efi_fdtfile}; then "  \
 -				"run load_efi_dtb; "                      \
-				BOOTENV_RUN_EXTENSION_APPLY               \
 -			"fi;"                                             \
 -		"done;"                                                   \
 -		"run boot_efi_bootmgr;"                                   \
@ -67,7 +65,6 @@ index fcb319a20ae..e71004fad9c 100644
 +						"${devnum}:${dtb_devp} "  \
 +						"${prefix}${efi_fdtfile};"\
 +					"run load_efi_dtb; "              \
-+					BOOTENV_RUN_EXTENSION_APPLY       \
 +				"fi;"                                     \
 +			"done; "                                          \
 +		"done; "                                                  \
@ -83,5 +80,5 @@ index fcb319a20ae..e71004fad9c 100644
 		"fi; "                                                    \
 		"setenv efi_fdtfile\0"
 -- 
-2.38.1
+2.31.1

--- a/uefi-enable-SetVariableRT-with-volotile-storage.patch
+++ b/uefi-enable-SetVariableRT-with-volotile-storage.patch
@ -1,33 +0,0 @@
-From fd736dd720b29fa69a4bb87492f3f94dc6076996 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 25 Mar 2025 17:13:44 +0000
-Subject: [PATCH] efi: enable SetVariableRT with volotile storage
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- lib/efi_loader/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
-index d4f6b56afaa..3e522131b01 100644
--- a/lib/efi_loader/Kconfig
-+++ b/lib/efi_loader/Kconfig
-@@ -108,6 +108,7 @@ choice
- config EFI_VARIABLE_FILE_STORE
- 	bool "Store non-volatile UEFI variables as file"
- 	depends on FAT_WRITE
-+	default y
- 	help
- 	  Select this option if you want non-volatile UEFI variables to be
- 	  stored as file /ubootefi.var on the EFI system partition.
-@@ -115,6 +116,7 @@ config EFI_VARIABLE_FILE_STORE
- config EFI_RT_VOLATILE_STORE
- 	bool "Allow variable runtime services in volatile storage (e.g RAM)"
- 	depends on EFI_VARIABLE_FILE_STORE
-+	default y
- 	help
- 	  When EFI variables are stored on file we don't allow SetVariableRT,
- 	  since the OS doesn't know how to write that file. At the same time
-- 
-2.49.0
-
--- a/uefi-enable-https-boot-by-default.patch
+++ b/uefi-enable-https-boot-by-default.patch
@ -1,82 +0,0 @@
-From 7eabab2fda12b7a4417e5c7f29a507dfa9e7fffd Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 3 May 2026 09:24:34 +0100
-Subject: [PATCH] enable https boot by default
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- cmd/Kconfig            | 1 +
- lib/efi_loader/Kconfig | 1 +
- lib/mbedtls/Kconfig    | 3 ++-
- net/Kconfig            | 3 ++-
- 4 files changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/cmd/Kconfig b/cmd/Kconfig
-index c71c6824a19..8ff14adffe1 100644
--- a/cmd/Kconfig
-+++ b/cmd/Kconfig
-@@ -2289,6 +2289,7 @@ config CMD_WGET
- 
- config WGET_HTTPS
- 	bool "wget https"
-+	default y
- 	depends on CMD_WGET
- 	depends on PROT_TCP_LWIP
- 	depends on MBEDTLS_LIB
-diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
-index 4cb13ae7c8a..20733429962 100644
--- a/lib/efi_loader/Kconfig
-+++ b/lib/efi_loader/Kconfig
-@@ -609,6 +609,7 @@ config EFI_BOOTMGR
- 
- config EFI_HTTP_BOOT
- 	bool "EFI HTTP Boot support"
-+	default y
- 	depends on NET
- 	depends on CMDLINE
- 	select CMD_NET
-diff --git a/lib/mbedtls/Kconfig b/lib/mbedtls/Kconfig
-index 789721ee6cd..7a241c2bc26 100644
--- a/lib/mbedtls/Kconfig
-+++ b/lib/mbedtls/Kconfig
-@@ -2,7 +2,7 @@
- 
- choice
- 	prompt "Crypto libraries (U-Boot Proper)"
-	default LEGACY_HASHING_AND_CRYPTO
-+	default MBEDTLS_LIB
- 	help
- 	  Select crypto libraries.
- 	  LEGACY_HASHING_AND_CRYPTO for legacy crypto libraries,
-@@ -15,6 +15,7 @@ config LEGACY_HASHING_AND_CRYPTO
- 
- config MBEDTLS_LIB
- 	bool "MbedTLS libraries"
-+	default y
- 	select MBEDTLS_LIB_X509
- endchoice
- 
-diff --git a/net/Kconfig b/net/Kconfig
-index e712a0dd2ac..3158d37dff7 100644
--- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -16,7 +16,7 @@ if NET
- 
- choice
- 	prompt "Networking stack"
-	default NET_LEGACY
-+	default NET_LWIP
- 
- config NET_LEGACY
- 	bool "Legacy U-Boot networking stack"
-@@ -27,6 +27,7 @@ config NET_LEGACY
- 
- config NET_LWIP
- 	bool "Use lwIP for networking stack"
-+	default y
- 	select NETDEVICES
- 	help
- 	  Include networking support based on the lwIP (lightweight IP)
-- 
-2.54.0
-
--- a/uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch
+++ b/uefi-initial-find_fdt_location-for-finding-the-DT-on-disk.patch
@ -1,190 +0,0 @@
-From 56a985cec8592a8de88e7f254df82f5d444a5ecc Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 28 May 2026 22:08:07 +0100
-Subject: [PATCH] initial find_fdt_location for finding the DT on disk
-
-The old distro boot looked for a DT on the first boot partition
-in the /dtb or /dtb/current directories, and Fedora extended this
-to look not just on the boot partition but all the partitions on
-that disk.
-
-The new ways of booting, both bootstd and bootefi bootmgr processes
-don't properly look for those options. This provides a function
-to search for the DTB on disk so that if the other DT mechanisms
-don't work this will look for one on disk to provide a working DT
-so that devices will continue to work as they did previously.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
- cmd/bootmenu.c              |   5 ++
- include/efi_loader.h        |   2 +
- lib/efi_loader/efi_helper.c | 106 +++++++++++++++++++++++++++++++++++-
- 3 files changed, 112 insertions(+), 1 deletion(-)
-
-diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c
-index 528afd221d0..a10ea35a687 100644
--- a/cmd/bootmenu.c
-+++ b/cmd/bootmenu.c
-@@ -502,6 +502,11 @@ static void handle_uefi_bootnext(void)
- 	u16 bootnext;
- 	efi_status_t ret;
- 	efi_uintn_t size;
-+	const char *fdt_opt;
-+
-+	/* Find the DTB on disk */
-+	log_debug("We will load the DTB\n");
-+	fdt_opt = find_fdt_location();
- 
- 	/* Initialize EFI drivers */
- 	ret = efi_init_obj_list();
-diff --git a/include/efi_loader.h b/include/efi_loader.h
-index 3a4d502631c..b11f8a2cb42 100644
--- a/include/efi_loader.h
-+++ b/include/efi_loader.h
-@@ -574,6 +574,8 @@ struct efi_register_notify_event {
- 	struct list_head handles;
- };
- 
-+/* Find the FDT on any partition */
-+char *find_fdt_location(void);
- /* called at pre-initialization */
- int efi_init_early(void);
- /* Initialize efi execution environment */
-diff --git a/lib/efi_loader/efi_helper.c b/lib/efi_loader/efi_helper.c
-index 44b806aadc4..61e982091b9 100644
--- a/lib/efi_loader/efi_helper.c
-+++ b/lib/efi_loader/efi_helper.c
-@@ -15,6 +15,7 @@
- #include <mapmem.h>
- #include <dm.h>
- #include <fs.h>
-+#include <part.h>
- #include <efi.h>
- #include <efi_api.h>
- #include <efi_load_initrd.h>
-@@ -98,6 +99,99 @@ int efi_get_pxe_arch(void)
- 	return -EINVAL;
- }
- 
-+/* We need to pass a blk device in and return a location, or a loaded DT */
-+char *find_fdt_location(void)
-+{
-+	const char *fdt_filename;
-+	/* FIXME: dynamic size */
-+	char fdt_fullpath[60];
-+	const char *prefix;
-+	struct udevice *blk;
-+	/* FIXME: Fedora really only cares about first 2*/
-+	int MAX_PART = 8;
-+	int part;
-+	struct disk_partition info;
-+	int fdtext;
-+	int ret;
-+	int retfdt;
-+	int retload;
-+	loff_t fdtsize;
-+	ulong pbraddr;
-+	loff_t len_read;
-+
-+	/* step one logic: we have the DT name we're hunting for */
-+	fdt_filename = env_get("fdtfile");
-+	if (fdt_filename) {
-+		log_debug("FFL: We're looking for the DTB now!: %s\n", fdt_filename);
-+
-+		/* probe all block disks to search for fdt */
-+		uclass_foreach_dev_probe(UCLASS_BLK, blk) {
-+			log_debug("FFL: dev name: %s\n", blk->name);
-+			struct blk_desc *desc;
-+			desc = dev_get_uclass_plat(blk);
-+			/* we should get a partition count here for looping */
-+			/* For loop for each partition */
-+			/* Need to also deal with zero part whole disk - part_get_info_whole_disk */
-+			for (part = 1; part <= MAX_PART; part++) {
-+				log_debug("FFL: part num: %d\n", part);
-+				ret = part_get_info(desc, part, &info);
-+				/* if we have partition check it for DT */
-+				if (ret < 0) {
-+					log_debug("FFL: no partition\n");
-+				} else {
-+					log_debug("FFL: we have a partition\n");
-+					/* we should have a case/for prefix in =/ /dtb/ /dtb/current/ */
-+					/* but for now we hard code if for Fedora */
-+					prefix = "/dtb";
-+					snprintf(fdt_fullpath, sizeof(fdt_fullpath), "%s/%s", prefix, fdt_filename);
-+					log_debug("FFL: full name: %s\n", fdt_fullpath);
-+					/* search for DT on partition and either find and exit or continue */
-+					if (fs_set_blk_dev_with_part(desc, part) == 0){
-+						log_debug("FFL: set block part pass\n");
-+						fdtext = fs_exists(fdt_fullpath);
-+						if (fdtext) {
-+							/* we have a fdt!*/
-+							if (fs_set_blk_dev_with_part(desc, part) == 0){
-+								retfdt = fs_size(fdt_fullpath, &fdtsize);
-+								if (retfdt == 0) {
-+									log_debug("FFL: we have found a DT on disk, size %lld\n", fdtsize);
-+									/* Get the main fdt and map it */
-+									const char *fdt_pbr;
-+									fdt_pbr = env_get("fdt_addr_r");
-+									pbraddr = hextoul(fdt_pbr, NULL);
-+									log_debug("FFL: fdr addr: %s\n", fdt_pbr);
-+									if (fs_set_blk_dev_with_part(desc, part) == 0){
-+										retload = fs_read(fdt_fullpath, pbraddr, 0, fdtsize, &len_read);
-+										if (retload == 0) {
-+											log_debug("FFL: we have a loaded DT, size %lld we can return\n", fdtsize);
-+											log_info("Found DTB: %s\n", fdt_filename);
-+											return fdt_pbr;
-+										} else {
-+											log_debug("FFL: DT load failed\n");
-+										}
-+									}
-+								} else {
-+									log_debug("FFL: we DON'T have a DT with size\n");
-+								}
-+							}
-+						} else {
-+							/* we don't have a fdt!*/
-+							log_debug("FFL: we DON'T have a DT\n");
-+						}
-+					} else {
-+						log_debug("FFL: set block part FAIL\n");
-+					}
-+				}
-+			}
-+		}
-+        } else {
-+		log_debug("FFL: fdt_filename not defined!!\n");
-+	}
-+
-+	/* We didn't find a FDT */
-+	return NULL;
-+}
-+
- /**
-  * efi_create_current_boot_var() - Return Boot#### name were #### is replaced by
-  *			           the value of BootCurrent
-@@ -558,11 +652,21 @@ efi_status_t efi_install_fdt(void *fdt)
- 		const char *fdt_opt;
- 		uintptr_t fdt_addr;
- 
-+		/* Check if there is device tree loaded from disk */
-+		fdt_opt = find_fdt_location();
-+		if (fdt_opt)
-+			log_info("Found DTB on disk\n");
-+
- 		/* Check if there is a hardware device tree */
-		fdt_opt = env_get("fdt_addr");
-+		if (!fdt_opt) {
-+			fdt_opt = env_get("fdt_addr");
-+			if (fdt_opt)
-+				log_info("Found DTB: Prior firmware\n");
-+		}
- 		/* Use our own device tree as fallback */
- 		if (!fdt_opt) {
- 			fdt_opt = env_get("fdtcontroladdr");
-+			log_info("Using DT from U-Boot\n");
- 			if (!fdt_opt) {
- 				log_err("need device tree\n");
- 				return EFI_NOT_FOUND;
-- 
-2.54.0
-
--- a/1
+++ b/1
@ -1 +0,0 @@
-qemu-x86_64
Author	SHA1	Message	Date
Peter Robinson	99257f551e	Merge branch 'rawhide' into f35	2021-11-15 18:25:59 +00:00
Peter Robinson	67440bb409	Merge branch 'rawhide' into f35	2021-10-17 22:51:54 +01:00
Peter Robinson	be937adc4a	Merge branch 'rawhide' into f35	2021-10-04 19:03:27 +01:00
Peter Robinson	cb422ef36c	2021.10 RC5	2021-10-04 08:20:34 +01:00
Peter Robinson	346fc7533f	rpi4 USB fix for some devices	2021-09-15 15:34:17 +01:00
Peter Robinson	677db9a5f7	U-Boot device firmwares don't currently support LTO	2021-09-15 15:30:06 +01:00
Peter Robinson	51c20a4dae	2021.10 RC4, RPi MMC clk fix	2021-09-15 07:59:14 +01:00